[PATCH] dvb: usb/pci: correct syntax of driver name fields

Change the name-field of the pci_driver and usb_driver structs to the name of
the module after compilation.  It seems that this field is used in some places
where special characters are not allowed.  Thanks to Alan Halverson for
finding this problem.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/media/dvb/b2c2/flexcop-pci.c

@@ -409,7 +409,7 @@ static struct pci_device_id flexcop_pci_tbl[] = {
 MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
 
 static struct pci_driver flexcop_pci_driver = {
-	.name     = "Technisat/B2C2 FlexCop II/IIb PCI",
+	.name     = "b2c2_flexcop_pci",
 	.id_table = flexcop_pci_tbl,
 	.probe    = flexcop_pci_probe,
 	.remove   = flexcop_pci_remove,

drivers/media/dvb/b2c2/flexcop-usb.c

@@ -545,7 +545,7 @@ static struct usb_device_id flexcop_usb_table [] = {
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver flexcop_usb_driver = {
 	.owner		= THIS_MODULE,
-	.name		= "Technisat/B2C2 FlexCop II/IIb/III USB",
+	.name		= "b2c2_flexcop_usb",
 	.probe		= flexcop_usb_probe,
 	.disconnect = flexcop_usb_disconnect,
 	.id_table	= flexcop_usb_table,

drivers/media/dvb/dvb-usb/a800.c

@@ -149,7 +149,7 @@ static struct dvb_usb_properties a800_properties = {
 
 static struct usb_driver a800_driver = {
 	.owner		= THIS_MODULE,
-	.name		= "AVerMedia AverTV DVB-T USB 2.0 (A800)",
+	.name		= "dvb_usb_a800",
 	.probe		= a800_probe,
 	.disconnect = dvb_usb_device_exit,
 	.id_table	= a800_table,

drivers/media/dvb/dvb-usb/cxusb.c

@@ -262,7 +262,7 @@ static struct dvb_usb_properties cxusb_properties = {
 
 static struct usb_driver cxusb_driver = {
 	.owner		= THIS_MODULE,
-	.name		= "cxusb",
+	.name		= "dvb_usb_cxusb",
 	.probe		= cxusb_probe,
 	.disconnect = dvb_usb_device_exit,
 	.id_table	= cxusb_table,

drivers/media/dvb/dvb-usb/dibusb-mb.c

@@ -317,7 +317,7 @@ static struct dvb_usb_properties dibusb2_0b_properties = {
 
 static struct usb_driver dibusb_driver = {
 	.owner		= THIS_MODULE,
-	.name		= "DiBcom based USB DVB-T devices (DiB3000M-B based)",
+	.name		= "dvb_usb_dibusb_mb",
 	.probe		= dibusb_probe,
 	.disconnect = dvb_usb_device_exit,
 	.id_table	= dibusb_dib3000mb_table,

drivers/media/dvb/dvb-usb/dibusb-mc.c

@@ -83,7 +83,7 @@ static struct dvb_usb_properties dibusb_mc_properties = {
 
 static struct usb_driver dibusb_mc_driver = {
 	.owner		= THIS_MODULE,
-	.name		= "DiBcom based USB2.0 DVB-T (DiB3000M-C/P based) devices",
+	.name		= "dvb_usb_dibusb_mc",
 	.probe		= dibusb_mc_probe,
 	.disconnect = dvb_usb_device_exit,
 	.id_table	= dibusb_dib3000mc_table,

drivers/media/dvb/dvb-usb/digitv.c

@@ -228,7 +228,7 @@ static struct dvb_usb_properties digitv_properties = {
 
 static struct usb_driver digitv_driver = {
 	.owner		= THIS_MODULE,
-	.name		= "Nebula Electronics uDigiTV DVB-T USB2.0 device",
+	.name		= "dvb_usb_digitv",
 	.probe		= digitv_probe,
 	.disconnect = dvb_usb_device_exit,
 	.id_table	= digitv_table,

drivers/media/dvb/dvb-usb/nova-t-usb2.c

@@ -203,7 +203,7 @@ static struct dvb_usb_properties nova_t_properties = {
 
 static struct usb_driver nova_t_driver = {
 	.owner		= THIS_MODULE,
-	.name		= "Hauppauge WinTV-NOVA-T usb2",
+	.name		= "dvb_usb_nova_t_usb2",
 	.probe		= nova_t_probe,
 	.disconnect = dvb_usb_device_exit,
 	.id_table	= nova_t_table,

drivers/media/dvb/dvb-usb/umt-010.c

@@ -129,7 +129,7 @@ static struct dvb_usb_properties umt_properties = {
 
 static struct usb_driver umt_driver = {
 	.owner		= THIS_MODULE,
-	.name		= "HanfTek UMT-010 USB2.0 DVB-T devices",
+	.name		= "dvb_usb_umt_010",
 	.probe		= umt_probe,
 	.disconnect = dvb_usb_device_exit,
 	.id_table	= umt_table,

drivers/media/dvb/dvb-usb/vp7045.c

@@ -44,7 +44,7 @@ int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in,
 	if (usb_control_msg(d->udev,
 			usb_sndctrlpipe(d->udev,0),
 			TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0,
-			outbuf, 20, 2*HZ) != 20) {
+			outbuf, 20, 2000) != 20) {
 		err("USB control message 'out' went wrong.");
 		ret = -EIO;
 		goto unlock;
@@ -55,7 +55,7 @@ int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in,
 	if (usb_control_msg(d->udev,
 			usb_rcvctrlpipe(d->udev,0),
 			TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
-			inbuf, 12, 2*HZ) != 12) {
+			inbuf, 12, 2000) != 12) {
 		err("USB control message 'in' went wrong.");
 		ret = -EIO;
 		goto unlock;
@@ -255,7 +255,7 @@ static struct dvb_usb_properties vp7045_properties = {
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver vp7045_usb_driver = {
 	.owner		= THIS_MODULE,
-	.name		= "dvb-usb-vp7045",
+	.name		= "dvb_usb_vp7045",
 	.probe 		= vp7045_usb_probe,
 	.disconnect = dvb_usb_device_exit,
 	.id_table 	= vp7045_usb_table,