isci: merge stp request substates into primary state machine

Remove usage of the request substate machine for stp requests, and kill
the request substate infrastructure.

Similar to the previous conversions this adds the substates to the
primary state machine and arranges for the 'started' state to transition
to the proper stp substate.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/scsi/isci/Makefile

@@ -6,5 +6,4 @@ isci-objs := init.o phy.o request.o sata.o \
 	     remote_node_context.o \
 	     remote_node_table.o \
 	     unsolicited_frame_control.o \
-	     stp_request.o \
 	     port_config.o \

drivers/scsi/isci/request.h

@@ -59,7 +59,6 @@
 #include "isci.h"
 #include "host.h"
 #include "scu_task_context.h"
-#include "stp_request.h"
 
 /**
  * struct isci_request_status - This enum defines the possible states of an I/O
@@ -90,6 +89,63 @@ enum sci_request_protocol {
 	SCIC_STP_PROTOCOL
 }; /* XXX remove me, use sas_task.{dev|task_proto} instead */;
 
+struct scic_sds_stp_request {
+	union {
+		u32 ncq;
+
+		u32 udma;
+
+		struct scic_sds_stp_pio_request {
+			/**
+			 * Total transfer for the entire PIO request recorded at request constuction
+			 * time.
+			 *
+			 * @todo Should we just decrement this value for each byte of data transitted
+			 *       or received to elemenate the current_transfer_bytes field?
+			 */
+			u32 total_transfer_bytes;
+
+			/**
+			 * Total number of bytes received/transmitted in data frames since the start
+			 * of the IO request.  At the end of the IO request this should equal the
+			 * total_transfer_bytes.
+			 */
+			u32 current_transfer_bytes;
+
+			/**
+			 * The number of bytes requested in the in the PIO setup.
+			 */
+			u32 pio_transfer_bytes;
+
+			/**
+			 * PIO Setup ending status value to tell us if we need to wait for another FIS
+			 * or if the transfer is complete. On the receipt of a D2H FIS this will be
+			 * the status field of that FIS.
+			 */
+			u8 ending_status;
+
+			/**
+			 * On receipt of a D2H FIS this will be the ending error field if the
+			 * ending_status has the SATA_STATUS_ERR bit set.
+			 */
+			u8 ending_error;
+
+			struct scic_sds_request_pio_sgl {
+				struct scu_sgl_element_pair *sgl_pair;
+				u8 sgl_set;
+				u32 sgl_offset;
+			} request_current;
+		} pio;
+
+		struct {
+			/**
+			 * The number of bytes requested in the PIO setup before CDB data frame.
+			 */
+			u32 device_preferred_cdb_length;
+		} packet;
+	} type;
+};
+
 struct scic_sds_request {
 	/**
 	 * This field contains the information for the base request state machine.
@@ -158,12 +214,6 @@ struct scic_sds_request {
 	 */
 	bool is_task_management_request;
 
-	/**
-	 * This field indicates that this request contains an initialized started
-	 * substate machine.
-	 */
-	bool has_started_substate_machine;
-
 	/**
 	 * This field is a pointer to the stored rx frame data.  It is used in STP
 	 * internal requests and SMP response frames.  If this field is non-NULL the
@@ -173,12 +223,6 @@ struct scic_sds_request {
 	 */
 	u32 saved_rx_frame_index;
 
-	/**
-	 * This field specifies the data necessary to manage the sub-state
-	 * machine executed while in the SCI_BASE_REQUEST_STATE_STARTED state.
-	 */
-	struct sci_base_state_machine started_substate_machine;
-
 	/**
 	 * This field specifies the current state handlers in place for this
 	 * IO Request object.  This field is updated each time the request
@@ -295,6 +339,41 @@ enum sci_base_request_states {
 	 */
 	SCI_BASE_REQUEST_STATE_STARTED,
 
+	SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE,
+	SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE,
+
+	SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE,
+	SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE,
+
+	SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE,
+	SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE,
+	SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE,
+
+	/**
+	 * While in this state the IO request object is waiting for the TC completion
+	 * notification for the H2D Register FIS
+	 */
+	SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE,
+
+	/**
+	 * While in this state the IO request object is waiting for either a PIO Setup
+	 * FIS or a D2H register FIS.  The type of frame received is based on the
+	 * result of the prior frame and line conditions.
+	 */
+	SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE,
+
+	/**
+	 * While in this state the IO request object is waiting for a DATA frame from
+	 * the device.
+	 */
+	SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE,
+
+	/**
+	 * While in this state the IO request object is waiting to transmit the next data
+	 * frame to the device.
+	 */
+	SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE,
+
 	/**
 	 * The AWAIT_TC_COMPLETION sub-state indicates that the started raw
 	 * task management request is waiting for the transmission of the
@@ -383,8 +462,6 @@ struct scic_sds_io_request_state_handler {
 
 };
 
-extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[];
-
 /**
  * scic_sds_request_get_controller() -
  *
@@ -473,7 +550,6 @@ scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completi
 		(scu_sge).address_modifier = 0;	\
 	}
 
-void scic_sds_request_build_sgl(struct scic_sds_request *sci_req);
 enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req);
 enum sci_status scic_sds_io_request_terminate(struct scic_sds_request *sci_req);
 enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req,
@@ -481,8 +557,6 @@ enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_r
 enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req,
 						  u32 frame_index);
 enum sci_status scic_sds_task_request_terminate(struct scic_sds_request *sci_req);
-enum sci_status scic_sds_request_started_state_abort_handler(struct scic_sds_request *sci_req);
-
 
