|
@@ -0,0 +1,421 @@
|
|
|
|
+/******************************************************************************
|
|
|
|
+ *
|
|
|
|
+ * Copyright(c) 2009-2010 Realtek Corporation.
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
|
|
+ * under the terms of version 2 of the GNU General Public License as
|
|
|
|
+ * published by the Free Software Foundation.
|
|
|
|
+ *
|
|
|
|
+ * This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
|
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
|
|
+ * more details.
|
|
|
|
+ *
|
|
|
|
+ * You should have received a copy of the GNU General Public License along with
|
|
|
|
+ * this program; if not, write to the Free Software Foundation, Inc.,
|
|
|
|
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
|
|
+ *
|
|
|
|
+ * The full GNU General Public License is included in this distribution in the
|
|
|
|
+ * file called LICENSE.
|
|
|
|
+ *
|
|
|
|
+ * Contact Information:
|
|
|
|
+ * wlanfae <wlanfae@realtek.com>
|
|
|
|
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
|
|
|
|
+ * Hsinchu 300, Taiwan.
|
|
|
|
+ *
|
|
|
|
+ * Larry Finger <Larry.Finger@lwfinger.net>
|
|
|
|
+ *
|
|
|
|
+ *****************************************************************************/
|
|
|
|
+
|
|
|
|
+#include <linux/vmalloc.h>
|
|
|
|
+
|
|
|
|
+#include "../wifi.h"
|
|
|
|
+#include "../core.h"
|
|
|
|
+#include "../pci.h"
|
|
|
|
+#include "reg.h"
|
|
|
|
+#include "def.h"
|
|
|
|
+#include "phy.h"
|
|
|
|
+#include "dm.h"
|
|
|
|
+#include "fw.h"
|
|
|
|
+#include "hw.h"
|
|
|
|
+#include "sw.h"
|
|
|
|
+#include "trx.h"
|
|
|
|
+#include "led.h"
|
|
|
|
+
|
|
|
|
+static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
|
|
|
|
+{
|
|
|
|
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
|
|
|
|
+
|
|
|
|
+ /*close ASPM for AMD defaultly */
|
|
|
|
+ rtlpci->const_amdpci_aspm = 0;
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * ASPM PS mode.
|
|
|
|
+ * 0 - Disable ASPM,
|
|
|
|
+ * 1 - Enable ASPM without Clock Req,
|
|
|
|
+ * 2 - Enable ASPM with Clock Req,
|
|
|
|
+ * 3 - Alwyas Enable ASPM with Clock Req,
|
|
|
|
+ * 4 - Always Enable ASPM without Clock Req.
|
|
|
|
+ * set defult to RTL8192CE:3 RTL8192E:2
|
|
|
|
+ * */
|
|
|
|
+ rtlpci->const_pci_aspm = 2;
|
|
|
|
+
|
|
|
|
+ /*Setting for PCI-E device */
|
|
|
|
+ rtlpci->const_devicepci_aspm_setting = 0x03;
|
|
|
|
+
|
|
|
|
+ /*Setting for PCI-E bridge */
|
|
|
|
+ rtlpci->const_hostpci_aspm_setting = 0x02;
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * In Hw/Sw Radio Off situation.
|
|
|
|
+ * 0 - Default,
|
|
|
|
+ * 1 - From ASPM setting without low Mac Pwr,
|
|
|
|
+ * 2 - From ASPM setting with low Mac Pwr,
|
|
|
|
+ * 3 - Bus D3
|
|
|
|
+ * set default to RTL8192CE:0 RTL8192SE:2
|
|
|
|
+ */
|
|
|
|
+ rtlpci->const_hwsw_rfoff_d3 = 2;
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * This setting works for those device with
|
|
|
|
+ * backdoor ASPM setting such as EPHY setting.
|
|
|
|
+ * 0 - Not support ASPM,
|
|
|
|
+ * 1 - Support ASPM,
|
|
|
|
+ * 2 - According to chipset.
