Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (117 commits)
  [ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 ports
  [ARM] 4140/1: AACI stability add ac97 timeout and retries
  [ARM] 4139/1: AACI record support
  [ARM] 4138/1: AACI: multiple channel support for IRQ handling
  [ARM] 4211/1: Provide a defconfig for ns9xxx
  [ARM] 4210/1: base for new machine type "NetSilicon NS9360"
  [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM
  [ARM] 4221/1: S3C2443: DMA support
  [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev
  [ARM] 4219/1: S3C2443: DMA source definitions
  [ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443
  [ARM] 4217/1: S3C24XX: remove the dma channel show at startup
  [ARM] 4090/2: avoid clash between PXA and SA1111 defines
  [ARM] 4216/1: add .gitignore entries for ARM specific files
  [ARM] 4214/2: S3C2410: Add Armzone QT2410
  [ARM] 4215/1: s3c2410 usb device:  per-platform vbus_draw
  [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST
  [ARM] 4098/1: ARM: rtc_lock only used with rtc_cmos
  [ARM] 4137/1: Add kexec support
  [ARM] 4201/1: SMP barriers pair needed for the secondary boot process
  ...

Fix up conflict due to typedef removal in sound/arm/aaci.h

Documentation/arm/Samsung-S3C24XX/DMA.txt

@@ -0,0 +1,46 @@
+			S3C2410 DMA
+			===========
+
+Introduction
+------------
+
+   The kernel provides an interface to manage DMA transfers
+   using the DMA channels in the cpu, so that the central
+   duty of managing channel mappings, and programming the
+   channel generators is in one place.
+
+
+DMA Channel Ordering
+--------------------
+
+   Many of the range do not have connections for the DMA
+   channels to all sources, which means that some devices
+   have a restricted number of channels that can be used.
+
+   To allow flexibilty for each cpu type and board, the
+   dma code can be given an dma ordering structure which
+   allows the order of channel search to be specified, as
+   well as allowing the prohibition of certain claims.
+
+   struct s3c24xx_dma_order has a list of channels, and
+   each channel within has a slot for a list of dma
+   channel numbers. The slots are searched in order, for
+   the presence of a dma channel number with DMA_CH_VALID
+   orred in.
+
+   If the order has the flag DMA_CH_NEVER set, then after
+   checking the channel list, the system will return no
+   found channel, thus denying the request.
+
+   A board support file can call s3c24xx_dma_order_set()
+   to register an complete ordering set. The routine will
+   copy the data, so the original can be discared with
+   __initdata.
+
+
+Authour
+-------
+
+Ben Dooks,
+Copyright (c) 2007 Ben Dooks, Simtec Electronics
+Licensed under the GPL v2

Documentation/arm/Samsung-S3C24XX/Overview.txt

@@ -8,13 +8,10 @@ Introduction
 
   The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
   by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2440 and S3C2442 devices are supported.
+  S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
 
   Support for the S3C2400 series is in progress.
 
-  Support for the S3C2412 and S3C2413 CPUs is being merged.
-
-
 Configuration
 -------------
 
@@ -26,6 +23,22 @@ Configuration
   please check the machine specific documentation.
 
 
+Layout
+------
+
+  The core support files are located in the platform code contained in
+  arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx.
+  This directory should be kept to items shared between the platform
+  code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code.
+
+  Each cpu has a directory with the support files for it, and the
+  machines that carry the device. For example S3C2410 is contained
+  in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
+
+  Register, kernel and platform data definitions are held in the
+  include/asm-arm/arch-s3c2410 directory.
+
+
 Machines
 --------
 

arch/arm/Kconfig

@@ -245,6 +245,8 @@ config ARCH_IOP33X
 
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
+	depends on MMU
+	select PLAT_IOP
 	select PCI
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
@@ -283,6 +285,14 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_NS9XXX
+	bool "NetSilicon NS9xxx"
+	help
+	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+	  System.
+
+	  <http://www.digi.com/products/microprocessors/index.jsp>
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	help
@@ -292,6 +302,7 @@ config ARCH_PXA
 	bool "PXA2xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select GENERIC_TIME
 	help
 	  Support for Intel's PXA2XX processor line.
 
@@ -316,7 +327,7 @@ config ARCH_SA1100
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -376,7 +387,16 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
+source "arch/arm/plat-s3c24xx/Kconfig"
+
+if ARCH_S3C2410
+source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2440/Kconfig"
+source "arch/arm/mach-s3c2442/Kconfig"
+source "arch/arm/mach-s3c2443/Kconfig"
+endif
 
 source "arch/arm/mach-lh7a40x/Kconfig"
 
@@ -390,10 +410,12 @@ source "arch/arm/mach-aaec2000/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-netx/Kconfig"
 
+source "arch/arm/mach-ns9xxx/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -751,6 +773,20 @@ config XIP_PHYS_ADDR
 	  be linked for and stored to.  This address is dependent on your
 	  own flash usage.
 
+config KEXEC
+	bool "Kexec system call (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is indepedent of the system firmware.   And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.  It may help to enable device hotplugging
+	  support.
+
 endmenu
 
 if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )

arch/arm/Makefile

@@ -124,10 +124,12 @@ endif
  machine-$(CONFIG_ARCH_H720X)	   := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
  machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)       := at91rm9200
- machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
- machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
- machine-$(CONFIG_ARCH_NETX)       := netx
+ machine-$(CONFIG_ARCH_AT91)	   := at91rm9200
+ machine-$(CONFIG_ARCH_EP93XX)	   := ep93xx
+ machine-$(CONFIG_ARCH_PNX4008)	   := pnx4008
+ machine-$(CONFIG_ARCH_NETX)	   := netx
+ machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
+ textofs-$(CONFIG_ARCH_NS9XXX)	   := 0x00108000
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -149,7 +151,7 @@ MACHINE  := arch/arm/mach-$(machine-y)/
 else
 MACHINE  :=
 endif
-  
+
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
@@ -161,6 +163,11 @@ endif
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
 core-y				+= $(MACHINE)
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2400/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2412/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2440/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2442/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2443/
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
@@ -168,6 +175,7 @@ core-$(CONFIG_VFP)		+= arch/arm/vfp/
 # If we have a common platform directory, then include it in the build.
 core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
 core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
+core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/

arch/arm/boot/.gitignore

@@ -0,0 +1,2 @@
+Image
+zImage

arch/arm/boot/compressed/.gitignore

@@ -0,0 +1 @@
+piggy.gz

arch/arm/common/dmabounce.c

@@ -32,7 +32,6 @@
 
 #include <asm/cacheflush.h>
 
-#undef DEBUG
 #undef STATS
 
 #ifdef STATS
@@ -66,14 +65,13 @@ struct dmabounce_pool {
 };
 
 struct dmabounce_device_info {
-	struct list_head node;
-
 	struct device *dev;
 	struct list_head safe_buffers;
 #ifdef STATS
 	unsigned long total_allocs;
 	unsigned long map_op_count;
 	unsigned long bounce_count;
+	int attr_res;
 #endif
 	struct dmabounce_pool	small;
 	struct dmabounce_pool	large;
@@ -81,33 +79,23 @@ struct dmabounce_device_info {
 	rwlock_t lock;
 };
 
-static LIST_HEAD(dmabounce_devs);
-
 #ifdef STATS
-static void print_alloc_stats(struct dmabounce_device_info *device_info)
+static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
 {
-	printk(KERN_INFO
-		"%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n",
-		device_info->dev->bus_id,
-		device_info->small.allocs, device_info->large.allocs,
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
+	return sprintf(buf, "%lu %lu %lu %lu %lu %lu\n",
+		device_info->small.allocs,
+		device_info->large.allocs,
 		device_info->total_allocs - device_info->small.allocs -
 			device_info->large.allocs,
-		device_info->total_allocs);
+		device_info->total_allocs,
+		device_info->map_op_count,
+		device_info->bounce_count);
 }
-#endif
-
-/* find the given device in the dmabounce device list */
-static inline struct dmabounce_device_info *
-find_dmabounce_dev(struct device *dev)
-{
-	struct dmabounce_device_info *d;
 
-	list_for_each_entry(d, &dmabounce_devs, node)
-		if (d->dev == dev)
-			return d;
-
-	return NULL;
-}
+static DEVICE_ATTR(dmabounce_stats, 0400, dmabounce_show, NULL);
+#endif
 
 
 /* allocate a 'safe' buffer and keep track of it */
@@ -162,8 +150,6 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
 	if (pool)
 		pool->allocs++;
 	device_info->total_allocs++;
-	if (device_info->total_allocs % 1000 == 0)
-		print_alloc_stats(device_info);
 #endif
 
 	write_lock_irqsave(&device_info->lock, flags);
@@ -218,20 +204,11 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
 
 /* ************************************************** */
 
-#ifdef STATS
-static void print_map_stats(struct dmabounce_device_info *device_info)
-{
-	dev_info(device_info->dev,
-		"dmabounce: map_op_count=%lu, bounce_count=%lu\n",
-		device_info->map_op_count, device_info->bounce_count);
-}
-#endif
-
 static inline dma_addr_t
 map_single(struct device *dev, void *ptr, size_t size,
 		enum dma_data_direction dir)
 {
-	struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	dma_addr_t dma_addr;
 	int needs_bounce = 0;
 
@@ -281,10 +258,14 @@ map_single(struct device *dev, void *ptr, size_t size,
 		ptr = buf->safe;
 
 		dma_addr = buf->safe_dma_addr;
+	} else {
+		/*
+		 * We don't need to sync the DMA buffer since
+		 * it was allocated via the coherent allocators.
+		 */
+		consistent_sync(ptr, size, dir);
 	}
 
-	consistent_sync(ptr, size, dir);
-
 	return dma_addr;
 }
 
@@ -292,7 +273,7 @@ static inline void
 unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		enum dma_data_direction dir)
 {
-	struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	struct safe_buffer *buf = NULL;
 
 	/*
@@ -317,12 +298,12 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		DO_STATS ( device_info->bounce_count++ );
 
 		if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
-			unsigned long ptr;
+			void *ptr = buf->ptr;
 
 			dev_dbg(dev,
 				"%s: copy back safe %p to unsafe %p size %d\n",
-				__func__, buf->safe, buf->ptr, size);
-			memcpy(buf->ptr, buf->safe, size);
+				__func__, buf->safe, ptr, size);
+			memcpy(ptr, buf->safe, size);
 
 			/*
 			 * DMA buffers must have the same cache properties
@@ -332,8 +313,8 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 			 * bidirectional case because we know the cache
 			 * lines will be coherent with the data written.
 			 */
-			ptr = (unsigned long)buf->ptr;
 			dmac_clean_range(ptr, ptr + size);
+			outer_clean_range(__pa(ptr), __pa(ptr) + size);
 		}
 		free_safe_buffer(device_info, buf);
 	}
@@ -343,7 +324,7 @@ static inline void
 sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		enum dma_data_direction dir)
 {
-	struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	struct safe_buffer *buf = NULL;
 
 	if (device_info)
@@ -397,7 +378,10 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		default:
 			BUG();
 		}
-		consistent_sync(buf->safe, size, dir);
+		/*
+		 * No need to sync the safe buffer - it was allocated
+		 * via the coherent allocators.
+		 */
 	} else {
 		consistent_sync(dma_to_virt(dev, dma_addr), size, dir);
 	}
@@ -604,9 +588,10 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 	device_info->total_allocs = 0;
 	device_info->map_op_count = 0;
 	device_info->bounce_count = 0;
+	device_info->attr_res = device_create_file(dev, &dev_attr_dmabounce_stats);
 #endif
 
-	list_add(&device_info->node, &dmabounce_devs);
+	dev->archdata.dmabounce = device_info;
 
 	printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
 		dev->bus_id, dev->bus->name);
@@ -623,7 +608,9 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 void
 dmabounce_unregister_dev(struct device *dev)
 {
-	struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
+
+	dev->archdata.dmabounce = NULL;
 
 	if (!device_info) {
 		printk(KERN_WARNING
@@ -645,12 +632,10 @@ dmabounce_unregister_dev(struct device *dev)
 		dma_pool_destroy(device_info->large.pool);
 
 #ifdef STATS
-	print_alloc_stats(device_info);
-	print_map_stats(device_info);
+	if (device_info->attr_res == 0)
+		device_remove_file(dev, &dev_attr_dmabounce_stats);
 #endif
 
