Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6

Pull MTD changes from David Woodhouse:
 - Artem's cleanup of the MTD API continues apace.
 - Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst
   others.
 - More work on DiskOnChip G3, new driver for DiskOnChip G4.
 - Clean up debug/warning printks in JFFS2 to use pr_<level>.

Fix up various trivial conflicts, largely due to changes in calling
conventions for things like dmaengine_prep_slave_sg() (new inline
wrapper to hide new parameter, clashing with rewrite of previously last
parameter that used to be an 'append' flag, and is now a bitmap of
'unsigned long flags').

(Also some header file fallout - like so many merges this merge window -
and silly conflicts with sparse fixes)

* tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits)
  mtd: docg3 add protection against concurrency
  mtd: docg3 refactor cascade floors structure
  mtd: docg3 increase write/erase timeout
  mtd: docg3 fix inbound calculations
  mtd: nand: gpmi: fix function annotations
  mtd: phram: fix section mismatch for phram_setup
  mtd: unify initialization of erase_info->fail_addr
  mtd: support ONFI multi lun NAND
  mtd: sm_ftl: fix typo in major number.
  mtd: add device-tree support to spear_smi
  mtd: spear_smi: Remove default partition information from driver
  mtd: Add device-tree support to fsmc_nand
  mtd: fix section mismatch for doc_probe_device
  mtd: nand/fsmc: Remove sparse warnings and errors
  mtd: nand/fsmc: Add DMA support
  mtd: nand/fsmc: Access the NAND device word by word whenever possible
  mtd: nand/fsmc: Use dev_err to report error scenario
  mtd: nand/fsmc: Use devm routines
  mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform
  mtd: fsmc_nand: add pm callbacks to support hibernation
  ...

Documentation/devicetree/bindings/mtd/fsmc-nand.txt

@@ -0,0 +1,33 @@
+* FSMC NAND
+
+Required properties:
+- compatible : "st,spear600-fsmc-nand"
+- reg : Address range of the mtd chip
+- reg-names: Should contain the reg names "fsmc_regs" and "nand_data"
+- st,ale-off : Chip specific offset to ALE
+- st,cle-off : Chip specific offset to CLE
+
+Optional properties:
+- bank-width : Width (in bytes) of the device.  If not present, the width
+  defaults to 1 byte
+- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+
+Example:
+
+	fsmc: flash@d1800000 {
+		compatible = "st,spear600-fsmc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xd1800000 0x1000	/* FSMC Register */
+		       0xd2000000 0x4000>;	/* NAND Base */
+		reg-names = "fsmc_regs", "nand_data";
+		st,ale-off = <0x20000>;
+		st,cle-off = <0x10000>;
+
+		bank-width = <1>;
+		nand-skip-bbtscan;
+
+		partition@0 {
+			...
+		};
+	};

Documentation/devicetree/bindings/mtd/spear_smi.txt

@@ -0,0 +1,31 @@
+* SPEAr SMI
+
+Required properties:
+- compatible : "st,spear600-smi"
+- reg : Address range of the mtd chip
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the STMMAC interrupts
+- clock-rate : Functional clock rate of SMI in Hz
+
+Optional properties:
+- st,smi-fast-mode : Flash supports read in fast mode
+
+Example:
+
+	smi: flash@fc000000 {
+		compatible = "st,spear600-smi";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xfc000000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <12>;
+		clock-rate = <50000000>;	/* 50MHz */
+
+		flash@f8000000 {
+			st,smi-fast-mode;
+			...
+		};
+	};

arch/arm/mach-omap1/flash.c

@@ -17,20 +17,12 @@
 
 void omap1_set_vpp(struct platform_device *pdev, int enable)
 {
-	static int count;
 	u32 l;
 
-	if (enable) {
-		if (count++ == 0) {
-			l = omap_readl(EMIFS_CONFIG);
-			l |= OMAP_EMIFS_CONFIG_WP;
-			omap_writel(l, EMIFS_CONFIG);
-		}
-	} else {
-		if (count && (--count == 0)) {
-			l = omap_readl(EMIFS_CONFIG);
-			l &= ~OMAP_EMIFS_CONFIG_WP;
-			omap_writel(l, EMIFS_CONFIG);
-		}
-	}
+	l = omap_readl(EMIFS_CONFIG);
+	if (enable)
+		l |= OMAP_EMIFS_CONFIG_WP;
+	else
+		l &= ~OMAP_EMIFS_CONFIG_WP;
+	omap_writel(l, EMIFS_CONFIG);
 }

arch/arm/mach-s3c24xx/simtec-nor.c

@@ -35,9 +35,7 @@
 static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
 {
 	unsigned int val;
-	unsigned long flags;
 
-	local_irq_save(flags);
 	val = __raw_readb(BAST_VA_CTRL3);
 
 	printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
@@ -48,7 +46,6 @@ static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
 		val &= ~BAST_CPLD_CTRL3_ROMWEN;
 
 	__raw_writeb(val, BAST_VA_CTRL3);
-	local_irq_restore(flags);
 }
 
 static struct physmap_flash_data simtec_nor_pdata = {

arch/arm/mach-shmobile/board-mackerel.c

@@ -39,6 +39,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/sh_flctl.h>
 #include <linux/pm_clock.h>
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
@@ -956,6 +957,50 @@ static struct platform_device fsi_ak4643_device = {
 	},
 };
 
+/* FLCTL */
+static struct mtd_partition nand_partition_info[] = {
+	{
+		.name	= "system",
+		.offset	= 0,
+		.size	= 128 * 1024 * 1024,
+	},
+	{
+		.name	= "userdata",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 256 * 1024 * 1024,
+	},
+	{
+		.name	= "cache",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 128 * 1024 * 1024,
+	},
+};
+
+static struct resource nand_flash_resources[] = {
+	[0] = {
+		.start	= 0xe6a30000,
+		.end	= 0xe6a3009b,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct sh_flctl_platform_data nand_flash_data = {
+	.parts		= nand_partition_info,
+	.nr_parts	= ARRAY_SIZE(nand_partition_info),
+	.flcmncr_val	= CLK_16B_12L_4H | TYPESEL_SET
+			| SHBUSSEL | SEL_16BIT | SNAND_E,
+	.use_holden	= 1,
+};
+
+static struct platform_device nand_flash_device = {
+	.name		= "sh_flctl",
+	.resource	= nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(nand_flash_resources),
+	.dev		= {
+		.platform_data = &nand_flash_data,
+	},
+};
+
 /*
  * The card detect pin of the top SD/MMC slot (CN7) is active low and is
  * connected to GPIO A22 of SH7372 (GPIO_PORT41).
@@ -1259,6 +1304,7 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&fsi_device,
 	&fsi_ak4643_device,
 	&fsi_hdmi_device,
+	&nand_flash_device,
 	&sdhi0_device,
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 	&sdhi1_device,
@@ -1488,6 +1534,30 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_MMCCMD0, NULL);
 	gpio_request(GPIO_FN_MMCCLK0, NULL);
 
+	/* FLCTL */
+	gpio_request(GPIO_FN_D0_NAF0, NULL);
+	gpio_request(GPIO_FN_D1_NAF1, NULL);
+	gpio_request(GPIO_FN_D2_NAF2, NULL);
+	gpio_request(GPIO_FN_D3_NAF3, NULL);
+	gpio_request(GPIO_FN_D4_NAF4, NULL);
+	gpio_request(GPIO_FN_D5_NAF5, NULL);
+	gpio_request(GPIO_FN_D6_NAF6, NULL);
+	gpio_request(GPIO_FN_D7_NAF7, NULL);
+	gpio_request(GPIO_FN_D8_NAF8, NULL);
+	gpio_request(GPIO_FN_D9_NAF9, NULL);
+	gpio_request(GPIO_FN_D10_NAF10, NULL);
+	gpio_request(GPIO_FN_D11_NAF11, NULL);
+	gpio_request(GPIO_FN_D12_NAF12, NULL);
+	gpio_request(GPIO_FN_D13_NAF13, NULL);
+	gpio_request(GPIO_FN_D14_NAF14, NULL);
+	gpio_request(GPIO_FN_D15_NAF15, NULL);
+	gpio_request(GPIO_FN_FCE0, NULL);
+	gpio_request(GPIO_FN_WE0_FWE, NULL);
+	gpio_request(GPIO_FN_FRB, NULL);
+	gpio_request(GPIO_FN_A4_FOE, NULL);
+	gpio_request(GPIO_FN_A5_FCDE, NULL);
+	gpio_request(GPIO_FN_RD_FSC, NULL);
+
 	/* enable GPS module (GT-720F) */
 	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
 	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
@@ -1532,6 +1602,7 @@ static void __init mackerel_init(void)
 	sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
 	sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
 	sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
+	sh7372_add_device_to_domain(&sh7372_a3sp, &nand_flash_device);
 	sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
 	sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)

arch/arm/mach-shmobile/clock-sh7372.c

@@ -511,7 +511,7 @@ enum { MSTP001, MSTP000,
        MSTP223,
        MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207,
        MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-       MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
+	MSTP328, MSTP323, MSTP322, MSTP315, MSTP314, MSTP313, MSTP312,
        MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406,
        MSTP405, MSTP404, MSTP403, MSTP400,
        MSTP_NR };
@@ -553,6 +553,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */
 	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
 	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
+	[MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL*/
 	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */
@@ -653,6 +654,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP322]), /* USB0 */
+	CLKDEV_DEV_ID("sh_flctl.0", &mstp_clks[MSTP315]), /* FLCTL */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */

arch/arm/mach-u300/core.c

@@ -1544,6 +1544,8 @@ static struct fsmc_nand_platform_data nand_platform_data = {
 	.nr_partitions = ARRAY_SIZE(u300_partitions),
 	.options = NAND_SKIP_BBTSCAN,
 	.width = FSMC_NAND_BW8,
+	.ale_off = PLAT_NAND_ALE,
+	.cle_off = PLAT_NAND_CLE,
 };
 
 static struct platform_device nand_device = {

arch/arm/mach-u300/include/mach/u300-regs.h

@@ -24,6 +24,11 @@
 /* NFIF */
 #define U300_NAND_IF_PHYS_BASE		0x9f800000
 
+/* ALE, CLE offset for FSMC NAND */
+#define PLAT_NAND_CLE			(1 << 16)
+#define PLAT_NAND_ALE			(1 << 17)
+
+
 /* AHB Peripherals */
 #define U300_AHB_PER_PHYS_BASE		0xa0000000
 #define U300_AHB_PER_VIRT_BASE		0xff010000

arch/mips/cavium-octeon/flash_setup.c

@@ -60,7 +60,7 @@ static int __init flash_init(void)
 		if (mymtd) {
 			mymtd->owner = THIS_MODULE;
 			mtd_device_parse_register(mymtd, part_probe_types,
-						  0, NULL, 0);
+						  NULL, NULL, 0);
 		} else {
 			pr_err("Failed to register MTD device for flash\n");
 		}

drivers/dma/mxs-dma.c

@@ -22,10 +22,10 @@
 #include <linux/platform_device.h>
 #include <linux/dmaengine.h>
 #include <linux/delay.h>
+#include <linux/fsl/mxs-dma.h>
 
 #include <asm/irq.h>
 #include <mach/mxs.h>
-#include <mach/dma.h>
 #include <mach/common.h>
 
 #include "dmaengine.h"
@@ -337,10 +337,32 @@ static void mxs_dma_free_chan_resources(struct dma_chan *chan)
 	clk_disable_unprepare(mxs_dma->clk);
 }
 
+/*
+ * How to use the flags for ->device_prep_slave_sg() :
+ *    [1] If there is only one DMA command in the DMA chain, the code should be:
+ *            ......
+ *            ->device_prep_slave_sg(DMA_CTRL_ACK);
+ *            ......
+ *    [2] If there are two DMA commands in the DMA chain, the code should be
+ *            ......
+ *            ->device_prep_slave_sg(0);
+ *            ......
+ *            ->device_prep_slave_sg(DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ *            ......
+ *    [3] If there are more than two DMA commands in the DMA chain, the code
+ *        should be:
+ *            ......
+ *            ->device_prep_slave_sg(0);                                // First
+ *            ......
+ *            ->device_prep_slave_sg(DMA_PREP_INTERRUPT [| DMA_CTRL_ACK]);
+ *            ......
+ *            ->device_prep_slave_sg(DMA_PREP_INTERRUPT | DMA_CTRL_ACK); // Last
+ *            ......
+ */
 static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg(
 		struct dma_chan *chan, struct scatterlist *sgl,
 		unsigned int sg_len, enum dma_transfer_direction direction,
-		unsigned long append, void *context)
+		unsigned long flags, void *context)
 {
 	struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan);
 	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
@@ -348,6 +370,7 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg(
 	struct scatterlist *sg;
 	int i, j;
 	u32 *pio;
+	bool append = flags & DMA_PREP_INTERRUPT;
 	int idx = append ? mxs_chan->desc_count : 0;
 
 	if (mxs_chan->status == DMA_IN_PROGRESS && !append)
@@ -374,7 +397,6 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg(
 		ccw->bits |= CCW_CHAIN;
 		ccw->bits &= ~CCW_IRQ;
 		ccw->bits &= ~CCW_DEC_SEM;
-		ccw->bits &= ~CCW_WAIT4END;
 	} else {
 		idx = 0;
 	}
@@ -389,7 +411,8 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg(
 		ccw->bits = 0;
 		ccw->bits |= CCW_IRQ;
 		ccw->bits |= CCW_DEC_SEM;
-		ccw->bits |= CCW_WAIT4END;
+		if (flags & DMA_CTRL_ACK)
+			ccw->bits |= CCW_WAIT4END;
 		ccw->bits |= CCW_HALT_ON_TERM;
 		ccw->bits |= CCW_TERM_FLUSH;
 		ccw->bits |= BF_CCW(sg_len, PIO_NUM);
@@ -420,7 +443,8 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg(
 				ccw->bits &= ~CCW_CHAIN;
 				ccw->bits |= CCW_IRQ;
 				ccw->bits |= CCW_DEC_SEM;
-				ccw->bits |= CCW_WAIT4END;
+				if (flags & DMA_CTRL_ACK)
+					ccw->bits |= CCW_WAIT4END;
 			}
 		}
 	}

drivers/mmc/host/mxs-mmc.c

@@ -38,10 +38,10 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
+#include <linux/fsl/mxs-dma.h>
 
 #include <mach/mxs.h>
 #include <mach/common.h>
-#include <mach/dma.h>
 #include <mach/mmc.h>
 
 #define DRIVER_NAME	"mxs-mmc"
@@ -305,7 +305,7 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
 }
 
 static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
-	struct mxs_mmc_host *host, unsigned int append)
+	struct mxs_mmc_host *host, unsigned long flags)
 {
 	struct dma_async_tx_descriptor *desc;
 	struct mmc_data *data = host->data;
@@ -325,7 +325,7 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
 	}
 
 	desc = dmaengine_prep_slave_sg(host->dmach,
-				sgl, sg_len, host->slave_dirn, append);
+				sgl, sg_len, host->slave_dirn, flags);
 	if (desc) {
 		desc->callback = mxs_mmc_dma_irq_callback;
 		desc->callback_param = host;
@@ -358,7 +358,7 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host)
 	host->ssp_pio_words[2] = cmd1;
 	host->dma_dir = DMA_NONE;
 	host->slave_dirn = DMA_TRANS_NONE;
-	desc = mxs_mmc_prep_dma(host, 0);
+	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
 	if (!desc)
 		goto out;
 
@@ -398,7 +398,7 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host)
 	host->ssp_pio_words[2] = cmd1;
 	host->dma_dir = DMA_NONE;
 	host->slave_dirn = DMA_TRANS_NONE;
-	desc = mxs_mmc_prep_dma(host, 0);
+	desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
 	if (!desc)
 		goto out;
 
@@ -526,7 +526,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
 	host->data = data;
 	host->dma_dir = dma_data_dir;
 	host->slave_dirn = slave_dirn;
-	desc = mxs_mmc_prep_dma(host, 1);
+	desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc)
 		goto out;
 

drivers/mtd/Kconfig

@@ -304,9 +304,6 @@ config MTD_OOPS
 	  buffer in a flash partition where it can be read back at some
 	  later point.
 
-	  To use, add console=ttyMTDx to the kernel command line,
-	  where x is the MTD device number to use.
-
 config MTD_SWAP
 	tristate "Swap on MTD device support"
 	depends on MTD && SWAP

drivers/mtd/chips/cfi_cmdset_0001.c

@@ -87,7 +87,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private **
 
 static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len,
 		     size_t *retlen, void **virt, resource_size_t *phys);
-static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
+static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
 
 static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
 static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode);
@@ -262,9 +262,9 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd)
 static void fixup_use_point(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
-	if (!mtd->point && map_is_linear(map)) {
-		mtd->point   = cfi_intelext_point;
-		mtd->unpoint = cfi_intelext_unpoint;
+	if (!mtd->_point && map_is_linear(map)) {
+		mtd->_point   = cfi_intelext_point;
+		mtd->_unpoint = cfi_intelext_unpoint;
 	}
 }
 
@@ -274,8 +274,8 @@ static void fixup_use_write_buffers(struct mtd_info *mtd)
 	struct cfi_private *cfi = map->fldrv_priv;
 	if (cfi->cfiq->BufWriteTimeoutTyp) {
 		printk(KERN_INFO "Using buffer write method\n" );
-		mtd->write = cfi_intelext_write_buffers;
-		mtd->writev = cfi_intelext_writev;
+		mtd->_write = cfi_intelext_write_buffers;
+		mtd->_writev = cfi_intelext_writev;
 	}
 }
 
@@ -443,15 +443,15 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
 	mtd->type = MTD_NORFLASH;
 
 	/* Fill in the default mtd operations */
-	mtd->erase   = cfi_intelext_erase_varsize;
-	mtd->read    = cfi_intelext_read;
-	mtd->write   = cfi_intelext_write_words;
-	mtd->sync    = cfi_intelext_sync;
-	mtd->lock    = cfi_intelext_lock;
-	mtd->unlock  = cfi_intelext_unlock;
-	mtd->is_locked = cfi_intelext_is_locked;
-	mtd->suspend = cfi_intelext_suspend;
-	mtd->resume  = cfi_intelext_resume;
+	mtd->_erase   = cfi_intelext_erase_varsize;
+	mtd->_read    = cfi_intelext_read;
+	mtd->_write   = cfi_intelext_write_words;
+	mtd->_sync    = cfi_intelext_sync;
+	mtd->_lock    = cfi_intelext_lock;
+	mtd->_unlock  = cfi_intelext_unlock;
+	mtd->_is_locked = cfi_intelext_is_locked;
+	mtd->_suspend = cfi_intelext_suspend;
+	mtd->_resume  = cfi_intelext_resume;
 	mtd->flags   = MTD_CAP_NORFLASH;
 	mtd->name    = map->name;
 	mtd->writesize = 1;
@@ -600,12 +600,12 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd)
 	}
 
 #ifdef CONFIG_MTD_OTP
-	mtd->read_fact_prot_reg = cfi_intelext_read_fact_prot_reg;
-	mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg;
-	mtd->write_user_prot_reg = cfi_intelext_write_user_prot_reg;
-	mtd->lock_user_prot_reg = cfi_intelext_lock_user_prot_reg;
-	mtd->get_fact_prot_info = cfi_intelext_get_fact_prot_info;
-	mtd->get_user_prot_info = cfi_intelext_get_user_prot_info;
+	mtd->_read_fact_prot_reg = cfi_intelext_read_fact_prot_reg;
+	mtd->_read_user_prot_reg = cfi_intelext_read_user_prot_reg;
+	mtd->_write_user_prot_reg = cfi_intelext_write_user_prot_reg;
+	mtd->_lock_user_prot_reg = cfi_intelext_lock_user_prot_reg;
+	mtd->_get_fact_prot_info = cfi_intelext_get_fact_prot_info;
+	mtd->_get_user_prot_info = cfi_intelext_get_user_prot_info;
 #endif
 
 	/* This function has the potential to distort the reality
@@ -1017,8 +1017,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 	case FL_READY:
 	case FL_STATUS:
 	case FL_JEDEC_QUERY:
-		/* We should really make set_vpp() count, rather than doing this */
-		DISABLE_VPP(map);
 		break;
 	default:
 		printk(KERN_ERR "%s: put_chip() called with oldstate %d!!\n", map->name, chip->oldstate);
@@ -1324,7 +1322,7 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len,
 	int chipnum;
 	int ret = 0;
 
-	if (!map->virt || (from + len > mtd->size))
+	if (!map->virt)
 		return -EINVAL;
 
 	/* Now lock the chip(s) to POINT state */
@@ -1334,7 +1332,6 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len,
 	ofs = from - (chipnum << cfi->chipshift);
 
 	*virt = map->virt + cfi->chips[chipnum].start + ofs;
-	*retlen = 0;
 	if (phys)
 		*phys = map->phys + cfi->chips[chipnum].start + ofs;
 
@@ -1369,12 +1366,12 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len,
 	return 0;
 }
 
-static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
 	unsigned long ofs;
-	int chipnum;
+	int chipnum, err = 0;
 
 	/* Now unlock the chip(s) POINT state */
 
@@ -1382,7 +1379,7 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 	chipnum = (from >> cfi->chipshift);
 	ofs = from - (chipnum <<  cfi->chipshift);
 
-	while (len) {
+	while (len && !err) {
 		unsigned long thislen;
 		struct flchip *chip;
 
@@ -1400,8 +1397,10 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 			chip->ref_point_counter--;
 			if(chip->ref_point_counter == 0)
 				chip->state = FL_READY;
-		} else
-			printk(KERN_ERR "%s: Warning: unpoint called on non pointed region\n", map->name); /* Should this give an error? */
+		} else {
+			printk(KERN_ERR "%s: Error: unpoint called on non pointed region\n", map->name);
+			err = -EINVAL;
+		}
 
 		put_chip(map, chip, chip->start);
 		mutex_unlock(&chip->mutex);
@@ -1410,6 +1409,8 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 		ofs = 0;
 		chipnum++;
 	}
+
+	return err;
 }
 
 static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
@@ -1456,8 +1457,6 @@ static int cfi_intelext_read (struct mtd_info *mtd, loff_t from, size_t len, siz
 	chipnum = (from >> cfi->chipshift);
 	ofs = from - (chipnum <<  cfi->chipshift);
 
-	*retlen = 0;
-
 	while (len) {
 		unsigned long thislen;
 
@@ -1551,7 +1550,8 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 	}
 
 	xip_enable(map, chip, adr);
- out:	put_chip(map, chip, adr);
+ out:	DISABLE_VPP(map);
+	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 	return ret;
 }
@@ -1565,10 +1565,6 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le
 	int chipnum;
 	unsigned long ofs;
 
-	*retlen = 0;
-	if (!len)
-		return 0;
-
 	chipnum = to >> cfi->chipshift;
 	ofs = to  - (chipnum << cfi->chipshift);
 
@@ -1794,7 +1790,8 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 	}
 
 	xip_enable(map, chip, cmd_adr);
- out:	put_chip(map, chip, cmd_adr);
+ out:	DISABLE_VPP(map);
+	put_chip(map, chip, cmd_adr);
 	mutex_unlock(&chip->mutex);
 	return ret;
 }
@@ -1813,7 +1810,6 @@ static int cfi_intelext_writev (struct mtd_info *mtd, const struct kvec *vecs,
 	for (i = 0; i < count; i++)
 		len += vecs[i].iov_len;
 
-	*retlen = 0;
 	if (!len)
 		return 0;
 
@@ -1932,6 +1928,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 			ret = -EIO;
 		} else if (chipstatus & 0x20 && retries--) {
 			printk(KERN_DEBUG "block erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus);
+			DISABLE_VPP(map);
 			put_chip(map, chip, adr);
 			mutex_unlock(&chip->mutex);
 			goto retry;
@@ -1944,7 +1941,8 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	}
 
 	xip_enable(map, chip, adr);
- out:	put_chip(map, chip, adr);
+ out:	DISABLE_VPP(map);
+	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 	return ret;
 }
@@ -2086,7 +2084,8 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip
 	}
 
 	xip_enable(map, chip, adr);
-out:	put_chip(map, chip, adr);
+ out:	DISABLE_VPP(map);
+	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 	return ret;
 }
@@ -2483,7 +2482,7 @@ static int cfi_intelext_suspend(struct mtd_info *mtd)
 			   allowed to. Or should we return -EAGAIN, because the upper layers
 			   ought to have already shut down anything which was using the device
 			   anyway? The latter for now. */
-			printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->oldstate);
+			printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->state);
 			ret = -EAGAIN;
 		case FL_PM_SUSPENDED:
 			break;

drivers/mtd/chips/cfi_cmdset_0002.c

@@ -59,6 +59,9 @@ static void cfi_amdstd_resume (struct mtd_info *);
 static int cfi_amdstd_reboot(struct notifier_block *, unsigned long, void *);
 static int cfi_amdstd_secsi_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 
+static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+				  size_t *retlen, const u_char *buf);
+
 static void cfi_amdstd_destroy(struct mtd_info *);
 
 struct mtd_info *cfi_cmdset_0002(struct map_info *, int);
@@ -189,7 +192,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd)
 	struct cfi_private *cfi = map->fldrv_priv;
 	if (cfi->cfiq->BufWriteTimeoutTyp) {
 		pr_debug("Using buffer write method\n" );
-		mtd->write = cfi_amdstd_write_buffers;
+		mtd->_write = cfi_amdstd_write_buffers;
 	}
 }
 
@@ -228,8 +231,8 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
 static void fixup_use_secsi(struct mtd_info *mtd)
 {
 	/* Setup for chips with a secsi area */
-	mtd->read_user_prot_reg = cfi_amdstd_secsi_read;
-	mtd->read_fact_prot_reg = cfi_amdstd_secsi_read;
+	mtd->_read_user_prot_reg = cfi_amdstd_secsi_read;
+	mtd->_read_fact_prot_reg = cfi_amdstd_secsi_read;
 }
 
 static void fixup_use_erase_chip(struct mtd_info *mtd)
@@ -238,7 +241,7 @@ static void fixup_use_erase_chip(struct mtd_info *mtd)
 	struct cfi_private *cfi = map->fldrv_priv;
 	if ((cfi->cfiq->NumEraseRegions == 1) &&
 		((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0)) {
-		mtd->erase = cfi_amdstd_erase_chip;
+		mtd->_erase = cfi_amdstd_erase_chip;
 	}
 
 }
@@ -249,8 +252,8 @@ static void fixup_use_erase_chip(struct mtd_info *mtd)
  */
 static void fixup_use_atmel_lock(struct mtd_info *mtd)
 {
-	mtd->lock = cfi_atmel_lock;
-	mtd->unlock = cfi_atmel_unlock;
+	mtd->_lock = cfi_atmel_lock;
+	mtd->_unlock = cfi_atmel_unlock;
 	mtd->flags |= MTD_POWERUP_LOCK;
 }
 
@@ -429,12 +432,12 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
 	mtd->type = MTD_NORFLASH;
 
 	/* Fill in the default mtd operations */
-	mtd->erase   = cfi_amdstd_erase_varsize;
-	mtd->write   = cfi_amdstd_write_words;
-	mtd->read    = cfi_amdstd_read;
-	mtd->sync    = cfi_amdstd_sync;
-	mtd->suspend = cfi_amdstd_suspend;
-	mtd->resume  = cfi_amdstd_resume;
+	mtd->_erase   = cfi_amdstd_erase_varsize;
+	mtd->_write   = cfi_amdstd_write_words;
+	mtd->_read    = cfi_amdstd_read;
+	mtd->_sync    = cfi_amdstd_sync;
+	mtd->_suspend = cfi_amdstd_suspend;
+	mtd->_resume  = cfi_amdstd_resume;
 	mtd->flags   = MTD_CAP_NORFLASH;
 	mtd->name    = map->name;
 	mtd->writesize = 1;
@@ -443,6 +446,7 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
 	pr_debug("MTD %s(): write buffer size %d\n", __func__,
 			mtd->writebufsize);
 
+	mtd->_panic_write = cfi_amdstd_panic_write;
 	mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot;
 
 	if (cfi->cfi_mode==CFI_MODE_CFI){
@@ -770,8 +774,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 
 	case FL_READY:
 	case FL_STATUS:
-		/* We should really make set_vpp() count, rather than doing this */
-		DISABLE_VPP(map);
 		break;
 	default:
 		printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
@@ -1013,13 +1015,9 @@ static int cfi_amdstd_read (struct mtd_info *mtd, loff_t from, size_t len, size_
 	int ret = 0;
 
 	/* ofs: offset within the first chip that the first read should start */
-
 	chipnum = (from >> cfi->chipshift);
 	ofs = from - (chipnum <<  cfi->chipshift);
 
-
-	*retlen = 0;
-
 	while (len) {
 		unsigned long thislen;
 
@@ -1097,16 +1095,11 @@ static int cfi_amdstd_secsi_read (struct mtd_info *mtd, loff_t from, size_t len,
 	int chipnum;
 	int ret = 0;
 
-
 	/* ofs: offset within the first chip that the first read should start */
-
 	/* 8 secsi bytes per chip */
 	chipnum=from>>3;
 	ofs=from & 7;
 
-
-	*retlen = 0;
-
 	while (len) {
 		unsigned long thislen;
 
@@ -1234,6 +1227,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip,
 	xip_enable(map, chip, adr);
  op_done:
 	chip->state = FL_READY;
+	DISABLE_VPP(map);
 	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 
@@ -1251,10 +1245,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
 	unsigned long ofs, chipstart;
 	DECLARE_WAITQUEUE(wait, current);
 
-	*retlen = 0;
-	if (!len)
-		return 0;
-
 	chipnum = to >> cfi->chipshift;
 	ofs = to  - (chipnum << cfi->chipshift);
 	chipstart = cfi->chips[chipnum].start;
@@ -1476,6 +1466,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 	ret = -EIO;
  op_done:
 	chip->state = FL_READY;
+	DISABLE_VPP(map);
 	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 
@@ -1493,10 +1484,6 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
 	int chipnum;
 	unsigned long ofs;
 
-	*retlen = 0;
-	if (!len)
-		return 0;
-
 	chipnum = to >> cfi->chipshift;
 	ofs = to  - (chipnum << cfi->chipshift);
 
@@ -1562,6 +1549,238 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
 	return 0;
 }
 
+/*
+ * Wait for the flash chip to become ready to write data
+ *
+ * This is only called during the panic_write() path. When panic_write()
+ * is called, the kernel is in the process of a panic, and will soon be
+ * dead. Therefore we don't take any locks, and attempt to get access
+ * to the chip as soon as possible.
+ */
+static int cfi_amdstd_panic_wait(struct map_info *map, struct flchip *chip,
+				 unsigned long adr)
+{
+	struct cfi_private *cfi = map->fldrv_priv;
+	int retries = 10;
+	int i;
+
+	/*
+	 * If the driver thinks the chip is idle, and no toggle bits
+	 * are changing, then the chip is actually idle for sure.
+	 */
+	if (chip->state == FL_READY && chip_ready(map, adr))
+		return 0;
+
+	/*
+	 * Try several times to reset the chip and then wait for it
+	 * to become idle. The upper limit of a few milliseconds of
+	 * delay isn't a big problem: the kernel is dying anyway. It
+	 * is more important to save the messages.
+	 */
+	while (retries > 0) {
+		const unsigned long timeo = (HZ / 1000) + 1;
+
+		/* send the reset command */
+		map_write(map, CMD(0xF0), chip->start);
+
+		/* wait for the chip to become ready */
+		for (i = 0; i < jiffies_to_usecs(timeo); i++) {
+			if (chip_ready(map, adr))
+				return 0;
+
+			udelay(1);
+		}
+	}
+
+	/* the chip never became ready */
+	return -EBUSY;
+}
+
+/*
+ * Write out one word of data to a single flash chip during a kernel panic
+ *
+ * This is only called during the panic_write() path. When panic_write()
+ * is called, the kernel is in the process of a panic, and will soon be
+ * dead. Therefore we don't take any locks, and attempt to get access
+ * to the chip as soon as possible.
+ *
+ * The implementation of this routine is intentionally similar to
+ * do_write_oneword(), in order to ease code maintenance.
+ */
+static int do_panic_write_oneword(struct map_info *map, struct flchip *chip,
+				  unsigned long adr, map_word datum)
+{
+	const unsigned long uWriteTimeout = (HZ / 1000) + 1;
+	struct cfi_private *cfi = map->fldrv_priv;
+	int retry_cnt = 0;
+	map_word oldd;
+	int ret = 0;
+	int i;
+
+	adr += chip->start;
+
+	ret = cfi_amdstd_panic_wait(map, chip, adr);
+	if (ret)
+		return ret;
+
+	pr_debug("MTD %s(): PANIC WRITE 0x%.8lx(0x%.8lx)\n",
+			__func__, adr, datum.x[0]);
+
+	/*
+	 * Check for a NOP for the case when the datum to write is already
+	 * present - it saves time and works around buggy chips that corrupt
+	 * data at other locations when 0xff is written to a location that
+	 * already contains 0xff.
+	 */
+	oldd = map_read(map, adr);
+	if (map_word_equal(map, oldd, datum)) {
+		pr_debug("MTD %s(): NOP\n", __func__);
+		goto op_done;
+	}
+
+	ENABLE_VPP(map);
+
+retry:
+	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+	map_write(map, datum, adr);
+
+	for (i = 0; i < jiffies_to_usecs(uWriteTimeout); i++) {
+		if (chip_ready(map, adr))
+			break;
+
+		udelay(1);
+	}
+
+	if (!chip_good(map, adr, datum)) {
+		/* reset on all failures. */
+		map_write(map, CMD(0xF0), chip->start);
+		/* FIXME - should have reset delay before continuing */
+
+		if (++retry_cnt <= MAX_WORD_RETRIES)
+			goto retry;
+
+		ret = -EIO;
+	}
+
+op_done:
+	DISABLE_VPP(map);
+	return ret;
+}
+
+/*
+ * Write out some data during a kernel panic
+ *
+ * This is used by the mtdoops driver to save the dying messages from a
+ * kernel which has panic'd.
+ *
+ * This routine ignores all of the locking used throughout the rest of the
+ * driver, in order to ensure that the data gets written out no matter what
+ * state this driver (and the flash chip itself) was in when the kernel crashed.
+ *
+ * The implementation of this routine is intentionally similar to
+ * cfi_amdstd_write_words(), in order to ease code maintenance.
+ */
+static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+				  size_t *retlen, const u_char *buf)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	unsigned long ofs, chipstart;
+	int ret = 0;
+	int chipnum;
+
+	chipnum = to >> cfi->chipshift;
+	ofs = to - (chipnum << cfi->chipshift);
+	chipstart = cfi->chips[chipnum].start;
+
+	/* If it's not bus aligned, do the first byte write */
+	if (ofs & (map_bankwidth(map) - 1)) {
+		unsigned long bus_ofs = ofs & ~(map_bankwidth(map) - 1);
+		int i = ofs - bus_ofs;
+		int n = 0;
+		map_word tmp_buf;
+
+		ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], bus_ofs);
+		if (ret)
+			return ret;
+
+		/* Load 'tmp_buf' with old contents of flash */
+		tmp_buf = map_read(map, bus_ofs + chipstart);
+
+		/* Number of bytes to copy from buffer */
+		n = min_t(int, len, map_bankwidth(map) - i);
+
+		tmp_buf = map_word_load_partial(map, tmp_buf, buf, i, n);
+
+		ret = do_panic_write_oneword(map, &cfi->chips[chipnum],
+					     bus_ofs, tmp_buf);
+		if (ret)
+			return ret;
+
+		ofs += n;
+		buf += n;
+		(*retlen) += n;
+		len -= n;
+
+		if (ofs >> cfi->chipshift) {
+			chipnum++;
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+		}
+	}
+
+	/* We are now aligned, write as much as possible */
+	while (len >= map_bankwidth(map)) {
+		map_word datum;
+
+		datum = map_word_load(map, buf);
+
+		ret = do_panic_write_oneword(map, &cfi->chips[chipnum],
+					     ofs, datum);
+		if (ret)
+			return ret;
+
+		ofs += map_bankwidth(map);
+		buf += map_bankwidth(map);
+		(*retlen) += map_bankwidth(map);
+		len -= map_bankwidth(map);
+
+		if (ofs >> cfi->chipshift) {
+			chipnum++;
+			ofs = 0;
+			if (chipnum == cfi->numchips)
+				return 0;
+
+			chipstart = cfi->chips[chipnum].start;
+		}
+	}
+
+	/* Write the trailing bytes if any */
+	if (len & (map_bankwidth(map) - 1)) {
+		map_word tmp_buf;
+
+		ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], ofs);
+		if (ret)
+			return ret;
+
+		tmp_buf = map_read(map, ofs + chipstart);
+
+		tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len);
+
+		ret = do_panic_write_oneword(map, &cfi->chips[chipnum],
+					     ofs, tmp_buf);
+		if (ret)
+			return ret;
+
+		(*retlen) += len;
+	}
+
+	return 0;
+}
+
 