|
|
|
|
+ */
|
|
|
|
+ rtlpci->const_support_pciaspm = 2;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
|
|
|
|
+{
|
|
|
|
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
|
|
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
|
|
|
|
+ const struct firmware *firmware;
|
|
|
|
+ struct rt_firmware *pfirmware = NULL;
|
|
|
|
+ int err = 0;
|
|
|
|
+ u16 earlyrxthreshold = 7;
|
|
|
|
+
|
|
|
|
+ rtlpriv->dm.dm_initialgain_enable = 1;
|
|
|
|
+ rtlpriv->dm.dm_flag = 0;
|
|
|
|
+ rtlpriv->dm.disable_framebursting = 0;
|
|
|
|
+ rtlpriv->dm.thermalvalue = 0;
|
|
|
|
+ rtlpriv->dm.useramask = true;
|
|
|
|
+
|
|
|
|
+ /* compatible 5G band 91se just 2.4G band & smsp */
|
|
|
|
+ rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
|
|
|
|
+ rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
|
|
|
|
+ rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
|
|
|
|
+
|
|
|
|
+ rtlpci->transmit_config = 0;
|
|
|
|
+
|
|
|
|
+ rtlpci->receive_config =
|
|
|
|
+ RCR_APPFCS |
|
|
|
|
+ RCR_APWRMGT |
|
|
|
|
+ /*RCR_ADD3 |*/
|
|
|
|
+ RCR_AMF |
|
|
|
|
+ RCR_ADF |
|
|
|
|
+ RCR_APP_MIC |
|
|
|
|
+ RCR_APP_ICV |
|
|
|
|
+ RCR_AICV |
|
|
|
|
+ /* Accept ICV error, CRC32 Error */
|
|
|
|
+ RCR_ACRC32 |
|
|
|
|
+ RCR_AB |
|
|
|
|
+ /* Accept Broadcast, Multicast */
|
|
|
|
+ RCR_AM |
|
|
|
|
+ /* Accept Physical match */
|
|
|
|
+ RCR_APM |
|
|
|
|
+ /* Accept Destination Address packets */
|
|
|
|
+ /*RCR_AAP |*/
|
|
|
|
+ RCR_APP_PHYST_STAFF |
|
|
|
|
+ /* Accept PHY status */
|
|
|
|
+ RCR_APP_PHYST_RXFF |
|
|
|
|
+ (earlyrxthreshold << RCR_FIFO_OFFSET);
|
|
|
|
+
|
|
|
|
+ rtlpci->irq_mask[0] = (u32)
|
|
|
|
+ (IMR_ROK |
|
|
|
|
+ IMR_VODOK |
|
|
|
|
+ IMR_VIDOK |
|
|
|
|
+ IMR_BEDOK |
|
|
|
|
+ IMR_BKDOK |
|
|
|
|
+ IMR_HCCADOK |
|
|
|
|
+ IMR_MGNTDOK |
|
|
|
|
+ IMR_COMDOK |
|
|
|
|
+ IMR_HIGHDOK |
|
|
|
|
+ IMR_BDOK |
|
|
|
|
+ IMR_RXCMDOK |
|
|
|
|
+ /*IMR_TIMEOUT0 |*/
|
|
|
|
+ IMR_RDU |
|
|
|
|
+ IMR_RXFOVW |
|
|
|
|
+ IMR_BCNINT
|
|
|
|
+ /*| IMR_TXFOVW*/
|
|
|
|
+ /*| IMR_TBDOK |
|
|
|
|
+ IMR_TBDER*/);
|
|
|
|
+
|
|
|
|
+ rtlpci->irq_mask[1] = (u32) 0;
|
|
|
|
+
|
|
|
|
+ rtlpci->shortretry_limit = 0x30;
|
|
|
|
+ rtlpci->longretry_limit = 0x30;
|
|
|
|
+
|
|
|
|
+ rtlpci->first_init = true;
|
|
|
|
+
|
|
|
|
+ /* for LPS & IPS */
|
|
|
|
+ rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
|
|
|
|
+ rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
|
|
|
|
+ rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
|
|
|
|
+ rtlpriv->psc.reg_fwctrl_lps = 3;
|
|
|
|
+ rtlpriv->psc.reg_max_lps_awakeintvl = 5;
|
|
|
|
+ /* for ASPM, you can close aspm through
|
|
|
|
+ * set const_support_pciaspm = 0 */
|
|
|
|
+ rtl92s_init_aspm_vars(hw);
|
|
|
|
+
|
|
|
|
+ if (rtlpriv->psc.reg_fwctrl_lps == 1)
|
|
|
|
+ rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