 /* XXX open code in caller */
 static inline void *scic_request_get_virt_addr(struct scic_sds_request *sci_req,
@@ -778,6 +852,9 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic,
 					    struct scic_sds_request *sci_req);
 enum sci_status scic_task_request_construct_ssp(struct scic_sds_request *sci_req);
 enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req);
+enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req,
+						    u32 transfer_length,
+						    enum dma_data_direction dir);
 void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag);
 void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req);
 #endif /* !defined(_ISCI_REQUEST_H_) */

drivers/scsi/isci/stp_request.c

@@ -1,1584 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <scsi/sas.h>
-#include "sas.h"
-#include "state_machine.h"
-#include "remote_device.h"
-#include "stp_request.h"
-#include "unsolicited_frame_control.h"
-#include "scu_completion_codes.h"
-#include "scu_event_codes.h"
-#include "scu_task_context.h"
-#include "request.h"
-
-/**
- * This method is will fill in the SCU Task Context for any type of SATA
- *    request.  This is called from the various SATA constructors.
- * @sci_req: The general IO request object which is to be used in
- *    constructing the SCU task context.
- * @task_context: The buffer pointer for the SCU task context which is being
- *    constructed.
- *
- * The general io request construction is complete. The buffer assignment for
- * the command buffer is complete. none Revisit task context construction to
- * determine what is common for SSP/SMP/STP task context structures.
- */
-static void scu_sata_reqeust_construct_task_context(
-	struct scic_sds_request *sci_req,
-	struct scu_task_context *task_context)
-{
-	dma_addr_t dma_addr;
-	struct scic_sds_controller *controller;
-	struct scic_sds_remote_device *target_device;
-	struct scic_sds_port *target_port;
-
-	controller = scic_sds_request_get_controller(sci_req);
-	target_device = scic_sds_request_get_device(sci_req);
-	target_port = scic_sds_request_get_port(sci_req);
-
-	/* Fill in the TC with the its required data */
-	task_context->abort = 0;
-	task_context->priority = SCU_TASK_PRIORITY_NORMAL;
-	task_context->initiator_request = 1;
-	task_context->connection_rate = target_device->connection_rate;
-	task_context->protocol_engine_index =
-		scic_sds_controller_get_protocol_engine_group(controller);
-	task_context->logical_port_index =
-		scic_sds_port_get_index(target_port);
-	task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP;
-	task_context->valid = SCU_TASK_CONTEXT_VALID;
-	task_context->context_type = SCU_TASK_CONTEXT_TYPE;
-
-	task_context->remote_node_index =
-		scic_sds_remote_device_get_index(sci_req->target_device);
-	task_context->command_code = 0;
-
-	task_context->link_layer_control = 0;
-	task_context->do_not_dma_ssp_good_response = 1;
-	task_context->strict_ordering = 0;
-	task_context->control_frame = 0;
-	task_context->timeout_enable = 0;
-	task_context->block_guard_enable = 0;
-
-	task_context->address_modifier = 0;
-	task_context->task_phase = 0x01;
-
-	task_context->ssp_command_iu_length =
-		(sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32);
-
-	/* Set the first word of the H2D REG FIS */
-	task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd;
-
-	if (sci_req->was_tag_assigned_by_user) {
-		/*
-		 * Build the task context now since we have already read
-		 * the data
-		 */
-		sci_req->post_context =
-			(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
-			 (scic_sds_controller_get_protocol_engine_group(
-							controller) <<
-			  SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
-			 (scic_sds_port_get_index(target_port) <<
-			  SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
-			 scic_sds_io_tag_get_index(sci_req->io_tag));
-	} else {
-		/*
-		 * Build the task context now since we have already read
-		 * the data.
-		 * I/O tag index is not assigned because we have to wait
-		 * until we get a TCi.
-		 */
-		sci_req->post_context =
-			(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
-			 (scic_sds_controller_get_protocol_engine_group(
-							controller) <<
-			  SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
-			 (scic_sds_port_get_index(target_port) <<
-			  SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT));
-	}
-
-	/*
-	 * Copy the physical address for the command buffer to the SCU Task
-	 * Context. We must offset the command buffer by 4 bytes because the
-	 * first 4 bytes are transfered in the body of the TC.
-	 */
-	dma_addr = scic_io_request_get_dma_addr(sci_req,
-					        ((char *) &sci_req->stp.cmd) +
-						sizeof(u32));
-
-	task_context->command_iu_upper = upper_32_bits(dma_addr);
-	task_context->command_iu_lower = lower_32_bits(dma_addr);
-
-	/* SATA Requests do not have a response buffer */
-	task_context->response_iu_upper = 0;
-	task_context->response_iu_lower = 0;
-}
-
-/**
- *
- * @sci_req:
- *
- * This method will perform any general sata request construction. What part of
- * SATA IO request construction is general? none
- */
-static void scic_sds_stp_non_ncq_request_construct(
-	struct scic_sds_request *sci_req)
-{
-	sci_req->has_started_substate_machine = true;
-}
-
-/**
- *
- * @sci_req: This parameter specifies the request to be constructed as an
- *    optimized request.
- * @optimized_task_type: This parameter specifies whether the request is to be
- *    an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A
- *    value of 1 indicates NCQ.
- *
- * This method will perform request construction common to all types of STP
- * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method
- * returns an indication as to whether the construction was successful.
- */
-static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req,
-						     u8 optimized_task_type,
-						     u32 len,
-						     enum dma_data_direction dir)
-{
-	struct scu_task_context *task_context = sci_req->task_context_buffer;
-
-	/* Build the STP task context structure */
-	scu_sata_reqeust_construct_task_context(sci_req, task_context);
-
-	/* Copy over the SGL elements */
-	scic_sds_request_build_sgl(sci_req);
-
-	/* Copy over the number of bytes to be transfered */
-	task_context->transfer_length_bytes = len;
-
-	if (dir == DMA_TO_DEVICE) {
-		/*
-		 * The difference between the DMA IN and DMA OUT request task type
-		 * values are consistent with the difference between FPDMA READ
-		 * and FPDMA WRITE values.  Add the supplied task type parameter
-		 * to this difference to set the task type properly for this
-		 * DATA OUT (WRITE) case. */
-		task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT
-								 - SCU_TASK_TYPE_DMA_IN);
-	} else {
-		/*
-		 * For the DATA IN (READ) case, simply save the supplied
-		 * optimized task type. */
-		task_context->task_type = optimized_task_type;
-	}
-}
-
-/**
- *
- * @sci_req: This parameter specifies the request to be constructed.
- *
- * This method will construct the STP UDMA request and its associated TC data.
- * This method returns an indication as to whether the construction was
- * successful. SCI_SUCCESS Currently this method always returns this value.
- */
-enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req,
-						   u32 len,
-						   enum dma_data_direction dir)
-{
-	scic_sds_stp_optimized_request_construct(sci_req,
-						 SCU_TASK_TYPE_FPDMAQ_READ,
-						 len, dir);
-	return SCI_SUCCESS;
-}
-
-/**
- * scu_stp_raw_request_construct_task_context -
- * @sci_req: This parameter specifies the STP request object for which to
- *    construct a RAW command frame task context.
- * @task_context: This parameter specifies the SCU specific task context buffer
- *    to construct.
- *