 /*
  * Handle devices with one erase region, that only implement
@@ -1649,6 +1868,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
 
 	chip->state = FL_READY;
 	xip_enable(map, chip, adr);
+	DISABLE_VPP(map);
 	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 
@@ -1739,6 +1959,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	}
 
 	chip->state = FL_READY;
+	DISABLE_VPP(map);
 	put_chip(map, chip, adr);
 	mutex_unlock(&chip->mutex);
 	return ret;

drivers/mtd/chips/cfi_cmdset_0020.c

@@ -228,15 +228,15 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map)
 		}
 
 	/* Also select the correct geometry setup too */
-	mtd->erase = cfi_staa_erase_varsize;
-	mtd->read = cfi_staa_read;
-        mtd->write = cfi_staa_write_buffers;
-	mtd->writev = cfi_staa_writev;
-	mtd->sync = cfi_staa_sync;
-	mtd->lock = cfi_staa_lock;
-	mtd->unlock = cfi_staa_unlock;
-	mtd->suspend = cfi_staa_suspend;
-	mtd->resume = cfi_staa_resume;
+	mtd->_erase = cfi_staa_erase_varsize;
+	mtd->_read = cfi_staa_read;
+	mtd->_write = cfi_staa_write_buffers;
+	mtd->_writev = cfi_staa_writev;
+	mtd->_sync = cfi_staa_sync;
+	mtd->_lock = cfi_staa_lock;
+	mtd->_unlock = cfi_staa_unlock;
+	mtd->_suspend = cfi_staa_suspend;
+	mtd->_resume = cfi_staa_resume;
 	mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE;
 	mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
 	mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
@@ -394,8 +394,6 @@ static int cfi_staa_read (struct mtd_info *mtd, loff_t from, size_t len, size_t
 	chipnum = (from >> cfi->chipshift);
 	ofs = from - (chipnum <<  cfi->chipshift);
 
-	*retlen = 0;
-
 	while (len) {
 		unsigned long thislen;
 
@@ -617,10 +615,6 @@ static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to,
 	int chipnum;
 	unsigned long ofs;
 
-	*retlen = 0;
-	if (!len)
-		return 0;
-
 	chipnum = to >> cfi->chipshift;
 	ofs = to  - (chipnum << cfi->chipshift);
 
@@ -904,12 +898,6 @@ static int cfi_staa_erase_varsize(struct mtd_info *mtd,
 	int i, first;
 	struct mtd_erase_region_info *regions = mtd->eraseregions;
 
-	if (instr->addr > mtd->size)
-		return -EINVAL;
-
-	if ((instr->len + instr->addr) > mtd->size)
-		return -EINVAL;
-
 	/* Check that both start and end of the requested erase are
 	 * aligned with the erasesize at the appropriate addresses.
 	 */
@@ -1155,9 +1143,6 @@ static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	if (len & (mtd->erasesize -1))
 		return -EINVAL;
 
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-
 	chipnum = ofs >> cfi->chipshift;
 	adr = ofs - (chipnum << cfi->chipshift);
 

drivers/mtd/chips/cfi_util.c

@@ -173,12 +173,6 @@ int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
 	int i, first;
 	struct mtd_erase_region_info *regions = mtd->eraseregions;
 
-	if (ofs > mtd->size)
-		return -EINVAL;
-
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-
 	/* Check that both start and end of the requested erase are
 	 * aligned with the erasesize at the appropriate addresses.
 	 */

drivers/mtd/chips/fwh_lock.h

@@ -101,7 +101,7 @@ static void fixup_use_fwh_lock(struct mtd_info *mtd)
 {
 	printk(KERN_NOTICE "using fwh lock/unlock method\n");
 	/* Setup for the chips with the fwh lock method */
-	mtd->lock   = fwh_lock_varsize;
-	mtd->unlock = fwh_unlock_varsize;
+	mtd->_lock   = fwh_lock_varsize;
+	mtd->_unlock = fwh_unlock_varsize;
 }
 #endif /* FWH_LOCK_H */

drivers/mtd/chips/map_absent.c

@@ -55,10 +55,10 @@ static struct mtd_info *map_absent_probe(struct map_info *map)
 	mtd->name 	= map->name;
 	mtd->type 	= MTD_ABSENT;
 	mtd->size 	= map->size;
-	mtd->erase 	= map_absent_erase;
-	mtd->read 	= map_absent_read;
-	mtd->write 	= map_absent_write;
-	mtd->sync 	= map_absent_sync;
+	mtd->_erase 	= map_absent_erase;
+	mtd->_read 	= map_absent_read;
+	mtd->_write 	= map_absent_write;
+	mtd->_sync 	= map_absent_sync;
 	mtd->flags 	= 0;
 	mtd->erasesize  = PAGE_SIZE;
 	mtd->writesize  = 1;
@@ -70,13 +70,11 @@ static struct mtd_info *map_absent_probe(struct map_info *map)
 
 static int map_absent_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
 {
-	*retlen = 0;
 	return -ENODEV;
 }
 
 static int map_absent_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
 {
-	*retlen = 0;
 	return -ENODEV;
 }
 

drivers/mtd/chips/map_ram.c

@@ -64,11 +64,11 @@ static struct mtd_info *map_ram_probe(struct map_info *map)
 	mtd->name = map->name;
 	mtd->type = MTD_RAM;
 	mtd->size = map->size;
-	mtd->erase = mapram_erase;
-	mtd->get_unmapped_area = mapram_unmapped_area;
-	mtd->read = mapram_read;
-	mtd->write = mapram_write;
-	mtd->sync = mapram_nop;
+	mtd->_erase = mapram_erase;
+	mtd->_get_unmapped_area = mapram_unmapped_area;
+	mtd->_read = mapram_read;
+	mtd->_write = mapram_write;
+	mtd->_sync = mapram_nop;
 	mtd->flags = MTD_CAP_RAM;
 	mtd->writesize = 1;
 
@@ -122,14 +122,10 @@ static int mapram_erase (struct mtd_info *mtd, struct erase_info *instr)
 	unsigned long i;
 
 	allff = map_word_ff(map);
-
 	for (i=0; i<instr->len; i += map_bankwidth(map))
 		map_write(map, allff, instr->addr + i);
-
 	instr->state = MTD_ERASE_DONE;
-
 	mtd_erase_callback(instr);
-
 	return 0;
 }
 

drivers/mtd/chips/map_rom.c

@@ -41,11 +41,11 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
 	mtd->name = map->name;
 	mtd->type = MTD_ROM;
 	mtd->size = map->size;
-	mtd->get_unmapped_area = maprom_unmapped_area;
-	mtd->read = maprom_read;
-	mtd->write = maprom_write;
-	mtd->sync = maprom_nop;
-	mtd->erase = maprom_erase;
+	mtd->_get_unmapped_area = maprom_unmapped_area;
+	mtd->_read = maprom_read;
+	mtd->_write = maprom_write;
+	mtd->_sync = maprom_nop;
+	mtd->_erase = maprom_erase;
 	mtd->flags = MTD_CAP_ROM;
 	mtd->erasesize = map->size;
 	mtd->writesize = 1;
@@ -85,8 +85,7 @@ static void maprom_nop(struct mtd_info *mtd)
 
 static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
 {
-	printk(KERN_NOTICE "maprom_write called\n");
-	return -EIO;
+	return -EROFS;
 }
 
 static int maprom_erase (struct mtd_info *mtd, struct erase_info *info)

drivers/mtd/devices/Kconfig

@@ -103,6 +103,13 @@ config M25PXX_USE_FAST_READ
 	help
 	  This option enables FAST_READ access supported by ST M25Pxx.
 
+config MTD_SPEAR_SMI
+	tristate "SPEAR MTD NOR Support through SMI controller"
+	depends on PLAT_SPEAR
+	default y
+	help
+	  This enable SNOR support on SPEAR platforms using SMI controller
+
 config MTD_SST25L
 	tristate "Support SST25L (non JEDEC) SPI Flash chips"
 	depends on SPI_MASTER

drivers/mtd/devices/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
 obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
 obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
+obj-$(CONFIG_MTD_SPEAR_SMI)	+= spear_smi.o
 obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
 
 CFLAGS_docg3.o			+= -I$(src)

drivers/mtd/devices/block2mtd.c

@@ -104,14 +104,6 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int offset = from & (PAGE_SIZE-1);
 	int cpylen;
 
-	if (from > mtd->size)
-		return -EINVAL;
-	if (from + len > mtd->size)
-		len = mtd->size - from;
-
-	if (retlen)
-		*retlen = 0;
-
 	while (len) {
 		if ((offset + len) > PAGE_SIZE)
 			cpylen = PAGE_SIZE - offset;	// multiple pages
@@ -148,8 +140,6 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf,
 	int offset = to & ~PAGE_MASK;	// page offset
 	int cpylen;
 
-	if (retlen)
-		*retlen = 0;
 	while (len) {
 		if ((offset+len) > PAGE_SIZE)
 			cpylen = PAGE_SIZE - offset;	// multiple pages
@@ -188,13 +178,6 @@ static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct block2mtd_dev *dev = mtd->priv;
 	int err;
 
-	if (!len)
-		return 0;
-	if (to >= mtd->size)
-		return -ENOSPC;
-	if (to + len > mtd->size)
-		len = mtd->size - to;
-
 	mutex_lock(&dev->write_mutex);
 	err = _block2mtd_write(dev, buf, to, len, retlen);
 	mutex_unlock(&dev->write_mutex);
@@ -283,13 +266,14 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
 	dev->mtd.erasesize = erase_size;
 	dev->mtd.writesize = 1;
+	dev->mtd.writebufsize = PAGE_SIZE;
 	dev->mtd.type = MTD_RAM;
 	dev->mtd.flags = MTD_CAP_RAM;
-	dev->mtd.erase = block2mtd_erase;
-	dev->mtd.write = block2mtd_write;
-	dev->mtd.writev = mtd_writev;
-	dev->mtd.sync = block2mtd_sync;
-	dev->mtd.read = block2mtd_read;
+	dev->mtd._erase = block2mtd_erase;
+	dev->mtd._write = block2mtd_write;
+	dev->mtd._writev = mtd_writev;
+	dev->mtd._sync = block2mtd_sync;
+	dev->mtd._read = block2mtd_read;
 	dev->mtd.priv = dev;
 	dev->mtd.owner = THIS_MODULE;
 

drivers/mtd/devices/doc2000.c

@@ -562,14 +562,15 @@ void DoC2k_init(struct mtd_info *mtd)
 
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->writesize = 512;
+	mtd->writebufsize = mtd->writesize = 512;
 	mtd->oobsize = 16;
+	mtd->ecc_strength = 2;
 	mtd->owner = THIS_MODULE;
-	mtd->erase = doc_erase;
-	mtd->read = doc_read;
-	mtd->write = doc_write;
-	mtd->read_oob = doc_read_oob;
-	mtd->write_oob = doc_write_oob;
+	mtd->_erase = doc_erase;
+	mtd->_read = doc_read;
+	mtd->_write = doc_write;
+	mtd->_read_oob = doc_read_oob;
+	mtd->_write_oob = doc_write_oob;
 	this->curfloor = -1;
 	this->curchip = -1;
 	mutex_init(&this->lock);
@@ -602,13 +603,7 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int i, len256 = 0, ret=0;
 	size_t left = len;
 
-	/* Don't allow read past end of device */
-	if (from >= this->totlen)
-		return -EINVAL;
-
 	mutex_lock(&this->lock);
-
-	*retlen = 0;
 	while (left) {
 		len = left;
 
@@ -748,13 +743,7 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
 	size_t left = len;
 	int status;
 
-	/* Don't allow write past end of device */
-	if (to >= this->totlen)
-		return -EINVAL;
-
 	mutex_lock(&this->lock);
-
-	*retlen = 0;
 	while (left) {
 		len = left;
 

drivers/mtd/devices/doc2001.c

@@ -346,14 +346,15 @@ void DoCMil_init(struct mtd_info *mtd)
 
 	/* FIXME: erase size is not always 8KiB */
 	mtd->erasesize = 0x2000;
-	mtd->writesize = 512;
+	mtd->writebufsize = mtd->writesize = 512;
 	mtd->oobsize = 16;
+	mtd->ecc_strength = 2;
 	mtd->owner = THIS_MODULE;
-	mtd->erase = doc_erase;
-	mtd->read = doc_read;
-	mtd->write = doc_write;
-	mtd->read_oob = doc_read_oob;
-	mtd->write_oob = doc_write_oob;
+	mtd->_erase = doc_erase;
+	mtd->_read = doc_read;
+	mtd->_write = doc_write;
+	mtd->_read_oob = doc_read_oob;
+	mtd->_write_oob = doc_write_oob;
 	this->curfloor = -1;
 	this->curchip = -1;
 
@@ -383,10 +384,6 @@ static int doc_read (struct mtd_info *mtd, loff_t from, size_t len,
 	void __iomem *docptr = this->virtadr;
 	struct Nand *mychip = &this->chips[from >> (this->chipshift)];
 
-	/* Don't allow read past end of device */
-	if (from >= this->totlen)
-		return -EINVAL;
-
 	/* Don't allow a single read to cross a 512-byte block boundary */
 	if (from + len > ((from | 0x1ff) + 1))
 		len = ((from | 0x1ff) + 1) - from;
@@ -494,10 +491,6 @@ static int doc_write (struct mtd_info *mtd, loff_t to, size_t len,
 	void __iomem *docptr = this->virtadr;
 	struct Nand *mychip = &this->chips[to >> (this->chipshift)];
 
-	/* Don't allow write past end of device */
-	if (to >= this->totlen)
-		return -EINVAL;
-
 #if 0
 	/* Don't allow a single write to cross a 512-byte block boundary */
 	if (to + len > ( (to | 0x1ff) + 1))
@@ -599,7 +592,6 @@ static int doc_write (struct mtd_info *mtd, loff_t to, size_t len,
 		printk("Error programming flash\n");
 		/* Error in programming
 		   FIXME: implement Bad Block Replacement (in nftl.c ??) */
-		*retlen = 0;
 		ret = -EIO;
 	}
 	dummy = ReadDOC(docptr, LastDataRead);

drivers/mtd/devices/doc2001plus.c

@@ -467,14 +467,15 @@ void DoCMilPlus_init(struct mtd_info *mtd)
 
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->writesize = 512;
+	mtd->writebufsize = mtd->writesize = 512;
 	mtd->oobsize = 16;
+	mtd->ecc_strength = 2;
 	mtd->owner = THIS_MODULE;
-	mtd->erase = doc_erase;
-	mtd->read = doc_read;
-	mtd->write = doc_write;
-	mtd->read_oob = doc_read_oob;
-	mtd->write_oob = doc_write_oob;
+	mtd->_erase = doc_erase;
+	mtd->_read = doc_read;
+	mtd->_write = doc_write;
+	mtd->_read_oob = doc_read_oob;
+	mtd->_write_oob = doc_write_oob;
 	this->curfloor = -1;
 	this->curchip = -1;
 
@@ -581,10 +582,6 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
 	void __iomem * docptr = this->virtadr;
 	struct Nand *mychip = &this->chips[from >> (this->chipshift)];
 
-	/* Don't allow read past end of device */
-	if (from >= this->totlen)
-		return -EINVAL;
-
 	/* Don't allow a single read to cross a 512-byte block boundary */
 	if (from + len > ((from | 0x1ff) + 1))
 		len = ((from | 0x1ff) + 1) - from;
@@ -700,10 +697,6 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
 	void __iomem * docptr = this->virtadr;
 	struct Nand *mychip = &this->chips[to >> (this->chipshift)];
 
-	/* Don't allow write past end of device */
-	if (to >= this->totlen)
-		return -EINVAL;
-
 	/* Don't allow writes which aren't exactly one block (512 bytes) */
 	if ((to & 0x1ff) || (len != 0x200))
 		return -EINVAL;
@@ -800,7 +793,6 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
 		printk("MTD: Error 0x%x programming at 0x%x\n", dummy, (int)to);
 		/* Error in programming
 		   FIXME: implement Bad Block Replacement (in nftl.c ??) */
-		*retlen = 0;
 		ret = -EIO;
 	}
 	dummy = ReadDOC(docptr, Mplus_LastDataRead);

drivers/mtd/devices/docg3.c

@@ -80,14 +80,9 @@ static struct nand_ecclayout docg3_oobinfo = {
 	.oobavail = 8,
 };
 
-/**
- * struct docg3_bch - BCH engine
- */
-static struct bch_control *docg3_bch;
-
 static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
 {
-	u8 val = readb(docg3->base + reg);
+	u8 val = readb(docg3->cascade->base + reg);
 
 	trace_docg3_io(0, 8, reg, (int)val);
 	return val;
@@ -95,7 +90,7 @@ static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
 
 static inline u16 doc_readw(struct docg3 *docg3, u16 reg)
 {
-	u16 val = readw(docg3->base + reg);
+	u16 val = readw(docg3->cascade->base + reg);
 
 	trace_docg3_io(0, 16, reg, (int)val);
 	return val;
@@ -103,13 +98,13 @@ static inline u16 doc_readw(struct docg3 *docg3, u16 reg)
 
 static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg)
 {
-	writeb(val, docg3->base + reg);
+	writeb(val, docg3->cascade->base + reg);
 	trace_docg3_io(1, 8, reg, val);
 }
 
 static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg)
 {
-	writew(val, docg3->base + reg);
+	writew(val, docg3->cascade->base + reg);
 	trace_docg3_io(1, 16, reg, val);
 }
 
@@ -643,7 +638,8 @@ static int doc_ecc_bch_fix_data(struct docg3 *docg3, void *buf, u8 *hwecc)
 
 	for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
 		ecc[i] = bitrev8(hwecc[i]);
-	numerrs = decode_bch(docg3_bch, NULL, DOC_ECC_BCH_COVERED_BYTES,
+	numerrs = decode_bch(docg3->cascade->bch, NULL,
+			     DOC_ECC_BCH_COVERED_BYTES,
 			     NULL, ecc, NULL, errorpos);
 	BUG_ON(numerrs == -EINVAL);
 	if (numerrs < 0)
@@ -734,7 +730,7 @@ err:
  * doc_read_page_getbytes - Reads bytes from a prepared page
  * @docg3: the device
  * @len: the number of bytes to be read (must be a multiple of 4)
- * @buf: the buffer to be filled in
+ * @buf: the buffer to be filled in (or NULL is forget bytes)
  * @first: 1 if first time read, DOC_READADDRESS should be set
  *
  */
@@ -849,7 +845,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
 			struct mtd_oob_ops *ops)
 {
 	struct docg3 *docg3 = mtd->priv;
-	int block0, block1, page, ret, ofs = 0;
+	int block0, block1, page, ret, skip, ofs = 0;
 	u8 *oobbuf = ops->oobbuf;
 	u8 *buf = ops->datbuf;
 	size_t len, ooblen, nbdata, nboob;
@@ -869,34 +865,36 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
 
 	doc_dbg("doc_read_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n",
 		from, ops->mode, buf, len, oobbuf, ooblen);
-	if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % DOC_LAYOUT_OOB_SIZE) ||
-	    (from % DOC_LAYOUT_PAGE_SIZE))
+	if (ooblen % DOC_LAYOUT_OOB_SIZE)
 		return -EINVAL;
 
-	ret = -EINVAL;
-	calc_block_sector(from + len, &block0, &block1, &page, &ofs,
-			  docg3->reliable);
-	if (block1 > docg3->max_block)
-		goto err;
+	if (from + len > mtd->size)
+		return -EINVAL;
 
 	ops->oobretlen = 0;
 	ops->retlen = 0;
 	ret = 0;
+	skip = from % DOC_LAYOUT_PAGE_SIZE;
+	mutex_lock(&docg3->cascade->lock);
 	while (!ret && (len > 0 || ooblen > 0)) {
-		calc_block_sector(from, &block0, &block1, &page, &ofs,
+		calc_block_sector(from - skip, &block0, &block1, &page, &ofs,
 			docg3->reliable);
-		nbdata = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+		nbdata = min_t(size_t, len, DOC_LAYOUT_PAGE_SIZE - skip);
 		nboob = min_t(size_t, ooblen, (size_t)DOC_LAYOUT_OOB_SIZE);
 		ret = doc_read_page_prepare(docg3, block0, block1, page, ofs);
 		if (ret < 0)
-			goto err;
+			goto out;
 		ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES);
 		if (ret < 0)
 			goto err_in_read;
-		ret = doc_read_page_getbytes(docg3, nbdata, buf, 1);
+		ret = doc_read_page_getbytes(docg3, skip, NULL, 1);
+		if (ret < skip)
+			goto err_in_read;
+		ret = doc_read_page_getbytes(docg3, nbdata, buf, 0);
 		if (ret < nbdata)
 			goto err_in_read;
-		doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE - nbdata,
+		doc_read_page_getbytes(docg3,
+				       DOC_LAYOUT_PAGE_SIZE - nbdata - skip,
 				       NULL, 0);
 		ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0);
 		if (ret < nboob)
@@ -950,13 +948,15 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from,
 		len -= nbdata;
 		ooblen -= nboob;
 		from += DOC_LAYOUT_PAGE_SIZE;
+		skip = 0;
 	}
 
+out:
+	mutex_unlock(&docg3->cascade->lock);
 	return ret;
 err_in_read:
 	doc_read_page_finish(docg3);
-err:
-	return ret;
+	goto out;
 }
 
 /**
@@ -1114,10 +1114,10 @@ static int doc_get_op_status(struct docg3 *docg3)
  */
 static int doc_write_erase_wait_status(struct docg3 *docg3)
 {
-	int status, ret = 0;
+	int i, status, ret = 0;
 
-	if (!doc_is_ready(docg3))
-		usleep_range(3000, 3000);
+	for (i = 0; !doc_is_ready(docg3) && i < 5; i++)
+		msleep(20);
 	if (!doc_is_ready(docg3)) {
 		doc_dbg("Timeout reached and the chip is still not ready\n");
 		ret = -EAGAIN;
@@ -1196,18 +1196,19 @@ static int doc_erase(struct mtd_info *mtd, struct erase_info *info)
 	int block0, block1, page, ret, ofs = 0;
 
 	doc_dbg("doc_erase(from=%lld, len=%lld\n", info->addr, info->len);
-	doc_set_device_id(docg3, docg3->device_id);
 
 	info->state = MTD_ERASE_PENDING;
 	calc_block_sector(info->addr + info->len, &block0, &block1, &page,
 			  &ofs, docg3->reliable);
 	ret = -EINVAL;
-	if (block1 > docg3->max_block || page || ofs)
+	if (info->addr + info->len > mtd->size || page || ofs)
 		goto reset_err;
 
 	ret = 0;
 	calc_block_sector(info->addr, &block0, &block1, &page, &ofs,
 			  docg3->reliable);
+	mutex_lock(&docg3->cascade->lock);
+	doc_set_device_id(docg3, docg3->device_id);
 	doc_set_reliable_mode(docg3);
 	for (len = info->len; !ret && len > 0; len -= mtd->erasesize) {
 		info->state = MTD_ERASING;
@@ -1215,6 +1216,7 @@ static int doc_erase(struct mtd_info *mtd, struct erase_info *info)
 		block0 += 2;
 		block1 += 2;
 	}
+	mutex_unlock(&docg3->cascade->lock);
 
 	if (ret)
 		goto reset_err;
@@ -1401,7 +1403,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
 			 struct mtd_oob_ops *ops)
 {
 	struct docg3 *docg3 = mtd->priv;
-	int block0, block1, page, ret, pofs = 0, autoecc, oobdelta;
+	int ret, autoecc, oobdelta;
 	u8 *oobbuf = ops->oobbuf;
 	u8 *buf = ops->datbuf;
 	size_t len, ooblen;
@@ -1438,12 +1440,8 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
 	if (len && ooblen &&
 	    (len / DOC_LAYOUT_PAGE_SIZE) != (ooblen / oobdelta))
 		return -EINVAL;
-
-	ret = -EINVAL;
-	calc_block_sector(ofs + len, &block0, &block1, &page, &pofs,
-			  docg3->reliable);
-	if (block1 > docg3->max_block)
-		goto err;
+	if (ofs + len > mtd->size)
+		return -EINVAL;
 
 	ops->oobretlen = 0;
 	ops->retlen = 0;
@@ -1457,6 +1455,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
 	if (autoecc < 0)
 		return autoecc;
 
+	mutex_lock(&docg3->cascade->lock);
 	while (!ret && len > 0) {
 		memset(oob, 0, sizeof(oob));
 		if (ofs == docg3->oob_write_ofs)
@@ -1477,8 +1476,9 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
 		}
 		ops->retlen += DOC_LAYOUT_PAGE_SIZE;
 	}
-err:
+
 	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
 	return ret;
 }
 
@@ -1535,9 +1535,11 @@ static ssize_t dps0_is_key_locked(struct device *dev,
 	struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
 	int dps0;
 
+	mutex_lock(&docg3->cascade->lock);
 	doc_set_device_id(docg3, docg3->device_id);
 	dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
 	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
 
 	return sprintf(buf, "%d\n", !(dps0 & DOC_DPS_KEY_OK));
 }
@@ -1548,9 +1550,11 @@ static ssize_t dps1_is_key_locked(struct device *dev,
 	struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
 	int dps1;
 
+	mutex_lock(&docg3->cascade->lock);
 	doc_set_device_id(docg3, docg3->device_id);
 	dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
 	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
 
 	return sprintf(buf, "%d\n", !(dps1 & DOC_DPS_KEY_OK));
 }
@@ -1565,10 +1569,12 @@ static ssize_t dps0_insert_key(struct device *dev,
 	if (count != DOC_LAYOUT_DPS_KEY_LENGTH)
 		return -EINVAL;
 
+	mutex_lock(&docg3->cascade->lock);
 	doc_set_device_id(docg3, docg3->device_id);
 	for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++)
 		doc_writeb(docg3, buf[i], DOC_DPS0_KEY);
 	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
 	return count;
 }
 
@@ -1582,10 +1588,12 @@ static ssize_t dps1_insert_key(struct device *dev,
 	if (count != DOC_LAYOUT_DPS_KEY_LENGTH)
 		return -EINVAL;
 
+	mutex_lock(&docg3->cascade->lock);
 	doc_set_device_id(docg3, docg3->device_id);
 	for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++)
 		doc_writeb(docg3, buf[i], DOC_DPS1_KEY);
 	doc_set_device_id(docg3, 0);
+	mutex_unlock(&docg3->cascade->lock);
 	return count;
 }
 
@@ -1601,13 +1609,13 @@ static struct device_attribute doc_sys_attrs[DOC_MAX_NBFLOORS][4] = {
 };
 
 static int doc_register_sysfs(struct platform_device *pdev,
-			      struct mtd_info **floors)
+			      struct docg3_cascade *cascade)
 {
 	int ret = 0, floor, i = 0;
 	struct device *dev = &pdev->dev;
 
-	for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS && floors[floor];
-	     floor++)
+	for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS &&
+		     cascade->floors[floor]; floor++)
 		for (i = 0; !ret && i < 4; i++)
 			ret = device_create_file(dev, &doc_sys_attrs[floor][i]);
 	if (!ret)
@@ -1621,12 +1629,12 @@ static int doc_register_sysfs(struct platform_device *pdev,
 }
 
 static void doc_unregister_sysfs(struct platform_device *pdev,
-				 struct mtd_info **floors)
+				 struct docg3_cascade *cascade)
 {
 	struct device *dev = &pdev->dev;
 	int floor, i;
 
-	for (floor = 0; floor < DOC_MAX_NBFLOORS && floors[floor];
+	for (floor = 0; floor < DOC_MAX_NBFLOORS && cascade->floors[floor];
 	     floor++)
 		for (i = 0; i < 4; i++)
 			device_remove_file(dev, &doc_sys_attrs[floor][i]);
@@ -1640,7 +1648,11 @@ static int dbg_flashctrl_show(struct seq_file *s, void *p)
 	struct docg3 *docg3 = (struct docg3 *)s->private;
 
 	int pos = 0;
-	u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+	u8 fctrl;
+
+	mutex_lock(&docg3->cascade->lock);
+	fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+	mutex_unlock(&docg3->cascade->lock);
 
 	pos += seq_printf(s,
 		 "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
@@ -1658,9 +1670,12 @@ static int dbg_asicmode_show(struct seq_file *s, void *p)
 {
 	struct docg3 *docg3 = (struct docg3 *)s->private;
 
-	int pos = 0;
-	int pctrl = doc_register_readb(docg3, DOC_ASICMODE);
-	int mode = pctrl & 0x03;
+	int pos = 0, pctrl, mode;
+
+	mutex_lock(&docg3->cascade->lock);
+	pctrl = doc_register_readb(docg3, DOC_ASICMODE);
+	mode = pctrl & 0x03;
+	mutex_unlock(&docg3->cascade->lock);
 
 	pos += seq_printf(s,
 			 "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
@@ -1692,7 +1707,11 @@ static int dbg_device_id_show(struct seq_file *s, void *p)
 {
 	struct docg3 *docg3 = (struct docg3 *)s->private;
 	int pos = 0;
-	int id = doc_register_readb(docg3, DOC_DEVICESELECT);
+	int id;
+
+	mutex_lock(&docg3->cascade->lock);
+	id = doc_register_readb(docg3, DOC_DEVICESELECT);
+	mutex_unlock(&docg3->cascade->lock);
 
 	pos += seq_printf(s, "DeviceId = %d\n", id);
 	return pos;
@@ -1705,6 +1724,7 @@ static int dbg_protection_show(struct seq_file *s, void *p)
 	int pos = 0;
 	int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high;
 
+	mutex_lock(&docg3->cascade->lock);
 	protect = doc_register_readb(docg3, DOC_PROTECTION);
 	dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
 	dps0_low = doc_register_readw(docg3, DOC_DPS0_ADDRLOW);
@@ -1712,6 +1732,7 @@ static int dbg_protection_show(struct seq_file *s, void *p)
 	dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
 	dps1_low = doc_register_readw(docg3, DOC_DPS1_ADDRLOW);
 	dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH);
+	mutex_unlock(&docg3->cascade->lock);
 
 	pos += seq_printf(s, "Protection = 0x%02x (",
 			 protect);
@@ -1804,7 +1825,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 
 	switch (chip_id) {
 	case DOC_CHIPID_G3:
-		mtd->name = kasprintf(GFP_KERNEL, "DiskOnChip G3 floor %d",
+		mtd->name = kasprintf(GFP_KERNEL, "docg3.%d",
 				      docg3->device_id);
 		docg3->max_block = 2047;
 		break;
@@ -1817,16 +1838,17 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 	mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
 	if (docg3->reliable == 2)
 		mtd->erasesize /= 2;
-	mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
+	mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
 	mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
 	mtd->owner = THIS_MODULE;
-	mtd->erase = doc_erase;
-	mtd->read = doc_read;
-	mtd->write = doc_write;
-	mtd->read_oob = doc_read_oob;
-	mtd->write_oob = doc_write_oob;
-	mtd->block_isbad = doc_block_isbad;
+	mtd->_erase = doc_erase;
+	mtd->_read = doc_read;
+	mtd->_write = doc_write;
+	mtd->_read_oob = doc_read_oob;
+	mtd->_write_oob = doc_write_oob;
+	mtd->_block_isbad = doc_block_isbad;
 	mtd->ecclayout = &docg3_oobinfo;
+	mtd->ecc_strength = DOC_ECC_BCH_T;
 }
 