|
|
|
|
+ else if (rtlpriv->psc.reg_fwctrl_lps == 2)
|
|
|
|
+ rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
|
|
|
|
+ else if (rtlpriv->psc.reg_fwctrl_lps == 3)
|
|
|
|
+ rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
|
|
|
|
+
|
|
|
|
+ /* for firmware buf */
|
|
|
|
+ rtlpriv->rtlhal.pfirmware = vzalloc(sizeof(struct rt_firmware));
|
|
|
|
+ if (!rtlpriv->rtlhal.pfirmware) {
|
|
|
|
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
|
|
+ ("Can't alloc buffer for fw.\n"));
|
|
|
|
+ return 1;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ /* request fw */
|
|
|
|
+ err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
|
|
|
|
+ rtlpriv->io.dev);
|
|
|
|
+ if (err) {
|
|
|
|
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
|
|
+ ("Failed to request firmware!\n"));
|
|
|
|
+ return 1;
|
|
|
|
+ }
|
|
|
|
+ if (firmware->size > sizeof(struct rt_firmware)) {
|
|
|
|
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
|
|
+ ("Firmware is too big!\n"));
|
|
|
|
+ release_firmware(firmware);
|
|
|
|
+ return 1;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ pfirmware = (struct rt_firmware *)rtlpriv->rtlhal.pfirmware;
|
|
|
|
+ memcpy(pfirmware->sz_fw_tmpbuffer, firmware->data, firmware->size);
|
|
|
|
+ pfirmware->sz_fw_tmpbufferlen = firmware->size;
|
|
|
|
+ release_firmware(firmware);
|
|
|
|
+
|
|
|
|
+ return err;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void rtl92s_deinit_sw_vars(struct ieee80211_hw *hw)
|
|
|
|
+{
|
|
|
|
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
|
|
+
|
|
|
|
+ if (rtlpriv->rtlhal.pfirmware) {
|
|
|
|
+ vfree(rtlpriv->rtlhal.pfirmware);
|
|
|
|
+ rtlpriv->rtlhal.pfirmware = NULL;
|
|
|
|
+ }
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct rtl_hal_ops rtl8192se_hal_ops = {
|
|
|
|
+ .init_sw_vars = rtl92s_init_sw_vars,
|
|
|
|
+ .deinit_sw_vars = rtl92s_deinit_sw_vars,
|
|
|
|
+ .read_eeprom_info = rtl92se_read_eeprom_info,
|
|
|
|
+ .interrupt_recognized = rtl92se_interrupt_recognized,
|
|
|
|
+ .hw_init = rtl92se_hw_init,
|
|
|
|
+ .hw_disable = rtl92se_card_disable,
|
|
|
|
+ .hw_suspend = rtl92se_suspend,
|
|
|
|
+ .hw_resume = rtl92se_resume,
|
|
|
|
+ .enable_interrupt = rtl92se_enable_interrupt,
|
|
|
|
+ .disable_interrupt = rtl92se_disable_interrupt,
|
|
|
|
+ .set_network_type = rtl92se_set_network_type,
|
|
|
|
+ .set_chk_bssid = rtl92se_set_check_bssid,
|
|
|
|
+ .set_qos = rtl92se_set_qos,
|
|
|
|
+ .set_bcn_reg = rtl92se_set_beacon_related_registers,
|
|
|
|
+ .set_bcn_intv = rtl92se_set_beacon_interval,
|
|
|
|
+ .update_interrupt_mask = rtl92se_update_interrupt_mask,
|
|
|
|
+ .get_hw_reg = rtl92se_get_hw_reg,
|
|
|
|
+ .set_hw_reg = rtl92se_set_hw_reg,
|
|
|
|
+ .update_rate_tbl = rtl92se_update_hal_rate_tbl,
|
|
|
|
