[ALSA] hda-codec - Revert volume knob controls in STAC codecs

Volume knob controls with STAC codecs seem to cause problems with some
devices.  Volumes change very slowly or silent suddenly.  It's likely
due to conflict between the software and the hardware volume knob
setup.
Since we'll have a virtual master control in future, it's safer to
remove this control completely right now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

sound/pci/hda/patch_sigmatel.c

@@ -111,7 +111,6 @@ struct sigmatel_spec {
 	unsigned int alt_switch: 1;
 	unsigned int hp_detect: 1;
 	unsigned int gpio_mute: 1;
-	unsigned int no_vol_knob :1;
 
 	unsigned int gpio_mask, gpio_data;
 
@@ -342,42 +341,6 @@ static int stac92xx_aloopback_put(struct snd_kcontrol *kcontrol,
 	return 1;
 }
 
-static int stac92xx_volknob_info(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_info *uinfo)
-{
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-	uinfo->count = 1;
-	uinfo->value.integer.min = 0;
-	uinfo->value.integer.max = 127;
-	return 0;
-}
-
-static int stac92xx_volknob_get(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	ucontrol->value.integer.value[0] = kcontrol->private_value & 0xff;
-	return 0;
-}
-
-static int stac92xx_volknob_put(struct snd_kcontrol *kcontrol,
-		struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	unsigned int val = kcontrol->private_value & 0xff;
-
-	if (val == ucontrol->value.integer.value[0])
-		return 0;
-
-	val = ucontrol->value.integer.value[0];
-	kcontrol->private_value &= ~0xff;
-	kcontrol->private_value |= val;
-
-	snd_hda_codec_write_cache(codec, kcontrol->private_value >> 16, 0,
-		AC_VERB_SET_VOLUME_KNOB_CONTROL, val | 0x80);
-	return 1;
-}
-
-
 static struct hda_verb stac9200_core_init[] = {
 	/* set dac0mux for dac converter */
 	{ 0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -446,18 +409,6 @@ static struct hda_verb stac9205_core_init[] = {
 		.private_value = verb_read | (verb_write << 16), \
 	}
 
-#define STAC_VOLKNOB(knob_nid)	\
-	{ \
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-		.name  = "Master Playback Volume", \
-		.count = 1, \
-		.info  = stac92xx_volknob_info, \
-		.get   = stac92xx_volknob_get, \
-		.put   = stac92xx_volknob_put, \
-			.private_value = 127 | (knob_nid << 16), \
-	}
-
-
 static struct snd_kcontrol_new stac9200_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
@@ -487,7 +438,6 @@ static struct snd_kcontrol_new stac9205_mixer[] = {
 	},
 	STAC_INPUT_SOURCE(2),
 	STAC_ANALOG_LOOPBACK(0xFE0, 0x7E0),
-	STAC_VOLKNOB(0x24),
 
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1d, 0x0, HDA_OUTPUT),
@@ -503,7 +453,6 @@ static struct snd_kcontrol_new stac9205_mixer[] = {
 /* This needs to be generated dynamically based on sequence */
 static struct snd_kcontrol_new stac922x_mixer[] = {
 	STAC_INPUT_SOURCE(2),
-	STAC_VOLKNOB(0x16),
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x17, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME_IDX("Mux Capture Volume", 0x0, 0x12, 0x0, HDA_OUTPUT),
@@ -517,7 +466,6 @@ static struct snd_kcontrol_new stac922x_mixer[] = {
 
 static struct snd_kcontrol_new stac927x_mixer[] = {
 	STAC_INPUT_SOURCE(3),
-	STAC_VOLKNOB(0x24),
 	STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB),
 
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x18, 0x0, HDA_INPUT),
@@ -1931,8 +1879,7 @@ static int stac92xx_auto_create_hp_ctls(struct hda_codec *codec,
 	}
 	if (spec->multiout.hp_nid) {
 		const char *pfx;
-		if (old_num_dacs == spec->multiout.num_dacs &&
-		    spec->no_vol_knob)
+		if (old_num_dacs == spec->multiout.num_dacs)
 			pfx = "Master";
 		else
 			pfx = "Headphone";
@@ -2489,7 +2436,6 @@ static int patch_stac9200(struct hda_codec *codec)
 	codec->spec = spec;
 	spec->num_pins = ARRAY_SIZE(stac9200_pin_nids);
 	spec->pin_nids = stac9200_pin_nids;
-	spec->no_vol_knob = 1;
 	spec->board_config = snd_hda_check_board_config(codec, STAC_9200_MODELS,
 							stac9200_models,
 							stac9200_cfg_tbl);
@@ -2544,7 +2490,6 @@ static int patch_stac925x(struct hda_codec *codec)
 	codec->spec = spec;
 	spec->num_pins = ARRAY_SIZE(stac925x_pin_nids);
 	spec->pin_nids = stac925x_pin_nids;
-	spec->no_vol_knob = 1;
 	spec->board_config = snd_hda_check_board_config(codec, STAC_925x_MODELS,
 							stac925x_models,
 							stac925x_cfg_tbl);