Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	net/sched/sch_hfsc.c
	net/sched/sch_htb.c
	net/sched/sch_tbf.c

Documentation/DocBook/device-drivers.tmpl

@@ -217,8 +217,8 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Iinclude/linux/serial_core.h
-!Edrivers/serial/serial_core.c
-!Edrivers/serial/8250.c
+!Edrivers/tty/serial/serial_core.c
+!Edrivers/tty/serial/8250.c
   </chapter>
 
   <chapter id="fbdev">

Documentation/DocBook/dvb/dvbapi.xml

@@ -28,7 +28,7 @@
 	<holder>Convergence GmbH</holder>
 </copyright>
 <copyright>
-	<year>2009-2010</year>
+	<year>2009-2011</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 

Documentation/DocBook/media.tmpl

@@ -28,7 +28,7 @@
 <title>LINUX MEDIA INFRASTRUCTURE API</title>
 
 <copyright>
-	<year>2009-2010</year>
+	<year>2009-2011</year>
 	<holder>LinuxTV Developers</holder>
 </copyright>
 
@@ -86,7 +86,7 @@ Foundation. A copy of the license is included in the chapter entitled
 </author>
 </authorgroup>
 <copyright>
-	<year>2009-2010</year>
+	<year>2009-2011</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 

Documentation/DocBook/v4l/dev-rds.xml

@@ -75,6 +75,7 @@ as follows:</para>
   </section>
 
   <section>
+    <title>RDS datastructures</title>
     <table frame="none" pgwide="1" id="v4l2-rds-data">
       <title>struct
 <structname>v4l2_rds_data</structname></title>
@@ -129,10 +130,11 @@ as follows:</para>
 
     <table frame="none" pgwide="1" id="v4l2-rds-block-codes">
       <title>Block defines</title>
-      <tgroup cols="3">
+      <tgroup cols="4">
 	<colspec colname="c1" colwidth="1*" />
 	<colspec colname="c2" colwidth="1*" />
-	<colspec colname="c3" colwidth="5*" />
+	<colspec colname="c3" colwidth="1*" />
+	<colspec colname="c4" colwidth="5*" />
 	<tbody valign="top">
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_MSK</entry>

Documentation/DocBook/v4l/v4l2.xml

@@ -100,6 +100,7 @@ Remote Controller chapter.</contrib>
       <year>2008</year>
       <year>2009</year>
       <year>2010</year>
+      <year>2011</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
 Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
     </copyright>
@@ -381,7 +382,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 2.6.33</subtitle>
+ <subtitle>Revision 2.6.38</subtitle>
 
   <chapter id="common">
     &sub-common;

Documentation/feature-removal-schedule.txt

@@ -357,14 +357,6 @@ Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
 
 -----------------------------
 
-What:	__do_IRQ all in one fits nothing interrupt handler
-When:	2.6.32
-Why:	__do_IRQ was kept for easy migration to the type flow handlers.
-	More than two years of migration time is enough.
-Who:	Thomas Gleixner <tglx@linutronix.de>
-
------------------------------
-
 What:	fakephp and associated sysfs files in /sys/bus/pci/slots/
 When:	2011
 Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to

Documentation/lguest/lguest.c

@@ -39,6 +39,9 @@
 #include <limits.h>
 #include <stddef.h>
 #include <signal.h>
+#include <pwd.h>
+#include <grp.h>
+
 #include <linux/virtio_config.h>
 #include <linux/virtio_net.h>
 #include <linux/virtio_blk.h>
@@ -298,20 +301,27 @@ static void *map_zeroed_pages(unsigned int num)
 
 	/*
 	 * We use a private mapping (ie. if we write to the page, it will be
-	 * copied).
+	 * copied). We allocate an extra two pages PROT_NONE to act as guard
+	 * pages against read/write attempts that exceed allocated space.
 	 */
-	addr = mmap(NULL, getpagesize() * num,
-		    PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
+	addr = mmap(NULL, getpagesize() * (num+2),
+		    PROT_NONE, MAP_PRIVATE, fd, 0);
+
 	if (addr == MAP_FAILED)
 		err(1, "Mmapping %u pages of /dev/zero", num);
 
+	if (mprotect(addr + getpagesize(), getpagesize() * num,
+		     PROT_READ|PROT_WRITE) == -1)
+		err(1, "mprotect rw %u pages failed", num);
+
 	/*
 	 * One neat mmap feature is that you can close the fd, and it
 	 * stays mapped.
 	 */
 	close(fd);
 
-	return addr;
+	/* Return address after PROT_NONE page */
+	return addr + getpagesize();
 }
 
 /* Get some more pages for a device. */
@@ -343,7 +353,7 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 	 * done to it.  This allows us to share untouched memory between
 	 * Guests.
 	 */
-	if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
+	if (mmap(addr, len, PROT_READ|PROT_WRITE,
 		 MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
 		return;
 
