Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Fix race between LED device uevent and actual attributes creation
  leds-gpio: fix default state handling on OF platforms
  leds: Add Dell Business Class Netbook LED driver
  leds: Kconfig cleanup
  leds: led-class.c - Quiet boot messages
  leds: make PCI device id constant
  leds: ALIX2: Add dependency to !GPIO_CS5335

drivers/leds/Kconfig

@@ -15,6 +15,8 @@ config LEDS_CLASS
 	  This option enables the led sysfs class in /sys/class/leds.  You'll
 	  need this to do anything useful with LEDs.  If unsure, say N.
 
+if LEDS_CLASS
+
 comment "LED drivers"
 
 config LEDS_88PM860X
@@ -26,73 +28,73 @@ config LEDS_88PM860X
 
 config LEDS_ATMEL_PWM
 	tristate "LED Support using Atmel PWM outputs"
-	depends on LEDS_CLASS && ATMEL_PWM
+	depends on ATMEL_PWM
 	help
 	  This option enables support for LEDs driven using outputs
 	  of the dedicated PWM controller found on newer Atmel SOCs.
 
 config LEDS_LOCOMO
 	tristate "LED Support for Locomo device"
-	depends on LEDS_CLASS && SHARP_LOCOMO
+	depends on SHARP_LOCOMO
 	help
 	  This option enables support for the LEDs on Sharp Locomo.
 	  Zaurus models SL-5500 and SL-5600.
 
 config LEDS_MIKROTIK_RB532
 	tristate "LED Support for Mikrotik Routerboard 532"
-	depends on LEDS_CLASS && MIKROTIK_RB532
+	depends on MIKROTIK_RB532
 	help
 	  This option enables support for the so called "User LED" of
 	  Mikrotik's Routerboard 532.
 
 config LEDS_S3C24XX
 	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
-	depends on LEDS_CLASS && ARCH_S3C2410
+	depends on ARCH_S3C2410
 	help
 	  This option enables support for LEDs connected to GPIO lines
 	  on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
 
 config LEDS_AMS_DELTA
 	tristate "LED Support for the Amstrad Delta (E3)"
-	depends on LEDS_CLASS && MACH_AMS_DELTA
+	depends on MACH_AMS_DELTA
 	help
 	  This option enables support for the LEDs on Amstrad Delta (E3).
 
 config LEDS_NET48XX
 	tristate "LED Support for Soekris net48xx series Error LED"
-	depends on LEDS_CLASS && SCx200_GPIO
+	depends on SCx200_GPIO
 	help
 	  This option enables support for the Soekris net4801 and net4826 error
 	  LED.
 
 config LEDS_FSG
 	tristate "LED Support for the Freecom FSG-3"
-	depends on LEDS_CLASS && MACH_FSG
+	depends on MACH_FSG
 	help
 	  This option enables support for the LEDs on the Freecom FSG-3.
 
 config LEDS_WRAP
 	tristate "LED Support for the WRAP series LEDs"
-	depends on LEDS_CLASS && SCx200_GPIO
+	depends on SCx200_GPIO
 	help
 	  This option enables support for the PCEngines WRAP programmable LEDs.
 
 config LEDS_ALIX2
 	tristate "LED Support for ALIX.2 and ALIX.3 series"
-	depends on LEDS_CLASS && X86 && EXPERIMENTAL
+	depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
 	help
 	  This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
 	  You have to set leds-alix2.force=1 for boards with Award BIOS.
 
 config LEDS_H1940
 	tristate "LED Support for iPAQ H1940 device"
-	depends on LEDS_CLASS && ARCH_H1940
+	depends on ARCH_H1940
 	help
 	  This option enables support for the LEDs on the h1940.
 
 config LEDS_COBALT_QUBE
 	tristate "LED Support for the Cobalt Qube series front LED"
-	depends on LEDS_CLASS && MIPS_COBALT
+	depends on MIPS_COBALT
 	help
 	  This option enables support for the front LED on Cobalt Qube series
 
@@ -105,7 +107,7 @@ config LEDS_COBALT_RAQ
 
 config LEDS_SUNFIRE
 	tristate "LED support for SunFire servers."
-	depends on LEDS_CLASS && SPARC64
+	depends on SPARC64
 	select LEDS_TRIGGERS
 	help
 	  This option enables support for the Left, Middle, and Right
@@ -113,14 +115,14 @@ config LEDS_SUNFIRE
 
 config LEDS_HP6XX
 	tristate "LED Support for the HP Jornada 6xx"
-	depends on LEDS_CLASS && SH_HP6XX
+	depends on SH_HP6XX
 	help
 	  This option enables LED support for the handheld
 	  HP Jornada 620/660/680/690.
 
