Merge branch 'master'

CREDITS

@@ -3643,11 +3643,9 @@ S: Cambridge. CB1 7EG
 S: England
 
 N: Chris Wright
-E: chrisw@osdl.org
+E: chrisw@sous-sol.org
 D: hacking on LSM framework and security modules.
-S: c/o OSDL
-S: 12725 SW Millikan Way, Suite 400
-S: Beaverton, OR 97005
+S: Portland, OR
 S: USA
 
 N: Michal Wronski

Documentation/cpusets.txt

@@ -4,8 +4,9 @@
 Copyright (C) 2004 BULL SA.
 Written by Simon.Derr@bull.net
 
-Portions Copyright (c) 2004 Silicon Graphics, Inc.
+Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
 Modified by Paul Jackson <pj@sgi.com>
+Modified by Christoph Lameter <clameter@sgi.com>
 
 CONTENTS:
 =========
@@ -90,7 +91,8 @@ This can be especially valuable on:
 
 These subsets, or "soft partitions" must be able to be dynamically
 adjusted, as the job mix changes, without impacting other concurrently
-executing jobs.
+executing jobs. The location of the running jobs pages may also be moved
+when the memory locations are changed.
 
 The kernel cpuset patch provides the minimum essential kernel
 mechanisms required to efficiently implement such subsets.  It
@@ -102,8 +104,8 @@ memory allocator code.
 1.3 How are cpusets implemented ?
 ---------------------------------
 
-Cpusets provide a Linux kernel (2.6.7 and above) mechanism to constrain
-which CPUs and Memory Nodes are used by a process or set of processes.
+Cpusets provide a Linux kernel mechanism to constrain which CPUs and
+Memory Nodes are used by a process or set of processes.
 
 The Linux kernel already has a pair of mechanisms to specify on which
 CPUs a task may be scheduled (sched_setaffinity) and on which Memory
@@ -371,22 +373,17 @@ cpusets memory placement policy 'mems' subsequently changes.
 If the cpuset flag file 'memory_migrate' is set true, then when
 tasks are attached to that cpuset, any pages that task had
 allocated to it on nodes in its previous cpuset are migrated
-to the tasks new cpuset.  Depending on the implementation,
-this migration may either be done by swapping the page out,
-so that the next time the page is referenced, it will be paged
-into the tasks new cpuset, usually on the node where it was
-referenced, or this migration may be done by directly copying
-the pages from the tasks previous cpuset to the new cpuset,
-where possible to the same node, relative to the new cpuset,
-as the node that held the page, relative to the old cpuset.
+to the tasks new cpuset. The relative placement of the page within
+the cpuset is preserved during these migration operations if possible.
+For example if the page was on the second valid node of the prior cpuset
+then the page will be placed on the second valid node of the new cpuset.
+
 Also if 'memory_migrate' is set true, then if that cpusets
 'mems' file is modified, pages allocated to tasks in that
 cpuset, that were on nodes in the previous setting of 'mems',
-will be moved to nodes in the new setting of 'mems.'  Again,
-depending on the implementation, this might be done by swapping,
-or by direct copying.  In either case, pages that were not in
-the tasks prior cpuset, or in the cpusets prior 'mems' setting,
-will not be moved.
+will be moved to nodes in the new setting of 'mems.'
+Pages that were not in the tasks prior cpuset, or in the cpusets
+prior 'mems' setting, will not be moved.
 
 There is an exception to the above.  If hotplug functionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
@@ -434,16 +431,6 @@ and then start a subshell 'sh' in that cpuset:
   # The next line should display '/Charlie'
   cat /proc/self/cpuset
 
-In the case that a change of cpuset includes wanting to move already
-allocated memory pages, consider further the work of IWAMOTO
-Toshihiro <iwamoto@valinux.co.jp> for page remapping and memory
-hotremoval, which can be found at:
-
-  http://people.valinux.co.jp/~iwamoto/mh.html
-
-The integration of cpusets with such memory migration is not yet
-available.
-
 In the future, a C library interface to cpusets will likely be
 available.  For now, the only way to query or modify cpusets is
 via the cpuset file system, using the various cd, mkdir, echo, cat,

Documentation/dvb/bt8xx.txt

@@ -111,4 +111,8 @@ source:  linux/Documentation/video4linux/CARDLIST.bttv
 If you have problems with this please do ask on the mailing list.
 
 --
-Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
+Authors: Richard Walker,
+	 Jamie Honan,
+	 Michael Hunold,
+	 Manu Abraham,
+	 Michael Krufky

Documentation/feature-removal-schedule.txt

@@ -180,3 +180,12 @@ Why:	These events are not correct, and do not properly let userspace know
 	when a file system has been mounted or unmounted.  Userspace should
 	poll the /proc/mounts file instead to detect this properly.
 Who:	Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------
+
+What:	Support for NEC DDB5074 and DDB5476 evaluation boards.
+When:	June 2006
+Why:	Board specific code doesn't build anymore since ~2.6.0 and no
+	users have complained indicating there is no more need for these
+	boards.  This should really be considered a last call.
+Who:	Ralf Baechle <ralf@linux-mips.org>

Documentation/kernel-parameters.txt

@@ -335,6 +335,12 @@ running once the system is up.
 			timesource is not avalible, it defaults to PIT.
 			Format: { pit | tsc | cyclone | pmtmr }
 
+	disable_8254_timer
+	enable_8254_timer
+			[IA32/X86_64] Disable/Enable interrupt 0 timer routing
+			over the 8254 in addition to over the IO-APIC. The
+			kernel tries to set a sensible default.
+
 	hpet=		[IA-32,HPET] option to disable HPET and use PIT.
 			Format: disable
 
@@ -1034,6 +1040,8 @@ running once the system is up.
 
 	nomce		[IA-32] Machine Check Exception
 
+	nomca		[IA-64] Disable machine check abort handling
+
 	noresidual	[PPC] Don't use residual data on PReP machines.
 
 	noresume	[SWSUSP] Disables resume and restores original swap
@@ -1282,6 +1290,19 @@ running once the system is up.
 			New name for the ramdisk parameter.
 			See Documentation/ramdisk.txt.
 
+	rcu.blimit=	[KNL,BOOT] Set maximum number of finished
+			RCU callbacks to process in one batch.
+
+	rcu.qhimark=	[KNL,BOOT] Set threshold of queued
+			RCU callbacks over which batch limiting is disabled.
+
+	rcu.qlowmark=	[KNL,BOOT] Set threshold of queued
+			RCU callbacks below which batch limiting is re-enabled.
+
+	rcu.rsinterval=	[KNL,BOOT,SMP] Set the number of additional
+			RCU callbacks to queued before forcing reschedule
+			on all cpus.
+
 	rdinit=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /init from the ramdisk,

Documentation/video4linux/CARDLIST.saa7134

@@ -13,7 +13,7 @@
  12 -> Medion 7134                              [16be:0003]
  13 -> Typhoon TV+Radio 90031
  14 -> ELSA EX-VISION 300TV                     [1048:226b]
- 15 -> ELSA EX-VISION 500TV                     [1048:226b]
+ 15 -> ELSA EX-VISION 500TV                     [1048:226a]
  16 -> ASUS TV-FM 7134                          [1043:4842,1043:4830,1043:4840]
  17 -> AOPEN VA1000 POWER                       [1131:7133]
  18 -> BMK MPEX No Tuner
@@ -75,7 +75,7 @@
  74 -> LifeView FlyTV Platinum Mini2            [14c0:1212]
  75 -> AVerMedia AVerTVHD MCE A180              [1461:1044]
  76 -> SKNet MonsterTV Mobile                   [1131:4ee9]
- 77 -> Pinnacle PCTV 110i (saa7133)             [11bd:002e]
+ 77 -> Pinnacle PCTV 40i/50i/110i (saa7133)     [11bd:002e]
  78 -> ASUSTeK P7131 Dual                       [1043:4862]
  79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
  80 -> ASUS Digimatrix TV                       [1043:0210]

Documentation/vm/page_migration

@@ -12,12 +12,18 @@ is running.
 
 Page migration allows a process to manually relocate the node on which its
 pages are located through the MF_MOVE and MF_MOVE_ALL options while setting
-a new memory policy. The pages of process can also be relocated
+a new memory policy via mbind(). The pages of process can also be relocated
 from another process using the sys_migrate_pages() function call. The
 migrate_pages function call takes two sets of nodes and moves pages of a
 process that are located on the from nodes to the destination nodes.
-
-Manual migration is very useful if for example the scheduler has relocated
+Page migration functions are provided by the numactl package by Andi Kleen
+(a version later than 0.9.3 is required. Get it from
+ftp://ftp.suse.com/pub/people/ak). numactl provided libnuma which
+provides an interface similar to other numa functionality for page migration.
+cat /proc/<pid>/numa_maps allows an easy review of where the pages of
+a process are located. See also the numa_maps manpage in the numactl package.
+
+Manual migration is useful if for example the scheduler has relocated
 a process to a processor on a distant node. A batch scheduler or an
 administrator may detect the situation and move the pages of the process
 nearer to the new processor. At some point in the future we may have
@@ -25,10 +31,12 @@ some mechanism in the scheduler that will automatically move the pages.
 
 Larger installations usually partition the system using cpusets into
 sections of nodes. Paul Jackson has equipped cpusets with the ability to
-move pages when a task is moved to another cpuset. This allows automatic
-control over locality of a process. If a task is moved to a new cpuset
-then also all its pages are moved with it so that the performance of the
-process does not sink dramatically (as is the case today).
+move pages when a task is moved to another cpuset (See ../cpusets.txt).
+Cpusets allows the automation of process locality. If a task is moved to
+a new cpuset then also all its pages are moved with it so that the
+performance of the process does not sink dramatically. Also the pages
+of processes in a cpuset are moved if the allowed memory nodes of a
+cpuset are changed.
 
 Page migration allows the preservation of the relative location of pages
 within a group of nodes for all migration techniques which will preserve a
@@ -37,22 +45,26 @@ process. This is necessary in order to preserve the memory latencies.
 Processes will run with similar performance after migration.
 
 Page migration occurs in several steps. First a high level
-description for those trying to use migrate_pages() and then
-a low level description of how the low level details work.
+description for those trying to use migrate_pages() from the kernel
+(for userspace usage see the Andi Kleen's numactl package mentioned above)
+and then a low level description of how the low level details work.
 
-A. Use of migrate_pages()
--------------------------
+A. In kernel use of migrate_pages()
+-----------------------------------
 
 1. Remove pages from the LRU.
 
    Lists of pages to be migrated are generated by scanning over
    pages and moving them into lists. This is done by
-   calling isolate_lru_page() or __isolate_lru_page().
+   calling isolate_lru_page().
    Calling isolate_lru_page increases the references to the page
-   so that it cannot vanish under us.
+   so that it cannot vanish while the page migration occurs.
+   It also prevents the swapper or other scans to encounter
+   the page.
 
-2. Generate a list of newly allocates page to move the contents
-   of the first list to.
+2. Generate a list of newly allocates page. These pages will contain the
+   contents of the pages from the first list after page migration is
+   complete.
 
 3. The migrate_pages() function is called which attempts
    to do the migration. It returns the moved pages in the
@@ -63,13 +75,17 @@ A. Use of migrate_pages()
 4. The leftover pages of various types are returned
    to the LRU using putback_to_lru_pages() or otherwise
    disposed of. The pages will still have the refcount as
-   increased by isolate_lru_pages()!
+   increased by isolate_lru_pages() if putback_to_lru_pages() is not
+   used! The kernel may want to handle the various cases of failures in
+   different ways.
 
-B. Operation of migrate_pages()
---------------------------------
+B. How migrate_pages() works
+----------------------------
 
-migrate_pages does several passes over its list of pages. A page is moved
-if all references to a page are removable at the time.
+migrate_pages() does several passes over its list of pages. A page is moved
+if all references to a page are removable at the time. The page has
+already been removed from the LRU via isolate_lru_page() and the refcount
+is increased so that the page cannot be freed while page migration occurs.
 
 Steps:
 
@@ -79,36 +95,40 @@ Steps:
 
 3. Make sure that the page has assigned swap cache entry if
    it is an anonyous page. The swap cache reference is necessary
-   to preserve the information contain in the page table maps.
+   to preserve the information contain in the page table maps while
+   page migration occurs.
 
 4. Prep the new page that we want to move to. It is locked
    and set to not being uptodate so that all accesses to the new
-   page immediately lock while we are moving references.
+   page immediately lock while the move is in progress.
 
-5. All the page table references to the page are either dropped (file backed)
-   or converted to swap references (anonymous pages). This should decrease the
-   reference count.
+5. All the page table references to the page are either dropped (file
+   backed pages) or converted to swap references (anonymous pages).
+   This should decrease the reference count.
 
-6. The radix tree lock is taken
+6. The radix tree lock is taken. This will cause all processes trying
+   to reestablish a pte to block on the radix tree spinlock.
 
 7. The refcount of the page is examined and we back out if references remain
    otherwise we know that we are the only one referencing this page.
 
