Merge tag 'omap-pm-v3.10/cleanup/cpuidle-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into pm-cpuidle

OMAP CPUidle cleanups for v3.10 from Kevin Hilman

Documentation/ABI/testing/sysfs-devices-lpss_ltr

@@ -0,0 +1,44 @@
+What:		/sys/devices/.../lpss_ltr/
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ directory is only present for
+		devices included into the Intel Lynxpoint Low Power Subsystem
+		(LPSS).  If present, it contains attributes containing the LTR
+		mode and the values of LTR registers of the device.
+
+What:		/sys/devices/.../lpss_ltr/ltr_mode
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ltr_mode attribute contains an
+		integer number (0 or 1) indicating whether or not the devices'
+		LTR functionality is working in the software mode (1).
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/auto_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's AUTO_LTR register (raw)
+		represented as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/sw_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's SW_LTR register (raw) represented
+		as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -18,6 +18,32 @@ Description:
 		yoffset: The number of pixels between the top of the screen
 			 and the top edge of the image.
 
+What:		/sys/firmware/acpi/hotplug/
+Date:		February 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		There are separate hotplug profiles for different classes of
+		devices supported by ACPI, such as containers, memory modules,
+		processors, PCI root bridges etc.  A hotplug profile for a given
+		class of devices is a collection of settings defining the way
+		that class of devices will be handled by the ACPI core hotplug
+		code.  Those profiles are represented in sysfs as subdirectories
+		of /sys/firmware/acpi/hotplug/.
+
+		The following setting is available to user space for each
+		hotplug profile:
+
+		enabled: If set, the ACPI core will handle notifications of
+			hotplug events associated with the given class of
+			devices and will allow those devices to be ejected with
+			the help of the _EJ0 control method.  Unsetting it
+			effectively disables hotplug for the correspoinding
+			class of devices.
+
+		The value of the above attribute is an integer number: 1 (set)
+		or 0 (unset).  Attempts to write any other values to it will
+		cause -EINVAL to be returned.
+
 What:		/sys/firmware/acpi/interrupts/
 Date:		February 2008
 Contact:	Len Brown <lenb@kernel.org>

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
     power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
-    power_save_controller - Support runtime D3 of HD-audio controller
-		(-1 = on for supported chip (default), false = off,
-		 true = force to on even for unsupported hardware)
+    power_save_controller - Reset HD-audio controller in power-saving mode
+		(default = on)
     align_buffer_size - Force rounding of buffer/period sizes to multiples
     		      of 128 bytes. This is more efficient in terms of memory
 		      access but isn't required by the HDA spec and prevents

MAINTAINERS

@@ -5065,9 +5065,8 @@ S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
 
 MARVELL LIBERTAS WIRELESS DRIVER
-M:	Dan Williams <dcbw@redhat.com>
 L:	libertas-dev@lists.infradead.org
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
@@ -5569,6 +5568,7 @@ F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
 
 NETXEN (1/10) GbE SUPPORT
+M:	Manish Chopra <manish.chopra@qlogic.com>
 M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
 L:	netdev@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/alpha/Makefile

@@ -12,7 +12,7 @@ NM := $(NM) -B
 
 LDFLAGS_vmlinux	:= -static -N #-relax
 CHECKFLAGS	+= -D__alpha__ -m64
-cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4

arch/alpha/include/asm/floppy.h

@@ -26,7 +26,7 @@
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
 #define fd_cacheflush(addr,size) /* nothing */
 #define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt,\
-					    IRQF_DISABLED, "floppy", NULL)
+					    0, "floppy", NULL)
 #define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL)
 
 #ifdef CONFIG_PCI

arch/alpha/kernel/irq.c

@@ -117,13 +117,6 @@ handle_irq(int irq)
 		return;
 	}
 
-	/*
-	 * From here we must proceed with IPL_MAX. Note that we do not
-	 * explicitly enable interrupts afterwards - some MILO PALcode
-	 * (namely LX164 one) seems to have severe problems with RTI
-	 * at IPL 0.
-	 */
-	local_irq_disable();
 	irq_enter();
 	generic_handle_irq_desc(irq, desc);
 	irq_exit();

arch/alpha/kernel/irq_alpha.c

@@ -45,6 +45,14 @@ do_entInt(unsigned long type, unsigned long vector,
 	  unsigned long la_ptr, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
+
+	/*
+	 * Disable interrupts during IRQ handling.
+	 * Note that there is no matching local_irq_enable() due to
+	 * severe problems with RTI at IPL0 and some MILO PALcode
+	 * (namely LX164).
+	 */
+	local_irq_disable();
 	switch (type) {
 	case 0:
 #ifdef CONFIG_SMP
@@ -62,7 +70,6 @@ do_entInt(unsigned long type, unsigned long vector,
 	  {
 		long cpu;
 
-		local_irq_disable();
 		smp_percpu_timer_interrupt(regs);
 		cpu = smp_processor_id();
 		if (cpu != boot_cpuid) {
@@ -222,7 +229,6 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 
 struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
 	.name		= "timer",
 };
 

arch/alpha/kernel/sys_nautilus.c

@@ -188,6 +188,10 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 extern void free_reserved_mem(void *, void *);
 extern void pcibios_claim_one_bus(struct pci_bus *);
 
+static struct resource irongate_io = {
+	.name	= "Irongate PCI IO",
+	.flags	= IORESOURCE_IO,
+};
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -209,6 +213,7 @@ nautilus_init_pci(void)
 
 	irongate = pci_get_bus_and_slot(0, 0);
 	bus->self = irongate;
+	bus->resource[0] = &irongate_io;
 	bus->resource[1] = &irongate_mem;
 
 	pci_bus_size_bridges(bus);

arch/alpha/kernel/sys_titan.c

@@ -280,15 +280,15 @@ titan_late_init(void)
 	 * all reported to the kernel as machine checks, so the handler
 	 * is a nop so it can be called to count the individual events.
 	 */
-	titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(63+16, titan_intr_nop, 0,
 		    "CChip Error", NULL);
-	titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(62+16, titan_intr_nop, 0,
 		    "PChip 0 H_Error", NULL);
-	titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(61+16, titan_intr_nop, 0,
 		    "PChip 1 H_Error", NULL);
-	titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(60+16, titan_intr_nop, 0,
 		    "PChip 0 C_Error", NULL);
-	titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(59+16, titan_intr_nop, 0,
 		    "PChip 1 C_Error", NULL);
 
 	/* 
@@ -348,9 +348,9 @@ privateer_init_pci(void)
 	 * Hook a couple of extra err interrupts that the
 	 * common titan code won't.
 	 */
-	titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(53+16, titan_intr_nop, 0,
 		    "NMI", NULL);
-	titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(50+16, titan_intr_nop, 0,
 		    "Temperature Warning", NULL);
 
 	/*

arch/arm/Kconfig

@@ -1183,9 +1183,9 @@ config ARM_NR_BANKS
 	default 8
 
 config IWMMXT
-	bool "Enable iWMMXt support"
+	bool "Enable iWMMXt support" if !CPU_PJ4
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || ARCH_MMP
+	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1439,6 +1439,16 @@ config ARM_ERRATA_775420
 	 to deadlock. This workaround puts DSB before executing ISB if
 	 an abort may occur on cache maintenance.
 
+config ARM_ERRATA_798181
+	bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+	depends on CPU_V7 && SMP
+	help
+	  On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+	  adequately shooting down all use of the old entries. This
+	  option enables the Linux kernel workaround for this erratum
+	  which sends an IPI to the CPUs that are running the same ASID
+	  as the one being invalidated.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -54,7 +54,7 @@
 		};
 
 		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins2>;
+			pinctrl-0 = <&sdio_pins3>;
 			pinctrl-names = "default";
 			status = "okay";
 			/*

arch/arm/boot/dts/armada-370.dtsi

@@ -59,6 +59,12 @@
 					     "mpp50", "mpp51", "mpp52";
 			      marvell,function = "sd0";
 			};
+
+			sdio_pins3: sdio-pins3 {
+			      marvell,pins = "mpp48", "mpp49", "mpp50",
+					     "mpp51", "mpp52", "mpp53";
+			      marvell,function = "sd0";
+			};
 	        };
 
 		gpio0: gpio@d0018100 {

arch/arm/boot/dts/dbx5x0.dtsi

@@ -191,8 +191,8 @@
 
 		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>;
-			reg-names = "prcmu";
+			reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
 			#size-cells = <1>;

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -77,6 +77,7 @@
 		};
 
 		nand@3000000 {
+			chip-delay = <40>;
 			status = "okay";
 
 			partition@0 {

arch/arm/boot/dts/orion5x.dtsi

@@ -13,6 +13,9 @@
 	compatible = "marvell,orion5x";
 	interrupt-parent = <&intc>;
 
+	aliases {
+		gpio0 = &gpio0;
+	};
 	intc: interrupt-controller {
 		compatible = "marvell,orion-intc", "marvell,intc";
 		interrupt-controller;
@@ -32,7 +35,9 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10100 0x40>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <6>, <7>, <8>, <9>;
 		};
 
@@ -91,7 +96,7 @@
 			reg = <0x90000 0x10000>,
 			      <0xf2200000 0x800>;
 			reg-names = "regs", "sram";
-			interrupts = <22>;
+			interrupts = <28>;
 			status = "okay";
 		};
 	};

arch/arm/include/asm/delay.h

@@ -24,7 +24,7 @@ extern struct arm_delay_ops {
 	void (*delay)(unsigned long);
 	void (*const_udelay)(unsigned long);
 	void (*udelay)(unsigned long);
-	bool const_clock;
+	unsigned long ticks_per_jiffy;
 } arm_delay_ops;
 
 #define __delay(n)		arm_delay_ops.delay(n)

arch/arm/include/asm/highmem.h

@@ -41,6 +41,13 @@ extern void kunmap_high(struct page *page);
 #endif
 #endif
 
+/*
+ * Needed to be able to broadcast the TLB invalidation for kmap.
+ */
+#ifdef CONFIG_ARM_ERRATA_798181
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#endif
+
 #ifdef ARCH_NEEDS_KMAP_HIGH_GET
 extern void *kmap_high_get(struct page *page);
 #else

arch/arm/include/asm/mmu_context.h

@@ -27,6 +27,8 @@ void __check_vmalloc_seq(struct mm_struct *mm);
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
 #define init_new_context(tsk,mm)	({ atomic64_set(&mm->context.id, 0); 0; })
 
+DECLARE_PER_CPU(atomic64_t, active_asids);
+
 #else	/* !CONFIG_CPU_HAS_ASID */
 
 #ifdef CONFIG_MMU

arch/arm/include/asm/tlbflush.h

@@ -450,6 +450,21 @@ static inline void local_flush_bp_all(void)
 		isb();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+	/*
+	 * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
+	 */
+	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+	dsb();
+}
+#else
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+}
+#endif
+
 /*
  *	flush_pmd_entry
  *

arch/arm/kernel/entry-common.S

@@ -276,7 +276,13 @@ ENDPROC(ftrace_graph_caller_old)
  */
 
 .macro mcount_enter
+/*
+ * This pad compensates for the push {lr} at the call site.  Note that we are
+ * unable to unwind through a function which does not otherwise save its lr.
+ */
+ UNWIND(.pad	#4)
 	stmdb	sp!, {r0-r3, lr}
+ UNWIND(.save	{r0-r3, lr})
 .endm
 
 .macro mcount_get_lr reg
@@ -289,6 +295,7 @@ ENDPROC(ftrace_graph_caller_old)
 .endm
 
 ENTRY(__gnu_mcount_nc)
+UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
 	mov	ip, lr
 	ldmia	sp!, {lr}
@@ -296,17 +303,22 @@ ENTRY(__gnu_mcount_nc)
 #else
 	__mcount
 #endif
+UNWIND(.fnend)
 ENDPROC(__gnu_mcount_nc)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller)
+UNWIND(.fnstart)
 	__ftrace_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_caller)
 #endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
+UNWIND(.fnstart)
 	__ftrace_graph_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_graph_caller)
 #endif
 

arch/arm/kernel/head.S

@@ -267,7 +267,7 @@ __create_page_tables:
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
-#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
+#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
 	sub	r4, r4, #4			@ Fixup page table pointer
 						@ for 64-bit descriptors
 #endif

arch/arm/kernel/hw_breakpoint.c

@@ -966,7 +966,7 @@ static void reset_ctrl_regs(void *unused)
 	}
 
 	if (err) {
-		pr_warning("CPU %d debug is powered down!\n", cpu);
+		pr_warn_once("CPU %d debug is powered down!\n", cpu);
 		cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
 		return;
 	}
@@ -987,7 +987,7 @@ clear_vcr:
 	isb();
 
 	if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-		pr_warning("CPU %d failed to disable vector catch\n", cpu);
+		pr_warn_once("CPU %d failed to disable vector catch\n", cpu);
 		return;
 	}
 
