|
|
@@ -1,602 +0,0 @@
|
|
|
-/*
|
|
|
- * Intel Wireless WiMAX Connection 2400m
|
|
|
- * Linux driver model glue for the SDIO device, reset & fw upload
|
|
|
- *
|
|
|
- *
|
|
|
- * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com>
|
|
|
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
|
|
|
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
|
|
|
- * Yanir Lubetkin <yanirx.lubetkin@intel.com>
|
|
|
- *
|
|
|
- * This program is free software; you can redistribute it and/or
|
|
|
- * modify it under the terms of the GNU General Public License version
|
|
|
- * 2 as published by the Free Software Foundation.
|
|
|
- *
|
|
|
- * This program is distributed in the hope that it will be useful,
|
|
|
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
- * GNU General Public License for more details.
|
|
|
- *
|
|
|
- * You should have received a copy of the GNU General Public License
|
|
|
- * along with this program; if not, write to the Free Software
|
|
|
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
|
- * 02110-1301, USA.
|
|
|
- *
|
|
|
- *
|
|
|
- * See i2400m-sdio.h for a general description of this driver.
|
|
|
- *
|
|
|
- * This file implements driver model glue, and hook ups for the
|
|
|
- * generic driver to implement the bus-specific functions (device
|
|
|
- * communication setup/tear down, firmware upload and resetting).
|
|
|
- *
|
|
|
- * ROADMAP
|
|
|
- *
|
|
|
- * i2400m_probe()
|
|
|
- * alloc_netdev()
|
|
|
- * i2400ms_netdev_setup()
|
|
|
- * i2400ms_init()
|
|
|
- * i2400m_netdev_setup()
|
|
|
- * i2400ms_enable_function()
|
|
|
- * i2400m_setup()
|
|
|
- *
|
|
|
- * i2400m_remove()
|
|
|
- * i2400m_release()
|
|
|
- * free_netdev(net_dev)
|
|
|
- *
|
|
|
- * i2400ms_bus_reset() Called by i2400m_reset
|
|
|
- * __i2400ms_reset()
|
|
|
- * __i2400ms_send_barker()
|
|
|
- */
|
|
|
-
|
|
|
-#include <linux/slab.h>
|
|
|
-#include <linux/debugfs.h>
|
|
|
-#include <linux/mmc/sdio_ids.h>
|
|
|
-#include <linux/mmc/sdio.h>
|
|
|
-#include <linux/mmc/sdio_func.h>
|
|
|
-#include "i2400m-sdio.h"
|
|
|
-#include <linux/wimax/i2400m.h>
|
|
|
-#include <linux/module.h>
|
|
|
-
|
|
|
-#define D_SUBMODULE main
|
|
|
-#include "sdio-debug-levels.h"
|
|
|
-
|
|
|
-/* IOE WiMAX function timeout in seconds */
|
|
|
-static int ioe_timeout = 2;
|
|
|
-module_param(ioe_timeout, int, 0);
|
|
|
-
|
|
|
-static char i2400ms_debug_params[128];
|
|
|
-module_param_string(debug, i2400ms_debug_params, sizeof(i2400ms_debug_params),
|
|
|
- 0644);
|
|
|
-MODULE_PARM_DESC(debug,
|
|
|
- "String of space-separated NAME:VALUE pairs, where NAMEs "
|
|
|
- "are the different debug submodules and VALUE are the "
|
|
|
- "initial debug value to set.");
|
|
|
-
|
|
|
-/* Our firmware file name list */
|
|
|
-static const char *i2400ms_bus_fw_names[] = {
|
|
|
-#define I2400MS_FW_FILE_NAME "i2400m-fw-sdio-1.3.sbcf"
|
|
|
- I2400MS_FW_FILE_NAME,
|
|
|
- NULL
|
|
|
-};
|
|
|
-
|
|
|
-
|
|
|
-static const struct i2400m_poke_table i2400ms_pokes[] = {
|
|
|
- I2400M_FW_POKE(0x6BE260, 0x00000088),
|
|
|
- I2400M_FW_POKE(0x080550, 0x00000005),
|
|
|
- I2400M_FW_POKE(0xAE0000, 0x00000000),
|
|
|
- I2400M_FW_POKE(0x000000, 0x00000000), /* MUST be 0 terminated or bad
|
|
|
- * things will happen */
|
|
|
-};
|
|
|
-
|
|
|
-/*
|
|
|
- * Enable the SDIO function
|
|
|
- *
|
|
|
- * Tries to enable the SDIO function; might fail if it is still not
|
|
|
- * ready (in some hardware, the SDIO WiMAX function is only enabled
|
|
|
- * when we ask it to explicitly doing). Tries until a timeout is
|
|
|
- * reached.
