Staging: rt2860: remove CONFIG_STA_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt2860/2860_main_dev.c

@@ -103,13 +103,10 @@ static struct pci_device_id rt2860_pci_tbl[] __devinitdata =
 };
 
 MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl);
-#ifdef CONFIG_STA_SUPPORT
 MODULE_LICENSE("GPL");
 #ifdef MODULE_VERSION
 MODULE_VERSION(STA_DRIVER_VERSION);
 #endif
-#endif // CONFIG_STA_SUPPORT //
-
 
 //
 // Our PCI driver structure
@@ -479,10 +476,9 @@ static void rx_done_tasklet(unsigned long data)
     pObj = (POS_COOKIE) pAd->OS_Cookie;
 
 	pAd->int_pending &= ~(INT_RX);
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		bReschedule = STARxDoneInterruptHandle(pAd, 0);
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_INT_LOCK(&pAd->irq_lock, flags);
 	/*
@@ -918,15 +914,11 @@ rt2860_interrupt(int irq, void *dev_instance)
 		RTMPHandleTBTTInterrupt(pAd);
 	}
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (IntSource.word & AutoWakeupInt)
 			RTMPHandleTwakeupInterrupt(pAd);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
     return  IRQ_HANDLED;
 }
@@ -1195,7 +1187,6 @@ VOID RT28xx_UpdateBeaconToAsic(
 
 }
 
-#ifdef CONFIG_STA_SUPPORT
 VOID RTMPInitPCIeLinkCtrlValue(
 	IN	PRTMP_ADAPTER	pAd)
 {
@@ -1239,7 +1230,6 @@ VOID RTMPPCIeLinkCtrlSetting(
 	IN 	USHORT		Max)
 {
 }
-#endif // CONFIG_STA_SUPPORT //
 
 VOID rt2860_stop(struct net_device *net_dev)
 {

drivers/staging/rt2860/Makefile

@@ -2,7 +2,6 @@ obj-$(CONFIG_RT2860)	+= rt2860sta.o
 
 # TODO: all of these should be removed
 EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
-EXTRA_CFLAGS += -DCONFIG_STA_SUPPORT
 EXTRA_CFLAGS += -DDBG
 EXTRA_CFLAGS += -DDOT11_N_SUPPORT
 EXTRA_CFLAGS += -DWPA_SUPPLICANT_SUPPORT

drivers/staging/rt2860/common/action.c

@@ -128,7 +128,6 @@ VOID MlmeADDBAAction(
 			pBAEntry =&pAd->BATable.BAOriEntry[Idx];
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (ADHOC_ON(pAd))
@@ -136,7 +135,6 @@ VOID MlmeADDBAAction(
 			else
 				ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pInfo->pAddr);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		Frame.Category = CATEGORY_BA;
 		Frame.Action = ADDBA_REQ;
@@ -211,10 +209,9 @@ VOID MlmeDELBAAction(
 
 		// SEND BAR (Send BAR to refresh peer reordering buffer.)
 		Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
 
 		FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
 		FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton.
@@ -232,7 +229,7 @@ VOID MlmeDELBAAction(
 
 		// SEND DELBA FRAME
 		FrameLen = 0;
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (ADHOC_ON(pAd))
@@ -240,7 +237,7 @@ VOID MlmeDELBAAction(
 			else
 				ActHeaderInit(pAd, &Frame.Hdr,  pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[pInfo->Wcid].Addr);
 		}
-#endif // CONFIG_STA_SUPPORT //
+
 		Frame.Category = CATEGORY_BA;
 		Frame.Action = DELBA;
 		Frame.DelbaParm.Initiator = pInfo->Initiator;
@@ -367,7 +364,6 @@ static VOID respond_ht_information_exchange_action(
 
 	NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
 	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
@@ -375,7 +371,6 @@ static VOID respond_ht_information_exchange_action(
 		else
 			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	HTINFOframe.Category = CATEGORY_HT;
 	HTINFOframe.Action = HT_INFO_EXCHANGE;
@@ -404,7 +399,7 @@ VOID PeerHTAction(
 	{
 		case NOTIFY_BW_ACTION:
 			DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Notify Channel bandwidth action----> \n"));
-#ifdef CONFIG_STA_SUPPORT
+
 			if(pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
 			{
 				// Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps
@@ -414,7 +409,6 @@ VOID PeerHTAction(
 								Elem->Msg[LENGTH_802_11+2] ));
 				break;
 			}
-#endif // CONFIG_STA_SUPPORT //
 
 			if (Elem->Msg[LENGTH_802_11+2] == 0)	// 7.4.8.2. if value is 1, keep the same as supported channel bandwidth.
 				pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0;
@@ -534,10 +528,9 @@ VOID SendRefreshBAR(
 			}
 
 			Sequence = pEntry->TxSeq[TID];
-#ifdef CONFIG_STA_SUPPORT
+
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
 
 			FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
 			FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.

drivers/staging/rt2860/common/ba_action.c

@@ -132,10 +132,8 @@ void Announce_Reordering_Packet(IN PRTMP_ADAPTER			pAd,
 		// pass this 802.3 packet to upper layer or forward this packet to WM directly
 		//
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 
@@ -610,11 +608,8 @@ VOID BAOriSessionAdd(
 			return;
 		}
 
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
 
 		FrameBar.StartingSeq.field.FragNum = 0;	// make sure sequence not clear in DEL function.
 		FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
@@ -1083,14 +1078,12 @@ VOID BAOriSessionSetupTimeout(
 
 	pAd = pBAEntry->pAdapter;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Do nothing if monitor mode is on
 		if (MONITOR_ON(pAd))
 			return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
 
@@ -1223,8 +1216,8 @@ VOID PeerAddBAReqAction(
 	}
 
 	NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
+
 	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
@@ -1232,7 +1225,7 @@ VOID PeerAddBAReqAction(
 		else
 			ActHeaderInit(pAd, &ADDframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	ADDframe.Category = CATEGORY_BA;
 	ADDframe.Action = ADDBA_RESP;
 	ADDframe.Token = pAddreqFrame->Token;
@@ -1299,9 +1292,7 @@ VOID PeerAddBARspAction(
 		}
 		// Rcv Decline StatusCode
 		if ((pFrame->StatusCode == 37)
-#ifdef CONFIG_STA_SUPPORT
             || ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd) && (pFrame->StatusCode != 0))
-#endif // CONFIG_STA_SUPPORT //
             )
 		{
 			pAd->MacTab.Content[Elem->Wcid].BADeclineBitmap |= 1<<pFrame->BaParm.TID;
@@ -1422,10 +1413,9 @@ VOID SendPSMPAction(
 		DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
 		return;
 	}
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
-#endif // CONFIG_STA_SUPPORT //
 
 	Frame.Category = CATEGORY_HT;
 	Frame.Action = SMPS_ACTION;
@@ -1490,10 +1480,8 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
 
 	ASSERT(pRxBlk->pRxPacket);
 	pRxPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
@@ -1508,15 +1496,12 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
 	//
 	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 #ifdef LINUX
 			NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
 #endif
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 

drivers/staging/rt2860/common/cmm_data.c

@@ -339,15 +339,13 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 		return NDIS_STATUS_FAILURE;
 	}
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// outgoing frame always wakeup PHY to prevent frame lost
 		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
 			AsicForceWakeup(pAd, FROM_TX);
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	pFirstTxWI	=(PTXWI_STRUC)pSrcBufVA;
 
 	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXWI_SIZE);
@@ -377,7 +375,7 @@ NDIS_STATUS MlmeHardTransmitTxRing(
 	//
 	//
 	// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-#ifdef CONFIG_STA_SUPPORT
+
     // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
 	if (pHeader_802_11->FC.Type != BTYPE_DATA)
     {
@@ -390,7 +388,6 @@ NDIS_STATUS MlmeHardTransmitTxRing(
     		pHeader_802_11->FC.PwrMgmt = pAd->CommonCfg.bAPSDForcePowerSave;
     	}
     }
-#endif // CONFIG_STA_SUPPORT //
 
 	bInsertTimestamp = FALSE;
 	if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
@@ -504,14 +501,12 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		return NDIS_STATUS_FAILURE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// outgoing frame always wakeup PHY to prevent frame lost
 		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
 			AsicForceWakeup(pAd, FROM_TX);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA +  TXINFO_SIZE);
 	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
@@ -535,7 +530,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
@@ -551,7 +545,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 				pAd->CommonCfg.MlmeTransmit.field.MODE = 0;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	//
 	// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
@@ -561,7 +554,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 	// pHeader_802_11->FC.PwrMgmt = 0; // (pAd->StaCfg.Psm == PWR_SAVE);
 	//
 	// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-#ifdef CONFIG_STA_SUPPORT
+
     // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
 	if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
 	{
@@ -571,18 +564,15 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		else
 			pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	bInsertTimestamp = FALSE;
 	if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
 	{
-#ifdef CONFIG_STA_SUPPORT
 		//Set PM bit in ps-poll, to fix WLK 1.2  PowerSaveMode_ext failure issue.
 		if ((pAd->OpMode == OPMODE_STA) && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL))
 		{
 			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
 		}
-#endif // CONFIG_STA_SUPPORT //
 		bAckRequired = FALSE;
 	}
 	else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
@@ -845,8 +835,6 @@ BOOLEAN RTMP_FillTxBlkInfo(
 			TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired);
 
 		{
-
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			{
 
@@ -854,7 +842,6 @@ BOOLEAN RTMP_FillTxBlkInfo(
 				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
 					TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
 			}
-#endif // CONFIG_STA_SUPPORT //
 		}
 
 		if (pTxBlk->TxFrameType == TX_LEGACY_FRAME)
@@ -934,13 +921,10 @@ BOOLEAN CanDoAggregateTransmit(
 		return FALSE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
 		return TRUE;
 	else
-#endif // CONFIG_STA_SUPPORT //
 		return FALSE;
-
 }
 
 
@@ -1133,10 +1117,8 @@ VOID RTMPDeQueuePacket(
 			Count += pTxBlk->TxPacketList.Number;
 
 				// Do HardTransmit now.
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
-#endif // CONFIG_STA_SUPPORT //
 
 			DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
 			// static rate also need NICUpdateFifoStaCounters() function.
@@ -2178,7 +2160,6 @@ UINT deaggregate_AMSDU_announce(
 		// convert to 802.3 header
         CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize, pRemovedLLCSNAP);
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((Header802_3[12] == 0x88) && (Header802_3[13] == 0x8E) )
 		{
 		    // avoid local heap overflow, use dyanamic allocation
@@ -2188,9 +2169,7 @@ UINT deaggregate_AMSDU_announce(
 		   WpaEAPOLKeyAction(pAd, Elem);
 		   kfree(Elem);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 	        	if (pRemovedLLCSNAP)
@@ -2200,15 +2179,12 @@ UINT deaggregate_AMSDU_announce(
 	    			NdisMoveMemory(pPayload, &Header802_3[0], LENGTH_802_3);
 	        	}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize);
 		if (pClonePacket)
 		{
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
 		}
 
 
@@ -2304,11 +2280,11 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 		return NULL;
 
 	FirstWcid = 1;
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 	if (pAd->StaCfg.BssType == BSS_INFRA)
 		FirstWcid = 2;
-#endif // CONFIG_STA_SUPPORT //
 
 	// allocate one MAC entry
 	NdisAcquireSpinLock(&pAd->MacTabLock);
@@ -2331,8 +2307,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 				pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
 			}
 			{
-
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->ValidAsCLI = TRUE;
@@ -2341,7 +2315,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 					pEntry->ValidAsMesh = FALSE;
 					pEntry->ValidAsDls = FALSE;
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 
 			pEntry->bIAmBadAtheros = FALSE;
@@ -2362,8 +2335,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 				pEntry->apidx = apidx;
 
