Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:

	drivers/net/tg3.c
	drivers/net/wireless/rt2x00/rt2x00dev.c
	net/mac80211/ieee80211_i.h

.gitignore

@@ -52,8 +52,8 @@ series
 
 # cscope files
 cscope.*
+ncscope.*
 
 *.orig
-*.rej
 *~
 \#*#

Documentation/ABI/testing/sysfs-class-bdi

@@ -14,6 +14,10 @@ MAJOR:MINOR
 	non-block filesystems which provide their own BDI, such as NFS
 	and FUSE.
 
+MAJOR:MINOR-fuseblk
+
+	Value of st_dev on fuseblk filesystems.
+
 default
 
 	The default backing dev, used for non-block device backed

Documentation/DocBook/kernel-locking.tmpl

@@ -703,6 +703,31 @@
 </sect1>
 </chapter>
 
+<chapter id="trylock-functions">
+ <title>The trylock Functions</title>
+  <para>
+   There are functions that try to acquire a lock only once and immediately
+   return a value telling about success or failure to acquire the lock.
+   They can be used if you need no access to the data protected with the lock
+   when some other thread is holding the lock. You should acquire the lock
+   later if you then need access to the data protected with the lock.
+  </para>
+
+  <para>
+    <function>spin_trylock()</function> does not spin but returns non-zero if
+    it acquires the spinlock on the first try or 0 if not. This function can
+    be used in all contexts like <function>spin_lock</function>: you must have
+    disabled the contexts that might interrupt you and acquire the spin lock.
+  </para>
+
+  <para>
+    <function>mutex_trylock()</function> does not suspend your task
+    but returns non-zero if it could lock the mutex on the first try
+    or 0 if not. This function cannot be safely used in hardware or software
+    interrupt contexts despite not sleeping.
+  </para>
+</chapter>
+
   <chapter id="Examples">
    <title>Common Examples</title>
     <para>

Documentation/cpu-freq/governors.txt

@@ -129,14 +129,6 @@ to its default value of '80' it means that between the checking
 intervals the CPU needs to be on average more than 80% in use to then
 decide that the CPU frequency needs to be increased.  
 
-sampling_down_factor: this parameter controls the rate that the CPU
-makes a decision on when to decrease the frequency.  When set to its
-default value of '5' it means that at 1/5 the sampling_rate the kernel
-makes a decision to lower the frequency.  Five "lower rate" decisions
-have to be made in a row before the CPU frequency is actually lower.
-If set to '1' then the frequency decreases as quickly as it increases,
-if set to '2' it decreases at half the rate of the increase.
-
 ignore_nice_load: this parameter takes a value of '0' or '1'. When
 set to '0' (its default), all processes are counted towards the
 'cpu utilisation' value.  When set to '1', the processes that are

Documentation/hwmon/ibmaem

@@ -0,0 +1,37 @@
+Kernel driver ibmaem
+======================
+
+Supported systems:
+  * Any recent IBM System X server with Active Energy Manager support.
+    This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
+    x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
+    driver ("ipmi-si") needs to be loaded for this driver to do anything.
+    Prefix: 'ibmaem'
+    Datasheet: Not available
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements sensor reading support for the energy and power
+meters available on various IBM System X hardware through the BMC.  All
+sensor banks will be exported as platform devices; this driver can talk
+to both v1 and v2 interfaces.  This driver is completely separate from the
+older ibmpex driver.
+
+The v1 AEM interface has a simple set of features to monitor energy use.
+There is a register that displays an estimate of raw energy consumption
+since the last BMC reset, and a power sensor that returns average power
+use over a configurable interval.
+
+The v2 AEM interface is a bit more sophisticated, being able to present
+a wider range of energy and power use registers, the power cap as
+set by the AEM software, and temperature sensors.
+
+Special Features
+----------------
+
+The "power_cap" value displays the current system power cap, as set by
+the Active Energy Manager software.  Setting the power cap from the host
+is not currently supported.

Documentation/kernel-parameters.txt

@@ -398,9 +398,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	cio_ignore=	[S390]
 			See Documentation/s390/CommonIO for details.
 
-	cio_msg=	[S390]
-			See Documentation/s390/CommonIO for details.
-
 	clock=		[BUGS=X86-32, HW] gettimeofday clocksource override.
 			[Deprecated]
 			Forces specified clocksource (if available) to be used
@@ -689,6 +686,12 @@ and is between 256 and 4096 characters. It is defined in the file
 	floppy=		[HW]
 			See Documentation/floppy.txt.
 
+	force_pal_cache_flush
+			[IA-64] Avoid check_sal_cache_flush which may hang on
+			buggy SAL_CACHE_FLUSH implementations. Using this
+			parameter will force ia64_sal_cache_flush to call
+			ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
+
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
 			support via parallel port (up to 5 devices per port)

Documentation/lguest/lguest.c

@@ -157,6 +157,9 @@ struct virtqueue
 
 	/* The routine to call when the Guest pings us. */
 	void (*handle_output)(int fd, struct virtqueue *me);
+
+	/* Outstanding buffers */
+	unsigned int inflight;
 };
 
 /* Remember the arguments to the program so we can "reboot" */
@@ -702,6 +705,7 @@ static unsigned get_vq_desc(struct virtqueue *vq,
 			errx(1, "Looped descriptor");
 	} while ((i = next_desc(vq, i)) != vq->vring.num);
 
+	vq->inflight++;
 	return head;
 }
 
@@ -719,6 +723,7 @@ static void add_used(struct virtqueue *vq, unsigned int head, int len)
 	/* Make sure buffer is written before we update index. */
 	wmb();
 	vq->vring.used->idx++;
+	vq->inflight--;
 }
 
 /* This actually sends the interrupt for this virtqueue */
@@ -726,8 +731,9 @@ static void trigger_irq(int fd, struct virtqueue *vq)
 {
 	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
 
-	/* If they don't want an interrupt, don't send one. */
-	if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+	/* If they don't want an interrupt, don't send one, unless empty. */
+	if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+	    && vq->inflight)
 		return;
 
 	/* Send the Guest an interrupt tell them we used something up. */
@@ -1107,6 +1113,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	vq->next = NULL;
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
+	vq->inflight = 0;
 
 	/* Initialize the configuration. */
 	vq->config.num = num_descs;
@@ -1368,6 +1375,7 @@ static void setup_tun_net(const char *arg)
 
 	/* Tell Guest what MAC address to use. */
 	add_feature(dev, VIRTIO_NET_F_MAC);
+	add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
 	set_config(dev, sizeof(conf), &conf);
 
 	/* We don't need the socket any more; setup is done. */

Documentation/networking/bridge.txt

@@ -1,6 +1,6 @@
 In order to use the Ethernet bridging functionality, you'll need the
 userspace tools. These programs and documentation are available
-at http://bridge.sourceforge.net.  The download page is
+at http://www.linux-foundation.org/en/Net:Bridge.  The download page is
 http://prdownloads.sourceforge.net/bridge.
 
 If you still have questions, don't hesitate to post to the mailing list 

Kbuild

@@ -96,5 +96,4 @@ missing-syscalls: scripts/checksyscalls.sh FORCE
 	$(call cmd,syscalls)
 
 # Delete all targets during make clean
-clean-files := $(addprefix $(objtree)/,$(targets))
-
+clean-files := $(addprefix $(objtree)/,$(filter-out $(bounds-file) $(offsets-file),$(targets)))

MAINTAINERS

@@ -982,13 +982,6 @@ L:	bonding-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
 
-BROADBAND PROCESSOR ARCHITECTURE
-P:	Arnd Bergmann
-M:	arnd@arndb.de
-L:	linuxppc-dev@ozlabs.org
-W:	http://www.penguinppc.org/ppc64/
-S:	Supported
-
 BROADCOM B44 10/100 ETHERNET DRIVER
 P:	Gary Zambrano
 M:	zambrano@broadcom.com
@@ -1052,6 +1045,14 @@ L:	linux-kernel@vger.kernel.org
 L:	discuss@x86-64.org
 S:	Maintained
 
+CELL BROADBAND ENGINE ARCHITECTURE
+P:	Arnd Bergmann
+M:	arnd@arndb.de
+L:	linuxppc-dev@ozlabs.org
+L:	cbe-oss-dev@ozlabs.org
+W:	http://www.ibm.com/developerworks/power/cell/
+S:	Supported
+
 CFAG12864B LCD DRIVER
 P:	Miguel Ojeda Sandonis
 M:	maxextreme@gmail.com
@@ -1239,6 +1240,20 @@ L:	video4linux-list@redhat.com
 W:	http://linuxtv.org
 S:	Maintained
 
+CXGB3 ETHERNET DRIVER (CXGB3)
+P:	Divy Le Ray
+M:	divy@chelsio.com
+L:	netdev@vger.kernel.org
+W:	http://www.chelsio.com
+S:	Supported
+
+CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
+P:	Steve Wise
+M:	swise@chelsio.com
+L:	general@lists.openfabrics.org
+W:	http://www.openfabrics.org
+S:	Supported
+
 CYBERPRO FB DRIVER
 P:	Russell King
 M:	rmk@arm.linux.org.uk
@@ -1596,7 +1611,7 @@ ETHERNET BRIDGE
 P:	Stephen Hemminger
 M:	shemminger@linux-foundation.org
 L:	bridge@lists.linux-foundation.org
-W:	http://bridge.sourceforge.net/
+W:	http://www.linux-foundation.org/en/Net:Bridge
 S:	Maintained
 
 ETHERTEAM 16I DRIVER
@@ -1645,8 +1660,10 @@ W:	http://linux-fbdev.sourceforge.net/
 S:	Maintained
 
 FREESCALE DMA DRIVER
-P;	Zhang Wei
-M:	wei.zhang@freescale.com
+P:	Li Yang
+M:	leoli@freescale.com
+P:	Zhang Wei
+M:	zw@zh-kernel.org
 L:	linuxppc-embedded@ozlabs.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
@@ -1940,8 +1957,10 @@ L:	lm-sensors@lm-sensors.org
 S:	Maintained
 
 I2C SUBSYSTEM
-P:	Jean Delvare
+P:	Jean Delvare (PC drivers, core)
 M:	khali@linux-fr.org
+P:	Ben Dooks (embedded platforms)
+M:	ben-linux@fluff.org
 L:	i2c@lm-sensors.org
 T:	quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
 S:	Maintained
@@ -2327,7 +2346,8 @@ S:	Maintained
 KERNEL BUILD (kbuild: Makefile, scripts/Makefile.*)
 P:	Sam Ravnborg
 M:	sam@ravnborg.org
-T:	git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-next.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
 
@@ -2349,24 +2369,24 @@ S:	Supported
 KERNEL VIRTUAL MACHINE (KVM)
 P:	Avi Kivity
 M:	avi@qumranet.com
-L:	kvm-devel@lists.sourceforge.net
-W:	kvm.sourceforge.net
+L:	kvm@vger.kernel.org
+W:	http://kvm.qumranet.com
 S:	Supported
 
 KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
 P:	Hollis Blanchard
 M:	hollisb@us.ibm.com
-L:	kvm-ppc-devel@lists.sourceforge.net
-W:	kvm.sourceforge.net
+L:	kvm-ppc@vger.kernel.org
+W:	http://kvm.qumranet.com
 S:	Supported
 
-KERNEL VIRTUAL MACHINE For Itanium(KVM/IA64)
+KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
 P:	Anthony Xu
 M:	anthony.xu@intel.com
 P:	Xiantao Zhang
 M:	xiantao.zhang@intel.com
-L:	kvm-ia64-devel@lists.sourceforge.net
-W:	kvm.sourceforge.net
+L:	kvm-ia64@vger.kernel.org
+W:	http://kvm.qumranet.com
 S:	Supported
 
 KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
@@ -2817,6 +2837,15 @@ M:	jirislaby@gmail.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
+P:	Andrew Gallatin
+M:	gallatin@myri.com
+P:	Brice Goglin
+M:	brice@myri.com
+L:	netdev@vger.kernel.org
+W:	http://www.myri.com/scs/download-Myri10GE.html
+S:	Supported
+
 NATSEMI ETHERNET DRIVER (DP8381x)
 P: 	Tim Hockin
 M:	thockin@hockin.org
@@ -3130,7 +3159,7 @@ PCI ERROR RECOVERY
 P:	Linas Vepstas
 M:	linas@austin.ibm.com
 L:	linux-kernel@vger.kernel.org
-L:	linux-pci@atrey.karlin.mff.cuni.cz
+L:	linux-pci@vger.kernel.org
 S:	Supported
 
 PCI SUBSYSTEM
@@ -3764,6 +3793,14 @@ M:	dbrownell@users.sourceforge.net
 L:	spi-devel-general@lists.sourceforge.net
 S:	Maintained
 
+SPU FILE SYSTEM
+P:	Jeremy Kerr
+M:	jk@ozlabs.org
+L:	linuxppc-dev@ozlabs.org
+L:	cbe-oss-dev@ozlabs.org
+W:	http://www.ibm.com/developerworks/power/cell/
+S:	Supported
+
 STABLE BRANCH:
 P:	Greg Kroah-Hartman
 M:	greg@kroah.com
@@ -4019,12 +4056,41 @@ M:	ballabio_dario@emc.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+UCLINUX (AND M68KNOMMU)
+P:	Greg Ungerer
+M:	gerg@uclinux.org
+W:	http://www.uclinux.org/
+L:	uclinux-dev@uclinux.org  (subscribers-only)
+S:	Maintained
+
+UCLINUX FOR NEC V850
+P:	Miles Bader
+
+UCLINUX FOR RENESAS H8/300
+P:	Yoshinori Sato
+M:	ysato@users.sourceforge.jp
+W:	http://uclinux-h8.sourceforge.jp/
+S:	Supported
+
 UDF FILESYSTEM
 P:	Jan Kara
 M:	jack@suse.cz
 W:	http://linux-udf.sourceforge.net
 S:	Maintained
 
+UFS FILESYSTEM
+P:	Evgeniy Dushistov
+M:	dushistov@mail.ru
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
+UltraSPARC (sparc64):
+P:	David S. Miller
+M:	davem@davemloft.net
+L:	sparclinux@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
+S:	Maintained
+
 UNIFORM CDROM DRIVER
 P:	Jens Axboe
 M:	axboe@kernel.dk
@@ -4071,6 +4137,13 @@ L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 
+USB DIAMOND RIO500 DRIVER
+P:	Cesar Miquel
+M:	miquel@df.uba.ar
+L:	rio500-users@lists.sourceforge.net
+W:	http://rio500.sourceforge.net
+S:	Maintained
+
 USB EHCI DRIVER
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
@@ -4302,6 +4375,14 @@ M:	gregkh@suse.de
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+UTIL-LINUX-NG PACKAGE
+P:	Karel Zak
+M:	kzak@redhat.com
+L:	util-linux-ng@vger.kernel.org
+W:	http://kernel.org/~kzak/util-linux-ng/
+T:	git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
+S:	Maintained
+
 VFAT/FAT/MSDOS FILESYSTEM:
 P:	OGAWA Hirofumi
 M:	hirofumi@mail.parknet.co.jp
@@ -4325,42 +4406,6 @@ M:	romieu@fr.zoreil.com
 L:	netdev@vger.kernel.org
 S:	Maintained
 
-UCLINUX (AND M68KNOMMU)
-P:	Greg Ungerer
-M:	gerg@uclinux.org
-W:	http://www.uclinux.org/
-L:	uclinux-dev@uclinux.org  (subscribers-only)
-S:	Maintained
-
-UCLINUX FOR NEC V850
-P:	Miles Bader
-
-UCLINUX FOR RENESAS H8/300
-P:	Yoshinori Sato
-M:	ysato@users.sourceforge.jp
-W:	http://uclinux-h8.sourceforge.jp/
-S:	Supported
-
-UFS FILESYSTEM
-P:	Evgeniy Dushistov
-M:	dushistov@mail.ru
-L:	linux-kernel@vger.kernel.org
-S:	Maintained
-
-UltraSPARC (sparc64):
-P:	David S. Miller
-M:	davem@davemloft.net
-L:	sparclinux@vger.kernel.org
-T:	git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
-S:	Maintained
-
-USB DIAMOND RIO500 DRIVER
-P:	Cesar Miquel
-M:	miquel@df.uba.ar
-L:	rio500-users@lists.sourceforge.net
-W:	http://rio500.sourceforge.net
-S:	Maintained
-
 VIDEO FOR LINUX
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 26
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Funky Weasel is Jiggy wit it
 
 # *DOCUMENTATION*
@@ -1114,6 +1114,7 @@ MRPROPER_DIRS  += include/config include2 usr/include
 MRPROPER_FILES += .config .config.old include/asm .version .old_version \
                   include/linux/autoconf.h include/linux/version.h      \
                   include/linux/utsrelease.h                            \
+                  include/linux/bounds.h include/asm*/asm-offsets.h     \
 		  Module.symvers tags TAGS cscope*
 
 # clean - Delete most, but leave enough to build external modules
@@ -1431,7 +1432,7 @@ define xtags
 	elif $1 --version 2>&1 | grep -iq emacs; then \
 	    $(all-sources) | xargs $1 -a; \
 	    $(all-kconfigs) | xargs $1 -a \
-		--regex='/^[ \t]*(menu|)config[ \t]+\([a-zA-Z0-9_]+\)/\2/'; \
+		--regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'; \
 	    $(all-defconfigs) | xargs -r $1 -a \
 		--regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \
 	else \

arch/alpha/kernel/init_task.c

@@ -9,7 +9,6 @@
 
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);

arch/arm/common/locomo.c

@@ -321,11 +321,42 @@ static void locomo_gpio_unmask_irq(unsigned int irq)
 	locomo_writel(r, mapbase + LOCOMO_GIE);
 }
 
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+
+static int locomo_gpio_type(unsigned int irq, unsigned int type)
+{
+	unsigned int mask;
+	void __iomem *mapbase = get_irq_chip_data(irq);
+
+	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
+
+	if (type == IRQT_PROBE) {
+		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+			return 0;
+		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+	}
+
+	if (type & __IRQT_RISEDGE)
+		GPIO_IRQ_rising_edge |= mask;
+	else
+		GPIO_IRQ_rising_edge &= ~mask;
+	if (type & __IRQT_FALEDGE)
+		GPIO_IRQ_falling_edge |= mask;
+	else
+		GPIO_IRQ_falling_edge &= ~mask;
+	locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
+	locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
+
+	return 0;
+}
+
 static struct irq_chip locomo_gpio_chip = {
-	.name	= "LOCOMO-gpio",
-	.ack	= locomo_gpio_ack_irq,
-	.mask	= locomo_gpio_mask_irq,
-	.unmask	= locomo_gpio_unmask_irq,
+	.name	  = "LOCOMO-gpio",
+	.ack	  = locomo_gpio_ack_irq,
+	.mask	  = locomo_gpio_mask_irq,
+	.unmask	  = locomo_gpio_unmask_irq,
+	.set_type = locomo_gpio_type,
 };
 
 static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
@@ -450,22 +481,18 @@ static void locomo_setup_irq(struct locomo *lchip)
 	set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
-	set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
-	set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
-	set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
-	set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
 
 	/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
 	set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
@@ -488,7 +515,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
 
 	/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
-	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
+	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
 		set_irq_chip(irq, &locomo_spi_chip);
 		set_irq_chip_data(irq, irqbase);
 		set_irq_handler(irq, handle_edge_irq);
@@ -574,20 +601,20 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
 
 	save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPO);
-	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPICT);	/* SPI */
+	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT);	/* SPI */
 	locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
 	save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPE);
 	save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);	/* ADSTART */
 	locomo_writel(0x00, lchip->base + LOCOMO_ASD);
-	save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPIMD);	/* SPI */
-	locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD);
+	save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);	/* SPI */
+	locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
 
 	locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
 	locomo_writel(0x00, lchip->base + LOCOMO_DAC);
 	locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
 
-	if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) )
+	if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
 		locomo_writel(0x00, lchip->base + LOCOMO_C32K); 	/* CLK32 off */
 	else
 		/* 18MHz already enabled, so no wait */
@@ -616,10 +643,10 @@ static int locomo_resume(struct platform_device *dev)
 	spin_lock_irqsave(&lchip->lock, flags);
 
 	locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
-	locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT);
+	locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
 	locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
 	locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
-	locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD);
+	locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
 
 	locomo_writel(0x00, lchip->base + LOCOMO_C32K);
 	locomo_writel(0x90, lchip->base + LOCOMO_TADC);
@@ -688,9 +715,9 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 
 	/* GPIO */
 	locomo_writel(0, lchip->base + LOCOMO_GPO);
-	locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
 			, lchip->base + LOCOMO_GPE);
-	locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
 			, lchip->base + LOCOMO_GPD);
 	locomo_writel(0, lchip->base + LOCOMO_GIE);
 
@@ -833,7 +860,10 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
 	spin_lock_irqsave(&lchip->lock, flags);
 
 	r = locomo_readl(lchip->base + LOCOMO_GPD);
-	r &= ~bits;
+	if (dir)
+		r |= bits;
+	else
+		r &= ~bits;
 	locomo_writel(r, lchip->base + LOCOMO_GPD);
 
 	r = locomo_readl(lchip->base + LOCOMO_GPE);

arch/arm/kernel/armksyms.c

@@ -179,3 +179,5 @@ EXPORT_SYMBOL(_find_next_zero_bit_be);
 EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
+
+EXPORT_SYMBOL(copy_page);

arch/arm/kernel/arthur.c

@@ -90,3 +90,5 @@ static void __exit arthur_exit(void)
 
 module_init(arthur_init);
 module_exit(arthur_exit);
+
+MODULE_LICENSE("GPL");

arch/arm/kernel/init_task.c

@@ -13,7 +13,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);

arch/arm/mach-at91/at91x40.c

@@ -16,16 +16,32 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/at91x40.h>
 #include <asm/arch/at91_st.h>
+#include <asm/arch/timex.h>
 #include "generic.h"
 
 /*
- * This is used in the gpio code, stub locally.
+ * Export the clock functions for the AT91X40. Some external code common
+ * to all AT91 family parts relys on this, like the gpio and serial support.
  */
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
 
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return AT91X40_MASTER_CLOCK;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
 void __init at91x40_initialize(unsigned long main_clock)
 {
 	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)

arch/arm/mach-integrator/impd1.c

@@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev)
 
 	lm_set_drvdata(dev, impd1);
 
-	printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+	printk("IM-PD1 found at 0x%08lx\n",
+		(unsigned long)dev->resource.start);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
 		impd1->vcos[i].owner = THIS_MODULE,

arch/arm/mach-integrator/pci_v3.c

@@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
 		v3_readb(V3_LB_ISTAT));
 	printk(KERN_DEBUG "%s", buf);
-	printascii(buf);
 #endif
 
 	v3_writeb(V3_LB_ISTAT, 0);
@@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
 	unsigned long pc = instruction_pointer(regs);
 	unsigned long instr = *(unsigned long *)pc;
 	char buf[128];
+	extern void printascii(const char *);
 
 	sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
 		"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,

arch/arm/mach-omap1/board-palmte.c

@@ -24,7 +24,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/tsc2102.h>
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
@@ -63,7 +62,7 @@ static const int palmte_keymap[] = {
 	KEY(1, 1, KEY_DOWN),
 	KEY(1, 2, KEY_UP),
 	KEY(1, 3, KEY_RIGHT),
-	KEY(1, 4, KEY_CENTER),
+	KEY(1, 4, KEY_ENTER),
 	0,
 };
 