|
|
|
- *
|
|
|
- * The @maxtries argument indicates how many times (at most) it should
|
|
|
- * be tried to enable the function. 0 means forever. This acts along
|
|
|
- * with the timeout (ie: it'll stop trying as soon as the maximum
|
|
|
- * number of tries is reached _or_ as soon as the timeout is reached).
|
|
|
- *
|
|
|
- * The reverse of this is...sdio_disable_function()
|
|
|
- *
|
|
|
- * Returns: 0 if the SDIO function was enabled, < 0 errno code on
|
|
|
- * error (-ENODEV when it was unable to enable the function).
|
|
|
- */
|
|
|
-static
|
|
|
-int i2400ms_enable_function(struct i2400ms *i2400ms, unsigned maxtries)
|
|
|
-{
|
|
|
- struct sdio_func *func = i2400ms->func;
|
|
|
- u64 timeout;
|
|
|
- int err;
|
|
|
- struct device *dev = &func->dev;
|
|
|
- unsigned tries = 0;
|
|
|
-
|
|
|
- d_fnstart(3, dev, "(func %p)\n", func);
|
|
|
- /* Setup timeout (FIXME: This needs to read the CIS table to
|
|
|
- * get a real timeout) and then wait for the device to signal
|
|
|
- * it is ready */
|
|
|
- timeout = get_jiffies_64() + ioe_timeout * HZ;
|
|
|
- err = -ENODEV;
|
|
|
- while (err != 0 && time_before64(get_jiffies_64(), timeout)) {
|
|
|
- sdio_claim_host(func);
|
|
|
- /*
|
|
|
- * There is a sillicon bug on the IWMC3200, where the
|
|
|
- * IOE timeout will cause problems on Moorestown
|
|
|
- * platforms (system hang). We explicitly overwrite
|
|
|
- * func->enable_timeout here to work around the issue.
|
|
|
- */
|
|
|
- if (i2400ms->iwmc3200)
|
|
|
- func->enable_timeout = IWMC3200_IOR_TIMEOUT;
|
|
|
- err = sdio_enable_func(func);
|
|
|
- if (0 == err) {
|
|
|
- sdio_release_host(func);
|
|
|
- d_printf(2, dev, "SDIO function enabled\n");
|
|
|
- goto function_enabled;
|
|
|
- }
|
|
|
- d_printf(2, dev, "SDIO function failed to enable: %d\n", err);
|
|
|
- sdio_release_host(func);
|
|
|
- if (maxtries > 0 && ++tries >= maxtries) {
|
|
|
- err = -ETIME;
|
|
|
- break;
|
|
|
- }
|
|
|
- msleep(I2400MS_INIT_SLEEP_INTERVAL);
|
|
|
- }
|
|
|
- /* If timed out, device is not there yet -- get -ENODEV so
|
|
|
- * the device driver core will retry later on. */
|
|
|
- if (err == -ETIME) {
|
|
|
- dev_err(dev, "Can't enable WiMAX function; "
|
|
|
- " has the function been enabled?\n");
|
|
|
- err = -ENODEV;
|
|
|
- }
|
|
|
-function_enabled:
|
|
|
- d_fnend(3, dev, "(func %p) = %d\n", func, err);
|
|
|
- return err;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Setup minimal device communication infrastructure needed to at
|
|
|
- * least be able to update the firmware.
|
|
|
- *
|
|
|
- * Note the ugly trick: if we are in the probe path
|
|
|
- * (i2400ms->debugfs_dentry == NULL), we only retry function
|
|
|
- * enablement one, to avoid racing with the iwmc3200 top controller.