 /**
@@ -1834,6 +1856,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
  * @base: the io space where the device is probed
  * @floor: the floor of the probed device
  * @dev: the device
+ * @cascade: the cascade of chips this devices will belong to
  *
  * Checks whether a device at the specified IO range, and floor is available.
  *
@@ -1841,8 +1864,8 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
  * if a memory allocation failed. If floor 0 is checked, a reset of the ASIC is
  * launched.
  */
-static struct mtd_info *doc_probe_device(void __iomem *base, int floor,
-					 struct device *dev)
+static struct mtd_info * __init
+doc_probe_device(struct docg3_cascade *cascade, int floor, struct device *dev)
 {
 	int ret, bbt_nbpages;
 	u16 chip_id, chip_id_inv;
@@ -1865,7 +1888,7 @@ static struct mtd_info *doc_probe_device(void __iomem *base, int floor,
 
 	docg3->dev = dev;
 	docg3->device_id = floor;
-	docg3->base = base;
+	docg3->cascade = cascade;
 	doc_set_device_id(docg3, docg3->device_id);
 	if (!floor)
 		doc_set_asic_mode(docg3, DOC_ASICMODE_RESET);
@@ -1882,7 +1905,7 @@ static struct mtd_info *doc_probe_device(void __iomem *base, int floor,
 	switch (chip_id) {
 	case DOC_CHIPID_G3:
 		doc_info("Found a G3 DiskOnChip at addr %p, floor %d\n",
-			 base, floor);
+			 docg3->cascade->base, floor);
 		break;
 	default:
 		doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id);
@@ -1927,10 +1950,12 @@ static void doc_release_device(struct mtd_info *mtd)
 static int docg3_resume(struct platform_device *pdev)
 {
 	int i;
+	struct docg3_cascade *cascade;
 	struct mtd_info **docg3_floors, *mtd;
 	struct docg3 *docg3;
 
-	docg3_floors = platform_get_drvdata(pdev);
+	cascade = platform_get_drvdata(pdev);
+	docg3_floors = cascade->floors;
 	mtd = docg3_floors[0];
 	docg3 = mtd->priv;
 
@@ -1952,11 +1977,13 @@ static int docg3_resume(struct platform_device *pdev)
 static int docg3_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	int floor, i;
+	struct docg3_cascade *cascade;
 	struct mtd_info **docg3_floors, *mtd;
 	struct docg3 *docg3;
 	u8 ctrl, pwr_down;
 
-	docg3_floors = platform_get_drvdata(pdev);
+	cascade = platform_get_drvdata(pdev);
+	docg3_floors = cascade->floors;
 	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
 		mtd = docg3_floors[floor];
 		if (!mtd)
@@ -2006,7 +2033,7 @@ static int __init docg3_probe(struct platform_device *pdev)
 	struct resource *ress;
 	void __iomem *base;
 	int ret, floor, found = 0;
-	struct mtd_info **docg3_floors;
+	struct docg3_cascade *cascade;
 
 	ret = -ENXIO;
 	ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -2017,17 +2044,19 @@ static int __init docg3_probe(struct platform_device *pdev)
 	base = ioremap(ress->start, DOC_IOSPACE_SIZE);
 
 	ret = -ENOMEM;
-	docg3_floors = kzalloc(sizeof(*docg3_floors) * DOC_MAX_NBFLOORS,
-			       GFP_KERNEL);
-	if (!docg3_floors)
+	cascade = kzalloc(sizeof(*cascade) * DOC_MAX_NBFLOORS,
+			  GFP_KERNEL);
+	if (!cascade)
 		goto nomem1;
-	docg3_bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T,
+	cascade->base = base;
+	mutex_init(&cascade->lock);
+	cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T,
 			     DOC_ECC_BCH_PRIMPOLY);
-	if (!docg3_bch)
+	if (!cascade->bch)
 		goto nomem2;
 
 	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
-		mtd = doc_probe_device(base, floor, dev);
+		mtd = doc_probe_device(cascade, floor, dev);
 		if (IS_ERR(mtd)) {
 			ret = PTR_ERR(mtd);
 			goto err_probe;
@@ -2038,7 +2067,7 @@ static int __init docg3_probe(struct platform_device *pdev)
 			else
 				continue;
 		}
-		docg3_floors[floor] = mtd;
+		cascade->floors[floor] = mtd;
 		ret = mtd_device_parse_register(mtd, part_probes, NULL, NULL,
 						0);
 		if (ret)
@@ -2046,26 +2075,26 @@ static int __init docg3_probe(struct platform_device *pdev)
 		found++;
 	}
 
-	ret = doc_register_sysfs(pdev, docg3_floors);
+	ret = doc_register_sysfs(pdev, cascade);
 	if (ret)
 		goto err_probe;
 	if (!found)
 		goto notfound;
 
-	platform_set_drvdata(pdev, docg3_floors);
-	doc_dbg_register(docg3_floors[0]->priv);
+	platform_set_drvdata(pdev, cascade);
+	doc_dbg_register(cascade->floors[0]->priv);
 	return 0;
 
 notfound:
 	ret = -ENODEV;
 	dev_info(dev, "No supported DiskOnChip found\n");
 err_probe:
-	free_bch(docg3_bch);
+	kfree(cascade->bch);
 	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
-		if (docg3_floors[floor])
-			doc_release_device(docg3_floors[floor]);
+		if (cascade->floors[floor])
+			doc_release_device(cascade->floors[floor]);
 nomem2:
-	kfree(docg3_floors);
+	kfree(cascade);
 nomem1:
 	iounmap(base);
 noress:
@@ -2080,19 +2109,19 @@ noress:
  */
 static int __exit docg3_release(struct platform_device *pdev)
 {
-	struct mtd_info **docg3_floors = platform_get_drvdata(pdev);
-	struct docg3 *docg3 = docg3_floors[0]->priv;
-	void __iomem *base = docg3->base;
+	struct docg3_cascade *cascade = platform_get_drvdata(pdev);
+	struct docg3 *docg3 = cascade->floors[0]->priv;
+	void __iomem *base = cascade->base;
 	int floor;
 
-	doc_unregister_sysfs(pdev, docg3_floors);
+	doc_unregister_sysfs(pdev, cascade);
 	doc_dbg_unregister(docg3);
 	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
-		if (docg3_floors[floor])
-			doc_release_device(docg3_floors[floor]);
+		if (cascade->floors[floor])
+			doc_release_device(cascade->floors[floor]);
 
-	kfree(docg3_floors);
-	free_bch(docg3_bch);
+	free_bch(docg3->cascade->bch);
+	kfree(cascade);
 	iounmap(base);
 	return 0;
 }

drivers/mtd/devices/docg3.h

@@ -22,6 +22,8 @@
 #ifndef _MTD_DOCG3_H
 #define _MTD_DOCG3_H
 
+#include <linux/mtd/mtd.h>
+
 /*
  * Flash memory areas :
  *   - 0x0000 .. 0x07ff : IPL
@@ -266,10 +268,24 @@
  */
 #define DOC_LAYOUT_DPS_KEY_LENGTH	8
 
+/**
+ * struct docg3_cascade - Cascade of 1 to 4 docg3 chips
+ * @floors: floors (ie. one physical docg3 chip is one floor)
+ * @base: IO space to access all chips in the cascade
+ * @bch: the BCH correcting control structure
+ * @lock: lock to protect docg3 IO space from concurrent accesses
+ */
+struct docg3_cascade {
+	struct mtd_info *floors[DOC_MAX_NBFLOORS];
+	void __iomem *base;
+	struct bch_control *bch;
+	struct mutex lock;
+};
+
 /**
  * struct docg3 - DiskOnChip driver private data
  * @dev: the device currently under control
- * @base: mapped IO space
+ * @cascade: the cascade this device belongs to
  * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
  * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
 
@@ -287,7 +303,7 @@
  */
 struct docg3 {
 	struct device *dev;
-	void __iomem *base;
+	struct docg3_cascade *cascade;
 	unsigned int device_id:4;
 	unsigned int if_cfg:1;
 	unsigned int reliable:2;

drivers/mtd/devices/lart.c

@@ -367,9 +367,6 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
    printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n", __func__, instr->addr, instr->len);
 #endif
 
-   /* sanity checks */
-   if (instr->addr + instr->len > mtd->size) return (-EINVAL);
-
    /*
 	* check that both start and end of the requested erase are
 	* aligned with the erasesize at the appropriate addresses.
@@ -440,10 +437,6 @@ static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retle
    printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n", __func__, (__u32)from, len);
 #endif
 
-   /* sanity checks */
-   if (!len) return (0);
-   if (from + len > mtd->size) return (-EINVAL);
-
    /* we always read len bytes */
    *retlen = len;
 
@@ -522,11 +515,8 @@ static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen
    printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n", __func__, (__u32)to, len);
 #endif
 
-   *retlen = 0;
-
    /* sanity checks */
    if (!len) return (0);
-   if (to + len > mtd->size) return (-EINVAL);
 
    /* first, we write a 0xFF.... padded byte until we reach a dword boundary */
    if (to & (BUSWIDTH - 1))
@@ -630,14 +620,15 @@ static int __init lart_flash_init (void)
    mtd.name = module_name;
    mtd.type = MTD_NORFLASH;
    mtd.writesize = 1;
+   mtd.writebufsize = 4;
    mtd.flags = MTD_CAP_NORFLASH;
    mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
    mtd.erasesize = FLASH_BLOCKSIZE_MAIN;
    mtd.numeraseregions = ARRAY_SIZE(erase_regions);
    mtd.eraseregions = erase_regions;
-   mtd.erase = flash_erase;
-   mtd.read = flash_read;
-   mtd.write = flash_write;
+   mtd._erase = flash_erase;
+   mtd._read = flash_read;
+   mtd._write = flash_write;
    mtd.owner = THIS_MODULE;
 
 #ifdef LART_DEBUG

drivers/mtd/devices/m25p80.c

@@ -288,9 +288,6 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
 			__func__, (long long)instr->addr,
 			(long long)instr->len);
 
-	/* sanity checks */
-	if (instr->addr + instr->len > flash->mtd.size)
-		return -EINVAL;
 	div_u64_rem(instr->len, mtd->erasesize, &rem);
 	if (rem)
 		return -EINVAL;
@@ -349,13 +346,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 	pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
 			__func__, (u32)from, len);
 
-	/* sanity checks */
-	if (!len)
-		return 0;
-
-	if (from + len > flash->mtd.size)
-		return -EINVAL;
-
 	spi_message_init(&m);
 	memset(t, 0, (sizeof t));
 
@@ -371,9 +361,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 	t[1].len = len;
 	spi_message_add_tail(&t[1], &m);
 
-	/* Byte count starts at zero. */
-	*retlen = 0;
-
 	mutex_lock(&flash->lock);
 
 	/* Wait till previous write/erase is done. */
@@ -417,15 +404,6 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 	pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
 			__func__, (u32)to, len);
 
-	*retlen = 0;
-
-	/* sanity checks */
-	if (!len)
-		return(0);
-
-	if (to + len > flash->mtd.size)
-		return -EINVAL;
-
 	spi_message_init(&m);
 	memset(t, 0, (sizeof t));
 
@@ -509,15 +487,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 	pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
 			__func__, (u32)to, len);
 
-	*retlen = 0;
-
-	/* sanity checks */
-	if (!len)
-		return 0;
-
-	if (to + len > flash->mtd.size)
-		return -EINVAL;
-
 	spi_message_init(&m);
 	memset(t, 0, (sizeof t));
 
@@ -908,14 +877,14 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	flash->mtd.writesize = 1;
 	flash->mtd.flags = MTD_CAP_NORFLASH;
 	flash->mtd.size = info->sector_size * info->n_sectors;
-	flash->mtd.erase = m25p80_erase;
-	flash->mtd.read = m25p80_read;
+	flash->mtd._erase = m25p80_erase;
+	flash->mtd._read = m25p80_read;
 
 	/* sst flash chips use AAI word program */
 	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST)
-		flash->mtd.write = sst_write;
+		flash->mtd._write = sst_write;
 	else
-		flash->mtd.write = m25p80_write;
+		flash->mtd._write = m25p80_write;
 
 	/* prefer "small sector" erase if possible */
 	if (info->flags & SECT_4K) {
@@ -932,6 +901,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	ppdata.of_node = spi->dev.of_node;
 	flash->mtd.dev.parent = &spi->dev;
 	flash->page_size = info->page_size;
+	flash->mtd.writebufsize = flash->page_size;
 
 	if (info->addr_width)
 		flash->addr_width = info->addr_width;
@@ -1004,21 +974,7 @@ static struct spi_driver m25p80_driver = {
 	 */
 };
 
-
-static int __init m25p80_init(void)
-{
-	return spi_register_driver(&m25p80_driver);
-}
-
-
-static void __exit m25p80_exit(void)
-{
-	spi_unregister_driver(&m25p80_driver);
-}
-
-
-module_init(m25p80_init);
-module_exit(m25p80_exit);
+module_spi_driver(m25p80_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Mike Lavender");

drivers/mtd/devices/ms02-nv.c

@@ -59,12 +59,8 @@ static int ms02nv_read(struct mtd_info *mtd, loff_t from,
 {
 	struct ms02nv_private *mp = mtd->priv;
 
-	if (from + len > mtd->size)
-		return -EINVAL;
-
 	memcpy(buf, mp->uaddr + from, len);
 	*retlen = len;
-
 	return 0;
 }
 
@@ -73,12 +69,8 @@ static int ms02nv_write(struct mtd_info *mtd, loff_t to,
 {
 	struct ms02nv_private *mp = mtd->priv;
 
-	if (to + len > mtd->size)
-		return -EINVAL;
-
 	memcpy(mp->uaddr + to, buf, len);
 	*retlen = len;
-
 	return 0;
 }
 
@@ -215,8 +207,8 @@ static int __init ms02nv_init_one(ulong addr)
 	mtd->size = fixsize;
 	mtd->name = (char *)ms02nv_name;
 	mtd->owner = THIS_MODULE;
-	mtd->read = ms02nv_read;
-	mtd->write = ms02nv_write;
+	mtd->_read = ms02nv_read;
+	mtd->_write = ms02nv_write;
 	mtd->writesize = 1;
 
 	ret = -EIO;

drivers/mtd/devices/mtd_dataflash.c

@@ -164,9 +164,6 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 	      dev_name(&spi->dev), (long long)instr->addr,
 	      (long long)instr->len);
 
-	/* Sanity checks */
-	if (instr->addr + instr->len > mtd->size)
-		return -EINVAL;
 	div_u64_rem(instr->len, priv->page_size, &rem);
 	if (rem)
 		return -EINVAL;
@@ -252,14 +249,6 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev),
 			(unsigned)from, (unsigned)(from + len));
 
-	*retlen = 0;
-
-	/* Sanity checks */
-	if (!len)
-		return 0;
-	if (from + len > mtd->size)
-		return -EINVAL;
-
 	/* Calculate flash page/byte address */
 	addr = (((unsigned)from / priv->page_size) << priv->page_offset)
 		+ ((unsigned)from % priv->page_size);
@@ -328,14 +317,6 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	pr_debug("%s: write 0x%x..0x%x\n",
 		dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
 
-	*retlen = 0;
-
-	/* Sanity checks */
-	if (!len)
-		return 0;
-	if ((to + len) > mtd->size)
-		return -EINVAL;
-
 	spi_message_init(&msg);
 
 	x[0].tx_buf = command = priv->command;
@@ -490,8 +471,6 @@ static ssize_t otp_read(struct spi_device *spi, unsigned base,
 
 	if ((off + len) > 64)
 		len = 64 - off;
-	if (len == 0)
-		return len;
 
 	spi_message_init(&m);
 
@@ -611,16 +590,16 @@ static int dataflash_write_user_otp(struct mtd_info *mtd,
 
 static char *otp_setup(struct mtd_info *device, char revision)
 {
-	device->get_fact_prot_info = dataflash_get_otp_info;
-	device->read_fact_prot_reg = dataflash_read_fact_otp;
-	device->get_user_prot_info = dataflash_get_otp_info;
-	device->read_user_prot_reg = dataflash_read_user_otp;
+	device->_get_fact_prot_info = dataflash_get_otp_info;
+	device->_read_fact_prot_reg = dataflash_read_fact_otp;
+	device->_get_user_prot_info = dataflash_get_otp_info;
+	device->_read_user_prot_reg = dataflash_read_user_otp;
 
 	/* rev c parts (at45db321c and at45db1281 only!) use a
 	 * different write procedure; not (yet?) implemented.
 	 */
 	if (revision > 'c')
-		device->write_user_prot_reg = dataflash_write_user_otp;
+		device->_write_user_prot_reg = dataflash_write_user_otp;
 
 	return ", OTP";
 }
@@ -672,9 +651,9 @@ add_dataflash_otp(struct spi_device *spi, char *name,
 	device->owner = THIS_MODULE;
 	device->type = MTD_DATAFLASH;
 	device->flags = MTD_WRITEABLE;
-	device->erase = dataflash_erase;
-	device->read = dataflash_read;
-	device->write = dataflash_write;
+	device->_erase = dataflash_erase;
+	device->_read = dataflash_read;
+	device->_write = dataflash_write;
 	device->priv = priv;
 
 	device->dev.parent = &spi->dev;
@@ -946,18 +925,7 @@ static struct spi_driver dataflash_driver = {
 	/* FIXME:  investigate suspend and resume... */
 };
 
-static int __init dataflash_init(void)
-{
-	return spi_register_driver(&dataflash_driver);
-}
-module_init(dataflash_init);
-
-static void __exit dataflash_exit(void)
-{
-	spi_unregister_driver(&dataflash_driver);
-}
-module_exit(dataflash_exit);
-
+module_spi_driver(dataflash_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Andrew Victor, David Brownell");

drivers/mtd/devices/mtdram.c

@@ -34,34 +34,23 @@ static struct mtd_info *mtd_info;
 
 static int ram_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
-	if (instr->addr + instr->len > mtd->size)
-		return -EINVAL;
-
 	memset((char *)mtd->priv + instr->addr, 0xff, instr->len);
-
 	instr->state = MTD_ERASE_DONE;
 	mtd_erase_callback(instr);
-
 	return 0;
 }
 
 static int ram_point(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, void **virt, resource_size_t *phys)
 {
-	if (from + len > mtd->size)
-		return -EINVAL;
-
-	/* can we return a physical address with this driver? */
-	if (phys)
-		return -EINVAL;
-
 	*virt = mtd->priv + from;
 	*retlen = len;
 	return 0;
 }
 
-static void ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
+	return 0;
 }
 
 /*
@@ -80,11 +69,7 @@ static unsigned long ram_get_unmapped_area(struct mtd_info *mtd,
 static int ram_read(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, u_char *buf)
 {
-	if (from + len > mtd->size)
-		return -EINVAL;
-
 	memcpy(buf, mtd->priv + from, len);
-
 	*retlen = len;
 	return 0;
 }
@@ -92,11 +77,7 @@ static int ram_read(struct mtd_info *mtd, loff_t from, size_t len,
 static int ram_write(struct mtd_info *mtd, loff_t to, size_t len,
 		size_t *retlen, const u_char *buf)
 {
-	if (to + len > mtd->size)
-		return -EINVAL;
-
 	memcpy((char *)mtd->priv + to, buf, len);
-
 	*retlen = len;
 	return 0;
 }
@@ -126,12 +107,12 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
 	mtd->priv = mapped_address;
 
 	mtd->owner = THIS_MODULE;
-	mtd->erase = ram_erase;
-	mtd->point = ram_point;
-	mtd->unpoint = ram_unpoint;
-	mtd->get_unmapped_area = ram_get_unmapped_area;
-	mtd->read = ram_read;
-	mtd->write = ram_write;
+	mtd->_erase = ram_erase;
+	mtd->_point = ram_point;
+	mtd->_unpoint = ram_unpoint;
+	mtd->_get_unmapped_area = ram_get_unmapped_area;
+	mtd->_read = ram_read;
+	mtd->_write = ram_write;
 
 	if (mtd_device_register(mtd, NULL, 0))
 		return -EIO;

drivers/mtd/devices/phram.c

@@ -33,45 +33,33 @@ struct phram_mtd_list {
 
 static LIST_HEAD(phram_list);
 
-
 static int phram_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	u_char *start = mtd->priv;
 
-	if (instr->addr + instr->len > mtd->size)
-		return -EINVAL;
-
 	memset(start + instr->addr, 0xff, instr->len);
 
-	/* This'll catch a few races. Free the thing before returning :)
+	/*
+	 * This'll catch a few races. Free the thing before returning :)
 	 * I don't feel at all ashamed. This kind of thing is possible anyway
 	 * with flash, but unlikely.
 	 */
-
 	instr->state = MTD_ERASE_DONE;
-
 	mtd_erase_callback(instr);
-
 	return 0;
 }
 
 static int phram_point(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, void **virt, resource_size_t *phys)
 {
-	if (from + len > mtd->size)
-		return -EINVAL;
-
-	/* can we return a physical address with this driver? */
-	if (phys)
-		return -EINVAL;
-
 	*virt = mtd->priv + from;
 	*retlen = len;
 	return 0;
 }
 
-static void phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
+	return 0;
 }
 
 static int phram_read(struct mtd_info *mtd, loff_t from, size_t len,
@@ -79,14 +67,7 @@ static int phram_read(struct mtd_info *mtd, loff_t from, size_t len,
 {
 	u_char *start = mtd->priv;
 
-	if (from >= mtd->size)
-		return -EINVAL;
-
-	if (len > mtd->size - from)
-		len = mtd->size - from;
-
 	memcpy(buf, start + from, len);
-
 	*retlen = len;
 	return 0;
 }
@@ -96,20 +77,11 @@ static int phram_write(struct mtd_info *mtd, loff_t to, size_t len,
 {
 	u_char *start = mtd->priv;
 
-	if (to >= mtd->size)
-		return -EINVAL;
-
-	if (len > mtd->size - to)
-		len = mtd->size - to;
-
 	memcpy(start + to, buf, len);
-
 	*retlen = len;
 	return 0;
 }
 
-
-
 static void unregister_devices(void)
 {
 	struct phram_mtd_list *this, *safe;
@@ -142,11 +114,11 @@ static int register_device(char *name, unsigned long start, unsigned long len)
 	new->mtd.name = name;
 	new->mtd.size = len;
 	new->mtd.flags = MTD_CAP_RAM;
-        new->mtd.erase = phram_erase;
-	new->mtd.point = phram_point;
-	new->mtd.unpoint = phram_unpoint;
-	new->mtd.read = phram_read;
-	new->mtd.write = phram_write;
+	new->mtd._erase = phram_erase;
+	new->mtd._point = phram_point;
+	new->mtd._unpoint = phram_unpoint;
+	new->mtd._read = phram_read;
+	new->mtd._write = phram_write;
 	new->mtd.owner = THIS_MODULE;
 	new->mtd.type = MTD_RAM;
 	new->mtd.erasesize = PAGE_SIZE;
@@ -233,7 +205,17 @@ static inline void kill_final_newline(char *str)
 	return 1;		\
 } while (0)
 
-static int phram_setup(const char *val, struct kernel_param *kp)
+/*
+ * This shall contain the module parameter if any. It is of the form:
+ * - phram=<device>,<address>,<size> for module case
+ * - phram.phram=<device>,<address>,<size> for built-in case
+ * We leave 64 bytes for the device name, 12 for the address and 12 for the
+ * size.
+ * Example: phram.phram=rootfs,0xa0000000,512Mi
+ */
+static __initdata char phram_paramline[64+12+12];
+
+static int __init phram_setup(const char *val)
 {
 	char buf[64+12+12], *str = buf;
 	char *token[3];
@@ -282,12 +264,28 @@ static int phram_setup(const char *val, struct kernel_param *kp)
 	return ret;
 }
 
-module_param_call(phram, phram_setup, NULL, NULL, 000);
+static int __init phram_param_call(const char *val, struct kernel_param *kp)
+{
+	/*
+	 * This function is always called before 'init_phram()', whether
+	 * built-in or module.
+	 */
+	if (strlen(val) >= sizeof(phram_paramline))
+		return -ENOSPC;
+	strcpy(phram_paramline, val);
+
+	return 0;
+}
+
+module_param_call(phram, phram_param_call, NULL, NULL, 000);
 MODULE_PARM_DESC(phram, "Memory region to map. \"phram=<name>,<start>,<length>\"");
 
 
 static int __init init_phram(void)
 {
+	if (phram_paramline[0])
+		return phram_setup(phram_paramline);
+
 	return 0;
 }
 

drivers/mtd/devices/pmc551.c

@@ -94,12 +94,48 @@
 #include <linux/ioctl.h>
 #include <asm/io.h>
 #include <linux/pci.h>
-
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/pmc551.h>
+
+#define PMC551_VERSION \
+	"Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n"
+
+#define PCI_VENDOR_ID_V3_SEMI 0x11b0
+#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200
+
+#define PMC551_PCI_MEM_MAP0 0x50
+#define PMC551_PCI_MEM_MAP1 0x54
+#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000
+#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0
+#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002
+#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001
+
+#define PMC551_SDRAM_MA  0x60
+#define PMC551_SDRAM_CMD 0x62
+#define PMC551_DRAM_CFG  0x64
+#define PMC551_SYS_CTRL_REG 0x78
+
+#define PMC551_DRAM_BLK0 0x68
+#define PMC551_DRAM_BLK1 0x6c
+#define PMC551_DRAM_BLK2 0x70
+#define PMC551_DRAM_BLK3 0x74
+#define PMC551_DRAM_BLK_GET_SIZE(x) (524288 << ((x >> 4) & 0x0f))
+#define PMC551_DRAM_BLK_SET_COL_MUX(x, v) (((x) & ~0x00007000) | (((v) & 0x7) << 12))
+#define PMC551_DRAM_BLK_SET_ROW_MUX(x, v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8))
+
+struct mypriv {
+	struct pci_dev *dev;
+	u_char *start;
+	u32 base_map0;
+	u32 curr_map0;
+	u32 asize;
+	struct mtd_info *nextpmc551;
+};
 
 static struct mtd_info *pmc551list;
 
+static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, void **virt, resource_size_t *phys);
+
 static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct mypriv *priv = mtd->priv;
@@ -115,16 +151,6 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
 #endif
 
 	end = instr->addr + instr->len - 1;
-
-	/* Is it past the end? */
-	if (end > mtd->size) {
-#ifdef CONFIG_MTD_PMC551_DEBUG
-		printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n",
-			(long)end, (long)mtd->size);
-#endif
-		return -EINVAL;
-	}
-
 	eoff_hi = end & ~(priv->asize - 1);
 	soff_hi = instr->addr & ~(priv->asize - 1);
 	eoff_lo = end & (priv->asize - 1);
@@ -178,18 +204,6 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
 	printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len);
 #endif
 
-	if (from + len > mtd->size) {
-#ifdef CONFIG_MTD_PMC551_DEBUG
-		printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n",
-			(long)from + len, (long)mtd->size);
-#endif
-		return -EINVAL;
-	}
-
-	/* can we return a physical address with this driver? */
-	if (phys)
-		return -EINVAL;
-
 	soff_hi = from & ~(priv->asize - 1);
 	soff_lo = from & (priv->asize - 1);
 
@@ -205,11 +219,12 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
 	return 0;
 }
 
-static void pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 #ifdef CONFIG_MTD_PMC551_DEBUG
 	printk(KERN_DEBUG "pmc551_unpoint()\n");
 #endif
+	return 0;
 }
 
 static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
@@ -228,16 +243,6 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
 #endif
 
 	end = from + len - 1;
-
-	/* Is it past the end? */
-	if (end > mtd->size) {
-#ifdef CONFIG_MTD_PMC551_DEBUG
-		printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n",
-			(long)end, (long)mtd->size);
-#endif
-		return -EINVAL;
-	}
-
 	soff_hi = from & ~(priv->asize - 1);
 	eoff_hi = end & ~(priv->asize - 1);
 	soff_lo = from & (priv->asize - 1);
@@ -295,16 +300,6 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
 #endif
 
 	end = to + len - 1;
-	/* Is it past the end?  or did the u32 wrap? */
-	if (end > mtd->size) {
-#ifdef CONFIG_MTD_PMC551_DEBUG
-		printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, "
-			"size: %ld, to: %ld)\n", (long)end, (long)mtd->size,
-			(long)to);
-#endif
-		return -EINVAL;
-	}
-
 	soff_hi = to & ~(priv->asize - 1);
 	eoff_hi = end & ~(priv->asize - 1);
 	soff_lo = to & (priv->asize - 1);
@@ -358,7 +353,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
  * mechanism
  * returns the size of the memory region found.
  */
-static u32 fixup_pmc551(struct pci_dev *dev)
+static int fixup_pmc551(struct pci_dev *dev)
 {
 #ifdef CONFIG_MTD_PMC551_BUGFIX
 	u32 dram_data;
@@ -668,7 +663,7 @@ static int __init init_pmc551(void)
 	struct mypriv *priv;
 	int found = 0;
 	struct mtd_info *mtd;
-	u32 length = 0;
+	int length = 0;
 
 	if (msize) {
 		msize = (1 << (ffs(msize) - 1)) << 20;
@@ -786,11 +781,11 @@ static int __init init_pmc551(void)
 
 		mtd->size = msize;
 		mtd->flags = MTD_CAP_RAM;
-		mtd->erase = pmc551_erase;
-		mtd->read = pmc551_read;
-		mtd->write = pmc551_write;
-		mtd->point = pmc551_point;
-		mtd->unpoint = pmc551_unpoint;
+		mtd->_erase = pmc551_erase;
+		mtd->_read = pmc551_read;
+		mtd->_write = pmc551_write;
+		mtd->_point = pmc551_point;
+		mtd->_unpoint = pmc551_unpoint;
 		mtd->type = MTD_RAM;
 		mtd->name = "PMC551 RAM board";
 		mtd->erasesize = 0x10000;

drivers/mtd/devices/slram.c

@@ -75,7 +75,7 @@ static slram_mtd_list_t *slram_mtdlist = NULL;
 static int slram_erase(struct mtd_info *, struct erase_info *);
 static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **,
 		resource_size_t *);
-static void slram_unpoint(struct mtd_info *, loff_t, size_t);
+static int slram_unpoint(struct mtd_info *, loff_t, size_t);
 static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 
@@ -83,21 +83,13 @@ static int slram_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	slram_priv_t *priv = mtd->priv;
 
-	if (instr->addr + instr->len > mtd->size) {
-		return(-EINVAL);
-	}
-
 	memset(priv->start + instr->addr, 0xff, instr->len);
-
 	/* This'll catch a few races. Free the thing before returning :)
 	 * I don't feel at all ashamed. This kind of thing is possible anyway
 	 * with flash, but unlikely.
 	 */
-
 	instr->state = MTD_ERASE_DONE;
-
 	mtd_erase_callback(instr);
-
 	return(0);
 }
 
@@ -106,20 +98,14 @@ static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
 {
 	slram_priv_t *priv = mtd->priv;
 
-	/* can we return a physical address with this driver? */
-	if (phys)
-		return -EINVAL;
-
-	if (from + len > mtd->size)
-		return -EINVAL;
-
 	*virt = priv->start + from;
 	*retlen = len;
 	return(0);
 }
 
-static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
+	return 0;
 }
 
 static int slram_read(struct mtd_info *mtd, loff_t from, size_t len,
@@ -127,14 +113,7 @@ static int slram_read(struct mtd_info *mtd, loff_t from, size_t len,
 {
 	slram_priv_t *priv = mtd->priv;
 
-	if (from > mtd->size)
-		return -EINVAL;
-
-	if (from + len > mtd->size)
-		len = mtd->size - from;
-
 	memcpy(buf, priv->start + from, len);
-
 	*retlen = len;
 	return(0);
 }
@@ -144,11 +123,7 @@ static int slram_write(struct mtd_info *mtd, loff_t to, size_t len,
 {
 	slram_priv_t *priv = mtd->priv;
 