@@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 #define palmte_get_power_status	NULL
 #endif
 
-static struct tsc2102_config palmte_tsc2102_config = {
-	.use_internal	= 0,
-	.monitor	= TSC_BAT1 | TSC_AUX | TSC_TEMP,
-	.temp_at25c	= { 2200, 2615 },
-	.apm_report	= palmte_get_power_status,
-	.alsa_config	= &palmte_alsa_config,
-};
-
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_USB,		&palmte_usb_config },
 	{ OMAP_TAG_MMC,		&palmte_mmc_config },
@@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
 		.bus_num	= 2,	/* uWire (officially) */
 		.chip_select	= 0,	/* As opposed to 3 */
 		.irq		= OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
-		.platform_data	= &palmte_tsc2102_config,
 		.max_speed_hz	= 8000000,
 	},
 };

arch/arm/mach-omap1/board-palmz71.c

@@ -65,7 +65,7 @@ static int palmz71_keymap[] = {
 	KEY(1, 1, KEY_DOWN),
 	KEY(1, 2, KEY_UP),
 	KEY(1, 3, KEY_RIGHT),
-	KEY(1, 4, KEY_CENTER),
+	KEY(1, 4, KEY_ENTER),
 	KEY(2, 0, KEY_CAMERA),
 	0,
 };

arch/arm/mach-omap2/board-2430sdp.c

@@ -208,6 +208,7 @@ static void __init omap_2430sdp_init(void)
 
 static void __init omap_2430sdp_map_io(void)
 {
+	omap2_set_globals_243x();
 	omap2_map_common_io();
 }
 

arch/arm/mach-omap2/board-apollon.c

@@ -394,6 +394,7 @@ static void __init omap_apollon_init(void)
 
 static void __init omap_apollon_map_io(void)
 {
+	omap2_set_globals_242x();
 	omap2_map_common_io();
 }
 

arch/arm/mach-omap2/board-generic.c

@@ -65,6 +65,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
+	omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
 	omap2_map_common_io();
 }
 

arch/arm/mach-omap2/board-h4.c

@@ -420,6 +420,7 @@ static void __init omap_h4_init(void)
 
 static void __init omap_h4_map_io(void)
 {
+	omap2_set_globals_242x();
 	omap2_map_common_io();
 }
 

arch/arm/mach-omap2/clock.c

@@ -205,7 +205,9 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	/* REVISIT: What are the appropriate exclusions for 34XX? */
 	/* OMAP3: ignore DSS-mod clocks */
 	if (cpu_is_omap34xx() &&
-	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
+	     ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
+	     clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
 		return;
 
 	/* Check if both functional and interface clocks

arch/arm/mach-omap2/clock34xx.h

@@ -836,7 +836,8 @@ static struct clk dpll5_m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
 	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
 	.clksel		= div16_dpll5_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1046,12 +1047,13 @@ static struct clk iva2_ck = {
 	.name		= "iva2_ck",
 	.parent		= &dpll2_m2_ck,
 	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
 					  OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
 	.clksel		= iva2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1836,7 +1838,8 @@ static struct clk omapctrl_ick = {
 static struct clk ssi_l4_ick = {
 	.name		= "ssi_l4_ick",
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2344,7 +2347,7 @@ static struct clk gpio6_fck = {
 	.name		= "gpio6_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2353,7 +2356,7 @@ static struct clk gpio5_fck = {
 	.name		= "gpio5_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2362,7 +2365,7 @@ static struct clk gpio4_fck = {
 	.name		= "gpio4_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2371,7 +2374,7 @@ static struct clk gpio3_fck = {
 	.name		= "gpio3_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2380,7 +2383,7 @@ static struct clk gpio2_fck = {
 	.name		= "gpio2_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };

arch/arm/mach-omap2/cm-regbits-34xx.h

@@ -56,6 +56,7 @@
 
 /* CM_FCLKEN_IVA2 */
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2			(1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
 
 /* CM_CLKEN_PLL_IVA2 */
 #define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT		8

arch/arm/mach-omap2/mailbox.c

@@ -70,6 +70,9 @@ struct omap_mbox2_priv {
 
 static struct clk *mbox_ick_handle;
 
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+				  omap_mbox_type_t irq);
+
 static inline unsigned int mbox_read_reg(unsigned int reg)
 {
 	return __raw_readl(mbox_base + reg);
@@ -81,7 +84,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg)
 }
 
 /* Mailbox H/W preparations */
-static inline int omap2_mbox_startup(struct omap_mbox *mbox)
+static int omap2_mbox_startup(struct omap_mbox *mbox)
 {
 	unsigned int l;
 
@@ -97,38 +100,40 @@ static inline int omap2_mbox_startup(struct omap_mbox *mbox)
 	l |= 0x00000011;
 	mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
+	omap2_mbox_enable_irq(mbox, IRQ_RX);
+
 	return 0;
 }
 
-static inline void omap2_mbox_shutdown(struct omap_mbox *mbox)
+static void omap2_mbox_shutdown(struct omap_mbox *mbox)
 {
 	clk_disable(mbox_ick_handle);
 	clk_put(mbox_ick_handle);
 }
 
 /* Mailbox FIFO handle functions */
-static inline mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
+static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
 	return (mbox_msg_t) mbox_read_reg(fifo->msg);
 }
 
-static inline void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
 	mbox_write_reg(msg, fifo->msg);
 }
 
-static inline int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
 	return (mbox_read_reg(fifo->msg_stat) == 0);
 }
 
-static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
@@ -136,7 +141,7 @@ static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 }
 
 /* Mailbox IRQ handle functions */
-static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -147,7 +152,7 @@ static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 	mbox_write_reg(l, p->irqenable);
 }
 
-static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -158,7 +163,7 @@ static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 	mbox_write_reg(l, p->irqenable);
 }
 
-static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
+static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -167,7 +172,7 @@ static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 	mbox_write_reg(bit, p->irqstatus);
 }
 
-static inline int omap2_mbox_is_irq(struct omap_mbox *mbox,
+static int omap2_mbox_is_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;

arch/arm/mach-omap2/prm.h

@@ -30,7 +30,7 @@
 
 /*
  * Architecture-specific global PRM registers
- * Use prm_{read,write}_reg() with these registers.
+ * Use __raw_{read,write}l() with these registers.
  *
  * With a few exceptions, these are the register names beginning with
  * PRCM_* on 24xx, and PRM_* on 34xx.  (The exceptions are the

arch/arm/mach-orion5x/dns323-setup.c

@@ -58,7 +58,7 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci dns323_pci __initdata = {
-	.nr_controllers = 1,
+	.nr_controllers = 2,
 	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,

arch/arm/mach-orion5x/kurobox_pro-setup.c

@@ -138,7 +138,7 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci kurobox_pro_pci __initdata = {
-	.nr_controllers	= 1,
+	.nr_controllers	= 2,
 	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,

arch/arm/mach-pxa/colibri.c

@@ -98,7 +98,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= COLIBRI_ETH_IRQ,
 		.end	= COLIBRI_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
 
@@ -119,7 +119,6 @@ static void __init colibri_init(void)
 	/* DM9000 LAN */
 	pxa_gpio_mode(GPIO78_nCS_2_MD);
 	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-	set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
 
 	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }

arch/arm/mach-s3c2410/mach-bast.c

@@ -374,7 +374,7 @@ static struct resource bast_dm9k_resource[] = {
 	[2] = {
 		.start = IRQ_DM9000,
 		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 
 };

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = {
 	[2] = {
 		.start = IRQ_VR1000_DM9000A,
 		.end   = IRQ_VR1000_DM9000A,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 
 };
@@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = {
 	[2] = {
 		.start = IRQ_VR1000_DM9000N,
 		.end   = IRQ_VR1000_DM9000N,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
 	}
 };
 

arch/arm/mach-sa1100/collie.c

@@ -225,26 +225,28 @@ static void __init collie_init(void)
 	int ret = 0;
 
 	/* cpu initialize */
-	GAFR = ( GPIO_SSP_TXD | \
-		 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
-		 GPIO_32_768kHz );
-
-	GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
-		 GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
-		 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
-		 GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
-	GPLR = GPIO_GPIO18;
-
-	// PPC pin setting
-	PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
-		 PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
-	 	 PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
-
-	PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
-
-	GAFR |= GPIO_32_768kHz;
-	GPDR |= GPIO_32_768kHz;
-	TUCR  = TUCR_32_768kHz;
+	GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+		GPIO_MCP_CLK | GPIO_32_768kHz;
+
+	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+
+	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+
+	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+
+	PGSR = COLLIE_GPIO_nREMOCON_ON;
+
+	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+	PCFR = PCFR_OPDE;
+
 
 	platform_scoop_config = &collie_pcmcia_config;
 

arch/arm/mm/proc-arm925.S

@@ -332,7 +332,7 @@ ENTRY(arm925_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1

arch/arm/mm/proc-arm926.S

@@ -295,7 +295,7 @@ ENTRY(arm926_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1

arch/arm/mm/proc-arm940.S

@@ -222,7 +222,7 @@ ENTRY(arm940_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D entry
 #else
-	mcr	p15, 0, r3, c7, c10, 2		@ clean D entry
+	mcr	p15, 0, r3, c7, c6, 2		@ invalidate D entry
 #endif
 	subs	r3, r3, #1 << 26
 	bcs	2b				@ entries 63 to 0

arch/arm/mm/proc-arm946.S

@@ -265,7 +265,7 @@ ENTRY(arm946_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1

arch/arm/plat-omap/clock.c

@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/cpufreq.h>
 
 #include <asm/io.h>
 
@@ -134,9 +135,17 @@ void clk_disable(struct clk *clk)
 		return;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	BUG_ON(clk->usecount == 0);
+	if (clk->usecount == 0) {
+		printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+		       clk->name);
+		WARN_ON(1);
+		goto out;
+	}
+
 	if (arch_clock->clk_disable)
 		arch_clock->clk_disable(clk);
+
+out:
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);

arch/arm/plat-omap/dma.c

@@ -604,6 +604,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->data = data;
 #ifndef CONFIG_ARCH_OMAP1
 	chan->chain_id = -1;
+	chan->next_linked_ch = -1;
 #endif
 	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
@@ -1087,7 +1088,6 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
 			printk(KERN_ERR "omap_dma: Request failed %d\n", err);
 			return err;
 		}
-		dma_chan[channels[i]].next_linked_ch = -1;
 		dma_chan[channels[i]].prev_linked_ch = -1;
 		dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
 

arch/arm/plat-omap/mailbox.c

@@ -355,7 +355,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 			"failed to register mailbox interrupt:%d\n", ret);
 		goto fail_request_irq;
 	}
-	enable_mbox_irq(mbox, IRQ_RX);
 
 	mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
 	if (!mq) {

arch/arm/plat-s3c24xx/s3c244x.c

@@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
 
 	/* rename any peripherals used differing from the s3c2410 */
 
+	s3c_device_sdi.name  = "s3c2440-sdi";
 	s3c_device_i2c.name  = "s3c2440-i2c";
 	s3c_device_nand.name = "s3c2440-nand";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";

