Merge commit 'v2.6.33' into tracing/core

Conflicts:
	scripts/recordmcount.pl

Merge reason: Merge up to v2.6.33.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

.gitignore

@@ -37,6 +37,7 @@ modules.builtin
 tags
 TAGS
 vmlinux
+vmlinuz
 System.map
 Module.markers
 Module.symvers

Documentation/ABI/testing/ima_policy

@@ -20,7 +20,7 @@ Description:
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
-		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
@@ -40,11 +40,11 @@ Description:
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
-			measure func=INODE_PERM mask=MAY_READ uid=0
+			measure func=FILE_CHECK mask=MAY_READ uid=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in inode_permission.
+		open for read by root in do_filp_open.
 
 		Examples of LSM specific definitions:
 
@@ -54,8 +54,8 @@ Description:
 
 			dont_measure obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
-			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
-			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 
 		Smack:
-			measure subj_user=_ func=INODE_PERM mask=MAY_READ
+			measure subj_user=_ func=FILE_CHECK mask=MAY_READ

Documentation/cpu-freq/governors.txt

@@ -145,8 +145,8 @@ show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT.
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
 whether it should increase the frequency.  For example when it is set
-to its default value of '80' it means that between the checking
-intervals the CPU needs to be on average more than 80% in use to then
+to its default value of '95' it means that between the checking
+intervals the CPU needs to be on average more than 95% in use to then
 decide that the CPU frequency needs to be increased.  
 
 ignore_nice_load: this parameter takes a value of '0' or '1'. When

Documentation/fault-injection/fault-injection.txt

@@ -143,8 +143,8 @@ o provide a way to configure fault attributes
   failslab, fail_page_alloc, and fail_make_request use this way.
   Helper functions:
 
-	init_fault_attr_entries(entries, attr, name);
-	void cleanup_fault_attr_entries(entries);
+	init_fault_attr_dentries(entries, attr, name);
+	void cleanup_fault_attr_dentries(entries);
 
 - module parameters
 

Documentation/feature-removal-schedule.txt

@@ -493,3 +493,52 @@ Why:	These two features use non-standard interfaces. There are the
 Who:	Corentin Chary <corentin.chary@gmail.com>
 
 ----------------------------
+
+What:	usbvideo quickcam_messenger driver
+When:	2.6.35
+Files:	drivers/media/video/usbvideo/quickcam_messenger.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_stv06xx
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	ov511 v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/ov511.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_ov519
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	w9968cf v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/w9968cf*.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_ov519
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	ovcamchip sensor framework
+When:	2.6.35
+Files:	drivers/media/video/ovcamchip/*
+Why:	Only used by obsoleted v4l1 drivers
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	stv680 v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/stv680.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_stv0680
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	zc0301 v4l driver
+When:	2.6.35
+Files:	drivers/media/video/zc0301/*
+Why:	Duplicate functionality with the gspca_zc3xx driver, zc0301 only
+	supports 2 USB-ID's (because it only supports a limited set of
+	sensors) wich are also supported by the gspca_zc3xx driver
+	(which supports 53 USB-ID's in total)
+Who:	Hans de Goede <hdegoede@redhat.com>

Documentation/filesystems/proc.txt

@@ -177,7 +177,6 @@ read the file /proc/PID/status:
   CapBnd: ffffffffffffffff
   voluntary_ctxt_switches:        0
   nonvoluntary_ctxt_switches:     1
-  Stack usage:    12 kB
 
 This shows you nearly the same information you would get if you viewed it with
 the ps  command.  In  fact,  ps  uses  the  proc  file  system  to  obtain its
@@ -231,7 +230,6 @@ Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
  Mems_allowed_list           Same as previous, but in "list format"
  voluntary_ctxt_switches     number of voluntary context switches
  nonvoluntary_ctxt_switches  number of non voluntary context switches
- Stack usage:                stack usage high water mark (round up to page size)
 ..............................................................................
 
 Table 1-3: Contents of the statm files (as of 2.6.8-rc3)

Documentation/hwmon/amc6821

@@ -0,0 +1,102 @@
+Kernel driver amc6821
+=====================
+
+Supported chips:
+	Texas Instruments AMC6821
+	Prefix: 'amc6821'
+	Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
+	Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
+
+Authors:
+	Tomaz Mertelj <tomaz.mertelj@guest.arnes.si>
+
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments amc6821 chip.
+The chip has one on-chip and one remote temperature sensor and one pwm fan
+regulator.
+The pwm can be controlled either from software or automatically.
+
+The driver provides the following sensor accesses in sysfs:
+
+temp1_input		ro	on-chip temperature
+temp1_min		rw	"
+temp1_max		rw	"
+temp1_crit	 	rw	"
+temp1_min_alarm		ro	"
+temp1_max_alarm		ro	"
+temp1_crit_alarm	ro	"
+
+temp2_input		ro	remote temperature
+temp2_min		rw	"
+temp2_max		rw	"
+temp2_crit	 	rw	"
+temp2_min_alarm		ro	"
+temp2_max_alarm		ro	"
+temp2_crit_alarm	ro	"
+temp2_fault		ro	"
+
+fan1_input	 	ro	tachometer speed
+fan1_min		rw	"
+fan1_max		rw	"
+fan1_fault	 	ro	"
+fan1_div		rw	Fan divisor can be either 2 or 4.
+
+pwm1			rw	pwm1
+pwm1_enable		rw	regulator mode, 1=open loop, 2=fan controlled
+				by remote temperature, 3=fan controlled by
+				combination of the on-chip temperature and
+				remote-sensor temperature,
+pwm1_auto_channels_temp ro	1 if pwm_enable==2, 3 if pwm_enable==3
+pwm1_auto_point1_pwm	ro	Hardwired to 0, shared for both
+				temperature channels.
+pwm1_auto_point2_pwm	rw	This value is shared for both temperature
+				channels.
+pwm1_auto_point3_pwm	rw	Hardwired to 255, shared for both
+				temperature channels.
+
+temp1_auto_point1_temp	ro	Hardwired to temp2_auto_point1_temp
+				which is rw. Below this temperature fan stops.
+temp1_auto_point2_temp	rw	The low-temperature limit of the proportional
+				range. Below this temperature
+				pwm1 = pwm1_auto_point2_pwm. It can go from
+				0 degree C to 124 degree C in steps of
+				4 degree C. Read it out after writing to get
+				the actual value.
+temp1_auto_point3_temp	rw	Above this temperature fan runs at maximum
+				speed. It can go from temp1_auto_point2_temp.
+				It can only have certain discrete values
+				which depend on temp1_auto_point2_temp and
+				pwm1_auto_point2_pwm. Read it out after
+				writing to get the actual value.
+
+temp2_auto_point1_temp	rw	Must be between 0 degree C and 63 degree C and
+				it defines the passive cooling temperature.
+				Below this temperature the fan stops in
+				the closed loop mode.
+temp2_auto_point2_temp	rw	The low-temperature limit of the proportional
+				range. Below this temperature
+				pwm1 = pwm1_auto_point2_pwm. It can go from
+				0 degree C to 124 degree C in steps
+				of 4 degree C.
+
+temp2_auto_point3_temp	rw	Above this temperature fan runs at maximum
+				speed. It can only have certain discrete
+				values which depend on temp2_auto_point2_temp
+				and pwm1_auto_point2_pwm. Read it out after
+				writing to get actual value.
+
+
+Module parameters
+-----------------
+
+If your board has a BIOS that initializes the amc6821 correctly, you should
+load the module with: init=0.
+
+If your board BIOS doesn't initialize the chip, or you want
+different settings, you can set the following parameters:
+init=1,
+pwminv: 0 default pwm output, 1 inverts pwm output.
+

Documentation/hwmon/k10temp

@@ -3,8 +3,8 @@ Kernel driver k10temp
 
 Supported chips:
 * AMD Family 10h processors:
-  Socket F: Quad-Core/Six-Core/Embedded Opteron
-  Socket AM2+: Opteron, Phenom (II) X3/X4
+  Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below)
+  Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below)
   Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
@@ -36,10 +36,15 @@ Description
 This driver permits reading of the internal temperature sensor of AMD
 Family 10h and 11h processors.
 
-All these processors have a sensor, but on older revisions of Family 10h
-processors, the sensor may return inconsistent values (erratum 319). The
-driver will refuse to load on these revisions unless you specify the
-"force=1" module parameter.
+All these processors have a sensor, but on those for Socket F or AM2+,
+the sensor may return inconsistent values (erratum 319).  The driver
+will refuse to load on these revisions unless you specify the "force=1"
+module parameter.
+
+Due to technical reasons, the driver can detect only the mainboard's
+socket type, not the processor's actual capabilities.  Therefore, if you
+are using an AM3 processor on an AM2+ mainboard, you can safely use the
+"force=1" parameter.
 
 There is one temperature measurement value, available as temp1_input in
 sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.

Documentation/input/multi-touch-protocol.txt

@@ -27,12 +27,30 @@ set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
-minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
-ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
-device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
-ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
+allows for multiple fingers to be tracked.  If the device supports it, the
+ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the contact area and approaching finger, respectively.
+
+The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
+looking through a window at someone gently holding a finger against the
+glass.  You will see two regions, one inner region consisting of the part
+of the finger actually touching the glass, and one outer region formed by
+the perimeter of the finger. The diameter of the inner region is the
+ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
+ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
+against the glass. The inner region will increase, and in general, the
+ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
+unity, is related to the finger pressure. For pressure-based devices,
+ABS_MT_PRESSURE may be used to provide the pressure on the contact area
+instead.
+
+In addition to the MAJOR parameters, the oval shape of the finger can be
+described by adding the MINOR parameters, such that MAJOR and MINOR are the
+major and minor axis of an ellipse. Finally, the orientation of the oval
+shape can be describe with the ORIENTATION parameter.
+
+The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
 finger or a pen or something else.  Devices with more granular information
 may specify general shapes as blobs, i.e., as a sequence of rectangular
 shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
@@ -42,11 +60,9 @@ report finger tracking from hardware [5].
 Here is what a minimal event sequence for a two-finger touch would look
 like:
 
-   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
-   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
@@ -87,6 +103,12 @@ the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
 the notion of pressure. The fingers of the hand and the palm all have
 different characteristic widths [1].
 
+ABS_MT_PRESSURE
+
+The pressure, in arbitrary units, on the contact area. May be used instead
+of TOUCH and WIDTH for pressure-based devices or any device with a spatial
+signal intensity distribution.
+
 ABS_MT_ORIENTATION
 
 The orientation of the ellipse. The value should describe a signed quarter
@@ -170,6 +192,16 @@ There are a few devices that support trackingID in hardware. User space can
 make use of these native identifiers to reduce bandwidth and cpu usage.
 
 
+Gestures
+--------
+
+In the specific application of creating gesture events, the TOUCH and WIDTH
+parameters can be used to, e.g., approximate finger pressure or distinguish
+between index finger and thumb. With the addition of the MINOR parameters,
+one can also distinguish between a sweeping finger and a pointing finger,
+and with ORIENTATION, one can detect twisting of fingers.
+
+
 Notes
 -----
 

Documentation/ioctl/ioctl-number.txt

@@ -56,10 +56,11 @@ Following this convention is good because:
 (5) When following the convention, the driver code can use generic
     code to copy the parameters between user and kernel space.
 
-This table lists ioctls visible from user land for Linux/i386.  It contains
-most drivers up to 2.3.14, but I know I am missing some.
+This table lists ioctls visible from user land for Linux/x86.  It contains
+most drivers up to 2.6.31, but I know I am missing some.  There has been
+no attempt to list non-X86 architectures or ioctls from drivers/staging/.
 