@@ -1007,7 +1007,7 @@ clear_vcr:
 	}
 
 	if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-		pr_warning("CPU %d failed to clear debug register pairs\n", cpu);
+		pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu);
 		return;
 	}
 

arch/arm/kernel/setup.c

@@ -353,6 +353,23 @@ void __init early_print(const char *str, ...)
 	printk("%s", buf);
 }
 
+static void __init cpuid_init_hwcaps(void)
+{
+	unsigned int divide_instrs;
+
+	if (cpu_architecture() < CPU_ARCH_ARMv7)
+		return;
+
+	divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24;
+
+	switch (divide_instrs) {
+	case 2:
+		elf_hwcap |= HWCAP_IDIVA;
+	case 1:
+		elf_hwcap |= HWCAP_IDIVT;
+	}
+}
+
 static void __init feat_v6_fixup(void)
 {
 	int id = read_cpuid_id();
@@ -483,8 +500,11 @@ static void __init setup_processor(void)
 	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
 		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
+
+	cpuid_init_hwcaps();
+
 #ifndef CONFIG_ARM_THUMB
-	elf_hwcap &= ~HWCAP_THUMB;
+	elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
 #endif
 
 	feat_v6_fixup();
@@ -524,7 +544,7 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
 
-#ifndef CONFIG_LPAE
+#ifndef CONFIG_ARM_LPAE
 	if (bank->start + size < bank->start) {
 		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
 			"32-bit physical address space\n", (long long)start);

arch/arm/kernel/smp.c

@@ -673,9 +673,6 @@ static int cpufreq_callback(struct notifier_block *nb,
 	if (freq->flags & CPUFREQ_CONST_LOOPS)
 		return NOTIFY_OK;
 
-	if (arm_delay_ops.const_clock)
-		return NOTIFY_OK;
-
 	if (!per_cpu(l_p_j_ref, cpu)) {
 		per_cpu(l_p_j_ref, cpu) =
 			per_cpu(cpu_data, cpu).loops_per_jiffy;

arch/arm/kernel/smp_tlb.c

@@ -12,6 +12,7 @@
 
 #include <asm/smp_plat.h>
 #include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
 
 /**********************************************************************/
 
@@ -69,12 +70,72 @@ static inline void ipi_flush_bp_all(void *ignored)
 	local_flush_bp_all();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static int erratum_a15_798181(void)
+{
+	unsigned int midr = read_cpuid_id();
+
+	/* Cortex-A15 r0p0..r3p2 affected */
+	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+		return 0;
+	return 1;
+}
+#else
+static int erratum_a15_798181(void)
+{
+	return 0;
+}
+#endif
+
+static void ipi_flush_tlb_a15_erratum(void *arg)
+{
+	dmb();
+}
+
+static void broadcast_tlb_a15_erratum(void)
+{
+	if (!erratum_a15_798181())
+		return;
+
+	dummy_flush_tlb_a15_erratum();
+	smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum,
+			       NULL, 1);
+}
+
+static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
+{
+	int cpu;
+	cpumask_t mask = { CPU_BITS_NONE };
+
+	if (!erratum_a15_798181())
+		return;
+
+	dummy_flush_tlb_a15_erratum();
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		/*
+		 * We only need to send an IPI if the other CPUs are running
+		 * the same ASID as the one being invalidated. There is no
+		 * need for locking around the active_asids check since the
+		 * switch_mm() function has at least one dmb() (as required by
+		 * this workaround) in case a context switch happens on
+		 * another CPU after the condition below.
+		 */
+		if (atomic64_read(&mm->context.id) ==
+		    atomic64_read(&per_cpu(active_asids, cpu)))
+			cpumask_set_cpu(cpu, &mask);
+	}
+	smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
+}
+
 void flush_tlb_all(void)
 {
 	if (tlb_ops_need_broadcast())
 		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
 	else
 		local_flush_tlb_all();
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
@@ -83,6 +144,7 @@ void flush_tlb_mm(struct mm_struct *mm)
 		on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
 	else
 		local_flush_tlb_mm(mm);
+	broadcast_tlb_mm_a15_erratum(mm);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@@ -95,6 +157,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 					&ta, 1);
 	} else
 		local_flush_tlb_page(vma, uaddr);
+	broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -105,6 +168,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
 	} else
 		local_flush_tlb_kernel_page(kaddr);
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
@@ -119,6 +183,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 					&ta, 1);
 	} else
 		local_flush_tlb_range(vma, start, end);
+	broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -130,6 +195,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
 	} else
 		local_flush_tlb_kernel_range(start, end);
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_bp_all(void)

arch/arm/kvm/vgic.c

@@ -883,8 +883,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 			  lr, irq, vgic_cpu->vgic_lr[lr]);
 		BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
 		vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT;
-
-		goto out;
+		return true;
 	}
 
 	/* Try to use another LR for this interrupt */
@@ -898,7 +897,6 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 	vgic_cpu->vgic_irq_lr_map[irq] = lr;
 	set_bit(lr, vgic_cpu->lr_used);
 
-out:
 	if (!vgic_irq_is_edge(vcpu, irq))
 		vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI;
 
@@ -1018,21 +1016,6 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 
 	kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
 
-	/*
-	 * We do not need to take the distributor lock here, since the only
-	 * action we perform is clearing the irq_active_bit for an EOIed
-	 * level interrupt.  There is a potential race with
-	 * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we
-	 * check if the interrupt is already active. Two possibilities:
-	 *
-	 * - The queuing is occurring on the same vcpu: cannot happen,
-	 *   as we're already in the context of this vcpu, and
-	 *   executing the handler
-	 * - The interrupt has been migrated to another vcpu, and we
-	 *   ignore this interrupt for this run. Big deal. It is still
-	 *   pending though, and will get considered when this vcpu
-	 *   exits.
-	 */
 	if (vgic_cpu->vgic_misr & GICH_MISR_EOI) {
 		/*
 		 * Some level interrupts have been EOIed. Clear their
@@ -1054,6 +1037,13 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 			} else {
 				vgic_cpu_irq_clear(vcpu, irq);
 			}
+
+			/*
+			 * Despite being EOIed, the LR may not have
+			 * been marked as empty.
+			 */
+			set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
+			vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
 		}
 	}
 
@@ -1064,9 +1054,8 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 }
 
 /*
- * Sync back the VGIC state after a guest run. We do not really touch
- * the distributor here (the irq_pending_on_cpu bit is safe to set),
- * so there is no need for taking its lock.
+ * Sync back the VGIC state after a guest run. The distributor lock is
+ * needed so we don't get preempted in the middle of the state processing.
  */
 static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
@@ -1112,10 +1101,14 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
 
 void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
 	if (!irqchip_in_kernel(vcpu->kvm))
 		return;
 
+	spin_lock(&dist->lock);
 	__kvm_vgic_sync_hwstate(vcpu);
+	spin_unlock(&dist->lock);
 }
 
 int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)

arch/arm/lib/delay.c

@@ -58,7 +58,7 @@ static void __timer_delay(unsigned long cycles)
 static void __timer_const_udelay(unsigned long xloops)
 {
 	unsigned long long loops = xloops;
-	loops *= loops_per_jiffy;
+	loops *= arm_delay_ops.ticks_per_jiffy;
 	__timer_delay(loops >> UDELAY_SHIFT);
 }
 
@@ -73,11 +73,13 @@ void __init register_current_timer_delay(const struct delay_timer *timer)
 		pr_info("Switching to timer-based delay loop\n");
 		delay_timer			= timer;
 		lpj_fine			= timer->freq / HZ;
-		loops_per_jiffy			= lpj_fine;
+
+		/* cpufreq may scale loops_per_jiffy, so keep a private copy */
+		arm_delay_ops.ticks_per_jiffy	= lpj_fine;
 		arm_delay_ops.delay		= __timer_delay;
 		arm_delay_ops.const_udelay	= __timer_const_udelay;
 		arm_delay_ops.udelay		= __timer_udelay;
-		arm_delay_ops.const_clock	= true;
+
 		delay_calibrated		= true;
 	} else {
 		pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");

arch/arm/mach-cns3xxx/core.c

@@ -22,19 +22,9 @@
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
 	{
-		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,

arch/arm/mach-cns3xxx/include/mach/cns3xxx.h

@@ -94,10 +94,10 @@
 #define RTC_INTR_STS_OFFSET			0x34
 
 #define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
 
 #define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT			0xFB001000
 
 #define PM_CLK_GATE_OFFSET			0x00
 #define PM_SOFT_RST_OFFSET			0x04
@@ -109,7 +109,7 @@
 #define PM_PLL_HM_PD_OFFSET			0x1C
 
 #define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 
 #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
 #define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
@@ -130,7 +130,7 @@
 #define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
 
 #define TIMER1_COUNTER_OFFSET			0x00
 #define TIMER1_AUTO_RELOAD_OFFSET		0x04
@@ -227,16 +227,16 @@
  * Testchip peripheral and fpga gic regions
  */
 #define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
 
 #define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
 
 #define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
 
 #define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
 #define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000

arch/arm/mach-ep93xx/include/mach/uncompress.h

@@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 
 static inline void putc(int c)
 {
-	/* Transmit fifo not full?  */
-	while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
-		;
+	int i;
+
+	for (i = 0; i < 10000; i++) {
+		/* Transmit fifo not full? */
+		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
+			break;
+	}
 
 	__raw_writeb(c, PHYS_UART_DATA);
 }

arch/arm/mach-imx/common.h

@@ -110,6 +110,8 @@ void tzic_handle_irq(struct pt_regs *);
 
 extern void imx_enable_cpu(int cpu, bool enable);
 extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
 extern void v7_cpu_resume(void);
 extern u32 *pl310_get_save_ptr(void);
 #ifdef CONFIG_SMP

arch/arm/mach-imx/hotplug.c

@@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
+	/*
+	 * We use the cpu jumping argument register to sync with
+	 * imx_cpu_kill() which is running on cpu0 and waiting for
+	 * the register being cleared to kill the cpu.
+	 */
+	imx_set_cpu_arg(cpu, ~0);
 	cpu_do_idle();
 }
 
 int imx_cpu_kill(unsigned int cpu)
 {
+	unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+	while (imx_get_cpu_arg(cpu) == 0)
+		if (time_after(jiffies, timeout))
+			return 0;
 	imx_enable_cpu(cpu, false);
+	imx_set_cpu_arg(cpu, 0);
 	return 1;
 }

arch/arm/mach-imx/src.c

@@ -43,6 +43,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
 		       src_base + SRC_GPR1 + cpu * 8);
 }
 
+u32 imx_get_cpu_arg(int cpu)
+{
+	cpu = cpu_logical_map(cpu);
+	return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+	cpu = cpu_logical_map(cpu);
+	writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
 void imx_src_prepare_restart(void)
 {
 	u32 val;

arch/arm/mach-kirkwood/guruplug-setup.c

@@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = {
 
 static struct mvsdio_platform_data guruplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
+	.gpio_card_detect = -1,
+	.gpio_write_protect = -1,
 };
 
 static struct gpio_led guruplug_led_pins[] = {

arch/arm/mach-kirkwood/openrd-setup.c

@@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = {
 
 static struct mvsdio_platform_data openrd_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+	.gpio_write_protect = -1,
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {

arch/arm/mach-kirkwood/rd88f6281-setup.c

@@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
 
 static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
 	.gpio_card_detect = 28,
+	.gpio_write_protect = -1,
 };
 
 static unsigned int rd88f6281_mpp_config[] __initdata = {

arch/arm/mach-msm/timer.c

@@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles,
 {
 	u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
 