 			{
-
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->AuthMode = pAd->StaCfg.AuthMode;
@@ -2371,19 +2342,18 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 					pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
 					AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)i);
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 
 			pEntry->GTKState = REKEY_NEGOTIATING;
 			pEntry->PairwiseKey.KeyLen = 0;
 			pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
-#ifdef CONFIG_STA_SUPPORT
+
 			if ((pAd->OpMode == OPMODE_STA) &&
 				(pAd->StaCfg.BssType == BSS_ADHOC))
 				pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
 			else
-#endif // CONFIG_STA_SUPPORT //
 			pEntry->PortSecured = WPA_802_1X_PORT_NOT_SECURED;
+
 			pEntry->PMKID_CacheIdx = ENTRY_NOT_FOUND;
 			COPY_MAC_ADDR(pEntry->Addr, pAddr);
 			pEntry->Sst = SST_NOT_AUTH;
@@ -2858,10 +2828,8 @@ VOID Indicate_Legacy_Packet(
 	// 2. remove LLC
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pRxBlk->DataSize > MAX_RX_PKT_LEN)
 	{
@@ -2880,11 +2848,8 @@ VOID Indicate_Legacy_Packet(
 	//
 	// pass this 802.3 packet to upper layer or forward this packet to WM directly
 	//
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 
@@ -2947,11 +2912,8 @@ VOID CmmRxRalinkFrameIndicate(
 	}
 
 	// get 802.3 Header and  remove LLC
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
 
 	ASSERT(pRxBlk->pRxPacket);
 
@@ -2961,10 +2923,9 @@ VOID CmmRxRalinkFrameIndicate(
 	Payload2Size = Msdu2Size - LENGTH_802_3;
 
 	pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3;
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
 
 	if (!pPacket2)
 	{
@@ -2977,17 +2938,13 @@ VOID CmmRxRalinkFrameIndicate(
 	pRxBlk->DataSize = Payload1Size;
 	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pPacket2)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 
@@ -3130,15 +3087,12 @@ VOID Indicate_EAPOL_Packet(
 {
 	MAC_TABLE_ENTRY *pEntry = NULL;
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pEntry = &pAd->MacTab.Content[BSSID_WCID];
 		STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
 		return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pEntry == NULL)
 	{

drivers/staging/rt2860/common/cmm_data_2860.c

@@ -386,8 +386,6 @@ int RtmpPCIMgmtKickOut(
 	return 0;
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 /*
 	========================================================================
 
@@ -1041,8 +1039,6 @@ VOID  RadioOnExec(
 	}
 }
 
-#endif // CONFIG_STA_SUPPORT //
-
 VOID RT28xxPciMlmeRadioOn(
 	IN PRTMP_ADAPTER pAd)
 {
@@ -1076,7 +1072,6 @@ VOID RT28xxPciMlmeRadioOn(
 	    RTMPSetLED(pAd, LED_RADIO_ON);
     }
 
-#ifdef CONFIG_STA_SUPPORT
     if ((pAd->OpMode == OPMODE_STA) &&
         (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)))
     {
@@ -1089,7 +1084,6 @@ VOID RT28xxPciMlmeRadioOn(
     	RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer,	&Cancelled);
     	RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
     }
-#endif // CONFIG_STA_SUPPORT //
 }
 
 VOID RT28xxPciMlmeRadioOFF(
@@ -1112,7 +1106,6 @@ VOID RT28xxPciMlmeRadioOFF(
 	// Set LED
 	RTMPSetLED(pAd, LED_RADIO_OFF);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
     {
     	BOOLEAN		Cancelled;
@@ -1162,7 +1155,6 @@ VOID RT28xxPciMlmeRadioOFF(
 			return;
 		}
     }
-#endif // CONFIG_STA_SUPPORT //
 
 	// Set Radio off flag
 	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);

drivers/staging/rt2860/common/cmm_info.c

@@ -133,11 +133,9 @@ INT	Show_IEEE80211H_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf);
 
-#ifdef CONFIG_STA_SUPPORT
 INT	Show_NetworkType_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf);
-#endif // CONFIG_STA_SUPPORT //
 
 INT	Show_AuthMode_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -207,9 +205,7 @@ static struct {
 	{"WmmCapable",				Show_WmmCapable_Proc},
 #endif
 	{"IEEE80211H",				Show_IEEE80211H_Proc},
-#ifdef CONFIG_STA_SUPPORT
     {"NetworkType",				Show_NetworkType_Proc},
-#endif // CONFIG_STA_SUPPORT //
 	{"AuthMode",				Show_AuthMode_Proc},
 	{"EncrypType",				Show_EncrypType_Proc},
 	{"DefaultKeyID",			Show_DefaultKeyID_Proc},
@@ -233,11 +229,8 @@ INT Set_DriverVersion_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
 
     return TRUE;
 }
@@ -347,8 +340,6 @@ INT	Set_WirelessMode_Proc(
 
 	WirelessMode = simple_strtol(arg, 0, 10);
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		INT MaxPhyMode = PHY_11G;
@@ -385,7 +376,6 @@ INT	Set_WirelessMode_Proc(
 			success = FALSE;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// it is needed to set SSID to take effect
 	if (success == TRUE)
@@ -423,7 +413,6 @@ INT	Set_Channel_Proc(
 	// check if this channel is valid
 	if (ChannelSanity(pAd, Channel) == TRUE)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pAd->CommonCfg.Channel = Channel;
@@ -450,16 +439,12 @@ INT	Set_Channel_Proc(
 				}
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 		success = TRUE;
 	}
 	else
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			success = FALSE;
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -515,14 +500,11 @@ INT	Set_TxPower_Proc(
 	TxPower = (ULONG) simple_strtol(arg, 0, 10);
 	if (TxPower <= 100)
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pAd->CommonCfg.TxPowerDefault = TxPower;
 			pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
 		}
-#endif // CONFIG_STA_SUPPORT //
 		success = TRUE;
 	}
 	else
@@ -587,22 +569,18 @@ INT	Set_TxPreamble_Proc(
 	{
 		case Rt802_11PreambleShort:
 			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
+
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
-#endif // CONFIG_STA_SUPPORT //
 			break;
 		case Rt802_11PreambleLong:
-#ifdef CONFIG_STA_SUPPORT
 		case Rt802_11PreambleAuto:
 			// if user wants AUTO, initialize to LONG here, then change according to AP's
 			// capability upon association.
-#endif // CONFIG_STA_SUPPORT //
 			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
+
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
-#endif // CONFIG_STA_SUPPORT //
 			break;
 		default: //Invalid argument
 			return FALSE;
@@ -631,10 +609,8 @@ INT	Set_RTSThreshold_Proc(
 
 	if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD))
 		pAd->CommonCfg.RtsThreshold  = (USHORT)RtsThresh;
-#ifdef CONFIG_STA_SUPPORT
 	else if (RtsThresh == 0)
 		pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
-#endif // CONFIG_STA_SUPPORT //
 	else
 		return FALSE; //Invalid argument
 
@@ -675,7 +651,6 @@ INT	Set_FragThreshold_Proc(
 		pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD)
@@ -683,7 +658,6 @@ INT	Set_FragThreshold_Proc(
 		else
 			pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold));
 
@@ -904,7 +878,6 @@ BOOLEAN RTMPCheckStrPrintAble(
 
 	========================================================================
 */
-#ifdef CONFIG_STA_SUPPORT
 VOID    RTMPSetDesiredRates(
     IN  PRTMP_ADAPTER   pAdapter,
     IN  LONG            Rates)
@@ -1117,10 +1090,7 @@ NDIS_STATUS RTMPWPARemoveKeyProc(
 
 	return (Status);
 }
-#endif // CONFIG_STA_SUPPORT //
 
-
-#ifdef CONFIG_STA_SUPPORT
 /*
 	========================================================================
 
@@ -1170,7 +1140,6 @@ VOID	RTMPWPARemoveAllKeys(
 	}
 
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 	========================================================================
@@ -1214,10 +1183,8 @@ VOID	RTMPSetPhyMode(
 
 	if (i == pAd->ChannelListNum)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			pAd->CommonCfg.Channel = FirstChannel(pAd);
-#endif // CONFIG_STA_SUPPORT //
 		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
 	}
 
@@ -1528,14 +1495,10 @@ VOID	RTMPSetHT(
 	}
 	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		RTMPSetIndividualHT(pAd, 0);
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 /*
@@ -1560,8 +1523,6 @@ VOID	RTMPSetIndividualHT(
 
 	do
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
@@ -1569,7 +1530,6 @@ VOID	RTMPSetIndividualHT(
 			//pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
 				break;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	} while (FALSE);
 
 	if (pDesired_ht_phy == NULL)
@@ -1721,7 +1681,6 @@ VOID	RTMPAddWcidAttributeEntry(
 	USHORT		Wcid = 0;
 
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (BssIdx > BSS0)
@@ -1742,13 +1701,11 @@ VOID	RTMPAddWcidAttributeEntry(
 			else
 				Wcid = MCAST_WCID;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// Update WCID attribute table
 	offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pEntry && pEntry->ValidAsMesh)
@@ -1756,7 +1713,6 @@ VOID	RTMPAddWcidAttributeEntry(
 		else
 			WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
 
@@ -1887,11 +1843,10 @@ VOID RTMPIoctlGetSiteSurvey(
 	    "Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT");
 
 	WaitCnt = 0;
-#ifdef CONFIG_STA_SUPPORT
 	pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
+
 	while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200))
 		OS_WAIT(500);
-#endif // CONFIG_STA_SUPPORT //
 
 	for(i=0; i<pAdapter->ScanTab.BssNr ;i++)
 	{
@@ -1957,9 +1912,7 @@ VOID RTMPIoctlGetSiteSurvey(
         sprintf(msg+strlen(msg),"\n");
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-#endif // CONFIG_STA_SUPPORT //
 	wrq->u.data.length = strlen(msg);
 	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
 
@@ -2257,9 +2210,7 @@ INT	Set_HtMcs_Proc(
 	IN	PUCHAR			arg)
 {
 	ULONG HtMcs, Mcs_tmp;
-#ifdef CONFIG_STA_SUPPORT
     BOOLEAN bAutoRate = FALSE;
-#endif // CONFIG_STA_SUPPORT //
 
 	Mcs_tmp = simple_strtol(arg, 0, 10);
 
@@ -2268,7 +2219,6 @@ INT	Set_HtMcs_Proc(
 	else
 		HtMcs = MCS_AUTO;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs;
@@ -2304,7 +2254,6 @@ INT	Set_HtMcs_Proc(
         if (ADHOC_ON(pAd))
             return TRUE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	SetCommonHT(pAd);
 
@@ -2778,10 +2727,8 @@ INT	Set_FixedTxMode_Proc(
         fix_tx_mode = FIXED_TXMODE_CCK;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode));
 
@@ -2866,11 +2813,8 @@ INT	Show_SSID_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
-#endif // CONFIG_STA_SUPPORT //
 	return 0;
 }
 
@@ -3031,11 +2975,8 @@ INT	Show_HtMcs_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-#endif // CONFIG_STA_SUPPORT //
 	return 0;
 }
 
@@ -3177,11 +3118,8 @@ INT	Show_WmmCapable_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
-#endif // CONFIG_STA_SUPPORT //
 
 	return 0;
 }
@@ -3195,7 +3133,6 @@ INT	Show_IEEE80211H_Proc(
 	return 0;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 INT	Show_NetworkType_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
@@ -3220,7 +3157,6 @@ INT	Show_NetworkType_Proc(
 	}
 	return 0;
 }
-#endif // CONFIG_STA_SUPPORT //
 