 8. The radix tree is checked and if it does not contain the pointer to this
-   page then we back out.
+   page then we back out because someone else modified the mapping first.
 
 9. The mapping is checked. If the mapping is gone then a truncate action may
    be in progress and we back out.
 
-10. The new page is prepped with some settings from the old page so that accesses
-   to the new page will be discovered to have the correct settings.
+10. The new page is prepped with some settings from the old page so that
+   accesses to the new page will be discovered to have the correct settings.
 
 11. The radix tree is changed to point to the new page.
 
-12. The reference count of the old page is dropped because the reference has now
-    been removed.
+12. The reference count of the old page is dropped because the radix tree
+    reference is gone.
 
-13. The radix tree lock is dropped.
+13. The radix tree lock is dropped. With that lookups become possible again
+    and other processes will move from spinning on the tree lock to sleeping on
+    the locked new page.
 
 14. The page contents are copied to the new page.
 
@@ -119,11 +139,37 @@ Steps:
 
 17. Queued up writeback on the new page is triggered.
 
-18. If swap pte's were generated for the page then remove them again.
+18. If swap pte's were generated for the page then replace them with real
+    ptes. This will reenable access for processes not blocked by the page lock.
+
+19. The page locks are dropped from the old and new page.
+    Processes waiting on the page lock can continue.
+
+20. The new page is moved to the LRU and can be scanned by the swapper
+    etc again.
+
+TODO list
+---------
+
+- Page migration requires the use of swap handles to preserve the
+  information of the anonymous page table entries. This means that swap
+  space is reserved but never used. The maximum number of swap handles used
+  is determined by CHUNK_SIZE (see mm/mempolicy.c) per ongoing migration.
+  Reservation of pages could be avoided by having a special type of swap
+  handle that does not require swap space and that would only track the page
+  references. Something like that was proposed by Marcelo Tosatti in the
+  past (search for migration cache on lkml or linux-mm@kvack.org).
 
-19. The locks are dropped from the old and new page.
+- Page migration unmaps ptes for file backed pages and requires page
+  faults to reestablish these ptes. This could be optimized by somehow
+  recording the references before migration and then reestablish them later.
+  However, there are several locking challenges that have to be overcome
+  before this is possible.
 
-20. The new page is moved to the LRU.
+- Page migration generates read ptes for anonymous pages. Dirty page
+  faults are required to make the pages writable again. It may be possible
+  to generate a pte marked dirty if it is known that the page is dirty and
+  that this process has the only reference to that page.
 
-Christoph Lameter, December 19, 2005.
+Christoph Lameter, March 8, 2006.
 

MAINTAINERS

@@ -838,7 +838,6 @@ S:	Maintained
 
 DVB SUBSYSTEM AND DRIVERS
 P:	LinuxTV.org Project
-M:	mchehab@infradead.org
 M:	v4l-dvb-maintainer@linuxtv.org
 L: 	linux-dvb@linuxtv.org (subscription required)
 W:	http://linuxtv.org/
@@ -1632,8 +1631,8 @@ S:	Supported
 
 LINUX SECURITY MODULE (LSM) FRAMEWORK
 P:	Chris Wright
-M:	chrisw@osdl.org
-L:	linux-security-module@wirex.com
+M:	chrisw@sous-sol.org
+L:	linux-security-module@vger.kernel.org
 W:	http://lsm.immunix.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
 S:	Supported

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 16
-EXTRAVERSION =-rc5
+EXTRAVERSION =-rc6
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*
@@ -905,7 +905,7 @@ define filechk_version.h
 	)
 endef
 
-include/linux/version.h: $(srctree)/Makefile .config FORCE
+include/linux/version.h: $(srctree)/Makefile .config .kernelrelease FORCE
 	$(call filechk,version.h)
 
 # ---------------------------------------------------------------------------

arch/alpha/kernel/irq.c

@@ -151,8 +151,13 @@ handle_irq(int irq, struct pt_regs * regs)
 	}
 
 	irq_enter();
+	/*
+	 * __do_IRQ() must be called with IPL_MAX. Note that we do not
+	 * explicitly enable interrupts afterwards - some MILO PALcode
+	 * (namely LX164 one) seems to have severe problems with RTI
+	 * at IPL 0.
+	 */
 	local_irq_disable();
 	__do_IRQ(irq, regs);
-	local_irq_enable();
 	irq_exit();
 }

arch/arm/Kconfig

@@ -78,7 +78,7 @@ menu "System Type"
 
 choice
 	prompt "ARM system type"
-	default ARCH_RPC
+	default ARCH_VERSATILE
 
 config ARCH_CLPS7500
 	bool "Cirrus-CL-PS7500FE"
@@ -799,6 +799,8 @@ source "drivers/i2c/Kconfig"
 
 source "drivers/spi/Kconfig"
 
+source "drivers/w1/Kconfig"
+
 source "drivers/hwmon/Kconfig"
 
 #source "drivers/l3/Kconfig"

arch/arm/common/locomo.c

@@ -629,6 +629,22 @@ static int locomo_resume(struct platform_device *dev)
 }
 #endif
 
+
+#define LCM_ALC_EN	0x8000
+
+void frontlight_set(struct locomo *lchip, int duty, int vr, int bpwf)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&lchip->lock, flags);
+	locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+	udelay(100);
+	locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+	locomo_writel(bpwf | LCM_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+	spin_unlock_irqrestore(&lchip->lock, flags);
+}
+
+
 /**
  *	locomo_probe - probe for a single LoCoMo chip.
  *	@phys_addr: physical address of device.
@@ -688,6 +704,11 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 	/* FrontLight */
 	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
 	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+
+	/* Same constants can be used for collie and poodle
+	   (depending on CONFIG options in original sharp code)? */
+	frontlight_set(lchip, 163, 0, 148);
+
 	/* Longtime timer */
 	locomo_writel(0, lchip->base + LOCOMO_LTINT);
 	/* SPI */

arch/arm/kernel/asm-offsets.c

@@ -57,7 +57,9 @@ int main(void)
   DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
   DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
   DEFINE(TI_VFPSTATE,		offsetof(struct thread_info, vfpstate));
-  DEFINE(TI_IWMMXT_STATE,	(offsetof(struct thread_info, fpstate)+4)&~7);
+#ifdef CONFIG_IWMMXT
+  DEFINE(TI_IWMMXT_STATE,	offsetof(struct thread_info, fpstate.iwmmxt));
+#endif
   BLANK();
   DEFINE(S_R0,			offsetof(struct pt_regs, ARM_r0));
   DEFINE(S_R1,			offsetof(struct pt_regs, ARM_r1));

arch/arm/kernel/compat.c

@@ -27,6 +27,8 @@
 
 #include <asm/mach/arch.h>
 
+#include "compat.h"
+
 /*
  * Usage:
  *  - do not go blindly adding fields, add them at the end

arch/arm/kernel/compat.h

@@ -0,0 +1,13 @@
+/*
+ *  linux/arch/arm/kernel/compat.h
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void convert_to_tag_list(struct tag *tags);
+
+extern void squash_mem_tags(struct tag *tag);

arch/arm/kernel/process.c

@@ -27,6 +27,7 @@
 #include <linux/kallsyms.h>
 #include <linux/init.h>
 #include <linux/cpu.h>
+#include <linux/elfcore.h>
 
 #include <asm/leds.h>
 #include <asm/processor.h>
@@ -83,7 +84,7 @@ EXPORT_SYMBOL(pm_power_off);
  * This is our default idle handler.  We need to disable
  * interrupts here to ensure we don't miss a wakeup call.
  */
-void default_idle(void)
+static void default_idle(void)
 {
 	if (hlt_counter)
 		cpu_relax();

arch/arm/kernel/ptrace.c

@@ -610,15 +610,12 @@ static int ptrace_setfpregs(struct task_struct *tsk, void __user *ufp)
 static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp)
 {
 	struct thread_info *thread = task_thread_info(tsk);
-	void *ptr = &thread->fpstate;
 
 	if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
 		return -ENODATA;
 	iwmmxt_task_disable(thread);  /* force it to ram */
-	/* The iWMMXt state is stored doubleword-aligned.  */
-	if (((long) ptr) & 4)
-		ptr += 4;
-	return copy_to_user(ufp, ptr, 0x98) ? -EFAULT : 0;
+	return copy_to_user(ufp, &thread->fpstate.iwmmxt, IWMMXT_SIZE)
+		? -EFAULT : 0;
 }
 
 /*
@@ -627,15 +624,12 @@ static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp)
 static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp)
 {
 	struct thread_info *thread = task_thread_info(tsk);
-	void *ptr = &thread->fpstate;
 
 	if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
 		return -EACCES;
 	iwmmxt_task_release(thread);  /* force a reload */
-	/* The iWMMXt state is stored doubleword-aligned.  */
-	if (((long) ptr) & 4)
-		ptr += 4;
-	return copy_from_user(ptr, ufp, 0x98) ? -EFAULT : 0;
+	return copy_from_user(&thread->fpstate.iwmmxt, ufp, IWMMXT_SIZE)
+		? -EFAULT : 0;
 }
 
 #endif

arch/arm/kernel/setup.c

@@ -37,6 +37,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "compat.h"
+
 #ifndef MEM_SIZE
 #define MEM_SIZE	(16*1024*1024)
 #endif
@@ -53,10 +55,7 @@ static int __init fpe_setup(char *line)
 __setup("fpe=", fpe_setup);
 #endif
 
-extern unsigned int mem_fclk_21285;
 extern void paging_init(struct meminfo *, struct machine_desc *desc);
-extern void convert_to_tag_list(struct tag *tags);
-extern void squash_mem_tags(struct tag *tag);
 extern void reboot_setup(char *str);
 extern int root_mountflags;
 extern void _stext, _text, _etext, __data_start, _edata, _end;

arch/arm/kernel/time.c

@@ -422,12 +422,14 @@ static int timer_dyn_tick_disable(void)
 void timer_dyn_reprogram(void)
 {
 	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
+	unsigned long next, seq;
 
-	if (dyn_tick) {
-		write_seqlock(&xtime_lock);
-		if (dyn_tick->state & DYN_TICK_ENABLED)
+	if (dyn_tick && (dyn_tick->state & DYN_TICK_ENABLED)) {
+		next = next_timer_interrupt();
+		do {
+			seq = read_seqbegin(&xtime_lock);
 			dyn_tick->reprogram(next_timer_interrupt() - jiffies);
-		write_sequnlock(&xtime_lock);
+		} while (read_seqretry(&xtime_lock, seq));
 	}
 }
 

arch/arm/lib/muldi3.S

@@ -29,8 +29,8 @@ ENTRY(__aeabi_lmul)
 
 	mul	xh, yl, xh
 	mla	xh, xl, yh, xh
-	mov	ip, xl, asr #16
-	mov	yh, yl, asr #16
+	mov	ip, xl, lsr #16
+	mov	yh, yl, lsr #16
 	bic	xl, xl, ip, lsl #16
 	bic	yl, yl, yh, lsl #16
 	mla	xh, yh, ip, xh

arch/arm/mach-ixp4xx/Kconfig

@@ -8,11 +8,9 @@ menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
 
-# This entry is placed on top because otherwise it would have
-# been shown as a submenu.
 config MACH_NSLU2
 	bool
-	prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
+	prompt "Linksys NSLU2"
 	help
 	  Say 'Y' here if you want your kernel to support Linksys's
 	  NSLU2 NAS device. For more information on this platform,

arch/arm/mach-ixp4xx/nas100d-power.c

@@ -56,6 +56,9 @@ static int __init nas100d_power_init(void)
 
 static void __exit nas100d_power_exit(void)
 {
+	if (!(machine_is_nas100d()))
+		return;
+
 	free_irq(NAS100D_RB_IRQ, NULL);
 }
 

arch/arm/mach-ixp4xx/nas100d-setup.c

@@ -113,6 +113,9 @@ static void __init nas100d_init(void)
 {
 	ixp4xx_sys_init();
 
+	/* gpio 14 and 15 are _not_ clocks */
+	*IXP4XX_GPIO_GPCLKR = 0;
+
 	nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	nas100d_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;

arch/arm/mach-s3c2410/devs.c

@@ -334,11 +334,17 @@ static struct resource s3c_spi0_resource[] = {
 
 };
 
+static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
+
 struct platform_device s3c_device_spi0 = {
 	.name		  = "s3c2410-spi",
 	.id		  = 0,
 	.num_resources	  = ARRAY_SIZE(s3c_spi0_resource),
 	.resource	  = s3c_spi0_resource,
+        .dev              = {
+                .dma_mask = &s3c_device_spi0_dmamask,
+                .coherent_dma_mask = 0xffffffffUL
+        }
 };
 
 EXPORT_SYMBOL(s3c_device_spi0);
@@ -359,11 +365,17 @@ static struct resource s3c_spi1_resource[] = {
 
 };
 
+static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
+
 struct platform_device s3c_device_spi1 = {
 	.name		  = "s3c2410-spi",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s3c_spi1_resource),
 	.resource	  = s3c_spi1_resource,
+        .dev              = {
+                .dma_mask = &s3c_device_spi1_dmamask,
+                .coherent_dma_mask = 0xffffffffUL
+        }
 };
 