-	writel_relaxed(0, event_base + TIMER_CLEAR);
+	ctrl &= ~TIMER_ENABLE_EN;
+	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+	writel_relaxed(ctrl, event_base + TIMER_CLEAR);
 	writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
 	writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
 	return 0;

arch/arm/mach-mvebu/irq-armada-370-xp.c

@@ -44,6 +44,8 @@
 
 #define ARMADA_370_XP_MAX_PER_CPU_IRQS		(28)
 
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ	(5)
+
 #define ACTIVE_DOORBELLS			(8)
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -62,7 +64,7 @@ static void armada_370_xp_irq_mask(struct irq_data *d)
 #ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
 	else
@@ -79,7 +81,7 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
 #ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	else
@@ -147,7 +149,7 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 	writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	irq_set_status_flags(virq, IRQ_LEVEL);
 
-	if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+	if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
 		irq_set_percpu_devid(virq);
 		irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
 					handle_percpu_devid_irq);

arch/arm/mach-omap1/clock_data.c

@@ -538,15 +538,6 @@ static struct clk usb_hhc_ck16xx = {
 };
 
 static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
 	.name		= "usb_dc_ck",
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
@@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck7xx,	CK_7XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX | CK_7XX),
 	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
 	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),

arch/arm/mach-omap2/cclock44xx_data.c

@@ -52,6 +52,13 @@
  */
 #define OMAP4_DPLL_ABE_DEFFREQ				98304000
 
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ				960000000
+
 /* Root clocks */
 
 DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
 		    OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
 		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
 
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+		OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+		OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
 DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
 		OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
 		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"per_mcbsp4_gfclk",			&per_mcbsp4_gfclk,	CK_443X),
 	CLK(NULL,	"hsmmc1_fclk",			&hsmmc1_fclk,	CK_443X),
 	CLK(NULL,	"hsmmc2_fclk",			&hsmmc2_fclk,	CK_443X),
+	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m,	CK_443X),
 	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck,	CK_443X),
 	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1,	CK_443X),
 	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0,	CK_443X),
@@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
 	return 0;
 }

arch/arm/mach-omap2/common.h

@@ -249,7 +249,6 @@ extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
 extern int omap4_finish_suspend(unsigned long cpu_state);
 extern void omap4_cpu_resume(void);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
-extern u32 omap4_mpuss_read_prev_context_state(void);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
 					unsigned int power_state)
@@ -277,10 +276,6 @@ static inline int omap4_finish_suspend(unsigned long cpu_state)
 static inline void omap4_cpu_resume(void)
 {}
 
-static inline u32 omap4_mpuss_read_prev_context_state(void)
-{
-	return 0;
-}
 #endif
 
 struct omap_sdrc_params;
@@ -293,5 +288,8 @@ extern void omap_reserve(void);
 struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
 
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

arch/arm/mach-omap2/cpuidle34xx.c

@@ -359,7 +359,10 @@ int __init omap3_idle_init(void)
 	if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
 		return -ENODEV;
 
-	cpuidle_register_driver(&omap3_idle_driver);
+	if (cpuidle_register_driver(&omap3_idle_driver)) {
+		pr_err("%s: CPUidle driver register failed\n", __func__);
+		return -EIO;
+	}
 
 	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
 	dev->cpu = 0;
@@ -367,6 +370,7 @@ int __init omap3_idle_init(void)
 	if (cpuidle_register_device(dev)) {
 		printk(KERN_ERR "%s: CPUidle register device failed\n",
 		       __func__);
+		cpuidle_unregister_driver(&omap3_idle_driver);
 		return -EIO;
 	}
 

arch/arm/mach-omap2/cpuidle44xx.c

@@ -1,7 +1,7 @@
 /*
- * OMAP4 CPU idle Routines
+ * OMAP4+ CPU idle Routines
  *
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2013 Texas Instruments, Inc.
  * Santosh Shilimkar <santosh.shilimkar@ti.com>
  * Rajendra Nayak <rnayak@ti.com>
  *
@@ -23,13 +23,13 @@
 #include "clockdomain.h"
 
 /* Machine specific information */
-struct omap4_idle_statedata {
+struct idle_statedata {
 	u32 cpu_state;
 	u32 mpu_logic_state;
 	u32 mpu_state;
 };
 
-static struct omap4_idle_statedata omap4_idle_data[] = {
+static struct idle_statedata omap4_idle_data[] = {
 	{
 		.cpu_state = PWRDM_POWER_ON,
 		.mpu_state = PWRDM_POWER_ON,
@@ -52,11 +52,12 @@ static struct clockdomain *cpu_clkdm[NR_CPUS];
 
 static atomic_t abort_barrier;
 static bool cpu_done[NR_CPUS];
+static struct idle_statedata *state_ptr = &omap4_idle_data[0];
 
 /* Private functions */
 
 /**
- * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions
+ * omap_enter_idle_[simple/coupled] - OMAP4PLUS cpuidle entry functions
  * @dev: cpuidle device
  * @drv: cpuidle driver
  * @index: the index of state to be entered
@@ -65,7 +66,7 @@ static bool cpu_done[NR_CPUS];
  * specified low power state selected by the governor.
  * Returns the amount of time spent in the low power state.
  */
-static int omap4_enter_idle_simple(struct cpuidle_device *dev,
+static int omap_enter_idle_simple(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
@@ -76,11 +77,11 @@ static int omap4_enter_idle_simple(struct cpuidle_device *dev,
 	return index;
 }
 
-static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
+static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
-	struct omap4_idle_statedata *cx = &omap4_idle_data[index];
+	struct idle_statedata *cx = state_ptr + index;
 
 	local_fiq_disable();
 
@@ -145,7 +146,8 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
 	 * Call idle CPU cluster PM exit notifier chain
 	 * to restore GIC and wakeupgen context.
 	 */
-	if (omap4_mpuss_read_prev_context_state())
+	if ((cx->mpu_state == PWRDM_POWER_RET) &&
+		(cx->mpu_logic_state == PWRDM_POWER_OFF))
 		cpu_cluster_pm_exit();
 
 fail:
@@ -157,7 +159,7 @@ fail:
 	return index;
 }
 
-static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
+static DEFINE_PER_CPU(struct cpuidle_device, omap_idle_dev);
 
 static struct cpuidle_driver omap4_idle_driver = {
 	.name				= "omap4_idle",
@@ -169,9 +171,9 @@ static struct cpuidle_driver omap4_idle_driver = {
 			.exit_latency = 2 + 2,
 			.target_residency = 5,
 			.flags = CPUIDLE_FLAG_TIME_VALID,
-			.enter = omap4_enter_idle_simple,
+			.enter = omap_enter_idle_simple,
 			.name = "C1",
-			.desc = "MPUSS ON"
+			.desc = "CPUx ON, MPUSS ON"
 		},
 		{
 			/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
@@ -179,9 +181,9 @@ static struct cpuidle_driver omap4_idle_driver = {
 			.target_residency = 960,
 			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
 			         CPUIDLE_FLAG_TIMER_STOP,
-			.enter = omap4_enter_idle_coupled,
+			.enter = omap_enter_idle_coupled,
 			.name = "C2",
-			.desc = "MPUSS CSWR",
+			.desc = "CPUx OFF, MPUSS CSWR",
 		},
 		{
 			/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
@@ -189,9 +191,9 @@ static struct cpuidle_driver omap4_idle_driver = {
 			.target_residency = 1100,
 			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
 			         CPUIDLE_FLAG_TIMER_STOP,
-			.enter = omap4_enter_idle_coupled,
+			.enter = omap_enter_idle_coupled,
 			.name = "C3",
-			.desc = "MPUSS OSWR",
+			.desc = "CPUx OFF, MPUSS OSWR",
 		},
 	},
 	.state_count = ARRAY_SIZE(omap4_idle_data),
@@ -201,9 +203,9 @@ static struct cpuidle_driver omap4_idle_driver = {
 /* Public functions */
 
 /**
- * omap4_idle_init - Init routine for OMAP4 idle
+ * omap4_idle_init - Init routine for OMAP4+ idle
  *
- * Registers the OMAP4 specific cpuidle driver to the cpuidle
+ * Registers the OMAP4+ specific cpuidle driver to the cpuidle
  * framework with the valid set of states.
  */
 int __init omap4_idle_init(void)
@@ -222,16 +224,20 @@ int __init omap4_idle_init(void)
 	if (!cpu_clkdm[0] || !cpu_clkdm[1])
 		return -ENODEV;
 
+	if (cpuidle_register_driver(&omap4_idle_driver)) {
+		pr_err("%s: CPUidle driver register failed\n", __func__);
+		return -EIO;
+	}
+
 	for_each_cpu(cpu_id, cpu_online_mask) {
-		dev = &per_cpu(omap4_idle_dev, cpu_id);
+		dev = &per_cpu(omap_idle_dev, cpu_id);
 		dev->cpu = cpu_id;
 #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 		dev->coupled_cpus = *cpu_online_mask;
 #endif
-		cpuidle_register_driver(&omap4_idle_driver);
-
 		if (cpuidle_register_device(dev)) {
 			pr_err("%s: CPUidle register failed\n", __func__);
+			cpuidle_unregister_driver(&omap4_idle_driver);
 			return -EIO;
 		}
 	}

arch/arm/mach-omap2/io.c

@@ -54,6 +54,12 @@
 #include "prm3xxx.h"
 #include "prm44xx.h"
 
+/*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -397,7 +403,7 @@ void __init omap2420_init_early(void)
 	omap242x_clockdomains_init();
 	omap2420_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2420_clk_init();
+	omap_clk_init = omap2420_clk_init;
 }
 
 void __init omap2420_init_late(void)
@@ -427,7 +433,7 @@ void __init omap2430_init_early(void)
 	omap243x_clockdomains_init();
 	omap2430_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2430_clk_init();
+	omap_clk_init = omap2430_clk_init;
 }
 
 void __init omap2430_init_late(void)
@@ -462,7 +468,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3430_init_early(void)
@@ -500,7 +506,7 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -568,7 +574,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	am33xx_clk_init();
+	omap_clk_init = am33xx_clk_init;
 }
 #endif
 
@@ -593,7 +599,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap4xxx_clk_init();
+	omap_clk_init = omap4xxx_clk_init;
 }
 
 void __init omap4430_init_late(void)

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -139,20 +139,6 @@ static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
 	}
 }
 
-/**
- * omap4_mpuss_read_prev_context_state:
- * Function returns the MPUSS previous context state
- */
-u32 omap4_mpuss_read_prev_context_state(void)
-{
-	u32 reg;
-
-	reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-		OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
-	reg &= OMAP4430_LOSTCONTEXT_DFF_MASK;
-	return reg;
-}
-
 /*
  * Store the CPU cluster state for L2X0 low power operations.
  */

arch/arm/mach-omap2/omap_hwmod.c

@@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		} else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
 			idlemode = HWMOD_IDLEMODE_NO;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)
@@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+		    (oh->flags & HWMOD_FORCE_MSTANDBY)) {
 			idlemode = HWMOD_IDLEMODE_FORCE;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)

arch/arm/mach-omap2/omap_hwmod.h

@@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm {
  *
  * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
  *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ *     out of standby, rather than relying on module smart-standby
  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
  *     XXX Should be HWMOD_SETUP_NO_RESET
@@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm {
  *     correctly, or this is being abused to deal with some PM latency
  *     issues -- but we're currently suffering from a shortage of
  *     folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ *     is kept in force-standby mode. Failing to do so causes PM problems
+ *     with musb on OMAP3630 at least. Note that musb has a dedicated register
+ *     to control MSTANDBY signal when MIDLEMODE is set to force-standby.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_16BIT_REG				(1 << 8)
 #define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 #define HWMOD_BLOCK_WFI				(1 << 10)
+#define HWMOD_FORCE_MSTANDBY			(1 << 11)
 
 /*
  * omap_hwmod._int_flags definitions

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
 	 * broken when autoidle is enabled
 	 * workaround is to disable the autoidle bit at module level.
+	 *
+	 * Enabling the device in any other MIDLEMODE setting but force-idle
+	 * causes core_pwrdm not enter idle states at least on OMAP3630.
+	 * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+	 * signal when MIDLEMODE is set to force-idle.
 	 */
 	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
-				| HWMOD_SWSUP_MSTANDBY,
+				| HWMOD_FORCE_MSTANDBY,
 };
 
 /* usb_otg_hs */

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
 	{ }
 };
 
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+	{ .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
 /* ocp2scp_usb_phy */
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
@@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 		},
 	},
 	.dev_attr	= ocp2scp_dev_attr,
+	.opt_clks	= ocp2scp_usb_phy_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
 };
 