- * This method performs the operations common to all SATA/STP requests
- * utilizing the raw frame method. none
- */
-static void scu_stp_raw_request_construct_task_context(
-	struct scic_sds_stp_request *stp_req,
-	struct scu_task_context *task_context)
-{
-	struct scic_sds_request *sci_req = to_sci_req(stp_req);
-
-	scu_sata_reqeust_construct_task_context(sci_req, task_context);
-
-	task_context->control_frame         = 0;
-	task_context->priority              = SCU_TASK_PRIORITY_NORMAL;
-	task_context->task_type             = SCU_TASK_TYPE_SATA_RAW_FRAME;
-	task_context->type.stp.fis_type     = FIS_REGH2D;
-	task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32);
-}
-
-void scic_stp_io_request_set_ncq_tag(
-	struct scic_sds_request *req,
-	u16 ncq_tag)
-{
-	/**
-	 * @note This could be made to return an error to the user if the user
-	 *       attempts to set the NCQ tag in the wrong state.
-	 */
-	req->task_context_buffer->type.stp.ncq_tag = ncq_tag;
-}
-
-/**
- *
- * @sci_req:
- *
- * Get the next SGL element from the request. - Check on which SGL element pair
- * we are working - if working on SLG pair element A - advance to element B -
- * else - check to see if there are more SGL element pairs for this IO request
- * - if there are more SGL element pairs - advance to the next pair and return
- * element A struct scu_sgl_element*
- */
-static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req)
-{
-	struct scu_sgl_element *current_sgl;
-	struct scic_sds_request *sci_req = to_sci_req(stp_req);
-	struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current;
-
-	if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) {
-		if (pio_sgl->sgl_pair->B.address_lower == 0 &&
-		    pio_sgl->sgl_pair->B.address_upper == 0) {
-			current_sgl = NULL;
-		} else {
-			pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B;
-			current_sgl = &pio_sgl->sgl_pair->B;
-		}
-	} else {
-		if (pio_sgl->sgl_pair->next_pair_lower == 0 &&
-		    pio_sgl->sgl_pair->next_pair_upper == 0) {
-			current_sgl = NULL;
-		} else {
-			u64 phys_addr;
-
-			phys_addr = pio_sgl->sgl_pair->next_pair_upper;
-			phys_addr <<= 32;
-			phys_addr |= pio_sgl->sgl_pair->next_pair_lower;
-
-			pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr);
-			pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A;
-			current_sgl = &pio_sgl->sgl_pair->A;
-		}
-	}
-
-	return current_sgl;
-}
-
-/**
- *
- * @sci_req:
- * @completion_code:
- *
- * This method processes a TC completion.  The expected TC completion is for
- * the transmission of the H2D register FIS containing the SATA/STP non-data
- * request. This method always successfully processes the TC completion.
- * SCI_SUCCESS This value is always returned.
- */
-static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_handler(
-	struct scic_sds_request *sci_req,
-	u32 completion_code)
-{
-	switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
-		scic_sds_request_set_status(
-			sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS
-			);
-
-		sci_base_state_machine_change_state(
-			&sci_req->started_substate_machine,
-			SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE
-			);
-		break;
-
-	default:
-		/*
-		 * All other completion status cause the IO to be complete.  If a NAK
-		 * was received, then it is up to the user to retry the request. */
-		scic_sds_request_set_status(
-			sci_req,
-			SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
-			SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
-			);
-
-		sci_base_state_machine_change_state(
-			&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED);
-		break;
-	}
-
-	return SCI_SUCCESS;
-}
-
-/**
- *
- * @request: This parameter specifies the request for which a frame has been
- *    received.
- * @frame_index: This parameter specifies the index of the frame that has been
- *    received.
- *
- * This method processes frames received from the target while waiting for a
- * device to host register FIS.  If a non-register FIS is received during this
- * time, it is treated as a protocol violation from an IO perspective. Indicate
- * if the received frame was processed successfully.
- */
-static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler(
-	struct scic_sds_request *sci_req,
-	u32 frame_index)
-{
-	enum sci_status status;
-	struct dev_to_host_fis *frame_header;
-	u32 *frame_buffer;
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-	struct scic_sds_controller *scic = sci_req->owning_controller;
-
-	status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
-							       frame_index,
-							       (void **)&frame_header);
-
-	if (status != SCI_SUCCESS) {
-		dev_err(scic_to_dev(sci_req->owning_controller),
-			"%s: SCIC IO Request 0x%p could not get frame header "
-			"for frame index %d, status %x\n",
-			__func__, stp_req, frame_index, status);
-
-		return status;
-	}
-
-	switch (frame_header->fis_type) {
-	case FIS_REGD2H:
-		scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
-							      frame_index,
-							      (void **)&frame_buffer);
-
-		scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
-						       frame_header,
-						       frame_buffer);
-
-		/* The command has completed with error */
-		scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE,
-					    SCI_FAILURE_IO_RESPONSE_VALID);
-		break;
-
-	default:
-		dev_warn(scic_to_dev(scic),
-			 "%s: IO Request:0x%p Frame Id:%d protocol "
-			  "violation occurred\n", __func__, stp_req,
-			  frame_index);
-
-		scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS,
-					    SCI_FAILURE_PROTOCOL_VIOLATION);
-		break;
-	}
-
-	sci_base_state_machine_change_state(&sci_req->state_machine,
-					    SCI_BASE_REQUEST_STATE_COMPLETED);
-
-	/* Frame has been decoded return it to the controller */
-	scic_sds_controller_release_frame(scic, frame_index);
-
-	return status;
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = {
-	[SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.tc_completion_handler	= scic_sds_stp_request_non_data_await_h2d_tc_completion_handler,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.frame_handler		= scic_sds_stp_request_non_data_await_d2h_frame_handler,
-	}
-};
-
-static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(
-	void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_non_data_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE
-		);
-
-	scic_sds_remote_device_set_working_request(
-		sci_req->target_device, sci_req
-		);
-}
-
-static void scic_sds_stp_request_started_non_data_await_d2h_enter(void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_non_data_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE
-		);
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[] = {
-	[SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_non_data_await_d2h_enter,
-	},
-};
-
-enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req)
-{
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-
-	scic_sds_stp_non_ncq_request_construct(sci_req);
-
-	/* Build the STP task context structure */
-	scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer);
-
-	sci_base_state_machine_construct(&sci_req->started_substate_machine,
-					 sci_req,
-					 scic_sds_stp_request_started_non_data_substate_table,
-					 SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE);
-
-	return SCI_SUCCESS;
-}
-
-#define SCU_MAX_FRAME_BUFFER_SIZE  0x400  /* 1K is the maximum SCU frame data payload */
-
-/* transmit DATA_FIS from (current sgl + offset) for input
- * parameter length. current sgl and offset is alreay stored in the IO request
- */
-static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame(
-	struct scic_sds_request *sci_req,
-	u32 length)
-{
-	struct scic_sds_controller *scic = sci_req->owning_controller;