-Code	Seq#	Include File		Comments
+Code  Seq#(hex)	Include File		Comments
 ========================================================
 0x00	00-1F	linux/fs.h		conflict!
 0x00	00-1F	scsi/scsi_ioctl.h	conflict!
@@ -69,119 +70,228 @@ Code	Seq#	Include File		Comments
 0x03	all	linux/hdreg.h
 0x04	D2-DC	linux/umsdos_fs.h	Dead since 2.6.11, but don't reuse these.
 0x06	all	linux/lp.h
-0x09	all	linux/md.h
+0x09	all	linux/raid/md_u.h
+0x10	00-0F	drivers/char/s390/vmcp.h
 0x12	all	linux/fs.h
 		linux/blkpg.h
 0x1b	all	InfiniBand Subsystem	<http://www.openib.org/>
 0x20	all	drivers/cdrom/cm206.h
 0x22	all	scsi/sg.h
 '#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
+'$'	00-0F	linux/perf_counter.h, linux/perf_event.h
 '1'	00-1F	<linux/timepps.h>	PPS kit from Ulrich Windl
 					<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
+'2'	01-04	linux/i2o.h
+'3'	00-0F	drivers/s390/char/raw3270.h	conflict!
+'3'	00-1F	linux/suspend_ioctls.h	conflict!
+		and kernel/power/user.c
 '8'	all				SNP8023 advanced NIC card
 					<mailto:mcr@solidum.com>
-'A'	00-1F	linux/apm_bios.h
+'@'	00-0F	linux/radeonfb.h	conflict!
+'@'	00-0F	drivers/video/aty/aty128fb.c	conflict!
+'A'	00-1F	linux/apm_bios.h	conflict!
+'A'	00-0F	linux/agpgart.h		conflict!
+		and drivers/char/agp/compat_ioctl.h
+'A'	00-7F	sound/asound.h		conflict!
+'B'	00-1F	linux/cciss_ioctl.h	conflict!
+'B'	00-0F	include/linux/pmu.h	conflict!
 'B'	C0-FF				advanced bbus
 					<mailto:maassen@uni-freiburg.de>
-'C'	all	linux/soundcard.h
+'C'	all	linux/soundcard.h	conflict!
+'C'	01-2F	linux/capi.h		conflict!
+'C'	F0-FF	drivers/net/wan/cosa.h	conflict!
 'D'	all	arch/s390/include/asm/dasd.h
-'E'	all	linux/input.h
-'F'	all	linux/fb.h
-'H'	all	linux/hiddev.h
-'I'	all	linux/isdn.h
+'D'	40-5F	drivers/scsi/dpt/dtpi_ioctl.h
+'D'	05	drivers/scsi/pmcraid.h
+'E'	all	linux/input.h		conflict!
+'E'	00-0F	xen/evtchn.h		conflict!
+'F'	all	linux/fb.h		conflict!
+'F'	01-02	drivers/scsi/pmcraid.h	conflict!
+'F'	20	drivers/video/fsl-diu-fb.h	conflict!
+'F'	20	drivers/video/intelfb/intelfb.h	conflict!
+'F'	20	linux/ivtvfb.h		conflict!
+'F'	20	linux/matroxfb.h	conflict!
+'F'	20	drivers/video/aty/atyfb_base.c	conflict!
+'F'	00-0F	video/da8xx-fb.h	conflict!
+'F'	80-8F	linux/arcfb.h		conflict!
+'F'	DD	video/sstfb.h		conflict!
+'G'	00-3F	drivers/misc/sgi-gru/grulib.h	conflict!
+'G'	00-0F	linux/gigaset_dev.h	conflict!
+'H'	00-7F	linux/hiddev.h		conflict!
+'H'	00-0F	linux/hidraw.h		conflict!
+'H'	00-0F	sound/asound.h		conflict!
+'H'	20-40	sound/asound_fm.h	conflict!
+'H'	80-8F	sound/sfnt_info.h	conflict!
+'H'	10-8F	sound/emu10k1.h		conflict!
+'H'	10-1F	sound/sb16_csp.h	conflict!
+'H'	10-1F	sound/hda_hwdep.h	conflict!
+'H'	40-4F	sound/hdspm.h		conflict!
+'H'	40-4F	sound/hdsp.h		conflict!
+'H'	90	sound/usb/usx2y/usb_stream.h
+'H'	C0-F0	net/bluetooth/hci.h	conflict!
+'H'	C0-DF	net/bluetooth/hidp/hidp.h	conflict!
+'H'	C0-DF	net/bluetooth/cmtp/cmtp.h	conflict!
+'H'	C0-DF	net/bluetooth/bnep/bnep.h	conflict!
+'I'	all	linux/isdn.h		conflict!
+'I'	00-0F	drivers/isdn/divert/isdn_divert.h	conflict!
+'I'	40-4F	linux/mISDNif.h		conflict!
 'J'	00-1F	drivers/scsi/gdth_ioctl.h
 'K'	all	linux/kd.h
-'L'	00-1F	linux/loop.h
-'L'	20-2F	driver/usb/misc/vstusb.h
+'L'	00-1F	linux/loop.h		conflict!
+'L'	10-1F	drivers/scsi/mpt2sas/mpt2sas_ctl.h	conflict!
+'L'	20-2F	linux/usb/vstusb.h
 'L'	E0-FF	linux/ppdd.h		encrypted disk device driver
 					<http://linux01.gwdg.de/~alatham/ppdd.html>
-'M'	all	linux/soundcard.h
+'M'	all	linux/soundcard.h	conflict!
+'M'	01-16	mtd/mtd-abi.h		conflict!
+		and drivers/mtd/mtdchar.c
+'M'	01-03	drivers/scsi/megaraid/megaraid_sas.h
+'M'	00-0F	drivers/video/fsl-diu-fb.h	conflict!
 'N'	00-1F	drivers/usb/scanner.h
-'O'     00-02   include/mtd/ubi-user.h UBI
-'P'	all	linux/soundcard.h
+'O'     00-06   mtd/ubi-user.h		UBI
+'P'	all	linux/soundcard.h	conflict!
+'P'	60-6F	sound/sscape_ioctl.h	conflict!
+'P'	00-0F	drivers/usb/class/usblp.c	conflict!
 'Q'	all	linux/soundcard.h
-'R'	00-1F	linux/random.h
+'R'	00-1F	linux/random.h		conflict!
+'R'	01	linux/rfkill.h		conflict!
+'R'	01-0F	media/rds.h		conflict!
+'R'	C0-DF	net/bluetooth/rfcomm.h
 'S'	all	linux/cdrom.h		conflict!
 'S'	80-81	scsi/scsi_ioctl.h	conflict!
 'S'	82-FF	scsi/scsi.h		conflict!
+'S'	00-7F	sound/asequencer.h	conflict!
 'T'	all	linux/soundcard.h	conflict!
+'T'	00-AF	sound/asound.h		conflict!
 'T'	all	arch/x86/include/asm/ioctls.h	conflict!
-'U'	00-EF	linux/drivers/usb/usb.h
-'V'	all	linux/vt.h
+'T'	C0-DF	linux/if_tun.h		conflict!
+'U'	all	sound/asound.h		conflict!
+'U'	00-0F	drivers/media/video/uvc/uvcvideo.h	conflict!
+'U'	00-CF	linux/uinput.h		conflict!
+'U'	00-EF	linux/usbdevice_fs.h
+'U'	C0-CF	drivers/bluetooth/hci_uart.h
+'V'	all	linux/vt.h		conflict!
+'V'	all	linux/videodev2.h	conflict!
+'V'	C0	linux/ivtvfb.h		conflict!
+'V'	C0	linux/ivtv.h		conflict!
+'V'	C0	media/davinci/vpfe_capture.h	conflict!
+'V'	C0	media/si4713.h		conflict!
+'V'	C0-CF	drivers/media/video/mxb.h	conflict!
 'W'	00-1F	linux/watchdog.h	conflict!
 'W'	00-1F	linux/wanrouter.h	conflict!
-'X'	all	linux/xfs_fs.h
+'W'	00-3F	sound/asound.h		conflict!
+'X'	all	fs/xfs/xfs_fs.h		conflict!
+		and fs/xfs/linux-2.6/xfs_ioctl32.h
+		and include/linux/falloc.h
+		and linux/fs.h
+'X'	all	fs/ocfs2/ocfs_fs.h	conflict!
+'X'	01	linux/pktcdvd.h		conflict!
 'Y'	all	linux/cyclades.h
-'['	00-07	linux/usb/usbtmc.h	USB Test and Measurement Devices
+'Z'	14-15	drivers/message/fusion/mptctl.h
+'['	00-07	linux/usb/tmc.h		USB Test and Measurement Devices
 					<mailto:gregkh@suse.de>
-'a'	all				ATM on linux
+'a'	all	linux/atm*.h, linux/sonet.h	ATM on linux
 					<http://lrcwww.epfl.ch/linux-atm/magic.html>
-'b'	00-FF				bit3 vme host bridge
+'b'	00-FF				conflict! bit3 vme host bridge
 					<mailto:natalia@nikhefk.nikhef.nl>
+'b'	00-0F	media/bt819.h		conflict!
+'c'	all	linux/cm4000_cs.h	conflict!
 'c'	00-7F	linux/comstats.h	conflict!
 'c'	00-7F	linux/coda.h		conflict!
-'c'	80-9F	arch/s390/include/asm/chsc.h
-'c'	A0-AF   arch/x86/include/asm/msr.h
+'c'	00-1F	linux/chio.h		conflict!
+'c'	80-9F	arch/s390/include/asm/chsc.h	conflict!
+'c'	A0-AF   arch/x86/include/asm/msr.h	conflict!
 'd'	00-FF	linux/char/drm/drm/h	conflict!
+'d'	02-40	pcmcia/ds.h		conflict!
+'d'	10-3F	drivers/media/video/dabusb.h	conflict!
+'d'	C0-CF	drivers/media/video/saa7191.h	conflict!
 'd'	F0-FF	linux/digi1.h
 'e'	all	linux/digi1.h		conflict!
-'e'	00-1F	net/irda/irtty.h	conflict!
-'f'	00-1F	linux/ext2_fs.h
-'h'	00-7F				Charon filesystem
+'e'	00-1F	drivers/net/irda/irtty-sir.h	conflict!
+'f'	00-1F	linux/ext2_fs.h		conflict!
+'f'	00-1F	linux/ext3_fs.h		conflict!
+'f'	00-0F	fs/jfs/jfs_dinode.h	conflict!
+'f'	00-0F	fs/ext4/ext4.h		conflict!
+'f'	00-0F	linux/fs.h		conflict!
+'f'	00-0F	fs/ocfs2/ocfs2_fs.h	conflict!
+'g'	00-0F	linux/usb/gadgetfs.h
+'g'	20-2F	linux/usb/g_printer.h
+'h'	00-7F				conflict! Charon filesystem
 					<mailto:zapman@interlan.net>
-'i'	00-3F	linux/i2o.h
+'h'	00-1F	linux/hpet.h		conflict!
+'i'	00-3F	linux/i2o-dev.h		conflict!
+'i'	0B-1F	linux/ipmi.h		conflict!
+'i'	80-8F	linux/i8k.h
 'j'	00-3F	linux/joystick.h
+'k'	00-0F	linux/spi/spidev.h	conflict!
+'k'	00-05	video/kyro.h		conflict!
 'l'	00-3F	linux/tcfs_fs.h		transparent cryptographic file system
 					<http://mikonos.dia.unisa.it/tcfs>
 'l'	40-7F	linux/udf_fs_i.h	in development:
 					<http://sourceforge.net/projects/linux-udf/>
-'m'	00-09	linux/mmtimer.h
+'m'	00-09	linux/mmtimer.h		conflict!
 'm'	all	linux/mtio.h		conflict!
 'm'	all	linux/soundcard.h	conflict!
 'm'	all	linux/synclink.h	conflict!
+'m'	00-19	drivers/message/fusion/mptctl.h	conflict!
+'m'	00	drivers/scsi/megaraid/megaraid_ioctl.h	conflict!
 'm'	00-1F	net/irda/irmod.h	conflict!
-'n'	00-7F	linux/ncp_fs.h
+'n'	00-7F	linux/ncp_fs.h and fs/ncpfs/ioctl.c
 'n'	80-8F	linux/nilfs2_fs.h	NILFS2
-'n'	E0-FF	video/matrox.h          matroxfb
+'n'	E0-FF	linux/matroxfb.h	matroxfb
 'o'	00-1F	fs/ocfs2/ocfs2_fs.h	OCFS2
-'o'     00-03   include/mtd/ubi-user.h  conflict! (OCFS2 and UBI overlaps)
-'o'     40-41   include/mtd/ubi-user.h  UBI
-'o'     01-A1   include/linux/dvb/*.h DVB
+'o'     00-03   mtd/ubi-user.h		conflict! (OCFS2 and UBI overlaps)
+'o'     40-41   mtd/ubi-user.h		UBI
+'o'     01-A1   linux/dvb/*.h		DVB
 'p'	00-0F	linux/phantom.h		conflict! (OpenHaptics needs this)
+'p'	00-1F	linux/rtc.h		conflict!
 'p'	00-3F	linux/mc146818rtc.h	conflict!
 'p'	40-7F	linux/nvram.h
-'p'	80-9F				user-space parport
+'p'	80-9F	linux/ppdev.h		user-space parport
 					<mailto:tim@cyberelk.net>
-'p'	a1-a4	linux/pps.h		LinuxPPS
+'p'	A1-A4	linux/pps.h		LinuxPPS
 					<mailto:giometti@linux.it>
 'q'	00-1F	linux/serio.h
-'q'	80-FF				Internet PhoneJACK, Internet LineJACK
-					<http://www.quicknet.net>
-'r'	00-1F	linux/msdos_fs.h
+'q'	80-FF	linux/telephony.h	Internet PhoneJACK, Internet LineJACK
+		linux/ixjuser.h		<http://www.quicknet.net>
+'r'	00-1F	linux/msdos_fs.h and fs/fat/dir.c
 's'	all	linux/cdk.h
 't'	00-7F	linux/if_ppp.h
 't'	80-8F	linux/isdn_ppp.h
+'t'	90	linux/toshiba.h
 'u'	00-1F	linux/smb_fs.h
-'v'	00-1F	linux/ext2_fs.h		conflict!
 'v'	all	linux/videodev.h	conflict!
+'v'	00-1F	linux/ext2_fs.h		conflict!
+'v'	00-1F	linux/fs.h		conflict!
+'v'	00-0F	linux/sonypi.h		conflict!
+'v'	C0-CF	drivers/media/video/ov511.h	conflict!
+'v'	C0-DF	media/pwc-ioctl.h	conflict!
+'v'	C0-FF	linux/meye.h		conflict!
+'v'	C0-CF	drivers/media/video/zoran/zoran.h	conflict!
+'v'	D0-DF	drivers/media/video/cpia2/cpia2dev.h	conflict!
 'w'	all				CERN SCI driver
 'y'	00-1F				packet based user level communications
 					<mailto:zapman@interlan.net>
-'z'	00-3F				CAN bus card
+'z'	00-3F				CAN bus card	conflict!
 					<mailto:hdstich@connectu.ulm.circular.de>
-'z'	40-7F				CAN bus card
+'z'	40-7F				CAN bus card	conflict!
 					<mailto:oe@port.de>
+'z'	10-4F	drivers/s390/crypto/zcrypt_api.h	conflict!
 0x80	00-1F	linux/fb.h
 0x81	00-1F	linux/videotext.h
+0x88	00-3F	media/ovcamchip.h
 0x89	00-06	arch/x86/include/asm/sockios.h
 0x89	0B-DF	linux/sockios.h
 0x89	E0-EF	linux/sockios.h		SIOCPROTOPRIVATE range
+0x89	E0-EF	linux/dn.h		PROTOPRIVATE range
 0x89	F0-FF	linux/sockios.h		SIOCDEVPRIVATE range
 0x8B	all	linux/wireless.h
 0x8C	00-3F				WiNRADiO driver
 					<http://www.proximity.com.au/~brian/winradio/>
 0x90	00	drivers/cdrom/sbpcd.h
+0x92	00-0F	drivers/usb/mon/mon_bin.c
 0x93	60-7F	linux/auto_fs.h
+0x94	all	fs/btrfs/ioctl.h
 0x99	00-0F				537-Addinboard driver
 					<mailto:buk@buks.ipn.de>
 0xA0	all	linux/sdp/sdp.h		Industrial Device Project
@@ -192,17 +302,22 @@ Code	Seq#	Include File		Comments
 0xAB	00-1F	linux/nbd.h
 0xAC	00-1F	linux/raw.h
 0xAD	00	Netfilter device	in development:
-					<mailto:rusty@rustcorp.com.au>	
+					<mailto:rusty@rustcorp.com.au>
 0xAE	all	linux/kvm.h		Kernel-based Virtual Machine
 					<mailto:kvm@vger.kernel.org>
 0xB0	all	RATIO devices		in development:
 					<mailto:vgo@ratio.de>
 0xB1	00-1F	PPPoX			<mailto:mostrows@styx.uwaterloo.ca>
+0xC0	00-0F	linux/usb/iowarrior.h
 0xCB	00-1F	CBM serial IEC bus	in development:
 					<mailto:michael.klein@puffin.lb.shuttle.de>
+0xCD	01	linux/reiserfs_fs.h
+0xCF	02	fs/cifs/ioctl.c
+0xDB	00-0F	drivers/char/mwave/mwavepub.h
 0xDD	00-3F	ZFCP device driver	see drivers/s390/scsi/
 					<mailto:aherrman@de.ibm.com>
-0xF3	00-3F	video/sisfb.h		sisfb (in development)
+0xF3	00-3F	drivers/usb/misc/sisusbvga/sisusb.h	sisfb (in development)
 					<mailto:thomas@winischhofer.net>
 0xF4	00-1F	video/mbxfb.h		mbxfb
 					<mailto:raph@8d.com>
+0xFD	all	linux/dm-ioctl.h

Documentation/kernel-doc-nano-HOWTO.txt

@@ -214,11 +214,13 @@ The format of the block comment is like this:
  * (section header: (section description)? )*
 (*)?*/
 
-The short function description ***cannot be multiline***, but the other
-descriptions can be (and they can contain blank lines).  If you continue
-that initial short description onto a second line, that second line will
-appear further down at the beginning of the description section, which is
-almost certainly not what you had in mind.
+All "description" text can span multiple lines, although the
+function_name & its short description are traditionally on a single line.
+Description text may also contain blank lines (i.e., lines that contain
+only a "*").
+
+"section header:" names must be unique per function (or struct,
+union, typedef, enum).
 
