ath9k_hw: move LowPower array writes to ar9003_hw_configpcipowersave()

The LowPower array writes disables the PLL when ASPM is enabled.
The host driver makes quite a few calls to ath9k_hw_configpcipowersave()
and these same calls also need to ensure the PLL is off when they issue
it.

Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Madhan Jaganathan <madhan.jaganathan@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar9003_hw.c

@@ -298,6 +298,20 @@ static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
 		else
 			REG_WRITE(ah, AR_WA, ah->WARegVal);
 	}
+
+	/*
+	 * Configire PCIE after Ini init. SERDES values now come from ini file
+	 * This enables PCIe low power mode.
+	 */
+	if (AR_SREV_9300_20_OR_LATER(ah)) {
+		unsigned int i;
+
+		for (i = 0; i < ah->iniPcieSerdesLowPower.ia_rows; i++) {
+			REG_WRITE(ah,
+				  INI_RA(&ah->iniPcieSerdesLowPower, i, 0),
+				  INI_RA(&ah->iniPcieSerdesLowPower, i, 1));
+		}
+	}
 }
 
 /* Sets up the AR9003 hardware familiy callbacks */

drivers/net/wireless/ath/ath9k/hw.c

@@ -570,20 +570,6 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 
 	ath9k_hw_init_mode_regs(ah);
 
-	/*
-	 * Configire PCIE after Ini init. SERDES values now come from ini file
-	 * This enables PCIe low power mode.
-	 */
-	if (AR_SREV_9300_20_OR_LATER(ah)) {
-		unsigned int i;
-
-		for (i = 0; i < ah->iniPcieSerdesLowPower.ia_rows; i++) {
-			REG_WRITE(ah,
-				  INI_RA(&ah->iniPcieSerdesLowPower, i, 0),
-				  INI_RA(&ah->iniPcieSerdesLowPower, i, 1));
-		}
-	}
-
 	/*
 	 * Read back AR_WA into a permanent copy and set bits 14 and 17.
 	 * We need to do this to avoid RMW of this register. We cannot