[ARM] Merge individual ARM sub-trees

Merge:
 Atmel AT91RM9200 and AT91SAM9260 changes
 General ARM developments
 Disconfiguous memory cleanups
 64-bit/32-bit division and sched_clock extension patches
 EP93xx support changes
 IOP support changes

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

MAINTAINERS

@@ -348,6 +348,13 @@ P:	Ian Molton
 M:	spyro@f2s.com
 S:	Maintained
 
+ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
+P:      Andrew Victor
+M:      andrew@sanpeople.com
+L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W:      http://maxim.org.za/at91_26.html
+S:      Maintained
+
 ARM/CORGI MACHINE SUPPORT
 P:	Richard Purdie
 M:	rpurdie@rpsys.net

arch/arm/Kconfig

@@ -223,6 +223,12 @@ config ARCH_IOP33X
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
+config ARCH_IOP13XX
+	bool "IOP13xx-based"
+	select PCI
+	help
+	  Support for Intel's IOP13XX (XScale) family of processors.
+
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
@@ -331,6 +337,8 @@ source "arch/arm/mach-iop32x/Kconfig"
 
 source "arch/arm/mach-iop33x/Kconfig"
 
+source "arch/arm/mach-iop13xx/Kconfig"
+
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-ixp2000/Kconfig"
@@ -374,6 +382,14 @@ config PLAT_IOP
 
 source arch/arm/mm/Kconfig
 
+config IWMMXT
+	bool "Enable iWMMXt support"
+	depends CPU_XSCALE || CPU_XSC3
+	default y if PXA27x
+	help
+	  Enable support for iWMMXt context switching at run time if
+	  running on a CPU that supports it.
+
 #  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
 config XSCALE_PMU
 	bool
@@ -583,7 +599,7 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91RM9200 || MACH_TRIZEPS4
+		   ARCH_AT91 || MACH_TRIZEPS4
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.

arch/arm/Kconfig.debug

@@ -32,10 +32,6 @@ config DEBUG_USER
 	      8 - SIGSEGV faults
 	     16 - SIGBUS faults
 
-config DEBUG_WAITQ
-	bool "Wait queue debugging"
-	depends on DEBUG_KERNEL
-
 config DEBUG_ERRORS
 	bool "Verbose kernel error messages"
 	depends on DEBUG_KERNEL

arch/arm/Makefile

@@ -15,6 +15,8 @@ CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 OBJCOPYFLAGS	:=-O binary -R .note -R .comment -S
 GZFLAGS		:=-9
 #CFLAGS		+=-pipe
+# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
+CFLAGS		+=$(call cc-option,-marm,)
 
 # Do not use arch/arm/defconfig - it's always outdated.
 # Select a platform tht is kept up-to-date
@@ -108,6 +110,7 @@ endif
  machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
  machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
  machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
+ machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx

arch/arm/common/gic.c

@@ -160,7 +160,7 @@ void __init gic_dist_init(void __iomem *base)
 	 */
 	for (i = 29; i < max_irq; i++) {
 		set_irq_chip(i, &gic_chip);
-		set_irq_handler(i, do_level_IRQ);
+		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
 

arch/arm/common/locomo.c

@@ -163,11 +163,11 @@ static struct locomo_dev_info locomo_devices[] = {
 #define	LOCOMO_IRQ_LT_START	(IRQ_LOCOMO_LT)
 #define	LOCOMO_IRQ_SPI_START	(IRQ_LOCOMO_SPI_RFR)
 
-static void locomo_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int req, i;
-	struct irqdesc *d;
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	struct irq_desc *d;
+	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	/* Acknowledge the parent IRQ */
 	desc->chip->ack(irq);
@@ -194,7 +194,7 @@ static void locomo_ack_irq(unsigned int irq)
 
 static void locomo_mask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_ICR);
 	r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
@@ -203,7 +203,7 @@ static void locomo_mask_irq(unsigned int irq)
 
 static void locomo_unmask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_ICR);
 	r |= (0x0010 << (irq - LOCOMO_IRQ_START));
@@ -217,10 +217,10 @@ static struct irq_chip locomo_chip = {
 	.unmask	= locomo_unmask_irq,
 };
 
-static void locomo_key_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
 {
-	struct irqdesc *d;
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	struct irq_desc *d;
+	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
 		d = irq_desc + LOCOMO_IRQ_KEY_START;
@@ -230,7 +230,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc)
 
 static void locomo_key_ack_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
 	r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
@@ -239,7 +239,7 @@ static void locomo_key_ack_irq(unsigned int irq)
 
 static void locomo_key_mask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
 	r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
@@ -248,7 +248,7 @@ static void locomo_key_mask_irq(unsigned int irq)
 
 static void locomo_key_unmask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
 	r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
@@ -262,11 +262,11 @@ static struct irq_chip locomo_key_chip = {
 	.unmask	= locomo_key_unmask_irq,
 };
 
-static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int req, i;
-	struct irqdesc *d;
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	struct irq_desc *d;
+	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	req = 	locomo_readl(mapbase + LOCOMO_GIR) &
 		locomo_readl(mapbase + LOCOMO_GPD) &
@@ -285,7 +285,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc)
 
 static void locomo_gpio_ack_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_GWE);
 	r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -302,7 +302,7 @@ static void locomo_gpio_ack_irq(unsigned int irq)
 
 static void locomo_gpio_mask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_GIE);
 	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -311,7 +311,7 @@ static void locomo_gpio_mask_irq(unsigned int irq)
 
 static void locomo_gpio_unmask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_GIE);
 	r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -325,10 +325,10 @@ static struct irq_chip locomo_gpio_chip = {
 	.unmask	= locomo_gpio_unmask_irq,
 };
 
-static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
 {
-	struct irqdesc *d;
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	struct irq_desc *d;
+	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
 		d = irq_desc + LOCOMO_IRQ_LT_START;
@@ -338,7 +338,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc)
 
 static void locomo_lt_ack_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_LTINT);
 	r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
@@ -347,7 +347,7 @@ static void locomo_lt_ack_irq(unsigned int irq)
 
 static void locomo_lt_mask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_LTINT);
 	r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
@@ -356,7 +356,7 @@ static void locomo_lt_mask_irq(unsigned int irq)
 
 static void locomo_lt_unmask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_LTINT);
 	r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
@@ -370,11 +370,11 @@ static struct irq_chip locomo_lt_chip = {
 	.unmask	= locomo_lt_unmask_irq,
 };
 
-static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc)
+static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int req, i;
-	struct irqdesc *d;
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	struct irq_desc *d;
+	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
 	if (req) {
@@ -391,7 +391,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc)
 
 static void locomo_spi_ack_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
 	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -408,7 +408,7 @@ static void locomo_spi_ack_irq(unsigned int irq)
 
 static void locomo_spi_mask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
 	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -417,7 +417,7 @@ static void locomo_spi_mask_irq(unsigned int irq)
 
 static void locomo_spi_unmask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned int r;
 	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
 	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -440,55 +440,55 @@ static void locomo_setup_irq(struct locomo *lchip)
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
 	set_irq_type(lchip->irq, IRQT_FALLING);
-	set_irq_chipdata(lchip->irq, irqbase);
+	set_irq_chip_data(lchip->irq, irqbase);
 	set_irq_chained_handler(lchip->irq, locomo_handler);
 
 	/* Install handlers for IRQ_LOCOMO_*_BASE */
 	set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
-	set_irq_chipdata(IRQ_LOCOMO_KEY_BASE, irqbase);
+	set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
 	set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
-	set_irq_chipdata(IRQ_LOCOMO_GPIO_BASE, irqbase);
+	set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
 	set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
-	set_irq_chipdata(IRQ_LOCOMO_LT_BASE, irqbase);
+	set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
 	set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
-	set_irq_chipdata(IRQ_LOCOMO_SPI_BASE, irqbase);
+	set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
 	set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
 
 	/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
 	set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
-	set_irq_chipdata(LOCOMO_IRQ_KEY_START, irqbase);
-	set_irq_handler(LOCOMO_IRQ_KEY_START, do_edge_IRQ);
+	set_irq_chip_data(LOCOMO_IRQ_KEY_START, irqbase);
+	set_irq_handler(LOCOMO_IRQ_KEY_START, handle_edge_irq);
 	set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE);
 
 	/* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */
 	for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) {
 		set_irq_chip(irq, &locomo_gpio_chip);
-		set_irq_chipdata(irq, irqbase);
-		set_irq_handler(irq, do_edge_IRQ);
+		set_irq_chip_data(irq, irqbase);
+		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
 	/* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */
 	set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip);
-	set_irq_chipdata(LOCOMO_IRQ_LT_START, irqbase);
-	set_irq_handler(LOCOMO_IRQ_LT_START, do_edge_IRQ);
+	set_irq_chip_data(LOCOMO_IRQ_LT_START, irqbase);
+	set_irq_handler(LOCOMO_IRQ_LT_START, handle_edge_irq);
 	set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
 
 	/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
 	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
 		set_irq_chip(irq, &locomo_spi_chip);
-		set_irq_chipdata(irq, irqbase);
-		set_irq_handler(irq, do_edge_IRQ);
+		set_irq_chip_data(irq, irqbase);
+		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 }

arch/arm/common/sa1111.c

@@ -147,7 +147,7 @@ void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *ho
  * will call us again if there are more interrupts to process.
  */
 static void
-sa1111_irq_handler(unsigned int irq, struct irqdesc *desc)
+sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int stat0, stat1, i;
 	void __iomem *base = get_irq_data(irq);
@@ -187,7 +187,7 @@ static void sa1111_ack_irq(unsigned int irq)
 
 static void sa1111_mask_lowirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ie0;
 
 	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -197,7 +197,7 @@ static void sa1111_mask_lowirq(unsigned int irq)
 
 static void sa1111_unmask_lowirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ie0;
 
 	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -215,7 +215,7 @@ static void sa1111_unmask_lowirq(unsigned int irq)
 static int sa1111_retrigger_lowirq(unsigned int irq)
 {
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 	int i;
 
@@ -236,7 +236,7 @@ static int sa1111_retrigger_lowirq(unsigned int irq)
 static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 {
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 
 	if (flags == IRQT_PROBE)
@@ -259,7 +259,7 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 static int sa1111_wake_lowirq(unsigned int irq, unsigned int on)
 {
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long we0;
 
 	we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
@@ -284,7 +284,7 @@ static struct irq_chip sa1111_low_chip = {
 
 static void sa1111_mask_highirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ie1;
 
 	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -294,7 +294,7 @@ static void sa1111_mask_highirq(unsigned int irq)
 
 static void sa1111_unmask_highirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ie1;
 
 	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -312,7 +312,7 @@ static void sa1111_unmask_highirq(unsigned int irq)
 static int sa1111_retrigger_highirq(unsigned int irq)
 {
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 	int i;
 
@@ -333,7 +333,7 @@ static int sa1111_retrigger_highirq(unsigned int irq)
 static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 {
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 
 	if (flags == IRQT_PROBE)
@@ -356,7 +356,7 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 static int sa1111_wake_highirq(unsigned int irq, unsigned int on)
 {
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chipdata(irq);
+	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long we1;
 
 	we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
@@ -410,15 +410,15 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 
 	for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
 		set_irq_chip(irq, &sa1111_low_chip);
-		set_irq_chipdata(irq, irqbase);
-		set_irq_handler(irq, do_edge_IRQ);
+		set_irq_chip_data(irq, irqbase);
+		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
 	for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
 		set_irq_chip(irq, &sa1111_high_chip);
-		set_irq_chipdata(irq, irqbase);
-		set_irq_handler(irq, do_edge_IRQ);
+		set_irq_chip_data(irq, irqbase);
+		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 

arch/arm/common/vic.c

@@ -27,14 +27,14 @@
 
 static void vic_mask_irq(unsigned int irq)
 {
-	void __iomem *base = get_irq_chipdata(irq);
+	void __iomem *base = get_irq_chip_data(irq);
 	irq &= 31;
 	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 }
 
 static void vic_unmask_irq(unsigned int irq)
 {
-	void __iomem *base = get_irq_chipdata(irq);
+	void __iomem *base = get_irq_chip_data(irq);
 	irq &= 31;
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
@@ -88,10 +88,10 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		unsigned int irq = irq_start + i;
 
 		set_irq_chip(irq, &vic_chip);
-		set_irq_chipdata(irq, base);
+		set_irq_chip_data(irq, base);
 
 		if (vic_sources & (1 << i)) {
-			set_irq_handler(irq, do_level_IRQ);
+			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}

arch/arm/configs/at91rm9200dk_defconfig

@@ -357,9 +357,9 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x10000000
-CONFIG_MTD_PHYSMAP_LEN=0x200000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -585,7 +585,9 @@ CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_USBPCWATCHDOG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
-CONFIG_AT91_RTC=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -979,7 +981,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/at91rm9200ek_defconfig