@@ -573,10 +583,10 @@ static void *_check_pointer(unsigned long addr, unsigned int size,
 			    unsigned int line)
 {
 	/*
-	 * We have to separately check addr and addr+size, because size could
-	 * be huge and addr + size might wrap around.
+	 * Check if the requested address and size exceeds the allocated memory,
+	 * or addr + size wraps around.
 	 */
-	if (addr >= guest_limit || addr + size >= guest_limit)
+	if ((addr + size) > guest_limit || (addr + size) < addr)
 		errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
 	/*
 	 * We return a pointer for the caller's convenience, now we know it's
@@ -1872,6 +1882,8 @@ static struct option opts[] = {
 	{ "block", 1, NULL, 'b' },
 	{ "rng", 0, NULL, 'r' },
 	{ "initrd", 1, NULL, 'i' },
+	{ "username", 1, NULL, 'u' },
+	{ "chroot", 1, NULL, 'c' },
 	{ NULL },
 };
 static void usage(void)
@@ -1894,6 +1906,12 @@ int main(int argc, char *argv[])
 	/* If they specify an initrd file to load. */
 	const char *initrd_name = NULL;
 
+	/* Password structure for initgroups/setres[gu]id */
+	struct passwd *user_details = NULL;
+
+	/* Directory to chroot to */
+	char *chroot_path = NULL;
+
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
 
@@ -1950,6 +1968,14 @@ int main(int argc, char *argv[])
 		case 'i':
 			initrd_name = optarg;
 			break;
+		case 'u':
+			user_details = getpwnam(optarg);
+			if (!user_details)
+				err(1, "getpwnam failed, incorrect username?");
+			break;
+		case 'c':
+			chroot_path = optarg;
+			break;
 		default:
 			warnx("Unknown argument %s", argv[optind]);
 			usage();
@@ -2021,6 +2047,37 @@ int main(int argc, char *argv[])
 	/* If we exit via err(), this kills all the threads, restores tty. */
 	atexit(cleanup_devices);
 
+	/* If requested, chroot to a directory */
+	if (chroot_path) {
+		if (chroot(chroot_path) != 0)
+			err(1, "chroot(\"%s\") failed", chroot_path);
+
+		if (chdir("/") != 0)
+			err(1, "chdir(\"/\") failed");
+
+		verbose("chroot done\n");
+	}
+
+	/* If requested, drop privileges */
+	if (user_details) {
+		uid_t u;
+		gid_t g;
+
+		u = user_details->pw_uid;
+		g = user_details->pw_gid;
+
+		if (initgroups(user_details->pw_name, g) != 0)
+			err(1, "initgroups failed");
+
+		if (setresgid(g, g, g) != 0)
+			err(1, "setresgid failed");
+
+		if (setresuid(u, u, u) != 0)
+			err(1, "setresuid failed");
+
+		verbose("Dropping privileges completed\n");
+	}
+
 	/* Finally, run the Guest.  This doesn't return. */
 	run_guest();
 }

Documentation/lguest/lguest.txt

@@ -117,6 +117,11 @@ Running Lguest:
     
   for general information on how to get bridging to work.
 
+- Random number generation. Using the --rng option will provide a
+  /dev/hwrng in the guest that will read from the host's /dev/random.
+  Use this option in conjunction with rng-tools (see ../hw_random.txt)
+  to provide entropy to the guest kernel's /dev/random.
+
 There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
 
 Good luck!

Documentation/sound/alsa/soc/codec.txt

@@ -27,42 +27,38 @@ ASoC Codec driver breakdown
 
 1 - Codec DAI and PCM configuration
 -----------------------------------
-Each codec driver must have a struct snd_soc_codec_dai to define its DAI and
+Each codec driver must have a struct snd_soc_dai_driver to define its DAI and
 PCM capabilities and operations. This struct is exported so that it can be
 registered with the core by your machine driver.
 
 e.g.
 
-struct snd_soc_codec_dai wm8731_dai = {
-	.name = "WM8731",
-	/* playback capabilities */
+static struct snd_soc_dai_ops wm8731_dai_ops = {
+	.prepare	= wm8731_pcm_prepare,
+	.hw_params	= wm8731_hw_params,
+	.shutdown	= wm8731_shutdown,
+	.digital_mute	= wm8731_mute,
+	.set_sysclk	= wm8731_set_dai_sysclk,
+	.set_fmt	= wm8731_set_dai_fmt,
+};
+
+struct snd_soc_dai_driver wm8731_dai = {
+	.name = "wm8731-hifi",
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* capture capabilities */
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* pcm operations - see section 4 below */
-	.ops = {
-		.prepare = wm8731_pcm_prepare,
-		.hw_params = wm8731_hw_params,
-		.shutdown = wm8731_shutdown,
-	},
-	/* DAI operations - see DAI.txt */
-	.dai_ops = {
-		.digital_mute = wm8731_mute,
-		.set_sysclk = wm8731_set_dai_sysclk,
-		.set_fmt = wm8731_set_dai_fmt,
-	}
+	.ops = &wm8731_dai_ops,
+	.symmetric_rates = 1,
 };
-EXPORT_SYMBOL_GPL(wm8731_dai);
 
 
 2 - Codec control IO
@@ -186,13 +182,14 @@ when the mute is applied or freed.
 
 i.e.
 