 config LEDS_PCA9532
 	tristate "LED driver for PCA9532 dimmer"
-	depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
+	depends on I2C && INPUT && EXPERIMENTAL
 	help
 	  This option enables support for NXP pca9532
 	  LED controller. It is generally only useful
@@ -128,7 +130,7 @@ config LEDS_PCA9532
 
 config LEDS_GPIO
 	tristate "LED Support for GPIO connected LEDs"
-	depends on LEDS_CLASS && GENERIC_GPIO
+	depends on GENERIC_GPIO
 	help
 	  This option enables support for the LEDs connected to GPIO
 	  outputs. To be useful the particular board must have LEDs
@@ -155,7 +157,7 @@ config LEDS_GPIO_OF
 
 config LEDS_LP3944
 	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
-	depends on LEDS_CLASS && I2C
+	depends on I2C
 	help
 	  This option enables support for LEDs connected to the National
 	  Semiconductor LP3944 Lighting Management Unit (LMU) also known as
@@ -166,7 +168,7 @@ config LEDS_LP3944
 
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
-	depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
+	depends on X86 && SERIO_I8042 && DMI
 	help
 	  This driver makes the mail LED accessible from userspace
 	  programs through the leds subsystem. This LED have three
@@ -196,7 +198,7 @@ config LEDS_CLEVO_MAIL
 
 config LEDS_PCA955X
 	tristate "LED Support for PCA955x I2C chips"
-	depends on LEDS_CLASS && I2C
+	depends on I2C
 	help
 	  This option enables support for LEDs connected to PCA955x
 	  LED driver chips accessed via the I2C bus.  Supported
@@ -204,54 +206,54 @@ config LEDS_PCA955X
 
 config LEDS_WM831X_STATUS
 	tristate "LED support for status LEDs on WM831x PMICs"
-	depends on LEDS_CLASS && MFD_WM831X
+	depends on MFD_WM831X
 	help
 	  This option enables support for the status LEDs of the WM831x
           series of PMICs.
 
 config LEDS_WM8350
 	tristate "LED Support for WM8350 AudioPlus PMIC"
-	depends on LEDS_CLASS && MFD_WM8350
+	depends on MFD_WM8350
 	help
 	  This option enables support for LEDs driven by the Wolfson
 	  Microelectronics WM8350 AudioPlus PMIC.
 
 config LEDS_DA903X
 	tristate "LED Support for DA9030/DA9034 PMIC"
-	depends on LEDS_CLASS && PMIC_DA903X
+	depends on PMIC_DA903X
 	help
 	  This option enables support for on-chip LED drivers found
 	  on Dialog Semiconductor DA9030/DA9034 PMICs.
 
 config LEDS_DAC124S085
 	tristate "LED Support for DAC124S085 SPI DAC"
-	depends on LEDS_CLASS && SPI
+	depends on SPI
 	help
 	  This option enables support for DAC124S085 SPI DAC from NatSemi,
 	  which can be used to control up to four LEDs.
 
 config LEDS_PWM
 	tristate "PWM driven LED Support"
-	depends on LEDS_CLASS && HAVE_PWM
+	depends on HAVE_PWM
 	help
 	  This option enables support for pwm driven LEDs
 
 config LEDS_REGULATOR
 	tristate "REGULATOR driven LED support"
-	depends on LEDS_CLASS && REGULATOR
+	depends on REGULATOR
 	help
 	  This option enables support for regulator driven LEDs.
 
 config LEDS_BD2802
 	tristate "LED driver for BD2802 RGB LED"
-	depends on LEDS_CLASS && I2C
+	depends on I2C
 	help
 	  This option enables support for BD2802GU RGB LED driver chips
 	  accessed via the I2C bus.
 
 config LEDS_INTEL_SS4200
 	tristate "LED driver for Intel NAS SS4200 series"
-	depends on LEDS_CLASS && PCI && DMI
+	depends on PCI && DMI
 	help
 	  This option enables support for the Intel SS4200 series of
 	  Network Attached Storage servers.  You may control the hard
@@ -260,7 +262,7 @@ config LEDS_INTEL_SS4200
 
 config LEDS_LT3593
 	tristate "LED driver for LT3593 controllers"
-	depends on LEDS_CLASS && GENERIC_GPIO
+	depends on GENERIC_GPIO
 	help
 	  This option enables support for LEDs driven by a Linear Technology
 	  LT3593 controller. This controller uses a special one-wire pulse
@@ -268,7 +270,7 @@ config LEDS_LT3593
 
 config LEDS_ADP5520
 	tristate "LED Support for ADP5520/ADP5501 PMIC"
-	depends on LEDS_CLASS && PMIC_ADP5520
+	depends on PMIC_ADP5520
 	help
 	  This option enables support for on-chip LED drivers found
 	  on Analog Devices ADP5520/ADP5501 PMICs.
@@ -276,7 +278,12 @@ config LEDS_ADP5520
 	  To compile this driver as a module, choose M here: the module will
 	  be called leds-adp5520.
 