@@ -348,9 +348,9 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x10000000
-CONFIG_MTD_PHYSMAP_LEN=0x800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -566,7 +566,9 @@ CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_USBPCWATCHDOG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
-CONFIG_AT91_RTC=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -968,7 +970,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/at91sam9260ek_defconfig

@@ -0,0 +1,950 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc6
+# Fri Nov 17 18:42:21 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+
+#
+# AT91SAM9260 Board Type
+#
+CONFIG_MACH_AT91SAM9260EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y

arch/arm/configs/at91sam9261ek_defconfig

@@ -0,0 +1,1106 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc6
+# Fri Nov 17 18:00:38 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+CONFIG_ARCH_AT91SAM9261=y
+
+#
+# AT91SAM9261 Board Type
+#
+CONFIG_MACH_AT91SAM9261EK=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y

arch/arm/configs/badge4_defconfig

@@ -1216,7 +1216,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/carmeva_defconfig

@@ -474,7 +474,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 

arch/arm/configs/cerfcube_defconfig

@@ -851,7 +851,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/collie_defconfig

@@ -934,7 +934,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/corgi_defconfig

@@ -1513,7 +1513,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/csb337_defconfig

@@ -1113,7 +1113,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/csb637_defconfig

@@ -623,7 +623,7 @@ CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_USBPCWATCHDOG is not set
 # CONFIG_NVRAM is not set
 CONFIG_RTC=y
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -1062,7 +1062,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/ep93xx_defconfig

@@ -125,6 +125,7 @@ CONFIG_CRUNCH=y
 #
 # EP93xx Platforms
 #
+CONFIG_MACH_ADSSPHERE=y
 CONFIG_MACH_EDB9302=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
@@ -1134,7 +1135,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_WAITQ=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/h7202_defconfig

@@ -702,7 +702,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/hackkit_defconfig

@@ -740,7 +740,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_WAITQ=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/integrator_defconfig

@@ -835,7 +835,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/iop13xx_defconfig

@@ -0,0 +1,1134 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19
+# Fri Dec  1 10:51:01 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+CONFIG_ARCH_IOP13XX=y
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# IOP13XX Implementation Options
+#
+
+#
+# IOP13XX Platform Support
+#
+CONFIG_MACH_IQ81340SC=y
+CONFIG_MACH_IQ81340MC=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=8192,rsize=8192"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfa000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+# CONFIG_MD_LINEAR is not set
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MD_RAID5_RESHAPE is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_IOP3XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y

arch/arm/configs/iop32x_defconfig

@@ -1204,7 +1204,6 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/iop33x_defconfig

@@ -1051,7 +1051,6 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/ixp2000_defconfig

@@ -1026,7 +1026,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/ixp23xx_defconfig

@@ -1305,7 +1305,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/ixp4xx_defconfig

@@ -1243,7 +1243,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/jornada720_defconfig

@@ -889,7 +889,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/kb9202_defconfig

@@ -437,7 +437,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -753,7 +753,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/lpd270_defconfig

@@ -949,7 +949,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/lpd7a400_defconfig

@@ -850,7 +850,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/lpd7a404_defconfig

@@ -1100,7 +1100,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/lubbock_defconfig

@@ -772,7 +772,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/mainstone_defconfig

@@ -766,7 +766,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/mx1ads_defconfig

@@ -691,7 +691,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/neponset_defconfig

@@ -1115,7 +1115,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/netwinder_defconfig

@@ -994,7 +994,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/netx_defconfig

@@ -872,7 +872,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/onearm_defconfig

@@ -1045,7 +1045,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/pleb_defconfig

@@ -721,7 +721,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/pnx4008_defconfig

@@ -1604,7 +1604,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/pxa255-idp_defconfig

@@ -768,7 +768,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/realview-smp_defconfig

@@ -967,7 +967,6 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/realview_defconfig

@@ -759,7 +759,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/rpc_defconfig

@@ -910,7 +910,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/s3c2410_defconfig

@@ -1319,7 +1319,6 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/shark_defconfig

@@ -965,7 +965,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_LL is not set
 

arch/arm/configs/simpad_defconfig

@@ -934,7 +934,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/spitz_defconfig

@@ -1406,7 +1406,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/configs/versatile_defconfig

@@ -972,7 +972,6 @@ CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set

arch/arm/kernel/Makefile

@@ -24,7 +24,9 @@ obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
 
-obj-$(CONFIG_IWMMXT)		+= iwmmxt.o iwmmxt-notifier.o
+obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
+obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
+obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 
 ifneq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/kernel/apm.c

@@ -12,7 +12,6 @@
  */
 #include <linux/module.h>
 #include <linux/poll.h>
-#include <linux/timer.h>
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <linux/miscdevice.h>
@@ -26,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/completion.h>
 #include <linux/kthread.h>
+#include <linux/delay.h>
 
 #include <asm/apm.h> /* apm_power_info */
 #include <asm/system.h>
@@ -71,7 +71,8 @@ struct apm_user {
 #define SUSPEND_PENDING	1		/* suspend pending read */
 #define SUSPEND_READ	2		/* suspend read, pending ack */
 #define SUSPEND_ACKED	3		/* suspend acked */
-#define SUSPEND_DONE	4		/* suspend completed */
+#define SUSPEND_WAIT	4		/* waiting for suspend */
+#define SUSPEND_DONE	5		/* suspend completed */
 
 	struct apm_queue	queue;
 };
@@ -101,6 +102,7 @@ static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
 static DEFINE_SPINLOCK(kapmd_queue_lock);
 static struct apm_queue kapmd_queue;
 
+static DEFINE_MUTEX(state_lock);
 
 static const char driver_version[] = "1.13";	/* no spaces */
 
@@ -148,38 +150,60 @@ static void queue_add_event(struct apm_queue *q, apm_event_t event)
 	q->events[q->event_head] = event;
 }
 
-static void queue_event_one_user(struct apm_user *as, apm_event_t event)
+static void queue_event(apm_event_t event)
 {
-	if (as->suser && as->writer) {
-		switch (event) {
-		case APM_SYS_SUSPEND:
-		case APM_USER_SUSPEND:
-			/*
-			 * If this user already has a suspend pending,
-			 * don't queue another one.
-			 */
-			if (as->suspend_state != SUSPEND_NONE)
-				return;
+	struct apm_user *as;
 
-			as->suspend_state = SUSPEND_PENDING;
-			suspends_pending++;
-			break;
-		}
+	down_read(&user_list_lock);
+	list_for_each_entry(as, &apm_user_list, list) {
+		if (as->reader)
+			queue_add_event(&as->queue, event);
 	}
-	queue_add_event(&as->queue, event);
+	up_read(&user_list_lock);
+	wake_up_interruptible(&apm_waitqueue);
 }
 
-static void queue_event(apm_event_t event, struct apm_user *sender)
+/*
+ * queue_suspend_event - queue an APM suspend event.
+ *
+ * Check that we're in a state where we can suspend.  If not,
+ * return -EBUSY.  Otherwise, queue an event to all "writer"
+ * users.  If there are no "writer" users, return '1' to
+ * indicate that we can immediately suspend.
+ */
+static int queue_suspend_event(apm_event_t event, struct apm_user *sender)
 {
 	struct apm_user *as;
+	int ret = 1;
 
+	mutex_lock(&state_lock);
 	down_read(&user_list_lock);
+
+	/*
+	 * If a thread is still processing, we can't suspend, so reject
+	 * the request.
+	 */
 	list_for_each_entry(as, &apm_user_list, list) {
-		if (as != sender && as->reader)
-			queue_event_one_user(as, event);
+		if (as != sender && as->reader && as->writer && as->suser &&
+		    as->suspend_state != SUSPEND_NONE) {
+			ret = -EBUSY;
+			goto out;
+		}
 	}
+
+	list_for_each_entry(as, &apm_user_list, list) {
+		if (as != sender && as->reader && as->writer && as->suser) {
+			as->suspend_state = SUSPEND_PENDING;
+			suspends_pending++;
+			queue_add_event(&as->queue, event);
+			ret = 0;
+		}
+	}
+ out:
 	up_read(&user_list_lock);
+	mutex_unlock(&state_lock);
 	wake_up_interruptible(&apm_waitqueue);
+	return ret;
 }
 
 static void apm_suspend(void)
@@ -191,17 +215,22 @@ static void apm_suspend(void)
 	 * Anyone on the APM queues will think we're still suspended.
 	 * Send a message so everyone knows we're now awake again.
 	 */
-	queue_event(APM_NORMAL_RESUME, NULL);
+	queue_event(APM_NORMAL_RESUME);
 
 	/*
 	 * Finally, wake up anyone who is sleeping on the suspend.
 	 */
+	mutex_lock(&state_lock);
 	down_read(&user_list_lock);
 	list_for_each_entry(as, &apm_user_list, list) {
-		as->suspend_result = err;
-		as->suspend_state = SUSPEND_DONE;
+		if (as->suspend_state == SUSPEND_WAIT ||
+		    as->suspend_state == SUSPEND_ACKED) {
+	  		as->suspend_result = err;
+			as->suspend_state = SUSPEND_DONE;
+		}
 	}
 	up_read(&user_list_lock);
+	mutex_unlock(&state_lock);
 
 	wake_up(&apm_suspend_waitqueue);
 }
@@ -227,8 +256,11 @@ static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t
 		if (copy_to_user(buf, &event, sizeof(event)))
 			break;
 
-		if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)
+		mutex_lock(&state_lock);
+		if (as->suspend_state == SUSPEND_PENDING &&
+		    (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND))
 			as->suspend_state = SUSPEND_READ;
+		mutex_unlock(&state_lock);
 
 		buf += sizeof(event);
 		i -= sizeof(event);
@@ -270,9 +302,13 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
 
 	switch (cmd) {
 	case APM_IOC_SUSPEND:
+		mutex_lock(&state_lock);
+
 		as->suspend_result = -EINTR;
 
 		if (as->suspend_state == SUSPEND_READ) {
+			int pending;
+
 			/*
 			 * If we read a suspend command from /dev/apm_bios,
 			 * then the corresponding APM_IOC_SUSPEND ioctl is
@@ -280,47 +316,73 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
 			 */
 			as->suspend_state = SUSPEND_ACKED;
 			suspends_pending--;
+			pending = suspends_pending == 0;
+			mutex_unlock(&state_lock);
+
+			/*
+			 * If there are no further acknowledges required,
+			 * suspend the system.
+			 */
+			if (pending)
+				apm_suspend();
+
+			/*
+			 * Wait for the suspend/resume to complete.  If there
+			 * are pending acknowledges, we wait here for them.
+			 *
+			 * Note: we need to ensure that the PM subsystem does
+			 * not kick us out of the wait when it suspends the
+			 * threads.
+			 */
+			flags = current->flags;
+			current->flags |= PF_NOFREEZE;
+
+			wait_event(apm_suspend_waitqueue,
+				   as->suspend_state == SUSPEND_DONE);
 		} else {
+			as->suspend_state = SUSPEND_WAIT;
+			mutex_unlock(&state_lock);
+
 			/*
 			 * Otherwise it is a request to suspend the system.
 			 * Queue an event for all readers, and expect an
 			 * acknowledge from all writers who haven't already
 			 * acknowledged.
 			 */
-			queue_event(APM_USER_SUSPEND, as);
-		}
-
-		/*
-		 * If there are no further acknowledges required, suspend
-		 * the system.
-		 */
-		if (suspends_pending == 0)
-			apm_suspend();
+			err = queue_suspend_event(APM_USER_SUSPEND, as);
+			if (err < 0) {
+				/*
+				 * Avoid taking the lock here - this
+				 * should be fine.
+				 */
+				as->suspend_state = SUSPEND_NONE;
+				break;
+			}
+
+			if (err > 0)
+				apm_suspend();
 
-		/*
-		 * Wait for the suspend/resume to complete.  If there are
-		 * pending acknowledges, we wait here for them.
-		 *
-		 * Note that we need to ensure that the PM subsystem does
-		 * not kick us out of the wait when it suspends the threads.
-		 */
-		flags = current->flags;
-		current->flags |= PF_NOFREEZE;
+			/*
+			 * Wait for the suspend/resume to complete.  If there
+			 * are pending acknowledges, we wait here for them.
+			 *
+			 * Note: we need to ensure that the PM subsystem does
+			 * not kick us out of the wait when it suspends the
+			 * threads.
+			 */
+			flags = current->flags;
+			current->flags |= PF_NOFREEZE;
 