|
|
|
- */
|
|
|
-static
|
|
|
-int i2400ms_bus_setup(struct i2400m *i2400m)
|
|
|
-{
|
|
|
- int result;
|
|
|
- struct i2400ms *i2400ms =
|
|
|
- container_of(i2400m, struct i2400ms, i2400m);
|
|
|
- struct device *dev = i2400m_dev(i2400m);
|
|
|
- struct sdio_func *func = i2400ms->func;
|
|
|
- int retries;
|
|
|
-
|
|
|
- sdio_claim_host(func);
|
|
|
- result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
|
|
|
- sdio_release_host(func);
|
|
|
- if (result < 0) {
|
|
|
- dev_err(dev, "Failed to set block size: %d\n", result);
|
|
|
- goto error_set_blk_size;
|
|
|
- }
|
|
|
-
|
|
|
- if (i2400ms->iwmc3200 && i2400ms->debugfs_dentry == NULL)
|
|
|
- retries = 1;
|
|
|
- else
|
|
|
- retries = 0;
|
|
|
- result = i2400ms_enable_function(i2400ms, retries);
|
|
|
- if (result < 0) {
|
|
|
- dev_err(dev, "Cannot enable SDIO function: %d\n", result);
|
|
|
- goto error_func_enable;
|
|
|
- }
|
|
|
-
|
|
|
- result = i2400ms_tx_setup(i2400ms);
|
|
|
- if (result < 0)
|
|
|
- goto error_tx_setup;
|
|
|
- result = i2400ms_rx_setup(i2400ms);
|
|
|
- if (result < 0)
|
|
|
- goto error_rx_setup;
|
|
|
- return 0;
|
|
|
-
|
|
|
-error_rx_setup:
|
|
|
- i2400ms_tx_release(i2400ms);
|
|
|
-error_tx_setup:
|
|
|
- sdio_claim_host(func);
|
|
|
- sdio_disable_func(func);
|
|
|
- sdio_release_host(func);
|
|
|
-error_func_enable:
|
|
|
-error_set_blk_size:
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Tear down minimal device communication infrastructure needed to at
|
|
|
- * least be able to update the firmware.
|
|
|
- */
|
|
|
-static
|
|
|
-void i2400ms_bus_release(struct i2400m *i2400m)
|
|
|
-{
|
|
|
- struct i2400ms *i2400ms =
|
|
|
- container_of(i2400m, struct i2400ms, i2400m);
|
|
|
- struct sdio_func *func = i2400ms->func;
|
|
|
-
|
|
|
- i2400ms_rx_release(i2400ms);
|
|
|
- i2400ms_tx_release(i2400ms);
|
|
|
- sdio_claim_host(func);
|
|
|
- sdio_disable_func(func);
|
|
|
- sdio_release_host(func);
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Setup driver resources needed to communicate with the device
|
|
|
- *
|
|
|
- * The fw needs some time to settle, and it was just uploaded,
|
|
|
- * so give it a break first. I'd prefer to just wait for the device to
|
|
|
- * send something, but seems the poking we do to enable SDIO stuff
|
|
|
- * interferes with it, so just give it a break before starting...
|
|
|
- */
|
|
|
-static
|
|
|
-int i2400ms_bus_dev_start(struct i2400m *i2400m)
|
|
|
-{
|
|
|
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
|
|
|
- struct sdio_func *func = i2400ms->func;
|
|
|
- struct device *dev = &func->dev;
|
|
|
-
|
|
|
- d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
|
|
|
- msleep(200);
|
|
|
- d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, 0);
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Sends a barker buffer to the device
|
|
|
- *
|
|
|
- * This helper will allocate a kmalloced buffer and use it to transmit
|
|
|
- * (then free it). Reason for this is that the SDIO host controller
|
|
|
- * expects alignment (unknown exactly which) which the stack won't
|
|
|
- * really provide and certain arches/host-controller combinations
|
|
|
- * cannot use stack/vmalloc/text areas for DMA transfers.
