Ver código fonte

Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-agn.c
	drivers/net/wireless/iwlwifi/iwl3945-base.c
David S. Miller 16 anos atrás
pai
commit
5e30589521
100 arquivos alterados com 692 adições e 468 exclusões
  1. 3 1
      .mailmap
  2. 2 4
      Documentation/connector/cn_test.c
  3. 0 16
      Documentation/cpu-freq/user-guide.txt
  4. 12 1
      Documentation/filesystems/sysfs-pci.txt
  5. 4 3
      Documentation/kernel-doc-nano-HOWTO.txt
  6. 2 0
      Documentation/kernel-parameters.txt
  7. 20 3
      MAINTAINERS
  8. 1 1
      Makefile
  9. 2 2
      arch/alpha/include/asm/bug.h
  10. 2 2
      arch/arm/kernel/machine_kexec.c
  11. 10 8
      arch/arm/mach-pxa/dma.c
  12. 2 0
      arch/arm/mach-pxa/include/mach/regs-ac97.h
  13. 3 0
      arch/arm/mach-pxa/include/mach/regs-ssp.h
  14. 2 2
      arch/arm/mach-pxa/pxa300.c
  15. 1 1
      arch/arm/mach-pxa/pxa320.c
  16. 1 1
      arch/frv/mm/dma-alloc.c
  17. 1 1
      arch/ia64/sn/kernel/io_acpi_init.c
  18. 1 1
      arch/ia64/sn/kernel/io_init.c
  19. 1 0
      arch/mips/include/asm/spinlock.h
  20. 4 7
      arch/powerpc/boot/dts/mpc8313erdb.dts
  21. 1 1
      arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
  22. 3 2
      arch/powerpc/kernel/ftrace.c
  23. 15 2
      arch/powerpc/kernel/pci-common.c
  24. 2 0
      arch/powerpc/lib/sstep.c
  25. 2 2
      arch/powerpc/mm/fsl_booke_mmu.c
  26. 1 1
      arch/powerpc/mm/hash_low_32.S
  27. 2 2
      arch/powerpc/mm/pgtable_32.c
  28. 1 0
      arch/powerpc/oprofile/cell/spu_profiler.c
  29. 1 1
      arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
  30. 1 0
      arch/powerpc/platforms/pseries/hotplug-memory.c
  31. 1 1
      arch/powerpc/sysdev/cpm2_pic.c
  32. 1 1
      arch/powerpc/sysdev/ipic.c
  33. 60 27
      arch/s390/defconfig
  34. 2 2
      arch/s390/include/asm/lowcore.h
  35. 2 0
      arch/s390/kernel/irq.c
  36. 59 4
      arch/sh/boards/board-ap325rxa.c
  37. 20 7
      arch/sh/configs/ap325rxa_defconfig
  38. 33 9
      arch/sh/configs/migor_defconfig
  39. 9 12
      arch/sh/include/asm/mutex-llsc.h
  40. 3 19
      arch/sh/include/asm/syscall_32.h
  41. 3 19
      arch/sh/include/asm/syscall_64.h
  42. 1 1
      arch/sh/kernel/cpu/sh4/fpu.c
  43. 4 4
      arch/sh/kernel/setup.c
  44. 1 3
      arch/sh/kernel/signal_32.c
  45. 1 3
      arch/sh/kernel/signal_64.c
  46. 50 19
      arch/sh/lib/checksum.S
  47. 28 3
      arch/sparc/kernel/head_64.S
  48. 1 0
      arch/sparc/kernel/nmi.c
  49. 6 1
      arch/sparc/kernel/pcr.c
  50. 1 5
      arch/sparc/lib/GENbzero.S
  51. 2 6
      arch/sparc/lib/GENcopy_from_user.S
  52. 2 6
      arch/sparc/lib/GENcopy_to_user.S
  53. 2 7
      arch/sparc/lib/NG2copy_from_user.S
  54. 2 7
      arch/sparc/lib/NG2copy_to_user.S
  55. 1 5
      arch/sparc/lib/NGbzero.S
  56. 2 7
      arch/sparc/lib/NGcopy_from_user.S
  57. 2 7
      arch/sparc/lib/NGcopy_to_user.S
  58. 2 6
      arch/sparc/lib/U1copy_from_user.S
  59. 2 6
      arch/sparc/lib/U1copy_to_user.S
  60. 1 5
      arch/sparc/lib/U3copy_from_user.S
  61. 2 6
      arch/sparc/lib/U3copy_to_user.S
  62. 1 5
      arch/sparc/lib/bzero.S
  63. 17 44
      arch/sparc/lib/copy_in_user.S
  64. 11 0
      arch/x86/Kconfig
  65. 15 13
      arch/x86/Kconfig.cpu
  66. 5 3
      arch/x86/ia32/ia32entry.S
  67. 1 3
      arch/x86/include/asm/a.out-core.h
  68. 1 0
      arch/x86/include/asm/cpufeature.h
  69. 8 21
      arch/x86/include/asm/math_emu.h
  70. 6 0
      arch/x86/include/asm/mpspec.h
  71. 1 0
      arch/x86/include/asm/paravirt.h
  72. 20 6
      arch/x86/include/asm/pgtable.h
  73. 1 1
      arch/x86/include/asm/processor.h
  74. 1 0
      arch/x86/include/asm/spinlock.h
  75. 2 2
      arch/x86/include/asm/traps.h
  76. 1 1
      arch/x86/include/asm/xen/page.h
  77. 23 0
      arch/x86/kernel/acpi/boot.c
  78. 2 2
      arch/x86/kernel/acpi/sleep.c
  79. 1 1
      arch/x86/kernel/apic.c
  80. 0 11
      arch/x86/kernel/cpu/cpufreq/Kconfig
  81. 22 6
      arch/x86/kernel/cpu/cpufreq/powernow-k8.c
  82. 3 0
      arch/x86/kernel/cpu/intel.c
  83. 15 0
      arch/x86/kernel/cpu/intel_cacheinfo.c
  84. 1 0
      arch/x86/kernel/entry_64.S
  85. 9 8
      arch/x86/kernel/ftrace.c
  86. 10 2
      arch/x86/kernel/hpet.c
  87. 8 9
      arch/x86/kernel/i8237.c
  88. 18 7
      arch/x86/kernel/io_apic.c
  89. 0 12
      arch/x86/kernel/irqinit_32.c
  90. 6 0
      arch/x86/kernel/process.c
  91. 7 2
      arch/x86/kernel/process_64.c
  92. 1 1
      arch/x86/kernel/setup.c
  93. 9 6
      arch/x86/kernel/traps.c
  94. 11 0
      arch/x86/kernel/vmi_32.c
  95. 12 0
      arch/x86/mach-default/setup.c
  96. 11 1
      arch/x86/mach-voyager/setup.c
  97. 12 13
      arch/x86/mach-voyager/voyager_smp.c
  98. 3 3
      arch/x86/math-emu/fpu_entry.c
  99. 2 2
      arch/x86/math-emu/fpu_proto.h
  100. 6 10
      arch/x86/math-emu/fpu_system.h

+ 3 - 1
.mailmap

@@ -92,6 +92,7 @@ Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
 Sachin P Sant <ssant@in.ibm.com>
 Sam Ravnborg <sam@mars.ravnborg.org>
+Sascha Hauer <s.hauer@pengutronix.de>
 S.Çağlar Onur <caglar@pardus.org.tr>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
@@ -100,6 +101,7 @@ Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
-Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
+Uwe Kleine-König <ukl@pengutronix.de>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>

+ 2 - 4
Documentation/connector/cn_test.c

@@ -137,7 +137,7 @@ static void cn_test_timer_func(unsigned long __data)
 
 		memcpy(m + 1, data, m->len);
 
-		cn_netlink_send(m, 0, gfp_any());
+		cn_netlink_send(m, 0, GFP_ATOMIC);
 		kfree(m);
 	}
 
@@ -160,10 +160,8 @@ static int cn_test_init(void)
 		goto err_out;
 	}
 
-	init_timer(&cn_test_timer);
-	cn_test_timer.function = cn_test_timer_func;
+	setup_timer(&cn_test_timer, cn_test_timer_func, 0);
 	cn_test_timer.expires = jiffies + HZ;
-	cn_test_timer.data = 0;
 	add_timer(&cn_test_timer);
 
 	return 0;

+ 0 - 16
Documentation/cpu-freq/user-guide.txt

@@ -195,19 +195,3 @@ scaling_setspeed.		By "echoing" a new frequency into this
 				you can change the speed of the CPU,
 				but only within the limits of
 				scaling_min_freq and scaling_max_freq.
-				
-
-3.2 Deprecated Interfaces
--------------------------
-
-Depending on your kernel configuration, you might find the following 
-cpufreq-related files:
-/proc/cpufreq
-/proc/sys/cpu/*/speed
-/proc/sys/cpu/*/speed-min
-/proc/sys/cpu/*/speed-max
-
-These are files for deprecated interfaces to cpufreq, which offer far
-less functionality. Because of this, these interfaces aren't described
-here.
-

+ 12 - 1
Documentation/filesystems/sysfs-pci.txt

@@ -9,6 +9,7 @@ that support it.  For example, a given bus might look like this:
      |   |-- class
      |   |-- config
      |   |-- device
+     |   |-- enable
      |   |-- irq
      |   |-- local_cpus
      |   |-- resource
@@ -32,6 +33,7 @@ files, each with their own function.
        class		   PCI class (ascii, ro)
        config		   PCI config space (binary, rw)
        device		   PCI device (ascii, ro)
+       enable	           Whether the device is enabled (ascii, rw)
        irq		   IRQ number (ascii, ro)
        local_cpus	   nearby CPU mask (cpumask, ro)
        resource		   PCI resource host addresses (ascii, ro)
@@ -57,10 +59,19 @@ used to do actual device programming from userspace.  Note that some platforms
 don't support mmapping of certain resources, so be sure to check the return
 value from any attempted mmap.
 
+The 'enable' file provides a counter that indicates how many times the device 
+has been enabled.  If the 'enable' file currently returns '4', and a '1' is
+echoed into it, it will then return '5'.  Echoing a '0' into it will decrease
+the count.  Even when it returns to 0, though, some of the initialisation
+may not be reversed.  
+
 The 'rom' file is special in that it provides read-only access to the device's
 ROM file, if available.  It's disabled by default, however, so applications
 should write the string "1" to the file to enable it before attempting a read
-call, and disable it following the access by writing "0" to the file.
+call, and disable it following the access by writing "0" to the file.  Note
+that the device must be enabled for a rom read to return data succesfully.
+In the event a driver is not bound to the device, it can be enabled using the
+'enable' file, documented above.
 
 Accessing legacy resources through sysfs
 ----------------------------------------

+ 4 - 3
Documentation/kernel-doc-nano-HOWTO.txt

@@ -43,7 +43,8 @@ Only comments so marked will be considered by the kernel-doc scripts,
 and any comment so marked must be in kernel-doc format.  Do not use
 "/**" to be begin a comment block unless the comment block contains
 kernel-doc formatted comments.  The closing comment marker for
-kernel-doc comments can be either "*/" or "**/".
+kernel-doc comments can be either "*/" or "**/", but "*/" is
+preferred in the Linux kernel tree.
 
 Kernel-doc comments should be placed just before the function
 or data structure being described.
@@ -63,7 +64,7 @@ Example kernel-doc function comment:
  * comment lines.
  *
  * The longer description can have multiple paragraphs.
- **/
+ */
 
 The first line, with the short description, must be on a single line.
 
@@ -85,7 +86,7 @@ Example kernel-doc data structure comment.
  *		perhaps with more lines and words.
  *
  * Longer description of this structure.
- **/
+ */
 
 The kernel-doc function comments describe each parameter to the
 function, in order, with the @name lines.