-comment "LED Triggers"
+config LEDS_DELL_NETBOOKS
+	tristate "External LED on Dell Business Netbooks"
+	depends on X86 && ACPI_WMI
+	help
+	  This adds support for the Latitude 2100 and similar
+	  notebooks that have an external LED.
 
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
@@ -285,9 +292,12 @@ config LEDS_TRIGGERS
 	  These triggers allow kernel events to drive the LEDs and can
 	  be configured via sysfs. If unsure, say Y.
 
+if LEDS_TRIGGERS
+
+comment "LED Triggers"
+
 config LEDS_TRIGGER_TIMER
 	tristate "LED Timer Trigger"
-	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by a programmable timer
 	  via sysfs. Some LED hardware can be programmed to start
@@ -298,14 +308,13 @@ config LEDS_TRIGGER_TIMER
 
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
-	depends on LEDS_TRIGGERS && IDE_GD_ATA
+	depends on IDE_GD_ATA
 	help
 	  This allows LEDs to be controlled by IDE disk activity.
 	  If unsure, say Y.
 
 config LEDS_TRIGGER_HEARTBEAT
 	tristate "LED Heartbeat Trigger"
-	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by a CPU load average.
 	  The flash frequency is a hyperbolic function of the 1-minute
@@ -314,7 +323,6 @@ config LEDS_TRIGGER_HEARTBEAT
 
 config LEDS_TRIGGER_BACKLIGHT
 	tristate "LED backlight Trigger"
-	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled as a backlight device: they
 	  turn off and on when the display is blanked and unblanked.
@@ -323,7 +331,6 @@ config LEDS_TRIGGER_BACKLIGHT
 
 config LEDS_TRIGGER_GPIO
 	tristate "LED GPIO Trigger"
-	depends on LEDS_TRIGGERS
 	depends on GPIOLIB
 	help
 	  This allows LEDs to be controlled by gpio events. It's good
@@ -336,7 +343,6 @@ config LEDS_TRIGGER_GPIO
 
 config LEDS_TRIGGER_DEFAULT_ON
 	tristate "LED Default ON Trigger"
-	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be initialised in the ON state.
 	  If unsure, say Y.
@@ -344,4 +350,8 @@ config LEDS_TRIGGER_DEFAULT_ON
 comment "iptables trigger is under Netfilter config (LED target)"
 	depends on LEDS_TRIGGERS
 
+endif # LEDS_TRIGGERS
+
+endif # LEDS_CLASS
+
 endif # NEW_LEDS

drivers/leds/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
 obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
 obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
 obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
+obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o

