Просмотр исходного кода

libertas/assoc.c: rearrange some strange line breaks

Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville 15 лет назад
Родитель
Сommit
64147c7297
1 измененных файлов с 30 добавлено и 32 удалено
  1. 30 32
      drivers/net/wireless/libertas/assoc.c

+ 30 - 32
drivers/net/wireless/libertas/assoc.c

@@ -1160,11 +1160,11 @@ int lbs_adhoc_stop(struct lbs_private *priv)
 static inline int match_bss_no_security(struct lbs_802_11_security *secinfo,
 					struct bss_descriptor *match_bss)
 {
-	if (!secinfo->wep_enabled  && !secinfo->WPAenabled
-	    && !secinfo->WPA2enabled
-	    && match_bss->wpa_ie[0] != WLAN_EID_GENERIC
-	    && match_bss->rsn_ie[0] != WLAN_EID_RSN
-	    && !(match_bss->capability & WLAN_CAPABILITY_PRIVACY))
+	if (!secinfo->wep_enabled &&
+	    !secinfo->WPAenabled && !secinfo->WPA2enabled &&
+	    match_bss->wpa_ie[0] != WLAN_EID_GENERIC &&
+	    match_bss->rsn_ie[0] != WLAN_EID_RSN &&
+	    !(match_bss->capability & WLAN_CAPABILITY_PRIVACY))
 		return 1;
 	else
 		return 0;
@@ -1173,9 +1173,9 @@ static inline int match_bss_no_security(struct lbs_802_11_security *secinfo,
 static inline int match_bss_static_wep(struct lbs_802_11_security *secinfo,
 				       struct bss_descriptor *match_bss)
 {
-	if (secinfo->wep_enabled && !secinfo->WPAenabled
-	    && !secinfo->WPA2enabled
-	    && (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
+	if (secinfo->wep_enabled &&
+	    !secinfo->WPAenabled && !secinfo->WPA2enabled &&
+	    (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
 		return 1;
 	else
 		return 0;
@@ -1184,8 +1184,8 @@ static inline int match_bss_static_wep(struct lbs_802_11_security *secinfo,
 static inline int match_bss_wpa(struct lbs_802_11_security *secinfo,
 				struct bss_descriptor *match_bss)
 {
-	if (!secinfo->wep_enabled && secinfo->WPAenabled
-	    && (match_bss->wpa_ie[0] == WLAN_EID_GENERIC)
+	if (!secinfo->wep_enabled && secinfo->WPAenabled &&
+	    (match_bss->wpa_ie[0] == WLAN_EID_GENERIC)
 	    /* privacy bit may NOT be set in some APs like LinkSys WRT54G
 	    && (match_bss->capability & WLAN_CAPABILITY_PRIVACY) */
 	   )
@@ -1210,11 +1210,11 @@ static inline int match_bss_wpa2(struct lbs_802_11_security *secinfo,
 static inline int match_bss_dynamic_wep(struct lbs_802_11_security *secinfo,
 					struct bss_descriptor *match_bss)
 {
-	if (!secinfo->wep_enabled && !secinfo->WPAenabled
-	    && !secinfo->WPA2enabled
-	    && (match_bss->wpa_ie[0] != WLAN_EID_GENERIC)
-	    && (match_bss->rsn_ie[0] != WLAN_EID_RSN)
-	    && (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
+	if (!secinfo->wep_enabled &&
+	    !secinfo->WPAenabled && !secinfo->WPA2enabled &&
+	    (match_bss->wpa_ie[0] != WLAN_EID_GENERIC) &&
+	    (match_bss->rsn_ie[0] != WLAN_EID_RSN) &&
+	    (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
 		return 1;
 	else
 		return 0;
@@ -1525,8 +1525,8 @@ static int assoc_helper_associate(struct lbs_private *priv,
 	/* If we're given and 'any' BSSID, try associating based on SSID */
 
 	if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) {
-		if (compare_ether_addr(bssid_any, assoc_req->bssid)
-		    && compare_ether_addr(bssid_off, assoc_req->bssid)) {
+		if (compare_ether_addr(bssid_any, assoc_req->bssid) &&
+		    compare_ether_addr(bssid_off, assoc_req->bssid)) {
 			ret = assoc_helper_bssid(priv, assoc_req);
 			done = 1;
 		}
@@ -1612,11 +1612,9 @@ static int assoc_helper_channel(struct lbs_private *priv,
 		goto restore_mesh;
 	}
 
-	if (   assoc_req->secinfo.wep_enabled
-	    &&   (assoc_req->wep_keys[0].len
-	       || assoc_req->wep_keys[1].len
-	       || assoc_req->wep_keys[2].len
-	       || assoc_req->wep_keys[3].len)) {
+	if (assoc_req->secinfo.wep_enabled &&
+	    (assoc_req->wep_keys[0].len || assoc_req->wep_keys[1].len ||
+	     assoc_req->wep_keys[2].len || assoc_req->wep_keys[3].len)) {
 		/* Make sure WEP keys are re-sent to firmware */
 		set_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags);
 	}
@@ -1983,14 +1981,14 @@ void lbs_association_worker(struct work_struct *work)
 		assoc_req->secinfo.auth_mode);
 
 	/* If 'any' SSID was specified, find an SSID to associate with */
-	if (test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)
-	    && !assoc_req->ssid_len)
+	if (test_bit(ASSOC_FLAG_SSID, &assoc_req->flags) &&
+	    !assoc_req->ssid_len)
 		find_any_ssid = 1;
 
 	/* But don't use 'any' SSID if there's a valid locked BSSID to use */
 	if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) {
-		if (compare_ether_addr(assoc_req->bssid, bssid_any)
-		    && compare_ether_addr(assoc_req->bssid, bssid_off))
+		if (compare_ether_addr(assoc_req->bssid, bssid_any) &&
+		    compare_ether_addr(assoc_req->bssid, bssid_off))
 			find_any_ssid = 0;
 	}
 
@@ -2064,15 +2062,15 @@ void lbs_association_worker(struct work_struct *work)
 			goto out;
 	}
 
-	if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags)
-	    || test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) {
+	if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags) ||
+	    test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) {
 		ret = assoc_helper_wpa_keys(priv, assoc_req);
 		if (ret)
 			goto out;
 	}
 
-	if (   test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags)
-	    || test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) {
+	if (test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags) ||
+	    test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) {
 		ret = assoc_helper_wep_keys(priv, assoc_req);
 		if (ret)
 			goto out;
@@ -2082,8 +2080,8 @@ void lbs_association_worker(struct work_struct *work)
 	/* SSID/BSSID should be the _last_ config option set, because they
 	 * trigger the association attempt.
 	 */
-	if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)
-	    || test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) {
+	if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags) ||
+	    test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) {
 		int success = 1;
 
 		ret = assoc_helper_associate(priv, assoc_req);