drm/vmwgfx: Add svga headers for vmwgfx driver

These headers are shared between multiple place where
different coding standards apply. They will be fixed
up at a later time.

Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/vmwgfx/svga3d_reg.h

@@ -0,0 +1,1793 @@
+/**********************************************************
+ * Copyright 1998-2009 VMware, Inc.  All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ **********************************************************/
+
+/*
+ * svga3d_reg.h --
+ *
+ *       SVGA 3D hardware definitions
+ */
+
+#ifndef _SVGA3D_REG_H_
+#define _SVGA3D_REG_H_
+
+#include "svga_reg.h"
+
+
+/*
+ * 3D Hardware Version
+ *
+ *   The hardware version is stored in the SVGA_FIFO_3D_HWVERSION fifo
+ *   register.   Is set by the host and read by the guest.  This lets
+ *   us make new guest drivers which are backwards-compatible with old
+ *   SVGA hardware revisions.  It does not let us support old guest
+ *   drivers.  Good enough for now.
+ *
+ */
+
+#define SVGA3D_MAKE_HWVERSION(major, minor)      (((major) << 16) | ((minor) & 0xFF))
+#define SVGA3D_MAJOR_HWVERSION(version)          ((version) >> 16)
+#define SVGA3D_MINOR_HWVERSION(version)          ((version) & 0xFF)
+
+typedef enum {
+   SVGA3D_HWVERSION_WS5_RC1   = SVGA3D_MAKE_HWVERSION(0, 1),
+   SVGA3D_HWVERSION_WS5_RC2   = SVGA3D_MAKE_HWVERSION(0, 2),
+   SVGA3D_HWVERSION_WS51_RC1  = SVGA3D_MAKE_HWVERSION(0, 3),
+   SVGA3D_HWVERSION_WS6_B1    = SVGA3D_MAKE_HWVERSION(1, 1),
+   SVGA3D_HWVERSION_FUSION_11 = SVGA3D_MAKE_HWVERSION(1, 4),
+   SVGA3D_HWVERSION_WS65_B1   = SVGA3D_MAKE_HWVERSION(2, 0),
+   SVGA3D_HWVERSION_CURRENT   = SVGA3D_HWVERSION_WS65_B1,
+} SVGA3dHardwareVersion;
+
+/*
+ * Generic Types
+ */
+
+typedef uint32 SVGA3dBool; /* 32-bit Bool definition */
+#define SVGA3D_NUM_CLIPPLANES                   6
+#define SVGA3D_MAX_SIMULTANEOUS_RENDER_TARGETS  8
+
+
+/*
+ * Surface formats.
+ *
+ * If you modify this list, be sure to keep GLUtil.c in sync. It
+ * includes the internal format definition of each surface in
+ * GLUtil_ConvertSurfaceFormat, and it contains a table of
+ * human-readable names in GLUtil_GetFormatName.
+ */
+
+typedef enum SVGA3dSurfaceFormat {
+   SVGA3D_FORMAT_INVALID = 0,
+
+   SVGA3D_X8R8G8B8       = 1,
+   SVGA3D_A8R8G8B8       = 2,
+
+   SVGA3D_R5G6B5         = 3,
+   SVGA3D_X1R5G5B5       = 4,
+   SVGA3D_A1R5G5B5       = 5,
+   SVGA3D_A4R4G4B4       = 6,
+
+   SVGA3D_Z_D32          = 7,
+   SVGA3D_Z_D16          = 8,
+   SVGA3D_Z_D24S8        = 9,
+   SVGA3D_Z_D15S1        = 10,
+
+   SVGA3D_LUMINANCE8            = 11,
+   SVGA3D_LUMINANCE4_ALPHA4     = 12,
+   SVGA3D_LUMINANCE16           = 13,
+   SVGA3D_LUMINANCE8_ALPHA8     = 14,
+
+   SVGA3D_DXT1           = 15,
+   SVGA3D_DXT2           = 16,
+   SVGA3D_DXT3           = 17,
+   SVGA3D_DXT4           = 18,
+   SVGA3D_DXT5           = 19,
+
+   SVGA3D_BUMPU8V8       = 20,
+   SVGA3D_BUMPL6V5U5     = 21,
+   SVGA3D_BUMPX8L8V8U8   = 22,
+   SVGA3D_BUMPL8V8U8     = 23,
+
+   SVGA3D_ARGB_S10E5     = 24,   /* 16-bit floating-point ARGB */
+   SVGA3D_ARGB_S23E8     = 25,   /* 32-bit floating-point ARGB */
+
+   SVGA3D_A2R10G10B10    = 26,
+
+   /* signed formats */
+   SVGA3D_V8U8           = 27,
+   SVGA3D_Q8W8V8U8       = 28,
+   SVGA3D_CxV8U8         = 29,
+
+   /* mixed formats */
+   SVGA3D_X8L8V8U8       = 30,
+   SVGA3D_A2W10V10U10    = 31,
+
+   SVGA3D_ALPHA8         = 32,
+
+   /* Single- and dual-component floating point formats */
+   SVGA3D_R_S10E5        = 33,
+   SVGA3D_R_S23E8        = 34,
+   SVGA3D_RG_S10E5       = 35,
+   SVGA3D_RG_S23E8       = 36,
+
+   /*
+    * Any surface can be used as a buffer object, but SVGA3D_BUFFER is
+    * the most efficient format to use when creating new surfaces
+    * expressly for index or vertex data.
+    */
+   SVGA3D_BUFFER         = 37,
+
+   SVGA3D_Z_D24X8        = 38,
+
+   SVGA3D_V16U16         = 39,
+
+   SVGA3D_G16R16         = 40,
+   SVGA3D_A16B16G16R16   = 41,
+
+   /* Packed Video formats */
+   SVGA3D_UYVY           = 42,
+   SVGA3D_YUY2           = 43,
+
+   SVGA3D_FORMAT_MAX
+} SVGA3dSurfaceFormat;
+
+typedef uint32 SVGA3dColor; /* a, r, g, b */
+
+/*
+ * These match the D3DFORMAT_OP definitions used by Direct3D. We need
+ * them so that we can query the host for what the supported surface
+ * operations are (when we're using the D3D backend, in particular),
+ * and so we can send those operations to the guest.
+ */
+typedef enum {
+   SVGA3DFORMAT_OP_TEXTURE                               = 0x00000001,
+   SVGA3DFORMAT_OP_VOLUMETEXTURE                         = 0x00000002,
+   SVGA3DFORMAT_OP_CUBETEXTURE                           = 0x00000004,
+   SVGA3DFORMAT_OP_OFFSCREEN_RENDERTARGET                = 0x00000008,
+   SVGA3DFORMAT_OP_SAME_FORMAT_RENDERTARGET              = 0x00000010,
+   SVGA3DFORMAT_OP_ZSTENCIL                              = 0x00000040,
+   SVGA3DFORMAT_OP_ZSTENCIL_WITH_ARBITRARY_COLOR_DEPTH   = 0x00000080,
+
+/*
+ * This format can be used as a render target if the current display mode
+ * is the same depth if the alpha channel is ignored. e.g. if the device
+ * can render to A8R8G8B8 when the display mode is X8R8G8B8, then the
+ * format op list entry for A8R8G8B8 should have this cap.
+ */
+   SVGA3DFORMAT_OP_SAME_FORMAT_UP_TO_ALPHA_RENDERTARGET  = 0x00000100,
+
+/*
+ * This format contains DirectDraw support (including Flip).  This flag
+ * should not to be set on alpha formats.
+ */
+   SVGA3DFORMAT_OP_DISPLAYMODE                           = 0x00000400,
+
+/*
+ * The rasterizer can support some level of Direct3D support in this format
+ * and implies that the driver can create a Context in this mode (for some
+ * render target format).  When this flag is set, the SVGA3DFORMAT_OP_DISPLAYMODE
+ * flag must also be set.
+ */
+   SVGA3DFORMAT_OP_3DACCELERATION                        = 0x00000800,
+
+/*
+ * This is set for a private format when the driver has put the bpp in
+ * the structure.
+ */
+   SVGA3DFORMAT_OP_PIXELSIZE                             = 0x00001000,
+
+/*
+ * Indicates that this format can be converted to any RGB format for which
+ * SVGA3DFORMAT_OP_MEMBEROFGROUP_ARGB is specified
+ */
+   SVGA3DFORMAT_OP_CONVERT_TO_ARGB                       = 0x00002000,
+
+/*
+ * Indicates that this format can be used to create offscreen plain surfaces.
+ */
+   SVGA3DFORMAT_OP_OFFSCREENPLAIN                        = 0x00004000,
+
+/*
+ * Indicated that this format can be read as an SRGB texture (meaning that the
+ * sampler will linearize the looked up data)
+ */
+   SVGA3DFORMAT_OP_SRGBREAD                              = 0x00008000,
+
+/*
+ * Indicates that this format can be used in the bumpmap instructions
+ */
+   SVGA3DFORMAT_OP_BUMPMAP                               = 0x00010000,
+
+/*
+ * Indicates that this format can be sampled by the displacement map sampler
+ */
+   SVGA3DFORMAT_OP_DMAP                                  = 0x00020000,
+
+/*
+ * Indicates that this format cannot be used with texture filtering
+ */
+   SVGA3DFORMAT_OP_NOFILTER                              = 0x00040000,
+
+/*
+ * Indicates that format conversions are supported to this RGB format if
+ * SVGA3DFORMAT_OP_CONVERT_TO_ARGB is specified in the source format.
+ */
+   SVGA3DFORMAT_OP_MEMBEROFGROUP_ARGB                    = 0x00080000,
+
+/*
+ * Indicated that this format can be written as an SRGB target (meaning that the
+ * pixel pipe will DE-linearize data on output to format)
+ */
+   SVGA3DFORMAT_OP_SRGBWRITE                             = 0x00100000,
+
+/*
+ * Indicates that this format cannot be used with alpha blending
+ */
+   SVGA3DFORMAT_OP_NOALPHABLEND                          = 0x00200000,
+
+/*
+ * Indicates that the device can auto-generated sublevels for resources
+ * of this format
+ */
+   SVGA3DFORMAT_OP_AUTOGENMIPMAP                         = 0x00400000,
+
+/*
+ * Indicates that this format can be used by vertex texture sampler
+ */
+   SVGA3DFORMAT_OP_VERTEXTEXTURE                         = 0x00800000,
+
+/*
+ * Indicates that this format supports neither texture coordinate wrap
+ * modes, nor mipmapping
+ */
+   SVGA3DFORMAT_OP_NOTEXCOORDWRAPNORMIP                  = 0x01000000
+} SVGA3dFormatOp;
+
+/*
+ * This structure is a conversion of SVGA3DFORMAT_OP_*.
+ * Entries must be located at the same position.
+ */
+typedef union {
+   uint32 value;
+   struct {
+      uint32 texture : 1;
+      uint32 volumeTexture : 1;
+      uint32 cubeTexture : 1;
+      uint32 offscreenRenderTarget : 1;
+      uint32 sameFormatRenderTarget : 1;
+      uint32 unknown1 : 1;
+      uint32 zStencil : 1;
+      uint32 zStencilArbitraryDepth : 1;
+      uint32 sameFormatUpToAlpha : 1;
+      uint32 unknown2 : 1;
+      uint32 displayMode : 1;
+      uint32 acceleration3d : 1;
+      uint32 pixelSize : 1;
+      uint32 convertToARGB : 1;
+      uint32 offscreenPlain : 1;
+      uint32 sRGBRead : 1;
+      uint32 bumpMap : 1;
+      uint32 dmap : 1;
+      uint32 noFilter : 1;
+      uint32 memberOfGroupARGB : 1;
+      uint32 sRGBWrite : 1;
+      uint32 noAlphaBlend : 1;
+      uint32 autoGenMipMap : 1;
+      uint32 vertexTexture : 1;
+      uint32 noTexCoordWrapNorMip : 1;
+   };
+} SVGA3dSurfaceFormatCaps;
+
+/*
+ * SVGA_3D_CMD_SETRENDERSTATE Types.  All value types
+ * must fit in a uint32.
+ */
+
+typedef enum {
+   SVGA3D_RS_INVALID                   = 0,
+   SVGA3D_RS_ZENABLE                   = 1,     /* SVGA3dBool */
+   SVGA3D_RS_ZWRITEENABLE              = 2,     /* SVGA3dBool */
+   SVGA3D_RS_ALPHATESTENABLE           = 3,     /* SVGA3dBool */
+   SVGA3D_RS_DITHERENABLE              = 4,     /* SVGA3dBool */
+   SVGA3D_RS_BLENDENABLE               = 5,     /* SVGA3dBool */
+   SVGA3D_RS_FOGENABLE                 = 6,     /* SVGA3dBool */
+   SVGA3D_RS_SPECULARENABLE            = 7,     /* SVGA3dBool */
+   SVGA3D_RS_STENCILENABLE             = 8,     /* SVGA3dBool */
+   SVGA3D_RS_LIGHTINGENABLE            = 9,     /* SVGA3dBool */
+   SVGA3D_RS_NORMALIZENORMALS          = 10,    /* SVGA3dBool */
+   SVGA3D_RS_POINTSPRITEENABLE         = 11,    /* SVGA3dBool */
+   SVGA3D_RS_POINTSCALEENABLE          = 12,    /* SVGA3dBool */
+   SVGA3D_RS_STENCILREF                = 13,    /* uint32 */
+   SVGA3D_RS_STENCILMASK               = 14,    /* uint32 */
+   SVGA3D_RS_STENCILWRITEMASK          = 15,    /* uint32 */
+   SVGA3D_RS_FOGSTART                  = 16,    /* float */
+   SVGA3D_RS_FOGEND                    = 17,    /* float */
+   SVGA3D_RS_FOGDENSITY                = 18,    /* float */
+   SVGA3D_RS_POINTSIZE                 = 19,    /* float */
+   SVGA3D_RS_POINTSIZEMIN              = 20,    /* float */
+   SVGA3D_RS_POINTSIZEMAX              = 21,    /* float */
+   SVGA3D_RS_POINTSCALE_A              = 22,    /* float */
+   SVGA3D_RS_POINTSCALE_B              = 23,    /* float */
+   SVGA3D_RS_POINTSCALE_C              = 24,    /* float */
+   SVGA3D_RS_FOGCOLOR                  = 25,    /* SVGA3dColor */
+   SVGA3D_RS_AMBIENT                   = 26,    /* SVGA3dColor */
+   SVGA3D_RS_CLIPPLANEENABLE           = 27,    /* SVGA3dClipPlanes */
+   SVGA3D_RS_FOGMODE                   = 28,    /* SVGA3dFogMode */
+   SVGA3D_RS_FILLMODE                  = 29,    /* SVGA3dFillMode */
+   SVGA3D_RS_SHADEMODE                 = 30,    /* SVGA3dShadeMode */
+   SVGA3D_RS_LINEPATTERN               = 31,    /* SVGA3dLinePattern */
+   SVGA3D_RS_SRCBLEND                  = 32,    /* SVGA3dBlendOp */
+   SVGA3D_RS_DSTBLEND                  = 33,    /* SVGA3dBlendOp */
+   SVGA3D_RS_BLENDEQUATION             = 34,    /* SVGA3dBlendEquation */
+   SVGA3D_RS_CULLMODE                  = 35,    /* SVGA3dFace */
+   SVGA3D_RS_ZFUNC                     = 36,    /* SVGA3dCmpFunc */
+   SVGA3D_RS_ALPHAFUNC                 = 37,    /* SVGA3dCmpFunc */
+   SVGA3D_RS_STENCILFUNC               = 38,    /* SVGA3dCmpFunc */
+   SVGA3D_RS_STENCILFAIL               = 39,    /* SVGA3dStencilOp */
+   SVGA3D_RS_STENCILZFAIL              = 40,    /* SVGA3dStencilOp */
+   SVGA3D_RS_STENCILPASS               = 41,    /* SVGA3dStencilOp */
+   SVGA3D_RS_ALPHAREF                  = 42,    /* float (0.0 .. 1.0) */
+   SVGA3D_RS_FRONTWINDING              = 43,    /* SVGA3dFrontWinding */
+   SVGA3D_RS_COORDINATETYPE            = 44,    /* SVGA3dCoordinateType */
+   SVGA3D_RS_ZBIAS                     = 45,    /* float */
+   SVGA3D_RS_RANGEFOGENABLE            = 46,    /* SVGA3dBool */
+   SVGA3D_RS_COLORWRITEENABLE          = 47,    /* SVGA3dColorMask */
+   SVGA3D_RS_VERTEXMATERIALENABLE      = 48,    /* SVGA3dBool */
+   SVGA3D_RS_DIFFUSEMATERIALSOURCE     = 49,    /* SVGA3dVertexMaterial */
+   SVGA3D_RS_SPECULARMATERIALSOURCE    = 50,    /* SVGA3dVertexMaterial */
+   SVGA3D_RS_AMBIENTMATERIALSOURCE     = 51,    /* SVGA3dVertexMaterial */
+   SVGA3D_RS_EMISSIVEMATERIALSOURCE    = 52,    /* SVGA3dVertexMaterial */
+   SVGA3D_RS_TEXTUREFACTOR             = 53,    /* SVGA3dColor */
+   SVGA3D_RS_LOCALVIEWER               = 54,    /* SVGA3dBool */
+   SVGA3D_RS_SCISSORTESTENABLE         = 55,    /* SVGA3dBool */
+   SVGA3D_RS_BLENDCOLOR                = 56,    /* SVGA3dColor */
+   SVGA3D_RS_STENCILENABLE2SIDED       = 57,    /* SVGA3dBool */
+   SVGA3D_RS_CCWSTENCILFUNC            = 58,    /* SVGA3dCmpFunc */
+   SVGA3D_RS_CCWSTENCILFAIL            = 59,    /* SVGA3dStencilOp */
+   SVGA3D_RS_CCWSTENCILZFAIL           = 60,    /* SVGA3dStencilOp */
+   SVGA3D_RS_CCWSTENCILPASS            = 61,    /* SVGA3dStencilOp */
+   SVGA3D_RS_VERTEXBLEND               = 62,    /* SVGA3dVertexBlendFlags */
+   SVGA3D_RS_SLOPESCALEDEPTHBIAS       = 63,    /* float */
+   SVGA3D_RS_DEPTHBIAS                 = 64,    /* float */
+
+
+   /*
+    * Output Gamma Level
+    *
+    * Output gamma effects the gamma curve of colors that are output from the
+    * rendering pipeline.  A value of 1.0 specifies a linear color space. If the
+    * value is <= 0.0, gamma correction is ignored and linear color space is
+    * used.