drivers/leds/dell-led.c

@@ -0,0 +1,200 @@
+/*
+ * dell_led.c - Dell LED Driver
+ *
+ * Copyright (C) 2010 Dell Inc.
+ * Louis Davis <louis_davis@dell.com>
+ * Jim Dailey <jim_dailey@dell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/leds.h>
+
+MODULE_AUTHOR("Louis Davis/Jim Dailey");
+MODULE_DESCRIPTION("Dell LED Control Driver");
+MODULE_LICENSE("GPL");
+
+#define DELL_LED_BIOS_GUID "F6E4FE6E-909D-47cb-8BAB-C9F6F2F8D396"
+MODULE_ALIAS("wmi:" DELL_LED_BIOS_GUID);
+
+/* Error Result Codes: */
+#define INVALID_DEVICE_ID	250
+#define INVALID_PARAMETER	251
+#define INVALID_BUFFER		252
+#define INTERFACE_ERROR		253
+#define UNSUPPORTED_COMMAND	254
+#define UNSPECIFIED_ERROR	255
+
+/* Device ID */
+#define DEVICE_ID_PANEL_BACK	1
+
+/* LED Commands */
+#define CMD_LED_ON	16
+#define CMD_LED_OFF	17
+#define CMD_LED_BLINK	18
+
+struct bios_args {
+	unsigned char length;
+	unsigned char result_code;
+	unsigned char device_id;
+	unsigned char command;
+	unsigned char on_time;
+	unsigned char off_time;
+};
+
+static int dell_led_perform_fn(u8 length,
+		u8 result_code,
+		u8 device_id,
+		u8 command,
+		u8 on_time,
+		u8 off_time)
+{
+	struct bios_args *bios_return;
+	u8 return_code;
+	union acpi_object *obj;
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_buffer input;
+	acpi_status status;
+
+	struct bios_args args;
+	args.length = length;
+	args.result_code = result_code;
+	args.device_id = device_id;
+	args.command = command;
+	args.on_time = on_time;
+	args.off_time = off_time;
+
+	input.length = sizeof(struct bios_args);
+	input.pointer = &args;
+
+	status = wmi_evaluate_method(DELL_LED_BIOS_GUID,
+		1,
+		1,
+		&input,
+		&output);
+
+	if (ACPI_FAILURE(status))
+		return status;
+
+	obj = output.pointer;
+
+	if (!obj)
+		return -EINVAL;
+	else if (obj->type != ACPI_TYPE_BUFFER) {
+		kfree(obj);
+		return -EINVAL;
+	}
+
+	bios_return = ((struct bios_args *)obj->buffer.pointer);
+	return_code = bios_return->result_code;
+
+	kfree(obj);
+
+	return return_code;
+}
+
+static int led_on(void)
+{
+	return dell_led_perform_fn(3,	/* Length of command */
+		INTERFACE_ERROR,	/* Init to  INTERFACE_ERROR */
+		DEVICE_ID_PANEL_BACK,	/* Device ID */
+		CMD_LED_ON,		/* Command */
+		0,			/* not used */
+		0);			/* not used */
+}
+
+static int led_off(void)
+{
+	return dell_led_perform_fn(3,	/* Length of command */
+		INTERFACE_ERROR,	/* Init to  INTERFACE_ERROR */
+		DEVICE_ID_PANEL_BACK,	/* Device ID */
+		CMD_LED_OFF,		/* Command */
+		0,			/* not used */
+		0);			/* not used */
+}
+
+static int led_blink(unsigned char on_eighths,
+		unsigned char off_eighths)
+{
+	return dell_led_perform_fn(5,	/* Length of command */
+		INTERFACE_ERROR,	/* Init to  INTERFACE_ERROR */
+		DEVICE_ID_PANEL_BACK,	/* Device ID */
+		CMD_LED_BLINK,		/* Command */
+		on_eighths,		/* blink on in eigths of a second */
+		off_eighths);		/* blink off in eights of a second */
+}
+
+static void dell_led_set(struct led_classdev *led_cdev,
+		enum led_brightness value)
+{
+	if (value == LED_OFF)
+		led_off();
+	else
+		led_on();
+}
+
+static int dell_led_blink(struct led_classdev *led_cdev,
+		unsigned long *delay_on,
+		unsigned long *delay_off)
+{
+	unsigned long on_eighths;
+	unsigned long off_eighths;
+
+	/* The Dell LED delay is based on 125ms intervals.
+	   Need to round up to next interval. */
+
+	on_eighths = (*delay_on + 124) / 125;
+	if (0 == on_eighths)
+		on_eighths = 1;
+	if (on_eighths > 255)
+		on_eighths = 255;
+	*delay_on = on_eighths * 125;
+
+	off_eighths = (*delay_off + 124) / 125;
+	if (0 == off_eighths)
+		off_eighths = 1;
+	if (off_eighths > 255)
+		off_eighths = 255;
+	*delay_off = off_eighths * 125;
+
+	led_blink(on_eighths, off_eighths);
+
+	return 0;
+}
+
+static struct led_classdev dell_led = {
+	.name		= "dell::lid",
+	.brightness	= LED_OFF,
+	.max_brightness = 1,
+	.brightness_set = dell_led_set,
+	.blink_set	= dell_led_blink,
+	.flags		= LED_CORE_SUSPENDRESUME,
+};
+
+static int __init dell_led_init(void)
+{
+	int error = 0;
+
+	if (!wmi_has_guid(DELL_LED_BIOS_GUID))
+		return -ENODEV;
+
+	error = led_off();
+	if (error != 0)
+		return -ENODEV;
+
+	return led_classdev_register(NULL, &dell_led);
+}
+
+static void __exit dell_led_exit(void)
+{
+	led_classdev_unregister(&dell_led);
+
+	led_off();
+}
+
+module_init(dell_led_init);
+module_exit(dell_led_exit);

drivers/leds/led-class.c

@@ -72,11 +72,14 @@ static ssize_t led_max_brightness_show(struct device *dev,
 	return sprintf(buf, "%u\n", led_cdev->max_brightness);
 }
 
