ARM: restart: mxc: use new restart hook

Hook these platforms restart code into the new restart hook rather
than using arch_reset().

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-imx/mach-apf9328.c

@@ -139,4 +139,5 @@ MACHINE_START(APF9328, "Armadeus APF9328")
 	.handle_irq   = imx1_handle_irq,
 	.timer        = &apf9328_timer,
 	.init_machine = apf9328_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-armadillo5x0.c

@@ -561,4 +561,5 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.handle_irq = imx31_handle_irq,
 	.timer = &armadillo5x0_timer,
 	.init_machine = armadillo5x0_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-bug.c

@@ -65,4 +65,5 @@ MACHINE_START(BUG, "BugLabs BUGBase")
 	.handle_irq = imx31_handle_irq,
 	.timer = &bug_timer,
 	.init_machine = bug_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-cpuimx27.c

@@ -318,4 +318,5 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
 	.handle_irq = imx27_handle_irq,
 	.timer = &eukrea_cpuimx27_timer,
 	.init_machine = eukrea_cpuimx27_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-cpuimx35.c

@@ -201,4 +201,5 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
 	.handle_irq = imx35_handle_irq,
 	.timer = &eukrea_cpuimx35_timer,
 	.init_machine = eukrea_cpuimx35_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -170,4 +170,5 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
 	.handle_irq = imx25_handle_irq,
 	.timer = &eukrea_cpuimx25_timer,
 	.init_machine = eukrea_cpuimx25_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -282,4 +282,5 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
 	.handle_irq = imx27_handle_irq,
 	.timer = &visstrim_m10_timer,
 	.init_machine = visstrim_m10_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx27ipcam.c

@@ -78,4 +78,5 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mx27ipcam_timer,
 	.init_machine = mx27ipcam_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx27lite.c

@@ -84,4 +84,5 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mx27lite_timer,
 	.init_machine = mx27lite_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx6q.c

@@ -83,4 +83,5 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
 	.timer		= &imx6q_timer,
 	.init_machine	= imx6q_init_machine,
 	.dt_compat	= imx6q_dt_compat,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -279,4 +279,5 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
 	.handle_irq = imx31_handle_irq,
 	.timer = &kzm_timer,
 	.init_machine = kzm_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx1ads.c

@@ -147,6 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.handle_irq = imx1_handle_irq,
 	.timer = &mx1ads_timer,
 	.init_machine = mx1ads_init,
+	.restart	= mxc_restart,
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
@@ -157,4 +158,5 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.handle_irq = imx1_handle_irq,
 	.timer = &mx1ads_timer,
 	.init_machine = mx1ads_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx21ads.c

@@ -312,4 +312,5 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.handle_irq = imx21_handle_irq,
 	.timer = &mx21ads_timer,
 	.init_machine = mx21ads_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -270,4 +270,5 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	.handle_irq = imx25_handle_irq,
 	.timer = &mx25pdk_timer,
 	.init_machine = mx25pdk_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -425,4 +425,5 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mx27pdk_timer,
 	.init_machine = mx27pdk_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx27ads.c

@@ -351,4 +351,5 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mx27ads_timer,
 	.init_machine = mx27ads_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31_3ds.c

@@ -770,4 +770,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.timer = &mx31_3ds_timer,
 	.init_machine = mx31_3ds_init,
 	.reserve = mx31_3ds_reserve,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31ads.c

@@ -542,4 +542,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	.handle_irq = imx31_handle_irq,
 	.timer = &mx31ads_timer,
 	.init_machine = mx31ads_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31lilly.c

@@ -303,4 +303,5 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.handle_irq = imx31_handle_irq,
 	.timer = &mx31lilly_timer,
 	.init_machine = mx31lilly_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31lite.c

@@ -287,4 +287,5 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	.handle_irq = imx31_handle_irq,
 	.timer = &mx31lite_timer,
 	.init_machine = mx31lite_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31moboard.c

@@ -600,4 +600,5 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.handle_irq = imx31_handle_irq,
 	.timer = &mx31moboard_timer,
 	.init_machine = mx31moboard_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -224,4 +224,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.handle_irq = imx35_handle_irq,
 	.timer = &mx35pdk_timer,
 	.init_machine = mx35_3ds_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mxt_td60.c

@@ -274,4 +274,5 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	.handle_irq = imx27_handle_irq,
 	.timer = &mxt_td60_timer,
 	.init_machine = mxt_td60_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-pca100.c

@@ -442,4 +442,5 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.handle_irq = imx27_handle_irq,
 	.init_machine = pca100_init,
 	.timer = &pca100_timer,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-pcm037.c