 Avoid putting a spurious blank line after the function name, or else the
 description will be repeated!

Documentation/kernel-parameters.txt

@@ -199,6 +199,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_display_output=video
 			See above.
 
+	acpi_early_pdc_eval	[HW,ACPI] Evaluate processor _PDC methods
+				early. Needed on some platforms to properly
+				initialize the EC.
+
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode
@@ -311,6 +315,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
+	alignment=	[KNL,ARM]
+			Allow the default userspace alignment fault handler
+			behaviour to be specified.  Bit 0 enables warnings,
+			bit 1 enables fixups, and bit 2 sends a segfault.
+
 	amd_iommu=	[HW,X86-84]
 			Pass parameters to the AMD IOMMU driver in the system.
 			Possible values are:

Documentation/networking/3c509.txt

@@ -48,11 +48,11 @@ for LILO parameters for doing this:
 This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and
 transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts
 with other card types when overriding the I/O address. When the driver is
-loaded as a module, only the IRQ and transceiver setting may be overridden.
-For example, setting two cards to 10base2/IRQ10 and AUI/IRQ11 is done by using
-the xcvr and irq module options:
+loaded as a module, only the IRQ may be overridden. For example,
+setting two cards to IRQ10 and IRQ11 is done by using the irq module
+option:
 
-   options 3c509 xcvr=3,1 irq=10,11
+   options 3c509 irq=10,11
 
 
 (2) Full-duplex mode
@@ -77,6 +77,8 @@ operation.
 itself full-duplex capable. This is almost certainly one of two things: a full-
 duplex-capable  Ethernet switch (*not* a hub), or a full-duplex-capable NIC on
 another system that's connected directly to the 3c509B via a crossover cable.
+
+Full-duplex mode can be enabled using 'ethtool'.
  
 /////Extremely important caution concerning full-duplex mode/////
 Understand that the 3c509B's hardware's full-duplex support is much more
@@ -113,6 +115,8 @@ This insured that merely upgrading the driver from an earlier version would
 never automatically enable full-duplex mode in an existing installation;
 it must always be explicitly enabled via one of these code in order to be
 activated.
+
+The transceiver type can be changed using 'ethtool'.
   
 
 (4a) Interpretation of error messages and common problems

Documentation/networking/ip-sysctl.txt

@@ -1074,10 +1074,10 @@ regen_max_retry - INTEGER
 	Default: 5
 
 max_addresses - INTEGER
-	Number of maximum addresses per interface.  0 disables limitation.
-	It is recommended not set too large value (or 0) because it would
-	be too easy way to crash kernel to allow to create too much of
-	autoconfigured addresses.
+	Maximum number of autoconfigured addresses per interface.  Setting
+	to zero disables the limitation.  It is not recommended to set this
+	value too large (or to zero) because it would be an easy way to
+	crash the kernel by allowing too many addresses to be created.
 	Default: 16
 
 disable_ipv6 - BOOLEAN

Documentation/trace/ftrace-design.txt

@@ -1,5 +1,6 @@
 		function tracer guts
 		====================
+		By Mike Frysinger
 
 Introduction
 ------------
@@ -173,14 +174,16 @@ void ftrace_graph_caller(void)
 
 	unsigned long *frompc = &...;
 	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
-	prepare_ftrace_return(frompc, selfpc);
+	/* passing frame pointer up is optional -- see below */
+	prepare_ftrace_return(frompc, selfpc, frame_pointer);
 
 	/* restore all state needed by the ABI */
 }
 #endif
 
-For information on how to implement prepare_ftrace_return(), simply look at
-the x86 version.  The only architecture-specific piece in it is the setup of
+For information on how to implement prepare_ftrace_return(), simply look at the
+x86 version (the frame pointer passing is optional; see the next section for
+more information).  The only architecture-specific piece in it is the setup of
 the fault recovery table (the asm(...) code).  The rest should be the same
 across architectures.
 
@@ -205,6 +208,23 @@ void return_to_handler(void)
 #endif
 
 
+HAVE_FUNCTION_GRAPH_FP_TEST
+---------------------------
+
+An arch may pass in a unique value (frame pointer) to both the entering and
+exiting of a function.  On exit, the value is compared and if it does not
+match, then it will panic the kernel.  This is largely a sanity check for bad
+code generation with gcc.  If gcc for your port sanely updates the frame
+pointer under different opitmization levels, then ignore this option.
+
+However, adding support for it isn't terribly difficult.  In your assembly code
+that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
+Then in the C version of that function, do what the x86 port does and pass it
+along to ftrace_push_return_trace() instead of a stub value of 0.
+
+Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer.
+
+
 HAVE_FTRACE_NMI_ENTER
 ---------------------
 

Documentation/trace/ftrace.txt

@@ -1625,7 +1625,7 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt:
 
  # echo sys_nanosleep hrtimer_interrupt \
 		> set_ftrace_filter
- # echo ftrace > current_tracer
+ # echo function > current_tracer
  # echo 1 > tracing_enabled
  # usleep 1
  # echo 0 > tracing_enabled

Documentation/trace/ring-buffer-design.txt

@@ -33,9 +33,9 @@ head_page - a pointer to the page that the reader will use next
 
 tail_page - a pointer to the page that will be written to next
 
-commit_page - a pointer to the page with the last finished non nested write.
+commit_page - a pointer to the page with the last finished non-nested write.
 
-cmpxchg - hardware assisted atomic transaction that performs the following:
+cmpxchg - hardware-assisted atomic transaction that performs the following:
 
    A = B iff previous A == C
 
@@ -52,15 +52,15 @@ The Generic Ring Buffer
 The ring buffer can be used in either an overwrite mode or in
 producer/consumer mode.
 
-Producer/consumer mode is where the producer were to fill up the
+Producer/consumer mode is where if the producer were to fill up the
 buffer before the consumer could free up anything, the producer
 will stop writing to the buffer. This will lose most recent events.
 
-Overwrite mode is where the produce were to fill up the buffer
+Overwrite mode is where if the producer were to fill up the buffer
 before the consumer could free up anything, the producer will
 overwrite the older data. This will lose the oldest events.
 
-No two writers can write at the same time (on the same per cpu buffer),
+No two writers can write at the same time (on the same per-cpu buffer),
 but a writer may interrupt another writer, but it must finish writing
 before the previous writer may continue. This is very important to the
 algorithm. The writers act like a "stack". The way interrupts works
@@ -79,16 +79,16 @@ the interrupt doing a write as well.
 
 Readers can happen at any time. But no two readers may run at the
 same time, nor can a reader preempt/interrupt another reader. A reader
-can not preempt/interrupt a writer, but it may read/consume from the
+cannot preempt/interrupt a writer, but it may read/consume from the
 buffer at the same time as a writer is writing, but the reader must be
 on another processor to do so. A reader may read on its own processor
 and can be preempted by a writer.
 
-A writer can preempt a reader, but a reader can not preempt a writer.
+A writer can preempt a reader, but a reader cannot preempt a writer.
 But a reader can read the buffer at the same time (on another processor)
 as a writer.
 
-The ring buffer is made up of a list of pages held together by a link list.
+The ring buffer is made up of a list of pages held together by a linked list.
 
 At initialization a reader page is allocated for the reader that is not
 part of the ring buffer.
@@ -102,7 +102,7 @@ the head page.
 
 The reader has its own page to use. At start up time, this page is
 allocated but is not attached to the list. When the reader wants
-to read from the buffer, if its page is empty (like it is on start up)
+to read from the buffer, if its page is empty (like it is on start-up),
 it will swap its page with the head_page. The old reader page will
 become part of the ring buffer and the head_page will be removed.
 The page after the inserted page (old reader_page) will become the
@@ -206,7 +206,7 @@ The main pointers:
 
   commit page - the page that last finished a write.
 
-The commit page only is updated by the outer most writer in the
+The commit page only is updated by the outermost writer in the
 writer stack. A writer that preempts another writer will not move the
 commit page.
 
@@ -281,7 +281,7 @@ with the previous write.
 The commit pointer points to the last write location that was
 committed without preempting another write. When a write that
 preempted another write is committed, it only becomes a pending commit
-and will not be a full commit till all writes have been committed.
+and will not be a full commit until all writes have been committed.
 
 The commit page points to the page that has the last full commit.
 The tail page points to the page with the last write (before
@@ -292,7 +292,7 @@ be several pages ahead. If the tail page catches up to the commit
 page then no more writes may take place (regardless of the mode
 of the ring buffer: overwrite and produce/consumer).
 
-The order of pages are:
+The order of pages is:
 
  head page
  commit page
@@ -311,7 +311,7 @@ Possible scenario:
 There is a special case that the head page is after either the commit page
 and possibly the tail page. That is when the commit (and tail) page has been
 swapped with the reader page. This is because the head page is always
-part of the ring buffer, but the reader page is not. When ever there
+part of the ring buffer, but the reader page is not. Whenever there
 has been less than a full page that has been committed inside the ring buffer,
 and a reader swaps out a page, it will be swapping out the commit page.
 
@@ -338,7 +338,7 @@ and a reader swaps out a page, it will be swapping out the commit page.
 In this case, the head page will not move when the tail and commit
 move back into the ring buffer.
 
-The reader can not swap a page into the ring buffer if the commit page
+The reader cannot swap a page into the ring buffer if the commit page
 is still on that page. If the read meets the last commit (real commit
 not pending or reserved), then there is nothing more to read.
 The buffer is considered empty until another full commit finishes.
@@ -395,7 +395,7 @@ The main idea behind the lockless algorithm is to combine the moving
 of the head_page pointer with the swapping of pages with the reader.
 State flags are placed inside the pointer to the page. To do this,
 each page must be aligned in memory by 4 bytes. This will allow the 2
-least significant bits of the address to be used as flags. Since
+least significant bits of the address to be used as flags, since
 they will always be zero for the address. To get the address,
 simply mask out the flags.
 
@@ -460,7 +460,7 @@ When the reader tries to swap the page with the ring buffer, it
 will also use cmpxchg. If the flag bit in the pointer to the
 head page does not have the HEADER flag set, the compare will fail
 and the reader will need to look for the new head page and try again.
-Note, the flag UPDATE and HEADER are never set at the same time.
+Note, the flags UPDATE and HEADER are never set at the same time.
 
 The reader swaps the reader page as follows:
 
@@ -539,7 +539,7 @@ updated to the reader page.
     |  +-----------------------------+   |
     +------------------------------------+
 
-Another important point. The page that the reader page points back to
+Another important point: The page that the reader page points back to
 by its previous pointer (the one that now points to the new head page)
 never points back to the reader page. That is because the reader page is
 not part of the ring buffer. Traversing the ring buffer via the next pointers
@@ -572,7 +572,7 @@ not be able to swap the head page from the buffer, nor will it be able to
 move the head page, until the writer is finished with the move.
 
 This eliminates any races that the reader can have on the writer. The reader
-must spin, and this is why the reader can not preempt the writer.
+must spin, and this is why the reader cannot preempt the writer.
 
             tail page
                |
@@ -659,9 +659,9 @@ before pushing the head page. If it is, then it can be assumed that the
 tail page wrapped the buffer, and we must drop new writes.
 
 This is not a race condition, because the commit page can only be moved
-by the outter most writer (the writer that was preempted).
+by the outermost writer (the writer that was preempted).
 This means that the commit will not move while a writer is moving the
-tail page. The reader can not swap the reader page if it is also being
+tail page. The reader cannot swap the reader page if it is also being
 used as the commit page. The reader can simply check that the commit
 is off the reader page. Once the commit page leaves the reader page
 it will never go back on it unless a reader does another swap with the
@@ -733,7 +733,7 @@ The write converts the head page pointer to UPDATE.
 --->|   |<---|   |<---|   |<---|   |<---
     +---+    +---+    +---+    +---+
 
-But if a nested writer preempts here. It will see that the next
+But if a nested writer preempts here, it will see that the next
 page is a head page, but it is also nested. It will detect that
 it is nested and will save that information. The detection is the
 fact that it sees the UPDATE flag instead of a HEADER or NORMAL
@@ -761,7 +761,7 @@ to NORMAL.
 --->|   |<---|   |<---|   |<---|   |<---
     +---+    +---+    +---+    +---+
 
-After the nested writer finishes, the outer most writer will convert
+After the nested writer finishes, the outermost writer will convert
 the UPDATE pointer to NORMAL.
 
 
@@ -812,7 +812,7 @@ head page.
     +---+    +---+    +---+    +---+
 
 The nested writer moves the tail page forward. But does not set the old
-update page to NORMAL because it is not the outer most writer.
+update page to NORMAL because it is not the outermost writer.
 
                     tail page
                         |
@@ -892,7 +892,7 @@ It will return to the first writer.
 --->|   |<---|   |<---|   |<---|   |<---
     +---+    +---+    +---+    +---+
 
-The first writer can not know atomically test if the tail page moved
+The first writer cannot know atomically if the tail page moved
 while it updates the HEAD page. It will then update the head page to
 what it thinks is the new head page.
 
@@ -923,9 +923,9 @@ if the tail page is either where it use to be or on the next page:
 --->|   |<---|   |<---|   |<---|   |<---
     +---+    +---+    +---+    +---+
 
-If tail page != A and tail page does not equal B, then it must reset the
-pointer back to NORMAL. The fact that it only needs to worry about
-nested writers, it only needs to check this after setting the HEAD page.
+If tail page != A and tail page != B, then it must reset the pointer
+back to NORMAL. The fact that it only needs to worry about nested
+writers means that it only needs to check this after setting the HEAD page.
 
 
 (first writer)
@@ -939,7 +939,7 @@ nested writers, it only needs to check this after setting the HEAD page.
     +---+    +---+    +---+    +---+
 
 Now the writer can update the head page. This is also why the head page must
-remain in UPDATE and only reset by the outer most writer. This prevents
+remain in UPDATE and only reset by the outermost writer. This prevents
 the reader from seeing the incorrect head page.
 