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-	struct scu_task_context *task_context;
-	struct scu_sgl_element *current_sgl;
-
-	/* Recycle the TC and reconstruct it for sending out DATA FIS containing
-	 * for the data from current_sgl+offset for the input length
-	 */
-	task_context = scic_sds_controller_get_task_context_buffer(scic,
-								   sci_req->io_tag);
-
-	if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A)
-		current_sgl = &stp_req->type.pio.request_current.sgl_pair->A;
-	else
-		current_sgl = &stp_req->type.pio.request_current.sgl_pair->B;
-
-	/* update the TC */
-	task_context->command_iu_upper = current_sgl->address_upper;
-	task_context->command_iu_lower = current_sgl->address_lower;
-	task_context->transfer_length_bytes = length;
-	task_context->type.stp.fis_type = FIS_DATA;
-
-	/* send the new TC out. */
-	return scic_controller_continue_io(sci_req);
-}
-
-static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req)
-{
-
-	struct scu_sgl_element *current_sgl;
-	u32 sgl_offset;
-	u32 remaining_bytes_in_current_sgl = 0;
-	enum sci_status status = SCI_SUCCESS;
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-
-	sgl_offset = stp_req->type.pio.request_current.sgl_offset;
-
-	if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) {
-		current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A);
-		remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset;
-	} else {
-		current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B);
-		remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset;
-	}
-
-
-	if (stp_req->type.pio.pio_transfer_bytes > 0) {
-		if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) {
-			/* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */
-			status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl);
-			if (status == SCI_SUCCESS) {
-				stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl;
-
-				/* update the current sgl, sgl_offset and save for future */
-				current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req);
-				sgl_offset = 0;
-			}
-		} else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) {
-			/* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */
-			scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes);
-
-			if (status == SCI_SUCCESS) {
-				/* Sgl offset will be adjusted and saved for future */
-				sgl_offset += stp_req->type.pio.pio_transfer_bytes;
-				current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes;
-				stp_req->type.pio.pio_transfer_bytes = 0;
-			}
-		}
-	}
-
-	if (status == SCI_SUCCESS) {
-		stp_req->type.pio.request_current.sgl_offset = sgl_offset;
-	}
-
-	return status;
-}
-
-/**
- *
- * @stp_request: The request that is used for the SGL processing.
- * @data_buffer: The buffer of data to be copied.
- * @length: The length of the data transfer.
- *
- * Copy the data from the buffer for the length specified to the IO reqeust SGL
- * specified data region. enum sci_status
- */
-static enum sci_status
-scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req,
-						  u8 *data_buf, u32 len)
-{
-	struct scic_sds_request *sci_req;
-	struct isci_request *ireq;
-	u8 *src_addr;
-	int copy_len;
-	struct sas_task *task;
-	struct scatterlist *sg;
-	void *kaddr;
-	int total_len = len;
-
-	sci_req = to_sci_req(stp_req);
-	ireq = sci_req_to_ireq(sci_req);
-	task = isci_request_access_task(ireq);
-	src_addr = data_buf;
-
-	if (task->num_scatter > 0) {
-		sg = task->scatter;
-
-		while (total_len > 0) {
-			struct page *page = sg_page(sg);
-
-			copy_len = min_t(int, total_len, sg_dma_len(sg));
-			kaddr = kmap_atomic(page, KM_IRQ0);
-			memcpy(kaddr + sg->offset, src_addr, copy_len);
-			kunmap_atomic(kaddr, KM_IRQ0);
-			total_len -= copy_len;
-			src_addr += copy_len;
-			sg = sg_next(sg);
-		}
-	} else {
-		BUG_ON(task->total_xfer_len < total_len);
-		memcpy(task->scatter, src_addr, total_len);
-	}
-
-	return SCI_SUCCESS;
-}
-
-/**
- *
- * @sci_req: The PIO DATA IN request that is to receive the data.
- * @data_buffer: The buffer to copy from.
- *
- * Copy the data buffer to the io request data region. enum sci_status
- */
-static enum sci_status scic_sds_stp_request_pio_data_in_copy_data(
-	struct scic_sds_stp_request *sci_req,
-	u8 *data_buffer)
-{
-	enum sci_status status;
-
-	/*
-	 * If there is less than 1K remaining in the transfer request
-	 * copy just the data for the transfer */
-	if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) {
-		status = scic_sds_stp_request_pio_data_in_copy_data_buffer(
-			sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes);
-
-		if (status == SCI_SUCCESS)
-			sci_req->type.pio.pio_transfer_bytes = 0;
-	} else {
-		/* We are transfering the whole frame so copy */
-		status = scic_sds_stp_request_pio_data_in_copy_data_buffer(
-			sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE);
-
-		if (status == SCI_SUCCESS)
-			sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE;
-	}
-
-	return status;
-}
-
-/**
- *
- * @sci_req:
- * @completion_code:
- *
- * enum sci_status
- */
-static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler(
-	struct scic_sds_request *sci_req,
-	u32 completion_code)
-{
-	enum sci_status status = SCI_SUCCESS;
-
-	switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
-		scic_sds_request_set_status(
-			sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS
-			);
-
-		sci_base_state_machine_change_state(
-			&sci_req->started_substate_machine,
-			SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
-			);
-		break;
-
-	default:
-		/*
-		 * All other completion status cause the IO to be complete.  If a NAK
-		 * was received, then it is up to the user to retry the request. */
-		scic_sds_request_set_status(
-			sci_req,
-			SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
-			SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
-			);
-
-		sci_base_state_machine_change_state(
-			&sci_req->state_machine,
-			SCI_BASE_REQUEST_STATE_COMPLETED
-			);
-		break;
-	}
-
-	return status;
-}
-
-static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct scic_sds_request *sci_req,
-									  u32 frame_index)
-{
-	struct scic_sds_controller *scic = sci_req->owning_controller;
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-	struct isci_request *ireq = sci_req_to_ireq(sci_req);
-	struct sas_task *task = isci_request_access_task(ireq);
-	struct dev_to_host_fis *frame_header;
-	enum sci_status status;
-	u32 *frame_buffer;
-
-	status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
-							       frame_index,
-							       (void **)&frame_header);
-
-	if (status != SCI_SUCCESS) {
-		dev_err(scic_to_dev(scic),
-			"%s: SCIC IO Request 0x%p could not get frame header "
-			"for frame index %d, status %x\n",
-			__func__, stp_req, frame_index, status);
-		return status;
-	}
-
-	switch (frame_header->fis_type) {
-	case FIS_PIO_SETUP:
-		/* Get from the frame buffer the PIO Setup Data */
-		scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
-							      frame_index,
-							      (void **)&frame_buffer);
-
-		/* Get the data from the PIO Setup The SCU Hardware returns
-		 * first word in the frame_header and the rest of the data is in
-		 * the frame buffer so we need to back up one dword
-		 */
-
-		/* transfer_count: first 16bits in the 4th dword */
-		stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff;
-
-		/* ending_status: 4th byte in the 3rd dword */
-		stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff;
-
-		scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
-						       frame_header,
-						       frame_buffer);
-
-		sci_req->stp.rsp.status = stp_req->type.pio.ending_status;
-
-		/* The next state is dependent on whether the