-static int wm8974_mute(struct snd_soc_codec *codec,
-	struct snd_soc_codec_dai *dai, int mute)
+static int wm8974_mute(struct snd_soc_dai *dai, int mute)
 {
-	u16 mute_reg = wm8974_read_reg_cache(codec, WM8974_DAC) & 0xffbf;
-	if(mute)
-		wm8974_write(codec, WM8974_DAC, mute_reg | 0x40);
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = snd_soc_read(codec, WM8974_DAC) & 0xffbf;
+
+	if (mute)
+		snd_soc_write(codec, WM8974_DAC, mute_reg | 0x40);
 	else
-		wm8974_write(codec, WM8974_DAC, mute_reg);
+		snd_soc_write(codec, WM8974_DAC, mute_reg);
 	return 0;
 }

Documentation/sound/alsa/soc/machine.txt

@@ -12,6 +12,8 @@ the following struct:-
 struct snd_soc_card {
 	char *name;
 
+	...
+
 	int (*probe)(struct platform_device *pdev);
 	int (*remove)(struct platform_device *pdev);
 
@@ -22,12 +24,13 @@ struct snd_soc_card {
 	int (*resume_pre)(struct platform_device *pdev);
 	int (*resume_post)(struct platform_device *pdev);
 
-	/* machine stream operations */
-	struct snd_soc_ops *ops;
+	...
 
 	/* CPU <--> Codec DAI links  */
 	struct snd_soc_dai_link *dai_link;
 	int num_links;
+
+	...
 };
 
 probe()/remove()
@@ -42,11 +45,6 @@ of any machine audio tasks that have to be done before or after the codec, DAIs
 and DMA is suspended and resumed. Optional.
 
 
-Machine operations
-------------------
-The machine specific audio operations can be set here. Again this is optional.
-
-
 Machine DAI Configuration
 -------------------------
 The machine DAI configuration glues all the codec and CPU DAIs together. It can
@@ -61,8 +59,10 @@ struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
 static struct snd_soc_dai_link corgi_dai = {
 	.name = "WM8731",
 	.stream_name = "WM8731",
-	.cpu_dai = &pxa_i2s_dai,
-	.codec_dai = &wm8731_dai,
+	.cpu_dai_name = "pxa-is2-dai",
+	.codec_dai_name = "wm8731-hifi",
+	.platform_name = "pxa-pcm-audio",
+	.codec_name = "wm8713-codec.0-001a",
 	.init = corgi_wm8731_init,
 	.ops = &corgi_ops,
 };
@@ -77,26 +77,6 @@ static struct snd_soc_card snd_soc_corgi = {
 };
 
 
-Machine Audio Subsystem
------------------------
-
-The machine soc device glues the platform, machine and codec driver together.
-Private data can also be set here. e.g.
-
-/* corgi audio private data */
-static struct wm8731_setup_data corgi_wm8731_setup = {
-	.i2c_address = 0x1b,
-};
-
-/* corgi audio subsystem */
-static struct snd_soc_device corgi_snd_devdata = {
-	.machine = &snd_soc_corgi,
-	.platform = &pxa2xx_soc_platform,
-	.codec_dev = &soc_codec_dev_wm8731,
-	.codec_data = &corgi_wm8731_setup,
-};
-
-
 Machine Power Map
 -----------------
 

Documentation/sound/alsa/soc/platform.txt

@@ -20,9 +20,10 @@ struct snd_soc_ops {
 	int (*trigger)(struct snd_pcm_substream *, int);
 };
 
-The platform driver exports its DMA functionality via struct snd_soc_platform:-
+The platform driver exports its DMA functionality via struct
+snd_soc_platform_driver:-
 
-struct snd_soc_platform {
+struct snd_soc_platform_driver {
 	char *name;
 
 	int (*probe)(struct platform_device *pdev);
@@ -34,6 +35,13 @@ struct snd_soc_platform {
 	int (*pcm_new)(struct snd_card *, struct snd_soc_codec_dai *, struct snd_pcm *);
 	void (*pcm_free)(struct snd_pcm *);
 
+	/*
+	 * For platform caused delay reporting.
+	 * Optional.
+	 */
+	snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+
 	/* platform stream ops */
 	struct snd_pcm_ops *pcm_ops;
 };

Documentation/video4linux/v4l2-controls.txt

@@ -285,6 +285,9 @@ implement g_volatile_ctrl like this:
 The 'new value' union is not used in g_volatile_ctrl. In general controls
 that need to implement g_volatile_ctrl are read-only controls.
 
+Note that if one or more controls in a control cluster are marked as volatile,
+then all the controls in the cluster are seen as volatile.
+
 To mark a control as volatile you have to set the is_volatile flag:
 
 	ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
@@ -462,6 +465,15 @@ pointer to the v4l2_ctrl_ops struct that is used for that cluster.
 Obviously, all controls in the cluster array must be initialized to either
 a valid control or to NULL.
 
+In rare cases you might want to know which controls of a cluster actually
+were set explicitly by the user. For this you can check the 'is_new' flag of
+each control. For example, in the case of a volume/mute cluster the 'is_new'
+flag of the mute control would be set if the user called VIDIOC_S_CTRL for
+mute only. If the user would call VIDIOC_S_EXT_CTRLS for both mute and volume
+controls, then the 'is_new' flag would be 1 for both controls.
+
+The 'is_new' flag is always 1 when called from v4l2_ctrl_handler_setup().
+
 
 VIDIOC_LOG_STATUS Support
 =========================

MAINTAINERS

@@ -162,7 +162,7 @@ L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
-F:	drivers/serial/8250*
+F:	drivers/tty/serial/8250*
 F:	include/linux/serial_8250.h
 
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
@@ -624,11 +624,15 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
-ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
+ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
 M:	Andrew Victor <linux@maxim.org.za>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://maxim.org.za/at91_26.html
-S:	Maintained
+W:	http://www.linux4sam.org
+S:	Supported
+F:	arch/arm/mach-at91/
 
