drm/i915: add pipe_config->has_pch_encoder

This is used way too often in the enable/disable paths. And will
be even more useful in the future.

Note that correct semantics of this change highly depend upon
correct updating of intel_crtc->config: Like with all other
modeset state, we need to call ->disable with the old config,
but ->mode_set and ->enable with the new config.

v2: Do not yet use the flag in the ->disable callbacks - atm we don't
yet have support for the information stored in the pipe_config in the
hw state readout code, so this will be wrong at boot-up/resume.

v3: Rebased on top of the hdmi/dp ddi encoder merging.

v4: Fixup stupid rebase error which lead to a NULL vfunc deref.

v5: On haswell the VGA port is on the PCH!

v6: s/IS_HASWELL/HAS_DDI/, spotted by Paulo Zanoni. Also add a missing
parameter name in a function declaration.

v7: Don't forget to git add ...

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_crt.c

@@ -206,10 +206,14 @@ static int intel_crt_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
-				 const struct drm_display_mode *mode,
-				 struct drm_display_mode *adjusted_mode)
+static bool intel_crt_compute_config(struct intel_encoder *encoder,
+				     struct intel_crtc_config *pipe_config)
 {
+	struct drm_device *dev = encoder->base.dev;
+
+	if (HAS_PCH_SPLIT(dev))
+		pipe_config->has_pch_encoder = true;
+
 	return true;
 }
 
@@ -683,7 +687,6 @@ static void intel_crt_reset(struct drm_connector *connector)
  */
 
 static const struct drm_encoder_helper_funcs crt_encoder_funcs = {
-	.mode_fixup = intel_crt_mode_fixup,
 	.mode_set = intel_crt_mode_set,
 };
 
@@ -774,6 +777,7 @@ void intel_crt_init(struct drm_device *dev)
 	else
 		crt->adpa_reg = ADPA;
 
+	crt->base.compute_config = intel_crt_compute_config;
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
 	if (I915_HAS_HOTPLUG(dev))

drivers/gpu/drm/i915/intel_ddi.c

@@ -1476,19 +1476,17 @@ static void intel_ddi_destroy(struct drm_encoder *encoder)
 	intel_dp_encoder_destroy(encoder);
 }
 
-static bool intel_ddi_mode_fixup(struct drm_encoder *encoder,
-				 const struct drm_display_mode *mode,
-				 struct drm_display_mode *adjusted_mode)
+static bool intel_ddi_compute_config(struct intel_encoder *encoder,
+				     struct intel_crtc_config *pipe_config)
 {
-	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
-	int type = intel_encoder->type;
+	int type = encoder->type;
 
-	WARN(type == INTEL_OUTPUT_UNKNOWN, "mode_fixup() on unknown output!\n");
+	WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n");
 
 	if (type == INTEL_OUTPUT_HDMI)
-		return intel_hdmi_mode_fixup(encoder, mode, adjusted_mode);
+		return intel_hdmi_compute_config(encoder, pipe_config);
 	else
-		return intel_dp_mode_fixup(encoder, mode, adjusted_mode);
+		return intel_dp_compute_config(encoder, pipe_config);
 }
 
 static const struct drm_encoder_funcs intel_ddi_funcs = {
@@ -1496,7 +1494,6 @@ static const struct drm_encoder_funcs intel_ddi_funcs = {
 };
 
 static const struct drm_encoder_helper_funcs intel_ddi_helper_funcs = {
-	.mode_fixup = intel_ddi_mode_fixup,
 	.mode_set = intel_ddi_mode_set,
 };
 
@@ -1536,6 +1533,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
 			 DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(encoder, &intel_ddi_helper_funcs);
 
+	intel_encoder->compute_config = intel_ddi_compute_config;
 	intel_encoder->enable = intel_enable_ddi;
 	intel_encoder->pre_enable = intel_ddi_pre_enable;
 	intel_encoder->disable = intel_disable_ddi;

drivers/gpu/drm/i915/intel_display.c

@@ -2977,27 +2977,6 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
 	mutex_unlock(&dev->struct_mutex);
 }
 