-		/*
-		 * Note: do not allow a thread which is acking the suspend
-		 * to escape until the resume is complete.
-		 */
-		if (as->suspend_state == SUSPEND_ACKED)
-			wait_event(apm_suspend_waitqueue,
-					 as->suspend_state == SUSPEND_DONE);
-		else
 			wait_event_interruptible(apm_suspend_waitqueue,
 					 as->suspend_state == SUSPEND_DONE);
+		}
 
 		current->flags = flags;
+
+		mutex_lock(&state_lock);
 		err = as->suspend_result;
 		as->suspend_state = SUSPEND_NONE;
+		mutex_unlock(&state_lock);
 		break;
 	}
 
@@ -330,6 +392,8 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
 static int apm_release(struct inode * inode, struct file * filp)
 {
 	struct apm_user *as = filp->private_data;
+	int pending = 0;
+
 	filp->private_data = NULL;
 
 	down_write(&user_list_lock);
@@ -342,11 +406,14 @@ static int apm_release(struct inode * inode, struct file * filp)
 	 * need to balance suspends_pending, which means the
 	 * possibility of sleeping.
 	 */
+	mutex_lock(&state_lock);
 	if (as->suspend_state != SUSPEND_NONE) {
 		suspends_pending -= 1;
-		if (suspends_pending == 0)
-			apm_suspend();
+		pending = suspends_pending == 0;
 	}
+	mutex_unlock(&state_lock);
+	if (pending)
+		apm_suspend();
 
 	kfree(as);
 	return 0;
@@ -470,6 +537,7 @@ static int kapmd(void *arg)
 {
 	do {
 		apm_event_t event;
+		int ret;
 
 		wait_event_interruptible(kapmd_wait,
 				!queue_empty(&kapmd_queue) || kthread_should_stop());
@@ -489,13 +557,20 @@ static int kapmd(void *arg)
 
 		case APM_LOW_BATTERY:
 		case APM_POWER_STATUS_CHANGE:
-			queue_event(event, NULL);
+			queue_event(event);
 			break;
 
 		case APM_USER_SUSPEND:
 		case APM_SYS_SUSPEND:
-			queue_event(event, NULL);
-			if (suspends_pending == 0)
+			ret = queue_suspend_event(event, NULL);
+			if (ret < 0) {
+				/*
+				 * We were busy.  Try again in 50ms.
+				 */
+				queue_add_event(&kapmd_queue, event);
+				msleep(50);
+			}
+			if (ret > 0)
 				apm_suspend();
 			break;
 

arch/arm/kernel/asm-offsets.c

@@ -15,6 +15,7 @@
 #include <asm/mach/arch.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
+#include <asm/procinfo.h>
 
 /*
  * Make sure that the compiler and target are compatible.

arch/arm/kernel/ecard.c

@@ -529,7 +529,7 @@ static void ecard_dump_irq_state(void)
 	}
 }
 
-static void ecard_check_lockup(struct irqdesc *desc)
+static void ecard_check_lockup(struct irq_desc *desc)
 {
 	static unsigned long last;
 	static int lockup;
@@ -567,7 +567,7 @@ static void ecard_check_lockup(struct irqdesc *desc)
 }
 
 static void
-ecard_irq_handler(unsigned int irq, struct irqdesc *desc)
+ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	ecard_t *ec;
 	int called = 0;
@@ -585,7 +585,7 @@ ecard_irq_handler(unsigned int irq, struct irqdesc *desc)
 			pending = ecard_default_ops.irqpending(ec);
 
 		if (pending) {
-			struct irqdesc *d = irq_desc + ec->irq;
+			struct irq_desc *d = irq_desc + ec->irq;
 			desc_handle_irq(ec->irq, d);
 			called ++;
 		}
@@ -609,7 +609,7 @@ static unsigned char first_set[] =
 };
 
 static void
-ecard_irqexp_handler(unsigned int irq, struct irqdesc *desc)
+ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
 {
 	const unsigned int statusmask = 15;
 	unsigned int status;
@@ -1022,7 +1022,7 @@ ecard_probe(int slot, card_type_t type)
 	if (slot < 8) {
 		ec->irq = 32 + slot;
 		set_irq_chip(ec->irq, &ecard_chip);
-		set_irq_handler(ec->irq, do_level_IRQ);
+		set_irq_handler(ec->irq, handle_level_irq);
 		set_irq_flags(ec->irq, IRQF_VALID);
 	}
 

arch/arm/kernel/entry-armv.S

@@ -589,10 +589,6 @@ ENTRY(__switch_to)
 	strex	r5, r4, [ip]			@ Clear exclusive monitor
 #endif
 #endif
-#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
-	mra	r4, r5, acc0
-	stmia   ip, {r4, r5}
-#endif
 #if defined(CONFIG_HAS_TLS_REG)
 	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
 #elif !defined(CONFIG_TLS_REG_EMUL)
@@ -601,11 +597,6 @@ ENTRY(__switch_to)
 #endif
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
-#endif
-#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
-	add	r4, r2, #TI_CPU_DOMAIN + 40	@ cpu_context_save->extra
-	ldmib	r4, {r4, r5}
-	mar	acc0, r4, r5
 #endif
 	mov	r5, r0
 	add	r4, r2, #TI_CPU_SAVE

arch/arm/kernel/head-nommu.S

@@ -16,7 +16,6 @@
 
 #include <asm/assembler.h>
 #include <asm/mach-types.h>
-#include <asm/procinfo.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>

arch/arm/kernel/head.S

@@ -16,7 +16,6 @@
 
 #include <asm/assembler.h>
 #include <asm/domain.h>
-#include <asm/procinfo.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 #include <asm/memory.h>

arch/arm/kernel/irq.c

@@ -112,7 +112,7 @@ static struct irq_desc bad_irq_desc = {
 asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	struct irqdesc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_desc + irq;
 
 	/*
 	 * Some hardware gives randomly wrong interrupts.  Rather
@@ -134,7 +134,7 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 
 void set_irq_flags(unsigned int irq, unsigned int iflags)
 {
-	struct irqdesc *desc;
+	struct irq_desc *desc;
 	unsigned long flags;
 
 	if (irq >= NR_IRQS) {
@@ -171,7 +171,7 @@ void __init init_IRQ(void)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
 {
 	pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
 
@@ -190,7 +190,7 @@ void migrate_irqs(void)
 	unsigned int i, cpu = smp_processor_id();
 
 	for (i = 0; i < NR_IRQS; i++) {
-		struct irqdesc *desc = irq_desc + i;
+		struct irq_desc *desc = irq_desc + i;
 
 		if (desc->cpu == cpu) {
 			unsigned int newcpu = any_online_cpu(desc->affinity);

arch/arm/kernel/iwmmxt-notifier.c

@@ -1,63 +0,0 @@
-/*
- *  linux/arch/arm/kernel/iwmmxt-notifier.c
- *
- *  XScale iWMMXt (Concan) context switching and handling
- *
- *  Initial code:
- *  Copyright (c) 2003, Intel Corporation
- *
- *  Full lazy switching support, optimizations and more, by Nicolas Pitre
- *  Copyright (c) 2003-2004, MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/thread_notify.h>
-#include <asm/io.h>
-
-static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = t;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		/*
-		 * flush_thread() zeroes thread->fpstate, so no need
-		 * to do anything here.
-		 *
-		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
-		 * initialised state information on the first fault.
-		 */
-
-	case THREAD_NOTIFY_RELEASE:
-		iwmmxt_task_release(thread);
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		iwmmxt_task_switch(thread);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block iwmmxt_notifier_block = {
-	.notifier_call	= iwmmxt_do,
-};
-
-static int __init iwmmxt_init(void)
-{
-	thread_register_notifier(&iwmmxt_notifier_block);
-
-	return 0;
-}
-
-late_initcall(iwmmxt_init);

arch/arm/kernel/process.c

@@ -280,67 +280,6 @@ void show_fpregs(struct user_fp *regs)
 		(unsigned long)regs->fpcr);
 }
 
-/*
- * Task structure and kernel stack allocation.
- */
-struct thread_info_list {
-	unsigned long *head;
-	unsigned int nr;
-};
-
-static DEFINE_PER_CPU(struct thread_info_list, thread_info_list) = { NULL, 0 };
-
-#define EXTRA_TASK_STRUCT	4
-
-struct thread_info *alloc_thread_info(struct task_struct *task)
-{
-	struct thread_info *thread = NULL;
-
-	if (EXTRA_TASK_STRUCT) {
-		struct thread_info_list *th = &get_cpu_var(thread_info_list);
-		unsigned long *p = th->head;
-
-		if (p) {
-			th->head = (unsigned long *)p[0];
-			th->nr -= 1;
-		}
-		put_cpu_var(thread_info_list);
-
-		thread = (struct thread_info *)p;
-	}
-
-	if (!thread)
-		thread = (struct thread_info *)
-			   __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER);
-
-#ifdef CONFIG_DEBUG_STACK_USAGE
-	/*
-	 * The stack must be cleared if you want SYSRQ-T to
-	 * give sensible stack usage information
-	 */
-	if (thread)
-		memzero(thread, THREAD_SIZE);
-#endif
-	return thread;
-}
-
-void free_thread_info(struct thread_info *thread)
-{
-	if (EXTRA_TASK_STRUCT) {
-		struct thread_info_list *th = &get_cpu_var(thread_info_list);
-		if (th->nr < EXTRA_TASK_STRUCT) {
-			unsigned long *p = (unsigned long *)thread;
-			p[0] = (unsigned long)th->head;
-			th->head = p;
-			th->nr += 1;
-			put_cpu_var(thread_info_list);
-			return;
-		}
-		put_cpu_var(thread_info_list);
-	}
-	free_pages((unsigned long)thread, THREAD_SIZE_ORDER);
-}
-
 /*
  * Free current thread data structures etc..
  */

arch/arm/kernel/setup.c

@@ -357,9 +357,6 @@ static void __init setup_processor(void)
 #ifndef CONFIG_VFP
 	elf_hwcap &= ~HWCAP_VFP;
 #endif
-#ifndef CONFIG_IWMMXT
-	elf_hwcap &= ~HWCAP_IWMMXT;
-#endif
 
 	cpu_proc_init();
 }
@@ -441,16 +438,19 @@ __early_param("initrd=", early_initrd);
 
 static void __init arm_add_memory(unsigned long start, unsigned long size)
 {
+	struct membank *bank;
+
 	/*
 	 * Ensure that start/size are aligned to a page boundary.
 	 * Size is appropriately rounded down, start is rounded up.
 	 */
 	size -= start & ~PAGE_MASK;
 
-	meminfo.bank[meminfo.nr_banks].start = PAGE_ALIGN(start);
-	meminfo.bank[meminfo.nr_banks].size  = size & PAGE_MASK;
-	meminfo.bank[meminfo.nr_banks].node  = PHYS_TO_NID(start);
-	meminfo.nr_banks += 1;
+	bank = &meminfo.bank[meminfo.nr_banks++];
+
+	bank->start = PAGE_ALIGN(start);
+	bank->size  = size & PAGE_MASK;
+	bank->node  = PHYS_TO_NID(start);
 }
 
 /*

arch/arm/kernel/signal.c

@@ -12,6 +12,7 @@
 #include <linux/ptrace.h>
 #include <linux/personality.h>
 
+#include <asm/elf.h>
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>

arch/arm/kernel/traps.c

@@ -631,12 +631,9 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	notify_die("unknown data abort code", regs, &info, instr, 0);
 }
 
-void __attribute__((noreturn)) __bug(const char *file, int line, void *data)
+void __attribute__((noreturn)) __bug(const char *file, int line)
 {
-	printk(KERN_CRIT"kernel BUG at %s:%d!", file, line);
-	if (data)
-		printk(" - extra data = %p", data);
-	printk("\n");
+	printk(KERN_CRIT"kernel BUG at %s:%d!\n", file, line);
 	*(int *)0 = 0;
 