+    */
+
+   SVGA3D_RS_OUTPUTGAMMA               = 65,    /* float */
+   SVGA3D_RS_ZVISIBLE                  = 66,    /* SVGA3dBool */
+   SVGA3D_RS_LASTPIXEL                 = 67,    /* SVGA3dBool */
+   SVGA3D_RS_CLIPPING                  = 68,    /* SVGA3dBool */
+   SVGA3D_RS_WRAP0                     = 69,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP1                     = 70,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP2                     = 71,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP3                     = 72,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP4                     = 73,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP5                     = 74,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP6                     = 75,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP7                     = 76,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP8                     = 77,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP9                     = 78,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP10                    = 79,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP11                    = 80,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP12                    = 81,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP13                    = 82,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP14                    = 83,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_WRAP15                    = 84,    /* SVGA3dWrapFlags */
+   SVGA3D_RS_MULTISAMPLEANTIALIAS      = 85,    /* SVGA3dBool */
+   SVGA3D_RS_MULTISAMPLEMASK           = 86,    /* uint32 */
+   SVGA3D_RS_INDEXEDVERTEXBLENDENABLE  = 87,    /* SVGA3dBool */
+   SVGA3D_RS_TWEENFACTOR               = 88,    /* float */
+   SVGA3D_RS_ANTIALIASEDLINEENABLE     = 89,    /* SVGA3dBool */
+   SVGA3D_RS_COLORWRITEENABLE1         = 90,    /* SVGA3dColorMask */
+   SVGA3D_RS_COLORWRITEENABLE2         = 91,    /* SVGA3dColorMask */
+   SVGA3D_RS_COLORWRITEENABLE3         = 92,    /* SVGA3dColorMask */
+   SVGA3D_RS_SEPARATEALPHABLENDENABLE  = 93,    /* SVGA3dBool */
+   SVGA3D_RS_SRCBLENDALPHA             = 94,    /* SVGA3dBlendOp */
+   SVGA3D_RS_DSTBLENDALPHA             = 95,    /* SVGA3dBlendOp */
+   SVGA3D_RS_BLENDEQUATIONALPHA        = 96,    /* SVGA3dBlendEquation */
+   SVGA3D_RS_MAX
+} SVGA3dRenderStateName;
+
+typedef enum {
+   SVGA3D_VERTEXMATERIAL_NONE     = 0,    /* Use the value in the current material */
+   SVGA3D_VERTEXMATERIAL_DIFFUSE  = 1,    /* Use the value in the diffuse component */
+   SVGA3D_VERTEXMATERIAL_SPECULAR = 2,    /* Use the value in the specular component */
+} SVGA3dVertexMaterial;
+
+typedef enum {
+   SVGA3D_FILLMODE_INVALID = 0,
+   SVGA3D_FILLMODE_POINT   = 1,
+   SVGA3D_FILLMODE_LINE    = 2,
+   SVGA3D_FILLMODE_FILL    = 3,
+   SVGA3D_FILLMODE_MAX
+} SVGA3dFillModeType;
+
+
+typedef
+union {
+   struct {
+      uint16   mode;       /* SVGA3dFillModeType */
+      uint16   face;       /* SVGA3dFace */
+   };
+   uint32 uintValue;
+} SVGA3dFillMode;
+
+typedef enum {
+   SVGA3D_SHADEMODE_INVALID = 0,
+   SVGA3D_SHADEMODE_FLAT    = 1,
+   SVGA3D_SHADEMODE_SMOOTH  = 2,
+   SVGA3D_SHADEMODE_PHONG   = 3,     /* Not supported */
+   SVGA3D_SHADEMODE_MAX
+} SVGA3dShadeMode;
+
+typedef
+union {
+   struct {
+      uint16 repeat;
+      uint16 pattern;
+   };
+   uint32 uintValue;
+} SVGA3dLinePattern;
+
+typedef enum {
+   SVGA3D_BLENDOP_INVALID            = 0,
+   SVGA3D_BLENDOP_ZERO               = 1,
+   SVGA3D_BLENDOP_ONE                = 2,
+   SVGA3D_BLENDOP_SRCCOLOR           = 3,
+   SVGA3D_BLENDOP_INVSRCCOLOR        = 4,
+   SVGA3D_BLENDOP_SRCALPHA           = 5,
+   SVGA3D_BLENDOP_INVSRCALPHA        = 6,
+   SVGA3D_BLENDOP_DESTALPHA          = 7,
+   SVGA3D_BLENDOP_INVDESTALPHA       = 8,
+   SVGA3D_BLENDOP_DESTCOLOR          = 9,
+   SVGA3D_BLENDOP_INVDESTCOLOR       = 10,
+   SVGA3D_BLENDOP_SRCALPHASAT        = 11,
+   SVGA3D_BLENDOP_BLENDFACTOR        = 12,
+   SVGA3D_BLENDOP_INVBLENDFACTOR     = 13,
+   SVGA3D_BLENDOP_MAX
+} SVGA3dBlendOp;
+
+typedef enum {
+   SVGA3D_BLENDEQ_INVALID            = 0,
+   SVGA3D_BLENDEQ_ADD                = 1,
+   SVGA3D_BLENDEQ_SUBTRACT           = 2,
+   SVGA3D_BLENDEQ_REVSUBTRACT        = 3,
+   SVGA3D_BLENDEQ_MINIMUM            = 4,
+   SVGA3D_BLENDEQ_MAXIMUM            = 5,
+   SVGA3D_BLENDEQ_MAX
+} SVGA3dBlendEquation;
+
+typedef enum {
+   SVGA3D_FRONTWINDING_INVALID = 0,
+   SVGA3D_FRONTWINDING_CW      = 1,
+   SVGA3D_FRONTWINDING_CCW     = 2,
+   SVGA3D_FRONTWINDING_MAX
+} SVGA3dFrontWinding;
+
+typedef enum {
+   SVGA3D_FACE_INVALID  = 0,
+   SVGA3D_FACE_NONE     = 1,
+   SVGA3D_FACE_FRONT    = 2,
+   SVGA3D_FACE_BACK     = 3,
+   SVGA3D_FACE_FRONT_BACK = 4,
+   SVGA3D_FACE_MAX
+} SVGA3dFace;
+
+/*
+ * The order and the values should not be changed
+ */
+
+typedef enum {
+   SVGA3D_CMP_INVALID              = 0,
+   SVGA3D_CMP_NEVER                = 1,
+   SVGA3D_CMP_LESS                 = 2,
+   SVGA3D_CMP_EQUAL                = 3,
+   SVGA3D_CMP_LESSEQUAL            = 4,
+   SVGA3D_CMP_GREATER              = 5,
+   SVGA3D_CMP_NOTEQUAL             = 6,
+   SVGA3D_CMP_GREATEREQUAL         = 7,
+   SVGA3D_CMP_ALWAYS               = 8,
+   SVGA3D_CMP_MAX
+} SVGA3dCmpFunc;
+
+/*
+ * SVGA3D_FOGFUNC_* specifies the fog equation, or PER_VERTEX which allows
+ * the fog factor to be specified in the alpha component of the specular
+ * (a.k.a. secondary) vertex color.
+ */
+typedef enum {
+   SVGA3D_FOGFUNC_INVALID          = 0,
+   SVGA3D_FOGFUNC_EXP              = 1,
+   SVGA3D_FOGFUNC_EXP2             = 2,
+   SVGA3D_FOGFUNC_LINEAR           = 3,
+   SVGA3D_FOGFUNC_PER_VERTEX       = 4
+} SVGA3dFogFunction;
+
+/*
+ * SVGA3D_FOGTYPE_* specifies if fog factors are computed on a per-vertex
+ * or per-pixel basis.
+ */
+typedef enum {
+   SVGA3D_FOGTYPE_INVALID          = 0,
+   SVGA3D_FOGTYPE_VERTEX           = 1,
+   SVGA3D_FOGTYPE_PIXEL            = 2,
+   SVGA3D_FOGTYPE_MAX              = 3
+} SVGA3dFogType;
+
+/*
+ * SVGA3D_FOGBASE_* selects depth or range-based fog. Depth-based fog is
+ * computed using the eye Z value of each pixel (or vertex), whereas range-
+ * based fog is computed using the actual distance (range) to the eye.
+ */
+typedef enum {
+   SVGA3D_FOGBASE_INVALID          = 0,
+   SVGA3D_FOGBASE_DEPTHBASED       = 1,
+   SVGA3D_FOGBASE_RANGEBASED       = 2,
+   SVGA3D_FOGBASE_MAX              = 3
+} SVGA3dFogBase;
+
+typedef enum {
+   SVGA3D_STENCILOP_INVALID        = 0,
+   SVGA3D_STENCILOP_KEEP           = 1,
+   SVGA3D_STENCILOP_ZERO           = 2,
+   SVGA3D_STENCILOP_REPLACE        = 3,
+   SVGA3D_STENCILOP_INCRSAT        = 4,
+   SVGA3D_STENCILOP_DECRSAT        = 5,
+   SVGA3D_STENCILOP_INVERT         = 6,
+   SVGA3D_STENCILOP_INCR           = 7,
+   SVGA3D_STENCILOP_DECR           = 8,
+   SVGA3D_STENCILOP_MAX
+} SVGA3dStencilOp;
+
+typedef enum {
+   SVGA3D_CLIPPLANE_0              = (1 << 0),
+   SVGA3D_CLIPPLANE_1              = (1 << 1),
+   SVGA3D_CLIPPLANE_2              = (1 << 2),
+   SVGA3D_CLIPPLANE_3              = (1 << 3),
+   SVGA3D_CLIPPLANE_4              = (1 << 4),
+   SVGA3D_CLIPPLANE_5              = (1 << 5),
+} SVGA3dClipPlanes;
+
+typedef enum {
+   SVGA3D_CLEAR_COLOR              = 0x1,
+   SVGA3D_CLEAR_DEPTH              = 0x2,
+   SVGA3D_CLEAR_STENCIL            = 0x4
+} SVGA3dClearFlag;
+
+typedef enum {
+   SVGA3D_RT_DEPTH                 = 0,
+   SVGA3D_RT_STENCIL               = 1,
+   SVGA3D_RT_COLOR0                = 2,
+   SVGA3D_RT_COLOR1                = 3,
+   SVGA3D_RT_COLOR2                = 4,
+   SVGA3D_RT_COLOR3                = 5,
+   SVGA3D_RT_COLOR4                = 6,
+   SVGA3D_RT_COLOR5                = 7,
+   SVGA3D_RT_COLOR6                = 8,
+   SVGA3D_RT_COLOR7                = 9,
+   SVGA3D_RT_MAX,
+   SVGA3D_RT_INVALID               = ((uint32)-1),
+} SVGA3dRenderTargetType;
+
+#define SVGA3D_MAX_RT_COLOR (SVGA3D_RT_COLOR7 - SVGA3D_RT_COLOR0 + 1)
+
+typedef
+union {
+   struct {
+      uint32  red   : 1;
+      uint32  green : 1;
+      uint32  blue  : 1;
+      uint32  alpha : 1;
+   };
+   uint32 uintValue;
+} SVGA3dColorMask;
+
+typedef enum {
+   SVGA3D_VBLEND_DISABLE            = 0,
+   SVGA3D_VBLEND_1WEIGHT            = 1,
+   SVGA3D_VBLEND_2WEIGHT            = 2,
+   SVGA3D_VBLEND_3WEIGHT            = 3,
+} SVGA3dVertexBlendFlags;
+
+typedef enum {
+   SVGA3D_WRAPCOORD_0   = 1 << 0,
+   SVGA3D_WRAPCOORD_1   = 1 << 1,
+   SVGA3D_WRAPCOORD_2   = 1 << 2,
+   SVGA3D_WRAPCOORD_3   = 1 << 3,
+   SVGA3D_WRAPCOORD_ALL = 0xF,
+} SVGA3dWrapFlags;
+
+/*
+ * SVGA_3D_CMD_TEXTURESTATE Types.  All value types
+ * must fit in a uint32.
+ */
+
+typedef enum {
+   SVGA3D_TS_INVALID                    = 0,
+   SVGA3D_TS_BIND_TEXTURE               = 1,    /* SVGA3dSurfaceId */
+   SVGA3D_TS_COLOROP                    = 2,    /* SVGA3dTextureCombiner */
+   SVGA3D_TS_COLORARG1                  = 3,    /* SVGA3dTextureArgData */
+   SVGA3D_TS_COLORARG2                  = 4,    /* SVGA3dTextureArgData */
+   SVGA3D_TS_ALPHAOP                    = 5,    /* SVGA3dTextureCombiner */
+   SVGA3D_TS_ALPHAARG1                  = 6,    /* SVGA3dTextureArgData */
+   SVGA3D_TS_ALPHAARG2                  = 7,    /* SVGA3dTextureArgData */
+   SVGA3D_TS_ADDRESSU                   = 8,    /* SVGA3dTextureAddress */
+   SVGA3D_TS_ADDRESSV                   = 9,    /* SVGA3dTextureAddress */
+   SVGA3D_TS_MIPFILTER                  = 10,   /* SVGA3dTextureFilter */
+   SVGA3D_TS_MAGFILTER                  = 11,   /* SVGA3dTextureFilter */
+   SVGA3D_TS_MINFILTER                  = 12,   /* SVGA3dTextureFilter */
+   SVGA3D_TS_BORDERCOLOR                = 13,   /* SVGA3dColor */
+   SVGA3D_TS_TEXCOORDINDEX              = 14,   /* uint32 */
+   SVGA3D_TS_TEXTURETRANSFORMFLAGS      = 15,   /* SVGA3dTexTransformFlags */
+   SVGA3D_TS_TEXCOORDGEN                = 16,   /* SVGA3dTextureCoordGen */
+   SVGA3D_TS_BUMPENVMAT00               = 17,   /* float */
+   SVGA3D_TS_BUMPENVMAT01               = 18,   /* float */
+   SVGA3D_TS_BUMPENVMAT10               = 19,   /* float */
+   SVGA3D_TS_BUMPENVMAT11               = 20,   /* float */
+   SVGA3D_TS_TEXTURE_MIPMAP_LEVEL       = 21,   /* uint32 */
+   SVGA3D_TS_TEXTURE_LOD_BIAS           = 22,   /* float */
+   SVGA3D_TS_TEXTURE_ANISOTROPIC_LEVEL  = 23,   /* uint32 */
+   SVGA3D_TS_ADDRESSW                   = 24,   /* SVGA3dTextureAddress */
+
+
+   /*
+    * Sampler Gamma Level
+    *
+    * Sampler gamma effects the color of samples taken from the sampler.  A
+    * value of 1.0 will produce linear samples.  If the value is <= 0.0 the
+    * gamma value is ignored and a linear space is used.
+    */
+
+   SVGA3D_TS_GAMMA                      = 25,   /* float */
+   SVGA3D_TS_BUMPENVLSCALE              = 26,   /* float */
+   SVGA3D_TS_BUMPENVLOFFSET             = 27,   /* float */
+   SVGA3D_TS_COLORARG0                  = 28,   /* SVGA3dTextureArgData */
+   SVGA3D_TS_ALPHAARG0                  = 29,   /* SVGA3dTextureArgData */
+   SVGA3D_TS_MAX
+} SVGA3dTextureStateName;
+
+typedef enum {
+   SVGA3D_TC_INVALID                   = 0,
+   SVGA3D_TC_DISABLE                   = 1,
+   SVGA3D_TC_SELECTARG1                = 2,
+   SVGA3D_TC_SELECTARG2                = 3,
+   SVGA3D_TC_MODULATE                  = 4,
+   SVGA3D_TC_ADD                       = 5,
+   SVGA3D_TC_ADDSIGNED                 = 6,
+   SVGA3D_TC_SUBTRACT                  = 7,
+   SVGA3D_TC_BLENDTEXTUREALPHA         = 8,
+   SVGA3D_TC_BLENDDIFFUSEALPHA         = 9,
+   SVGA3D_TC_BLENDCURRENTALPHA         = 10,
+   SVGA3D_TC_BLENDFACTORALPHA          = 11,
+   SVGA3D_TC_MODULATE2X                = 12,
+   SVGA3D_TC_MODULATE4X                = 13,
+   SVGA3D_TC_DSDT                      = 14,
+   SVGA3D_TC_DOTPRODUCT3               = 15,
+   SVGA3D_TC_BLENDTEXTUREALPHAPM       = 16,
+   SVGA3D_TC_ADDSIGNED2X               = 17,
+   SVGA3D_TC_ADDSMOOTH                 = 18,
+   SVGA3D_TC_PREMODULATE               = 19,
+   SVGA3D_TC_MODULATEALPHA_ADDCOLOR    = 20,
+   SVGA3D_TC_MODULATECOLOR_ADDALPHA    = 21,
+   SVGA3D_TC_MODULATEINVALPHA_ADDCOLOR = 22,
+   SVGA3D_TC_MODULATEINVCOLOR_ADDALPHA = 23,
+   SVGA3D_TC_BUMPENVMAPLUMINANCE       = 24,
+   SVGA3D_TC_MULTIPLYADD               = 25,
+   SVGA3D_TC_LERP                      = 26,
+   SVGA3D_TC_MAX
+} SVGA3dTextureCombiner;
+
+#define SVGA3D_TC_CAP_BIT(svga3d_tc_op) (svga3d_tc_op ? (1 << (svga3d_tc_op - 1)) : 0)
+
+typedef enum {
+   SVGA3D_TEX_ADDRESS_INVALID    = 0,
+   SVGA3D_TEX_ADDRESS_WRAP       = 1,
+   SVGA3D_TEX_ADDRESS_MIRROR     = 2,
+   SVGA3D_TEX_ADDRESS_CLAMP      = 3,
+   SVGA3D_TEX_ADDRESS_BORDER     = 4,
+   SVGA3D_TEX_ADDRESS_MIRRORONCE = 5,
+   SVGA3D_TEX_ADDRESS_EDGE       = 6,
+   SVGA3D_TEX_ADDRESS_MAX
+} SVGA3dTextureAddress;
+
+/*
+ * SVGA3D_TEX_FILTER_NONE as the minification filter means mipmapping is
+ * disabled, and the rasterizer should use the magnification filter instead.