-static bool ironlake_crtc_driving_pch(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct intel_encoder *intel_encoder;
-
-	/*
-	 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
-	 * must be driven by its own crtc; no sharing is possible.
-	 */
-	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
-		switch (intel_encoder->type) {
-		case INTEL_OUTPUT_EDP:
-			if (!intel_encoder_is_pch_edp(&intel_encoder->base))
-				return false;
-			continue;
-		}
-	}
-
-	return true;
-}
-
 static bool haswell_crtc_driving_pch(struct drm_crtc *crtc)
 {
 	return intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG);
@@ -3338,7 +3317,6 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	u32 temp;
-	bool is_pch_port;
 
 	WARN_ON(!crtc->enabled);
 
@@ -3354,9 +3332,8 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 			I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
 	}
 
-	is_pch_port = ironlake_crtc_driving_pch(crtc);
 
-	if (is_pch_port) {
+	if (intel_crtc->config.has_pch_encoder) {
 		/* Note: FDI PLL enabling _must_ be done before we enable the
 		 * cpu pipes, hence this is separate from all the other fdi/pch
 		 * enabling. */
@@ -3393,10 +3370,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	 */
 	intel_crtc_load_lut(crtc);
 
-	intel_enable_pipe(dev_priv, pipe, is_pch_port);
+	intel_enable_pipe(dev_priv, pipe,
+			  intel_crtc->config.has_pch_encoder);
 	intel_enable_plane(dev_priv, plane, pipe);
 
-	if (is_pch_port)
+	if (intel_crtc->config.has_pch_encoder)
 		ironlake_pch_enable(crtc);
 
 	mutex_lock(&dev->struct_mutex);
@@ -3430,7 +3408,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
-	bool is_pch_port;
 
 	WARN_ON(!crtc->enabled);
 
@@ -3440,9 +3417,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	intel_crtc->active = true;
 	intel_update_watermarks(dev);
 
-	is_pch_port = haswell_crtc_driving_pch(crtc);
-
-	if (is_pch_port)
+	if (intel_crtc->config.has_pch_encoder)
 		dev_priv->display.fdi_link_train(crtc);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
@@ -3473,10 +3448,11 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	intel_ddi_set_pipe_settings(crtc);
 	intel_ddi_enable_transcoder_func(crtc);
 
-	intel_enable_pipe(dev_priv, pipe, is_pch_port);
+	intel_enable_pipe(dev_priv, pipe,
+			  intel_crtc->config.has_pch_encoder);
 	intel_enable_plane(dev_priv, plane, pipe);
 
-	if (is_pch_port)
+	if (intel_crtc->config.has_pch_encoder)
 		lpt_pch_enable(crtc);
 
 	mutex_lock(&dev->struct_mutex);

drivers/gpu/drm/i915/intel_dp.c

@@ -689,12 +689,13 @@ intel_dp_i2c_init(struct intel_dp *intel_dp,
 }
 
 bool
-intel_dp_mode_fixup(struct drm_encoder *encoder,
-		    const struct drm_display_mode *mode,
-		    struct drm_display_mode *adjusted_mode)
+intel_dp_compute_config(struct intel_encoder *encoder,
+			struct intel_crtc_config *pipe_config)
 {
-	struct drm_device *dev = encoder->dev;
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+	struct drm_display_mode *mode = &pipe_config->requested_mode;
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
 	int lane_count, clock;
 	int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
@@ -702,6 +703,9 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,
 	int bpp, mode_rate;
 	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
 
+	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && !is_cpu_edp(intel_dp))
+		pipe_config->has_pch_encoder = true;
+
 	if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
 		intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
 				       adjusted_mode);
@@ -2527,7 +2531,6 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder)
 }
 
 static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
-	.mode_fixup = intel_dp_mode_fixup,
 	.mode_set = intel_dp_mode_set,
 };
 
@@ -2947,6 +2950,7 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 			 DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(&intel_encoder->base, &intel_dp_helper_funcs);
 