-	list_del(&device_info->node);
-
 	kfree(device_info);
 
 	printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",

arch/arm/common/gic.c

@@ -14,7 +14,9 @@
  *
  * o There is one CPU Interface per CPU, which sends interrupts sent
  *   by the Distributor, and interrupts generated locally, to the
- *   associated CPU.
+ *   associated CPU. The base address of the CPU interface is usually
+ *   aliased so that the same address points to different chips depending
+ *   on the CPU it is accessed from.
  *
  * Note that IRQs 0-31 are special - they are local to each CPU.
  * As such, the enable set/clear, pending set/clear and active bit
@@ -31,10 +33,38 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
-static void __iomem *gic_dist_base;
-static void __iomem *gic_cpu_base;
 static DEFINE_SPINLOCK(irq_controller_lock);
 
+struct gic_chip_data {
+	unsigned int irq_offset;
+	void __iomem *dist_base;
+	void __iomem *cpu_base;
+};
+
+#ifndef MAX_GIC_NR
+#define MAX_GIC_NR	1
+#endif
+
+static struct gic_chip_data gic_data[MAX_GIC_NR];
+
+static inline void __iomem *gic_dist_base(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return gic_data->dist_base;
+}
+
+static inline void __iomem *gic_cpu_base(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return gic_data->cpu_base;
+}
+
+static inline unsigned int gic_irq(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return irq - gic_data->irq_offset;
+}
+
 /*
  * Routines to acknowledge, disable and enable interrupts
  *
@@ -55,8 +85,8 @@ static void gic_ack_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
-	writel(irq, gic_cpu_base + GIC_CPU_EOI);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
+	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
 	spin_unlock(&irq_controller_lock);
 }
 
@@ -65,7 +95,7 @@ static void gic_mask_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
@@ -74,14 +104,14 @@ static void gic_unmask_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
 #ifdef CONFIG_SMP
 static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 {
-	void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
+	void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
 	unsigned int shift = (irq % 4) * 8;
 	unsigned int cpu = first_cpu(mask_val);
 	u32 val;
@@ -95,6 +125,37 @@ static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 }
 #endif
 
+static void fastcall gic_handle_cascade_irq(unsigned int irq,
+					    struct irq_desc *desc)
+{
+	struct gic_chip_data *chip_data = get_irq_data(irq);
+	struct irq_chip *chip = get_irq_chip(irq);
+	unsigned int cascade_irq;
+	unsigned long status;
+
+	/* primary controller ack'ing */
+	chip->ack(irq);
+
+	spin_lock(&irq_controller_lock);
+	status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
+	spin_unlock(&irq_controller_lock);
+
+	cascade_irq = (status & 0x3ff);
+	if (cascade_irq > 1020)
+		goto out;
+	if (cascade_irq < 32 || cascade_irq >= NR_IRQS) {
+		do_bad_IRQ(cascade_irq, desc);
+		goto out;
+	}
+
+	cascade_irq += chip_data->irq_offset;
+	generic_handle_irq(cascade_irq);
+
+ out:
+	/* primary controller unmasking */
+	chip->unmask(irq);
+}
+
 static struct irq_chip gic_chip = {
 	.name		= "GIC",
 	.ack		= gic_ack_irq,
@@ -105,15 +166,29 @@ static struct irq_chip gic_chip = {
 #endif
 };
 
-void __init gic_dist_init(void __iomem *base)
+void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
+{
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+	if (set_irq_data(irq, &gic_data[gic_nr]) != 0)
+		BUG();
+	set_irq_chained_handler(irq, gic_handle_cascade_irq);
+}
+
+void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
+			  unsigned int irq_start)
 {
 	unsigned int max_irq, i;
 	u32 cpumask = 1 << smp_processor_id();
 
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
 	cpumask |= cpumask << 8;
 	cpumask |= cpumask << 16;
 
-	gic_dist_base = base;
+	gic_data[gic_nr].dist_base = base;
+	gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31;
 
 	writel(0, base + GIC_DIST_CTRL);
 
@@ -158,8 +233,9 @@ void __init gic_dist_init(void __iomem *base)
 	/*
 	 * Setup the Linux IRQ subsystem.
 	 */
-	for (i = 29; i < max_irq; i++) {
+	for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
 		set_irq_chip(i, &gic_chip);
+		set_irq_chip_data(i, &gic_data[gic_nr]);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
@@ -167,9 +243,13 @@ void __init gic_dist_init(void __iomem *base)
 	writel(1, base + GIC_DIST_CTRL);
 }
 
-void __cpuinit gic_cpu_init(void __iomem *base)
+void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 {
-	gic_cpu_base = base;
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
+	gic_data[gic_nr].cpu_base = base;
+
 	writel(0xf0, base + GIC_CPU_PRIMASK);
 	writel(1, base + GIC_CPU_CTRL);
 }
@@ -179,6 +259,7 @@ void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
 {
 	unsigned long map = *cpus_addr(cpumask);
 
-	writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT);
+	/* this always happens on GIC0 */
+	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif

arch/arm/configs/at91sam9263ek_defconfig

@@ -0,0 +1,1184 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc1
+# Mon Jan  8 16:06:54 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+
+#
+# AT91SAM9263 Board Type
+#
+CONFIG_MACH_AT91SAM9263EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

arch/arm/configs/ateb9200_defconfig

@@ -1066,7 +1066,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #

arch/arm/configs/csb337_defconfig

@@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB337=y
 
 #
 # Self-contained MTD device drivers
@@ -986,7 +988,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 # CONFIG_RTC_DRV_V3020 is not set
 

arch/arm/configs/csb637_defconfig

@@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB637=y
 
 #
 # Self-contained MTD device drivers

arch/arm/configs/kafa_defconfig

@@ -718,7 +718,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #

arch/arm/configs/ns9xxx_defconfig

@@ -0,0 +1,621 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Thu Feb 15 20:51:47 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_UTS_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_NS9XXX=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# NS9xxx Implementations
+#
+CONFIG_MACH_CC9P9360DEV=y
+CONFIG_PROCESSOR_NS9360=y
+CONFIG_BOARD_A9M9750DEV=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_ICEDCC=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

arch/arm/configs/s3c2410_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc4
-# Fri Nov  3 17:41:31 2006
+# Linux kernel version: 2.6.20
+# Thu Feb 15 11:26:24 2007
 #
 CONFIG_ARM=y
 # CONFIG_GENERIC_TIME is not set
@@ -11,6 +11,8 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -37,13 +39,14 @@ CONFIG_SYSVIPC=y
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -76,7 +79,9 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -110,6 +115,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -122,54 +128,73 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C24XX=y
+CONFIG_CPU_S3C244X=y
+CONFIG_PM_SIMTEC=y
+# CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_MACH_SMDK=y
 
 #
-# S3C24XX Implementations
+# S3C2400 Machines
 #
-# CONFIG_MACH_AML_M5900 is not set
-CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_OSIRIS=y
-CONFIG_ARCH_BAST=y
-CONFIG_BAST_PC104_IRQ=y
+CONFIG_CPU_S3C2410=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_S3C2410_PM=y
+CONFIG_S3C2410_GPIO=y
+CONFIG_S3C2410_CLOCK=y
+
+#
+# S3C2410 Machines
+#
+CONFIG_ARCH_SMDK2410=y
 CONFIG_ARCH_H1940=y
+CONFIG_PM_H1940=y
 CONFIG_MACH_N30=y
-CONFIG_MACH_SMDK=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_SMDK2440_CPU2440=y
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_MACH_S3C2413=y
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_VR1000=y
-CONFIG_MACH_RX3715=y
+CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_VSTMS=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C2410_PM=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2412_PM=y
+CONFIG_MACH_AML_M5900=y
+CONFIG_BAST_PC104_IRQ=y
+CONFIG_MACH_VR1000=y
 CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C244X=y
+CONFIG_S3C2412_DMA=y
+CONFIG_S3C2412_PM=y
+
+#
+# S3C2412 Machines
+#
+CONFIG_MACH_SMDK2413=y
+CONFIG_MACH_S3C2413=y
+CONFIG_MACH_VSTMS=y
 CONFIG_CPU_S3C2440=y
+CONFIG_S3C2440_DMA=y
+
+#
+# S3C2440 Machines
+#
+CONFIG_MACH_ANUBIS=y
+CONFIG_MACH_OSIRIS=y
+CONFIG_MACH_RX3715=y
+CONFIG_ARCH_S3C2440=y
+CONFIG_MACH_NEXCODER_2440=y
+CONFIG_SMDK2440_CPU2440=y
 CONFIG_CPU_S3C2442=y
 
 #
-# S3C2410 Boot
+# S3C2442 Machines
 #
-# CONFIG_S3C2410_BOOT_WATCHDOG is not set
-# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+CONFIG_SMDK2440_CPU2442=y
+CONFIG_CPU_S3C2443=y
 
 #
-# S3C2410 Setup
+# S3C2443 Machines
 #
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_MACH_SMDK2443=y
 
 #
 # Processor Type
@@ -196,6 +221,7 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
@@ -303,6 +329,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -385,6 +412,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -530,6 +558,11 @@ CONFIG_BLK_DEV_IDE_BAST=y
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_NETLINK is not set
 
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
 #
 # Multi-device support (RAID and LVM)
 #
@@ -682,7 +715,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
@@ -700,13 +733,14 @@ CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
 # CONFIG_SERIAL_8250_FOURPORT is not set
 # CONFIG_SERIAL_8250_ACCENT is not set
 # CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
 # CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -755,10 +789,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -863,6 +893,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -870,6 +901,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -951,6 +983,11 @@ CONFIG_FONT_8x16=y
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+
 #
 # USB support
 #
@@ -1028,6 +1065,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1179,9 +1217,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1191,7 +1226,7 @@ CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -1284,6 +1319,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1296,6 +1336,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1311,12 +1353,10 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
@@ -1339,6 +1379,7 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1346,3 +1387,4 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

arch/arm/kernel/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o

arch/arm/kernel/calls.S

@@ -356,6 +356,7 @@
 		CALL(sys_move_pages)
 /* 345 */	CALL(sys_getcpu)
 		CALL(sys_ni_syscall)		/* eventually epoll_pwait */
+		CALL(sys_kexec_load)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/crunch.c

@@ -75,6 +75,7 @@ static struct notifier_block crunch_notifier_block = {
 static int __init crunch_init(void)
 {
 	thread_register_notifier(&crunch_notifier_block);
+	elf_hwcap |= HWCAP_CRUNCH;
 
 	return 0;
 }

arch/arm/kernel/ecard.c

@@ -1009,7 +1009,7 @@ ecard_probe(int slot, card_type_t type)
 		ec->fiqmask = 4;
 	}
 
-	for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++)
+	for (i = 0; i < ARRAY_SIZE(blacklist); i++)
 		if (blacklist[i].manufacturer == ec->cid.manufacturer &&
 		    blacklist[i].product == ec->cid.product) {
 			ec->card_desc = blacklist[i].type;

arch/arm/kernel/entry-armv.S

@@ -99,7 +99,6 @@ common_invalid:
 					@ cpsr_<exception>, "old_r0"
 
 	mov	r0, sp
-	and	r2, r6, #0x1f
 	b	bad_mode
 
 /*

arch/arm/kernel/machine_kexec.c

@@ -0,0 +1,78 @@
+/*
+ * machine_kexec.c - handle transition of Linux booting another kernel
+ */
+
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
+
+const extern unsigned char relocate_new_kernel[];
+const extern unsigned int relocate_new_kernel_size;
+
+extern void setup_mm_for_reboot(char mode);
+
+extern unsigned long kexec_start_address;
+extern unsigned long kexec_indirection_page;
+extern unsigned long kexec_mach_type;
+
+/*
+ * Provide a dummy crash_notes definition while crash dump arrives to arm.
+ * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
+ */
+
+int machine_kexec_prepare(struct kimage *image)
+{
+	return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+}
+
+void machine_shutdown(void)
+{
+}
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+}
+
+void machine_kexec(struct kimage *image)
+{
+	unsigned long page_list;
+	unsigned long reboot_code_buffer_phys;
+	void *reboot_code_buffer;
+
+
+	page_list = image->head & PAGE_MASK;
+
+	/* we need both effective and real address here */
+	reboot_code_buffer_phys =
+	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
+	reboot_code_buffer = page_address(image->control_code_page);
+
+	/* Prepare parameters for reboot_code_buffer*/
+	kexec_start_address = image->start;
+	kexec_indirection_page = page_list;
+	kexec_mach_type = machine_arch_type;
+
+	/* copy our kernel relocation code to the control code page */
+	memcpy(reboot_code_buffer,
+	       relocate_new_kernel, relocate_new_kernel_size);
+
+
+	flush_icache_range((unsigned long) reboot_code_buffer,
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+	printk(KERN_INFO "Bye!\n");
+
+	cpu_proc_fin();
+	setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
+	cpu_reset(reboot_code_buffer_phys);
+}

arch/arm/kernel/process.c

@@ -36,7 +36,13 @@
 #include <asm/uaccess.h>
 #include <asm/mach/time.h>
 
-extern const char *processor_modes[];
+static const char *processor_modes[] = {
+  "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
+  "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+  "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
+  "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
+};
+
 extern void setup_mm_for_reboot(char mode);
 