 

MAINTAINERS

@@ -410,9 +410,8 @@ F:	drivers/i2c/busses/i2c-ali1563.c
 
 ALPHA PORT
 M:	Richard Henderson <rth@twiddle.net>
-S:	Odd Fixes for 2.4; Maintained for 2.6.
 M:	Ivan Kokshaysky <ink@jurassic.park.msu.ru>
-S:	Maintained for 2.4; PCI support for 2.6.
+M:	Matt Turner <mattst88@gmail.com>
 L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
@@ -617,10 +616,10 @@ M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://gitorious.org/linux-gemini/mainline.git
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -642,9 +641,9 @@ T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
@@ -988,7 +987,6 @@ F:	drivers/platform/x86/asus-laptop.c
 
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 M:	Dan Williams <dan.j.williams@intel.com>
-M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 W:	http://sourceforge.net/projects/xscaleiop
 S:	Supported
 F:	Documentation/crypto/async-tx-api.txt
@@ -1638,9 +1636,8 @@ S:	Maintained
 F:	sound/pci/cs5535audio/
 
 CX18 VIDEO4LINUX DRIVER
-M:	Hans Verkuil <hverkuil@xs4all.nl>
 M:	Andy Walls <awalls@radix.net>
-L:	ivtv-devel@ivtvdriver.org
+L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://linuxtv.org
@@ -1736,10 +1733,9 @@ F:	include/linux/tfrc.h
 F:	net/dccp/
 
 DECnet NETWORK LAYER
-M:	Christine Caulfield <christine.caulfield@googlemail.com>
 W:	http://linux-decnet.sourceforge.net
 L:	linux-decnet-user@lists.sourceforge.net
-S:	Maintained
+S:	Orphan
 F:	Documentation/networking/decnet.txt
 F:	net/decnet/
 
@@ -1825,7 +1821,6 @@ S:	Supported
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
@@ -2788,7 +2783,7 @@ F:	arch/x86/kernel/microcode_core.c
 F:	arch/x86/kernel/microcode_intel.c
 
 INTEL I/OAT DMA DRIVER
-M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/ioat*
 
@@ -2826,10 +2821,11 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ixp2000/
 
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 M:	Bruce Allan <bruce.w.allan@intel.com>
+M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
@@ -2839,6 +2835,7 @@ F:	drivers/net/e100.c
 F:	drivers/net/e1000/
 F:	drivers/net/e1000e/
 F:	drivers/net/igb/
+F:	drivers/net/igbvf/
 F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
@@ -3012,8 +3009,8 @@ S:	Maintained
 F:	drivers/isdn/hardware/eicon/
 
 IVTV VIDEO4LINUX DRIVER
-M:	Hans Verkuil <hverkuil@xs4all.nl>
-L:	ivtv-devel@ivtvdriver.org
+M:	Andy Walls <awalls@radix.net>
+L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://www.ivtvdriver.org
@@ -3413,8 +3410,10 @@ S:	Maintained
 F:	drivers/scsi/sym53c8xx_2/
 
 LTP (Linux Test Project)
-M:	Subrata Modak <subrata@linux.vnet.ibm.com>
-M:	Mike Frysinger <vapier@gentoo.org>
+M:	Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
+M:	Garrett Cooper <yanegomi@gmail.com>
+M:     Mike Frysinger <vapier@gentoo.org>
+M:     Subrata Modak <subrata@linux.vnet.ibm.com>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
@@ -3490,9 +3489,9 @@ S:	Maintained
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
-M:	Lennert Buytenhek <buytenh@marvell.com>
+M:	Lennert Buytenhek <buytenh@wantstofly.org>
 L:	netdev@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/net/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
@@ -3838,6 +3837,7 @@ NETWORKING DRIVERS
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
 S:	Odd Fixes
 F:	drivers/net/
 F:	include/linux/if_*
@@ -3940,29 +3940,20 @@ S:	Maintained
 F:	sound/soc/omap/
 
 OMAP FRAMEBUFFER SUPPORT
-M:	Imre Deak <imre.deak@nokia.com>
+M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
 L:	linux-fbdev@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/video/omap/
 
-OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2)
+OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
 M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
 L:	linux-omap@vger.kernel.org
-L:	linux-fbdev@vger.kernel.org (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
-F:	drivers/video/omap2/dss/
-F:	drivers/video/omap2/vrfb.c
-F:	drivers/video/omap2/vram.c
+F:	drivers/video/omap2/
 F:	Documentation/arm/OMAP/DSS
 
-OMAP FRAMEBUFFER SUPPORT (FOR DSS2)
-M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
-L:	linux-omap@vger.kernel.org
-L:	linux-fbdev@vger.kernel.org (moderated for non-subscribers)
-S:	Maintained
-F:	drivers/video/omap2/omapfb/
-
 OMAP MMC SUPPORT
 M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
 L:	linux-omap@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 33
-EXTRAVERSION = -rc3
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -18,10 +18,9 @@ MAKEFLAGS += -rR --no-print-directory
 
 # Avoid funny character set dependencies
 unexport LC_ALL
-LC_CTYPE=C
 LC_COLLATE=C
 LC_NUMERIC=C
-export LC_CTYPE LC_COLLATE LC_NUMERIC
+export LC_COLLATE LC_NUMERIC
 
 # We are using a recursive build, so we need to do a little thinking
 # to get the ordering right.

arch/alpha/include/asm/topology.h

@@ -28,6 +28,9 @@ static const struct cpumask *cpumask_of_node(int node)
 {
 	int cpu;
 
+	if (node == -1)
+		return cpu_all_mask;
+
 	cpumask_clear(&node_to_cpumask_map[node]);
 
 	for_each_online_cpu(cpu) {

arch/arm/Kconfig

@@ -18,6 +18,8 @@ config ARM
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZO
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -688,6 +690,7 @@ config ARCH_DAVINCI
 	select HAVE_IDE
 	select COMMON_CLKDEV
 	select GENERIC_ALLOCATOR
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's DaVinci platform.
 
@@ -699,6 +702,7 @@ config ARCH_OMAP
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
@@ -726,14 +730,26 @@ config ARCH_U8500
 
 endchoice
 
+source "arch/arm/mach-aaec2000/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcmring/Kconfig"
+
 source "arch/arm/mach-clps711x/Kconfig"
 
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
 source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
+source "arch/arm/mach-h720x/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -748,16 +764,26 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
 source "arch/arm/mach-loki/Kconfig"
 
+source "arch/arm/mach-msm/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
 
-source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
 
-source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
+
+source "arch/arm/mach-ns9xxx/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
 
@@ -767,9 +793,14 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
 
-source "arch/arm/mach-dove/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
@@ -797,41 +828,14 @@ if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
 
-source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-aaec2000/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
-
-source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-ns9xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
-
-source "arch/arm/mach-u300/Kconfig"
-
 source "arch/arm/mach-w90x900/Kconfig"
 
-source "arch/arm/mach-bcmring/Kconfig"
-
-source "arch/arm/mach-ux500/Kconfig"
-
 # Definitions to make life easier
 config ARCH_ACORN
 	bool

arch/arm/Makefile

@@ -94,7 +94,7 @@ CFLAGS_ABI	+=-funwind-tables
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
@@ -171,12 +172,12 @@ machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
-machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
@@ -184,7 +185,6 @@ plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
 plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
-plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

arch/arm/boot/compressed/Makefile

@@ -63,8 +63,12 @@ endif
 
 SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 
-targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
-		 head.o misc.o $(OBJS)
+suffix_$(CONFIG_KERNEL_GZIP) = gzip
+suffix_$(CONFIG_KERNEL_LZO)  = lzo
+
+targets       := vmlinux vmlinux.lds \
+		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+		 font.o font.c head.o misc.o $(OBJS)
 
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -87,22 +91,34 @@ endif
 ifneq ($(PARAMS_PHYS),)
 LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
 endif
-LDFLAGS_vmlinux += -p --no-undefined -X \
-	$(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T
+# ?
+LDFLAGS_vmlinux += -p
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# For __aeabi_uidivmod
+lib1funcs = $(obj)/lib1funcs.o
+
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+	$(call cmd,shipped)
 
 # Don't allow any static data in misc.o, which
 # would otherwise mess up our GOT table
 CFLAGS_misc.o := -Dstatic=
 
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
-	 	$(addprefix $(obj)/, $(OBJS)) FORCE
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
 	$(call if_changed,ld)
 	@:
 
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)
+$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
+	$(call if_changed,$(suffix_y))
 
-$(obj)/piggy.o:  $(obj)/piggy.gz FORCE
+$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
 
 CFLAGS_font.o := -Dstatic=
 

arch/arm/boot/compressed/head.S

@@ -27,6 +27,14 @@
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
+#elif defined(CONFIG_CPU_V7)
+		.macro	loadsp, rb
+		.endm
+		.macro	writeb, ch, rb
+wait:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	wait
+		mcr	p14, 0, \ch, c0, c5, 0
+		.endm
 #elif defined(CONFIG_CPU_XSCALE)
 		.macro	loadsp, rb
 		.endm

arch/arm/boot/compressed/misc.c

@@ -18,10 +18,15 @@
 
 unsigned int __machine_arch_type;
 
+#define _LINUX_STRING_H_
+
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>	/* for size_t */
 #include <linux/stddef.h>	/* for NULL */
 #include <asm/string.h>
+#include <linux/linkage.h>
+
+#include <asm/unaligned.h>
 
 #ifdef STANDALONE_DEBUG
 #define putstr printf
@@ -48,6 +53,18 @@ static void icedcc_putc(int ch)
 
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
+
+#elif defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+	asm(
+	"wait:	mrc	p14, 0, pc, c0, c1, 0			\n\
+		bcs	wait					\n\
+		mcr     p14, 0, %0, c0, c5, 0			"
+	: : "r" (ch));
+}
+
 #elif defined(CONFIG_CPU_XSCALE)
 
 static void icedcc_putc(int ch)
@@ -83,7 +100,6 @@ static void icedcc_putc(int ch)
 #endif
 
 #define putc(ch)	icedcc_putc(ch)
-#define flush()	do { } while (0)
 #endif
 
 static void putstr(const char *ptr)
@@ -188,34 +204,8 @@ static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
 /*
  * gzip delarations
  */
-#define OF(args)  args
 #define STATIC static
 
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;		/* input buffer */
-static uch window[WSIZE];	/* Sliding window buffer */
-
-static unsigned insize;		/* valid bytes in inbuf */
-static unsigned inptr;		/* index of next byte to be processed in inbuf */
-static unsigned outcnt;		/* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
 /* Diagnostic functions */
 #ifdef DEBUG
 #  define Assert(cond,msg) {if(!(cond)) error(msg);}
@@ -233,24 +223,20 @@ static unsigned outcnt;		/* bytes in output buffer */
 #  define Tracecv(c,x)
 #endif
 
-static int  fill_inbuf(void);
-static void flush_window(void);
 static void error(char *m);
 
 extern char input_data[];
 extern char input_data_end[];
 
-static uch *output_data;
-static ulg output_ptr;
-static ulg bytes_out;
+static unsigned char *output_data;
+static unsigned long output_ptr;
 
 static void error(char *m);
 
 static void putstr(const char *);
 
-extern int end;
-static ulg free_mem_ptr;
-static ulg free_mem_end_ptr;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
 
 #ifdef STANDALONE_DEBUG
 #define NO_INFLATE_MALLOC
@@ -258,46 +244,13 @@ static ulg free_mem_end_ptr;
 
 #define ARCH_HAS_DECOMP_WDOG
 
-#include "../../../../lib/inflate.c"
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-int fill_inbuf(void)
-{
-	if (insize != 0)
-		error("ran out of input data");
-
-	inbuf = input_data;
-	insize = &input_data_end[0] - &input_data[0];
-
-	inptr = 1;
-	return inbuf[0];
-}
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
 
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-void flush_window(void)
-{
-	ulg c = crc;
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out++ = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-	putstr(".");
-}
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
 
 #ifndef arch_error
 #define arch_error(x)
@@ -314,22 +267,33 @@ static void error(char *x)
 	while(1);	/* Halt */
 }
 
+asmlinkage void __div0(void)
+{
+	error("Attempting division by 0!");
+}
+
 #ifndef STANDALONE_DEBUG
 
-ulg
-decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
-		  int arch_id)
+unsigned long
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		unsigned long free_mem_ptr_end_p,
+		int arch_id)
 {
-	output_data		= (uch *)output_start;	/* Points to kernel start */
+	unsigned char *tmp;
+
+	output_data		= (unsigned char *)output_start;
 	free_mem_ptr		= free_mem_ptr_p;
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
 	arch_decomp_setup();
 
-	makecrc();
+	tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
+	output_ptr = get_unaligned_le32(tmp);
+
 	putstr("Uncompressing Linux...");
-	gunzip();
+	decompress(input_data, input_data_end - input_data,
+			NULL, NULL, output_data, NULL, error);
 	putstr(" done, booting the kernel.\n");
 	return output_ptr;
 }
@@ -341,11 +305,10 @@ int main()
 {
 	output_data = output_buffer;
 
-	makecrc();
 	putstr("Uncompressing Linux...");
-	gunzip();
+	decompress(input_data, input_data_end - input_data,
+			NULL, NULL, output_data, NULL, error);
 	putstr("done.\n");
 	return 0;
 }
 #endif
-	

arch/arm/boot/compressed/piggy.gzip.S

@@ -0,0 +1,6 @@
+	.section .piggydata,#alloc
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy.gzip"
+	.globl	input_data_end
+input_data_end:

arch/arm/boot/compressed/piggy.S → arch/arm/boot/compressed/piggy.lzo.S

@@ -1,6 +1,6 @@
 	.section .piggydata,#alloc
 	.globl	input_data
 input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.gz"
+	.incbin	"arch/arm/boot/compressed/piggy.lzo"
 	.globl	input_data_end
 input_data_end:

arch/arm/configs/u300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 17 23:32:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan  6 00:01:36 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -46,6 +46,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -119,14 +120,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -155,6 +183,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -177,6 +206,7 @@ CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -265,12 +295,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
@@ -499,14 +527,21 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -517,6 +552,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -539,6 +575,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -645,7 +682,6 @@ CONFIG_I2C_STU300=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -661,6 +697,8 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PL022=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -708,6 +746,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -716,6 +755,8 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_AB3100_CORE=y
 CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -723,6 +764,7 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
 # CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_AB3100=y
 # CONFIG_REGULATOR_TPS65023 is not set
@@ -840,7 +882,9 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -882,6 +926,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -911,7 +956,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 CONFIG_RTC_DRV_AB3100=y
 
