powerpc: Merge smp.c and smp.h

This also moves setup_cpu_maps to setup-common.c (calling it
smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/kernel/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_PPC_OF)		+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 obj-$(CONFIG_6xx)		+= idle_6xx.o
+obj-$(CONFIG_SMP)		+= smp.o
 
 ifeq ($(CONFIG_PPC_ISERIES),y)
 $(obj)/head_64.o: $(obj)/lparmap.s
@@ -49,8 +50,9 @@ endif
 
 else
 # stuff used from here for ARCH=ppc or ARCH=ppc64
+smpobj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_PPC64)		+= traps.o process.o init_task.o time.o \
-				   setup-common.o
+				   setup-common.o $(smpobj-y)
 
 
 endif

arch/powerpc/kernel/setup-common.c

@@ -170,11 +170,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	}
 
 #ifdef CONFIG_SMP
-#ifdef CONFIG_PPC64	/* XXX for now */
 	pvr = per_cpu(pvr, cpu_id);
-#else
-	pvr = cpu_data[cpu_id].pvr;
-#endif
 #else
 	pvr = mfspr(SPRN_PVR);
 #endif
@@ -408,3 +404,118 @@ static int __init set_preferred_console(void)
 }
 console_initcall(set_preferred_console);
 #endif /* CONFIG_PPC_MULTIPLATFORM */
+
+#ifdef CONFIG_SMP
+
+/**
+ * setup_cpu_maps - initialize the following cpu maps:
+ *                  cpu_possible_map
+ *                  cpu_present_map
+ *                  cpu_sibling_map
+ *
+ * Having the possible map set up early allows us to restrict allocations
+ * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
+ *
+ * We do not initialize the online map here; cpus set their own bits in
+ * cpu_online_map as they come up.
+ *
+ * This function is valid only for Open Firmware systems.  finish_device_tree
+ * must be called before using this.
+ *
+ * While we're here, we may as well set the "physical" cpu ids in the paca.
+ */
+void __init smp_setup_cpu_maps(void)
+{
+	struct device_node *dn = NULL;
+	int cpu = 0;
+	int swap_cpuid = 0;
+
+	while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
+		int *intserv;
+		int j, len = sizeof(u32), nthreads = 1;
+
+		intserv = (int *)get_property(dn, "ibm,ppc-interrupt-server#s",
+					      &len);
+		if (intserv)
+			nthreads = len / sizeof(int);
+		else {
+			intserv = (int *) get_property(dn, "reg", NULL);
+			if (!intserv)
+				intserv = &cpu;	/* assume logical == phys */
+		}
+
+		for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
+			cpu_set(cpu, cpu_present_map);
+			set_hard_smp_processor_id(cpu, intserv[j]);
+
+			if (intserv[j] == boot_cpuid_phys)
+				swap_cpuid = cpu;
+			cpu_set(cpu, cpu_possible_map);
+			cpu++;
+		}
+	}
+
+	/* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
+	 * boot cpu is logical 0.
+	 */
+	if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
+		u32 tmp;
+		tmp = get_hard_smp_processor_id(0);
+		set_hard_smp_processor_id(0, boot_cpuid_phys);
+		set_hard_smp_processor_id(swap_cpuid, tmp);
+	}
+
+#ifdef CONFIG_PPC64
+	/*
+	 * On pSeries LPAR, we need to know how many cpus
+	 * could possibly be added to this partition.
+	 */
+	if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
+				(dn = of_find_node_by_path("/rtas"))) {
+		int num_addr_cell, num_size_cell, maxcpus;
+		unsigned int *ireg;
+
+		num_addr_cell = prom_n_addr_cells(dn);
+		num_size_cell = prom_n_size_cells(dn);
+
+		ireg = (unsigned int *)
+			get_property(dn, "ibm,lrdr-capacity", NULL);
+
+		if (!ireg)
+			goto out;
+
+		maxcpus = ireg[num_addr_cell + num_size_cell];
+
+		/* Double maxcpus for processors which have SMT capability */
+		if (cpu_has_feature(CPU_FTR_SMT))
+			maxcpus *= 2;
+
+		if (maxcpus > NR_CPUS) {
+			printk(KERN_WARNING
+			       "Partition configured for %d cpus, "
+			       "operating system maximum is %d.\n",
+			       maxcpus, NR_CPUS);
+			maxcpus = NR_CPUS;
+		} else
+			printk(KERN_INFO "Partition configured for %d cpus.\n",
+			       maxcpus);
+
+		for (cpu = 0; cpu < maxcpus; cpu++)
+			cpu_set(cpu, cpu_possible_map);
+	out:
+		of_node_put(dn);
+	}
+
+	/*
+	 * Do the sibling map; assume only two threads per processor.
+	 */
+	for_each_cpu(cpu) {
+		cpu_set(cpu, cpu_sibling_map[cpu]);
+		if (cpu_has_feature(CPU_FTR_SMT))
+			cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
+	}
+
+	systemcfg->processorCount = num_present_cpus();
+#endif /* CONFIG_PPC64 */
+}
+#endif /* CONFIG_SMP */