 /*

arch/arm/mach-omap2/timer.c

@@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void)
 			       clksrc_nr, clksrc_src)			\
 void __init omap##name##_gptimer_timer_init(void)			\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);	\
@@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void)			\
 				clksrc_nr, clksrc_src)			\
 void __init omap##name##_sync32k_timer_init(void)		\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	/* Enable the use of clocksource="gp_timer" kernel parameter */	\

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi0_data = {
-	.ios_handler	= mop500_sdi0_ios_handler,
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA |

arch/arm/mach-ux500/board-mop500.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-nomadik.h>
@@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev)
 	regulator_put(prox_regulator);
 }
 
+void mop500_snowball_ethernet_clock_enable(void)
+{
+	struct clk *clk;
+
+	clk = clk_get_sys("fsmc", NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+}
+
 static struct cryp_platform_data u8500_cryp1_platform_data = {
 		.mem_to_engine = {
 				.dir = STEDMA40_MEM_TO_PERIPH,
@@ -683,6 +693,8 @@ static void __init snowball_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
+	mop500_snowball_ethernet_clock_enable();
+
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }

arch/arm/mach-ux500/board-mop500.h

@@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
+void mop500_snowball_ethernet_clock_enable(void);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,

arch/arm/mach-ux500/cpu-db8500.c

@@ -312,9 +312,10 @@ static void __init u8500_init_machine(void)
 	/* Pinmaps must be in place before devices register */
 	if (of_machine_is_compatible("st-ericsson,mop500"))
 		mop500_pinmaps_init();
-	else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pinmaps_init();
-	else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+		mop500_snowball_ethernet_clock_enable();
+	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
 		/* TODO: Add pinmaps for ccu9540 board. */

arch/arm/mm/cache-l2x0.c

@@ -299,7 +299,7 @@ static void l2x0_unlock(u32 cache_id)
 	int lockregs;
 	int i;
 
-	switch (cache_id) {
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
 	case L2X0_CACHE_ID_PART_L310:
 		lockregs = 8;
 		break;
@@ -333,15 +333,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	if (cache_id_part_number_from_dt)
 		cache_id = cache_id_part_number_from_dt;
 	else
-		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
-			& L2X0_CACHE_ID_PART_MASK;
+		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
 	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
 
 	aux &= aux_mask;
 	aux |= aux_val;
 
 	/* Determine the number of ways */
-	switch (cache_id) {
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
 	case L2X0_CACHE_ID_PART_L310:
 		if (aux & (1 << 16))
 			ways = 16;
@@ -725,7 +724,6 @@ static const struct l2x0_of_data pl310_data = {
 		.flush_all   = l2x0_flush_all,
 		.inv_all     = l2x0_inv_all,
 		.disable     = l2x0_disable,
-		.set_debug   = pl310_set_debug,
 	},
 };
 
@@ -814,9 +812,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 		data->save();
 
 	of_init = true;
-	l2x0_init(l2x0_base, aux_val, aux_mask);
-
 	memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
+	l2x0_init(l2x0_base, aux_val, aux_mask);
 
 	return 0;
 }

arch/arm/mm/context.c

@@ -48,7 +48,7 @@ static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
 static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
 static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
 
-static DEFINE_PER_CPU(atomic64_t, active_asids);
+DEFINE_PER_CPU(atomic64_t, active_asids);
 static DEFINE_PER_CPU(u64, reserved_asids);
 static cpumask_t tlb_flush_pending;
 
@@ -215,6 +215,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
 		local_flush_bp_all();
 		local_flush_tlb_all();
+		dummy_flush_tlb_a15_erratum();
 	}
 
 	atomic64_set(&per_cpu(active_asids, cpu), asid);

arch/arm/mm/mmu.c

@@ -598,39 +598,60 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
 
-static void __init alloc_init_section(pud_t *pud, unsigned long addr,
-				      unsigned long end, phys_addr_t phys,
-				      const struct mem_type *type)
+static void __init map_init_section(pmd_t *pmd, unsigned long addr,
+			unsigned long end, phys_addr_t phys,
+			const struct mem_type *type)
 {
-	pmd_t *pmd = pmd_offset(pud, addr);
-
+#ifndef CONFIG_ARM_LPAE
 	/*
-	 * Try a section mapping - end, addr and phys must all be aligned
-	 * to a section boundary.  Note that PMDs refer to the individual
-	 * L1 entries, whereas PGDs refer to a group of L1 entries making
-	 * up one logical pointer to an L2 table.
+	 * In classic MMU format, puds and pmds are folded in to
+	 * the pgds. pmd_offset gives the PGD entry. PGDs refer to a
+	 * group of L1 entries making up one logical pointer to
+	 * an L2 table (2MB), where as PMDs refer to the individual
+	 * L1 entries (1MB). Hence increment to get the correct
+	 * offset for odd 1MB sections.
+	 * (See arch/arm/include/asm/pgtable-2level.h)
 	 */
-	if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
-		pmd_t *p = pmd;
-
-#ifndef CONFIG_ARM_LPAE
-		if (addr & SECTION_SIZE)
-			pmd++;
+	if (addr & SECTION_SIZE)
+		pmd++;
 #endif
+	do {
+		*pmd = __pmd(phys | type->prot_sect);
+		phys += SECTION_SIZE;
+	} while (pmd++, addr += SECTION_SIZE, addr != end);
 
-		do {
-			*pmd = __pmd(phys | type->prot_sect);
-			phys += SECTION_SIZE;
-		} while (pmd++, addr += SECTION_SIZE, addr != end);
+	flush_pmd_entry(pmd);
+}
 
-		flush_pmd_entry(p);
-	} else {
+static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
+				      unsigned long end, phys_addr_t phys,
+				      const struct mem_type *type)
+{
+	pmd_t *pmd = pmd_offset(pud, addr);
+	unsigned long next;
+
+	do {
 		/*
-		 * No need to loop; pte's aren't interested in the
-		 * individual L1 entries.
+		 * With LPAE, we must loop over to map
+		 * all the pmds for the given range.
 		 */
-		alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
-	}
+		next = pmd_addr_end(addr, end);
+
+		/*
+		 * Try a section mapping - addr, next and phys must all be
+		 * aligned to a section boundary.
+		 */
+		if (type->prot_sect &&
+				((addr | next | phys) & ~SECTION_MASK) == 0) {
+			map_init_section(pmd, addr, next, phys, type);
+		} else {
+			alloc_init_pte(pmd, addr, next,
+						__phys_to_pfn(phys), type);
+		}
+
+		phys += next - addr;
+
+	} while (pmd++, addr = next, addr != end);
 }
 
 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
@@ -641,7 +662,7 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 
 	do {
 		next = pud_addr_end(addr, end);
-		alloc_init_section(pud, addr, next, phys, type);
+		alloc_init_pmd(pud, addr, next, phys, type);
 		phys += next - addr;
 	} while (pud++, addr = next, addr != end);
 }

arch/arm/mm/proc-v7.S

@@ -420,7 +420,7 @@ __v7_pj4b_proc_info:
 __v7_ca7mp_proc_info:
 	.long	0x410fc070
 	.long	0xff0ffff0
-	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+	__v7_proc __v7_ca7mp_setup
 	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
 
 	/*
@@ -430,9 +430,24 @@ __v7_ca7mp_proc_info:
 __v7_ca15mp_proc_info:
 	.long	0x410fc0f0
 	.long	0xff0ffff0
-	__v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
+	__v7_proc __v7_ca15mp_setup
 	.size	__v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
 
+	/*
+	 * Qualcomm Inc. Krait processors.
+	 */
+	.type	__krait_proc_info, #object
+__krait_proc_info:
+	.long	0x510f0400		@ Required ID value
+	.long	0xff0ffc00		@ Mask for ID
+	/*
+	 * Some Krait processors don't indicate support for SDIV and UDIV
+	 * instructions in the ARM instruction set, even though they actually
+	 * do support them.
+	 */
+	__v7_proc __v7_setup, hwcaps = HWCAP_IDIV
+	.size	__krait_proc_info, . - __krait_proc_info
+
 	/*
 	 * Match any ARMv7 processor core.
 	 */

arch/mips/Kconfig

@@ -18,7 +18,7 @@ config MIPS
 	select HAVE_KRETPROBES
 	select HAVE_DEBUG_KMEMLEAK
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
-	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
 	select RTC_LIB if !MACH_LOONGSON
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@@ -657,7 +657,7 @@ config SNI_RM
 	bool "SNI RM200/300/400"
 	select FW_ARC if CPU_LITTLE_ENDIAN
 	select FW_ARC32 if CPU_LITTLE_ENDIAN
-	select SNIPROM if CPU_BIG_ENDIAN
+	select FW_SNIPROM if CPU_BIG_ENDIAN
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select CEVT_R4K
@@ -1144,7 +1144,7 @@ config DEFAULT_SGI_PARTITION
 config FW_ARC32
 	bool
 
-config SNIPROM
+config FW_SNIPROM
 	bool
 
 config BOOT_ELF32
@@ -1493,7 +1493,6 @@ config CPU_XLP
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
-	select CPU_HAS_LLSC
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select CPU_HAS_PREFETCH

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -745,10 +745,7 @@ void __init board_prom_init(void)
 		strcpy(cfe_version, "unknown");
 	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
 
-	if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
-		printk(KERN_ERR PFX "invalid nvram checksum\n");
-		return;
-	}
+	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
 
 	board_name = bcm63xx_nvram_get_name();
 	/* find board by name */

arch/mips/bcm63xx/nvram.c

@@ -38,7 +38,7 @@ struct bcm963xx_nvram {
 static struct bcm963xx_nvram nvram;
 static int mac_addr_used;
 
-int __init bcm63xx_nvram_init(void *addr)
+void __init bcm63xx_nvram_init(void *addr)
 {
 	unsigned int check_len;
 	u32 crc, expected_crc;
@@ -60,9 +60,8 @@ int __init bcm63xx_nvram_init(void *addr)
 	crc = crc32_le(~0, (u8 *)&nvram, check_len);
 
 	if (crc != expected_crc)
-		return -EINVAL;
-
-	return 0;
+		pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
+			expected_crc, crc);
 }
 
 u8 *bcm63xx_nvram_get_name(void)

arch/mips/bcm63xx/setup.c

@@ -157,4 +157,4 @@ int __init bcm63xx_register_devices(void)
 	return board_register_devices();
 }
 
-device_initcall(bcm63xx_register_devices);
+arch_initcall(bcm63xx_register_devices);

arch/mips/cavium-octeon/setup.c

@@ -174,7 +174,10 @@ static int octeon_kexec_prepare(struct kimage *image)
 
 static void octeon_generic_shutdown(void)
 {
-	int cpu, i;
+	int i;
+#ifdef CONFIG_SMP
+	int cpu;
+#endif
 	struct cvmx_bootmem_desc *bootmem_desc;
 	void *named_block_array_ptr;
 

arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h

@@ -9,10 +9,8 @@
  *
  * Initialized the local nvram copy from the target address and checks
  * its checksum.
- *
- * Returns 0 on success.
  */
-int __init bcm63xx_nvram_init(void *nvram);
+void bcm63xx_nvram_init(void *nvram);
 
 /**
  * bcm63xx_nvram_get_name() - returns the board name according to nvram

arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h

@@ -28,11 +28,7 @@
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
-#ifdef CONFIG_CPU_HAS_LLSC
 #define cpu_has_llsc		1
-#else
-#define cpu_has_llsc		0
-#endif
 /* #define cpu_has_vtag_icache	? */
 /* #define cpu_has_dc_aliases	? */
 /* #define cpu_has_ic_fills_f_dc ? */

arch/mips/include/asm/mipsregs.h

@@ -1166,7 +1166,10 @@ do {									\
 	unsigned int __dspctl;						\
 									\
 	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
 	"	rddsp	%0, %x1					\n"	\
+	"	.set pop					\n"	\
 	: "=r" (__dspctl)						\
 	: "i" (mask));							\
 	__dspctl;							\
@@ -1175,30 +1178,198 @@ do {									\
 #define wrdsp(val, mask)						\
 do {									\
 	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
 	"	wrdsp	%0, %x1					\n"	\
+	"	.set pop					\n"	\
 	:								\
 	: "r" (val), "i" (mask));					\
 } while (0)
 