@@ -926,6 +973,15 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+CONFIG_COH901318=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -1018,7 +1074,7 @@ CONFIG_MISC_FILESYSTEMS=y
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1135,6 +1191,7 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1142,7 +1199,11 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_BINARY_PRINTF is not set
 

arch/arm/include/asm/cacheflush.h

@@ -42,7 +42,8 @@
 #endif
 
 #if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+    defined(CONFIG_CPU_ARM1026)
 # define MULTI_CACHE 1
 #endif
 
@@ -154,16 +155,16 @@
  *	Please note that the implementation of these, and the required
  *	effects are cache-type (VIVT/VIPT/PIPT) specific.
  *
- *	flush_cache_kern_all()
+ *	flush_kern_all()
  *
  *		Unconditionally clean and invalidate the entire cache.
  *
- *	flush_cache_user_mm(mm)
+ *	flush_user_all()
  *
  *		Clean and invalidate all user space cache entries
  *		before a change of page tables.
  *
- *	flush_cache_user_range(start, end, flags)
+ *	flush_user_range(start, end, flags)
  *
  *		Clean and invalidate a range of cache entries in the
  *		specified address space before a change of page tables.
@@ -179,6 +180,20 @@
  *		- start  - virtual start address
  *		- end    - virtual end address
  *
+ *	coherent_user_range(start, end)
+ *
+ *		Ensure coherency between the Icache and the Dcache in the
+ *		region described by start, end.  If you have non-snooping
+ *		Harvard caches, you need to implement this function.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	flush_kern_dcache_area(kaddr, size)
+ *
+ *		Ensure that the data held in page is written back.
+ *		- kaddr  - page address
+ *		- size   - region size
+ *
  *	DMA Cache Coherency
  *	===================
  *

arch/arm/include/asm/cpu.h

@@ -11,6 +11,7 @@
 #define __ASM_ARM_CPU_H
 
 #include <linux/percpu.h>
+#include <linux/cpu.h>
 
 struct cpuinfo_arm {
 	struct cpu	cpu;

arch/arm/include/asm/dma.h

@@ -138,12 +138,12 @@ extern int  get_dma_residue(unsigned int chan);
 #define NO_DMA	255
 #endif
 
+#endif /* CONFIG_ISA_DMA_API */
+
 #ifdef CONFIG_PCI
 extern int isa_dma_bridge_buggy;
 #else
 #define isa_dma_bridge_buggy    (0)
 #endif
 
-#endif /* CONFIG_ISA_DMA_API */
-
 #endif /* __ASM_ARM_DMA_H */

arch/arm/include/asm/ptrace.h

@@ -97,9 +97,15 @@
  * stack during a system call.  Note that sizeof(struct pt_regs)
  * has to be a multiple of 8.
  */
+#ifndef __KERNEL__
 struct pt_regs {
 	long uregs[18];
 };
+#else /* __KERNEL__ */
+struct pt_regs {
+	unsigned long uregs[18];
+};
+#endif /* __KERNEL__ */
 
 #define ARM_cpsr	uregs[16]
 #define ARM_pc		uregs[15]

arch/arm/include/asm/unistd.h

@@ -391,6 +391,7 @@
 #define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 #define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
 #define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
+#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/debug.S

@@ -49,6 +49,26 @@
 1002:
 		.endm
 
+#elif defined(CONFIG_CPU_V7)
+
+		.macro	addruart, rx
+		.endm
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c0, c5, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+busy:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	busy
+		.endm
+
+		.macro	waituart, rd, rx
+wait:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	wait
+
+		.endm
+
 #elif defined(CONFIG_CPU_XSCALE)
 
 		.macro	addruart, rx

arch/arm/kernel/elf.c

@@ -78,15 +78,6 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
 		return 1;
 	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-	/*
-	 * If we have support for OABI programs, we can never allow NX
-	 * support - our signal syscall restart mechanism relies upon
-	 * being able to execute code placed on the user stack.
-	 */
-	return 1;
-#else
 	return 0;
-#endif
 }
 EXPORT_SYMBOL(arm_elf_read_implies_exec);

arch/arm/kernel/entry-armv.S

@@ -957,9 +957,7 @@ kuser_cmpxchg_fixup:
 
 #else
 
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
-#endif
+	smp_dmb
 1:	ldrex	r3, [r2]
 	subs	r3, r3, r0
 	strexeq	r3, r1, [r2]

arch/arm/kernel/process.c

@@ -212,7 +212,8 @@ void __show_regs(struct pt_regs *regs)
 	char buf[64];
 
 	printk("CPU: %d    %s  (%s %.*s)\n",
-		smp_processor_id(), print_tainted(), init_utsname()->release,
+		raw_smp_processor_id(), print_tainted(),
+		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
 	print_symbol("PC is at %s\n", instruction_pointer(regs));

arch/arm/kernel/setup.c

@@ -102,6 +102,7 @@ struct cpu_cache_fns cpu_cache;
 #endif
 #ifdef CONFIG_OUTER_CACHE
 struct outer_cache_fns outer_cache;
+EXPORT_SYMBOL(outer_cache);
 #endif
 
 struct stack {

arch/arm/mach-davinci/board-dm355-evm.c

@@ -236,6 +236,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
 	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.i2c_adapter_id = 1,
 	.sub_devs = vpfe_sub_devs,
 	.card_name = "DM355 EVM",
 	.ccdc = "DM355 CCDC",

arch/arm/mach-davinci/board-dm365-evm.c

@@ -192,7 +192,11 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
-#ifdef CONFIG_KEYBOARD_DAVINCI
+static int dm365evm_keyscan_enable(struct device *dev)
+{
+	return davinci_cfg_reg(DM365_KEYSCAN);
+}
+
 static unsigned short dm365evm_keymap[] = {
 	KEY_KP2,
 	KEY_LEFT,
@@ -214,6 +218,7 @@ static unsigned short dm365evm_keymap[] = {
 };
 
 static struct davinci_ks_platform_data dm365evm_ks_data = {
+	.device_enable	= dm365evm_keyscan_enable,
 	.keymap		= dm365evm_keymap,
 	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
 	.rep		= 1,
@@ -222,7 +227,6 @@ static struct davinci_ks_platform_data dm365evm_ks_data = {
 	.interval	= 0x2,
 	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
 };
-#endif
 
 static int cpld_mmc_get_cd(int module)
 {
@@ -511,10 +515,7 @@ static __init void dm365_evm_init(void)
 
 	dm365_init_asp(&dm365_evm_snd_data);
 	dm365_init_rtc();
-
-#ifdef CONFIG_KEYBOARD_DAVINCI
 	dm365_init_ks(&dm365evm_ks_data);
-#endif
 }
 
 static __init void dm365_evm_irq_init(void)

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -247,6 +247,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
 	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.i2c_adapter_id = 1,
 	.sub_devs = vpfe_sub_devs,
 	.card_name = "DM6446 EVM",
 	.ccdc = "DM6446 CCDC",

arch/arm/mach-davinci/cp_intc.c

@@ -81,12 +81,23 @@ static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
 	return 0;
 }
 
+/*
+ * Faking this allows us to to work with suspend functions of
+ * generic drivers which call {enable|disable}_irq_wake for
+ * wake up interrupt sources (eg RTC on DA850).
+ */
+static int cp_intc_set_wake(unsigned int irq, unsigned int on)
+{
+	return 0;
+}
+
 static struct irq_chip cp_intc_irq_chip = {
 	.name		= "cp_intc",
 	.ack		= cp_intc_ack_irq,
 	.mask		= cp_intc_mask_irq,
 	.unmask		= cp_intc_unmask_irq,
 	.set_type	= cp_intc_set_irq_type,
+	.set_wake	= cp_intc_set_wake,
 };
 
 void __init cp_intc_init(void __iomem *base, unsigned short num_irq,

arch/arm/mach-davinci/devices-da8xx.c

@@ -481,11 +481,18 @@ static struct platform_device da8xx_rtc_device = {
 
 int da8xx_register_rtc(void)
 {
+	int ret;
+
 	/* Unlock the rtc's registers */
 	__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
 	__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
 
-	return platform_device_register(&da8xx_rtc_device);
+	ret = platform_device_register(&da8xx_rtc_device);
+	if (!ret)
+		/* Atleast on DA850, RTC is a wakeup source */
+		device_init_wakeup(&da8xx_rtc_device.dev, true);
+
+	return ret;
 }
 
 static struct resource da8xx_cpuidle_resources[] = {

arch/arm/mach-davinci/dm365.c

@@ -993,7 +993,6 @@ void __init dm365_init_asp(struct snd_platform_data *pdata)
 
 void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
 {
-	davinci_cfg_reg(DM365_KEYSCAN);
 	dm365_ks_device.dev.platform_data = pdata;
 	platform_device_register(&dm365_ks_device);
 }

arch/arm/mach-davinci/include/mach/keyscan.h

@@ -29,6 +29,7 @@ enum davinci_matrix_types {
 };
 
 struct davinci_ks_platform_data {
+	int		(*device_enable)(struct device *dev);
 	unsigned short	*keymap;
 	u32		keymapsize;
 	u8		rep:1;

arch/arm/mach-gemini/gpio.c

@@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
 	unsigned int reg_both, reg_level, reg_type;
 
 	reg_type = __raw_readl(base + GPIO_INT_TYPE);
-	reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+	reg_level = __raw_readl(base + GPIO_INT_LEVEL);
 	reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
 
 	switch (type) {
@@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
 	}
 
 	__raw_writel(reg_type, base + GPIO_INT_TYPE);
-	__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+	__raw_writel(reg_level, base + GPIO_INT_LEVEL);
 	__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
 
 	gpio_ack_irq(irq);

arch/arm/mach-gemini/include/mach/uncompress.h

@@ -30,7 +30,9 @@ static inline void putc(char c)
 	UART[UART_TX] = c;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 /*
  * nothing to do

arch/arm/mach-kirkwood/rd88f6192-nas-setup.c

@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/orion_spi.h>
@@ -53,6 +54,11 @@ static void __init rd88f6192_init(void)
 	 */
 	kirkwood_init();
 
+	orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+	if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+	    gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+		pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
 	kirkwood_sata_init(&rd88f6192_sata_data);

arch/arm/mach-lh7a40x/clocks.c

@@ -10,6 +10,8 @@
 #include <mach/hardware.h>
 #include <mach/clocks.h>
 #include <linux/err.h>
+#include <linux/device.h>
+#include <linux/string.h>
 
 struct module;
 

arch/arm/mach-mmp/ttc_dkb.c

@@ -24,8 +24,6 @@
 
 #include "common.h"
 
-#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
-
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,

arch/arm/mach-mx2/mxt_td60.c

@@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = {
 	PE9_PF_UART3_RXD,
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
-	/* UART3 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* UART4 */
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS,
-	/* UART5 */
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS,
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = {
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
 		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
@@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
 	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,

arch/arm/mach-mx25/clock.c

@@ -119,6 +119,11 @@ static unsigned long get_rate_nfc(struct clk *clk)
 	return get_rate_per(8);
 }
 
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+	return get_rate_per(5);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
 	return 48000000; /* FIXME */
@@ -144,7 +149,7 @@ static void clk_cgcr_disable(struct clk *clk)
 	__raw_writel(reg, clk->enable_reg);
 }
 
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
 		.enable_reg	= CRM_BASE + er,	\
@@ -153,26 +158,30 @@ static void clk_cgcr_disable(struct clk *clk)
 		.set_rate	= sr,			\
 		.enable		= clk_cgcr_enable,	\
 		.disable	= clk_cgcr_disable,	\
+		.secondary	= s,			\
 	}
 
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
-DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
-DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
-DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -204,15 +213,24 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
-int __init mx25_clocks_init(unsigned long fref)
+int __init mx25_clocks_init(void)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(lookups); i++)
 		clkdev_add(&lookups[i]);
 
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+	 * SCC
+	 */
+	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;

arch/arm/mach-mx25/devices.c

@@ -419,3 +419,22 @@ int __init mxc_register_gpios(void)
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
+static struct resource mx25_fec_resources[] = {
+	{
+		.start	= MX25_FEC_BASE_ADDR,
+		.end	= MX25_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_FEC,
+		.end	= MX25_INT_FEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fec_device = {
+	.name	= "fec",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
+	.resource	= mx25_fec_resources,
+};

arch/arm/mach-mx25/devices.h

@@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device;
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx25_fec_device;

arch/arm/mach-mx25/mx25pdk.c

@@ -18,10 +18,11 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
+#include <linux/fec.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
@@ -35,21 +36,62 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include "devices.h"
-#include <mach/iomux-v3.h>
+#include <mach/iomux.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct pad_desc mx25pdk_pads[] = {
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO		35
+#define FEC_RESET_B_GPIO	104
+
+static void __init mx25pdk_fec_reset(void)
+{
+	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+	udelay(2);
+
+	/* turn on PHY power and lift reset */
+	gpio_set_value(FEC_ENABLE_GPIO, 1);
+	gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
 static void __init mx25pdk_init(void)
 {
+	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+			ARRAY_SIZE(mx25pdk_pads));
+
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
+
+	mx25pdk_fec_reset();
+	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
 }
 
 static void __init mx25pdk_timer_init(void)
 {
-	mx25_clocks_init(26000000);
+	mx25_clocks_init();
 }
 
 static struct sys_timer mx25pdk_timer = {

arch/arm/mach-mx3/Kconfig

@@ -49,6 +49,7 @@ config MACH_PCM037_EET
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -63,7 +64,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	select MXC_ULPI
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.

arch/arm/mach-mx3/mm.c

@@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length		= AIPS2_SIZE,
 		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED
 	},
 };
 

arch/arm/mach-mx3/mx31ads.c

@@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq)
 }
 
 static struct irq_chip expio_irq_chip = {
+	.name = "EXPIO(CPLD)",
 	.ack = expio_ack_irq,
 	.mask = expio_mask_irq,
 	.unmask = expio_unmask_irq,
@@ -302,6 +303,7 @@ static struct regulator_init_data ldo1_data = {
 		.min_uV = 2800000,
 		.max_uV = 2800000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 };
@@ -322,6 +324,7 @@ static struct regulator_init_data ldo2_data = {
 		.min_uV = 3300000,
 		.max_uV = 3300000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
@@ -459,6 +462,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 
 static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
 	.init = mx31_wm8350_init,
+	.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
 };
 #endif
 