 ARM/BCMRING ARM ARCHITECTURE
 M:	Jiandong Zheng <jdzheng@broadcom.com>
@@ -888,8 +892,8 @@ F:	arch/arm/mach-msm/
 F:	drivers/video/msm/
 F:	drivers/mmc/host/msm_sdcc.c
 F:	drivers/mmc/host/msm_sdcc.h
-F:	drivers/serial/msm_serial.h
-F:	drivers/serial/msm_serial.c
+F:	drivers/tty/serial/msm_serial.h
+F:	drivers/tty/serial/msm_serial.c
 T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
 S:	Maintained
 
@@ -1256,7 +1260,7 @@ F:	drivers/mmc/host/atmel-mci-regs.h
 ATMEL AT91 / AT32 SERIAL DRIVER
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
-F:	drivers/serial/atmel_serial.c
+F:	drivers/tty/serial/atmel_serial.c
 
 ATMEL LCDFB DRIVER
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
@@ -1412,7 +1416,7 @@ M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
-F:	drivers/serial/bfin_5xx.c
+F:	drivers/tty/serial/bfin_5xx.c
 
 BLACKFIN WATCHDOG DRIVER
 M:	Mike Frysinger <vapier.adi@gmail.com>
@@ -1877,7 +1881,7 @@ L:	linux-cris-kernel@axis.com
 W:	http://developer.axis.com
 S:	Maintained
 F:	arch/cris/
-F:	drivers/serial/crisv10.*
+F:	drivers/tty/serial/crisv10.*
 
 CRYPTO API
 M:	Herbert Xu <herbert@gondor.apana.org.au>
@@ -2216,7 +2220,7 @@ F:	drivers/net/wan/dscc4.c
 DZ DECSTATION DZ11 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
-F:	drivers/serial/dz.*
+F:	drivers/tty/serial/dz.*
 
 EATA-DMA SCSI DRIVER
 M:	Michael Neuffer <mike@i-Connect.Net>
@@ -2643,7 +2647,7 @@ FREESCALE QUICC ENGINE UCC UART DRIVER
 M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
-F:	drivers/serial/ucc_uart.c
+F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
 M:	Timur Tabi <timur@freescale.com>
@@ -3146,7 +3150,7 @@ S:	Orphan
 F:	drivers/video/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-M:	Roland Dreier <rolandd@cisco.com>
+M:	Roland Dreier <roland@kernel.org>
 M:	Sean Hefty <sean.hefty@intel.com>
 M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	linux-rdma@vger.kernel.org
@@ -3350,7 +3354,7 @@ IOC3 SERIAL DRIVER
 M:	Pat Gefre <pfg@sgi.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
-F:	drivers/serial/ioc3_serial.c
+F:	drivers/tty/serial/ioc3_serial.c
 
 IP MASQUERADING
 M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
@@ -3527,7 +3531,7 @@ JSM Neo PCI based serial card
 M:	Breno Leitao <leitao@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
-F:	drivers/serial/jsm/
+F:	drivers/tty/serial/jsm/
 
 K10TEMP HARDWARE MONITORING DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
@@ -3670,6 +3674,28 @@ F:	include/linux/key-type.h
 F:	include/keys/
 F:	security/keys/
 
+KEYS-TRUSTED
+M:	David Safford <safford@watson.ibm.com>
+M:	Mimi Zohar <zohar@us.ibm.com>
+L:	linux-security-module@vger.kernel.org
+L:	keyrings@linux-nfs.org
+S:	Supported
+F:	Documentation/keys-trusted-encrypted.txt
+F:	include/keys/trusted-type.h
+F:	security/keys/trusted.c
+F:	security/keys/trusted.h
+
+KEYS-ENCRYPTED
+M:	Mimi Zohar <zohar@us.ibm.com>
+M:	David Safford <safford@watson.ibm.com>
+L:	linux-security-module@vger.kernel.org
+L:	keyrings@linux-nfs.org
+S:	Supported
+F:	Documentation/keys-trusted-encrypted.txt
+F:	include/keys/encrypted-type.h
+F:	security/keys/encrypted.c
+F:	security/keys/encrypted.h
+
 KGDB / KDB /debug_core
 M:	Jason Wessel <jason.wessel@windriver.com>
 W:	http://kgdb.wiki.kernel.org/
@@ -3677,7 +3703,7 @@ L:	kgdb-bugreport@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/DocBook/kgdb.tmpl
 F:	drivers/misc/kgdbts.c
-F:	drivers/serial/kgdboc.c
+F:	drivers/tty/serial/kgdboc.c
 F:	include/linux/kdb.h
 F:	include/linux/kgdb.h
 F:	kernel/debug/
@@ -5545,7 +5571,7 @@ M:	Pat Gefre <pfg@sgi.com>
 L:	linux-ia64@vger.kernel.org
 S:	Supported
 F:	Documentation/ia64/serial.txt
-F:	drivers/serial/ioc?_serial.c
+F:	drivers/tty/serial/ioc?_serial.c
 F:	include/linux/ioc?.h
 
 SGI VISUAL WORKSTATION 320 AND 540
@@ -5567,7 +5593,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
 F:	arch/arm/mach-lh7a40x/
-F:	drivers/serial/serial_lh7a40x.c
+F:	drivers/tty/serial/serial_lh7a40x.c
 F:	drivers/usb/gadget/lh7a40*
 F:	drivers/usb/host/ohci-lh7a40*
 