-	if (to + len > mtd->size)
-		return -EINVAL;
-
 	memcpy(priv->start + to, buf, len);
-
 	*retlen = len;
 	return(0);
 }
@@ -199,11 +174,11 @@ static int register_device(char *name, unsigned long start, unsigned long length
 	(*curmtd)->mtdinfo->name = name;
 	(*curmtd)->mtdinfo->size = length;
 	(*curmtd)->mtdinfo->flags = MTD_CAP_RAM;
-        (*curmtd)->mtdinfo->erase = slram_erase;
-	(*curmtd)->mtdinfo->point = slram_point;
-	(*curmtd)->mtdinfo->unpoint = slram_unpoint;
-	(*curmtd)->mtdinfo->read = slram_read;
-	(*curmtd)->mtdinfo->write = slram_write;
+	(*curmtd)->mtdinfo->_erase = slram_erase;
+	(*curmtd)->mtdinfo->_point = slram_point;
+	(*curmtd)->mtdinfo->_unpoint = slram_unpoint;
+	(*curmtd)->mtdinfo->_read = slram_read;
+	(*curmtd)->mtdinfo->_write = slram_write;
 	(*curmtd)->mtdinfo->owner = THIS_MODULE;
 	(*curmtd)->mtdinfo->type = MTD_RAM;
 	(*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ;

drivers/mtd/devices/spear_smi.c

@@ -0,0 +1,1147 @@
+/*
+ * SMI (Serial Memory Controller) device driver for Serial NOR Flash on
+ * SPEAr platform
+ * The serial nor interface is largely based on drivers/mtd/m25p80.c,
+ * however the SPI interface has been replaced by SMI.
+ *
+ * Copyright © 2010 STMicroelectronics.
+ * Ashish Priyadarshi
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spear_smi.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+/* SMI clock rate */
+#define SMI_MAX_CLOCK_FREQ	50000000 /* 50 MHz */
+
+/* MAX time out to safely come out of a erase or write busy conditions */
+#define SMI_PROBE_TIMEOUT	(HZ / 10)
+#define SMI_MAX_TIME_OUT	(3 * HZ)
+
+/* timeout for command completion */
+#define SMI_CMD_TIMEOUT		(HZ / 10)
+
+/* registers of smi */
+#define SMI_CR1		0x0	/* SMI control register 1 */
+#define SMI_CR2		0x4	/* SMI control register 2 */
+#define SMI_SR		0x8	/* SMI status register */
+#define SMI_TR		0xC	/* SMI transmit register */
+#define SMI_RR		0x10	/* SMI receive register */
+
+/* defines for control_reg 1 */
+#define BANK_EN		(0xF << 0)	/* enables all banks */
+#define DSEL_TIME	(0x6 << 4)	/* Deselect time 6 + 1 SMI_CK periods */
+#define SW_MODE		(0x1 << 28)	/* enables SW Mode */
+#define WB_MODE		(0x1 << 29)	/* Write Burst Mode */
+#define FAST_MODE	(0x1 << 15)	/* Fast Mode */
+#define HOLD1		(0x1 << 16)	/* Clock Hold period selection */
+
+/* defines for control_reg 2 */
+#define SEND		(0x1 << 7)	/* Send data */
+#define TFIE		(0x1 << 8)	/* Transmission Flag Interrupt Enable */
+#define WCIE		(0x1 << 9)	/* Write Complete Interrupt Enable */
+#define RD_STATUS_REG	(0x1 << 10)	/* reads status reg */
+#define WE		(0x1 << 11)	/* Write Enable */
+
+#define TX_LEN_SHIFT	0
+#define RX_LEN_SHIFT	4
+#define BANK_SHIFT	12
+
+/* defines for status register */
+#define SR_WIP		0x1	/* Write in progress */
+#define SR_WEL		0x2	/* Write enable latch */
+#define SR_BP0		0x4	/* Block protect 0 */
+#define SR_BP1		0x8	/* Block protect 1 */
+#define SR_BP2		0x10	/* Block protect 2 */
+#define SR_SRWD		0x80	/* SR write protect */
+#define TFF		0x100	/* Transfer Finished Flag */
+#define WCF		0x200	/* Transfer Finished Flag */
+#define ERF1		0x400	/* Forbidden Write Request */
+#define ERF2		0x800	/* Forbidden Access */
+
+#define WM_SHIFT	12
+
+/* flash opcodes */
+#define OPCODE_RDID	0x9f	/* Read JEDEC ID */
+
+/* Flash Device Ids maintenance section */
+
+/* data structure to maintain flash ids from different vendors */
+struct flash_device {
+	char *name;
+	u8 erase_cmd;
+	u32 device_id;
+	u32 pagesize;
+	unsigned long sectorsize;
+	unsigned long size_in_bytes;
+};
+
+#define FLASH_ID(n, es, id, psize, ssize, size)	\
+{				\
+	.name = n,		\
+	.erase_cmd = es,	\
+	.device_id = id,	\
+	.pagesize = psize,	\
+	.sectorsize = ssize,	\
+	.size_in_bytes = size	\
+}
+
+static struct flash_device flash_devices[] = {
+	FLASH_ID("st m25p16"     , 0xd8, 0x00152020, 0x100, 0x10000, 0x200000),
+	FLASH_ID("st m25p32"     , 0xd8, 0x00162020, 0x100, 0x10000, 0x400000),
+	FLASH_ID("st m25p64"     , 0xd8, 0x00172020, 0x100, 0x10000, 0x800000),
+	FLASH_ID("st m25p128"    , 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000),
+	FLASH_ID("st m25p05"     , 0xd8, 0x00102020, 0x80 , 0x8000 , 0x10000),
+	FLASH_ID("st m25p10"     , 0xd8, 0x00112020, 0x80 , 0x8000 , 0x20000),
+	FLASH_ID("st m25p20"     , 0xd8, 0x00122020, 0x100, 0x10000, 0x40000),
+	FLASH_ID("st m25p40"     , 0xd8, 0x00132020, 0x100, 0x10000, 0x80000),
+	FLASH_ID("st m25p80"     , 0xd8, 0x00142020, 0x100, 0x10000, 0x100000),
+	FLASH_ID("st m45pe10"    , 0xd8, 0x00114020, 0x100, 0x10000, 0x20000),
+	FLASH_ID("st m45pe20"    , 0xd8, 0x00124020, 0x100, 0x10000, 0x40000),
+	FLASH_ID("st m45pe40"    , 0xd8, 0x00134020, 0x100, 0x10000, 0x80000),
+	FLASH_ID("st m45pe80"    , 0xd8, 0x00144020, 0x100, 0x10000, 0x100000),
+	FLASH_ID("sp s25fl004"   , 0xd8, 0x00120201, 0x100, 0x10000, 0x80000),
+	FLASH_ID("sp s25fl008"   , 0xd8, 0x00130201, 0x100, 0x10000, 0x100000),
+	FLASH_ID("sp s25fl016"   , 0xd8, 0x00140201, 0x100, 0x10000, 0x200000),
+	FLASH_ID("sp s25fl032"   , 0xd8, 0x00150201, 0x100, 0x10000, 0x400000),
+	FLASH_ID("sp s25fl064"   , 0xd8, 0x00160201, 0x100, 0x10000, 0x800000),
+	FLASH_ID("atmel 25f512"  , 0x52, 0x0065001F, 0x80 , 0x8000 , 0x10000),
+	FLASH_ID("atmel 25f1024" , 0x52, 0x0060001F, 0x100, 0x8000 , 0x20000),
+	FLASH_ID("atmel 25f2048" , 0x52, 0x0063001F, 0x100, 0x10000, 0x40000),
+	FLASH_ID("atmel 25f4096" , 0x52, 0x0064001F, 0x100, 0x10000, 0x80000),
+	FLASH_ID("atmel 25fs040" , 0xd7, 0x0004661F, 0x100, 0x10000, 0x80000),
+	FLASH_ID("mac 25l512"    , 0xd8, 0x001020C2, 0x010, 0x10000, 0x10000),
+	FLASH_ID("mac 25l1005"   , 0xd8, 0x001120C2, 0x010, 0x10000, 0x20000),
+	FLASH_ID("mac 25l2005"   , 0xd8, 0x001220C2, 0x010, 0x10000, 0x40000),
+	FLASH_ID("mac 25l4005"   , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000),
+	FLASH_ID("mac 25l4005a"  , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000),
+	FLASH_ID("mac 25l8005"   , 0xd8, 0x001420C2, 0x010, 0x10000, 0x100000),
+	FLASH_ID("mac 25l1605"   , 0xd8, 0x001520C2, 0x100, 0x10000, 0x200000),
+	FLASH_ID("mac 25l1605a"  , 0xd8, 0x001520C2, 0x010, 0x10000, 0x200000),
+	FLASH_ID("mac 25l3205"   , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000),
+	FLASH_ID("mac 25l3205a"  , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000),
+	FLASH_ID("mac 25l6405"   , 0xd8, 0x001720C2, 0x100, 0x10000, 0x800000),
+};
+
+/* Define spear specific structures */
+
+struct spear_snor_flash;
+
+/**
+ * struct spear_smi - Structure for SMI Device
+ *
+ * @clk: functional clock
+ * @status: current status register of SMI.
+ * @clk_rate: functional clock rate of SMI (default: SMI_MAX_CLOCK_FREQ)
+ * @lock: lock to prevent parallel access of SMI.
+ * @io_base: base address for registers of SMI.
+ * @pdev: platform device
+ * @cmd_complete: queue to wait for command completion of NOR-flash.
+ * @num_flashes: number of flashes actually present on board.
+ * @flash: separate structure for each Serial NOR-flash attached to SMI.
+ */
+struct spear_smi {
+	struct clk *clk;
+	u32 status;
+	unsigned long clk_rate;
+	struct mutex lock;
+	void __iomem *io_base;
+	struct platform_device *pdev;
+	wait_queue_head_t cmd_complete;
+	u32 num_flashes;
+	struct spear_snor_flash *flash[MAX_NUM_FLASH_CHIP];
+};
+
+/**
+ * struct spear_snor_flash - Structure for Serial NOR Flash
+ *
+ * @bank: Bank number(0, 1, 2, 3) for each NOR-flash.
+ * @dev_id: Device ID of NOR-flash.
+ * @lock: lock to manage flash read, write and erase operations
+ * @mtd: MTD info for each NOR-flash.
+ * @num_parts: Total number of partition in each bank of NOR-flash.
+ * @parts: Partition info for each bank of NOR-flash.
+ * @page_size: Page size of NOR-flash.
+ * @base_addr: Base address of NOR-flash.
+ * @erase_cmd: erase command may vary on different flash types
+ * @fast_mode: flash supports read in fast mode
+ */
+struct spear_snor_flash {
+	u32 bank;
+	u32 dev_id;
+	struct mutex lock;
+	struct mtd_info mtd;
+	u32 num_parts;
+	struct mtd_partition *parts;
+	u32 page_size;
+	void __iomem *base_addr;
+	u8 erase_cmd;
+	u8 fast_mode;
+};
+
+static inline struct spear_snor_flash *get_flash_data(struct mtd_info *mtd)
+{
+	return container_of(mtd, struct spear_snor_flash, mtd);
+}
+
+/**
+ * spear_smi_read_sr - Read status register of flash through SMI
+ * @dev: structure of SMI information.
+ * @bank: bank to which flash is connected
+ *
+ * This routine will return the status register of the flash chip present at the
+ * given bank.
+ */
+static int spear_smi_read_sr(struct spear_smi *dev, u32 bank)
+{
+	int ret;
+	u32 ctrlreg1;
+
+	mutex_lock(&dev->lock);
+	dev->status = 0; /* Will be set in interrupt handler */
+
+	ctrlreg1 = readl(dev->io_base + SMI_CR1);
+	/* program smi in hw mode */
+	writel(ctrlreg1 & ~(SW_MODE | WB_MODE), dev->io_base + SMI_CR1);
+
+	/* performing a rsr instruction in hw mode */
+	writel((bank << BANK_SHIFT) | RD_STATUS_REG | TFIE,
+			dev->io_base + SMI_CR2);
+
+	/* wait for tff */
+	ret = wait_event_interruptible_timeout(dev->cmd_complete,
+			dev->status & TFF, SMI_CMD_TIMEOUT);
+
+	/* copy dev->status (lower 16 bits) in order to release lock */
+	if (ret > 0)
+		ret = dev->status & 0xffff;
+	else
+		ret = -EIO;
+
+	/* restore the ctrl regs state */
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+	writel(0, dev->io_base + SMI_CR2);
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+/**
+ * spear_smi_wait_till_ready - wait till flash is ready
+ * @dev: structure of SMI information.
+ * @bank: flash corresponding to this bank
+ * @timeout: timeout for busy wait condition
+ *
+ * This routine checks for WIP (write in progress) bit in Status register
+ * If successful the routine returns 0 else -EBUSY
+ */
+static int spear_smi_wait_till_ready(struct spear_smi *dev, u32 bank,
+		unsigned long timeout)
+{
+	unsigned long finish;
+	int status;
+
+	finish = jiffies + timeout;
+	do {
+		status = spear_smi_read_sr(dev, bank);
+		if (status < 0)
+			continue; /* try till timeout */
+		else if (!(status & SR_WIP))
+			return 0;
+
+		cond_resched();
+	} while (!time_after_eq(jiffies, finish));
+
+	dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n");
+	return status;
+}
+
+/**
+ * spear_smi_int_handler - SMI Interrupt Handler.
+ * @irq: irq number
+ * @dev_id: structure of SMI device, embedded in dev_id.
+ *
+ * The handler clears all interrupt conditions and records the status in
+ * dev->status which is used by the driver later.
+ */
+static irqreturn_t spear_smi_int_handler(int irq, void *dev_id)
+{
+	u32 status = 0;
+	struct spear_smi *dev = dev_id;
+
+	status = readl(dev->io_base + SMI_SR);
+
+	if (unlikely(!status))
+		return IRQ_NONE;
+
+	/* clear all interrupt conditions */
+	writel(0, dev->io_base + SMI_SR);
+
+	/* copy the status register in dev->status */
+	dev->status |= status;
+
+	/* send the completion */
+	wake_up_interruptible(&dev->cmd_complete);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * spear_smi_hw_init - initializes the smi controller.
+ * @dev: structure of smi device
+ *
+ * this routine initializes the smi controller wit the default values
+ */
+static void spear_smi_hw_init(struct spear_smi *dev)
+{
+	unsigned long rate = 0;
+	u32 prescale = 0;
+	u32 val;
+
+	rate = clk_get_rate(dev->clk);
+
+	/* functional clock of smi */
+	prescale = DIV_ROUND_UP(rate, dev->clk_rate);
+
+	/*
+	 * setting the standard values, fast mode, prescaler for
+	 * SMI_MAX_CLOCK_FREQ (50MHz) operation and bank enable
+	 */
+	val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8);
+
+	mutex_lock(&dev->lock);
+	writel(val, dev->io_base + SMI_CR1);
+	mutex_unlock(&dev->lock);
+}
+
+/**
+ * get_flash_index - match chip id from a flash list.
+ * @flash_id: a valid nor flash chip id obtained from board.
+ *
+ * try to validate the chip id by matching from a list, if not found then simply
+ * returns negative. In case of success returns index in to the flash devices
+ * array.
+ */
+static int get_flash_index(u32 flash_id)
+{
+	int index;
+
+	/* Matches chip-id to entire list of 'serial-nor flash' ids */
+	for (index = 0; index < ARRAY_SIZE(flash_devices); index++) {
+		if (flash_devices[index].device_id == flash_id)
+			return index;
+	}
+
+	/* Memory chip is not listed and not supported */
+	return -ENODEV;
+}
+
+/**
+ * spear_smi_write_enable - Enable the flash to do write operation
+ * @dev: structure of SMI device
+ * @bank: enable write for flash connected to this bank
+ *
+ * Set write enable latch with Write Enable command.
+ * Returns 0 on success.
+ */
+static int spear_smi_write_enable(struct spear_smi *dev, u32 bank)
+{
+	int ret;
+	u32 ctrlreg1;
+
+	mutex_lock(&dev->lock);
+	dev->status = 0; /* Will be set in interrupt handler */
+
+	ctrlreg1 = readl(dev->io_base + SMI_CR1);
+	/* program smi in h/w mode */
+	writel(ctrlreg1 & ~SW_MODE, dev->io_base + SMI_CR1);
+
+	/* give the flash, write enable command */
+	writel((bank << BANK_SHIFT) | WE | TFIE, dev->io_base + SMI_CR2);
+
+	ret = wait_event_interruptible_timeout(dev->cmd_complete,
+			dev->status & TFF, SMI_CMD_TIMEOUT);
+
+	/* restore the ctrl regs state */
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+	writel(0, dev->io_base + SMI_CR2);
+
+	if (ret <= 0) {
+		ret = -EIO;
+		dev_err(&dev->pdev->dev,
+			"smi controller failed on write enable\n");
+	} else {
+		/* check whether write mode status is set for required bank */
+		if (dev->status & (1 << (bank + WM_SHIFT)))
+			ret = 0;
+		else {
+			dev_err(&dev->pdev->dev, "couldn't enable write\n");
+			ret = -EIO;
+		}
+	}
+
+	mutex_unlock(&dev->lock);
+	return ret;
+}
+
+static inline u32
+get_sector_erase_cmd(struct spear_snor_flash *flash, u32 offset)
+{
+	u32 cmd;
+	u8 *x = (u8 *)&cmd;
+
+	x[0] = flash->erase_cmd;
+	x[1] = offset >> 16;
+	x[2] = offset >> 8;
+	x[3] = offset;
+
+	return cmd;
+}
+
+/**
+ * spear_smi_erase_sector - erase one sector of flash
+ * @dev: structure of SMI information
+ * @command: erase command to be send
+ * @bank: bank to which this command needs to be send
+ * @bytes: size of command
+ *
+ * Erase one sector of flash memory at offset ``offset'' which is any
+ * address within the sector which should be erased.
+ * Returns 0 if successful, non-zero otherwise.
+ */
+static int spear_smi_erase_sector(struct spear_smi *dev,
+		u32 bank, u32 command, u32 bytes)
+{
+	u32 ctrlreg1 = 0;
+	int ret;
+
+	ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT);
+	if (ret)
+		return ret;
+
+	ret = spear_smi_write_enable(dev, bank);
+	if (ret)
+		return ret;
+
+	mutex_lock(&dev->lock);
+
+	ctrlreg1 = readl(dev->io_base + SMI_CR1);
+	writel((ctrlreg1 | SW_MODE) & ~WB_MODE, dev->io_base + SMI_CR1);
+
+	/* send command in sw mode */
+	writel(command, dev->io_base + SMI_TR);
+
+	writel((bank << BANK_SHIFT) | SEND | TFIE | (bytes << TX_LEN_SHIFT),
+			dev->io_base + SMI_CR2);
+
+	ret = wait_event_interruptible_timeout(dev->cmd_complete,
+			dev->status & TFF, SMI_CMD_TIMEOUT);
+
+	if (ret <= 0) {
+		ret = -EIO;
+		dev_err(&dev->pdev->dev, "sector erase failed\n");
+	} else
+		ret = 0; /* success */
+
+	/* restore ctrl regs */
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+	writel(0, dev->io_base + SMI_CR2);
+
+	mutex_unlock(&dev->lock);
+	return ret;
+}
+
+/**
+ * spear_mtd_erase - perform flash erase operation as requested by user
+ * @mtd: Provides the memory characteristics
+ * @e_info: Provides the erase information
+ *
+ * Erase an address range on the flash chip. The address range may extend
+ * one or more erase sectors. Return an error is there is a problem erasing.
+ */
+static int spear_mtd_erase(struct mtd_info *mtd, struct erase_info *e_info)
+{
+	struct spear_snor_flash *flash = get_flash_data(mtd);
+	struct spear_smi *dev = mtd->priv;
+	u32 addr, command, bank;
+	int len, ret;
+
+	if (!flash || !dev)
+		return -ENODEV;
+
+	bank = flash->bank;
+	if (bank > dev->num_flashes - 1) {
+		dev_err(&dev->pdev->dev, "Invalid Bank Num");
+		return -EINVAL;
+	}
+
+	addr = e_info->addr;
+	len = e_info->len;
+
+	mutex_lock(&flash->lock);
+
+	/* now erase sectors in loop */
+	while (len) {
+		command = get_sector_erase_cmd(flash, addr);
+		/* preparing the command for flash */
+		ret = spear_smi_erase_sector(dev, bank, command, 4);
+		if (ret) {
+			e_info->state = MTD_ERASE_FAILED;
+			mutex_unlock(&flash->lock);
+			return ret;
+		}
+		addr += mtd->erasesize;
+		len -= mtd->erasesize;
+	}
+
+	mutex_unlock(&flash->lock);
+	e_info->state = MTD_ERASE_DONE;
+	mtd_erase_callback(e_info);
+
+	return 0;
+}
+
+/**
+ * spear_mtd_read - performs flash read operation as requested by the user
+ * @mtd: MTD information of the memory bank
+ * @from: Address from which to start read
+ * @len: Number of bytes to be read
+ * @retlen: Fills the Number of bytes actually read
+ * @buf: Fills this after reading
+ *
+ * Read an address range from the flash chip. The address range
+ * may be any size provided it is within the physical boundaries.
+ * Returns 0 on success, non zero otherwise
+ */
+static int spear_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u8 *buf)
+{
+	struct spear_snor_flash *flash = get_flash_data(mtd);
+	struct spear_smi *dev = mtd->priv;
+	void *src;
+	u32 ctrlreg1, val;
+	int ret;
+
+	if (!flash || !dev)
+		return -ENODEV;
+
+	if (flash->bank > dev->num_flashes - 1) {
+		dev_err(&dev->pdev->dev, "Invalid Bank Num");
+		return -EINVAL;
+	}
+
+	/* select address as per bank number */
+	src = flash->base_addr + from;
+
+	mutex_lock(&flash->lock);
+
+	/* wait till previous write/erase is done. */
+	ret = spear_smi_wait_till_ready(dev, flash->bank, SMI_MAX_TIME_OUT);
+	if (ret) {
+		mutex_unlock(&flash->lock);
+		return ret;
+	}
+
+	mutex_lock(&dev->lock);
+	/* put smi in hw mode not wbt mode */
+	ctrlreg1 = val = readl(dev->io_base + SMI_CR1);
+	val &= ~(SW_MODE | WB_MODE);
+	if (flash->fast_mode)
+		val |= FAST_MODE;
+
+	writel(val, dev->io_base + SMI_CR1);
+
+	memcpy_fromio(buf, (u8 *)src, len);
+
+	/* restore ctrl reg1 */
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+	mutex_unlock(&dev->lock);
+
+	*retlen = len;
+	mutex_unlock(&flash->lock);
+
+	return 0;
+}
+
+static inline int spear_smi_cpy_toio(struct spear_smi *dev, u32 bank,
+		void *dest, const void *src, size_t len)
+{
+	int ret;
+	u32 ctrlreg1;
+
+	/* wait until finished previous write command. */
+	ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT);
+	if (ret)
+		return ret;
+
+	/* put smi in write enable */
+	ret = spear_smi_write_enable(dev, bank);
+	if (ret)
+		return ret;
+
+	/* put smi in hw, write burst mode */
+	mutex_lock(&dev->lock);
+
+	ctrlreg1 = readl(dev->io_base + SMI_CR1);
+	writel((ctrlreg1 | WB_MODE) & ~SW_MODE, dev->io_base + SMI_CR1);
+
+	memcpy_toio(dest, src, len);
+
+	writel(ctrlreg1, dev->io_base + SMI_CR1);
+
+	mutex_unlock(&dev->lock);
+	return 0;
+}
+
+/**
+ * spear_mtd_write - performs write operation as requested by the user.
+ * @mtd: MTD information of the memory bank.
+ * @to:	Address to write.
+ * @len: Number of bytes to be written.
+ * @retlen: Number of bytes actually wrote.
+ * @buf: Buffer from which the data to be taken.
+ *
+ * Write an address range to the flash chip. Data must be written in
+ * flash_page_size chunks. The address range may be any size provided
+ * it is within the physical boundaries.
+ * Returns 0 on success, non zero otherwise
+ */
+static int spear_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u8 *buf)
+{
+	struct spear_snor_flash *flash = get_flash_data(mtd);
+	struct spear_smi *dev = mtd->priv;
+	void *dest;
+	u32 page_offset, page_size;
+	int ret;
+
+	if (!flash || !dev)
+		return -ENODEV;
+
+	if (flash->bank > dev->num_flashes - 1) {
+		dev_err(&dev->pdev->dev, "Invalid Bank Num");
+		return -EINVAL;
+	}
+
+	/* select address as per bank number */
+	dest = flash->base_addr + to;
+	mutex_lock(&flash->lock);
+
+	page_offset = (u32)to % flash->page_size;
+
+	/* do if all the bytes fit onto one page */
+	if (page_offset + len <= flash->page_size) {
+		ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, len);
+		if (!ret)
+			*retlen += len;
+	} else {
+		u32 i;
+
+		/* the size of data remaining on the first page */
+		page_size = flash->page_size - page_offset;
+
+		ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf,
+				page_size);
+		if (ret)
+			goto err_write;
+		else
+			*retlen += page_size;
+
+		/* write everything in pagesize chunks */
+		for (i = page_size; i < len; i += page_size) {
+			page_size = len - i;
+			if (page_size > flash->page_size)
+				page_size = flash->page_size;
+
+			ret = spear_smi_cpy_toio(dev, flash->bank, dest + i,
+					buf + i, page_size);
+			if (ret)
+				break;
+			else
+				*retlen += page_size;
+		}
+	}
+
+err_write:
+	mutex_unlock(&flash->lock);
+
+	return ret;
+}
+
+/**
+ * spear_smi_probe_flash - Detects the NOR Flash chip.
+ * @dev: structure of SMI information.
+ * @bank: bank on which flash must be probed
+ *
+ * This routine will check whether there exists a flash chip on a given memory
+ * bank ID.
+ * Return index of the probed flash in flash devices structure
+ */
+static int spear_smi_probe_flash(struct spear_smi *dev, u32 bank)
+{
+	int ret;
+	u32 val = 0;
+
+	ret = spear_smi_wait_till_ready(dev, bank, SMI_PROBE_TIMEOUT);
+	if (ret)
+		return ret;
+
+	mutex_lock(&dev->lock);
+
+	dev->status = 0; /* Will be set in interrupt handler */
+	/* put smi in sw mode */
+	val = readl(dev->io_base + SMI_CR1);
+	writel(val | SW_MODE, dev->io_base + SMI_CR1);
+
+	/* send readid command in sw mode */
+	writel(OPCODE_RDID, dev->io_base + SMI_TR);
+
+	val = (bank << BANK_SHIFT) | SEND | (1 << TX_LEN_SHIFT) |
+		(3 << RX_LEN_SHIFT) | TFIE;
+	writel(val, dev->io_base + SMI_CR2);
+
+	/* wait for TFF */
+	ret = wait_event_interruptible_timeout(dev->cmd_complete,
+			dev->status & TFF, SMI_CMD_TIMEOUT);
+	if (ret <= 0) {
+		ret = -ENODEV;
+		goto err_probe;
+	}
+
+	/* get memory chip id */
+	val = readl(dev->io_base + SMI_RR);
+	val &= 0x00ffffff;
+	ret = get_flash_index(val);
+
+err_probe:
+	/* clear sw mode */
+	val = readl(dev->io_base + SMI_CR1);
+	writel(val & ~SW_MODE, dev->io_base + SMI_CR1);
+
+	mutex_unlock(&dev->lock);
+	return ret;
+}
+
+
+#ifdef CONFIG_OF
+static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev,
+					       struct device_node *np)
+{
+	struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct device_node *pp = NULL;
+	const __be32 *addr;
+	u32 val;
+	int len;
+	int i = 0;
+
+	if (!np)
+		return -ENODEV;
+
+	of_property_read_u32(np, "clock-rate", &val);
+	pdata->clk_rate = val;
+
+	pdata->board_flash_info = devm_kzalloc(&pdev->dev,
+					       sizeof(*pdata->board_flash_info),
+					       GFP_KERNEL);
+
+	/* Fill structs for each subnode (flash device) */
+	while ((pp = of_get_next_child(np, pp))) {
+		struct spear_smi_flash_info *flash_info;
+
+		flash_info = &pdata->board_flash_info[i];
+		pdata->np[i] = pp;
+
+		/* Read base-addr and size from DT */
+		addr = of_get_property(pp, "reg", &len);
+		pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]);
+		pdata->board_flash_info->size = be32_to_cpup(&addr[1]);
+
+		if (of_get_property(pp, "st,smi-fast-mode", NULL))
+			pdata->board_flash_info->fast_mode = 1;
+
+		i++;
+	}
+
+	pdata->num_flashes = i;
+
+	return 0;
+}
+#else
+static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev,
+					       struct device_node *np)
+{
+	return -ENOSYS;
+}
+#endif
+
+static int spear_smi_setup_banks(struct platform_device *pdev,
+				 u32 bank, struct device_node *np)
+{
+	struct spear_smi *dev = platform_get_drvdata(pdev);
+	struct mtd_part_parser_data ppdata = {};
+	struct spear_smi_flash_info *flash_info;
+	struct spear_smi_plat_data *pdata;
+	struct spear_snor_flash *flash;
+	struct mtd_partition *parts = NULL;
+	int count = 0;
+	int flash_index;
+	int ret = 0;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (bank > pdata->num_flashes - 1)
+		return -EINVAL;
+
+	flash_info = &pdata->board_flash_info[bank];
+	if (!flash_info)
+		return -ENODEV;
+
+	flash = kzalloc(sizeof(*flash), GFP_ATOMIC);
+	if (!flash)
+		return -ENOMEM;
+	flash->bank = bank;
+	flash->fast_mode = flash_info->fast_mode ? 1 : 0;
+	mutex_init(&flash->lock);
+
+	/* verify whether nor flash is really present on board */
+	flash_index = spear_smi_probe_flash(dev, bank);
+	if (flash_index < 0) {
+		dev_info(&dev->pdev->dev, "smi-nor%d not found\n", bank);
+		ret = flash_index;
+		goto err_probe;
+	}
+	/* map the memory for nor flash chip */
+	flash->base_addr = ioremap(flash_info->mem_base, flash_info->size);
+	if (!flash->base_addr) {
+		ret = -EIO;
+		goto err_probe;
+	}
+
+	dev->flash[bank] = flash;
+	flash->mtd.priv = dev;
+
+	if (flash_info->name)
+		flash->mtd.name = flash_info->name;
+	else
+		flash->mtd.name = flash_devices[flash_index].name;
+
+	flash->mtd.type = MTD_NORFLASH;
+	flash->mtd.writesize = 1;
+	flash->mtd.flags = MTD_CAP_NORFLASH;
+	flash->mtd.size = flash_info->size;
+	flash->mtd.erasesize = flash_devices[flash_index].sectorsize;
+	flash->page_size = flash_devices[flash_index].pagesize;
+	flash->mtd.writebufsize = flash->page_size;
+	flash->erase_cmd = flash_devices[flash_index].erase_cmd;
+	flash->mtd._erase = spear_mtd_erase;
+	flash->mtd._read = spear_mtd_read;
+	flash->mtd._write = spear_mtd_write;
+	flash->dev_id = flash_devices[flash_index].device_id;
+
+	dev_info(&dev->pdev->dev, "mtd .name=%s .size=%llx(%lluM)\n",
+			flash->mtd.name, flash->mtd.size,
+			flash->mtd.size / (1024 * 1024));
+
+	dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n",
+			flash->mtd.erasesize, flash->mtd.erasesize / 1024);
+
+#ifndef CONFIG_OF
+	if (flash_info->partitions) {
+		parts = flash_info->partitions;
+		count = flash_info->nr_partitions;
+	}
+#endif
+	ppdata.of_node = np;
+
+	ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts,
+					count);
+	if (ret) {
+		dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret);
+		goto err_map;
+	}
+
+	return 0;
+
+err_map:
+	iounmap(flash->base_addr);
+
+err_probe:
+	kfree(flash);
+	return ret;
+}
+
+/**
+ * spear_smi_probe - Entry routine
+ * @pdev: platform device structure
+ *
+ * This is the first routine which gets invoked during booting and does all
+ * initialization/allocation work. The routine looks for available memory banks,
+ * and do proper init for any found one.
+ * Returns 0 on success, non zero otherwise
+ */
+static int __devinit spear_smi_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct spear_smi_plat_data *pdata = NULL;
+	struct spear_smi *dev;
+	struct resource *smi_base;
+	int irq, ret = 0;
+	int i;
+
+	if (np) {
+		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata) {
+			pr_err("%s: ERROR: no memory", __func__);
+			ret = -ENOMEM;
+			goto err;
+		}
+		pdev->dev.platform_data = pdata;
+		ret = spear_smi_probe_config_dt(pdev, np);
+		if (ret) {
+			ret = -ENODEV;
+			dev_err(&pdev->dev, "no platform data\n");
+			goto err;
+		}
+	} else {
+		pdata = dev_get_platdata(&pdev->dev);
+		if (pdata < 0) {
+			ret = -ENODEV;
+			dev_err(&pdev->dev, "no platform data\n");
+			goto err;
+		}
+	}
+
+	smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!smi_base) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "invalid smi base address\n");
+		goto err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "invalid smi irq\n");
+		goto err;
+	}
+
+	dev = kzalloc(sizeof(*dev), GFP_ATOMIC);
+	if (!dev) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "mem alloc fail\n");
+		goto err;
+	}
+
+	smi_base = request_mem_region(smi_base->start, resource_size(smi_base),
+			pdev->name);
+	if (!smi_base) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "request mem region fail\n");
+		goto err_mem;
+	}
+
+	dev->io_base = ioremap(smi_base->start, resource_size(smi_base));
+	if (!dev->io_base) {
+		ret = -EIO;
+		dev_err(&pdev->dev, "ioremap fail\n");
+		goto err_ioremap;
+	}
+
+	dev->pdev = pdev;
+	dev->clk_rate = pdata->clk_rate;
+
+	if (dev->clk_rate < 0 || dev->clk_rate > SMI_MAX_CLOCK_FREQ)
+		dev->clk_rate = SMI_MAX_CLOCK_FREQ;
+
+	dev->num_flashes = pdata->num_flashes;
+
+	if (dev->num_flashes > MAX_NUM_FLASH_CHIP) {
+		dev_err(&pdev->dev, "exceeding max number of flashes\n");
+		dev->num_flashes = MAX_NUM_FLASH_CHIP;
+	}
+
+	dev->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		ret = PTR_ERR(dev->clk);
+		goto err_clk;
+	}
+
+	ret = clk_enable(dev->clk);
+	if (ret)
+		goto err_clk_enable;
+
+	ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev);
+	if (ret) {
+		dev_err(&dev->pdev->dev, "SMI IRQ allocation failed\n");
+		goto err_irq;
+	}
+
+	mutex_init(&dev->lock);
+	init_waitqueue_head(&dev->cmd_complete);
+	spear_smi_hw_init(dev);
+	platform_set_drvdata(pdev, dev);
+
+	/* loop for each serial nor-flash which is connected to smi */
+	for (i = 0; i < dev->num_flashes; i++) {
+		ret = spear_smi_setup_banks(pdev, i, pdata->np[i]);
+		if (ret) {
+			dev_err(&dev->pdev->dev, "bank setup failed\n");
+			goto err_bank_setup;
+		}
+	}
+
+	return 0;
+
+err_bank_setup:
+	free_irq(irq, dev);
+	platform_set_drvdata(pdev, NULL);
+err_irq:
+	clk_disable(dev->clk);
+err_clk_enable:
+	clk_put(dev->clk);
+err_clk:
+	iounmap(dev->io_base);
+err_ioremap:
+	release_mem_region(smi_base->start, resource_size(smi_base));
+err_mem:
+	kfree(dev);
+err:
+	return ret;
+}
+
+/**
+ * spear_smi_remove - Exit routine
+ * @pdev: platform device structure
+ *
+ * free all allocations and delete the partitions.
+ */
+static int __devexit spear_smi_remove(struct platform_device *pdev)
+{
+	struct spear_smi *dev;
+	struct spear_smi_plat_data *pdata;
+	struct spear_snor_flash *flash;
+	struct resource *smi_base;
+	int ret;
+	int i, irq;
+
+	dev = platform_get_drvdata(pdev);
+	if (!dev) {
+		dev_err(&pdev->dev, "dev is null\n");
+		return -ENODEV;
+	}
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	/* clean up for all nor flash */
+	for (i = 0; i < dev->num_flashes; i++) {
+		flash = dev->flash[i];
+		if (!flash)
+			continue;
+
+		/* clean up mtd stuff */
+		ret = mtd_device_unregister(&flash->mtd);
+		if (ret)
+			dev_err(&pdev->dev, "error removing mtd\n");
+
+		iounmap(flash->base_addr);
+		kfree(flash);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, dev);
+
+	clk_disable(dev->clk);
+	clk_put(dev->clk);
+	iounmap(dev->io_base);
+	kfree(dev);
+
+	smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(smi_base->start, resource_size(smi_base));
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+int spear_smi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct spear_smi *dev = platform_get_drvdata(pdev);
+
+	if (dev && dev->clk)
+		clk_disable(dev->clk);
+
+	return 0;
+}
+
+int spear_smi_resume(struct platform_device *pdev)
+{
+	struct spear_smi *dev = platform_get_drvdata(pdev);
+	int ret = -EPERM;
+
+	if (dev && dev->clk)
+		ret = clk_enable(dev->clk);
+
+	if (!ret)
+		spear_smi_hw_init(dev);
+	return ret;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id spear_smi_id_table[] = {
+	{ .compatible = "st,spear600-smi" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_smi_id_table);
+#endif
+
+static struct platform_driver spear_smi_driver = {
+	.driver = {
+		.name = "smi",
+		.bus = &platform_bus_type,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(spear_smi_id_table),
+	},
+	.probe = spear_smi_probe,
+	.remove = __devexit_p(spear_smi_remove),
+	.suspend = spear_smi_suspend,
+	.resume = spear_smi_resume,
+};
+
+static int spear_smi_init(void)
+{
+	return platform_driver_register(&spear_smi_driver);
+}
+module_init(spear_smi_init);
+
+static void spear_smi_exit(void)
+{
+	platform_driver_unregister(&spear_smi_driver);
+}
+module_exit(spear_smi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips");

drivers/mtd/devices/sst25l.c

@@ -175,9 +175,6 @@ static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
 	int err;
 