-		 * request was PIO Data-in or Data out
-		 */
-		if (task->data_dir == DMA_FROM_DEVICE) {
-			sci_base_state_machine_change_state(&sci_req->started_substate_machine,
-							    SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE);
-		} else if (task->data_dir == DMA_TO_DEVICE) {
-			/* Transmit data */
-			status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req);
-			if (status != SCI_SUCCESS)
-				break;
-			sci_base_state_machine_change_state(&sci_req->started_substate_machine,
-							    SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE);
-		}
-		break;
-	case FIS_SETDEVBITS:
-		sci_base_state_machine_change_state(&sci_req->started_substate_machine,
-						    SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE);
-		break;
-	case FIS_REGD2H:
-		if (frame_header->status & ATA_BUSY) {
-			/* Now why is the drive sending a D2H Register FIS when
-			 * it is still busy?  Do nothing since we are still in
-			 * the right state.
-			 */
-			dev_dbg(scic_to_dev(scic),
-				"%s: SCIC PIO Request 0x%p received "
-				"D2H Register FIS with BSY status "
-				"0x%x\n", __func__, stp_req,
-				frame_header->status);
-			break;
-		}
-
-		scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
-							      frame_index,
-							      (void **)&frame_buffer);
-
-		scic_sds_controller_copy_sata_response(&sci_req->stp.req,
-						       frame_header,
-						       frame_buffer);
-
-		scic_sds_request_set_status(sci_req,
-					    SCU_TASK_DONE_CHECK_RESPONSE,
-					    SCI_FAILURE_IO_RESPONSE_VALID);
-
-		sci_base_state_machine_change_state(&sci_req->state_machine,
-						    SCI_BASE_REQUEST_STATE_COMPLETED);
-		break;
-	default:
-		/* FIXME: what do we do here? */
-		break;
-	}
-
-	/* Frame is decoded return it to the controller */
-	scic_sds_controller_release_frame(scic, frame_index);
-
-	return status;
-}
-
-static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler(struct scic_sds_request *sci_req,
-										 u32 frame_index)
-{
-	enum sci_status status;
-	struct dev_to_host_fis *frame_header;
-	struct sata_fis_data *frame_buffer;
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-	struct scic_sds_controller *scic = sci_req->owning_controller;
-
-	status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
-							       frame_index,
-							       (void **)&frame_header);
-
-	if (status != SCI_SUCCESS) {
-		dev_err(scic_to_dev(scic),
-			"%s: SCIC IO Request 0x%p could not get frame header "
-			"for frame index %d, status %x\n",
-			__func__, stp_req, frame_index, status);
-		return status;
-	}
-
-	if (frame_header->fis_type == FIS_DATA) {
-		if (stp_req->type.pio.request_current.sgl_pair == NULL) {
-			sci_req->saved_rx_frame_index = frame_index;
-			stp_req->type.pio.pio_transfer_bytes = 0;
-		} else {
-			scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
-								      frame_index,
-								      (void **)&frame_buffer);
-
-			status = scic_sds_stp_request_pio_data_in_copy_data(stp_req,
-									    (u8 *)frame_buffer);
-
-			/* Frame is decoded return it to the controller */
-			scic_sds_controller_release_frame(scic, frame_index);
-		}
-
-		/* Check for the end of the transfer, are there more
-		 * bytes remaining for this data transfer
-		 */
-		if (status != SCI_SUCCESS ||
-		    stp_req->type.pio.pio_transfer_bytes != 0)
-			return status;
-
-		if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) {
-			scic_sds_request_set_status(sci_req,
-						    SCU_TASK_DONE_CHECK_RESPONSE,
-						    SCI_FAILURE_IO_RESPONSE_VALID);
-
-			sci_base_state_machine_change_state(&sci_req->state_machine,
-							    SCI_BASE_REQUEST_STATE_COMPLETED);
-		} else {
-			sci_base_state_machine_change_state(&sci_req->started_substate_machine,
-							    SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE);
-		}
-	} else {
-		dev_err(scic_to_dev(scic),
-			"%s: SCIC PIO Request 0x%p received frame %d "
-			"with fis type 0x%02x when expecting a data "
-			"fis.\n", __func__, stp_req, frame_index,
-			frame_header->fis_type);
-
-		scic_sds_request_set_status(sci_req,
-					    SCU_TASK_DONE_GOOD,
-					    SCI_FAILURE_IO_REQUIRES_SCSI_ABORT);
-
-		sci_base_state_machine_change_state(&sci_req->state_machine,
-						    SCI_BASE_REQUEST_STATE_COMPLETED);
-
-		/* Frame is decoded return it to the controller */
-		scic_sds_controller_release_frame(scic, frame_index);
-	}
-
-	return status;
-}
-
-
-/**
- *
- * @sci_req:
- * @completion_code:
- *
- * enum sci_status
- */
-static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler(
-
-	struct scic_sds_request *sci_req,
-	u32 completion_code)
-{
-	enum sci_status status = SCI_SUCCESS;
-	bool all_frames_transferred = false;
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-
-	switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
-		/* Transmit data */
-		if (stp_req->type.pio.pio_transfer_bytes != 0) {
-			status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req);
-			if (status == SCI_SUCCESS) {
-				if (stp_req->type.pio.pio_transfer_bytes == 0)
-					all_frames_transferred = true;
-			}
-		} else if (stp_req->type.pio.pio_transfer_bytes == 0) {
-			/*
-			 * this will happen if the all data is written at the
-			 * first time after the pio setup fis is received
-			 */
-			all_frames_transferred  = true;
-		}
-
-		/* all data transferred. */
-		if (all_frames_transferred) {
-			/*
-			 * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE
-			 * and wait for PIO_SETUP fis / or D2H REg fis. */
-			sci_base_state_machine_change_state(
-				&sci_req->started_substate_machine,
-				SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
-				);
-		}
-		break;
-
-	default:
-		/*
-		 * All other completion status cause the IO to be complete.  If a NAK
-		 * was received, then it is up to the user to retry the request. */
-		scic_sds_request_set_status(
-			sci_req,
-			SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
-			SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
-			);
-
-		sci_base_state_machine_change_state(
-			&sci_req->state_machine,
-			SCI_BASE_REQUEST_STATE_COMPLETED
-			);
-		break;
-	}
-
-	return status;
-}
-
-/**
- *
- * @request: This is the request which is receiving the event.
- * @event_code: This is the event code that the request on which the request is
- *    expected to take action.
- *
- * This method will handle any link layer events while waiting for the data
- * frame. enum sci_status SCI_SUCCESS SCI_FAILURE
- */
-static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler(
-	struct scic_sds_request *request,
-	u32 event_code)
-{
-	enum sci_status status;
-
-	switch (scu_get_event_specifier(event_code)) {
-	case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT:
-		/*
-		 * We are waiting for data and the SCU has R_ERR the data frame.
-		 * Go back to waiting for the D2H Register FIS */
-		sci_base_state_machine_change_state(
-			&request->started_substate_machine,
-			SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
-			);
-
-		status = SCI_SUCCESS;
-		break;
-
-	default:
-		dev_err(scic_to_dev(request->owning_controller),
-			"%s: SCIC PIO Request 0x%p received unexpected "
-			"event 0x%08x\n",
-			__func__, request, event_code);
-
-		/* / @todo Should we fail the PIO request when we get an unexpected event? */
-		status = SCI_FAILURE;
-		break;
-	}
-
-	return status;
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = {
-	[SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.tc_completion_handler	= scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.frame_handler		= scic_sds_stp_request_pio_await_frame_frame_handler
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.event_handler		= scic_sds_stp_request_pio_data_in_await_data_event_handler,
