dma: move dw_dmac driver to an own directory

The dw_dmac driver is going to be split into multiple files. To make this more
convenient move it to an own directory.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

MAINTAINERS

@@ -6990,8 +6990,7 @@ SYNOPSYS DESIGNWARE DMAC DRIVER
 M:	Viresh Kumar <viresh.linux@gmail.com>
 S:	Maintained
 F:	include/linux/dw_dmac.h
-F:	drivers/dma/dw_dmac_regs.h
-F:	drivers/dma/dw_dmac.c
+F:	drivers/dma/dw/
 
 SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
 M:	Seungwon Jeon <tgih.jun@samsung.com>

drivers/dma/Kconfig

@@ -79,25 +79,7 @@ config INTEL_IOP_ADMA
 	help
 	  Enable support for the Intel(R) IOP Series RAID engines.
 
-config DW_DMAC
-	tristate "Synopsys DesignWare AHB DMA support"
-	depends on GENERIC_HARDIRQS
-	select DMA_ENGINE
-	default y if CPU_AT32AP7000
-	help
-	  Support the Synopsys DesignWare AHB DMA controller.  This
-	  can be integrated in chips such as the Atmel AT32ap7000.
-
-config DW_DMAC_BIG_ENDIAN_IO
-	bool "Use big endian I/O register access"
-	default y if AVR32
-	depends on DW_DMAC
-	help
-	  Say yes here to use big endian I/O access when reading and writing
-	  to the DMA controller registers. This is needed on some platforms,
-	  like the Atmel AVR32 architecture.
-
-	  If unsure, use the default setting.
+source "drivers/dma/dw/Kconfig"
 
 config AT_HDMAC
 	tristate "Atmel AHB DMA support"

drivers/dma/Makefile

@@ -15,7 +15,7 @@ obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
 obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_MV_XOR) += mv_xor.o
-obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_DW_DMAC) += dw/
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o

drivers/dma/dw/Kconfig

@@ -0,0 +1,23 @@
+#
+# DMA engine configuration for dw
+#
+
+config DW_DMAC
+	tristate "Synopsys DesignWare AHB DMA support"
+	depends on GENERIC_HARDIRQS
+	select DMA_ENGINE
+	default y if CPU_AT32AP7000
+	help
+	  Support the Synopsys DesignWare AHB DMA controller. This
+	  can be integrated in chips such as the Atmel AT32ap7000.
+
+config DW_DMAC_BIG_ENDIAN_IO
+	bool "Use big endian I/O register access"
+	default y if AVR32
+	depends on DW_DMAC
+	help
+	  Say yes here to use big endian I/O access when reading and writing
+	  to the DMA controller registers. This is needed on some platforms,
+	  like the Atmel AVR32 architecture.
+
+	  If unsure, use the default setting.

drivers/dma/dw/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_DW_DMAC) += dw_dmac.o

drivers/dma/dw_dmac.c → drivers/dma/dw/dw_dmac.c

@@ -28,8 +28,8 @@
 #include <linux/acpi.h>
 #include <linux/acpi_dma.h>
 
+#include "../dmaengine.h"
 #include "dw_dmac_regs.h"
-#include "dmaengine.h"
 
 /*
  * This supports the Synopsys "DesignWare AHB Central DMA Controller",