arch/avr32/configs/atngw100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 23:20:41 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:59 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -73,11 +73,21 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -101,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -141,16 +156,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -164,9 +182,10 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -202,6 +221,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -255,87 +275,40 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_ADVANCED is not set
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_GRE=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -343,54 +316,25 @@ CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
@@ -407,7 +351,6 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -415,6 +358,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -450,6 +394,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -531,11 +476,18 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -568,11 +520,13 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -586,6 +540,7 @@ CONFIG_MACB=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -599,7 +554,6 @@ CONFIG_PPPOE=m
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -621,6 +575,7 @@ CONFIG_SLHC=m
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -633,6 +588,7 @@ CONFIG_SLHC=m
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -640,21 +596,13 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -665,27 +613,23 @@ CONFIG_I2C_GPIO=m
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -702,9 +646,27 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -724,12 +686,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -753,14 +725,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -772,6 +742,7 @@ CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -787,6 +758,7 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -797,11 +769,13 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
 CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -816,6 +790,8 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -844,19 +820,22 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -865,10 +844,6 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -885,14 +860,11 @@ CONFIG_JBD=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -948,8 +920,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -957,12 +931,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1030,11 +1002,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1042,6 +1009,7 @@ CONFIG_KPROBES=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1052,7 +1020,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,12 +1036,14 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1083,52 +1055,90 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=m
@@ -1137,10 +1147,6 @@ CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y

arch/avr32/configs/atstk1002_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 23:07:43 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:20 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -70,11 +72,21 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -98,10 +110,15 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -147,16 +164,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -170,9 +190,10 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -208,6 +229,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -252,8 +274,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -279,6 +303,7 @@ CONFIG_LLC=m
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -314,6 +339,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -368,6 +394,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_MTD_DATAFLASH=m
 CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -395,13 +422,18 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -444,6 +476,9 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
@@ -469,11 +504,13 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -487,6 +524,7 @@ CONFIG_MACB=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -500,7 +538,6 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -556,6 +593,7 @@ CONFIG_MOUSE_GPIO=m
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -568,6 +606,7 @@ CONFIG_MOUSE_GPIO=m
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -575,21 +614,13 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -600,27 +631,23 @@ CONFIG_I2C_GPIO=m
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -637,9 +664,27 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -659,12 +704,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -682,8 +737,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -749,7 +804,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -761,14 +820,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -781,6 +838,7 @@ CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -796,6 +854,7 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -806,17 +865,20 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
 CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 
 #
 # LED drivers
 #
+CONFIG_LEDS_ATMEL_PWM=m
 CONFIG_LEDS_GPIO=m
 
 #
@@ -825,6 +887,8 @@ CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -853,19 +917,22 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -874,10 +941,6 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -895,14 +958,11 @@ CONFIG_JBD=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -957,8 +1017,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -966,7 +1028,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1028,11 +1089,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1040,6 +1096,7 @@ CONFIG_KPROBES=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,7 +1107,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1064,12 +1123,14 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1081,52 +1142,90 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=m

arch/avr32/configs/atstk1003_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 22:54:34 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:33:05 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 # CONFIG_TASK_XACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +75,20 @@ CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -103,10 +112,15 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -152,16 +166,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -175,9 +192,10 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -234,8 +252,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -260,6 +276,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -295,6 +312,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -349,6 +367,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_MTD_DATAFLASH=m
 CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -376,13 +395,18 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -427,6 +451,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
@@ -447,6 +474,7 @@ CONFIG_NETDEVICES=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -460,7 +488,6 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -516,6 +543,7 @@ CONFIG_MOUSE_GPIO=m
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -528,6 +556,7 @@ CONFIG_MOUSE_GPIO=m
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -535,21 +564,13 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
@@ -560,27 +581,23 @@ CONFIG_I2C_GPIO=m
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -597,9 +614,27 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -619,12 +654,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -682,7 +727,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
 # CONFIG_SND_SOC is not set
 
 #
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
 #
 
 #
@@ -694,14 +743,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -714,6 +761,7 @@ CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -729,6 +777,7 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -739,17 +788,20 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
 CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+CONFIG_LEDS_ATMEL_PWM=m
 CONFIG_LEDS_GPIO=y
 
 #
@@ -758,6 +810,8 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -786,19 +840,22 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -807,11 +864,8 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 CONFIG_UIO=m
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
@@ -828,14 +882,11 @@ CONFIG_JBD=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -891,8 +942,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
@@ -943,11 +996,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -955,6 +1003,7 @@ CONFIG_KPROBES=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -965,6 +1014,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -978,12 +1028,14 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1000,6 +1052,8 @@ CONFIG_FORCED_INLINING=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_ITU_T=m

arch/avr32/configs/atstk1004_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 23:04:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:34:57 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
@@ -34,15 +34,15 @@ CONFIG_LOCALVERSION=""
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -54,24 +54,38 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 # CONFIG_BLOCK is not set
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type and features
 #
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
@@ -115,16 +129,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_CMDLINE=""
 
 #
@@ -134,20 +151,7 @@ CONFIG_CMDLINE=""
 #
 # CPU Frequency scaling
 #
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_AT32AP=y
+# CONFIG_CPU_FREQ is not set
 
 #
 # Bus options
@@ -197,8 +201,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -222,6 +224,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -255,6 +258,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -321,6 +325,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 # CONFIG_MISC_DEVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -346,6 +351,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # Character devices
 #
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -358,6 +364,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_PDC is not set
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -365,15 +372,9 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -389,9 +390,24 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -411,12 +427,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -434,8 +460,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -467,14 +493,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
@@ -485,6 +509,7 @@ CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
@@ -499,8 +524,11 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -519,15 +547,17 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -536,18 +566,14 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -588,6 +613,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -608,6 +634,8 @@ CONFIG_MAGIC_SYSRQ=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set

arch/avr32/kernel/avr32_ksyms.c

@@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64);
  */
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memcpy);
+
 EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
 
 /*
  * Userspace access stuff.
@@ -41,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(clear_user);
 EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(strnlen_user);
+
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
 

arch/avr32/kernel/init_task.c

@@ -14,7 +14,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);

arch/avr32/mach-at32ap/cpufreq.c

@@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void)
 {
 	return cpufreq_register_driver(&at32_driver);
 }
-
-arch_initcall(at32_cpufreq_init);
+late_initcall(at32_cpufreq_init);

arch/blackfin/Kconfig

@@ -479,16 +479,6 @@ comment "Memory Setup"
 
 comment "Misc"
 
-config ENET_FLASH_PIN
-	int "PF port/pin used for flash and ethernet sharing"
-	depends on (BFIN533_STAMP)
-	default  0
-	help
-	  PF port/pin used for flash and ethernet sharing to allow other PF
-	  pins to be used on other platforms without having to touch common
-	  code.
-	  For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc.
-
 choice
 	prompt "Blackfin Exception Scratch Register"
 	default BFIN_SCRATCH_REG_RETN
@@ -695,6 +685,8 @@ choice
 	prompt "Uncached SDRAM region"
 	default DMA_UNCACHED_1M
 	depends on BFIN_DMA_5XX
+config DMA_UNCACHED_4M
+	bool "Enable 4M DMA region"
 config DMA_UNCACHED_2M
 	bool "Enable 2M DMA region"
 config DMA_UNCACHED_1M

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
+# Fri May 16 10:02:29 2008
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +14,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +64,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,7 +133,6 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF52x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC32M16A2TG_75=y
 CONFIG_BFIN527_EZKIT=y
 
@@ -227,12 +218,14 @@ CONFIG_IRQ_USB_DMA=11
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -246,13 +239,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -288,12 +285,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -338,10 +337,6 @@ CONFIG_BANK_3=0xFFC0
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -357,8 +352,14 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
 #
 # Networking
 #
@@ -395,6 +396,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -421,10 +423,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -444,6 +442,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -452,14 +451,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -479,6 +475,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -542,39 +539,27 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -582,22 +567,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -611,21 +592,24 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -635,6 +619,15 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -642,15 +635,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -665,7 +650,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -697,7 +681,6 @@ CONFIG_INPUT_MISC=y
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
@@ -706,7 +689,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
+# CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -735,27 +718,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
@@ -777,21 +744,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -814,14 +784,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -829,12 +796,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -849,13 +816,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -865,6 +835,25 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -881,72 +870,133 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
 
 #
-# Enable Host or Gadget support to see Inventra options
+# Blackfin high speed USB support
 #
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# LED devices
+# USB Imaging devices
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
 
 #
-# LED drivers
+# USB port drivers
 #
 
 #
-# LED Triggers
+# USB Serial Converter support
 #
+# CONFIG_USB_SERIAL is not set
 
 #
-# InfiniBand support
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB DSL modem support
 #
 
 #
-# Real Time Clock
+# USB Gadget Support
 #
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -966,6 +1016,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -973,6 +1024,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -984,8 +1036,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -994,22 +1048,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
+# Userspace I/O
 #
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1054,7 +1095,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1080,10 +1120,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1092,10 +1134,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1115,17 +1154,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1166,21 +1200,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1188,6 +1217,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1207,11 +1237,8 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1222,6 +1249,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,7 +132,6 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF54x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
 CONFIG_IRQ_SPORT0_RX=9
@@ -169,6 +159,7 @@ CONFIG_IRQ_TIMER8=11
 CONFIG_IRQ_TIMER9=11
 CONFIG_IRQ_TIMER10=11
 CONFIG_BFIN548_EZKIT=y
+# CONFIG_BFIN548_BLUETECHNIX_CM is not set
 
 #
 # BF548 Specific Configuration
@@ -262,12 +253,14 @@ CONFIG_PINT3_ASSIGN=0x02020303
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -281,14 +274,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-# CONFIG_MEM_MT46V32M16_6T is not set
-CONFIG_MEM_MT46V32M16_5B=y
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -324,12 +320,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 CONFIG_DMA_UNCACHED_2M=y
 # CONFIG_DMA_UNCACHED_1M is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -377,10 +375,6 @@ CONFIG_EBIU_FCTLVAL=0x6
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -396,6 +390,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
@@ -439,6 +434,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -465,10 +461,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -488,6 +480,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -496,14 +489,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -523,6 +513,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -587,39 +578,27 @@ CONFIG_MTD_NAND_BF5XX_HWECC=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -627,6 +606,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -657,43 +637,35 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_PATA_PLATFORM is not set
 CONFIG_PATA_BF54X=y
-CONFIG_PATA_BF54X_DMA=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_SMC91X is not set
 CONFIG_SMSC911X=y
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -703,6 +675,15 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -710,15 +691,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -733,9 +706,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
 
@@ -758,6 +728,7 @@ CONFIG_KEYBOARD_BFIN=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -787,7 +758,6 @@ CONFIG_INPUT_MISC=y
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
@@ -796,7 +766,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
+# CONFIG_SIMPLE_GPIO is not set
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
@@ -830,27 +800,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
@@ -872,21 +826,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -909,14 +866,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -924,12 +878,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -944,13 +898,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -960,6 +917,25 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -972,23 +948,20 @@ CONFIG_HWMON=y
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -1003,18 +976,24 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-# CONFIG_FB_BFIN_7171 is not set
-# CONFIG_FB_BFIN_7393 is not set
 CONFIG_FB_BF54X_LQ043=y
 # CONFIG_FB_BFIN_T350MCQB is not set
+# CONFIG_FB_BFIN_7393 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
@@ -1064,11 +1043,22 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 
+#
+# SPI devices
+#
+
 #
 # ALSA Blackfin devices
 #
 # CONFIG_SND_BLACKFIN_AD1836 is not set
 # CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
 