 static volatile int hlt_counter;

arch/arm/kernel/relocate_kernel.S

@@ -0,0 +1,74 @@
+/*
+ * relocate_kernel.S - put the kernel image in place to boot
+ */
+
+#include <asm/kexec.h>
+
+	.globl relocate_new_kernel
+relocate_new_kernel:
+
+	ldr	r0,kexec_indirection_page
+	ldr	r1,kexec_start_address
+
+
+0:	/* top, read another word for the indirection page */
+	ldr	r3, [r0],#4
+
+	/* Is it a destination page. Put destination address to r4 */
+	tst	r3,#1,0
+	beq	1f
+	bic	r4,r3,#1
+	b	0b
+1:
+	/* Is it an indirection page */
+	tst	r3,#2,0
+	beq	1f
+	bic	r0,r3,#2
+	b	0b
+1:
+
+	/* are we done ? */
+	tst	r3,#4,0
+	beq	1f
+	b	2f
+
+1:
+	/* is it source ? */
+	tst	r3,#8,0
+	beq	0b
+	bic r3,r3,#8
+	mov r6,#1024
+9:
+	ldr r5,[r3],#4
+	str r5,[r4],#4
+	subs r6,r6,#1
+	bne 9b
+	b 0b
+
+2:
+	/* Jump to relocated kernel */
+	mov lr,r1
+	mov r0,#0
+	ldr r1,kexec_mach_type
+	mov r2,#0
+	mov pc,lr
+
+	.globl kexec_start_address
+kexec_start_address:
+	.long	0x0
+
+	.globl kexec_indirection_page
+kexec_indirection_page:
+	.long	0x0
+
+	.globl kexec_mach_type
+kexec_mach_type:
+	.long	0x0
+
+relocate_new_kernel_end:
+
+	.globl relocate_new_kernel_size
+relocate_new_kernel_size:
+	.long relocate_new_kernel_end - relocate_new_kernel
+
+

arch/arm/kernel/setup.c

@@ -88,6 +88,9 @@ struct cpu_user_fns cpu_user;
 #ifdef MULTI_CACHE
 struct cpu_cache_fns cpu_cache;
 #endif
+#ifdef CONFIG_OUTER_CACHE
+struct outer_cache_fns outer_cache;
+#endif
 
 struct stack {
 	u32 irq[3];

arch/arm/kernel/time.c

@@ -40,12 +40,14 @@
  */
 struct sys_timer *system_timer;
 
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
 /* this needs a better home */
 DEFINE_SPINLOCK(rtc_lock);
 
-#ifdef CONFIG_SA1100_RTC_MODULE
+#ifdef CONFIG_RTC_DRV_CMOS_MODULE
 EXPORT_SYMBOL(rtc_lock);
 #endif
+#endif	/* pc-style 'CMOS' RTC support */
 
 /* change this if you have some constant time drift */
 #define USECS_PER_JIFFY	(1000000/HZ)

arch/arm/kernel/traps.c

@@ -32,13 +32,6 @@
 #include "ptrace.h"
 #include "signal.h"
 
-const char *processor_modes[]=
-{ "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
-  "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
-  "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
-  "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
-};
-
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
 
 #ifdef CONFIG_DEBUG_USER
@@ -289,7 +282,10 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
 	regs->ARM_pc -= correction;
 
 	pc = (void __user *)instruction_pointer(regs);
-	if (thumb_mode(regs)) {
+
+	if (processor_mode(regs) == SVC_MODE) {
+		instr = *(u32 *) pc;
+	} else if (thumb_mode(regs)) {
 		get_user(instr, (u16 __user *)pc);
 	} else {
 		get_user(instr, (u32 __user *)pc);
@@ -337,12 +333,11 @@ asmlinkage void do_unexp_fiq (struct pt_regs *regs)
  * It never returns, and never tries to sync.  We hope that we can at least
  * dump out some state information...
  */
-asmlinkage void bad_mode(struct pt_regs *regs, int reason, int proc_mode)
+asmlinkage void bad_mode(struct pt_regs *regs, int reason)
 {
 	console_verbose();
 
-	printk(KERN_CRIT "Bad mode in %s handler detected: mode %s\n",
-		handler[reason], processor_modes[proc_mode]);
+	printk(KERN_CRIT "Bad mode in %s handler detected\n", handler[reason]);
 
 	die("Oops - bad mode", regs, 0);
 	local_irq_disable();

arch/arm/mach-at91rm9200/Kconfig → arch/arm/mach-at91/Kconfig

@@ -9,11 +9,14 @@ config ARCH_AT91RM9200
 	bool "AT91RM9200"
 
 config ARCH_AT91SAM9260
-	bool "AT91SAM9260"
+	bool "AT91SAM9260 or AT91SAM9XE"
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+
 endchoice
 
 # ----------------------------------------------------------
@@ -90,13 +93,22 @@ endif
 
 if ARCH_AT91SAM9260
 
-comment "AT91SAM9260 Board Type"
+comment "AT91SAM9260 Variants"
+
+config ARCH_AT91SAM9260_SAM9XE
+	bool "AT91SAM9XE"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
+	  They are basicaly AT91SAM9260s with various sizes of embedded Flash.
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK
-	bool "Atmel AT91SAM9260-EK Evaluation Kit"
+	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 	depends on ARCH_AT91SAM9260
 	help
-	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
 endif
@@ -118,17 +130,32 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9263
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+endif
+
+# ----------------------------------------------------------
+
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_AT91_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).

arch/arm/mach-at91rm9200/Makefile → arch/arm/mach-at91/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
@@ -31,6 +32,9 @@ obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 
+# AT91SAM9263 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
 led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o

arch/arm/mach-at91rm9200/at91rm9200.c → arch/arm/mach-at91/at91rm9200.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91rm9200.c
+ * arch/arm/mach-at91/at91rm9200.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -117,6 +117,36 @@ static struct clk pioD_clk = {
 	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -132,7 +162,12 @@ static struct clk *periph_clocks[] __initdata = {
 	&twi_clk,
 	&spi_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc5
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	&ohci_clk,
 	&ether_clk,
 	// irq0 .. irq6

arch/arm/mach-at91rm9200/at91rm9200_devices.c → arch/arm/mach-at91/at91rm9200_devices.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91rm9200_devices.c
+ * arch/arm/mach-at91/at91rm9200_devices.c
  *
  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
  *  Copyright (C) 2005 David Brownell
@@ -315,7 +315,7 @@ static struct platform_device at91rm9200_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -361,7 +361,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91rm9200_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -594,6 +594,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }

arch/arm/mach-at91rm9200/at91rm9200_time.c → arch/arm/mach-at91/at91rm9200_time.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
+ * linux/arch/arm/mach-at91/at91rm9200_time.c
  *
  *  Copyright (C) 2003 SAN People
  *  Copyright (C) 2003 ATMEL

arch/arm/mach-at91rm9200/at91sam9260.c → arch/arm/mach-at91/at91sam9260.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91sam9260.c
+ * arch/arm/mach-at91/at91sam9260.c
  *
  *  Copyright (C) 2006 SAN People
  *
@@ -14,6 +14,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
@@ -27,7 +28,11 @@ static struct map_desc at91sam9260_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	}
+};
+
+static struct map_desc at91sam9260_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
 		.length		= AT91SAM9260_SRAM0_SIZE,
@@ -37,7 +42,14 @@ static struct map_desc at91sam9260_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
 		.length		= AT91SAM9260_SRAM1_SIZE,
 		.type		= MT_DEVICE,
-	},
+	}
+};
+
+static struct map_desc at91sam9xe_sram_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
+		.type		= MT_DEVICE,
+	}
 };
 
 /* --------------------------------------------------------------------
@@ -107,13 +119,28 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk ether_clk = {
-	.name		= "ether_clk",
+static struct clk macb_clk = {
+	.name		= "macb_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -137,6 +164,21 @@ static struct clk usart5_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -152,14 +194,18 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi0_clk,
 	&spi1_clk,
 	// ssc
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
-	&ether_clk,
+	&macb_clk,
 	&isi_clk,
 	&usart3_clk,
 	&usart4_clk,
 	&usart5_clk,
-	// tc3 .. tc5
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	// irq0 .. irq2
 };
 
@@ -213,7 +259,7 @@ static struct at91_gpio_bank at91sam9260_gpio[] = {
 
 static void at91sam9260_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
@@ -221,11 +267,37 @@ static void at91sam9260_reset(void)
  *  AT91SAM9260 processor initialization
  * -------------------------------------------------------------------- */
 
+static void __init at91sam9xe_initialize(void)
+{
+	unsigned long cidr, sram_size;
+
+	cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+	switch (cidr & AT91_CIDR_SRAMSIZ) {
+		case AT91_CIDR_SRAMSIZ_32K:
+			sram_size = 2 * SZ_16K;
+			break;
+		case AT91_CIDR_SRAMSIZ_16K:
+		default:
+			sram_size = SZ_16K;
+	}
+
+	at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+	at91sam9xe_sram_desc->length = sram_size;
+
+	iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
+}
+
 void __init at91sam9260_initialize(unsigned long main_clock)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
 
+	if (cpu_is_at91sam9xe())
+		at91sam9xe_initialize();
+	else
+		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+
 	at91_arch_reset = at91sam9260_reset;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);

arch/arm/mach-at91rm9200/at91sam9260_devices.c → arch/arm/mach-at91/at91sam9260_devices.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91sam9260_devices.c
+ * arch/arm/mach-at91/at91sam9260_devices.c
  *
  *  Copyright (C) 2006 Atmel
  *
@@ -128,7 +128,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = 0xffffffffUL;
-static struct eth_platform_data eth_data;
+static struct at91_eth_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -155,7 +155,7 @@ static struct platform_device at91sam9260_eth_device = {
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct eth_platform_data *data)
+void __init at91_add_device_eth(struct at91_eth_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +192,7 @@ void __init at91_add_device_eth(struct eth_platform_data *data)
 	platform_device_register(&at91sam9260_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct eth_platform_data *data) {}
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
 #endif
 
 
@@ -229,7 +229,7 @@ static struct platform_device at91sam9260_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -275,7 +275,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91sam9260_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -515,6 +515,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }

arch/arm/mach-at91rm9200/at91sam9261.c → arch/arm/mach-at91/at91sam9261.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91sam9261.c
+ * arch/arm/mach-at91/at91sam9261.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -97,6 +97,21 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
@@ -121,7 +136,9 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi0_clk,
 	&spi1_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
 	&lcdc_clk,
 	// irq0 .. irq2
@@ -208,7 +225,7 @@ static struct at91_gpio_bank at91sam9261_gpio[] = {
 
 static void at91sam9261_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 

arch/arm/mach-at91rm9200/at91sam9261_devices.c → arch/arm/mach-at91/at91sam9261_devices.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91sam9261_devices.c
+ * arch/arm/mach-at91/at91sam9261_devices.c
  *
  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
  *  Copyright (C) 2005 David Brownell
@@ -159,7 +159,7 @@ static struct platform_device at91sam9261_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +192,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91sam9261_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -513,6 +513,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }

arch/arm/mach-at91/at91sam9263.c

@@ -0,0 +1,313 @@
+/*
+ * arch/arm/mach-at91/at91sam9263.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9263_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
+		.length		= AT91SAM9263_SRAM0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
+		.length		= AT91SAM9263_SRAM1_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCDE_clk = {
+	.name		= "pioCDE_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOCDE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioCDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc0_clk,
+	&mmc1_clk,
+	// can
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc0 .. ssc1
+	// ac97
+	&tcb_clk,
+	// pwmc
+	&macb_clk,
+	// 2dge
+	&udc_clk,
+	&isi_clk,
+	&lcdc_clk,
+	// dma
+	&ohci_clk,
+	// irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91sam9263_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9263_gpio[] = {
+	{
+		.id		= AT91SAM9263_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOC,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioCDE_clk,
+	}
+};
+
+static void at91sam9263_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+	at91_arch_reset = at91sam9263_reset;
+	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9263_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9263_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C, D and E */
+	0,
+	0,
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface 0 */
+	0,	/* Multimedia Card Interface 1 */
+	4,	/* CAN */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	6,	/* AC97 Controller */
+	0,	/* Timer Counter 0, 1 and 2 */
+	0,	/* Pulse Width Modulation Controller */
+	3,	/* Ethernet */
+	0,
+	0,	/* 2D Graphic Engine */
+	3,	/* USB Device Port */
+	0,	/* Image Sensor Interface */
+	3,	/* LDC Controller */
+	0,	/* DMA Controller */
+	0,
+	3,	/* USB Host port */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+	0,	/* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9263_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}