 	/* Sanity checks */
-	if (instr->addr + instr->len > flash->mtd.size)
-		return -EINVAL;
-
 	if ((uint32_t)instr->len % mtd->erasesize)
 		return -EINVAL;
 
@@ -223,16 +220,6 @@ static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
 	unsigned char command[4];
 	int ret;
 
-	/* Sanity checking */
-	if (len == 0)
-		return 0;
-
-	if (from + len > flash->mtd.size)
-		return -EINVAL;
-
-	if (retlen)
-		*retlen = 0;
-
 	spi_message_init(&message);
 	memset(&transfer, 0, sizeof(transfer));
 
@@ -274,13 +261,6 @@ static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
 	int i, j, ret, bytes, copied = 0;
 	unsigned char command[5];
 
-	/* Sanity checks */
-	if (!len)
-		return 0;
-
-	if (to + len > flash->mtd.size)
-		return -EINVAL;
-
 	if ((uint32_t)to % mtd->writesize)
 		return -EINVAL;
 
@@ -402,10 +382,11 @@ static int __devinit sst25l_probe(struct spi_device *spi)
 	flash->mtd.flags	= MTD_CAP_NORFLASH;
 	flash->mtd.erasesize	= flash_info->erase_size;
 	flash->mtd.writesize	= flash_info->page_size;
+	flash->mtd.writebufsize	= flash_info->page_size;
 	flash->mtd.size		= flash_info->page_size * flash_info->nr_pages;
-	flash->mtd.erase	= sst25l_erase;
-	flash->mtd.read		= sst25l_read;
-	flash->mtd.write 	= sst25l_write;
+	flash->mtd._erase	= sst25l_erase;
+	flash->mtd._read		= sst25l_read;
+	flash->mtd._write 	= sst25l_write;
 
 	dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
 		 (long long)flash->mtd.size >> 10);
@@ -418,9 +399,9 @@ static int __devinit sst25l_probe(struct spi_device *spi)
 	      flash->mtd.numeraseregions);
 
 
-	ret = mtd_device_parse_register(&flash->mtd, NULL, 0,
-			data ? data->parts : NULL,
-			data ? data->nr_parts : 0);
+	ret = mtd_device_parse_register(&flash->mtd, NULL, NULL,
+					data ? data->parts : NULL,
+					data ? data->nr_parts : 0);
 	if (ret) {
 		kfree(flash);
 		dev_set_drvdata(&spi->dev, NULL);
@@ -450,18 +431,7 @@ static struct spi_driver sst25l_driver = {
 	.remove		= __devexit_p(sst25l_remove),
 };
 
-static int __init sst25l_init(void)
-{
-	return spi_register_driver(&sst25l_driver);
-}
-
-static void __exit sst25l_exit(void)
-{
-	spi_unregister_driver(&sst25l_driver);
-}
-
-module_init(sst25l_init);
-module_exit(sst25l_exit);
+module_spi_driver(sst25l_driver);
 
 MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
 MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "

drivers/mtd/inftlcore.c

@@ -56,7 +56,7 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	if (memcmp(mtd->name, "DiskOnChip", 10))
 		return;
 
-	if (!mtd->block_isbad) {
+	if (!mtd->_block_isbad) {
 		printk(KERN_ERR
 "INFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n"
 "Please use the new diskonchip driver under the NAND subsystem.\n");

drivers/mtd/lpddr/lpddr_cmds.c

@@ -40,7 +40,7 @@ static int lpddr_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 static int lpddr_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len,
 			size_t *retlen, void **mtdbuf, resource_size_t *phys);
-static void lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len);
+static int lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len);
 static int get_chip(struct map_info *map, struct flchip *chip, int mode);
 static int chip_ready(struct map_info *map, struct flchip *chip, int mode);
 static void put_chip(struct map_info *map, struct flchip *chip);
@@ -63,18 +63,18 @@ struct mtd_info *lpddr_cmdset(struct map_info *map)
 	mtd->type = MTD_NORFLASH;
 
 	/* Fill in the default mtd operations */
-	mtd->read = lpddr_read;
+	mtd->_read = lpddr_read;
 	mtd->type = MTD_NORFLASH;
 	mtd->flags = MTD_CAP_NORFLASH;
 	mtd->flags &= ~MTD_BIT_WRITEABLE;
-	mtd->erase = lpddr_erase;
-	mtd->write = lpddr_write_buffers;
-	mtd->writev = lpddr_writev;
-	mtd->lock = lpddr_lock;
-	mtd->unlock = lpddr_unlock;
+	mtd->_erase = lpddr_erase;
+	mtd->_write = lpddr_write_buffers;
+	mtd->_writev = lpddr_writev;
+	mtd->_lock = lpddr_lock;
+	mtd->_unlock = lpddr_unlock;
 	if (map_is_linear(map)) {
-		mtd->point = lpddr_point;
-		mtd->unpoint = lpddr_unpoint;
+		mtd->_point = lpddr_point;
+		mtd->_unpoint = lpddr_unpoint;
 	}
 	mtd->size = 1 << lpddr->qinfo->DevSizeShift;
 	mtd->erasesize = 1 << lpddr->qinfo->UniformBlockSizeShift;
@@ -530,14 +530,12 @@ static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len,
 	struct flchip *chip = &lpddr->chips[chipnum];
 	int ret = 0;
 
-	if (!map->virt || (adr + len > mtd->size))
+	if (!map->virt)
 		return -EINVAL;
 
 	/* ofs: offset within the first chip that the first read should start */
 	ofs = adr - (chipnum << lpddr->chipshift);
-
 	*mtdbuf = (void *)map->virt + chip->start + ofs;
-	*retlen = 0;
 
 	while (len) {
 		unsigned long thislen;
@@ -575,11 +573,11 @@ static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len,
 	return 0;
 }
 
-static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len)
+static int lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len)
 {
 	struct map_info *map = mtd->priv;
 	struct lpddr_private *lpddr = map->fldrv_priv;
-	int chipnum = adr >> lpddr->chipshift;
+	int chipnum = adr >> lpddr->chipshift, err = 0;
 	unsigned long ofs;
 
 	/* ofs: offset within the first chip that the first read should start */
@@ -603,9 +601,11 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len)
 			chip->ref_point_counter--;
 			if (chip->ref_point_counter == 0)
 				chip->state = FL_READY;
-		} else
+		} else {
 			printk(KERN_WARNING "%s: Warning: unpoint called on non"
 					"pointed region\n", map->name);
+			err = -EINVAL;
+		}
 
 		put_chip(map, chip);
 		mutex_unlock(&chip->mutex);
@@ -614,6 +614,8 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len)
 		ofs = 0;
 		chipnum++;
 	}
+
+	return err;
 }
 
 static int lpddr_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
@@ -637,13 +639,11 @@ static int lpddr_writev(struct mtd_info *mtd, const struct kvec *vecs,
 	int chipnum;
 	unsigned long ofs, vec_seek, i;
 	int wbufsize = 1 << lpddr->qinfo->BufSizeShift;
-
 	size_t len = 0;
 
 	for (i = 0; i < count; i++)
 		len += vecs[i].iov_len;
 
-	*retlen = 0;
 	if (!len)
 		return 0;
 
@@ -688,9 +688,6 @@ static int lpddr_erase(struct mtd_info *mtd, struct erase_info *instr)
 	ofs = instr->addr;
 	len = instr->len;
 
-	if (ofs > mtd->size || (len + ofs) > mtd->size)
-		return -EINVAL;
-
 	while (len > 0) {
 		ret = do_erase_oneblock(mtd, ofs);
 		if (ret)

drivers/mtd/maps/bfin-async-flash.c

@@ -164,8 +164,8 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
-	mtd_device_parse_register(state->mtd, part_probe_types, 0,
-			pdata->parts, pdata->nr_parts);
+	mtd_device_parse_register(state->mtd, part_probe_types, NULL,
+				  pdata->parts, pdata->nr_parts);
 
 	platform_set_drvdata(pdev, state);
 

drivers/mtd/maps/dc21285.c

@@ -196,7 +196,7 @@ static int __init init_dc21285(void)
 
 	dc21285_mtd->owner = THIS_MODULE;
 
-	mtd_device_parse_register(dc21285_mtd, probes, 0, NULL, 0);
+	mtd_device_parse_register(dc21285_mtd, probes, NULL, NULL, 0);
 
 	if(machine_is_ebsa285()) {
 		/*

drivers/mtd/maps/gpio-addr-flash.c

@@ -252,8 +252,8 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev)
 	}
 
 
-	mtd_device_parse_register(state->mtd, part_probe_types, 0,
-			pdata->parts, pdata->nr_parts);
+	mtd_device_parse_register(state->mtd, part_probe_types, NULL,
+				  pdata->parts, pdata->nr_parts);
 
 	return 0;
 }

drivers/mtd/maps/h720x-flash.c

@@ -85,8 +85,8 @@ static int __init h720x_mtd_init(void)
 	if (mymtd) {
 		mymtd->owner = THIS_MODULE;
 
-		mtd_device_parse_register(mymtd, NULL, 0,
-				h720x_partitions, NUM_PARTITIONS);
+		mtd_device_parse_register(mymtd, NULL, NULL,
+					  h720x_partitions, NUM_PARTITIONS);
 		return 0;
 	}
 

drivers/mtd/maps/impa7.c

@@ -91,7 +91,7 @@ static int __init init_impa7(void)
 		if (impa7_mtd[i]) {
 			impa7_mtd[i]->owner = THIS_MODULE;
 			devicesfound++;
-			mtd_device_parse_register(impa7_mtd[i], NULL, 0,
+			mtd_device_parse_register(impa7_mtd[i], NULL, NULL,
 						  partitions,
 						  ARRAY_SIZE(partitions));
 		}

drivers/mtd/maps/intel_vr_nor.c

@@ -72,7 +72,7 @@ static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p)
 {
 	/* register the flash bank */
 	/* partition the flash bank */
-	return mtd_device_parse_register(p->info, NULL, 0, NULL, 0);
+	return mtd_device_parse_register(p->info, NULL, NULL, NULL, 0);
 }
 
 static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p)

drivers/mtd/maps/ixp2000.c

@@ -226,7 +226,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
 	}
 	info->mtd->owner = THIS_MODULE;
 
-	err = mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
+	err = mtd_device_parse_register(info->mtd, probes, NULL, NULL, 0);
 	if (err)
 		goto Error;
 

drivers/mtd/maps/ixp4xx.c

@@ -182,6 +182,9 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 {
 	struct flash_platform_data *plat = dev->dev.platform_data;
 	struct ixp4xx_flash_info *info;
+	struct mtd_part_parser_data ppdata = {
+		.origin = dev->resource->start,
+	};
 	int err = -1;
 
 	if (!plat)
@@ -247,7 +250,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	/* Use the fast version */
 	info->map.write = ixp4xx_write16;
 
-	err = mtd_device_parse_register(info->mtd, probes, dev->resource->start,
+	err = mtd_device_parse_register(info->mtd, probes, &ppdata,
 			plat->parts, plat->nr_parts);
 	if (err) {
 		printk(KERN_ERR "Could not parse partitions\n");

drivers/mtd/maps/l440gx.c

@@ -27,17 +27,21 @@ static struct mtd_info *mymtd;
 
 
 /* Is this really the vpp port? */
+static DEFINE_SPINLOCK(l440gx_vpp_lock);
+static int l440gx_vpp_refcnt;
 static void l440gx_set_vpp(struct map_info *map, int vpp)
 {
-	unsigned long l;
+	unsigned long flags;
 
-	l = inl(VPP_PORT);
+	spin_lock_irqsave(&l440gx_vpp_lock, flags);
 	if (vpp) {
-		l |= 1;
+		if (++l440gx_vpp_refcnt == 1)   /* first nested 'on' */
+			outl(inl(VPP_PORT) | 1, VPP_PORT);
 	} else {
-		l &= ~1;
+		if (--l440gx_vpp_refcnt == 0)   /* last nested 'off' */
+			outl(inl(VPP_PORT) & ~1, VPP_PORT);
 	}
-	outl(l, VPP_PORT);
+	spin_unlock_irqrestore(&l440gx_vpp_lock, flags);
 }
 
 static struct map_info l440gx_map = {

drivers/mtd/maps/lantiq-flash.c

@@ -45,6 +45,7 @@ struct ltq_mtd {
 };
 
 static char ltq_map_name[] = "ltq_nor";
+static const char *ltq_probe_types[] __devinitconst = { "cmdlinepart", NULL };
 
 static map_word
 ltq_read16(struct map_info *map, unsigned long adr)
@@ -168,8 +169,9 @@ ltq_mtd_probe(struct platform_device *pdev)
 	cfi->addr_unlock1 ^= 1;
 	cfi->addr_unlock2 ^= 1;
 
-	err = mtd_device_parse_register(ltq_mtd->mtd, NULL, 0,
-			ltq_mtd_data->parts, ltq_mtd_data->nr_parts);
+	err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types, NULL,
+					ltq_mtd_data->parts,
+					ltq_mtd_data->nr_parts);
 	if (err) {
 		dev_err(&pdev->dev, "failed to add partitions\n");
 		goto err_destroy;

drivers/mtd/maps/latch-addr-flash.c

@@ -199,8 +199,9 @@ static int __devinit latch_addr_flash_probe(struct platform_device *dev)
 	}
 	info->mtd->owner = THIS_MODULE;
 
-	mtd_device_parse_register(info->mtd, NULL, 0,
-			latch_addr_data->parts, latch_addr_data->nr_parts);
+	mtd_device_parse_register(info->mtd, NULL, NULL,
+				  latch_addr_data->parts,
+				  latch_addr_data->nr_parts);
 	return 0;
 
 iounmap:

drivers/mtd/maps/pcmciamtd.c

@@ -294,13 +294,24 @@ static void pcmcia_copy_to(struct map_info *map, unsigned long to, const void *f
 }
 
 
+static DEFINE_SPINLOCK(pcmcia_vpp_lock);
+static int pcmcia_vpp_refcnt;
 static void pcmciamtd_set_vpp(struct map_info *map, int on)
 {
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
 	struct pcmcia_device *link = dev->p_dev;
+	unsigned long flags;
 
 	pr_debug("dev = %p on = %d vpp = %d\n\n", dev, on, dev->vpp);
-	pcmcia_fixup_vpp(link, on ? dev->vpp : 0);
+	spin_lock_irqsave(&pcmcia_vpp_lock, flags);
+	if (on) {
+		if (++pcmcia_vpp_refcnt == 1)   /* first nested 'on' */
+			pcmcia_fixup_vpp(link, dev->vpp);
+	} else {
+		if (--pcmcia_vpp_refcnt == 0)   /* last nested 'off' */
+			pcmcia_fixup_vpp(link, 0);
+	}
+	spin_unlock_irqrestore(&pcmcia_vpp_lock, flags);
 }
 
 

drivers/mtd/maps/physmap.c

@@ -27,6 +27,8 @@ struct physmap_flash_info {
 	struct mtd_info		*mtd[MAX_RESOURCES];
 	struct mtd_info		*cmtd;
 	struct map_info		map[MAX_RESOURCES];
+	spinlock_t		vpp_lock;
+	int			vpp_refcnt;
 };
 
 static int physmap_flash_remove(struct platform_device *dev)
@@ -63,12 +65,26 @@ static void physmap_set_vpp(struct map_info *map, int state)
 {
 	struct platform_device *pdev;
 	struct physmap_flash_data *physmap_data;
+	struct physmap_flash_info *info;
+	unsigned long flags;
 
 	pdev = (struct platform_device *)map->map_priv_1;
 	physmap_data = pdev->dev.platform_data;
 
-	if (physmap_data->set_vpp)
-		physmap_data->set_vpp(pdev, state);
+	if (!physmap_data->set_vpp)
+		return;
+
+	info = platform_get_drvdata(pdev);
+
+	spin_lock_irqsave(&info->vpp_lock, flags);
+	if (state) {
+		if (++info->vpp_refcnt == 1)    /* first nested 'on' */
+			physmap_data->set_vpp(pdev, 1);
+	} else {
+		if (--info->vpp_refcnt == 0)    /* last nested 'off' */
+			physmap_data->set_vpp(pdev, 0);
+	}
+	spin_unlock_irqrestore(&info->vpp_lock, flags);
 }
 
 static const char *rom_probe_types[] = {
@@ -172,9 +188,11 @@ static int physmap_flash_probe(struct platform_device *dev)
 	if (err)
 		goto err_out;
 
+	spin_lock_init(&info->vpp_lock);
+
 	part_types = physmap_data->part_probe_types ? : part_probe_types;
 
-	mtd_device_parse_register(info->cmtd, part_types, 0,
+	mtd_device_parse_register(info->cmtd, part_types, NULL,
 				  physmap_data->parts, physmap_data->nr_parts);
 	return 0;
 

drivers/mtd/maps/plat-ram.c

@@ -222,8 +222,9 @@ static int platram_probe(struct platform_device *pdev)
 	/* check to see if there are any available partitions, or wether
 	 * to add this device whole */
 
-	err = mtd_device_parse_register(info->mtd, pdata->probes, 0,
-			pdata->partitions, pdata->nr_partitions);
+	err = mtd_device_parse_register(info->mtd, pdata->probes, NULL,
+					pdata->partitions,
+					pdata->nr_partitions);
 	if (!err)
 		dev_info(&pdev->dev, "registered mtd device\n");
 

drivers/mtd/maps/pxa2xx-flash.c

@@ -98,7 +98,8 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
 	}
 	info->mtd->owner = THIS_MODULE;
 
-	mtd_device_parse_register(info->mtd, probes, 0, flash->parts, flash->nr_parts);
+	mtd_device_parse_register(info->mtd, probes, NULL, flash->parts,
+				  flash->nr_parts);
 
 	platform_set_drvdata(pdev, info);
 	return 0;

drivers/mtd/maps/rbtx4939-flash.c

@@ -102,8 +102,8 @@ static int rbtx4939_flash_probe(struct platform_device *dev)
 	info->mtd->owner = THIS_MODULE;
 	if (err)
 		goto err_out;
-	err = mtd_device_parse_register(info->mtd, NULL, 0,
-			pdata->parts, pdata->nr_parts);
+	err = mtd_device_parse_register(info->mtd, NULL, NULL, pdata->parts,
+					pdata->nr_parts);
 
 	if (err)
 		goto err_out;

drivers/mtd/maps/sa1100-flash.c

@@ -36,10 +36,22 @@ struct sa_info {
 	struct sa_subdev_info	subdev[0];
 };
 
+static DEFINE_SPINLOCK(sa1100_vpp_lock);
+static int sa1100_vpp_refcnt;
 static void sa1100_set_vpp(struct map_info *map, int on)
 {
 	struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map);
-	subdev->plat->set_vpp(on);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sa1100_vpp_lock, flags);
+	if (on) {
+		if (++sa1100_vpp_refcnt == 1)   /* first nested 'on' */
+			subdev->plat->set_vpp(1);
+	} else {
+		if (--sa1100_vpp_refcnt == 0)   /* last nested 'off' */
+			subdev->plat->set_vpp(0);
+	}
+	spin_unlock_irqrestore(&sa1100_vpp_lock, flags);
 }
 
 static void sa1100_destroy_subdev(struct sa_subdev_info *subdev)
@@ -252,8 +264,8 @@ static int __devinit sa1100_mtd_probe(struct platform_device *pdev)
 	/*
 	 * Partition selection stuff.
 	 */
-	mtd_device_parse_register(info->mtd, part_probes, 0,
-			plat->parts, plat->nr_parts);
+	mtd_device_parse_register(info->mtd, part_probes, NULL, plat->parts,
+				  plat->nr_parts);
 
 	platform_set_drvdata(pdev, info);
 	err = 0;

drivers/mtd/maps/solutionengine.c

@@ -92,8 +92,8 @@ static int __init init_soleng_maps(void)
 		mtd_device_register(eprom_mtd, NULL, 0);
 	}
 
-	mtd_device_parse_register(flash_mtd, probes, 0,
-			superh_se_partitions, NUM_PARTITIONS);
+	mtd_device_parse_register(flash_mtd, probes, NULL,
+				  superh_se_partitions, NUM_PARTITIONS);
 
 	return 0;
 }

drivers/mtd/maps/uclinux.c

@@ -85,7 +85,7 @@ static int __init uclinux_mtd_init(void)
 	}
 
 	mtd->owner = THIS_MODULE;
-	mtd->point = uclinux_point;
+	mtd->_point = uclinux_point;
 	mtd->priv = mapp;
 
 	uclinux_ram_mtdinfo = mtd;

drivers/mtd/maps/vmu-flash.c

@@ -360,9 +360,6 @@ static int vmu_flash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int index = 0, retval, partition, leftover, numblocks;
 	unsigned char cx;
 
-	if (len < 1)
-		return -EIO;
-
 	mpart = mtd->priv;
 	mdev = mpart->mdev;
 	partition = mpart->partition;
@@ -434,11 +431,6 @@ static int vmu_flash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	partition = mpart->partition;
 	card = maple_get_drvdata(mdev);
 
-	/* simple sanity checks */
-	if (len < 1) {
-		error = -EIO;
-		goto failed;
-	}
 	numblocks = card->parts[partition].numblocks;
 	if (to + len > numblocks * card->blocklen)
 		len = numblocks * card->blocklen - to;
@@ -544,9 +536,9 @@ static void vmu_queryblocks(struct mapleq *mq)
 	mtd_cur->flags = MTD_WRITEABLE|MTD_NO_ERASE;
 	mtd_cur->size = part_cur->numblocks * card->blocklen;
 	mtd_cur->erasesize = card->blocklen;
-	mtd_cur->write = vmu_flash_write;
-	mtd_cur->read = vmu_flash_read;
-	mtd_cur->sync = vmu_flash_sync;
+	mtd_cur->_write = vmu_flash_write;
+	mtd_cur->_read = vmu_flash_read;
+	mtd_cur->_sync = vmu_flash_sync;
 	mtd_cur->writesize = card->blocklen;
 
 	mpart = kmalloc(sizeof(struct mdev_part), GFP_KERNEL);

drivers/mtd/maps/wr_sbc82xx_flash.c

@@ -142,7 +142,7 @@ static int __init init_sbc82xx_flash(void)
 			nr_parts = ARRAY_SIZE(smallflash_parts);
 		}
 
-		mtd_device_parse_register(sbcmtd[i], part_probes, 0,
+		mtd_device_parse_register(sbcmtd[i], part_probes, NULL,
 					  defparts, nr_parts);
 	}
 	return 0;

drivers/mtd/mtd_blkdevs.c

@@ -233,6 +233,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 	ret = __get_mtd_device(dev->mtd);
 	if (ret)
 		goto error_release;
+	dev->file_mode = mode;
 
 unlock:
 	dev->open++;

drivers/mtd/mtdblock.c

@@ -321,8 +321,12 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd)
 	mutex_unlock(&mtdblk->cache_mutex);
 
 	if (!--mtdblk->count) {
-		/* It was the last usage. Free the cache */
-		mtd_sync(mbd->mtd);
+		/*
+		 * It was the last usage. Free the cache, but only sync if
+		 * opened for writing.
+		 */
+		if (mbd->file_mode & FMODE_WRITE)
+			mtd_sync(mbd->mtd);
 		vfree(mtdblk->cache_data);
 	}
 

drivers/mtd/mtdchar.c

@@ -405,7 +405,7 @@ static int mtdchar_writeoob(struct file *file, struct mtd_info *mtd,
 	if (length > 4096)
 		return -EINVAL;
 
-	if (!mtd->write_oob)
+	if (!mtd->_write_oob)
 		ret = -EOPNOTSUPP;
 	else
 		ret = access_ok(VERIFY_READ, ptr, length) ? 0 : -EFAULT;
@@ -576,7 +576,7 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd,
 			!access_ok(VERIFY_READ, req.usr_data, req.len) ||
 			!access_ok(VERIFY_READ, req.usr_oob, req.ooblen))
 		return -EFAULT;
-	if (!mtd->write_oob)
+	if (!mtd->_write_oob)
 		return -EOPNOTSUPP;
 
 	ops.mode = req.mode;

drivers/mtd/mtdconcat.c

@@ -72,8 +72,6 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int ret = 0, err;
 	int i;
 
-	*retlen = 0;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 		size_t size, retsize;
@@ -126,11 +124,6 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len,
 	int err = -EINVAL;
 	int i;
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
-	*retlen = 0;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 		size_t size, retsize;
@@ -145,11 +138,7 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len,
 		else
 			size = len;
 
-		if (!(subdev->flags & MTD_WRITEABLE))
-			err = -EROFS;
-		else
-			err = mtd_write(subdev, to, size, &retsize, buf);
-
+		err = mtd_write(subdev, to, size, &retsize, buf);
 		if (err)
 			break;
 
@@ -176,19 +165,10 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs,
 	int i;
 	int err = -EINVAL;
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
-	*retlen = 0;
-
 	/* Calculate total length of data */
 	for (i = 0; i < count; i++)
 		total_len += vecs[i].iov_len;
 
-	/* Do not allow write past end of device */
-	if ((to + total_len) > mtd->size)
-		return -EINVAL;
-
 	/* Check alignment */
 	if (mtd->writesize > 1) {
 		uint64_t __to = to;
@@ -224,12 +204,8 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs,
 		old_iov_len = vecs_copy[entry_high].iov_len;
 		vecs_copy[entry_high].iov_len = size;
 
-		if (!(subdev->flags & MTD_WRITEABLE))
-			err = -EROFS;
-		else
-			err = mtd_writev(subdev, &vecs_copy[entry_low],
-					 entry_high - entry_low + 1, to,
-					 &retsize);
+		err = mtd_writev(subdev, &vecs_copy[entry_low],
+				 entry_high - entry_low + 1, to, &retsize);
 
 		vecs_copy[entry_high].iov_len = old_iov_len - size;
 		vecs_copy[entry_high].iov_base += size;
@@ -403,15 +379,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 	uint64_t length, offset = 0;
 	struct erase_info *erase;
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
-	if (instr->addr > concat->mtd.size)
-		return -EINVAL;
-
-	if (instr->len + instr->addr > concat->mtd.size)
-		return -EINVAL;
-
 	/*
 	 * Check for proper erase block alignment of the to-be-erased area.
 	 * It is easier to do this based on the super device's erase
@@ -459,8 +426,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 			return -EINVAL;
 	}
 
-	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
-
 	/* make a local copy of instr to avoid modifying the caller's struct */
 	erase = kmalloc(sizeof (struct erase_info), GFP_KERNEL);
 
@@ -499,10 +464,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 		else
 			erase->len = length;
 
-		if (!(subdev->flags & MTD_WRITEABLE)) {
-			err = -EROFS;
-			break;
-		}
 		length -= erase->len;
 		if ((err = concat_dev_erase(subdev, erase))) {
 			/* sanity check: should never happen since
@@ -538,9 +499,6 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	struct mtd_concat *concat = CONCAT(mtd);
 	int i, err = -EINVAL;
 
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 		uint64_t size;
@@ -575,9 +533,6 @@ static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	struct mtd_concat *concat = CONCAT(mtd);
 	int i, err = 0;
 
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 		uint64_t size;
@@ -650,9 +605,6 @@ static int concat_block_isbad(struct mtd_info *mtd, loff_t ofs)
 	if (!mtd_can_have_bb(concat->subdev[0]))
 		return res;
 
-	if (ofs > mtd->size)
-		return -EINVAL;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 
@@ -673,12 +625,6 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	struct mtd_concat *concat = CONCAT(mtd);
 	int i, err = -EINVAL;
 
-	if (!mtd_can_have_bb(concat->subdev[0]))
-		return 0;
-
-	if (ofs > mtd->size)
-		return -EINVAL;
-
 	for (i = 0; i < concat->num_subdev; i++) {
 		struct mtd_info *subdev = concat->subdev[i];
 
@@ -716,10 +662,6 @@ static unsigned long concat_get_unmapped_area(struct mtd_info *mtd,
 			continue;
 		}
 
-		/* we've found the subdev over which the mapping will reside */
-		if (offset + len > subdev->size)
-			return (unsigned long) -EINVAL;
-
 		return mtd_get_unmapped_area(subdev, len, offset, flags);
 	}
 
@@ -777,16 +719,16 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	concat->mtd.subpage_sft = subdev[0]->subpage_sft;
 	concat->mtd.oobsize = subdev[0]->oobsize;
 	concat->mtd.oobavail = subdev[0]->oobavail;
-	if (subdev[0]->writev)
-		concat->mtd.writev = concat_writev;
-	if (subdev[0]->read_oob)
-		concat->mtd.read_oob = concat_read_oob;
-	if (subdev[0]->write_oob)
-		concat->mtd.write_oob = concat_write_oob;
-	if (subdev[0]->block_isbad)
-		concat->mtd.block_isbad = concat_block_isbad;
-	if (subdev[0]->block_markbad)
-		concat->mtd.block_markbad = concat_block_markbad;
+	if (subdev[0]->_writev)
+		concat->mtd._writev = concat_writev;
+	if (subdev[0]->_read_oob)
+		concat->mtd._read_oob = concat_read_oob;
+	if (subdev[0]->_write_oob)
+		concat->mtd._write_oob = concat_write_oob;
+	if (subdev[0]->_block_isbad)
+		concat->mtd._block_isbad = concat_block_isbad;
+	if (subdev[0]->_block_markbad)
+		concat->mtd._block_markbad = concat_block_markbad;
 
 	concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks;
 
@@ -833,8 +775,8 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 		if (concat->mtd.writesize   !=  subdev[i]->writesize ||
 		    concat->mtd.subpage_sft != subdev[i]->subpage_sft ||
 		    concat->mtd.oobsize    !=  subdev[i]->oobsize ||
-		    !concat->mtd.read_oob  != !subdev[i]->read_oob ||
-		    !concat->mtd.write_oob != !subdev[i]->write_oob) {
+		    !concat->mtd._read_oob  != !subdev[i]->_read_oob ||
+		    !concat->mtd._write_oob != !subdev[i]->_write_oob) {
 			kfree(concat);
 			printk("Incompatible OOB or ECC data on \"%s\"\n",
 			       subdev[i]->name);
@@ -849,15 +791,15 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	concat->num_subdev = num_devs;
 	concat->mtd.name = name;
 
-	concat->mtd.erase = concat_erase;
-	concat->mtd.read = concat_read;
-	concat->mtd.write = concat_write;
-	concat->mtd.sync = concat_sync;
-	concat->mtd.lock = concat_lock;
-	concat->mtd.unlock = concat_unlock;
-	concat->mtd.suspend = concat_suspend;
-	concat->mtd.resume = concat_resume;
-	concat->mtd.get_unmapped_area = concat_get_unmapped_area;
+	concat->mtd._erase = concat_erase;
+	concat->mtd._read = concat_read;
+	concat->mtd._write = concat_write;
+	concat->mtd._sync = concat_sync;
+	concat->mtd._lock = concat_lock;
+	concat->mtd._unlock = concat_unlock;
+	concat->mtd._suspend = concat_suspend;
+	concat->mtd._resume = concat_resume;
+	concat->mtd._get_unmapped_area = concat_get_unmapped_area;
 
 	/*
 	 * Combine the erase block size info of the subdevices:

drivers/mtd/mtdcore.c

@@ -107,7 +107,7 @@ static LIST_HEAD(mtd_notifiers);
  */
 static void mtd_release(struct device *dev)
 {
-	struct mtd_info *mtd = dev_get_drvdata(dev);
+	struct mtd_info __maybe_unused *mtd = dev_get_drvdata(dev);
 	dev_t index = MTD_DEVT(mtd->index);
 
 	/* remove /dev/mtdXro node if needed */
@@ -126,7 +126,7 @@ static int mtd_cls_resume(struct device *dev)
 {
 	struct mtd_info *mtd = dev_get_drvdata(dev);
 
-	if (mtd && mtd->resume)
+	if (mtd)
 		mtd_resume(mtd);
 	return 0;
 }
@@ -610,8 +610,8 @@ int __get_mtd_device(struct mtd_info *mtd)
 	if (!try_module_get(mtd->owner))
 		return -ENODEV;
 
-	if (mtd->get_device) {
-		err = mtd->get_device(mtd);
+	if (mtd->_get_device) {
+		err = mtd->_get_device(mtd);
 
 		if (err) {
 			module_put(mtd->owner);
@@ -675,13 +675,266 @@ void __put_mtd_device(struct mtd_info *mtd)
 	--mtd->usecount;
 	BUG_ON(mtd->usecount < 0);
 