 EXPORT_SYMBOL(s3c_device_spi1);

arch/arm/mm/cache-v6.S

@@ -96,15 +96,16 @@ ENTRY(v6_coherent_user_range)
 #ifdef HARVARD_CACHE
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I line
 	add	r0, r0, #CACHE_LINE_SIZE
 	cmp	r0, r1
 	blo	1b
 #endif
-	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
-#ifdef HARVARD_CACHE
 	mov	r0, #0
+#ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
+#else
+	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
 #endif
 	mov	pc, lr
 

arch/arm/mm/flush.c

@@ -24,14 +24,16 @@
 static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 {
 	unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+	const int zero = 0;
 
 	set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
 	flush_tlb_kernel_page(to);
 
 	asm(	"mcrr	p15, 0, %1, %0, c14\n"
-	"	mcrr	p15, 0, %1, %0, c5\n"
+	"	mcr	p15, 0, %2, c7, c10, 4\n"
+	"	mcr	p15, 0, %2, c7, c5, 0\n"
 	    :
-	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
+	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
 	    : "cc");
 }
 

arch/arm/mm/tlb-v6.S

@@ -80,6 +80,7 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
+	mcr	p15, 0, r2, c7, c10, 4		@ data synchronization barrier
 	mov	pc, lr
 
 	.section ".text.init", #alloc, #execinstr

arch/h8300/kernel/process.c

@@ -45,6 +45,9 @@
 #include <asm/setup.h>
 #include <asm/pgtable.h>
 
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
 asmlinkage void ret_from_fork(void);
 
 /*

arch/i386/kernel/Makefile

@@ -11,7 +11,7 @@ obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 
 obj-y				+= cpu/
 obj-y				+= timers/
-obj-$(CONFIG_ACPI)		+= acpi/
+obj-y				+= acpi/
 obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot.o
 obj-$(CONFIG_MCA)		+= mca.o
 obj-$(CONFIG_X86_MSR)		+= msr.o

arch/i386/kernel/acpi/Makefile

@@ -1,4 +1,4 @@
-obj-y				:= boot.o
+obj-$(CONFIG_ACPI)		+= boot.o
 obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
 

arch/i386/kernel/acpi/boot.c

@@ -1111,9 +1111,6 @@ int __init acpi_boot_table_init(void)
 		disable_acpi();
 		return error;
 	}
-#ifdef __i386__
-	check_acpi_pci();
-#endif
 
 	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
 

arch/i386/kernel/acpi/earlyquirk.c

@@ -7,14 +7,22 @@
 #include <linux/pci.h>
 #include <asm/pci-direct.h>
 #include <asm/acpi.h>
+#include <asm/apic.h>
 
 static int __init check_bridge(int vendor, int device)
 {
+#ifdef CONFIG_ACPI
 	/* According to Nvidia all timer overrides are bogus. Just ignore
 	   them all. */
 	if (vendor == PCI_VENDOR_ID_NVIDIA) {
 		acpi_skip_timer_override = 1;
 	}
+#endif
+	if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) {
+		timer_over_8254 = 0;
+		printk(KERN_INFO "ATI board detected. Disabling timer routing "
+				"over 8254.\n");
+	}
 	return 0;
 }
 

arch/i386/kernel/apic.c

@@ -570,16 +570,18 @@ void __devinit setup_local_APIC(void)
  */
 void lapic_shutdown(void)
 {
+	unsigned long flags;
+
 	if (!cpu_has_apic)
 		return;
 
-	local_irq_disable();
+	local_irq_save(flags);
 	clear_local_APIC();
 
 	if (enabled_via_apicbase)
 		disable_local_APIC();
 
-	local_irq_enable();
+	local_irq_restore(flags);
 }
 
 #ifdef CONFIG_PM

arch/i386/kernel/cpu/common.c

@@ -278,10 +278,10 @@ void __devinit generic_identify(struct cpuinfo_x86 * c)
 			c->x86_capability[4] = excap;
 			c->x86 = (tfms >> 8) & 15;
 			c->x86_model = (tfms >> 4) & 15;
-			if (c->x86 == 0xf) {
+			if (c->x86 == 0xf)
 				c->x86 += (tfms >> 20) & 0xff;
+			if (c->x86 >= 0x6)
 				c->x86_model += ((tfms >> 16) & 0xF) << 4;
-			} 
 			c->x86_mask = tfms & 15;
 		} else {
 			/* Have CPUID level 0 only - unheard of */

arch/i386/kernel/efi.c

@@ -70,10 +70,13 @@ static void efi_call_phys_prelog(void)
 {
 	unsigned long cr4;
 	unsigned long temp;
+	struct Xgt_desc_struct *cpu_gdt_descr;
 
 	spin_lock(&efi_rt_lock);
 	local_irq_save(efi_rt_eflags);
 
+	cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
+
 	/*
 	 * If I don't have PSE, I should just duplicate two entries in page
 	 * directory. If I have PSE, I just need to duplicate one entry in
@@ -103,18 +106,17 @@ static void efi_call_phys_prelog(void)
 	 */
 	local_flush_tlb();
 
-	per_cpu(cpu_gdt_descr, 0).address =
-				 __pa(per_cpu(cpu_gdt_descr, 0).address);
-	load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
+	cpu_gdt_descr->address = __pa(cpu_gdt_descr->address);
+	load_gdt(cpu_gdt_descr);
 }
 
 static void efi_call_phys_epilog(void)
 {
 	unsigned long cr4;
+	struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
 
-	per_cpu(cpu_gdt_descr, 0).address =
-			(unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
-	load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
+	cpu_gdt_descr->address = __va(cpu_gdt_descr->address);
+	load_gdt(cpu_gdt_descr);
 
 	cr4 = read_cr4();
 

arch/i386/kernel/io_apic.c

@@ -51,6 +51,8 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
 
+int timer_over_8254 __initdata = 1;
+
 /*
  *	Is the SiS APIC rmw bug present ?
  *	-1 = don't know, 0 = no, 1 = yes
@@ -2267,7 +2269,8 @@ static inline void check_timer(void)
 	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
 	timer_ack = 1;
-	enable_8259A_irq(0);
+	if (timer_over_8254 > 0)
+		enable_8259A_irq(0);
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -2392,6 +2395,20 @@ void __init setup_IO_APIC(void)
 		print_IO_APIC();
 }
 
+static int __init setup_disable_8254_timer(char *s)
+{
+	timer_over_8254 = -1;
+	return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+	timer_over_8254 = 2;
+	return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
 /*
  *	Called after all the initialization is done. If we didnt find any
  *	APIC bugs then we can allow the modify fast path

arch/i386/kernel/machine_kexec.c

@@ -116,13 +116,13 @@ static void load_segments(void)
 	__asm__ __volatile__ (
 		"\tljmp $"STR(__KERNEL_CS)",$1f\n"
 		"\t1:\n"
-		"\tmovl $"STR(__KERNEL_DS)",%eax\n"
-		"\tmovl %eax,%ds\n"
-		"\tmovl %eax,%es\n"
-		"\tmovl %eax,%fs\n"
-		"\tmovl %eax,%gs\n"
-		"\tmovl %eax,%ss\n"
-		);
+		"\tmovl $"STR(__KERNEL_DS)",%%eax\n"
+		"\tmovl %%eax,%%ds\n"
+		"\tmovl %%eax,%%es\n"
+		"\tmovl %%eax,%%fs\n"
+		"\tmovl %%eax,%%gs\n"
+		"\tmovl %%eax,%%ss\n"
+		::: "eax", "memory");
 #undef STR
 #undef __STR
 }

arch/i386/kernel/microcode.c

@@ -74,6 +74,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sched.h>
+#include <linux/cpumask.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
@@ -250,8 +251,8 @@ static int find_matching_ucodes (void)
 			error = -EINVAL;
 			goto out;
 		}
-		
-		for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+
+		for_each_online_cpu(cpu_num) {
 			struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
 			if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
 				continue;
@@ -293,7 +294,7 @@ static int find_matching_ucodes (void)
 					error = -EFAULT;
 					goto out;
 				}
-				for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+				for_each_online_cpu(cpu_num) {
 					struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
 					if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
 						continue;
@@ -304,7 +305,9 @@ static int find_matching_ucodes (void)
 			}
 		}
 		/* now check if any cpu has matched */
-		for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) {
+		allocated_flag = 0;
+		sum = 0;
+		for_each_online_cpu(cpu_num) {
 			if (ucode_cpu_info[cpu_num].err == MC_MARKED) { 
 				struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
 				if (!allocated_flag) {
@@ -415,12 +418,12 @@ static int do_microcode_update (void)
 	}
 
 out_free:
-	for (i = 0; i < num_online_cpus(); i++) {
+	for_each_online_cpu(i) {
 		if (ucode_cpu_info[i].mc) {
 			int j;
 			void *tmp = ucode_cpu_info[i].mc;
 			vfree(tmp);
-			for (j = i; j < num_online_cpus(); j++) {
+			for_each_online_cpu(j) {
 				if (ucode_cpu_info[j].mc == tmp)
 					ucode_cpu_info[j].mc = NULL;
 			}

arch/i386/kernel/nmi.c

@@ -357,7 +357,7 @@ static void clear_msr_range(unsigned int base, unsigned int n)
 		wrmsr(base+i, 0, 0);
 }
 
-static inline void write_watchdog_counter(const char *descr)
+static void write_watchdog_counter(const char *descr)
 {
 	u64 count = (u64)cpu_khz * 1000;
 
@@ -544,7 +544,7 @@ void nmi_watchdog_tick (struct pt_regs * regs)
 			 * die_nmi will return ONLY if NOTIFY_STOP happens..
 			 */
 			die_nmi(regs, "NMI Watchdog detected LOCKUP");
-
+	} else {
 		last_irq_sums[cpu] = sum;
 		alert_counter[cpu] = 0;
 	}

arch/i386/kernel/setup.c

@@ -1599,6 +1599,10 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled)
 		efi_map_memmap();
 
+#ifdef CONFIG_X86_IO_APIC
+	check_acpi_pci();	/* Checks more than just ACPI actually */
+#endif
+
 #ifdef CONFIG_ACPI
 	/*
 	 * Parse the ACPI tables for possible boot-time SMP configuration.

arch/i386/kernel/time.c

@@ -412,9 +412,9 @@ static int timer_resume(struct sys_device *dev)
 	write_seqlock_irqsave(&xtime_lock, flags);
 	xtime.tv_sec = sec;
 	xtime.tv_nsec = 0;
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-	jiffies += sleep_length;
+	jiffies_64 += sleep_length;
 	wall_jiffies += sleep_length;
+	write_sequnlock_irqrestore(&xtime_lock, flags);
 	if (last_timer->resume)
 		last_timer->resume();
 	cur_timer = last_timer;

arch/ia64/configs/bigsur_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:18:49 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:10:42 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -57,18 +59,37 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
@@ -81,18 +102,17 @@ CONFIG_ITANIUM=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_BRL_EMU=y
 CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_NUMA is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 # CONFIG_HOTPLUG_CPU is not set
@@ -105,7 +125,12 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 # CONFIG_IA64_MCA_RECOVERY is not set
@@ -117,7 +142,6 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -125,6 +149,7 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -137,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -173,6 +199,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -206,6 +233,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -218,14 +250,16 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -286,20 +320,13 @@ CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=m
 
 #
@@ -390,6 +417,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -399,6 +427,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -409,14 +438,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -448,6 +470,7 @@ CONFIG_DM_ZERO=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -486,6 +509,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -524,6 +548,7 @@ CONFIG_EEPRO100=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -630,6 +655,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -681,6 +707,7 @@ CONFIG_DRM_R128=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -731,11 +758,18 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -754,6 +788,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -775,6 +810,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
@@ -830,6 +866,8 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 # CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -837,17 +875,18 @@ CONFIG_SND_PCM_OSS=m
 # Generic devices
 #
 CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -856,38 +895,38 @@ CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 CONFIG_SND_CS4281=m
+# CONFIG_SND_CS46XX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -929,12 +968,15 @@ CONFIG_USB_UHCI_HCD=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_BLUETOOTH_TTY=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -946,13 +988,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 
@@ -972,6 +1016,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1046,7 +1091,7 @@ CONFIG_USB_MON=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -1071,6 +1116,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1111,6 +1157,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1153,6 +1200,7 @@ CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_EXPERIMENTAL is not set
@@ -1179,6 +1227,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1237,28 +1286,32 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 
 #
-# Profiling support
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_IA64_GRANULE_16MB is not set
 CONFIG_IA64_GRANULE_64MB=y
 # CONFIG_IA64_PRINT_HAZARDS is not set

arch/ia64/configs/gensparse_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Wed Sep 28 08:27:29 2005
+# Linux kernel version: 2.6.16-rc5
+# Thu Mar  2 16:39:10 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,18 +60,37 @@ CONFIG_MODVERSIONS=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -82,6 +103,8 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
@@ -105,6 +128,9 @@ CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -117,13 +143,13 @@ CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -131,6 +157,7 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -145,6 +172,7 @@ CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -187,6 +215,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -221,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -233,8 +267,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -275,7 +312,13 @@ CONFIG_FW_LOADER=m
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -295,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -327,6 +363,7 @@ CONFIG_BLK_DEV_IDESCSI=m
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -400,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -409,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
@@ -436,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -476,6 +510,7 @@ CONFIG_DM_MULTIPATH=m
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
 