@@ -5787,14 +5813,14 @@ L:	sparclinux@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
 S:	Maintained
-F:	drivers/serial/suncore.c
-F:	drivers/serial/suncore.h
-F:	drivers/serial/sunhv.c
-F:	drivers/serial/sunsab.c
-F:	drivers/serial/sunsab.h
-F:	drivers/serial/sunsu.c
-F:	drivers/serial/sunzilog.c
-F:	drivers/serial/sunzilog.h
+F:	drivers/tty/serial/suncore.c
+F:	drivers/tty/serial/suncore.h
+F:	drivers/tty/serial/sunhv.c
+F:	drivers/tty/serial/sunsab.c
+F:	drivers/tty/serial/sunsab.h
+F:	drivers/tty/serial/sunsu.c
+F:	drivers/tty/serial/sunzilog.c
+F:	drivers/tty/serial/sunzilog.h
 
 SPEAR PLATFORM SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
@@ -6124,8 +6150,8 @@ TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
-F:	drivers/char/tty_*
-F:	drivers/serial/serial_core.c
+F:	drivers/tty/*
+F:	drivers/tty/serial/serial_core.c
 F:	include/linux/serial_core.h
 F:	include/linux/serial.h
 F:	include/linux/tty.h
@@ -6870,7 +6896,7 @@ XILINX UARTLITE SERIAL DRIVER
 M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
-F:	drivers/serial/uartlite.c
+F:	drivers/tty/serial/uartlite.c
 
 YAM DRIVER FOR AX.25
 M:	Jean-Paul Roubelat <jpr@f6fbb.org>
@@ -6916,7 +6942,7 @@ F:	drivers/media/video/zoran/
 ZS DECSTATION Z85C30 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
-F:	drivers/serial/zs.*
+F:	drivers/tty/serial/zs.*
 
 GRE DEMULTIPLEXER DRIVER
 M:	Dmitry Kozlov <xeb@mail.ru>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -8,6 +8,9 @@ config ALPHA
 	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_PROBE
+	select AUTO_IRQ_AFFINITY if SMP
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
@@ -68,22 +71,6 @@ config GENERIC_IOMAP
 	bool
 	default n
 
-config GENERIC_HARDIRQS_NO__DO_IRQ
-	def_bool y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config AUTO_IRQ_AFFINITY
-	bool
-	depends on SMP
-	default y
-
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 

arch/arm/configs/ag5evm_defconfig

@@ -10,7 +10,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set

arch/arm/configs/am200epdkit_defconfig

@@ -3,7 +3,7 @@ CONFIG_LOCALVERSION="gum"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SHMEM is not set

arch/arm/configs/at572d940hfek_defconfig

@@ -17,7 +17,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m

arch/arm/configs/badge4_defconfig

@@ -1,6 +1,6 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODVERSIONS=y
 CONFIG_ARCH_SA1100=y

arch/arm/configs/bcmring_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_HOTPLUG is not set
 # CONFIG_ELF_CORE is not set

arch/arm/configs/cm_x2xx_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set

arch/arm/configs/colibri_pxa270_defconfig

@@ -8,7 +8,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/collie_defconfig

@@ -4,7 +4,7 @@ CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_EPOLL is not set
 CONFIG_SLOB=y

arch/arm/configs/corgi_defconfig

@@ -4,7 +4,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_MODULES=y

arch/arm/configs/da8xx_omapl_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y

arch/arm/configs/davinci_all_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y

arch/arm/configs/dove_defconfig

@@ -1,7 +1,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/ebsa110_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_ARCH_EBSA110=y
 CONFIG_PCCARD=m

arch/arm/configs/edb7211_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
 CONFIG_ARCH_EDB7211=y

arch/arm/configs/em_x270_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set

arch/arm/configs/ep93xx_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/eseries_pxa_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y

arch/arm/configs/ezx_defconfig

@@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/footbridge_defconfig

@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
 CONFIG_ARCH_FOOTBRIDGE=y

arch/arm/configs/fortunet_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
 CONFIG_ARCH_FORTUNET=y

arch/arm/configs/h5000_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/imote2_defconfig

@@ -6,7 +6,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/ixp2000_defconfig

@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/ixp23xx_defconfig

@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/ixp4xx_defconfig

@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set

arch/arm/configs/loki_defconfig

@@ -1,7 +1,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/lpd7a400_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 # CONFIG_EPOLL is not set
 # CONFIG_IOSCHED_DEADLINE is not set

arch/arm/configs/lpd7a404_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 # CONFIG_EPOLL is not set
 CONFIG_SLAB=y

arch/arm/configs/magician_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/mv78xx0_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y

arch/arm/configs/mx1_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/mx21_defconfig

@@ -4,7 +4,7 @@ CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/mx27_defconfig

@@ -4,7 +4,7 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y

arch/arm/configs/mx3_defconfig

@@ -4,7 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/mx51_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_RELAY=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y

arch/arm/configs/nhk8815_defconfig

@@ -7,7 +7,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/omap1_defconfig

@@ -6,7 +6,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set

arch/arm/configs/omap2plus_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y

arch/arm/configs/orion5x_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y

arch/arm/configs/pcm027_defconfig

@@ -7,7 +7,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/pcontrol_g20_defconfig