 INT	Show_AuthMode_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -3228,10 +3164,8 @@ INT	Show_AuthMode_Proc(
 {
 	NDIS_802_11_AUTHENTICATION_MODE	AuthMode = Ndis802_11AuthModeOpen;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		AuthMode = pAd->StaCfg.AuthMode;
-#endif // CONFIG_STA_SUPPORT //
 
 	if ((AuthMode >= Ndis802_11AuthModeOpen) &&
 		(AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
@@ -3248,10 +3182,8 @@ INT	Show_EncrypType_Proc(
 {
 	NDIS_802_11_WEP_STATUS	WepStatus = Ndis802_11WEPDisabled;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		WepStatus = pAd->StaCfg.WepStatus;
-#endif // CONFIG_STA_SUPPORT //
 
 	if ((WepStatus >= Ndis802_11WEPEnabled) &&
 		(WepStatus <= Ndis802_11Encryption4KeyAbsent))
@@ -3268,10 +3200,8 @@ INT	Show_DefaultKeyID_Proc(
 {
 	UCHAR DefaultKeyId = 0;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		DefaultKeyId = pAd->StaCfg.DefaultKeyId;
-#endif // CONFIG_STA_SUPPORT //
 
 	sprintf(pBuf, "\t%d", DefaultKeyId);
 
@@ -3341,11 +3271,8 @@ INT	Show_WPAPSK_Proc(
 	INT 	idx;
 	UCHAR	PMK[32] = {0};
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
-#endif // CONFIG_STA_SUPPORT //
 
     sprintf(pBuf, "\tPMK = ");
     for (idx = 0; idx < 32; idx++)

drivers/staging/rt2860/common/cmm_sanity.c

@@ -275,9 +275,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     OUT PQOS_CAPABILITY_PARM pQosCapability,
     OUT ULONG *pRalinkIe,
     OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
     OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
     OUT HT_CAPABILITY_IE *pHtCapability,
 	OUT UCHAR		 *AddHtInfoLen,
 	OUT ADD_HT_INFO_IE *AddHtInfo,
@@ -286,9 +284,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     OUT	PNDIS_802_11_VARIABLE_IEs pVIE)
 {
     CHAR				*Ptr;
-#ifdef CONFIG_STA_SUPPORT
 	CHAR 				TimLen;
-#endif // CONFIG_STA_SUPPORT //
     PFRAME_802_11		pFrame;
     PEID_STRUCT         pEid;
     UCHAR				SubType;
@@ -316,10 +312,8 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     *pAironetCellPowerLimit = 0xFF;  // Default of AironetCellPowerLimit is 0xFF
     *LengthVIE = 0;					// Set the length of VIE to init value 0
     *pHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 		*pPreNHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#endif // CONFIG_STA_SUPPORT //
     *AddHtInfoLen = 0;					// Set the length of VIE to init value 0
     *pRalinkIe = 0;
     *pNewChannel = 0;
@@ -428,7 +422,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 				*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
 				*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
 
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					*pPreNHtCapabilityLen = 0;	// Nnow we only support 26 bytes.
@@ -437,7 +430,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 					NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
 					*LengthVIE += (pEid->Len + 2);
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 			else
 			{
@@ -458,14 +450,12 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 				*(USHORT *)(&AddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo2));
 				*(USHORT *)(&AddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo3));
 
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 			                Ptr = (PUCHAR) pVIE;
 			                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
 			                *LengthVIE += (pEid->Len + 2);
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 			else
 			{
@@ -492,7 +482,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                 if(pEid->Len == 1)
                 {
                     *pChannel = *pEid->Octet;
-#ifdef CONFIG_STA_SUPPORT
+
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						if (ChannelSanity(pAd, *pChannel) == 0)
@@ -501,7 +491,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 							return FALSE;
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
+
                     Sanity |= 0x4;
                 }
                 else
@@ -539,14 +529,13 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                 }
                 break;
 
-#ifdef CONFIG_STA_SUPPORT
             case IE_TIM:
                 if(INFRA_ON(pAd) && SubType == SUBTYPE_BEACON)
                 {
                     GetTimBit((PUCHAR)pEid, pAd->StaActive.Aid, &TimLen, pBcastFlag, pDtimCount, pDtimPeriod, pMessageToMe);
                 }
                 break;
-#endif // CONFIG_STA_SUPPORT //
+
             case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
                 if(pEid->Len == 3)
                 {
@@ -568,7 +557,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
         			else
         				*pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
                 }
-#ifdef CONFIG_STA_SUPPORT
 #ifdef DOT11_N_SUPPORT
 		// This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
 
@@ -589,7 +577,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                     }
                 }
 #endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
                 else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
                 {
                     // Copy to pVIE which will report to microsoft bssid list.
@@ -722,7 +709,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     }
 
     // For some 11a AP. it did not have the channel EID, patch here
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		UCHAR LatchRfChannel = MsgChannel;
@@ -735,7 +721,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 			Sanity |= 0x4;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (Sanity != 0x7)
 	{
@@ -776,10 +761,8 @@ BOOLEAN MlmeScanReqSanity(
 
 	if ((*pBssType == BSS_INFRA || *pBssType == BSS_ADHOC || *pBssType == BSS_ANY)
 		&& (*pScanType == SCAN_ACTIVE || *pScanType == SCAN_PASSIVE
-#ifdef CONFIG_STA_SUPPORT
 		|| *pScanType == SCAN_CISCO_PASSIVE || *pScanType == SCAN_CISCO_ACTIVE
 		|| *pScanType == SCAN_CISCO_CHANNEL_LOAD || *pScanType == SCAN_CISCO_NOISE
-#endif // CONFIG_STA_SUPPORT //
 		))
 	{
 		return TRUE;

drivers/staging/rt2860/common/cmm_sync.c

@@ -383,27 +383,21 @@ VOID ScanNextChannel(
 	NDIS_STATUS     NStatus;
 	ULONG           FrameLen = 0;
 	UCHAR           SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
-#ifdef CONFIG_STA_SUPPORT
 	USHORT          Status;
 	PHEADER_802_11  pHdr80211;
-#endif // CONFIG_STA_SUPPORT //
 	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (MONITOR_ON(pAd))
 			return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pAd->MlmeAux.Channel == 0)
 	{
 		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
-#ifdef CONFIG_STA_SUPPORT
 			&& (INFRA_ON(pAd)
 				|| (pAd->OpMode == OPMODE_AP))
-#endif // CONFIG_STA_SUPPORT //
 			)
 		{
 			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
@@ -421,7 +415,6 @@ VOID ScanNextChannel(
 			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			//
@@ -452,14 +445,11 @@ VOID ScanNextChannel(
 			Status = MLME_SUCCESS;
 			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
 		}
-#endif // CONFIG_STA_SUPPORT //
-
 
 		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
 	}
 	else
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 		// BBP and RF are not accessible in PS mode, we has to wake them up first
@@ -470,12 +460,10 @@ VOID ScanNextChannel(
 			if (pAd->StaCfg.Psm == PWR_SAVE)
 				MlmeSetPsmBit(pAd, PWR_ACTIVE);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
 		AsicLockChannel(pAd, pAd->MlmeAux.Channel);
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (pAd->MlmeAux.Channel > 14)
@@ -487,7 +475,6 @@ VOID ScanNextChannel(
 				}
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		//Global country domain(ch1-11:active scan, ch12-14 passive scan)
 		if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12) && ((pAd->CommonCfg.CountryRegion & 0x7f) == REGION_31_BG_BAND))
@@ -499,7 +486,6 @@ VOID ScanNextChannel(
 		// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
 		if (ScanType == FAST_SCAN_ACTIVE)
 			RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
-#ifdef CONFIG_STA_SUPPORT
 		else if (((ScanType == SCAN_CISCO_ACTIVE) ||
 				(ScanType == SCAN_CISCO_PASSIVE) ||
 				(ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
@@ -510,7 +496,6 @@ VOID ScanNextChannel(
 			else
 				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
 		}
-#endif // CONFIG_STA_SUPPORT //
 		else // must be SCAN_PASSIVE or SCAN_ACTIVE
 		{
 			if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
@@ -535,14 +520,13 @@ VOID ScanNextChannel(
 			if (NStatus != NDIS_STATUS_SUCCESS)
 			{
 				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
-#ifdef CONFIG_STA_SUPPORT
+
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
 					Status = MLME_FAIL_NO_RESOURCE;
 					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
 				}
-#endif // CONFIG_STA_SUPPORT //
 
 				return;
 			}
@@ -615,11 +599,8 @@ VOID ScanNextChannel(
 
 		// For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
-#endif // CONFIG_STA_SUPPORT //
-
 	}
 }
 

drivers/staging/rt2860/common/cmm_wpa.c

@@ -370,7 +370,6 @@ static VOID RTMPInsertRsnIeCipher(
                 break;
         }
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((pAd->OpMode == OPMODE_STA) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
@@ -386,7 +385,6 @@ static VOID RTMPInsertRsnIeCipher(
 					break;
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		// swap for big-endian platform
 		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
@@ -448,7 +446,6 @@ static VOID RTMPInsertRsnIeCipher(
                 break;
         }
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((pAd->OpMode == OPMODE_STA) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
@@ -464,7 +461,6 @@ static VOID RTMPInsertRsnIeCipher(
 					break;
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		// swap for big-endian platform
 		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
@@ -627,7 +623,6 @@ VOID RTMPMakeRSNIE(
 	rsnielen_ex_cur_p = NULL;
 
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 #ifdef WPA_SUPPLICANT_SUPPORT
@@ -660,7 +655,6 @@ VOID RTMPMakeRSNIE(
 
 			bMixCipher = pAd->StaCfg.bMixCipher;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// indicate primary RSNIE as WPA or WPA2
@@ -1131,11 +1125,6 @@ BOOLEAN RTMPParseEapolKeyData(
         return FALSE;
     }
 
-
-#ifdef CONFIG_STA_SUPPORT
-	// Todo
-#endif // CONFIG_STA_SUPPORT //
-
 	return TRUE;
 
 }

drivers/staging/rt2860/common/mlme.c

@@ -50,11 +50,9 @@ UCHAR	Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04};
 UCHAR   RALINK_OUI[]  = {0x00, 0x0c, 0x43};
 UCHAR   BROADCOM_OUI[]  = {0x00, 0x90, 0x4c};
 UCHAR   WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
-#ifdef CONFIG_STA_SUPPORT
 #ifdef DOT11_N_SUPPORT
 UCHAR	PRE_N_HT_OUI[]	= {0x00, 0x90, 0x4c};
 #endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 
 UCHAR RateSwitchTable[] = {
 // Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
@@ -485,7 +483,6 @@ NDIS_STATUS MlmeInit(
 		pAd->Mlme.bRunning = FALSE;
 		NdisAllocateSpinLock(&pAd->Mlme.TaskLock);
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			BssTableInit(&pAd->ScanTab);
@@ -502,9 +499,6 @@ NDIS_STATUS MlmeInit(
 			// state machine init
 			MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
 		}
-#endif // CONFIG_STA_SUPPORT //
-
-
 
 		ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine, pAd->Mlme.ActFunc);
 
@@ -517,8 +511,6 @@ NDIS_STATUS MlmeInit(
 		// software-based RX Antenna diversity
 		RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE);
 
