sata_nv: enable hotplug interrupt and fix some readl/readw mismatches

We already have code that handles hotplug interrupt indications in ADMA
mode, this turns on the control flag that actually enables these interrupts.
Also fixes some cases in the same functions where a 16-bit register was read
using a readl instead of a readw.

Signed-off-by: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/ata/sata_nv.c

@@ -1034,14 +1034,15 @@ static int nv_adma_port_start(struct ata_port *ap)
 
 	/* clear GO for register mode, enable interrupt */
 	tmp = readw(mmio + NV_ADMA_CTL);
-	writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+	writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+		 NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
 
 	tmp = readw(mmio + NV_ADMA_CTL);
 	writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 	udelay(1);
 	writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 
 	return 0;
 }
@@ -1093,14 +1094,15 @@ static int nv_adma_port_resume(struct ata_port *ap)
 
 	/* clear GO for register mode, enable interrupt */
 	tmp = readw(mmio + NV_ADMA_CTL);
-	writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+	writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+		 NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
 
 	tmp = readw(mmio + NV_ADMA_CTL);
 	writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 	udelay(1);
 	writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 
 	return 0;
 }
@@ -1491,10 +1493,10 @@ static void nv_adma_error_handler(struct ata_port *ap)
 		/* Reset channel */
 		tmp = readw(mmio + NV_ADMA_CTL);
 		writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-		readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+		readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 		udelay(1);
 		writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-		readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+		readw( mmio + NV_ADMA_CTL );	/* flush posted write */
 	}
 
 	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,