+ 2 - 0
Documentation/kernel-parameters.txt

@@ -937,6 +937,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 
 	intel_iommu=	[DMAR] Intel IOMMU driver (DMAR) option
+		on
+			Enable intel iommu driver.
 		off
 			Disable intel iommu driver.
 		igfx_off [Default Off]

+ 20 - 3
MAINTAINERS

@@ -1021,6 +1021,14 @@ M:	mb@bu3sch.de
 W:	http://bu3sch.de/btgpio.php
 S:	Maintained
 
+BTRFS FILE SYSTEM
+P:	Chris Mason
+M:	chris.mason@oracle.com
+L:	linux-btrfs@vger.kernel.org
+W:	http://btrfs.wiki.kernel.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+S:	Maintained
+
 BTTV VIDEO4LINUX DRIVER
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org
@@ -1194,6 +1202,8 @@ S:	Supported
 CONTROL GROUPS (CGROUPS)
 P:	Paul Menage
 M:	menage@google.com
+P:	Li Zefan
+M:	lizf@cn.fujitsu.com
 L:	containers@lists.linux-foundation.org
 S:	Maintained
 
@@ -2212,7 +2222,7 @@ P:	Sean Hefty
 M:	sean.hefty@intel.com
 P:	Hal Rosenstock
 M:	hal.rosenstock@gmail.com
-L:	general@lists.openfabrics.org
+L:	general@lists.openfabrics.org (moderated for non-subscribers)
 W:	http://www.openib.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
 S:	Supported
@@ -3529,6 +3539,12 @@ S:	Maintained
 PXA MMCI DRIVER
 S:	Orphan
 
+PXA RTC DRIVER
+P:	Robert Jarzmik
+M:	robert.jarzmik@free.fr
+L:	rtc-linux@googlegroups.com
+S:	Maintained
+
 QLOGIC QLA2XXX FC-SCSI DRIVER
 P:	Andrew Vasquez
 M:	linux-driver@qlogic.com
@@ -4277,8 +4293,8 @@ P:	Rajiv Andrade
 M:	srajiv@linux.vnet.ibm.com
 W:	http://tpmdd.sourceforge.net
 P:	Marcel Selhorst
-M:	tpm@selhorst.net
-W:	http://www.prosec.rub.de/tpm/
+M:	m.selhorst@sirrix.com
+W:	http://www.sirrix.com
 L:	tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 
@@ -4841,6 +4857,7 @@ P:	Ingo Molnar
 M:	mingo@redhat.com
 P:	H. Peter Anvin
 M:	hpa@zytor.com
+M:	x86@kernel.org
 L:	linux-kernel@vger.kernel.org
 T:	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
 S:	Maintained

+ 1 - 1
Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*

+ 2 - 2
arch/alpha/include/asm/bug.h

@@ -8,12 +8,12 @@
 
 /* ??? Would be nice to use .gprel32 here, but we can't be sure that the
    function loaded the GP, so this could fail in modules.  */
-#define BUG()	{							\
+#define BUG()	do {							\
 	__asm__ __volatile__(						\
 		"call_pal %0  # bugchk\n\t"				\
 		".long %1\n\t.8byte %2"					\
 		: : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__));	\
-	for ( ; ; ); }
+	for ( ; ; ); } while (0)
 
 #define HAVE_ARCH_BUG
 #endif

+ 2 - 2
arch/arm/kernel/machine_kexec.c

@@ -13,8 +13,8 @@
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
 
-const extern unsigned char relocate_new_kernel[];
-const extern unsigned int relocate_new_kernel_size;
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned int relocate_new_kernel_size;
 
 extern void setup_mm_for_reboot(char mode);
 

+ 10 - 8
arch/arm/mach-pxa/dma.c

@@ -121,20 +121,22 @@ int __init pxa_init_dma(int num_ch)
 	if (dma_channels == NULL)
 		return -ENOMEM;
 
-	ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
-	if (ret) {
-		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		kfree(dma_channels);
-		return ret;
-	}
-
 	/* dma channel priorities on pxa2xx processors:
 	 * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
 	 * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
 	 * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
 	 */
-	for (i = 0; i < num_ch; i++)
+	for (i = 0; i < num_ch; i++) {
+		DCSR(i) = 0;
 		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+	}
+
+	ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+	if (ret) {
+		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
+		kfree(dma_channels);
+		return ret;
+	}
 
 	num_dma_channels = num_ch;
 	return 0;

+ 2 - 0
arch/arm/mach-pxa/include/mach/regs-ac97.h

@@ -1,6 +1,8 @@
 #ifndef __ASM_ARCH_REGS_AC97_H
 #define __ASM_ARCH_REGS_AC97_H
 
+#include <mach/hardware.h>
+
 /*
  * AC97 Controller registers
  */

+ 3 - 0
arch/arm/mach-pxa/include/mach/regs-ssp.h

@@ -41,6 +41,9 @@
 #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#endif
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
 #define SSCR0_NCS	(1 << 21)	/* Network clock select */
 #define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */

+ 2 - 2
arch/arm/mach-pxa/pxa300.c

@@ -88,13 +88,13 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
 
 static struct clk_lookup common_clkregs[] = {
-	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", "NANDCLK"),
+	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
 
 static struct clk_lookup pxa310_clkregs[] = {
-	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", "MMCCLK"),
+	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
 };
 
 static int __init pxa300_init(void)

+ 1 - 1
arch/arm/mach-pxa/pxa320.c

@@ -83,7 +83,7 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
 
 static struct clk_lookup pxa320_clkregs[] = {
-	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", "NANDCLK"),
+	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa320_init(void)

+ 1 - 1
arch/frv/mm/dma-alloc.c

@@ -36,10 +36,10 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/hardirq.h>
 
 #include <asm/pgalloc.h>
 #include <asm/io.h>
-#include <asm/hardirq.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/mmu.h>

+ 1 - 1
arch/ia64/sn/kernel/io_acpi_init.c

@@ -443,7 +443,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
 		size = pci_resource_len(dev, PCI_ROM_RESOURCE);
 		addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
 			       size);
-		image_size = pci_get_rom_size(addr, size);
+		image_size = pci_get_rom_size(dev, addr, size);
 		dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
 		dev->resource[PCI_ROM_RESOURCE].end =
 					(unsigned long) addr + image_size - 1;

+ 1 - 1
arch/ia64/sn/kernel/io_init.c

@@ -269,7 +269,7 @@ sn_io_slot_fixup(struct pci_dev *dev)
 
 			rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
 				      size + 1);
-			image_size = pci_get_rom_size(rom, size + 1);
+			image_size = pci_get_rom_size(dev, rom, size + 1);
 			dev->resource[PCI_ROM_RESOURCE].end =
 				dev->resource[PCI_ROM_RESOURCE].start +
 				image_size - 1;

+ 1 - 0
arch/mips/include/asm/spinlock.h

@@ -51,6 +51,7 @@ static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
 
 	return (((counters >> 14) - counters) & 0x1fff) > 1;
 }
+#define __raw_spin_is_contended	__raw_spin_is_contended
 
 static inline void __raw_spin_lock(raw_spinlock_t *lock)
 {

+ 4 - 7
arch/powerpc/boot/dts/mpc8313erdb.dts

@@ -191,7 +191,8 @@
 			interrupts = <37 0x8 36 0x8 35 0x8>;
 			interrupt-parent = <&ipic>;
 			tbi-handle = < &tbi0 >;
-			phy-handle = < &phy1 >;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
 			fsl,magic-packet;
 
 			mdio@24520 {
@@ -199,12 +200,6 @@
 				#size-cells = <0>;
 				compatible = "fsl,gianfar-mdio";
 				reg = <0x24520 0x20>;
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&ipic>;
-					interrupts = <19 0x8>;
-					reg = <0x1>;
-					device_type = "ethernet-phy";
-				};
 				phy4: ethernet-phy@4 {
 					interrupt-parent = <&ipic>;
 					interrupts = <20 0x8>;
@@ -219,6 +214,8 @@
 		};
 
 		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			cell-index = <1>;
 			device_type = "network";
 			model = "eTSEC";

+ 1 - 1
arch/powerpc/configs/83xx/mpc8313_rdb_defconfig

@@ -651,7 +651,7 @@ CONFIG_CICADA_PHY=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y

+ 3 - 2
arch/powerpc/kernel/ftrace.c

@@ -195,8 +195,9 @@ __ftrace_make_nop(struct module *mod,
 		return -EINVAL;
 	}
 
-	offset = (unsigned)((unsigned short)jmp[0]) << 16 |
-		(unsigned)((unsigned short)jmp[1]);
+	/* The bottom half is signed extended */
+	offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
+		(int)((short)jmp[1]);
 
 	DEBUGP(" %x ", offset);
 

+ 15 - 2
arch/powerpc/kernel/pci-common.c

@@ -561,8 +561,21 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus,
 		 (unsigned long long)(offset + size - 1));
 
 	if (mmap_state == pci_mmap_mem) {
-		if ((offset + size) > hose->isa_mem_size)
-			return -ENXIO;
+		/* Hack alert !
+		 *
+		 * Because X is lame and can fail starting if it gets an error trying
+		 * to mmap legacy_mem (instead of just moving on without legacy memory
+		 * access) we fake it here by giving it anonymous memory, effectively
+		 * behaving just like /dev/zero
+		 */
+		if ((offset + size) > hose->isa_mem_size) {
+			printk(KERN_DEBUG
+			       "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n",
+			       current->comm, current->pid, pci_domain_nr(bus), bus->number);
+			if (vma->vm_flags & VM_SHARED)
+				return shmem_zero_setup(vma);
+			return 0;
+		}
 		offset += hose->isa_mem_phys;
 	} else {
 		unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;

+ 2 - 0
arch/powerpc/lib/sstep.c

@@ -172,6 +172,8 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 			}
 			break;
 		case 0x378:	/* orx */
+			if (instr & 1)
+				break;
 			rs = (instr >> 21) & 0x1f;
 			rb = (instr >> 11) & 0x1f;
 			if (rs == rb) {		/* mr */

+ 2 - 2
arch/powerpc/mm/fsl_booke_mmu.c

@@ -73,7 +73,7 @@ extern unsigned int tlbcam_index;
 /*
  * Return PA for this VA if it is mapped by a CAM, or 0
  */
-unsigned long v_mapped_by_tlbcam(unsigned long va)
+phys_addr_t v_mapped_by_tlbcam(unsigned long va)
 {
 	int b;
 	for (b = 0; b < tlbcam_index; ++b)
@@ -85,7 +85,7 @@ unsigned long v_mapped_by_tlbcam(unsigned long va)
 /*
  * Return VA for a given PA or 0 if not mapped
  */
-unsigned long p_mapped_by_tlbcam(unsigned long pa)
+unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
 {
 	int b;
 	for (b = 0; b < tlbcam_index; ++b)

+ 1 - 1
arch/powerpc/mm/hash_low_32.S

@@ -320,7 +320,7 @@ _GLOBAL(create_hpte)
 	and	r8,r8,r0		/* writable if _RW & _DIRTY */
 	rlwimi	r5,r5,32-1,30,30	/* _PAGE_USER -> PP msb */
 	rlwimi	r5,r5,32-2,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r8,r8,0xe14		/* clear out reserved bits and M */
+	ori	r8,r8,0xe04		/* clear out reserved bits */
 	andc	r8,r5,r8		/* PP = user? (rw&dirty? 2: 3): 0 */
 BEGIN_FTR_SECTION
 	rlwinm	r8,r8,0,~_PAGE_COHERENT	/* clear M (coherence not required) */

+ 2 - 2
arch/powerpc/mm/pgtable_32.c

@@ -61,8 +61,8 @@ void setbat(int index, unsigned long virt, phys_addr_t phys,
 
 #ifdef HAVE_TLBCAM
 extern unsigned int tlbcam_index;
-extern unsigned long v_mapped_by_tlbcam(unsigned long va);
-extern unsigned long p_mapped_by_tlbcam(unsigned long pa);
+extern phys_addr_t v_mapped_by_tlbcam(unsigned long va);
+extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa);
 #else /* !HAVE_TLBCAM */
 #define v_mapped_by_tlbcam(x)	(0UL)
 #define p_mapped_by_tlbcam(x)	(0UL)

+ 1 - 0
arch/powerpc/oprofile/cell/spu_profiler.c

@@ -16,6 +16,7 @@
 #include <linux/smp.h>
 #include <linux/slab.h>
 #include <asm/cell-pmu.h>
+#include <asm/time.h>
 #include "pr_util.h"
 