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 	        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
@@ -528,8 +520,6 @@ NDIS_STATUS MlmeInit(
 	    		RTMPInitTimer(pAd, &pAd->Mlme.RadioOnOffTimer, GET_TIMER_FUNCTION(RadioOnExec), pAd, FALSE);
 	        }
 		}
-#endif // CONFIG_STA_SUPPORT //
-
 	} while (FALSE);
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- MLME Initialize\n"));
@@ -589,7 +579,6 @@ VOID MlmeHandler(
 			switch (Elem->Machine)
 			{
 				// STA state machines
-#ifdef	CONFIG_STA_SUPPORT
 				case ASSOC_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.AssocMachine, Elem);
 					break;
@@ -611,8 +600,6 @@ VOID MlmeHandler(
 				case AIRONET_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.AironetMachine, Elem);
 					break;
-#endif // CONFIG_STA_SUPPORT //
-
 				case ACTION_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.ActMachine, Elem);
 					break;
@@ -666,7 +653,6 @@ VOID MlmeHalt(
 		AsicDisableSync(pAd);
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Cancel pending timers
@@ -682,7 +668,6 @@ VOID MlmeHalt(
 		    RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer,		&Cancelled);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,		&Cancelled);
 	RTMPCancelTimer(&pAd->Mlme.RxAntEvalTimer,		&Cancelled);
@@ -777,7 +762,6 @@ VOID MlmePeriodicExec(
 		pAd->StaCfg.WpaSupplicantUP = 1;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 	    // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second.
@@ -818,7 +802,6 @@ VOID MlmePeriodicExec(
 			}
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Do nothing if the driver is starting halt state.
 	// This might happen when timer already been fired before cancel timer with mlmehalt
@@ -869,7 +852,6 @@ VOID MlmePeriodicExec(
 
 	RT28XX_MLME_PRE_SANITY_CHECK(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Do nothing if monitor mode is on
@@ -895,7 +877,6 @@ VOID MlmePeriodicExec(
 				}
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pAd->bUpdateBcnCntDone = FALSE;
 
@@ -905,7 +886,6 @@ VOID MlmePeriodicExec(
 	// execute every 500ms
 	if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		// perform dynamic tx rate switching based on past TX history
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
@@ -914,7 +894,6 @@ VOID MlmePeriodicExec(
 				&& (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)))
 				MlmeDynamicTxRateSwitching(pAd);
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// Normal 1 second Mlme PeriodicExec.
@@ -983,14 +962,11 @@ VOID MlmePeriodicExec(
 			}
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			STAMlmePeriodicExec(pAd);
-#endif // CONFIG_STA_SUPPORT //
 
 		MlmeResetRalinkCounters(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE))
@@ -1015,7 +991,6 @@ VOID MlmePeriodicExec(
 				}
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		RT28XX_MLME_HANDLER(pAd);
 	}
@@ -1024,7 +999,6 @@ VOID MlmePeriodicExec(
 	pAd->bUpdateBcnCntDone = FALSE;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 VOID STAMlmePeriodicExec(
 	PRTMP_ADAPTER pAd)
 {
@@ -1365,7 +1339,6 @@ VOID MlmeAutoReconnectLastSSID(
 		RT28XX_MLME_HANDLER(pAd);
 	}
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 	==========================================================================
@@ -1414,7 +1387,6 @@ VOID MlmeSelectTxRateTable(
 			break;
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
 		{
 #ifdef DOT11_N_SUPPORT
@@ -1483,7 +1455,6 @@ VOID MlmeSelectTxRateTable(
 			}
 			break;
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 #ifdef DOT11_N_SUPPORT
 		if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
@@ -1587,7 +1558,6 @@ VOID MlmeSelectTxRateTable(
 #ifdef DOT11_N_SUPPORT
 #endif // DOT11_N_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 #ifdef DOT11_N_SUPPORT
@@ -1655,11 +1625,9 @@ VOID MlmeSelectTxRateTable(
 			DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
 				pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1]));
 		}
-#endif // CONFIG_STA_SUPPORT //
 	} while(FALSE);
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -2755,8 +2723,6 @@ VOID MlmeSetPsmBit(
 	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
 	DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetPsmBit = %d\n", psm));
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 // IRQL = DISPATCH_LEVEL
 VOID MlmeSetTxPreamble(
@@ -2895,8 +2861,6 @@ VOID MlmeUpdateTxRates(
 
 //===========================================================================
 //===========================================================================
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pHtPhy 		= &pAd->StaCfg.HTPhyMode;
@@ -2913,7 +2877,6 @@ VOID MlmeUpdateTxRates(
 			MaxDesire = RATE_11;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pAd->CommonCfg.MaxDesiredRate = MaxDesire;
 	pMinHtPhy->word = 0;
@@ -2942,7 +2905,6 @@ VOID MlmeUpdateTxRates(
 	}
 #endif
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
 	{
 		pSupRate = &pAd->StaActive.SupRate[0];
@@ -2951,7 +2913,6 @@ VOID MlmeUpdateTxRates(
 		ExtRateLen = pAd->StaActive.ExtRateLen;
 	}
 	else
-#endif // CONFIG_STA_SUPPORT //
 	{
 		pSupRate = &pAd->CommonCfg.SupRate[0];
 		pExtRate = &pAd->CommonCfg.ExtRate[0];
@@ -3028,10 +2989,10 @@ VOID MlmeUpdateTxRates(
 	if (*auto_rate_cur_p)
 	{
 		short dbm = 0;
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
-#endif // CONFIG_STA_SUPPORT //
+
 		if (bLinkUp == TRUE)
 			pAd->CommonCfg.TxRate = RATE_24;
 		else
@@ -3190,7 +3151,6 @@ VOID MlmeUpdateHtTxRates(
 
 	auto_rate_cur_p = NULL;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pDesireHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
@@ -3201,9 +3161,7 @@ VOID MlmeUpdateHtTxRates(
 
 		auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
 	{
 		if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
@@ -3219,7 +3177,6 @@ VOID MlmeUpdateHtTxRates(
 			pMaxHtPhy->field.STBC = STBC_NONE;
 	}
 	else
-#endif // CONFIG_STA_SUPPORT //
 	{
 		if (pDesireHtPhy->bHtEnable == FALSE)
 			return;
@@ -3270,7 +3227,6 @@ VOID MlmeUpdateHtTxRates(
 	pMinHtPhy->field.STBC = 0;
 	pMinHtPhy->field.ShortGI = 0;
 	//If STA assigns fixed rate. update to fixed here.
-#ifdef CONFIG_STA_SUPPORT
 	if ( (pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff))
 	{
 		if (pDesireHtPhy->MCSSet[4] != 0)
@@ -3294,8 +3250,6 @@ VOID MlmeUpdateHtTxRates(
 				break;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 
 	// Decide ht rate
 	pHtPhy->field.STBC = pMaxHtPhy->field.STBC;
@@ -3677,7 +3631,6 @@ VOID BssEntrySet(
 	else
 		pBss->QbssLoad.bValid = FALSE;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		PEID_STRUCT     pEid;
@@ -3722,7 +3675,6 @@ VOID BssEntrySet(
 			pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 }
 
 /*!
@@ -3824,7 +3776,6 @@ ULONG BssTableSetEntry(
 	return Idx;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 // IRQL = DISPATCH_LEVEL
 VOID BssTableSsidSort(
 	IN	PRTMP_ADAPTER	pAd,
@@ -4079,8 +4030,6 @@ VOID BssTableSortByRssi(
 		}
 	}
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 VOID BssCipherParse(
 	IN OUT	PBSS_ENTRY	pBss)
@@ -4484,10 +4433,10 @@ VOID MgtMacHeaderInit(
 	pHdr80211->FC.SubType = SubType;
 	pHdr80211->FC.ToDs = ToDs;
 	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
+
 	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
 }
 
@@ -4694,7 +4643,6 @@ BOOLEAN MlmeEnqueueForRecv(
 		return FALSE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType))
@@ -4703,7 +4651,6 @@ BOOLEAN MlmeEnqueueForRecv(
 			return FALSE;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// OK, we got all the informations, it is time to put things into queue
 	NdisAcquireSpinLock(&(Queue->Lock));
@@ -4772,9 +4719,7 @@ VOID	MlmeRestartStateMachine(
 	IN	PRTMP_ADAPTER	pAd)
 {
 	MLME_QUEUE_ELEM		*Elem = NULL;
-#ifdef CONFIG_STA_SUPPORT
 	BOOLEAN				Cancelled;
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
 
@@ -4806,7 +4751,6 @@ VOID	MlmeRestartStateMachine(
 		}
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Cancel all timer events
@@ -4818,7 +4762,6 @@ VOID	MlmeRestartStateMachine(
 		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,	   &Cancelled);
 		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,	   &Cancelled);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Change back to original channel in case of doing scan
 	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
@@ -4827,7 +4770,6 @@ VOID	MlmeRestartStateMachine(
 	// Resume MSDU which is turned off durning scan
 	RTMPResumeMsduTransmission(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Set all state machines back IDLE
@@ -4838,7 +4780,6 @@ VOID	MlmeRestartStateMachine(
 		pAd->Mlme.SyncMachine.CurrState    = SYNC_IDLE;
 		pAd->Mlme.ActMachine.CurrState    = ACT_IDLE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Remove running state
 	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
@@ -4921,7 +4862,6 @@ VOID MlmeQueueDestroy(
  IRQL = DISPATCH_LEVEL
 
  */
-#ifdef CONFIG_STA_SUPPORT
 BOOLEAN MsgTypeSubst(
 	IN PRTMP_ADAPTER  pAd,
 	IN PFRAME_802_11 pFrame,
@@ -5031,7 +4971,6 @@ BOOLEAN MsgTypeSubst(
 
 	return TRUE;
 }
-#endif // CONFIG_STA_SUPPORT //
 
 // ===========================================================================================
 // state_machine.c
@@ -6148,7 +6087,6 @@ VOID AsicAdjustTxPower(
 
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -6199,7 +6137,7 @@ VOID AsicForceWakeup(
     DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n"));
     RT28XX_STA_FORCE_WAKEUP(pAd, Level);
 }
-#endif // CONFIG_STA_SUPPORT //
+
 /*
 	==========================================================================
 	Description:
@@ -6371,7 +6309,7 @@ VOID AsicEnableBssSync(
 	DBGPRINT(RT_DEBUG_TRACE, ("--->AsicEnableBssSync(INFRA mode)\n"));
 
 	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
@@ -6380,7 +6318,7 @@ VOID AsicEnableBssSync(
 		csr.field.bBeaconGen  = 0; // do NOT generate BEACON
 		csr.field.bTBTTEnable = 1;
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
 }
 
@@ -6575,7 +6513,7 @@ VOID AsicSetEdcaParm(
 		Ac2Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VI];
 		Ac2Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VI];
 		Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			// Tuning for Wi-Fi WMM S06
@@ -6592,7 +6530,6 @@ VOID AsicSetEdcaParm(
 				Ac2Cfg.field.AcTxop = 5;
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
 		Ac3Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VO];
@@ -6634,10 +6571,10 @@ VOID AsicSetEdcaParm(
 		CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE];
 		CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK];
 		CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
+
 		RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
 
 		CwmaxCsr.word = 0;
@@ -6651,7 +6588,7 @@ VOID AsicSetEdcaParm(
 		AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BE];
 		AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK];
 		AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			// Tuning for Wi-Fi WMM S06
@@ -6668,12 +6605,10 @@ VOID AsicSetEdcaParm(
 				AifsnCsr.field.Aifsn2 = 7;
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
+
 		RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
 
 		NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
@@ -6724,10 +6659,8 @@ VOID 	AsicSetSlotTime(
 	ULONG	SlotTime;
 	UINT32	RegValue = 0;
 
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->CommonCfg.Channel > 14)
 		bUseShortSlotTime = TRUE;
-#endif // CONFIG_STA_SUPPORT //
 
 	if (bUseShortSlotTime)
 		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
@@ -6736,7 +6669,6 @@ VOID 	AsicSetSlotTime(
 