@@ -497,6 +532,7 @@ CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -515,6 +551,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -564,6 +601,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -668,12 +706,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -689,6 +730,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -738,10 +780,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -749,12 +791,19 @@ CONFIG_MMTIMER=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -765,6 +814,7 @@ CONFIG_MMTIMER=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -815,26 +865,28 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
 #
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -843,40 +895,40 @@ CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
 CONFIG_SND_EMU10K1=m
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 CONFIG_SND_FM801=m
 # CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -922,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -939,12 +994,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -964,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1043,6 +1102,7 @@ CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
 
 #
 # SN Devices
@@ -1050,6 +1110,10 @@ CONFIG_INFINIBAND_IPOIB=m
 CONFIG_SGI_IOC4=y
 CONFIG_SGI_IOC3=y
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -1079,6 +1143,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1120,6 +1185,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1189,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1254,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # CONFIG_HP_SIMSCSI is not set
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set

arch/ia64/configs/sim_defconfig

@@ -1,39 +1,52 @@
 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:13:41 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -43,21 +56,45 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
 CONFIG_IA64_HP_SIM=y
 # CONFIG_ITANIUM is not set
@@ -66,17 +103,36 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 # CONFIG_IA64_PAGE_SIZE_16KB is not set
 CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
 # CONFIG_IA64_CYCLONE is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=64
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
+# CONFIG_IA64_MCA_RECOVERY is not set
 # CONFIG_PERFMON is not set
 CONFIG_IA64_PALINFO=m
 
@@ -84,7 +140,6 @@ CONFIG_IA64_PALINFO=m
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
-# CONFIG_SMBIOS is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 
@@ -92,6 +147,81 @@ CONFIG_BINFMT_MISC=y
 # Power management and ACPI
 #
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
 #
 # Device Drivers
 #
@@ -99,8 +229,16 @@ CONFIG_BINFMT_MISC=y
 #
 # Generic Driver Options
 #
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -118,12 +256,16 @@ CONFIG_BINFMT_MISC=y
 #
 # Block devices
 #
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -133,6 +275,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -144,6 +287,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -157,13 +301,14 @@ CONFIG_SCSI_LOGGING=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
-# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -174,77 +319,47 @@ CONFIG_SCSI_SPI_ATTRS=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
+# CONFIG_NETDEVICES is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# Networking options
+# PHY device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# Ethernet (10 or 100Mbit)
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
+# CONFIG_NET_ETHERNET is not set
 
 #
-# QoS and/or fair queueing
+# Ethernet (1000 Mbit)
 #
-# CONFIG_NET_SCHED is not set
 
 #
-# Network testing
+# Ethernet (10000 Mbit)
 #
-# CONFIG_NET_PKTGEN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
 
 #
 # ISDN subsystem
@@ -273,16 +388,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-
 #
 # Input Device Drivers
 #
@@ -292,6 +397,15 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -310,7 +424,6 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
 
 #
 # IPMI
@@ -324,25 +437,52 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_EFI_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_FTAPE is not set
 # CONFIG_AGP is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
 #
 # Misc devices
 #
 
+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@@ -362,7 +502,6 @@ CONFIG_EFI_RTC=y
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 
 #
@@ -373,29 +512,54 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
 
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -406,7 +570,8 @@ CONFIG_JBD=y
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -415,12 +580,12 @@ CONFIG_JBD=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -448,18 +613,22 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -476,10 +645,10 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SOLARIS_X86_PARTITION is not set
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -490,8 +659,13 @@ CONFIG_EFI_PARTITION=y
 #
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # HP Simulator drivers
@@ -502,33 +676,50 @@ CONFIG_HP_SIMSERIAL_CONSOLE=y
 CONFIG_HP_SIMSCSI=y
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
-# CONFIG_IA64_GRANULE_16MB is not set
-CONFIG_IA64_GRANULE_64MB=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
 # CONFIG_IA64_DEBUG_CMPXCHG is not set
 # CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_DEBUG_INFO=y
 CONFIG_SYSVIPC_COMPAT=y
 
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
 # CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#

arch/ia64/configs/sn2_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec  2 10:33:48 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:06:38 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_CPUSETS=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -88,7 +90,7 @@ CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -126,6 +128,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -140,6 +143,7 @@ CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
@@ -166,6 +170,7 @@ CONFIG_ACPI=y
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -207,6 +212,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -247,6 +253,11 @@ CONFIG_IPV6=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -330,6 +341,7 @@ CONFIG_ATA_OVER_ETH=m
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -457,13 +469,7 @@ CONFIG_SCSI_SATA_VITESSE=y
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-CONFIG_SCSI_QLA22XX=y
-CONFIG_SCSI_QLA2300=y
-CONFIG_SCSI_QLA2322=y
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -545,6 +551,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -632,12 +639,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -686,8 +696,8 @@ CONFIG_AGP=y
 CONFIG_AGP_SGI_TIOCA=y
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=m
-# CONFIG_HPET is not set
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HPET is not set
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -702,6 +712,12 @@ CONFIG_MMTIMER=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -791,12 +807,14 @@ CONFIG_USB_UHCI_HCD=m
 # may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -816,6 +834,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -902,6 +921,10 @@ CONFIG_INFINIBAND_SRP=m
 CONFIG_SGI_IOC4=y
 CONFIG_SGI_IOC3=y
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -931,6 +954,7 @@ CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -973,6 +997,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1041,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1111,19 +1137,21 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set

arch/ia64/configs/tiger_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec  2 16:06:32 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:49:18 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -88,7 +90,7 @@ CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
@@ -162,6 +164,7 @@ CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -203,6 +206,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -237,6 +241,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -326,6 +335,7 @@ CONFIG_BLK_DEV_INITRD=y
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -443,13 +453,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_QLOGIC_FC=y
 # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -572,6 +576,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -676,12 +681,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -694,6 +702,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -738,10 +747,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 
 #
@@ -755,6 +764,12 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -765,6 +780,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -854,12 +870,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
@@ -873,6 +892,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -948,7 +968,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -980,6 +1000,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1021,6 +1042,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1090,6 +1112,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1157,18 +1180,20 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set

arch/ia64/configs/zx1_defconfig

@@ -1,16 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:15:01 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:55:36 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -26,17 +23,18 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -45,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,18 +58,37 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 CONFIG_IA64_HP_ZX1=y
@@ -82,18 +101,16 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_NUMA is not set
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 # CONFIG_HOTPLUG_CPU is not set
@@ -106,7 +123,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
@@ -118,7 +142,6 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 
@@ -126,6 +149,7 @@ CONFIG_BINFMT_MISC=y
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -138,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -179,6 +204,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -210,15 +236,18 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
 # CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -229,6 +258,11 @@ CONFIG_IP_NF_ARPTABLES=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -241,14 +275,16 @@ CONFIG_IP_NF_ARPTABLES=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -310,20 +346,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -407,13 +436,14 @@ CONFIG_SCSI_LOGGING=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -421,13 +451,11 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
@@ -438,17 +466,9 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -465,6 +485,7 @@ CONFIG_SCSI_QLA2XXX=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
@@ -505,6 +526,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -555,6 +577,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -652,6 +675,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -703,6 +727,7 @@ CONFIG_DRM_RADEON=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -753,11 +778,18 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -789,6 +821,7 @@ CONFIG_VIDEO_DEV=y
 #
 # Video Adapters
 #
+# CONFIG_VIDEO_ADV_DEBUG is not set
 # CONFIG_VIDEO_BT848 is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
@@ -796,14 +829,16 @@ CONFIG_VIDEO_DEV=y
 # CONFIG_TUNER_3036 is not set
 # CONFIG_VIDEO_STRADIS is not set
 # CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZR36120 is not set
 # CONFIG_VIDEO_SAA7134 is not set
 # CONFIG_VIDEO_MXB is not set
 # CONFIG_VIDEO_DPC is not set
 # CONFIG_VIDEO_HEXIUM_ORION is not set
 # CONFIG_VIDEO_HEXIUM_GEMINI is not set
 # CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_EM28XX is not set
 # CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
 
 #
 # Radio Adapters
@@ -824,7 +859,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
@@ -833,6 +867,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -848,10 +883,7 @@ CONFIG_FB_RADEON_DEBUG=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -860,6 +892,7 @@ CONFIG_FB_RADEON_DEBUG=y
 CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -892,6 +925,8 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -900,17 +935,18 @@ CONFIG_SND_SEQUENCER_OSS=y
 #
 CONFIG_SND_MPU401_UART=y
 CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -919,39 +955,39 @@ CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 CONFIG_SND_FM801=y
 CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -997,12 +1033,15 @@ CONFIG_USB_UHCI_HCD=y
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1014,13 +1053,15 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
@@ -1034,6 +1075,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1049,6 +1091,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_DABUSB is not set
 # CONFIG_USB_VICAM is not set
 # CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
 # CONFIG_USB_IBMCAM is not set
 # CONFIG_USB_KONICAWC is not set
 # CONFIG_USB_OV511 is not set
@@ -1113,7 +1156,7 @@ CONFIG_USB_MON=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -1135,6 +1178,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_INOTIFY is not set
@@ -1174,6 +1218,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1238,6 +1283,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1296,26 +1342,30 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+CONFIG_KPROBES=y
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-CONFIG_KPROBES=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 CONFIG_IA64_PRINT_HAZARDS=y

arch/ia64/defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:13:03 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:02:28 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,18 +60,37 @@ CONFIG_MODVERSIONS=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -89,14 +110,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_NUMA=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
 # CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=512
 CONFIG_HOTPLUG_CPU=y
@@ -110,19 +127,29 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -130,6 +157,7 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -144,6 +172,7 @@ CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -186,6 +215,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -220,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -232,14 +267,16 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -301,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -407,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -416,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
@@ -443,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -483,6 +510,7 @@ CONFIG_DM_MULTIPATH=m
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
 
@@ -523,6 +551,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -572,6 +601,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -676,12 +706,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -697,6 +730,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -710,6 +744,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_SGI_L1_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_SGI_IOC4=y
+# CONFIG_SERIAL_SGI_IOC3 is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -745,10 +780,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -756,12 +791,19 @@ CONFIG_MMTIMER=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -772,6 +814,7 @@ CONFIG_MMTIMER=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -822,26 +865,28 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
 #
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -850,40 +895,40 @@ CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
 CONFIG_SND_EMU10K1=m
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 CONFIG_SND_FM801=m
 # CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -929,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -946,12 +994,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -971,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1050,11 +1102,17 @@ CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
 
 #
 # SN Devices
 #
 CONFIG_SGI_IOC4=y
+CONFIG_SGI_IOC3=m
+
+#
+# EDAC - error detection and reporting (RAS)
+#
 
 #
 # File systems
@@ -1085,6 +1143,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1126,6 +1185,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1195,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1260,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # CONFIG_HP_SIMSCSI is not set
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set

arch/ia64/kernel/cyclone.c

@@ -36,7 +36,7 @@ int __init init_cyclone_clock(void)
 	u32* volatile cyclone_timer;	/* Cyclone MPMC0 register */
 
 	if (!use_cyclone)
-		return -ENODEV;
+		return 0;
 
 	printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
 

arch/ia64/kernel/fsys.S

@@ -878,8 +878,7 @@ fsyscall_table:
 	data8 0				// timer_delete
 	data8 0				// clock_settime
 	data8 fsys_clock_gettime	// clock_gettime
-	#define __NR_syscall_last	1255
 