+	intel_encoder->compute_config = intel_dp_compute_config;
 	intel_encoder->enable = intel_enable_dp;
 	intel_encoder->pre_enable = intel_pre_enable_dp;
 	intel_encoder->disable = intel_disable_dp;

drivers/gpu/drm/i915/intel_drv.h

@@ -190,6 +190,9 @@ struct intel_crtc_config {
 	 * changes the crtc timings in the mode to prevent the crtc fixup from
 	 * overwriting them.  Currently only lvds needs that. */
 	bool timings_set;
+	/* Whether to set up the PCH/FDI. Note that we never allow sharing
+	 * between pch encoders and cpu encoders. */
+	bool has_pch_encoder;
 	/* Used by SDVO (and if we ever fix it, HDMI). */
 	unsigned pixel_multiplier;
 };
@@ -449,9 +452,8 @@ extern void intel_hdmi_init(struct drm_device *dev,
 extern void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 				      struct intel_connector *intel_connector);
 extern struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder);
-extern bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
-				  const struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode);
+extern bool intel_hdmi_compute_config(struct intel_encoder *encoder,
+				      struct intel_crtc_config *pipe_config);
 extern void intel_dip_infoframe_csum(struct dip_infoframe *avi_if);
 extern bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg,
 			    bool is_sdvob);
@@ -475,9 +477,8 @@ extern void intel_dp_complete_link_train(struct intel_dp *intel_dp);
 extern void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
 extern void intel_dp_encoder_destroy(struct drm_encoder *encoder);
 extern void intel_dp_check_link_status(struct intel_dp *intel_dp);
-extern bool intel_dp_mode_fixup(struct drm_encoder *encoder,
-				const struct drm_display_mode *mode,
-				struct drm_display_mode *adjusted_mode);
+extern bool intel_dp_compute_config(struct intel_encoder *encoder,
+				    struct intel_crtc_config *pipe_config);
 extern bool intel_dpd_is_edp(struct drm_device *dev);
 extern void ironlake_edp_backlight_on(struct intel_dp *intel_dp);
 extern void ironlake_edp_backlight_off(struct intel_dp *intel_dp);

drivers/gpu/drm/i915/intel_hdmi.c

@@ -768,11 +768,12 @@ static int intel_hdmi_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
-			   const struct drm_display_mode *mode,
-			   struct drm_display_mode *adjusted_mode)
+bool intel_hdmi_compute_config(struct intel_encoder *encoder,
+			       struct intel_crtc_config *pipe_config)
 {
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
 
 	if (intel_hdmi->color_range_auto) {
 		/* See CEA-861-E - 5.1 Default Encoding Parameters */
@@ -786,6 +787,9 @@ bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
 	if (intel_hdmi->color_range)
 		adjusted_mode->private_flags |= INTEL_MODE_LIMITED_COLOR_RANGE;
 
+	if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev))
+		pipe_config->has_pch_encoder = true;
+
 	return true;
 }
 
@@ -937,7 +941,6 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
 }
 
 static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = {
-	.mode_fixup = intel_hdmi_mode_fixup,
 	.mode_set = intel_hdmi_mode_set,
 };
 
@@ -1066,6 +1069,7 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
 			 DRM_MODE_ENCODER_TMDS);
 	drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs);
 
+	intel_encoder->compute_config = intel_hdmi_compute_config;
 	intel_encoder->enable = intel_enable_hdmi;
 	intel_encoder->disable = intel_disable_hdmi;
 	intel_encoder->get_hw_state = intel_hdmi_get_hw_state;

drivers/gpu/drm/i915/intel_lvds.c

@@ -331,6 +331,8 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 			       adjusted_mode);
 
 	if (HAS_PCH_SPLIT(dev)) {
+		pipe_config->has_pch_encoder = true;
+
 		intel_pch_panel_fitting(dev,
 					intel_connector->panel.fitting_mode,
 					mode, adjusted_mode);

drivers/gpu/drm/i915/intel_sdvo.c

@@ -1047,6 +1047,9 @@ static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
 	struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
 	struct drm_display_mode *mode = &pipe_config->requested_mode;
 
+	if (HAS_PCH_SPLIT(encoder->base.dev))
+		pipe_config->has_pch_encoder = true;
+
 	/* We need to construct preferred input timings based on our
 	 * output timings.  To do that, we have to set the output
 	 * timings, even though this isn't really the right place in