arch/arm/mach-at91/at91sam9263_devices.c

@@ -0,0 +1,818 @@
+/*
+ * arch/arm/mach-at91/at91sam9263_devices.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9263_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_UHP_BASE,
+		.end	= AT91SAM9263_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UHP,
+		.end	= AT91SAM9263_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_data = *data;
+	platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_UDP,
+		.end	= AT91SAM9263_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UDP,
+		.end	= AT91SAM9263_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	udc_data = *data;
+	platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_EMAC,
+		.end	= AT91SAM9263_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_EMAC,
+		.end	= AT91SAM9263_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */
+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9263_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI0,
+		.end	= AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI0,
+		.end	= AT91SAM9263_ID_MCI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc0_device = {
+	.name		= "at91_mci",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc0_data,
+	},
+	.resource	= mmc0_resources,
+	.num_resources	= ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI1,
+		.end	= AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI1,
+		.end	= AT91SAM9263_ID_MCI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc1_device = {
+	.name		= "at91_mci",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc1_data,
+	},
+	.resource	= mmc1_resources,
+	.num_resources	= ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	if (mmc_id == 0) {		/* MCI0 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA12, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA16, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA17, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA18, 1);
+				at91_set_A_periph(AT91_PIN_PA19, 1);
+				at91_set_A_periph(AT91_PIN_PA20, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA1, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA0, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA3, 1);
+				at91_set_A_periph(AT91_PIN_PA4, 1);
+				at91_set_A_periph(AT91_PIN_PA5, 1);
+			}
+		}
+
+		mmc0_data = *data;
+		at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc0_device);
+	} else {			/* MCI1 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA6, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA21, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA22, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA23, 1);
+				at91_set_A_periph(AT91_PIN_PA24, 1);
+				at91_set_A_periph(AT91_PIN_PA25, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA7, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA8, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA9, 1);
+				at91_set_A_periph(AT91_PIN_PA10, 1);
+				at91_set_A_periph(AT91_PIN_PA11, 1);
+			}
+		}
+
+		mmc1_data = *data;
+		at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc1_device);
+	}
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9263_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9263_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_TWI,
+		.end	= AT91SAM9263_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_TWI,
+		.end	= AT91SAM9263_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PB4, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+	platform_device_register(&at91sam9263_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI0,
+		.end	= AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI0,
+		.end	= AT91SAM9263_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI1,
+		.end	= AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI1,
+		.end	= AT91SAM9263_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9263_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US0,
+		.end	= AT91SAM9263_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US0,
+		.end	= AT91SAM9263_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PA28, 0);		/* RTS0 */
+	at91_set_A_periph(AT91_PIN_PA29, 0);		/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US1,
+		.end	= AT91SAM9263_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US1,
+		.end	= AT91SAM9263_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
+	at91_set_B_periph(AT91_PIN_PD7, 0);		/* RTS1 */
+	at91_set_B_periph(AT91_PIN_PD8, 0);		/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US2,
+		.end	= AT91SAM9263_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US2,
+		.end	= AT91SAM9263_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
+	at91_set_B_periph(AT91_PIN_PD5, 0);		/* RTS2 */
+	at91_set_B_periph(AT91_PIN_PD6, 0);		/* CTS2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91sam9263_uart0_device;
+				at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91sam9263_uart1_device;
+				at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91sam9263_uart2_device;
+				at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91sam9263_dbgu_device;
+				at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);

arch/arm/mach-at91rm9200/at91sam926x_time.c → arch/arm/mach-at91/at91sam926x_time.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
+ * linux/arch/arm/mach-at91/at91sam926x_time.c
  *
  * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
  * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
@@ -30,7 +30,6 @@
  * Returns number of microseconds since last timer interrupt.  Note that interrupts
  * will have been disabled by do_gettimeofday()
  *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- *  'tick' is usecs per jiffy (linux/timex.h).
  */
 static unsigned long at91sam926x_gettimeoffset(void)
 {
@@ -39,7 +38,7 @@ static unsigned long at91sam926x_gettimeoffset(void)
 
 	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
 
-	return (unsigned long)(elapsed * 1000000) / LATCH;
+	return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
 }
 
 /*

arch/arm/mach-at91rm9200/board-1arm.c → arch/arm/mach-at91/board-1arm.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-1arm.c
+ * linux/arch/arm/mach-at91/board-1arm.c
  *
  *  Copyright (C) 2005 SAN People
  *

arch/arm/mach-at91rm9200/board-carmeva.c → arch/arm/mach-at91/board-carmeva.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-carmeva.c
+ * linux/arch/arm/mach-at91/board-carmeva.c
  *
  *  Copyright (c) 2005 Peer Georgi
  *  		       Conitec Datasystems
@@ -134,7 +134,7 @@ static void __init carmeva_board_init(void)
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
-	at91_add_device_mmc(&carmeva_mmc_data);
+	at91_add_device_mmc(0, &carmeva_mmc_data);
 }
 
 MACHINE_START(CARMEVA, "Carmeva")

arch/arm/mach-at91rm9200/board-csb337.c → arch/arm/mach-at91/board-csb337.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-csb337.c
+ * linux/arch/arm/mach-at91/board-csb337.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -112,6 +113,42 @@ static struct spi_board_info csb337_spi_devices[] = {
 	},
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x800000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
 static void __init csb337_board_init(void)
 {
 	/* Serial */
@@ -130,7 +167,9 @@ static void __init csb337_board_init(void)
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(&csb337_mmc_data);
+	at91_add_device_mmc(0, &csb337_mmc_data);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
 }
 
 MACHINE_START(CSB337, "Cogent CSB337")

arch/arm/mach-at91rm9200/board-csb637.c → arch/arm/mach-at91/board-csb637.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-csb637.c
+ * linux/arch/arm/mach-at91/board-csb637.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -23,6 +23,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -81,6 +82,42 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 	.pullup_pin   = AT91_PIN_PB1,
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x1000000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
 static void __init csb637_board_init(void)
 {
 	/* Serial */
@@ -95,6 +132,8 @@ static void __init csb637_board_init(void)
 	at91_add_device_i2c();
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
 }
 
 MACHINE_START(CSB637, "Cogent CSB637")

arch/arm/mach-at91rm9200/board-dk.c → arch/arm/mach-at91/board-dk.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-dk.c
+ * linux/arch/arm/mach-at91/board-dk.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -194,7 +194,7 @@ static void __init dk_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&dk_mmc_data);
+	at91_add_device_mmc(0, &dk_mmc_data);
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);

arch/arm/mach-at91rm9200/board-eb9200.c → arch/arm/mach-at91/board-eb9200.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-eb9200.c
+ * linux/arch/arm/mach-at91/board-eb9200.c
  *
  *  Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
  *  by Andrew Patrikalakis
@@ -109,7 +109,7 @@ static void __init eb9200_board_init(void)
 	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(&eb9200_mmc_data);
+	at91_add_device_mmc(0, &eb9200_mmc_data);
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")

arch/arm/mach-at91rm9200/board-ek.c → arch/arm/mach-at91/board-ek.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-ek.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -154,7 +154,7 @@ static void __init ek_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
 	/* NOR Flash */
 	platform_device_register(&ek_flash);

arch/arm/mach-at91rm9200/board-kafa.c → arch/arm/mach-at91/board-kafa.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-kafa.c
+ * linux/arch/arm/mach-at91/board-kafa.c
  *
  *  Copyright (C) 2006 Sperry-Sun
  *

arch/arm/mach-at91rm9200/board-kb9202.c → arch/arm/mach-at91/board-kb9202.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-kb9202.c
+ * linux/arch/arm/mach-at91/board-kb9202.c
  *
  *  Copyright (c) 2005 kb_admin
  *  		       KwikByte, Inc.
@@ -122,7 +122,7 @@ static void __init kb9202_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&kb9202_udc_data);
 	/* MMC */
-	at91_add_device_mmc(&kb9202_mmc_data);
+	at91_add_device_mmc(0, &kb9202_mmc_data);
 	/* I2C */
 	at91_add_device_i2c();
 	/* SPI */

arch/arm/mach-at91rm9200/board-sam9260ek.c → arch/arm/mach-at91/board-sam9260ek.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9260ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -118,7 +118,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata eth_platform_data ek_macb_data = {
+static struct __initdata at91_eth_data ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 1,
 };
@@ -187,7 +187,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")

arch/arm/mach-at91rm9200/board-sam9261ek.c → arch/arm/mach-at91/board-sam9261ek.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9261ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -243,7 +243,7 @@ static void __init ek_board_init(void)
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #else
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
 }
 

arch/arm/mach-at91/board-sam9263ek.c

@@ -0,0 +1,176 @@
+/*
+ * linux/arch/arm/mach-at91/board-sam9263ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 2 = USART0 .. USART2
+ *    3      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 3, 0, -1, -1, }		/* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 16.367 MHz crystal */
+	at91sam9263_initialize(16367660);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PA25,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PE18,
+	.wp_pin		= AT91_PIN_PE19,
+//	.vcc_pin	= ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 64 * 1024 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 64 * 1024 * 1024,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PA22,
+	.enable_pin	= AT91_PIN_PD15,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(1, &ek_mmc_data);
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+}
+
+MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END

arch/arm/mach-at91rm9200/clock.c → arch/arm/mach-at91/clock.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/clock.c
+ * linux/arch/arm/mach-at91/clock.c
  *
  * Copyright (C) 2005 David Brownell
  * Copyright (C) 2005 Ivan Kokshaysky
@@ -525,27 +525,6 @@ fail:
 	return 0;
 }
 
-/*
- * Several unused clocks may be active.  Turn them off.
- */
-static void __init at91_periphclk_reset(void)
-{
-	unsigned long reg;
-	struct clk *clk;
-
-	reg = at91_sys_read(AT91_PMC_PCSR);
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->mode != pmc_periph_mode)
-			continue;
-
-		if (clk->users > 0)
-			reg &= ~clk->pmc_mask;
-	}
-
-	at91_sys_write(AT91_PMC_PCDR, reg);
-}
-
 static struct clk *const standard_pmc_clocks[] __initdata = {
 	/* four primary clocks */
 	&clk32k,
@@ -586,7 +565,7 @@ int __init at91_clock_init(unsigned long main_clock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
 	/*
-	 * USB clock init:  choose 48 MHz PLLB value, turn all clocks off,
+	 * USB clock init:  choose 48 MHz PLLB value,
 	 * disable 48MHz clock during usb peripheral suspend.
 	 *
 	 * REVISIT:  assumes MCK doesn't derive from PLLB!
@@ -596,16 +575,10 @@ int __init at91_clock_init(unsigned long main_clock)
 	if (cpu_is_at91rm9200()) {
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
-	} else if (cpu_is_at91sam9261()) {
-		uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
 	}
 	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
@@ -634,11 +607,34 @@ int __init at91_clock_init(unsigned long main_clock)
 		(unsigned) main_clock / 1000000,
 		((unsigned) main_clock % 1000000) / 1000);
 
-	/* disable all programmable clocks */
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
+	return 0;
+}
+
+/*
+ * Several unused clocks may be active.  Turn them off.
+ */
+static int __init at91_clock_reset(void)
+{
+	unsigned long pcdr = 0;
+	unsigned long scdr = 0;
+	struct clk *clk;
+
+	list_for_each_entry(clk, &clocks, node) {
+		if (clk->users > 0)
+			continue;
+
+		if (clk->mode == pmc_periph_mode)
+			pcdr |= clk->pmc_mask;
+
+		if (clk->mode == pmc_sys_mode)
+			scdr |= clk->pmc_mask;
+
+		pr_debug("Clocks: disable unused %s\n", clk->name);
+	}
 
-	/* disable all other unused peripheral clocks */
-	at91_periphclk_reset();
+	at91_sys_write(AT91_PMC_PCDR, pcdr);
+	at91_sys_write(AT91_PMC_SCDR, scdr);
 
 	return 0;
 }
+late_initcall(at91_clock_reset);

arch/arm/mach-at91rm9200/clock.h → arch/arm/mach-at91/clock.h

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/clock.h
+ * linux/arch/arm/mach-at91/clock.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/mach-at91rm9200/generic.h → arch/arm/mach-at91/generic.h

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/generic.h
+ * linux/arch/arm/mach-at91/generic.h
  *
  *  Copyright (C) 2005 David Brownell
  *
@@ -12,11 +12,13 @@
 extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
+extern void __init at91sam9263_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */

arch/arm/mach-at91rm9200/gpio.c → arch/arm/mach-at91/gpio.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/gpio.c
+ * linux/arch/arm/mach-at91/gpio.c
  *
  * Copyright (C) 2005 HP Labs
  *

arch/arm/mach-at91rm9200/irq.c → arch/arm/mach-at91/irq.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/irq.c
+ * linux/arch/arm/mach-at91/irq.c
  *
  *  Copyright (C) 2004 SAN People
  *  Copyright (C) 2004 ATMEL

arch/arm/mach-at91rm9200/leds.c → arch/arm/mach-at91/leds.c

@@ -86,10 +86,6 @@ static int __init leds_init(void)
 	if (!at91_leds_timer || !at91_leds_cpu)
 		return -ENODEV;
 
-	/* Enable PIO to access the LEDs */
-	at91_set_gpio_output(at91_leds_timer, 1);
-	at91_set_gpio_output(at91_leds_cpu, 1);
-
 	leds_event = at91_leds_event;
 
 	leds_event(led_start);

arch/arm/mach-at91rm9200/pm.c → arch/arm/mach-at91/pm.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/pm.c
+ * arch/arm/mach-at91/pm.c
  * AT91 Power Management
  *
  * Copyright (C) 2005 David Brownell
@@ -80,6 +80,8 @@ static int at91_pm_verify_clocks(void)
 #warning "Check SAM9260 USB clocks"
 	} else if (cpu_is_at91sam9261()) {
 #warning "Check SAM9261 USB clocks"
+	} else if (cpu_is_at91sam9263()) {
+#warning "Check SAM9263 USB clocks"
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS

arch/arm/mach-ep93xx/Kconfig

@@ -51,6 +51,31 @@ config MACH_GESBC9312
 	  Say 'Y' here if you want your kernel to support the Glomation
 	  GESBC-9312-sx board.
 