-	.space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
-
-	.org fsyscall_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
+	// fill in zeros for the remaining entries
+	.zero:
+	.space fsyscall_table + 8*NR_syscalls - .zero, 0

arch/ia64/kernel/ivt.S

@@ -561,11 +561,12 @@ ENTRY(dirty_bit)
 	;;					// avoid RAW on r18
 	mov ar.ccv=r18				// set compare value for cmpxchg
 	or r25=_PAGE_D|_PAGE_A,r18		// set the dirty and accessed bits
+	tbit.z p7,p6 = r18,_PAGE_P_BIT		// Check present bit
 	;;
-	cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6)	cmpxchg8.acq r26=[r17],r25,ar.ccv	// Only update if page is present
 	mov r24=PAGE_SHIFT<<2
 	;;
-	cmp.eq p6,p7=r26,r18
+(p6)	cmp.eq p6,p7=r26,r18			// Only compare if page is present
 	;;
 (p6)	itc.d r25				// install updated PTE
 	;;
@@ -626,11 +627,12 @@ ENTRY(iaccess_bit)
 	;;
 	mov ar.ccv=r18				// set compare value for cmpxchg
 	or r25=_PAGE_A,r18			// set the accessed bit
+	tbit.z p7,p6 = r18,_PAGE_P_BIT	 	// Check present bit
 	;;
-	cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6)	cmpxchg8.acq r26=[r17],r25,ar.ccv	// Only if page present
 	mov r24=PAGE_SHIFT<<2
 	;;
-	cmp.eq p6,p7=r26,r18
+(p6)	cmp.eq p6,p7=r26,r18			// Only if page present
 	;;
 (p6)	itc.i r25				// install updated PTE
 	;;
@@ -680,11 +682,12 @@ ENTRY(daccess_bit)
 	;;					// avoid RAW on r18
 	mov ar.ccv=r18				// set compare value for cmpxchg
 	or r25=_PAGE_A,r18			// set the dirty bit
+	tbit.z p7,p6 = r18,_PAGE_P_BIT		// Check present bit
 	;;
-	cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6)	cmpxchg8.acq r26=[r17],r25,ar.ccv	// Only if page is present
 	mov r24=PAGE_SHIFT<<2
 	;;
-	cmp.eq p6,p7=r26,r18
+(p6)	cmp.eq p6,p7=r26,r18			// Only if page is present
 	;;
 (p6)	itc.d r25				// install updated PTE
 	/*
@@ -1362,7 +1365,6 @@ END(debug_vector)
 // 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57)
 ENTRY(unaligned_access)
 	DBG_FAULT(30)
-	mov r16=cr.ipsr
 	mov r31=pr		// prepare to save predicates
 	;;
 	br.sptk.many dispatch_unaligned_handler

arch/ia64/kernel/mca_drv.c

@@ -123,8 +123,9 @@ mca_page_isolate(unsigned long paddr)
 void
 mca_handler_bh(unsigned long paddr)
 {
-	printk(KERN_DEBUG "OS_MCA: process [pid: %d](%s) encounters MCA.\n",
-		current->pid, current->comm);
+	printk(KERN_ERR
+		"OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n",
+		current->pid, current->comm, paddr);
 
 	spin_lock(&mca_bh_lock);
 	switch (mca_page_isolate(paddr)) {
@@ -132,7 +133,7 @@ mca_handler_bh(unsigned long paddr)
 		printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr);
 		break;
 	case ISOLATE_NG:
-		printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr);
+		printk(KERN_CRIT "Page isolation: ( %lx ) failure.\n", paddr);
 		break;
 	default:
 		break;
@@ -567,10 +568,15 @@ recover_from_processor_error(int platform, slidx_table_t *slidx,
 		return 0;
 
 	/*
-	 * If there is no bus error, record is weird but we need not to recover.
+	 * The cache check and bus check bits have four possible states
+	 *   cc bc
+	 *    0  0	Weird record, not recovered
+	 *    1  0	Cache error, not recovered
+	 *    0  1	I/O error, attempt recovery
+	 *    1  1	Memory error, attempt recovery
 	 */
 	if (psp->bc == 0 || pbci == NULL)
-		return 1;
+		return 0;
 
 	/*
 	 * Sorry, we cannot handle so many.

arch/ia64/kernel/unaligned.c

@@ -24,7 +24,7 @@
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
-extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(char *str, struct pt_regs *regs, long err);
 
 #undef DEBUG_UNALIGNED_TRAP
 
@@ -52,6 +52,15 @@ dump (const char *str, void *vp, size_t len)
 #define IA64_FIRST_ROTATING_FR	32
 #define SIGN_EXT9		0xffffffffffffff00ul
 
+/*
+ *  sysctl settable hook which tells the kernel whether to honor the
+ *  IA64_THREAD_UAC_NOPRINT prctl.  Because this is user settable, we want
+ *  to allow the super user to enable/disable this for security reasons
+ *  (i.e. don't allow attacker to fill up logs with unaligned accesses).
+ */
+int no_unaligned_warning;
+static int noprint_warning;
+
 /*
  * For M-unit:
  *
@@ -1324,8 +1333,9 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 		if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0)
 			goto force_sigbus;
 
-		if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT)
-		    && within_logging_rate_limit())
+		if (!no_unaligned_warning &&
+		    !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
+		    within_logging_rate_limit())
 		{
 			char buf[200];	/* comm[] is at most 16 bytes... */
 			size_t len;
@@ -1340,7 +1350,22 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			if (user_mode(regs))
 				tty_write_message(current->signal->tty, buf);
 			buf[len-1] = '\0';	/* drop '\r' */
-			printk(KERN_WARNING "%s", buf);	/* watch for command names containing %s */
+			/* watch for command names containing %s */
+			printk(KERN_WARNING "%s", buf);
+		} else {
+			if (no_unaligned_warning && !noprint_warning) {
+				noprint_warning = 1;
+				printk(KERN_WARNING "%s(%d) encountered an "
+				       "unaligned exception which required\n"
+				       "kernel assistance, which degrades "
+				       "the performance of the application.\n"
+				       "Unaligned exception warnings have "
+				       "been disabled by the system "
+				       "administrator\n"
+				       "echo 0 > /proc/sys/kernel/ignore-"
+				       "unaligned-usertrap to re-enable\n",
+				       current->comm, current->pid);
+			}
 		}
 	} else {
 		if (within_logging_rate_limit())

arch/ia64/pci/pci.c

@@ -579,7 +579,7 @@ pcibios_align_resource (void *data, struct resource *res,
 char * __init
 pcibios_setup (char *str)
 {
-	return NULL;
+	return str;
 }
 
 int

arch/ia64/sn/kernel/io_init.c

@@ -716,4 +716,3 @@ EXPORT_SYMBOL(sn_pci_unfixup_slot);
 EXPORT_SYMBOL(sn_pci_controller_fixup);
 EXPORT_SYMBOL(sn_bus_store_sysdata);
 EXPORT_SYMBOL(sn_bus_free_sysdata);
-EXPORT_SYMBOL(sn_pcidev_info_get);

arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -446,7 +446,7 @@ static struct proc_dir_entry *proc_sn2_ptc;
 static int __init sn2_ptc_init(void)
 {
 	if (!ia64_platform_is("sn2"))
-		return -ENOSYS;
+		return 0;
 
 	if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) {
 		printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME);

arch/ia64/sn/kernel/tiocx.c

@@ -484,7 +484,7 @@ static int __init tiocx_init(void)
 	int found_tiocx_device = 0;
 
 	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
+		return 0;
 
 	bus_register(&tiocx_bus_type);
 

arch/mips/Kconfig

@@ -1053,6 +1053,7 @@ config CPU_MIPS32_R1
 	depends on SYS_HAS_CPU_MIPS32_R1
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 	help
 	  Choose this option to build a kernel for release 1 or later of the
 	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
@@ -1069,6 +1070,7 @@ config CPU_MIPS32_R2
 	depends on SYS_HAS_CPU_MIPS32_R2
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 	help
 	  Choose this option to build a kernel for release 2 or later of the
 	  MIPS32 architecture.  Most modern embedded systems with a 32-bit
@@ -1082,6 +1084,7 @@ config CPU_MIPS64_R1
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 	help
 	  Choose this option to build a kernel for release 1 or later of the
 	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
@@ -1099,6 +1102,7 @@ config CPU_MIPS64_R2
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
 	help
 	  Choose this option to build a kernel for release 2 or later of the
 	  MIPS64 architecture.  Many modern embedded systems with a 64-bit

arch/mips/Makefile

@@ -95,6 +95,7 @@ endif
 # crossformat linking we rely on the elf2ecoff tool for format conversion.
 #
 cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+cflags-y			+= -msoft-float
 LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
 MODFLAGS			+= -mlong-calls
 

arch/mips/arc/arc_con.c

@@ -24,7 +24,7 @@ static void prom_console_write(struct console *co, const char *s,
 	}
 }
 
-static int __init prom_console_setup(struct console *co, char *options)
+static int prom_console_setup(struct console *co, char *options)
 {
 	return !(prom_flags & PROM_FLAG_USE_AS_CONSOLE);
 }

arch/mips/kernel/irq-mv6434x.c

@@ -11,12 +11,14 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
-#include <asm/ptrace.h>
-#include <linux/sched.h>
 #include <linux/kernel_stat.h>
+#include <linux/mv643xx.h>
+#include <linux/sched.h>
+
+#include <asm/ptrace.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <linux/mv643xx.h>
+#include <asm/marvell.h>
 
 static unsigned int irq_base;
 

arch/mips/kernel/time.c

@@ -163,7 +163,7 @@ void do_gettimeofday(struct timeval *tv)
 	unsigned long seq;
 	unsigned long lost;
 	unsigned long usec, sec;
-	unsigned long max_ntp_tick = tick_usec - tickadj;
+	unsigned long max_ntp_tick;
 
 	do {
 		seq = read_seqbegin(&xtime_lock);
@@ -178,12 +178,13 @@ void do_gettimeofday(struct timeval *tv)
 		 * Better to lose some accuracy than have time go backwards..
 		 */
 		if (unlikely(time_adjust < 0)) {
+			max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
 			usec = min(usec, max_ntp_tick);
 
 			if (lost)
 				usec += lost * max_ntp_tick;
 		} else if (unlikely(lost))
-			usec += lost * tick_usec;
+			usec += lost * (USEC_PER_SEC / HZ);
 
 		sec = xtime.tv_sec;
 		usec += (xtime.tv_nsec / 1000);

arch/mips/kernel/vmlinux.lds.S

@@ -106,6 +106,9 @@ SECTIONS
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
   SECURITY_INIT
+    /* .exit.text is discarded at runtime, not link time, to deal with
+     references from .rodata */
+  .exit.text : { *(.exit.text) }
   . = ALIGN(_PAGE_SIZE);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }
@@ -133,7 +136,6 @@ SECTIONS
 
   /* Sections to be discarded */
   /DISCARD/ : {
-        *(.exit.text)
         *(.exit.data)
         *(.exitcall.exit)
 

arch/mips/lib/iomap.c

@@ -63,7 +63,7 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 		return ioport_map(start, len);
 	if (flags & IORESOURCE_MEM) {
 		if (flags & IORESOURCE_CACHEABLE)
-			return ioremap_cacheable_cow(start, len);
+			return ioremap_cachable(start, len);
 		return ioremap_nocache(start, len);
 	}
 

arch/mips/mm/c-r4k.c

@@ -235,7 +235,9 @@ static inline void r4k_blast_scache_page_setup(void)
 {
 	unsigned long sc_lsize = cpu_scache_line_size();
 
-	if (sc_lsize == 16)
+	if (scache_size == 0)
+		r4k_blast_scache_page = (void *)no_sc_noop;
+	else if (sc_lsize == 16)
 		r4k_blast_scache_page = blast_scache16_page;
 	else if (sc_lsize == 32)
 		r4k_blast_scache_page = blast_scache32_page;
@@ -251,7 +253,9 @@ static inline void r4k_blast_scache_page_indexed_setup(void)
 {
 	unsigned long sc_lsize = cpu_scache_line_size();
 
-	if (sc_lsize == 16)
+	if (scache_size == 0)
+		r4k_blast_scache_page_indexed = (void *)no_sc_noop;
+	else if (sc_lsize == 16)
 		r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
 	else if (sc_lsize == 32)
 		r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
@@ -267,7 +271,9 @@ static inline void r4k_blast_scache_setup(void)
 {
 	unsigned long sc_lsize = cpu_scache_line_size();
 
-	if (sc_lsize == 16)
+	if (scache_size == 0)
+		r4k_blast_scache = (void *)no_sc_noop;
+	else if (sc_lsize == 16)
 		r4k_blast_scache = blast_scache16;
 	else if (sc_lsize == 32)
 		r4k_blast_scache = blast_scache32;
@@ -482,7 +488,7 @@ static inline void local_r4k_flush_icache_range(void *args)
 			protected_blast_dcache_range(start, end);
 		}
 
-		if (!cpu_icache_snoops_remote_store) {
+		if (!cpu_icache_snoops_remote_store && scache_size) {
 			if (end - start > scache_size)
 				r4k_blast_scache();
 			else
@@ -651,7 +657,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg)
 
 	R4600_HIT_CACHEOP_WAR_IMPL;
 	protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
-	if (!cpu_icache_snoops_remote_store)
+	if (!cpu_icache_snoops_remote_store && scache_size)
 		protected_writeback_scache_line(addr & ~(sc_lsize - 1));
 	protected_flush_icache_line(addr & ~(ic_lsize - 1));
 	if (MIPS4K_ICACHE_REFILL_WAR) {

arch/mips/mm/tlbex.c

@@ -280,69 +280,69 @@ static void __init build_insn(u32 **buf, enum opcode opc, ...)
 }
 
 #define I_u1u2u3(op)						\
-	static inline void i##op(u32 **buf, unsigned int a,	\
+	static inline void __init i##op(u32 **buf, unsigned int a,	\
 	 	unsigned int b, unsigned int c)			\
 	{							\
 		build_insn(buf, insn##op, a, b, c);		\
 	}
 