+ */
+typedef enum {
+   SVGA3D_TEX_FILTER_NONE           = 0,
+   SVGA3D_TEX_FILTER_NEAREST        = 1,
+   SVGA3D_TEX_FILTER_LINEAR         = 2,
+   SVGA3D_TEX_FILTER_ANISOTROPIC    = 3,
+   SVGA3D_TEX_FILTER_FLATCUBIC      = 4, // Deprecated, not implemented
+   SVGA3D_TEX_FILTER_GAUSSIANCUBIC  = 5, // Deprecated, not implemented
+   SVGA3D_TEX_FILTER_PYRAMIDALQUAD  = 6, // Not currently implemented
+   SVGA3D_TEX_FILTER_GAUSSIANQUAD   = 7, // Not currently implemented
+   SVGA3D_TEX_FILTER_MAX
+} SVGA3dTextureFilter;
+
+typedef enum {
+   SVGA3D_TEX_TRANSFORM_OFF    = 0,
+   SVGA3D_TEX_TRANSFORM_S      = (1 << 0),
+   SVGA3D_TEX_TRANSFORM_T      = (1 << 1),
+   SVGA3D_TEX_TRANSFORM_R      = (1 << 2),
+   SVGA3D_TEX_TRANSFORM_Q      = (1 << 3),
+   SVGA3D_TEX_PROJECTED        = (1 << 15),
+} SVGA3dTexTransformFlags;
+
+typedef enum {
+   SVGA3D_TEXCOORD_GEN_OFF              = 0,
+   SVGA3D_TEXCOORD_GEN_EYE_POSITION     = 1,
+   SVGA3D_TEXCOORD_GEN_EYE_NORMAL       = 2,
+   SVGA3D_TEXCOORD_GEN_REFLECTIONVECTOR = 3,
+   SVGA3D_TEXCOORD_GEN_SPHERE           = 4,
+   SVGA3D_TEXCOORD_GEN_MAX
+} SVGA3dTextureCoordGen;
+
+/*
+ * Texture argument constants for texture combiner
+ */
+typedef enum {
+   SVGA3D_TA_INVALID    = 0,
+   SVGA3D_TA_CONSTANT   = 1,
+   SVGA3D_TA_PREVIOUS   = 2,
+   SVGA3D_TA_DIFFUSE    = 3,
+   SVGA3D_TA_TEXTURE    = 4,
+   SVGA3D_TA_SPECULAR   = 5,
+   SVGA3D_TA_MAX
+} SVGA3dTextureArgData;
+
+#define SVGA3D_TM_MASK_LEN 4
+
+/* Modifiers for texture argument constants defined above. */
+typedef enum {
+   SVGA3D_TM_NONE       = 0,
+   SVGA3D_TM_ALPHA      = (1 << SVGA3D_TM_MASK_LEN),
+   SVGA3D_TM_ONE_MINUS  = (2 << SVGA3D_TM_MASK_LEN),
+} SVGA3dTextureArgModifier;
+
+#define SVGA3D_INVALID_ID         ((uint32)-1)
+#define SVGA3D_MAX_CLIP_PLANES    6
+
+/*
+ * This is the limit to the number of fixed-function texture
+ * transforms and texture coordinates we can support. It does *not*
+ * correspond to the number of texture image units (samplers) we
+ * support!
+ */
+#define SVGA3D_MAX_TEXTURE_COORDS 8
+
+/*
+ * Vertex declarations
+ *
+ * Notes:
+ *
+ * SVGA3D_DECLUSAGE_POSITIONT is for pre-transformed vertices. If you
+ * draw with any POSITIONT vertex arrays, the programmable vertex
+ * pipeline will be implicitly disabled. Drawing will take place as if
+ * no vertex shader was bound.
+ */
+
+typedef enum {
+   SVGA3D_DECLUSAGE_POSITION     = 0,
+   SVGA3D_DECLUSAGE_BLENDWEIGHT,       //  1
+   SVGA3D_DECLUSAGE_BLENDINDICES,      //  2
+   SVGA3D_DECLUSAGE_NORMAL,            //  3
+   SVGA3D_DECLUSAGE_PSIZE,             //  4
+   SVGA3D_DECLUSAGE_TEXCOORD,          //  5
+   SVGA3D_DECLUSAGE_TANGENT,           //  6
+   SVGA3D_DECLUSAGE_BINORMAL,          //  7
+   SVGA3D_DECLUSAGE_TESSFACTOR,        //  8
+   SVGA3D_DECLUSAGE_POSITIONT,         //  9
+   SVGA3D_DECLUSAGE_COLOR,             // 10
+   SVGA3D_DECLUSAGE_FOG,               // 11
+   SVGA3D_DECLUSAGE_DEPTH,             // 12
+   SVGA3D_DECLUSAGE_SAMPLE,            // 13
+   SVGA3D_DECLUSAGE_MAX
+} SVGA3dDeclUsage;
+
+typedef enum {
+   SVGA3D_DECLMETHOD_DEFAULT     = 0,
+   SVGA3D_DECLMETHOD_PARTIALU,
+   SVGA3D_DECLMETHOD_PARTIALV,
+   SVGA3D_DECLMETHOD_CROSSUV,          // Normal
+   SVGA3D_DECLMETHOD_UV,
+   SVGA3D_DECLMETHOD_LOOKUP,           // Lookup a displacement map
+   SVGA3D_DECLMETHOD_LOOKUPPRESAMPLED, // Lookup a pre-sampled displacement map
+} SVGA3dDeclMethod;
+
+typedef enum {
+   SVGA3D_DECLTYPE_FLOAT1        =  0,
+   SVGA3D_DECLTYPE_FLOAT2        =  1,
+   SVGA3D_DECLTYPE_FLOAT3        =  2,
+   SVGA3D_DECLTYPE_FLOAT4        =  3,
+   SVGA3D_DECLTYPE_D3DCOLOR      =  4,
+   SVGA3D_DECLTYPE_UBYTE4        =  5,
+   SVGA3D_DECLTYPE_SHORT2        =  6,
+   SVGA3D_DECLTYPE_SHORT4        =  7,
+   SVGA3D_DECLTYPE_UBYTE4N       =  8,
+   SVGA3D_DECLTYPE_SHORT2N       =  9,
+   SVGA3D_DECLTYPE_SHORT4N       = 10,
+   SVGA3D_DECLTYPE_USHORT2N      = 11,
+   SVGA3D_DECLTYPE_USHORT4N      = 12,
+   SVGA3D_DECLTYPE_UDEC3         = 13,
+   SVGA3D_DECLTYPE_DEC3N         = 14,
+   SVGA3D_DECLTYPE_FLOAT16_2     = 15,
+   SVGA3D_DECLTYPE_FLOAT16_4     = 16,
+   SVGA3D_DECLTYPE_MAX,
+} SVGA3dDeclType;
+
+/*
+ * This structure is used for the divisor for geometry instancing;
+ * it's a direct translation of the Direct3D equivalent.
+ */
+typedef union {
+   struct {
+      /*
+       * For index data, this number represents the number of instances to draw.
+       * For instance data, this number represents the number of
+       * instances/vertex in this stream
+       */
+      uint32 count : 30;
+
+      /*
+       * This is 1 if this is supposed to be the data that is repeated for
+       * every instance.
+       */
+      uint32 indexedData : 1;
+
+      /*
+       * This is 1 if this is supposed to be the per-instance data.
+       */
+      uint32 instanceData : 1;
+   };
+
+   uint32 value;
+} SVGA3dVertexDivisor;
+
+typedef enum {
+   SVGA3D_PRIMITIVE_INVALID                     = 0,
+   SVGA3D_PRIMITIVE_TRIANGLELIST                = 1,
+   SVGA3D_PRIMITIVE_POINTLIST                   = 2,
+   SVGA3D_PRIMITIVE_LINELIST                    = 3,
+   SVGA3D_PRIMITIVE_LINESTRIP                   = 4,
+   SVGA3D_PRIMITIVE_TRIANGLESTRIP               = 5,
+   SVGA3D_PRIMITIVE_TRIANGLEFAN                 = 6,
+   SVGA3D_PRIMITIVE_MAX
+} SVGA3dPrimitiveType;
+
+typedef enum {
+   SVGA3D_COORDINATE_INVALID                   = 0,
+   SVGA3D_COORDINATE_LEFTHANDED                = 1,
+   SVGA3D_COORDINATE_RIGHTHANDED               = 2,
+   SVGA3D_COORDINATE_MAX
+} SVGA3dCoordinateType;
+
+typedef enum {
+   SVGA3D_TRANSFORM_INVALID                     = 0,
+   SVGA3D_TRANSFORM_WORLD                       = 1,
+   SVGA3D_TRANSFORM_VIEW                        = 2,
+   SVGA3D_TRANSFORM_PROJECTION                  = 3,
+   SVGA3D_TRANSFORM_TEXTURE0                    = 4,
+   SVGA3D_TRANSFORM_TEXTURE1                    = 5,
+   SVGA3D_TRANSFORM_TEXTURE2                    = 6,
+   SVGA3D_TRANSFORM_TEXTURE3                    = 7,
+   SVGA3D_TRANSFORM_TEXTURE4                    = 8,
+   SVGA3D_TRANSFORM_TEXTURE5                    = 9,
+   SVGA3D_TRANSFORM_TEXTURE6                    = 10,
+   SVGA3D_TRANSFORM_TEXTURE7                    = 11,
+   SVGA3D_TRANSFORM_WORLD1                      = 12,
+   SVGA3D_TRANSFORM_WORLD2                      = 13,
+   SVGA3D_TRANSFORM_WORLD3                      = 14,
+   SVGA3D_TRANSFORM_MAX
+} SVGA3dTransformType;
+
+typedef enum {
+   SVGA3D_LIGHTTYPE_INVALID                     = 0,
+   SVGA3D_LIGHTTYPE_POINT                       = 1,
+   SVGA3D_LIGHTTYPE_SPOT1                       = 2, /* 1-cone, in degrees */
+   SVGA3D_LIGHTTYPE_SPOT2                       = 3, /* 2-cone, in radians */
+   SVGA3D_LIGHTTYPE_DIRECTIONAL                 = 4,
+   SVGA3D_LIGHTTYPE_MAX
+} SVGA3dLightType;
+
+typedef enum {
+   SVGA3D_CUBEFACE_POSX                         = 0,
+   SVGA3D_CUBEFACE_NEGX                         = 1,
+   SVGA3D_CUBEFACE_POSY                         = 2,
+   SVGA3D_CUBEFACE_NEGY                         = 3,
+   SVGA3D_CUBEFACE_POSZ                         = 4,
+   SVGA3D_CUBEFACE_NEGZ                         = 5,
+} SVGA3dCubeFace;
+
+typedef enum {
+   SVGA3D_SHADERTYPE_COMPILED_DX8               = 0,
+   SVGA3D_SHADERTYPE_VS                         = 1,
+   SVGA3D_SHADERTYPE_PS                         = 2,
+   SVGA3D_SHADERTYPE_MAX
+} SVGA3dShaderType;
+
+typedef enum {
+   SVGA3D_CONST_TYPE_FLOAT                      = 0,
+   SVGA3D_CONST_TYPE_INT                        = 1,
+   SVGA3D_CONST_TYPE_BOOL                       = 2,
+} SVGA3dShaderConstType;
+
+#define SVGA3D_MAX_SURFACE_FACES                6
+
+typedef enum {
+   SVGA3D_STRETCH_BLT_POINT                     = 0,
+   SVGA3D_STRETCH_BLT_LINEAR                    = 1,
+   SVGA3D_STRETCH_BLT_MAX
+} SVGA3dStretchBltMode;
+
+typedef enum {
+   SVGA3D_QUERYTYPE_OCCLUSION                   = 0,
+   SVGA3D_QUERYTYPE_MAX
+} SVGA3dQueryType;
+
+typedef enum {
+   SVGA3D_QUERYSTATE_PENDING     = 0,      /* Waiting on the host (set by guest) */
+   SVGA3D_QUERYSTATE_SUCCEEDED   = 1,      /* Completed successfully (set by host) */
+   SVGA3D_QUERYSTATE_FAILED      = 2,      /* Completed unsuccessfully (set by host) */
+   SVGA3D_QUERYSTATE_NEW         = 3,      /* Never submitted (For guest use only) */
+} SVGA3dQueryState;
+
+typedef enum {
+   SVGA3D_WRITE_HOST_VRAM        = 1,
+   SVGA3D_READ_HOST_VRAM         = 2,
+} SVGA3dTransferType;
+
+/*
+ * The maximum number vertex arrays we're guaranteed to support in
+ * SVGA_3D_CMD_DRAWPRIMITIVES.
+ */
+#define SVGA3D_MAX_VERTEX_ARRAYS   32
+
+/*
+ * Identifiers for commands in the command FIFO.
+ *
+ * IDs between 1000 and 1039 (inclusive) were used by obsolete versions of
+ * the SVGA3D protocol and remain reserved; they should not be used in the
+ * future.
+ *
+ * IDs between 1040 and 1999 (inclusive) are available for use by the
+ * current SVGA3D protocol.
+ *
+ * FIFO clients other than SVGA3D should stay below 1000, or at 2000
+ * and up.
+ */
+
+#define SVGA_3D_CMD_LEGACY_BASE            1000
+#define SVGA_3D_CMD_BASE                   1040
+
+#define SVGA_3D_CMD_SURFACE_DEFINE         SVGA_3D_CMD_BASE + 0
+#define SVGA_3D_CMD_SURFACE_DESTROY        SVGA_3D_CMD_BASE + 1
+#define SVGA_3D_CMD_SURFACE_COPY           SVGA_3D_CMD_BASE + 2
+#define SVGA_3D_CMD_SURFACE_STRETCHBLT     SVGA_3D_CMD_BASE + 3
+#define SVGA_3D_CMD_SURFACE_DMA            SVGA_3D_CMD_BASE + 4
+#define SVGA_3D_CMD_CONTEXT_DEFINE         SVGA_3D_CMD_BASE + 5
+#define SVGA_3D_CMD_CONTEXT_DESTROY        SVGA_3D_CMD_BASE + 6
+#define SVGA_3D_CMD_SETTRANSFORM           SVGA_3D_CMD_BASE + 7
+#define SVGA_3D_CMD_SETZRANGE              SVGA_3D_CMD_BASE + 8
+#define SVGA_3D_CMD_SETRENDERSTATE         SVGA_3D_CMD_BASE + 9
+#define SVGA_3D_CMD_SETRENDERTARGET        SVGA_3D_CMD_BASE + 10
+#define SVGA_3D_CMD_SETTEXTURESTATE        SVGA_3D_CMD_BASE + 11
+#define SVGA_3D_CMD_SETMATERIAL            SVGA_3D_CMD_BASE + 12
+#define SVGA_3D_CMD_SETLIGHTDATA           SVGA_3D_CMD_BASE + 13
+#define SVGA_3D_CMD_SETLIGHTENABLED        SVGA_3D_CMD_BASE + 14
+#define SVGA_3D_CMD_SETVIEWPORT            SVGA_3D_CMD_BASE + 15
+#define SVGA_3D_CMD_SETCLIPPLANE           SVGA_3D_CMD_BASE + 16
+#define SVGA_3D_CMD_CLEAR                  SVGA_3D_CMD_BASE + 17
+#define SVGA_3D_CMD_PRESENT                SVGA_3D_CMD_BASE + 18    // Deprecated
+#define SVGA_3D_CMD_SHADER_DEFINE          SVGA_3D_CMD_BASE + 19
+#define SVGA_3D_CMD_SHADER_DESTROY         SVGA_3D_CMD_BASE + 20
+#define SVGA_3D_CMD_SET_SHADER             SVGA_3D_CMD_BASE + 21
+#define SVGA_3D_CMD_SET_SHADER_CONST       SVGA_3D_CMD_BASE + 22
+#define SVGA_3D_CMD_DRAW_PRIMITIVES        SVGA_3D_CMD_BASE + 23
+#define SVGA_3D_CMD_SETSCISSORRECT         SVGA_3D_CMD_BASE + 24
+#define SVGA_3D_CMD_BEGIN_QUERY            SVGA_3D_CMD_BASE + 25
+#define SVGA_3D_CMD_END_QUERY              SVGA_3D_CMD_BASE + 26
+#define SVGA_3D_CMD_WAIT_FOR_QUERY         SVGA_3D_CMD_BASE + 27
+#define SVGA_3D_CMD_PRESENT_READBACK       SVGA_3D_CMD_BASE + 28    // Deprecated
+#define SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN SVGA_3D_CMD_BASE + 29
+#define SVGA_3D_CMD_MAX                    SVGA_3D_CMD_BASE + 30
+
+#define SVGA_3D_CMD_FUTURE_MAX             2000
+
+/*
+ * Common substructures used in multiple FIFO commands:
+ */
+
+typedef struct {
+   union {
+      struct {
+         uint16  function;       // SVGA3dFogFunction
+         uint8   type;           // SVGA3dFogType
+         uint8   base;           // SVGA3dFogBase
+      };
+      uint32     uintValue;
+   };
+} SVGA3dFogMode;
+
+/*
+ * Uniquely identify one image (a 1D/2D/3D array) from a surface. This
+ * is a surface ID as well as face/mipmap indices.