 	/* Avoid "noreturn function does return" */

arch/arm/kernel/xscale-cp0.c

@@ -0,0 +1,179 @@
+/*
+ * linux/arch/arm/kernel/xscale-cp0.c
+ *
+ * XScale DSP and iWMMXt coprocessor context switching and handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/thread_notify.h>
+#include <asm/io.h>
+
+static inline void dsp_save_state(u32 *state)
+{
+	__asm__ __volatile__ (
+		"mrrc	p0, 0, %0, %1, c0\n"
+		: "=r" (state[0]), "=r" (state[1]));
+}
+
+static inline void dsp_load_state(u32 *state)
+{
+	__asm__ __volatile__ (
+		"mcrr	p0, 0, %0, %1, c0\n"
+		: : "r" (state[0]), "r" (state[1]));
+}
+
+static int dsp_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+	struct thread_info *thread = t;
+
+	switch (cmd) {
+	case THREAD_NOTIFY_FLUSH:
+		thread->cpu_context.extra[0] = 0;
+		thread->cpu_context.extra[1] = 0;
+		break;
+
+	case THREAD_NOTIFY_SWITCH:
+		dsp_save_state(current_thread_info()->cpu_context.extra);
+		dsp_load_state(thread->cpu_context.extra);
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block dsp_notifier_block = {
+	.notifier_call	= dsp_do,
+};
+
+
+#ifdef CONFIG_IWMMXT
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+	struct thread_info *thread = t;
+
+	switch (cmd) {
+	case THREAD_NOTIFY_FLUSH:
+		/*
+		 * flush_thread() zeroes thread->fpstate, so no need
+		 * to do anything here.
+		 *
+		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
+		 * initialised state information on the first fault.
+		 */
+
+	case THREAD_NOTIFY_RELEASE:
+		iwmmxt_task_release(thread);
+		break;
+
+	case THREAD_NOTIFY_SWITCH:
+		iwmmxt_task_switch(thread);
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+	.notifier_call	= iwmmxt_do,
+};
+#endif
+
+
+static u32 __init xscale_cp_access_read(void)
+{
+	u32 value;
+
+	__asm__ __volatile__ (
+		"mrc	p15, 0, %0, c15, c1, 0\n\t"
+		: "=r" (value));
+
+	return value;
+}
+
+static void __init xscale_cp_access_write(u32 value)
+{
+	u32 temp;
+
+	__asm__ __volatile__ (
+		"mcr	p15, 0, %1, c15, c1, 0\n\t"
+		"mrc	p15, 0, %0, c15, c1, 0\n\t"
+		"mov	%0, %0\n\t"
+		"sub	pc, pc, #4\n\t"
+		: "=r" (temp) : "r" (value));
+}
+
+/*
+ * Detect whether we have a MAC coprocessor (40 bit register) or an
+ * iWMMXt coprocessor (64 bit registers) by loading 00000100:00000000
+ * into a coprocessor register and reading it back, and checking
+ * whether the upper word survived intact.
+ */
+static int __init cpu_has_iwmmxt(void)
+{
+	u32 lo;
+	u32 hi;
+
+	/*
+	 * This sequence is interpreted by the DSP coprocessor as:
+	 *	mar	acc0, %2, %3
+	 *	mra	%0, %1, acc0
+	 *
+	 * And by the iWMMXt coprocessor as:
+	 *	tmcrr	wR0, %2, %3
+	 *	tmrrc	%0, %1, wR0
+	 */
+	__asm__ __volatile__ (
+		"mcrr	p0, 0, %2, %3, c0\n"
+		"mrrc	p0, 0, %0, %1, c0\n"
+		: "=r" (lo), "=r" (hi)
+		: "r" (0), "r" (0x100));
+
+	return !!hi;
+}
+
+
+/*
+ * If we detect that the CPU has iWMMXt (and CONFIG_IWMMXT=y), we
+ * disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
+ * switch code handle iWMMXt context switching.  If on the other
+ * hand the CPU has a DSP coprocessor, we keep access to CP0 enabled
+ * all the time, and save/restore acc0 on context switch in non-lazy
+ * fashion.
+ */
+static int __init xscale_cp0_init(void)
+{
+	u32 cp_access;
+
+	cp_access = xscale_cp_access_read() & ~3;
+	xscale_cp_access_write(cp_access | 1);
+
+	if (cpu_has_iwmmxt()) {
+#ifndef CONFIG_IWMMXT
+		printk(KERN_WARNING "CAUTION: XScale iWMMXt coprocessor "
+			"detected, but kernel support is missing.\n");
+#else
+		printk(KERN_INFO "XScale iWMMXt coprocessor detected.\n");
+		elf_hwcap |= HWCAP_IWMMXT;
+		thread_register_notifier(&iwmmxt_notifier_block);
+#endif
+	} else {
+		printk(KERN_INFO "XScale DSP coprocessor detected.\n");
+		thread_register_notifier(&dsp_notifier_block);
+		cp_access |= 1;
+	}
+
+	xscale_cp_access_write(cp_access);
+
+	return 0;
+}
+
+late_initcall(xscale_cp0_init);

arch/arm/mach-aaec2000/core.c

@@ -82,7 +82,7 @@ static void aaec2000_int_unmask(unsigned int irq)
 	IRQ_INTENS |= (1 << irq);
 }
 
-static struct irqchip aaec2000_irq_chip = {
+static struct irq_chip aaec2000_irq_chip = {
 	.ack	= aaec2000_int_ack,
 	.mask	= aaec2000_int_mask,
 	.unmask	= aaec2000_int_unmask,
@@ -93,7 +93,7 @@ void __init aaec2000_init_irq(void)
 	unsigned int i;
 
 	for (i = 0; i < NR_IRQS; i++) {
-		set_irq_handler(i, do_level_IRQ);
+		set_irq_handler(i, handle_level_irq);
 		set_irq_chip(i, &aaec2000_irq_chip);
 		set_irq_flags(i, IRQF_VALID);
 	}

arch/arm/mach-at91rm9200/Kconfig

@@ -2,7 +2,8 @@ if ARCH_AT91
 
 menu "Atmel AT91 System-on-Chip"
 
-comment "Atmel AT91 Processors"
+choice
+	prompt "Atmel AT91 Processor"
 
 config ARCH_AT91RM9200
 	bool "AT91RM9200"
@@ -13,6 +14,8 @@ config ARCH_AT91SAM9260
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 
+endchoice
+
 # ----------------------------------------------------------
 
 if ARCH_AT91RM9200
@@ -33,7 +36,6 @@ config ARCH_AT91RM9200DK
 	  Select this if you are using Atmel's AT91RM9200-DK Development board.
 	  (Discontinued)
 
-
 config MACH_AT91RM9200EK
 	bool "Atmel AT91RM9200-EK Evaluation Kit"
 	depends on ARCH_AT91RM9200
@@ -90,6 +92,13 @@ if ARCH_AT91SAM9260
 
 comment "AT91SAM9260 Board Type"
 
+config MACH_AT91SAM9260EK
+	bool "Atmel AT91SAM9260-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
 endif
 
 # ----------------------------------------------------------
@@ -98,8 +107,31 @@ if ARCH_AT91SAM9261
 
 comment "AT91SAM9261 Board Type"
 
+config MACH_AT91SAM9261EK
+	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9261
+	help
+	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
 endif
 
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+	bool "Enable DataFlash Card support"
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+	help
+	  Enable support for the DataFlash card.
+
+config MTD_NAND_AT91_BUSWIDTH_16
+	bool "Enable 16-bit data bus interface to NAND flash"
+	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+	help
+	  On AT91SAM926x boards both types of NAND flash can be present
+	  (8 and 16 bit data bus width).
 
 # ----------------------------------------------------------
 

arch/arm/mach-at91rm9200/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y		:= clock.o irq.o gpio.o devices.o
+obj-y		:= clock.o irq.o gpio.o
 obj-m		:=
 obj-n		:=
 obj-		:=
@@ -10,11 +10,11 @@ obj-		:=
 obj-$(CONFIG_PM)		+= pm.o
 
 # CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+=
-obj-$(CONFIG_ARCH_AT91SAM9261)	+=
+obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
 
-# AT91RM9200 Board-specific support
+# AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
 obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
 obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
@@ -26,8 +26,10 @@ obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
 obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
 
 # AT91SAM9260 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
 
 # AT91SAM9261 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o

arch/arm/mach-at91rm9200/at91rm9200.c

@@ -14,8 +14,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/arch/at91rm9200.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_st.h>
 
-#include <asm/hardware.h>
 #include "generic.h"
 #include "clock.h"
 
@@ -25,33 +27,13 @@ static struct map_desc at91rm9200_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_SPI,
-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_SPI),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_EMAC,
 		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= AT91_VA_BASE_TWI,
-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_TWI),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_MCI,
-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_MCI),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_VA_BASE_UDP,
-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_UDP),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_SRAM_VIRT_BASE,
+		.virtual	= AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT91RM9200_SRAM_BASE),
 		.length		= AT91RM9200_SRAM_SIZE,
 		.type		= MT_DEVICE,
@@ -222,6 +204,16 @@ static struct at91_gpio_bank at91rm9200_gpio[] = {
 	}
 };
 
+static void at91rm9200_reset(void)
+{
+	/*
+	 * Perform a hardware reset with the use of the Watchdog timer.
+	 */
+	at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
+}
+
+
 /* --------------------------------------------------------------------
  *  AT91RM9200 processor initialization
  * -------------------------------------------------------------------- */
@@ -230,6 +222,12 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks
 	/* Map peripherals */
 	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
 
+	at91_arch_reset = at91rm9200_reset;
+	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
+			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
+			| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
+			| (1 << AT91RM9200_ID_IRQ6);
+
 	/* Init clock subsystem */
 	at91_clock_init(main_clock);
 

arch/arm/mach-at91rm9200/devices.c → arch/arm/mach-at91rm9200/at91rm9200_devices.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/devices.c
+ * arch/arm/mach-at91rm9200/at91rm9200_devices.c
  *
  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
  *  Copyright (C) 2005 David Brownell
@@ -15,9 +15,10 @@
 
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200.h>
+#include <asm/arch/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -33,7 +34,7 @@
 static u64 ohci_dmamask = 0xffffffffUL;
 static struct at91_usbh_data usbh_data;
 
-static struct resource at91_usbh_resources[] = {
+static struct resource usbh_resources[] = {
 	[0] = {
 		.start	= AT91RM9200_UHP_BASE,
 		.end	= AT91RM9200_UHP_BASE + SZ_1M - 1,
@@ -54,8 +55,8 @@ static struct platform_device at91rm9200_usbh_device = {
 				.coherent_dma_mask	= 0xffffffff,
 				.platform_data		= &usbh_data,
 	},
-	.resource	= at91_usbh_resources,
-	.num_resources	= ARRAY_SIZE(at91_usbh_resources),
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
 };
 
 void __init at91_add_device_usbh(struct at91_usbh_data *data)
@@ -78,7 +79,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 #ifdef CONFIG_USB_GADGET_AT91
 static struct at91_udc_data udc_data;
 
-static struct resource at91_udc_resources[] = {
+static struct resource udc_resources[] = {
 	[0] = {
 		.start	= AT91RM9200_BASE_UDP,
 		.end	= AT91RM9200_BASE_UDP + SZ_16K - 1,
@@ -97,8 +98,8 @@ static struct platform_device at91rm9200_udc_device = {
 	.dev		= {
 				.platform_data		= &udc_data,
 	},
-	.resource	= at91_udc_resources,
-	.num_resources	= ARRAY_SIZE(at91_udc_resources),
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
 };
 
 void __init at91_add_device_udc(struct at91_udc_data *data)
@@ -129,7 +130,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 static u64 eth_dmamask = 0xffffffffUL;
 static struct at91_eth_data eth_data;
 
-static struct resource at91_eth_resources[] = {
+static struct resource eth_resources[] = {
 	[0] = {
 		.start	= AT91_VA_BASE_EMAC,
 		.end	= AT91_VA_BASE_EMAC + SZ_16K - 1,
@@ -150,8 +151,8 @@ static struct platform_device at91rm9200_eth_device = {
 				.coherent_dma_mask	= 0xffffffff,
 				.platform_data		= &eth_data,
 	},
-	.resource	= at91_eth_resources,
-	.num_resources	= ARRAY_SIZE(at91_eth_resources),
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
 void __init at91_add_device_eth(struct at91_eth_data *data)
@@ -202,11 +203,13 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
 #if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
 static struct at91_cf_data cf_data;
 
-static struct resource at91_cf_resources[] = {
+#define CF_BASE		AT91_CHIPSELECT_4
+
+static struct resource cf_resources[] = {
 	[0] = {
-		.start	= AT91_CF_BASE,
+		.start	= CF_BASE,
 		/* ties up CS4, CS5 and CS6 */
-		.end	= AT91_CF_BASE + (0x30000000 - 1),
+		.end	= CF_BASE + (0x30000000 - 1),
 		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
 	},
 };
@@ -217,15 +220,38 @@ static struct platform_device at91rm9200_cf_device = {
 	.dev		= {
 				.platform_data		= &cf_data,
 	},
-	.resource	= at91_cf_resources,
-	.num_resources	= ARRAY_SIZE(at91_cf_resources),
+	.resource	= cf_resources,
+	.num_resources	= ARRAY_SIZE(cf_resources),
 };
 
 void __init at91_add_device_cf(struct at91_cf_data *data)
 {
+	unsigned int csa;
+
 	if (!data)
 		return;
 
