[media] V4L doc fixes

The xmlto validation produced a number of errors that are now fixed.
Sadly, the DocBook/Makefile still adds --skip-validation to xmlto, so
these errors are missed during a normal compile.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Documentation/DocBook/v4l/dev-subdev.xml

@@ -23,9 +23,9 @@
   driver and the V4L2 device driver support this, sub-devices will feature a
   character device node on which ioctls can be called to
   <itemizedlist>
-    <listitem>query, read and write sub-devices controls</listitem>
-    <listitem>subscribe and unsubscribe to events and retrieve them</listitem>
-    <listitem>negotiate image formats on individual pads</listitem>
+    <listitem><para>query, read and write sub-devices controls</para></listitem>
+    <listitem><para>subscribe and unsubscribe to events and retrieve them</para></listitem>
+    <listitem><para>negotiate image formats on individual pads</para></listitem>
   </itemizedlist>
   </para>
 
@@ -67,14 +67,14 @@
   <section id="pad-level-formats">
     <title>Pad-level Formats</title>
 
-    <warning>Pad-level formats are only applicable to very complex device that
+    <warning><para>Pad-level formats are only applicable to very complex device that
     need to expose low-level format configuration to user space. Generic V4L2
     applications do <emphasis>not</emphasis> need to use the API described in
-    this section.</warning>
+    this section.</para></warning>
 
-    <note>For the purpose of this section, the term
+    <note><para>For the purpose of this section, the term
     <wordasword>format</wordasword> means the combination of media bus data
-    format, frame width and frame height.</note>
+    format, frame width and frame height.</para></note>
 
     <para>Image formats are typically negotiated on video capture and output
     devices using the <link linkend="crop">cropping and scaling</link> ioctls.
@@ -84,8 +84,8 @@
 
     <para>For complex devices, such as often found in embedded systems,
     identical image sizes at the output of a pipeline can be achieved using
-    different hardware configurations. One such exemple is shown on
-    <xref linkend="pipeline-scaling" xrefstyle="template: Figure %n" />, where
+    different hardware configurations. One such example is shown on
+    <xref linkend="pipeline-scaling" />, where
     image scaling can be performed on both the video sensor and the host image
     processing hardware.</para>
 
@@ -168,13 +168,13 @@
       modify formats as required by the device. However, they should comply with
       the following rules when possible:
       <itemizedlist>
-        <listitem>Formats should be propagated from sink pads to source pads.
+        <listitem><para>Formats should be propagated from sink pads to source pads.
 	Modifying a format on a source pad should not modify the format on any
-	sink pad.</listitem>
-        <listitem>Sub-devices that scale frames using variable scaling factors
+	sink pad.</para></listitem>
+        <listitem><para>Sub-devices that scale frames using variable scaling factors
 	should reset the scale factors to default values when sink pads formats
 	are modified. If the 1:1 scaling ratio is supported, this means that
-	source pads formats should be reset to the sink pads formats.</listitem>
+	source pads formats should be reset to the sink pads formats.</para></listitem>
       </itemizedlist>
       </para>
 
@@ -185,9 +185,9 @@
       guaranteed to be compatible. Drivers are free to accept different formats
       matching device requirements as being compatible.</para>
 
-      <para><xref linkend="sample-pipeline-config" xrefstyle="template:Table %n"/>
+      <para><xref linkend="sample-pipeline-config" />
       shows a sample configuration sequence for the pipeline described in
-      <xref linkend="pipeline-scaling" xrefstyle="template:Figure %n"/> (table
+      <xref linkend="pipeline-scaling" /> (table
       columns list entity names and pad numbers).</para>
 
       <table pgwide="0" frame="none" id="sample-pipeline-config">
@@ -248,19 +248,19 @@
 
       <para>
       <orderedlist>
-	<listitem>Initial state. The sensor output is set to its native 3MP
+	<listitem><para>Initial state. The sensor output is set to its native 3MP
 	resolution. Resolutions on the host frontend and scaler input and output
-	pads are undefined.</listitem>
-	<listitem>The application configures the frontend input pad resolution to
+	pads are undefined.</para></listitem>
+	<listitem><para>The application configures the frontend input pad resolution to
 	2048x1536. The driver propagates the format to the frontend output pad.
 	Note that the propagated output format can be different, as in this case,
 	than the input format, as the hardware might need to crop pixels (for
-	instance when converting a Bayer filter pattern to RGB or YUV).</listitem>
-	<listitem>The application configures the scaler input pad resolution to
+	instance when converting a Bayer filter pattern to RGB or YUV).</para></listitem>
+	<listitem><para>The application configures the scaler input pad resolution to
 	2046x1534 to match the frontend output resolution. The driver propagates
-	the format to the scaler output pad.</listitem>
-	<listitem>The application configures the scaler output pad resolution to
-	1280x960.</listitem>
+	the format to the scaler output pad.</para></listitem>
+	<listitem><para>The application configures the scaler output pad resolution to
+	1280x960.</para></listitem>
       </orderedlist>
       </para>
 

Documentation/DocBook/v4l/media-ioc-enum-entities.xml

@@ -63,9 +63,9 @@
     <structfield>group_id</structfield> value are considered as logically
     grouped. Groups are used to report
     <itemizedlist>
-      <listitem>ALSA, VBI and video nodes that carry the same media
-      stream</listitem>
-      <listitem>lens and flash controllers associated with a sensor</listitem>
+      <listitem><para>ALSA, VBI and video nodes that carry the same media
+      stream</para></listitem>
+      <listitem><para>lens and flash controllers associated with a sensor</para></listitem>
     </itemizedlist>
     </para>
 