 #define SCALE_SHIFT 14

+ 1 - 1
arch/powerpc/platforms/82xx/pq2ads-pci-pic.c

@@ -186,7 +186,7 @@ out_unmap_regs:
 	iounmap(priv->regs);
 out_free_bootmem:
 	free_bootmem((unsigned long)priv,
-	             sizeof(sizeof(struct pq2ads_pci_pic)));
+	             sizeof(struct pq2ads_pci_pic));
 	of_node_put(np);
 out_unmap_irq:
 	irq_dispose_mapping(irq);

+ 1 - 0
arch/powerpc/platforms/pseries/hotplug-memory.c

@@ -14,6 +14,7 @@
 #include <asm/firmware.h>
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
+#include <asm/sparsemem.h>
 
 static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 {

+ 1 - 1
arch/powerpc/sysdev/cpm2_pic.c

@@ -165,7 +165,7 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
 			edibit = (14 - (src - CPM2_IRQ_EXT1));
 	else
 		if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0)
-			edibit = (31 - (src - CPM2_IRQ_PORTC15));
+			edibit = (31 - (CPM2_IRQ_PORTC0 - src));
 		else
 			return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 : -EINVAL;
 

+ 1 - 1
arch/powerpc/sysdev/ipic.c

@@ -890,7 +890,7 @@ unsigned int ipic_get_irq(void)
 	return irq_linear_revmap(primary_ipic->irqhost, irq);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_SUSPEND
 static struct {
 	u32 sicfr;
 	u32 siprr[2];

+ 60 - 27
arch/s390/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Thu Nov 27 11:00:49 2008
+# Linux kernel version: 2.6.29-rc4
+# Wed Feb 11 10:07:16 2009
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -14,12 +14,14 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_BUG=y
 CONFIG_NO_IOMEM=y
 CONFIG_NO_DMA=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_PGSTE=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_S390=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -39,20 +41,29 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_FREEZER is not set
 # CONFIG_CGROUP_DEVICE is not set
 # CONFIG_CPUSETS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
@@ -63,6 +74,7 @@ CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,17 +103,17 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -109,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
@@ -130,7 +142,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -161,6 +172,7 @@ CONFIG_S390_EXEC_PROTECT=y
 CONFIG_MARCH_Z900=y
 # CONFIG_MARCH_Z990 is not set
 # CONFIG_MARCH_Z9_109 is not set
+# CONFIG_MARCH_Z10 is not set
 CONFIG_PACK_STACK=y
 # CONFIG_SMALL_STACK is not set
 CONFIG_CHECK_STACK=y
@@ -174,7 +186,6 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -195,7 +206,6 @@ CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -207,7 +217,6 @@ CONFIG_UNEVICTABLE_LRU=y
 #
 CONFIG_MACHCHK_WARNING=y
 CONFIG_QDIO=y
-# CONFIG_QDIO_DEBUG is not set
 CONFIG_CHSC_SCH=m
 
 #
@@ -227,15 +236,13 @@ CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
 # CONFIG_PAGE_STATES is not set
-CONFIG_VIRT_TIMER=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
 # CONFIG_APPLDATA_BASE is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_S390_HYPFS_FS=y
 CONFIG_KEXEC=y
 # CONFIG_ZFCPDUMP is not set
@@ -245,6 +252,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -383,6 +391,7 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 # CONFIG_NET_SCH_INGRESS is not set
 
 #
@@ -400,6 +409,7 @@ CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_CLS_CGROUP is not set
 # CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
@@ -411,6 +421,7 @@ CONFIG_NET_ACT_NAT=m
 # CONFIG_NET_ACT_SKBEDIT is not set
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -428,6 +439,7 @@ CONFIG_CAN_VCAN=m
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 # CONFIG_PCMCIA is not set
@@ -475,10 +487,14 @@ CONFIG_DASD_DIAG=y
 CONFIG_DASD_EER=y
 CONFIG_VIRTIO_BLK=m
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
 
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+
 #
 # SCSI device support
 #
@@ -520,6 +536,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ZFCP=y
 CONFIG_SCSI_DH=m
@@ -566,6 +583,10 @@ CONFIG_NET_ETHERNET=y
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 
 #
@@ -593,9 +614,11 @@ CONFIG_VIRTIO_NET=m
 #
 CONFIG_DEVKMEM=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IUCV=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=m
 CONFIG_HW_RANDOM_VIRTIO=m
@@ -645,7 +668,6 @@ CONFIG_S390_VMUR=m
 # CONFIG_NEW_LEDS is not set
 CONFIG_ACCESSIBILITY=y
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -668,6 +690,7 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -703,10 +726,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -715,6 +735,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -808,6 +829,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -818,15 +840,19 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
@@ -847,11 +873,17 @@ CONFIG_CRYPTO=y
 #
 CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -885,7 +917,7 @@ CONFIG_CRYPTO_HMAC=m
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -942,6 +974,7 @@ CONFIG_S390_PRNG=m
 # Library routines
 #
 CONFIG_BITREVERSE=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y

+ 2 - 2
arch/s390/include/asm/lowcore.h

@@ -384,8 +384,8 @@ struct _lowcore
         __u32        panic_magic;              /* 0xe00 */
 
 	/* Per cpu primary space access list */
-	__u8	     pad_0xe04[0xe3c-0xe04];   /* 0xe04 */
-	__u32	     vdso_per_cpu_data;	       /* 0xe3c */
+	__u8	     pad_0xe04[0xe38-0xe04];   /* 0xe04 */
+	__u64	     vdso_per_cpu_data;	       /* 0xe38 */
 	__u32	     paste[16];		       /* 0xe40 */
 
 	__u8	     pad13[0x11b8-0xe80];      /* 0xe80 */

+ 2 - 0
arch/s390/kernel/irq.c

@@ -95,6 +95,7 @@ asmlinkage void do_softirq(void)
 	local_irq_restore(flags);
 }
 
+#ifdef CONFIG_PROC_FS
 void init_irq_proc(void)
 {
 	struct proc_dir_entry *root_irq_dir;
@@ -102,3 +103,4 @@ void init_irq_proc(void)
 	root_irq_dir = proc_mkdir("irq", NULL);
 	create_prof_cpu_mask(root_irq_dir);
 }
+#endif

+ 59 - 4
arch/sh/boards/board-ap325rxa.c

@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
+#include <media/ov772x.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
@@ -216,7 +217,14 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static void camera_power(int val)
+{
+	gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */
+	mdelay(10);
+}
+
 #ifdef CONFIG_I2C
+/* support for the old ncm03j camera */
 static unsigned char camera_ncm03j_magic[] =
 {
 	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
@@ -237,6 +245,23 @@ static unsigned char camera_ncm03j_magic[] =
 	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
 };
 
+static int camera_probe(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret;
+
+	camera_power(1);
+	msg.addr = 0x6e;
+	msg.buf = camera_ncm03j_magic;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	camera_power(0);
+
+	return ret;
+}
+
 static int camera_set_capture(struct soc_camera_platform_info *info,
 			      int enable)
 {
@@ -245,9 +270,11 @@ static int camera_set_capture(struct soc_camera_platform_info *info,
 	int ret = 0;
 	int i;
 
+	camera_power(0);
 	if (!enable)
 		return 0; /* no disable for now */
 
+	camera_power(1);
 	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
 		u_int8_t buf[8];
 
@@ -286,8 +313,35 @@ static struct platform_device camera_device = {
 		.platform_data	= &camera_info,
 	},
 };
+
+static int __init camera_setup(void)
+{
+	if (camera_probe() > 0)
+		platform_device_register(&camera_device);
+
+	return 0;
+}
+late_initcall(camera_setup);
+
 #endif /* CONFIG_I2C */
 
+static int ov7725_power(struct device *dev, int mode)
+{
+	camera_power(0);
+	if (mode)
+		camera_power(1);
+
+	return 0;
+}
+
+static struct ov772x_camera_info ov7725_info = {
+	.buswidth  = SOCAM_DATAWIDTH_8,
+	.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+	.link = {
+		.power  = ov7725_power,
+	},
+};
+
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
 	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
@@ -338,9 +392,6 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 	&ap325rxa_nor_flash_device,
 	&lcdc_device,
 	&ceu_device,
-#ifdef CONFIG_I2C
-	&camera_device,
-#endif
 	&nand_flash_device,
 	&sdcard_cn3_device,
 };
@@ -349,6 +400,10 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
+	{
+		I2C_BOARD_INFO("ov772x", 0x21),
+		.platform_data = &ov7725_info,
+	},
 };
 
 static struct spi_board_info ap325rxa_spi_devices[] = {
@@ -426,7 +481,7 @@ static int __init ap325rxa_devices_setup(void)
 	gpio_request(GPIO_PTZ6, NULL);
 	gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
 	gpio_request(GPIO_PTZ5, NULL);
-	gpio_direction_output(GPIO_PTZ5, 1); /* RST_CAM */
+	gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
 	gpio_request(GPIO_PTZ4, NULL);
 	gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
 

+ 20 - 7
arch/sh/configs/ap325rxa_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan  9 16:54:19 2009
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 27 11:45:08 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -45,12 +45,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -378,6 +378,7 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -400,6 +401,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -447,9 +449,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xffffffff
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -479,6 +479,12 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_SH_FLCTL=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -607,6 +613,10 @@ CONFIG_SMSC911X=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -790,6 +800,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -837,7 +848,7 @@ CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9V022 is not set
 # CONFIG_SOC_CAMERA_TW9910 is not set
 CONFIG_SOC_CAMERA_PLATFORM=y
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -1012,6 +1023,7 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1060,6 +1072,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set

+ 33 - 9
arch/sh/configs/migor_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan  9 17:09:35 2009
+# Linux kernel version: 2.6.29-rc1
+# Thu Jan 22 09:16:16 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -45,8 +45,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+
+#
+# Control Group support
+#
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -389,6 +393,7 @@ CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -411,6 +416,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -458,9 +464,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xffffffff
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -487,6 +491,12 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -587,6 +597,10 @@ CONFIG_SMC91X=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -761,6 +775,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -806,9 +821,9 @@ CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M111 is not set
 # CONFIG_SOC_CAMERA_MT9T031 is not set
 # CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-CONFIG_SOC_CAMERA_PLATFORM=y
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_TW9910=y
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -866,11 +881,13 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
@@ -883,6 +900,11 @@ CONFIG_USB_G_SERIAL=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -961,6 +983,7 @@ CONFIG_UIO_PDRV_GENIRQ=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -1004,6 +1027,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set

+ 9 - 12
arch/sh/include/asm/mutex-llsc.h

@@ -21,38 +21,36 @@
 static inline void
 __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
 {
-	int __ex_flag, __res;
+	int __done, __res;
 
 	__asm__ __volatile__ (
 		"movli.l	@%2, %0	\n"
 		"add		#-1, %0	\n"
 		"movco.l	%0, @%2	\n"
 		"movt		%1	\n"
-		: "=&z" (__res), "=&r" (__ex_flag)
+		: "=&z" (__res), "=&r" (__done)
 		: "r" (&(count)->counter)
 		: "t");
 
-	__res |= !__ex_flag;
-	if (unlikely(__res != 0))
+	if (unlikely(!__done || __res != 0))
 		fail_fn(count);
 }
 
 static inline int
 __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
 {
-	int __ex_flag, __res;
+	int __done, __res;
 
 	__asm__ __volatile__ (
 		"movli.l	@%2, %0	\n"
 		"add		#-1, %0	\n"
 		"movco.l	%0, @%2	\n"
 		"movt		%1	\n"
-		: "=&z" (__res), "=&r" (__ex_flag)
+		: "=&z" (__res), "=&r" (__done)
 		: "r" (&(count)->counter)
 		: "t");
 
-	__res |= !__ex_flag;
-	if (unlikely(__res != 0))
+	if (unlikely(!__done || __res != 0))
 		__res = fail_fn(count);
 
 	return __res;
@@ -61,19 +59,18 @@ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
 static inline void
 __mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
 {
-	int __ex_flag, __res;
+	int __done, __res;
 