-#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
-#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
-#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
-#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
-
-#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
-#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
-#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
-#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
-
-#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
-#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
-#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
-#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
-
-#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
-#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
-#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
-#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+#define mflo0()								\
+({									\
+	long mflo0;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac0					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo0)); 						\
+	mflo0;								\
+})
+
+#define mflo1()								\
+({									\
+	long mflo1;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac1					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo1)); 						\
+	mflo1;								\
+})
+
+#define mflo2()								\
+({									\
+	long mflo2;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac2					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo2)); 						\
+	mflo2;								\
+})
+
+#define mflo3()								\
+({									\
+	long mflo3;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac3					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo3)); 						\
+	mflo3;								\
+})
+
+#define mfhi0()								\
+({									\
+	long mfhi0;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac0					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi0)); 						\
+	mfhi0;								\
+})
+
+#define mfhi1()								\
+({									\
+	long mfhi1;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac1					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi1)); 						\
+	mfhi1;								\
+})
+
+#define mfhi2()								\
+({									\
+	long mfhi2;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac2					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi2)); 						\
+	mfhi2;								\
+})
+
+#define mfhi3()								\
+({									\
+	long mfhi3;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac3					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi3)); 						\
+	mfhi3;								\
+})
+
+
+#define mtlo0(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac0					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo1(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac1					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo2(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac2					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo3(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac3					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi0(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac0					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi1(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac1					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi2(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac2					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi3(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac3					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
 
 #else
 

arch/mips/include/asm/signal.h

@@ -21,6 +21,6 @@
 #include <asm/sigcontext.h>
 #include <asm/siginfo.h>
 
-#define __ARCH_HAS_ODD_SIGACTION
+#define __ARCH_HAS_IRIX_SIGACTION
 
 #endif /* _ASM_SIGNAL_H */

arch/mips/include/uapi/asm/signal.h

@@ -72,6 +72,12 @@ typedef unsigned long old_sigset_t;		/* at least 32 bits */
  *
  * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
  * Unix names RESETHAND and NODEFER respectively.
+ *
+ * SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever
+ * supported its use and no libc was using it, so the entire sa-restorer
+ * functionality was removed with lmo commit 39bffc12c3580ab for 2.5.48
+ * retaining only the SA_RESTORER definition as a reminder to avoid
+ * accidental reuse of the mask bit.
  */
 #define SA_ONSTACK	0x08000000
 #define SA_RESETHAND	0x80000000
@@ -84,8 +90,6 @@ typedef unsigned long old_sigset_t;		/* at least 32 bits */
 #define SA_NOMASK	SA_NODEFER
 #define SA_ONESHOT	SA_RESETHAND
 
-#define SA_RESTORER	0x04000000	/* Only for o32 */
-
 #define MINSIGSTKSZ    2048
 #define SIGSTKSZ       8192
 

arch/mips/kernel/Makefile

@@ -100,29 +100,16 @@ obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
 #
-# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe
-# to enable DSP assembler support here even if the MIPS Release 2 CPU we
-# are targetting does not support DSP because all code-paths making use of
-# it properly check that the running CPU *actually does* support these
-# instructions.
+# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
+# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
+# here because the compiler may use DSP ASE instructions (such as lwx) in
+# code paths where we cannot check that the CPU we are running on supports it.
+# Proper abstraction using HAVE_AS_DSP and macros is done in
+# arch/mips/include/asm/mipsregs.h.
 #
 ifeq ($(CONFIG_CPU_MIPSR2), y)
 CFLAGS_DSP 			= -DHAVE_AS_DSP
 
-#
-# Check if assembler supports DSP ASE
-#
-ifeq ($(call cc-option-yn,-mdsp), y)
-CFLAGS_DSP			+= -mdsp
-endif
-
-#
-# Check if assembler supports DSP ASE Rev2
-#
-ifeq ($(call cc-option-yn,-mdspr2), y)
-CFLAGS_DSP			+= -mdspr2
-endif
-
 CFLAGS_signal.o			= $(CFLAGS_DSP)
 CFLAGS_signal32.o		= $(CFLAGS_DSP)
 CFLAGS_process.o		= $(CFLAGS_DSP)

arch/mips/kernel/cpu-probe.c

@@ -580,6 +580,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		c->tlbsize = 48;
 		break;
 	case PRID_IMP_VR41XX:
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->options = R4K_OPTS;
+		c->tlbsize = 32;
 		switch (c->processor_id & 0xf0) {
 		case PRID_REV_VR4111:
 			c->cputype = CPU_VR4111;
@@ -604,6 +607,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 				__cpu_name[cpu] = "NEC VR4131";
 			} else {
 				c->cputype = CPU_VR4133;
+				c->options |= MIPS_CPU_LLSC;
 				__cpu_name[cpu] = "NEC VR4133";
 			}
 			break;
@@ -613,9 +617,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			__cpu_name[cpu] = "NEC Vr41xx";
 			break;
 		}
-		set_isa(c, MIPS_CPU_ISA_III);
-		c->options = R4K_OPTS;
-		c->tlbsize = 32;
 		break;
 	case PRID_IMP_R4300:
 		c->cputype = CPU_R4300;
@@ -1226,10 +1227,8 @@ __cpuinit void cpu_probe(void)
 	if (c->options & MIPS_CPU_FPU) {
 		c->fpu_id = cpu_get_fpu_id();
 
-		if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M32R2 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R2) {
+		if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+				    MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
 			if (c->fpu_id & MIPS_FPIR_3D)
 				c->ases |= MIPS_ASE_MIPS3D;
 		}

arch/mips/kernel/linux32.c

@@ -171,7 +171,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
 		err = compat_sys_shmctl(first, second, compat_ptr(ptr));
 		break;
 	default:
-		err = -EINVAL;
+		err = -ENOSYS;
 		break;
 	}
 

arch/mips/kernel/mcount.S

@@ -46,10 +46,9 @@
 	PTR_L	a5, PT_R9(sp)
 	PTR_L	a6, PT_R10(sp)
 	PTR_L	a7, PT_R11(sp)
-#else
-	PTR_ADDIU	sp, PT_SIZE
 #endif
-.endm
+	PTR_ADDIU	sp, PT_SIZE
+	.endm
 
 	.macro RETURN_BACK
 	jr ra
@@ -68,7 +67,11 @@ NESTED(ftrace_caller, PT_SIZE, ra)
 	.globl _mcount
 _mcount:
 	b	ftrace_stub
-	addiu sp,sp,8
+#ifdef CONFIG_32BIT
+	 addiu sp,sp,8
+#else
+	 nop
+#endif
 
 	/* When tracing is activated, it calls ftrace_caller+8 (aka here) */
 	lw	t1, function_trace_stop

arch/mips/kernel/proc.c

@@ -67,7 +67,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (cpu_has_mips_r) {
 		seq_printf(m, "isa\t\t\t:");
 		if (cpu_has_mips_1)
-			seq_printf(m, "%s", "mips1");
+			seq_printf(m, "%s", " mips1");
 		if (cpu_has_mips_2)
 			seq_printf(m, "%s", " mips2");
 		if (cpu_has_mips_3)

arch/mips/kernel/traps.c

@@ -1571,7 +1571,7 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu)
 #ifdef CONFIG_64BIT
 	status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
 #endif
-	if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
+	if (current_cpu_data.isa_level & MIPS_CPU_ISA_IV)
 		status_set |= ST0_XX;
 	if (cpu_has_dsp)
 		status_set |= ST0_MX;

arch/mips/lib/bitops.c

@@ -90,12 +90,12 @@ int __mips_test_and_set_bit(unsigned long nr,
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a |= mask;
 	raw_local_irq_restore(flags);
 	return res;
@@ -116,12 +116,12 @@ int __mips_test_and_set_bit_lock(unsigned long nr,
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a |= mask;
 	raw_local_irq_restore(flags);
 	return res;
@@ -141,12 +141,12 @@ int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a &= ~mask;
 	raw_local_irq_restore(flags);
 	return res;
@@ -166,12 +166,12 @@ int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a ^= mask;
 	raw_local_irq_restore(flags);
 	return res;

arch/mips/lib/csum_partial.S

@@ -270,7 +270,7 @@ LEAF(csum_partial)
 #endif
 
 	/* odd buffer alignment? */
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
 	wsbh	v1, sum
 	movn	sum, v1, t7
 #else
@@ -670,7 +670,7 @@ EXC(	sb	t0, NBYTES-2(dst), .Ls_exc)
 	addu	sum, v1
 #endif
 
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
 	wsbh	v1, sum
 	movn	sum, v1, odd
 #else

arch/mips/mm/c-r4k.c

@@ -1247,10 +1247,8 @@ static void __cpuinit setup_scache(void)
 		return;
 
 	default:
-		if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M32R2 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R1 ||
-		    c->isa_level == MIPS_CPU_ISA_M64R2) {
+		if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+				    MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
 #ifdef CONFIG_MIPS_CPU_SCACHE
 			if (mips_sc_init ()) {
 				scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;

arch/mips/mm/sc-mips.c

@@ -98,10 +98,8 @@ static inline int __init mips_sc_probe(void)
 	c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
 
 	/* Ignore anything but MIPSxx processors */
-	if (c->isa_level != MIPS_CPU_ISA_M32R1 &&
-	    c->isa_level != MIPS_CPU_ISA_M32R2 &&
-	    c->isa_level != MIPS_CPU_ISA_M64R1 &&
-	    c->isa_level != MIPS_CPU_ISA_M64R2)
+	if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+			      MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)))
 		return 0;
 
 	/* Does this MIPS32/MIPS64 CPU have a config2 register? */

arch/mips/pci/pci-alchemy.c

@@ -19,7 +19,7 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/tlbmisc.h>
 
-#ifdef CONFIG_DEBUG_PCI
+#ifdef CONFIG_PCI_DEBUG
 #define DBG(x...) printk(KERN_DEBUG x)
 #else
 #define DBG(x...) do {} while (0)
@@ -162,7 +162,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
 	if (status & (1 << 29)) {
 		*data = 0xffffffff;
 		error = -1;
-		DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d",
+		DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d\n",
 		    access_type, bus->number, device);
 	} else if ((status >> 28) & 0xf) {
 		DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n",

arch/s390/include/asm/pgtable.h

@@ -344,6 +344,7 @@ extern unsigned long MODULES_END;
 #define _REGION3_ENTRY_CO	0x100	/* change-recording override	    */
 
 /* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_ORIGIN_LARGE ~0xfffffUL /* large page address	    */
 #define _SEGMENT_ENTRY_ORIGIN	~0x7ffUL/* segment table origin		    */
 #define _SEGMENT_ENTRY_RO	0x200	/* page protection bit		    */
 #define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
@@ -1531,7 +1532,8 @@ extern int s390_enable_sie(void);
 /*
  * No page table caches to initialise
  */
-#define pgtable_cache_init()	do { } while (0)
+static inline void pgtable_cache_init(void) { }
+static inline void check_pgt_cache(void) { }
 
 #include <asm-generic/pgtable.h>
 

arch/s390/lib/uaccess_pt.c

@@ -77,42 +77,69 @@ static size_t copy_in_kernel(size_t count, void __user *to,
  * >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address
  * contains the (negative) exception code.
  */
-static __always_inline unsigned long follow_table(struct mm_struct *mm,
-						  unsigned long addr, int write)
+#ifdef CONFIG_64BIT
+static unsigned long follow_table(struct mm_struct *mm,
+				  unsigned long address, int write)
 {
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *ptep;
+	unsigned long *table = (unsigned long *)__pa(mm->pgd);
+
+	switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
+	case _ASCE_TYPE_REGION1:
+		table = table + ((address >> 53) & 0x7ff);
+		if (unlikely(*table & _REGION_ENTRY_INV))
+			return -0x39UL;
+		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+	case _ASCE_TYPE_REGION2:
+		table = table + ((address >> 42) & 0x7ff);
+		if (unlikely(*table & _REGION_ENTRY_INV))
+			return -0x3aUL;
+		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+	case _ASCE_TYPE_REGION3:
+		table = table + ((address >> 31) & 0x7ff);
+		if (unlikely(*table & _REGION_ENTRY_INV))
+			return -0x3bUL;
+		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+	case _ASCE_TYPE_SEGMENT:
+		table = table + ((address >> 20) & 0x7ff);
+		if (unlikely(*table & _SEGMENT_ENTRY_INV))
+			return -0x10UL;
+		if (unlikely(*table & _SEGMENT_ENTRY_LARGE)) {
+			if (write && (*table & _SEGMENT_ENTRY_RO))
+				return -0x04UL;
+			return (*table & _SEGMENT_ENTRY_ORIGIN_LARGE) +
+				(address & ~_SEGMENT_ENTRY_ORIGIN_LARGE);
+		}
+		table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
+	}
+	table = table + ((address >> 12) & 0xff);
+	if (unlikely(*table & _PAGE_INVALID))
+		return -0x11UL;
+	if (write && (*table & _PAGE_RO))
+		return -0x04UL;
+	return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
+}
 
