libertas: add access functions for mesh open/connect status

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/libertas/cmd.c

@@ -1304,7 +1304,7 @@ int lbs_execute_next_command(struct lbs_private *priv)
 		if ((priv->psmode != LBS802_11POWERMODECAM) &&
 		    (priv->psstate == PS_STATE_FULL_POWER) &&
 		    ((priv->connect_status == LBS_CONNECTED) ||
-		    (priv->mesh_connect_status == LBS_CONNECTED))) {
+		    lbs_mesh_connected(priv))) {
 			if (priv->secinfo.WPAenabled ||
 			    priv->secinfo.WPA2enabled) {
 				/* check for valid WPA group keys */

drivers/net/wireless/libertas/main.c

@@ -123,7 +123,7 @@ static ssize_t lbs_rtap_set(struct device *dev,
 		if (priv->monitormode == monitor_mode)
 			return strlen(buf);
 		if (!priv->monitormode) {
-			if (priv->infra_open || priv->mesh_open)
+			if (priv->infra_open || lbs_mesh_open(priv))
 				return -EBUSY;
 			if (priv->mode == IW_MODE_INFRA)
 				lbs_cmd_80211_deauthenticate(priv,
@@ -619,7 +619,7 @@ static int lbs_thread(void *data)
 				if (priv->connect_status == LBS_CONNECTED)
 					netif_wake_queue(priv->dev);
 				if (priv->mesh_dev &&
-				    priv->mesh_connect_status == LBS_CONNECTED)
+				    lbs_mesh_connected(priv))
 					netif_wake_queue(priv->mesh_dev);
 			}
 		}
@@ -833,7 +833,6 @@ static int lbs_init_adapter(struct lbs_private *priv)
 	memset(priv->current_addr, 0xff, ETH_ALEN);
 
 	priv->connect_status = LBS_DISCONNECTED;
-	priv->mesh_connect_status = LBS_DISCONNECTED;
 	priv->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
 	priv->mode = IW_MODE_INFRA;
 	priv->channel = DEFAULT_AD_HOC_CHANNEL;

drivers/net/wireless/libertas/mesh.c

@@ -1,4 +1,3 @@
-#include <linux/moduleparam.h>
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/netdevice.h>
@@ -196,6 +195,8 @@ int lbs_init_mesh(struct lbs_private *priv)
 
 	lbs_deb_enter(LBS_DEB_MESH);
 
+	priv->mesh_connect_status = LBS_DISCONNECTED;
+
 	/* Determine mesh_fw_ver from fwrelease and fwcapinfo */
 	/* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
 	/* 5.110.22 have mesh command with 0xa3 command id */

drivers/net/wireless/libertas/mesh.h

@@ -84,4 +84,10 @@ void lbs_mesh_ethtool_get_strings(struct net_device *dev,
 	uint32_t stringset, uint8_t *s);
 
 
+/* Accessors */
+
+#define lbs_mesh_open(priv) (priv->mesh_open)
+#define lbs_mesh_connected(priv) (priv->mesh_connect_status == LBS_CONNECTED)
+
+
 #endif

drivers/net/wireless/libertas/scan.c

@@ -640,7 +640,7 @@ out:
 		if (!priv->tx_pending_len)
 			netif_wake_queue(priv->dev);
 	}
-	if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED)) {
+	if (priv->mesh_dev && lbs_mesh_connected(priv)) {
 		netif_carrier_on(priv->mesh_dev);
 		if (!priv->tx_pending_len)
 			netif_wake_queue(priv->mesh_dev);

drivers/net/wireless/libertas/tx.c

@@ -198,7 +198,7 @@ void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count)
 	if (priv->connect_status == LBS_CONNECTED)
 		netif_wake_queue(priv->dev);
 
-	if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED))
+	if (priv->mesh_dev && lbs_mesh_connected(priv))
 		netif_wake_queue(priv->mesh_dev);
 }
 EXPORT_SYMBOL_GPL(lbs_send_tx_feedback);

drivers/net/wireless/libertas/wext.c

@@ -192,7 +192,7 @@ static void copy_active_data_rates(struct lbs_private *priv, u8 *rates)
 	lbs_deb_enter(LBS_DEB_WEXT);
 
 	if ((priv->connect_status != LBS_CONNECTED) &&
-		(priv->mesh_connect_status != LBS_CONNECTED))
+		!lbs_mesh_connected(priv))
 		memcpy(rates, lbs_bg_rates, MAX_RATES);
 	else
 		memcpy(rates, priv->curbssparams.rates, MAX_RATES);
@@ -307,7 +307,7 @@ static int mesh_get_nick(struct net_device *dev, struct iw_request_info *info,
 
 	/* Use nickname to indicate that mesh is on */
 
-	if (priv->mesh_connect_status == LBS_CONNECTED) {
+	if (lbs_mesh_connected(priv)) {
 		strncpy(extra, "Mesh", 12);
 		extra[12] = '\0';
 		dwrq->length = strlen(extra);
@@ -863,7 +863,7 @@ static struct iw_statistics *lbs_get_wireless_stats(struct net_device *dev)
 
 	/* If we're not associated, all quality values are meaningless */
 	if ((priv->connect_status != LBS_CONNECTED) &&
-	    (priv->mesh_connect_status != LBS_CONNECTED))
+	    !lbs_mesh_connected(priv))
 		goto out;
 
 	/* Quality by RSSI */