+	data->chipselect = 4;		/* can only use EBI ChipSelect 4 */
+
+	/* CF takes over CS4, CS5, CS6 */
+	csa = at91_sys_read(AT91_EBI_CSA);
+	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
+
+	/*
+	 * Static memory controller timing adjustments.
+	 * REVISIT:  these timings are in terms of MCK cycles, so
+	 * when MCK changes (cpufreq etc) so must these values...
+	 */
+	at91_sys_write(AT91_SMC_CSR(4),
+				  AT91_SMC_ACSS_STD
+				| AT91_SMC_DBW_16
+				| AT91_SMC_BAT
+				| AT91_SMC_WSEN
+				| AT91_SMC_NWS_(32)	/* wait states */
+				| AT91_SMC_RWSETUP_(6)	/* setup time */
+				| AT91_SMC_RWHOLD_(4)	/* hold time */
+	);
+
 	/* input/irq */
 	if (data->irq_pin) {
 		at91_set_gpio_input(data->irq_pin, 1);
@@ -245,6 +271,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	at91_set_A_periph(AT91_PIN_PC11, 0);	/* NCS5/CFCE1 */
 	at91_set_A_periph(AT91_PIN_PC12, 0);	/* NCS6/CFCE2 */
 
+	/* nWAIT is _not_ a default setting */
+	at91_set_A_periph(AT91_PIN_PC6, 1);	/*  nWAIT */
+
 	cf_data = *data;
 	platform_device_register(&at91rm9200_cf_device);
 }
@@ -257,11 +286,11 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91RM9200) || defined(CONFIG_MMC_AT91RM9200_MODULE)
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
 static u64 mmc_dmamask = 0xffffffffUL;
 static struct at91_mmc_data mmc_data;
 
-static struct resource at91_mmc_resources[] = {
+static struct resource mmc_resources[] = {
 	[0] = {
 		.start	= AT91RM9200_BASE_MCI,
 		.end	= AT91RM9200_BASE_MCI + SZ_16K - 1,
@@ -282,8 +311,8 @@ static struct platform_device at91rm9200_mmc_device = {
 				.coherent_dma_mask	= 0xffffffff,
 				.platform_data		= &mmc_data,
 	},
-	.resource	= at91_mmc_resources,
-	.num_resources	= ARRAY_SIZE(at91_mmc_resources),
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
 void __init at91_add_device_mmc(struct at91_mmc_data *data)
@@ -298,31 +327,33 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	}
 	if (data->wp_pin)
 		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
 
 	/* CLK */
 	at91_set_A_periph(AT91_PIN_PA27, 0);
 
-	if (data->is_b) {
+	if (data->slot_b) {
 		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA8, 0);
+		at91_set_B_periph(AT91_PIN_PA8, 1);
 
 		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA9, 0);
+		at91_set_B_periph(AT91_PIN_PA9, 1);
 		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA10, 0);
-			at91_set_B_periph(AT91_PIN_PA11, 0);
-			at91_set_B_periph(AT91_PIN_PA12, 0);
+			at91_set_B_periph(AT91_PIN_PA10, 1);
+			at91_set_B_periph(AT91_PIN_PA11, 1);
+			at91_set_B_periph(AT91_PIN_PA12, 1);
 		}
 	} else {
 		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA28, 0);
+		at91_set_A_periph(AT91_PIN_PA28, 1);
 
 		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA29, 0);
+		at91_set_A_periph(AT91_PIN_PA29, 1);
 		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PB3, 0);
-			at91_set_B_periph(AT91_PIN_PB4, 0);
-			at91_set_B_periph(AT91_PIN_PB5, 0);
+			at91_set_B_periph(AT91_PIN_PB3, 1);
+			at91_set_B_periph(AT91_PIN_PB4, 1);
+			at91_set_B_periph(AT91_PIN_PB5, 1);
 		}
 	}
 
@@ -341,29 +372,45 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
 static struct at91_nand_data nand_data;
 
-static struct resource at91_nand_resources[] = {
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
 	{
-		.start	= AT91_SMARTMEDIA_BASE,
-		.end	= AT91_SMARTMEDIA_BASE + SZ_8M - 1,
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_8M - 1,
 		.flags	= IORESOURCE_MEM,
 	}
 };
 
-static struct platform_device at91_nand_device = {
+static struct platform_device at91rm9200_nand_device = {
 	.name		= "at91_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
 	},
-	.resource	= at91_nand_resources,
-	.num_resources	= ARRAY_SIZE(at91_nand_resources),
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
 void __init at91_add_device_nand(struct at91_nand_data *data)
 {
+	unsigned int csa;
+
 	if (!data)
 		return;
 
+	/* enable the address range of CS3 */
+	csa = at91_sys_read(AT91_EBI_CSA);
+	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
+		| AT91_SMC_NWS_(5)
+		| AT91_SMC_TDF_(1)
+		| AT91_SMC_RWSETUP_(0)	/* tDS Data Set up Time 30 - ns */
+		| AT91_SMC_RWHOLD_(1)	/* tDH Data Hold Time 20 - ns */
+	);
+
 	/* enable pin */
 	if (data->enable_pin)
 		at91_set_gpio_output(data->enable_pin, 1);
@@ -380,7 +427,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_set_A_periph(AT91_PIN_PC3, 0);		/* SMWE */
 
 	nand_data = *data;
-	platform_device_register(&at91_nand_device);
+	platform_device_register(&at91rm9200_nand_device);
 }
 #else
 void __init at91_add_device_nand(struct at91_nand_data *data) {}
@@ -392,10 +439,25 @@ void __init at91_add_device_nand(struct at91_nand_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_TWI,
+		.end	= AT91RM9200_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_TWI,
+		.end	= AT91RM9200_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device at91rm9200_twi_device = {
 	.name		= "at91_i2c",
 	.id		= -1,
-	.num_resources	= 0,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
 };
 
 void __init at91_add_device_i2c(void)
@@ -421,7 +483,7 @@ void __init at91_add_device_i2c(void) {}
 #if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
 static u64 spi_dmamask = 0xffffffffUL;
 
-static struct resource at91_spi_resources[] = {
+static struct resource spi_resources[] = {
 	[0] = {
 		.start	= AT91RM9200_BASE_SPI,
 		.end	= AT91RM9200_BASE_SPI + SZ_16K - 1,
@@ -438,14 +500,14 @@ static struct platform_device at91rm9200_spi_device = {
 	.name		= "at91_spi",
 	.id		= 0,
 	.dev		= {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
 	},
-	.resource	= at91_spi_resources,
-	.num_resources	= ARRAY_SIZE(at91_spi_resources),
+	.resource	= spi_resources,
+	.num_resources	= ARRAY_SIZE(spi_resources),
 };
 
-static const unsigned at91_spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
 
 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 {
@@ -461,7 +523,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		if (devices[i].controller_data)
 			cs_pin = (unsigned long) devices[i].controller_data;
 		else
-			cs_pin = at91_spi_standard_cs[devices[i].chip_select];
+			cs_pin = spi_standard_cs[devices[i].chip_select];
 
 #ifdef CONFIG_SPI_AT91_MANUAL_CS
 		at91_set_gpio_output(cs_pin, 1);
@@ -474,7 +536,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 	}
 
 	spi_register_board_info(devices, nr_devices);
-	at91_clock_associate("spi0_clk", &at91rm9200_spi_device.dev, "spi");
+	at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi");
 	platform_device_register(&at91rm9200_spi_device);
 }
 #else
@@ -486,7 +548,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
  *  RTC
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_RTC_DRV_AT91) || defined(CONFIG_RTC_DRV_AT91_MODULE)
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
 static struct platform_device at91rm9200_rtc_device = {
 	.name		= "at91_rtc",
 	.id		= -1,
@@ -506,7 +568,7 @@ static void __init at91_add_device_rtc(void) {}
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91_WATCHDOG) || defined(CONFIG_AT91_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
 static struct platform_device at91rm9200_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91rm9200/at91rm9200_time.c

@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include <asm/mach/time.h>
 
+#include <asm/arch/at91_st.h>
+
 static unsigned long last_crtr;
 
 /*
@@ -99,6 +101,9 @@ void at91rm9200_timer_reset(void)
 	/* Set Period Interval timer */
 	at91_sys_write(AT91_ST_PIMR, LATCH);
 
+	/* Clear any pending interrupts */
+	(void) at91_sys_read(AT91_ST_SR);
+
 	/* Enable Period Interval Timer interrupt */
 	at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
 }

arch/arm/mach-at91rm9200/at91sam9260.c

@@ -0,0 +1,294 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9260.c
+ *
+ *  Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91_pmc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9260_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
+		.length		= AT91SAM9260_SRAM0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
+		.length		= AT91SAM9260_SRAM1_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+	.name		= "adc_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_ADC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+	.name		= "ether_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart4_clk = {
+	.name		= "usart4_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart5_clk = {
+	.name		= "usart5_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&adc_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc_clk,
+	&udc_clk,
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc
+	// tc0 .. tc2
+	&ohci_clk,
+	&ether_clk,
+	&isi_clk,
+	&usart3_clk,
+	&usart4_clk,
+	&usart5_clk,
+	// tc3 .. tc5
+	// irq0 .. irq2
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9260_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9260_gpio[] = {
+	{
+		.id		= AT91SAM9260_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9260_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9260_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}
+};
+
+static void at91sam9260_reset(void)
+{
+#warning "Implement CPU reset"
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9260 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9260_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
+
+	at91_arch_reset = at91sam9260_reset;
+	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
+			| (1 << AT91SAM9260_ID_IRQ2);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9260_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9260_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C */
+	0,	/* Analog-to-Digital Converter */
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface */
+	4,	/* USB Device Port */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller */
+	0,
+	0,
+	0,	/* Timer Counter 0 */
+	0,	/* Timer Counter 1 */
+	0,	/* Timer Counter 2 */
+	3,	/* USB Host port */
+	3,	/* Ethernet */
+	0,	/* Image Sensor Interface */
+	6,	/* USART 3 */
+	6,	/* USART 4 */
+	6,	/* USART 5 */
+	0,	/* Timer Counter 3 */
+	0,	/* Timer Counter 4 */
+	0,	/* Timer Counter 5 */
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+};
+
+void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9260_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}

arch/arm/mach-at91rm9200/at91sam9260_devices.c

@@ -0,0 +1,866 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9260_devices.c
+ *
+ *  Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_UHP_BASE,
+		.end	= AT91SAM9260_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_UHP,
+		.end	= AT91SAM9260_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	if (!data)
+		return;
+
+	usbh_data = *data;
+	platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_UDP,
+		.end	= AT91SAM9260_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_UDP,
+		.end	= AT91SAM9260_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	udc_data = *data;
+	platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct eth_platform_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_EMAC,
+		.end	= AT91SAM9260_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_EMAC,
+		.end	= AT91SAM9260_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct eth_platform_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA21, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9260_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct eth_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_MCI,
+		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_MCI,
+		.end	= AT91SAM9260_ID_MCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_mmc_device = {
+	.name		= "at91_mci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc_data,
+	},
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* CLK */
+	at91_set_A_periph(AT91_PIN_PA8, 0);
+
+	if (data->slot_b) {
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA0, 1);
+		if (data->wire4) {
+			at91_set_B_periph(AT91_PIN_PA5, 1);
+			at91_set_B_periph(AT91_PIN_PA4, 1);
+			at91_set_B_periph(AT91_PIN_PA3, 1);
+		}
+	} else {
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA7, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA6, 1);
+		if (data->wire4) {
+			at91_set_A_periph(AT91_PIN_PA9, 1);
+			at91_set_A_periph(AT91_PIN_PA10, 1);
+			at91_set_A_periph(AT91_PIN_PA11, 1);
+		}
+	}
+
+	mmc_data = *data;
+	platform_device_register(&at91sam9260_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_8M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9260_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9260_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_TWI,
+		.end	= AT91SAM9260_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_TWI,
+		.end	= AT91SAM9260_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+	platform_device_register(&at91sam9260_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_SPI0,
+		.end	= AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_SPI0,
+		.end	= AT91SAM9260_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_SPI1,
+		.end	= AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_SPI1,
+		.end	= AT91SAM9260_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9260_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9260_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9260_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB15, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US0,
+		.end	= AT91SAM9260_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US0,
+		.end	= AT91SAM9260_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PB26, 0);		/* RTS0 */
+	at91_set_A_periph(AT91_PIN_PB27, 0);		/* CTS0 */
+	at91_set_A_periph(AT91_PIN_PB24, 0);		/* DTR0 */
+	at91_set_A_periph(AT91_PIN_PB22, 0);		/* DSR0 */
+	at91_set_A_periph(AT91_PIN_PB23, 0);		/* DCD0 */
+	at91_set_A_periph(AT91_PIN_PB25, 0);		/* RI0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US1,
+		.end	= AT91SAM9260_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US1,
+		.end	= AT91SAM9260_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
+	at91_set_A_periph(AT91_PIN_PB28, 0);		/* RTS1 */
+	at91_set_A_periph(AT91_PIN_PB29, 0);		/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US2,
+		.end	= AT91SAM9260_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US2,
+		.end	= AT91SAM9260_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
+}
+
+static struct resource uart3_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US3,
+		.end	= AT91SAM9260_BASE_US3 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US3,
+		.end	= AT91SAM9260_ID_US3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart3_device = {
+	.name		= "atmel_usart",
+	.id		= 4,
+	.dev		= {
+				.platform_data	= &uart3_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart3_resources,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB10, 1);		/* TXD3 */
+	at91_set_A_periph(AT91_PIN_PB11, 0);		/* RXD3 */
+}
+
+static struct resource uart4_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US4,
+		.end	= AT91SAM9260_BASE_US4 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US4,
+		.end	= AT91SAM9260_ID_US4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart4_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart4_device = {
+	.name		= "atmel_usart",
+	.id		= 5,
+	.dev		= {
+				.platform_data	= &uart4_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart4_resources,
+	.num_resources	= ARRAY_SIZE(uart4_resources),
+};
+
+static inline void configure_usart4_pins(void)
+{
+	at91_set_B_periph(AT91_PIN_PA31, 1);		/* TXD4 */
+	at91_set_B_periph(AT91_PIN_PA30, 0);		/* RXD4 */
+}
+
+static struct resource uart5_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_US5,
+		.end	= AT91SAM9260_BASE_US5 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_US5,
+		.end	= AT91SAM9260_ID_US5,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart5_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9260_uart5_device = {
+	.name		= "atmel_usart",
+	.id		= 6,
+	.dev		= {
+				.platform_data	= &uart5_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart5_resources,
+	.num_resources	= ARRAY_SIZE(uart5_resources),
+};
+
+static inline void configure_usart5_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB12, 1);		/* TXD5 */
+	at91_set_A_periph(AT91_PIN_PB13, 0);		/* RXD5 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91sam9260_uart0_device;
+				at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91sam9260_uart1_device;
+				at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91sam9260_uart2_device;
+				at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_usart3_pins();
+				at91_uarts[i] = &at91sam9260_uart3_device;
+				at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
+				break;
+			case 4:
+				configure_usart4_pins();
+				at91_uarts[i] = &at91sam9260_uart4_device;
+				at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
+				break;
+			case 5:
+				configure_usart5_pins();
+				at91_uarts[i] = &at91sam9260_uart5_device;
+				at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
+				break;
+			case 6:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91sam9260_dbgu_device;
+				at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);