-	pgd = pgd_offset(mm, addr);
-	if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
-		return -0x3aUL;
+#else /* CONFIG_64BIT */
 
-	pud = pud_offset(pgd, addr);
-	if (pud_none(*pud) || unlikely(pud_bad(*pud)))
-		return -0x3bUL;
+static unsigned long follow_table(struct mm_struct *mm,
+				  unsigned long address, int write)
+{
+	unsigned long *table = (unsigned long *)__pa(mm->pgd);
 
-	pmd = pmd_offset(pud, addr);
-	if (pmd_none(*pmd))
+	table = table + ((address >> 20) & 0x7ff);
+	if (unlikely(*table & _SEGMENT_ENTRY_INV))
 		return -0x10UL;
-	if (pmd_large(*pmd)) {
-		if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO))
-			return -0x04UL;
-		return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK);
-	}
-	if (unlikely(pmd_bad(*pmd)))
-		return -0x10UL;
-
-	ptep = pte_offset_map(pmd, addr);
-	if (!pte_present(*ptep))
+	table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
+	table = table + ((address >> 12) & 0xff);
+	if (unlikely(*table & _PAGE_INVALID))
 		return -0x11UL;
-	if (write && (!pte_write(*ptep) || !pte_dirty(*ptep)))
+	if (write && (*table & _PAGE_RO))
 		return -0x04UL;
-
-	return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK);
+	return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
 }
 
+#endif /* CONFIG_64BIT */
+
 static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr,
 					     size_t n, int write_user)
 {
@@ -197,7 +224,7 @@ size_t copy_to_user_pt(size_t n, void __user *to, const void *from)
 
 static size_t clear_user_pt(size_t n, void __user *to)
 {
-	void *zpage = &empty_zero_page;
+	void *zpage = (void *) empty_zero_page;
 	long done, size, ret;
 
 	done = 0;

arch/tile/kernel/setup.c

@@ -1004,15 +1004,8 @@ void __cpuinit setup_cpu(int boot)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 
-/*
- * Note that the kernel can potentially support other compression
- * techniques than gz, though we don't do so by default.  If we ever
- * decide to do so we can either look for other filename extensions,
- * or just allow a file with this name to be compressed with an
- * arbitrary compressor (somewhat counterintuitively).
- */
 static int __initdata set_initramfs_file;
-static char __initdata initramfs_file[128] = "initramfs.cpio.gz";
+static char __initdata initramfs_file[128] = "initramfs";
 
 static int __init setup_initramfs_file(char *str)
 {
@@ -1026,9 +1019,9 @@ static int __init setup_initramfs_file(char *str)
 early_param("initramfs_file", setup_initramfs_file);
 
 /*
- * We look for an "initramfs.cpio.gz" file in the hvfs.
- * If there is one, we allocate some memory for it and it will be
- * unpacked to the initramfs.
+ * We look for a file called "initramfs" in the hvfs.  If there is one, we
+ * allocate some memory for it and it will be unpacked to the initramfs.
+ * If it's compressed, the initd code will uncompress it first.
  */
 static void __init load_hv_initrd(void)
 {
@@ -1038,10 +1031,16 @@ static void __init load_hv_initrd(void)
 
 	fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
 	if (fd == HV_ENOENT) {
-		if (set_initramfs_file)
+		if (set_initramfs_file) {
 			pr_warning("No such hvfs initramfs file '%s'\n",
 				   initramfs_file);
-		return;
+			return;
+		} else {
+			/* Try old backwards-compatible name. */
+			fd = hv_fs_findfile((HV_VirtAddr)"initramfs.cpio.gz");
+			if (fd == HV_ENOENT)
+				return;
+		}
 	}
 	BUG_ON(fd < 0);
 	stat = hv_fs_fstat(fd);

arch/x86/boot/compressed/Makefile

@@ -4,7 +4,7 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -29,7 +29,6 @@ VMLINUX_OBJS = $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o \
 	$(obj)/piggy.o
 
 $(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone
-$(obj)/efi_stub_$(BITS).o: KBUILD_CLFAGS += -fshort-wchar -mno-red-zone
 
 ifeq ($(CONFIG_EFI_STUB), y)
 	VMLINUX_OBJS += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o
@@ -43,7 +42,7 @@ OBJCOPYFLAGS_vmlinux.bin :=  -R .comment -S
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-targets += vmlinux.bin.all vmlinux.relocs
+targets += $(patsubst $(obj)/%,%,$(VMLINUX_OBJS)) vmlinux.bin.all vmlinux.relocs
 
 CMD_RELOCS = arch/x86/tools/relocs
 quiet_cmd_relocs = RELOCS  $@

arch/x86/include/asm/syscall.h

@@ -29,13 +29,13 @@ extern const unsigned long sys_call_table[];
  */
 static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 {
-	return regs->orig_ax & __SYSCALL_MASK;
+	return regs->orig_ax;
 }
 
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
-	regs->ax = regs->orig_ax & __SYSCALL_MASK;
+	regs->ax = regs->orig_ax;
 }
 
 static inline long syscall_get_error(struct task_struct *task,

arch/x86/kvm/lapic.c

@@ -1857,7 +1857,7 @@ int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data)
 	if (!pv_eoi_enabled(vcpu))
 		return 0;
 	return kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.pv_eoi.data,
-					 addr);
+					 addr, sizeof(u8));
 }
 
 void kvm_lapic_init(void)

arch/x86/kvm/x86.c

@@ -1823,7 +1823,8 @@ static int kvm_pv_enable_async_pf(struct kvm_vcpu *vcpu, u64 data)
 		return 0;
 	}
 
-	if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa))
+	if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa,
+					sizeof(u32)))
 		return 1;
 
 	vcpu->arch.apf.send_user_only = !(data & KVM_ASYNC_PF_SEND_ALWAYS);
@@ -1952,12 +1953,9 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 
 		gpa_offset = data & ~(PAGE_MASK | 1);
 
-		/* Check that the address is 32-byte aligned. */
-		if (gpa_offset & (sizeof(struct pvclock_vcpu_time_info) - 1))
-			break;
-
 		if (kvm_gfn_to_hva_cache_init(vcpu->kvm,
-		     &vcpu->arch.pv_time, data & ~1ULL))
+		     &vcpu->arch.pv_time, data & ~1ULL,
+		     sizeof(struct pvclock_vcpu_time_info)))
 			vcpu->arch.pv_time_enabled = false;
 		else
 			vcpu->arch.pv_time_enabled = true;
@@ -1977,7 +1975,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			return 1;
 
 		if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.st.stime,
-							data & KVM_STEAL_VALID_BITS))
+						data & KVM_STEAL_VALID_BITS,
+						sizeof(struct kvm_steal_time)))
 			return 1;
 
 		vcpu->arch.st.msr_val = data;

drivers/acpi/Kconfig

@@ -334,7 +334,7 @@ config X86_PM_TIMER
 
 config ACPI_CONTAINER
 	bool "Container and Module Devices"
-	default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU || ACPI_HOTPLUG_IO)
+	default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU)
 	help
 	  This driver supports ACPI Container and Module devices (IDs
 	  ACPI0004, PNP0A05, and PNP0A06).
@@ -345,9 +345,8 @@ config ACPI_CONTAINER
 	  the module will be called container.
 
 config ACPI_HOTPLUG_MEMORY
-	tristate "Memory Hotplug"
+	bool "Memory Hotplug"
 	depends on MEMORY_HOTPLUG
-	default n
 	help
 	  This driver supports ACPI memory hotplug.  The driver
 	  fields notifications on ACPI memory devices (PNP0C80),
@@ -396,7 +395,7 @@ config ACPI_CUSTOM_METHOD
 
 config ACPI_BGRT
 	bool "Boottime Graphics Resource Table support"
-	depends on EFI
+	depends on EFI && X86
         help
 	  This driver adds support for exposing the ACPI Boottime Graphics
 	  Resource Table, which allows the operating system to obtain

drivers/acpi/Makefile

@@ -39,6 +39,7 @@ acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o
 acpi-y				+= csrt.o
+acpi-$(CONFIG_X86_INTEL_LPSS)	+= acpi_lpss.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= power.o
 acpi-y				+= event.o

drivers/acpi/acpi_i2c.c

@@ -90,7 +90,7 @@ void acpi_i2c_register_devices(struct i2c_adapter *adapter)
 	acpi_handle handle;
 	acpi_status status;
 
-	handle = ACPI_HANDLE(&adapter->dev);
+	handle = ACPI_HANDLE(adapter->dev.parent);
 	if (!handle)
 		return;
 