arch/powerpc/kernel/setup_32.c

@@ -288,6 +288,8 @@ void __init setup_arch(char **cmdline_p)
 	unflatten_device_tree();
 	finish_device_tree();
 
+	smp_setup_cpu_maps();
+
 #ifdef CONFIG_BOOTX_TEXT
 	init_boot_display();
 #endif

arch/powerpc/kernel/setup_64.c

@@ -181,114 +181,8 @@ static int __init early_smt_enabled(char *p)
 }
 early_param("smt-enabled", early_smt_enabled);
 
-/**
- * setup_cpu_maps - initialize the following cpu maps:
- *                  cpu_possible_map
- *                  cpu_present_map
- *                  cpu_sibling_map
- *
- * Having the possible map set up early allows us to restrict allocations
- * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
- *
- * We do not initialize the online map here; cpus set their own bits in
- * cpu_online_map as they come up.
- *
- * This function is valid only for Open Firmware systems.  finish_device_tree
- * must be called before using this.
- *
- * While we're here, we may as well set the "physical" cpu ids in the paca.
- */
-static void __init setup_cpu_maps(void)
-{
-	struct device_node *dn = NULL;
-	int cpu = 0;
-	int swap_cpuid = 0;
-
-	check_smt_enabled();
-
-	while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
-		u32 *intserv;
-		int j, len = sizeof(u32), nthreads;
-
-		intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s",
-					      &len);
-		if (!intserv)
-			intserv = (u32 *)get_property(dn, "reg", NULL);
-
-		nthreads = len / sizeof(u32);
-
-		for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
-			cpu_set(cpu, cpu_present_map);
-			set_hard_smp_processor_id(cpu, intserv[j]);
-
-			if (intserv[j] == boot_cpuid_phys)
-				swap_cpuid = cpu;
-			cpu_set(cpu, cpu_possible_map);
-			cpu++;
-		}
-	}
-
-	/* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
-	 * boot cpu is logical 0.
-	 */
-	if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
-		u32 tmp;
-		tmp = get_hard_smp_processor_id(0);
-		set_hard_smp_processor_id(0, boot_cpuid_phys);
-		set_hard_smp_processor_id(swap_cpuid, tmp);
-	}
-
-	/*
-	 * On pSeries LPAR, we need to know how many cpus
-	 * could possibly be added to this partition.
-	 */
-	if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
-				(dn = of_find_node_by_path("/rtas"))) {
-		int num_addr_cell, num_size_cell, maxcpus;
-		unsigned int *ireg;
-
-		num_addr_cell = prom_n_addr_cells(dn);
-		num_size_cell = prom_n_size_cells(dn);
-
-		ireg = (unsigned int *)
-			get_property(dn, "ibm,lrdr-capacity", NULL);
-
-		if (!ireg)
-			goto out;
-
-		maxcpus = ireg[num_addr_cell + num_size_cell];
-
-		/* Double maxcpus for processors which have SMT capability */
-		if (cpu_has_feature(CPU_FTR_SMT))
-			maxcpus *= 2;
-
-		if (maxcpus > NR_CPUS) {
-			printk(KERN_WARNING
-			       "Partition configured for %d cpus, "
-			       "operating system maximum is %d.\n",
-			       maxcpus, NR_CPUS);
-			maxcpus = NR_CPUS;
-		} else
-			printk(KERN_INFO "Partition configured for %d cpus.\n",
-			       maxcpus);
-
-		for (cpu = 0; cpu < maxcpus; cpu++)
-			cpu_set(cpu, cpu_possible_map);
-	out:
-		of_node_put(dn);
-	}
-
-	/*
-	 * Do the sibling map; assume only two threads per processor.
-	 */
-	for_each_cpu(cpu) {
-		cpu_set(cpu, cpu_sibling_map[cpu]);
-		if (cpu_has_feature(CPU_FTR_SMT))
-			cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
-	}
-
-	systemcfg->processorCount = num_present_cpus();
-}
+#else
+#define check_smt_enabled()
 #endif /* CONFIG_SMP */
 
 extern struct machdep_calls pSeries_md;
@@ -417,6 +311,8 @@ void smp_release_cpus(void)
 
