nozomi: fix initialization and early flow control access

Due to some flaws in the initialization and flow control
code kernel oopses could be triggered e.g. when accessing
the card too early after insertion.
See e.g. kernel.org bug #10077.
The main part of the fix is a trivial state management
making sure the card is realy ready to use before allowing
any access.

Signed-off-by: Frank Seidel <fseidel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/char/nozomi.c

@@ -190,6 +190,14 @@ enum card_type {
 	F32_8 = 8192,	/* 3072 bytes downl. + 1024 bytes uplink * 2 -> 8192 */
 };
 
+/* Initialization states a card can be in */
+enum card_state {
+	NOZOMI_STATE_UKNOWN	= 0,
+	NOZOMI_STATE_ENABLED	= 1,	/* pci device enabled */
+	NOZOMI_STATE_ALLOCATED	= 2,	/* config setup done */
+	NOZOMI_STATE_READY	= 3,	/* flowcontrols received */
+};
+
 /* Two different toggle channels exist */
 enum channel_type {
 	CH_A = 0,
@@ -385,6 +393,7 @@ struct nozomi {
 	spinlock_t spin_mutex;	/* secures access to registers and tty */
 
 	unsigned int index_start;
+	enum card_state state;
 	u32 open_ttys;
 };
 
@@ -686,6 +695,7 @@ static int nozomi_read_config_table(struct nozomi *dc)
 		dc->last_ier = dc->last_ier | CTRL_DL;
 		writew(dc->last_ier, dc->reg_ier);
 
+		dc->state = NOZOMI_STATE_ALLOCATED;
 		dev_info(&dc->pdev->dev, "Initialization OK!\n");
 		return 1;
 	}
@@ -944,6 +954,14 @@ static int receive_flow_control(struct nozomi *dc)
 	case CTRL_APP2:
 		port = PORT_APP2;
 		enable_ier = APP2_DL;
+		if (dc->state == NOZOMI_STATE_ALLOCATED) {
+			/*
+			 * After card initialization the flow control
+			 * received for APP2 is always the last
+			 */
+			dc->state = NOZOMI_STATE_READY;
+			dev_info(&dc->pdev->dev, "Device READY!\n");
+		}
 		break;
 	default:
 		dev_err(&dc->pdev->dev,
@@ -1366,22 +1384,12 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
 
 	dc->pdev = pdev;
 
-	/* Find out what card type it is */
-	nozomi_get_card_type(dc);
-
 	ret = pci_enable_device(dc->pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to enable PCI Device\n");
 		goto err_free;
 	}
 
-	start = pci_resource_start(dc->pdev, 0);
-	if (start == 0) {
-		dev_err(&pdev->dev, "No I/O address for card detected\n");
-		ret = -ENODEV;
-		goto err_disable_device;
-	}
-
 	ret = pci_request_regions(dc->pdev, NOZOMI_NAME);
 	if (ret) {
 		dev_err(&pdev->dev, "I/O address 0x%04x already in use\n",
@@ -1389,6 +1397,16 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
 		goto err_disable_device;
 	}
 
+	start = pci_resource_start(dc->pdev, 0);
+	if (start == 0) {
+		dev_err(&pdev->dev, "No I/O address for card detected\n");
+		ret = -ENODEV;
+		goto err_rel_regs;
+	}
+
+	/* Find out what card type it is */
+	nozomi_get_card_type(dc);
+
 	dc->base_addr = ioremap(start, dc->card_type);
 	if (!dc->base_addr) {
 		dev_err(&pdev->dev, "Unable to map card MMIO\n");
@@ -1425,6 +1443,14 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
 	dc->index_start = ndev_idx * MAX_PORT;
 	ndevs[ndev_idx] = dc;
 
+	pci_set_drvdata(pdev, dc);
+
+	/* Enable RESET interrupt */
+	dc->last_ier = RESET;
+	iowrite16(dc->last_ier, dc->reg_ier);
+
+	dc->state = NOZOMI_STATE_ENABLED;
+
 	for (i = 0; i < MAX_PORT; i++) {
 		mutex_init(&dc->port[i].tty_sem);
 		dc->port[i].tty_open_count = 0;
@@ -1433,12 +1459,6 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
 							&pdev->dev);
 	}
 
-	/* Enable  RESET interrupt. */
-	dc->last_ier = RESET;
-	writew(dc->last_ier, dc->reg_ier);
-
-	pci_set_drvdata(pdev, dc);
-
 	return 0;
 
 err_free_sbuf:
@@ -1553,7 +1573,7 @@ static int ntty_open(struct tty_struct *tty, struct file *file)
 	struct nozomi *dc = get_dc_by_tty(tty);
 	unsigned long flags;
 
-	if (!port || !dc)
+	if (!port || !dc || dc->state != NOZOMI_STATE_READY)
 		return -ENODEV;
 
 	if (mutex_lock_interruptible(&port->tty_sem))
@@ -1716,6 +1736,10 @@ static int ntty_tiocmget(struct tty_struct *tty, struct file *file)
 static int ntty_tiocmset(struct tty_struct *tty, struct file *file,
 	unsigned int set, unsigned int clear)
 {
+	struct nozomi *dc = get_dc_by_tty(tty);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dc->spin_mutex, flags);
 	if (set & TIOCM_RTS)
 		set_rts(tty, 1);
 	else if (clear & TIOCM_RTS)
@@ -1725,6 +1749,7 @@ static int ntty_tiocmset(struct tty_struct *tty, struct file *file,
 		set_dtr(tty, 1);
 	else if (clear & TIOCM_DTR)
 		set_dtr(tty, 0);
+	spin_unlock_irqrestore(&dc->spin_mutex, flags);
 
 	return 0;
 }
@@ -1762,7 +1787,7 @@ static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp)
 	icount.brk = cnow.brk;
 	icount.buf_overrun = cnow.buf_overrun;
 
-	return copy_to_user(argp, &icount, sizeof(icount));
+	return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0;
 }
 
 static int ntty_ioctl(struct tty_struct *tty, struct file *file,