drivers/acpi/acpi_lpss.c

@@ -0,0 +1,292 @@
+/*
+ * ACPI support for Intel Lynxpoint LPSS.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/clk-lpss.h>
+#include <linux/pm_runtime.h>
+
+#include "internal.h"
+
+ACPI_MODULE_NAME("acpi_lpss");
+
+#define LPSS_CLK_SIZE	0x04
+#define LPSS_LTR_SIZE	0x18
+
+/* Offsets relative to LPSS_PRIVATE_OFFSET */
+#define LPSS_GENERAL			0x08
+#define LPSS_GENERAL_LTR_MODE_SW	BIT(2)
+#define LPSS_SW_LTR			0x10
+#define LPSS_AUTO_LTR			0x14
+
+struct lpss_device_desc {
+	bool clk_required;
+	const char *clk_parent;
+	bool ltr_required;
+	unsigned int prv_offset;
+};
+
+struct lpss_private_data {
+	void __iomem *mmio_base;
+	resource_size_t mmio_size;
+	struct clk *clk;
+	const struct lpss_device_desc *dev_desc;
+};
+
+static struct lpss_device_desc lpt_dev_desc = {
+	.clk_required = true,
+	.clk_parent = "lpss_clk",
+	.prv_offset = 0x800,
+	.ltr_required = true,
+};
+
+static struct lpss_device_desc lpt_sdio_dev_desc = {
+	.prv_offset = 0x1000,
+	.ltr_required = true,
+};
+
+static const struct acpi_device_id acpi_lpss_device_ids[] = {
+	/* Lynxpoint LPSS devices */
+	{ "INT33C0", (unsigned long)&lpt_dev_desc },
+	{ "INT33C1", (unsigned long)&lpt_dev_desc },
+	{ "INT33C2", (unsigned long)&lpt_dev_desc },
+	{ "INT33C3", (unsigned long)&lpt_dev_desc },
+	{ "INT33C4", (unsigned long)&lpt_dev_desc },
+	{ "INT33C5", (unsigned long)&lpt_dev_desc },
+	{ "INT33C6", (unsigned long)&lpt_sdio_dev_desc },
+	{ "INT33C7", },
+
+	{ }
+};
+
+static int is_memory(struct acpi_resource *res, void *not_used)
+{
+	struct resource r;
+	return !acpi_dev_resource_memory(res, &r);
+}
+
+/* LPSS main clock device. */
+static struct platform_device *lpss_clk_dev;
+
+static inline void lpt_register_clock_device(void)
+{
+	lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
+}
+
+static int register_device_clock(struct acpi_device *adev,
+				 struct lpss_private_data *pdata)
+{
+	const struct lpss_device_desc *dev_desc = pdata->dev_desc;
+
+	if (!lpss_clk_dev)
+		lpt_register_clock_device();
+
+	if (!dev_desc->clk_parent || !pdata->mmio_base
+	    || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
+		return -ENODATA;
+
+	pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev),
+				       dev_desc->clk_parent, 0,
+				       pdata->mmio_base + dev_desc->prv_offset,
+				       0, 0, NULL);
+	if (IS_ERR(pdata->clk))
+		return PTR_ERR(pdata->clk);
+
+	clk_register_clkdev(pdata->clk, NULL, dev_name(&adev->dev));
+	return 0;
+}
+
+static int acpi_lpss_create_device(struct acpi_device *adev,
+				   const struct acpi_device_id *id)
+{
+	struct lpss_device_desc *dev_desc;
+	struct lpss_private_data *pdata;
+	struct resource_list_entry *rentry;
+	struct list_head resource_list;
+	int ret;
+
+	dev_desc = (struct lpss_device_desc *)id->driver_data;
+	if (!dev_desc)
+		return acpi_create_platform_device(adev, id);
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
+	if (ret < 0)
+		goto err_out;
+
+	list_for_each_entry(rentry, &resource_list, node)
+		if (resource_type(&rentry->res) == IORESOURCE_MEM) {
+			pdata->mmio_size = resource_size(&rentry->res);
+			pdata->mmio_base = ioremap(rentry->res.start,
+						   pdata->mmio_size);
+			pdata->dev_desc = dev_desc;
+			break;
+		}
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (dev_desc->clk_required) {
+		ret = register_device_clock(adev, pdata);
+		if (ret) {
+			/*
+			 * Skip the device, but don't terminate the namespace
+			 * scan.
+			 */
+			kfree(pdata);
+			return 0;
+		}
+	}
+
+	adev->driver_data = pdata;
+	ret = acpi_create_platform_device(adev, id);
+	if (ret > 0)
+		return ret;
+
+	adev->driver_data = NULL;
+
+ err_out:
+	kfree(pdata);
+	return ret;
+}
+
+static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
+{
+	struct acpi_device *adev;
+	struct lpss_private_data *pdata;
+	unsigned long flags;
+	int ret;
+
+	ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
+	if (WARN_ON(ret))
+		return ret;
+
+	spin_lock_irqsave(&dev->power.lock, flags);
+	if (pm_runtime_suspended(dev)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+	pdata = acpi_driver_data(adev);
+	if (WARN_ON(!pdata || !pdata->mmio_base)) {
+		ret = -ENODEV;
+		goto out;
+	}
+	*val = readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
+
+ out:
+	spin_unlock_irqrestore(&dev->power.lock, flags);
+	return ret;
+}
+
+static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	u32 ltr_value = 0;
+	unsigned int reg;
+	int ret;
+
+	reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
+	ret = lpss_reg_read(dev, reg, &ltr_value);
+	if (ret)
+		return ret;
+
+	return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
+}
+
+static ssize_t lpss_ltr_mode_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	u32 ltr_mode = 0;
+	char *outstr;
+	int ret;
+
+	ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
+	if (ret)
+		return ret;
+
+	outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
+	return sprintf(buf, "%s\n", outstr);
+}
+
+static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
+static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
+static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
+
+static struct attribute *lpss_attrs[] = {
+	&dev_attr_auto_ltr.attr,
+	&dev_attr_sw_ltr.attr,
+	&dev_attr_ltr_mode.attr,
+	NULL,
+};
+
+static struct attribute_group lpss_attr_group = {
+	.attrs = lpss_attrs,
+	.name = "lpss_ltr",
+};
+
+static int acpi_lpss_platform_notify(struct notifier_block *nb,
+				     unsigned long action, void *data)
+{
+	struct platform_device *pdev = to_platform_device(data);
+	struct lpss_private_data *pdata;
+	struct acpi_device *adev;
+	const struct acpi_device_id *id;
+	int ret = 0;
+
+	id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
+	if (!id || !id->driver_data)
+		return 0;
+
+	if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
+		return 0;
+
+	pdata = acpi_driver_data(adev);
+	if (!pdata || !pdata->mmio_base || !pdata->dev_desc->ltr_required)
+		return 0;
+
+	if (pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
+		dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
+		return 0;
+	}
+
+	if (action == BUS_NOTIFY_ADD_DEVICE)
+		ret = sysfs_create_group(&pdev->dev.kobj, &lpss_attr_group);
+	else if (action == BUS_NOTIFY_DEL_DEVICE)
+		sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
+
+	return ret;
+}
+
+static struct notifier_block acpi_lpss_nb = {
+	.notifier_call = acpi_lpss_platform_notify,
+};
+
+static struct acpi_scan_handler lpss_handler = {
+	.ids = acpi_lpss_device_ids,
+	.attach = acpi_lpss_create_device,
+};
+
+void __init acpi_lpss_init(void)
+{
+	if (!lpt_clk_init()) {
+		bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
+		acpi_scan_add_handler(&lpss_handler);
+	}
+}

drivers/acpi/acpi_memhotplug.c

@@ -1,5 +1,7 @@
 /*
- * Copyright (C) 2004 Intel Corporation <naveen.b.s@intel.com>
+ * Copyright (C) 2004, 2013 Intel Corporation
+ * Author: Naveen B S <naveen.b.s@intel.com>
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
  *
  * All rights reserved.
  *
@@ -25,14 +27,10 @@
  * ranges.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/memory_hotplug.h>
-#include <linux/slab.h>
 #include <linux/acpi.h>
-#include <acpi/acpi_drivers.h>
+#include <linux/memory_hotplug.h>
+
+#include "internal.h"
 
 #define ACPI_MEMORY_DEVICE_CLASS		"memory"
 #define ACPI_MEMORY_DEVICE_HID			"PNP0C80"
@@ -44,32 +42,28 @@
 #define 	PREFIX		"ACPI:memory_hp:"
 
 ACPI_MODULE_NAME("acpi_memhotplug");
-MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
-MODULE_DESCRIPTION("Hotplug Mem Driver");
-MODULE_LICENSE("GPL");
 
 /* Memory Device States */
 #define MEMORY_INVALID_STATE	0
 #define MEMORY_POWER_ON_STATE	1
 #define MEMORY_POWER_OFF_STATE	2
 
-static int acpi_memory_device_add(struct acpi_device *device);
-static int acpi_memory_device_remove(struct acpi_device *device);
+static int acpi_memory_device_add(struct acpi_device *device,
+				  const struct acpi_device_id *not_used);
+static void acpi_memory_device_remove(struct acpi_device *device);
 
 static const struct acpi_device_id memory_device_ids[] = {
 	{ACPI_MEMORY_DEVICE_HID, 0},
 	{"", 0},
 };
-MODULE_DEVICE_TABLE(acpi, memory_device_ids);
 
-static struct acpi_driver acpi_memory_device_driver = {
-	.name = "acpi_memhotplug",
-	.class = ACPI_MEMORY_DEVICE_CLASS,
+static struct acpi_scan_handler memory_device_handler = {
 	.ids = memory_device_ids,
-	.ops = {
-		.add = acpi_memory_device_add,
-		.remove = acpi_memory_device_remove,
-		},
+	.attach = acpi_memory_device_add,
+	.detach = acpi_memory_device_remove,
+	.hotplug = {
+		.enabled = true,
+	},
 };
 
 struct acpi_memory_info {
@@ -79,7 +73,6 @@ struct acpi_memory_info {
 	unsigned short caching;	/* memory cache attribute */
 	unsigned short write_protect;	/* memory read/write attribute */
 	unsigned int enabled:1;
-	unsigned int failed:1;
 };
 
 struct acpi_memory_device {
@@ -153,48 +146,6 @@ acpi_memory_get_device_resources(struct acpi_memory_device *mem_device)
 	return 0;
 }
 
-static int acpi_memory_get_device(acpi_handle handle,
-				  struct acpi_memory_device **mem_device)
-{
-	struct acpi_device *device = NULL;
-	int result = 0;
-
-	acpi_scan_lock_acquire();
-
-	acpi_bus_get_device(handle, &device);
-	if (device)
-		goto end;
-
-	/*
-	 * Now add the notified device.  This creates the acpi_device
-	 * and invokes .add function
-	 */
-	result = acpi_bus_scan(handle);
-	if (result) {
-		acpi_handle_warn(handle, "ACPI namespace scan failed\n");
-		result = -EINVAL;
-		goto out;
-	}
-	result = acpi_bus_get_device(handle, &device);
-	if (result) {
-		acpi_handle_warn(handle, "Missing device object\n");
-		result = -EINVAL;
-		goto out;
-	}
-
- end:
-	*mem_device = acpi_driver_data(device);
-	if (!(*mem_device)) {
-		dev_err(&device->dev, "driver data not found\n");
-		result = -ENODEV;
-		goto out;
-	}
-
- out:
-	acpi_scan_lock_release();
-	return result;
-}
-
 static int acpi_memory_check_device(struct acpi_memory_device *mem_device)
 {
 	unsigned long long current_status;
@@ -249,13 +200,11 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 		 * returns -EEXIST. If add_memory() returns the other error, it
 		 * means that this memory block is not used by the kernel.
 		 */
-		if (result && result != -EEXIST) {
-			info->failed = 1;
+		if (result && result != -EEXIST)
 			continue;
-		}
 
-		if (!result)
-			info->enabled = 1;
+		info->enabled = 1;
+
 		/*
 		 * Add num_enable even if add_memory() returns -EEXIST, so the
 		 * device is bound to this driver.
@@ -286,16 +235,8 @@ static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
 	nid = acpi_get_node(mem_device->device->handle);
 
 	list_for_each_entry_safe(info, n, &mem_device->res_list, list) {
-		if (info->failed)
-			/* The kernel does not use this memory block */
-			continue;
-
 		if (!info->enabled)
-			/*
-			 * The kernel uses this memory block, but it may be not
-			 * managed by us.
-			 */
-			return -EBUSY;
+			continue;
 
 		if (nid < 0)
 			nid = memory_add_physaddr_to_nid(info->start_addr);
@@ -310,95 +251,21 @@ static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
 	return result;
 }
 
-static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
-{
-	struct acpi_memory_device *mem_device;
-	struct acpi_device *device;
-	struct acpi_eject_event *ej_event = NULL;
-	u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
-	acpi_status status;
-
-	switch (event) {
-	case ACPI_NOTIFY_BUS_CHECK:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "\nReceived BUS CHECK notification for device\n"));
-		/* Fall Through */
-	case ACPI_NOTIFY_DEVICE_CHECK:
-		if (event == ACPI_NOTIFY_DEVICE_CHECK)
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "\nReceived DEVICE CHECK notification for device\n"));
-		if (acpi_memory_get_device(handle, &mem_device)) {
-			acpi_handle_err(handle, "Cannot find driver data\n");
-			break;
-		}
-
-		ost_code = ACPI_OST_SC_SUCCESS;
-		break;
-
-	case ACPI_NOTIFY_EJECT_REQUEST:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "\nReceived EJECT REQUEST notification for device\n"));
-
-		status = AE_ERROR;
-		acpi_scan_lock_acquire();
-
-		if (acpi_bus_get_device(handle, &device)) {
-			acpi_handle_err(handle, "Device doesn't exist\n");
-			goto unlock;
-		}
-		mem_device = acpi_driver_data(device);
-		if (!mem_device) {
-			acpi_handle_err(handle, "Driver Data is NULL\n");
-			goto unlock;
-		}
-
-		ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
-		if (!ej_event) {
-			pr_err(PREFIX "No memory, dropping EJECT\n");
-			goto unlock;
-		}
-
-		get_device(&device->dev);
-		ej_event->device = device;
-		ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
-		/* The eject is carried out asynchronously. */
-		status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
-						 ej_event);
-		if (ACPI_FAILURE(status)) {
-			put_device(&device->dev);
-			kfree(ej_event);
-		}
-
- unlock:
-		acpi_scan_lock_release();
-		if (ACPI_SUCCESS(status))
-			return;
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
-
-		/* non-hotplug event; possibly handled by other handler */
-		return;
-	}
-
-	/* Inform firmware that the hotplug operation has completed */
-	(void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL);
-}
-
 static void acpi_memory_device_free(struct acpi_memory_device *mem_device)
 {
 	if (!mem_device)
 		return;
 
 	acpi_memory_free_device_resources(mem_device);
+	mem_device->device->driver_data = NULL;
 	kfree(mem_device);
 }
 
-static int acpi_memory_device_add(struct acpi_device *device)
+static int acpi_memory_device_add(struct acpi_device *device,
+				  const struct acpi_device_id *not_used)
 {
+	struct acpi_memory_device *mem_device;
 	int result;
-	struct acpi_memory_device *mem_device = NULL;
-
 
 	if (!device)
 		return -EINVAL;
@@ -423,147 +290,36 @@ static int acpi_memory_device_add(struct acpi_device *device)
 	/* Set the device state */
 	mem_device->state = MEMORY_POWER_ON_STATE;
 