 	DBG(" <- smp_release_cpus()\n");
 }
+#else
+#define smp_release_cpus()
 #endif /* CONFIG_SMP || CONFIG_KEXEC */
 
 /*
@@ -608,17 +504,13 @@ void __init setup_system(void)
 
 	parse_early_param();
 
-#ifdef CONFIG_SMP
-	/*
-	 * iSeries has already initialized the cpu maps at this point.
-	 */
-	setup_cpu_maps();
+	check_smt_enabled();
+	smp_setup_cpu_maps();
 
 	/* Release secondary cpus out of their spinloops at 0x60 now that
 	 * we can map physical -> logical CPU ids
 	 */
 	smp_release_cpus();
-#endif
 
 	printk("Starting Linux PPC64 %s\n", system_utsname.version);
 

arch/ppc64/kernel/smp.c → arch/powerpc/kernel/smp.c

@@ -39,13 +39,18 @@
 #include <asm/pgtable.h>
 #include <asm/prom.h>
 #include <asm/smp.h>
-#include <asm/paca.h>
 #include <asm/time.h>
+#include <asm/xmon.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
-#include <asm/abs_addr.h>
 #include <asm/mpic.h>
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
+
+int smp_hw_index[NR_CPUS];
+struct thread_info *secondary_ti;
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -60,6 +65,7 @@ cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE };
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 
+/* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
 
 static volatile unsigned int cpu_callin_map[NR_CPUS];
@@ -89,7 +95,9 @@ void __devinit smp_mpic_setup_cpu(int cpu)
 {
 	mpic_setup_this_cpu();
 }
+#endif /* CONFIG_MPIC */
 
+#ifdef CONFIG_PPC64
 void __devinit smp_generic_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -102,8 +110,7 @@ void __devinit smp_generic_kick_cpu(int nr)
 	paca[nr].cpu_start = 1;
 	smp_mb();
 }
-
-#endif /* CONFIG_MPIC */
+#endif
 
 void smp_message_recv(int msg, struct pt_regs *regs)
 {
@@ -111,15 +118,10 @@ void smp_message_recv(int msg, struct pt_regs *regs)
 	case PPC_MSG_CALL_FUNCTION:
 		smp_call_function_interrupt();
 		break;
-	case PPC_MSG_RESCHEDULE: 
+	case PPC_MSG_RESCHEDULE:
 		/* XXX Do we have to do this? */
 		set_need_resched();
 		break;
-#if 0
-	case PPC_MSG_MIGRATE_TASK:
-		/* spare */
-		break;
-#endif
 #ifdef CONFIG_DEBUGGER
 	case PPC_MSG_DEBUGGER_BREAK:
 		debugger_ipi(regs);
@@ -171,8 +173,8 @@ static struct call_data_struct {
 	int wait;
 } *call_data;
 
-/* delay of at least 8 seconds on 1GHz cpu */
-#define SMP_CALL_TIMEOUT (1UL << (30 + 3))
+/* delay of at least 8 seconds */
+#define SMP_CALL_TIMEOUT	8
 
 /*
  * This function sends a 'generic call function' IPI to all other CPUs
@@ -194,7 +196,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 { 
 	struct call_data_struct data;
 	int ret = -1, cpus;
-	unsigned long timeout;
+	u64 timeout;
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
@@ -220,11 +222,12 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 	/* Send a message to all other CPUs and wait for them to respond */
 	smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION);
 