-	if (mtd->put_device)
-		mtd->put_device(mtd);
+	if (mtd->_put_device)
+		mtd->_put_device(mtd);
 
 	module_put(mtd->owner);
 }
 EXPORT_SYMBOL_GPL(__put_mtd_device);
 
+/*
+ * Erase is an asynchronous operation.  Device drivers are supposed
+ * to call instr->callback() whenever the operation completes, even
+ * if it completes with a failure.
+ * Callers are supposed to pass a callback function and wait for it
+ * to be called before writing to the block.
+ */
+int mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	if (instr->addr > mtd->size || instr->len > mtd->size - instr->addr)
+		return -EINVAL;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
+	if (!instr->len) {
+		instr->state = MTD_ERASE_DONE;
+		mtd_erase_callback(instr);
+		return 0;
+	}
+	return mtd->_erase(mtd, instr);
+}
+EXPORT_SYMBOL_GPL(mtd_erase);
+
+/*
+ * This stuff for eXecute-In-Place. phys is optional and may be set to NULL.
+ */
+int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+	      void **virt, resource_size_t *phys)
+{
+	*retlen = 0;
+	*virt = NULL;
+	if (phys)
+		*phys = 0;
+	if (!mtd->_point)
+		return -EOPNOTSUPP;
+	if (from < 0 || from > mtd->size || len > mtd->size - from)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_point(mtd, from, len, retlen, virt, phys);
+}
+EXPORT_SYMBOL_GPL(mtd_point);
+
+/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
+int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	if (!mtd->_point)
+		return -EOPNOTSUPP;
+	if (from < 0 || from > mtd->size || len > mtd->size - from)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_unpoint(mtd, from, len);
+}
+EXPORT_SYMBOL_GPL(mtd_unpoint);
+
+/*
+ * Allow NOMMU mmap() to directly map the device (if not NULL)
+ * - return the address to which the offset maps
+ * - return -ENOSYS to indicate refusal to do the mapping
+ */
+unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
+				    unsigned long offset, unsigned long flags)
+{
+	if (!mtd->_get_unmapped_area)
+		return -EOPNOTSUPP;
+	if (offset > mtd->size || len > mtd->size - offset)
+		return -EINVAL;
+	return mtd->_get_unmapped_area(mtd, len, offset, flags);
+}
+EXPORT_SYMBOL_GPL(mtd_get_unmapped_area);
+
+int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+	     u_char *buf)
+{
+	*retlen = 0;
+	if (from < 0 || from > mtd->size || len > mtd->size - from)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_read(mtd, from, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_read);
+
+int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+	      const u_char *buf)
+{
+	*retlen = 0;
+	if (to < 0 || to > mtd->size || len > mtd->size - to)
+		return -EINVAL;
+	if (!mtd->_write || !(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (!len)
+		return 0;
+	return mtd->_write(mtd, to, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_write);
+
+/*
+ * In blackbox flight recorder like scenarios we want to make successful writes
+ * in interrupt context. panic_write() is only intended to be called when its
+ * known the kernel is about to panic and we need the write to succeed. Since
+ * the kernel is not going to be running for much longer, this function can
+ * break locks and delay to ensure the write succeeds (but not sleep).
+ */
+int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+		    const u_char *buf)
+{
+	*retlen = 0;
+	if (!mtd->_panic_write)
+		return -EOPNOTSUPP;
+	if (to < 0 || to > mtd->size || len > mtd->size - to)
+		return -EINVAL;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (!len)
+		return 0;
+	return mtd->_panic_write(mtd, to, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_panic_write);
+
+/*
+ * Method to access the protection register area, present in some flash
+ * devices. The user data is one time programmable but the factory data is read
+ * only.
+ */
+int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+			   size_t len)
+{
+	if (!mtd->_get_fact_prot_info)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_get_fact_prot_info(mtd, buf, len);
+}
+EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info);
+
+int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+			   size_t *retlen, u_char *buf)
+{
+	*retlen = 0;
+	if (!mtd->_read_fact_prot_reg)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg);
+
+int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+			   size_t len)
+{
+	if (!mtd->_get_user_prot_info)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_get_user_prot_info(mtd, buf, len);
+}
+EXPORT_SYMBOL_GPL(mtd_get_user_prot_info);
+
+int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+			   size_t *retlen, u_char *buf)
+{
+	*retlen = 0;
+	if (!mtd->_read_user_prot_reg)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg);
+
+int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
+			    size_t *retlen, u_char *buf)
+{
+	*retlen = 0;
+	if (!mtd->_write_user_prot_reg)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+}
+EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg);
+
+int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	if (!mtd->_lock_user_prot_reg)
+		return -EOPNOTSUPP;
+	if (!len)
+		return 0;
+	return mtd->_lock_user_prot_reg(mtd, from, len);
+}
+EXPORT_SYMBOL_GPL(mtd_lock_user_prot_reg);
+
+/* Chip-supported device locking */
+int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	if (!mtd->_lock)
+		return -EOPNOTSUPP;
+	if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_lock(mtd, ofs, len);
+}
+EXPORT_SYMBOL_GPL(mtd_lock);
+
+int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	if (!mtd->_unlock)
+		return -EOPNOTSUPP;
+	if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_unlock(mtd, ofs, len);
+}
+EXPORT_SYMBOL_GPL(mtd_unlock);
+
+int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	if (!mtd->_is_locked)
+		return -EOPNOTSUPP;
+	if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs)
+		return -EINVAL;
+	if (!len)
+		return 0;
+	return mtd->_is_locked(mtd, ofs, len);
+}
+EXPORT_SYMBOL_GPL(mtd_is_locked);
+
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
+{
+	if (!mtd->_block_isbad)
+		return 0;
+	if (ofs < 0 || ofs > mtd->size)
+		return -EINVAL;
+	return mtd->_block_isbad(mtd, ofs);
+}
+EXPORT_SYMBOL_GPL(mtd_block_isbad);
+
+int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	if (!mtd->_block_markbad)
+		return -EOPNOTSUPP;
+	if (ofs < 0 || ofs > mtd->size)
+		return -EINVAL;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	return mtd->_block_markbad(mtd, ofs);
+}
+EXPORT_SYMBOL_GPL(mtd_block_markbad);
+
 /*
  * default_mtd_writev - the default writev method
  * @mtd: mtd device description object pointer
@@ -729,9 +982,11 @@ int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
 	       unsigned long count, loff_t to, size_t *retlen)
 {
 	*retlen = 0;
-	if (!mtd->writev)
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (!mtd->_writev)
 		return default_mtd_writev(mtd, vecs, count, to, retlen);
-	return mtd->writev(mtd, vecs, count, to, retlen);
+	return mtd->_writev(mtd, vecs, count, to, retlen);
 }
 EXPORT_SYMBOL_GPL(mtd_writev);
 

drivers/mtd/mtdoops.c

@@ -169,7 +169,7 @@ static void mtdoops_workfunc_erase(struct work_struct *work)
 			cxt->nextpage = 0;
 	}
 
-	while (mtd_can_have_bb(mtd)) {
+	while (1) {
 		ret = mtd_block_isbad(mtd, cxt->nextpage * record_size);
 		if (!ret)
 			break;
@@ -199,9 +199,9 @@ badblock:
 		return;
 	}
 
-	if (mtd_can_have_bb(mtd) && ret == -EIO) {
+	if (ret == -EIO) {
 		ret = mtd_block_markbad(mtd, cxt->nextpage * record_size);
-		if (ret < 0) {
+		if (ret < 0 && ret != -EOPNOTSUPP) {
 			printk(KERN_ERR "mtdoops: block_markbad failed, aborting\n");
 			return;
 		}
@@ -257,8 +257,7 @@ static void find_next_position(struct mtdoops_context *cxt)
 	size_t retlen;
 
 	for (page = 0; page < cxt->oops_pages; page++) {
-		if (mtd_can_have_bb(mtd) &&
-		    mtd_block_isbad(mtd, page * record_size))
+		if (mtd_block_isbad(mtd, page * record_size))
 			continue;
 		/* Assume the page is used */
 		mark_page_used(cxt, page);

drivers/mtd/mtdpart.c

@@ -65,12 +65,8 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
 	int res;
 
 	stats = part->master->ecc_stats;
-
-	if (from >= mtd->size)
-		len = 0;
-	else if (from + len > mtd->size)
-		len = mtd->size - from;
-	res = mtd_read(part->master, from + part->offset, len, retlen, buf);
+	res = part->master->_read(part->master, from + part->offset, len,
+				  retlen, buf);
 	if (unlikely(res)) {
 		if (mtd_is_bitflip(res))
 			mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected;
@@ -84,19 +80,16 @@ static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, void **virt, resource_size_t *phys)
 {
 	struct mtd_part *part = PART(mtd);
-	if (from >= mtd->size)
-		len = 0;
-	else if (from + len > mtd->size)
-		len = mtd->size - from;
-	return mtd_point(part->master, from + part->offset, len, retlen,
-			 virt, phys);
+
+	return part->master->_point(part->master, from + part->offset, len,
+				    retlen, virt, phys);
 }
 
-static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
 
-	mtd_unpoint(part->master, from + part->offset, len);
+	return part->master->_unpoint(part->master, from + part->offset, len);
 }
 
 static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
@@ -107,7 +100,8 @@ static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
 	struct mtd_part *part = PART(mtd);
 
 	offset += part->offset;
-	return mtd_get_unmapped_area(part->master, len, offset, flags);
+	return part->master->_get_unmapped_area(part->master, len, offset,
+						flags);
 }
 
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
@@ -138,7 +132,7 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
 			return -EINVAL;
 	}
 
-	res = mtd_read_oob(part->master, from + part->offset, ops);
+	res = part->master->_read_oob(part->master, from + part->offset, ops);
 	if (unlikely(res)) {
 		if (mtd_is_bitflip(res))
 			mtd->ecc_stats.corrected++;
@@ -152,55 +146,46 @@ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_read_user_prot_reg(part->master, from, len, retlen, buf);
+	return part->master->_read_user_prot_reg(part->master, from, len,
+						 retlen, buf);
 }
 
 static int part_get_user_prot_info(struct mtd_info *mtd,
 		struct otp_info *buf, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_get_user_prot_info(part->master, buf, len);
+	return part->master->_get_user_prot_info(part->master, buf, len);
 }
 
 static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_read_fact_prot_reg(part->master, from, len, retlen, buf);
+	return part->master->_read_fact_prot_reg(part->master, from, len,
+						 retlen, buf);
 }
 
 static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
 		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_get_fact_prot_info(part->master, buf, len);
+	return part->master->_get_fact_prot_info(part->master, buf, len);
 }
 
 static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
 		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	if (to >= mtd->size)
-		len = 0;
-	else if (to + len > mtd->size)
-		len = mtd->size - to;
-	return mtd_write(part->master, to + part->offset, len, retlen, buf);
+	return part->master->_write(part->master, to + part->offset, len,
+				    retlen, buf);
 }
 
 static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
 		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	if (to >= mtd->size)
-		len = 0;
-	else if (to + len > mtd->size)
-		len = mtd->size - to;
-	return mtd_panic_write(part->master, to + part->offset, len, retlen,
-			       buf);
+	return part->master->_panic_write(part->master, to + part->offset, len,
+					  retlen, buf);
 }
 
 static int part_write_oob(struct mtd_info *mtd, loff_t to,
@@ -208,50 +193,43 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to,
 {
 	struct mtd_part *part = PART(mtd);
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-
 	if (to >= mtd->size)
 		return -EINVAL;
 	if (ops->datbuf && to + ops->len > mtd->size)
 		return -EINVAL;
-	return mtd_write_oob(part->master, to + part->offset, ops);
+	return part->master->_write_oob(part->master, to + part->offset, ops);
 }
 
 static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_write_user_prot_reg(part->master, from, len, retlen, buf);
+	return part->master->_write_user_prot_reg(part->master, from, len,
+						  retlen, buf);
 }
 
 static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_lock_user_prot_reg(part->master, from, len);
+	return part->master->_lock_user_prot_reg(part->master, from, len);
 }
 
 static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
 		unsigned long count, loff_t to, size_t *retlen)
 {
 	struct mtd_part *part = PART(mtd);
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	return mtd_writev(part->master, vecs, count, to + part->offset,
-			  retlen);
+	return part->master->_writev(part->master, vecs, count,
+				     to + part->offset, retlen);
 }
 
 static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct mtd_part *part = PART(mtd);
 	int ret;
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	if (instr->addr >= mtd->size)
-		return -EINVAL;
+
 	instr->addr += part->offset;
-	ret = mtd_erase(part->master, instr);
+	ret = part->master->_erase(part->master, instr);
 	if (ret) {
 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
 			instr->fail_addr -= part->offset;
@@ -262,7 +240,7 @@ static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 void mtd_erase_callback(struct erase_info *instr)
 {
-	if (instr->mtd->erase == part_erase) {
+	if (instr->mtd->_erase == part_erase) {
 		struct mtd_part *part = PART(instr->mtd);
 
 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
@@ -277,52 +255,44 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback);
 static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-	return mtd_lock(part->master, ofs + part->offset, len);
+	return part->master->_lock(part->master, ofs + part->offset, len);
 }
 
 static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-	return mtd_unlock(part->master, ofs + part->offset, len);
+	return part->master->_unlock(part->master, ofs + part->offset, len);
 }
 
 static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	if ((len + ofs) > mtd->size)
-		return -EINVAL;
-	return mtd_is_locked(part->master, ofs + part->offset, len);
+	return part->master->_is_locked(part->master, ofs + part->offset, len);
 }
 
 static void part_sync(struct mtd_info *mtd)
 {
 	struct mtd_part *part = PART(mtd);
-	mtd_sync(part->master);
+	part->master->_sync(part->master);
 }
 
 static int part_suspend(struct mtd_info *mtd)
 {
 	struct mtd_part *part = PART(mtd);
-	return mtd_suspend(part->master);
+	return part->master->_suspend(part->master);
 }
 
 static void part_resume(struct mtd_info *mtd)
 {
 	struct mtd_part *part = PART(mtd);
-	mtd_resume(part->master);
+	part->master->_resume(part->master);
 }
 
 static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
-	if (ofs >= mtd->size)
-		return -EINVAL;
 	ofs += part->offset;
-	return mtd_block_isbad(part->master, ofs);
+	return part->master->_block_isbad(part->master, ofs);
 }
 
 static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
@@ -330,12 +300,8 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	struct mtd_part *part = PART(mtd);
 	int res;
 
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	if (ofs >= mtd->size)
-		return -EINVAL;
 	ofs += part->offset;
-	res = mtd_block_markbad(part->master, ofs);
+	res = part->master->_block_markbad(part->master, ofs);
 	if (!res)
 		mtd->ecc_stats.badblocks++;
 	return res;
@@ -410,54 +376,55 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 	 */
 	slave->mtd.dev.parent = master->dev.parent;
 
-	slave->mtd.read = part_read;
-	slave->mtd.write = part_write;
+	slave->mtd._read = part_read;
+	slave->mtd._write = part_write;
 
-	if (master->panic_write)
-		slave->mtd.panic_write = part_panic_write;
+	if (master->_panic_write)
+		slave->mtd._panic_write = part_panic_write;
 
-	if (master->point && master->unpoint) {
-		slave->mtd.point = part_point;
-		slave->mtd.unpoint = part_unpoint;
+	if (master->_point && master->_unpoint) {
+		slave->mtd._point = part_point;
+		slave->mtd._unpoint = part_unpoint;
 	}
 
-	if (master->get_unmapped_area)
-		slave->mtd.get_unmapped_area = part_get_unmapped_area;
-	if (master->read_oob)
-		slave->mtd.read_oob = part_read_oob;
-	if (master->write_oob)
-		slave->mtd.write_oob = part_write_oob;
-	if (master->read_user_prot_reg)
-		slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
-	if (master->read_fact_prot_reg)
-		slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
-	if (master->write_user_prot_reg)
-		slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
-	if (master->lock_user_prot_reg)
-		slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
-	if (master->get_user_prot_info)
-		slave->mtd.get_user_prot_info = part_get_user_prot_info;
-	if (master->get_fact_prot_info)
-		slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
-	if (master->sync)
-		slave->mtd.sync = part_sync;
-	if (!partno && !master->dev.class && master->suspend && master->resume) {
-			slave->mtd.suspend = part_suspend;
-			slave->mtd.resume = part_resume;
+	if (master->_get_unmapped_area)
+		slave->mtd._get_unmapped_area = part_get_unmapped_area;
+	if (master->_read_oob)
+		slave->mtd._read_oob = part_read_oob;
+	if (master->_write_oob)
+		slave->mtd._write_oob = part_write_oob;
+	if (master->_read_user_prot_reg)
+		slave->mtd._read_user_prot_reg = part_read_user_prot_reg;
+	if (master->_read_fact_prot_reg)
+		slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg;
+	if (master->_write_user_prot_reg)
+		slave->mtd._write_user_prot_reg = part_write_user_prot_reg;
+	if (master->_lock_user_prot_reg)
+		slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg;
+	if (master->_get_user_prot_info)
+		slave->mtd._get_user_prot_info = part_get_user_prot_info;
+	if (master->_get_fact_prot_info)
+		slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
+	if (master->_sync)
+		slave->mtd._sync = part_sync;
+	if (!partno && !master->dev.class && master->_suspend &&
+	    master->_resume) {
+			slave->mtd._suspend = part_suspend;
+			slave->mtd._resume = part_resume;
 	}
-	if (master->writev)
-		slave->mtd.writev = part_writev;
-	if (master->lock)
-		slave->mtd.lock = part_lock;
-	if (master->unlock)
-		slave->mtd.unlock = part_unlock;
-	if (master->is_locked)
-		slave->mtd.is_locked = part_is_locked;
-	if (master->block_isbad)
-		slave->mtd.block_isbad = part_block_isbad;
-	if (master->block_markbad)
-		slave->mtd.block_markbad = part_block_markbad;
-	slave->mtd.erase = part_erase;
+	if (master->_writev)
+		slave->mtd._writev = part_writev;
+	if (master->_lock)
+		slave->mtd._lock = part_lock;
+	if (master->_unlock)
+		slave->mtd._unlock = part_unlock;
+	if (master->_is_locked)
+		slave->mtd._is_locked = part_is_locked;
+	if (master->_block_isbad)
+		slave->mtd._block_isbad = part_block_isbad;
+	if (master->_block_markbad)
+		slave->mtd._block_markbad = part_block_markbad;
+	slave->mtd._erase = part_erase;
 	slave->master = master;
 	slave->offset = part->offset;
 
@@ -549,7 +516,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 	}
 
 	slave->mtd.ecclayout = master->ecclayout;
-	if (master->block_isbad) {
+	slave->mtd.ecc_strength = master->ecc_strength;
+	if (master->_block_isbad) {
 		uint64_t offs = 0;
 
 		while (offs < slave->mtd.size) {
@@ -761,7 +729,7 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types,
 	for ( ; ret <= 0 && *types; types++) {
 		parser = get_partition_parser(*types);
 		if (!parser && !request_module("%s", *types))
-				parser = get_partition_parser(*types);
+			parser = get_partition_parser(*types);
 		if (!parser)
 			continue;
 		ret = (*parser->parse_fn)(master, pparts, data);

drivers/mtd/nand/Kconfig

@@ -314,6 +314,26 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
 	  load time (assuming you build diskonchip as a module) with the module
 	  parameter "inftl_bbt_write=1".
 
+config MTD_NAND_DOCG4
+	tristate "Support for DiskOnChip G4 (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select BCH
+	select BITREVERSE
+	help
+	  Support for diskonchip G4 nand flash, found in various smartphones and
+	  PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba
+	  Portege G900, Asus P526, and O2 XDA Zinc.
+
+	  With this driver you will be able to use UBI and create a ubifs on the
+	  device, so you may wish to consider enabling UBI and UBIFS as well.
+
+	  These devices ship with the Mys/Sandisk SAFTL formatting, for which
+	  there is currently no mtd parser, so you may want to use command line
+	  partitioning to segregate write-protected blocks. On the Treo680, the
+	  first five erase blocks (256KiB each) are write-protected, followed
+	  by the block containing the saftl partition table.  This is probably
+	  typical.
+
 config MTD_NAND_SHARPSL
 	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
 	depends on ARCH_PXA
@@ -421,7 +441,6 @@ config MTD_NAND_NANDSIM
 config MTD_NAND_GPMI_NAND
         bool "GPMI NAND Flash Controller driver"
         depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
-	select MTD_CMDLINE_PARTS
         help
 	 Enables NAND Flash support for IMX23 or IMX28.
 	 The GPMI controller is very powerful, with the help of BCH

drivers/mtd/nand/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB)	+= ppchameleonevb.o
 obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
 obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o
 obj-$(CONFIG_MTD_NAND_DISKONCHIP)	+= diskonchip.o
+obj-$(CONFIG_MTD_NAND_DOCG4)		+= docg4.o
 obj-$(CONFIG_MTD_NAND_FSMC)		+= fsmc_nand.o
 obj-$(CONFIG_MTD_NAND_H1900)		+= h1910.o
 obj-$(CONFIG_MTD_NAND_RTC_FROM4)	+= rtc_from4.o

drivers/mtd/nand/alauda.c

@@ -585,12 +585,13 @@ static int alauda_init_media(struct alauda *al)
 	mtd->writesize = 1<<card->pageshift;
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->read = alauda_read;
-	mtd->write = alauda_write;
-	mtd->erase = alauda_erase;
-	mtd->block_isbad = alauda_isbad;
+	mtd->_read = alauda_read;
+	mtd->_write = alauda_write;
+	mtd->_erase = alauda_erase;
+	mtd->_block_isbad = alauda_isbad;
 	mtd->priv = al;
 	mtd->owner = THIS_MODULE;
+	mtd->ecc_strength = 1;
 
 	err = mtd_device_register(mtd, NULL, 0);
 	if (err) {

drivers/mtd/nand/atmel_nand.c

@@ -603,6 +603,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.hwctl = atmel_nand_hwctl;
 		nand_chip->ecc.read_page = atmel_nand_read_page;
 		nand_chip->ecc.bytes = 4;
+		nand_chip->ecc.strength = 1;
 	}
 
 	nand_chip->chip_delay = 20;		/* 20us command delay time */

drivers/mtd/nand/bcm_umi_nand.c

@@ -475,6 +475,14 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
 			largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
 		this->badblock_pattern = &largepage_bbt;
 	}
+
+	/*
+	 * FIXME: ecc strength value of 6 bits per 512 bytes of data is a
+	 * conservative guess, given 13 ecc bytes and using bch alg.
+	 * (Assume Galois field order m=15 to allow a margin of error.)
+	 */
+	this->ecc.strength = 6;
+
 #endif
 
 	/* Now finish off the scan, now that ecc.layout has been initialized. */
@@ -487,7 +495,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
 
 	/* Register the partitions */
 	board_mtd->name = "bcm_umi-nand";
-	mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0);
+	mtd_device_parse_register(board_mtd, NULL, NULL, NULL, 0);
 
 	/* Return happy */
 	return 0;

drivers/mtd/nand/bf5xx_nand.c

@@ -702,9 +702,11 @@ static int bf5xx_nand_scan(struct mtd_info *mtd)
 		if (likely(mtd->writesize >= 512)) {
 			chip->ecc.size = 512;
 			chip->ecc.bytes = 6;
+			chip->ecc.strength = 2;
 		} else {
 			chip->ecc.size = 256;
 			chip->ecc.bytes = 3;
+			chip->ecc.strength = 1;
 			bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET));
 			SSYNC();
 		}

drivers/mtd/nand/cafe_nand.c

@@ -783,6 +783,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
 	cafe->nand.ecc.size = mtd->writesize;
 	cafe->nand.ecc.bytes = 14;
+	cafe->nand.ecc.strength = 4;
 	cafe->nand.ecc.hwctl  = (void *)cafe_nand_bug;
 	cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
 	cafe->nand.ecc.correct  = (void *)cafe_nand_bug;
@@ -799,7 +800,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	pci_set_drvdata(pdev, mtd);
 
 	mtd->name = "cafe_nand";
-	mtd_device_parse_register(mtd, part_probes, 0, NULL, 0);
+	mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
 
 	goto out;
 

drivers/mtd/nand/cmx270_nand.c

@@ -219,7 +219,7 @@ static int __init cmx270_init(void)
 	}
 
 	/* Register the partitions */
-	ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, 0,
+	ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, NULL,
 					partition_info, NUM_PARTITIONS);
 	if (ret)
 		goto err_scan;

drivers/mtd/nand/cs553x_nand.c

@@ -248,6 +248,8 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 		goto out_ior;
 	}
 
+	this->ecc.strength = 1;
+
 	new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs);
 
 	cs553x_mtd[cs] = new_mtd;
@@ -313,7 +315,7 @@ static int __init cs553x_init(void)
 	for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
 		if (cs553x_mtd[i]) {
 			/* If any devices registered, return success. Else the last error. */
-			mtd_device_parse_register(cs553x_mtd[i], NULL, 0,
+			mtd_device_parse_register(cs553x_mtd[i], NULL, NULL,
 						  NULL, 0);
 			err = 0;
 		}

drivers/mtd/nand/davinci_nand.c

@@ -641,6 +641,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 			info->chip.ecc.bytes = 3;
 		}
 		info->chip.ecc.size = 512;
+		info->chip.ecc.strength = pdata->ecc_bits;
 		break;
 	default:
 		ret = -EINVAL;
@@ -752,8 +753,8 @@ syndrome_done:
 	if (ret < 0)
 		goto err_scan;
 
-	ret = mtd_device_parse_register(&info->mtd, NULL, 0,
-			pdata->parts, pdata->nr_parts);
+	ret = mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts,
+					pdata->nr_parts);
 
 	if (ret < 0)
 		goto err_scan;

drivers/mtd/nand/denali.c

@@ -1590,6 +1590,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			ECC_15BITS * (denali->mtd.writesize /
 			ECC_SECTOR_SIZE)))) {
 		/* if MLC OOB size is large enough, use 15bit ECC*/
+		denali->nand.ecc.strength = 15;
 		denali->nand.ecc.layout = &nand_15bit_oob;
 		denali->nand.ecc.bytes = ECC_15BITS;
 		iowrite32(15, denali->flash_reg + ECC_CORRECTION);
@@ -1600,12 +1601,14 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 				" contain 8bit ECC correction codes");
 		goto failed_req_irq;
 	} else {
+		denali->nand.ecc.strength = 8;
 		denali->nand.ecc.layout = &nand_8bit_oob;
 		denali->nand.ecc.bytes = ECC_8BITS;
 		iowrite32(8, denali->flash_reg + ECC_CORRECTION);
 	}
 
 	denali->nand.ecc.bytes *= denali->devnum;
+	denali->nand.ecc.strength *= denali->devnum;
 	denali->nand.ecc.layout->eccbytes *=
 		denali->mtd.writesize / ECC_SECTOR_SIZE;
 	denali->nand.ecc.layout->oobfree[0].offset =

drivers/mtd/nand/diskonchip.c

@@ -1653,6 +1653,7 @@ static int __init doc_probe(unsigned long physadr)
 	nand->ecc.mode		= NAND_ECC_HW_SYNDROME;
 	nand->ecc.size		= 512;
 	nand->ecc.bytes		= 6;
+	nand->ecc.strength	= 2;
 	nand->bbt_options	= NAND_BBT_USE_FLASH;
 
 	doc->physadr		= physadr;

