ssb: remove rev from boardinfo

Previously the rev contained the revision read from the pci config
space and was used as board_rev in the wireless drivers. This is wrong
the board_rev is only fetched from the sprom accordingly to the open
source part of the Broadcom SDK and brcmsmac. This patch removes the
rev from the boardinfo structure and uses the board_rev attribute from
sprom instead. This attribute is filled by PCI, PCMCIA, SDIO and SoC
code.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

arch/mips/bcm47xx/setup.c

@@ -115,8 +115,6 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 		iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
 	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
-		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
 
 	bcm47xx_fill_sprom(&iv->sprom, NULL);
 

drivers/net/wireless/b43/bus.c

@@ -210,7 +210,7 @@ struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev)
 
 	dev->board_vendor = sdev->bus->boardinfo.vendor;
 	dev->board_type = sdev->bus->boardinfo.type;
-	dev->board_rev = sdev->bus->boardinfo.rev;
+	dev->board_rev = sdev->bus->sprom.board_rev;
 
 	dev->chip_id = sdev->bus->chip_id;
 	dev->chip_rev = sdev->bus->chip_rev;

drivers/net/wireless/b43/main.c

@@ -5243,10 +5243,10 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
 
 	/* boardflags workarounds */
 	if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
-	    bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
+	    bus->chip_id == 0x4301 && bus->sprom.board_rev == 0x74)
 		bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
 	if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
-	    bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
+	    bus->boardinfo.type == 0x4E && bus->sprom.board_rev > 0x40)
 		bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		pdev = bus->host_pci;

drivers/net/wireless/b43legacy/main.c

@@ -3779,7 +3779,7 @@ static void b43legacy_sprom_fixup(struct ssb_bus *bus)
 	/* boardflags workarounds */
 	if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
 	    bus->boardinfo.type == 0x4E &&
-	    bus->boardinfo.rev > 0x40)
+	    bus->sprom.board_rev > 0x40)
 		bus->sprom.boardflags_lo |= B43legacy_BFL_PACTRL;
 }
 

drivers/net/wireless/b43legacy/phy.c

@@ -408,7 +408,7 @@ static void b43legacy_phy_setupg(struct b43legacy_wldev *dev)
 
 		if (is_bcm_board_vendor(dev) &&
 		    (dev->dev->bus->boardinfo.type == 0x0416) &&
-		    (dev->dev->bus->boardinfo.rev == 0x0017))
+		    (dev->dev->bus->sprom.board_rev == 0x0017))
 			return;
 
 		b43legacy_ilt_write(dev, 0x5001, 0x0002);
@@ -424,7 +424,7 @@ static void b43legacy_phy_setupg(struct b43legacy_wldev *dev)
 
 		if (is_bcm_board_vendor(dev) &&
 		    (dev->dev->bus->boardinfo.type == 0x0416) &&
-		    (dev->dev->bus->boardinfo.rev == 0x0017))
+		    (dev->dev->bus->sprom.board_rev == 0x0017))
 			return;
 
 		b43legacy_ilt_write(dev, 0x0401, 0x0002);

drivers/net/wireless/b43legacy/radio.c

@@ -1998,7 +1998,7 @@ u16 b43legacy_default_radio_attenuation(struct b43legacy_wldev *dev)
 			if (phy->type == B43legacy_PHYTYPE_G) {
 				if (is_bcm_board_vendor(dev) &&
 				    dev->dev->bus->boardinfo.type == 0x421 &&
-				    dev->dev->bus->boardinfo.rev >= 30)
+				    dev->dev->bus->sprom.board_rev >= 30)
 					att = 3;
 				else if (is_bcm_board_vendor(dev) &&
 					 dev->dev->bus->boardinfo.type == 0x416)
@@ -2008,7 +2008,7 @@ u16 b43legacy_default_radio_attenuation(struct b43legacy_wldev *dev)
 			} else {
 				if (is_bcm_board_vendor(dev) &&
 				    dev->dev->bus->boardinfo.type == 0x421 &&
-				    dev->dev->bus->boardinfo.rev >= 30)
+				    dev->dev->bus->sprom.board_rev >= 30)
 					att = 7;
 				else
 					att = 6;
@@ -2018,7 +2018,7 @@ u16 b43legacy_default_radio_attenuation(struct b43legacy_wldev *dev)
 			if (phy->type == B43legacy_PHYTYPE_G) {
 				if (is_bcm_board_vendor(dev) &&
 				    dev->dev->bus->boardinfo.type == 0x421 &&
-				    dev->dev->bus->boardinfo.rev >= 30)
+				    dev->dev->bus->sprom.board_rev >= 30)
 					att = 3;
 				else if (is_bcm_board_vendor(dev) &&
 					 dev->dev->bus->boardinfo.type ==
@@ -2052,9 +2052,9 @@ u16 b43legacy_default_radio_attenuation(struct b43legacy_wldev *dev)
 	}
 	if (is_bcm_board_vendor(dev) &&
 	    dev->dev->bus->boardinfo.type == 0x421) {
-		if (dev->dev->bus->boardinfo.rev < 0x43)
+		if (dev->dev->bus->sprom.board_rev < 0x43)
 			att = 2;
-		else if (dev->dev->bus->boardinfo.rev < 0x51)
+		else if (dev->dev->bus->sprom.board_rev < 0x51)
 			att = 3;
 	}
 	if (att == 0xFFFF)

drivers/ssb/pci.c

@@ -784,7 +784,6 @@ static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
 {
 	bi->vendor = bus->host_pci->subsystem_vendor;
 	bi->type = bus->host_pci->subsystem_device;
-	bi->rev = bus->host_pci->revision;
 }
 
 int ssb_pci_get_invariants(struct ssb_bus *bus,

include/linux/ssb/ssb.h

@@ -188,7 +188,6 @@ struct ssb_sprom {
 struct ssb_boardinfo {
 	u16 vendor;
 	u16 type;
-	u8  rev;
 };