+ */
+
+typedef
+struct SVGA3dSurfaceImageId {
+   uint32               sid;
+   uint32               face;
+   uint32               mipmap;
+} SVGA3dSurfaceImageId;
+
+typedef
+struct SVGA3dGuestImage {
+   SVGAGuestPtr         ptr;
+
+   /*
+    * A note on interpretation of pitch: This value of pitch is the
+    * number of bytes between vertically adjacent image
+    * blocks. Normally this is the number of bytes between the first
+    * pixel of two adjacent scanlines. With compressed textures,
+    * however, this may represent the number of bytes between
+    * compression blocks rather than between rows of pixels.
+    *
+    * XXX: Compressed textures currently must be tightly packed in guest memory.
+    *
+    * If the image is 1-dimensional, pitch is ignored.
+    *
+    * If 'pitch' is zero, the SVGA3D device calculates a pitch value
+    * assuming each row of blocks is tightly packed.
+    */
+   uint32 pitch;
+} SVGA3dGuestImage;
+
+
+/*
+ * FIFO command format definitions:
+ */
+
+/*
+ * The data size header following cmdNum for every 3d command
+ */
+typedef
+struct {
+   uint32               id;
+   uint32               size;
+} SVGA3dCmdHeader;
+
+/*
+ * A surface is a hierarchy of host VRAM surfaces: 1D, 2D, or 3D, with
+ * optional mipmaps and cube faces.
+ */
+
+typedef
+struct {
+   uint32               width;
+   uint32               height;
+   uint32               depth;
+} SVGA3dSize;
+
+typedef enum {
+   SVGA3D_SURFACE_CUBEMAP              = (1 << 0),
+   SVGA3D_SURFACE_HINT_STATIC          = (1 << 1),
+   SVGA3D_SURFACE_HINT_DYNAMIC         = (1 << 2),
+   SVGA3D_SURFACE_HINT_INDEXBUFFER     = (1 << 3),
+   SVGA3D_SURFACE_HINT_VERTEXBUFFER    = (1 << 4),
+   SVGA3D_SURFACE_HINT_TEXTURE         = (1 << 5),
+   SVGA3D_SURFACE_HINT_RENDERTARGET    = (1 << 6),
+   SVGA3D_SURFACE_HINT_DEPTHSTENCIL    = (1 << 7),
+   SVGA3D_SURFACE_HINT_WRITEONLY       = (1 << 8),
+} SVGA3dSurfaceFlags;
+
+typedef
+struct {
+   uint32               numMipLevels;
+} SVGA3dSurfaceFace;
+
+typedef
+struct {
+   uint32                      sid;
+   SVGA3dSurfaceFlags          surfaceFlags;
+   SVGA3dSurfaceFormat         format;
+   SVGA3dSurfaceFace           face[SVGA3D_MAX_SURFACE_FACES];
+   /*
+    * Followed by an SVGA3dSize structure for each mip level in each face.
+    *
+    * A note on surface sizes: Sizes are always specified in pixels,
+    * even if the true surface size is not a multiple of the minimum
+    * block size of the surface's format. For example, a 3x3x1 DXT1
+    * compressed texture would actually be stored as a 4x4x1 image in
+    * memory.
+    */
+} SVGA3dCmdDefineSurface;       /* SVGA_3D_CMD_SURFACE_DEFINE */
+
+typedef
+struct {
+   uint32               sid;
+} SVGA3dCmdDestroySurface;      /* SVGA_3D_CMD_SURFACE_DESTROY */
+
+typedef
+struct {
+   uint32               cid;
+} SVGA3dCmdDefineContext;       /* SVGA_3D_CMD_CONTEXT_DEFINE */
+
+typedef
+struct {
+   uint32               cid;
+} SVGA3dCmdDestroyContext;      /* SVGA_3D_CMD_CONTEXT_DESTROY */
+
+typedef
+struct {
+   uint32               cid;
+   SVGA3dClearFlag      clearFlag;
+   uint32               color;
+   float                depth;
+   uint32               stencil;
+   /* Followed by variable number of SVGA3dRect structures */
+} SVGA3dCmdClear;               /* SVGA_3D_CMD_CLEAR */
+
+typedef
+struct SVGA3dCopyRect {
+   uint32               x;
+   uint32               y;
+   uint32               w;
+   uint32               h;
+   uint32               srcx;
+   uint32               srcy;
+} SVGA3dCopyRect;
+
+typedef
+struct SVGA3dCopyBox {
+   uint32               x;
+   uint32               y;
+   uint32               z;
+   uint32               w;
+   uint32               h;
+   uint32               d;
+   uint32               srcx;
+   uint32               srcy;
+   uint32               srcz;
+} SVGA3dCopyBox;
+
+typedef
+struct {
+   uint32               x;
+   uint32               y;
+   uint32               w;
+   uint32               h;
+} SVGA3dRect;
+
+typedef
+struct {
+   uint32               x;
+   uint32               y;
+   uint32               z;
+   uint32               w;
+   uint32               h;
+   uint32               d;
+} SVGA3dBox;
+
+typedef
+struct {
+   uint32               x;
+   uint32               y;
+   uint32               z;
+} SVGA3dPoint;
+
+typedef
+struct {
+   SVGA3dLightType      type;
+   SVGA3dBool           inWorldSpace;
+   float                diffuse[4];
+   float                specular[4];
+   float                ambient[4];
+   float                position[4];
+   float                direction[4];
+   float                range;
+   float                falloff;
+   float                attenuation0;
+   float                attenuation1;
+   float                attenuation2;
+   float                theta;
+   float                phi;
+} SVGA3dLightData;
+
+typedef
+struct {
+   uint32               sid;
+   /* Followed by variable number of SVGA3dCopyRect structures */
+} SVGA3dCmdPresent;             /* SVGA_3D_CMD_PRESENT */
+
+typedef
+struct {
+   SVGA3dRenderStateName   state;
+   union {
+      uint32               uintValue;
+      float                floatValue;
+   };
+} SVGA3dRenderState;
+
+typedef
+struct {
+   uint32               cid;
+   /* Followed by variable number of SVGA3dRenderState structures */
+} SVGA3dCmdSetRenderState;      /* SVGA_3D_CMD_SETRENDERSTATE */
+
+typedef
+struct {
+   uint32                 cid;
+   SVGA3dRenderTargetType type;
+   SVGA3dSurfaceImageId   target;
+} SVGA3dCmdSetRenderTarget;     /* SVGA_3D_CMD_SETRENDERTARGET */
+
+typedef
+struct {
+   SVGA3dSurfaceImageId  src;
+   SVGA3dSurfaceImageId  dest;
+   /* Followed by variable number of SVGA3dCopyBox structures */
+} SVGA3dCmdSurfaceCopy;               /* SVGA_3D_CMD_SURFACE_COPY */
+
+typedef
+struct {
+   SVGA3dSurfaceImageId  src;
+   SVGA3dSurfaceImageId  dest;
+   SVGA3dBox             boxSrc;
+   SVGA3dBox             boxDest;
+   SVGA3dStretchBltMode  mode;
+} SVGA3dCmdSurfaceStretchBlt;         /* SVGA_3D_CMD_SURFACE_STRETCHBLT */
+
+typedef
+struct {
+   /*
+    * If the discard flag is present in a surface DMA operation, the host may
+    * discard the contents of the current mipmap level and face of the target
+    * surface before applying the surface DMA contents.
+    */
+   uint32 discard : 1;
+
+   /*
+    * If the unsynchronized flag is present, the host may perform this upload
+    * without syncing to pending reads on this surface.
+    */
+   uint32 unsynchronized : 1;
+
+   /*
+    * Guests *MUST* set the reserved bits to 0 before submitting the command
+    * suffix as future flags may occupy these bits.
+    */
+   uint32 reserved : 30;
+} SVGA3dSurfaceDMAFlags;
+
+typedef
+struct {
+   SVGA3dGuestImage      guest;
+   SVGA3dSurfaceImageId  host;
+   SVGA3dTransferType    transfer;
+   /*
+    * Followed by variable number of SVGA3dCopyBox structures. For consistency
+    * in all clipping logic and coordinate translation, we define the
+    * "source" in each copyBox as the guest image and the
+    * "destination" as the host image, regardless of transfer
+    * direction.
+    *
+    * For efficiency, the SVGA3D device is free to copy more data than
+    * specified. For example, it may round copy boxes outwards such
+    * that they lie on particular alignment boundaries.
+    */
+} SVGA3dCmdSurfaceDMA;                /* SVGA_3D_CMD_SURFACE_DMA */
+
+/*
+ * SVGA3dCmdSurfaceDMASuffix --
+ *
+ *    This is a command suffix that will appear after a SurfaceDMA command in
+ *    the FIFO.  It contains some extra information that hosts may use to
+ *    optimize performance or protect the guest.  This suffix exists to preserve
+ *    backwards compatibility while also allowing for new functionality to be
+ *    implemented.
+ */
+
+typedef
+struct {
+   uint32 suffixSize;
+
+   /*
+    * The maximum offset is used to determine the maximum offset from the
+    * guestPtr base address that will be accessed or written to during this
+    * surfaceDMA.  If the suffix is supported, the host will respect this
+    * boundary while performing surface DMAs.
+    *
+    * Defaults to MAX_UINT32
+    */
+   uint32 maximumOffset;
+
+   /*
+    * A set of flags that describes optimizations that the host may perform
+    * while performing this surface DMA operation.  The guest should never rely
+    * on behaviour that is different when these flags are set for correctness.
+    *
+    * Defaults to 0
+    */
+   SVGA3dSurfaceDMAFlags flags;
+} SVGA3dCmdSurfaceDMASuffix;
+
+/*
+ * SVGA_3D_CMD_DRAW_PRIMITIVES --
+ *
+ *   This command is the SVGA3D device's generic drawing entry point.
+ *   It can draw multiple ranges of primitives, optionally using an
+ *   index buffer, using an arbitrary collection of vertex buffers.
+ *
+ *   Each SVGA3dVertexDecl defines a distinct vertex array to bind
+ *   during this draw call. The declarations specify which surface
+ *   the vertex data lives in, what that vertex data is used for,
+ *   and how to interpret it.
+ *
+ *   Each SVGA3dPrimitiveRange defines a collection of primitives
+ *   to render using the same vertex arrays. An index buffer is
+ *   optional.
+ */
+
+typedef
+struct {
+   /*
+    * A range hint is an optional specification for the range of indices
+    * in an SVGA3dArray that will be used. If 'last' is zero, it is assumed
+    * that the entire array will be used.
+    *
+    * These are only hints. The SVGA3D device may use them for
+    * performance optimization if possible, but it's also allowed to
+    * ignore these values.
+    */
+   uint32               first;
+   uint32               last;
+} SVGA3dArrayRangeHint;
+
+typedef
+struct {
+   /*
+    * Define the origin and shape of a vertex or index array. Both
+    * 'offset' and 'stride' are in bytes. The provided surface will be
+    * reinterpreted as a flat array of bytes in the same format used
+    * by surface DMA operations. To avoid unnecessary conversions, the
+    * surface should be created with the SVGA3D_BUFFER format.
+    *
+    * Index 0 in the array starts 'offset' bytes into the surface.
+    * Index 1 begins at byte 'offset + stride', etc. Array indices may
+    * not be negative.
+    */
+   uint32               surfaceId;
+   uint32               offset;
+   uint32               stride;
+} SVGA3dArray;
+
+typedef
+struct {
+   /*
+    * Describe a vertex array's data type, and define how it is to be
+    * used by the fixed function pipeline or the vertex shader. It
+    * isn't useful to have two VertexDecls with the same
+    * VertexArrayIdentity in one draw call.
+    */
+   SVGA3dDeclType       type;
+   SVGA3dDeclMethod     method;
+   SVGA3dDeclUsage      usage;
+   uint32               usageIndex;
+} SVGA3dVertexArrayIdentity;
+
+typedef
+struct {
+   SVGA3dVertexArrayIdentity  identity;
+   SVGA3dArray                array;
+   SVGA3dArrayRangeHint       rangeHint;
+} SVGA3dVertexDecl;
+
+typedef
+struct {
+   /*
+    * Define a group of primitives to render, from sequential indices.
+    *
+    * The value of 'primitiveType' and 'primitiveCount' imply the
+    * total number of vertices that will be rendered.
+    */
+   SVGA3dPrimitiveType  primType;
+   uint32               primitiveCount;
+
+   /*
+    * Optional index buffer. If indexArray.surfaceId is
+    * SVGA3D_INVALID_ID, we render without an index buffer. Rendering
+    * without an index buffer is identical to rendering with an index
+    * buffer containing the sequence [0, 1, 2, 3, ...].
+    *
+    * If an index buffer is in use, indexWidth specifies the width in
+    * bytes of each index value. It must be less than or equal to
+    * indexArray.stride.
+    *
+    * (Currently, the SVGA3D device requires index buffers to be tightly
+    * packed. In other words, indexWidth == indexArray.stride)
+    */
+   SVGA3dArray          indexArray;
+   uint32               indexWidth;
+
+   /*
+    * Optional index bias. This number is added to all indices from
+    * indexArray before they are used as vertex array indices. This
+    * can be used in multiple ways:
+    *
+    *  - When not using an indexArray, this bias can be used to
+    *    specify where in the vertex arrays to begin rendering.
+    *
+    *  - A positive number here is equivalent to increasing the
+    *    offset in each vertex array.
+    *
+    *  - A negative number can be used to render using a small
+    *    vertex array and an index buffer that contains large
+    *    values. This may be used by some applications that
+    *    crop a vertex buffer without modifying their index
+    *    buffer.
+    *
+    * Note that rendering with a negative bias value may be slower and
+    * use more memory than rendering with a positive or zero bias.
+    */
+   int32                indexBias;
+} SVGA3dPrimitiveRange;
+
+typedef
+struct {
+   uint32               cid;
+   uint32               numVertexDecls;
+   uint32               numRanges;
+
+   /*
+    * There are two variable size arrays after the
+    * SVGA3dCmdDrawPrimitives structure. In order,
+    * they are:
+    *
+    * 1. SVGA3dVertexDecl, quantity 'numVertexDecls'
+    * 2. SVGA3dPrimitiveRange, quantity 'numRanges'
+    * 3. Optionally, SVGA3dVertexDivisor, quantity 'numVertexDecls' (contains
+    *    the frequency divisor for this the corresponding vertex decl)
+    */
+} SVGA3dCmdDrawPrimitives;      /* SVGA_3D_CMD_DRAWPRIMITIVES */
+
+typedef
+struct {
+   uint32                   stage;
+   SVGA3dTextureStateName   name;
+   union {
+      uint32                value;
+      float                 floatValue;
+   };
+} SVGA3dTextureState;
+
+typedef
+struct {
+   uint32               cid;
+   /* Followed by variable number of SVGA3dTextureState structures */
+} SVGA3dCmdSetTextureState;      /* SVGA_3D_CMD_SETTEXTURESTATE */
+
+typedef
+struct {
+   uint32                   cid;
+   SVGA3dTransformType      type;
+   float                    matrix[16];
+} SVGA3dCmdSetTransform;          /* SVGA_3D_CMD_SETTRANSFORM */
+
+typedef
+struct {
+   float                min;
+   float                max;
+} SVGA3dZRange;
+
+typedef
+struct {
+   uint32               cid;
+   SVGA3dZRange         zRange;
+} SVGA3dCmdSetZRange;             /* SVGA_3D_CMD_SETZRANGE */
+
+typedef
+struct {
+   float                diffuse[4];
+   float                ambient[4];
+   float                specular[4];
+   float                emissive[4];
+   float                shininess;
+} SVGA3dMaterial;
+
+typedef
+struct {
+   uint32               cid;
+   SVGA3dFace           face;
+   SVGA3dMaterial       material;
+} SVGA3dCmdSetMaterial;           /* SVGA_3D_CMD_SETMATERIAL */
+
+typedef
+struct {
+   uint32               cid;
+   uint32               index;
+   SVGA3dLightData      data;
+} SVGA3dCmdSetLightData;           /* SVGA_3D_CMD_SETLIGHTDATA */
+
+typedef
+struct {
+   uint32               cid;
+   uint32               index;
+   uint32               enabled;
+} SVGA3dCmdSetLightEnabled;      /* SVGA_3D_CMD_SETLIGHTENABLED */
+
+typedef
+struct {
+   uint32               cid;
+   SVGA3dRect           rect;
+} SVGA3dCmdSetViewport;           /* SVGA_3D_CMD_SETVIEWPORT */
+
+typedef
+struct {
+   uint32               cid;
+   SVGA3dRect           rect;
+} SVGA3dCmdSetScissorRect;         /* SVGA_3D_CMD_SETSCISSORRECT */
+
+typedef
+struct {
+   uint32               cid;
+   uint32               index;
+   float                plane[4];
+} SVGA3dCmdSetClipPlane;           /* SVGA_3D_CMD_SETCLIPPLANE */
+
+typedef
+struct {
+   uint32               cid;
+   uint32               shid;
+   SVGA3dShaderType     type;
+   /* Followed by variable number of DWORDs for shader bycode */
+} SVGA3dCmdDefineShader;           /* SVGA_3D_CMD_SHADER_DEFINE */
+
+typedef
+struct {
+   uint32               cid;
+   uint32               shid;
+   SVGA3dShaderType     type;
+} SVGA3dCmdDestroyShader;         /* SVGA_3D_CMD_SHADER_DESTROY */
+
+typedef
+struct {
+   uint32                  cid;
+   uint32                  reg;     /* register number */
+   SVGA3dShaderType        type;
+   SVGA3dShaderConstType   ctype;
+   uint32                  values[4];
+} SVGA3dCmdSetShaderConst;        /* SVGA_3D_CMD_SET_SHADER_CONST */
+
+typedef
+struct {
+   uint32               cid;
+   SVGA3dShaderType     type;
+   uint32               shid;
+} SVGA3dCmdSetShader;             /* SVGA_3D_CMD_SET_SHADER */
+
+typedef
+struct {
+   uint32               cid;
+   SVGA3dQueryType      type;
+} SVGA3dCmdBeginQuery;           /* SVGA_3D_CMD_BEGIN_QUERY */
+
+typedef
+struct {
+   uint32               cid;
+   SVGA3dQueryType      type;
+   SVGAGuestPtr         guestResult;  /* Points to an SVGA3dQueryResult structure */
+} SVGA3dCmdEndQuery;                  /* SVGA_3D_CMD_END_QUERY */
+
+typedef
+struct {
+   uint32               cid;          /* Same parameters passed to END_QUERY */
+   SVGA3dQueryType      type;
+   SVGAGuestPtr         guestResult;
+} SVGA3dCmdWaitForQuery;              /* SVGA_3D_CMD_WAIT_FOR_QUERY */
+
+typedef
+struct {
+   uint32               totalSize;    /* Set by guest before query is ended. */
+   SVGA3dQueryState     state;        /* Set by host or guest. See SVGA3dQueryState. */
+   union {                            /* Set by host on exit from PENDING state */
+      uint32            result32;
+   };
+} SVGA3dQueryResult;
+
+/*
+ * SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN --
+ *
+ *    This is a blit from an SVGA3D surface to a Screen Object. Just
+ *    like GMR-to-screen blits, this blit may be directed at a
+ *    specific screen or to the virtual coordinate space.