+config MACH_MICRO9
+        bool
+        default n
+
+config MACH_MICRO9H
+       bool "Support Contec Hypercontrol Micro9-H"
+       select MACH_MICRO9
+       help
+         Say 'Y' here if you want your kernel to support the
+         Contec Hypercontrol Micro9-H board.
+
+config MACH_MICRO9M
+       bool "Support Contec Hypercontrol Micro9-M"
+       select MACH_MICRO9
+       help
+         Say 'Y' here if you want your kernel to support the
+         Contec Hypercontrol Micro9-M board.
+
+config MACH_MICRO9L
+       bool "Support Contec Hypercontrol Micro9-L"
+       select MACH_MICRO9
+       help
+         Say 'Y' here if you want your kernel to support the
+         Contec Hypercontrol Micro9-L board.
+
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
 	help

arch/arm/mach-ep93xx/Makefile

@@ -13,4 +13,5 @@ obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
 obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
 obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
+obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o

arch/arm/mach-ep93xx/clock.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <asm/div64.h>
 #include <asm/hardware.h>
@@ -124,7 +125,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	return (unsigned long)rate;
 }
 
-void ep93xx_clock_init(void)
+static int __init ep93xx_clock_init(void)
 {
 	u32 value;
 
@@ -153,4 +154,7 @@ void ep93xx_clock_init(void)
 	printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
 		clk_f.rate / 1000000, clk_h.rate / 1000000,
 		clk_p.rate / 1000000);
+
+	return 0;
 }
+arch_initcall(ep93xx_clock_init);

arch/arm/mach-ep93xx/core.c

@@ -152,22 +152,30 @@ struct sys_timer ep93xx_timer = {
 /*************************************************************************
  * GPIO handling for EP93xx
  *************************************************************************/
-static unsigned char gpio_int_enable[2];
-static unsigned char gpio_int_type1[2];
-static unsigned char gpio_int_type2[2];
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
 
-static void update_gpio_ab_int_params(int port)
+static void update_gpio_int_params(int abf)
 {
-	if (port == 0) {
+	if (abf == 0) {
 		__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
-		__raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
-	} else if (port == 1) {
+		__raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
+	} else if (abf == 1) {
 		__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
-		__raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
+		__raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
+	} else if (abf == 2) {
+		__raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
+		__raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
+		__raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
+		__raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
+	} else {
+		BUG();
 	}
 }
 
@@ -192,8 +200,13 @@ void gpio_line_config(int line, int direction)
 	local_irq_save(flags);
 	if (direction == GPIO_OUT) {
 		if (line >= 0 && line < 16) {
-			gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
-			update_gpio_ab_int_params(line >> 3);
+			/* Port A/B.  */
+			gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+			update_gpio_int_params(line >> 3);
+		} else if (line >= 40 && line < 48) {
+			/* Port F.  */
+			gpio_int_unmasked[2] &= ~(1 << (line & 7));
+			update_gpio_int_params(2);
 		}
 
 		v = __raw_readb(data_direction_register);
@@ -244,8 +257,7 @@ EXPORT_SYMBOL(gpio_line_set);
 /*************************************************************************
  * EP93xx IRQ handling
  *************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
-		struct irq_desc *desc)
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned char status;
 	int i;
@@ -267,37 +279,46 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
 	}
 }
 
-static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
+
+	desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] &= ~(1 << (line & 7));
-	update_gpio_ab_int_params(port);
+	gpio_int_unmasked[port] &= ~(1 << (line & 7));
+	update_gpio_int_params(port);
 
-	if (line >> 3) {
-		__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
-	} else {
+	if (port == 0) {
 		__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
+	} else if (port == 1) {
+		__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
+	} else if (port == 2) {
+		__raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
 	}
 }
 
-static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
+static void ep93xx_gpio_irq_mask(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] &= ~(1 << (line & 7));
-	update_gpio_ab_int_params(port);
+	gpio_int_unmasked[port] &= ~(1 << (line & 7));
+	update_gpio_int_params(port);
 }
 
-static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] |= 1 << (line & 7);
-	update_gpio_ab_int_params(port);
+	gpio_int_unmasked[port] |= 1 << (line & 7);
+	update_gpio_int_params(port);
 }
 
 
@@ -306,40 +327,51 @@ static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
  * edge (1) triggered, while gpio_int_type2 controls whether it
  * triggers on low/falling (0) or high/rising (1).
  */
-static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 	int port;
 	int line;
 
 	line = irq - IRQ_EP93XX_GPIO(0);
-	gpio_line_config(line, GPIO_IN);
+	if (line >= 0 && line < 16) {
+		gpio_line_config(line, GPIO_IN);
+	} else {
+		gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN);
+	}
 
 	port = line >> 3;
 	line &= 7;
 
 	if (type & IRQT_RISING) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] |= 1 << line;
 		gpio_int_type2[port] |= 1 << line;
 	} else if (type & IRQT_FALLING) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] |= 1 << line;
 		gpio_int_type2[port] &= ~(1 << line);
 	} else if (type & IRQT_HIGH) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] |= 1 << line;
 	} else if (type & IRQT_LOW) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] &= ~(1 << line);
+	} else {
+		gpio_int_enabled[port] &= ~(1 << line);
 	}
-	update_gpio_ab_int_params(port);
+	update_gpio_int_params(port);
 
 	return 0;
 }
 
-static struct irq_chip ep93xx_gpio_ab_irq_chip = {
-	.ack		= ep93xx_gpio_ab_irq_mask_ack,
-	.mask		= ep93xx_gpio_ab_irq_mask,
-	.unmask		= ep93xx_gpio_ab_irq_unmask,
-	.set_type	= ep93xx_gpio_ab_irq_type,
+static struct irq_chip ep93xx_gpio_irq_chip = {
+	.name		= "GPIO",
+	.ack		= ep93xx_gpio_irq_mask_ack,
+	.mask		= ep93xx_gpio_irq_mask,
+	.unmask		= ep93xx_gpio_irq_unmask,
+	.set_type	= ep93xx_gpio_irq_type,
 };
 
 
@@ -350,12 +382,21 @@ void __init ep93xx_init_irq(void)
 	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
 	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
 
-	for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
-		set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
+	for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
+		set_irq_chip(irq, &ep93xx_gpio_irq_chip);
 		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}
+
 	set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
 }
 
 
@@ -461,8 +502,6 @@ void __init ep93xx_init_devices(void)
 {
 	unsigned int v;
 
-	ep93xx_clock_init();
-
 	/*
 	 * Disallow access to MaverickCrunch initially.
 	 */
@@ -477,8 +516,4 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
-
-#ifdef CONFIG_CRUNCH
-	elf_hwcap |= HWCAP_CRUNCH;
-#endif
 }

arch/arm/mach-ep93xx/micro9.c

@@ -0,0 +1,157 @@
+/*
+ *  linux/arch/arm/mach-ep93xx/micro9.c
+ *
+ * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
+ *                   Manfred Gruber <manfred.gruber@contec.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <linux/mtd/physmap.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+static struct ep93xx_eth_data micro9_eth_data = {
+       .phy_id                 = 0x1f,
+};
+
+static struct resource micro9_eth_resource[] = {
+       {
+               .start  = EP93XX_ETHERNET_PHYS_BASE,
+               .end    = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+               .flags  = IORESOURCE_MEM,
+       }, {
+               .start  = IRQ_EP93XX_ETHERNET,
+               .end    = IRQ_EP93XX_ETHERNET,
+               .flags  = IORESOURCE_IRQ,
+       }
+};
+
+static struct platform_device micro9_eth_device = {
+       .name           = "ep93xx-eth",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &micro9_eth_data,
+       },
+       .num_resources = ARRAY_SIZE(micro9_eth_resource),
+       .resource       = micro9_eth_resource,
+};
+
+static void __init micro9_eth_init(void)
+{
+       memcpy(micro9_eth_data.dev_addr,
+               (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+       platform_device_register(&micro9_eth_device);
+}
+
+static void __init micro9_init(void)
+{
+       micro9_eth_init();
+}
+
+/*
+ * Micro9-H
+ */
+#ifdef CONFIG_MACH_MICRO9H
+static struct physmap_flash_data micro9h_flash_data = {
+       .width          = 4,
+};
+
+static struct resource micro9h_flash_resource = {
+       .start          = 0x10000000,
+       .end            = 0x13ffffff,
+       .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device micro9h_flash = {
+       .name           = "physmap-flash",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &micro9h_flash_data,
+       },
+       .num_resources  = 1,
+       .resource       = &micro9h_flash_resource,
+};
+
+static void __init micro9h_init(void)
+{
+       platform_device_register(&micro9h_flash);
+}
+
+static void __init micro9h_init_machine(void)
+{
+       ep93xx_init_devices();
+       micro9_init();
+       micro9h_init();
+}
+
+MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
+       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = micro9h_init_machine,
+MACHINE_END
+#endif
+
+/*
+ * Micro9-M
+ */
+#ifdef CONFIG_MACH_MICRO9M
+static void __init micro9m_init_machine(void)
+{
+       ep93xx_init_devices();
+       micro9_init();
+}
+
+MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
+       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = micro9m_init_machine,
+MACHINE_END
+#endif
+
+/*
+ * Micro9-L
+ */
+#ifdef CONFIG_MACH_MICRO9L
+static void __init micro9l_init_machine(void)
+{
+       ep93xx_init_devices();
+       micro9_init();
+}
+
+MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
+       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = micro9l_init_machine,
+MACHINE_END
+#endif
+

arch/arm/mach-iop13xx/irq.c

@@ -250,11 +250,14 @@ static struct irq_chip iop13xx_irqchip4 = {
 	.unmask = iop13xx_irq_unmask3,
 };
 
+extern void iop_init_cp6_handler(void);
+
 void __init iop13xx_init_irq(void)
 {
 	unsigned int i;
 
 	u32 cp_flags = iop13xx_cp6_save();
+	iop_init_cp6_handler();
 
 	/* disable all interrupts */
 	write_intctl_0(0);

arch/arm/mach-iop32x/irq.c

@@ -60,6 +60,8 @@ void __init iop32x_init_irq(void)
 {
 	int i;
 
+	iop_init_cp6_handler();
+
 	intctl_write(0);
 	intstr_write(0);
 	if (machine_is_glantank() ||

arch/arm/mach-iop32x/n2100.c

@@ -120,6 +120,20 @@ static struct hw_pci n2100_pci __initdata = {
 	.map_irq	= n2100_pci_map_irq,
 };
 
+/*
+ * Both r8169 chips on the n2100 exhibit PCI parity problems.  Set
+ * the ->broken_parity_status flag for both ports so that the r8169
+ * driver knows it should ignore error interrupts.
+ */
+static void n2100_fixup_r8169(struct pci_dev *dev)
+{
+	if (dev->bus->number == 0 &&
+	    (dev->devfn == PCI_DEVFN(1, 0) ||
+	     dev->devfn == PCI_DEVFN(2, 0)))
+		dev->broken_parity_status = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
+
 static int __init n2100_pci_init(void)
 {
 	if (machine_is_n2100())

arch/arm/mach-iop33x/irq.c

@@ -110,6 +110,8 @@ void __init iop33x_init_irq(void)
 {
 	int i;
 
+	iop_init_cp6_handler();
+
 	intctl0_write(0);
 	intctl1_write(0);
 	intstr0_write(0);

arch/arm/mach-ixp4xx/Kconfig

@@ -17,7 +17,7 @@ config MACH_NSLU2
 	  NSLU2 NAS device. For more information on this platform,
 	  see http://www.nslu2-linux.org
 
-config ARCH_AVILA
+config MACH_AVILA
 	bool "Avila"
 	select PCI
 	help
@@ -25,6 +25,14 @@ config ARCH_AVILA
 	  Avila Network Platform. For more information on this platform,
 	  see <file:Documentation/arm/IXP4xx>.
 