 #
 # System on Chip audio support
@@ -1084,6 +1074,10 @@ CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 CONFIG_SND_BF5XX_SPORT_NUM=0
 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
 CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
+
+#
+# SoC Audio support for SuperH
+#
 CONFIG_SND_SOC_AD1980=y
 
 #
@@ -1091,72 +1085,152 @@ CONFIG_SND_SOC_AD1980=y
 #
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
 
 #
-# Enable Host or Gadget support to see Inventra options
+# USB Host Controller Drivers
 #
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# MMC/SD Card Drivers
+# USB Imaging devices
 #
-CONFIG_MMC_BLOCK=m
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
 
 #
-# MMC/SD Host Controller Drivers
+# USB port drivers
 #
-CONFIG_SDH_BFIN=m
-# CONFIG_SPI_MMC is not set
 
 #
-# LED devices
+# USB Serial Converter support
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_SERIAL is not set
 
 #
-# LED drivers
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 
 #
-# LED Triggers
+# USB DSL modem support
 #
 
 #
-# InfiniBand support
+# USB Gadget Support
 #
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# MMC/SD Card Drivers
 #
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+CONFIG_SDH_BFIN=m
+# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_SPI_MMC is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1176,6 +1250,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1183,6 +1258,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1194,8 +1270,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1204,22 +1282,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
+# Userspace I/O
 #
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1280,7 +1345,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1306,10 +1370,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1318,10 +1384,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1352,7 +1415,6 @@ CONFIG_CIFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1375,10 +1437,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1419,21 +1477,16 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1441,6 +1494,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1460,11 +1514,8 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1475,6 +1526,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m

arch/blackfin/configs/IP0X_defconfig

@@ -212,7 +212,7 @@ CONFIG_HZ=250
 #
 # Memory Setup
 #
-CONFIG_MEM_SIZE=64
+CONFIG_MAX_MEM_SIZE=64
 CONFIG_MEM_ADD_WIDTH=10
 
 #

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -90,6 +90,17 @@ int request_dma(unsigned int channel, char *device_id)
 {
 
 	pr_debug("request_dma() : BEGIN \n");
+
+#if defined(CONFIG_BF561) && ANOMALY_05000182
+	if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) {
+		if (get_cclk() > 500000000) {
+			printk(KERN_WARNING
+			       "Request IMDMA failed due to ANOMALY 05000182\n");
+			return -EFAULT;
+		}
+	}
+#endif
+
 	mutex_lock(&(dma_ch[channel].dmalock));
 
 	if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED)

arch/blackfin/kernel/bfin_gpio.c

@@ -1130,6 +1130,25 @@ void bfin_gpio_irq_prepare(unsigned gpio)
 
 #else
 
+int gpio_get_value(unsigned gpio)
+{
+	unsigned long flags;
+	int ret;
+
+	if (unlikely(get_gpio_edge(gpio))) {
+		local_irq_save(flags);
+		set_gpio_edge(gpio, 0);
+		ret = get_gpio_data(gpio);
+		set_gpio_edge(gpio, 1);
+		local_irq_restore(flags);
+
+		return ret;
+	} else
+		return get_gpio_data(gpio);
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+
 int gpio_direction_input(unsigned gpio)
 {
 	unsigned long flags;

arch/blackfin/kernel/bfin_ksyms.c

@@ -90,7 +90,9 @@ EXPORT_SYMBOL(__umodsi3);
 EXPORT_SYMBOL(outsb);
 EXPORT_SYMBOL(insb);
 EXPORT_SYMBOL(outsw);
+EXPORT_SYMBOL(outsw_8);
 EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(insw_8);
 EXPORT_SYMBOL(outsl);
 EXPORT_SYMBOL(insl);
 EXPORT_SYMBOL(insl_16);

arch/blackfin/kernel/gptimers.c

@@ -10,8 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/blackfin.h>
 #include <asm/gptimers.h>
 

arch/blackfin/kernel/init_task.c

@@ -34,7 +34,6 @@
 #include <linux/fs.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 

arch/blackfin/kernel/traps.c

@@ -364,13 +364,13 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
 	case VEC_CPLB_MHIT:
 		info.si_code = ILL_CPLB_MULHIT;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		sig = SIGSEGV;
-		printk(KERN_NOTICE "NULL pointer access (probably)\n");
-#else
-		sig = SIGILL;
-		printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+		if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START)
+			printk(KERN_NOTICE "NULL pointer access\n");
+		else
 #endif
+			printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
 		CHK_DEBUGGER_TRAP();
 		break;
 	/* 0x28 - Emulation Watchpoint, handled here */
@@ -419,13 +419,13 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	/* 0x2D - Instruction CPLB Multiple Hits, handled here */
 	case VEC_CPLB_I_MHIT:
 		info.si_code = ILL_CPLB_MULHIT;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		sig = SIGSEGV;
-		printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
-#else
-		sig = SIGILL;
-		printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+		if (saved_icplb_fault_addr < (void *)FIXED_CODE_START)
+			printk(KERN_NOTICE "Jump to NULL address\n");
+		else
 #endif
+			printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
 		CHK_DEBUGGER_TRAP();
 		break;
 	/* 0x2E - Illegal use of Supervisor Resource, handled here */

arch/blackfin/lib/checksum.c

@@ -72,9 +72,9 @@ static unsigned short do_csum(const unsigned char *buff, int len)
  *	This is a version of ip_compute_csum() optimized for IP headers,
  *	which always checksum on 4 octet boundaries.
  */
-unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
+__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl)
 {
-	return ~do_csum(iph, ihl * 4);
+	return (__force __sum16)~do_csum(iph, ihl * 4);
 }
 
 /*
@@ -89,7 +89,7 @@ unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
  *
  * it's best to have buff aligned on a 32-bit boundary
  */
-unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
+__wsum csum_partial(const void *buff, int len, __wsum sum)
 {
 	/*
 	 * Just in case we get nasty checksum data...
@@ -109,22 +109,22 @@ unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
  */
-unsigned short ip_compute_csum(const unsigned char *buff, int len)
+__sum16 ip_compute_csum(const void *buff, int len)
 {
-	return ~do_csum(buff, len);
+	return (__force __sum16)~do_csum(buff, len);
 }
 
 /*
  * copy from fs while checksumming, otherwise like csum_partial
  */
 
-unsigned int
-csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
-			    int len, int sum, int *csum_err)
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst,
+			    int len, __wsum sum, int *csum_err)
 {
 	if (csum_err)
 		*csum_err = 0;
-	memcpy(dst, src, len);
+	memcpy(dst, (__force void *)src, len);
 	return csum_partial(dst, len, sum);
 }
 
@@ -132,8 +132,7 @@ csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
  * copy from ds while checksumming, otherwise like csum_partial
  */
 
-unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
-			       int len, int sum)
+__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
 {
 	memcpy(dst, src, len);
 	return csum_partial(dst, len, sum);

arch/blackfin/lib/ins.S

@@ -7,7 +7,7 @@
  * Description:  Implementation of ins{bwl} for BlackFin processors using zero overhead loops.
  *
  * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *               Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
@@ -63,6 +63,23 @@ ENTRY(_insw)
 	RTS;
 ENDPROC(_insw)
 
+ENTRY(_insw_8)
+	P0 = R0;	/* P0 = port */
+	cli R3;
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s:  R0 = W[P0];
+		B[P1++] = R0;
+		R0 = R0 >> 8;
+		B[P1++] = R0;
+		NOP;
+.Lword8_loop_e: NOP;
+	sti R3;
+	RTS;
+ENDPROC(_insw_8)
+
 ENTRY(_insb)
 	P0 = R0;	/* P0 = port */
 	cli R3;
@@ -78,8 +95,6 @@ ENTRY(_insb)
 	RTS;
 ENDPROC(_insb)
 
-
-
 ENTRY(_insl_16)
 	P0 = R0;	/* P0 = port */
 	cli R3;

arch/blackfin/lib/outs.S

@@ -7,7 +7,7 @@
  * Description:  Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
  *
  * Modified:     Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2008 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -63,3 +63,17 @@ ENTRY(_outsb)
 .Lbyte_loop_e: B[P0] = R0;
 	RTS;
 ENDPROC(_outsb)
+
+ENTRY(_outsw_8)
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+
+	LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s: R1 = B[P1++];
+		R0 = B[P1++];
+		R0 = R0 << 8;
+		R0 = R0 + R1;
+.Lword8_loop_e: W[P0] = R0;
+	RTS;
+ENDPROC(_outsw_8)

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -647,10 +647,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF6,
+		.irq			= IRQ_PF8,
 		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num	= 0,
-		.chip_select  = 1,
+		.chip_select  = 2,
 		.controller_data = &spi_ad7877_chip_info,
 	},
 #endif
@@ -799,13 +799,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-		.type = "pcf8574_lcd",
 	},
 #endif
 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-		.type = "pcf8574_keypad",
 		.irq = IRQ_PF8,
 	},
 #endif

arch/blackfin/mach-bf533/boards/stamp.c

@@ -111,7 +111,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
 		.name   = "Bootloader",
@@ -141,13 +141,17 @@ static struct resource stamp_flash_resource[] = {
 		.end   = 0x203fffff,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = CONFIG_ENET_FLASH_PIN,
+		.start = 0x7BB07BB0,	/* AMBCTL0 setting when accessing flash */
+		.end   = 0x7BB07BB0,	/* AMBCTL1 setting when accessing flash */
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = GPIO_PF0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
 
 static struct platform_device stamp_flash_device = {
-	.name          = "BF5xx-Flash",
+	.name          = "bfin-async-flash",
 	.id            = 0,
 	.dev = {
 		.platform_data = &stamp_flash_data,
@@ -595,7 +599,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_gpios_device,
 
-#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 	&stamp_flash_device,
 #endif
 };
@@ -617,8 +621,8 @@ static int __init stamp_init(void)
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
-	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN));
-	bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN);
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+	bfin_write_FIO_FLAG_S(PF0);
 	SSYNC();
 #endif
 