@@ -494,11 +498,6 @@ static void mxc_init_i2c(void)
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= SPBA0_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length		= SPBA0_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
 		.virtual	= CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
 		.length		= CS4_SIZE / 2,

arch/arm/mach-mx3/mx31lite.c

@@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
  * USB
  */
 
+#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
+#endif
 
 /*
  * NOR flash
@@ -212,11 +214,6 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
 		.virtual = CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
 		.length = CS4_SIZE,
@@ -261,11 +258,13 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
+#if defined(CONFIG_USB_ULPI)
 	/* USB */
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");

arch/arm/mach-mx3/mx31moboard-devboard.c

@@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*

arch/arm/mach-mx3/mx31moboard-marxbot.c

@@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*

arch/arm/mach-mx3/mx31moboard.c

@@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
@@ -392,8 +394,11 @@ static int __init moboard_usbh2_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
-	return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 }
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
 
 
 static struct gpio_led mx31moboard_leds[] = {

arch/arm/mach-mx3/mx31pdk.c

@@ -211,11 +211,6 @@ static int __init mx31pdk_init_expio(void)
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED,
-	}, {
 		.virtual = CS5_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
 		.length = CS5_SIZE,

arch/arm/mach-mx3/pcm037.c

@@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on)
 	return 0;
 }
 
-static struct i2c_board_info pcm037_i2c_2_devices[] = {
+static struct i2c_board_info pcm037_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("mt9t031", 0x5d),
+	}, {
+		I2C_BOARD_INFO("mt9v022", 0x48),
 	},
 };
 
-static struct soc_camera_link iclink = {
+static struct soc_camera_link iclink_mt9v022 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm037_i2c_camera[1],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
 	.bus_id		= 0,		/* Must match with the camera ID */
 	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_2_devices[0],
+	.board_info	= &pcm037_i2c_camera[0],
 	.i2c_adapter_id	= 2,
 	.module_name	= "mt9t031",
 };
@@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 	}
 };
 
-static struct platform_device pcm037_camera = {
+static struct platform_device pcm037_mt9t031 = {
 	.name	= "soc-camera-pdrv",
 	.id	= 0,
 	.dev	= {
-		.platform_data = &iclink,
+		.platform_data = &iclink_mt9t031,
+	},
+};
+
+static struct platform_device pcm037_mt9v022 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &iclink_mt9v022,
 	},
 };
 
@@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&pcm037_camera,
+	&pcm037_mt9t031,
+	&pcm037_mt9v022,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -599,7 +617,7 @@ static void __init mxc_board_init(void)
 	if (!ret)
 		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
 	else
-		iclink.power = NULL;
+		iclink_mt9t031.power = NULL;
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);

arch/arm/mach-omap1/clock.c

@@ -214,8 +214,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
 	struct mpu_rate * ptr;
 	unsigned long dpll1_rate, ref_rate;
 
-	dpll1_rate = clk_get_rate(ck_dpll1_p);
-	ref_rate = clk_get_rate(ck_ref_p);
+	dpll1_rate = ck_dpll1_p->rate;
+	ref_rate = ck_ref_p->rate;
 
 	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
 		if (ptr->xtal != ref_rate)
@@ -306,7 +306,7 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
 	long highest_rate;
 	unsigned long ref_rate;
 
-	ref_rate = clk_get_rate(ck_ref_p);
+	ref_rate = ck_ref_p->rate;
 
 	highest_rate = -EINVAL;
 

arch/arm/mach-omap1/clock_data.c

@@ -599,7 +599,7 @@ static struct clk i2c_ick = {
 static struct omap_clk omap_clks[] = {
 	/* non-ULPD clocks */
 	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	/* CK_GEN1 clocks */
 	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
 	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
@@ -627,7 +627,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
 	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
-	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
 	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
 	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
@@ -658,6 +658,10 @@ static struct omap_clk omap_clks[] = {
 	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
 	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
+	CLK("omap1_spi100k.1", "fck",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.1", "ick",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.2", "fck",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.2", "ick",	&dummy_ck,	CK_7XX),
 	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
 	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
@@ -674,7 +678,7 @@ static struct omap_clk omap_clks[] = {
  * init
  */
 
-static struct clk_functions omap1_clk_functions __initdata = {
+static struct clk_functions omap1_clk_functions = {
 	.clk_enable		= omap1_clk_enable,
 	.clk_disable		= omap1_clk_disable,
 	.clk_round_rate		= omap1_clk_round_rate,

arch/arm/mach-omap1/devices.c

@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
@@ -23,6 +24,7 @@
 #include <plat/mux.h>
 #include <mach/gpio.h>
 #include <plat/mmc.h>
+#include <plat/omap7xx.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -196,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 
 /*-------------------------------------------------------------------------*/
 
+/* OMAP7xx SPI support */
+#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+
+struct platform_device omap_spi1 = {
+	.name           = "omap1_spi100k",
+	.id             = 1,
+};
+
+struct platform_device omap_spi2 = {
+	.name           = "omap1_spi100k",
+	.id             = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+	if (omap_spi1.dev.platform_data)
+		platform_device_register(&omap_spi1);
+
+	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+	if (omap_spi2.dev.platform_data)
+		platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #if defined(CONFIG_OMAP_STI)
 
 #define OMAP1_STI_BASE		0xfffea000
@@ -263,6 +297,7 @@ static int __init omap1_init_devices(void)
 
 	omap_init_mbox();
 	omap_init_rtc();
+	omap_init_spi100k();
 	omap_init_sti();
 
 	return 0;

arch/arm/mach-omap1/mux.c

@@ -62,6 +62,14 @@ MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
 /* I2C interface */
 MUX_CFG_7XX("I2C_7XX_SCL",         5,    1,    0,    0,   1, 0)
 MUX_CFG_7XX("I2C_7XX_SDA",         5,    5,    0,    0,   1, 0)
+
+/* SPI pins */
+MUX_CFG_7XX("SPI_7XX_1",           6,    5,    4,    4,   1, 0)
+MUX_CFG_7XX("SPI_7XX_2",           6,    9,    4,    8,   1, 0)
+MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
+MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
+MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
+MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
 };
 #define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
 #else

arch/arm/mach-omap2/Kconfig

@@ -80,6 +80,7 @@ config MACH_OVERO
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -63,21 +63,21 @@ static int board_keymap[] = {
 	KEY(5, 1, KEY_H),
 	KEY(5, 2, KEY_J),
 	KEY(5, 3, KEY_F3),
+	KEY(5, 4, KEY_UNKNOWN),
 	KEY(5, 5, KEY_VOLUMEDOWN),
 	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_ENTER),
+	KEY(5, 7, KEY_RIGHT),
 	KEY(6, 0, KEY_Q),
 	KEY(6, 1, KEY_A),
 	KEY(6, 2, KEY_N),
 	KEY(6, 3, KEY_BACKSPACE),
 	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_SELECT),
+	KEY(6, 7, KEY_UP),
 	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
 	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
 	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
 	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 5, KEY_RIGHT),
-	KEY(7, 6, KEY_UP),
+	KEY(7, 6, KEY_SELECT),
 	KEY(7, 7, KEY_DOWN)
 };
 

arch/arm/mach-omap2/clock2xxx.c

@@ -449,40 +449,78 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 #ifdef CONFIG_CPU_FREQ
 /*
  * Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
  */
-static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+static struct cpufreq_frequency_table *freq_table;
 
 void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 {
-	struct prcm_config *prcm;
+	const struct prcm_config *prcm;
+	long sys_ck_rate;
 	int i = 0;
+	int tbl_sz = 0;
+
+	sys_ck_rate = clk_get_rate(sclk);
 
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
+		if (prcm->xtal_speed != sys_ck_rate)
 			continue;
 
 		/* don't put bypass rates in table */
 		if (prcm->dpll_speed == prcm->xtal_speed)
 			continue;
 
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
+		tbl_sz++;
 	}
 
-	if (i == 0) {
-		printk(KERN_WARNING "%s: failed to initialize frequency "
-		       "table\n", __func__);
+	/*
+	 * XXX Ensure that we're doing what CPUFreq expects for this error
+	 * case and the following one
+	 */
+	if (tbl_sz == 0) {
+		pr_warning("%s: no matching entries in rate_table\n",
+			   __func__);
+		return;
+	}
+
+	/* Include the CPUFREQ_TABLE_END terminator entry */
+	tbl_sz++;
+
+	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+			     GFP_ATOMIC);
+	if (!freq_table) {
+		pr_err("%s: could not kzalloc frequency table\n", __func__);
 		return;
 	}
 
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		freq_table[i].index = i;
+		freq_table[i].frequency = prcm->mpu_speed / 1000;
+		i++;
+	}
+
 	freq_table[i].index = i;
 	freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	*table = &freq_table[0];
 }
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	kfree(freq_table);
+}
+
 #endif
 
 struct clk_functions omap2_clk_functions = {
@@ -494,6 +532,7 @@ struct clk_functions omap2_clk_functions = {
 	.clk_disable_unused	= omap2_clk_disable_unused,
 #ifdef	CONFIG_CPU_FREQ
 	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
+	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
 #endif
 };
 

arch/arm/mach-omap2/clock34xx.c

@@ -34,7 +34,6 @@
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include <plat/sdrc.h>
 #include "clock.h"
 #include "clock34xx.h"
 #include "sdrc.h"

arch/arm/mach-omap2/clock34xx_data.c

@@ -671,7 +671,6 @@ static struct clk dpll4_m3x2_ck = {
 	.name		= "dpll4_m3x2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m3_ck,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
 	.flags		= INVERT_ENABLE,
@@ -776,6 +775,8 @@ static struct clk dpll4_m5_ck = {
 	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
 	.clksel		= div16_dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -809,7 +810,6 @@ static struct clk dpll4_m6x2_ck = {
 	.name		= "dpll4_m6x2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m6_ck,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
 	.flags		= INVERT_ENABLE,
@@ -1045,7 +1045,6 @@ static struct clk iva2_ck = {
 	.name		= "iva2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll2_m2_ck,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
 	.clkdm_name	= "iva2_clkdm",
@@ -1119,7 +1118,6 @@ static struct clk gfx_l3_ck = {
 	.name		= "gfx_l3_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP_EN_GFX_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1500,6 +1498,7 @@ static struct clk uart2_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1509,6 +1508,7 @@ static struct clk uart1_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2745,7 +2745,7 @@ static struct clk mcbsp4_ick = {
 };
 
 static const struct clksel mcbsp_234_clksel[] = {
-	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &per_96m_fck,  .rates = common_mcbsp_96m_rates },
 	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
 	{ .parent = NULL }
 };

arch/arm/mach-omap2/clock44xx_data.c

@@ -346,37 +346,37 @@ static struct clk aess_fclk = {
 };
 
 static const struct clksel_rate div31_1to31_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 3, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 3, .flags = RATE_IN_4430 },
-	{ .div = 5, .val = 4, .flags = RATE_IN_4430 },
-	{ .div = 6, .val = 5, .flags = RATE_IN_4430 },
-	{ .div = 7, .val = 6, .flags = RATE_IN_4430 },
-	{ .div = 8, .val = 7, .flags = RATE_IN_4430 },
-	{ .div = 9, .val = 8, .flags = RATE_IN_4430 },
-	{ .div = 10, .val = 9, .flags = RATE_IN_4430 },
-	{ .div = 11, .val = 10, .flags = RATE_IN_4430 },
-	{ .div = 12, .val = 11, .flags = RATE_IN_4430 },
-	{ .div = 13, .val = 12, .flags = RATE_IN_4430 },
-	{ .div = 14, .val = 13, .flags = RATE_IN_4430 },
-	{ .div = 15, .val = 14, .flags = RATE_IN_4430 },
-	{ .div = 16, .val = 15, .flags = RATE_IN_4430 },
-	{ .div = 17, .val = 16, .flags = RATE_IN_4430 },
-	{ .div = 18, .val = 17, .flags = RATE_IN_4430 },
-	{ .div = 19, .val = 18, .flags = RATE_IN_4430 },
-	{ .div = 20, .val = 19, .flags = RATE_IN_4430 },
-	{ .div = 21, .val = 20, .flags = RATE_IN_4430 },
-	{ .div = 22, .val = 21, .flags = RATE_IN_4430 },
-	{ .div = 23, .val = 22, .flags = RATE_IN_4430 },
-	{ .div = 24, .val = 23, .flags = RATE_IN_4430 },
-	{ .div = 25, .val = 24, .flags = RATE_IN_4430 },
-	{ .div = 26, .val = 25, .flags = RATE_IN_4430 },
-	{ .div = 27, .val = 26, .flags = RATE_IN_4430 },
-	{ .div = 28, .val = 27, .flags = RATE_IN_4430 },
-	{ .div = 29, .val = 28, .flags = RATE_IN_4430 },
-	{ .div = 30, .val = 29, .flags = RATE_IN_4430 },
-	{ .div = 31, .val = 30, .flags = RATE_IN_4430 },
+	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 3, .val = 3, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 4, .flags = RATE_IN_4430 },
+	{ .div = 5, .val = 5, .flags = RATE_IN_4430 },
+	{ .div = 6, .val = 6, .flags = RATE_IN_4430 },
+	{ .div = 7, .val = 7, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 8, .flags = RATE_IN_4430 },
+	{ .div = 9, .val = 9, .flags = RATE_IN_4430 },
+	{ .div = 10, .val = 10, .flags = RATE_IN_4430 },
+	{ .div = 11, .val = 11, .flags = RATE_IN_4430 },
+	{ .div = 12, .val = 12, .flags = RATE_IN_4430 },
+	{ .div = 13, .val = 13, .flags = RATE_IN_4430 },
+	{ .div = 14, .val = 14, .flags = RATE_IN_4430 },
+	{ .div = 15, .val = 15, .flags = RATE_IN_4430 },
+	{ .div = 16, .val = 16, .flags = RATE_IN_4430 },
+	{ .div = 17, .val = 17, .flags = RATE_IN_4430 },
+	{ .div = 18, .val = 18, .flags = RATE_IN_4430 },
+	{ .div = 19, .val = 19, .flags = RATE_IN_4430 },
+	{ .div = 20, .val = 20, .flags = RATE_IN_4430 },
+	{ .div = 21, .val = 21, .flags = RATE_IN_4430 },
+	{ .div = 22, .val = 22, .flags = RATE_IN_4430 },
+	{ .div = 23, .val = 23, .flags = RATE_IN_4430 },
+	{ .div = 24, .val = 24, .flags = RATE_IN_4430 },
+	{ .div = 25, .val = 25, .flags = RATE_IN_4430 },
+	{ .div = 26, .val = 26, .flags = RATE_IN_4430 },
+	{ .div = 27, .val = 27, .flags = RATE_IN_4430 },
+	{ .div = 28, .val = 28, .flags = RATE_IN_4430 },
+	{ .div = 29, .val = 29, .flags = RATE_IN_4430 },
+	{ .div = 30, .val = 30, .flags = RATE_IN_4430 },
+	{ .div = 31, .val = 31, .flags = RATE_IN_4430 },
 	{ .div = 0 },
 };
 

arch/arm/mach-omap2/clockdomain.c

@@ -559,7 +559,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk)
+	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
 		return -EINVAL;
 
 	if (atomic_inc_return(&clkdm->usecount) > 1)
@@ -610,7 +610,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk)
+	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
 		return -EINVAL;
 