 #define I_u2u1u3(op)						\
-	static inline void i##op(u32 **buf, unsigned int a,	\
+	static inline void __init i##op(u32 **buf, unsigned int a,	\
 	 	unsigned int b, unsigned int c)			\
 	{							\
 		build_insn(buf, insn##op, b, a, c);		\
 	}
 
 #define I_u3u1u2(op)						\
-	static inline void i##op(u32 **buf, unsigned int a,	\
+	static inline void __init i##op(u32 **buf, unsigned int a,	\
 	 	unsigned int b, unsigned int c)			\
 	{							\
 		build_insn(buf, insn##op, b, c, a);		\
 	}
 
 #define I_u1u2s3(op)						\
-	static inline void i##op(u32 **buf, unsigned int a,	\
+	static inline void __init i##op(u32 **buf, unsigned int a,	\
 	 	unsigned int b, signed int c)			\
 	{							\
 		build_insn(buf, insn##op, a, b, c);		\
 	}
 
 #define I_u2s3u1(op)						\
-	static inline void i##op(u32 **buf, unsigned int a,	\
+	static inline void __init i##op(u32 **buf, unsigned int a,	\
 	 	signed int b, unsigned int c)			\
 	{							\
 		build_insn(buf, insn##op, c, a, b);		\
 	}
 
 #define I_u2u1s3(op)						\
-	static inline void i##op(u32 **buf, unsigned int a,	\
+	static inline void __init i##op(u32 **buf, unsigned int a,	\
 	 	unsigned int b, signed int c)			\
 	{							\
 		build_insn(buf, insn##op, b, a, c);		\
 	}
 
 #define I_u1u2(op)						\
-	static inline void i##op(u32 **buf, unsigned int a,	\
+	static inline void __init i##op(u32 **buf, unsigned int a,	\
 	 	unsigned int b)					\
 	{							\
 		build_insn(buf, insn##op, a, b);		\
 	}
 
 #define I_u1s2(op)						\
-	static inline void i##op(u32 **buf, unsigned int a,	\
+	static inline void __init i##op(u32 **buf, unsigned int a,	\
 	 	signed int b)					\
 	{							\
 		build_insn(buf, insn##op, a, b);		\
 	}
 
 #define I_u1(op)						\
-	static inline void i##op(u32 **buf, unsigned int a)	\
+	static inline void __init i##op(u32 **buf, unsigned int a)	\
 	{							\
 		build_insn(buf, insn##op, a);			\
 	}
 
 #define I_0(op)							\
-	static inline void i##op(u32 **buf)			\
+	static inline void __init i##op(u32 **buf)		\
 	{							\
 		build_insn(buf, insn##op);			\
 	}
@@ -623,42 +623,42 @@ static __init int __attribute__((unused)) insn_has_bdelay(struct reloc *rel,
 }
 
 /* convenience functions for labeled branches */
-static void __attribute__((unused)) il_bltz(u32 **p, struct reloc **r,
-					    unsigned int reg, enum label_id l)
+static void __init __attribute__((unused))
+	il_bltz(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
 {
 	r_mips_pc16(r, *p, l);
 	i_bltz(p, reg, 0);
 }
 
-static void __attribute__((unused)) il_b(u32 **p, struct reloc **r,
+static void __init __attribute__((unused)) il_b(u32 **p, struct reloc **r,
 					 enum label_id l)
 {
 	r_mips_pc16(r, *p, l);
 	i_b(p, 0);
 }
 
-static void il_beqz(u32 **p, struct reloc **r, unsigned int reg,
+static void __init il_beqz(u32 **p, struct reloc **r, unsigned int reg,
 		    enum label_id l)
 {
 	r_mips_pc16(r, *p, l);
 	i_beqz(p, reg, 0);
 }
 
-static void __attribute__((unused))
+static void __init __attribute__((unused))
 il_beqzl(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
 {
 	r_mips_pc16(r, *p, l);
 	i_beqzl(p, reg, 0);
 }
 
-static void il_bnez(u32 **p, struct reloc **r, unsigned int reg,
+static void __init il_bnez(u32 **p, struct reloc **r, unsigned int reg,
 		    enum label_id l)
 {
 	r_mips_pc16(r, *p, l);
 	i_bnez(p, reg, 0);
 }
 
-static void il_bgezl(u32 **p, struct reloc **r, unsigned int reg,
+static void __init il_bgezl(u32 **p, struct reloc **r, unsigned int reg,
 		     enum label_id l)
 {
 	r_mips_pc16(r, *p, l);

arch/mips/momentum/jaguar_atx/prom.c

@@ -21,10 +21,10 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/bootmem.h>
+#include <linux/mv643xx.h>
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
-#include <asm/mv64340.h>
 #include <asm/pmon.h>
 
 #include "jaguar_atx_fpga.h"

arch/mips/momentum/jaguar_atx/setup.c

@@ -2,7 +2,7 @@
  * BRIEF MODULE DESCRIPTION
  * Momentum Computer Jaguar-ATX board dependent boot routines
  *
- * Copyright (C) 1996, 1997, 2001, 2004  Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1996, 1997, 2001, 04, 06  Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 2000 RidgeRun, Inc.
  * Copyright (C) 2001 Red Hat, Inc.
  * Copyright (C) 2002 Momentum Computer
@@ -55,6 +55,8 @@
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/vmalloc.h>
+#include <linux/mv643xx.h>
+
 #include <asm/time.h>
 #include <asm/bootinfo.h>
 #include <asm/page.h>
@@ -64,7 +66,6 @@
 #include <asm/ptrace.h>
 #include <asm/reboot.h>
 #include <asm/tlbflush.h>
-#include <asm/mv64340.h>
 
 #include "jaguar_atx_fpga.h"
 

arch/mips/momentum/ocelot_c/irq.c

@@ -41,11 +41,11 @@
 #include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/bitops.h>
+#include <linux/mv643xx.h>
 #include <asm/bootinfo.h>
 #include <asm/io.h>
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
-#include <asm/mv64340.h>
 #include <asm/system.h>
 
 extern asmlinkage void ocelot_handle_int(void);

arch/mips/momentum/ocelot_c/prom.c

@@ -19,10 +19,10 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/bootmem.h>
+#include <linux/mv643xx.h>
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
-#include <asm/mv64340.h>
 #include <asm/pmon.h>
 
 #include "ocelot_c_fpga.h"

arch/mips/momentum/ocelot_c/setup.c

@@ -54,6 +54,7 @@
 #include <linux/pm.h>
 #include <linux/timex.h>
 #include <linux/vmalloc.h>
+#include <linux/mv643xx.h>
 
 #include <asm/time.h>
 #include <asm/bootinfo.h>
@@ -64,9 +65,9 @@
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/reboot.h>
+#include <asm/marvell.h>
 #include <linux/bootmem.h>
 #include <linux/blkdev.h>
-#include <asm/mv64340.h>
 #include "ocelot_c_fpga.h"
 
 unsigned long marvell_base;
@@ -252,22 +253,22 @@ void __init plat_setup(void)
 	/* shut down ethernet ports, just to be sure our memory doesn't get
 	 * corrupted by random ethernet traffic.
 	 */
-	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
-	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
 	do {}
-	  while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+	  while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
 	do {}
-	  while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+	  while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
 	do {}
-	  while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+	  while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
 	do {}
-	  while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
-	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
-	         MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
-	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
-	         MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+	  while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
+	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
+	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
 
 	/* Turn off the Bit-Error LED */
 	OCELOT_FPGA_WRITE(0x80, CLR);

arch/mips/pci/pci-ocelot-c.c

@@ -3,15 +3,17 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2004, 06 by Ralf Baechle (ralf@linux-mips.org)
  */
 
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <asm/mv64340.h>
+#include <linux/mv643xx.h>
 
 #include <linux/init.h>
 
+#include <asm/marvell.h>
+
 /*
  * We assume the address ranges have already been setup appropriately by
  * the firmware.  PMON in case of the Ocelot C does that.

arch/powerpc/Kconfig

@@ -607,7 +607,7 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "kernel crash dumps (EXPERIMENTAL)"
+	bool "Build a kdump crash kernel (EXPERIMENTAL)"
 	depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.

arch/powerpc/boot/crt0.S

@@ -45,7 +45,8 @@ _zimage_start:
 	bdnz	2b
 
 	/* Do a cache flush for our text, in case OF didn't */
-3:	lis	r9,_start@h
+3:	lis	r9,_start@ha
+	addi	r9,r9,_start@l
 	add	r9,r0,r9
 	lis	r8,_etext@ha
 	addi	r8,r8,_etext@l
@@ -53,7 +54,7 @@ _zimage_start:
 4:	dcbf	r0,r9
 	icbi	r0,r9
 	addi	r9,r9,0x20
-	cmplwi	0,r9,8
+	cmplw	cr0,r9,r8
 	blt	4b
 	sync
 	isync

arch/powerpc/configs/cell_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:26 2005
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:48 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -16,6 +16,10 @@ CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -33,7 +37,6 @@ CONFIG_NR_CPUS=4
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -48,8 +51,6 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -111,7 +116,6 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 CONFIG_PPC_CELL=y
-CONFIG_PPC_OF=y
 # CONFIG_U3_DART is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
@@ -120,10 +124,14 @@ CONFIG_RTAS_FLASH=y
 CONFIG_MMIO_NVRAM=y
 CONFIG_CELL_IIC=y
 # CONFIG_PPC_MPC106 is not set
-# CONFIG_GENERIC_TBSYNC is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
+#
+# Cell Broadband Engine options
+#
+CONFIG_SPU_FS=y
+
 #
 # Kernel options
 #
@@ -140,6 +148,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -191,6 +200,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -234,6 +244,25 @@ CONFIG_NETFILTER=y
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -251,37 +280,23 @@ CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -297,11 +312,8 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -311,7 +323,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -322,6 +333,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -540,9 +556,11 @@ CONFIG_E1000=m
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 CONFIG_SKGE=m
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_SPIDER_NET=y
 # CONFIG_MV643XX_ETH is not set
 
 #
@@ -628,13 +646,16 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -646,6 +667,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -755,6 +777,12 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -827,7 +855,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -847,6 +875,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -886,6 +915,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -951,6 +981,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1021,18 +1052,20 @@ CONFIG_TEXTSEARCH_FSM=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1040,6 +1073,11 @@ CONFIG_DEBUGGER=y
 # CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
 
 #
 # Security options

arch/powerpc/configs/iseries_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:32 2005
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:52 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -16,6 +16,10 @@ CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -33,7 +37,6 @@ CONFIG_NR_CPUS=32
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -49,8 +52,6 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
@@ -60,8 +61,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -70,8 +73,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -113,7 +118,6 @@ CONFIG_PPC_ISERIES=y
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
 # CONFIG_PPC_MPC106 is not set
-# CONFIG_GENERIC_TBSYNC is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -183,6 +187,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -220,6 +225,28 @@ CONFIG_NETFILTER=y
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -237,39 +264,23 @@ CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -285,13 +296,9 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -305,6 +312,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -451,13 +463,7 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -574,6 +580,7 @@ CONFIG_E1000=m
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -722,6 +729,12 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -788,7 +801,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -825,6 +838,7 @@ CONFIG_XFS_EXPORT=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -865,6 +879,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -993,31 +1008,36 @@ CONFIG_TEXTSEARCH_FSM=m
 #
 # Instrumentation Support
 #
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 # CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
 
 #
 # Security options

arch/powerpc/configs/maple_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:36 2005
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:54 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -16,6 +16,10 @@ CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -32,7 +36,6 @@ CONFIG_NR_CPUS=2
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -47,8 +50,6 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
@@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -111,14 +116,12 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
 CONFIG_U3_DART=y
 CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
-CONFIG_GENERIC_TBSYNC=y
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -138,6 +141,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -189,6 +193,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -226,6 +231,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -461,6 +471,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -553,6 +564,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -650,6 +662,12 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -738,12 +756,14 @@ CONFIG_USB_UHCI_HCD=y
 # may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
@@ -757,6 +777,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -797,6 +818,7 @@ CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ANYDATA is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
@@ -873,7 +895,7 @@ CONFIG_USB_EZUSB=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -891,6 +913,7 @@ CONFIG_JBD=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -927,6 +950,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -988,6 +1012,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1053,18 +1078,20 @@ CONFIG_ZLIB_INFLATE=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -1073,6 +1100,11 @@ CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 # CONFIG_IRQSTACKS is not set
 CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
 