-		.frame_handler		= scic_sds_stp_request_pio_data_in_await_data_frame_handler
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.tc_completion_handler	= scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler,
-	}
-};
-
-static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(
-	void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_pio_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE
-		);
-
-	scic_sds_remote_device_set_working_request(
-		sci_req->target_device, sci_req);
-}
-
-static void scic_sds_stp_request_started_pio_await_frame_enter(void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_pio_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE
-		);
-}
-
-static void scic_sds_stp_request_started_pio_data_in_await_data_enter(
-	void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_pio_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE
-		);
-}
-
-static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter(
-	void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_pio_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE
-		);
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[] = {
-	[SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_pio_await_frame_enter,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_pio_data_in_await_data_enter,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_pio_data_out_transmit_data_enter,
-	}
-};
-
-enum sci_status
-scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req,
-				   bool copy_rx_frame)
-{
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-	struct scic_sds_stp_pio_request *pio = &stp_req->type.pio;
-
-	scic_sds_stp_non_ncq_request_construct(sci_req);
-
-	scu_stp_raw_request_construct_task_context(stp_req,
-						   sci_req->task_context_buffer);
-
-	pio->current_transfer_bytes = 0;
-	pio->ending_error = 0;
-	pio->ending_status = 0;
-
-	pio->request_current.sgl_offset = 0;
-	pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A;
-
-	if (copy_rx_frame) {
-		scic_sds_request_build_sgl(sci_req);
-		/* Since the IO request copy of the TC contains the same data as
-		 * the actual TC this pointer is vaild for either.
-		 */
-		pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab;
-	} else {
-		/* The user does not want the data copied to the SGL buffer location */
-		pio->request_current.sgl_pair = NULL;
-	}
-
-	sci_base_state_machine_construct(&sci_req->started_substate_machine,
-					 sci_req,
-					 scic_sds_stp_request_started_pio_substate_table,
-					 SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE);
-
-	return SCI_SUCCESS;
-}
-
-static void scic_sds_stp_request_udma_complete_request(
-	struct scic_sds_request *request,
-	u32 scu_status,
-	enum sci_status sci_status)
-{
-	scic_sds_request_set_status(request, scu_status, sci_status);
-	sci_base_state_machine_change_state(&request->state_machine,
-		SCI_BASE_REQUEST_STATE_COMPLETED);
-}
-
-static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req,
-								       u32 frame_index)
-{
-	struct scic_sds_controller *scic = sci_req->owning_controller;
-	struct dev_to_host_fis *frame_header;
-	enum sci_status status;
-	u32 *frame_buffer;
-
-	status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
-							       frame_index,
-							       (void **)&frame_header);
-
-	if ((status == SCI_SUCCESS) &&
-	    (frame_header->fis_type == FIS_REGD2H)) {
-		scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
-							      frame_index,
-							      (void **)&frame_buffer);
-
-		scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
-						       frame_header,
-						       frame_buffer);
-	}
-
-	scic_sds_controller_release_frame(scic, frame_index);
-
-	return status;
-}
-
-static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler(
-	struct scic_sds_request *sci_req,
-	u32 completion_code)
-{
-	enum sci_status status = SCI_SUCCESS;
-
-	switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
-		scic_sds_stp_request_udma_complete_request(sci_req,
-							   SCU_TASK_DONE_GOOD,
-							   SCI_SUCCESS);
-		break;
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS):
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
-		/*
-		 * We must check ther response buffer to see if the D2H Register FIS was
-		 * received before we got the TC completion. */
-		if (sci_req->stp.rsp.fis_type == FIS_REGD2H) {
-			scic_sds_remote_device_suspend(sci_req->target_device,
-				SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
-
-			scic_sds_stp_request_udma_complete_request(sci_req,
-								   SCU_TASK_DONE_CHECK_RESPONSE,
-								   SCI_FAILURE_IO_RESPONSE_VALID);
-		} else {
-			/*
-			 * If we have an error completion status for the TC then we can expect a
-			 * D2H register FIS from the device so we must change state to wait for it */
-			sci_base_state_machine_change_state(&sci_req->started_substate_machine,
-				SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE);
-		}
-		break;
-
-	/*
-	 * / @todo Check to see if any of these completion status need to wait for
-	 * /       the device to host register fis. */
-	/* / @todo We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR - this comes only for B0 */
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN):
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR):
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR):
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR):
-		scic_sds_remote_device_suspend(sci_req->target_device,
-			SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
-	/* Fall through to the default case */
-	default:
-		/* All other completion status cause the IO to be complete. */
-		scic_sds_stp_request_udma_complete_request(sci_req,
-					SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
-					SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
-		break;
-	}
-
-	return status;
-}
-
-static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler(
-	struct scic_sds_request *sci_req,
-	u32 frame_index)
-{
-	enum sci_status status;
-
-	/* Use the general frame handler to copy the resposne data */
-	status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index);
-
-	if (status != SCI_SUCCESS)
-		return status;
-
-	scic_sds_stp_request_udma_complete_request(sci_req,
-						   SCU_TASK_DONE_CHECK_RESPONSE,
-						   SCI_FAILURE_IO_RESPONSE_VALID);
-
-	return status;
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = {
-	[SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.tc_completion_handler	= scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler,
-		.frame_handler		= scic_sds_stp_request_udma_general_frame_handler,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.frame_handler		= scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler,
-	},
-};
-
-static void scic_sds_stp_request_started_udma_await_tc_completion_enter(
-	void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_udma_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE
-		);
-}
-
-/**
- *
- *
- * This state is entered when there is an TC completion failure.  The hardware
- * received an unexpected condition while processing the IO request and now
- * will UF the D2H register FIS to complete the IO.
- */
-static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter(
-	void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_udma_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE
-		);
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[] = {
-	[SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_udma_await_tc_completion_enter,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter,
-	},
-};
-
-enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req,
-						    u32 len,
-						    enum dma_data_direction dir)
-{
-	scic_sds_stp_non_ncq_request_construct(sci_req);
-