|
|
|
- */
|
|
|
-static
|
|
|
-int __i2400ms_send_barker(struct i2400ms *i2400ms,
|
|
|
- const __le32 *barker, size_t barker_size)
|
|
|
-{
|
|
|
- int ret;
|
|
|
- struct sdio_func *func = i2400ms->func;
|
|
|
- struct device *dev = &func->dev;
|
|
|
- void *buffer;
|
|
|
-
|
|
|
- ret = -ENOMEM;
|
|
|
- buffer = kmalloc(I2400MS_BLK_SIZE, GFP_KERNEL);
|
|
|
- if (buffer == NULL)
|
|
|
- goto error_kzalloc;
|
|
|
-
|
|
|
- memcpy(buffer, barker, barker_size);
|
|
|
- sdio_claim_host(func);
|
|
|
- ret = sdio_memcpy_toio(func, 0, buffer, I2400MS_BLK_SIZE);
|
|
|
- sdio_release_host(func);
|
|
|
-
|
|
|
- if (ret < 0)
|
|
|
- d_printf(0, dev, "E: barker error: %d\n", ret);
|
|
|
-
|
|
|
- kfree(buffer);
|
|
|
-error_kzalloc:
|
|
|
- return ret;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Reset a device at different levels (warm, cold or bus)
|
|
|
- *
|
|
|
- * @i2400ms: device descriptor
|
|
|
- * @reset_type: soft, warm or bus reset (I2400M_RT_WARM/SOFT/BUS)
|
|
|
- *
|
|
|
- * FIXME: not tested -- need to confirm expected effects
|
|
|
- *
|
|
|
- * Warm and cold resets get an SDIO reset if they fail (unimplemented)
|
|
|
- *
|
|
|
- * Warm reset:
|
|
|
- *
|
|
|
- * The device will be fully reset internally, but won't be
|
|
|
- * disconnected from the bus (so no reenumeration will
|
|
|
- * happen). Firmware upload will be necessary.
|
|
|
- *
|
|
|
- * The device will send a reboot barker that will trigger the driver
|
|
|
- * to reinitialize the state via __i2400m_dev_reset_handle.
|
|
|
- *
|
|
|
- *
|
|
|
- * Cold and bus reset:
|
|
|
- *
|
|
|
- * The device will be fully reset internally, disconnected from the
|
|
|
- * bus an a reenumeration will happen. Firmware upload will be
|
|
|
- * necessary. Thus, we don't do any locking or struct
|
|
|
- * reinitialization, as we are going to be fully disconnected and
|
|
|
- * reenumerated.
|
|
|
- *
|
|
|
- * Note we need to return -ENODEV if a warm reset was requested and we
|
|
|
- * had to resort to a bus reset. See i2400m_op_reset(), wimax_reset()
|
|
|
- * and wimax_dev->op_reset.
|
|
|
- *
|
|
|
- * WARNING: no driver state saved/fixed
|
|
|
- */
|
|
|
-static
|
|
|
-int i2400ms_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
|
|
|
-{
|
|
|
- int result = 0;
|
|
|
- struct i2400ms *i2400ms =
|
|
|
- container_of(i2400m, struct i2400ms, i2400m);
|
|
|
- struct device *dev = i2400m_dev(i2400m);
|
|
|
- static const __le32 i2400m_WARM_BOOT_BARKER[4] = {
|
|
|
- cpu_to_le32(I2400M_WARM_RESET_BARKER),
|
|
|
- cpu_to_le32(I2400M_WARM_RESET_BARKER),
|
|
|
- cpu_to_le32(I2400M_WARM_RESET_BARKER),
|
|
|
- cpu_to_le32(I2400M_WARM_RESET_BARKER),
|
|
|
- };
|
|
|
- static const __le32 i2400m_COLD_BOOT_BARKER[4] = {
|
|
|
- cpu_to_le32(I2400M_COLD_RESET_BARKER),
|
|
|
- cpu_to_le32(I2400M_COLD_RESET_BARKER),
|
|
|
- cpu_to_le32(I2400M_COLD_RESET_BARKER),
|
|
|
- cpu_to_le32(I2400M_COLD_RESET_BARKER),
|
|
|
- };
|
|
|
-
|
|
|
- if (rt == I2400M_RT_WARM)
|
|
|
- result = __i2400ms_send_barker(i2400ms, i2400m_WARM_BOOT_BARKER,
|
|
|
- sizeof(i2400m_WARM_BOOT_BARKER));
|
|
|