@@ -636,8 +640,8 @@ arch_initcall(stamp_init);
 
 void native_machine_restart(char *cmd)
 {
-#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
-	bfin_write_FIO_INEN(~BIT_TO_SET);
-	bfin_write_FIO_DIR(BIT_TO_SET);
-	bfin_write_FIO_FLAG_C(BIT_TO_SET);
+	/* workaround pull up on cpld / flash pin not being strong enough */
+	bfin_write_FIO_INEN(~PF0);
+	bfin_write_FIO_DIR(PF0);
+	bfin_write_FIO_FLAG_C(PF0);
 }

arch/blackfin/mach-bf537/boards/Makefile

@@ -3,7 +3,7 @@
 #
 
 obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP)            += stamp.o led.o
+obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
 obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o

arch/blackfin/mach-bf537/boards/led.S

@@ -1,183 +0,0 @@
-/****************************************************
- * LED1 ---- PF6        LED2 ---- PF7               *
- * LED3 ---- PF8        LED4 ---- PF9               *
- * LED5 ---- PF10       LED6 ---- PF11              *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
-   So there is no need to save any registers before calling them.  */
-
-	.text;
-
-/* Initialize LEDs.  */
-
-ENTRY(_led_init)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R0;
-	[--SP] = R1;
-	[--SP] = R2;
-	R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
-	R2 = ~R1;
-
-	P0.H = hi(PORTF_FER);
-	P0.L = lo(PORTF_FER);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R2;
-	W[P0] = R0.L;
-	SSYNC;
-
-	P0.H = hi(PORTFIO_DIR);
-	P0.L = lo(PORTFIO_DIR);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 | R1;
-	W[P0] = R0.L;
-	SSYNC;
-
-	P0.H = hi(PORTFIO_INEN);
-	P0.L = lo(PORTFIO_INEN);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R2;
-	W[P0] = R0.L;
-	SSYNC;
-
-	R2 = [SP++];
-	R1 = [SP++];
-	R0 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
-   It expects the LED number passed through R0.  */
-
-ENTRY(_led_on)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 | R1;
-	W[P0] = R0.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged.  */
-
-ENTRY(_led_off)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	R1 = ~R1;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R1;
-	W[P0] = R0.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged.  */
-
-ENTRY(_led_toggle)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 ^ R1;
-	W[P0] = R0.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format.  */
-
-ENTRY(_led_disp_num)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	[--SP] = R2;
-	CALL _led_init;
-	R1 = 0x3f(X);
-	R0 = R0 & R1;
-	R2 = 6(X);
-	R0 <<= R2;
-	R1 <<= R2;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R2 = W[P0](Z);
-	SSYNC;
-	R1 = ~R1;
-	R2 = R2 & R1;
-	R2 = R2 | R0;
-	W[P0] = R2.L;
-	SSYNC;
-	R2 = [SP++];
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format.  */
-
-ENTRY(_led_toggle_num)
-	LINK 12;
-	[--SP] = P0;
-	[--SP] = R1;
-	[--SP] = R2;
-	CALL _led_init;
-	R1 = 0x3f(X);
-	R0 = R0 & R1;
-	R1 = 6(X);
-	R0 <<= R1;
-	P0.H = hi(PORTFIO);
-	P0.L = lo(PORTFIO);
-	R1 = W[P0](Z);
-	SSYNC;
-	R1 = R1 ^ R0;
-	W[P0] = R1.L;
-	SSYNC;
-	R2 = [SP++];
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_toggle_num, .-_led_toggle_num
-

arch/blackfin/mach-bf548/boards/Makefile

@@ -2,5 +2,5 @@
 # arch/blackfin/mach-bf548/boards/Makefile
 #
 
-obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN548_BLUETECHNIX_CM)   += cm_bf548.o

arch/blackfin/mach-bf548/boards/cm_bf548.c

@@ -684,7 +684,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 
 static int __init cm_bf548_init(void)
 {
-	printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

arch/blackfin/mach-bf548/boards/led.S

@@ -1,172 +0,0 @@
-/****************************************************
- * LED1 ---- PG6        LED2 ---- PG7               *
- * LED3 ---- PG8        LED4 ---- PG9               *
- * LED5 ---- PG10       LED6 ---- PG11              *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
-   So there is no need to save any registers before calling them.  */
-
-	.text;
-
-/* Initialize LEDs.  */
-
-ENTRY(_led_init)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R0;
-	[--SP] = R1;
-	[--SP] = R2;
-	R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
-	R2 = ~R1;
-
-	P0.H = hi(PORTG_FER);
-	P0.L = lo(PORTG_FER);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R2;
-	W[P0] = R0.L;
-	SSYNC;
-
-	P0.H = hi(PORTG_DIR_SET);
-	P0.L = lo(PORTG_DIR_SET);
-	W[P0] = R1.L;
-	SSYNC;
-
-	P0.H = hi(PORTG_INEN);
-	P0.L = lo(PORTG_INEN);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 & R2;
-	W[P0] = R0.L;
-	SSYNC;
-
-	R2 = [SP++];
-	R1 = [SP++];
-	R0 = [SP++];
-	P0 = [SP++];
-	RTS;
-	.size	_led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
-   It expects the LED number passed through R0.  */
-
-ENTRY(_led_on)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTG_SET);
-	P0.L = lo(PORTG_SET);
-	W[P0] = R1.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged.  */
-
-ENTRY(_led_off)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTG_CLEAR);
-	P0.L = lo(PORTG_CLEAR);
-	W[P0] = R1.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged.  */
-
-ENTRY(_led_toggle)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	CALL _led_init;
-	R1 = 1;
-	R0 += 5;
-	R1 <<= R0;
-	P0.H = hi(PORTG);
-	P0.L = lo(PORTG);
-	R0 = W[P0](Z);
-	SSYNC;
-	R0 = R0 ^ R1;
-	W[P0] = R0.L;
-	SSYNC;
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format.  */
-
-ENTRY(_led_disp_num)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	[--SP] = R2;
-	CALL _led_init;
-	R1 = 0x3f(X);
-	R0 = R0 & R1;
-	R2 = 6(X);
-	R0 <<= R2;
-	R1 <<= R2;
-	P0.H = hi(PORTG);
-	P0.L = lo(PORTG);
-	R2 = W[P0](Z);
-	SSYNC;
-	R1 = ~R1;
-	R2 = R2 & R1;
-	R2 = R2 | R0;
-	W[P0] = R2.L;
-	SSYNC;
-	R2 = [SP++];
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format.  */
-
-ENTRY(_led_toggle_num)
-	LINK 0;
-	[--SP] = P0;
-	[--SP] = R1;
-	[--SP] = R2;
-	CALL _led_init;
-	R1 = 0x3f(X);
-	R0 = R0 & R1;
-	R1 = 6(X);
-	R0 <<= R1;
-	P0.H = hi(PORTG);
-	P0.L = lo(PORTG);
-	R1 = W[P0](Z);
-	SSYNC;
-	R1 = R1 ^ R0;
-	W[P0] = R1.L;
-	SSYNC;
-	R2 = [SP++];
-	R1 = [SP++];
-	P0 = [SP++];
-	UNLINK;
-	RTS;
-	.size	_led_toggle_num, .-_led_toggle_num
-

arch/cris/kernel/process.c

@@ -38,7 +38,6 @@
  */
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);

arch/frv/kernel/init_task.c

@@ -11,7 +11,6 @@
 
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);

arch/frv/mm/init.c

@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <linux/bootmem.h>
 #include <linux/highmem.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 #include <asm/segment.h>
@@ -56,7 +57,9 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
  */
 static unsigned long empty_bad_page_table;
 static unsigned long empty_bad_page;
+
 unsigned long empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
 
 /*****************************************************************************/
 /*

arch/h8300/kernel/init_task.c

@@ -13,7 +13,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);

arch/ia64/Kconfig

@@ -135,6 +135,7 @@ config IA64_GENERIC
 	  HP-zx1/sx1000		For HP systems
 	  HP-zx1/sx1000+swiotlb	For HP systems with (broken) DMA-constrained devices.
 	  SGI-SN2		For SGI Altix systems
+	  SGI-UV		For SGI UV systems
 	  Ski-simulator		For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
 
 	  If you don't know what to do, choose "generic".
@@ -170,6 +171,18 @@ config IA64_SGI_SN2
 	  to select this option.  If in doubt, select ia64 generic support
 	  instead.
 
+config IA64_SGI_UV`
+	bool "SGI-UV`"
+	select NUMA
+	select ACPI_NUMA
+	select SWIOTLB
+	help
+	  Selecting this option will optimize the kernel for use on UV based
+	  systems, but the resulting kernel binary will not run on other
+	  types of ia64 systems.  If you have an SGI UV system, it's safe
+	  to select this option.  If in doubt, select ia64 generic support
+	  instead.
+
 config IA64_HP_SIM
 	bool "Ski-simulator"
 	select SWIOTLB

arch/ia64/Makefile

@@ -63,7 +63,7 @@ drivers-$(CONFIG_PCI)		+= arch/ia64/pci/
 drivers-$(CONFIG_IA64_HP_SIM)	+= arch/ia64/hp/sim/
 drivers-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/
 drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
-drivers-$(CONFIG_IA64_GENERIC)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/
+drivers-$(CONFIG_IA64_GENERIC)	+= arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/ arch/ia64/uv/
 drivers-$(CONFIG_OPROFILE)	+= arch/ia64/oprofile/
 
 boot := arch/ia64/hp/sim/boot

arch/ia64/ia32/ia32_support.c

@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <linux/personality.h>
 #include <linux/sched.h>
 
 #include <asm/intrinsics.h>
@@ -29,7 +28,6 @@
 
 extern int die_if_kernel (char *str, struct pt_regs *regs, long err);
 
-struct exec_domain ia32_exec_domain;
 struct page *ia32_shared_page[NR_CPUS];
 unsigned long *ia32_boot_gdt;
 unsigned long *cpu_gdt_table[NR_CPUS];
@@ -240,14 +238,6 @@ ia32_cpu_init (void)
 static int __init
 ia32_init (void)
 {
-	ia32_exec_domain.name = "Linux/x86";
-	ia32_exec_domain.handler = NULL;
-	ia32_exec_domain.pers_low = PER_LINUX32;
-	ia32_exec_domain.pers_high = PER_LINUX32;
-	ia32_exec_domain.signal_map = default_exec_domain.signal_map;
-	ia32_exec_domain.signal_invmap = default_exec_domain.signal_invmap;
-	register_exec_domain(&ia32_exec_domain);
-
 #if PAGE_SHIFT > IA32_PAGE_SHIFT
 	{
 		extern struct kmem_cache *ia64_partial_page_cachep;

arch/ia64/kernel/acpi.c

@@ -117,7 +117,10 @@ acpi_get_sysname(void)
 	if (!strcmp(hdr->oem_id, "HP")) {
 		return "hpzx1";
 	} else if (!strcmp(hdr->oem_id, "SGI")) {
-		return "sn2";
+		if (!strcmp(hdr->oem_table_id + 4, "UV"))
+			return "uv";
+		else
+			return "sn2";
 	}
 
 	return "dig";
@@ -130,6 +133,8 @@ acpi_get_sysname(void)
 	return "hpzx1_swiotlb";
 # elif defined (CONFIG_IA64_SGI_SN2)
 	return "sn2";
+# elif defined (CONFIG_IA64_SGI_UV)
+	return "uv";
 # elif defined (CONFIG_IA64_DIG)
 	return "dig";
 # else
@@ -622,6 +627,9 @@ void acpi_unregister_gsi(u32 gsi)
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
 		return;
 
+	if (has_8259 && gsi < 16)
+		return;
+
 	iosapic_unregister_intr(gsi);
 }
 

arch/ia64/kernel/entry.S

@@ -1156,6 +1156,9 @@ skip_rbs_switch:
 	 *	r31 = current->thread_info->flags
 	 * On exit:
 	 *	p6 = TRUE if work-pending-check needs to be redone
+	 *
+	 * Interrupts are disabled on entry, reenabled depend on work, and
+	 * disabled on exit.
 	 */
 .work_pending_syscall:
 	add r2=-8,r2
@@ -1164,16 +1167,16 @@ skip_rbs_switch:
 	st8 [r2]=r8
 	st8 [r3]=r10
 .work_pending:
-	tbit.z p6,p0=r31,TIF_NEED_RESCHED		// current_thread_info()->need_resched==0?
+	tbit.z p6,p0=r31,TIF_NEED_RESCHED	// is resched not needed?
 (p6)	br.cond.sptk.few .notify
 #ifdef CONFIG_PREEMPT
 (pKStk) dep r21=-1,r0,PREEMPT_ACTIVE_BIT,1
 	;;
 (pKStk) st4 [r20]=r21
-	ssm psr.i		// enable interrupts
 #endif
+	ssm psr.i		// enable interrupts
 	br.call.spnt.many rp=schedule
-.ret9:	cmp.eq p6,p0=r0,r0				// p6 <- 1
+.ret9:	cmp.eq p6,p0=r0,r0	// p6 <- 1 (re-check)
 	rsm psr.i		// disable interrupts
 	;;
 #ifdef CONFIG_PREEMPT
@@ -1182,13 +1185,13 @@ skip_rbs_switch:
 (pKStk)	st4 [r20]=r0		// preempt_count() <- 0
 #endif
 (pLvSys)br.cond.sptk.few  .work_pending_syscall_end
-	br.cond.sptk.many .work_processed_kernel	// re-check
+	br.cond.sptk.many .work_processed_kernel
 