+ .fill_tx_desc = rtl92se_tx_fill_desc,
|
|
|
|
+ .fill_tx_cmddesc = rtl92se_tx_fill_cmddesc,
|
|
|
|
+ .query_rx_desc = rtl92se_rx_query_desc,
|
|
|
|
+ .set_channel_access = rtl92se_update_channel_access_setting,
|
|
|
|
+ .radio_onoff_checking = rtl92se_gpio_radio_on_off_checking,
|
|
|
|
+ .set_bw_mode = rtl92s_phy_set_bw_mode,
|
|
|
|
+ .switch_channel = rtl92s_phy_sw_chnl,
|
|
|
|
+ .dm_watchdog = rtl92s_dm_watchdog,
|
|
|
|
+ .scan_operation_backup = rtl92s_phy_scan_operation_backup,
|
|
|
|
+ .set_rf_power_state = rtl92s_phy_set_rf_power_state,
|
|
|
|
+ .led_control = rtl92se_led_control,
|
|
|
|
+ .set_desc = rtl92se_set_desc,
|
|
|
|
+ .get_desc = rtl92se_get_desc,
|
|
|
|
+ .tx_polling = rtl92se_tx_polling,
|
|
|
|
+ .enable_hw_sec = rtl92se_enable_hw_security_config,
|
|
|
|
+ .set_key = rtl92se_set_key,
|
|
|
|
+ .init_sw_leds = rtl92se_init_sw_leds,
|
|
|
|
+ .get_bbreg = rtl92s_phy_query_bb_reg,
|
|
|
|
+ .set_bbreg = rtl92s_phy_set_bb_reg,
|
|
|
|
+ .get_rfreg = rtl92s_phy_query_rf_reg,
|
|
|
|
+ .set_rfreg = rtl92s_phy_set_rf_reg,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static struct rtl_mod_params rtl92se_mod_params = {
|
|
|
|
+ .sw_crypto = false,
|
|
|
|
+ .inactiveps = true,
|
|
|
|
+ .swctrl_lps = true,
|
|
|
|
+ .fwctrl_lps = false,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+/* Because memory R/W bursting will cause system hang/crash
|
|
|
|
+ * for 92se, so we don't read back after every write action */
|
|
|
|
+static struct rtl_hal_cfg rtl92se_hal_cfg = {
|
|
|
|
+ .bar_id = 1,
|
|
|
|
+ .write_readback = false,
|
|
|
|
+ .name = "rtl92s_pci",
|
|
|
|
+ .fw_name = "rtlwifi/rtl8192sefw.bin",
|
|
|
|
+ .ops = &rtl8192se_hal_ops,
|
|
|
|
+ .mod_params = &rtl92se_mod_params,
|
|
|
|
+
|
|
|
|
+ .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
|
|
|
|
+ .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
|
|
|
|
+ .maps[SYS_CLK] = SYS_CLKR,
|
|
|
|
+ .maps[MAC_RCR_AM] = RCR_AM,
|
|
|
|
+ .maps[MAC_RCR_AB] = RCR_AB,
|
|
|
|
+ .maps[MAC_RCR_ACRC32] = RCR_ACRC32,
|
|
|
|
+ .maps[MAC_RCR_ACF] = RCR_ACF,
|
|
|
|
+ .maps[MAC_RCR_AAP] = RCR_AAP,
|
|
|
|
+
|
|
|
|
+ .maps[EFUSE_TEST] = REG_EFUSE_TEST,
|
|
|
|
+ .maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
|
|
|
|
+ .maps[EFUSE_CLK] = REG_EFUSE_CLK,
|
|
|
|
+ .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
|
|
|
|
+ .maps[EFUSE_PWC_EV12V] = 0, /* nouse for 8192se */
|
|
|
|
+ .maps[EFUSE_FEN_ELDR] = 0, /* nouse for 8192se */
|
|
|
|
+ .maps[EFUSE_LOADER_CLK_EN] = 0,/* nouse for 8192se */
|
|
|
|
+ .maps[EFUSE_ANA8M] = EFUSE_ANA8M,
|
|
|
|
+ .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE_92S,
|
|
|
|
+ .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
|
|
|
|
+ .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
|
|
|
|
+
|
|
|
|