 	SlotTime = (bUseShortSlotTime)? 9 : 20;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// force using short SLOT time for FAE to demo performance when TxBurst is ON
@@ -6752,20 +6684,17 @@ VOID 	AsicSetSlotTime(
 		else if (pAd->CommonCfg.bEnableTxBurst)
 			SlotTime = 9;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	//
 	// For some reasons, always set it to short slot time.
 	//
 	// ToDo: Should consider capability with 11B
 	//
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->StaCfg.BssType == BSS_ADHOC)
 			SlotTime = 20;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_IO_READ32(pAd, BKOFF_SLOT_CFG, &RegValue);
 	RegValue = RegValue & 0xFFFFFF00;
@@ -7387,7 +7316,6 @@ VOID	RTMPCheckRates(
 	NdisMoveMemory(SupRate, NewRate, NewRateLen);
 }
 
-#ifdef CONFIG_STA_SUPPORT
 #ifdef DOT11_N_SUPPORT
 BOOLEAN RTMPCheckChannel(
 	IN PRTMP_ADAPTER pAd,
@@ -7535,7 +7463,6 @@ BOOLEAN 	RTMPCheckHt(
 	return TRUE;
 }
 #endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 	========================================================================
@@ -7719,7 +7646,6 @@ VOID AsicEvaluateRxAnt(
 {
 	UCHAR	BBPR3 = 0;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
@@ -7732,7 +7658,6 @@ VOID AsicEvaluateRxAnt(
 		if (pAd->StaCfg.Psm == PWR_SAVE)
 			return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
 	BBPR3 &= (~0x18);
@@ -7749,10 +7674,10 @@ VOID AsicEvaluateRxAnt(
 		BBPR3 |= (0x0);
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
     	pAd->StaCfg.BBPR3 = BBPR3;
-#endif // CONFIG_STA_SUPPORT //
+
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
 		)
 	{
@@ -7793,12 +7718,9 @@ VOID AsicRxAntEvalTimeout(
 	IN PVOID SystemSpecific3)
 {
 	RTMP_ADAPTER	*pAd = (RTMP_ADAPTER *)FunctionContext;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR			BBPR3 = 0;
 	CHAR			larger = -127, rssi0, rssi1, rssi2;
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)	||
@@ -7859,9 +7781,6 @@ VOID AsicRxAntEvalTimeout(
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 		pAd->StaCfg.BBPR3 = BBPR3;
 	}
-
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 
@@ -7928,8 +7847,6 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 {
 	BOOLEAN		result = TRUE;
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// only associated STA counts
@@ -7940,9 +7857,6 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 		else
 			result = FALSE;
 	}
-#endif // CONFIG_STA_SUPPORT //
-
-
 
 	return result;
 }
@@ -7951,14 +7865,12 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 BOOLEAN RTMPAutoRateSwitchCheck(
 	IN PRTMP_ADAPTER    pAd)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->StaCfg.bAutoTxRateSwitch)
 			return TRUE;
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	return FALSE;
 }
 
@@ -7984,13 +7896,10 @@ UCHAR RTMPStaFixedTxMode(
 {
 	UCHAR	tx_mode = FIXED_TXMODE_HT;
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	return tx_mode;
 }
@@ -8047,7 +7956,6 @@ VOID RTMPUpdateLegacyTxSetting(
 	}
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -8254,7 +8162,6 @@ VOID AsicResetPBF(
 		DBGPRINT(RT_DEBUG_TRACE, ("<---  Asic HardReset PBF !!!! \n"));
 	}
 }
-#endif // CONFIG_STA_SUPPORT //
 
 VOID RTMPSetAGCInitValue(
 	IN PRTMP_ADAPTER	pAd,

drivers/staging/rt2860/common/rtmp_init.c

@@ -163,19 +163,14 @@ RTMP_REG_PAIR	MACRegTable[] =	{
 	{PWR_PIN_CFG,			0x00000003},	// patch for 2880-E
 };
 
-
-#ifdef CONFIG_STA_SUPPORT
 RTMP_REG_PAIR	STAMACRegTable[] =	{
 	{WMM_AIFSN_CFG,		0x00002273},
 	{WMM_CWMIN_CFG,	0x00002344},
 	{WMM_CWMAX_CFG,	0x000034aa},
 };
-#endif // CONFIG_STA_SUPPORT //
 
 #define	NUM_MAC_REG_PARMS		(sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR))
-#ifdef CONFIG_STA_SUPPORT
 #define	NUM_STA_MAC_REG_PARMS	(sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR))
-#endif // CONFIG_STA_SUPPORT //
 
 
 // New 8k byte firmware size for RT3071/RT3072
@@ -1277,9 +1272,6 @@ VOID	NICReadEEPROMParameters(
 
 	NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		NicConfig2.word = 0;
@@ -1293,7 +1285,6 @@ VOID	NICReadEEPROMParameters(
 			NicConfig2.word &= 0x00ff;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (NicConfig2.field.DynamicTxAgcControl == 1)
 		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
@@ -1504,10 +1495,8 @@ VOID	NICReadEEPROMParameters(
 VOID	NICInitAsicFromEEPROM(
 	IN	PRTMP_ADAPTER	pAd)
 {
-#ifdef CONFIG_STA_SUPPORT
 	UINT32					data = 0;
 	UCHAR	BBPR1 = 0;
-#endif // CONFIG_STA_SUPPORT //
 	USHORT					i;
 	EEPROM_ANTENNA_STRUC	Antenna;
 	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
@@ -1553,7 +1542,6 @@ VOID	NICInitAsicFromEEPROM(
     pAd->LedIndicatorStregth = 0xFF;
     RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, before link up
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Read Hardware controlled Radio state enable bit
@@ -1586,7 +1574,6 @@ VOID	NICInitAsicFromEEPROM(
 			AsicCheckCommanOk(pAd, PowerWakeCID);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Turn off patching for cardbus controller
 	if (NicConfig2.field.CardbusAcceleration == 1)
@@ -1619,7 +1606,6 @@ VOID	NICInitAsicFromEEPROM(
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Handle the difference when 1T
@@ -1632,7 +1618,7 @@ VOID	NICInitAsicFromEEPROM(
 
 		DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio));
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word));
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n"));
 }
@@ -1880,7 +1866,6 @@ NDIS_STATUS	NICInitializeAsic(
 	}
 
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
@@ -1888,8 +1873,6 @@ NDIS_STATUS	NICInitializeAsic(
 			RTMP_IO_WRITE32(pAd, STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 
 	//
 	// Before program BBP, we need to wait BBP/RF get wake up.
@@ -1953,7 +1936,6 @@ NDIS_STATUS	NICInitializeAsic(
 
 
 	// Add radio off control
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->StaCfg.bRadio == FALSE)
@@ -1963,7 +1945,6 @@ NDIS_STATUS	NICInitializeAsic(
 			DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n"));
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Clear raw counters
 	RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
@@ -2002,14 +1983,12 @@ NDIS_STATUS	NICInitializeAsic(
 		}
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
 		if ((pAd->MACVersion&0xffff) != 0x0101)
 			RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n"));
 	return NDIS_STATUS_SUCCESS;
@@ -3006,7 +2985,6 @@ VOID	UserCfgInit(
 	//
 	// part II. intialize STA specific configuration
 	//
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
@@ -3045,7 +3023,6 @@ VOID	UserCfgInit(
 		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// global variables mXXXX used in MAC protocol state machines
 	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
@@ -3056,7 +3033,6 @@ VOID	UserCfgInit(
 	pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;		// default PHY mode
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);  // CCK use LONG preamble
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// user desired power mode
@@ -3101,7 +3077,6 @@ VOID	UserCfgInit(
 #endif // WPA_SUPPLICANT_SUPPORT //
 
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Default for extra information is not valid
 	pAd->ExtraInfo = EXTRA_INFO_CLEAR;

drivers/staging/rt2860/common/rtmp_wep.c

@@ -144,14 +144,12 @@ VOID	RTMPInitWepEngine(
 
 	pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;   //Init crc32.
 
-#ifdef CONFIG_STA_SUPPORT
     if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10) && (pAd->OpMode == OPMODE_STA))
     {
         ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, pKey, KeyLen);  //INIT SBOX, KEYLEN+3(IV)
         NdisMoveMemory(pDest, pKey, 3);  //Append Init Vector
     }
     else
-#endif // CONFIG_STA_SUPPORT //
     {
 		NdisMoveMemory(WEPKEY + 3, pKey, KeyLen);
 

drivers/staging/rt2860/common/spectrum.c

@@ -1454,10 +1454,8 @@ static VOID PeerChSwAnnAction(
 {
 	CH_SW_ANN_INFO ChSwAnnInfo;
 	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR index = 0, Channel = 0, NewChannel = 0;
 	ULONG Bssidx = 0;
-#endif // CONFIG_STA_SUPPORT //
 
 	NdisZeroMemory(&ChSwAnnInfo, sizeof(CH_SW_ANN_INFO));
 	if (! PeerChSwAnnSanity(pAd, Elem->Msg, Elem->MsgLen, &ChSwAnnInfo))
@@ -1466,8 +1464,6 @@ static VOID PeerChSwAnnAction(
 		return;
 	}
 
-
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 	{
 		Bssidx = BssTableSearch(&pAd->ScanTab, pFr->Hdr.Addr3, pAd->CommonCfg.Channel);
@@ -1514,7 +1510,6 @@ static VOID PeerChSwAnnAction(
 			}
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	return;
 }

drivers/staging/rt2860/mlme.h

@@ -74,12 +74,9 @@
 #define	FAST_ACTIVE_SCAN_TIME	    30 		  // Active scan waiting for probe response time
 #define CW_MIN_IN_BITS              4         // actual CwMin = 2^CW_MIN_IN_BITS - 1
 
-
-#ifdef CONFIG_STA_SUPPORT
 #ifndef CONFIG_AP_SUPPORT
 #define CW_MAX_IN_BITS              10        // actual CwMax = 2^CW_MAX_IN_BITS - 1
 #endif
-#endif // CONFIG_STA_SUPPORT //
 
 // Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
 // SHould not refer to this constant anymore
@@ -111,10 +108,7 @@
 
 #define BSS_NOT_FOUND                    0xFFFFFFFF
 
-
-#ifdef CONFIG_STA_SUPPORT
 #define MAX_LEN_OF_MLME_QUEUE            40 //10
-#endif // CONFIG_STA_SUPPORT //
 
 #define SCAN_PASSIVE                     18		// scan with no probe request, only wait beacon and probe response
 #define SCAN_ACTIVE                      19		// scan with probe request, and wait beacon and probe response
@@ -842,13 +836,10 @@ typedef struct {
     UCHAR       EdcaUpdateCount;
 } QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM;
 
