Browse Source

usb: chipidea: introduce dual role mode pdata flags

Even if a chipidea core is otg capable the board may not be. This allows
to explicitly set the core to host/peripheral mode. Without these flags
the driver falls back to the old behaviour.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sascha Hauer 12 years ago
parent
commit
691962d159

+ 1 - 0
Documentation/devicetree/bindings/usb/ci13xxx-imx.txt

@@ -9,6 +9,7 @@ Recommended properies:
 - phy_type: the type of the phy connected to the core. Should be one
   of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
   property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
 
 Optional properties:
 - fsl,usbphy: phandler of usb phy that connects to the only one port

+ 18 - 6
drivers/usb/chipidea/core.c

@@ -405,6 +405,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	struct resource	*res;
 	void __iomem	*base;
 	int		ret;
+	enum usb_dr_mode dr_mode;
 
 	if (!dev->platform_data) {
 		dev_err(dev, "platform data missing\n");
@@ -456,14 +457,25 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	if (!ci->platdata->phy_mode)
 		ci->platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
 
+	if (!ci->platdata->dr_mode)
+		ci->platdata->dr_mode = of_usb_get_dr_mode(dev->of_node);
+
+	if (ci->platdata->dr_mode == USB_DR_MODE_UNKNOWN)
+		ci->platdata->dr_mode = USB_DR_MODE_OTG;
+
+	dr_mode = ci->platdata->dr_mode;
 	/* initialize role(s) before the interrupt is requested */
-	ret = ci_hdrc_host_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support host\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+		ret = ci_hdrc_host_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support host\n");
+	}
 
-	ret = ci_hdrc_gadget_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support gadget\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+		ret = ci_hdrc_gadget_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support gadget\n");
+	}
 
 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
 		dev_err(dev, "no supported roles\n");

+ 1 - 1
include/linux/usb/chipidea.h

@@ -20,7 +20,7 @@ struct ci13xxx_platform_data {
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
 #define CI13XXX_PULLUP_ON_VBUS		BIT(2)
 #define CI13XXX_DISABLE_STREAMING	BIT(3)
-
+	enum usb_dr_mode	dr_mode;
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
 	void	(*notify_event) (struct ci13xxx *ci, unsigned event);