[ARM] pxa: separate definitions from pxa-regs.h and remove it finally

The remaining registers are separated into:

   - <mach/regs-ost.h>
   - <mach/regs-rtc.h>
   - <mach/regs-intc.h>

and then we can remove pxa-regs.h completely. Instead of #include this
file, let's:

1. include the specific <mach/regs-*.h> with care (if that's absolutely
   necessary)

2. define the registers in the driver, make cleanly defined API to expose
   the register access to external with sufficient reason

Signed-off-by: Eric Miao <eric.miao@marvell.com>

arch/arm/common/sharpsl_pm.c

@@ -29,8 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/pm.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 

arch/arm/mach-pxa/corgi_lcd.c

@@ -22,7 +22,6 @@
 #include <linux/string.h>
 #include <mach/corgi.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
 #include <asm/hardware/scoop.h>

arch/arm/mach-pxa/corgi_ssp.c

@@ -20,7 +20,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/ssp.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/regs-ssp.h>
 #include "sharpsl.h"

arch/arm/mach-pxa/include/mach/mtd-xip.h

@@ -15,8 +15,8 @@
 #ifndef __ARCH_PXA_MTD_XIP_H__
 #define __ARCH_PXA_MTD_XIP_H__
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
+#include <mach/regs-intc.h>
 
 #define xip_irqpending()	(ICIP & ICMR)
 

arch/arm/mach-pxa/include/mach/pxa-regs.h

@@ -1,82 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/pxa-regs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA_REGS_H
-#define __PXA_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		__REG(0x40900000)  /* RTC Count Register */
-#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
-#define RTSR		__REG(0x40900008)  /* RTC Status Register */
-#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
-#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
-#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0		__REG(0x40A00000)  /* */
-#define OSMR1		__REG(0x40A00004)  /* */
-#define OSMR2		__REG(0x40A00008)  /* */
-#define OSMR3		__REG(0x40A0000C)  /* */
-#define OSMR4		__REG(0x40A00080)  /* */
-#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
-#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
-#define OMCR4		__REG(0x40A000C0)  /* */
-#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
-#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
-#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
-#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
-#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
-#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
-
-#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
-
-#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
-#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
-#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
-#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
-
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
-#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
-#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
-#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
-#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
-#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
-
-#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
-#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
-#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
-
-#endif

arch/arm/mach-pxa/include/mach/pxa2xx-regs.h

@@ -14,7 +14,7 @@
 #ifndef __PXA2XX_REGS_H
 #define __PXA2XX_REGS_H
 
-#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
 
 /*
  * PXA Chip selects

arch/arm/mach-pxa/include/mach/regs-intc.h

@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_INTC_H
+#define __ASM_MACH_REGS_INTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+
+#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+
+#endif /* __ASM_MACH_REGS_INTC_H */

arch/arm/mach-pxa/include/mach/regs-ost.h

@@ -0,0 +1,34 @@
+#ifndef __ASM_MACH_REGS_OST_H
+#define __ASM_MACH_REGS_OST_H
+
+#include <mach/hardware.h>
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0		__REG(0x40A00000)  /* */
+#define OSMR1		__REG(0x40A00004)  /* */
+#define OSMR2		__REG(0x40A00008)  /* */
+#define OSMR3		__REG(0x40A0000C)  /* */
+#define OSMR4		__REG(0x40A00080)  /* */
+#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
+#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4		__REG(0x40A000C0)  /* */
+#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
+#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
+
+#endif /* __ASM_MACH_REGS_OST_H */

arch/arm/mach-pxa/include/mach/regs-rtc.h

@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		__REG(0x40900000)  /* RTC Count Register */
+#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
+#define RTSR		__REG(0x40900008)  /* RTC Status Register */
+#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
+#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */

arch/arm/mach-pxa/include/mach/system.h

@@ -13,7 +13,6 @@
 #include <asm/proc-fns.h>
 #include "hardware.h"
 #include "pxa2xx-regs.h"
-#include "pxa-regs.h"
 
 static inline void arch_idle(void)
 {

arch/arm/mach-pxa/irq.c

@@ -20,8 +20,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
 #include <mach/gpio.h>
+#include <mach/regs-intc.h>
 
 #include "generic.h"
 

arch/arm/mach-pxa/mioa701.c

@@ -41,6 +41,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/pxa27x.h>
+#include <mach/regs-rtc.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>

arch/arm/mach-pxa/reset.c

@@ -10,7 +10,7 @@
 #include <linux/io.h>
 #include <asm/proc-fns.h>
 
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
 #include <mach/reset.h>
 
 unsigned int reset_status;

arch/arm/mach-pxa/sharpsl_pm.c

@@ -25,7 +25,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/pm.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/sharpsl.h>
 #include "sharpsl.h"

arch/arm/mach-pxa/sleep.S

@@ -15,7 +15,6 @@
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks

arch/arm/mach-pxa/spitz_pm.c

@@ -24,7 +24,6 @@
 
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"

arch/arm/mach-pxa/standby.S

@@ -13,7 +13,6 @@
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 
 		.text

arch/arm/mach-pxa/time.c

@@ -22,8 +22,7 @@
 #include <asm/div64.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
 
 /*
  * This is PXA's sched_clock implementation. This has a resolution

drivers/input/touchscreen/corgi_ts.c

@@ -21,7 +21,6 @@
 
 #include <mach/sharpsl.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 
 

drivers/net/irda/pxaficp_ir.c

@@ -24,9 +24,8 @@
 
 #include <mach/dma.h>
 #include <mach/irda.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-uart.h>
+#include <mach/regs-ost.h>
 
 #define FICP		__REG(0x40800000)  /* Start of FICP area */
 #define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */

drivers/rtc/rtc-sa1100.c

@@ -35,7 +35,8 @@
 #include <asm/irq.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-rtc.h>
+#include <mach/regs-ost.h>
 #endif
 
 #define RTC_DEF_DIVIDER		32768 - 1

drivers/watchdog/sa1100_wdt.c

@@ -30,7 +30,7 @@
 #include <linux/timex.h>
 
 #ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
 #endif
 
 #include <mach/reset.h>