ARM: tegra: fix sort order of USB PHY nodes

The USB PHY nodes are all grouped together rather than being sorted based
on reg address like all other nodes fix this.

I apologize for the churn; I should have noticed this during review of the
patches that caused this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

arch/arm/boot/dts/tegra20.dtsi

@@ -442,31 +442,6 @@
 		#size-cells = <0>;
 	};
 
-	phy1: usb-phy@c5000400 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5000400 0x3c00>;
-		phy_type = "utmi";
-		nvidia,has-legacy-mode;
-		clocks = <&tegra_car 22>, <&tegra_car 127>;
-		clock-names = "phy", "pll_u";
-	};
-
-	phy2: usb-phy@c5004400 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5004400 0x3c00>;
-		phy_type = "ulpi";
-		clocks = <&tegra_car 94>, <&tegra_car 127>;
-		clock-names = "phy", "pll_u";
-	};
-
-	phy3: usb-phy@c5008400 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5008400 0x3C00>;
-		phy_type = "utmi";
-		clocks = <&tegra_car 22>, <&tegra_car 127>;
-		clock-names = "phy", "pll_u";
-	};
-
 	usb@c5000000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5000000 0x4000>;
@@ -479,6 +454,15 @@
 		status = "disabled";
 	};
 
+	phy1: usb-phy@c5000400 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5000400 0x3c00>;
+		phy_type = "utmi";
+		nvidia,has-legacy-mode;
+		clocks = <&tegra_car 22>, <&tegra_car 127>;
+		clock-names = "phy", "pll_u";
+	};
+
 	usb@c5004000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5004000 0x4000>;
@@ -489,6 +473,14 @@
 		status = "disabled";
 	};
 
+	phy2: usb-phy@c5004400 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5004400 0x3c00>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car 94>, <&tegra_car 127>;
+		clock-names = "phy", "pll_u";
+	};
+
 	usb@c5008000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5008000 0x4000>;
@@ -499,6 +491,14 @@
 		status = "disabled";
 	};
 
+	phy3: usb-phy@c5008400 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5008400 0x3c00>;
+		phy_type = "utmi";
+		clocks = <&tegra_car 22>, <&tegra_car 127>;
+		clock-names = "phy", "pll_u";
+	};
+
 	sdhci@c8000000 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000000 0x200>;