- else if (rt == I2400M_RT_COLD)
|
|
|
- result = __i2400ms_send_barker(i2400ms, i2400m_COLD_BOOT_BARKER,
|
|
|
- sizeof(i2400m_COLD_BOOT_BARKER));
|
|
|
- else if (rt == I2400M_RT_BUS) {
|
|
|
-do_bus_reset:
|
|
|
-
|
|
|
- i2400ms_bus_release(i2400m);
|
|
|
-
|
|
|
- /* Wait for the device to settle */
|
|
|
- msleep(40);
|
|
|
-
|
|
|
- result = i2400ms_bus_setup(i2400m);
|
|
|
- } else
|
|
|
- BUG();
|
|
|
- if (result < 0 && rt != I2400M_RT_BUS) {
|
|
|
- dev_err(dev, "%s reset failed (%d); trying SDIO reset\n",
|
|
|
- rt == I2400M_RT_WARM ? "warm" : "cold", result);
|
|
|
- rt = I2400M_RT_BUS;
|
|
|
- goto do_bus_reset;
|
|
|
- }
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-static
|
|
|
-void i2400ms_netdev_setup(struct net_device *net_dev)
|
|
|
-{
|
|
|
- struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
|
|
|
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
|
|
|
- i2400ms_init(i2400ms);
|
|
|
- i2400m_netdev_setup(net_dev);
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/*
|
|
|
- * Debug levels control; see debug.h
|
|
|
- */
|
|
|
-struct d_level D_LEVEL[] = {
|
|
|
- D_SUBMODULE_DEFINE(main),
|
|
|
- D_SUBMODULE_DEFINE(tx),
|
|
|
- D_SUBMODULE_DEFINE(rx),
|
|
|
- D_SUBMODULE_DEFINE(fw),
|
|
|
-};
|
|
|
-size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
|
|
|
-
|
|
|
-
|
|
|
-#define __debugfs_register(prefix, name, parent) \
|
|
|
-do { \
|
|
|
- result = d_level_register_debugfs(prefix, name, parent); \
|
|
|
- if (result < 0) \
|
|
|
- goto error; \
|
|
|
-} while (0)
|
|
|
-
|
|
|
-
|
|
|
-static
|
|
|
-int i2400ms_debugfs_add(struct i2400ms *i2400ms)
|
|
|
-{
|
|
|
- int result;
|
|
|
- struct dentry *dentry = i2400ms->i2400m.wimax_dev.debugfs_dentry;
|
|
|
-
|
|
|
- dentry = debugfs_create_dir("i2400m-sdio", dentry);
|
|
|
- result = PTR_ERR(dentry);
|
|
|
- if (IS_ERR(dentry)) {
|
|
|
- if (result == -ENODEV)
|
|
|
- result = 0; /* No debugfs support */
|
|
|
- goto error;
|
|
|
- }
|
|
|
- i2400ms->debugfs_dentry = dentry;
|
|
|
- __debugfs_register("dl_", main, dentry);
|
|
|
- __debugfs_register("dl_", tx, dentry);
|
|
|
- __debugfs_register("dl_", rx, dentry);
|
|
|
- __debugfs_register("dl_", fw, dentry);
|
|
|
-
|
|
|
- return 0;
|
|
|
-
|
|
|
-error:
|
|
|
- debugfs_remove_recursive(i2400ms->debugfs_dentry);
|
|
|
- i2400ms->debugfs_dentry = NULL;
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-static struct device_type i2400ms_type = {
|
|
|
- .name = "wimax",
|
|
|
-};
|
|
|
-
|
|
|
-/*
|
|
|
- * Probe a i2400m interface and register it
|
|
|
- *
|
|
|
- * @func: SDIO function
|
|
|
- * @id: SDIO device ID
|
|
|
- * @returns: 0 if ok, < 0 errno code on error.
|
|
|
- *
|
|
|
- * Alloc a net device, initialize the bus-specific details and then
|
|
|
- * calls the bus-generic initialization routine. That will register
|
|
|
- * the wimax and netdev devices, upload the firmware [using
|
|
|
- * _bus_bm_*()], call _bus_dev_start() to finalize the setup of the
|
|
|
- * communication with the device and then will start to talk to it to
|
|
|
- * finnish setting it up.