 	__asm__ __volatile__ (
 		"movli.l	@%2, %0	\n\t"
 		"add		#1, %0	\n\t"
 		"movco.l	%0, @%2 \n\t"
 		"movt		%1	\n\t"
-		: "=&z" (__res), "=&r" (__ex_flag)
+		: "=&z" (__res), "=&r" (__done)
 		: "r" (&(count)->counter)
 		: "t");
 
-	__res |= !__ex_flag;
-	if (unlikely(__res <= 0))
+	if (unlikely(!__done || __res <= 0))
 		fail_fn(count);
 }
 

+ 3 - 19
arch/sh/include/asm/syscall_32.h

@@ -21,23 +21,10 @@ static inline void syscall_rollback(struct task_struct *task,
 	 */
 }
 
-static inline bool syscall_has_error(struct pt_regs *regs)
-{
-	return (regs->sr & 0x1) ? true : false;
-}
-static inline void syscall_set_error(struct pt_regs *regs)
-{
-	regs->sr |= 0x1;
-}
-static inline void syscall_clear_error(struct pt_regs *regs)
-{
-	regs->sr &= ~0x1;
-}
-
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	return syscall_has_error(regs) ? regs->regs[0] : 0;
+	return IS_ERR_VALUE(regs->regs[0]) ? regs->regs[0] : 0;
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
@@ -50,13 +37,10 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-	if (error) {
-		syscall_set_error(regs);
+	if (error)
 		regs->regs[0] = -error;
-	} else {
-		syscall_clear_error(regs);
+	else
 		regs->regs[0] = val;
-	}
 }
 
 static inline void syscall_get_arguments(struct task_struct *task,

+ 3 - 19
arch/sh/include/asm/syscall_64.h

@@ -21,23 +21,10 @@ static inline void syscall_rollback(struct task_struct *task,
 	 */
 }
 
-static inline bool syscall_has_error(struct pt_regs *regs)
-{
-	return (regs->sr & 0x1) ? true : false;
-}
-static inline void syscall_set_error(struct pt_regs *regs)
-{
-	regs->sr |= 0x1;
-}
-static inline void syscall_clear_error(struct pt_regs *regs)
-{
-	regs->sr &= ~0x1;
-}
-
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	return syscall_has_error(regs) ? regs->regs[9] : 0;
+	return IS_ERR_VALUE(regs->regs[9]) ? regs->regs[9] : 0;
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
@@ -50,13 +37,10 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-	if (error) {
-		syscall_set_error(regs);
+	if (error)
 		regs->regs[9] = -error;
-	} else {
-		syscall_clear_error(regs);
+	else
 		regs->regs[9] = val;
-	}
 }
 
 static inline void syscall_get_arguments(struct task_struct *task,

+ 1 - 1
arch/sh/kernel/cpu/sh4/fpu.c

@@ -423,7 +423,7 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 		int m;
 		unsigned int hx;
 
-		m = (finsn >> 9) & 0x7;
+		m = (finsn >> 8) & 0x7;
 		hx = tsk->thread.fpu.hard.fp_regs[m];
 
 		if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)

+ 4 - 4
arch/sh/kernel/setup.c

@@ -262,11 +262,11 @@ void __init setup_bootmem_allocator(unsigned long free_pfn)
 			BOOTMEM_DEFAULT);
 
 	/*
-	 * reserve physical page 0 - it's a special BIOS page on many boxes,
-	 * enabling clean reboots, SMP operation, laptop functions.
+	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
 	 */
-	reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
-			BOOTMEM_DEFAULT);
+	if (CONFIG_ZERO_PAGE_OFFSET != 0)
+		reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
+				BOOTMEM_DEFAULT);
 
 	sparse_memory_present_with_active_regions(0);
 

+ 1 - 3
arch/sh/kernel/signal_32.c

@@ -510,7 +510,6 @@ handle_syscall_restart(unsigned long save_r0, struct pt_regs *regs,
 		case -ERESTARTNOHAND:
 		no_system_call_restart:
 			regs->regs[0] = -EINTR;
-			regs->sr |= 1;
 			break;
 
 		case -ERESTARTSYS:
@@ -589,8 +588,7 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		if (regs->sr & 1)
-			handle_syscall_restart(save_r0, regs, &ka.sa);
+		handle_syscall_restart(save_r0, regs, &ka.sa);
 
 		/* Whee!  Actually deliver the signal.  */
 		if (handle_signal(signr, &ka, &info, oldset,

+ 1 - 3
arch/sh/kernel/signal_64.c

@@ -60,7 +60,6 @@ handle_syscall_restart(struct pt_regs *regs, struct sigaction *sa)
 		case -ERESTARTNOHAND:
 		no_system_call_restart:
 			regs->regs[REG_RET] = -EINTR;
-			regs->sr |= 1;
 			break;
 
 		case -ERESTARTSYS:
@@ -109,8 +108,7 @@ static int do_signal(struct pt_regs *regs, sigset_t *oldset)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, 0);
 	if (signr > 0) {
-		if (regs->sr & 1)
-			handle_syscall_restart(regs, &ka.sa);
+		handle_syscall_restart(regs, &ka.sa);
 
 		/* Whee!  Actually deliver the signal.  */
 		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {

+ 50 - 19
arch/sh/lib/checksum.S

@@ -36,8 +36,7 @@
  */
 
 /*	
- * unsigned int csum_partial(const unsigned char *buf, int len,
- *                           unsigned int sum);
+ * asmlinkage __wsum csum_partial(const void *buf, int len, __wsum sum);
  */
 
 .text
@@ -49,11 +48,31 @@ ENTRY(csum_partial)
 	   * Fortunately, it is easy to convert 2-byte alignment to 4-byte
 	   * alignment for the unrolled loop.
 	   */
-	mov	r5, r1
 	mov	r4, r0
-	tst	#2, r0		! Check alignment.
-	bt	2f		! Jump if alignment is ok.
+	tst	#3, r0		! Check alignment.
+	bt/s	2f		! Jump if alignment is ok.
+	 mov	r4, r7		! Keep a copy to check for alignment
 	!
+	tst	#1, r0		! Check alignment.
+	bt	21f		! Jump if alignment is boundary of 2bytes.
+
+	! buf is odd
+	tst	r5, r5
+	add	#-1, r5
+	bt	9f
+	mov.b	@r4+, r0
+	extu.b	r0, r0
+	addc	r0, r6		! t=0 from previous tst
+	mov	r6, r0
+	shll8	r6
+	shlr16	r0
+	shlr8	r0
+	or	r0, r6
+	mov	r4, r0
+	tst	#2, r0
+	bt	2f
+21:
+	! buf is 2 byte aligned (len could be 0)
 	add	#-2, r5		! Alignment uses up two bytes.
 	cmp/pz	r5		!
 	bt/s	1f		! Jump if we had at least two bytes.
@@ -61,16 +80,17 @@ ENTRY(csum_partial)
 	bra	6f
 	 add	#2, r5		! r5 was < 2.  Deal with it.
 1:
-	mov	r5, r1		! Save new len for later use.
 	mov.w	@r4+, r0
 	extu.w	r0, r0
 	addc	r0, r6
 	bf	2f
 	add	#1, r6
 2:
+	! buf is 4 byte aligned (len could be 0)
+	mov	r5, r1
 	mov	#-5, r0
-	shld	r0, r5
-	tst	r5, r5
+	shld	r0, r1
+	tst	r1, r1
 	bt/s	4f		! if it's =0, go to 4f
 	 clrt
 	.align	2
@@ -92,30 +112,31 @@ ENTRY(csum_partial)
 	addc	r0, r6
 	addc	r2, r6
 	movt	r0
-	dt	r5
+	dt	r1
 	bf/s	3b
 	 cmp/eq	#1, r0
-	! here, we know r5==0
-	addc	r5, r6			! add carry to r6
+	! here, we know r1==0
+	addc	r1, r6			! add carry to r6
 4:
-	mov	r1, r0
+	mov	r5, r0
 	and	#0x1c, r0
 	tst	r0, r0
-	bt/s	6f
-	 mov	r0, r5
-	shlr2	r5
+	bt	6f
+	! 4 bytes or more remaining
+	mov	r0, r1
+	shlr2	r1
 	mov	#0, r2
 5:
 	addc	r2, r6
 	mov.l	@r4+, r2
 	movt	r0
-	dt	r5
+	dt	r1
 	bf/s	5b
 	 cmp/eq	#1, r0
 	addc	r2, r6
-	addc	r5, r6		! r5==0 here, so it means add carry-bit
+	addc	r1, r6		! r1==0 here, so it means add carry-bit
 6:
-	mov	r1, r5
+	! 3 bytes or less remaining
 	mov	#3, r0
 	and	r0, r5
 	tst	r5, r5
@@ -139,8 +160,18 @@ ENTRY(csum_partial)
 8:
 	addc	r0, r6
 	mov	#0, r0
-	addc	r0, r6 
+	addc	r0, r6
 9:
+	! Check if the buffer was misaligned, if so realign sum
+	mov	r7, r0
+	tst	#1, r0
+	bt	10f
+	mov	r6, r0
+	shll8	r6
+	shlr16	r0
+	shlr8	r0
+	or	r0, r6
+10:
 	rts
 	 mov	r6, r0
 

+ 28 - 3
arch/sparc/kernel/head_64.S

@@ -891,10 +891,35 @@ prom_tba:	.xword	0
 tlb_type:	.word	0	/* Must NOT end up in BSS */
 	.section	".fixup",#alloc,#execinstr
 
-	.globl	__ret_efault, __retl_efault
-__ret_efault:
+	.globl	__ret_efault, __retl_efault, __ret_one, __retl_one
+ENTRY(__ret_efault)
 	ret
 	 restore %g0, -EFAULT, %o0
-__retl_efault:
+ENDPROC(__ret_efault)
+
+ENTRY(__retl_efault)
 	retl
 	 mov	-EFAULT, %o0
+ENDPROC(__retl_efault)
+
+ENTRY(__retl_one)
+	retl
+	 mov	1, %o0
+ENDPROC(__retl_one)
+
+ENTRY(__ret_one_asi)
+	wr	%g0, ASI_AIUS, %asi
+	ret
+	 restore %g0, 1, %o0
+ENDPROC(__ret_one_asi)
+
+ENTRY(__retl_one_asi)
+	wr	%g0, ASI_AIUS, %asi
+	retl
+	 mov	1, %o0
+ENDPROC(__retl_one_asi)
+
+ENTRY(__retl_o1)
+	retl
+	 mov	%o1, %o0
+ENDPROC(__retl_o1)

+ 1 - 0
arch/sparc/kernel/nmi.c

@@ -70,6 +70,7 @@ static void die_nmi(const char *str, struct pt_regs *regs, int do_panic)
 	printk(" on CPU%d, ip %08lx, registers:\n",
 	       smp_processor_id(), regs->tpc);
 	show_regs(regs);
+	dump_stack();
 
 	bust_spinlocks(0);
 

+ 6 - 1
arch/sparc/kernel/pcr.c

@@ -133,11 +133,16 @@ int __init pcr_arch_init(void)
 
 	case cheetah:
 	case cheetah_plus:
-	case spitfire:
 		pcr_ops = &direct_pcr_ops;
 		pcr_enable = PCR_SUN4U_ENABLE;
 		break;
 
+	case spitfire:
+		/* UltraSPARC-I/II and derivatives lack a profile
+		 * counter overflow interrupt so we can't make use of
+		 * their hardware currently.
+		 */
+		/* fallthrough */
 	default:
 		err = -ENODEV;
 		goto out_unregister;

+ 1 - 5
arch/sparc/lib/GENbzero.S

@@ -6,13 +6,9 @@
 
 #define EX_ST(x,y)		\
 98:	x,y;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov	%o1, %o0;	\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_o1;	\
 	.text;			\
 	.align 4;
 

+ 2 - 6
arch/sparc/lib/GENcopy_from_user.S

@@ -5,13 +5,9 @@
 
 #define EX_LD(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov	1, %o0;		\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_one;	\
 	.text;			\
 	.align 4;
 
