Pārlūkot izejas kodu

regulators: Fixed errors in ab8500 register mapping

For INTCORE and TVOUT regulators, the low power register bit is
included in the mask so that enable will set the regulator in
normal (high power) mode.

ANAMIC1, ANAMIC2, DMIC regulator settings are swapped with each
other so that the correct regulator gets enabled/disabled.

ANA regulator register address is corrected.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Bengt Jonsson 14 gadi atpakaļ
vecāks
revīzija
65e03ed2d0
1 mainītis faili ar 6 papildinājumiem un 6 dzēšanām
  1. 6 6
      drivers/regulator/ab8500.c

+ 6 - 6
drivers/regulator/ab8500.c

@@ -330,19 +330,19 @@ static struct ab8500_regulator_info ab8500_regulator_info[] = {
 			ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
 	AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0xf,
 			ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
-	AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x4, 0x4, 0x03, 0x80, 0x38,
+	AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x44, 0x4, 0x03, 0x80, 0x38,
 		ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
 
 	/*
 	 * Fixed Voltage LDOs
 	 *		 name,	o/p uV, ctrl bank, ctrl reg, enable, disable
 	 */
-	AB8500_FIXED_LDO(TVOUT,	  2000, 0x03,      0x80,     0x2,    0x2),
+	AB8500_FIXED_LDO(TVOUT,	  2000, 0x03,      0x80,     0x82,    0x2),
 	AB8500_FIXED_LDO(AUDIO,   2000, 0x03,      0x83,     0x2,    0x2),
-	AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03,      0x83,     0x4,    0x4),
-	AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03,      0x83,     0x8,    0x8),
-	AB8500_FIXED_LDO(DMIC,    1800, 0x03,      0x83,     0x10,   0x10),
-	AB8500_FIXED_LDO(ANA,     1200, 0x03,      0x83,     0xc,    0x4),
+	AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03,      0x83,     0x08,    0x08),
+	AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03,      0x83,     0x10,    0x10),
+	AB8500_FIXED_LDO(DMIC,    1800, 0x03,      0x83,     0x04,   0x04),
+	AB8500_FIXED_LDO(ANA,     1200, 0x04,      0x06,     0xc,    0x4),
 };
 
 static inline struct ab8500_regulator_info *find_regulator_info(int id)