+config MACH_LOFT
+    bool "Loft"
+    depends on MACH_AVILA
+    help
+	  Say 'Y' here if you want your kernel to support the Giant
+	  Shoulder Inc Loft board (a minor variation on the standard
+	  Gateworks Avila Network Platform).
+
 config ARCH_ADI_COYOTE
 	bool "Coyote"
 	select PCI
@@ -86,7 +94,7 @@ config MACH_NAS100D
 #
 config	ARCH_IXDP4XX
 	bool
-	depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465
+	depends on ARCH_IXDP425 || MACH_IXDP465
 	default y
 
 #

arch/arm/mach-ixp4xx/Makefile

@@ -6,6 +6,7 @@ obj-pci-y	:=
 obj-pci-n	:=
 
 obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
+obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
@@ -15,6 +16,7 @@ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
 obj-y	+= common.o
 
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
+obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o

arch/arm/mach-ixp4xx/avila-pci.c

@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/avila-pci.c
+ *
+ * Gateworks Avila board-level PCI initialization
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp-pci.c
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+void __init avila_pci_preinit(void)
+{
+	set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[AVILA_PCI_IRQ_LINES] = {
+		IRQ_AVILA_PCI_INTA,
+		IRQ_AVILA_PCI_INTB,
+		IRQ_AVILA_PCI_INTC,
+		IRQ_AVILA_PCI_INTD
+	};
+
+	int irq = -1;
+
+	if (slot >= 1 &&
+	slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) &&
+		pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) {
+		irq = pci_irq_table[(slot + pin - 2) % 4];
+	}
+
+	return irq;
+}
+
+struct hw_pci avila_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit	= avila_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= avila_map_irq,
+};
+
+int __init avila_pci_init(void)
+{
+	if (machine_is_avila() || machine_is_loft())
+		pci_common_init(&avila_pci);
+	return 0;
+}
+
+subsys_initcall(avila_pci_init);
+

arch/arm/mach-ixp4xx/avila-setup.c

@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-ixp4xx/avila-setup.c
+ *
+ * Gateworks Avila board-setup
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp-setup.c
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data avila_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource avila_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device avila_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &avila_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &avila_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
+	.sda_pin	= AVILA_SDA_PIN,
+	.scl_pin	= AVILA_SCL_PIN,
+};
+
+static struct platform_device avila_i2c_controller = {
+	.name		= "IXP4XX-I2C",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &avila_i2c_gpio_pins,
+	},
+	.num_resources	= 0
+};
+
+static struct resource avila_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port avila_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device avila_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= avila_uart_data,
+	.num_resources		= 2,
+	.resource		= avila_uart_resources
+};
+
+static struct resource avila_pata_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "intrq",
+		.start	= IRQ_IXP4XX_GPIO12,
+		.end	= IRQ_IXP4XX_GPIO12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ixp4xx_pata_data avila_pata_data = {
+	.cs0_bits	= 0xbfff0043,
+	.cs1_bits	= 0xbfff0043,
+};
+
+static struct platform_device avila_pata = {
+	.name			= "pata_ixp4xx_cf",
+	.id			= 0,
+	.dev.platform_data      = &avila_pata_data,
+	.num_resources		= ARRAY_SIZE(avila_pata_resources),
+	.resource		= avila_pata_resources,
+};
+
+static struct platform_device *avila_devices[] __initdata = {
+	&avila_i2c_controller,
+	&avila_flash,
+	&avila_uart
+};
+
+static void __init avila_init(void)
+{
+	ixp4xx_sys_init();
+
+	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	avila_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
+
+	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
+	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
+
+	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
+	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
+
+	platform_device_register(&avila_pata);
+
+}
+
+MACHINE_START(AVILA, "Gateworks Avila Network Platform")
+	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= avila_init,
+MACHINE_END
+
+ /*
+  * Loft is functionally equivalent to Avila except that it has a
+  * different number for the maximum PCI devices.  The MACHINE
+  * structure below is identical to Avila except for the comment.
+  */
+#ifdef CONFIG_MACH_LOFT
+MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
+	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= avila_init,
+MACHINE_END
+#endif
+

arch/arm/mach-ixp4xx/ixdp425-pci.c

@@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
 int __init ixdp425_pci_init(void)
 {
 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-			machine_is_avila() || machine_is_ixdp465())
+			machine_is_ixdp465())
 		pci_common_init(&ixdp425_pci);
 	return 0;
 }

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -156,23 +156,3 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	.init_machine	= ixdp425_init,
 MACHINE_END
 #endif
-
-/*
- * Avila is functionally equivalent to IXDP425 except that it adds
- * a CF IDE slot hanging off the expansion bus. When we have a 
- * driver for IXP4xx CF IDE with driver model support we'll move
- * Avila to it's own setup file.
- */
-#ifdef CONFIG_ARCH_AVILA
-MACHINE_START(AVILA, "Gateworks Avila Network Platform")
-	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixp4xx_map_io,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
-	.init_machine	= ixdp425_init,
-MACHINE_END
-#endif
-

arch/arm/mach-ns9xxx/Kconfig

@@ -0,0 +1,21 @@
+if ARCH_NS9XXX
+
+menu "NS9xxx Implementations"
+
+config MACH_CC9P9360DEV
+	bool "Connect Core 9P 9360 on an A9M9750 Devboard"
+	select PROCESSOR_NS9360
+	select BOARD_A9M9750DEV
+	help
+	  Say Y here if you are using the Digi Connect Core 9P 9360
+	  on an A9M9750 Development Board.
+
+config PROCESSOR_NS9360
+	bool
+
+config BOARD_A9M9750DEV
+	bool
+
+endmenu
+
+endif

arch/arm/mach-ns9xxx/Makefile

@@ -0,0 +1,5 @@
+obj-y := irq.o time.o generic.o
+
+obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
+
+obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o

arch/arm/mach-ns9xxx/Makefile.boot

@@ -0,0 +1,2 @@
+zreladdr-y := 0x108000
+params_phys-y := 0x100

arch/arm/mach-ns9xxx/board-a9m9750dev.c

@@ -0,0 +1,199 @@
+/*
+ * arch/arm/mach-ns9xxx/board-a9m9750dev.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/irq.h>
+
+#include <asm/mach/map.h>
+
+#include <asm/arch-ns9xxx/board.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-mem.h>
+#include <asm/arch-ns9xxx/regs-bbu.h>
+#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+
+#include "board-a9m9750dev.h"
+
+static struct map_desc board_a9m9750dev_io_desc[] __initdata = {
+	{ /* FPGA on CS0 */
+		.virtual = io_p2v(NS9XXX_CSxSTAT_PHYS(0)),
+		.pfn = __phys_to_pfn(NS9XXX_CSxSTAT_PHYS(0)),
+		.length = NS9XXX_CS0STAT_LENGTH,
+		.type = MT_DEVICE,
+	},
+};
+
+void __init board_a9m9750dev_map_io(void)
+{
+	iotable_init(board_a9m9750dev_io_desc,
+		     ARRAY_SIZE(board_a9m9750dev_io_desc));
+}
+
+static void a9m9750dev_fpga_ack_irq(unsigned int irq)
+{
+	/* nothing */
+}
+
+static void a9m9750dev_fpga_mask_irq(unsigned int irq)
+{
+	FPGA_IER &= ~(1 << (irq - FPGA_IRQ(0)));
+}
+
+static void a9m9750dev_fpga_maskack_irq(unsigned int irq)
+{
+	a9m9750dev_fpga_mask_irq(irq);
+	a9m9750dev_fpga_ack_irq(irq);
+}
+
+static void a9m9750dev_fpga_unmask_irq(unsigned int irq)
+{
+	FPGA_IER |= 1 << (irq - FPGA_IRQ(0));
+}
+
+static struct irq_chip a9m9750dev_fpga_chip = {
+	.ack		= a9m9750dev_fpga_ack_irq,
+	.mask		= a9m9750dev_fpga_mask_irq,
+	.mask_ack	= a9m9750dev_fpga_maskack_irq,
+	.unmask		= a9m9750dev_fpga_unmask_irq,
+};
+
+static void a9m9750dev_fpga_demux_handler(unsigned int irq,
+		struct irq_desc *desc)
+{
+	int stat = FPGA_ISR;
+
+	while (stat != 0) {
+		int irqno = fls(stat) - 1;
+
+		stat &= ~(1 << irqno);
+
+		desc = irq_desc + FPGA_IRQ(irqno);
+
+		desc_handle_irq(irqno, desc);
+	}
+}
+
+void __init board_a9m9750dev_init_irq(void)
+{
+	u32 reg;
+	int i;
+
+	/*
+	 * configure gpio for IRQ_EXT2
+	 * use GPIO 11, because GPIO 32 is used for the LCD
+	 */
+	/* XXX: proper GPIO handling */
+	BBU_GC(2) &= ~0x2000;
+
+	for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
+		set_irq_chip(i, &a9m9750dev_fpga_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	/* IRQ_EXT2: level sensitive + active low */
+	reg = SYS_EIC(2);
+	REGSET(reg, SYS_EIC, PLTY, AL);
+	REGSET(reg, SYS_EIC, LVEDG, LEVEL);
+	SYS_EIC(2) = reg;
+
+	set_irq_chained_handler(IRQ_EXT2,
+			a9m9750dev_fpga_demux_handler);
+}
+
+static struct plat_serial8250_port board_a9m9750dev_serial8250_port[] = {
+	{
+		.iobase         = FPGA_UARTA_BASE,
+		.membase        = (unsigned char*)FPGA_UARTA_BASE,
+		.mapbase        = FPGA_UARTA_BASE,
+		.irq            = IRQ_FPGA_UARTA,
+		.iotype         = UPIO_MEM,
+		.uartclk        = 18432000,
+		.regshift       = 0,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+	}, {
+		.iobase         = FPGA_UARTB_BASE,
+		.membase        = (unsigned char*)FPGA_UARTB_BASE,
+		.mapbase        = FPGA_UARTB_BASE,
+		.irq            = IRQ_FPGA_UARTB,
+		.iotype         = UPIO_MEM,
+		.uartclk        = 18432000,
+		.regshift       = 0,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+	}, {
+		.iobase         = FPGA_UARTC_BASE,
+		.membase        = (unsigned char*)FPGA_UARTC_BASE,
+		.mapbase        = FPGA_UARTC_BASE,
+		.irq            = IRQ_FPGA_UARTC,
+		.iotype         = UPIO_MEM,
+		.uartclk        = 18432000,
+		.regshift       = 0,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+	}, {
+		.iobase         = FPGA_UARTD_BASE,
+		.membase        = (unsigned char*)FPGA_UARTD_BASE,
+		.mapbase        = FPGA_UARTD_BASE,
+		.irq            = IRQ_FPGA_UARTD,
+		.iotype         = UPIO_MEM,
+		.uartclk        = 18432000,
+		.regshift       = 0,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+	}, {
+		/* end marker */
+	},
+};
+
+static struct platform_device board_a9m9750dev_serial_device = {
+	.name = "serial8250",
+	.dev = {
+		.platform_data = board_a9m9750dev_serial8250_port,
+	},
+};
+
+static struct platform_device *board_a9m9750dev_devices[] __initdata = {
+	&board_a9m9750dev_serial_device,
+};
+
+void __init board_a9m9750dev_init_machine(void)
+{
+	u32 reg;
+
+	/* setup static CS0: memory base ... */
+	REGSETIM(SYS_SMCSSMB(0), SYS_SMCSSMB, CSxB,
+			NS9XXX_CSxSTAT_PHYS(0) >> 12);
+
+	/* ... and mask */
+	reg = SYS_SMCSSMM(0);
+	REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff);
+	REGSET(reg, SYS_SMCSSMM, CSEx, EN);
+	SYS_SMCSSMM(0) = reg;
+
+	/* setup static CS0: memory configuration */
+	reg = MEM_SMC(0);
+	REGSET(reg, MEM_SMC, WSMC, OFF);
+	REGSET(reg, MEM_SMC, BSMC, OFF);
+	REGSET(reg, MEM_SMC, EW, OFF);
+	REGSET(reg, MEM_SMC, PB, 1);
+	REGSET(reg, MEM_SMC, PC, AL);
+	REGSET(reg, MEM_SMC, PM, DIS);
+	REGSET(reg, MEM_SMC, MW, 8);
+	MEM_SMC(0) = reg;
+
+	/* setup static CS0: timing */
+	MEM_SMWED(0) = 0x2;
+	MEM_SMOED(0) = 0x2;
+	MEM_SMRD(0) = 0x6;
+	MEM_SMWD(0) = 0x6;
+
+	platform_add_devices(board_a9m9750dev_devices,
+			ARRAY_SIZE(board_a9m9750dev_devices));
+}
+