+	timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec;
+
 	/* Wait for response */
-	timeout = SMP_CALL_TIMEOUT;
 	while (atomic_read(&data.started) != cpus) {
 		HMT_low();
-		if (--timeout == 0) {
+		if (get_tb() >= timeout) {
 			printk("smp_call_function on cpu %d: other cpus not "
 			       "responding (%d)\n", smp_processor_id(),
 			       atomic_read(&data.started));
@@ -234,10 +237,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 	}
 
 	if (wait) {
-		timeout = SMP_CALL_TIMEOUT;
 		while (atomic_read(&data.finished) != cpus) {
 			HMT_low();
-			if (--timeout == 0) {
+			if (get_tb() >= timeout) {
 				printk("smp_call_function on cpu %d: other "
 				       "cpus not finishing (%d/%d)\n",
 				       smp_processor_id(),
@@ -251,7 +253,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 
 	ret = 0;
 
-out:
+ out:
 	call_data = NULL;
 	HMT_medium();
 	spin_unlock(&call_lock);
@@ -313,8 +315,11 @@ static void __init smp_create_idle(unsigned int cpu)
 	p = fork_idle(cpu);
 	if (IS_ERR(p))
 		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
+#ifdef CONFIG_PPC64
 	paca[cpu].__current = p;
+#endif
 	current_set[cpu] = p->thread_info;
+	p->thread_info->cpu = cpu;
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -333,18 +338,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	smp_store_cpu_info(boot_cpuid);
 	cpu_callin_map[boot_cpuid] = 1;
 
-#ifndef CONFIG_PPC_ISERIES
-	paca[boot_cpuid].next_jiffy_update_tb = tb_last_stamp = get_tb();
-
-	/*
-	 * Should update do_gtod.stamp_xsec.
-	 * For now we leave it which means the time can be some
-	 * number of msecs off until someone does a settimeofday()
-	 */
-	do_gtod.varp->tb_orig_stamp = tb_last_stamp;
-	systemcfg->tb_orig_stamp = tb_last_stamp;
-#endif
-
 	max_cpus = smp_ops->probe();
  
 	smp_space_timers(max_cpus);
@@ -359,8 +352,9 @@ void __devinit smp_prepare_boot_cpu(void)
 	BUG_ON(smp_processor_id() != boot_cpuid);
 
 	cpu_set(boot_cpuid, cpu_online_map);
-
+#ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
+#endif
 	current_set[boot_cpuid] = current->thread_info;
 }
 
@@ -444,13 +438,16 @@ int __devinit __cpu_up(unsigned int cpu)
 {
 	int c;
 
+	secondary_ti = current_set[cpu];
 	if (!cpu_enable(cpu))
 		return 0;
 
 	if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
 		return -EINVAL;
 
+#ifdef CONFIG_PPC64
 	paca[cpu].default_decr = tb_ticks_per_jiffy;
+#endif
 
 	/* Make sure callin-map entry is 0 (can be leftover a CPU
 	 * hotplug
@@ -513,7 +510,7 @@ int __devinit start_secondary(void *unused)
 	current->active_mm = &init_mm;
 
 	smp_store_cpu_info(cpu);
-	set_dec(paca[cpu].default_decr);
+	set_dec(tb_ticks_per_jiffy);
 	cpu_callin_map[cpu] = 1;
 
 	smp_ops->setup_cpu(cpu);

arch/powerpc/platforms/chrp/smp.c

@@ -35,43 +35,6 @@
 #include <asm/smp.h>
 #include <asm/mpic.h>
 
-extern unsigned long smp_chrp_cpu_nr;
-
-static int __init smp_chrp_probe(void)
-{
-	struct device_node *cpus = NULL;
-	unsigned int *reg;
-	int reglen;
-	int ncpus = 0;
-	int cpuid;
-	unsigned int phys;
-
-	/* Count CPUs in the device-tree */
-	cpuid = 1;	/* the boot cpu is logical cpu 0 */
-	while ((cpus = of_find_node_by_type(cpus, "cpu")) != NULL) {
-		phys = ncpus;
-		reg = (unsigned int *) get_property(cpus, "reg", &reglen);
-		if (reg && reglen >= sizeof(unsigned int))
-			/* hmmm, not having a reg property would be bad */
-			phys = *reg;
-		if (phys != boot_cpuid_phys) {
-			set_hard_smp_processor_id(cpuid, phys);
-			++cpuid;
-		}
-	       	++ncpus;
-	}
-
-	printk(KERN_INFO "CHRP SMP probe found %d cpus\n", ncpus);
-
-	/* Nothing more to do if less than 2 of them */
-	if (ncpus <= 1)
-		return 1;
-
-	mpic_request_ipis();
-
-	return ncpus;
-}
-
 static void __devinit smp_chrp_kick_cpu(int nr)
 {
 	*(unsigned long *)KERNELBASE = nr;
@@ -114,7 +77,7 @@ void __devinit smp_chrp_take_timebase(void)
 /* CHRP with openpic */
 struct smp_ops_t chrp_smp_ops = {
 	.message_pass = smp_mpic_message_pass,
-	.probe = smp_chrp_probe,
+	.probe = smp_mpic_probe,
 	.kick_cpu = smp_chrp_kick_cpu,
 	.setup_cpu = smp_chrp_setup_cpu,
 	.give_timebase = smp_chrp_give_timebase,

arch/ppc/kernel/Makefile

@@ -45,7 +45,6 @@ obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_KGDB)		+= ppc-stub.o
-obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
 obj-$(CONFIG_TAU)		+= temp.o
 ifndef CONFIG_E200
 obj-$(CONFIG_FSL_BOOKE)		+= perfmon_fsl_booke.o

arch/ppc/kernel/irq.c

@@ -126,7 +126,7 @@ skip:
 			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
 		}
 #endif
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
 		/* should this be per processor send/receive? */
 		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
 				atomic_read(&ipi_recv), atomic_read(&ipi_sent));

arch/ppc64/kernel/Makefile

@@ -33,7 +33,6 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o
 obj-$(CONFIG_EEH)		+= eeh.o
 obj-$(CONFIG_PROC_FS)		+= proc_ppc64.o
-obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_MODULES)		+= module.o
 ifneq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o

include/asm-ppc64/smp.h → include/asm-powerpc/smp.h

@@ -1,5 +1,5 @@
 /* 
- * smp.h: PPC64 specific SMP code.
+ * smp.h: PowerPC-specific SMP code.
  *
  * Original was a copy of sparc smp.h.  Now heavily modified
  * for PPC.
@@ -13,9 +13,9 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#ifndef _ASM_POWERPC_SMP_H
+#define _ASM_POWERPC_SMP_H
 #ifdef __KERNEL__
-#ifndef _PPC64_SMP_H
-#define _PPC64_SMP_H
 
 #include <linux/config.h>
 #include <linux/threads.h>
@@ -24,7 +24,9 @@
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_PPC64
 #include <asm/paca.h>
+#endif
 
 extern int boot_cpuid;
 extern int boot_cpuid_phys;
@@ -45,8 +47,19 @@ void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
 #endif
 
+#ifdef CONFIG_PPC64
 #define raw_smp_processor_id()	(get_paca()->paca_index)
 #define hard_smp_processor_id() (get_paca()->hw_cpu_id)
+#else
+/* 32-bit */
+extern int smp_hw_index[];
+
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+#define hard_smp_processor_id() 	(smp_hw_index[smp_processor_id()])
+#define get_hard_smp_processor_id(cpu)	(smp_hw_index[(cpu)])
+#define set_hard_smp_processor_id(cpu, phys)\
+					(smp_hw_index[(cpu)] = (phys))
+#endif
 
 extern cpumask_t cpu_sibling_map[NR_CPUS];
 
@@ -65,21 +78,35 @@ extern cpumask_t cpu_sibling_map[NR_CPUS];
 void smp_init_iSeries(void);
 void smp_init_pSeries(void);
 void smp_init_cell(void);
+void smp_setup_cpu_maps(void);
 
 extern int __cpu_disable(void);
 extern void __cpu_die(unsigned int cpu);
+
+#else
+/* for UP */
+#define smp_setup_cpu_maps()
+#define smp_release_cpus()
+
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_PPC64
 #define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
 #define set_hard_smp_processor_id(CPU, VAL) \
 	do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
+#else
+/* 32-bit */
+#ifndef CONFIG_SMP
+#define get_hard_smp_processor_id(cpu) 	boot_cpuid_phys
+#define set_hard_smp_processor_id(cpu, phys)
+#endif
+#endif
 
 extern int smt_enabled_at_boot;
 
 extern int smp_mpic_probe(void);
 extern void smp_mpic_setup_cpu(int cpu);
 extern void smp_generic_kick_cpu(int nr);
-extern void smp_release_cpus(void);
 
 extern void smp_generic_give_timebase(void);
 extern void smp_generic_take_timebase(void);
@@ -88,5 +115,5 @@ extern struct smp_ops_t *smp_ops;
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* !(_PPC64_SMP_H) */
 #endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SMP_H) */