-	scic_sds_stp_optimized_request_construct(sci_req, SCU_TASK_TYPE_DMA_IN,
-						 len, dir);
-
-	sci_base_state_machine_construct(
-		&sci_req->started_substate_machine,
-		sci_req,
-		scic_sds_stp_request_started_udma_substate_table,
-		SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE
-		);
-
-	return SCI_SUCCESS;
-}
-
-/**
- *
- * @sci_req:
- * @completion_code:
- *
- * This method processes a TC completion.  The expected TC completion is for
- * the transmission of the H2D register FIS containing the SATA/STP non-data
- * request. This method always successfully processes the TC completion.
- * SCI_SUCCESS This value is always returned.
- */
-static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler(
-	struct scic_sds_request *sci_req,
-	u32 completion_code)
-{
-	switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
-		scic_sds_request_set_status(
-			sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS
-			);
-
-		sci_base_state_machine_change_state(
-			&sci_req->started_substate_machine,
-			SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE
-			);
-		break;
-
-	default:
-		/*
-		 * All other completion status cause the IO to be complete.  If a NAK
-		 * was received, then it is up to the user to retry the request. */
-		scic_sds_request_set_status(
-			sci_req,
-			SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
-			SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
-			);
-
-		sci_base_state_machine_change_state(
-			&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED);
-		break;
-	}
-
-	return SCI_SUCCESS;
-}
-
-/**
- *
- * @sci_req:
- * @completion_code:
- *
- * This method processes a TC completion.  The expected TC completion is for
- * the transmission of the H2D register FIS containing the SATA/STP non-data
- * request. This method always successfully processes the TC completion.
- * SCI_SUCCESS This value is always returned.
- */
-static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler(
-	struct scic_sds_request *sci_req,
-	u32 completion_code)
-{
-	switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
-	case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
-		scic_sds_request_set_status(
-			sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS
-			);
-
-		sci_base_state_machine_change_state(
-			&sci_req->started_substate_machine,
-			SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE
-			);
-		break;
-
-	default:
-		/*
-		 * All other completion status cause the IO to be complete.  If a NAK
-		 * was received, then it is up to the user to retry the request. */
-		scic_sds_request_set_status(
-			sci_req,
-			SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
-			SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
-			);
-
-		sci_base_state_machine_change_state(&sci_req->state_machine,
-				SCI_BASE_REQUEST_STATE_COMPLETED);
-		break;
-	}
-
-	return SCI_SUCCESS;
-}
-
-/**
- *
- * @request: This parameter specifies the request for which a frame has been
- *    received.
- * @frame_index: This parameter specifies the index of the frame that has been
- *    received.
- *
- * This method processes frames received from the target while waiting for a
- * device to host register FIS.  If a non-register FIS is received during this
- * time, it is treated as a protocol violation from an IO perspective. Indicate
- * if the received frame was processed successfully.
- */
-static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler(
-	struct scic_sds_request *sci_req,
-	u32 frame_index)
-{
-	enum sci_status status;
-	struct dev_to_host_fis *frame_header;
-	u32 *frame_buffer;
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-	struct scic_sds_controller *scic = sci_req->owning_controller;
-
-	status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
-							       frame_index,
-							       (void **)&frame_header);
-	if (status != SCI_SUCCESS) {
-		dev_err(scic_to_dev(scic),
-			"%s: SCIC IO Request 0x%p could not get frame header "
-			"for frame index %d, status %x\n",
-			__func__, stp_req, frame_index, status);
-		return status;
-	}
-
-	switch (frame_header->fis_type) {
-	case FIS_REGD2H:
-		scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
-							      frame_index,
-							      (void **)&frame_buffer);
-
-		scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
-						       frame_header,
-						       frame_buffer);
-
-		/* The command has completed with error */
-		scic_sds_request_set_status(sci_req,
-					    SCU_TASK_DONE_CHECK_RESPONSE,
-					    SCI_FAILURE_IO_RESPONSE_VALID);
-		break;
-
-	default:
-		dev_warn(scic_to_dev(scic),
-			 "%s: IO Request:0x%p Frame Id:%d protocol "
-			 "violation occurred\n", __func__, stp_req,
-			 frame_index);
-
-		scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS,
-					    SCI_FAILURE_PROTOCOL_VIOLATION);
-		break;
-	}
-
-	sci_base_state_machine_change_state(&sci_req->state_machine,
-					    SCI_BASE_REQUEST_STATE_COMPLETED);
-
-	/* Frame has been decoded return it to the controller */
-	scic_sds_controller_release_frame(scic, frame_index);
-
-	return status;
-}
-
-/* --------------------------------------------------------------------------- */
-
-static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = {
-	[SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.tc_completion_handler	= scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.tc_completion_handler	= scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = {
-		.abort_handler		= scic_sds_request_started_state_abort_handler,
-		.frame_handler		= scic_sds_stp_request_soft_reset_await_d2h_frame_handler,
-	},
-};
-
-static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(
-	void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_soft_reset_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE
-		);
-
-	scic_sds_remote_device_set_working_request(
-		sci_req->target_device, sci_req
-		);
-}
-
-static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(
-	void *object)
-{
-	struct scic_sds_request *sci_req = object;
-	struct scu_task_context *task_context;
-	struct host_to_dev_fis *h2d_fis;
-	enum sci_status status;
-
-	/* Clear the SRST bit */
-	h2d_fis = &sci_req->stp.cmd;
-	h2d_fis->control = 0;
-
-	/* Clear the TC control bit */
-	task_context = scic_sds_controller_get_task_context_buffer(
-		sci_req->owning_controller, sci_req->io_tag);
-	task_context->control_frame = 0;
-
-	status = scic_controller_continue_io(sci_req);
-	if (status == SCI_SUCCESS) {
-		SET_STATE_HANDLER(
-			sci_req,
-			scic_sds_stp_request_started_soft_reset_substate_handler_table,
-			SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE
-			);
-	}
-}
-
-static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter(
-	void *object)
-{
-	struct scic_sds_request *sci_req = object;
-
-	SET_STATE_HANDLER(
-		sci_req,
-		scic_sds_stp_request_started_soft_reset_substate_handler_table,
-		SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE
-		);
-}
-
-static const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[] = {
-	[SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter,
-	},
-	[SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = {
-		.enter_state = scic_sds_stp_request_started_soft_reset_await_d2h_response_enter,
-	},
-};
-
-enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req)
-{
-	struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
-
-	scic_sds_stp_non_ncq_request_construct(sci_req);
-
-	/* Build the STP task context structure */
-	scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer);
-
-	sci_base_state_machine_construct(&sci_req->started_substate_machine,
-					 sci_req,
-					 scic_sds_stp_request_started_soft_reset_substate_table,
-					 SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE);
-
-	return SCI_SUCCESS;
-}