 #
 # Security options

arch/powerpc/configs/mpc834x_sys_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-g461d4edf-dirty
-# Fri Jan 13 11:01:47 2006
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:56 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -43,7 +43,6 @@ CONFIG_PPC_STD_MMU_32=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -189,6 +188,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -226,6 +226,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -511,6 +516,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -614,6 +620,12 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -632,6 +644,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -716,7 +729,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -826,6 +839,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -899,13 +913,3 @@ CONFIG_CRYPTO_DES=y
 #
 # Hardware crypto devices
 #
-
-#
-# SEC2.x Options
-#
-CONFIG_MPC8349E_SEC2x=y
-
-#
-# SEC2.x Test Options
-#
-CONFIG_MPC8349E_SEC2xTEST=y

arch/powerpc/configs/pmac32_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Sat Jan 14 16:26:08 2006
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:21:32 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -17,8 +17,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_CRASH_DUMP is not set
 # CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
@@ -43,7 +43,6 @@ CONFIG_PPC_STD_MMU_32=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -236,6 +235,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -271,6 +271,25 @@ CONFIG_NETFILTER=y
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -288,37 +307,22 @@ CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-CONFIG_IP_NF_MATCH_DCCP=m
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-# CONFIG_IP_NF_TARGET_LOG is not set
+CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -331,9 +335,12 @@ CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
-# CONFIG_IP_NF_MANGLE is not set
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -360,6 +367,11 @@ CONFIG_IP_DCCP_TFRC_LIB=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -377,6 +389,7 @@ CONFIG_IP_DCCP_TFRC_LIB=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -568,7 +581,6 @@ CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
@@ -654,8 +666,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -991,6 +1002,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=m
 CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -1097,6 +1109,12 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -1348,6 +1366,7 @@ CONFIG_USB_PRINTER=m
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
@@ -1488,7 +1507,7 @@ CONFIG_USB_EZUSB=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -1609,6 +1628,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1692,6 +1712,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y

arch/powerpc/configs/ppc64_defconfig

@@ -407,7 +407,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y

arch/powerpc/kernel/asm-offsets.c

@@ -92,7 +92,6 @@ int main(void)
 
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
-	DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame));
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 #ifdef CONFIG_PPC32
 	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));

arch/powerpc/kernel/cputable.c

@@ -53,8 +53,10 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 				 PPC_FEATURE_HAS_MMU)
 #define COMMON_USER_PPC64	(COMMON_USER | PPC_FEATURE_64)
 #define COMMON_USER_POWER4	(COMMON_USER_PPC64 | PPC_FEATURE_POWER4)
-#define COMMON_USER_POWER5	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5)
-#define COMMON_USER_POWER5_PLUS	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS)
+#define COMMON_USER_POWER5	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5 |\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
+#define COMMON_USER_POWER5_PLUS	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
 				 PPC_FEATURE_BOOKE)
 
@@ -267,7 +269,8 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_name		= "Cell Broadband Engine",
 		.cpu_features		= CPU_FTRS_CELL,
 		.cpu_user_features	= COMMON_USER_PPC64 |
-			PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP,
+			PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP |
+			PPC_FEATURE_SMT,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.cpu_setup		= __setup_cpu_be,

arch/powerpc/kernel/entry_32.S

@@ -227,7 +227,7 @@ ret_from_syscall:
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
 	li	r8,-_LAST_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK)
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	syscall_exit_work
 	cmplw	0,r3,r8
 	blt+	syscall_exit_cont
@@ -287,8 +287,10 @@ syscall_dotrace:
 
 syscall_exit_work:
 	andi.	r0,r9,_TIF_RESTOREALL
-	bne-	2f
-	cmplw	0,r3,r8
+	beq+	0f
+	REST_NVGPRS(r1)
+	b	2f
+0:	cmplw	0,r3,r8
 	blt+	1f
 	andi.	r0,r9,_TIF_NOERROR
 	bne-	1f
@@ -302,9 +304,7 @@ syscall_exit_work:
 2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
 	beq	4f
 
-	/* Clear per-syscall TIF flags if any are set, but _leave_
-	_TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
-	yet.  */
+	/* Clear per-syscall TIF flags if any are set.  */
 
 	li	r11,_TIF_PERSYSCALL_MASK
 	addi	r12,r12,TI_FLAGS
@@ -318,8 +318,13 @@ syscall_exit_work:
 	subi	r12,r12,TI_FLAGS
 	
 4:	/* Anything which requires enabling interrupts? */
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
-	beq	7f
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+	beq	ret_from_except
+
+	/* Re-enable interrupts */
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)
 
 	/* Save NVGPRS if they're not saved already */
 	lwz	r4,_TRAP(r1)
@@ -328,71 +333,11 @@ syscall_exit_work:
 	SAVE_NVGPRS(r1)
 	li	r4,0xc00
 	stw	r4,_TRAP(r1)
-
-	/* Re-enable interrupts */
-5:	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)
-
-	andi.	r0,r9,_TIF_SAVE_NVGPRS
-	bne	save_user_nvgprs
-
-save_user_nvgprs_cont:
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
-	beq	7f
-
+5:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_syscall_trace_leave
-	REST_NVGPRS(r1)
-
-6:	lwz	r3,GPR3(r1)
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
-	SYNC
-	MTMSRD(r10)		/* disable interrupts again */
-	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
-	lwz	r9,TI_FLAGS(r12)
-7:
-	andi.	r0,r9,_TIF_NEED_RESCHED
-	bne	8f
-	lwz	r5,_MSR(r1)
-	andi.	r5,r5,MSR_PR
-	beq	ret_from_except
-	andi.	r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK
-	beq	ret_from_except
-	b	do_user_signal
-8:
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)		/* re-enable interrupts */
-	bl	schedule
-	b	6b
-
-save_user_nvgprs:
-	lwz	r8,TI_SIGFRAME(r12)
-
-.macro savewords start, end
-  1:	stw \start,4*(\start)(r8)
-	.section __ex_table,"a"
-	.align	2
-	.long	1b,save_user_nvgprs_fault
-	.previous
-	.if \end - \start
-	savewords "(\start+1)",\end
-	.endif
-.endm	
-	savewords 14,31
-	b	save_user_nvgprs_cont
-
-	
-save_user_nvgprs_fault:
-	li	r3,11		/* SIGSEGV */
-	lwz	r4,TI_TASK(r12)
-	bl	force_sigsegv
+	b	ret_from_except_full
 
-	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
-	lwz	r9,TI_FLAGS(r12)
-	b	save_user_nvgprs_cont
-	
 #ifdef SHOW_SYSCALLS
 do_show_syscall:
 #ifdef SHOW_SYSCALLS_TASK
@@ -490,6 +435,14 @@ ppc_clone:
 	stw	r0,_TRAP(r1)		/* register set saved */
 	b	sys_clone
 
+	.globl	ppc_swapcontext
+ppc_swapcontext:
+	SAVE_NVGPRS(r1)
+	lwz	r0,_TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,_TRAP(r1)		/* register set saved */
+	b	sys_swapcontext
+
 /*
  * Top-level page fault handling.
  * This is in assembler because if do_page_fault tells us that
@@ -683,7 +636,7 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 	/* Check current_thread_info()->flags */
 	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
 	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK)
+	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
 	bne	do_work
 
 restore_user:

arch/powerpc/kernel/entry_64.S

@@ -159,7 +159,7 @@ syscall_exit:
 	mtmsrd	r10,1
 	ld	r9,TI_FLAGS(r12)
 	li	r11,-_LAST_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_SAVE_NVGPRS|_TIF_NOERROR|_TIF_RESTORE_SIGMASK)
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	syscall_exit_work
 	cmpld	r3,r11
 	ld	r5,_CCR(r1)
@@ -216,8 +216,10 @@ syscall_exit_work:
 	 If TIF_NOERROR is set, just save r3 as it is. */
 
 	andi.	r0,r9,_TIF_RESTOREALL
-	bne-	2f
-	cmpld	r3,r11		/* r10 is -LAST_ERRNO */
+	beq+	0f
+	REST_NVGPRS(r1)
+	b	2f
+0:	cmpld	r3,r11		/* r10 is -LAST_ERRNO */
 	blt+	1f
 	andi.	r0,r9,_TIF_NOERROR
 	bne-	1f
@@ -229,9 +231,7 @@ syscall_exit_work:
 2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
 	beq	4f
 
-	/* Clear per-syscall TIF flags if any are set, but _leave_
-	_TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
-	yet.  */
+	/* Clear per-syscall TIF flags if any are set.  */
 
 	li	r11,_TIF_PERSYSCALL_MASK
 	addi	r12,r12,TI_FLAGS
@@ -240,10 +240,9 @@ syscall_exit_work:
 	stdcx.	r10,0,r12
 	bne-	3b
 	subi	r12,r12,TI_FLAGS
-	
-4:	bl	.save_nvgprs
-	/* Anything else left to do? */
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
+
+4:	/* Anything else left to do? */
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
 	beq	.ret_from_except_lite
 
 	/* Re-enable interrupts */
@@ -251,26 +250,10 @@ syscall_exit_work:
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1
 
-	andi.	r0,r9,_TIF_SAVE_NVGPRS
-	bne	save_user_nvgprs
-
-	/* If tracing, re-enable interrupts and do it */
-save_user_nvgprs_cont:	
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
-	beq	5f
-	
+	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_syscall_trace_leave
-	REST_NVGPRS(r1)
-	clrrdi	r12,r1,THREAD_SHIFT
-
-	/* Disable interrupts again and handle other work if any */
-5:	mfmsr	r10
-	rldicl	r10,r10,48,1
-	rotldi	r10,r10,16
-	mtmsrd	r10,1
-
-	b	.ret_from_except_lite
+	b	.ret_from_except
 
 /* Save non-volatile GPRs, if not already saved. */
 _GLOBAL(save_nvgprs)
@@ -282,51 +265,6 @@ _GLOBAL(save_nvgprs)
 	std	r0,_TRAP(r1)
 	blr
 
-
-save_user_nvgprs:
-	ld	r10,TI_SIGFRAME(r12)
-	andi.	r0,r9,_TIF_32BIT
-	beq-	save_user_nvgprs_64
-
-	/* 32-bit save to userspace */
-
-.macro savewords start, end
-  1:	stw \start,4*(\start)(r10)
-	.section __ex_table,"a"
-	.align	3
-	.llong	1b,save_user_nvgprs_fault
-	.previous
-	.if \end - \start
-	savewords "(\start+1)",\end
-	.endif
-.endm	
-	savewords 14,31
-	b	save_user_nvgprs_cont
-
-save_user_nvgprs_64:
-	/* 64-bit save to userspace */
-
-.macro savelongs start, end
-  1:	std \start,8*(\start)(r10)
-	.section __ex_table,"a"
-	.align	3
-	.llong	1b,save_user_nvgprs_fault
-	.previous
-	.if \end - \start
-	savelongs "(\start+1)",\end
-	.endif
-.endm	
-	savelongs 14,31
-	b	save_user_nvgprs_cont
-
-save_user_nvgprs_fault:
-	li	r3,11		/* SIGSEGV */
-	ld	r4,TI_TASK(r12)
-	bl	.force_sigsegv
-
-	clrrdi	r12,r1,THREAD_SHIFT
-	ld	r9,TI_FLAGS(r12)
-	b	save_user_nvgprs_cont
 	
 /*
  * The sigsuspend and rt_sigsuspend system calls can call do_signal
@@ -352,6 +290,16 @@ _GLOBAL(ppc_clone)
 	bl	.sys_clone
 	b	syscall_exit
 
+_GLOBAL(ppc32_swapcontext)
+	bl	.save_nvgprs
+	bl	.compat_sys_swapcontext
+	b	syscall_exit
+
+_GLOBAL(ppc64_swapcontext)
+	bl	.save_nvgprs
+	bl	.sys_swapcontext
+	b	syscall_exit
+
 _GLOBAL(ret_from_fork)
 	bl	.schedule_tail
 	REST_NVGPRS(r1)

arch/powerpc/kernel/head_64.S

@@ -1544,6 +1544,9 @@ _STATIC(__boot_from_prom)
 	mr	r28,r6
 	mr	r27,r7
 
+	/* Align the stack to 16-byte boundary for broken yaboot */
+	rldicr	r1,r1,0,59
+
 	/* Make sure we are running in 64 bits mode */
 	bl	.enable_64b_mode
 

arch/powerpc/kernel/pci_64.c

@@ -589,7 +589,6 @@ void __devinit scan_phb(struct pci_controller *hose)
 #endif /* CONFIG_PPC_MULTIPLATFORM */
 	if (mode == PCI_PROBE_NORMAL)
 		hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
-	pci_bus_add_devices(bus);
 }
 
 static int __init pcibios_init(void)
@@ -608,8 +607,10 @@ static int __init pcibios_init(void)
 	printk("PCI: Probing PCI hardware\n");
 
 	/* Scan all of the recorded PCI controllers.  */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
 		scan_phb(hose);
+		pci_bus_add_devices(hose->bus);
+	}
 
 #ifndef CONFIG_PPC_ISERIES
 	if (pci_probe_only)

arch/powerpc/kernel/ppc_ksyms.c

@@ -109,15 +109,6 @@ EXPORT_SYMBOL(_insw_ns);
 EXPORT_SYMBOL(_outsw_ns);
 EXPORT_SYMBOL(_insl_ns);
 EXPORT_SYMBOL(_outsl_ns);
-EXPORT_SYMBOL(ioremap);
-#ifdef CONFIG_44x
-EXPORT_SYMBOL(ioremap64);
-#endif
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
-#endif
 