@@ -696,4 +696,5 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.handle_irq = imx31_handle_irq,
 	.timer = &pcm037_timer,
 	.init_machine = pcm037_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-pcm038.c

@@ -357,4 +357,5 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.handle_irq = imx27_handle_irq,
 	.timer = &pcm038_timer,
 	.init_machine = pcm038_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-pcm043.c

@@ -425,4 +425,5 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.handle_irq = imx35_handle_irq,
 	.timer = &pcm043_timer,
 	.init_machine = pcm043_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-qong.c

@@ -273,4 +273,5 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.handle_irq = imx31_handle_irq,
 	.timer = &qong_timer,
 	.init_machine = qong_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-scb9328.c

@@ -144,4 +144,5 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.handle_irq = imx1_handle_irq,
 	.timer = &scb9328_timer,
 	.init_machine = scb9328_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-vpr200.c

@@ -322,4 +322,5 @@ MACHINE_START(VPR200, "VPR200")
 	.handle_irq = imx35_handle_irq,
 	.timer = &vpr200_timer,
 	.init_machine = vpr200_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-cpuimx51.c

@@ -297,4 +297,5 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-cpuimx51sd.c

@@ -335,4 +335,5 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51sd_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-mx50_rdp.c

@@ -222,4 +222,5 @@ MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
 	.handle_irq = imx50_handle_irq,
 	.timer = &mx50_rdp_timer,
 	.init_machine = mx50_rdp_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_3ds.c

@@ -175,4 +175,5 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_3ds_timer,
 	.init_machine = mx51_3ds_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -426,4 +426,5 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_babbage_timer,
 	.init_machine = mx51_babbage_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_efikamx.c

@@ -182,7 +182,7 @@ static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initcon
 	.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
 };
 
-void mx51_efikamx_reset(void)
+static void mx51_efikamx_restart(char mode, const char *cmd)
 {
 	if (system_rev == 0x11)
 		gpio_direction_output(EFIKAMX_RESET1_1, 0);
@@ -292,4 +292,5 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_efikamx_timer,
 	.init_machine = mx51_efikamx_init,
+	.restart = mx51_efikamx_restart,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_efikasb.c

@@ -287,4 +287,5 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
 	.handle_irq = imx51_handle_irq,
 	.init_machine =  efikasb_board_init,
 	.timer = &mx51_efikasb_timer,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_ard.c

@@ -257,4 +257,5 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_ard_timer,
 	.init_machine = mx53_ard_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_evk.c

@@ -175,4 +175,5 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_evk_timer,
 	.init_machine = mx53_evk_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_loco.c

@@ -317,4 +317,5 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_loco_timer,
 	.init_machine = mx53_loco_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_smd.c

@@ -164,4 +164,5 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_smd_timer,
 	.init_machine = mx53_smd_board_init,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/imx51-dt.c

@@ -115,4 +115,5 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.timer		= &imx51_timer,
 	.init_machine	= imx51_dt_init,
 	.dt_compat	= imx51_dt_board_compat,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-mx5/imx53-dt.c

@@ -125,4 +125,5 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.timer		= &imx53_timer,
 	.init_machine	= imx53_dt_init,
 	.dt_compat	= imx53_dt_board_compat,
+	.restart	= mxc_restart,
 MACHINE_END

arch/arm/plat-mxc/include/mach/common.h

@@ -71,8 +71,8 @@ extern int mx6q_clocks_init(void);
 extern struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_restart(char, const char *);
 extern void mxc_arch_reset_init(void __iomem *);
-extern void mx51_efikamx_reset(void);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);
 

arch/arm/plat-mxc/include/mach/system.h

@@ -22,6 +22,8 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-void arch_reset(char mode, const char *cmd);
+static inline void arch_reset(char mode, const char *cmd)
+{
+}
 
 #endif /* __ASM_ARCH_MXC_SYSTEM_H__ */

arch/arm/plat-mxc/system.c

@@ -37,17 +37,10 @@ static void __iomem *wdog_base;
 /*
  * Reset the system. It is called by machine_restart().
  */
-void arch_reset(char mode, const char *cmd)
+void mxc_restart(char mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
-#ifdef CONFIG_MACH_MX51_EFIKAMX
-	if (machine_is_mx51_efikamx()) {
-		mx51_efikamx_reset();
-		return;
-	}
-#endif
-
 	if (cpu_is_mx1()) {
 		wcr_enable = (1 << 0);
 	} else {