@@ -10,7 +10,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set

arch/arm/configs/pleb_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 # CONFIG_SHMEM is not set
 CONFIG_MODULES=y

arch/arm/configs/pnx4008_defconfig

@@ -5,7 +5,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/simpad_defconfig

@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="oe1"
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y

arch/arm/configs/spitz_defconfig

@@ -4,7 +4,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_MODULES=y

arch/arm/configs/stmp378x_defconfig

@@ -5,7 +5,7 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/stmp37xx_defconfig

@@ -5,7 +5,7 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y

arch/arm/configs/tct_hammer_defconfig

@@ -5,7 +5,7 @@ CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_BUG is not set
 # CONFIG_ELF_CORE is not set

arch/arm/configs/trizeps4_defconfig

@@ -7,7 +7,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/arm/configs/u300_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_MODULES=y

arch/arm/configs/viper_defconfig

@@ -3,7 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=13
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_SHMEM is not set
 CONFIG_SLAB=y

arch/arm/configs/xcep_defconfig

@@ -8,7 +8,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set

arch/arm/mach-msm/board-qsd8x50.c

@@ -43,7 +43,7 @@ static const unsigned        qsd8x50_surf_smc91x_gpio __initdata = 156;
  * at run-time: they vary from board to board, and the true
  * configuration won't be known until boot.
  */
-static struct resource smc91x_resources[] __initdata = {
+static struct resource smc91x_resources[] = {
 	[0] = {
 		.flags = IORESOURCE_MEM,
 	},
@@ -52,7 +52,7 @@ static struct resource smc91x_resources[] __initdata = {
 	},
 };
 
-static struct platform_device smc91x_device __initdata = {
+static struct platform_device smc91x_device = {
 	.name           = "smc91x",
 	.id             = 0,
 	.num_resources  = ARRAY_SIZE(smc91x_resources),

arch/arm/mach-omap1/Kconfig

@@ -9,6 +9,7 @@ config ARCH_OMAP730
 	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
 	select CPU_ARM926T
+	select OMAP_MPU_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP850
@@ -22,6 +23,7 @@ config ARCH_OMAP15XX
 	default y
 	bool "OMAP15xx Based System"
 	select CPU_ARM925T
+	select OMAP_MPU_TIMER
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1

arch/arm/mach-omap1/Makefile

@@ -3,12 +3,11 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o
+obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
-obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management

arch/arm/mach-omap1/time.c

@@ -44,16 +44,21 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
+#include <asm/sched_clock.h>
+
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
 #include <plat/common.h>
 
+#ifdef CONFIG_OMAP_MPU_TIMER
+
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
@@ -67,7 +72,7 @@ typedef struct {
 ((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 				 (n)*OMAP_MPU_TIMER_OFFSET))
 
-static inline unsigned long omap_mpu_timer_read(int nr)
+static inline unsigned long notrace omap_mpu_timer_read(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 	return timer->read_tim;
@@ -212,6 +217,32 @@ static struct clocksource clocksource_mpu = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static DEFINE_CLOCK_DATA(cd);
+
+static inline unsigned long long notrace _omap_mpu_sched_clock(void)
+{
+	u32 cyc = mpu_read(&clocksource_mpu);
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+#ifndef CONFIG_OMAP_32K_TIMER
+unsigned long long notrace sched_clock(void)
+{
+	return _omap_mpu_sched_clock();
+}
+#else
+static unsigned long long notrace omap_mpu_sched_clock(void)
+{
+	return _omap_mpu_sched_clock();
+}
+#endif
+
+static void notrace mpu_update_sched_clock(void)
+{
+	u32 cyc = mpu_read(&clocksource_mpu);
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
 static void __init omap_init_clocksource(unsigned long rate)
 {
 	static char err[] __initdata = KERN_ERR
@@ -219,17 +250,13 @@ static void __init omap_init_clocksource(unsigned long rate)
 
 	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
 	omap_mpu_timer_start(1, ~0, 1);
+	init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
 
 	if (clocksource_register_hz(&clocksource_mpu, rate))
 		printk(err, clocksource_mpu.name);
 }
 
-/*
- * ---------------------------------------------------------------------------
- * Timer initialization
- * ---------------------------------------------------------------------------
- */
-static void __init omap_timer_init(void)
+static void __init omap_mpu_timer_init(void)
 {
 	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
 	unsigned long	rate;
@@ -246,6 +273,66 @@ static void __init omap_timer_init(void)
 	omap_init_clocksource(rate);
 }
 