 #ifdef DEBUG

arch/arm/mach-omap2/cpuidle34xx.c

@@ -137,7 +137,7 @@ return_sleep_time:
 	local_irq_enable();
 	local_fiq_enable();
 
-	return (u32)timespec_to_ns(&ts_idle)/1000;
+	return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
 }
 
 /**

arch/arm/mach-omap2/gpmc.c

@@ -505,7 +505,7 @@ static void __init gpmc_mem_init(void)
 void __init gpmc_init(void)
 {
 	u32 l;
-	char *ck;
+	char *ck = NULL;
 
 	if (cpu_is_omap24xx()) {
 		ck = "core_l3_ck";
@@ -521,6 +521,9 @@ void __init gpmc_init(void)
 		l = OMAP44XX_GPMC_BASE;
 	}
 
+	if (WARN_ON(!ck))
+		return;
+
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
 		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
@@ -534,6 +537,8 @@ void __init gpmc_init(void)
 		BUG();
 	}
 
+	clk_enable(gpmc_l3_clk);
+
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
 	/* Set smart idle mode and automatic L3 clock gating */

arch/arm/mach-omap2/id.c

@@ -188,6 +188,8 @@ void __init omap3_check_revision(void)
 	u16 hawkeye;
 	u8 rev;
 
+	omap_chip.oc = CHIP_IS_OMAP3430;
+
 	/*
 	 * We cannot access revision registers on ES1.0.
 	 * If the processor type is Cortex-A8 and the revision is 0x0
@@ -196,6 +198,7 @@ void __init omap3_check_revision(void)
 	cpuid = read_cpuid(CPUID_ID);
 	if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
 		omap_revision = OMAP3430_REV_ES1_0;
+		omap_chip.oc |= CHIP_IS_OMAP3430ES1;
 		return;
 	}
 
@@ -216,18 +219,28 @@ void __init omap3_check_revision(void)
 		case 0: /* Take care of early samples */
 		case 1:
 			omap_revision = OMAP3430_REV_ES2_0;
+			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
 			break;
 		case 2:
 			omap_revision = OMAP3430_REV_ES2_1;
+			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
 			break;
 		case 3:
 			omap_revision = OMAP3430_REV_ES3_0;
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
 			break;
 		case 4:
+			omap_revision = OMAP3430_REV_ES3_1;
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+			break;
+		case 7:
 		/* FALLTHROUGH */
 		default:
 			/* Use the latest known revision as default */
-			omap_revision = OMAP3430_REV_ES3_1;
+			omap_revision = OMAP3430_REV_ES3_1_2;
+
+			/* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 		}
 		break;
 	case 0xb868:
@@ -235,14 +248,18 @@ void __init omap3_check_revision(void)
 		 *
 		 * Set the device to be OMAP3505 here. Actual device
 		 * is identified later based on the features.
+		 *
+		 * REVISIT: AM3505/AM3517 should have their own CHIP_IS
 		 */
 		omap_revision = OMAP3505_REV(rev);
+		omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 		break;
 	case 0xb891:
 	/* FALLTHROUGH */
 	default:
 		/* Unknown default to latest silicon rev as default*/
 		omap_revision = OMAP3630_REV_ES1_0;
+		omap_chip.oc |= CHIP_IS_OMAP3630ES1;
 	}
 }
 
@@ -360,6 +377,7 @@ void __init omap2_check_revision(void)
 		omap3_check_revision();
 		omap3_check_features();
 		omap3_cpuinfo();
+		return;
 	} else if (cpu_is_omap44xx()) {
 		omap4_check_revision();
 		return;
@@ -374,27 +392,14 @@ void __init omap2_check_revision(void)
 	if (cpu_is_omap243x()) {
 		/* Currently only supports 2430ES2.1 and 2430-all */
 		omap_chip.oc |= CHIP_IS_OMAP2430;
+		return;
 	} else if (cpu_is_omap242x()) {
 		/* Currently only supports 2420ES2.1.1 and 2420-all */
 		omap_chip.oc |= CHIP_IS_OMAP2420;
-	} else if (cpu_is_omap3505() || cpu_is_omap3517()) {
-		omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
-	} else if (cpu_is_omap343x()) {
-		omap_chip.oc = CHIP_IS_OMAP3430;
-		if (omap_rev() == OMAP3430_REV_ES1_0)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES1;
-		else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
-			 omap_rev() <= OMAP3430_REV_ES2_1)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
-		else if (omap_rev() == OMAP3430_REV_ES3_0)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
-		else if (omap_rev() == OMAP3430_REV_ES3_1)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
-		else if (omap_rev() == OMAP3630_REV_ES1_0)
-			omap_chip.oc |= CHIP_IS_OMAP3630ES1;
-	} else {
-		pr_err("Uninitialized omap_chip, please fix!\n");
+		return;
 	}
+
+	pr_err("Uninitialized omap_chip, please fix!\n");
 }
 
 /*

arch/arm/mach-omap2/io.c

@@ -33,7 +33,6 @@
 #include <plat/sdrc.h>
 #include <plat/gpmc.h>
 #include <plat/serial.h>
-#include <plat/mux.h>
 #include <plat/vram.h>
 
 #include "clock.h"
@@ -73,21 +72,21 @@ static struct map_desc omap24xx_io_desc[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP2420
 static struct map_desc omap242x_io_desc[] __initdata = {
 	{
-		.virtual	= DSP_MEM_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MEM_24XX_PHYS),
-		.length		= DSP_MEM_24XX_SIZE,
+		.virtual	= DSP_MEM_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MEM_2420_PHYS),
+		.length		= DSP_MEM_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_IPI_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_IPI_24XX_PHYS),
-		.length		= DSP_IPI_24XX_SIZE,
+		.virtual	= DSP_IPI_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_IPI_2420_PHYS),
+		.length		= DSP_IPI_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_MMU_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MMU_24XX_PHYS),
-		.length		= DSP_MMU_24XX_SIZE,
+		.virtual	= DSP_MMU_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MMU_2420_PHYS),
+		.length		= DSP_MMU_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 };

arch/arm/mach-omap2/irq.c

@@ -194,7 +194,7 @@ void __init omap_init_irq(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-		unsigned long base;
+		unsigned long base = 0;
 		struct omap_irq_bank *bank = irq_banks + i;
 
 		if (cpu_is_omap24xx())
@@ -202,6 +202,8 @@ void __init omap_init_irq(void)
 		else if (cpu_is_omap34xx())
 			base = OMAP34XX_IC_BASE;
 
+		BUG_ON(!base);
+
 		/* Static mapping, never released */
 		bank->base_reg = ioremap(base, SZ_4K);
 		if (!bank->base_reg) {
@@ -274,4 +276,22 @@ void omap_intc_restore_context(void)
 	}
 	/* MIRs are saved and restore with other PRCM registers */
 }
+
+void omap3_intc_suspend(void)
+{
+	/* A pending interrupt would prevent OMAP from entering suspend */
+	omap_ack_irq(0);
+}
+
+void omap3_intc_prepare_idle(void)
+{
+	/* Disable autoidle as it can stall interrupt controller */
+	intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
+}
+
+void omap3_intc_resume_idle(void)
+{
+	/* Re-enable autoidle */
+	intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
+}
 #endif /* CONFIG_ARCH_OMAP3 */

arch/arm/mach-omap2/mmc-twl4030.c

@@ -408,6 +408,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 {
 	struct twl4030_hsmmc_info *c;
 	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+	int i;
 
 	if (cpu_is_omap2430()) {
 		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
@@ -434,7 +435,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
 		if (!mmc) {
 			pr_err("Cannot allocate memory for mmc device!\n");
-			return;
+			goto done;
 		}
 
 		if (c->name)
@@ -532,6 +533,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			continue;
 		c->dev = mmc->dev;
 	}
+
+done:
+	for (i = 0; i < nr_hsmmc; i++)
+		kfree(hsmmc_data[i]);
 }
 
 #endif

arch/arm/mach-omap2/mux.c

@@ -51,7 +51,7 @@ struct omap_mux_entry {
 static unsigned long mux_phys;
 static void __iomem *mux_base;
 
-static inline u16 omap_mux_read(u16 reg)
+u16 omap_mux_read(u16 reg)
 {
 	if (cpu_is_omap24xx())
 		return __raw_readb(mux_base + reg);
@@ -59,7 +59,7 @@ static inline u16 omap_mux_read(u16 reg)
 		return __raw_readw(mux_base + reg);
 }
 
-static inline void omap_mux_write(u16 val, u16 reg)
+void omap_mux_write(u16 val, u16 reg)
 {
 	if (cpu_is_omap24xx())
 		__raw_writeb(val, mux_base + reg);
@@ -67,6 +67,14 @@ static inline void omap_mux_write(u16 val, u16 reg)
 		__raw_writew(val, mux_base + reg);
 }
 
+void omap_mux_write_array(struct omap_board_mux *board_mux)
+{
+	while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
+		omap_mux_write(board_mux->value, board_mux->reg_offset);
+		board_mux++;
+	}
+}
+
 #if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
@@ -478,7 +486,7 @@ int __init omap_mux_init_signal(char *muxname, int val)
 static inline void omap_mux_decode(struct seq_file *s, u16 val)
 {
 	char *flags[OMAP_MUX_MAX_NR_FLAGS];
-	char mode[14];
+	char mode[sizeof("OMAP_MUX_MODE") + 1];
 	int i = -1;
 
 	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
@@ -545,6 +553,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
 		if (!m0_name)
 			continue;
 
+		/* REVISIT: Needs to be updated if mode0 names get longer */
 		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
 			if (m0_name[i] == '\0') {
 				m0_def[i] = m0_name[i];
@@ -833,14 +842,6 @@ static void __init omap_mux_set_cmdline_signals(void)
 	kfree(options);
 }
 
-static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
-{
-	while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
-		omap_mux_write(board_mux->value, board_mux->reg_offset);
-		board_mux++;
-	}
-}
-
 static int __init omap_mux_copy_names(struct omap_mux *src,
 					struct omap_mux *dst)
 {
@@ -960,7 +961,12 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
 	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
 		struct omap_mux *entry;
 
-#ifndef CONFIG_OMAP_MUX
+#ifdef CONFIG_OMAP_MUX
+		if (!superset->muxnames || !superset->muxnames[0]) {
+			superset++;
+			continue;
+		}
+#else
 		/* Skip pins that are not muxed as GPIO by bootloader */
 		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
 			superset++;
@@ -994,14 +1000,19 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 	}
 
 #ifdef CONFIG_OMAP_MUX
-	omap_mux_package_fixup(package_subset, superset);
-	omap_mux_package_init_balls(package_balls, superset);
-	omap_mux_set_cmdline_signals();
-	omap_mux_set_board_signals(board_mux);
+	if (package_subset)
+		omap_mux_package_fixup(package_subset, superset);
+	if (package_balls)
+		omap_mux_package_init_balls(package_balls, superset);
 #endif
 
 	omap_mux_init_list(superset);
 
+#ifdef CONFIG_OMAP_MUX
+	omap_mux_set_cmdline_signals();
+	omap_mux_write_array(board_mux);
+#endif
+
 	return 0;
 }
 

arch/arm/mach-omap2/mux.h

@@ -146,6 +146,30 @@ u16 omap_mux_get_gpio(int gpio);
  */
 void omap_mux_set_gpio(u16 val, int gpio);
 
+/**
+ * omap_mux_read() - read mux register
+ * @mux_offset:		Offset of the mux register
+ *
+ */
+u16 omap_mux_read(u16 mux_offset);
+
+/**
+ * omap_mux_write() - write mux register
+ * @val:		New mux register value
+ * @mux_offset:		Offset of the mux register
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write(u16 val, u16 mux_offset);
+
+/**
+ * omap_mux_write_array() - write an array of mux registers
+ * @board_mux:		Array of mux registers terminated by MAP_MUX_TERMINATOR
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write_array(struct omap_board_mux *board_mux);
+
 /**
  * omap3_mux_init() - initialize mux system with board specific set
  * @board_mux:		Board specific mux table

arch/arm/mach-omap2/mux34xx.c

@@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
 	_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
 		"uart3_tx_irtx", NULL, NULL, NULL,
 		"gpio_166", NULL, NULL, "safe_mode"),
+
+	/* Only on 3630, see omap36xx_cbp_subset for the signals */
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -94,7 +94,8 @@ static int _update_sysc_cache(struct omap_hwmod *oh)
 
 	oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
 
-	oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+	if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
+		oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
 
 	return 0;
 }

arch/arm/mach-omap2/opp2420_data.c

@@ -9,45 +9,47 @@
  * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
  * These configurations are characterized by voltage and speed for clocks.
  * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
  * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
+ * setting. All configurations can be described by a DPLL setting and a ratio.
  *
  * XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
  *
  * THe format described in this file is deprecated.  Once a reasonable
  * OPP API exists, the data in this file should be converted to use it.
  *
  * This is technically part of the OMAP2xxx clock code.
+ *
+ * Considerable work is still needed to fully support dynamic frequency
+ * changes on OMAP2xxx-series chips.  Readers interested in such a
+ * project are encouraged to review the Maemo Diablo RX-34 and RX-44
+ * kernel source at:
+ *     http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
  */
 
 #include "opp2xxx.h"
 #include "sdrc.h"
 #include "clock.h"
 
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
  * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
  * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
  *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on H4 boards available.  There are quite a
+ * few more rate combinations which could be defined.
  *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used.  Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set.  The exception is the bypass
+ * setting which is available for low power bypass.
  *
  * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ **/
 const struct prcm_config omap2420_rate_table[] = {
 	/* PRCM I - FAST */
 	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */

arch/arm/mach-omap2/opp2430_data.c

@@ -1,5 +1,5 @@
 /*
- * opp2420_data.c - old-style "OPP" table for OMAP2420
+ * opp2430_data.c - old-style "OPP" table for OMAP2430
  *
  * Copyright (C) 2005-2009 Texas Instruments, Inc.
  * Copyright (C) 2004-2009 Nokia Corporation
@@ -9,16 +9,16 @@
  * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
  * These configurations are characterized by voltage and speed for clocks.
  * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
  * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ * setting. All configurations can be described by a DPLL setting and a ratio.
  *
  * 2430 differs from 2420 in that there are no more phase synchronizers used.
  * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
  * 2430 (iva2.1, NOdsp, mdm)
  *
  * XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets.
  *
  * THe format described in this file is deprecated.  Once a reasonable
  * OPP API exists, the data in this file should be converted to use it.
@@ -30,24 +30,24 @@
 #include "sdrc.h"
 #include "clock.h"
 
