[POWERPC] Remove set_cfg_type for PCI indirect users that don't need it

The Freescale and Marvell PCI controllers dont require explicit setting for
type 1 config cycles.  They handle producing them by implicitly looking at the
bus, devfn.

The TSI108 and 52xx don't use the generic PCI indirect code and thus don't
bother with set_cfg_type.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/platforms/52xx/mpc52xx_pci.c

@@ -390,7 +390,6 @@ mpc52xx_add_bridge(struct device_node *node)
 		return -ENOMEM;
 
 	hose->arch_data = node;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;

arch/powerpc/platforms/82xx/mpc82xx_ads.c

@@ -548,14 +548,11 @@ static void __init mpc82xx_add_bridge(struct device_node *np)
 		return;
 
 	hose->arch_data = np;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 	hose->bus_offset = 0;
 
-	hose->set_cfg_type = 1;
-
 	setup_indirect_pci(hose,
 			   r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
 			   r.start + offsetof(pci_cpm2_t, pci_cfg_data));

arch/powerpc/platforms/83xx/pci.c

@@ -70,7 +70,6 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 	if (!hose)
 		return -ENOMEM;
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;

arch/powerpc/platforms/85xx/pci.c

@@ -61,7 +61,6 @@ int __init mpc85xx_add_bridge(struct device_node *dev)
 	if (!hose)
 		return -ENOMEM;
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;

arch/powerpc/platforms/86xx/pci.c

@@ -172,7 +172,6 @@ int __init mpc86xx_add_bridge(struct device_node *dev)
 	if (!hose)
 		return -ENOMEM;
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	/* last_busno = 0xfe cause by MPC8641 PCIE bug */
 	hose->first_busno = bus_range ? bus_range[0] : 0x0;

arch/powerpc/sysdev/mv64x60_pci.c

@@ -142,7 +142,6 @@ static int __init mv64x60_add_bridge(struct device_node *dev)
 		return -ENOMEM;
 
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;

arch/powerpc/sysdev/tsi108_pci.c

@@ -226,7 +226,6 @@ int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
 		return -ENOMEM;
 	}
 	hose->arch_data = dev;
-	hose->set_cfg_type = 1;
 
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;