+#else
+static inline void omap_mpu_timer_init(void)
+{
+	pr_err("Bogus timer, should not happen\n");
+}
+#endif	/* CONFIG_OMAP_MPU_TIMER */
+
+#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER)
+static unsigned long long (*preferred_sched_clock)(void);
+
+unsigned long long notrace sched_clock(void)
+{
+	if (!preferred_sched_clock)
+		return 0;
+
+	return preferred_sched_clock();
+}
+
+static inline void preferred_sched_clock_init(bool use_32k_sched_clock)
+{
+	if (use_32k_sched_clock)
+		preferred_sched_clock = omap_32k_sched_clock;
+	else
+		preferred_sched_clock = omap_mpu_sched_clock;
+}
+#else
+static inline void preferred_sched_clock_init(bool use_32k_sched_clcok)
+{
+}
+#endif
+
+static inline int omap_32k_timer_usable(void)
+{
+	int res = false;
+
+	if (cpu_is_omap730() || cpu_is_omap15xx())
+		return res;
+
+#ifdef CONFIG_OMAP_32K_TIMER
+	res = omap_32k_timer_init();
+#endif
+
+	return res;
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+static void __init omap_timer_init(void)
+{
+	if (omap_32k_timer_usable()) {
+		preferred_sched_clock_init(1);
+	} else {
+		omap_mpu_timer_init();
+		preferred_sched_clock_init(0);
+	}
+}
+
 struct sys_timer omap_timer = {
 	.init		= omap_timer_init,
 };

arch/arm/mach-omap1/timer32k.c

@@ -52,10 +52,9 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <plat/common.h>
 #include <plat/dmtimer.h>
 
-struct sys_timer omap_timer;
-
 /*
  * ---------------------------------------------------------------------------
  * 32KHz OS timer
@@ -181,14 +180,14 @@ static __init void omap_init_32k_timer(void)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init omap_timer_init(void)
+bool __init omap_32k_timer_init(void)
 {
+	omap_init_clocksource_32k();
+
 #ifdef CONFIG_OMAP_DM_TIMER
 	omap_dm_timer_init();
 #endif
 	omap_init_32k_timer();
-}
 
-struct sys_timer omap_timer = {
-	.init		= omap_timer_init,
-};
+	return true;
+}

arch/arm/mach-omap2/board-cm-t3517.c

@@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {}
 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 #define RTC_IO_GPIO		(153)
 #define RTC_WR_GPIO		(154)
-#define RTC_RD_GPIO		(160)
+#define RTC_RD_GPIO		(53)
 #define RTC_CS_GPIO		(163)
+#define RTC_CS_EN_GPIO		(160)
 
 struct v3020_platform_data cm_t3517_v3020_pdata = {
 	.use_gpio	= 1,
@@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = {
 
 static void __init cm_t3517_init_rtc(void)
 {
+	int err;
+
+	err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en");
+	if (err) {
+		pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
+		return;
+	}
+
+	gpio_direction_output(RTC_CS_EN_GPIO, 1);
+
 	platform_device_register(&cm_t3517_rtc_device);
 }
 #else
@@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
 	},
 	{
 		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
 		.size           = 32 * NAND_BLOCK_SIZE,
 	},
 	{
 		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
 		.size           = MTDPART_SIZ_FULL,
 	},
 };
@@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void)
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
 	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* RTC GPIOs: IO, WR#, RD#, CS# */
+
+	/* RTC GPIOs: */
+	/* IO - GPIO153 */
 	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* WR# - GPIO154 */
 	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* RD# - GPIO53 */
+	OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS# - GPIO163 */
 	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS EN - GPIO160 */
+	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
 	/* HSUSB1 RESET */
 	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	/* HSUSB2 RESET */

arch/arm/mach-omap2/board-devkit8000.c

@@ -275,8 +275,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
 	.setup		= devkit8000_twl_gpio_setup,
 };

arch/arm/mach-omap2/clock44xx_data.c

@@ -34,7 +34,6 @@
 #include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
-#include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
 #include "scrm44xx.h"

arch/arm/mach-omap2/clockdomain.c

@@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
 	if (IS_ERR(cd)) {
 		pr_debug("clockdomain: hardware cannot set/clear wake up of "
@@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 	struct clkdm_dep *cd;
 	u32 mask = 0;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s: %s: not yet implemented\n",
+		       clkdm->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm)
 		return -EINVAL;
 
@@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
-			  "support is not yet implemented\n");
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_add_autodeps(clkdm);
@@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
-			  "support is not yet implemented\n");
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_del_autodeps(clkdm);

arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -30,8 +30,6 @@
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
 #include "prcm44xx.h"

arch/arm/mach-omap2/powerdomain2xxx_3xxx.c

@@ -19,7 +19,6 @@
 #include <plat/prcm.h>
 
 #include "powerdomain.h"
-#include "prm-regbits-34xx.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-34xx.h"

arch/arm/mach-omap2/timer-gp.c

@@ -42,6 +42,8 @@
 
 #include "timer-gp.h"
 
+#include <plat/common.h>
+
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
 
@@ -176,10 +178,14 @@ static void __init omap2_gp_clockevent_init(void)
 /* 
  * When 32k-timer is enabled, don't use GPTimer for clocksource
  * instead, just leave default clocksource which uses the 32k
- * sync counter.  See clocksource setup in see plat-omap/common.c. 
+ * sync counter.  See clocksource setup in plat-omap/counter_32k.c
  */
 
-static inline void __init omap2_gp_clocksource_init(void) {}
+static void __init omap2_gp_clocksource_init(void)
+{
+	omap_init_clocksource_32k();
+}
+
 #else
 /*
  * clocksource

arch/arm/plat-omap/Kconfig

@@ -144,12 +144,9 @@ config OMAP_IOMMU_DEBUG
 config OMAP_IOMMU_IVA2
 	bool
 
-choice
-	prompt "System timer"
-	default OMAP_32K_TIMER if !ARCH_OMAP15XX
-
 config OMAP_MPU_TIMER
 	bool "Use mpu timer"
+	depends on ARCH_OMAP1
 	help
 	  Select this option if you want to use the OMAP mpu timer. This
 	  timer provides more intra-tick resolution than the 32KHz timer,
@@ -158,6 +155,7 @@ config OMAP_MPU_TIMER
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
 	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+	default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
@@ -165,8 +163,6 @@ config OMAP_32K_TIMER
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
 	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
 