@@ -27,7 +23,7 @@
 #define PREAMBLE					\
 	rd		%asi, %g1;			\
 	cmp		%g1, ASI_AIUS;			\
-	bne,pn		%icc, memcpy_user_stub;		\
+	bne,pn		%icc, ___copy_in_user;		\
 	 nop
 #endif
 

+ 2 - 6
arch/sparc/lib/GENcopy_to_user.S

@@ -5,13 +5,9 @@
 
 #define EX_ST(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov	1, %o0;		\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_one;	\
 	.text;			\
 	.align 4;
 
@@ -31,7 +27,7 @@
 #define PREAMBLE					\
 	rd		%asi, %g1;			\
 	cmp		%g1, ASI_AIUS;			\
-	bne,pn		%icc, memcpy_user_stub;		\
+	bne,pn		%icc, ___copy_in_user;		\
 	 nop
 #endif
 

+ 2 - 7
arch/sparc/lib/NG2copy_from_user.S

@@ -5,14 +5,9 @@
 
 #define EX_LD(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	wr	%g0, ASI_AIUS, %asi;\
-	retl;			\
-	 mov	1, %o0;		\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_one_asi;\
 	.text;			\
 	.align 4;
 
@@ -33,7 +28,7 @@
 #define PREAMBLE					\
 	rd		%asi, %g1;			\
 	cmp		%g1, ASI_AIUS;			\
-	bne,pn		%icc, memcpy_user_stub;		\
+	bne,pn		%icc, ___copy_in_user;		\
 	 nop
 #endif
 

+ 2 - 7
arch/sparc/lib/NG2copy_to_user.S

@@ -5,14 +5,9 @@
 
 #define EX_ST(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	wr	%g0, ASI_AIUS, %asi;\
-	retl;			\
-	 mov	1, %o0;		\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_one_asi;\
 	.text;			\
 	.align 4;
 
@@ -42,7 +37,7 @@
 #define PREAMBLE					\
 	rd		%asi, %g1;			\
 	cmp		%g1, ASI_AIUS;			\
-	bne,pn		%icc, memcpy_user_stub;		\
+	bne,pn		%icc, ___copy_in_user;		\
 	 nop
 #endif
 

+ 1 - 5
arch/sparc/lib/NGbzero.S

@@ -6,13 +6,9 @@
 
 #define EX_ST(x,y)		\
 98:	x,y;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov	%o1, %o0;	\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_o1;	\
 	.text;			\
 	.align 4;
 

+ 2 - 7
arch/sparc/lib/NGcopy_from_user.S

@@ -5,14 +5,9 @@
 
 #define EX_LD(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	wr	%g0, ASI_AIUS, %asi;\
-	ret;			\
-	 restore %g0, 1, %o0;	\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __ret_one_asi;\
 	.text;			\
 	.align 4;
 
@@ -30,7 +25,7 @@
 #define PREAMBLE					\
 	rd		%asi, %g1;			\
 	cmp		%g1, ASI_AIUS;			\
-	bne,pn		%icc, memcpy_user_stub;		\
+	bne,pn		%icc, ___copy_in_user;		\
 	 nop
 #endif
 

+ 2 - 7
arch/sparc/lib/NGcopy_to_user.S

@@ -5,14 +5,9 @@
 
 #define EX_ST(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	wr	%g0, ASI_AIUS, %asi;\
-	ret;			\
-	 restore %g0, 1, %o0;	\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __ret_one_asi;\
 	.text;			\
 	.align 4;
 
@@ -33,7 +28,7 @@
 #define PREAMBLE					\
 	rd		%asi, %g1;			\
 	cmp		%g1, ASI_AIUS;			\
-	bne,pn		%icc, memcpy_user_stub;		\
+	bne,pn		%icc, ___copy_in_user;		\
 	 nop
 #endif
 

+ 2 - 6
arch/sparc/lib/U1copy_from_user.S

@@ -5,13 +5,9 @@
 
 #define EX_LD(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov	1, %o0;		\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_one;	\
 	.text;			\
 	.align 4;
 
@@ -27,7 +23,7 @@
 #define PREAMBLE					\
 	rd		%asi, %g1;			\
 	cmp		%g1, ASI_AIUS;			\
-	bne,pn		%icc, memcpy_user_stub;		\
+	bne,pn		%icc, ___copy_in_user;		\
 	 nop;						\
 
 #include "U1memcpy.S"

+ 2 - 6
arch/sparc/lib/U1copy_to_user.S

@@ -5,13 +5,9 @@
 
 #define EX_ST(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov	1, %o0;		\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_one;	\
 	.text;			\
 	.align 4;
 
@@ -27,7 +23,7 @@
 #define PREAMBLE					\
 	rd		%asi, %g1;			\
 	cmp		%g1, ASI_AIUS;			\
-	bne,pn		%icc, memcpy_user_stub;		\
+	bne,pn		%icc, ___copy_in_user;		\
 	 nop;						\
 
 #include "U1memcpy.S"

+ 1 - 5
arch/sparc/lib/U3copy_from_user.S

@@ -5,13 +5,9 @@
 
 #define EX_LD(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov	1, %o0;		\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_one;	\
 	.text;			\
 	.align 4;
 

+ 2 - 6
arch/sparc/lib/U3copy_to_user.S

@@ -5,13 +5,9 @@
 
 #define EX_ST(x)		\
 98:	x;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov	1, %o0;		\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_one;	\
 	.text;			\
 	.align 4;
 
@@ -27,7 +23,7 @@
 #define PREAMBLE					\
 	rd		%asi, %g1;			\
 	cmp		%g1, ASI_AIUS;			\
-	bne,pn		%icc, memcpy_user_stub;		\
+	bne,pn		%icc, ___copy_in_user;		\
 	 nop;						\
 
 #include "U3memcpy.S"

+ 1 - 5
arch/sparc/lib/bzero.S

@@ -88,13 +88,9 @@ __bzero_done:
 
 #define EX_ST(x,y)		\
 98:	x,y;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov	%o1, %o0;	\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_o1;	\
 	.text;			\
 	.align 4;
 

+ 17 - 44
arch/sparc/lib/copy_in_user.S

@@ -3,19 +3,16 @@
  * Copyright (C) 1999, 2000, 2004 David S. Miller (davem@redhat.com)
  */
 
+#include <linux/linkage.h>
 #include <asm/asi.h>
 
 #define XCC xcc
 
 #define EX(x,y)			\
 98:	x,y;			\
-	.section .fixup;	\
-	.align 4;		\
-99:	retl;			\
-	 mov 1, %o0;		\
 	.section __ex_table,"a";\
 	.align 4;		\
-	.word 98b, 99b;		\
+	.word 98b, __retl_one;	\
 	.text;			\
 	.align 4;
 
@@ -31,18 +28,7 @@
 	 * to copy register windows around during thread cloning.
 	 */
 
-	.globl		___copy_in_user
-	.type		___copy_in_user,#function
-___copy_in_user:	/* %o0=dst, %o1=src, %o2=len */
-	/* Writing to %asi is _expensive_ so we hardcode it.
-	 * Reading %asi to check for KERNEL_DS is comparatively
-	 * cheap.
-	 */
-	rd		%asi, %g1
-	cmp		%g1, ASI_AIUS
-	bne,pn		%icc, memcpy_user_stub
-	 nop
-
+ENTRY(___copy_in_user)	/* %o0=dst, %o1=src, %o2=len */
 	cmp		%o2, 0
 	be,pn		%XCC, 85f
 	 or		%o0, %o1, %o3
@@ -53,22 +39,24 @@ ___copy_in_user:	/* %o0=dst, %o1=src, %o2=len */
 	/* 16 < len <= 64 */
 	andcc		%o3, 0x7, %g0
 	bne,pn		%XCC, 90f
-	 sub		%o0, %o1, %o3
+	 nop
 
 	andn		%o2, 0x7, %o4
 	and		%o2, 0x7, %o2
 1:	subcc		%o4, 0x8, %o4
 	EX(ldxa [%o1] %asi, %o5)
-	EX(stxa %o5, [%o1 + %o3] ASI_AIUS)
+	EX(stxa %o5, [%o0] %asi)
+	add		%o1, 0x8, %o1
 	bgu,pt		%XCC, 1b
-	 add		%o1, 0x8, %o1
+	 add		%o0, 0x8, %o0
 	andcc		%o2, 0x4, %g0
 	be,pt		%XCC, 1f
 	 nop
 	sub		%o2, 0x4, %o2
 	EX(lduwa [%o1] %asi, %o5)
-	EX(stwa %o5, [%o1 + %o3] ASI_AIUS)
+	EX(stwa %o5, [%o0] %asi)
 	add		%o1, 0x4, %o1
+	add		%o0, 0x4, %o0
 1:	cmp		%o2, 0
 	be,pt		%XCC, 85f
 	 nop
@@ -78,14 +66,15 @@ ___copy_in_user:	/* %o0=dst, %o1=src, %o2=len */
 80:	/* 0 < len <= 16 */
 	andcc		%o3, 0x3, %g0
 	bne,pn		%XCC, 90f
-	 sub		%o0, %o1, %o3
+	 nop
 
 82:
 	subcc		%o2, 4, %o2
 	EX(lduwa [%o1] %asi, %g1)
-	EX(stwa %g1, [%o1 + %o3] ASI_AIUS)
+	EX(stwa %g1, [%o0] %asi)
+	add		%o1, 4, %o1
 	bgu,pt		%XCC, 82b
-	 add		%o1, 4, %o1
+	 add		%o0, 4, %o0
 
 85:	retl
 	 clr		%o0
@@ -94,26 +83,10 @@ ___copy_in_user:	/* %o0=dst, %o1=src, %o2=len */
 90:
 	subcc		%o2, 1, %o2
 	EX(lduba [%o1] %asi, %g1)
-	EX(stba %g1, [%o1 + %o3] ASI_AIUS)
+	EX(stba %g1, [%o0] %asi)
+	add		%o1, 1, %o1
 	bgu,pt		%XCC, 90b
-	 add		%o1, 1, %o1
+	 add		%o0, 1, %o0
 	retl
 	 clr		%o0
-
-	.size		___copy_in_user, .-___copy_in_user
-
-	/* Act like copy_{to,in}_user(), ie. return zero instead
-	 * of original destination pointer.  This is invoked when
-	 * copy_{to,in}_user() finds that %asi is kernel space.
-	 */
-	.globl		memcpy_user_stub
-	.type		memcpy_user_stub,#function
-memcpy_user_stub:
-	save		%sp, -192, %sp
-	mov		%i0, %o0
-	mov		%i1, %o1
-	call		memcpy
-	 mov		%i2, %o2
-	ret
-	 restore	%g0, %g0, %o0
-	.size		memcpy_user_stub, .-memcpy_user_stub
+ENDPROC(___copy_in_user)

+ 11 - 0
arch/x86/Kconfig

@@ -1802,6 +1802,17 @@ config DMAR
 	  and include PCI device scope covered by these DMA
 	  remapping devices.
 
+config DMAR_DEFAULT_ON
+	def_bool n
+	prompt "Enable DMA Remapping Devices by default"
+	depends on DMAR
+	help
+	  Selecting this option will enable a DMAR device at boot time if
+	  one is found. If this option is not selected, DMAR support can
+	  be enabled by passing intel_iommu=on to the kernel. It is
+	  recommended you say N here while the DMAR code remains
+	  experimental.
+
 config DMAR_GFX_WA
 	def_bool y
 	prompt "Support for Graphics workaround"

+ 15 - 13
arch/x86/Kconfig.cpu

@@ -167,9 +167,9 @@ config MK7
 config MK8
 	bool "Opteron/Athlon64/Hammer/K8"
 	help
-	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
-	  use of some extended instructions, and passes appropriate optimization
-	  flags to GCC.
+	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.
+	  Enables use of some extended instructions, and passes appropriate
+	  optimization flags to GCC.
 
 config MCRUSOE
 	bool "Crusoe"
@@ -256,9 +256,11 @@ config MPSC
 config MCORE2
 	bool "Core 2/newer Xeon"
 	help
-	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
-	  CPUs. You can distinguish newer from older Xeons by the CPU family
-	  in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
+
+	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
+	  53xx) CPUs. You can distinguish newer from older Xeons by the CPU
+	  family in /proc/cpuinfo. Newer ones have 6 and older ones 15
+	  (not a typo)
 
 config GENERIC_CPU
 	bool "Generic-x86-64"
@@ -320,14 +322,14 @@ config X86_PPRO_FENCE
 	bool "PentiumPro memory ordering errata workaround"
 	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
 	help
-	  Old PentiumPro multiprocessor systems had errata that could cause memory
-	  operations to violate the x86 ordering standard in rare cases. Enabling this
-	  option will attempt to work around some (but not all) occurances of
-	  this problem, at the cost of much heavier spinlock and memory barrier
-	  operations.
+	  Old PentiumPro multiprocessor systems had errata that could cause
+	  memory operations to violate the x86 ordering standard in rare cases.
+	  Enabling this option will attempt to work around some (but not all)
+	  occurances of this problem, at the cost of much heavier spinlock and
+	  memory barrier operations.
 