+ .maps[RWCAM] = REG_RWCAM,
|
|
|
|
+ .maps[WCAMI] = REG_WCAMI,
|
|
|
|
+ .maps[RCAMO] = REG_RCAMO,
|
|
|
|
+ .maps[CAMDBG] = REG_CAMDBG,
|
|
|
|
+ .maps[SECR] = REG_SECR,
|
|
|
|
+ .maps[SEC_CAM_NONE] = CAM_NONE,
|
|
|
|
+ .maps[SEC_CAM_WEP40] = CAM_WEP40,
|
|
|
|
+ .maps[SEC_CAM_TKIP] = CAM_TKIP,
|
|
|
|
+ .maps[SEC_CAM_AES] = CAM_AES,
|
|
|
|
+ .maps[SEC_CAM_WEP104] = CAM_WEP104,
|
|
|
|
+
|
|
|
|
+ .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
|
|
|
|
+ .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
|
|
|
|
+ .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
|
|
|
|
+ .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
|
|
|
|
+ .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
|
|
|
|
+ .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
|
|
|
|
+ .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
|
|
|
|
+ .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
|
|
|
|
+ .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
|
|
|
|
+ .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
|
|
|
|
+ .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
|
|
|
|
+ .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
|
|
|
|
+ .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
|
|
|
|
+ .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
|
|
|
|
+ .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
|
|
|
|
+ .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
|
|
|
|
+
|
|
|
|
+ .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
|
|
|
|
+ .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
|
|
|
|
+ .maps[RTL_IMR_BcnInt] = IMR_BCNINT,
|
|
|
|
+ .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
|
|
|
|
+ .maps[RTL_IMR_RDU] = IMR_RDU,
|
|
|
|
+ .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
|
|
|
|
+ .maps[RTL_IMR_BDOK] = IMR_BDOK,
|
|
|
|
+ .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
|
|
|
|
+ .maps[RTL_IMR_TBDER] = IMR_TBDER,
|
|
|
|
+ .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
|
|
|
|
+ .maps[RTL_IMR_COMDOK] = IMR_COMDOK,
|
|
|
|
+ .maps[RTL_IMR_TBDOK] = IMR_TBDOK,
|
|
|
|
+ .maps[RTL_IMR_BKDOK] = IMR_BKDOK,
|
|
|
|
+ .maps[RTL_IMR_BEDOK] = IMR_BEDOK,
|
|
|
|
+ .maps[RTL_IMR_VIDOK] = IMR_VIDOK,
|
|
|
|
+ .maps[RTL_IMR_VODOK] = IMR_VODOK,
|
|
|
|
+ .maps[RTL_IMR_ROK] = IMR_ROK,
|
|
|
|
+ .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
|
|
|
|
+
|
|
|
|
+ .maps[RTL_RC_CCK_RATE1M] = DESC92S_RATE1M,
|
|
|
|
+ .maps[RTL_RC_CCK_RATE2M] = DESC92S_RATE2M,
|
|
|
|
+ .maps[RTL_RC_CCK_RATE5_5M] = DESC92S_RATE5_5M,
|
|
|
|
+ .maps[RTL_RC_CCK_RATE11M] = DESC92S_RATE11M,
|
|
|
|
+ .maps[RTL_RC_OFDM_RATE6M] = DESC92S_RATE6M,
|
|
|
|
+ .maps[RTL_RC_OFDM_RATE9M] = DESC92S_RATE9M,
|
|
|
|
+ .maps[RTL_RC_OFDM_RATE12M] = DESC92S_RATE12M,
|
|
|
|
+ .maps[RTL_RC_OFDM_RATE18M] = DESC92S_RATE18M,