drivers/mtd/nand/docg4.c

@@ -0,0 +1,1377 @@
+/*
+ *  Copyright © 2012 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * mtd nand driver for M-Systems DiskOnChip G4
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Tested on the Palm Treo 680.  The G4 is also present on Toshiba Portege, Asus
+ * P526, some HTC smartphones (Wizard, Prophet, ...), O2 XDA Zinc, maybe others.
+ * Should work on these as well.  Let me know!
+ *
+ * TODO:
+ *
+ *  Mechanism for management of password-protected areas
+ *
+ *  Hamming ecc when reading oob only
+ *
+ *  According to the M-Sys documentation, this device is also available in a
+ *  "dual-die" configuration having a 256MB capacity, but no mechanism for
+ *  detecting this variant is documented.  Currently this driver assumes 128MB
+ *  capacity.
+ *
+ *  Support for multiple cascaded devices ("floors").  Not sure which gadgets
+ *  contain multiple G4s in a cascaded configuration, if any.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/bch.h>
+#include <linux/bitrev.h>
+
+/*
+ * You'll want to ignore badblocks if you're reading a partition that contains
+ * data written by the TrueFFS library (i.e., by PalmOS, Windows, etc), since
+ * it does not use mtd nand's method for marking bad blocks (using oob area).
+ * This will also skip the check of the "page written" flag.
+ */
+static bool ignore_badblocks;
+module_param(ignore_badblocks, bool, 0);
+MODULE_PARM_DESC(ignore_badblocks, "no badblock checking performed");
+
+struct docg4_priv {
+	struct mtd_info	*mtd;
+	struct device *dev;
+	void __iomem *virtadr;
+	int status;
+	struct {
+		unsigned int command;
+		int column;
+		int page;
+	} last_command;
+	uint8_t oob_buf[16];
+	uint8_t ecc_buf[7];
+	int oob_page;
+	struct bch_control *bch;
+};
+
+/*
+ * Defines prefixed with DOCG4 are unique to the diskonchip G4.  All others are
+ * shared with other diskonchip devices (P3, G3 at least).
+ *
+ * Functions with names prefixed with docg4_ are mtd / nand interface functions
+ * (though they may also be called internally).  All others are internal.
+ */
+
+#define DOC_IOSPACE_DATA		0x0800
+
+/* register offsets */
+#define DOC_CHIPID			0x1000
+#define DOC_DEVICESELECT		0x100a
+#define DOC_ASICMODE			0x100c
+#define DOC_DATAEND			0x101e
+#define DOC_NOP				0x103e
+
+#define DOC_FLASHSEQUENCE		0x1032
+#define DOC_FLASHCOMMAND		0x1034
+#define DOC_FLASHADDRESS		0x1036
+#define DOC_FLASHCONTROL		0x1038
+#define DOC_ECCCONF0			0x1040
+#define DOC_ECCCONF1			0x1042
+#define DOC_HAMMINGPARITY		0x1046
+#define DOC_BCH_SYNDROM(idx)		(0x1048 + idx)
+
+#define DOC_ASICMODECONFIRM		0x1072
+#define DOC_CHIPID_INV			0x1074
+#define DOC_POWERMODE			0x107c
+
+#define DOCG4_MYSTERY_REG		0x1050
+
+/* apparently used only to write oob bytes 6 and 7 */
+#define DOCG4_OOB_6_7			0x1052
+
+/* DOC_FLASHSEQUENCE register commands */
+#define DOC_SEQ_RESET			0x00
+#define DOCG4_SEQ_PAGE_READ		0x03
+#define DOCG4_SEQ_FLUSH			0x29
+#define DOCG4_SEQ_PAGEWRITE		0x16
+#define DOCG4_SEQ_PAGEPROG		0x1e
+#define DOCG4_SEQ_BLOCKERASE		0x24
+
+/* DOC_FLASHCOMMAND register commands */
+#define DOCG4_CMD_PAGE_READ             0x00
+#define DOC_CMD_ERASECYCLE2		0xd0
+#define DOCG4_CMD_FLUSH                 0x70
+#define DOCG4_CMD_READ2                 0x30
+#define DOC_CMD_PROG_BLOCK_ADDR		0x60
+#define DOCG4_CMD_PAGEWRITE		0x80
+#define DOC_CMD_PROG_CYCLE2		0x10
+#define DOC_CMD_RESET			0xff
+
+/* DOC_POWERMODE register bits */
+#define DOC_POWERDOWN_READY		0x80
+
+/* DOC_FLASHCONTROL register bits */
+#define DOC_CTRL_CE			0x10
+#define DOC_CTRL_UNKNOWN		0x40
+#define DOC_CTRL_FLASHREADY		0x01
+
+/* DOC_ECCCONF0 register bits */
+#define DOC_ECCCONF0_READ_MODE		0x8000
+#define DOC_ECCCONF0_UNKNOWN		0x2000
+#define DOC_ECCCONF0_ECC_ENABLE	        0x1000
+#define DOC_ECCCONF0_DATA_BYTES_MASK	0x07ff
+
+/* DOC_ECCCONF1 register bits */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR	0x80
+#define DOC_ECCCONF1_ECC_ENABLE         0x07
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN	0x20
+
+/* DOC_ASICMODE register bits */
+#define DOC_ASICMODE_RESET		0x00
+#define DOC_ASICMODE_NORMAL		0x01
+#define DOC_ASICMODE_POWERDOWN		0x02
+#define DOC_ASICMODE_MDWREN		0x04
+#define DOC_ASICMODE_BDETCT_RESET	0x08
+#define DOC_ASICMODE_RSTIN_RESET	0x10
+#define DOC_ASICMODE_RAM_WE		0x20
+
+/* good status values read after read/write/erase operations */
+#define DOCG4_PROGSTATUS_GOOD          0x51
+#define DOCG4_PROGSTATUS_GOOD_2        0xe0
+
+/*
+ * On read operations (page and oob-only), the first byte read from I/O reg is a
+ * status.  On error, it reads 0x73; otherwise, it reads either 0x71 (first read
+ * after reset only) or 0x51, so bit 1 is presumed to be an error indicator.
+ */
+#define DOCG4_READ_ERROR           0x02 /* bit 1 indicates read error */
+
+/* anatomy of the device */
+#define DOCG4_CHIP_SIZE        0x8000000
+#define DOCG4_PAGE_SIZE        0x200
+#define DOCG4_PAGES_PER_BLOCK  0x200
+#define DOCG4_BLOCK_SIZE       (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE)
+#define DOCG4_NUMBLOCKS        (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE)
+#define DOCG4_OOB_SIZE         0x10
+#define DOCG4_CHIP_SHIFT       27    /* log_2(DOCG4_CHIP_SIZE) */
+#define DOCG4_PAGE_SHIFT       9     /* log_2(DOCG4_PAGE_SIZE) */
+#define DOCG4_ERASE_SHIFT      18    /* log_2(DOCG4_BLOCK_SIZE) */
+
+/* all but the last byte is included in ecc calculation */
+#define DOCG4_BCH_SIZE         (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1)
+
+#define DOCG4_USERDATA_LEN     520 /* 512 byte page plus 8 oob avail to user */
+
+/* expected values from the ID registers */
+#define DOCG4_IDREG1_VALUE     0x0400
+#define DOCG4_IDREG2_VALUE     0xfbff
+
+/* primitive polynomial used to build the Galois field used by hw ecc gen */
+#define DOCG4_PRIMITIVE_POLY   0x4443
+
+#define DOCG4_M                14  /* Galois field is of order 2^14 */
+#define DOCG4_T                4   /* BCH alg corrects up to 4 bit errors */
+
+#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
+
+/*
+ * Oob bytes 0 - 6 are available to the user.
+ * Byte 7 is hamming ecc for first 7 bytes.  Bytes 8 - 14 are hw-generated ecc.
+ * Byte 15 (the last) is used by the driver as a "page written" flag.
+ */
+static struct nand_ecclayout docg4_oobinfo = {
+	.eccbytes = 9,
+	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
+	.oobavail = 7,
+	.oobfree = { {0, 7} }
+};
+
+/*
+ * The device has a nop register which M-Sys claims is for the purpose of
+ * inserting precise delays.  But beware; at least some operations fail if the
+ * nop writes are replaced with a generic delay!
+ */
+static inline void write_nop(void __iomem *docptr)
+{
+	writew(0, docptr + DOC_NOP);
+}
+
+static void docg4_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *nand = mtd->priv;
+	uint16_t *p = (uint16_t *) buf;
+	len >>= 1;
+
+	for (i = 0; i < len; i++)
+		p[i] = readw(nand->IO_ADDR_R);
+}
+
+static void docg4_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *nand = mtd->priv;
+	uint16_t *p = (uint16_t *) buf;
+	len >>= 1;
+
+	for (i = 0; i < len; i++)
+		writew(p[i], nand->IO_ADDR_W);
+}
+
+static int poll_status(struct docg4_priv *doc)
+{
+	/*
+	 * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL
+	 * register.  Operations known to take a long time (e.g., block erase)
+	 * should sleep for a while before calling this.
+	 */
+
+	uint16_t flash_status;
+	unsigned int timeo;
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	/* hardware quirk requires reading twice initially */
+	flash_status = readw(docptr + DOC_FLASHCONTROL);
+
+	timeo = 1000;
+	do {
+		cpu_relax();
+		flash_status = readb(docptr + DOC_FLASHCONTROL);
+	} while (!(flash_status & DOC_CTRL_FLASHREADY) && --timeo);
+
+
+	if (!timeo) {
+		dev_err(doc->dev, "%s: timed out!\n", __func__);
+		return NAND_STATUS_FAIL;
+	}
+
+	if (unlikely(timeo < 50))
+		dev_warn(doc->dev, "%s: nearly timed out; %d remaining\n",
+			 __func__, timeo);
+
+	return 0;
+}
+
+
+static int docg4_wait(struct mtd_info *mtd, struct nand_chip *nand)
+{
+
+	struct docg4_priv *doc = nand->priv;
+	int status = NAND_STATUS_WP;       /* inverse logic?? */
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	/* report any previously unreported error */
+	if (doc->status) {
+		status |= doc->status;
+		doc->status = 0;
+		return status;
+	}
+
+	status |= poll_status(doc);
+	return status;
+}
+
+static void docg4_select_chip(struct mtd_info *mtd, int chip)
+{
+	/*
+	 * Select among multiple cascaded chips ("floors").  Multiple floors are
+	 * not yet supported, so the only valid non-negative value is 0.
+	 */
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev, "%s: chip %d\n", __func__, chip);
+
+	if (chip < 0)
+		return;		/* deselected */
+
+	if (chip > 0)
+		dev_warn(doc->dev, "multiple floors currently unsupported\n");
+
+	writew(0, docptr + DOC_DEVICESELECT);
+}
+
+static void reset(struct mtd_info *mtd)
+{
+	/* full device reset */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	writew(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN,
+	       docptr + DOC_ASICMODE);
+	writew(~(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN),
+	       docptr + DOC_ASICMODECONFIRM);
+	write_nop(docptr);
+
+	writew(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN,
+	       docptr + DOC_ASICMODE);
+	writew(~(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN),
+	       docptr + DOC_ASICMODECONFIRM);
+
+	writew(DOC_ECCCONF1_ECC_ENABLE, docptr + DOC_ECCCONF1);
+
+	poll_status(doc);
+}
+
+static void read_hw_ecc(void __iomem *docptr, uint8_t *ecc_buf)
+{
+	/* read the 7 hw-generated ecc bytes */
+
+	int i;
+	for (i = 0; i < 7; i++) { /* hw quirk; read twice */
+		ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+		ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+	}
+}
+
+static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page)
+{
+	/*
+	 * Called after a page read when hardware reports bitflips.
+	 * Up to four bitflips can be corrected.
+	 */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	int i, numerrs, errpos[4];
+	const uint8_t blank_read_hwecc[8] = {
+		0xcf, 0x72, 0xfc, 0x1b, 0xa9, 0xc7, 0xb9, 0 };
+
+	read_hw_ecc(docptr, doc->ecc_buf); /* read 7 hw-generated ecc bytes */
+
+	/* check if read error is due to a blank page */
+	if (!memcmp(doc->ecc_buf, blank_read_hwecc, 7))
+		return 0;	/* yes */
+
+	/* skip additional check of "written flag" if ignore_badblocks */
+	if (ignore_badblocks == false) {
+
+		/*
+		 * If the hw ecc bytes are not those of a blank page, there's
+		 * still a chance that the page is blank, but was read with
+		 * errors.  Check the "written flag" in last oob byte, which
+		 * is set to zero when a page is written.  If more than half
+		 * the bits are set, assume a blank page.  Unfortunately, the
+		 * bit flips(s) are not reported in stats.
+		 */
+
+		if (doc->oob_buf[15]) {
+			int bit, numsetbits = 0;
+			unsigned long written_flag = doc->oob_buf[15];
+			for_each_set_bit(bit, &written_flag, 8)
+				numsetbits++;
+			if (numsetbits > 4) { /* assume blank */
+				dev_warn(doc->dev,
+					 "error(s) in blank page "
+					 "at offset %08x\n",
+					 page * DOCG4_PAGE_SIZE);
+				return 0;
+			}
+		}
+	}
+
+	/*
+	 * The hardware ecc unit produces oob_ecc ^ calc_ecc.  The kernel's bch
+	 * algorithm is used to decode this.  However the hw operates on page
+	 * data in a bit order that is the reverse of that of the bch alg,
+	 * requiring that the bits be reversed on the result.  Thanks to Ivan
+	 * Djelic for his analysis!
+	 */
+	for (i = 0; i < 7; i++)
+		doc->ecc_buf[i] = bitrev8(doc->ecc_buf[i]);
+
+	numerrs = decode_bch(doc->bch, NULL, DOCG4_USERDATA_LEN, NULL,
+			     doc->ecc_buf, NULL, errpos);
+
+	if (numerrs == -EBADMSG) {
+		dev_warn(doc->dev, "uncorrectable errors at offset %08x\n",
+			 page * DOCG4_PAGE_SIZE);
+		return -EBADMSG;
+	}
+
+	BUG_ON(numerrs < 0);	/* -EINVAL, or anything other than -EBADMSG */
+
+	/* undo last step in BCH alg (modulo mirroring not needed) */
+	for (i = 0; i < numerrs; i++)
+		errpos[i] = (errpos[i] & ~7)|(7-(errpos[i] & 7));
+
+	/* fix the errors */
+	for (i = 0; i < numerrs; i++) {
+
+		/* ignore if error within oob ecc bytes */
+		if (errpos[i] > DOCG4_USERDATA_LEN * 8)
+			continue;
+
+		/* if error within oob area preceeding ecc bytes... */
+		if (errpos[i] > DOCG4_PAGE_SIZE * 8)
+			change_bit(errpos[i] - DOCG4_PAGE_SIZE * 8,
+				   (unsigned long *)doc->oob_buf);
+
+		else    /* error in page data */
+			change_bit(errpos[i], (unsigned long *)buf);
+	}
+
+	dev_notice(doc->dev, "%d error(s) corrected at offset %08x\n",
+		   numerrs, page * DOCG4_PAGE_SIZE);
+
+	return numerrs;
+}
+
+static uint8_t docg4_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+
+	dev_dbg(doc->dev, "%s\n", __func__);
+
+	if (doc->last_command.command == NAND_CMD_STATUS) {
+		int status;
+
+		/*
+		 * Previous nand command was status request, so nand
+		 * infrastructure code expects to read the status here.  If an
+		 * error occurred in a previous operation, report it.
+		 */
+		doc->last_command.command = 0;
+
+		if (doc->status) {
+			status = doc->status;
+			doc->status = 0;
+		}
+
+		/* why is NAND_STATUS_WP inverse logic?? */
+		else
+			status = NAND_STATUS_WP | NAND_STATUS_READY;
+
+		return status;
+	}
+
+	dev_warn(doc->dev, "unexpectd call to read_byte()\n");
+
+	return 0;
+}
+
+static void write_addr(struct docg4_priv *doc, uint32_t docg4_addr)
+{
+	/* write the four address bytes packed in docg4_addr to the device */
+
+	void __iomem *docptr = doc->virtadr;
+	writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+	docg4_addr >>= 8;
+	writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+	docg4_addr >>= 8;
+	writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+	docg4_addr >>= 8;
+	writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+}
+
+static int read_progstatus(struct docg4_priv *doc)
+{
+	/*
+	 * This apparently checks the status of programming.  Done after an
+	 * erasure, and after page data is written.  On error, the status is
+	 * saved, to be later retrieved by the nand infrastructure code.
+	 */
+	void __iomem *docptr = doc->virtadr;
+
+	/* status is read from the I/O reg */
+	uint16_t status1 = readw(docptr + DOC_IOSPACE_DATA);
+	uint16_t status2 = readw(docptr + DOC_IOSPACE_DATA);
+	uint16_t status3 = readw(docptr + DOCG4_MYSTERY_REG);
+
+	dev_dbg(doc->dev, "docg4: %s: %02x %02x %02x\n",
+	      __func__, status1, status2, status3);
+
+	if (status1 != DOCG4_PROGSTATUS_GOOD
+	    || status2 != DOCG4_PROGSTATUS_GOOD_2
+	    || status3 != DOCG4_PROGSTATUS_GOOD_2) {
+		doc->status = NAND_STATUS_FAIL;
+		dev_warn(doc->dev, "read_progstatus failed: "
+			 "%02x, %02x, %02x\n", status1, status2, status3);
+		return -EIO;
+	}
+	return 0;
+}
+
+static int pageprog(struct mtd_info *mtd)
+{
+	/*
+	 * Final step in writing a page.  Writes the contents of its
+	 * internal buffer out to the flash array, or some such.
+	 */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	int retval = 0;
+
+	dev_dbg(doc->dev, "docg4: %s\n", __func__);
+
+	writew(DOCG4_SEQ_PAGEPROG, docptr + DOC_FLASHSEQUENCE);
+	writew(DOC_CMD_PROG_CYCLE2, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	/* Just busy-wait; usleep_range() slows things down noticeably. */
+	poll_status(doc);
+
+	writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+	writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+	writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	retval = read_progstatus(doc);
+	writew(0, docptr + DOC_DATAEND);
+	write_nop(docptr);
+	poll_status(doc);
+	write_nop(docptr);
+
+	return retval;
+}
+
+static void sequence_reset(struct mtd_info *mtd)
+{
+	/* common starting sequence for all operations */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	writew(DOC_CTRL_UNKNOWN | DOC_CTRL_CE, docptr + DOC_FLASHCONTROL);
+	writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE);
+	writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_nop(docptr);
+	poll_status(doc);
+	write_nop(docptr);
+}
+
+static void read_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr)
+{
+	/* first step in reading a page */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev,
+	      "docg4: %s: g4 page %08x\n", __func__, docg4_addr);
+
+	sequence_reset(mtd);
+
+	writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE);
+	writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+
+	write_addr(doc, docg4_addr);
+
+	write_nop(docptr);
+	writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	poll_status(doc);
+}
+
+static void write_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr)
+{
+	/* first step in writing a page */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev,
+	      "docg4: %s: g4 addr: %x\n", __func__, docg4_addr);
+	sequence_reset(mtd);
+	writew(DOCG4_SEQ_PAGEWRITE, docptr + DOC_FLASHSEQUENCE);
+	writew(DOCG4_CMD_PAGEWRITE, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_addr(doc, docg4_addr);
+	write_nop(docptr);
+	write_nop(docptr);
+	poll_status(doc);
+}
+
+static uint32_t mtd_to_docg4_address(int page, int column)
+{
+	/*
+	 * Convert mtd address to format used by the device, 32 bit packed.
+	 *
+	 * Some notes on G4 addressing... The M-Sys documentation on this device
+	 * claims that pages are 2K in length, and indeed, the format of the
+	 * address used by the device reflects that.  But within each page are
+	 * four 512 byte "sub-pages", each with its own oob data that is
+	 * read/written immediately after the 512 bytes of page data.  This oob
+	 * data contains the ecc bytes for the preceeding 512 bytes.
+	 *
+	 * Rather than tell the mtd nand infrastructure that page size is 2k,
+	 * with four sub-pages each, we engage in a little subterfuge and tell
+	 * the infrastructure code that pages are 512 bytes in size.  This is
+	 * done because during the course of reverse-engineering the device, I
+	 * never observed an instance where an entire 2K "page" was read or
+	 * written as a unit.  Each "sub-page" is always addressed individually,
+	 * its data read/written, and ecc handled before the next "sub-page" is
+	 * addressed.
+	 *
+	 * This requires us to convert addresses passed by the mtd nand
+	 * infrastructure code to those used by the device.
+	 *
+	 * The address that is written to the device consists of four bytes: the
+	 * first two are the 2k page number, and the second is the index into
+	 * the page.  The index is in terms of 16-bit half-words and includes
+	 * the preceeding oob data, so e.g., the index into the second
+	 * "sub-page" is 0x108, and the full device address of the start of mtd
+	 * page 0x201 is 0x00800108.
+	 */
+	int g4_page = page / 4;	                      /* device's 2K page */
+	int g4_index = (page % 4) * 0x108 + column/2; /* offset into page */
+	return (g4_page << 16) | g4_index;	      /* pack */
+}
+
+static void docg4_command(struct mtd_info *mtd, unsigned command, int column,
+			  int page_addr)
+{
+	/* handle standard nand commands */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	uint32_t g4_addr = mtd_to_docg4_address(page_addr, column);
+
+	dev_dbg(doc->dev, "%s %x, page_addr=%x, column=%x\n",
+	      __func__, command, page_addr, column);
+
+	/*
+	 * Save the command and its arguments.  This enables emulation of
+	 * standard flash devices, and also some optimizations.
+	 */
+	doc->last_command.command = command;
+	doc->last_command.column = column;
+	doc->last_command.page = page_addr;
+
+	switch (command) {
+
+	case NAND_CMD_RESET:
+		reset(mtd);
+		break;
+
+	case NAND_CMD_READ0:
+		read_page_prologue(mtd, g4_addr);
+		break;
+
+	case NAND_CMD_STATUS:
+		/* next call to read_byte() will expect a status */
+		break;
+
+	case NAND_CMD_SEQIN:
+		write_page_prologue(mtd, g4_addr);
+
+		/* hack for deferred write of oob bytes */
+		if (doc->oob_page == page_addr)
+			memcpy(nand->oob_poi, doc->oob_buf, 16);
+		break;
+
+	case NAND_CMD_PAGEPROG:
+		pageprog(mtd);
+		break;
+
+	/* we don't expect these, based on review of nand_base.c */
+	case NAND_CMD_READOOB:
+	case NAND_CMD_READID:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+		dev_warn(doc->dev, "docg4_command: "
+			 "unexpected nand command 0x%x\n", command);
+		break;
+
+	}
+}
+
+static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
+		     uint8_t *buf, int page, bool use_ecc)
+{
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint16_t status, edc_err, *buf16;
+
+	dev_dbg(doc->dev, "%s: page %08x\n", __func__, page);
+
+	writew(DOC_ECCCONF0_READ_MODE |
+	       DOC_ECCCONF0_ECC_ENABLE |
+	       DOC_ECCCONF0_UNKNOWN |
+	       DOCG4_BCH_SIZE,
+	       docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	/* the 1st byte from the I/O reg is a status; the rest is page data */
+	status = readw(docptr + DOC_IOSPACE_DATA);
+	if (status & DOCG4_READ_ERROR) {
+		dev_err(doc->dev,
+			"docg4_read_page: bad status: 0x%02x\n", status);
+		writew(0, docptr + DOC_DATAEND);
+		return -EIO;
+	}
+
+	dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status);
+
+	docg4_read_buf(mtd, buf, DOCG4_PAGE_SIZE); /* read the page data */
+
+	/*
+	 * Diskonchips read oob immediately after a page read.  Mtd
+	 * infrastructure issues a separate command for reading oob after the
+	 * page is read.  So we save the oob bytes in a local buffer and just
+	 * copy it if the next command reads oob from the same page.
+	 */
+
+	/* first 14 oob bytes read from I/O reg */
+	docg4_read_buf(mtd, doc->oob_buf, 14);
+
+	/* last 2 read from another reg */
+	buf16 = (uint16_t *)(doc->oob_buf + 14);
+	*buf16 = readw(docptr + DOCG4_MYSTERY_REG);
+
+	write_nop(docptr);
+
+	if (likely(use_ecc == true)) {
+
+		/* read the register that tells us if bitflip(s) detected  */
+		edc_err = readw(docptr + DOC_ECCCONF1);
+		edc_err = readw(docptr + DOC_ECCCONF1);
+		dev_dbg(doc->dev, "%s: edc_err = 0x%02x\n", __func__, edc_err);
+
+		/* If bitflips are reported, attempt to correct with ecc */
+		if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) {
+			int bits_corrected = correct_data(mtd, buf, page);
+			if (bits_corrected == -EBADMSG)
+				mtd->ecc_stats.failed++;
+			else
+				mtd->ecc_stats.corrected += bits_corrected;
+		}
+	}
+
+	writew(0, docptr + DOC_DATAEND);
+	return 0;
+}
+
+
+static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+			       uint8_t *buf, int page)
+{
+	return read_page(mtd, nand, buf, page, false);
+}
+
+static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
+			   uint8_t *buf, int page)
+{
+	return read_page(mtd, nand, buf, page, true);
+}
+
+static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
+			  int page, int sndcmd)
+{
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint16_t status;
+
+	dev_dbg(doc->dev, "%s: page %x\n", __func__, page);
+
+	/*
+	 * Oob bytes are read as part of a normal page read.  If the previous
+	 * nand command was a read of the page whose oob is now being read, just
+	 * copy the oob bytes that we saved in a local buffer and avoid a
+	 * separate oob read.
+	 */
+	if (doc->last_command.command == NAND_CMD_READ0 &&
+	    doc->last_command.page == page) {
+		memcpy(nand->oob_poi, doc->oob_buf, 16);
+		return 0;
+	}
+
+	/*
+	 * Separate read of oob data only.
+	 */
+	docg4_command(mtd, NAND_CMD_READ0, nand->ecc.size, page);
+
+	writew(DOC_ECCCONF0_READ_MODE | DOCG4_OOB_SIZE, docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	/* the 1st byte from the I/O reg is a status; the rest is oob data */
+	status = readw(docptr + DOC_IOSPACE_DATA);
+	if (status & DOCG4_READ_ERROR) {
+		dev_warn(doc->dev,
+			 "docg4_read_oob failed: status = 0x%02x\n", status);
+		return -EIO;
+	}
+
+	dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status);
+
+	docg4_read_buf(mtd, nand->oob_poi, 16);
+
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	writew(0, docptr + DOC_DATAEND);
+	write_nop(docptr);
+
+	return 0;
+}
+
+static void docg4_erase_block(struct mtd_info *mtd, int page)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint16_t g4_page;
+
+	dev_dbg(doc->dev, "%s: page %04x\n", __func__, page);
+
+	sequence_reset(mtd);
+
+	writew(DOCG4_SEQ_BLOCKERASE, docptr + DOC_FLASHSEQUENCE);
+	writew(DOC_CMD_PROG_BLOCK_ADDR, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+
+	/* only 2 bytes of address are written to specify erase block */
+	g4_page = (uint16_t)(page / 4);  /* to g4's 2k page addressing */
+	writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+	g4_page >>= 8;
+	writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+	write_nop(docptr);
+
+	/* start the erasure */
+	writew(DOC_CMD_ERASECYCLE2, docptr + DOC_FLASHCOMMAND);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	usleep_range(500, 1000); /* erasure is long; take a snooze */
+	poll_status(doc);
+	writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+	writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+	writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+	write_nop(docptr);
+
+	read_progstatus(doc);
+
+	writew(0, docptr + DOC_DATAEND);
+	write_nop(docptr);
+	poll_status(doc);
+	write_nop(docptr);
+}
+
+static void write_page(struct mtd_info *mtd, struct nand_chip *nand,
+		       const uint8_t *buf, bool use_ecc)
+{
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint8_t ecc_buf[8];
+
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	writew(DOC_ECCCONF0_ECC_ENABLE |
+	       DOC_ECCCONF0_UNKNOWN |
+	       DOCG4_BCH_SIZE,
+	       docptr + DOC_ECCCONF0);
+	write_nop(docptr);
+
+	/* write the page data */
+	docg4_write_buf16(mtd, buf, DOCG4_PAGE_SIZE);
+
+	/* oob bytes 0 through 5 are written to I/O reg */
+	docg4_write_buf16(mtd, nand->oob_poi, 6);
+
+	/* oob byte 6 written to a separate reg */
+	writew(nand->oob_poi[6], docptr + DOCG4_OOB_6_7);
+
+	write_nop(docptr);
+	write_nop(docptr);
+
+	/* write hw-generated ecc bytes to oob */
+	if (likely(use_ecc == true)) {
+		/* oob byte 7 is hamming code */
+		uint8_t hamming = readb(docptr + DOC_HAMMINGPARITY);
+		hamming = readb(docptr + DOC_HAMMINGPARITY); /* 2nd read */
+		writew(hamming, docptr + DOCG4_OOB_6_7);
+		write_nop(docptr);
+
+		/* read the 7 bch bytes from ecc regs */
+		read_hw_ecc(docptr, ecc_buf);
+		ecc_buf[7] = 0;         /* clear the "page written" flag */
+	}
+
+	/* write user-supplied bytes to oob */
+	else {
+		writew(nand->oob_poi[7], docptr + DOCG4_OOB_6_7);
+		write_nop(docptr);
+		memcpy(ecc_buf, &nand->oob_poi[8], 8);
+	}
+
+	docg4_write_buf16(mtd, ecc_buf, 8);
+	write_nop(docptr);
+	write_nop(docptr);
+	writew(0, docptr + DOC_DATAEND);
+	write_nop(docptr);
+}
+
+static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+				 const uint8_t *buf)
+{
+	return write_page(mtd, nand, buf, false);
+}
+
+static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
+			     const uint8_t *buf)
+{
+	return write_page(mtd, nand, buf, true);
+}
+
+static int docg4_write_oob(struct mtd_info *mtd, struct nand_chip *nand,
+			   int page)
+{
+	/*
+	 * Writing oob-only is not really supported, because MLC nand must write
+	 * oob bytes at the same time as page data.  Nonetheless, we save the
+	 * oob buffer contents here, and then write it along with the page data
+	 * if the same page is subsequently written.  This allows user space
+	 * utilities that write the oob data prior to the page data to work
+	 * (e.g., nandwrite).  The disdvantage is that, if the intention was to
+	 * write oob only, the operation is quietly ignored.  Also, oob can get
+	 * corrupted if two concurrent processes are running nandwrite.
+	 */
+
+	/* note that bytes 7..14 are hw generated hamming/ecc and overwritten */
+	struct docg4_priv *doc = nand->priv;
+	doc->oob_page = page;
+	memcpy(doc->oob_buf, nand->oob_poi, 16);
+	return 0;
+}
+
+static int __init read_factory_bbt(struct mtd_info *mtd)
+{
+	/*
+	 * The device contains a read-only factory bad block table.  Read it and
+	 * update the memory-based bbt accordingly.
+	 */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	uint32_t g4_addr = mtd_to_docg4_address(DOCG4_FACTORY_BBT_PAGE, 0);
+	uint8_t *buf;
+	int i, block, status;
+
+	buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	read_page_prologue(mtd, g4_addr);
+	status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE);
+	if (status)
+		goto exit;
+
+	/*
+	 * If no memory-based bbt was created, exit.  This will happen if module
+	 * parameter ignore_badblocks is set.  Then why even call this function?
+	 * For an unknown reason, block erase always fails if it's the first
+	 * operation after device power-up.  The above read ensures it never is.
+	 * Ugly, I know.
+	 */
+	if (nand->bbt == NULL)  /* no memory-based bbt */
+		goto exit;
+
+	/*
+	 * Parse factory bbt and update memory-based bbt.  Factory bbt format is
+	 * simple: one bit per block, block numbers increase left to right (msb
+	 * to lsb).  Bit clear means bad block.
+	 */
+	for (i = block = 0; block < DOCG4_NUMBLOCKS; block += 8, i++) {
+		int bitnum;
+		unsigned long bits = ~buf[i];
+		for_each_set_bit(bitnum, &bits, 8) {
+			int badblock = block + 7 - bitnum;
+			nand->bbt[badblock / 4] |=
+				0x03 << ((badblock % 4) * 2);
+			mtd->ecc_stats.badblocks++;
+			dev_notice(doc->dev, "factory-marked bad block: %d\n",
+				   badblock);
+		}
+	}
+ exit:
+	kfree(buf);
+	return status;
+}
+
+static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	/*
+	 * Mark a block as bad.  Bad blocks are marked in the oob area of the
+	 * first page of the block.  The default scan_bbt() in the nand
+	 * infrastructure code works fine for building the memory-based bbt
+	 * during initialization, as does the nand infrastructure function that
+	 * checks if a block is bad by reading the bbt.  This function replaces
+	 * the nand default because writes to oob-only are not supported.
+	 */
+
+	int ret, i;
+	uint8_t *buf;
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	struct nand_bbt_descr *bbtd = nand->badblock_pattern;
+	int block = (int)(ofs >> nand->bbt_erase_shift);
+	int page = (int)(ofs >> nand->page_shift);
+	uint32_t g4_addr = mtd_to_docg4_address(page, 0);
+
+	dev_dbg(doc->dev, "%s: %08llx\n", __func__, ofs);
+
+	if (unlikely(ofs & (DOCG4_BLOCK_SIZE - 1)))
+		dev_warn(doc->dev, "%s: ofs %llx not start of block!\n",
+			 __func__, ofs);
+
+	/* allocate blank buffer for page data */
+	buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	/* update bbt in memory */
+	nand->bbt[block / 4] |= 0x01 << ((block & 0x03) * 2);
+
+	/* write bit-wise negation of pattern to oob buffer */
+	memset(nand->oob_poi, 0xff, mtd->oobsize);
+	for (i = 0; i < bbtd->len; i++)
+		nand->oob_poi[bbtd->offs + i] = ~bbtd->pattern[i];
+
+	/* write first page of block */
+	write_page_prologue(mtd, g4_addr);
+	docg4_write_page(mtd, nand, buf);
+	ret = pageprog(mtd);
+	if (!ret)
+		mtd->ecc_stats.badblocks++;
+
+	kfree(buf);
+
+	return ret;
+}
+
+static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+	/* only called when module_param ignore_badblocks is set */
+	return 0;
+}
+
+static int docg4_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	/*
+	 * Put the device into "deep power-down" mode.  Note that CE# must be
+	 * deasserted for this to take effect.  The xscale, e.g., can be
+	 * configured to float this signal when the processor enters power-down,
+	 * and a suitable pull-up ensures its deassertion.
+	 */
+
+	int i;
+	uint8_t pwr_down;
+	struct docg4_priv *doc = platform_get_drvdata(pdev);
+	void __iomem *docptr = doc->virtadr;
+
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	/* poll the register that tells us we're ready to go to sleep */
+	for (i = 0; i < 10; i++) {
+		pwr_down = readb(docptr + DOC_POWERMODE);
+		if (pwr_down & DOC_POWERDOWN_READY)
+			break;
+		usleep_range(1000, 4000);
+	}
+
+	if (pwr_down & DOC_POWERDOWN_READY) {
+		dev_err(doc->dev, "suspend failed; "
+			"timeout polling DOC_POWERDOWN_READY\n");
+		return -EIO;
+	}
+
+	writew(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN,
+	       docptr + DOC_ASICMODE);
+	writew(~(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN),
+	       docptr + DOC_ASICMODECONFIRM);
+
+	write_nop(docptr);
+
+	return 0;
+}
+
+static int docg4_resume(struct platform_device *pdev)
+{
+
+	/*
+	 * Exit power-down.  Twelve consecutive reads of the address below
+	 * accomplishes this, assuming CE# has been asserted.
+	 */
+
+	struct docg4_priv *doc = platform_get_drvdata(pdev);
+	void __iomem *docptr = doc->virtadr;
+	int i;
+
+	dev_dbg(doc->dev, "%s...\n", __func__);
+
+	for (i = 0; i < 12; i++)
+		readb(docptr + 0x1fff);
+
+	return 0;
+}
+
+static void __init init_mtd_structs(struct mtd_info *mtd)
+{
+	/* initialize mtd and nand data structures */
+
+	/*
+	 * Note that some of the following initializations are not usually
+	 * required within a nand driver because they are performed by the nand
+	 * infrastructure code as part of nand_scan().  In this case they need
+	 * to be initialized here because we skip call to nand_scan_ident() (the
+	 * first half of nand_scan()).  The call to nand_scan_ident() is skipped
+	 * because for this device the chip id is not read in the manner of a
+	 * standard nand device.  Unfortunately, nand_scan_ident() does other
+	 * things as well, such as call nand_set_defaults().
+	 */
+
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+
+	mtd->size = DOCG4_CHIP_SIZE;
+	mtd->name = "Msys_Diskonchip_G4";
+	mtd->writesize = DOCG4_PAGE_SIZE;
+	mtd->erasesize = DOCG4_BLOCK_SIZE;
+	mtd->oobsize = DOCG4_OOB_SIZE;
+	nand->chipsize = DOCG4_CHIP_SIZE;
+	nand->chip_shift = DOCG4_CHIP_SHIFT;
+	nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT;
+	nand->chip_delay = 20;
+	nand->page_shift = DOCG4_PAGE_SHIFT;
+	nand->pagemask = 0x3ffff;
+	nand->badblockpos = NAND_LARGE_BADBLOCK_POS;
+	nand->badblockbits = 8;
+	nand->ecc.layout = &docg4_oobinfo;
+	nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+	nand->ecc.size = DOCG4_PAGE_SIZE;
+	nand->ecc.prepad = 8;
+	nand->ecc.bytes	= 8;
+	nand->ecc.strength = DOCG4_T;
+	nand->options =
+		NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR;
+	nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
+	nand->controller = &nand->hwcontrol;
+	spin_lock_init(&nand->controller->lock);
+	init_waitqueue_head(&nand->controller->wq);
+
+	/* methods */
+	nand->cmdfunc = docg4_command;
+	nand->waitfunc = docg4_wait;
+	nand->select_chip = docg4_select_chip;
+	nand->read_byte = docg4_read_byte;
+	nand->block_markbad = docg4_block_markbad;
+	nand->read_buf = docg4_read_buf;
+	nand->write_buf = docg4_write_buf16;
+	nand->scan_bbt = nand_default_bbt;
+	nand->erase_cmd = docg4_erase_block;
+	nand->ecc.read_page = docg4_read_page;
+	nand->ecc.write_page = docg4_write_page;
+	nand->ecc.read_page_raw = docg4_read_page_raw;
+	nand->ecc.write_page_raw = docg4_write_page_raw;
+	nand->ecc.read_oob = docg4_read_oob;
+	nand->ecc.write_oob = docg4_write_oob;
+
+	/*
+	 * The way the nand infrastructure code is written, a memory-based bbt
+	 * is not created if NAND_SKIP_BBTSCAN is set.  With no memory bbt,
+	 * nand->block_bad() is used.  So when ignoring bad blocks, we skip the
+	 * scan and define a dummy block_bad() which always returns 0.
+	 */
+	if (ignore_badblocks) {
+		nand->options |= NAND_SKIP_BBTSCAN;
+		nand->block_bad	= docg4_block_neverbad;
+	}
+
+}
+
+static int __init read_id_reg(struct mtd_info *mtd)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct docg4_priv *doc = nand->priv;
+	void __iomem *docptr = doc->virtadr;
+	uint16_t id1, id2;
+
+	/* check for presence of g4 chip by reading id registers */
+	id1 = readw(docptr + DOC_CHIPID);
+	id1 = readw(docptr + DOCG4_MYSTERY_REG);
+	id2 = readw(docptr + DOC_CHIPID_INV);
+	id2 = readw(docptr + DOCG4_MYSTERY_REG);
+
+	if (id1 == DOCG4_IDREG1_VALUE && id2 == DOCG4_IDREG2_VALUE) {
+		dev_info(doc->dev,
+			 "NAND device: 128MiB Diskonchip G4 detected\n");
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int __init probe_docg4(struct platform_device *pdev)
+{
+	struct mtd_info *mtd;
+	struct nand_chip *nand;
+	void __iomem *virtadr;
+	struct docg4_priv *doc;
+	int len, retval;
+	struct resource *r;
+	struct device *dev = &pdev->dev;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(dev, "no io memory resource defined!\n");
+		return -ENODEV;
+	}
+
+	virtadr = ioremap(r->start, resource_size(r));
+	if (!virtadr) {
+		dev_err(dev, "Diskonchip ioremap failed: %pR\n", r);
+		return -EIO;
+	}
+
+	len = sizeof(struct mtd_info) + sizeof(struct nand_chip) +
+		sizeof(struct docg4_priv);
+	mtd = kzalloc(len, GFP_KERNEL);
+	if (mtd == NULL) {
+		retval = -ENOMEM;
+		goto fail;
+	}
+	nand = (struct nand_chip *) (mtd + 1);
+	doc = (struct docg4_priv *) (nand + 1);
+	mtd->priv = nand;
+	nand->priv = doc;
+	mtd->owner = THIS_MODULE;
+	doc->virtadr = virtadr;
+	doc->dev = dev;
+
+	init_mtd_structs(mtd);
+
+	/* initialize kernel bch algorithm */
+	doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY);
+	if (doc->bch == NULL) {
+		retval = -EINVAL;
+		goto fail;
+	}
+
+	platform_set_drvdata(pdev, doc);
+
+	reset(mtd);
+	retval = read_id_reg(mtd);
+	if (retval == -ENODEV) {
+		dev_warn(dev, "No diskonchip G4 device found.\n");
+		goto fail;
+	}
+
+	retval = nand_scan_tail(mtd);
+	if (retval)
+		goto fail;
+
+	retval = read_factory_bbt(mtd);
+	if (retval)
+		goto fail;
+
+	retval = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
+	if (retval)
+		goto fail;
+
+	doc->mtd = mtd;
+	return 0;
+
+ fail:
+	iounmap(virtadr);
+	if (mtd) {
+		/* re-declarations avoid compiler warning */
+		struct nand_chip *nand = mtd->priv;
+		struct docg4_priv *doc = nand->priv;
+		nand_release(mtd); /* deletes partitions and mtd devices */
+		platform_set_drvdata(pdev, NULL);
+		free_bch(doc->bch);
+		kfree(mtd);
+	}
+
+	return retval;
+}
+
+static int __exit cleanup_docg4(struct platform_device *pdev)
+{
+	struct docg4_priv *doc = platform_get_drvdata(pdev);
+	nand_release(doc->mtd);
+	platform_set_drvdata(pdev, NULL);
+	free_bch(doc->bch);
+	kfree(doc->mtd);
+	iounmap(doc->virtadr);
+	return 0;
+}
+
+static struct platform_driver docg4_driver = {
+	.driver		= {
+		.name	= "docg4",
+		.owner	= THIS_MODULE,
+	},
+	.suspend	= docg4_suspend,
+	.resume		= docg4_resume,
+	.remove		= __exit_p(cleanup_docg4),
+};
+
+static int __init docg4_init(void)
+{
+	return platform_driver_probe(&docg4_driver, probe_docg4);
+}
+
+static void __exit docg4_exit(void)
+{
+	platform_driver_unregister(&docg4_driver);
+}
+
+module_init(docg4_init);
+module_exit(docg4_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Dunn");
+MODULE_DESCRIPTION("M-Systems DiskOnChip G4 device driver");

drivers/mtd/nand/fsl_elbc_nand.c

@@ -813,6 +813,12 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 				&fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0;
 		chip->ecc.size = 512;
 		chip->ecc.bytes = 3;
+		chip->ecc.strength = 1;
+		/*
+		 * FIXME: can hardware ecc correct 4 bitflips if page size is
+		 * 2k?  Then does hardware report number of corrections for this
+		 * case?  If so, ecc_stats reporting needs to be fixed as well.
+		 */
 	} else {
 		/* otherwise fall back to default software ECC */
 		chip->ecc.mode = NAND_ECC_SOFT;

drivers/mtd/nand/gpmi-nand/gpmi-lib.c

@@ -848,7 +848,10 @@ int gpmi_send_command(struct gpmi_nand_data *this)
 
 	sg_init_one(sgl, this->cmd_buffer, this->command_length);
 	dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
-	desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_MEM_TO_DEV, 1);
+	desc = dmaengine_prep_slave_sg(channel,
+				sgl, 1, DMA_MEM_TO_DEV,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -889,7 +892,8 @@ int gpmi_send_data(struct gpmi_nand_data *this)
 	/* [2] send DMA request */
 	prepare_data_dma(this, DMA_TO_DEVICE);
 	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
-						1, DMA_MEM_TO_DEV, 1);
+					1, DMA_MEM_TO_DEV,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -925,7 +929,8 @@ int gpmi_read_data(struct gpmi_nand_data *this)
 	/* [2] : send DMA request */
 	prepare_data_dma(this, DMA_FROM_DEVICE);
 	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
-					1, DMA_DEV_TO_MEM, 1);
+					1, DMA_DEV_TO_MEM,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -970,8 +975,10 @@ int gpmi_send_page(struct gpmi_nand_data *this,
 	pio[4] = payload;
 	pio[5] = auxiliary;
 