arch/arm/mach-at91rm9200/at91sam9261.c

@@ -0,0 +1,289 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9261.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9261_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
+		.length		= AT91SAM9261_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc_clk,
+	&udc_clk,
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc 0 .. ssc2
+	// tc0 .. tc2
+	&ohci_clk,
+	&lcdc_clk,
+	// irq0 .. irq2
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+/* HClocks */
+static struct clk hck0 = {
+	.name		= "hck0",
+	.pmc_mask	= AT91_PMC_HCK0,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 0,
+};
+static struct clk hck1 = {
+	.name		= "hck1",
+	.pmc_mask	= AT91_PMC_HCK1,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 1,
+};
+
+static void __init at91sam9261_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+
+	clk_register(&hck0);
+	clk_register(&hck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9261_gpio[] = {
+	{
+		.id		= AT91SAM9261_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9261_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9261_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}
+};
+
+static void at91sam9261_reset(void)
+{
+#warning "Implement CPU reset"
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9261 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9261_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
+
+	at91_arch_reset = at91sam9261_reset;
+	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
+			| (1 << AT91SAM9261_ID_IRQ2);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9261_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9261_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C */
+	0,
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface */
+	4,	/* USB Device Port */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	5,	/* Serial Synchronous Controller 2 */
+	0,	/* Timer Counter 0 */
+	0,	/* Timer Counter 1 */
+	0,	/* Timer Counter 2 */
+	3,	/* USB Host port */
+	3,	/* LCD Controller */
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+};
+
+void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9261_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}

arch/arm/mach-at91rm9200/at91sam9261_devices.c

@@ -0,0 +1,741 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9261_devices.c
+ *
+ *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *  Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_UHP_BASE,
+		.end	= AT91SAM9261_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_UHP,
+		.end	= AT91SAM9261_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	if (!data)
+		return;
+
+	usbh_data = *data;
+	platform_device_register(&at91sam9261_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_UDP,
+		.end	= AT91SAM9261_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_UDP,
+		.end	= AT91SAM9261_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	unsigned long x;
+
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally */
+	x = at91_sys_read(AT91_MATRIX_USBPUCR);
+	at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
+
+	udc_data = *data;
+	platform_device_register(&at91sam9261_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_MCI,
+		.end	= AT91SAM9261_BASE_MCI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_MCI,
+		.end	= AT91SAM9261_ID_MCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_mmc_device = {
+	.name		= "at91_mci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc_data,
+	},
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* CLK */
+	at91_set_B_periph(AT91_PIN_PA2, 0);
+
+	/* CMD */
+	at91_set_B_periph(AT91_PIN_PA1, 1);
+
+	/* DAT0, maybe DAT1..DAT3 */
+	at91_set_B_periph(AT91_PIN_PA0, 1);
+	if (data->wire4) {
+		at91_set_B_periph(AT91_PIN_PA4, 1);
+		at91_set_B_periph(AT91_PIN_PA5, 1);
+		at91_set_B_periph(AT91_PIN_PA6, 1);
+	}
+
+	mmc_data = *data;
+	platform_device_register(&at91sam9261_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	at91_set_A_periph(AT91_PIN_PC0, 0);		/* NANDOE */
+	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
+
+	nand_data = *data;
+	platform_device_register(&at91_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_TWI,
+		.end	= AT91SAM9261_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_TWI,
+		.end	= AT91SAM9261_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PA7, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PA7, 1);
+
+	at91_set_A_periph(AT91_PIN_PA8, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PA8, 1);
+
+	platform_device_register(&at91sam9261_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_SPI0,
+		.end	= AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_SPI0,
+		.end	= AT91SAM9261_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_SPI1,
+		.end	= AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_SPI1,
+		.end	= AT91SAM9261_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9261_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB30, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB31, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB29, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9261_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
+static u64 lcdc_dmamask = 0xffffffffUL;
+static struct at91fb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_LCDC_BASE,
+		.end	= AT91SAM9261_LCDC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_LCDC,
+		.end	= AT91SAM9261_ID_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+#if defined(CONFIG_FB_INTSRAM)
+	[2] = {
+		.start	= AT91SAM9261_SRAM_BASE,
+		.end	= AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device at91_lcdc_device = {
+	.name		= "at91-fb",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &lcdc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &lcdc_data,
+	},
+	.resource	= lcdc_resources,
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct at91fb_info *data)
+{
+	if (!data) {
+		return;
+	}
+
+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PB3, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PB4, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PB7, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PB8, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PB10, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PB11, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PB12, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PB15, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PB16, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PB17, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PB19, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PB20, 0);	/* LCDD15 */
+	at91_set_B_periph(AT91_PIN_PB23, 0);	/* LCDD18 */
+	at91_set_B_periph(AT91_PIN_PB24, 0);	/* LCDD19 */
+	at91_set_B_periph(AT91_PIN_PB25, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PB26, 0);	/* LCDD21 */
+	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
+	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
+
+	lcdc_data = *data;
+	platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct at91fb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9261_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA9, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PA10, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_US0,
+		.end	= AT91SAM9261_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_US0,
+		.end	= AT91SAM9261_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9261_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC8, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PC9, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);		/* RTS0 */
+	at91_set_A_periph(AT91_PIN_PC11, 0);		/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_US1,
+		.end	= AT91SAM9261_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_US1,
+		.end	= AT91SAM9261_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9261_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC12, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PC13, 0);		/* RXD1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_US2,
+		.end	= AT91SAM9261_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_US2,
+		.end	= AT91SAM9261_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9261_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC15, 0);		/* RXD2 */
+	at91_set_A_periph(AT91_PIN_PC14, 1);		/* TXD2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91sam9261_uart0_device;
+				at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91sam9261_uart1_device;
+				at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91sam9261_uart2_device;
+				at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91sam9261_dbgu_device;
+				at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);

arch/arm/mach-at91rm9200/at91sam926x_time.c

@@ -0,0 +1,114 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
+ *
+ * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
+ * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/at91_pit.h>
+
+
+#define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
+#define PIT_PICNT(x)	(((x) & AT91_PIT_PICNT) >> 20)
+
+/*
+ * Returns number of microseconds since last timer interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeofday()
+ *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ *  'tick' is usecs per jiffy (linux/timex.h).
+ */
+static unsigned long at91sam926x_gettimeoffset(void)
+{
+	unsigned long elapsed;
+	unsigned long t = at91_sys_read(AT91_PIT_PIIR);
+
+	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
+
+	return (unsigned long)(elapsed * 1000000) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
+{
+	volatile long nr_ticks;
+
+	if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) {	/* This is a shared interrupt */
+		write_seqlock(&xtime_lock);
+
+		/* Get number to ticks performed before interrupt and clear PIT interrupt */
+		nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
+		do {
+			timer_tick();
+			nr_ticks--;
+		} while (nr_ticks);
+
+		write_sequnlock(&xtime_lock);
+		return IRQ_HANDLED;
+	} else
+		return IRQ_NONE;		/* not handled */
+}
+
+static struct irqaction at91sam926x_timer_irq = {
+	.name		= "at91_tick",
+	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
+	.handler	= at91sam926x_timer_interrupt
+};
+
+void at91sam926x_timer_reset(void)
+{
+	/* Disable timer */
+	at91_sys_write(AT91_PIT_MR, 0);
+
+	/* Clear any pending interrupts */
+	(void) at91_sys_read(AT91_PIT_PIVR);
+
+	/* Set Period Interval timer and enable its interrupt */
+	at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
+}
+
+/*
+ * Set up timer interrupt.
+ */
+void __init at91sam926x_timer_init(void)
+{
+	/* Initialize and enable the timer */
+	at91sam926x_timer_reset();
+
+	/* Make IRQs happen for the system timer. */
+	setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
+}
+
+#ifdef CONFIG_PM
+static void at91sam926x_timer_suspend(void)
+{
+	/* Disable timer */
+	at91_sys_write(AT91_PIT_MR, 0);
+}
+#else
+#define at91sam926x_timer_suspend	NULL
+#endif
+
+struct sys_timer at91sam926x_timer = {
+	.init		= at91sam926x_timer_init,
+	.offset		= at91sam926x_gettimeoffset,
+	.suspend	= at91sam926x_timer_suspend,
+	.resume		= at91sam926x_timer_reset,
+};
+

arch/arm/mach-at91rm9200/board-carmeva.c

@@ -65,7 +65,6 @@ static void __init carmeva_init_irq(void)
 	at91rm9200_init_interrupts(NULL);
 }
 
-
 static struct at91_eth_data __initdata carmeva_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
@@ -89,8 +88,33 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 // };
 
 static struct at91_mmc_data __initdata carmeva_mmc_data = {
-	.is_b		= 0,
+	.slot_b		= 0,
 	.wire4		= 1,
+	.det_pin	= AT91_PIN_PB10,
+	.wp_pin		= AT91_PIN_PC14,
+};
+
+static struct spi_board_info carmeva_spi_devices[] = {
+	{ /* DataFlash chip */
+		.modalias = "mtd_dataflash",
+		.chip_select  = 0,
+		.max_speed_hz = 10 * 1000 * 1000,
+	},
+	{ /* User accessable spi - cs1 (250KHz) */
+		.modalias = "spi-cs1",
+		.chip_select  = 1,
+		.max_speed_hz = 250 *  1000,
+	},
+	{ /* User accessable spi - cs2 (1MHz) */
+		.modalias = "spi-cs2",
+		.chip_select  = 2,
+		.max_speed_hz = 1 * 1000 *  1000,
+	},
+	{ /* User accessable spi - cs3 (10MHz) */
+		.modalias = "spi-cs3",
+		.chip_select  = 3,
+		.max_speed_hz = 10 * 1000 *  1000,
+	},
 };
 
 static void __init carmeva_board_init(void)
@@ -105,10 +129,10 @@ static void __init carmeva_board_init(void)
 	at91_add_device_udc(&carmeva_udc_data);
 	/* I2C */
 	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
-	/* SPI */
-//	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	at91_add_device_mmc(&carmeva_mmc_data);
 }

arch/arm/mach-at91rm9200/board-csb337.c

@@ -99,7 +99,7 @@ static struct at91_cf_data __initdata csb337_cf_data = {
 
 static struct at91_mmc_data __initdata csb337_mmc_data = {
 	.det_pin	= AT91_PIN_PD5,
-	.is_b		= 0,
+	.slot_b		= 0,
 	.wire4		= 1,
 	.wp_pin		= AT91_PIN_PD6,
 };

arch/arm/mach-at91rm9200/board-dk.c

@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -39,6 +40,7 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -93,7 +95,7 @@ static struct at91_cf_data __initdata dk_cf_data = {
 };
 
 static struct at91_mmc_data __initdata dk_mmc_data = {
-	.is_b		= 0,
+	.slot_b		= 0,
 	.wire4		= 1,
 };
 