-#ifdef CONFIG_STA_SUPPORT
 typedef struct {
     UCHAR       IELen;
     UCHAR       IE[MAX_CUSTOM_LEN];
 } WPA_IE_;
-#endif // CONFIG_STA_SUPPORT //
-
 
 typedef struct {
     UCHAR   Bssid[MAC_ADDR_LEN];
@@ -908,10 +899,8 @@ typedef struct {
 	EDCA_PARM           EdcaParm;
 	QOS_CAPABILITY_PARM QosCapability;
 	QBSS_LOAD_PARM      QbssLoad;
-#ifdef CONFIG_STA_SUPPORT
     WPA_IE_     WpaIE;
     WPA_IE_     RsnIE;
-#endif // CONFIG_STA_SUPPORT //
 } BSS_ENTRY, *PBSS_ENTRY;
 
 typedef struct {

drivers/staging/rt2860/oid.h

@@ -383,9 +383,6 @@ typedef struct PACKED _RADIUS_CONF
 	RADIUS_KEY_INFO	RadiusInfo[8/*MAX_MBSSID_NUM*/];
 } RADIUS_CONF, *PRADIUS_CONF;
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 // Key mapping keys require a BSSID
 typedef struct _NDIS_802_11_KEY
 {
@@ -396,7 +393,6 @@ typedef struct _NDIS_802_11_KEY
     NDIS_802_11_KEY_RSC KeyRSC;
     UCHAR           KeyMaterial[1];     // variable length depending on above field
 } NDIS_802_11_KEY, *PNDIS_802_11_KEY;
-#endif // CONFIG_STA_SUPPORT //
 
 typedef struct _NDIS_802_11_REMOVE_KEY
 {
@@ -600,7 +596,6 @@ typedef enum _NDIS_802_11_MEDIA_STREAM_MODE
 // PMKID Structures
 typedef UCHAR   NDIS_802_11_PMKID_VALUE[16];
 
-#ifdef CONFIG_STA_SUPPORT
 typedef struct _BSSID_INFO
 {
     NDIS_802_11_MAC_ADDRESS BSSID;
@@ -613,8 +608,6 @@ typedef struct _NDIS_802_11_PMKID
     UINT    BSSIDInfoCount;
     BSSID_INFO BSSIDInfo[1];
 } NDIS_802_11_PMKID, *PNDIS_802_11_PMKID;
-#endif // CONFIG_STA_SUPPORT //
-
 
 typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION
 {
@@ -638,7 +631,6 @@ typedef struct _NDIS_802_11_CAPABILITY
 #define SIOCIWFIRSTPRIV								SIOCDEVPRIVATE
 #endif
 
-#ifdef CONFIG_STA_SUPPORT
 #define RTPRIV_IOCTL_SET							(SIOCIWFIRSTPRIV + 0x02)
 
 #ifdef DBG
@@ -665,8 +657,6 @@ enum {
 	SHOW_CFG_VALUE = 20,
 };
 
-#endif // CONFIG_STA_SUPPORT //
-
 #define OID_802_11_BUILD_CHANNEL_EX				0x0714
 #define OID_802_11_GET_CH_LIST					0x0715
 #define OID_802_11_GET_COUNTRY_CODE				0x0716
@@ -883,7 +873,6 @@ typedef struct _RT_LLTD_ASSOICATION_TABLE {
 } RT_LLTD_ASSOICATION_TABLE, *PRT_LLTD_ASSOICATION_TABLE;
 #endif // LLTD_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 #ifdef WPA_SUPPLICANT_SUPPORT
 #ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
 #define	RT_ASSOC_EVENT_FLAG                         0x0101
@@ -896,18 +885,15 @@ typedef struct _RT_LLTD_ASSOICATION_TABLE {
 #define RT_INTERFACE_UP                             0x0108
 #endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 #endif // WPA_SUPPLICANT_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 
 #define MAX_CUSTOM_LEN 128
 
-#ifdef CONFIG_STA_SUPPORT
 typedef enum _RT_802_11_D_CLIENT_MODE
 {
    Rt802_11_D_None,
    Rt802_11_D_Flexible,
    Rt802_11_D_Strict,
 } RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
-#endif // CONFIG_STA_SUPPORT //
 
 typedef struct _RT_CHANNEL_LIST_INFO
 {

drivers/staging/rt2860/rt_config.h

@@ -64,15 +64,12 @@
 #include "igmp_snoop.h"
 #endif // IGMP_SNOOP_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 #ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
 #ifndef WPA_SUPPLICANT_SUPPORT
 #error "Build for being controlled by NetworkManager or wext, please set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y"
 #endif // WPA_SUPPLICANT_SUPPORT //
 #endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 
-#endif // CONFIG_STA_SUPPORT //
-
 #ifdef IKANOS_VX_1X0
 #include	"vr_ikans.h"
 #endif // IKANOS_VX_1X0 //

drivers/staging/rt2860/rt_linux.c

@@ -34,8 +34,6 @@ BUILD_TIMER_FUNCTION(AsicRxAntEvalTimeout);
 BUILD_TIMER_FUNCTION(APSDPeriodicExec);
 BUILD_TIMER_FUNCTION(AsicRfTuningExec);
 
-
-#ifdef CONFIG_STA_SUPPORT
 BUILD_TIMER_FUNCTION(BeaconTimeout);
 BUILD_TIMER_FUNCTION(ScanTimeout);
 BUILD_TIMER_FUNCTION(AuthTimeout);
@@ -47,7 +45,6 @@ BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
 BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
 BUILD_TIMER_FUNCTION(PsPollWakeExec);
 BUILD_TIMER_FUNCTION(RadioOnExec);
-#endif // CONFIG_STA_SUPPORT //
 
 // for wireless system event message
 char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = {
@@ -489,12 +486,10 @@ PNET_DEV get_netdev_from_bssid(
 {
     PNET_DEV dev_p = NULL;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		dev_p = pAd->net_dev;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	ASSERT(dev_p);
 	return dev_p; /* return one of MBSS */
@@ -650,10 +645,8 @@ void wlan_802_11_to_802_3_packet(
 	//
 	//
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -818,8 +811,6 @@ VOID RTMPSendWirelessEvent(
 #endif  /* WIRELESS_EXT >= 15 */
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 void send_monitor_packets(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	RX_BLK			*pRxBlk)
@@ -990,8 +981,6 @@ err_free_sk_buff:
 	return;
 
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify)
 {

drivers/staging/rt2860/rt_linux.h

@@ -87,12 +87,10 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
 
 // add by kathy
 
-#ifdef CONFIG_STA_SUPPORT
 #define STA_PROFILE_PATH			"/etc/Wireless/RT2860STA/RT2860STA.dat"
 #define STA_RTMP_FIRMWARE_FILE_NAME "/etc/Wireless/RT2860STA/RT2860STA.bin"
 #define STA_NIC_DEVICE_NAME			"RT2860STA"
 #define STA_DRIVER_VERSION			"1.8.1.1"
-#endif // CONFIG_STA_SUPPORT //
 
 #ifndef PCI_DEVICE
 #define PCI_DEVICE(vend,dev) \
@@ -138,17 +136,12 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
 #define MIN_NET_DEVICE_FOR_WDS			0x10		//0x40,0x50,0x60,0x70
 #define MIN_NET_DEVICE_FOR_APCLI		0x20
 #define MIN_NET_DEVICE_FOR_MESH			0x30
-#ifdef CONFIG_STA_SUPPORT
 #define MIN_NET_DEVICE_FOR_DLS			0x40
-#endif // CONFIG_STA_SUPPORT //
 
-
-#ifdef CONFIG_STA_SUPPORT
 #define NDIS_PACKET_TYPE_DIRECTED		0
 #define NDIS_PACKET_TYPE_MULTICAST		1
 #define NDIS_PACKET_TYPE_BROADCAST		2
 #define NDIS_PACKET_TYPE_ALL_MULTICAST	3
-#endif // CONFIG_STA_SUPPORT //
 
 typedef	struct pid *	THREAD_PID;
 #define	THREAD_PID_INIT_VALUE	NULL
@@ -541,8 +534,6 @@ DECLARE_TIMER_FUNCTION(AsicRxAntEvalTimeout);
 DECLARE_TIMER_FUNCTION(APSDPeriodicExec);
 DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
 
-
-#ifdef CONFIG_STA_SUPPORT
 DECLARE_TIMER_FUNCTION(BeaconTimeout);
 DECLARE_TIMER_FUNCTION(ScanTimeout);
 DECLARE_TIMER_FUNCTION(AuthTimeout);
@@ -554,7 +545,6 @@ DECLARE_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
 DECLARE_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
 DECLARE_TIMER_FUNCTION(PsPollWakeExec);
 DECLARE_TIMER_FUNCTION(RadioOnExec);
-#endif // CONFIG_STA_SUPPORT //
 
 void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
 

drivers/staging/rt2860/rt_main_dev.c

@@ -72,9 +72,7 @@ INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev)
 
 static void CfgInitHook(PRTMP_ADAPTER pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 extern	const struct iw_handler_def rt28xx_iw_handler_def;
-#endif // CONFIG_STA_SUPPORT //
 
 #if WIRELESS_EXT >= 12
 // This function will be called when query /proc
@@ -199,7 +197,6 @@ int rt28xx_close(IN PNET_DEV dev)
 	if (pAd == NULL)
 		return 0; // close ok
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// If dirver doesn't wake up firmware here,
@@ -259,7 +256,6 @@ int rt28xx_close(IN PNET_DEV dev)
 		MlmeRadioOff(pAd);
 		pAd->bPCIclkOff = FALSE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
 
@@ -278,13 +274,10 @@ int rt28xx_close(IN PNET_DEV dev)
 	// Close kernel threads or tasklets
 	kill_thread_task(pAd);
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		MacTableReset(pAd);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 
 	MeasureReqTabExit(pAd);
@@ -404,10 +397,8 @@ static int rt28xx_init(IN struct net_device *net_dev)
 
 	CfgInitHook(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		NdisAllocateSpinLock(&pAd->MacTabLock);
-#endif // CONFIG_STA_SUPPORT //
 
 	MeasureReqTabInit(pAd);
 	TpcReqTabInit(pAd);
@@ -585,13 +576,11 @@ int rt28xx_open(IN PNET_DEV dev)
 	if (rt28xx_init(net_dev) == FALSE)
 		goto err;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		NdisZeroMemory(pAd->StaCfg.dev_name, 16);
 		NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Set up the Mac address
 	NdisMoveMemory(net_dev->dev_addr, (void *) pAd->CurrentAddress, 6);
@@ -601,7 +590,6 @@ int rt28xx_open(IN PNET_DEV dev)
 
 	// Various AP function init
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 #ifdef WPA_SUPPLICANT_SUPPORT
@@ -617,7 +605,6 @@ int rt28xx_open(IN PNET_DEV dev)
 #endif // WPA_SUPPLICANT_SUPPORT //
 
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Enable Interrupt
 	RT28XX_IRQ_ENABLE(pAd);
@@ -632,10 +619,8 @@ int rt28xx_open(IN PNET_DEV dev)
 	printk("0x1300 = %08x\n", reg);
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
         RTMPInitPCIeLinkCtrlValue(pAd);
-#endif // CONFIG_STA_SUPPORT //
 
 	return (retval);
 
@@ -669,14 +654,12 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 
 	//ether_setup(dev);
 
-#ifdef CONFIG_STA_SUPPORT
 #if WIRELESS_EXT >= 12
 	if (pAd->OpMode == OPMODE_STA)
 	{
 		dev->wireless_handlers = &rt28xx_iw_handler_def;
 	}
 #endif //WIRELESS_EXT >= 12
-#endif // CONFIG_STA_SUPPORT //
 
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
@@ -740,9 +723,7 @@ INT __devinit   rt28xx_probe(
 	struct pci_dev *dev_p = (struct pci_dev *)_dev_p;
 
 
-#ifdef CONFIG_STA_SUPPORT
     DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
 
     net_dev = alloc_etherdev(sizeof(PRTMP_ADAPTER));
     if (net_dev == NULL)
@@ -774,17 +755,13 @@ INT __devinit   rt28xx_probe(
 
 	RT28XXNetDevInit(_dev_p, net_dev, pAd);
 
-#ifdef CONFIG_STA_SUPPORT
     pAd->StaCfg.OriDevType = net_dev->type;
-#endif // CONFIG_STA_SUPPORT //
 
 	// Post config
 	if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE)
 		goto err_out_unmap;
 
-#ifdef CONFIG_STA_SUPPORT
 	pAd->OpMode = OPMODE_STA;
-#endif // CONFIG_STA_SUPPORT //
 