 .notify:
 (pUStk)	br.call.spnt.many rp=notify_resume_user
-.ret10:	cmp.ne p6,p0=r0,r0				// p6 <- 0
+.ret10:	cmp.ne p6,p0=r0,r0	// p6 <- 0 (don't re-check)
 (pLvSys)br.cond.sptk.few  .work_pending_syscall_end
-	br.cond.sptk.many .work_processed_kernel	// don't re-check
+	br.cond.sptk.many .work_processed_kernel
 
 .work_pending_syscall_end:
 	adds r2=PT(R8)+16,r12
@@ -1196,7 +1199,7 @@ skip_rbs_switch:
 	;;
 	ld8 r8=[r2]
 	ld8 r10=[r3]
-	br.cond.sptk.many .work_processed_syscall	// re-check
+	br.cond.sptk.many .work_processed_syscall
 
 END(ia64_leave_kernel)
 
@@ -1234,9 +1237,12 @@ GLOBAL_ENTRY(ia64_invoke_schedule_tail)
 END(ia64_invoke_schedule_tail)
 
 	/*
-	 * Setup stack and call do_notify_resume_user().  Note that pSys and pNonSys need to
-	 * be set up by the caller.  We declare 8 input registers so the system call
-	 * args get preserved, in case we need to restart a system call.
+	 * Setup stack and call do_notify_resume_user(), keeping interrupts
+	 * disabled.
+	 *
+	 * Note that pSys and pNonSys need to be set up by the caller.
+	 * We declare 8 input registers so the system call args get preserved,
+	 * in case we need to restart a system call.
 	 */
 ENTRY(notify_resume_user)
 	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)

arch/ia64/kernel/init_task.c

@@ -18,7 +18,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);

arch/ia64/kernel/ivt.S

@@ -1076,48 +1076,6 @@ END(ia64_syscall_setup)
 	DBG_FAULT(15)
 	FAULT(15)
 
-	/*
-	 * Squatting in this space ...
-	 *
-	 * This special case dispatcher for illegal operation faults allows preserved
-	 * registers to be modified through a callback function (asm only) that is handed
-	 * back from the fault handler in r8. Up to three arguments can be passed to the
-	 * callback function by returning an aggregate with the callback as its first
-	 * element, followed by the arguments.
-	 */
-ENTRY(dispatch_illegal_op_fault)
-	.prologue
-	.body
-	SAVE_MIN_WITH_COVER
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i		// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i	// restore psr.i
-	adds r3=8,r2	// set up second base pointer for SAVE_REST
-	;;
-	alloc r14=ar.pfs,0,0,1,0	// must be first in insn group
-	mov out0=ar.ec
-	;;
-	SAVE_REST
-	PT_REGS_UNWIND_INFO(0)
-	;;
-	br.call.sptk.many rp=ia64_illegal_op_fault
-.ret0:	;;
-	alloc r14=ar.pfs,0,0,3,0	// must be first in insn group
-	mov out0=r9
-	mov out1=r10
-	mov out2=r11
-	movl r15=ia64_leave_kernel
-	;;
-	mov rp=r15
-	mov b6=r8
-	;;
-	cmp.ne p6,p0=0,r8
-(p6)	br.call.dpnt.many b6=b6		// call returns to ia64_leave_kernel
-	br.sptk.many ia64_leave_kernel
-END(dispatch_illegal_op_fault)
-
 	.org ia64_ivt+0x4000
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4000 Entry 16 (size 64 bundles) Reserved
@@ -1715,6 +1673,48 @@ END(ia32_interrupt)
 	DBG_FAULT(67)
 	FAULT(67)
 
+	/*
+	 * Squatting in this space ...
+	 *
+	 * This special case dispatcher for illegal operation faults allows preserved
+	 * registers to be modified through a callback function (asm only) that is handed
+	 * back from the fault handler in r8. Up to three arguments can be passed to the
+	 * callback function by returning an aggregate with the callback as its first
+	 * element, followed by the arguments.
+	 */
+ENTRY(dispatch_illegal_op_fault)
+	.prologue
+	.body
+	SAVE_MIN_WITH_COVER
+	ssm psr.ic | PSR_DEFAULT_BITS
+	;;
+	srlz.i		// guarantee that interruption collection is on
+	;;
+(p15)	ssm psr.i	// restore psr.i
+	adds r3=8,r2	// set up second base pointer for SAVE_REST
+	;;
+	alloc r14=ar.pfs,0,0,1,0	// must be first in insn group
+	mov out0=ar.ec
+	;;
+	SAVE_REST
+	PT_REGS_UNWIND_INFO(0)
+	;;
+	br.call.sptk.many rp=ia64_illegal_op_fault
+.ret0:	;;
+	alloc r14=ar.pfs,0,0,3,0	// must be first in insn group
+	mov out0=r9
+	mov out1=r10
+	mov out2=r11
+	movl r15=ia64_leave_kernel
+	;;
+	mov rp=r15
+	mov b6=r8
+	;;
+	cmp.ne p6,p0=0,r8
+(p6)	br.call.dpnt.many b6=b6		// call returns to ia64_leave_kernel
+	br.sptk.many ia64_leave_kernel
+END(dispatch_illegal_op_fault)
+
 #ifdef CONFIG_IA32_SUPPORT
 
 	/*

arch/ia64/kernel/minstate.h

@@ -15,6 +15,9 @@
 #define ACCOUNT_SYS_ENTER
 #endif
 
+.section ".data.patch.rse", "a"
+.previous
+
 /*
  * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
  * the minimum state necessary that allows us to turn psr.ic back
@@ -40,7 +43,7 @@
  * Note that psr.ic is NOT turned on by this macro.  This is so that
  * we can pass interruption state as arguments to a handler.
  */
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA)							\
+#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND)						\
 	mov r16=IA64_KR(CURRENT);	/* M */							\
 	mov r27=ar.rsc;			/* M */							\
 	mov r20=r1;			/* A */							\
@@ -87,6 +90,7 @@
 	tbit.nz p15,p0=r29,IA64_PSR_I_BIT;							\
 	mov r29=b0										\
 	;;											\
+	WORKAROUND;										\
 	adds r16=PT(R8),r1;	/* initialize first base pointer */				\
 	adds r17=PT(R9),r1;	/* initialize second base pointer */				\
 (pKStk)	mov r18=r0;		/* make sure r18 isn't NaT */					\
@@ -206,6 +210,40 @@
 	st8 [r25]=r10;      	/* ar.ssd */	\
 	;;
 
-#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(cover, mov r30=cr.ifs,)
-#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19)
-#define SAVE_MIN		DO_SAVE_MIN(     , mov r30=r0, )
+#define RSE_WORKAROUND				\
+(pUStk) extr.u r17=r18,3,6;			\
+(pUStk)	sub r16=r18,r22;			\
+[1:](pKStk)	br.cond.sptk.many 1f;		\
+	.xdata4 ".data.patch.rse",1b-.		\
+	;;					\
+	cmp.ge p6,p7 = 33,r17;			\
+	;;					\
+(p6)	mov r17=0x310;				\
+(p7)	mov r17=0x308;				\
+	;;					\
+	cmp.leu p1,p0=r16,r17;			\
+(p1)	br.cond.sptk.many 1f;			\
+	dep.z r17=r26,0,62;			\
+	movl r16=2f;				\
+	;;					\
+	mov ar.pfs=r17;				\
+	dep r27=r0,r27,16,14;			\
+	mov b0=r16;				\
+	;;					\
+	br.ret.sptk b0;				\
+	;;					\
+2:						\
+	mov ar.rsc=r0				\
+	;;					\
+	flushrs;				\
+	;;					\
+	mov ar.bspstore=r22			\
+	;;					\
+	mov r18=ar.bsp;				\
+	;;					\
+1:						\
+	.pred.rel "mutex", pKStk, pUStk
+
+#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN			DO_SAVE_MIN(     , mov r30=r0, , )

arch/ia64/kernel/palinfo.c

@@ -900,12 +900,6 @@ static void
 palinfo_smp_call(void *info)
 {
 	palinfo_smp_data_t *data = (palinfo_smp_data_t *)info;
-	if (data == NULL) {
-		printk(KERN_ERR "palinfo: data pointer is NULL\n");
-		data->ret = 0; /* no output */
-		return;
-	}
-	/* does this actual call */
 	data->ret = (*data->func)(data->page);
 }
 

arch/ia64/kernel/patch.c

@@ -115,6 +115,29 @@ ia64_patch_vtop (unsigned long start, unsigned long end)
 	ia64_srlz_i();
 }
 
+/*
+ * Disable the RSE workaround by turning the conditional branch
+ * that we tagged in each place the workaround was used into an
+ * unconditional branch.
+ */
+void __init
+ia64_patch_rse (unsigned long start, unsigned long end)
+{
+	s32 *offp = (s32 *) start;
+	u64 ip, *b;
+
+	while (offp < (s32 *) end) {
+		ip = (u64) offp + *offp;
+
+		b = (u64 *)(ip & -16);
+		b[1] &= ~0xf800000L;
+		ia64_fc((void *) ip);
+		++offp;
+	}
+	ia64_sync_i();
+	ia64_srlz_i();
+}
+
 void __init
 ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
 {

arch/ia64/kernel/perfmon.c

@@ -5013,12 +5013,13 @@ pfm_context_force_terminate(pfm_context_t *ctx, struct pt_regs *regs)
 }
 
 static int pfm_ovfl_notify_user(pfm_context_t *ctx, unsigned long ovfl_pmds);
+
  /*
   * pfm_handle_work() can be called with interrupts enabled
   * (TIF_NEED_RESCHED) or disabled. The down_interruptible
   * call may sleep, therefore we must re-enable interrupts
   * to avoid deadlocks. It is safe to do so because this function
-  * is called ONLY when returning to user level (PUStk=1), in which case
+  * is called ONLY when returning to user level (pUStk=1), in which case
   * there is no risk of kernel stack overflow due to deep
   * interrupt nesting.
   */
@@ -5034,7 +5035,8 @@ pfm_handle_work(void)
 
 	ctx = PFM_GET_CTX(current);
 	if (ctx == NULL) {
-		printk(KERN_ERR "perfmon: [%d] has no PFM context\n", task_pid_nr(current));
+		printk(KERN_ERR "perfmon: [%d] has no PFM context\n",
+			task_pid_nr(current));
 		return;
 	}
 
@@ -5058,11 +5060,12 @@ pfm_handle_work(void)
 	/*
 	 * must be done before we check for simple-reset mode
 	 */
-	if (ctx->ctx_fl_going_zombie || ctx->ctx_state == PFM_CTX_ZOMBIE) goto do_zombie;
-
+	if (ctx->ctx_fl_going_zombie || ctx->ctx_state == PFM_CTX_ZOMBIE)
+		goto do_zombie;
 
 	//if (CTX_OVFL_NOBLOCK(ctx)) goto skip_blocking;
-	if (reason == PFM_TRAP_REASON_RESET) goto skip_blocking;
+	if (reason == PFM_TRAP_REASON_RESET)
+		goto skip_blocking;
 
 	/*
 	 * restore interrupt mask to what it was on entry.
@@ -5110,7 +5113,8 @@ do_zombie:
 	/*
 	 * in case of interruption of down() we don't restart anything
 	 */
-	if (ret < 0) goto nothing_to_do;
+	if (ret < 0)
+		goto nothing_to_do;
 
 skip_blocking:
 	pfm_resume_after_ovfl(ctx, ovfl_regs, regs);

arch/ia64/kernel/process.c

@@ -167,11 +167,18 @@ void tsk_clear_notify_resume(struct task_struct *tsk)
 	clear_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME);
 }
 