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
  * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
  * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
  *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on 2430-SDPs variants available.  There are
+ * quite a few more rate combinations which could be defined.
  *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used.  Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set.  The exception is the bypass
+ * setting which is available for low power bypass.
  *
  * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ */
 const struct prcm_config omap2430_rate_table[] = {
 	/* PRCM #4 - ratio2 (ES2.1) - FAST */
 	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */

arch/arm/mach-omap2/pm-debug.c

@@ -54,8 +54,6 @@ int omap2_pm_debug;
 	regs[reg_count++].val = \
 			 __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
 
-static int __init pm_dbg_init(void);
-
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
 	struct reg {
@@ -167,6 +165,8 @@ struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
 
+static int __init pm_dbg_init(void);
+
 enum {
 	DEBUG_FILE_COUNTERS = 0,
 	DEBUG_FILE_TIMERS,
@@ -488,9 +488,11 @@ int pm_dbg_regset_init(int reg_set)
 
 static int pwrdm_suspend_get(void *data, u64 *val)
 {
-	*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+	int ret;
+	ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+	*val = ret;
 
-	if (*val >= 0)
+	if (ret >= 0)
 		return 0;
 	return *val;
 }
@@ -604,6 +606,4 @@ static int __init pm_dbg_init(void)
 }
 arch_initcall(pm_dbg_init);
 
-#else
-void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
 #endif

arch/arm/mach-omap2/pm.h

@@ -32,12 +32,16 @@ extern struct omap_dm_timer *gptimer_wakeup;
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_debug				0
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 extern int pm_dbg_regset_save(int reg_set);
 extern int pm_dbg_regset_init(int reg_set);
 #else
-#define omap2_pm_dump(mode, resume, us)		do {} while (0);
-#define omap2_pm_debug				0
 #define pm_dbg_update_time(pwrdm, prev) do {} while (0);
 #define pm_dbg_regset_save(reg_set) do {} while (0);
 #define pm_dbg_regset_init(reg_set) do {} while (0);

arch/arm/mach-omap2/pm34xx.c

@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -124,9 +125,17 @@ static void omap3_core_save_context(void)
 	control_padconf_off |= START_PADCONF_SAVE;
 	omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
 	/* wait for the save to complete */
-	while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
-			& PADCONF_SAVE_DONE)
-		;
+	while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+			& PADCONF_SAVE_DONE))
+		udelay(1);
+
+	/*
+	 * Force write last pad into memory, as this can fail in some
+	 * cases according to erratas 1.157, 1.185
+	 */
+	omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
+		OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
+
 	/* Save the Interrupt controller context */
 	omap_intc_save_context();
 	/* Save the GPMC context */
@@ -392,6 +401,7 @@ void omap_sram_idle(void)
 		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
 		omap3_enable_io_chain();
 	}
+	omap3_intc_prepare_idle();
 
 	/*
 	* On EMU/HS devices ROM code restores a SRDC value
@@ -438,6 +448,7 @@ void omap_sram_idle(void)
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
 	}
+	omap3_intc_resume_idle();
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
@@ -578,6 +589,8 @@ static int omap3_pm_suspend(void)
 	}
 
 	omap_uart_prepare_suspend();
+	omap3_intc_suspend();
+
 	omap_sram_idle();
 
 restore:
@@ -835,6 +848,8 @@ static void __init prcm_setup_regs(void)
 			CM_AUTOIDLE);
 	}
 
+	omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+
 	/*
 	 * Set all plls to autoidle. This is needed until autoidle is
 	 * enabled by clockfw
@@ -875,15 +890,23 @@ static void __init prcm_setup_regs(void)
 	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
+	/* Enable PM_WKEN to support DSS LPR */
+	prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+				OMAP3430_DSS_MOD, PM_WKEN);
+
 	/* Enable wakeups in PER */
 	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
+			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+			  OMAP3430_EN_MCBSP4,
 			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
 	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
+			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+			  OMAP3430_EN_MCBSP4,
 			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
 	/* Don't attach IVA interrupts */
@@ -904,24 +927,6 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	/* Don't attach IVA interrupts */
-	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
-
-	/* Clear any pending 'reset' flags */
-	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
-
-	/* Clear any pending PRCM interrupts */
-	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
 	omap3_iva_idle();
 	omap3_d2d_idle();
 }

arch/arm/mach-omap2/prcm.c

@@ -44,7 +44,6 @@ struct omap3_prcm_regs {
 	u32 iva2_cm_clksel2;
 	u32 cm_sysconfig;
 	u32 sgx_cm_clksel;
-	u32 wkup_cm_clksel;
 	u32 dss_cm_clksel;
 	u32 cam_cm_clksel;
 	u32 per_cm_clksel;
@@ -53,7 +52,6 @@ struct omap3_prcm_regs {
 	u32 pll_cm_autoidle2;
 	u32 pll_cm_clksel4;
 	u32 pll_cm_clksel5;
-	u32 pll_cm_clken;
 	u32 pll_cm_clken2;
 	u32 cm_polctrl;
 	u32 iva2_cm_fclken;
@@ -77,7 +75,6 @@ struct omap3_prcm_regs {
 	u32 usbhost_cm_iclken;
 	u32 iva2_cm_autiidle2;
 	u32 mpu_cm_autoidle2;
-	u32 pll_cm_autoidle;
 	u32 iva2_cm_clkstctrl;
 	u32 mpu_cm_clkstctrl;
 	u32 core_cm_clkstctrl;
@@ -274,7 +271,6 @@ void omap3_prcm_save_context(void)
 	prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
 	prcm_context.sgx_cm_clksel =
 			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
-	prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
 	prcm_context.dss_cm_clksel =
 			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
 	prcm_context.cam_cm_clksel =
@@ -291,8 +287,6 @@ void omap3_prcm_save_context(void)
 			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
 	prcm_context.pll_cm_clksel5 =
 			 cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
-	prcm_context.pll_cm_clken =
-			cm_read_mod_reg(PLL_MOD, CM_CLKEN);
 	prcm_context.pll_cm_clken2 =
 			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
 	prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
@@ -338,8 +332,6 @@ void omap3_prcm_save_context(void)
 			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
 	prcm_context.mpu_cm_autoidle2 =
 			 cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
-	prcm_context.pll_cm_autoidle =
-			 cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
 	prcm_context.iva2_cm_clkstctrl =
 			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
 	prcm_context.mpu_cm_clkstctrl =
@@ -431,7 +423,6 @@ void omap3_prcm_restore_context(void)
 	__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
 	cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
 					 CM_CLKSEL);
-	cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
 	cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
 					 CM_CLKSEL);
 	cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
@@ -448,7 +439,6 @@ void omap3_prcm_restore_context(void)
 					OMAP3430ES2_CM_CLKSEL4);
 	cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
 					 OMAP3430ES2_CM_CLKSEL5);
-	cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
 	cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
 					OMAP3430ES2_CM_CLKEN2);
 	__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
@@ -487,7 +477,6 @@ void omap3_prcm_restore_context(void)
 	cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
 					CM_AUTOIDLE2);
 	cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
-	cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
 	cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
 					CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);

arch/arm/mach-omap2/prm.h

@@ -24,6 +24,8 @@
 		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 #define OMAP44XX_PRM_REGADDR(module, reg)				\
 		OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
+#define OMAP44XX_CHIRONSS_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
 
 #include "prm44xx.h"
 

arch/arm/mach-omap2/prm44xx.h

@@ -386,26 +386,26 @@
 
 
 /* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
-#define OMAP4430_REVISION_PRCM				OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+#define OMAP4430_REVISION_PRCM				OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
 
 /* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
-#define OMAP4430_CHIRON_PRCM_PRM_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+#define OMAP4430_CHIRON_PRCM_PRM_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
 
 /* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
-#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU0_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU0_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
 
 /* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
-#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU1_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU1_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
 #endif

arch/arm/mach-omap2/serial.c

@@ -36,7 +36,13 @@
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
-#define DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * NOTE: By default the serial timeout is disabled as it causes lost characters
+ * over the serial ports. This means that the UART clocks will stay on until
+ * disabled via sysfs. This also causes that any deeper omap sleep states are
+ * blocked. 
+ */
+#define DEFAULT_TIMEOUT 0
 
 struct omap_uart_state {
 	int num;
@@ -125,6 +131,13 @@ static struct plat_serial8250_port serial_platform_data3[] = {
 	}
 };
 #endif
+static inline unsigned int __serial_read_reg(struct uart_port *up,
+					   int offset)
+{
+	offset <<= up->regshift;
+	return (unsigned int)__raw_readb(up->membase + offset);
+}
+
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
 {
@@ -415,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
-	mod_timer(&uart->timer, jiffies + uart->timeout);
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
 	omap_uart_smart_idle_enable(uart, 0);
 
 	if (cpu_is_omap34xx()) {
@@ -583,11 +597,12 @@ static unsigned int serial_in_override(struct uart_port *up, int offset)
 {
 	if (UART_RX == offset) {
 		unsigned int lsr;
-		lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR);
+		lsr = __serial_read_reg(up, UART_LSR);
 		if (!(lsr & UART_LSR_DR))
 			return -EPERM;
 	}
-	return serial_read_reg(omap_uart[up->line].p, offset);
+
+	return __serial_read_reg(up, offset);
 }
 
 void __init omap_serial_early_init(void)

arch/arm/mach-omap2/sleep34xx.S

@@ -245,7 +245,8 @@ restore:
 	mov	r1, #0		@ set task id for ROM code in r1
 	mov	r2, #4		@ set some flags in r2, r6
 	mov	r6, #0xff
-	adr	r3, write_aux_control_params	@ r3 points to parameters
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4, #0xBC]	@ r3 points to parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
@@ -253,14 +254,14 @@ restore:
 	b	logic_l1_restore
 l2_inv_api_params:
 	.word   0x1, 0x00
-write_aux_control_params:
-	.word   0x1, 0x72
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1                         @ set up to invalide L2
 smi:    .word 0xE1600070		@ Call SMI monitor (smieq)
 	/* Write to Aux control register to set some bits */
-	mov	r0, #0x72
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4,#0xBC]
+	ldr	r0, [r3,#4]
 	mov	r12, #0x3
 	.word 0xE1600070	@ Call SMI monitor (smieq)
 logic_l1_restore:
@@ -271,6 +272,7 @@ logic_l1_restore:
 
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
+	adds	r3, r3, #8
 	ldmia	r3!, {r4-r6}
 	mov	sp, r4
 	msr	spsr_cxsf, r5
@@ -387,6 +389,9 @@ usettbr0:
 save_context_wfi:
 	/*b	save_context_wfi*/	@ enable to debug save code
 	mov	r8, r0 /* Store SDRAM address in r8 */
+	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
+	mov	r4, #0x1		@ Number of parameters for restore call
+	stmia	r8!, {r4-r5}
         /* Check what that target sleep state is:stored in r1*/
         /* 1 - Only L1 and logic lost */
         /* 2 - Only L2 lost */

arch/arm/mach-orion5x/dns323-setup.c

@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
@@ -32,6 +33,7 @@
 
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
+#define DNS323_GPIO_SYSTEM_UP		3
 #define DNS323_GPIO_LED_POWER		5
 #define DNS323_GPIO_OVERTEMP		6
 #define DNS323_GPIO_RTC			7
@@ -239,7 +241,7 @@ static struct gpio_led dns323_leds[] = {
 	{
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER,
-		.active_low = 1,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -334,7 +336,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
 	{  0, MPP_UNUSED },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
-	{  3, MPP_UNUSED },
+	{  3, MPP_GPIO },		/* system up flag */
 	{  4, MPP_GPIO },		/* power button LED */
 	{  5, MPP_GPIO },		/* power button LED */
 	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
@@ -372,13 +374,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	},
 };
 
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
 {
 	pr_info("%s: triggering power-off...\n", __func__);
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+	pr_info("%s: triggering power-off...\n", __func__);
+	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+	mdelay(100);
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
@@ -424,11 +436,20 @@ static void __init dns323_init(void)
 	if (dns323_dev_id() == MV88F5182_DEV_ID)
 		orion5x_sata_init(&dns323_sata_data);
 
-	/* register dns323 specific power-off method */
+	/* The 5182 has flag to indicate the system is up. Without this flag
+	 * set, power LED will flash and cannot be controlled via leds-gpio.
+	 */
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+	/* Register dns323 specific power-off method */
 	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 		pr_err("DNS323: failed to setup power-off GPIO\n");
-	pm_power_off = dns323_power_off;
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		pm_power_off = dns323b_power_off;
+	else
+		pm_power_off = dns323a_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */

arch/arm/mach-orion5x/wrt350n-v2-setup.c

@@ -15,6 +15,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -24,6 +27,80 @@
 #include "common.h"
 #include "mpp.h"
 
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+	{
+		.name		= "wrt350nv2:green:power",
+		.gpio		= 0,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:security",
+		.gpio		= 1,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:orange:power",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:usb",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:wireless",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+	.leds		= wrt350n_v2_led_pins,
+	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wrt350n_v2_led_data,
+	},
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 3,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_WLAN,
+		.gpio		= 2,
+		.desc		= "WPS Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+	.buttons	= wrt350n_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &wrt350n_v2_button_data,
+	},
+};
+
+/*
+ * General setup
+ */
 static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
 	{  0, MPP_GPIO },		/* Power LED green (0=on) */
 	{  1, MPP_GPIO },		/* Security LED (0=on) */
@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
 				   WRT350N_V2_NOR_BOOT_SIZE);
 	platform_device_register(&wrt350n_v2_nor_flash);
+	platform_device_register(&wrt350n_v2_leds);
+	platform_device_register(&wrt350n_v2_button_device);
 }
 
 static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)

arch/arm/mach-pxa/Kconfig

@@ -37,6 +37,8 @@ config MACH_ZYLONITE320
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
 	select PXA3xx
+	select CPU_PXA300
+	select CPU_PXA310
 	select PXA_SSP
 
 config MACH_TAVOREVB

arch/arm/mach-pxa/corgi.c

@@ -457,6 +457,7 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	.gpio_vbus		= -1,
 	/* no connect GPIO; corgi can't tell connection status */
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };

arch/arm/mach-pxa/include/mach/hardware.h

@@ -250,20 +250,17 @@
 
 #define cpu_is_pxa930()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa930(id);			\
+		__cpu_is_pxa930(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa935()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa935(id);			\
+		__cpu_is_pxa935(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa950()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa950(id);			\
+		__cpu_is_pxa950(read_cpuid_id());	\
 	 })