usb: musb: move musb_start to musb_virthub.c

This function has its only user in musb_virthub.c, so let's move it
there and make it static.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/musb/musb_core.c

@@ -897,51 +897,6 @@ b_host:
 
 /*-------------------------------------------------------------------------*/
 
-/*
-* Program the HDRC to start (enable interrupts, dma, etc.).
-*/
-void musb_start(struct musb *musb)
-{
-	void __iomem	*regs = musb->mregs;
-	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
-
-	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
-
-	/*  Set INT enable registers, enable interrupts */
-	musb->intrtxe = musb->epmask;
-	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
-	musb->intrrxe = musb->epmask & 0xfffe;
-	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
-	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
-	musb_writeb(regs, MUSB_TESTMODE, 0);
-
-	/* put into basic highspeed mode and start session */
-	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
-						| MUSB_POWER_HSENAB
-						/* ENSUSPEND wedges tusb */
-						/* | MUSB_POWER_ENSUSPEND */
-						);
-
-	musb->is_active = 0;
-	devctl = musb_readb(regs, MUSB_DEVCTL);
-	devctl &= ~MUSB_DEVCTL_SESSION;
-
-	/* session started after:
-	 * (a) ID-grounded irq, host mode;
-	 * (b) vbus present/connect IRQ, peripheral mode;
-	 * (c) peripheral initiates, using SRP
-	 */
-	if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
-		musb->is_active = 1;
-	else
-		devctl |= MUSB_DEVCTL_SESSION;
-
-	musb_platform_enable(musb);
-	musb_writeb(regs, MUSB_DEVCTL, devctl);
-}
-
-
 static void musb_generic_disable(struct musb *musb)
 {
 	void __iomem	*mbase = musb->mregs;

drivers/usb/musb/musb_core.h

@@ -502,7 +502,6 @@ static inline void musb_configure_ep0(struct musb *musb)
 
 extern const char musb_driver_name[];
 
-extern void musb_start(struct musb *musb);
 extern void musb_stop(struct musb *musb);
 
 extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);

drivers/usb/musb/musb_virthub.c

@@ -44,6 +44,50 @@
 
 #include "musb_core.h"
 
+/*
+* Program the HDRC to start (enable interrupts, dma, etc.).
+*/
+static void musb_start(struct musb *musb)
+{
+	void __iomem	*regs = musb->mregs;
+	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
+
+	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
+
+	/*  Set INT enable registers, enable interrupts */
+	musb->intrtxe = musb->epmask;
+	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+	musb->intrrxe = musb->epmask & 0xfffe;
+	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+	musb_writeb(regs, MUSB_TESTMODE, 0);
+
+	/* put into basic highspeed mode and start session */
+	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+						| MUSB_POWER_HSENAB
+						/* ENSUSPEND wedges tusb */
+						/* | MUSB_POWER_ENSUSPEND */
+						);
+
+	musb->is_active = 0;
+	devctl = musb_readb(regs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+
+	/* session started after:
+	 * (a) ID-grounded irq, host mode;
+	 * (b) vbus present/connect IRQ, peripheral mode;
+	 * (c) peripheral initiates, using SRP
+	 */
+	if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
+		musb->is_active = 1;
+	} else {
+		devctl |= MUSB_DEVCTL_SESSION;
+	}
+
+	musb_platform_enable(musb);
+	musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
 
 static void musb_port_suspend(struct musb *musb, bool do_suspend)
 {