tsl2550: Move from i2c/chips to misc

Move the last remaining driver from i2c/chips to misc. Good ridance!

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>

drivers/i2c/Kconfig

@@ -73,7 +73,6 @@ config I2C_SMBUS
 
 source drivers/i2c/algos/Kconfig
 source drivers/i2c/busses/Kconfig
-source drivers/i2c/chips/Kconfig
 
 config I2C_DEBUG_CORE
 	bool "I2C Core debugging messages"

drivers/i2c/Makefile

@@ -6,7 +6,7 @@ obj-$(CONFIG_I2C_BOARDINFO)	+= i2c-boardinfo.o
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
-obj-y				+= busses/ chips/ algos/
+obj-y				+= algos/ busses/
 
 ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
 EXTRA_CFLAGS += -DDEBUG

drivers/i2c/chips/Kconfig

@@ -1,19 +0,0 @@
-#
-# Miscellaneous I2C chip drivers configuration
-#
-# *** DEPRECATED! Do not add new entries! See Makefile ***
-#
-
-menu "Miscellaneous I2C Chip support"
-
-config SENSORS_TSL2550
-	tristate "Taos TSL2550 ambient light sensor"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get support for the Taos TSL2550
-	  ambient light sensor.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called tsl2550.
-
-endmenu

drivers/i2c/chips/Makefile

@@ -1,18 +0,0 @@
-#
-# Makefile for miscellaneous I2C chip drivers.
-#
-# Do not add new drivers to this directory! It is DEPRECATED.
-#
-# Device drivers are better grouped according to the functionality they
-# implement rather than to the bus they are connected to. In particular:
-# * Hardware monitoring chip drivers go to drivers/hwmon
-# * RTC chip drivers go to drivers/rtc
-# * I/O expander drivers go to drivers/gpio
-#
-
-obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
-
-ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
-

drivers/misc/Kconfig

@@ -268,6 +268,16 @@ config ISL29003
 	  This driver can also be built as a module.  If so, the module
 	  will be called isl29003.
 
+config SENSORS_TSL2550
+	tristate "Taos TSL2550 ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the Taos TSL2550
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2550.
+
 config EP93XX_PWM
 	tristate "EP93xx PWM support"
 	depends on ARCH_EP93XX

drivers/misc/Makefile

@@ -21,6 +21,7 @@ obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
+obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
 obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o

drivers/i2c/chips/tsl2550.c → drivers/misc/tsl2550.c

@@ -47,8 +47,8 @@ struct tsl2550_data {
 	struct i2c_client *client;
 	struct mutex update_lock;
 
-	unsigned int power_state : 1;
-	unsigned int operating_mode : 1;
+	unsigned int power_state:1;
+	unsigned int operating_mode:1;
 };
 
 /*