+/*
+ * do_notify_resume_user():
+ *	Called from notify_resume_user at entry.S, with interrupts disabled.
+ */
 void
-do_notify_resume_user (sigset_t *unused, struct sigscratch *scr, long in_syscall)
+do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 {
 	if (fsys_mode(current, &scr->pt)) {
-		/* defer signal-handling etc. until we return to privilege-level 0.  */
+		/*
+		 * defer signal-handling etc. until we return to
+		 * privilege-level 0.
+		 */
 		if (!ia64_psr(&scr->pt)->lp)
 			ia64_psr(&scr->pt)->lp = 1;
 		return;
@@ -179,16 +186,26 @@ do_notify_resume_user (sigset_t *unused, struct sigscratch *scr, long in_syscall
 
 #ifdef CONFIG_PERFMON
 	if (current->thread.pfm_needs_checking)
+		/*
+		 * Note: pfm_handle_work() allow us to call it with interrupts
+		 * disabled, and may enable interrupts within the function.
+		 */
 		pfm_handle_work();
 #endif
 
 	/* deal with pending signal delivery */
-	if (test_thread_flag(TIF_SIGPENDING))
+	if (test_thread_flag(TIF_SIGPENDING)) {
+		local_irq_enable();	/* force interrupt enable */
 		ia64_do_signal(scr, in_syscall);
+	}
 
 	/* copy user rbs to kernel rbs */
-	if (unlikely(test_thread_flag(TIF_RESTORE_RSE)))
+	if (unlikely(test_thread_flag(TIF_RESTORE_RSE))) {
+		local_irq_enable();	/* force interrupt enable */
 		ia64_sync_krbs();
+	}
+
+	local_irq_disable();	/* force interrupt disable */
 }
 
 static int pal_halt        = 1;

arch/ia64/kernel/sal.c

@@ -229,6 +229,14 @@ static void __init sal_desc_ap_wakeup(void *p) { }
  */
 static int sal_cache_flush_drops_interrupts;
 
+static int __init
+force_pal_cache_flush(char *str)
+{
+	sal_cache_flush_drops_interrupts = 1;
+	return 0;
+}
+early_param("force_pal_cache_flush", force_pal_cache_flush);
+
 void __init
 check_sal_cache_flush (void)
 {
@@ -237,6 +245,9 @@ check_sal_cache_flush (void)
 	u64 vector, cache_type = 3;
 	struct ia64_sal_retval isrv;
 
+	if (sal_cache_flush_drops_interrupts)
+		return;
+
 	cpu = get_cpu();
 	local_irq_save(flags);
 

arch/ia64/kernel/setup.c

@@ -239,6 +239,25 @@ __initcall(register_memory);
 
 
 #ifdef CONFIG_KEXEC
+
+/*
+ * This function checks if the reserved crashkernel is allowed on the specific
+ * IA64 machine flavour. Machines without an IO TLB use swiotlb and require
+ * some memory below 4 GB (i.e. in 32 bit area), see the implementation of
+ * lib/swiotlb.c. The hpzx1 architecture has an IO TLB but cannot use that
+ * in kdump case. See the comment in sba_init() in sba_iommu.c.
+ *
+ * So, the only machvec that really supports loading the kdump kernel
+ * over 4 GB is "sn2".
+ */
+static int __init check_crashkernel_memory(unsigned long pbase, size_t size)
+{
+	if (ia64_platform_is("sn2") || ia64_platform_is("uv"))
+		return 1;
+	else
+		return pbase < (1UL << 32);
+}
+
 static void __init setup_crashkernel(unsigned long total, int *n)
 {
 	unsigned long long base = 0, size = 0;
@@ -252,6 +271,16 @@ static void __init setup_crashkernel(unsigned long total, int *n)
 			base = kdump_find_rsvd_region(size,
 					rsvd_region, *n);
 		}
+
+		if (!check_crashkernel_memory(base, size)) {
+			pr_warning("crashkernel: There would be kdump memory "
+				"at %ld GB but this is unusable because it "
+				"must\nbe below 4 GB. Change the memory "
+				"configuration of the machine.\n",
+				(unsigned long)(base >> 30));
+			return;
+		}
+
 		if (base != ~0UL) {
 			printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
 					"for crashkernel (System RAM: %ldMB)\n",
@@ -531,6 +560,17 @@ setup_arch (char **cmdline_p)
 	/* process SAL system table: */
 	ia64_sal_init(__va(efi.sal_systab));
 
+#ifdef CONFIG_ITANIUM
+	ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+#else
+	{
+		u64 num_phys_stacked;
+
+		if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96)
+			ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+	}
+#endif
+
 #ifdef CONFIG_SMP
 	cpu_physical_id(0) = hard_smp_processor_id();
 #endif

arch/ia64/kernel/vmlinux.lds.S

@@ -156,6 +156,13 @@ SECTIONS
 	  __end___vtop_patchlist = .;
 	}
 
+  .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
+	{
+	  __start___rse_patchlist = .;
+	  *(.data.patch.rse)
+	  __end___rse_patchlist = .;
+	}
+
   .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
 	{
 	  __start___mckinley_e9_bundles = .;

arch/ia64/kvm/Makefile

@@ -7,7 +7,6 @@ offsets-file := asm-offsets.h
 always  := $(offsets-file)
 targets := $(offsets-file)
 targets += arch/ia64/kvm/asm-offsets.s
-clean-files := $(addprefix $(objtree)/,$(targets) $(obj)/memcpy.S $(obj)/memset.S)
 
 # Default sed regexp - multiline due to syntax constraints
 define sed-y
@@ -54,5 +53,5 @@ EXTRA_CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127
 kvm-intel-objs = vmm.o vmm_ivt.o trampoline.o vcpu.o optvfault.o mmio.o \
 	vtlb.o process.o
 #Add link memcpy and memset to avoid possible structure assignment error
-kvm-intel-objs += ../lib/memset.o ../lib/memcpy.o
+kvm-intel-objs += memcpy.o memset.o
 obj-$(CONFIG_KVM_INTEL) += kvm-intel.o

arch/ia64/kvm/memcpy.S

@@ -0,0 +1 @@
+#include "../lib/memcpy.S"

arch/ia64/kvm/memset.S

@@ -0,0 +1 @@
+#include "../lib/memset.S"

arch/ia64/mm/init.c

@@ -719,3 +719,28 @@ out:
 EXPORT_SYMBOL_GPL(remove_memory);
 #endif /* CONFIG_MEMORY_HOTREMOVE */
 #endif
+
+/*
+ * Even when CONFIG_IA32_SUPPORT is not enabled it is
+ * useful to have the Linux/x86 domain registered to
+ * avoid an attempted module load when emulators call
+ * personality(PER_LINUX32). This saves several milliseconds
+ * on each such call.
+ */
+static struct exec_domain ia32_exec_domain;
+
+static int __init
+per_linux32_init(void)
+{
+	ia32_exec_domain.name = "Linux/x86";
+	ia32_exec_domain.handler = NULL;
+	ia32_exec_domain.pers_low = PER_LINUX32;
+	ia32_exec_domain.pers_high = PER_LINUX32;
+	ia32_exec_domain.signal_map = default_exec_domain.signal_map;
+	ia32_exec_domain.signal_invmap = default_exec_domain.signal_invmap;
+	register_exec_domain(&ia32_exec_domain);
+
+	return 0;
+}
+
+__initcall(per_linux32_init);

arch/ia64/uv/Makefile

@@ -0,0 +1,12 @@
+# arch/ia64/uv/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+#
+# Makefile for the sn uv subplatform
+#
+
+obj-y += kernel/

arch/ia64/uv/kernel/Makefile

@@ -0,0 +1,13 @@
+# arch/ia64/uv/kernel/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+#
+
+EXTRA_CFLAGS += -Iarch/ia64/sn/include
+
+obj-y				+= setup.o
+obj-$(CONFIG_IA64_GENERIC)      += machvec.o

arch/ia64/uv/kernel/machvec.c

@@ -0,0 +1,11 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#define MACHVEC_PLATFORM_NAME	uv
+#define MACHVEC_PLATFORM_HEADER	<asm/machvec_uv.h>
+#include <asm/machvec_init.h>

arch/ia64/uv/kernel/setup.c

@@ -0,0 +1,98 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Core Functions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <asm/sn/simulator.h>
+#include <asm/uv/uv_mmrs.h>
+#include <asm/uv/uv_hub.h>
+
+DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+
+
+struct redir_addr {
+	unsigned long redirect;
+	unsigned long alias;
+};
+
+#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
+
+static __initdata struct redir_addr redir_addrs[] = {
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+};
+
+static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
+{
+	union uvh_si_alias0_overlay_config_u alias;
+	union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
+		alias.v = uv_read_local_mmr(redir_addrs[i].alias);
+		if (alias.s.base == 0) {
+			*size = (1UL << alias.s.m_alias);
+			redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
+			*base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
+			return;
+		}
+	}
+	BUG();
+}
+
+void __init uv_setup(char **cmdline_p)
+{
+	union uvh_si_addr_map_config_u m_n_config;
+	union uvh_node_id_u node_id;
+	unsigned long gnode_upper;
+	int nid, cpu, m_val, n_val;
+	unsigned long mmr_base, lowmem_redir_base, lowmem_redir_size;
+
+	if (IS_MEDUSA()) {
+		lowmem_redir_base = 0;
+		lowmem_redir_size = 0;
+		node_id.v = 0;
+		m_n_config.s.m_skt = 37;
+		m_n_config.s.n_skt = 0;
+		mmr_base = 0;
+	} else {
+		get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
+		node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+		m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+		mmr_base =
+			uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
+				~UV_MMR_ENABLE;
+	}
+
+	m_val = m_n_config.s.m_skt;
+	n_val = m_n_config.s.n_skt;
+	printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
+
+	gnode_upper = (((unsigned long)node_id.s.node_id) &
+		       ~((1 << n_val) - 1)) << m_val;
+
+	for_each_present_cpu(cpu) {
+		nid = cpu_to_node(cpu);
+		uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
+		uv_cpu_hub_info(cpu)->lowmem_remap_top =
+			lowmem_redir_base + lowmem_redir_size;
+		uv_cpu_hub_info(cpu)->m_val = m_val;
+		uv_cpu_hub_info(cpu)->n_val = m_val;
+		uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) -1;
+		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
+		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
+		uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
+		printk(KERN_DEBUG "UV cpu %d, nid %d\n", cpu, nid);
+	}
+}
+

arch/m32r/kernel/init_task.c

@@ -12,7 +12,6 @@
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);

arch/m68k/Kconfig

@@ -44,7 +44,7 @@ config GENERIC_IOMAP
 
 config ARCH_MAY_HAVE_PC_FDC
 	bool
-	depends on Q40 || (BROKEN && SUN3X)
+	depends on BROKEN && (Q40 || SUN3X)
 	default y
 
 config NO_IOPORT
@@ -539,13 +539,6 @@ config AMIGA_BUILTIN_SERIAL
 
 	  To compile this driver as a module, choose M here.
 
-config WHIPPET_SERIAL
-	tristate "Hisoft Whippet PCMCIA serial support"
-	depends on AMIGA_PCMCIA
-	help
-	  HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
-	  is no listing for the Whippet in their Amiga section.
-
 config MULTIFACE_III_TTY
 	tristate "Multiface Card III serial support"
 	depends on AMIGA