-	  If unsure, say n here. Even distro kernels should think twice before enabling
-	  this: there are few systems, and an unlikely bug.
+	  If unsure, say n here. Even distro kernels should think twice before
+	  enabling this: there are few systems, and an unlikely bug.
 
 config X86_F00F_BUG
 	def_bool y

+ 5 - 3
arch/x86/ia32/ia32entry.S

@@ -418,9 +418,9 @@ ENTRY(ia32_syscall)
 	orl   $TS_COMPAT,TI_status(%r10)
 	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	jnz ia32_tracesys
-ia32_do_syscall:	
 	cmpl $(IA32_NR_syscalls-1),%eax
-	ja  int_ret_from_sys_call	/* ia32_tracesys has set RAX(%rsp) */
+	ja ia32_badsys
+ia32_do_call:
 	IA32_ARG_FIXUP
 	call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
 ia32_sysret:
@@ -435,7 +435,9 @@ ia32_tracesys:
 	call syscall_trace_enter
 	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
-	jmp ia32_do_syscall
+	cmpl $(IA32_NR_syscalls-1),%eax
+	ja  int_ret_from_sys_call	/* ia32_tracesys has set RAX(%rsp) */
+	jmp ia32_do_call
 END(ia32_syscall)
 
 ia32_badsys:

+ 1 - 3
arch/x86/include/asm/a.out-core.h

@@ -23,8 +23,6 @@
  */
 static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
 {
-	u16 gs;
-
 /* changed the size calculations - should hopefully work better. lbt */
 	dump->magic = CMAGIC;
 	dump->start_code = 0;
@@ -57,7 +55,7 @@ static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
 	dump->regs.ds = (u16)regs->ds;
 	dump->regs.es = (u16)regs->es;
 	dump->regs.fs = (u16)regs->fs;
-	savesegment(gs, gs);
+	savesegment(gs, dump->regs.gs);
 	dump->regs.orig_ax = regs->orig_ax;
 	dump->regs.ip = regs->ip;
 	dump->regs.cs = (u16)regs->cs;

+ 1 - 0
arch/x86/include/asm/cpufeature.h

@@ -93,6 +93,7 @@
 #define X86_FEATURE_XTOPOLOGY	(3*32+22) /* cpu topology enum extensions */
 #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
 #define X86_FEATURE_NONSTOP_TSC	(3*32+24) /* TSC does not stop in C states */
+#define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */

+ 8 - 21
arch/x86/include/asm/math_emu.h

@@ -1,31 +1,18 @@
 #ifndef _ASM_X86_MATH_EMU_H
 #define _ASM_X86_MATH_EMU_H
 
+#include <asm/ptrace.h>
+#include <asm/vm86.h>
+
 /* This structure matches the layout of the data saved to the stack
    following a device-not-present interrupt, part of it saved
    automatically by the 80386/80486.
    */
-struct info {
+struct math_emu_info {
 	long ___orig_eip;
-	long ___ebx;
-	long ___ecx;
-	long ___edx;
-	long ___esi;
-	long ___edi;
-	long ___ebp;
-	long ___eax;
-	long ___ds;
-	long ___es;
-	long ___fs;
-	long ___orig_eax;
-	long ___eip;
-	long ___cs;
-	long ___eflags;
-	long ___esp;
-	long ___ss;
-	long ___vm86_es; /* This and the following only in vm86 mode */
-	long ___vm86_ds;
-	long ___vm86_fs;
-	long ___vm86_gs;
+	union {
+		struct pt_regs *regs;
+		struct kernel_vm86_regs *vm86;
+	};
 };
 #endif /* _ASM_X86_MATH_EMU_H */

+ 6 - 0
arch/x86/include/asm/mpspec.h

@@ -60,6 +60,7 @@ extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
 				   u32 gsi);
 extern void mp_config_acpi_legacy_irqs(void);
 extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+extern int acpi_probe_gsi(void);
 #ifdef CONFIG_X86_IO_APIC
 extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
 				u32 gsi, int triggering, int polarity);
@@ -71,6 +72,11 @@ mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
 	return 0;
 }
 #endif
+#else /* !CONFIG_ACPI: */
+static inline int acpi_probe_gsi(void)
+{
+	return 0;
+}
 #endif /* CONFIG_ACPI */
 
 #define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)

+ 1 - 0
arch/x86/include/asm/paravirt.h

@@ -1402,6 +1402,7 @@ static inline int __raw_spin_is_contended(struct raw_spinlock *lock)
 {
 	return PVOP_CALL1(int, pv_lock_ops.spin_is_contended, lock);
 }
+#define __raw_spin_is_contended	__raw_spin_is_contended
 
 static __always_inline void __raw_spin_lock(struct raw_spinlock *lock)
 {

+ 20 - 6
arch/x86/include/asm/pgtable.h

@@ -302,16 +302,30 @@ static inline pte_t pte_mkspecial(pte_t pte)
 
 extern pteval_t __supported_pte_mask;
 
+/*
+ * Mask out unsupported bits in a present pgprot.  Non-present pgprots
+ * can use those bits for other purposes, so leave them be.
+ */
+static inline pgprotval_t massage_pgprot(pgprot_t pgprot)
+{
+	pgprotval_t protval = pgprot_val(pgprot);
+
+	if (protval & _PAGE_PRESENT)
+		protval &= __supported_pte_mask;
+
+	return protval;
+}
+
 static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
 {
-	return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) |
-		      pgprot_val(pgprot)) & __supported_pte_mask);
+	return __pte(((phys_addr_t)page_nr << PAGE_SHIFT) |
+		     massage_pgprot(pgprot));
 }
 
 static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
 {
-	return __pmd((((phys_addr_t)page_nr << PAGE_SHIFT) |
-		      pgprot_val(pgprot)) & __supported_pte_mask);
+	return __pmd(((phys_addr_t)page_nr << PAGE_SHIFT) |
+		     massage_pgprot(pgprot));
 }
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
@@ -323,7 +337,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 	 * the newprot (if present):
 	 */
 	val &= _PAGE_CHG_MASK;
-	val |= pgprot_val(newprot) & (~_PAGE_CHG_MASK) & __supported_pte_mask;
+	val |= massage_pgprot(newprot) & ~_PAGE_CHG_MASK;
 
 	return __pte(val);
 }
@@ -339,7 +353,7 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 
 #define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
 
-#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
+#define canon_pgprot(p) __pgprot(massage_pgprot(p))
 
 static inline int is_new_memtype_allowed(unsigned long flags,
 						unsigned long new_flags)

+ 1 - 1
arch/x86/include/asm/processor.h

@@ -353,7 +353,7 @@ struct i387_soft_struct {
 	u8			no_update;
 	u8			rm;
 	u8			alimit;
-	struct info		*info;
+	struct math_emu_info	*info;
 	u32			entry_eip;
 };
 

+ 1 - 0
arch/x86/include/asm/spinlock.h

@@ -245,6 +245,7 @@ static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
 {
 	return __ticket_spin_is_contended(lock);
 }
+#define __raw_spin_is_contended	__raw_spin_is_contended
 
 static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
 {

+ 2 - 2
arch/x86/include/asm/traps.h

@@ -41,7 +41,7 @@ dotraplinkage void do_int3(struct pt_regs *, long);
 dotraplinkage void do_overflow(struct pt_regs *, long);
 dotraplinkage void do_bounds(struct pt_regs *, long);
 dotraplinkage void do_invalid_op(struct pt_regs *, long);
-dotraplinkage void do_device_not_available(struct pt_regs *, long);
+dotraplinkage void do_device_not_available(struct pt_regs);
 dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *, long);
 dotraplinkage void do_invalid_TSS(struct pt_regs *, long);
 dotraplinkage void do_segment_not_present(struct pt_regs *, long);
@@ -77,7 +77,7 @@ extern int panic_on_unrecovered_nmi;
 extern int kstack_depth_to_print;
 
 void math_error(void __user *);
-asmlinkage void math_emulate(long);
+void math_emulate(struct math_emu_info *);
 #ifdef CONFIG_X86_32
 unsigned long patch_espfix_desc(unsigned long, unsigned long);
 #else

+ 1 - 1
arch/x86/include/asm/xen/page.h

@@ -137,7 +137,7 @@ static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
 	pte_t pte;
 
 	pte.pte = ((phys_addr_t)page_nr << PAGE_SHIFT) |
-		(pgprot_val(pgprot) & __supported_pte_mask);
+			massage_pgprot(pgprot);
 
 	return pte;
 }

+ 23 - 0
arch/x86/kernel/acpi/boot.c

@@ -973,6 +973,29 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 	nr_ioapics++;
 }
 
+int __init acpi_probe_gsi(void)
+{
+	int idx;
+	int gsi;
+	int max_gsi = 0;
+
+	if (acpi_disabled)
+		return 0;
+
+	if (!acpi_ioapic)
+		return 0;
+
+	max_gsi = 0;
+	for (idx = 0; idx < nr_ioapics; idx++) {
+		gsi = mp_ioapic_routing[idx].gsi_end;
+
+		if (gsi > max_gsi)
+			max_gsi = gsi;
+	}
+
+	return max_gsi + 1;
+}
+
 static void assign_to_mp_irq(struct mp_config_intsrc *m,
 				    struct mp_config_intsrc *mp_irq)
 {

+ 2 - 2
arch/x86/kernel/acpi/sleep.c

@@ -156,11 +156,11 @@ static int __init acpi_sleep_setup(char *str)
 #ifdef CONFIG_HIBERNATION
 		if (strncmp(str, "s4_nohwsig", 10) == 0)
 			acpi_no_s4_hw_signature();
+		if (strncmp(str, "s4_nonvs", 8) == 0)
+			acpi_s4_no_nvs();
 #endif
 		if (strncmp(str, "old_ordering", 12) == 0)
 			acpi_old_suspend_ordering();
-		if (strncmp(str, "s4_nonvs", 8) == 0)
-			acpi_s4_no_nvs();
 		str = strchr(str, ',');
 		if (str != NULL)
 			str += strspn(str, ", \t");

+ 1 - 1
arch/x86/kernel/apic.c

@@ -1436,7 +1436,7 @@ static int __init detect_init_APIC(void)
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
 		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
-		    (boot_cpu_data.x86 == 15))
+		    (boot_cpu_data.x86 >= 15))
 			break;
 		goto no_apic;
 	case X86_VENDOR_INTEL:

+ 0 - 11
arch/x86/kernel/cpu/cpufreq/Kconfig

@@ -245,17 +245,6 @@ config X86_E_POWERSAVER
 
 comment "shared options"
 
-config X86_ACPI_CPUFREQ_PROC_INTF
-	bool "/proc/acpi/processor/../performance interface (deprecated)"
-	depends on PROC_FS
-	depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
-	help
-	  This enables the deprecated /proc/acpi/processor/../performance
-	  interface. While it is helpful for debugging, the generic,
-	  cross-architecture cpufreq interfaces should be used.
-
-	  If in doubt, say N.
-
 config X86_SPEEDSTEP_LIB
 	tristate
 	default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)

+ 22 - 6
arch/x86/kernel/cpu/cpufreq/powernow-k8.c

@@ -939,10 +939,25 @@ static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
 	free_cpumask_var(data->acpi_data.shared_cpu_map);
 }
 