arch/arm/mach-ns9xxx/board-a9m9750dev.h

@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ns9xxx/board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/init.h>
+
+void __init board_a9m9750dev_map_io(void);
+void __init board_a9m9750dev_init_machine(void);
+void __init board_a9m9750dev_init_irq(void);

arch/arm/mach-ns9xxx/generic.c

@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/generic.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-mem.h>
+#include <asm/arch-ns9xxx/board.h>
+
+static struct map_desc standard_io_desc[] __initdata = {
+	{ /* BBus */
+		.virtual = io_p2v(0x90000000),
+		.pfn = __phys_to_pfn(0x90000000),
+		.length = 0x00700000,
+		.type = MT_DEVICE,
+	}, { /* AHB */
+		.virtual = io_p2v(0xa0100000),
+		.pfn = __phys_to_pfn(0xa0100000),
+		.length = 0x00900000,
+		.type = MT_DEVICE,
+	},
+};
+
+void __init ns9xxx_map_io(void)
+{
+	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
+
+void __init ns9xxx_init_machine(void)
+{
+}

arch/arm/mach-ns9xxx/generic.h

@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ns9xxx/generic.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/time.h>
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+void __init ns9xxx_init_irq(void);
+void __init ns9xxx_map_io(void);
+void __init ns9xxx_init_machine(void);
+
+extern struct sys_timer ns9xxx_timer;

arch/arm/mach-ns9xxx/irq.c

@@ -0,0 +1,94 @@
+/*
+ * arch/arm/mach-ns9xxx/irq.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/interrupt.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/irqs.h>
+#include <asm/arch-ns9xxx/board.h>
+
+#include "generic.h"
+
+static void ns9xxx_ack_irq_timer(unsigned int irq)
+{
+	u32 tc = SYS_TC(irq - IRQ_TIMER0);
+
+	REGSET(tc, SYS_TCx, INTC, SET);
+	SYS_TC(irq - IRQ_TIMER0) = tc;
+
+	REGSET(tc, SYS_TCx, INTC, UNSET);
+	SYS_TC(irq - IRQ_TIMER0) = tc;
+}
+
+void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = {
+	[IRQ_TIMER0] = ns9xxx_ack_irq_timer,
+	[IRQ_TIMER1] = ns9xxx_ack_irq_timer,
+	[IRQ_TIMER2] = ns9xxx_ack_irq_timer,
+	[IRQ_TIMER3] = ns9xxx_ack_irq_timer,
+};
+
+static void ns9xxx_mask_irq(unsigned int irq)
+{
+	/* XXX: better use cpp symbols */
+	SYS_IC(irq / 4) &= ~(1 << (7 + 8 * (3 - (irq & 3))));
+}
+
+static void ns9xxx_ack_irq(unsigned int irq)
+{
+	if (!ns9xxx_ack_irq_functions[irq]) {
+		printk(KERN_ERR "no ack function for irq %u\n", irq);
+		BUG();
+	}
+
+	ns9xxx_ack_irq_functions[irq](irq);
+	SYS_ISRADDR = 0;
+}
+
+static void ns9xxx_maskack_irq(unsigned int irq)
+{
+	ns9xxx_mask_irq(irq);
+	ns9xxx_ack_irq(irq);
+}
+
+static void ns9xxx_unmask_irq(unsigned int irq)
+{
+	/* XXX: better use cpp symbols */
+	SYS_IC(irq / 4) |= 1 << (7 + 8 * (3 - (irq & 3)));
+}
+
+static struct irq_chip ns9xxx_chip = {
+	.ack		= ns9xxx_ack_irq,
+	.mask		= ns9xxx_mask_irq,
+	.mask_ack	= ns9xxx_maskack_irq,
+	.unmask		= ns9xxx_unmask_irq,
+};
+
+void __init ns9xxx_init_irq(void)
+{
+	int i;
+
+	/* disable all IRQs */
+	for (i = 0; i < 8; ++i)
+		SYS_IC(i) = (4 * i) << 24 | (4 * i + 1) << 16 |
+			(4 * i + 2) << 8 | (4 * i + 3);
+
+	/* simple interrupt prio table:
+	 * prio(x) < prio(y) <=> x < y
+	 */
+	for (i = 0; i < 32; ++i)
+		SYS_IVA(i) = i;
+
+	for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) {
+		set_irq_chip(i, &ns9xxx_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+}

arch/arm/mach-ns9xxx/mach-cc9p9360dev.c

@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "board-a9m9750dev.h"
+#include "generic.h"
+
+static void __init mach_cc9p9360dev_map_io(void)
+{
+	ns9xxx_map_io();
+	board_a9m9750dev_map_io();
+}
+
+static void __init mach_cc9p9360dev_init_irq(void)
+{
+	ns9xxx_init_irq();
+	board_a9m9750dev_init_irq();
+}
+
+static void __init mach_cc9p9360dev_init_machine(void)
+{
+	ns9xxx_init_machine();
+	board_a9m9750dev_init_machine();
+}
+
+MACHINE_START(CC9P9360DEV, "Connect Core 9P 9360 on an A9M9750 Devboard")
+	.map_io = mach_cc9p9360dev_map_io,
+	.init_irq = mach_cc9p9360dev_init_irq,
+	.init_machine = mach_cc9p9360dev_init_machine,
+	.timer = &ns9xxx_timer,
+	.boot_params = 0x100,
+MACHINE_END

arch/arm/mach-ns9xxx/time.c

@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-ns9xxx/time.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/clock.h>
+#include <asm/arch-ns9xxx/irqs.h>
+#include <asm/arch/system.h>
+#include "generic.h"
+
+#define TIMERCLOCKSELECT 64
+
+static u32 usecs_per_tick;
+
+static irqreturn_t
+ns9xxx_timer_interrupt(int irq, void *dev_id)
+{
+	write_seqlock(&xtime_lock);
+	timer_tick();
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned long ns9xxx_timer_gettimeoffset(void)
+{
+	/* return the microseconds which have passed since the last interrupt
+	 * was _serviced_.  That is, if an interrupt is pending or the counter
+	 * reloads, return one periode more. */
+
+	u32 counter1 = SYS_TR(0);
+	int pending = SYS_ISR & (1 << IRQ_TIMER0);
+	u32 counter2 = SYS_TR(0);
+	u32 elapsed;
+
+	if (pending || counter2 > counter1)
+		elapsed = 2 * SYS_TRC(0) - counter2;
+	else
+		elapsed = SYS_TRC(0) - counter1;
+
+	return (elapsed * usecs_per_tick) >> 16;
+
+}
+
+static struct irqaction ns9xxx_timer_irq = {
+	.name = "NS9xxx Timer Tick",
+	.flags = IRQF_DISABLED | IRQF_TIMER,
+	.handler = ns9xxx_timer_interrupt,
+};
+
+static void __init ns9xxx_timer_init(void)
+{
+	int tc;
+
+	usecs_per_tick =
+		SH_DIV(1000000 * TIMERCLOCKSELECT, ns9xxx_cpuclock(), 16);
+
+	/* disable timer */
+	if ((tc = SYS_TC(0)) & SYS_TCx_TEN)
+		SYS_TC(0) = tc & ~SYS_TCx_TEN;
+
+	SYS_TRC(0) = SH_DIV(ns9xxx_cpuclock(), (TIMERCLOCKSELECT * HZ), 0);
+
+	REGSET(tc, SYS_TCx, TEN, EN);
+	REGSET(tc, SYS_TCx, TLCS, DIV64); /* This must match TIMERCLOCKSELECT */
+	REGSET(tc, SYS_TCx, INTS, EN);
+	REGSET(tc, SYS_TCx, UDS, DOWN);
+	REGSET(tc, SYS_TCx, TDBG, STOP);
+	REGSET(tc, SYS_TCx, TSZ, 32);
+	REGSET(tc, SYS_TCx, REN, EN);
+	SYS_TC(0) = tc;
+
+	setup_irq(IRQ_TIMER0, &ns9xxx_timer_irq);
+}
+
+struct sys_timer ns9xxx_timer = {
+	.init = ns9xxx_timer_init,
+	.offset = ns9xxx_timer_gettimeoffset,
+};

arch/arm/mach-pxa/generic.c

@@ -338,6 +338,27 @@ static struct platform_device i2c_device = {
 	.num_resources	= ARRAY_SIZE(i2c_resources),
 };
 
+#ifdef CONFIG_PXA27x
+static struct resource i2c_power_resources[] = {
+	{
+		.start	= 0x40f00180,
+		.end	= 0x40f001a3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_power_device = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= i2c_power_resources,
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+};
+#endif
+
 void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 {
 	i2c_device.dev.platform_data = info;
@@ -392,6 +413,9 @@ static struct platform_device *devices[] __initdata = {
 	&stuart_device,
 	&pxaficp_device,
 	&i2c_device,
+#ifdef CONFIG_PXA27x
+	&i2c_power_device,
+#endif
 	&i2s_device,
 	&pxartc_device,
 };

arch/arm/mach-realview/Kconfig

@@ -10,10 +10,21 @@ config MACH_REALVIEW_EB
 config REALVIEW_MPCORE
 	bool "Support MPcore tile"
 	depends on MACH_REALVIEW_EB
+	select CACHE_L2X0
 	help
 	  Enable support for the MPCore tile on the Realview platform.
 	  Since there are device address and interrupt differences, a
 	  kernel built with this option enabled is not compatible with
 	  other tiles.
 
+config REALVIEW_MPCORE_REVB
+	bool "Support MPcore RevB tile"
+	depends on REALVIEW_MPCORE
+	default n
+	help
+	  Enable support for the MPCore RevB tile on the Realview platform.
+	  Since there are device address differences, a
+	  kernel built with this option enabled is not compatible with
+	  other tiles.
+
 endmenu

arch/arm/mach-realview/platsmp.c

@@ -52,13 +52,14 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+	gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
 
 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
 	pen_release = -1;
+	smp_wmb();
 
 	/*
 	 * Synchronise with the boot thread.
@@ -102,6 +103,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
+		smp_rmb();
 		if (pen_release == -1)
 			break;
 

arch/arm/mach-realview/realview_eb.c

@@ -31,6 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -57,7 +58,26 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_REALVIEW_MPCORE
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_GIC1_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC1_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_GIC1_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC1_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_MPCORE_L220_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_MPCORE_L220_BASE),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	},
+#endif
+	{
 		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
 		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
 		.length		= SZ_4K,
@@ -138,19 +158,29 @@ static void __init gic_init_irq(void)
 #ifdef CONFIG_REALVIEW_MPCORE
 	unsigned int pldctrl;
 	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ 0xd8);
+	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_MPCORE_SYS_PLD_CTRL1);
 	pldctrl |= 0x00800000;	/* New irq mode */
-	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
 	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 #endif
-	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
-	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+	gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
+#ifdef CONFIG_REALVIEW_MPCORE
+	gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64);
+	gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE));
+	gic_cascade_irq(1, IRQ_EB_IRQ1);
+#endif
 }
 
 static void __init realview_eb_init(void)
 {
 	int i;
 
+#ifdef CONFIG_REALVIEW_MPCORE
+	/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
+	 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
+	l2x0_init(__io_address(REALVIEW_MPCORE_L220_BASE), 0x00790000, 0xfe000fff);
+#endif
 	clk_register(&realview_clcd_clk);
 
 	platform_device_register(&realview_flash_device);

arch/arm/mach-s3c2400/Kconfig

@@ -0,0 +1,13 @@
+# arch/arm/mach-s3c2400/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+
+
+menu "S3C2400 Machines"
+
+
+endmenu
+

arch/arm/mach-s3c2400/Makefile

@@ -0,0 +1,15 @@
+# arch/arm/mach-s3c2400/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2400)	+= gpio.o
+
+# Machine support
+

arch/arm/mach-s3c2410/s3c2400-gpio.c → arch/arm/mach-s3c2400/gpio.c

@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2400-gpio.c
+/* linux/arch/arm/mach-s3c2400/gpio.c
  *
  * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
  *

arch/arm/mach-s3c2410/Kconfig

@@ -1,54 +1,51 @@
-if ARCH_S3C2410
+# arch/arm/mach-s3c2410/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
 
-menu "S3C24XX Implementations"
+config CPU_S3C2410
+	bool
+	depends on ARCH_S3C2410
+	select S3C2410_CLOCK
+	select S3C2410_GPIO
+	select S3C2410_PM if PM
+	help
+	  Support for S3C2410 and S3C2410A family from the S3C24XX line
+	  of Samsung Mobile CPUs.
 