-	desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
+	desc = dmaengine_prep_slave_sg(channel,
+					(struct scatterlist *)pio,
+					ARRAY_SIZE(pio), DMA_TRANS_NONE,
+					DMA_CTRL_ACK);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -1035,7 +1042,8 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 	pio[5] = auxiliary;
 	desc = dmaengine_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_TRANS_NONE, 1);
+					ARRAY_SIZE(pio), DMA_TRANS_NONE,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -1052,9 +1060,11 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 		| BF_GPMI_CTRL0_ADDRESS(address)
 		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
 	pio[1] = 0;
+	pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */
 	desc = dmaengine_prep_slave_sg(channel,
-				(struct scatterlist *)pio, 2,
-				DMA_TRANS_NONE, 1);
+				(struct scatterlist *)pio, 3,
+				DMA_TRANS_NONE,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		pr_err("step 3 error\n");
 		return -1;

drivers/mtd/nand/gpmi-nand/gpmi-nand.c

@@ -1124,7 +1124,7 @@ static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
 		chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
 	/* Do we have a flash based bad block table ? */
-	if (chip->options & NAND_BBT_USE_FLASH)
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
 		ret = nand_update_bbt(mtd, ofs);
 	else {
 		chipnr = (int)(ofs >> chip->chip_shift);
@@ -1155,7 +1155,7 @@ static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	return ret;
 }
 
-static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this)
+static int nand_boot_set_geometry(struct gpmi_nand_data *this)
 {
 	struct boot_rom_geometry *geometry = &this->rom_geometry;
 
@@ -1182,7 +1182,7 @@ static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this)
 }
 
 static const char  *fingerprint = "STMP";
-static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this)
+static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
 {
 	struct boot_rom_geometry *rom_geo = &this->rom_geometry;
 	struct device *dev = this->dev;
@@ -1239,7 +1239,7 @@ static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this)
 }
 
 /* Writes a transcription stamp. */
-static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this)
+static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
 {
 	struct device *dev = this->dev;
 	struct boot_rom_geometry *rom_geo = &this->rom_geometry;
@@ -1322,7 +1322,7 @@ static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this)
 	return 0;
 }
 
-static int __devinit mx23_boot_init(struct gpmi_nand_data  *this)
+static int mx23_boot_init(struct gpmi_nand_data  *this)
 {
 	struct device *dev = this->dev;
 	struct nand_chip *chip = &this->nand;
@@ -1391,7 +1391,7 @@ static int __devinit mx23_boot_init(struct gpmi_nand_data  *this)
 	return 0;
 }
 
-static int __devinit nand_boot_init(struct gpmi_nand_data  *this)
+static int nand_boot_init(struct gpmi_nand_data  *this)
 {
 	nand_boot_set_geometry(this);
 
@@ -1401,7 +1401,7 @@ static int __devinit nand_boot_init(struct gpmi_nand_data  *this)
 	return 0;
 }
 
-static int __devinit gpmi_set_geometry(struct gpmi_nand_data *this)
+static int gpmi_set_geometry(struct gpmi_nand_data *this)
 {
 	int ret;
 

drivers/mtd/nand/gpmi-nand/gpmi-nand.h

@@ -20,7 +20,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <mach/dma.h>
+#include <linux/fsl/mxs-dma.h>
 
 struct resources {
 	void          *gpmi_regs;

drivers/mtd/nand/h1910.c

@@ -135,8 +135,8 @@ static int __init h1910_init(void)
 	}
 
 	/* Register the partitions */
-	mtd_device_parse_register(h1910_nand_mtd, NULL, 0,
-			partition_info, NUM_PARTITIONS);
+	mtd_device_parse_register(h1910_nand_mtd, NULL, NULL, partition_info,
+				  NUM_PARTITIONS);
 
 	/* Return happy */
 	return 0;

drivers/mtd/nand/jz4740_nand.c

@@ -332,6 +332,11 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
 	chip->ecc.mode		= NAND_ECC_HW_OOB_FIRST;
 	chip->ecc.size		= 512;
 	chip->ecc.bytes		= 9;
+	chip->ecc.strength	= 2;
+	/*
+	 * FIXME: ecc_strength value of 2 bits per 512 bytes of data is a
+	 * conservative guess, given 9 ecc bytes and reed-solomon alg.
+	 */
 
 	if (pdata)
 		chip->ecc.layout = pdata->ecc_layout;
@@ -367,9 +372,9 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
 		goto err_gpio_free;
 	}
 
-	ret = mtd_device_parse_register(mtd, NULL, 0,
-			pdata ? pdata->partitions : NULL,
-			pdata ? pdata->num_partitions : 0);
+	ret = mtd_device_parse_register(mtd, NULL, NULL,
+					pdata ? pdata->partitions : NULL,
+					pdata ? pdata->num_partitions : 0);
 
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add mtd device\n");

drivers/mtd/nand/mxc_nand.c

@@ -1225,9 +1225,16 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		goto escan;
 	}
 
+	if (this->ecc.mode == NAND_ECC_HW) {
+		if (nfc_is_v1())
+			this->ecc.strength = 1;
+		else
+			this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
+	}
+
 	/* Register the partitions */
-	mtd_device_parse_register(mtd, part_probes, 0,
-			pdata->parts, pdata->nr_parts);
+	mtd_device_parse_register(mtd, part_probes, NULL, pdata->parts,
+				  pdata->nr_parts);
 
 	platform_set_drvdata(pdev, host);
 

drivers/mtd/nand/nand_base.c

@@ -123,12 +123,6 @@ static int check_offs_len(struct mtd_info *mtd,
 		ret = -EINVAL;
 	}
 
-	/* Do not allow past end of device */
-	if (ofs + len > mtd->size) {
-		pr_debug("%s: past end of device\n", __func__);
-		ret = -EINVAL;
-	}
-
 	return ret;
 }
 
@@ -338,7 +332,7 @@ static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
  */
 static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 {
-	int page, chipnr, res = 0;
+	int page, chipnr, res = 0, i = 0;
 	struct nand_chip *chip = mtd->priv;
 	u16 bad;
 
@@ -356,23 +350,29 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 		chip->select_chip(mtd, chipnr);
 	}
 
-	if (chip->options & NAND_BUSWIDTH_16) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE,
-			      page);
-		bad = cpu_to_le16(chip->read_word(mtd));
-		if (chip->badblockpos & 0x1)
-			bad >>= 8;
-		else
-			bad &= 0xFF;
-	} else {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page);
-		bad = chip->read_byte(mtd);
-	}
+	do {
+		if (chip->options & NAND_BUSWIDTH_16) {
+			chip->cmdfunc(mtd, NAND_CMD_READOOB,
+					chip->badblockpos & 0xFE, page);
+			bad = cpu_to_le16(chip->read_word(mtd));
+			if (chip->badblockpos & 0x1)
+				bad >>= 8;
+			else
+				bad &= 0xFF;
+		} else {
+			chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos,
+					page);
+			bad = chip->read_byte(mtd);
+		}
 
-	if (likely(chip->badblockbits == 8))
-		res = bad != 0xFF;
-	else
-		res = hweight8(bad) < chip->badblockbits;
+		if (likely(chip->badblockbits == 8))
+			res = bad != 0xFF;
+		else
+			res = hweight8(bad) < chip->badblockbits;
+		ofs += mtd->writesize;
+		page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+		i++;
+	} while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
 
 	if (getchip)
 		nand_release_device(mtd);
@@ -386,51 +386,79 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
  * @ofs: offset from device start
  *
  * This is the default implementation, which can be overridden by a hardware
- * specific driver.
+ * specific driver. We try operations in the following order, according to our
+ * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
+ *  (1) erase the affected block, to allow OOB marker to be written cleanly
+ *  (2) update in-memory BBT
+ *  (3) write bad block marker to OOB area of affected block
+ *  (4) update flash-based BBT
+ * Note that we retain the first error encountered in (3) or (4), finish the
+ * procedures, and dump the error in the end.
 */
 static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct nand_chip *chip = mtd->priv;
 	uint8_t buf[2] = { 0, 0 };
-	int block, ret, i = 0;
+	int block, res, ret = 0, i = 0;
+	int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM);
 
-	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
-		ofs += mtd->erasesize - mtd->writesize;
+	if (write_oob) {
+		struct erase_info einfo;
+
+		/* Attempt erase before marking OOB */
+		memset(&einfo, 0, sizeof(einfo));
+		einfo.mtd = mtd;
+		einfo.addr = ofs;
+		einfo.len = 1 << chip->phys_erase_shift;
+		nand_erase_nand(mtd, &einfo, 0);
+	}
 
 	/* Get block number */
 	block = (int)(ofs >> chip->bbt_erase_shift);
+	/* Mark block bad in memory-based BBT */
 	if (chip->bbt)
 		chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
-	/* Do we have a flash based bad block table? */
-	if (chip->bbt_options & NAND_BBT_USE_FLASH)
-		ret = nand_update_bbt(mtd, ofs);
-	else {
+	/* Write bad block marker to OOB */
+	if (write_oob) {
 		struct mtd_oob_ops ops;
+		loff_t wr_ofs = ofs;
 
 		nand_get_device(chip, mtd, FL_WRITING);
 
-		/*
-		 * Write to first two pages if necessary. If we write to more
-		 * than one location, the first error encountered quits the
-		 * procedure. We write two bytes per location, so we dont have
-		 * to mess with 16 bit access.
-		 */
-		ops.len = ops.ooblen = 2;
 		ops.datbuf = NULL;
 		ops.oobbuf = buf;
-		ops.ooboffs = chip->badblockpos & ~0x01;
+		ops.ooboffs = chip->badblockpos;
+		if (chip->options & NAND_BUSWIDTH_16) {
+			ops.ooboffs &= ~0x01;
+			ops.len = ops.ooblen = 2;
+		} else {
+			ops.len = ops.ooblen = 1;
+		}
 		ops.mode = MTD_OPS_PLACE_OOB;
+
+		/* Write to first/last page(s) if necessary */
+		if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+			wr_ofs += mtd->erasesize - mtd->writesize;
 		do {
-			ret = nand_do_write_oob(mtd, ofs, &ops);
+			res = nand_do_write_oob(mtd, wr_ofs, &ops);
+			if (!ret)
+				ret = res;
 
 			i++;
-			ofs += mtd->writesize;
-		} while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) &&
-				i < 2);
+			wr_ofs += mtd->writesize;
+		} while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
 
 		nand_release_device(mtd);
 	}
+
+	/* Update flash-based bad block table */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+		res = nand_update_bbt(mtd, ofs);
+		if (!ret)
+			ret = res;
+	}
+
 	if (!ret)
 		mtd->ecc_stats.badblocks++;
 
@@ -1586,25 +1614,14 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
 	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Do not allow reads past end of device */
-	if ((from + len) > mtd->size)
-		return -EINVAL;
-	if (!len)
-		return 0;
-
 	nand_get_device(chip, mtd, FL_READING);
-
 	ops.len = len;
 	ops.datbuf = buf;
 	ops.oobbuf = NULL;
 	ops.mode = 0;
-
 	ret = nand_do_read_ops(mtd, from, &ops);
-
 	*retlen = ops.retlen;
-
 	nand_release_device(mtd);
-
 	return ret;
 }
 
@@ -2293,12 +2310,6 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Do not allow reads past end of device */
-	if ((to + len) > mtd->size)
-		return -EINVAL;
-	if (!len)
-		return 0;
-
 	/* Wait for the device to get ready */
 	panic_nand_wait(mtd, chip, 400);
 
@@ -2333,25 +2344,14 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Do not allow reads past end of device */
-	if ((to + len) > mtd->size)
-		return -EINVAL;
-	if (!len)
-		return 0;
-
 	nand_get_device(chip, mtd, FL_WRITING);
-
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
 	ops.oobbuf = NULL;
 	ops.mode = 0;
-
 	ret = nand_do_write_ops(mtd, to, &ops);
-
 	*retlen = ops.retlen;
-
 	nand_release_device(mtd);
-
 	return ret;
 }
 
@@ -2550,8 +2550,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 	if (check_offs_len(mtd, instr->addr, instr->len))
 		return -EINVAL;
 
-	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
-
 	/* Grab the lock and see if the device is available */
 	nand_get_device(chip, mtd, FL_ERASING);
 
@@ -2715,10 +2713,6 @@ static void nand_sync(struct mtd_info *mtd)
  */
 static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
 {
-	/* Check for invalid offset */
-	if (offs > mtd->size)
-		return -EINVAL;
-
 	return nand_block_checkbad(mtd, offs, 1, 0);
 }
 
@@ -2857,7 +2851,6 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
 		return 0;
 
-	pr_info("ONFI flash detected\n");
 	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
 	for (i = 0; i < 3; i++) {
 		chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
@@ -2898,7 +2891,8 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 	mtd->writesize = le32_to_cpu(p->byte_per_page);
 	mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
 	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
-	chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize;
+	chip->chipsize = le32_to_cpu(p->blocks_per_lun);
+	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
 	*busw = 0;
 	if (le16_to_cpu(p->features) & 1)
 		*busw = NAND_BUSWIDTH_16;
@@ -2907,6 +2901,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 	chip->options |= (NAND_NO_READRDY |
 			NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK;
 
+	pr_info("ONFI flash detected\n");
 	return 1;
 }
 
@@ -3238,6 +3233,10 @@ int nand_scan_tail(struct mtd_info *mtd)
 	int i;
 	struct nand_chip *chip = mtd->priv;
 
+	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
+	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+			!(chip->bbt_options & NAND_BBT_USE_FLASH));
+
 	if (!(chip->options & NAND_OWN_BUFFERS))
 		chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
 	if (!chip->buffers)
@@ -3350,6 +3349,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		if (!chip->ecc.size)
 			chip->ecc.size = 256;
 		chip->ecc.bytes = 3;
+		chip->ecc.strength = 1;
 		break;
 
 	case NAND_ECC_SOFT_BCH:
@@ -3384,6 +3384,8 @@ int nand_scan_tail(struct mtd_info *mtd)
 			pr_warn("BCH ECC initialization failed!\n");
 			BUG();
 		}
+		chip->ecc.strength =
+			chip->ecc.bytes*8 / fls(8*chip->ecc.size);
 		break;
 
 	case NAND_ECC_NONE:
@@ -3397,6 +3399,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		chip->ecc.write_oob = nand_write_oob_std;
 		chip->ecc.size = mtd->writesize;
 		chip->ecc.bytes = 0;
+		chip->ecc.strength = 0;
 		break;
 
 	default:
@@ -3461,25 +3464,26 @@ int nand_scan_tail(struct mtd_info *mtd)
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
 						MTD_CAP_NANDFLASH;
-	mtd->erase = nand_erase;
-	mtd->point = NULL;
-	mtd->unpoint = NULL;
-	mtd->read = nand_read;
-	mtd->write = nand_write;
-	mtd->panic_write = panic_nand_write;
-	mtd->read_oob = nand_read_oob;
-	mtd->write_oob = nand_write_oob;
-	mtd->sync = nand_sync;
-	mtd->lock = NULL;
-	mtd->unlock = NULL;
-	mtd->suspend = nand_suspend;
-	mtd->resume = nand_resume;
-	mtd->block_isbad = nand_block_isbad;
-	mtd->block_markbad = nand_block_markbad;
+	mtd->_erase = nand_erase;
+	mtd->_point = NULL;
+	mtd->_unpoint = NULL;
+	mtd->_read = nand_read;
+	mtd->_write = nand_write;
+	mtd->_panic_write = panic_nand_write;
+	mtd->_read_oob = nand_read_oob;
+	mtd->_write_oob = nand_write_oob;
+	mtd->_sync = nand_sync;
+	mtd->_lock = NULL;
+	mtd->_unlock = NULL;
+	mtd->_suspend = nand_suspend;
+	mtd->_resume = nand_resume;
+	mtd->_block_isbad = nand_block_isbad;
+	mtd->_block_markbad = nand_block_markbad;
 	mtd->writebufsize = mtd->writesize;
 
-	/* propagate ecc.layout to mtd_info */
+	/* propagate ecc info to mtd_info */
 	mtd->ecclayout = chip->ecc.layout;
+	mtd->ecc_strength = chip->ecc.strength * chip->ecc.steps;
 
 	/* Check, if we should skip the bad block table scan */
 	if (chip->options & NAND_SKIP_BBTSCAN)

drivers/mtd/nand/ndfc.c

@@ -179,6 +179,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
 	chip->ecc.mode = NAND_ECC_HW;
 	chip->ecc.size = 256;
 	chip->ecc.bytes = 3;
+	chip->ecc.strength = 1;
 	chip->priv = ndfc;
 
 	ndfc->mtd.priv = chip;

drivers/mtd/nand/omap2.c

@@ -1058,6 +1058,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 		(pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) {
 		info->nand.ecc.bytes            = 3;
 		info->nand.ecc.size             = 512;
+		info->nand.ecc.strength         = 1;
 		info->nand.ecc.calculate        = omap_calculate_ecc;
 		info->nand.ecc.hwctl            = omap_enable_hwecc;
 		info->nand.ecc.correct          = omap_correct_data;
@@ -1101,8 +1102,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 		goto out_release_mem_region;
 	}
 
-	mtd_device_parse_register(&info->mtd, NULL, 0,
-			pdata->parts, pdata->nr_parts);
+	mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts,
+				  pdata->nr_parts);
 
 	platform_set_drvdata(pdev, &info->mtd);
 

drivers/mtd/nand/orion_nand.c

@@ -129,8 +129,8 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	}
 
 	mtd->name = "orion_nand";
-	ret = mtd_device_parse_register(mtd, NULL, 0,
-			board->parts, board->nr_parts);
+	ret = mtd_device_parse_register(mtd, NULL, NULL, board->parts,
+					board->nr_parts);
 	if (ret) {
 		nand_release(mtd);
 		goto no_dev;

drivers/mtd/nand/plat_nand.c

@@ -99,8 +99,9 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 	}
 
 	err = mtd_device_parse_register(&data->mtd,
-			pdata->chip.part_probe_types, 0,
-			pdata->chip.partitions, pdata->chip.nr_partitions);
+					pdata->chip.part_probe_types, NULL,
+					pdata->chip.partitions,
+					pdata->chip.nr_partitions);
 
 	if (!err)
 		return err;

drivers/mtd/nand/ppchameleonevb.c

@@ -275,11 +275,10 @@ static int __init ppchameleonevb_init(void)
 	ppchameleon_mtd->name = "ppchameleon-nand";
 
 	/* Register the partitions */
-	mtd_device_parse_register(ppchameleon_mtd, NULL, 0,
-			ppchameleon_mtd->size == NAND_SMALL_SIZE ?
-				partition_info_me :
-				partition_info_hi,
-			NUM_PARTITIONS);
+	mtd_device_parse_register(ppchameleon_mtd, NULL, NULL,
+				  ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+					partition_info_me : partition_info_hi,
+				  NUM_PARTITIONS);
 
  nand_evb_init:
 	/****************************
@@ -365,11 +364,10 @@ static int __init ppchameleonevb_init(void)
 	ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
 
 	/* Register the partitions */
-	mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0,
-			ppchameleon_mtd->size == NAND_SMALL_SIZE ?
-				partition_info_me :
-				partition_info_hi,
-			NUM_PARTITIONS);
+	mtd_device_parse_register(ppchameleonevb_mtd, NULL, NULL,
+				  ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+				  partition_info_me : partition_info_hi,
+				  NUM_PARTITIONS);
 
 	/* Return happy */
 	return 0;

drivers/mtd/nand/pxa3xx_nand.c

@@ -1002,6 +1002,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
 KEEP_CONFIG:
 	chip->ecc.mode = NAND_ECC_HW;
 	chip->ecc.size = host->page_size;
+	chip->ecc.strength = 1;
 
 	chip->options = NAND_NO_AUTOINCR;
 	chip->options |= NAND_NO_READRDY;
@@ -1228,8 +1229,9 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
 			continue;
 		}
 
-		ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0,
-				pdata->parts[cs], pdata->nr_parts[cs]);
+		ret = mtd_device_parse_register(info->host[cs]->mtd, NULL,
+						NULL, pdata->parts[cs],
+						pdata->nr_parts[cs]);
 		if (!ret)
 			probe_success = 1;
 	}

drivers/mtd/nand/r852.c

@@ -891,6 +891,7 @@ int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
 	chip->ecc.size = R852_DMA_LEN;
 	chip->ecc.bytes = SM_OOB_SIZE;
+	chip->ecc.strength = 2;
 	chip->ecc.hwctl = r852_ecc_hwctl;
 	chip->ecc.calculate = r852_ecc_calculate;
 	chip->ecc.correct = r852_ecc_correct;

drivers/mtd/nand/rtc_from4.c

@@ -527,6 +527,7 @@ static int __init rtc_from4_init(void)
 	this->ecc.mode = NAND_ECC_HW_SYNDROME;
 	this->ecc.size = 512;
 	this->ecc.bytes = 8;
+	this->ecc.strength = 3;
 	/* return the status of extra status and ECC checks */
 	this->errstat = rtc_from4_errstat;
 	/* set the nand_oobinfo to support FPGA H/W error detection */

drivers/mtd/nand/s3c2410.c

@@ -751,8 +751,8 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 	if (set)
 		mtd->mtd.name = set->name;
 
-	return mtd_device_parse_register(&mtd->mtd, NULL, 0,
-			set->partitions, set->nr_partitions);
+	return mtd_device_parse_register(&mtd->mtd, NULL, NULL,
+					 set->partitions, set->nr_partitions);
 }
 
 /**
@@ -823,6 +823,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 		chip->ecc.calculate = s3c2410_nand_calculate_ecc;
 		chip->ecc.correct   = s3c2410_nand_correct_data;
 		chip->ecc.mode	    = NAND_ECC_HW;
+		chip->ecc.strength  = 1;
 
 		switch (info->cpu_type) {
 		case TYPE_S3C2410:

drivers/mtd/nand/sh_flctl.c

@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 
 #include <linux/mtd/mtd.h>
@@ -283,7 +284,7 @@ static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
 static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
-	uint32_t flcmncr_val = readl(FLCMNCR(flctl)) & ~SEL_16BIT;
+	uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT;
 	uint32_t flcmdcr_val, addr_len_bytes = 0;
 
 	/* Set SNAND bit if page size is 2048byte */
@@ -303,6 +304,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
 		break;
 	case NAND_CMD_READ0:
 	case NAND_CMD_READOOB:
+	case NAND_CMD_RNDOUT:
 		addr_len_bytes = flctl->rw_ADRCNT;
 		flcmdcr_val |= CDSRC_E;
 		if (flctl->chip.options & NAND_BUSWIDTH_16)
@@ -320,6 +322,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
 		break;
 	case NAND_CMD_READID:
 		flcmncr_val &= ~SNAND_E;
+		flcmdcr_val |= CDSRC_E;
 		addr_len_bytes = ADRCNT_1;
 		break;
 	case NAND_CMD_STATUS:
@@ -513,6 +516,8 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
 	uint32_t read_cmd = 0;
 
+	pm_runtime_get_sync(&flctl->pdev->dev);
+
 	flctl->read_bytes = 0;
 	if (command != NAND_CMD_PAGEPROG)
 		flctl->index = 0;
@@ -525,7 +530,6 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 			execmd_read_page_sector(mtd, page_addr);
 			break;
 		}
-		empty_fifo(flctl);
 		if (flctl->page_size)
 			set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
 				| command);
@@ -547,7 +551,6 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 			break;
 		}
 
-		empty_fifo(flctl);
 		if (flctl->page_size) {
 			set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
 				| NAND_CMD_READ0);
@@ -559,15 +562,35 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		flctl->read_bytes = mtd->oobsize;
 		goto read_normal_exit;
 
+	case NAND_CMD_RNDOUT:
+		if (flctl->hwecc)
+			break;
+
+		if (flctl->page_size)
+			set_cmd_regs(mtd, command, (NAND_CMD_RNDOUTSTART << 8)
+				| command);
+		else
+			set_cmd_regs(mtd, command, command);
+
+		set_addr(mtd, column, 0);
+
+		flctl->read_bytes = mtd->writesize + mtd->oobsize - column;
+		goto read_normal_exit;
+
 	case NAND_CMD_READID:
-		empty_fifo(flctl);
 		set_cmd_regs(mtd, command, command);
-		set_addr(mtd, 0, 0);
 
-		flctl->read_bytes = 4;
+		/* READID is always performed using an 8-bit bus */
+		if (flctl->chip.options & NAND_BUSWIDTH_16)
+			column <<= 1;
+		set_addr(mtd, column, 0);
+
+		flctl->read_bytes = 8;
 		writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+		empty_fifo(flctl);
 		start_translation(flctl);
-		read_datareg(flctl, 0);	/* read and end */
+		read_fiforeg(flctl, flctl->read_bytes, 0);
+		wait_completion(flctl);
 		break;
 
 	case NAND_CMD_ERASE1:
@@ -650,29 +673,55 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	default:
 		break;
 	}
-	return;
+	goto runtime_exit;
 
 read_normal_exit:
 	writel(flctl->read_bytes, FLDTCNTR(flctl));	/* set read size */
+	empty_fifo(flctl);
 	start_translation(flctl);
 	read_fiforeg(flctl, flctl->read_bytes, 0);
 	wait_completion(flctl);
+runtime_exit:
+	pm_runtime_put_sync(&flctl->pdev->dev);
 	return;
 }
 
 static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
-	uint32_t flcmncr_val = readl(FLCMNCR(flctl));
+	int ret;
 
 	switch (chipnr) {
 	case -1:
-		flcmncr_val &= ~CE0_ENABLE;
-		writel(flcmncr_val, FLCMNCR(flctl));
+		flctl->flcmncr_base &= ~CE0_ENABLE;
+
+		pm_runtime_get_sync(&flctl->pdev->dev);
+		writel(flctl->flcmncr_base, FLCMNCR(flctl));
+
+		if (flctl->qos_request) {
+			dev_pm_qos_remove_request(&flctl->pm_qos);
+			flctl->qos_request = 0;
+		}
+
+		pm_runtime_put_sync(&flctl->pdev->dev);
 		break;
 	case 0:
-		flcmncr_val |= CE0_ENABLE;
-		writel(flcmncr_val, FLCMNCR(flctl));
+		flctl->flcmncr_base |= CE0_ENABLE;
+
+		if (!flctl->qos_request) {
+			ret = dev_pm_qos_add_request(&flctl->pdev->dev,
+							&flctl->pm_qos, 100);
+			if (ret < 0)
+				dev_err(&flctl->pdev->dev,
+					"PM QoS request failed: %d\n", ret);
+			flctl->qos_request = 1;
+		}
+
+		if (flctl->holden) {
+			pm_runtime_get_sync(&flctl->pdev->dev);
+			writel(HOLDEN, FLHOLDCR(flctl));
+			pm_runtime_put_sync(&flctl->pdev->dev);
+		}
 		break;
 	default:
 		BUG();
@@ -730,11 +779,6 @@ static int flctl_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 	return 0;
 }
 
-static void flctl_register_init(struct sh_flctl *flctl, unsigned long val)
-{
-	writel(val, FLCMNCR(flctl));
-}
-
 static int flctl_chip_init_tail(struct mtd_info *mtd)
 {
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
@@ -781,13 +825,13 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
 
 		chip->ecc.size = 512;
 		chip->ecc.bytes = 10;
+		chip->ecc.strength = 4;
 		chip->ecc.read_page = flctl_read_page_hwecc;
 		chip->ecc.write_page = flctl_write_page_hwecc;
 		chip->ecc.mode = NAND_ECC_HW;
 
 		/* 4 symbols ECC enabled */
-		writel(readl(FLCMNCR(flctl)) | _4ECCEN | ECCPOS2 | ECCPOS_02,
-				FLCMNCR(flctl));
+		flctl->flcmncr_base |= _4ECCEN | ECCPOS2 | ECCPOS_02;
 	} else {
 		chip->ecc.mode = NAND_ECC_SOFT;
 	}
@@ -819,13 +863,13 @@ static int __devinit flctl_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "failed to get I/O memory\n");
-		goto err;
+		goto err_iomap;
 	}
 
 	flctl->reg = ioremap(res->start, resource_size(res));
 	if (flctl->reg == NULL) {
 		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		goto err;
+		goto err_iomap;
 	}
 
 	platform_set_drvdata(pdev, flctl);
@@ -833,9 +877,9 @@ static int __devinit flctl_probe(struct platform_device *pdev)
 	nand = &flctl->chip;
 	flctl_mtd->priv = nand;
 	flctl->pdev = pdev;
+	flctl->flcmncr_base = pdata->flcmncr_val;
 	flctl->hwecc = pdata->has_hwecc;
-
-	flctl_register_init(flctl, pdata->flcmncr_val);
+	flctl->holden = pdata->use_holden;
 
 	nand->options = NAND_NO_AUTOINCR;
 
@@ -855,23 +899,28 @@ static int __devinit flctl_probe(struct platform_device *pdev)
 		nand->read_word = flctl_read_word;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_resume(&pdev->dev);
+
 	ret = nand_scan_ident(flctl_mtd, 1, NULL);
 	if (ret)
-		goto err;
+		goto err_chip;
 
 	ret = flctl_chip_init_tail(flctl_mtd);
 	if (ret)
-		goto err;
+		goto err_chip;
 
 	ret = nand_scan_tail(flctl_mtd);
 	if (ret)
-		goto err;
+		goto err_chip;
 
 	mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts);
 
 	return 0;
 
-err:
+err_chip:
+	pm_runtime_disable(&pdev->dev);
+err_iomap:
 	kfree(flctl);
 	return ret;
 }
@@ -881,6 +930,7 @@ static int __devexit flctl_remove(struct platform_device *pdev)
 	struct sh_flctl *flctl = platform_get_drvdata(pdev);
 
 	nand_release(&flctl->mtd);
+	pm_runtime_disable(&pdev->dev);
 	kfree(flctl);
 
 	return 0;