+static int get_transition_latency(struct powernow_k8_data *data)
+{
+	int max_latency = 0;
+	int i;
+	for (i = 0; i < data->acpi_data.state_count; i++) {
+		int cur_latency = data->acpi_data.states[i].transition_latency
+			+ data->acpi_data.states[i].bus_master_latency;
+		if (cur_latency > max_latency)
+			max_latency = cur_latency;
+	}
+	/* value in usecs, needs to be in nanoseconds */
+	return 1000 * max_latency;
+}
+
 #else
 static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
 static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
+static int get_transition_latency(struct powernow_k8_data *data) { return 0; }
 #endif /* CONFIG_X86_POWERNOW_K8_ACPI */
 
 /* Take a frequency, and issue the fid/vid transition command */
@@ -1173,7 +1188,13 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		if (rc) {
 			goto err_out;
 		}
-	}
+		/* Take a crude guess here.
+		 * That guess was in microseconds, so multiply with 1000 */
+		pol->cpuinfo.transition_latency = (
+			 ((data->rvo + 8) * data->vstable * VST_UNITS_20US) +
+			 ((1 << data->irt) * 30)) * 1000;
+	} else /* ACPI _PSS objects available */
+		pol->cpuinfo.transition_latency = get_transition_latency(data);
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
@@ -1204,11 +1225,6 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		cpumask_copy(pol->cpus, &per_cpu(cpu_core_map, pol->cpu));
 	data->available_cores = pol->cpus;
 
-	/* Take a crude guess here.
-	 * That guess was in microseconds, so multiply with 1000 */
-	pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
-	    + (3 * (1 << data->irt) * 10)) * 1000;
-
 	if (cpu_family == CPU_HW_PSTATE)
 		pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
 	else

+ 3 - 0
arch/x86/kernel/cpu/intel.c

@@ -291,6 +291,9 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 		ds_init_intel(c);
 	}
 
+	if (c->x86 == 6 && c->x86_model == 29 && cpu_has_clflush)
+		set_cpu_cap(c, X86_FEATURE_CLFLUSH_MONITOR);
+
 #ifdef CONFIG_X86_64
 	if (c->x86 == 15)
 		c->x86_cache_alignment = c->x86_clflush_size * 2;

+ 15 - 0
arch/x86/kernel/cpu/intel_cacheinfo.c

@@ -36,8 +36,11 @@ static struct _cache_table cache_table[] __cpuinitdata =
 {
 	{ 0x06, LVL_1_INST, 8 },	/* 4-way set assoc, 32 byte line size */
 	{ 0x08, LVL_1_INST, 16 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x09, LVL_1_INST, 32 },	/* 4-way set assoc, 64 byte line size */
 	{ 0x0a, LVL_1_DATA, 8 },	/* 2 way set assoc, 32 byte line size */
 	{ 0x0c, LVL_1_DATA, 16 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x0d, LVL_1_DATA, 16 },	/* 4-way set assoc, 64 byte line size */
+	{ 0x21, LVL_2,      256 },	/* 8-way set assoc, 64 byte line size */
 	{ 0x22, LVL_3,      512 },	/* 4-way set assoc, sectored cache, 64 byte line size */
 	{ 0x23, LVL_3,      1024 },	/* 8-way set assoc, sectored cache, 64 byte line size */
 	{ 0x25, LVL_3,      2048 },	/* 8-way set assoc, sectored cache, 64 byte line size */
@@ -85,6 +88,18 @@ static struct _cache_table cache_table[] __cpuinitdata =
 	{ 0x85, LVL_2,    2048 },	/* 8-way set assoc, 32 byte line size */
 	{ 0x86, LVL_2,     512 },	/* 4-way set assoc, 64 byte line size */
 	{ 0x87, LVL_2,    1024 },	/* 8-way set assoc, 64 byte line size */
+	{ 0xd0, LVL_3,     512 },	/* 4-way set assoc, 64 byte line size */
+	{ 0xd1, LVL_3,    1024 },	/* 4-way set assoc, 64 byte line size */
+	{ 0xd2, LVL_3,    2048 },	/* 4-way set assoc, 64 byte line size */
+	{ 0xd6, LVL_3,    1024 },	/* 8-way set assoc, 64 byte line size */
+	{ 0xd7, LVL_3,    2038 },	/* 8-way set assoc, 64 byte line size */
+	{ 0xd8, LVL_3,    4096 },	/* 12-way set assoc, 64 byte line size */
+	{ 0xdc, LVL_3,    2048 },	/* 12-way set assoc, 64 byte line size */
+	{ 0xdd, LVL_3,    4096 },	/* 12-way set assoc, 64 byte line size */
+	{ 0xde, LVL_3,    8192 },	/* 12-way set assoc, 64 byte line size */
+	{ 0xe2, LVL_3,    2048 },	/* 16-way set assoc, 64 byte line size */
+	{ 0xe3, LVL_3,    4096 },	/* 16-way set assoc, 64 byte line size */
+	{ 0xe4, LVL_3,    8192 },	/* 16-way set assoc, 64 byte line size */
 	{ 0x00, 0, 0}
 };
 

+ 1 - 0
arch/x86/kernel/entry_64.S

@@ -346,6 +346,7 @@ ENTRY(save_args)
 	popq_cfi %rax			/* move return address... */
 	mov %gs:pda_irqstackptr,%rsp
 	EMPTY_FRAME 0
+	pushq_cfi %rbp			/* backlink for unwinder */
 	pushq_cfi %rax			/* ... to the new stack */
 	/*
 	 * We entered an interrupt context - irqs are off:

+ 9 - 8
arch/x86/kernel/ftrace.c

@@ -488,20 +488,21 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 	 * ignore such a protection.
 	 */
 	asm volatile(
-		"1: " _ASM_MOV " (%[parent_old]), %[old]\n"
-		"2: " _ASM_MOV " %[return_hooker], (%[parent_replaced])\n"
+		"1: " _ASM_MOV " (%[parent]), %[old]\n"
+		"2: " _ASM_MOV " %[return_hooker], (%[parent])\n"
 		"   movl $0, %[faulted]\n"
+		"3:\n"
 
 		".section .fixup, \"ax\"\n"
-		"3: movl $1, %[faulted]\n"
+		"4: movl $1, %[faulted]\n"
+		"   jmp 3b\n"
 		".previous\n"
 
-		_ASM_EXTABLE(1b, 3b)
-		_ASM_EXTABLE(2b, 3b)
+		_ASM_EXTABLE(1b, 4b)
+		_ASM_EXTABLE(2b, 4b)
 
-		: [parent_replaced] "=r" (parent), [old] "=r" (old),
-		  [faulted] "=r" (faulted)
-		: [parent_old] "0" (parent), [return_hooker] "r" (return_hooker)
+		: [old] "=r" (old), [faulted] "=r" (faulted)
+		: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
 		: "memory"
 	);
 

+ 10 - 2
arch/x86/kernel/hpet.c

@@ -897,13 +897,21 @@ static unsigned long hpet_rtc_flags;
 static int hpet_prev_update_sec;
 static struct rtc_time hpet_alarm_time;
 static unsigned long hpet_pie_count;
-static unsigned long hpet_t1_cmp;
+static u32 hpet_t1_cmp;
 static unsigned long hpet_default_delta;
 static unsigned long hpet_pie_delta;
 static unsigned long hpet_pie_limit;
 
 static rtc_irq_handler irq_handler;
 
+/*
+ * Check that the hpet counter c1 is ahead of the c2
+ */
+static inline int hpet_cnt_ahead(u32 c1, u32 c2)
+{
+	return (s32)(c2 - c1) < 0;
+}
+
 /*
  * Registers a IRQ handler.
  */
@@ -1075,7 +1083,7 @@ static void hpet_rtc_timer_reinit(void)
 		hpet_t1_cmp += delta;
 		hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
 		lost_ints++;
-	} while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0);
+	} while (!hpet_cnt_ahead(hpet_t1_cmp, hpet_readl(HPET_COUNTER)));
 
 	if (lost_ints) {
 		if (hpet_rtc_flags & RTC_PIE)

+ 8 - 9
arch/x86/kernel/i8237.c

@@ -28,10 +28,10 @@ static int i8237A_resume(struct sys_device *dev)
 
 	flags = claim_dma_lock();
 
-	dma_outb(DMA1_RESET_REG, 0);
-	dma_outb(DMA2_RESET_REG, 0);
+	dma_outb(0, DMA1_RESET_REG);
+	dma_outb(0, DMA2_RESET_REG);
 
-	for (i = 0;i < 8;i++) {
+	for (i = 0; i < 8; i++) {
 		set_dma_addr(i, 0x000000);
 		/* DMA count is a bit weird so this is not 0 */
 		set_dma_count(i, 1);
@@ -51,14 +51,14 @@ static int i8237A_suspend(struct sys_device *dev, pm_message_t state)
 }
 
 static struct sysdev_class i8237_sysdev_class = {
-	.name = "i8237",
-	.suspend = i8237A_suspend,
-	.resume = i8237A_resume,
+	.name		= "i8237",
+	.suspend	= i8237A_suspend,
+	.resume		= i8237A_resume,
 };
 
 static struct sys_device device_i8237A = {
-	.id	= 0,
-	.cls	= &i8237_sysdev_class,
+	.id		= 0,
+	.cls		= &i8237_sysdev_class,
 };
 
 static int __init i8237A_init_sysfs(void)
@@ -68,5 +68,4 @@ static int __init i8237A_init_sysfs(void)
 		error = sysdev_register(&device_i8237A);
 	return error;
 }
-
 device_initcall(i8237A_init_sysfs);

+ 18 - 7
arch/x86/kernel/io_apic.c

@@ -2528,14 +2528,15 @@ static void irq_complete_move(struct irq_desc **descp)
 
 	vector = ~get_irq_regs()->orig_ax;
 	me = smp_processor_id();
+
+	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) {
 #ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
 		*descp = desc = move_irq_desc(desc, me);
 		/* get the new one */
 		cfg = desc->chip_data;
 #endif
-
-	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
 		send_cleanup_vector(cfg);
+	}
 }
 #else
 static inline void irq_complete_move(struct irq_desc **descp) {}
@@ -3840,14 +3841,24 @@ int __init io_apic_get_redir_entries (int ioapic)
 
 void __init probe_nr_irqs_gsi(void)
 {
-	int idx;
 	int nr = 0;
 
-	for (idx = 0; idx < nr_ioapics; idx++)
-		nr += io_apic_get_redir_entries(idx) + 1;
-
-	if (nr > nr_irqs_gsi)
+	nr = acpi_probe_gsi();
+	if (nr > nr_irqs_gsi) {
 		nr_irqs_gsi = nr;
+	} else {
+		/* for acpi=off or acpi is not compiled in */
+		int idx;
+
+		nr = 0;
+		for (idx = 0; idx < nr_ioapics; idx++)
+			nr += io_apic_get_redir_entries(idx) + 1;
+
+		if (nr > nr_irqs_gsi)
+			nr_irqs_gsi = nr;
+	}
+
+	printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi);
 }
 
 /* --------------------------------------------------------------------------

+ 0 - 12
arch/x86/kernel/irqinit_32.c

@@ -78,15 +78,6 @@ void __init init_ISA_irqs(void)
 	}
 }
 
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "cascade",
-};
-
 DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
 	[0 ... IRQ0_VECTOR - 1] = -1,
 	[IRQ0_VECTOR] = 0,
@@ -178,9 +169,6 @@ void __init native_init_IRQ(void)
 	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 #endif
 
-	if (!acpi_ioapic)
-		setup_irq(2, &irq2);
-
 	/* setup after call gates are initialised (usually add in
 	 * the architecture specific gates)
 	 */

+ 6 - 0
arch/x86/kernel/process.c

@@ -180,6 +180,9 @@ void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 
 	trace_power_start(&it, POWER_CSTATE, (ax>>4)+1);
 	if (!need_resched()) {
+		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
+			clflush((void *)&current_thread_info()->flags);
+
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
 		smp_mb();
 		if (!need_resched())
@@ -194,6 +197,9 @@ static void mwait_idle(void)
 	struct power_trace it;
 	if (!need_resched()) {
 		trace_power_start(&it, POWER_CSTATE, 1);
+		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
+			clflush((void *)&current_thread_info()->flags);
+
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
 		smp_mb();
 		if (!need_resched())