 #if defined(CONFIG_PPC32) && (defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE))
 EXPORT_SYMBOL(ppc_ide_md);
@@ -160,7 +151,6 @@ EXPORT_SYMBOL(__flush_icache_range);
 EXPORT_SYMBOL(flush_dcache_range);
 
 #ifdef CONFIG_SMP
-EXPORT_SYMBOL(smp_call_function);
 #ifdef CONFIG_PPC32
 EXPORT_SYMBOL(smp_hw_index);
 #endif

arch/powerpc/kernel/prom_init.c

@@ -978,7 +978,7 @@ static void __init prom_init_mem(void)
 			if (size == 0)
 				continue;
 			prom_debug("    %x %x\n", base, size);
-			if (base == 0)
+			if (base == 0 && (RELOC(of_platform) & PLATFORM_LPAR))
 				RELOC(rmo_top) = size;
 			if ((base + size) > RELOC(ram_top))
 				RELOC(ram_top) = base + size;

arch/powerpc/kernel/ptrace.c

@@ -561,10 +561,7 @@ void do_syscall_trace_leave(struct pt_regs *regs)
 				   regs->result);
 
 	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-#ifdef CONFIG_PPC64
-	     || test_thread_flag(TIF_SINGLESTEP)
-#endif
-	     )
+	     || test_thread_flag(TIF_SINGLESTEP))
 	    && (current->ptrace & PT_PTRACED))
 		do_syscall_trace();
 }

arch/powerpc/kernel/rtas-rtc.c

@@ -52,7 +52,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
 		error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
 		if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
 			if (in_interrupt() && printk_ratelimit()) {
-				memset(&rtc_tm, 0, sizeof(struct rtc_time));
+				memset(rtc_tm, 0, sizeof(struct rtc_time));
 				printk(KERN_WARNING "error: reading clock"
 				       " would delay interrupt\n");
 				return;	/* delay not allowed */

arch/powerpc/kernel/rtas_pci.c

@@ -278,8 +278,7 @@ static int phb_set_bus_ranges(struct device_node *dev,
 	return 0;
 }
 
-static int __devinit setup_phb(struct device_node *dev,
-			       struct pci_controller *phb)
+int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb)
 {
 	if (is_python(dev))
 		python_countermeasures(dev);
@@ -357,27 +356,6 @@ unsigned long __init find_and_init_phbs(void)
 	return 0;
 }
 
-struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
-{
-	struct pci_controller *phb;
-	int primary;
-
-	primary = list_empty(&hose_list);
-	phb = pcibios_alloc_controller(dn);
-	if (!phb)
-		return NULL;
-	setup_phb(dn, phb);
-	pci_process_bridge_OF_ranges(phb, dn, primary);
-
-	pci_setup_phb_io_dynamic(phb, primary);
-
-	pci_devs_phb_init_dynamic(phb);
-	scan_phb(phb);
-
-	return phb;
-}
-EXPORT_SYMBOL(init_phb_dynamic);
-
 /* RPA-specific bits for removing PHBs */
 int pcibios_remove_root_bus(struct pci_controller *phb)
 {

arch/powerpc/kernel/signal_32.c

@@ -151,10 +151,7 @@ static inline int save_general_regs(struct pt_regs *regs,
 	elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
 	int i;
 
-	if (!FULL_REGS(regs)) {
-		set_thread_flag(TIF_SAVE_NVGPRS);
-		current_thread_info()->nvgprs_frame = frame->mc_gregs;
-	}
+	WARN_ON(!FULL_REGS(regs));
 
 	for (i = 0; i <= PT_RESULT; i ++) {
 		if (i == 14 && !FULL_REGS(regs))
@@ -215,15 +212,7 @@ static inline int get_old_sigaction(struct k_sigaction *new_ka,
 static inline int save_general_regs(struct pt_regs *regs,
 		struct mcontext __user *frame)
 {
-	if (!FULL_REGS(regs)) {
-		/* Zero out the unsaved GPRs to avoid information
-		   leak, and set TIF_SAVE_NVGPRS to ensure that the
-		   registers do actually get saved later. */
-		memset(&regs->gpr[14], 0, 18 * sizeof(unsigned long));
-		current_thread_info()->nvgprs_frame = &frame->mc_gregs;
-		set_thread_flag(TIF_SAVE_NVGPRS);
-	}
-
+	WARN_ON(!FULL_REGS(regs));
 	return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE);
 }
 
@@ -826,8 +815,8 @@ static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int
 }
 
 long sys_swapcontext(struct ucontext __user *old_ctx,
-		       struct ucontext __user *new_ctx,
-		       int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
+		     struct ucontext __user *new_ctx,
+		     int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
 {
 	unsigned char tmp;
 

arch/powerpc/kernel/signal_64.c

@@ -116,14 +116,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	err |= __put_user(0, &sc->v_regs);
 #endif /* CONFIG_ALTIVEC */
 	err |= __put_user(&sc->gp_regs, &sc->regs);
-	if (!FULL_REGS(regs)) {
-		/* Zero out the unsaved GPRs to avoid information
-		   leak, and set TIF_SAVE_NVGPRS to ensure that the
-		   registers do actually get saved later. */
-		memset(&regs->gpr[14], 0, 18 * sizeof(unsigned long));
-		set_thread_flag(TIF_SAVE_NVGPRS);
-		current_thread_info()->nvgprs_frame = &sc->gp_regs;
-	}
+	WARN_ON(!FULL_REGS(regs));
 	err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
 	err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
 	err |= __put_user(signr, &sc->signal);

arch/powerpc/kernel/systbl.S

@@ -288,7 +288,7 @@ COMPAT_SYS(clock_settime)
 COMPAT_SYS(clock_gettime)
 COMPAT_SYS(clock_getres)
 COMPAT_SYS(clock_nanosleep)
-COMPAT_SYS(swapcontext)
+SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
 COMPAT_SYS(tgkill)
 COMPAT_SYS(utimes)
 COMPAT_SYS(statfs64)

arch/powerpc/kernel/time.c

@@ -503,9 +503,9 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
 	 * the two values of tb_update_count match and are even then the
 	 * tb_to_xs and stamp_xsec values are consistent.  If not, then it
 	 * loops back and reads them again until this criteria is met.
+	 * We expect the caller to have done the first increment of
+	 * vdso_data->tb_update_count already.
 	 */
-	++(vdso_data->tb_update_count);
-	smp_wmb();
 	vdso_data->tb_orig_stamp = new_tb_stamp;
 	vdso_data->stamp_xsec = new_stamp_xsec;
 	vdso_data->tb_to_xs = new_tb_to_xs;
@@ -530,20 +530,15 @@ static __inline__ void timer_recalc_offset(u64 cur_tb)
 	unsigned long offset;
 	u64 new_stamp_xsec;
 	u64 tlen, t2x;
+	u64 tb, xsec_old, xsec_new;
+	struct gettimeofday_vars *varp;
 
 	if (__USE_RTC())
 		return;
 	tlen = current_tick_length();
 	offset = cur_tb - do_gtod.varp->tb_orig_stamp;
-	if (tlen == last_tick_len && offset < 0x80000000u) {
-		/* check that we're still in sync; if not, resync */
-		struct timeval tv;
-		__do_gettimeofday(&tv, cur_tb);
-		if (tv.tv_sec <= xtime.tv_sec &&
-		    (tv.tv_sec < xtime.tv_sec ||
-		     tv.tv_usec * 1000 <= xtime.tv_nsec))
-			return;
-	}
+	if (tlen == last_tick_len && offset < 0x80000000u)
+		return;
 	if (tlen != last_tick_len) {
 		t2x = mulhdu(tlen << TICKLEN_SHIFT, ticklen_to_xs);
 		last_tick_len = tlen;
@@ -552,6 +547,21 @@ static __inline__ void timer_recalc_offset(u64 cur_tb)
 	new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
 	do_div(new_stamp_xsec, 1000000000);
 	new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
+
+	++vdso_data->tb_update_count;
+	smp_mb();
+
+	/*
+	 * Make sure time doesn't go backwards for userspace gettimeofday.
+	 */
+	tb = get_tb();
+	varp = do_gtod.varp;
+	xsec_old = mulhdu(tb - varp->tb_orig_stamp, varp->tb_to_xs)
+		+ varp->stamp_xsec;
+	xsec_new = mulhdu(tb - cur_tb, t2x) + new_stamp_xsec;
+	if (xsec_new < xsec_old)
+		new_stamp_xsec += xsec_old - xsec_new;
+
 	update_gtod(cur_tb, new_stamp_xsec, t2x);
 }
 
@@ -800,6 +810,10 @@ int do_settimeofday(struct timespec *tv)
 	}
 #endif
 
+	/* Make userspace gettimeofday spin until we're done. */
+	++vdso_data->tb_update_count;
+	smp_mb();
+
 	/*
 	 * Subtract off the number of nanoseconds since the
 	 * beginning of the last tick.
@@ -961,10 +975,16 @@ void __init time_init(void)
 	 * It is computed as:
 	 * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9)
 	 * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT
-	 * so as to give the result as a 0.64 fixed-point fraction.
+	 * which turns out to be N = 51 - SHIFT_HZ.
+	 * This gives the result as a 0.64 fixed-point fraction.
+	 * That value is reduced by an offset amounting to 1 xsec per
+	 * 2^31 timebase ticks to avoid problems with time going backwards
+	 * by 1 xsec when we do timer_recalc_offset due to losing the
+	 * fractional xsec.  That offset is equal to ppc_tb_freq/2^51
+	 * since there are 2^20 xsec in a second.
 	 */
-	div128_by_32(1ULL << (64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT), 0,
-		     tb_ticks_per_jiffy, &res);
+	div128_by_32((1ULL << 51) - ppc_tb_freq, 0,
+		     tb_ticks_per_jiffy << SHIFT_HZ, &res);
 	div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res);
 	ticklen_to_xs = res.result_low;
 

arch/powerpc/kernel/traps.c

@@ -814,6 +814,8 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 		return;
 	}
 
+	local_irq_enable();
+
 	/* Try to emulate it if we should. */
 	if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
 		switch (emulate_instruction(regs)) {

arch/powerpc/kernel/vdso.c

@@ -180,8 +180,8 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma,
 	unsigned long offset = address - vma->vm_start;
 	struct page *pg;
 #ifdef CONFIG_PPC64
-	void *vbase = test_thread_flag(TIF_32BIT) ?
-		vdso32_kbase : vdso64_kbase;
+	void *vbase = (vma->vm_mm->task_size > TASK_SIZE_USER32) ?
+		vdso64_kbase : vdso32_kbase;
 #else
 	void *vbase = vdso32_kbase;
 #endif

arch/powerpc/mm/lmb.c

@@ -232,7 +232,7 @@ unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
 
 	alloc = __lmb_alloc_base(size, align, max_addr);
 
-	if (alloc < 0)
+	if (alloc == 0)
 		panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n",
 				size, max_addr);
 

arch/powerpc/mm/pgtable_32.c

@@ -37,6 +37,7 @@
 
 unsigned long ioremap_base;
 unsigned long ioremap_bot;
+EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
 int io_bat_index;
 
 #if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
@@ -153,6 +154,7 @@ ioremap64(unsigned long long addr, unsigned long size)
 {
 	return __ioremap(addr, size, _PAGE_NO_CACHE);
 }
+EXPORT_SYMBOL(ioremap64);
 
 void __iomem *
 ioremap(phys_addr_t addr, unsigned long size)
@@ -162,6 +164,7 @@ ioremap(phys_addr_t addr, unsigned long size)
 	return ioremap64(addr64, size);
 }
 #endif /* CONFIG_PHYS_64BIT */
+EXPORT_SYMBOL(ioremap);
 
 void __iomem *
 __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
@@ -247,6 +250,7 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 out:
 	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
 }
+EXPORT_SYMBOL(__ioremap);
 
 void iounmap(volatile void __iomem *addr)
 {
@@ -259,6 +263,7 @@ void iounmap(volatile void __iomem *addr)
 	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
 		vunmap((void *) (PAGE_MASK & (unsigned long)addr));
 }
+EXPORT_SYMBOL(iounmap);
 
 void __iomem *ioport_map(unsigned long port, unsigned int len)
 {

arch/powerpc/platforms/powermac/feature.c

@@ -2489,9 +2489,7 @@ found:
 			pmac_mb.model_id = PMAC_TYPE_COMET;
 		iounmap(mach_id_ptr);
 	}
-#endif /* CONFIG_POWER4 */
 
-#ifdef CONFIG_6xx
 	/* Set default value of powersave_nap on machines that support it.
 	 * It appears that uninorth rev 3 has a problem with it, we don't
 	 * enable it on those. In theory, the flush-on-lock property is
@@ -2520,10 +2518,11 @@ found:
 	 * NAP mode
 	 */
 	powersave_lowspeed = 1;
-#endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
+
+#else /* CONFIG_POWER4 */
 	powersave_nap = 1;
-#endif
+#endif  /* CONFIG_POWER4 */
+
 	/* Check for "mobile" machine */
 	if (model && (strncmp(model, "PowerBook", 9) == 0
 		   || strncmp(model, "iBook", 5) == 0))