+ *
+ *    The blit copies from a rectangular region of an SVGA3D surface
+ *    image to a rectangular region of a screen or screens.
+ *
+ *    This command takes an optional variable-length list of clipping
+ *    rectangles after the body of the command. If no rectangles are
+ *    specified, there is no clipping region. The entire destRect is
+ *    drawn to. If one or more rectangles are included, they describe
+ *    a clipping region. The clip rectangle coordinates are measured
+ *    relative to the top-left corner of destRect.
+ *
+ *    This clipping region serves multiple purposes:
+ *
+ *      - It can be used to perform an irregularly shaped blit more
+ *        efficiently than by issuing many separate blit commands.
+ *
+ *      - It is equivalent to allowing blits with non-integer
+ *        source coordinates. You could blit just one half-pixel
+ *        of a source, for example, by specifying a larger
+ *        destination rectangle than you need, then removing
+ *        part of it using a clip rectangle.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT
+ *
+ * Limitations:
+ *
+ *    - Currently, no backend supports blits from a mipmap or face
+ *      other than the first one.
+ */
+
+typedef
+struct {
+   SVGA3dSurfaceImageId srcImage;
+   SVGASignedRect       srcRect;
+   uint32               destScreenId; /* Screen ID or SVGA_ID_INVALID for virt. coords */
+   SVGASignedRect       destRect;     /* Supports scaling if src/rest different size */
+   /* Clipping: zero or more SVGASignedRects follow */
+} SVGA3dCmdBlitSurfaceToScreen;         /* SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN */
+
+
+/*
+ * Capability query index.
+ *
+ * Notes:
+ *
+ *   1. SVGA3D_DEVCAP_MAX_TEXTURES reflects the maximum number of
+ *      fixed-function texture units available. Each of these units
+ *      work in both FFP and Shader modes, and they support texture
+ *      transforms and texture coordinates. The host may have additional
+ *      texture image units that are only usable with shaders.
+ *
+ *   2. The BUFFER_FORMAT capabilities are deprecated, and they always
+ *      return TRUE. Even on physical hardware that does not support
+ *      these formats natively, the SVGA3D device will provide an emulation
+ *      which should be invisible to the guest OS.
+ *
+ *      In general, the SVGA3D device should support any operation on
+ *      any surface format, it just may perform some of these
+ *      operations in software depending on the capabilities of the
+ *      available physical hardware.
+ *
+ *      XXX: In the future, we will add capabilities that describe in
+ *      detail what formats are supported in hardware for what kinds
+ *      of operations.
+ */
+
+typedef enum {
+   SVGA3D_DEVCAP_3D                                = 0,
+   SVGA3D_DEVCAP_MAX_LIGHTS                        = 1,
+   SVGA3D_DEVCAP_MAX_TEXTURES                      = 2,  /* See note (1) */
+   SVGA3D_DEVCAP_MAX_CLIP_PLANES                   = 3,
+   SVGA3D_DEVCAP_VERTEX_SHADER_VERSION             = 4,
+   SVGA3D_DEVCAP_VERTEX_SHADER                     = 5,
+   SVGA3D_DEVCAP_FRAGMENT_SHADER_VERSION           = 6,
+   SVGA3D_DEVCAP_FRAGMENT_SHADER                   = 7,
+   SVGA3D_DEVCAP_MAX_RENDER_TARGETS                = 8,
+   SVGA3D_DEVCAP_S23E8_TEXTURES                    = 9,
+   SVGA3D_DEVCAP_S10E5_TEXTURES                    = 10,
+   SVGA3D_DEVCAP_MAX_FIXED_VERTEXBLEND             = 11,
+   SVGA3D_DEVCAP_D16_BUFFER_FORMAT                 = 12, /* See note (2) */
+   SVGA3D_DEVCAP_D24S8_BUFFER_FORMAT               = 13, /* See note (2) */
+   SVGA3D_DEVCAP_D24X8_BUFFER_FORMAT               = 14, /* See note (2) */
+   SVGA3D_DEVCAP_QUERY_TYPES                       = 15,
+   SVGA3D_DEVCAP_TEXTURE_GRADIENT_SAMPLING         = 16,
+   SVGA3D_DEVCAP_MAX_POINT_SIZE                    = 17,
+   SVGA3D_DEVCAP_MAX_SHADER_TEXTURES               = 18,
+   SVGA3D_DEVCAP_MAX_TEXTURE_WIDTH                 = 19,
+   SVGA3D_DEVCAP_MAX_TEXTURE_HEIGHT                = 20,
+   SVGA3D_DEVCAP_MAX_VOLUME_EXTENT                 = 21,
+   SVGA3D_DEVCAP_MAX_TEXTURE_REPEAT                = 22,
+   SVGA3D_DEVCAP_MAX_TEXTURE_ASPECT_RATIO          = 23,
+   SVGA3D_DEVCAP_MAX_TEXTURE_ANISOTROPY            = 24,
+   SVGA3D_DEVCAP_MAX_PRIMITIVE_COUNT               = 25,
+   SVGA3D_DEVCAP_MAX_VERTEX_INDEX                  = 26,
+   SVGA3D_DEVCAP_MAX_VERTEX_SHADER_INSTRUCTIONS    = 27,
+   SVGA3D_DEVCAP_MAX_FRAGMENT_SHADER_INSTRUCTIONS  = 28,
+   SVGA3D_DEVCAP_MAX_VERTEX_SHADER_TEMPS           = 29,
+   SVGA3D_DEVCAP_MAX_FRAGMENT_SHADER_TEMPS         = 30,
+   SVGA3D_DEVCAP_TEXTURE_OPS                       = 31,
+   SVGA3D_DEVCAP_SURFACEFMT_X8R8G8B8               = 32,
+   SVGA3D_DEVCAP_SURFACEFMT_A8R8G8B8               = 33,
+   SVGA3D_DEVCAP_SURFACEFMT_A2R10G10B10            = 34,
+   SVGA3D_DEVCAP_SURFACEFMT_X1R5G5B5               = 35,
+   SVGA3D_DEVCAP_SURFACEFMT_A1R5G5B5               = 36,
+   SVGA3D_DEVCAP_SURFACEFMT_A4R4G4B4               = 37,
+   SVGA3D_DEVCAP_SURFACEFMT_R5G6B5                 = 38,
+   SVGA3D_DEVCAP_SURFACEFMT_LUMINANCE16            = 39,
+   SVGA3D_DEVCAP_SURFACEFMT_LUMINANCE8_ALPHA8      = 40,
+   SVGA3D_DEVCAP_SURFACEFMT_ALPHA8                 = 41,
+   SVGA3D_DEVCAP_SURFACEFMT_LUMINANCE8             = 42,
+   SVGA3D_DEVCAP_SURFACEFMT_Z_D16                  = 43,
+   SVGA3D_DEVCAP_SURFACEFMT_Z_D24S8                = 44,
+   SVGA3D_DEVCAP_SURFACEFMT_Z_D24X8                = 45,
+   SVGA3D_DEVCAP_SURFACEFMT_DXT1                   = 46,
+   SVGA3D_DEVCAP_SURFACEFMT_DXT2                   = 47,
+   SVGA3D_DEVCAP_SURFACEFMT_DXT3                   = 48,
+   SVGA3D_DEVCAP_SURFACEFMT_DXT4                   = 49,
+   SVGA3D_DEVCAP_SURFACEFMT_DXT5                   = 50,
+   SVGA3D_DEVCAP_SURFACEFMT_BUMPX8L8V8U8           = 51,
+   SVGA3D_DEVCAP_SURFACEFMT_A2W10V10U10            = 52,
+   SVGA3D_DEVCAP_SURFACEFMT_BUMPU8V8               = 53,
+   SVGA3D_DEVCAP_SURFACEFMT_Q8W8V8U8               = 54,
+   SVGA3D_DEVCAP_SURFACEFMT_CxV8U8                 = 55,
+   SVGA3D_DEVCAP_SURFACEFMT_R_S10E5                = 56,
+   SVGA3D_DEVCAP_SURFACEFMT_R_S23E8                = 57,
+   SVGA3D_DEVCAP_SURFACEFMT_RG_S10E5               = 58,
+   SVGA3D_DEVCAP_SURFACEFMT_RG_S23E8               = 59,
+   SVGA3D_DEVCAP_SURFACEFMT_ARGB_S10E5             = 60,
+   SVGA3D_DEVCAP_SURFACEFMT_ARGB_S23E8             = 61,
+   SVGA3D_DEVCAP_MAX_VERTEX_SHADER_TEXTURES        = 63,
+
+   /*
+    * Note that MAX_SIMULTANEOUS_RENDER_TARGETS is a maximum count of color
+    * render targets.  This does no include the depth or stencil targets.
+    */
+   SVGA3D_DEVCAP_MAX_SIMULTANEOUS_RENDER_TARGETS   = 64,
+
+   SVGA3D_DEVCAP_SURFACEFMT_V16U16                 = 65,
+   SVGA3D_DEVCAP_SURFACEFMT_G16R16                 = 66,
+   SVGA3D_DEVCAP_SURFACEFMT_A16B16G16R16           = 67,
+   SVGA3D_DEVCAP_SURFACEFMT_UYVY                   = 68,
+   SVGA3D_DEVCAP_SURFACEFMT_YUY2                   = 69,
+
+   /*
+    * Don't add new caps into the previous section; the values in this
+    * enumeration must not change. You can put new values right before
+    * SVGA3D_DEVCAP_MAX.
+    */
+   SVGA3D_DEVCAP_MAX                                  /* This must be the last index. */
+} SVGA3dDevCapIndex;
+
+typedef union {
+   Bool   b;
+   uint32 u;
+   int32  i;
+   float  f;
+} SVGA3dDevCapResult;
+
+#endif /* _SVGA3D_REG_H_ */

drivers/gpu/drm/vmwgfx/svga_escape.h

@@ -0,0 +1,89 @@
+/**********************************************************
+ * Copyright 2007-2009 VMware, Inc.  All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ **********************************************************/
+
+/*
+ * svga_escape.h --
+ *
+ *    Definitions for our own (vendor-specific) SVGA Escape commands.
+ */
+
+#ifndef _SVGA_ESCAPE_H_
+#define _SVGA_ESCAPE_H_
+
+
+/*
+ * Namespace IDs for the escape command
+ */
+
+#define SVGA_ESCAPE_NSID_VMWARE 0x00000000
+#define SVGA_ESCAPE_NSID_DEVEL  0xFFFFFFFF
+
+
+/*
+ * Within SVGA_ESCAPE_NSID_VMWARE, we multiplex commands according to
+ * the first DWORD of escape data (after the nsID and size). As a
+ * guideline we're using the high word and low word as a major and
+ * minor command number, respectively.
+ *
+ * Major command number allocation:
+ *
+ *   0000: Reserved
+ *   0001: SVGA_ESCAPE_VMWARE_LOG (svga_binary_logger.h)
+ *   0002: SVGA_ESCAPE_VMWARE_VIDEO (svga_overlay.h)
+ *   0003: SVGA_ESCAPE_VMWARE_HINT (svga_escape.h)
+ */
+
+#define SVGA_ESCAPE_VMWARE_MAJOR_MASK  0xFFFF0000
+
+
+/*
+ * SVGA Hint commands.
+ *
+ * These escapes let the SVGA driver provide optional information to
+ * he host about the state of the guest or guest applications. The
+ * host can use these hints to make user interface or performance
+ * decisions.
+ *
+ * Notes:
+ *
+ *   - SVGA_ESCAPE_VMWARE_HINT_FULLSCREEN is deprecated for guests
+ *     that use the SVGA Screen Object extension. Instead of sending
+ *     this escape, use the SVGA_SCREEN_FULLSCREEN_HINT flag on your
+ *     Screen Object.
+ */
+
+#define SVGA_ESCAPE_VMWARE_HINT               0x00030000
+#define SVGA_ESCAPE_VMWARE_HINT_FULLSCREEN    0x00030001  // Deprecated
+
+typedef
+struct {
+   uint32 command;
+   uint32 fullscreen;
+   struct {
+      int32 x, y;
+   } monitorPosition;
+} SVGAEscapeHintFullscreen;
+
+#endif /* _SVGA_ESCAPE_H_ */

drivers/gpu/drm/vmwgfx/svga_overlay.h

@@ -0,0 +1,201 @@
+/**********************************************************
+ * Copyright 2007-2009 VMware, Inc.  All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ **********************************************************/
+
+/*
+ * svga_overlay.h --
+ *
+ *    Definitions for video-overlay support.
+ */
+
+#ifndef _SVGA_OVERLAY_H_
+#define _SVGA_OVERLAY_H_
+
+#include "svga_reg.h"
+
+/*
+ * Video formats we support
+ */
+
+#define VMWARE_FOURCC_YV12 0x32315659 // 'Y' 'V' '1' '2'
+#define VMWARE_FOURCC_YUY2 0x32595559 // 'Y' 'U' 'Y' '2'
+#define VMWARE_FOURCC_UYVY 0x59565955 // 'U' 'Y' 'V' 'Y'
+
+typedef enum {
+   SVGA_OVERLAY_FORMAT_INVALID = 0,
+   SVGA_OVERLAY_FORMAT_YV12 = VMWARE_FOURCC_YV12,
+   SVGA_OVERLAY_FORMAT_YUY2 = VMWARE_FOURCC_YUY2,
+   SVGA_OVERLAY_FORMAT_UYVY = VMWARE_FOURCC_UYVY,
+} SVGAOverlayFormat;
+
+#define SVGA_VIDEO_COLORKEY_MASK             0x00ffffff
+
+#define SVGA_ESCAPE_VMWARE_VIDEO             0x00020000
+
+#define SVGA_ESCAPE_VMWARE_VIDEO_SET_REGS    0x00020001
+        /* FIFO escape layout:
+         * Type, Stream Id, (Register Id, Value) pairs */
+
+#define SVGA_ESCAPE_VMWARE_VIDEO_FLUSH       0x00020002
+        /* FIFO escape layout:
+         * Type, Stream Id */
+
+typedef
+struct SVGAEscapeVideoSetRegs {
+   struct {
+      uint32 cmdType;
+      uint32 streamId;
+   } header;
+
+   // May include zero or more items.
+   struct {
+      uint32 registerId;
+      uint32 value;
+   } items[1];
+} SVGAEscapeVideoSetRegs;
+
+typedef
+struct SVGAEscapeVideoFlush {
+   uint32 cmdType;
+   uint32 streamId;
+} SVGAEscapeVideoFlush;
+
+
+/*
+ * Struct definitions for the video overlay commands built on
+ * SVGAFifoCmdEscape.
+ */
+typedef
+struct {
+   uint32 command;
+   uint32 overlay;
+} SVGAFifoEscapeCmdVideoBase;
+
+typedef
+struct {
+   SVGAFifoEscapeCmdVideoBase videoCmd;
+} SVGAFifoEscapeCmdVideoFlush;
+
+typedef
+struct {
+   SVGAFifoEscapeCmdVideoBase videoCmd;
+   struct {
+      uint32 regId;
+      uint32 value;
+   } items[1];
+} SVGAFifoEscapeCmdVideoSetRegs;
+
+typedef
+struct {
+   SVGAFifoEscapeCmdVideoBase videoCmd;
+   struct {
+      uint32 regId;
+      uint32 value;
+   } items[SVGA_VIDEO_NUM_REGS];
+} SVGAFifoEscapeCmdVideoSetAllRegs;
+
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * VMwareVideoGetAttributes --
+ *
+ *      Computes the size, pitches and offsets for YUV frames.
+ *
+ * Results:
+ *      TRUE on success; otherwise FALSE on failure.
+ *
+ * Side effects:
+ *      Pitches and offsets for the given YUV frame are put in 'pitches'
+ *      and 'offsets' respectively. They are both optional though.
+ *
+ *----------------------------------------------------------------------
+ */
+
+static inline bool
+VMwareVideoGetAttributes(const SVGAOverlayFormat format,    // IN
+                         uint32 *width,                     // IN / OUT
+                         uint32 *height,                    // IN / OUT
+                         uint32 *size,                      // OUT
+                         uint32 *pitches,                   // OUT (optional)
+                         uint32 *offsets)                   // OUT (optional)
+{
+    int tmp;
+
+    *width = (*width + 1) & ~1;
+
+    if (offsets) {
+        offsets[0] = 0;
+    }
+
+    switch (format) {
+    case VMWARE_FOURCC_YV12:
+       *height = (*height + 1) & ~1;
+       *size = (*width + 3) & ~3;
+
+       if (pitches) {
+          pitches[0] = *size;
+       }
+
+       *size *= *height;
+
+       if (offsets) {
+          offsets[1] = *size;
+       }
+
+       tmp = ((*width >> 1) + 3) & ~3;
+
+       if (pitches) {
+          pitches[1] = pitches[2] = tmp;
+       }
+
+       tmp *= (*height >> 1);
+       *size += tmp;
+
+       if (offsets) {
+          offsets[2] = *size;
+       }
+
+       *size += tmp;
+       break;
+
+    case VMWARE_FOURCC_YUY2:
+    case VMWARE_FOURCC_UYVY:
+       *size = *width * 2;
+
+       if (pitches) {
+          pitches[0] = *size;
+       }
+
+       *size *= *height;
+       break;
+
+    default:
+       return false;
+    }
+
+    return true;
+}
+
+#endif // _SVGA_OVERLAY_H_

drivers/gpu/drm/vmwgfx/svga_reg.h

@@ -0,0 +1,1346 @@
+/**********************************************************
+ * Copyright 1998-2009 VMware, Inc.  All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy,
+ * modify, merge, publish, distribute, sublicense, and/or sell copies
+ * of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ **********************************************************/
+
+/*
+ * svga_reg.h --
+ *
+ *    Virtual hardware definitions for the VMware SVGA II device.