-endchoice
-
 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
 	depends on ARCH_OMAP3 && PM

arch/arm/plat-omap/counter_32k.c

@@ -36,8 +36,6 @@
 
 #define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
 
-#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
-
 #include <linux/clocksource.h>
 
 /*
@@ -122,12 +120,24 @@ static DEFINE_CLOCK_DATA(cd);
 #define SC_MULT		4000000000u
 #define SC_SHIFT	17
 
-unsigned long long notrace sched_clock(void)
+static inline unsigned long long notrace _omap_32k_sched_clock(void)
 {
 	u32 cyc = clocksource_32k.read(&clocksource_32k);
 	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
 }
 
+#ifndef CONFIG_OMAP_MPU_TIMER
+unsigned long long notrace sched_clock(void)
+{
+	return _omap_32k_sched_clock();
+}
+#else
+unsigned long long notrace omap_32k_sched_clock(void)
+{
+	return _omap_32k_sched_clock();
+}
+#endif
+
 static void notrace omap_update_sched_clock(void)
 {
 	u32 cyc = clocksource_32k.read(&clocksource_32k);
@@ -160,7 +170,7 @@ void read_persistent_clock(struct timespec *ts)
 	*ts = *tsp;
 }
 
-static int __init omap_init_clocksource_32k(void)
+int __init omap_init_clocksource_32k(void)
 {
 	static char err[] __initdata = KERN_ERR
 			"%s: can't register clocksource!\n";
@@ -195,7 +205,3 @@ static int __init omap_init_clocksource_32k(void)
 	}
 	return 0;
 }
-arch_initcall(omap_init_clocksource_32k);
-
-#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
-

arch/arm/plat-omap/dma.c

@@ -53,7 +53,7 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 #endif
 
 #define OMAP_DMA_ACTIVE			0x01
-#define OMAP2_DMA_CSR_CLEAR_MASK	0xffe
+#define OMAP2_DMA_CSR_CLEAR_MASK	0xffffffff
 
 #define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
 
@@ -1873,7 +1873,7 @@ static int omap2_dma_handle_ch(int ch)
 		printk(KERN_INFO "DMA misaligned error with device %d\n",
 		       dma_chan[ch].dev_id);
 
-	p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch);
+	p->dma_write(status, CSR, ch);
 	p->dma_write(1 << ch, IRQSTATUS_L0, ch);
 	/* read back the register to flush the write */
 	p->dma_read(IRQSTATUS_L0, ch);
@@ -1893,10 +1893,9 @@ static int omap2_dma_handle_ch(int ch)
 			OMAP_DMA_CHAIN_INCQHEAD(chain_id);
 
 		status = p->dma_read(CSR, ch);
+		p->dma_write(status, CSR, ch);
 	}
 
-	p->dma_write(status, CSR, ch);
-
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
 

arch/arm/plat-omap/include/plat/common.h

@@ -35,6 +35,9 @@ struct sys_timer;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
+extern bool omap_32k_timer_init(void);
+extern int __init omap_init_clocksource_32k(void);
+extern unsigned long long notrace omap_32k_sched_clock(void);
 
 extern void omap_reserve(void);
 

arch/avr32/Kconfig

@@ -1,8 +1,8 @@
 config AVR32
 	def_bool y
-	# With EMBEDDED=n, we get lots of stuff automatically selected
+	# With EXPERT=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
-	select EMBEDDED
+	select EXPERT
 	select HAVE_CLK
 	select HAVE_OPROFILE
 	select HAVE_KPROBES

arch/blackfin/Kconfig

@@ -30,6 +30,9 @@ config BLACKFIN
 	select HAVE_KERNEL_LZO if RAMKERNEL
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_PROBE
+	select IRQ_PER_CPU if SMP
 
 config GENERIC_CSUM
 	def_bool y
@@ -44,15 +47,6 @@ config ZONE_DMA
 config GENERIC_FIND_NEXT_BIT
 	def_bool y
 
-config GENERIC_HARDIRQS
-	def_bool y
-
-config GENERIC_IRQ_PROBE
-	def_bool y
-
-config GENERIC_HARDIRQS_NO__DO_IRQ
-	def_bool y
-
 config GENERIC_GPIO
 	def_bool y
 
@@ -254,11 +248,6 @@ config HOTPLUG_CPU
 	depends on SMP && HOTPLUG
 	default y
 
-config IRQ_PER_CPU
-	bool
-	depends on SMP
-	default y
-
 config HAVE_LEGACY_PER_CPU_AREA
 	def_bool y
 	depends on SMP

arch/blackfin/configs/BF518F-EZBRD_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF526-EZBRD_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF527-AD7160-EVAL_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_AIO is not set
 CONFIG_SLAB=y

arch/blackfin/configs/BF527-EZKIT-V2_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF527-TLL6527M_defconfig

@@ -6,7 +6,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF561-ACVILON_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF561-EZKIT-SMP_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -5,7 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set

arch/blackfin/configs/BlackStamp_defconfig

@@ -6,7 +6,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_FUTEX is not set