ARM: at91: add at91sam9260 DT support

The at91sam9260 and at91sam9g20 share most of the same IP.
So udpate the node property in the at91sam9g20 only.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/boot/dts/at91sam9260.dtsi

@@ -0,0 +1,238 @@
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9260 family SoC";
+	compatible = "atmel,at91sam9260";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &usart4;
+		serial6 = &usart5;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x04000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <2>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 4>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 4 18 4 19 4>;
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 4 27 4 28 4>;
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 4>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart3: serial@fffd0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd0000 0x200>;
+				interrupts = <23 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart4: serial@fffd4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd4000 0x200>;
+				interrupts = <24 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart5: serial@fffd8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd8000 0x200>;
+				interrupts = <25 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffc4000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xfffc4000 0x100>;
+				interrupts = <21 4>;
+				status = "disabled";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 4>;
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe800 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			gpios = <&pioC 13 0
+				 &pioC 14 0
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 4>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 0 /* sda */
+			 &pioA 24 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};

arch/arm/boot/dts/at91sam9g20.dtsi

@@ -1,238 +1,18 @@
 /*
  * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
  *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
- * Licensed under GPLv2 or later.
+ * Licensed under GPLv2.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "at91sam9260.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G20 family SoC";
 	compatible = "atmel,at91sam9g20";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		serial5 = &usart4;
-		serial6 = &usart5;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-	};
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
 
 	memory {
 		reg = <0x20000000 0x08000000>;
 	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <2>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-			};
-
-			ramc0: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
-				reg = <0xfffffc00 0x100>;
-			};
-
-			rstc@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4>;
-			};
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 4 18 4 19 4>;
-			};
-
-			tcb1: timer@fffdc000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffdc000 0x100>;
-				interrupts = <26 4 27 4 28 4>;
-			};
-
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 4>;
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				interrupts = <6 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				interrupts = <7 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				interrupts = <8 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart3: serial@fffd0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd0000 0x200>;
-				interrupts = <23 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart4: serial@fffd4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd4000 0x200>;
-				interrupts = <24 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart5: serial@fffd8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd8000 0x200>;
-				interrupts = <25 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffc4000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xfffc4000 0x100>;
-				interrupts = <21 4>;
-				status = "disabled";
-			};
-
-			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
-				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 4>;
-				status = "disabled";
-			};
-		};
-
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			       0xffffe800 0x200
-			      >;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioC 13 0
-				 &pioC 14 0
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x100000>;
-			interrupts = <20 4>;
-			status = "disabled";
-		};
-	};
-
-	i2c@0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 23 0 /* sda */
-			 &pioA 24 0 /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
 };

arch/arm/mach-at91/Makefile.boot

@@ -14,6 +14,7 @@ initrd_phys-y	:= 0x20410000
 endif
 
 # Keep dtb files sorted alphabetically for each SoC
+# sam9260
 # sam9g20
 dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
 # sam9g45