ath9k: disable radio when all devices are marked idle

This uses the new configuration changes indicated up by
mac80211 when all interfaces are marked idle. We need to do
a little more work as we have our own set of virtual
wiphys within ath9k.

Only when all virtual wiphys are inactive do we allow an idle
state change for a wiphy to trigger disabling the radio.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ath9k.h

@@ -691,6 +691,7 @@ void ath9k_wiphy_pause_all_forced(struct ath_softc *sc,
 				  struct ath_wiphy *selected);
 bool ath9k_wiphy_scanning(struct ath_softc *sc);
 void ath9k_wiphy_work(struct work_struct *work);
+bool ath9k_all_wiphys_idle(struct ath_softc *sc);
 
 void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val);
 unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset);

drivers/net/wireless/ath/ath9k/main.c

@@ -2260,9 +2260,28 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	struct ath_softc *sc = aphy->sc;
 	struct ieee80211_conf *conf = &hw->conf;
 	struct ath_hw *ah = sc->sc_ah;
+	bool all_wiphys_idle = false, disable_radio = false;
 
 	mutex_lock(&sc->mutex);
 
+	/* Leave this as the first check */
+	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+
+		spin_lock_bh(&sc->wiphy_lock);
+		all_wiphys_idle =  ath9k_all_wiphys_idle(sc);
+		spin_unlock_bh(&sc->wiphy_lock);
+
+		if (conf->flags & IEEE80211_CONF_IDLE){
+			if (all_wiphys_idle)
+				disable_radio = true;
+		}
+		else if (all_wiphys_idle) {
+			ath_radio_enable(sc);
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"not-idle: enabling radio\n");
+		}
+	}
+
 	if (changed & IEEE80211_CONF_CHANGE_PS) {
 		if (conf->flags & IEEE80211_CONF_PS) {
 			if (!(ah->caps.hw_caps &
@@ -2330,6 +2349,11 @@ skip_chan_change:
 	if (changed & IEEE80211_CONF_CHANGE_POWER)
 		sc->config.txpowlimit = 2 * conf->power_level;
 
+	if (disable_radio) {
+		DPRINTF(sc, ATH_DBG_CONFIG, "idle: disabling radio\n");
+		ath_radio_disable(sc);
+	}
+
 	mutex_unlock(&sc->mutex);
 
 	return 0;

drivers/net/wireless/ath/ath9k/virtual.c

@@ -660,3 +660,20 @@ void ath9k_wiphy_set_scheduler(struct ath_softc *sc, unsigned int msec_int)
 		queue_delayed_work(sc->hw->workqueue, &sc->wiphy_work,
 				   sc->wiphy_scheduler_int);
 }
+
+/* caller must hold wiphy_lock */
+bool ath9k_all_wiphys_idle(struct ath_softc *sc)
+{
+	unsigned int i;
+	if (sc->pri_wiphy->state != ATH_WIPHY_INACTIVE) {
+		return false;
+	}
+	for (i = 0; i < sc->num_sec_wiphy; i++) {
+		struct ath_wiphy *aphy = sc->sec_wiphy[i];
+		if (!aphy)
+			continue;
+		if (aphy->state != ATH_WIPHY_INACTIVE)
+			return false;
+	}
+	return true;
+}