@@ -145,6 +147,30 @@ static struct at91_nand_data __initdata dk_nand_data = {
 	.partition_info	= nand_partitions,
 };
 
+#define DK_FLASH_BASE	AT91_CHIPSELECT_0
+#define DK_FLASH_SIZE	0x200000
+
+static struct physmap_flash_data dk_flash_data = {
+	.width	= 2,
+};
+
+static struct resource dk_flash_resource = {
+	.start		= DK_FLASH_BASE,
+	.end		= DK_FLASH_BASE + DK_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device dk_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dk_flash_data,
+			},
+	.resource	= &dk_flash_resource,
+	.num_resources	= 1,
+};
+
+
 static void __init dk_board_init(void)
 {
 	/* Serial */
@@ -172,6 +198,8 @@ static void __init dk_board_init(void)
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);
+	/* NOR Flash */
+	platform_device_register(&dk_flash);
 	/* VGA */
 //	dk_add_device_video();
 }

arch/arm/mach-at91rm9200/board-eb9200.c

@@ -87,7 +87,7 @@ static struct at91_cf_data __initdata eb9200_cf_data = {
 };
 
 static struct at91_mmc_data __initdata eb9200_mmc_data = {
-	.is_b		= 0,
+	.slot_b		= 0,
 	.wire4		= 1,
 };
 

arch/arm/mach-at91rm9200/board-ek.c

@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -39,6 +40,7 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -87,7 +89,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
 
 static struct at91_mmc_data __initdata ek_mmc_data = {
 	.det_pin	= AT91_PIN_PB27,
-	.is_b		= 0,
+	.slot_b		= 0,
 	.wire4		= 1,
 	.wp_pin		= AT91_PIN_PA17,
 };
@@ -107,6 +109,30 @@ static struct spi_board_info ek_spi_devices[] = {
 #endif
 };
 
+#define EK_FLASH_BASE	AT91_CHIPSELECT_0
+#define EK_FLASH_SIZE	0x200000
+
+static struct physmap_flash_data ek_flash_data = {
+	.width	= 2,
+};
+
+static struct resource ek_flash_resource = {
+	.start		= EK_FLASH_BASE,
+	.end		= EK_FLASH_BASE + EK_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ek_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &ek_flash_data,
+			},
+	.resource	= &ek_flash_resource,
+	.num_resources	= 1,
+};
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -130,6 +156,8 @@ static void __init ek_board_init(void)
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
 	at91_add_device_mmc(&ek_mmc_data);
 #endif
+	/* NOR Flash */
+	platform_device_register(&ek_flash);
 	/* VGA */
 //	ek_add_device_video();
 }

arch/arm/mach-at91rm9200/board-kb9202.c

@@ -84,7 +84,7 @@ static struct at91_udc_data __initdata kb9202_udc_data = {
 
 static struct at91_mmc_data __initdata kb9202_mmc_data = {
 	.det_pin	= AT91_PIN_PB2,
-	.is_b		= 0,
+	.slot_b		= 0,
 	.wire4		= 1,
 };
 

arch/arm/mach-at91rm9200/board-sam9260ek.c

@@ -0,0 +1,201 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 5 = USART0 .. USART5
+ *    6      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 3,
+	.tty_map	= { 6, 0, 1, -1, -1, -1, -1 }	/* ttyS0, ..., ttyS6 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+#endif
+#if defined(CONFIG_SND_AT73C213)
+	{	/* AT73C213 DAC */
+		.modalias	= "snd_at73c213",
+		.chip_select	= 0,
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 1,
+	},
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct __initdata eth_platform_data ek_macb_data = {
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 256 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 256 * 1024,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.slot_b		= 1,
+	.wire4		= 1,
+//	.det_pin	= ... not connected
+//	.wp_pin		= ... not connected
+//	.vcc_pin	= ... not connected
+};
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* MMC */
+	at91_add_device_mmc(&ek_mmc_data);
+}
+
+MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END

arch/arm/mach-at91rm9200/board-sam9261ek.c

@@ -0,0 +1,259 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/dm9000.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 2 = USART0 .. USART2
+ *    3      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 1,
+	.tty_map	= { 3, -1, -1, -1 }		/* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9261_initialize(18432000);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9261_init_interrupts(NULL);
+}
+
+
+/*
+ * DM9000 ethernet device
+ */
+#if defined(CONFIG_DM9000)
+static struct resource at91sam9261_dm9000_resource[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_2,
+		.end	= AT91_CHIPSELECT_2 + 3,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= AT91_CHIPSELECT_2 + 0x44,
+		.end	= AT91_CHIPSELECT_2 + 0xFF,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= AT91_PIN_PC11,
+		.end	= AT91_PIN_PC11,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device at91sam9261_dm9000_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(at91sam9261_dm9000_resource),
+	.resource	= at91sam9261_dm9000_resource,
+	.dev		= {
+		.platform_data	= &dm9000_platdata,
+	}
+};
+
+static void __init ek_add_device_dm9000(void)
+{
+	/*
+	 * Configure Chip-Select 2 on SMC for the DM9000.
+	 * Note: These timings were calculated for MASTER_CLOCK = 100000000
+	 *  according to the DM9000 timings.
+	 */
+	at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
+	at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+	at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+
+	/* Configure Reset signal as output */
+	at91_set_gpio_output(AT91_PIN_PC10, 0);
+
+	/* Configure Interrupt pin as input, no pull-up */
+	at91_set_gpio_input(AT91_PIN_PC11, 0);
+
+	platform_device_register(&at91sam9261_dm9000_device);
+}
+#else
+static void __init ek_add_device_dm9000(void) {}
+#endif /* CONFIG_DM9000 */
+
+
+/*
+ * USB Host Port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+
+/*
+ * USB Device Port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PB29,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+//	.det_pin	= ... not connected
+//	.wp_pin		= ... not connected
+//	.vcc_pin	= ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 256 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 256 * 1024 ,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 22,
+	.cle		= 21,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PC15,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info ek_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 3,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#elif defined(CONFIG_SND_AT73C213)
+	{	/* AT73C213 DAC */
+		.modalias	= "snd_at73c213",
+		.chip_select	= 3,
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* DM9000 ethernet */
+	ek_add_device_dm9000();
+
+	/* spi0 and mmc/sd share the same PIO pins */
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+#else
+	/* MMC */
+	at91_add_device_mmc(&ek_mmc_data);
+#endif
+}
+
+MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END

arch/arm/mach-at91rm9200/clock.c

@@ -28,6 +28,8 @@
 #include <asm/mach-types.h>
 
 #include <asm/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/cpu.h>
 
 #include "clock.h"
 
@@ -41,6 +43,7 @@
 #define clk_is_primary(x)	((x)->type & CLK_TYPE_PRIMARY)
 #define clk_is_programmable(x)	((x)->type & CLK_TYPE_PROGRAMMABLE)
 #define clk_is_peripheral(x)	((x)->type & CLK_TYPE_PERIPHERAL)
+#define clk_is_sys(x)		((x)->type & CLK_TYPE_SYSTEM)
 
 
 static LIST_HEAD(clocks);
@@ -114,13 +117,11 @@ static void pmc_sys_mode(struct clk *clk, int is_on)
 static struct clk udpck = {
 	.name		= "udpck",
 	.parent		= &pllb,
-	.pmc_mask	= AT91_PMC_UDP,
 	.mode		= pmc_sys_mode,
 };
 static struct clk uhpck = {
 	.name		= "uhpck",
 	.parent		= &pllb,
-	.pmc_mask	= AT91_PMC_UHP,
 	.mode		= pmc_sys_mode,
 };
 
@@ -434,6 +435,12 @@ int __init clk_register(struct clk *clk)
 		clk->mode = pmc_periph_mode;
 		list_add_tail(&clk->node, &clocks);
 	}
+	else if (clk_is_sys(clk)) {
+		clk->parent = &mck;
+		clk->mode = pmc_sys_mode;
+
+		list_add_tail(&clk->node, &clocks);
+	}
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
 	else if (clk_is_programmable(clk)) {
 		clk->mode = pmc_sys_mode;
@@ -586,9 +593,21 @@ int __init at91_clock_init(unsigned long main_clock)
 	 */
 	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
 	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP);
+	if (cpu_is_at91rm9200()) {
+		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+		udpck.pmc_mask = AT91RM9200_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
+		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+	} else if (cpu_is_at91sam9260()) {
+		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
+	} else if (cpu_is_at91sam9261()) {
+		uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
+		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
+	}
 	at91_sys_write(AT91_CKGR_PLLBR, 0);
-	at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP);
 
 	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);

arch/arm/mach-at91rm9200/clock.h

@@ -10,6 +10,7 @@
 #define CLK_TYPE_PLL		0x2
 #define CLK_TYPE_PROGRAMMABLE	0x4
 #define CLK_TYPE_PERIPHERAL	0x8
+#define CLK_TYPE_SYSTEM		0x10
 
 
 struct clk {

arch/arm/mach-at91rm9200/generic.h

@@ -10,14 +10,19 @@
 
  /* Processors */
 extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+extern void __init at91sam9260_initialize(unsigned long main_clock);
+extern void __init at91sam9261_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
 struct sys_timer;
 extern struct sys_timer at91rm9200_timer;
+extern struct sys_timer at91sam926x_timer;
 
  /* Clocks */
 extern int __init at91_clock_init(unsigned long main_clock);
@@ -39,3 +44,6 @@ struct at91_gpio_bank {
 };
 extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
 extern void __init at91_gpio_irq_setup(void);
+
+extern void (*at91_arch_reset)(void);
+extern int at91_extern_irq;

arch/arm/mach-at91rm9200/gpio.c

@@ -19,6 +19,8 @@
 
 #include <asm/io.h>
 #include <asm/hardware.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
@@ -332,10 +334,10 @@ static struct irq_chip gpio_irqchip = {
 	.set_wake	= gpio_irq_set_wake,
 };
 
-static void gpio_irq_handler(unsigned irq, struct irqdesc *desc)
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
 	unsigned	pin;
-	struct irqdesc	*gpio;
+	struct irq_desc	*gpio;
 	void __iomem	*pio;
 	u32		isr;
 
@@ -396,7 +398,7 @@ void __init at91_gpio_irq_setup(void)
 		__raw_writel(~0, controller + PIO_IDR);
 
 		set_irq_data(id, (void *) pin);
-		set_irq_chipdata(id, controller);
+		set_irq_chip_data(id, controller);
 
 		for (i = 0; i < 32; i++, pin++) {
 			/*
@@ -404,7 +406,7 @@ void __init at91_gpio_irq_setup(void)
 			 * shorter, and the AIC handles interupts sanely.
 			 */
 			set_irq_chip(pin, &gpio_irqchip);
-			set_irq_handler(pin, do_simple_IRQ);
+			set_irq_handler(pin, handle_simple_irq);
 			set_irq_flags(pin, IRQF_VALID);
 		}
 

arch/arm/mach-at91rm9200/irq.c

@@ -47,6 +47,10 @@ static void at91_aic_unmask_irq(unsigned int irq)
 	at91_sys_write(AT91_AIC_IECR, 1 << irq);
 }
 
+unsigned int at91_extern_irq;
+
+#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
+
 static int at91_aic_set_type(unsigned irq, unsigned type)
 {
 	unsigned int smr, srctype;
@@ -59,14 +63,16 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
 	case IRQT_LOW:
-		if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0))	/* only supported on external interrupts */
+		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
+			srctype = AT91_AIC_SRCTYPE_LOW;
+		else
 			return -EINVAL;
-		srctype = AT91_AIC_SRCTYPE_LOW;
 		break;
 	case IRQT_FALLING:
-		if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0))	/* only supported on external interrupts */
+		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
+			srctype = AT91_AIC_SRCTYPE_FALLING;
+		else
 			return -EINVAL;
-		srctype = AT91_AIC_SRCTYPE_FALLING;
 		break;
 	default:
 		return -EINVAL;
@@ -139,7 +145,7 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
 		at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
 
 		set_irq_chip(i, &at91_aic_chip);
-		set_irq_handler(i, do_level_IRQ);
+		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 
 		/* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */

arch/arm/mach-at91rm9200/pm.c

@@ -26,7 +26,10 @@
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
 
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91rm9200_mc.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
 
 #include "generic.h"
 