|
|
|
- *
|
|
|
- * Initialization is tricky; some instances of the hw are packed with
|
|
|
- * others in a way that requires a third driver that enables the WiMAX
|
|
|
- * function. In those cases, we can't enable the SDIO function and
|
|
|
- * we'll return with -ENODEV. When the driver that enables the WiMAX
|
|
|
- * function does its thing, it has to do a bus_rescan_devices() on the
|
|
|
- * SDIO bus so this driver is called again to enumerate the WiMAX
|
|
|
- * function.
|
|
|
- */
|
|
|
-static
|
|
|
-int i2400ms_probe(struct sdio_func *func,
|
|
|
- const struct sdio_device_id *id)
|
|
|
-{
|
|
|
- int result;
|
|
|
- struct net_device *net_dev;
|
|
|
- struct device *dev = &func->dev;
|
|
|
- struct i2400m *i2400m;
|
|
|
- struct i2400ms *i2400ms;
|
|
|
-
|
|
|
- /* Allocate instance [calls i2400m_netdev_setup() on it]. */
|
|
|
- result = -ENOMEM;
|
|
|
- net_dev = alloc_netdev(sizeof(*i2400ms), "wmx%d",
|
|
|
- i2400ms_netdev_setup);
|
|
|
- if (net_dev == NULL) {
|
|
|
- dev_err(dev, "no memory for network device instance\n");
|
|
|
- goto error_alloc_netdev;
|
|
|
- }
|
|
|
- SET_NETDEV_DEV(net_dev, dev);
|
|
|
- SET_NETDEV_DEVTYPE(net_dev, &i2400ms_type);
|
|
|
- i2400m = net_dev_to_i2400m(net_dev);
|
|
|
- i2400ms = container_of(i2400m, struct i2400ms, i2400m);
|
|
|
- i2400m->wimax_dev.net_dev = net_dev;
|
|
|
- i2400ms->func = func;
|
|
|
- sdio_set_drvdata(func, i2400ms);
|
|
|
-
|
|
|
- i2400m->bus_tx_block_size = I2400MS_BLK_SIZE;
|
|
|
- /*
|
|
|
- * Room required in the TX queue for SDIO message to accommodate
|
|
|
- * a smallest payload while allocating header space is 224 bytes,
|
|
|
- * which is the smallest message size(the block size 256 bytes)
|
|
|
- * minus the smallest message header size(32 bytes).
|
|
|
- */
|
|
|
- i2400m->bus_tx_room_min = I2400MS_BLK_SIZE - I2400M_PL_ALIGN * 2;
|
|
|
- i2400m->bus_pl_size_max = I2400MS_PL_SIZE_MAX;
|
|
|
- i2400m->bus_setup = i2400ms_bus_setup;
|
|
|
- i2400m->bus_dev_start = i2400ms_bus_dev_start;
|
|
|
- i2400m->bus_dev_stop = NULL;
|
|
|
- i2400m->bus_release = i2400ms_bus_release;
|
|
|
- i2400m->bus_tx_kick = i2400ms_bus_tx_kick;
|
|
|
- i2400m->bus_reset = i2400ms_bus_reset;
|
|
|
- /* The iwmc3200-wimax sometimes requires the driver to try
|
|
|
- * hard when we paint it into a corner. */
|
|
|
- i2400m->bus_bm_retries = I2400M_SDIO_BOOT_RETRIES;
|
|
|
- i2400m->bus_bm_cmd_send = i2400ms_bus_bm_cmd_send;
|
|
|
- i2400m->bus_bm_wait_for_ack = i2400ms_bus_bm_wait_for_ack;
|
|
|
- i2400m->bus_fw_names = i2400ms_bus_fw_names;
|
|
|
- i2400m->bus_bm_mac_addr_impaired = 1;
|
|
|
- i2400m->bus_bm_pokes_table = &i2400ms_pokes[0];
|
|
|
-
|
|
|
- switch (func->device) {
|
|
|
- case SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX:
|
|
|
- case SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5:
|
|
|
- i2400ms->iwmc3200 = 1;
|
|
|
- break;
|
|
|
- default:
|
|
|
- i2400ms->iwmc3200 = 0;
|
|
|
- }
|
|
|
-
|
|
|
- result = i2400m_setup(i2400m, I2400M_BRI_NO_REBOOT);
|
|
|
- if (result < 0) {
|
|
|
- dev_err(dev, "cannot setup device: %d\n", result);
|
|
|
- goto error_setup;
|
|
|
- }
|
|
|
-
|
|
|
- result = i2400ms_debugfs_add(i2400ms);
|
|
|
- if (result < 0) {
|
|
|
- dev_err(dev, "cannot create SDIO debugfs: %d\n",
|
|
|
- result);
|
|
|
- goto error_debugfs_add;
|
|
|
- }
|
|
|
- return 0;
|
|
|
-
|
|
|
-error_debugfs_add:
|
|
|
- i2400m_release(i2400m);
|
|
|
-error_setup:
|
|
|
- sdio_set_drvdata(func, NULL);
|
|
|
- free_netdev(net_dev);
|
|
|
-error_alloc_netdev:
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-static
|
|
|
-void i2400ms_remove(struct sdio_func *func)
|
|
|
-{
|
|
|
- struct device *dev = &func->dev;
|
|
|
- struct i2400ms *i2400ms = sdio_get_drvdata(func);
|
|
|
- struct i2400m *i2400m = &i2400ms->i2400m;
|
|
|
- struct net_device *net_dev = i2400m->wimax_dev.net_dev;
|
|
|
-
|
|
|
- d_fnstart(3, dev, "SDIO func %p\n", func);
|
|
|
- debugfs_remove_recursive(i2400ms->debugfs_dentry);
|
|
|
- i2400ms->debugfs_dentry = NULL;
|
|
|
- i2400m_release(i2400m);
|
|
|
- sdio_set_drvdata(func, NULL);
|
|
|
- free_netdev(net_dev);
|
|
|
- d_fnend(3, dev, "SDIO func %p\n", func);
|
|
|
-}
|
|
|
-
|
|
|
-static
|
|
|
-const struct sdio_device_id i2400ms_sdio_ids[] = {
|
|
|
- /* Intel: i2400m WiMAX (iwmc3200) over SDIO */
|
|
|
- { SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
|
|
|
- SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX) },
|
|
|
- { SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
|
|
|
- SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5) },
|
|
|
- { /* end: all zeroes */ },
|
|
|
-};
|
|
|
-MODULE_DEVICE_TABLE(sdio, i2400ms_sdio_ids);
|
|
|
-
|
|
|
-
|
|
|
-static
|
|
|
-struct sdio_driver i2400m_sdio_driver = {
|
|
|
- .name = KBUILD_MODNAME,
|
|
|
- .probe = i2400ms_probe,
|
|
|
- .remove = i2400ms_remove,
|
|
|
- .id_table = i2400ms_sdio_ids,
|
|
|
-};
|
|
|
-
|
|
|
-
|
|
|
-static
|
|
|
-int __init i2400ms_driver_init(void)
|
|
|
-{
|
|
|
- d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400ms_debug_params,
|
|
|
- "i2400m_sdio.debug");
|
|
|
- return sdio_register_driver(&i2400m_sdio_driver);
|
|
|
-}
|
|
|
-module_init(i2400ms_driver_init);
|
|
|
-
|
|
|
-
|
|
|
-static
|
|
|
-void __exit i2400ms_driver_exit(void)
|
|
|
-{
|
|
|
- sdio_unregister_driver(&i2400m_sdio_driver);
|
|
|
-}
|
|
|
-module_exit(i2400ms_driver_exit);
|
|
|
-
|
|
|
-
|
|
|
-MODULE_AUTHOR("Intel Corporation <linux-wimax@intel.com>");
|
|
|
-MODULE_DESCRIPTION("Intel 2400M WiMAX networking for SDIO");
|
|
|
-MODULE_LICENSE("GPL");
|
|
|
-MODULE_FIRMWARE(I2400MS_FW_FILE_NAME);
|
John W. Linville