|
|
|
|
+ .maps[RTL_RC_OFDM_RATE24M] = DESC92S_RATE24M,
|
|
|
|
+ .maps[RTL_RC_OFDM_RATE36M] = DESC92S_RATE36M,
|
|
|
|
+ .maps[RTL_RC_OFDM_RATE48M] = DESC92S_RATE48M,
|
|
|
|
+ .maps[RTL_RC_OFDM_RATE54M] = DESC92S_RATE54M,
|
|
|
|
+
|
|
|
|
+ .maps[RTL_RC_HT_RATEMCS7] = DESC92S_RATEMCS7,
|
|
|
|
+ .maps[RTL_RC_HT_RATEMCS15] = DESC92S_RATEMCS15,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static struct pci_device_id rtl92se_pci_ids[] __devinitdata = {
|
|
|
|
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8192, rtl92se_hal_cfg)},
|
|
|
|
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8171, rtl92se_hal_cfg)},
|
|
|
|
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8172, rtl92se_hal_cfg)},
|
|
|
|
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8173, rtl92se_hal_cfg)},
|
|
|
|
+ {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8174, rtl92se_hal_cfg)},
|
|
|
|
+ {},
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+MODULE_DEVICE_TABLE(pci, rtl92se_pci_ids);
|
|
|
|
+
|
|
|
|
+MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
|
|
|
|
+MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
|
|
|
|
+MODULE_LICENSE("GPL");
|
|
|
|
+MODULE_DESCRIPTION("Realtek 8192S/8191S 802.11n PCI wireless");
|
|
|
|
+MODULE_FIRMWARE("rtlwifi/rtl8192sefw.bin");
|
|
|
|
+
|
|
|
|
+module_param_named(swenc, rtl92se_mod_params.sw_crypto, bool, 0444);
|
|
|
|
+module_param_named(ips, rtl92se_mod_params.inactiveps, bool, 0444);
|
|
|
|
+module_param_named(swlps, rtl92se_mod_params.swctrl_lps, bool, 0444);
|
|
|
|
+module_param_named(fwlps, rtl92se_mod_params.fwctrl_lps, bool, 0444);
|
|
|
|
+MODULE_PARM_DESC(swenc, "using hardware crypto (default 0 [hardware])\n");
|
|
|
|
+MODULE_PARM_DESC(ips, "using no link power save (default 1 is open)\n");
|
|
|
|
+MODULE_PARM_DESC(swlps, "using linked sw control power save (default 1 is "
|
|
|
|
+ "open)\n");
|
|
|
|
+
|
|
|
|
+
|
|
|
|
+static struct pci_driver rtl92se_driver = {
|
|
|
|
+ .name = KBUILD_MODNAME,
|
|
|
|
+ .id_table = rtl92se_pci_ids,
|
|
|
|
+ .probe = rtl_pci_probe,
|
|
|
|
+ .remove = rtl_pci_disconnect,
|
|
|
|
+
|
|
|
|
+#ifdef CONFIG_PM
|
|
|
|
+ .suspend = rtl_pci_suspend,
|
|
|
|
+ .resume = rtl_pci_resume,
|
|
|
|
+#endif
|
|
|
|
+
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init rtl92se_module_init(void)
|
|
|
|
+{
|
|
|
|
+ int ret = 0;
|
|
|
|
+
|
|
|
|
+ ret = pci_register_driver(&rtl92se_driver);
|
|
|
|
+ if (ret)
|
|
|
|
+ RT_ASSERT(false, (": No device found\n"));
|
|
|
|
+
|
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void __exit rtl92se_module_exit(void)
|
|
|
|
+{
|
|
|
|
+ pci_unregister_driver(&rtl92se_driver);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+module_init(rtl92se_module_init);
|
|
|
|
+module_exit(rtl92se_module_exit);
|