 	// sample move
 	if (rt_ieee80211_if_setup(net_dev, pAd) != NDIS_STATUS_SUCCESS)
@@ -841,7 +818,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
 	int status = 0;
 	PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Drop send request since we are in monitor mode
@@ -851,7 +827,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
 			goto done;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
         // EapolStart size is 18
 	if (skb->len < 14)
@@ -869,17 +844,12 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
     }
 #endif
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 
 		STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
 	}
 
-#endif // CONFIG_STA_SUPPORT //
-
 	status = 0;
 done:
 
@@ -947,10 +917,8 @@ struct iw_statistics *rt28xx_get_wireless_stats(
 	if(pAd->iw_stats.qual.qual > 100)
 		pAd->iw_stats.qual.qual = 100;
 
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 		pAd->iw_stats.qual.level = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
-#endif // CONFIG_STA_SUPPORT //
 
 	pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; // noise level (dBm)
 
@@ -1002,13 +970,10 @@ INT rt28xx_ioctl(
 		return -ENETDOWN;
 	}
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	return ret;
 }

drivers/staging/rt2860/rt_profile.c

@@ -756,8 +756,6 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 	//DefaultKeyID
 	if(RTMPGetKeyParameter("DefaultKeyID", tmpbuf, 25, buffer))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			KeyIdx = simple_strtol(tmpbuf, 0, 10);
@@ -768,7 +766,6 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 
 			DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyID(0~3)=%d\n", pAd->StaCfg.DefaultKeyId));
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -783,7 +780,6 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 			    KeyType[i] = simple_strtol(macptr, 0, 10);
 		    }
 
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			{
 				sprintf(tok_str, "Key%dStr", idx + 1);
@@ -792,13 +788,10 @@ static void rtmp_read_key_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, c
 					rtmp_parse_key_buffer_from_file(pAd, tmpbuf, KeyType[BSS0], BSS0, idx);
 				}
 			}
-#endif // CONFIG_STA_SUPPORT //
 		}
 	}
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 static void rtmp_read_sta_wmm_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
 {
 	PUCHAR					macptr;
@@ -865,8 +858,6 @@ static void rtmp_read_sta_wmm_parms_from_file(IN  PRTMP_ADAPTER pAd, char *tmpbu
 	}
 
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 NDIS_STATUS	RTMPReadParametersHook(
 	IN	PRTMP_ADAPTER pAd)
@@ -879,10 +870,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 	CHAR					*tmpbuf;
 	ULONG					RtsThresh;
 	ULONG					FragThresh;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR	                keyMaterial[40];
-#endif // CONFIG_STA_SUPPORT //
-
 
 	PUCHAR					macptr;
 	INT						i = 0;
@@ -898,10 +886,8 @@ NDIS_STATUS	RTMPReadParametersHook(
         return NDIS_STATUS_FAILURE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		src = STA_PROFILE_PATH;
-#endif // CONFIG_STA_SUPPORT //
 
 	// Save uid and gid used for filesystem access.
 	// Set user and group to 0 (root)
@@ -975,8 +961,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 						pAd->CommonCfg.CountryCode[2] = ' ';
 					}
 
-
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//SSID
@@ -997,9 +981,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 							}
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//NetworkType
@@ -1015,7 +997,7 @@ NDIS_STATUS	RTMPReadParametersHook(
 							DBGPRINT(RT_DEBUG_TRACE, ("%s::(NetworkType=%d)\n", __func__, pAd->StaCfg.BssType));
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
+
 					//Channel
 					if(RTMPGetKeyParameter("Channel", tmpbuf, 10, buffer))
 					{
@@ -1055,10 +1037,10 @@ NDIS_STATUS	RTMPReadParametersHook(
 					if(RTMPGetKeyParameter("TxPower", tmpbuf, 10, buffer))
 					{
 						pAd->CommonCfg.TxPowerPercentage = (ULONG) simple_strtol(tmpbuf, 0, 10);
-#ifdef CONFIG_STA_SUPPORT
+
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 							pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
-#endif // CONFIG_STA_SUPPORT //
+
 						DBGPRINT(RT_DEBUG_TRACE, ("TxPower=%ld\n", pAd->CommonCfg.TxPowerPercentage));
 					}
 					//BGProtection
@@ -1175,11 +1157,8 @@ NDIS_STATUS	RTMPReadParametersHook(
 #endif // AGGREGATION_SUPPORT //
 
 					// WmmCapable
-
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
-#endif // CONFIG_STA_SUPPORT //
 
 					//ShortSlot
 					if(RTMPGetKeyParameter("ShortSlot", tmpbuf, 10, buffer))
@@ -1282,7 +1261,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 					//AuthMode
 					if(RTMPGetKeyParameter("AuthMode", tmpbuf, 128, buffer))
 					{
-#ifdef CONFIG_STA_SUPPORT
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							if ((strcmp(tmpbuf, "WEPAUTO") == 0) || (strcmp(tmpbuf, "wepauto") == 0))
@@ -1308,13 +1286,10 @@ NDIS_STATUS	RTMPReadParametersHook(
 
 							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					//EncrypType
 					if(RTMPGetKeyParameter("EncrypType", tmpbuf, 128, buffer))
 					{
-
-#ifdef CONFIG_STA_SUPPORT
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							if ((strcmp(tmpbuf, "WEP") == 0) || (strcmp(tmpbuf, "wep") == 0))
@@ -1334,12 +1309,8 @@ NDIS_STATUS	RTMPReadParametersHook(
 
 							DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						if(RTMPGetCriticalParameter("WPAPSK", tmpbuf, 512, buffer))
@@ -1389,7 +1360,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 							}
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
 
 					//DefaultKeyID, KeyType, KeyStr
 					rtmp_read_key_parms_from_file(pAd, tmpbuf, buffer);
@@ -1398,7 +1368,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 					HTParametersHook(pAd, tmpbuf, buffer);
 #endif // DOT11_N_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//PSMode
@@ -1485,8 +1454,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 								DBGPRINT(RT_DEBUG_TRACE, ("TGnWifiTest=%d\n", pAd->StaCfg.bTGnWifiTest));
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
-
 				}
 			}
 			else
@@ -1755,7 +1722,6 @@ static void	HTParametersHook(
 	{
 		UCHAR	fix_tx_mode;
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			fix_tx_mode = FIXED_TXMODE_HT;
@@ -1788,7 +1754,6 @@ static void	HTParametersHook(
 			DBGPRINT(RT_DEBUG_TRACE, ("Fixed Tx Mode = %d\n", fix_tx_mode));
 
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -1833,8 +1798,6 @@ static void	HTParametersHook(
 	// MSC
 	if (RTMPGetKeyParameter("HT_MCS", pValueStr, 50, pInput))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			Value = simple_strtol(pValueStr, 0, 10);
@@ -1852,7 +1815,6 @@ static void	HTParametersHook(
 				DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = AUTO\n"));
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// STBC

drivers/staging/rt2860/rtmp.h

@@ -43,14 +43,11 @@
 #include "link_list.h"
 #include "spectrum_def.h"
 
-
-#ifdef CONFIG_STA_SUPPORT
 #include "aironet.h"
-#endif // CONFIG_STA_SUPPORT //
 
 //#define DBG_DIAGNOSE		1
 
-#if defined(CONFIG_AP_SUPPORT) && defined(CONFIG_STA_SUPPORT)
+#if defined(CONFIG_AP_SUPPORT)
 #define IF_DEV_CONFIG_OPMODE_ON_AP(_pAd)	if(_pAd->OpMode == OPMODE_AP)
 #define IF_DEV_CONFIG_OPMODE_ON_STA(_pAd)	if(_pAd->OpMode == OPMODE_STA)
 #else
@@ -173,9 +170,7 @@ extern UCHAR  RateSwitchTable11N1S[];
 extern UCHAR  RateSwitchTable11N2S[];
 extern UCHAR  RateSwitchTable11N2SForABand[];
 
-#ifdef CONFIG_STA_SUPPORT
 extern UCHAR  PRE_N_HT_OUI[];
-#endif // CONFIG_STA_SUPPORT //
 #endif // DOT11_N_SUPPORT //
 
 #define	MAXSEQ		(0xFFF)
@@ -297,14 +292,12 @@ typedef struct  _QUEUE_HEADER   {
 #define RX_FILTER_CLEAR_FLAG(_pAd, _F)  ((_pAd)->CommonCfg.PacketFilter &= ~(_F))
 #define RX_FILTER_TEST_FLAG(_pAd, _F)   (((_pAd)->CommonCfg.PacketFilter & (_F)) != 0)
 
-#ifdef CONFIG_STA_SUPPORT
 #define STA_NO_SECURITY_ON(_p)          (_p->StaCfg.WepStatus == Ndis802_11EncryptionDisabled)
 #define STA_WEP_ON(_p)                  (_p->StaCfg.WepStatus == Ndis802_11Encryption1Enabled)
 #define STA_TKIP_ON(_p)                 (_p->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
 #define STA_AES_ON(_p)                  (_p->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
 
 #define STA_TGN_WIFI_ON(_p)             (_p->StaCfg.bTGnWifiTest == TRUE)
-#endif // CONFIG_STA_SUPPORT //
 
 #define CKIP_KP_ON(_p)				((((_p)->StaCfg.CkipFlag) & 0x10) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
 #define CKIP_CMIC_ON(_p)			((((_p)->StaCfg.CkipFlag) & 0x08) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
@@ -830,7 +823,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
 //
 #define JapanChannelCheck(channel)  ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64))
 
-#ifdef CONFIG_STA_SUPPORT
 #define STA_PORT_SECURED(_pAd) \
 { \
 	_pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
@@ -839,8 +831,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST {
 	_pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
 	NdisReleaseSpinLock(&(_pAd)->MacTabLock); \
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 //
 // Register set pair for initialzation register set definition
@@ -1127,9 +1117,7 @@ typedef struct _CIPHER_KEY {
 	UCHAR   RxTsc[6];           // 48bit TSC value
 	UCHAR   CipherAlg;          // 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128
 	UCHAR   KeyLen;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR   BssId[6];
-#endif // CONFIG_STA_SUPPORT //
             // Key length for each key, 0: entry is invalid
 	UCHAR   Type;               // Indicate Pairwise/Group when reporting MIC error
 } CIPHER_KEY, *PCIPHER_KEY;
@@ -1287,7 +1275,6 @@ typedef enum _ABGBAND_STATE_ {
 } ABGBAND_STATE;
 
 typedef struct _MLME_STRUCT {
-#ifdef CONFIG_STA_SUPPORT
 	// STA state machines
 	STATE_MACHINE           CntlMachine;
 	STATE_MACHINE           AssocMachine;
@@ -1303,7 +1290,6 @@ typedef struct _MLME_STRUCT {
 	STATE_MACHINE_FUNC      SyncFunc[SYNC_FUNC_SIZE];
 	STATE_MACHINE_FUNC      WpaPskFunc[WPA_PSK_FUNC_SIZE];
 	STATE_MACHINE_FUNC      AironetFunc[AIRONET_FUNC_SIZE];
-#endif // CONFIG_STA_SUPPORT //
 	STATE_MACHINE_FUNC      ActFunc[ACT_FUNC_SIZE];
 	// Action
 	STATE_MACHINE           ActMachine;
@@ -1466,13 +1452,11 @@ typedef	struct	_IOT_STRUC	{
 	UCHAR			RTSShortProt;
 	UCHAR			RTSLongProt;
 	BOOLEAN			bRTSLongProtOn;
-#ifdef CONFIG_STA_SUPPORT
 	BOOLEAN			bLastAtheros;
     BOOLEAN			bCurrentAtheros;
     BOOLEAN         bNowAtherosBurstOn;
 	BOOLEAN			bNextDisableRxBA;
     BOOLEAN			bToggle;
-#endif // CONFIG_STA_SUPPORT //
 } IOT_STRUC, *PIOT_STRUC;
 