+ */
+
+#ifndef _SVGA_REG_H_
+#define _SVGA_REG_H_
+
+/*
+ * PCI device IDs.
+ */
+#define PCI_VENDOR_ID_VMWARE            0x15AD
+#define PCI_DEVICE_ID_VMWARE_SVGA2      0x0405
+
+/*
+ * Legal values for the SVGA_REG_CURSOR_ON register in old-fashioned
+ * cursor bypass mode. This is still supported, but no new guest
+ * drivers should use it.
+ */
+#define SVGA_CURSOR_ON_HIDE            0x0   /* Must be 0 to maintain backward compatibility */
+#define SVGA_CURSOR_ON_SHOW            0x1   /* Must be 1 to maintain backward compatibility */
+#define SVGA_CURSOR_ON_REMOVE_FROM_FB  0x2   /* Remove the cursor from the framebuffer because we need to see what's under it */
+#define SVGA_CURSOR_ON_RESTORE_TO_FB   0x3   /* Put the cursor back in the framebuffer so the user can see it */
+
+/*
+ * The maximum framebuffer size that can traced for e.g. guests in VESA mode.
+ * The changeMap in the monitor is proportional to this number. Therefore, we'd
+ * like to keep it as small as possible to reduce monitor overhead (using
+ * SVGA_VRAM_MAX_SIZE for this increases the size of the shared area by over
+ * 4k!).
+ *
+ * NB: For compatibility reasons, this value must be greater than 0xff0000.
+ *     See bug 335072.
+ */
+#define SVGA_FB_MAX_TRACEABLE_SIZE      0x1000000
+
+#define SVGA_MAX_PSEUDOCOLOR_DEPTH      8
+#define SVGA_MAX_PSEUDOCOLORS           (1 << SVGA_MAX_PSEUDOCOLOR_DEPTH)
+#define SVGA_NUM_PALETTE_REGS           (3 * SVGA_MAX_PSEUDOCOLORS)
+
+#define SVGA_MAGIC         0x900000UL
+#define SVGA_MAKE_ID(ver)  (SVGA_MAGIC << 8 | (ver))
+
+/* Version 2 let the address of the frame buffer be unsigned on Win32 */
+#define SVGA_VERSION_2     2
+#define SVGA_ID_2          SVGA_MAKE_ID(SVGA_VERSION_2)
+
+/* Version 1 has new registers starting with SVGA_REG_CAPABILITIES so
+   PALETTE_BASE has moved */
+#define SVGA_VERSION_1     1
+#define SVGA_ID_1          SVGA_MAKE_ID(SVGA_VERSION_1)
+
+/* Version 0 is the initial version */
+#define SVGA_VERSION_0     0
+#define SVGA_ID_0          SVGA_MAKE_ID(SVGA_VERSION_0)
+
+/* "Invalid" value for all SVGA IDs. (Version ID, screen object ID, surface ID...) */
+#define SVGA_ID_INVALID    0xFFFFFFFF
+
+/* Port offsets, relative to BAR0 */
+#define SVGA_INDEX_PORT         0x0
+#define SVGA_VALUE_PORT         0x1
+#define SVGA_BIOS_PORT          0x2
+#define SVGA_IRQSTATUS_PORT     0x8
+
+/*
+ * Interrupt source flags for IRQSTATUS_PORT and IRQMASK.
+ *
+ * Interrupts are only supported when the
+ * SVGA_CAP_IRQMASK capability is present.
+ */
+#define SVGA_IRQFLAG_ANY_FENCE            0x1    /* Any fence was passed */
+#define SVGA_IRQFLAG_FIFO_PROGRESS        0x2    /* Made forward progress in the FIFO */
+#define SVGA_IRQFLAG_FENCE_GOAL           0x4    /* SVGA_FIFO_FENCE_GOAL reached */
+
+/*
+ * Registers
+ */
+
+enum {
+   SVGA_REG_ID = 0,
+   SVGA_REG_ENABLE = 1,
+   SVGA_REG_WIDTH = 2,
+   SVGA_REG_HEIGHT = 3,
+   SVGA_REG_MAX_WIDTH = 4,
+   SVGA_REG_MAX_HEIGHT = 5,
+   SVGA_REG_DEPTH = 6,
+   SVGA_REG_BITS_PER_PIXEL = 7,       /* Current bpp in the guest */
+   SVGA_REG_PSEUDOCOLOR = 8,
+   SVGA_REG_RED_MASK = 9,
+   SVGA_REG_GREEN_MASK = 10,
+   SVGA_REG_BLUE_MASK = 11,
+   SVGA_REG_BYTES_PER_LINE = 12,
+   SVGA_REG_FB_START = 13,            /* (Deprecated) */
+   SVGA_REG_FB_OFFSET = 14,
+   SVGA_REG_VRAM_SIZE = 15,
+   SVGA_REG_FB_SIZE = 16,
+
+   /* ID 0 implementation only had the above registers, then the palette */
+
+   SVGA_REG_CAPABILITIES = 17,
+   SVGA_REG_MEM_START = 18,           /* (Deprecated) */
+   SVGA_REG_MEM_SIZE = 19,
+   SVGA_REG_CONFIG_DONE = 20,         /* Set when memory area configured */
+   SVGA_REG_SYNC = 21,                /* See "FIFO Synchronization Registers" */
+   SVGA_REG_BUSY = 22,                /* See "FIFO Synchronization Registers" */
+   SVGA_REG_GUEST_ID = 23,            /* Set guest OS identifier */
+   SVGA_REG_CURSOR_ID = 24,           /* (Deprecated) */
+   SVGA_REG_CURSOR_X = 25,            /* (Deprecated) */
+   SVGA_REG_CURSOR_Y = 26,            /* (Deprecated) */
+   SVGA_REG_CURSOR_ON = 27,           /* (Deprecated) */
+   SVGA_REG_HOST_BITS_PER_PIXEL = 28, /* (Deprecated) */
+   SVGA_REG_SCRATCH_SIZE = 29,        /* Number of scratch registers */
+   SVGA_REG_MEM_REGS = 30,            /* Number of FIFO registers */
+   SVGA_REG_NUM_DISPLAYS = 31,        /* (Deprecated) */
+   SVGA_REG_PITCHLOCK = 32,           /* Fixed pitch for all modes */
+   SVGA_REG_IRQMASK = 33,             /* Interrupt mask */
+
+   /* Legacy multi-monitor support */
+   SVGA_REG_NUM_GUEST_DISPLAYS = 34,/* Number of guest displays in X/Y direction */
+   SVGA_REG_DISPLAY_ID = 35,        /* Display ID for the following display attributes */
+   SVGA_REG_DISPLAY_IS_PRIMARY = 36,/* Whether this is a primary display */
+   SVGA_REG_DISPLAY_POSITION_X = 37,/* The display position x */
+   SVGA_REG_DISPLAY_POSITION_Y = 38,/* The display position y */
+   SVGA_REG_DISPLAY_WIDTH = 39,     /* The display's width */
+   SVGA_REG_DISPLAY_HEIGHT = 40,    /* The display's height */
+
+   /* See "Guest memory regions" below. */
+   SVGA_REG_GMR_ID = 41,
+   SVGA_REG_GMR_DESCRIPTOR = 42,
+   SVGA_REG_GMR_MAX_IDS = 43,
+   SVGA_REG_GMR_MAX_DESCRIPTOR_LENGTH = 44,
+
+   SVGA_REG_TRACES = 45,            /* Enable trace-based updates even when FIFO is on */
+   SVGA_REG_TOP = 46,               /* Must be 1 more than the last register */
+
+   SVGA_PALETTE_BASE = 1024,        /* Base of SVGA color map */
+   /* Next 768 (== 256*3) registers exist for colormap */
+
+   SVGA_SCRATCH_BASE = SVGA_PALETTE_BASE + SVGA_NUM_PALETTE_REGS
+                                    /* Base of scratch registers */
+   /* Next reg[SVGA_REG_SCRATCH_SIZE] registers exist for scratch usage:
+      First 4 are reserved for VESA BIOS Extension; any remaining are for
+      the use of the current SVGA driver. */
+};
+
+
+/*
+ * Guest memory regions (GMRs):
+ *
+ * This is a new memory mapping feature available in SVGA devices
+ * which have the SVGA_CAP_GMR bit set. Previously, there were two
+ * fixed memory regions available with which to share data between the
+ * device and the driver: the FIFO ('MEM') and the framebuffer. GMRs
+ * are our name for an extensible way of providing arbitrary DMA
+ * buffers for use between the driver and the SVGA device. They are a
+ * new alternative to framebuffer memory, usable for both 2D and 3D
+ * graphics operations.
+ *
+ * Since GMR mapping must be done synchronously with guest CPU
+ * execution, we use a new pair of SVGA registers:
+ *
+ *   SVGA_REG_GMR_ID --
+ *
+ *     Read/write.
+ *     This register holds the 32-bit ID (a small positive integer)
+ *     of a GMR to create, delete, or redefine. Writing this register
+ *     has no side-effects.
+ *
+ *   SVGA_REG_GMR_DESCRIPTOR --
+ *
+ *     Write-only.
+ *     Writing this register will create, delete, or redefine the GMR
+ *     specified by the above ID register. If this register is zero,
+ *     the GMR is deleted. Any pointers into this GMR (including those
+ *     currently being processed by FIFO commands) will be
+ *     synchronously invalidated.
+ *
+ *     If this register is nonzero, it must be the physical page
+ *     number (PPN) of a data structure which describes the physical
+ *     layout of the memory region this GMR should describe. The
+ *     descriptor structure will be read synchronously by the SVGA
+ *     device when this register is written. The descriptor need not
+ *     remain allocated for the lifetime of the GMR.
+ *
+ *     The guest driver should write SVGA_REG_GMR_ID first, then
+ *     SVGA_REG_GMR_DESCRIPTOR.
+ *
+ *   SVGA_REG_GMR_MAX_IDS --
+ *
+ *     Read-only.
+ *     The SVGA device may choose to support a maximum number of
+ *     user-defined GMR IDs. This register holds the number of supported
+ *     IDs. (The maximum supported ID plus 1)
+ *
+ *   SVGA_REG_GMR_MAX_DESCRIPTOR_LENGTH --
+ *
+ *     Read-only.
+ *     The SVGA device may choose to put a limit on the total number
+ *     of SVGAGuestMemDescriptor structures it will read when defining
+ *     a single GMR.
+ *
+ * The descriptor structure is an array of SVGAGuestMemDescriptor
+ * structures. Each structure may do one of three things:
+ *
+ *   - Terminate the GMR descriptor list.
+ *     (ppn==0, numPages==0)
+ *
+ *   - Add a PPN or range of PPNs to the GMR's virtual address space.
+ *     (ppn != 0, numPages != 0)
+ *
+ *   - Provide the PPN of the next SVGAGuestMemDescriptor, in order to
+ *     support multi-page GMR descriptor tables without forcing the
+ *     driver to allocate physically contiguous memory.
+ *     (ppn != 0, numPages == 0)
+ *
+ * Note that each physical page of SVGAGuestMemDescriptor structures
+ * can describe at least 2MB of guest memory. If the driver needs to
+ * use more than one page of descriptor structures, it must use one of
+ * its SVGAGuestMemDescriptors to point to an additional page.  The
+ * device will never automatically cross a page boundary.
+ *
+ * Once the driver has described a GMR, it is immediately available
+ * for use via any FIFO command that uses an SVGAGuestPtr structure.
+ * These pointers include a GMR identifier plus an offset into that
+ * GMR.
+ *
+ * The driver must check the SVGA_CAP_GMR bit before using the GMR
+ * registers.
+ */
+
+/*
+ * Special GMR IDs, allowing SVGAGuestPtrs to point to framebuffer
+ * memory as well.  In the future, these IDs could even be used to
+ * allow legacy memory regions to be redefined by the guest as GMRs.
+ *
+ * Using the guest framebuffer (GFB) at BAR1 for general purpose DMA
+ * is being phased out. Please try to use user-defined GMRs whenever
+ * possible.
+ */
+#define SVGA_GMR_NULL         ((uint32) -1)
+#define SVGA_GMR_FRAMEBUFFER  ((uint32) -2)  // Guest Framebuffer (GFB)
+
+typedef
+struct SVGAGuestMemDescriptor {
+   uint32 ppn;
+   uint32 numPages;
+} SVGAGuestMemDescriptor;
+
+typedef
+struct SVGAGuestPtr {
+   uint32 gmrId;
+   uint32 offset;
+} SVGAGuestPtr;
+
+
+/*
+ * SVGAGMRImageFormat --
+ *
+ *    This is a packed representation of the source 2D image format
+ *    for a GMR-to-screen blit. Currently it is defined as an encoding
+ *    of the screen's color depth and bits-per-pixel, however, 16 bits
+ *    are reserved for future use to identify other encodings (such as
+ *    RGBA or higher-precision images).
+ *
+ *    Currently supported formats:
+ *
+ *       bpp depth  Format Name
+ *       --- -----  -----------
+ *        32    24  32-bit BGRX
+ *        24    24  24-bit BGR
+ *        16    16  RGB 5-6-5
+ *        16    15  RGB 5-5-5
+ *
+ */
+
+typedef
+struct SVGAGMRImageFormat {
+   union {
+      struct {
+         uint32 bitsPerPixel : 8;
+         uint32 colorDepth   : 8;
+         uint32 reserved     : 16;  // Must be zero
+      };
+
+      uint32 value;
+   };
+} SVGAGMRImageFormat;
+
+/*
+ * SVGAColorBGRX --
+ *
+ *    A 24-bit color format (BGRX), which does not depend on the
+ *    format of the legacy guest framebuffer (GFB) or the current
+ *    GMRFB state.
+ */
+
+typedef
+struct SVGAColorBGRX {
+   union {
+      struct {
+         uint32 b : 8;
+         uint32 g : 8;
+         uint32 r : 8;
+         uint32 x : 8;  // Unused
+      };
+
+      uint32 value;
+   };
+} SVGAColorBGRX;
+
+
+/*
+ * SVGASignedRect --
+ * SVGASignedPoint --
+ *
+ *    Signed rectangle and point primitives. These are used by the new
+ *    2D primitives for drawing to Screen Objects, which can occupy a
+ *    signed virtual coordinate space.
+ *
+ *    SVGASignedRect specifies a half-open interval: the (left, top)
+ *    pixel is part of the rectangle, but the (right, bottom) pixel is
+ *    not.
+ */
+
+typedef
+struct SVGASignedRect {
+   int32  left;
+   int32  top;
+   int32  right;
+   int32  bottom;
+} SVGASignedRect;
+
+typedef
+struct SVGASignedPoint {
+   int32  x;
+   int32  y;
+} SVGASignedPoint;
+
+
+/*
+ *  Capabilities
+ *
+ *  Note the holes in the bitfield. Missing bits have been deprecated,
+ *  and must not be reused. Those capabilities will never be reported
+ *  by new versions of the SVGA device.
+ */
+
+#define SVGA_CAP_NONE               0x00000000
+#define SVGA_CAP_RECT_COPY          0x00000002
+#define SVGA_CAP_CURSOR             0x00000020
+#define SVGA_CAP_CURSOR_BYPASS      0x00000040   // Legacy (Use Cursor Bypass 3 instead)
+#define SVGA_CAP_CURSOR_BYPASS_2    0x00000080   // Legacy (Use Cursor Bypass 3 instead)
+#define SVGA_CAP_8BIT_EMULATION     0x00000100
+#define SVGA_CAP_ALPHA_CURSOR       0x00000200
+#define SVGA_CAP_3D                 0x00004000
+#define SVGA_CAP_EXTENDED_FIFO      0x00008000
+#define SVGA_CAP_MULTIMON           0x00010000   // Legacy multi-monitor support
+#define SVGA_CAP_PITCHLOCK          0x00020000
+#define SVGA_CAP_IRQMASK            0x00040000
+#define SVGA_CAP_DISPLAY_TOPOLOGY   0x00080000   // Legacy multi-monitor support
+#define SVGA_CAP_GMR                0x00100000
+#define SVGA_CAP_TRACES             0x00200000
+
+
+/*
+ * FIFO register indices.
+ *
+ * The FIFO is a chunk of device memory mapped into guest physmem.  It
+ * is always treated as 32-bit words.
+ *
+ * The guest driver gets to decide how to partition it between
+ * - FIFO registers (there are always at least 4, specifying where the
+ *   following data area is and how much data it contains; there may be
+ *   more registers following these, depending on the FIFO protocol
+ *   version in use)
+ * - FIFO data, written by the guest and slurped out by the VMX.
+ * These indices are 32-bit word offsets into the FIFO.
+ */
+
+enum {
+   /*
+    * Block 1 (basic registers): The originally defined FIFO registers.
+    * These exist and are valid for all versions of the FIFO protocol.
+    */
+
+   SVGA_FIFO_MIN = 0,
+   SVGA_FIFO_MAX,       /* The distance from MIN to MAX must be at least 10K */
+   SVGA_FIFO_NEXT_CMD,
+   SVGA_FIFO_STOP,
+
+   /*
+    * Block 2 (extended registers): Mandatory registers for the extended
+    * FIFO.  These exist if the SVGA caps register includes
+    * SVGA_CAP_EXTENDED_FIFO; some of them are valid only if their
+    * associated capability bit is enabled.