drivers/scsi/isci/stp_request.h

@@ -1,195 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SCIC_SDS_STP_REQUEST_T_
-#define _SCIC_SDS_STP_REQUEST_T_
-
-#include <linux/dma-mapping.h>
-#include <scsi/sas.h>
-
-struct scic_sds_stp_request {
-	union {
-		u32 ncq;
-
-		u32 udma;
-
-		struct scic_sds_stp_pio_request {
-			/**
-			 * Total transfer for the entire PIO request recorded at request constuction
-			 * time.
-			 *
-			 * @todo Should we just decrement this value for each byte of data transitted
-			 *       or received to elemenate the current_transfer_bytes field?
-			 */
-			u32 total_transfer_bytes;
-
-			/**
-			 * Total number of bytes received/transmitted in data frames since the start
-			 * of the IO request.  At the end of the IO request this should equal the
-			 * total_transfer_bytes.
-			 */
-			u32 current_transfer_bytes;
-
-			/**
-			 * The number of bytes requested in the in the PIO setup.
-			 */
-			u32 pio_transfer_bytes;
-
-			/**
-			 * PIO Setup ending status value to tell us if we need to wait for another FIS
-			 * or if the transfer is complete. On the receipt of a D2H FIS this will be
-			 * the status field of that FIS.
-			 */
-			u8 ending_status;
-
-			/**
-			 * On receipt of a D2H FIS this will be the ending error field if the
-			 * ending_status has the SATA_STATUS_ERR bit set.
-			 */
-			u8 ending_error;
-
-			struct scic_sds_request_pio_sgl {
-				struct scu_sgl_element_pair *sgl_pair;
-				u8 sgl_set;
-				u32 sgl_offset;
-			} request_current;
-		} pio;
-
-		struct {
-			/**
-			 * The number of bytes requested in the PIO setup before CDB data frame.
-			 */
-			u32 device_preferred_cdb_length;
-		} packet;
-	} type;
-};
-
-/**
- * enum scic_sds_stp_request_started_udma_substates - This enumeration depicts
- *    the various sub-states associated with a SATA/STP UDMA protocol operation.
- *
- *
- */
-enum scic_sds_stp_request_started_udma_substates {
-	SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE,
-	SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE,
-};
-
-/**
- * enum scic_sds_stp_request_started_non_data_substates - This enumeration
- *    depicts the various sub-states associated with a SATA/STP non-data
- *    protocol operation.
- *
- *
- */
-enum scic_sds_stp_request_started_non_data_substates {
-	SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE,
-	SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE,
-};
-
-/**
- * enum scic_sds_stp_request_started_soft_reset_substates - THis enumeration
- *    depicts the various sub-states associated with a SATA/STP soft reset
- *    operation.
- *
- *
- */
-enum scic_sds_stp_request_started_soft_reset_substates {
-	SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE,
-	SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE,
-	SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE,
-};
-
-/* This is the enumeration of the SATA PIO DATA IN started substate machine. */
-enum _scic_sds_stp_request_started_pio_substates {
-	/**
-	 * While in this state the IO request object is waiting for the TC completion
-	 * notification for the H2D Register FIS
-	 */
-	SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE,
-
-	/**
-	 * While in this state the IO request object is waiting for either a PIO Setup
-	 * FIS or a D2H register FIS.  The type of frame received is based on the
-	 * result of the prior frame and line conditions.
-	 */
-	SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE,
-
-	/**
-	 * While in this state the IO request object is waiting for a DATA frame from
-	 * the device.
-	 */
-	SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE,
-
-	/**
-	 * While in this state the IO request object is waiting to transmit the next data
-	 * frame to the device.
-	 */
-	SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE,
-};
-
-struct scic_sds_request;
-
-enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req,
-						   bool copy_rx_frame);
-enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req,
-						    u32 transfer_length,
-						    enum dma_data_direction dir);
-enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req);
-enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req);
-enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req,
-						   u32 transfer_length,
-						   enum dma_data_direction dir);
-#endif /* _SCIC_SDS_STP_REQUEST_T_ */