-	pr_debug("%s\n", acpi_device_name(device));
+	result = acpi_memory_check_device(mem_device);
+	if (result) {
+		acpi_memory_device_free(mem_device);
+		return 0;
+	}
 
-	if (!acpi_memory_check_device(mem_device)) {
-		/* call add_memory func */
-		result = acpi_memory_enable_device(mem_device);
-		if (result) {
-			dev_err(&device->dev,
-				"Error in acpi_memory_enable_device\n");
-			acpi_memory_device_free(mem_device);
-		}
+	result = acpi_memory_enable_device(mem_device);
+	if (result) {
+		dev_err(&device->dev, "acpi_memory_enable_device() error\n");
+		acpi_memory_device_free(mem_device);
+		return -ENODEV;
 	}
-	return result;
+
+	dev_dbg(&device->dev, "Memory device configured by ACPI\n");
+	return 1;
 }
 
-static int acpi_memory_device_remove(struct acpi_device *device)
+static void acpi_memory_device_remove(struct acpi_device *device)
 {
-	struct acpi_memory_device *mem_device = NULL;
-	int result;
+	struct acpi_memory_device *mem_device;
 
 	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
+		return;
 
 	mem_device = acpi_driver_data(device);
-
-	result = acpi_memory_remove_memory(mem_device);
-	if (result)
-		return result;
-
+	acpi_memory_remove_memory(mem_device);
 	acpi_memory_device_free(mem_device);
-
-	return 0;
-}
-
-/*
- * Helper function to check for memory device
- */
-static acpi_status is_memory_device(acpi_handle handle)
-{
-	char *hardware_id;
-	acpi_status status;
-	struct acpi_device_info *info;
-
-	status = acpi_get_object_info(handle, &info);
-	if (ACPI_FAILURE(status))
-		return status;
-
-	if (!(info->valid & ACPI_VALID_HID)) {
-		kfree(info);
-		return AE_ERROR;
-	}
-
-	hardware_id = info->hardware_id.string;
-	if ((hardware_id == NULL) ||
-	    (strcmp(hardware_id, ACPI_MEMORY_DEVICE_HID)))
-		status = AE_ERROR;
-
-	kfree(info);
-	return status;
-}
-
-static acpi_status
-acpi_memory_register_notify_handler(acpi_handle handle,
-				    u32 level, void *ctxt, void **retv)
-{
-	acpi_status status;
-
-
-	status = is_memory_device(handle);
-	if (ACPI_FAILURE(status))
-		return AE_OK;	/* continue */
-
-	status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
-					     acpi_memory_device_notify, NULL);
-	/* continue */
-	return AE_OK;
-}
-
-static acpi_status
-acpi_memory_deregister_notify_handler(acpi_handle handle,
-				      u32 level, void *ctxt, void **retv)
-{
-	acpi_status status;
-
-
-	status = is_memory_device(handle);
-	if (ACPI_FAILURE(status))
-		return AE_OK;	/* continue */
-
-	status = acpi_remove_notify_handler(handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    acpi_memory_device_notify);
-
-	return AE_OK;	/* continue */
-}
-
-static int __init acpi_memory_device_init(void)
-{
-	int result;
-	acpi_status status;
-
-
-	result = acpi_bus_register_driver(&acpi_memory_device_driver);
-
-	if (result < 0)
-		return -ENODEV;
-
-	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-				     ACPI_UINT32_MAX,
-				     acpi_memory_register_notify_handler, NULL,
-				     NULL, NULL);
-
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "walk_namespace failed"));
-		acpi_bus_unregister_driver(&acpi_memory_device_driver);
-		return -ENODEV;
-	}
-
-	return 0;
 }
 
-static void __exit acpi_memory_device_exit(void)
+void __init acpi_memory_hotplug_init(void)
 {
-	acpi_status status;
-
-
-	/*
-	 * Adding this to un-install notification handlers for all the device
-	 * handles.
-	 */
-	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-				     ACPI_UINT32_MAX,
-				     acpi_memory_deregister_notify_handler, NULL,
-				     NULL, NULL);
-
-	if (ACPI_FAILURE(status))
-		ACPI_EXCEPTION((AE_INFO, status, "walk_namespace failed"));
-
-	acpi_bus_unregister_driver(&acpi_memory_device_driver);
-
-	return;
+	acpi_scan_add_handler_with_hotplug(&memory_device_handler, "memory");
 }
-
-module_init(acpi_memory_device_init);
-module_exit(acpi_memory_device_exit);

drivers/acpi/acpi_pad.c

@@ -236,7 +236,7 @@ static int create_power_saving_task(void)
 	ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
 		(void *)(unsigned long)ps_tsk_num,
 		"acpi_pad/%d", ps_tsk_num);
-	rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0;
+	rc = PTR_RET(ps_tsks[ps_tsk_num]);
 	if (!rc)
 		ps_tsk_num++;
 	else

drivers/acpi/acpi_platform.c

@@ -22,9 +22,6 @@
 
 ACPI_MODULE_NAME("platform");
 
-/* Flags for acpi_create_platform_device */
-#define ACPI_PLATFORM_CLK	BIT(0)
-
 /*
  * The following ACPI IDs are known to be suitable for representing as
  * platform devices.
@@ -33,33 +30,9 @@ static const struct acpi_device_id acpi_platform_device_ids[] = {
 
 	{ "PNP0D40" },
 
-	/* Haswell LPSS devices */
-	{ "INT33C0", ACPI_PLATFORM_CLK },
-	{ "INT33C1", ACPI_PLATFORM_CLK },
-	{ "INT33C2", ACPI_PLATFORM_CLK },
-	{ "INT33C3", ACPI_PLATFORM_CLK },
-	{ "INT33C4", ACPI_PLATFORM_CLK },
-	{ "INT33C5", ACPI_PLATFORM_CLK },
-	{ "INT33C6", ACPI_PLATFORM_CLK },
-	{ "INT33C7", ACPI_PLATFORM_CLK },
-
 	{ }
 };
 
-static int acpi_create_platform_clks(struct acpi_device *adev)
-{
-	static struct platform_device *pdev;
-
-	/* Create Lynxpoint LPSS clocks */
-	if (!pdev && !strncmp(acpi_device_hid(adev), "INT33C", 6)) {
-		pdev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
-		if (IS_ERR(pdev))
-			return PTR_ERR(pdev);
-	}
-
-	return 0;
-}
-
 /**
  * acpi_create_platform_device - Create platform device for ACPI device node
  * @adev: ACPI device node to create a platform device for.
@@ -71,10 +44,9 @@ static int acpi_create_platform_clks(struct acpi_device *adev)
  *
  * Name of the platform device will be the same as @adev's.
  */
-static int acpi_create_platform_device(struct acpi_device *adev,
-				       const struct acpi_device_id *id)
+int acpi_create_platform_device(struct acpi_device *adev,
+				const struct acpi_device_id *id)
 {
-	unsigned long flags = id->driver_data;
 	struct platform_device *pdev = NULL;
 	struct acpi_device *acpi_parent;
 	struct platform_device_info pdevinfo;
@@ -83,14 +55,6 @@ static int acpi_create_platform_device(struct acpi_device *adev,
 	struct resource *resources;
 	int count;
 
-	if (flags & ACPI_PLATFORM_CLK) {
-		int ret = acpi_create_platform_clks(adev);
-		if (ret) {
-			dev_err(&adev->dev, "failed to create clocks\n");
-			return ret;
-		}
-	}
-
 	/* If the ACPI node already has a physical device attached, skip it. */
 	if (adev->physical_node_count)
 		return 0;

drivers/acpi/acpica/Makefile

@@ -83,6 +83,7 @@ acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
 acpi-y +=		\
 	nsaccess.o	\
 	nsalloc.o	\
+	nsconvert.o	\
 	nsdump.o	\
 	nseval.o	\
 	nsinit.o	\

drivers/acpi/acpica/acglobal.h

@@ -413,10 +413,12 @@ ACPI_EXTERN u8 acpi_gbl_db_output_flags;
 
 #ifdef ACPI_DISASSEMBLER
 
-u8 ACPI_INIT_GLOBAL(acpi_gbl_ignore_noop_operator, FALSE);
+ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_ignore_noop_operator, FALSE);
 
 ACPI_EXTERN u8 acpi_gbl_db_opt_disasm;
 ACPI_EXTERN u8 acpi_gbl_db_opt_verbose;
+ACPI_EXTERN u8 acpi_gbl_num_external_methods;
+ACPI_EXTERN u32 acpi_gbl_resolved_external_methods;
 ACPI_EXTERN struct acpi_external_list *acpi_gbl_external_list;
 ACPI_EXTERN struct acpi_external_file *acpi_gbl_external_file_list;
 #endif

drivers/acpi/acpica/aclocal.h

@@ -363,6 +363,7 @@ struct acpi_predefined_data {
 	union acpi_operand_object *parent_package;
 	struct acpi_namespace_node *node;
 	u32 flags;
+	u32 return_btype;
 	u8 node_flags;
 };
 
@@ -371,6 +372,20 @@ struct acpi_predefined_data {
 #define ACPI_OBJECT_REPAIRED    1
 #define ACPI_OBJECT_WRAPPED     2
 
+/* Return object auto-repair info */
+
+typedef acpi_status(*acpi_object_converter) (union acpi_operand_object
+					     *original_object,
+					     union acpi_operand_object
+					     **converted_object);
+
+struct acpi_simple_repair_info {
+	char name[ACPI_NAME_SIZE];
+	u32 unexpected_btypes;
+	u32 package_index;
+	acpi_object_converter object_converter;
+};
+
 /*
  * Bitmapped return value types
  * Note: the actual data types must be contiguous, a loop in nspredef.c
@@ -1037,6 +1052,7 @@ struct acpi_external_list {
 	u16 length;
 	u8 type;
 	u8 flags;
+	u8 resolved;
 };
 
 /* Values for Flags field above */

drivers/acpi/acpica/acmacros.h

@@ -322,10 +322,12 @@
  * where a pointer to an object of type union acpi_operand_object can also
  * appear. This macro is used to distinguish them.
  *
- * The "Descriptor" field is the first field in both structures.
+ * The "DescriptorType" field is the second field in both structures.
  */
+#define ACPI_GET_DESCRIPTOR_PTR(d)      (((union acpi_descriptor *)(void *)(d))->common.common_pointer)
+#define ACPI_SET_DESCRIPTOR_PTR(d, p)   (((union acpi_descriptor *)(void *)(d))->common.common_pointer = (p))
 #define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->common.descriptor_type)
-#define ACPI_SET_DESCRIPTOR_TYPE(d, t)  (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)
+#define ACPI_SET_DESCRIPTOR_TYPE(d, t)  (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = (t))
 
 /*
  * Macros for the master AML opcode table

drivers/acpi/acpica/acnamesp.h

@@ -166,6 +166,29 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent);
 
 int acpi_ns_compare_names(char *name1, char *name2);
 
+/*
+ * nsconvert - Dynamic object conversion routines
+ */
+acpi_status
+acpi_ns_convert_to_integer(union acpi_operand_object *original_object,
+			   union acpi_operand_object **return_object);
+
+acpi_status
+acpi_ns_convert_to_string(union acpi_operand_object *original_object,
+			  union acpi_operand_object **return_object);
+
+acpi_status
+acpi_ns_convert_to_buffer(union acpi_operand_object *original_object,
+			  union acpi_operand_object **return_object);
+
+acpi_status
+acpi_ns_convert_to_unicode(union acpi_operand_object *original_object,
+			   union acpi_operand_object **return_object);
+
+acpi_status
+acpi_ns_convert_to_resource(union acpi_operand_object *original_object,
+			    union acpi_operand_object **return_object);
+
 /*
  * nsdump - Namespace dump/print utilities
  */
@@ -289,7 +312,7 @@ acpi_ns_get_attached_data(struct acpi_namespace_node *node,
  * predefined methods/objects
  */
 acpi_status
-acpi_ns_repair_object(struct acpi_predefined_data *data,
+acpi_ns_simple_repair(struct acpi_predefined_data *data,
 		      u32 expected_btypes,
 		      u32 package_index,
 		      union acpi_operand_object **return_object_ptr);