+    *
+    * Note that when originally defined, SVGA_CAP_EXTENDED_FIFO implied
+    * support only for (FIFO registers) CAPABILITIES, FLAGS, and FENCE.
+    * This means that the guest has to test individually (in most cases
+    * using FIFO caps) for the presence of registers after this; the VMX
+    * can define "extended FIFO" to mean whatever it wants, and currently
+    * won't enable it unless there's room for that set and much more.
+    */
+
+   SVGA_FIFO_CAPABILITIES = 4,
+   SVGA_FIFO_FLAGS,
+   // Valid with SVGA_FIFO_CAP_FENCE:
+   SVGA_FIFO_FENCE,
+
+   /*
+    * Block 3a (optional extended registers): Additional registers for the
+    * extended FIFO, whose presence isn't actually implied by
+    * SVGA_CAP_EXTENDED_FIFO; these exist if SVGA_FIFO_MIN is high enough to
+    * leave room for them.
+    *
+    * These in block 3a, the VMX currently considers mandatory for the
+    * extended FIFO.
+    */
+
+   // Valid if exists (i.e. if extended FIFO enabled):
+   SVGA_FIFO_3D_HWVERSION,       /* See SVGA3dHardwareVersion in svga3d_reg.h */
+   // Valid with SVGA_FIFO_CAP_PITCHLOCK:
+   SVGA_FIFO_PITCHLOCK,
+
+   // Valid with SVGA_FIFO_CAP_CURSOR_BYPASS_3:
+   SVGA_FIFO_CURSOR_ON,          /* Cursor bypass 3 show/hide register */
+   SVGA_FIFO_CURSOR_X,           /* Cursor bypass 3 x register */
+   SVGA_FIFO_CURSOR_Y,           /* Cursor bypass 3 y register */
+   SVGA_FIFO_CURSOR_COUNT,       /* Incremented when any of the other 3 change */
+   SVGA_FIFO_CURSOR_LAST_UPDATED,/* Last time the host updated the cursor */
+
+   // Valid with SVGA_FIFO_CAP_RESERVE:
+   SVGA_FIFO_RESERVED,           /* Bytes past NEXT_CMD with real contents */
+
+   /*
+    * Valid with SVGA_FIFO_CAP_SCREEN_OBJECT:
+    *
+    * By default this is SVGA_ID_INVALID, to indicate that the cursor
+    * coordinates are specified relative to the virtual root. If this
+    * is set to a specific screen ID, cursor position is reinterpreted
+    * as a signed offset relative to that screen's origin. This is the
+    * only way to place the cursor on a non-rooted screen.
+    */
+   SVGA_FIFO_CURSOR_SCREEN_ID,
+
+   /*
+    * XXX: The gap here, up until SVGA_FIFO_3D_CAPS, can be used for new
+    * registers, but this must be done carefully and with judicious use of
+    * capability bits, since comparisons based on SVGA_FIFO_MIN aren't
+    * enough to tell you whether the register exists: we've shipped drivers
+    * and products that used SVGA_FIFO_3D_CAPS but didn't know about some of
+    * the earlier ones.  The actual order of introduction was:
+    * - PITCHLOCK
+    * - 3D_CAPS
+    * - CURSOR_* (cursor bypass 3)
+    * - RESERVED
+    * So, code that wants to know whether it can use any of the
+    * aforementioned registers, or anything else added after PITCHLOCK and
+    * before 3D_CAPS, needs to reason about something other than
+    * SVGA_FIFO_MIN.
+    */
+
+   /*
+    * 3D caps block space; valid with 3D hardware version >=
+    * SVGA3D_HWVERSION_WS6_B1.
+    */
+   SVGA_FIFO_3D_CAPS      = 32,
+   SVGA_FIFO_3D_CAPS_LAST = 32 + 255,
+
+   /*
+    * End of VMX's current definition of "extended-FIFO registers".
+    * Registers before here are always enabled/disabled as a block; either
+    * the extended FIFO is enabled and includes all preceding registers, or
+    * it's disabled entirely.
+    *
+    * Block 3b (truly optional extended registers): Additional registers for
+    * the extended FIFO, which the VMX already knows how to enable and
+    * disable with correct granularity.
+    *
+    * Registers after here exist if and only if the guest SVGA driver
+    * sets SVGA_FIFO_MIN high enough to leave room for them.
+    */
+
+   // Valid if register exists:
+   SVGA_FIFO_GUEST_3D_HWVERSION, /* Guest driver's 3D version */
+   SVGA_FIFO_FENCE_GOAL,         /* Matching target for SVGA_IRQFLAG_FENCE_GOAL */
+   SVGA_FIFO_BUSY,               /* See "FIFO Synchronization Registers" */
+
+   /*
+    * Always keep this last.  This defines the maximum number of
+    * registers we know about.  At power-on, this value is placed in
+    * the SVGA_REG_MEM_REGS register, and we expect the guest driver
+    * to allocate this much space in FIFO memory for registers.
+    */
+    SVGA_FIFO_NUM_REGS
+};
+
+
+/*
+ * Definition of registers included in extended FIFO support.
+ *
+ * The guest SVGA driver gets to allocate the FIFO between registers
+ * and data.  It must always allocate at least 4 registers, but old
+ * drivers stopped there.
+ *
+ * The VMX will enable extended FIFO support if and only if the guest
+ * left enough room for all registers defined as part of the mandatory
+ * set for the extended FIFO.
+ *
+ * Note that the guest drivers typically allocate the FIFO only at
+ * initialization time, not at mode switches, so it's likely that the
+ * number of FIFO registers won't change without a reboot.
+ *
+ * All registers less than this value are guaranteed to be present if
+ * svgaUser->fifo.extended is set. Any later registers must be tested
+ * individually for compatibility at each use (in the VMX).
+ *
+ * This value is used only by the VMX, so it can change without
+ * affecting driver compatibility; keep it that way?
+ */
+#define SVGA_FIFO_EXTENDED_MANDATORY_REGS  (SVGA_FIFO_3D_CAPS_LAST + 1)
+
+
+/*
+ * FIFO Synchronization Registers
+ *
+ *  This explains the relationship between the various FIFO
+ *  sync-related registers in IOSpace and in FIFO space.
+ *
+ *  SVGA_REG_SYNC --
+ *
+ *       The SYNC register can be used in two different ways by the guest:
+ *
+ *         1. If the guest wishes to fully sync (drain) the FIFO,
+ *            it will write once to SYNC then poll on the BUSY
+ *            register. The FIFO is sync'ed once BUSY is zero.
+ *
+ *         2. If the guest wants to asynchronously wake up the host,
+ *            it will write once to SYNC without polling on BUSY.
+ *            Ideally it will do this after some new commands have
+ *            been placed in the FIFO, and after reading a zero
+ *            from SVGA_FIFO_BUSY.
+ *
+ *       (1) is the original behaviour that SYNC was designed to
+ *       support.  Originally, a write to SYNC would implicitly
+ *       trigger a read from BUSY. This causes us to synchronously
+ *       process the FIFO.
+ *
+ *       This behaviour has since been changed so that writing SYNC
+ *       will *not* implicitly cause a read from BUSY. Instead, it
+ *       makes a channel call which asynchronously wakes up the MKS
+ *       thread.
+ *
+ *       New guests can use this new behaviour to implement (2)
+ *       efficiently. This lets guests get the host's attention
+ *       without waiting for the MKS to poll, which gives us much
+ *       better CPU utilization on SMP hosts and on UP hosts while
+ *       we're blocked on the host GPU.
+ *
+ *       Old guests shouldn't notice the behaviour change. SYNC was
+ *       never guaranteed to process the entire FIFO, since it was
+ *       bounded to a particular number of CPU cycles. Old guests will
+ *       still loop on the BUSY register until the FIFO is empty.
+ *
+ *       Writing to SYNC currently has the following side-effects:
+ *
+ *         - Sets SVGA_REG_BUSY to TRUE (in the monitor)
+ *         - Asynchronously wakes up the MKS thread for FIFO processing
+ *         - The value written to SYNC is recorded as a "reason", for
+ *           stats purposes.
+ *
+ *       If SVGA_FIFO_BUSY is available, drivers are advised to only
+ *       write to SYNC if SVGA_FIFO_BUSY is FALSE. Drivers should set
+ *       SVGA_FIFO_BUSY to TRUE after writing to SYNC. The MKS will
+ *       eventually set SVGA_FIFO_BUSY on its own, but this approach
+ *       lets the driver avoid sending multiple asynchronous wakeup
+ *       messages to the MKS thread.
+ *
+ *  SVGA_REG_BUSY --
+ *
+ *       This register is set to TRUE when SVGA_REG_SYNC is written,
+ *       and it reads as FALSE when the FIFO has been completely
+ *       drained.
+ *
+ *       Every read from this register causes us to synchronously
+ *       process FIFO commands. There is no guarantee as to how many
+ *       commands each read will process.
+ *
+ *       CPU time spent processing FIFO commands will be billed to
+ *       the guest.
+ *
+ *       New drivers should avoid using this register unless they
+ *       need to guarantee that the FIFO is completely drained. It
+ *       is overkill for performing a sync-to-fence. Older drivers
+ *       will use this register for any type of synchronization.
+ *
+ *  SVGA_FIFO_BUSY --
+ *
+ *       This register is a fast way for the guest driver to check
+ *       whether the FIFO is already being processed. It reads and
+ *       writes at normal RAM speeds, with no monitor intervention.
+ *
+ *       If this register reads as TRUE, the host is guaranteeing that
+ *       any new commands written into the FIFO will be noticed before
+ *       the MKS goes back to sleep.
+ *
+ *       If this register reads as FALSE, no such guarantee can be
+ *       made.
+ *
+ *       The guest should use this register to quickly determine
+ *       whether or not it needs to wake up the host. If the guest
+ *       just wrote a command or group of commands that it would like
+ *       the host to begin processing, it should:
+ *
+ *         1. Read SVGA_FIFO_BUSY. If it reads as TRUE, no further
+ *            action is necessary.
+ *
+ *         2. Write TRUE to SVGA_FIFO_BUSY. This informs future guest
+ *            code that we've already sent a SYNC to the host and we
+ *            don't need to send a duplicate.
+ *
+ *         3. Write a reason to SVGA_REG_SYNC. This will send an
+ *            asynchronous wakeup to the MKS thread.
+ */
+
+
+/*
+ * FIFO Capabilities
+ *
+ *      Fence -- Fence register and command are supported
+ *      Accel Front -- Front buffer only commands are supported
+ *      Pitch Lock -- Pitch lock register is supported
+ *      Video -- SVGA Video overlay units are supported
+ *      Escape -- Escape command is supported
+ *
+ * XXX: Add longer descriptions for each capability, including a list
+ *      of the new features that each capability provides.
+ *
+ * SVGA_FIFO_CAP_SCREEN_OBJECT --
+ *
+ *    Provides dynamic multi-screen rendering, for improved Unity and
+ *    multi-monitor modes. With Screen Object, the guest can
+ *    dynamically create and destroy 'screens', which can represent
+ *    Unity windows or virtual monitors. Screen Object also provides
+ *    strong guarantees that DMA operations happen only when
+ *    guest-initiated. Screen Object deprecates the BAR1 guest
+ *    framebuffer (GFB) and all commands that work only with the GFB.
+ *
+ *    New registers:
+ *       FIFO_CURSOR_SCREEN_ID, VIDEO_DATA_GMRID, VIDEO_DST_SCREEN_ID
+ *
+ *    New 2D commands:
+ *       DEFINE_SCREEN, DESTROY_SCREEN, DEFINE_GMRFB, BLIT_GMRFB_TO_SCREEN,
+ *       BLIT_SCREEN_TO_GMRFB, ANNOTATION_FILL, ANNOTATION_COPY
+ *
+ *    New 3D commands:
+ *       BLIT_SURFACE_TO_SCREEN
+ *
+ *    New guarantees:
+ *
+ *       - The host will not read or write guest memory, including the GFB,
+ *         except when explicitly initiated by a DMA command.
+ *
+ *       - All DMA, including legacy DMA like UPDATE and PRESENT_READBACK,
+ *         is guaranteed to complete before any subsequent FENCEs.
+ *
+ *       - All legacy commands which affect a Screen (UPDATE, PRESENT,
+ *         PRESENT_READBACK) as well as new Screen blit commands will
+ *         all behave consistently as blits, and memory will be read
+ *         or written in FIFO order.
+ *
+ *         For example, if you PRESENT from one SVGA3D surface to multiple
+ *         places on the screen, the data copied will always be from the
+ *         SVGA3D surface at the time the PRESENT was issued in the FIFO.
+ *         This was not necessarily true on devices without Screen Object.
+ *
+ *         This means that on devices that support Screen Object, the
+ *         PRESENT_READBACK command should not be necessary unless you
+ *         actually want to read back the results of 3D rendering into
+ *         system memory. (And for that, the BLIT_SCREEN_TO_GMRFB
+ *         command provides a strict superset of functionality.)
+ *
+ *       - When a screen is resized, either using Screen Object commands or
+ *         legacy multimon registers, its contents are preserved.
+ */
+
+#define SVGA_FIFO_CAP_NONE                  0
+#define SVGA_FIFO_CAP_FENCE             (1<<0)
+#define SVGA_FIFO_CAP_ACCELFRONT        (1<<1)
+#define SVGA_FIFO_CAP_PITCHLOCK         (1<<2)
+#define SVGA_FIFO_CAP_VIDEO             (1<<3)
+#define SVGA_FIFO_CAP_CURSOR_BYPASS_3   (1<<4)
+#define SVGA_FIFO_CAP_ESCAPE            (1<<5)
+#define SVGA_FIFO_CAP_RESERVE           (1<<6)
+#define SVGA_FIFO_CAP_SCREEN_OBJECT     (1<<7)
+
+
+/*
+ * FIFO Flags
+ *
+ *      Accel Front -- Driver should use front buffer only commands
+ */
+
+#define SVGA_FIFO_FLAG_NONE                 0
+#define SVGA_FIFO_FLAG_ACCELFRONT       (1<<0)
+#define SVGA_FIFO_FLAG_RESERVED        (1<<31) // Internal use only
+
+/*
+ * FIFO reservation sentinel value
+ */
+
+#define SVGA_FIFO_RESERVED_UNKNOWN      0xffffffff
+
+
+/*
+ * Video overlay support
+ */
+
+#define SVGA_NUM_OVERLAY_UNITS 32
+
+
+/*
+ * Video capabilities that the guest is currently using
+ */
+
+#define SVGA_VIDEO_FLAG_COLORKEY        0x0001
+
+
+/*
+ * Offsets for the video overlay registers
+ */
+
+enum {
+   SVGA_VIDEO_ENABLED = 0,
+   SVGA_VIDEO_FLAGS,
+   SVGA_VIDEO_DATA_OFFSET,
+   SVGA_VIDEO_FORMAT,
+   SVGA_VIDEO_COLORKEY,
+   SVGA_VIDEO_SIZE,          // Deprecated
+   SVGA_VIDEO_WIDTH,
+   SVGA_VIDEO_HEIGHT,
+   SVGA_VIDEO_SRC_X,
+   SVGA_VIDEO_SRC_Y,
+   SVGA_VIDEO_SRC_WIDTH,
+   SVGA_VIDEO_SRC_HEIGHT,
+   SVGA_VIDEO_DST_X,         // Signed int32
+   SVGA_VIDEO_DST_Y,         // Signed int32
+   SVGA_VIDEO_DST_WIDTH,
+   SVGA_VIDEO_DST_HEIGHT,
+   SVGA_VIDEO_PITCH_1,
+   SVGA_VIDEO_PITCH_2,
+   SVGA_VIDEO_PITCH_3,
+   SVGA_VIDEO_DATA_GMRID,    // Optional, defaults to SVGA_GMR_FRAMEBUFFER
+   SVGA_VIDEO_DST_SCREEN_ID, // Optional, defaults to virtual coords (SVGA_ID_INVALID)
+   SVGA_VIDEO_NUM_REGS
+};
+
+
+/*
+ * SVGA Overlay Units
+ *
+ *      width and height relate to the entire source video frame.
+ *      srcX, srcY, srcWidth and srcHeight represent subset of the source
+ *      video frame to be displayed.
+ */
+
+typedef struct SVGAOverlayUnit {
+   uint32 enabled;
+   uint32 flags;
+   uint32 dataOffset;
+   uint32 format;
+   uint32 colorKey;
+   uint32 size;
+   uint32 width;
+   uint32 height;
+   uint32 srcX;
+   uint32 srcY;
+   uint32 srcWidth;
+   uint32 srcHeight;
+   int32  dstX;
+   int32  dstY;
+   uint32 dstWidth;
+   uint32 dstHeight;
+   uint32 pitches[3];
+   uint32 dataGMRId;
+   uint32 dstScreenId;
+} SVGAOverlayUnit;
+
+
+/*
+ * SVGAScreenObject --
+ *
+ *    This is a new way to represent a guest's multi-monitor screen or
+ *    Unity window. Screen objects are only supported if the
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT capability bit is set.
+ *
+ *    If Screen Objects are supported, they can be used to fully
+ *    replace the functionality provided by the framebuffer registers
+ *    (SVGA_REG_WIDTH, HEIGHT, etc.) and by SVGA_CAP_DISPLAY_TOPOLOGY.
+ *
+ *    The screen object is a struct with guaranteed binary
+ *    compatibility. New flags can be added, and the struct may grow,
+ *    but existing fields must retain their meaning.
+ *
+ */
+
+#define SVGA_SCREEN_HAS_ROOT    (1 << 0)  // Screen is present in the virtual coord space
+#define SVGA_SCREEN_IS_PRIMARY  (1 << 1)  // Guest considers this screen to be 'primary'
+#define SVGA_SCREEN_FULLSCREEN_HINT (1 << 2)   // Guest is running a fullscreen app here
+
+typedef
+struct SVGAScreenObject {
+   uint32 structSize;   // sizeof(SVGAScreenObject)
+   uint32 id;
+   uint32 flags;
+   struct {
+      uint32 width;
+      uint32 height;
+   } size;
+   struct {
+      int32 x;
+      int32 y;
+   } root;              // Only used if SVGA_SCREEN_HAS_ROOT is set.