-static DEVICE_ATTR(brightness, 0644, led_brightness_show, led_brightness_store);
-static DEVICE_ATTR(max_brightness, 0444, led_max_brightness_show, NULL);
+static struct device_attribute led_class_attrs[] = {
+	__ATTR(brightness, 0644, led_brightness_show, led_brightness_store),
+	__ATTR(max_brightness, 0644, led_max_brightness_show, NULL),
 #ifdef CONFIG_LEDS_TRIGGERS
-static DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
+	__ATTR(trigger, 0644, led_trigger_show, led_trigger_store),
 #endif
+	__ATTR_NULL,
+};
 
 /**
  * led_classdev_suspend - suspend an led_classdev.
@@ -127,18 +130,11 @@ static int led_resume(struct device *dev)
  */
 int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 {
-	int rc;
-
 	led_cdev->dev = device_create(leds_class, parent, 0, led_cdev,
 				      "%s", led_cdev->name);
 	if (IS_ERR(led_cdev->dev))
 		return PTR_ERR(led_cdev->dev);
 
-	/* register the attributes */
-	rc = device_create_file(led_cdev->dev, &dev_attr_brightness);
-	if (rc)
-		goto err_out;
-
 #ifdef CONFIG_LEDS_TRIGGERS
 	init_rwsem(&led_cdev->trigger_lock);
 #endif
@@ -150,36 +146,18 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 	if (!led_cdev->max_brightness)
 		led_cdev->max_brightness = LED_FULL;
 
-	rc = device_create_file(led_cdev->dev, &dev_attr_max_brightness);
-	if (rc)
-		goto err_out_attr_max;
-
 	led_update_brightness(led_cdev);
 
 #ifdef CONFIG_LEDS_TRIGGERS
-	rc = device_create_file(led_cdev->dev, &dev_attr_trigger);
-	if (rc)
-		goto err_out_led_list;
-
 	led_trigger_set_default(led_cdev);
 #endif
 
-	printk(KERN_INFO "Registered led device: %s\n",
+	printk(KERN_DEBUG "Registered led device: %s\n",
 			led_cdev->name);
 
 	return 0;
-
-#ifdef CONFIG_LEDS_TRIGGERS
-err_out_led_list:
-	device_remove_file(led_cdev->dev, &dev_attr_max_brightness);
-#endif
-err_out_attr_max:
-	device_remove_file(led_cdev->dev, &dev_attr_brightness);
-	list_del(&led_cdev->node);
-err_out:
-	device_unregister(led_cdev->dev);
-	return rc;
 }
+
 EXPORT_SYMBOL_GPL(led_classdev_register);
 
 /**
@@ -190,10 +168,7 @@ EXPORT_SYMBOL_GPL(led_classdev_register);
  */
 void led_classdev_unregister(struct led_classdev *led_cdev)
 {
-	device_remove_file(led_cdev->dev, &dev_attr_max_brightness);
-	device_remove_file(led_cdev->dev, &dev_attr_brightness);
 #ifdef CONFIG_LEDS_TRIGGERS
-	device_remove_file(led_cdev->dev, &dev_attr_trigger);
 	down_write(&led_cdev->trigger_lock);
 	if (led_cdev->trigger)
 		led_trigger_set(led_cdev, NULL);
@@ -215,6 +190,7 @@ static int __init leds_init(void)
 		return PTR_ERR(leds_class);
 	leds_class->suspend = led_suspend;
 	leds_class->resume = led_resume;
+	leds_class->dev_attrs = led_class_attrs;
 	return 0;
 }
 

drivers/leds/leds-gpio.c

@@ -211,7 +211,6 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
 					const struct of_device_id *match)
 {
 	struct device_node *np = ofdev->node, *child;
-	struct gpio_led led;
 	struct gpio_led_of_platform_data *pdata;
 	int count = 0, ret;
 
@@ -226,8 +225,8 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
 	if (!pdata)
 		return -ENOMEM;
 
-	memset(&led, 0, sizeof(led));
 	for_each_child_of_node(np, child) {
+		struct gpio_led led = {};
 		enum of_gpio_flags flags;
 		const char *state;
 

drivers/leds/leds-ss4200.c

@@ -63,7 +63,7 @@ MODULE_LICENSE("GPL");
 /*
  * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
  */
-static struct pci_device_id ich7_lpc_pci_id[] =
+static const struct pci_device_id ich7_lpc_pci_id[] =
 {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },