ARM: S3C24XX: Move mach-s3c2440/ cpufreq driver into mach-s3c24xx/

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s3c2440/Kconfig

@@ -2,14 +2,6 @@
 #
 # Licensed under GPLv2
 
-config S3C2440_CPUFREQ
-	bool "S3C2440/S3C2442 CPU Frequency scaling support"
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	default y
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
 config S3C2440_XTAL_12000000
 	bool
 	help

arch/arm/mach-s3c2440/Makefile

@@ -9,7 +9,5 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
-
 obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o

arch/arm/mach-s3c24xx/Kconfig

@@ -387,6 +387,14 @@ endif	# CPU_S3C2416
 
 if CPU_S3C2440
 
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	default y
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config S3C2440_DMA
 	bool
 	help

arch/arm/mach-s3c24xx/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o irq-s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 
 obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o irq-s3c2443.o clock-s3c2443.o

arch/arm/mach-s3c2440/s3c2440-cpufreq.c → arch/arm/mach-s3c24xx/cpufreq-s3c2440.c

@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
- *
+/*
  * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -310,5 +309,4 @@ static int s3c2442_cpufreq_init(void)
 {
 	return subsys_interface_register(&s3c2442_cpufreq_interface);
 }
-
 subsys_initcall(s3c2442_cpufreq_init);