Documentation/DocBook/v4l/subdev-formats.xml

@@ -63,22 +63,22 @@
       <para>Those formats transfer pixel data as red, green and blue components.
       The format code is made of the following information.
       <itemizedlist>
-	<listitem>The red, green and blue components order code, as encoded in a
-	pixel sample. Possible values are RGB and BGR.</listitem>
-	<listitem>The number of bits per component, for each component. The values
-	can be different for all components. Common values are 555 and 565.
+	<listitem><para>The red, green and blue components order code, as encoded in a
+	pixel sample. Possible values are RGB and BGR.</para></listitem>
+	<listitem><para>The number of bits per component, for each component. The values
+	can be different for all components. Common values are 555 and 565.</para>
 	</listitem>
-	<listitem>The number of bus samples per pixel. Pixels that are wider than
+	<listitem><para>The number of bus samples per pixel. Pixels that are wider than
 	the bus width must be transferred in multiple samples. Common values are
-	1 and 2.</listitem>
-	<listitem>The bus width.</listitem>
-	<listitem>For formats where the total number of bits per pixel is smaller
+	1 and 2.</para></listitem>
+	<listitem><para>The bus width.</para></listitem>
+	<listitem><para>For formats where the total number of bits per pixel is smaller
 	than the number of bus samples per pixel times the bus width, a padding
 	value stating if the bytes are padded in their most high order bits
-	(PADHI) or low order bits (PADLO).</listitem>
-	<listitem>For formats where the number of bus samples per pixel is larger
+	(PADHI) or low order bits (PADLO).</para></listitem>
+	<listitem><para>For formats where the number of bus samples per pixel is larger
 	than 1, an endianness value stating if the pixel is transferred MSB first
-	(BE) or LSB first (LE).</listitem>
+	(BE) or LSB first (LE).</para></listitem>
       </itemizedlist>
       </para>
 
@@ -347,26 +347,26 @@
       <para>Those formats transfer pixel data as red, green and blue components.
       The format code is made of the following information.
       <itemizedlist>
-	<listitem>The red, green and blue components order code, as encoded in a
+	<listitem><para>The red, green and blue components order code, as encoded in a
 	pixel sample. The possible values are shown in <xref
-	linkend="bayer-patterns" />.</listitem>
-	<listitem>The number of bits per pixel component. All components are
-	transferred on the same number of bits. Common values are 8, 10 and 12.
+	linkend="bayer-patterns" />.</para></listitem>
+	<listitem><para>The number of bits per pixel component. All components are
+	transferred on the same number of bits. Common values are 8, 10 and 12.</para>
 	</listitem>
-	<listitem>If the pixel components are DPCM-compressed, a mention of the
-	DPCM compression and the number of bits per compressed pixel component.
+	<listitem><para>If the pixel components are DPCM-compressed, a mention of the
+	DPCM compression and the number of bits per compressed pixel component.</para>
 	</listitem>
-	<listitem>The number of bus samples per pixel. Pixels that are wider than
+	<listitem><para>The number of bus samples per pixel. Pixels that are wider than
 	the bus width must be transferred in multiple samples. Common values are
-	1 and 2.</listitem>
-	<listitem>The bus width.</listitem>
-	<listitem>For formats where the total number of bits per pixel is smaller
+	1 and 2.</para></listitem>
+	<listitem><para>The bus width.</para></listitem>
+	<listitem><para>For formats where the total number of bits per pixel is smaller
 	than the number of bus samples per pixel times the bus width, a padding
 	value stating if the bytes are padded in their most high order bits
-	(PADHI) or low order bits (PADLO).</listitem>
-	<listitem>For formats where the number of bus samples per pixel is larger
+	(PADHI) or low order bits (PADLO).</para></listitem>
+	<listitem><para>For formats where the number of bus samples per pixel is larger
 	than 1, an endianness value stating if the pixel is transferred MSB first
-	(BE) or LSB first (LE).</listitem>
+	(BE) or LSB first (LE).</para></listitem>
       </itemizedlist>
       </para>
 
@@ -824,19 +824,19 @@
       <para>Those data formats transfer pixel data as (possibly downsampled) Y, U
       and V components. The format code is made of the following information.
       <itemizedlist>
-	<listitem>The Y, U and V components order code, as transferred on the
-	bus. Possible values are YUYV, UYVY, YVYU and VYUY.</listitem>
-	<listitem>The number of bits per pixel component. All components are
-	transferred on the same number of bits. Common values are 8, 10 and 12.
+	<listitem><para>The Y, U and V components order code, as transferred on the
+	bus. Possible values are YUYV, UYVY, YVYU and VYUY.</para></listitem>
+	<listitem><para>The number of bits per pixel component. All components are
+	transferred on the same number of bits. Common values are 8, 10 and 12.</para>
 	</listitem>
-	<listitem>The number of bus samples per pixel. Pixels that are wider than
+	<listitem><para>The number of bus samples per pixel. Pixels that are wider than
 	the bus width must be transferred in multiple samples. Common values are
-	1, 1.5 (encoded as 1_5) and 2.</listitem>
-	<listitem>The bus width. When the bus width is larger than the number of
+	1, 1.5 (encoded as 1_5) and 2.</para></listitem>
+	<listitem><para>The bus width. When the bus width is larger than the number of
 	bits per pixel component, several components are packed in a single bus
 	sample. The components are ordered as specified by the order code, with
 	components on the left of the code transferred in the high order bits.
-	Common values are 8 and 16.
+	Common values are 8 and 16.</para>
 	</listitem>
       </itemizedlist>
       </para>