@@ -68,9 +71,15 @@ static int at91_pm_verify_clocks(void)
 	scsr = at91_sys_read(AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
-	if ((scsr & (AT91_PMC_UHP | AT91_PMC_UDP)) != 0) {
-		pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
-		return 0;
+	if (cpu_is_at91rm9200()) {
+		if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
+			pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+			return 0;
+		}
+	} else if (cpu_is_at91sam9260()) {
+#warning "Check SAM9260 USB clocks"
+	} else if (cpu_is_at91sam9261()) {
+#warning "Check SAM9261 USB clocks"
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
@@ -112,7 +121,6 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 static void (*slow_clock)(void);
 
 
-
 static int at91_pm_enter(suspend_state_t state)
 {
 	at91_gpio_suspend();
@@ -123,13 +131,7 @@ static int at91_pm_enter(suspend_state_t state)
 			(at91_sys_read(AT91_PMC_PCSR)
 					| (1 << AT91_ID_FIQ)
 					| (1 << AT91_ID_SYS)
-					| (1 << AT91RM9200_ID_IRQ0)
-					| (1 << AT91RM9200_ID_IRQ1)
-					| (1 << AT91RM9200_ID_IRQ2)
-					| (1 << AT91RM9200_ID_IRQ3)
-					| (1 << AT91RM9200_ID_IRQ4)
-					| (1 << AT91RM9200_ID_IRQ5)
-					| (1 << AT91RM9200_ID_IRQ6))
+					| (at91_extern_irq))
 				& at91_sys_read(AT91_AIC_IMR),
 			state);
 

arch/arm/mach-clps711x/irq.c

@@ -63,7 +63,7 @@ static void int1_unmask(unsigned int irq)
 	clps_writel(intmr1, INTMR1);
 }
 
-static struct irqchip int1_chip = {
+static struct irq_chip int1_chip = {
 	.ack	= int1_ack,
 	.mask	= int1_mask,
 	.unmask = int1_unmask,
@@ -100,7 +100,7 @@ static void int2_unmask(unsigned int irq)
 	clps_writel(intmr2, INTMR2);
 }
 
-static struct irqchip int2_chip = {
+static struct irq_chip int2_chip = {
 	.ack	= int2_ack,
 	.mask	= int2_mask,
 	.unmask = int2_unmask,
@@ -112,12 +112,12 @@ void __init clps711x_init_irq(void)
 
 	for (i = 0; i < NR_IRQS; i++) {
 	        if (INT1_IRQS & (1 << i)) {
-	        	set_irq_handler(i, do_level_IRQ);
+	        	set_irq_handler(i, handle_level_irq);
 	        	set_irq_chip(i, &int1_chip);
 	        	set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 		}
 		if (INT2_IRQS & (1 << i)) {
-			set_irq_handler(i, do_level_IRQ);
+			set_irq_handler(i, handle_level_irq);
 			set_irq_chip(i, &int2_chip);
 			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 		}			

arch/arm/mach-clps7500/core.c

@@ -57,7 +57,7 @@ static void cl7500_unmask_irq_a(unsigned int irq)
 	iomd_writeb(val | mask, IOMD_IRQMASKA);
 }
 
-static struct irqchip clps7500_a_chip = {
+static struct irq_chip clps7500_a_chip = {
 	.ack	= cl7500_ack_irq_a,
 	.mask	= cl7500_mask_irq_a,
 	.unmask	= cl7500_unmask_irq_a,
@@ -81,7 +81,7 @@ static void cl7500_unmask_irq_b(unsigned int irq)
 	iomd_writeb(val | mask, IOMD_IRQMASKB);
 }
 
-static struct irqchip clps7500_b_chip = {
+static struct irq_chip clps7500_b_chip = {
 	.ack	= cl7500_mask_irq_b,
 	.mask	= cl7500_mask_irq_b,
 	.unmask	= cl7500_unmask_irq_b,
@@ -105,7 +105,7 @@ static void cl7500_unmask_irq_c(unsigned int irq)
 	iomd_writeb(val | mask, IOMD_IRQMASKC);
 }
 
-static struct irqchip clps7500_c_chip = {
+static struct irq_chip clps7500_c_chip = {
 	.ack	= cl7500_mask_irq_c,
 	.mask	= cl7500_mask_irq_c,
 	.unmask	= cl7500_unmask_irq_c,
@@ -129,7 +129,7 @@ static void cl7500_unmask_irq_d(unsigned int irq)
 	iomd_writeb(val | mask, IOMD_IRQMASKD);
 }
 
-static struct irqchip clps7500_d_chip = {
+static struct irq_chip clps7500_d_chip = {
 	.ack	= cl7500_mask_irq_d,
 	.mask	= cl7500_mask_irq_d,
 	.unmask	= cl7500_unmask_irq_d,
@@ -153,7 +153,7 @@ static void cl7500_unmask_irq_dma(unsigned int irq)
 	iomd_writeb(val | mask, IOMD_DMAMASK);
 }
 
-static struct irqchip clps7500_dma_chip = {
+static struct irq_chip clps7500_dma_chip = {
 	.ack	= cl7500_mask_irq_dma,
 	.mask	= cl7500_mask_irq_dma,
 	.unmask	= cl7500_unmask_irq_dma,
@@ -177,7 +177,7 @@ static void cl7500_unmask_irq_fiq(unsigned int irq)
 	iomd_writeb(val | mask, IOMD_FIQMASK);
 }
 
-static struct irqchip clps7500_fiq_chip = {
+static struct irq_chip clps7500_fiq_chip = {
 	.ack	= cl7500_mask_irq_fiq,
 	.mask	= cl7500_mask_irq_fiq,
 	.unmask	= cl7500_unmask_irq_fiq,
@@ -187,7 +187,7 @@ static void cl7500_no_action(unsigned int irq)
 {
 }
 
-static struct irqchip clps7500_no_chip = {
+static struct irq_chip clps7500_no_chip = {
 	.ack	= cl7500_no_action,
 	.mask	= cl7500_no_action,
 	.unmask	= cl7500_no_action,
@@ -214,43 +214,43 @@ static void __init clps7500_init_irq(void)
 		switch (irq) {
 		case 0 ... 7:
 			set_irq_chip(irq, &clps7500_a_chip);
-			set_irq_handler(irq, do_level_IRQ);
+			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, flags);
 			break;
 
 		case 8 ... 15:
 			set_irq_chip(irq, &clps7500_b_chip);
-			set_irq_handler(irq, do_level_IRQ);
+			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, flags);
 			break;
 
 		case 16 ... 22:
 			set_irq_chip(irq, &clps7500_dma_chip);
-			set_irq_handler(irq, do_level_IRQ);
+			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, flags);
 			break;
 
 		case 24 ... 31:
 			set_irq_chip(irq, &clps7500_c_chip);
-			set_irq_handler(irq, do_level_IRQ);
+			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, flags);
 			break;
 
 		case 40 ... 47:
 			set_irq_chip(irq, &clps7500_d_chip);
-			set_irq_handler(irq, do_level_IRQ);
+			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, flags);
 			break;
 
 		case 48 ... 55:
 			set_irq_chip(irq, &clps7500_no_chip);
-			set_irq_handler(irq, do_level_IRQ);
+			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, flags);
 			break;
 
 		case 64 ... 72:
 			set_irq_chip(irq, &clps7500_fiq_chip);
-			set_irq_handler(irq, do_level_IRQ);
+			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, flags);
 			break;
 		}

arch/arm/mach-ebsa110/core.c

@@ -45,7 +45,7 @@ static void ebsa110_unmask_irq(unsigned int irq)
 	__raw_writeb(1 << irq, IRQ_MSET);
 }
 
-static struct irqchip ebsa110_irq_chip = {
+static struct irq_chip ebsa110_irq_chip = {
 	.ack	= ebsa110_mask_irq,
 	.mask	= ebsa110_mask_irq,
 	.unmask = ebsa110_unmask_irq,
@@ -67,7 +67,7 @@ static void __init ebsa110_init_irq(void)
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		set_irq_chip(irq, &ebsa110_irq_chip);
-		set_irq_handler(irq, do_level_IRQ);
+		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 }

arch/arm/mach-ep93xx/Kconfig

@@ -9,12 +9,24 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
+config MACH_ADSSPHERE
+	bool "Support ADS Sphere"
+	help
+	  Say 'Y' here if you want your kernel to support the ADS
+	  Sphere board.
+
 config MACH_EDB9302
 	bool "Support Cirrus Logic EDB9302"
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302 Evaluation Board.
 
+config MACH_EDB9302A
+	bool "Support Cirrus Logic EDB9302A"
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9302A Evaluation Board.
+
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
 	help

arch/arm/mach-ep93xx/Makefile

@@ -6,7 +6,9 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
+obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
 obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
+obj-$(CONFIG_MACH_EDB9302A)	+= edb9302a.o
 obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
 obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
 obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o

arch/arm/mach-ep93xx/adssphere.c

@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-ep93xx/adssphere.c
+ * ADS Sphere support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data adssphere_flash_data = {
+	.width		= 4,
+};
+
+static struct resource adssphere_flash_resource = {
+	.start		= 0x60000000,
+	.end		= 0x61ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device adssphere_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &adssphere_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &adssphere_flash_resource,
+};
+
+static struct ep93xx_eth_data adssphere_eth_data = {
+	.phy_id		= 1,
+};
+
+static struct resource adssphere_eth_resource[] = {
+	{
+		.start	= EP93XX_ETHERNET_PHYS_BASE,
+		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_EP93XX_ETHERNET,
+		.end	= IRQ_EP93XX_ETHERNET,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device adssphere_eth_device = {
+	.name		= "ep93xx-eth",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &adssphere_eth_data,
+	},
+	.num_resources	= 2,
+	.resource	= adssphere_eth_resource,
+};
+
+static void __init adssphere_init_machine(void)
+{
+	ep93xx_init_devices();
+	platform_device_register(&adssphere_flash);
+
+	memcpy(adssphere_eth_data.dev_addr,
+		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+	platform_device_register(&adssphere_eth_device);
+}
+
+MACHINE_START(ADSSPHERE, "ADS Sphere board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= adssphere_init_machine,
+MACHINE_END

arch/arm/mach-ep93xx/core.c

@@ -245,7 +245,7 @@ EXPORT_SYMBOL(gpio_line_set);
  * EP93xx IRQ handling
  *************************************************************************/
 static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
-		struct irqdesc *desc)
+		struct irq_desc *desc)
 {
 	unsigned char status;
 	int i;
@@ -335,7 +335,7 @@ static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
 	return 0;
 }
 
-static struct irqchip ep93xx_gpio_ab_irq_chip = {
+static struct irq_chip ep93xx_gpio_ab_irq_chip = {
 	.ack		= ep93xx_gpio_ab_irq_mask_ack,
 	.mask		= ep93xx_gpio_ab_irq_mask,
 	.unmask		= ep93xx_gpio_ab_irq_unmask,
@@ -352,7 +352,7 @@ void __init ep93xx_init_irq(void)
 
 	for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
 		set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
-		set_irq_handler(irq, do_level_IRQ);
+		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}
 	set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);

arch/arm/mach-ep93xx/edb9302a.c

@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-ep93xx/edb9302a.c
+ * Cirrus Logic EDB9302A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9302a_flash_data = {
+	.width		= 2,
+};
+
+static struct resource edb9302a_flash_resource = {
+	.start		= 0x60000000,
+	.end		= 0x60ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb9302a_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb9302a_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb9302a_flash_resource,
+};
+
+static struct ep93xx_eth_data edb9302a_eth_data = {
+	.phy_id			= 1,
+};
+
+static struct resource edb9302a_eth_resource[] = {
+	{
+		.start	= EP93XX_ETHERNET_PHYS_BASE,
+		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_EP93XX_ETHERNET,
+		.end	= IRQ_EP93XX_ETHERNET,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device edb9302a_eth_device = {
+	.name		= "ep93xx-eth",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &edb9302a_eth_data,
+	},
+	.num_resources	= 2,
+	.resource	= edb9302a_eth_resource,
+};
+
+static void __init edb9302a_init_machine(void)
+{
+	ep93xx_init_devices();
+	platform_device_register(&edb9302a_flash);
+
+	memcpy(edb9302a_eth_data.dev_addr,
+		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+	platform_device_register(&edb9302a_eth_device);
+}
+
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb9302a_init_machine,
+MACHINE_END

arch/arm/mach-footbridge/common.c

@@ -78,7 +78,7 @@ static void fb_unmask_irq(unsigned int irq)
 	*CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(irq)];
 }
 
-static struct irqchip fb_chip = {
+static struct irq_chip fb_chip = {
 	.ack	= fb_mask_irq,
 	.mask	= fb_mask_irq,
 	.unmask = fb_unmask_irq,
@@ -96,7 +96,7 @@ static void __init __fb_init_irq(void)
 
 	for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) {
 		set_irq_chip(irq, &fb_chip);
-		set_irq_handler(irq, do_level_IRQ);
+		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 }