+} SVGAScreenObject;
+
+
+/*
+ *  Commands in the command FIFO:
+ *
+ *  Command IDs defined below are used for the traditional 2D FIFO
+ *  communication (not all commands are available for all versions of the
+ *  SVGA FIFO protocol).
+ *
+ *  Note the holes in the command ID numbers: These commands have been
+ *  deprecated, and the old IDs must not be reused.
+ *
+ *  Command IDs from 1000 to 1999 are reserved for use by the SVGA3D
+ *  protocol.
+ *
+ *  Each command's parameters are described by the comments and
+ *  structs below.
+ */
+
+typedef enum {
+   SVGA_CMD_INVALID_CMD           = 0,
+   SVGA_CMD_UPDATE                = 1,
+   SVGA_CMD_RECT_COPY             = 3,
+   SVGA_CMD_DEFINE_CURSOR         = 19,
+   SVGA_CMD_DEFINE_ALPHA_CURSOR   = 22,
+   SVGA_CMD_UPDATE_VERBOSE        = 25,
+   SVGA_CMD_FRONT_ROP_FILL        = 29,
+   SVGA_CMD_FENCE                 = 30,
+   SVGA_CMD_ESCAPE                = 33,
+   SVGA_CMD_DEFINE_SCREEN         = 34,
+   SVGA_CMD_DESTROY_SCREEN        = 35,
+   SVGA_CMD_DEFINE_GMRFB          = 36,
+   SVGA_CMD_BLIT_GMRFB_TO_SCREEN  = 37,
+   SVGA_CMD_BLIT_SCREEN_TO_GMRFB  = 38,
+   SVGA_CMD_ANNOTATION_FILL       = 39,
+   SVGA_CMD_ANNOTATION_COPY       = 40,
+   SVGA_CMD_MAX
+} SVGAFifoCmdId;
+
+#define SVGA_CMD_MAX_ARGS           64
+
+
+/*
+ * SVGA_CMD_UPDATE --
+ *
+ *    This is a DMA transfer which copies from the Guest Framebuffer
+ *    (GFB) at BAR1 + SVGA_REG_FB_OFFSET to any screens which
+ *    intersect with the provided virtual rectangle.
+ *
+ *    This command does not support using arbitrary guest memory as a
+ *    data source- it only works with the pre-defined GFB memory.
+ *    This command also does not support signed virtual coordinates.
+ *    If you have defined screens (using SVGA_CMD_DEFINE_SCREEN) with
+ *    negative root x/y coordinates, the negative portion of those
+ *    screens will not be reachable by this command.
+ *
+ *    This command is not necessary when using framebuffer
+ *    traces. Traces are automatically enabled if the SVGA FIFO is
+ *    disabled, and you may explicitly enable/disable traces using
+ *    SVGA_REG_TRACES. With traces enabled, any write to the GFB will
+ *    automatically act as if a subsequent SVGA_CMD_UPDATE was issued.
+ *
+ *    Traces and SVGA_CMD_UPDATE are the only supported ways to render
+ *    pseudocolor screen updates. The newer Screen Object commands
+ *    only support true color formats.
+ *
+ * Availability:
+ *    Always available.
+ */
+
+typedef
+struct {
+   uint32 x;
+   uint32 y;
+   uint32 width;
+   uint32 height;
+} SVGAFifoCmdUpdate;
+
+
+/*
+ * SVGA_CMD_RECT_COPY --
+ *
+ *    Perform a rectangular DMA transfer from one area of the GFB to
+ *    another, and copy the result to any screens which intersect it.
+ *
+ * Availability:
+ *    SVGA_CAP_RECT_COPY
+ */
+
+typedef
+struct {
+   uint32 srcX;
+   uint32 srcY;
+   uint32 destX;
+   uint32 destY;
+   uint32 width;
+   uint32 height;
+} SVGAFifoCmdRectCopy;
+
+
+/*
+ * SVGA_CMD_DEFINE_CURSOR --
+ *
+ *    Provide a new cursor image, as an AND/XOR mask.
+ *
+ *    The recommended way to position the cursor overlay is by using
+ *    the SVGA_FIFO_CURSOR_* registers, supported by the
+ *    SVGA_FIFO_CAP_CURSOR_BYPASS_3 capability.
+ *
+ * Availability:
+ *    SVGA_CAP_CURSOR
+ */
+
+typedef
+struct {
+   uint32 id;             // Reserved, must be zero.
+   uint32 hotspotX;
+   uint32 hotspotY;
+   uint32 width;
+   uint32 height;
+   uint32 andMaskDepth;   // Value must be 1 or equal to BITS_PER_PIXEL
+   uint32 xorMaskDepth;   // Value must be 1 or equal to BITS_PER_PIXEL
+   /*
+    * Followed by scanline data for AND mask, then XOR mask.
+    * Each scanline is padded to a 32-bit boundary.
+   */
+} SVGAFifoCmdDefineCursor;
+
+
+/*
+ * SVGA_CMD_DEFINE_ALPHA_CURSOR --
+ *
+ *    Provide a new cursor image, in 32-bit BGRA format.
+ *
+ *    The recommended way to position the cursor overlay is by using
+ *    the SVGA_FIFO_CURSOR_* registers, supported by the
+ *    SVGA_FIFO_CAP_CURSOR_BYPASS_3 capability.
+ *
+ * Availability:
+ *    SVGA_CAP_ALPHA_CURSOR
+ */
+
+typedef
+struct {
+   uint32 id;             // Reserved, must be zero.
+   uint32 hotspotX;
+   uint32 hotspotY;
+   uint32 width;
+   uint32 height;
+   /* Followed by scanline data */
+} SVGAFifoCmdDefineAlphaCursor;
+
+
+/*
+ * SVGA_CMD_UPDATE_VERBOSE --
+ *
+ *    Just like SVGA_CMD_UPDATE, but also provide a per-rectangle
+ *    'reason' value, an opaque cookie which is used by internal
+ *    debugging tools. Third party drivers should not use this
+ *    command.
+ *
+ * Availability:
+ *    SVGA_CAP_EXTENDED_FIFO
+ */
+
+typedef
+struct {
+   uint32 x;
+   uint32 y;
+   uint32 width;
+   uint32 height;
+   uint32 reason;
+} SVGAFifoCmdUpdateVerbose;
+
+
+/*
+ * SVGA_CMD_FRONT_ROP_FILL --
+ *
+ *    This is a hint which tells the SVGA device that the driver has
+ *    just filled a rectangular region of the GFB with a solid
+ *    color. Instead of reading these pixels from the GFB, the device
+ *    can assume that they all equal 'color'. This is primarily used
+ *    for remote desktop protocols.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_ACCELFRONT
+ */
+
+#define  SVGA_ROP_COPY                    0x03
+
+typedef
+struct {
+   uint32 color;     // In the same format as the GFB
+   uint32 x;
+   uint32 y;
+   uint32 width;
+   uint32 height;
+   uint32 rop;       // Must be SVGA_ROP_COPY
+} SVGAFifoCmdFrontRopFill;
+
+
+/*
+ * SVGA_CMD_FENCE --
+ *
+ *    Insert a synchronization fence.  When the SVGA device reaches
+ *    this command, it will copy the 'fence' value into the
+ *    SVGA_FIFO_FENCE register. It will also compare the fence against
+ *    SVGA_FIFO_FENCE_GOAL. If the fence matches the goal and the
+ *    SVGA_IRQFLAG_FENCE_GOAL interrupt is enabled, the device will
+ *    raise this interrupt.
+ *
+ * Availability:
+ *    SVGA_FIFO_FENCE for this command,
+ *    SVGA_CAP_IRQMASK for SVGA_FIFO_FENCE_GOAL.
+ */
+
+typedef
+struct {
+   uint32 fence;
+} SVGAFifoCmdFence;
+
+
+/*
+ * SVGA_CMD_ESCAPE --
+ *
+ *    Send an extended or vendor-specific variable length command.
+ *    This is used for video overlay, third party plugins, and
+ *    internal debugging tools. See svga_escape.h
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_ESCAPE
+ */
+
+typedef
+struct {
+   uint32 nsid;
+   uint32 size;
+   /* followed by 'size' bytes of data */
+} SVGAFifoCmdEscape;
+
+
+/*
+ * SVGA_CMD_DEFINE_SCREEN --
+ *
+ *    Define or redefine an SVGAScreenObject. See the description of
+ *    SVGAScreenObject above.  The video driver is responsible for
+ *    generating new screen IDs. They should be small positive
+ *    integers. The virtual device will have an implementation
+ *    specific upper limit on the number of screen IDs
+ *    supported. Drivers are responsible for recycling IDs. The first
+ *    valid ID is zero.
+ *
+ *    - Interaction with other registers:
+ *
+ *    For backwards compatibility, when the GFB mode registers (WIDTH,
+ *    HEIGHT, PITCHLOCK, BITS_PER_PIXEL) are modified, the SVGA device
+ *    deletes all screens other than screen #0, and redefines screen
+ *    #0 according to the specified mode. Drivers that use
+ *    SVGA_CMD_DEFINE_SCREEN should destroy or redefine screen #0.
+ *
+ *    If you use screen objects, do not use the legacy multi-mon
+ *    registers (SVGA_REG_NUM_GUEST_DISPLAYS, SVGA_REG_DISPLAY_*).
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT
+ */
+
+typedef
+struct {
+   SVGAScreenObject screen;   // Variable-length according to version
+} SVGAFifoCmdDefineScreen;
+
+
+/*
+ * SVGA_CMD_DESTROY_SCREEN --
+ *
+ *    Destroy an SVGAScreenObject. Its ID is immediately available for
+ *    re-use.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT
+ */
+
+typedef
+struct {
+   uint32 screenId;
+} SVGAFifoCmdDestroyScreen;
+
+
+/*
+ * SVGA_CMD_DEFINE_GMRFB --
+ *
+ *    This command sets a piece of SVGA device state called the
+ *    Guest Memory Region Framebuffer, or GMRFB. The GMRFB is a
+ *    piece of light-weight state which identifies the location and
+ *    format of an image in guest memory or in BAR1. The GMRFB has
+ *    an arbitrary size, and it doesn't need to match the geometry
+ *    of the GFB or any screen object.
+ *
+ *    The GMRFB can be redefined as often as you like. You could
+ *    always use the same GMRFB, you could redefine it before
+ *    rendering from a different guest screen, or you could even
+ *    redefine it before every blit.
+ *
+ *    There are multiple ways to use this command. The simplest way is
+ *    to use it to move the framebuffer either to elsewhere in the GFB
+ *    (BAR1) memory region, or to a user-defined GMR. This lets a
+ *    driver use a framebuffer allocated entirely out of normal system
+ *    memory, which we encourage.
+ *
+ *    Another way to use this command is to set up a ring buffer of
+ *    updates in GFB memory. If a driver wants to ensure that no
+ *    frames are skipped by the SVGA device, it is important that the
+ *    driver not modify the source data for a blit until the device is
+ *    done processing the command. One efficient way to accomplish
+ *    this is to use a ring of small DMA buffers. Each buffer is used
+ *    for one blit, then we move on to the next buffer in the
+ *    ring. The FENCE mechanism is used to protect each buffer from
+ *    re-use until the device is finished with that buffer's
+ *    corresponding blit.
+ *
+ *    This command does not affect the meaning of SVGA_CMD_UPDATE.
+ *    UPDATEs always occur from the legacy GFB memory area. This
+ *    command has no support for pseudocolor GMRFBs. Currently only
+ *    true-color 15, 16, and 24-bit depths are supported. Future
+ *    devices may expose capabilities for additional framebuffer
+ *    formats.
+ *
+ *    The default GMRFB value is undefined. Drivers must always send
+ *    this command at least once before performing any blit from the
+ *    GMRFB.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT
+ */
+
+typedef
+struct {
+   SVGAGuestPtr        ptr;
+   uint32              bytesPerLine;
+   SVGAGMRImageFormat  format;
+} SVGAFifoCmdDefineGMRFB;
+
+
+/*
+ * SVGA_CMD_BLIT_GMRFB_TO_SCREEN --
+ *
+ *    This is a guest-to-host blit. It performs a DMA operation to
+ *    copy a rectangular region of pixels from the current GMRFB to
+ *    one or more Screen Objects.
+ *
+ *    The destination coordinate may be specified relative to a
+ *    screen's origin (if a screen ID is specified) or relative to the
+ *    virtual coordinate system's origin (if the screen ID is
+ *    SVGA_ID_INVALID). The actual destination may span zero or more
+ *    screens, in the case of a virtual destination rect or a rect
+ *    which extends off the edge of the specified screen.
+ *
+ *    This command writes to the screen's "base layer": the underlying
+ *    framebuffer which exists below any cursor or video overlays. No
+ *    action is necessary to explicitly hide or update any overlays
+ *    which exist on top of the updated region.
+ *
+ *    The SVGA device is guaranteed to finish reading from the GMRFB
+ *    by the time any subsequent FENCE commands are reached.
+ *
+ *    This command consumes an annotation. See the
+ *    SVGA_CMD_ANNOTATION_* commands for details.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT
+ */
+
+typedef
+struct {
+   SVGASignedPoint  srcOrigin;
+   SVGASignedRect   destRect;
+   uint32           destScreenId;
+} SVGAFifoCmdBlitGMRFBToScreen;
+
+
+/*
+ * SVGA_CMD_BLIT_SCREEN_TO_GMRFB --
+ *
+ *    This is a host-to-guest blit. It performs a DMA operation to
+ *    copy a rectangular region of pixels from a single Screen Object
+ *    back to the current GMRFB.
+ *
+ *    Usage note: This command should be used rarely. It will
+ *    typically be inefficient, but it is necessary for some types of
+ *    synchronization between 3D (GPU) and 2D (CPU) rendering into
+ *    overlapping areas of a screen.
+ *
+ *    The source coordinate is specified relative to a screen's
+ *    origin. The provided screen ID must be valid. If any parameters
+ *    are invalid, the resulting pixel values are undefined.
+ *
+ *    This command reads the screen's "base layer". Overlays like
+ *    video and cursor are not included, but any data which was sent
+ *    using a blit-to-screen primitive will be available, no matter
+ *    whether the data's original source was the GMRFB or the 3D
+ *    acceleration hardware.
+ *
+ *    Note that our guest-to-host blits and host-to-guest blits aren't
+ *    symmetric in their current implementation. While the parameters
+ *    are identical, host-to-guest blits are a lot less featureful.
+ *    They do not support clipping: If the source parameters don't
+ *    fully fit within a screen, the blit fails. They must originate
+ *    from exactly one screen. Virtual coordinates are not directly
+ *    supported.
+ *
+ *    Host-to-guest blits do support the same set of GMRFB formats
+ *    offered by guest-to-host blits.
+ *
+ *    The SVGA device is guaranteed to finish writing to the GMRFB by
+ *    the time any subsequent FENCE commands are reached.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT
+ */
+
+typedef
+struct {
+   SVGASignedPoint  destOrigin;
+   SVGASignedRect   srcRect;
+   uint32           srcScreenId;
+} SVGAFifoCmdBlitScreenToGMRFB;
+
+
+/*
+ * SVGA_CMD_ANNOTATION_FILL --
+ *
+ *    This is a blit annotation. This command stores a small piece of
+ *    device state which is consumed by the next blit-to-screen
+ *    command. The state is only cleared by commands which are
+ *    specifically documented as consuming an annotation. Other
+ *    commands (such as ESCAPEs for debugging) may intervene between
+ *    the annotation and its associated blit.
+ *
+ *    This annotation is a promise about the contents of the next
+ *    blit: The video driver is guaranteeing that all pixels in that
+ *    blit will have the same value, specified here as a color in
+ *    SVGAColorBGRX format.
+ *
+ *    The SVGA device can still render the blit correctly even if it
+ *    ignores this annotation, but the annotation may allow it to
+ *    perform the blit more efficiently, for example by ignoring the
+ *    source data and performing a fill in hardware.
+ *
+ *    This annotation is most important for performance when the
+ *    user's display is being remoted over a network connection.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT
+ */
+
+typedef
+struct {
+   SVGAColorBGRX  color;
+} SVGAFifoCmdAnnotationFill;
+
+
+/*
+ * SVGA_CMD_ANNOTATION_COPY --
+ *
+ *    This is a blit annotation. See SVGA_CMD_ANNOTATION_FILL for more
+ *    information about annotations.
+ *
+ *    This annotation is a promise about the contents of the next
+ *    blit: The video driver is guaranteeing that all pixels in that
+ *    blit will have the same value as those which already exist at an
+ *    identically-sized region on the same or a different screen.
+ *
+ *    Note that the source pixels for the COPY in this annotation are
+ *    sampled before applying the anqnotation's associated blit. They
+ *    are allowed to overlap with the blit's destination pixels.
+ *
+ *    The copy source rectangle is specified the same way as the blit
+ *    destination: it can be a rectangle which spans zero or more
+ *    screens, specified relative to either a screen or to the virtual
+ *    coordinate system's origin. If the source rectangle includes
+ *    pixels which are not from exactly one screen, the results are
+ *    undefined.
+ *
+ * Availability:
+ *    SVGA_FIFO_CAP_SCREEN_OBJECT
+ */
+
+typedef
+struct {
+   SVGASignedPoint  srcOrigin;
+   uint32           srcScreenId;
+} SVGAFifoCmdAnnotationCopy;
+
+#endif

drivers/gpu/drm/vmwgfx/svga_types.h

@@ -0,0 +1,45 @@
+/**************************************************************************
+ *
+ * Copyright © 2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+/**
+ * Silly typedefs for the svga headers. Currently the headers are shared
+ * between all components that talk to svga. And as such the headers are
+ * are in a completely different style and use weird defines.
+ *
+ * This file lets all the ugly be prefixed with svga*.
+ */
+
+#ifndef _SVGA_TYPES_H_
+#define _SVGA_TYPES_H_
+
+typedef uint16_t uint16;
+typedef uint32_t uint32;
+typedef uint8_t uint8;
+typedef int32_t int32;
+typedef bool Bool;
+
+#endif