+ 7 - 2
arch/x86/kernel/process_64.c

@@ -40,6 +40,7 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/ftrace.h>
+#include <linux/dmi.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -151,14 +152,18 @@ void __show_regs(struct pt_regs *regs, int all)
 	unsigned long d0, d1, d2, d3, d6, d7;
 	unsigned int fsindex, gsindex;
 	unsigned int ds, cs, es;
+	const char *board;
 
 	printk("\n");
 	print_modules();
-	printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s\n",
+	board = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (!board)
+		board = "";
+	printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s\n",
 		current->pid, current->comm, print_tainted(),
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
-		init_utsname()->version);
+		init_utsname()->version, board);
 	printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
 	printk_address(regs->ip, 1);
 	printk(KERN_INFO "RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss,

+ 1 - 1
arch/x86/kernel/setup.c

@@ -607,7 +607,7 @@ struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
 static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
 {
 	printk(KERN_NOTICE
-		"%s detected: BIOS may corrupt low RAM, working it around.\n",
+		"%s detected: BIOS may corrupt low RAM, working around it.\n",
 		d->ident);
 
 	e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);

+ 9 - 6
arch/x86/kernel/traps.c

@@ -896,7 +896,7 @@ asmlinkage void math_state_restore(void)
 EXPORT_SYMBOL_GPL(math_state_restore);
 
 #ifndef CONFIG_MATH_EMULATION
-asmlinkage void math_emulate(long arg)
+void math_emulate(struct math_emu_info *info)
 {
 	printk(KERN_EMERG
 		"math-emulation not enabled and no coprocessor found.\n");
@@ -906,16 +906,19 @@ asmlinkage void math_emulate(long arg)
 }
 #endif /* CONFIG_MATH_EMULATION */
 
-dotraplinkage void __kprobes
-do_device_not_available(struct pt_regs *regs, long error)
+dotraplinkage void __kprobes do_device_not_available(struct pt_regs regs)
 {
 #ifdef CONFIG_X86_32
 	if (read_cr0() & X86_CR0_EM) {
-		conditional_sti(regs);
-		math_emulate(0);
+		struct math_emu_info info = { };
+
+		conditional_sti(&regs);
+
+		info.regs = &regs;
+		math_emulate(&info);
 	} else {
 		math_state_restore(); /* interrupts still off */
-		conditional_sti(regs);
+		conditional_sti(&regs);
 	}
 #else
 	math_state_restore();

+ 11 - 0
arch/x86/kernel/vmi_32.c

@@ -320,6 +320,16 @@ static void vmi_release_pmd(unsigned long pfn)
 	vmi_ops.release_page(pfn, VMI_PAGE_L2);
 }
 
+/*
+ * We use the pgd_free hook for releasing the pgd page:
+ */
+static void vmi_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	unsigned long pfn = __pa(pgd) >> PAGE_SHIFT;
+
+	vmi_ops.release_page(pfn, VMI_PAGE_L2);
+}
+
 /*
  * Helper macros for MMU update flags.  We can defer updates until a flush
  * or page invalidation only if the update is to the current address space
@@ -762,6 +772,7 @@ static inline int __init activate_vmi(void)
 	if (vmi_ops.release_page) {
 		pv_mmu_ops.release_pte = vmi_release_pte;
 		pv_mmu_ops.release_pmd = vmi_release_pmd;
+		pv_mmu_ops.pgd_free = vmi_pgd_free;
 	}
 
 	/* Set linear is needed in all cases */

+ 12 - 0
arch/x86/mach-default/setup.c

@@ -38,6 +38,15 @@ void __init pre_intr_init_hook(void)
 	init_ISA_irqs();
 }
 
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+	.handler = no_action,
+	.mask = CPU_MASK_NONE,
+	.name = "cascade",
+};
+
 /**
  * intr_init_hook - post gate setup interrupt initialisation
  *
@@ -53,6 +62,9 @@ void __init intr_init_hook(void)
 		if (x86_quirks->arch_intr_init())
 			return;
 	}
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
+
 }
 
 /**

+ 11 - 1
arch/x86/mach-voyager/setup.c

@@ -33,13 +33,23 @@ void __init intr_init_hook(void)
 	setup_irq(2, &irq2);
 }
 
-void __init pre_setup_arch_hook(void)
+static void voyager_disable_tsc(void)
 {
 	/* Voyagers run their CPUs from independent clocks, so disable
 	 * the TSC code because we can't sync them */
 	setup_clear_cpu_cap(X86_FEATURE_TSC);
 }
 
+void __init pre_setup_arch_hook(void)
+{
+	voyager_disable_tsc();
+}
+
+void __init pre_time_init_hook(void)
+{
+	voyager_disable_tsc();
+}
+
 void __init trap_init_hook(void)
 {
 }

+ 12 - 13
arch/x86/mach-voyager/voyager_smp.c

@@ -81,7 +81,7 @@ static void enable_local_vic_irq(unsigned int irq);
 static void disable_local_vic_irq(unsigned int irq);
 static void before_handle_vic_irq(unsigned int irq);
 static void after_handle_vic_irq(unsigned int irq);
-static void set_vic_irq_affinity(unsigned int irq, cpumask_t mask);
+static void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask);
 static void ack_vic_irq(unsigned int irq);
 static void vic_enable_cpi(void);
 static void do_boot_cpu(__u8 cpuid);
@@ -211,8 +211,6 @@ static __u32 cpu_booted_map;
 static cpumask_t smp_commenced_mask = CPU_MASK_NONE;
 
 /* This is for the new dynamic CPU boot code */
-cpumask_t cpu_callin_map = CPU_MASK_NONE;
-cpumask_t cpu_callout_map = CPU_MASK_NONE;
 
 /* The per processor IRQ masks (these are usually kept in sync) */
 static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned;
@@ -378,7 +376,7 @@ void __init find_smp_config(void)
 	cpus_addr(phys_cpu_present_map)[0] |=
 	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
 				       3) << 24;
-	cpu_possible_map = phys_cpu_present_map;
+	init_cpu_possible(&phys_cpu_present_map);
 	printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
 	       cpus_addr(phys_cpu_present_map)[0]);
 	/* Here we set up the VIC to enable SMP */
@@ -1599,16 +1597,16 @@ static void after_handle_vic_irq(unsigned int irq)
  * change the mask and then do an interrupt enable CPI to re-enable on
  * the selected processors */
 
-void set_vic_irq_affinity(unsigned int irq, cpumask_t mask)
+void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	/* Only extended processors handle interrupts */
 	unsigned long real_mask;
 	unsigned long irq_mask = 1 << irq;
 	int cpu;
 
-	real_mask = cpus_addr(mask)[0] & voyager_extended_vic_processors;
+	real_mask = cpus_addr(*mask)[0] & voyager_extended_vic_processors;
 
-	if (cpus_addr(mask)[0] == 0)
+	if (cpus_addr(*mask)[0] == 0)
 		/* can't have no CPUs to accept the interrupt -- extremely
 		 * bad things will happen */
 		return;
@@ -1750,10 +1748,11 @@ static void __cpuinit voyager_smp_prepare_boot_cpu(void)
 	init_gdt(smp_processor_id());
 	switch_to_new_gdt();
 
-	cpu_set(smp_processor_id(), cpu_online_map);
-	cpu_set(smp_processor_id(), cpu_callout_map);
-	cpu_set(smp_processor_id(), cpu_possible_map);
-	cpu_set(smp_processor_id(), cpu_present_map);
+	cpu_online_map = cpumask_of_cpu(smp_processor_id());
+	cpu_callout_map = cpumask_of_cpu(smp_processor_id());
+	cpu_callin_map = CPU_MASK_NONE;
+	cpu_present_map = cpumask_of_cpu(smp_processor_id());
+
 }
 
 static int __cpuinit voyager_cpu_up(unsigned int cpu)
@@ -1783,9 +1782,9 @@ void __init smp_setup_processor_id(void)
 	x86_write_percpu(cpu_number, hard_smp_processor_id());
 }
 
-static void voyager_send_call_func(cpumask_t callmask)
+static void voyager_send_call_func(const struct cpumask *callmask)
 {
-	__u32 mask = cpus_addr(callmask)[0] & ~(1 << smp_processor_id());
+	__u32 mask = cpus_addr(*callmask)[0] & ~(1 << smp_processor_id());
 	send_CPI(mask, VIC_CALL_FUNCTION_CPI);
 }
 

+ 3 - 3
arch/x86/math-emu/fpu_entry.c

@@ -131,7 +131,7 @@ u_char emulating = 0;
 static int valid_prefix(u_char *Byte, u_char __user ** fpu_eip,
 			overrides * override);
 
-asmlinkage void math_emulate(long arg)
+void math_emulate(struct math_emu_info *info)
 {
 	u_char FPU_modrm, byte1;
 	unsigned short code;
@@ -161,7 +161,7 @@ asmlinkage void math_emulate(long arg)
 	RE_ENTRANT_CHECK_ON;
 #endif /* RE_ENTRANT_CHECKING */
 
-	SETUP_DATA_AREA(arg);
+	FPU_info = info;
 
 	FPU_ORIG_EIP = FPU_EIP;
 
@@ -659,7 +659,7 @@ static int valid_prefix(u_char *Byte, u_char __user **fpu_eip,
 	}
 }
 
-void math_abort(struct info *info, unsigned int signal)
+void math_abort(struct math_emu_info *info, unsigned int signal)
 {
 	FPU_EIP = FPU_ORIG_EIP;
 	current->thread.trap_no = 16;

+ 2 - 2
arch/x86/math-emu/fpu_proto.h

@@ -51,8 +51,8 @@ extern void ffreep(void);
 extern void fst_i_(void);
 extern void fstp_i(void);
 /* fpu_entry.c */
-asmlinkage extern void math_emulate(long arg);
-extern void math_abort(struct info *info, unsigned int signal);
+extern void math_emulate(struct math_emu_info *info);
+extern void math_abort(struct math_emu_info *info, unsigned int signal);
 /* fpu_etc.c */
 extern void FPU_etc(void);
 /* fpu_tags.c */

+ 6 - 10
arch/x86/math-emu/fpu_system.h

@@ -16,10 +16,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 
-/* This sets the pointer FPU_info to point to the argument part
-   of the stack frame of math_emulate() */
-#define SETUP_DATA_AREA(arg)	FPU_info = (struct info *) &arg
-
 /* s is always from a cpu register, and the cpu does bounds checking
  * during register load --> no further bounds checks needed */
 #define LDT_DESCRIPTOR(s)	(((struct desc_struct *)current->mm->context.ldt)[(s) >> 3])
@@ -38,12 +34,12 @@
 #define I387			(current->thread.xstate)
 #define FPU_info		(I387->soft.info)
 
-#define FPU_CS			(*(unsigned short *) &(FPU_info->___cs))
-#define FPU_SS			(*(unsigned short *) &(FPU_info->___ss))
-#define FPU_DS			(*(unsigned short *) &(FPU_info->___ds))
-#define FPU_EAX			(FPU_info->___eax)
-#define FPU_EFLAGS		(FPU_info->___eflags)
-#define FPU_EIP			(FPU_info->___eip)
+#define FPU_CS			(*(unsigned short *) &(FPU_info->regs->cs))
+#define FPU_SS			(*(unsigned short *) &(FPU_info->regs->ss))
+#define FPU_DS			(*(unsigned short *) &(FPU_info->regs->ds))
+#define FPU_EAX			(FPU_info->regs->ax)
+#define FPU_EFLAGS		(FPU_info->regs->flags)
+#define FPU_EIP			(FPU_info->regs->ip)
 #define FPU_ORIG_EIP		(FPU_info->___orig_eip)
 
 #define FPU_lookahead           (I387->soft.lookahead)

Alguns arquivos não foram mostrados porque muitos arquivos mudaram nesse diff