 // This is the registry setting for 802.11n transmit setting.  Used in advanced page.
@@ -1727,9 +1711,7 @@ typedef struct _COMMON_CONFIG {
 	EDCA_PARM           APEdcaParm;         // EDCA parameters of the current associated AP
 	QBSS_LOAD_PARM      APQbssLoad;         // QBSS load of the current associated AP
 	UCHAR               AckPolicy[4];       // ACK policy of the specified AC. see ACK_xxx
-#ifdef CONFIG_STA_SUPPORT
 	BOOLEAN				bDLSCapable;		// 0:disable DLS, 1:enable DLS
-#endif // CONFIG_STA_SUPPORT //
 	// a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
 	// BOOLEAN control, either ON or OFF. These flags should always be accessed via
 	// OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros.
@@ -1795,8 +1777,6 @@ typedef struct _COMMON_CONFIG {
 #endif // MCAST_RATE_SPECIFIC //
 } COMMON_CONFIG, *PCOMMON_CONFIG;
 
-
-#ifdef CONFIG_STA_SUPPORT
 /* Modified by Wu Xi-Kun 4/21/2006 */
 // STA configuration and status
 typedef struct _STA_ADMIN_CONFIG {
@@ -2030,7 +2010,6 @@ typedef struct _STA_ACTIVE_CONFIG {
 	RT_HT_PHY_INFO		SupportedPhyInfo;
 	RT_HT_CAPABILITY	SupportedHtPhy;
 } STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG;
-#endif // CONFIG_STA_SUPPORT //
 
 // ----------- start of AP --------------------------
 // AUTH-RSP State Machine Aux data structure
@@ -2555,7 +2534,6 @@ typedef struct _RTMP_ADAPTER
 
 
 //=======STA===========
-#ifdef CONFIG_STA_SUPPORT
 /* Modified by Wu Xi-Kun 4/21/2006 */
 	// -----------------------------------------------
 	// STA specific configuration & operation status
@@ -2565,7 +2543,6 @@ typedef struct _RTMP_ADAPTER
 	STA_ACTIVE_CONFIG       StaActive;         // valid only when ADHOC_ON(pAd) || INFRA_ON(pAd)
 	CHAR                    nickname[IW_ESSID_MAX_SIZE+1]; // nickname, only used in the iwconfig i/f
 	NDIS_MEDIA_STATE        PreMediaState;
-#endif // CONFIG_STA_SUPPORT //
 
 //=======Common===========
 	// OP mode: either AP or STA
@@ -3185,12 +3162,9 @@ VOID PeerPublicAction(
 	IN PRTMP_ADAPTER pAd,
 	IN MLME_QUEUE_ELEM *Elem);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID StaPublicAction(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR Bss2040Coexist);
-#endif // CONFIG_STA_SUPPORT //
-
 
 VOID PeerBSSTranAction(
 	IN PRTMP_ADAPTER pAd,
@@ -3446,7 +3420,6 @@ PQUEUE_HEADER   RTMPCheckTxSwQueue(
 	IN  PRTMP_ADAPTER   pAd,
 	OUT UCHAR           *QueIdx);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID RTMPReportMicError(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  PCIPHER_KEY     pWpaKey);
@@ -3460,7 +3433,6 @@ VOID    WpaDisassocApAndBlockAssoc(
     IN  PVOID FunctionContext,
     IN  PVOID SystemSpecific2,
     IN  PVOID SystemSpecific3);
-#endif // CONFIG_STA_SUPPORT //
 
 NDIS_STATUS RTMPCloneNdisPacket(
 	IN  PRTMP_ADAPTER   pAd,
@@ -3600,7 +3572,6 @@ VOID AsicRfTuningExec(
 	IN PVOID SystemSpecific2,
 	IN PVOID SystemSpecific3);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID AsicSleepThenAutoWakeup(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  USHORT TbttNumToNextWakeUp);
@@ -3611,7 +3582,6 @@ VOID AsicForceSleep(
 VOID AsicForceWakeup(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR    	 Level);
-#endif // CONFIG_STA_SUPPORT //
 
 VOID AsicSetBssid(
 	IN  PRTMP_ADAPTER   pAd,
@@ -4354,9 +4324,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 	OUT PQOS_CAPABILITY_PARM pQosCapability,
 	OUT ULONG *pRalinkIe,
 	OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
 	OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
 	OUT HT_CAPABILITY_IE *pHtCapability,
 	OUT UCHAR		 *AddHtInfoLen,
 	OUT ADD_HT_INFO_IE *AddHtInfo,
@@ -4595,12 +4563,10 @@ VOID    RTMPCheckRates(
 	IN OUT  UCHAR           SupRate[],
 	IN OUT  UCHAR           *SupRateLen);
 
-#ifdef CONFIG_STA_SUPPORT
 BOOLEAN RTMPCheckChannel(
 	IN PRTMP_ADAPTER pAd,
 	IN UCHAR		CentralChannel,
 	IN UCHAR		Channel);
-#endif // CONFIG_STA_SUPPORT //
 
 BOOLEAN 	RTMPCheckHt(
 	IN		PRTMP_ADAPTER	pAd,
@@ -4841,13 +4807,11 @@ VOID RTMPIndicateWPA2Status(
 VOID	RTMPOPModeSwitching(
 	IN	PRTMP_ADAPTER	pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID    RTMPAddBSSIDCipher(
     IN  PRTMP_ADAPTER   pAd,
 	IN	UCHAR	Aid,
     IN  PNDIS_802_11_KEY    pKey,
     IN  UCHAR   CipherAlg);
-#endif // CONFIG_STA_SUPPORT //
 
 #ifdef DOT11_N_SUPPORT
 VOID	RTMPSetHT(
@@ -5766,9 +5730,6 @@ INT	Set_HtTxBASize_Proc(
 	IN	PUCHAR			arg);
 #endif // DOT11_N_SUPPORT //
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 //Dls ,	kathy
 VOID RTMPSendDLSTearDownFrame(
 	IN	PRTMP_ADAPTER	pAd,
@@ -5801,10 +5762,6 @@ int wext_notify_event_assoc(
 	IN  RTMP_ADAPTER *pAd);
 #endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
 
-#endif // CONFIG_STA_SUPPORT //
-
-
-
 #ifdef DOT11_N_SUPPORT
 VOID Handle_BSS_Width_Trigger_Events(
 	IN PRTMP_ADAPTER pAd);
@@ -5864,8 +5821,6 @@ UINT deaggregate_AMSDU_announce(
 	IN	PUCHAR			pData,
 	IN	ULONG			DataSize);
 
-
-#ifdef CONFIG_STA_SUPPORT
 // remove LLC and get 802_3 Header
 #define  RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3)	\
 {																				\
@@ -5896,8 +5851,6 @@ UINT deaggregate_AMSDU_announce(
 	CONVERT_TO_802_3(_pHeader802_3, _pDA, _pSA, _pRxBlk->pData, 				\
 		_pRxBlk->DataSize, _pRemovedLLCSNAP);                                   \
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 BOOLEAN APFowardWirelessStaToWirelessSta(
 	IN	PRTMP_ADAPTER	pAd,
@@ -5914,13 +5867,9 @@ VOID Sta_Announce_or_Forward_802_3_Packet(
 	IN	PNDIS_PACKET	pPacket,
 	IN	UCHAR			FromWhichBSSID);
 
-
-#ifdef CONFIG_STA_SUPPORT
 #define ANNOUNCE_OR_FORWARD_802_3_PACKET(_pAd, _pPacket, _FromWhichBSS)\
 			Sta_Announce_or_Forward_802_3_Packet(_pAd, _pPacket, _FromWhichBSS);
 			//announce_802_3_packet(_pAd, _pPacket);
-#endif // CONFIG_STA_SUPPORT //
-
 
 PNDIS_PACKET DuplicatePacket(
 	IN	PRTMP_ADAPTER	pAd,
@@ -5963,8 +5912,6 @@ PNDIS_PACKET RTMPDeFragmentDataFrame(
 	IN	RX_BLK			*pRxBlk);
 
 ////////////////////////////////////////
-
-#ifdef CONFIG_STA_SUPPORT
 enum {
 	DIDmsg_lnxind_wlansniffrm		= 0x00000044,
 	DIDmsg_lnxind_wlansniffrm_hosttime	= 0x00010044,
@@ -6077,7 +6024,6 @@ struct iw_statistics *rt28xx_get_wireless_stats(
 VOID    RTMPSetDesiredRates(
     IN  PRTMP_ADAPTER   pAdapter,
     IN  LONG            Rates);
-#endif // CONFIG_STA_SUPPORT //
 
 INT	Set_FixedTxMode_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -6159,13 +6105,10 @@ INT rt28xx_ioctl(
 	IN	OUT	struct ifreq	*rq,
 	IN	INT			cmd);
 
-
-#ifdef CONFIG_STA_SUPPORT
 INT rt28xx_sta_ioctl(
 	IN	struct net_device	*net_dev,
 	IN	OUT	struct ifreq	*rq,
 	IN	INT			cmd);
-#endif // CONFIG_STA_SUPPORT //
 
 BOOLEAN RT28XXSecurityKeyAdd(
 	IN		PRTMP_ADAPTER		pAd,
@@ -6249,7 +6192,6 @@ NDIS_STATUS RTMPCheckRxError(
 	IN	PRXWI_STRUC	pRxWI,
 	IN  PRT28XX_RXD_STRUC      pRxD);
 
-#ifdef CONFIG_STA_SUPPORT
 VOID RTMPInitPCIeLinkCtrlValue(
 	IN	PRTMP_ADAPTER	pAd);
 
@@ -6292,7 +6234,6 @@ VOID  RadioOnExec(
 	IN PVOID FunctionContext,
 	IN PVOID SystemSpecific2,
 	IN PVOID SystemSpecific3);
-#endif // CONFIG_STA_SUPPORT //
 
 VOID RT28xxPciMlmeRadioOn(
 	IN PRTMP_ADAPTER pAd);
@@ -6334,7 +6275,6 @@ PCHAR   RTMPGetRalinkEncryModeStr(
     IN  USHORT encryMode);
 //////////////////////////////////////
 
-#ifdef CONFIG_STA_SUPPORT
 VOID AsicStaBbpTuning(
 	IN PRTMP_ADAPTER pAd);
 
@@ -6349,7 +6289,6 @@ VOID AsicResetMAC(
 
 VOID AsicResetPBF(
 	IN PRTMP_ADAPTER pAd);
-#endif // CONFIG_STA_SUPPORT //
 
 void RTMP_IndicateMediaState(
 	IN	PRTMP_ADAPTER	pAd);

drivers/staging/rt2860/rtmp_def.h

@@ -1363,7 +1363,6 @@
 
 // End - WIRELESS EVENTS definition
 
-#ifdef CONFIG_STA_SUPPORT
 // definition for DLS, kathy
 #define	MAX_NUM_OF_INIT_DLS_ENTRY   1
 #define	MAX_NUM_OF_DLS_ENTRY        MAX_NUMBER_OF_DLS_ENTRY
@@ -1381,7 +1380,6 @@
 /* Maximum size of the ESSID and pAd->nickname strings */
 #define IW_ESSID_MAX_SIZE   		32
 #endif
-#endif // CONFIG_STA_SUPPORT //
 
 #ifdef MCAST_RATE_SPECIFIC
 #define MCAST_DISABLE	0