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
+config CPU_S3C2410_DMA
+	bool
+	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
+	default y if CPU_S3C2410 || CPU_S3C2442
 	help
-	   Say Y here if you are using the American Microsystems M5900 Series
-           <http://www.amltd.com>
+	  DMA device selection for S3C2410 and compatible CPUs
 
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select CPU_S3C2440
-	select PM_SIMTEC if PM
+config S3C2410_PM
+	bool
 	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
+	  Power Management code common to S3C2410 and better
 
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select CPU_S3C2440
-	select PM_SIMTEC if PM
+config S3C2410_GPIO
+	bool
 	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
+	  GPIO code for S3C2410 and similar processors
 
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
-	select ISA
+config S3C2410_CLOCK
+	bool
 	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
+	  Clock code for the S3C2410, and similar processors
 
-	  Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
 
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
+menu "S3C2410 Machines"
 
-config PM_H1940
-	bool
+config ARCH_SMDK2410
+	bool "SMDK2410/A9M2410"
+	select CPU_S3C2410
+	select MACH_SMDK
 	help
-	  Internal node for H1940 and related PM
+	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
+           <http://www.fsforth.de>
 
 config ARCH_H1940
 	bool "IPAQ H1940"
@@ -57,7 +54,10 @@ config ARCH_H1940
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
-	  <http://www.handhelds.org/projects/h1940.html>.
+config PM_H1940
+	bool
+	help
+	  Internal node for H1940 and related PM
 
 config MACH_N30
 	bool "Acer N30"
@@ -65,53 +65,36 @@ config MACH_N30
 	help
 	  Say Y here if you are using the Acer N30
 
-	  <http://zoo.weinigel.se/n30>.
-
-config MACH_SMDK
-	bool
-	help
-	  Common machine code for SMDK2410 and SMDK2440
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
+config ARCH_BAST
+	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
-	select MACH_SMDK
+	select PM_SIMTEC if PM
+	select ISA
 	help
-	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
-           <http://www.fsforth.de>
+	  Say Y here if you are using the Simtec Electronics EB2410ITX
+	  development board (also known as BAST)
 
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select CPU_S3C2440
-	select MACH_SMDK
+config MACH_OTOM
+ 	bool "NexVision OTOM Board"
+ 	select CPU_S3C2410
 	help
-	  Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	depends on ARCH_S3C2440
-	default y if ARCH_S3C2440
-	select CPU_S3C2440
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	depends on ARCH_S3C2440
-	select CPU_S3C2442
+ 	  Say Y here if you are using the Nex Vision OTOM board
 
-config MACH_S3C2413
-	bool
+config MACH_AML_M5900
+	bool "AML M5900 Series"
+	select CPU_S3C2410
+	select PM_SIMTEC if PM
 	help
-	  Internal node for S3C2413 version of SMDK2413, so that
-	  machine_is_s3c2413() will work when MACH_SMDK2413 is
-	  selected
+	   Say Y here if you are using the American Microsystems M5900 Series
+           <http://www.amltd.com>
 
-config MACH_SMDK2413
-	bool "SMDK2413"
-	select CPU_S3C2412
-	select MACH_S3C2413
-	select MACH_SMDK
+config BAST_PC104_IRQ
+	bool "BAST PC104 IRQ support"
+	depends on ARCH_BAST
+	default y
 	help
-	  Say Y here if you are using an SMDK2413
+	  Say Y	here to enable the PC104 IRQ routing on the
+	  Simtec BAST (EB2410ITX)
 
 config MACH_VR1000
 	bool "Thorcom VR1000"
@@ -120,202 +103,11 @@ config MACH_VR1000
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
-	  This linux port is currently being maintained by Simtec, on behalf
-	  of Thorcom. Any queries, please contact Thorcom first.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select CPU_S3C2440
-	select PM_H1940 if PM
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-	  See <http://www.handhelds.org/projects/rx3715.html> for more
-	  information on this project
-
-config MACH_OTOM
- 	bool "NexVision OTOM Board"
- 	select CPU_S3C2410
-	help
- 	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_NEXCODER_2440
- 	bool "NexVision NEXCODER 2440 Light Board"
- 	select CPU_S3C2440
-	help
- 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_VSTMS
-	bool "VMSTMS"
-	select CPU_S3C2412
+config MACH_QT2410
+	bool "QT2410"
+	select CPU_S3C2410
 	help
-	  Say Y here if you are using an VSTMS board
+	   Say Y here if you are using the Armzone QT2410
 
 endmenu
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-config CPU_S3C2410_DMA
-	bool
-	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
-	help
-	  DMA device selection for S3C2410 and compatible CPUs
-
-config CPU_S3C2410
-	bool
-	depends on ARCH_S3C2410
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-# internal node to signify if we are only dealing with an S3C2412
-
-config CPU_S3C2412_ONLY
-	bool
-	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
-	default y if CPU_S3C2412
-
-config S3C2412_PM
-	bool
-	help
-	  Internal config node to apply S3C2412 power management
-
-config CPU_S3C2412
-	bool
-	depends on ARCH_S3C2410
-	select S3C2412_PM if PM
-	help
-	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C244X
-	bool
-	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C2440
-	bool
-	depends on ARCH_S3C2410
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool
-	depends on ARCH_S3C2420
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-comment "S3C2410 Boot"
-
-config S3C2410_BOOT_WATCHDOG
-	bool "S3C2410 Initialisation watchdog"
-	depends on ARCH_S3C2410 && S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-	  Although this uses the same hardware unit as the kernel watchdog
-	  driver, it is not a replacement for it. If you use this option,
-	  you will have to use the watchdg driver to either stop the timeout
-	  or restart it. If you do not, then your kernel will reboot after
-	  startup.
-
-	  The driver uses a fixed timeout value, so the exact time till the
-	  system resets depends on the value of PCLK. The timeout on an
-	  200MHz s3c2410 should be about 30 seconds.
-
-config S3C2410_BOOT_ERROR_RESET
-	bool "S3C2410 Reboot on decompression error"
-	depends on ARCH_S3C2410
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-
-comment "S3C2410 Setup"
-
-config S3C2410_DMA
-	bool "S3C2410 DMA support"
-	depends on ARCH_S3C2410
-	help
-	  S3C2410 DMA support. This is needed for drivers like sound which
-	  use the S3C2410's DMA system to move data to and from the
-	  peripheral blocks.
-
-config S3C2410_DMA_DEBUG
-	bool "S3C2410 DMA support debug"
-	depends on ARCH_S3C2410 && S3C2410_DMA
-	help
-	  Enable debugging output for the DMA code. This option sends info
-	  to the kernel log, at priority KERN_DEBUG.
-
-	  Note, it is easy to create and fill the log buffer in a small
-	  amount of time, as well as using an significant percentage of
-	  the CPU time doing so.
-
-
-config S3C2410_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on ARCH_S3C2410 && PM
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C2410_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on ARCH_S3C2410 && PM && CRC32
-	help
- 	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-config S3C2410_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-config PM_SIMTEC
-	bool
-	help
-	  Common power management code for systems that are
-	  compatible with the Simtec style of power management
-
-config S3C2410_LOWLEVEL_UART_PORT
-	int "S3C2410 UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
-	  Note, this does not affect the port used by the debug messages,
-	  which is a separate configuration.
-
-endif

arch/arm/mach-s3c2410/Makefile

@@ -1,92 +1,31 @@
-
+# arch/arm/mach-s3c2410/Makefile
 #
-# Makefile for the linux kernel.
+# Copyright 2007 Simtec Electronics
 #
+# Licensed under GPLv2
 
-# Object file lists.
-
-obj-y			:= cpu.o irq.o time.o gpio.o clock.o devs.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-obj-dma-y		:=
-obj-dma-n		:=
-
-# DMA
-obj-$(CONFIG_S3C2410_DMA)	+= dma.o
-
-# S3C2400 support files
-obj-$(CONFIG_CPU_S3C2400)	+= s3c2400-gpio.o
-
-# S3C2410 support files
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-gpio.o
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-irq.o
-
-obj-$(CONFIG_S3C2410_PM)	+= s3c2410-pm.o s3c2410-sleep.o
-obj-$(CONFIG_CPU_S3C2410_DMA)	+= s3c2410-dma.o
-
-# Power Management support
-
-obj-$(CONFIG_PM)		+= pm.o sleep.o
-obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
-obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
-
-# S3C2412 support
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-irq.o
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-clock.o
-obj-dma-$(CONFIG_CPU_S3C2412)	+= s3c2412-dma.o
-
-obj-$(CONFIG_S3C2412_PM)	+= s3c2412-pm.o
-
-#
-# S3C244X support
-
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-
-# Clock control
-
-obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
-
-# S3C2440 support
-
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o s3c2440-dsc.o
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-irq.o
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-clock.o
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2410-gpio.o
-obj-dma-$(CONFIG_CPU_S3C2440)	+= s3c2440-dma.o
+obj-$(CONFIG_CPU_S3C2410)	+= irq.o
+obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
+obj-$(CONFIG_S3C2410_CLOCK)	+= clock.o
 
-# S3C2442 support
+# Machine support
 
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442-clock.o
-
-# bast extras
-
-obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
-
-# merge in dma objects
-
-obj-y				+= $(obj-dma-y)
-
-# machine specific support
-
-obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
-obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
-obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
+obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
 obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
+obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
-obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_MACH_SMDK2413)	+= mach-smdk2413.o
-obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
-obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
-obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
+obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
 obj-$(CONFIG_MACH_OTOM)		+= mach-otom.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o
-
-obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
+obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
+obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
+obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
+obj-$(CONFIG_MACH_QT2410)	+= mach-qt2410.o

arch/arm/mach-s3c2410/bast-irq.c

@@ -39,7 +39,7 @@
 #include <asm/arch/bast-map.h>
 #include <asm/arch/bast-irq.h>
 
-#include "irq.h"
+#include <asm/plat-s3c24xx/irq.h>
 
 #if 0
 #include <asm/debug-ll.h>

arch/arm/mach-s3c2410/bast.h

@@ -1,2 +1,2 @@
-
+/* linux/arch/arm/mach-s3c2410/bast.h
 extern void bast_init_irq(void);

arch/arm/mach-s3c2410/clock.c

@@ -1,15 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/clock.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
+ * S3C2410,S3C2440,S3C2442 Clock control support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,418 +26,251 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/platform_device.h>
 #include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
 
 #include <asm/hardware.h>
-#include <asm/irq.h>
 #include <asm/io.h>
 
+#include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "clock.h"
-#include "cpu.h"
-
-/* clock information */
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
-static LIST_HEAD(clocks);
-
-DEFINE_MUTEX(clocks_mutex);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
+int s3c2410_clkcon_enable(struct clk *clk, int enable)
 {
-	return 0;
-}
-
-/* Clock API calls */
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
 
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p;
-	struct clk *clk = ERR_PTR(-ENOENT);
-	int idno;
+	clkcon = __raw_readl(S3C2410_CLKCON);
 
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
+	if (enable)
+		clkcon |= clocks;
 	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, list) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 &&
-		    try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-	/* check for the case where a device was supplied, but the
-	 * clock that was being searched for is not device specific */
-
-	if (IS_ERR(clk)) {
-		list_for_each_entry(p, &clocks, list) {
-			if (p->id == -1 && strcmp(id, p->name) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				break;
-			}
-		}
-	}
+		clkcon &= ~clocks;
 
-	mutex_unlock(&clocks_mutex);
-	return clk;
-}
+	/* ensure none of the special function bits set */
+	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
 
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
+	__raw_writel(clkcon, S3C2410_CLKCON);
 
-int clk_enable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return -EINVAL;
-
-	clk_enable(clk->parent);
-
-	mutex_lock(&clocks_mutex);
-
-	if ((clk->usage++) == 0)
-		(clk->enable)(clk, 1);
-
-	mutex_unlock(&clocks_mutex);
 	return 0;
 }
 
-void clk_disable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return;
-
-	mutex_lock(&clocks_mutex);
-
-	if ((--clk->usage) == 0)
-		(clk->enable)(clk, 0);
-
-	mutex_unlock(&clocks_mutex);
-	clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (IS_ERR(clk))
-		return 0;
-
-	if (clk->rate != 0)
-		return clk->rate;
-
-	if (clk->get_rate != NULL)
-		return (clk->get_rate)(clk);
-
-	if (clk->parent != NULL)
-		return clk_get_rate(clk->parent);
-
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!IS_ERR(clk) && clk->round_rate)
-		return (clk->round_rate)(clk, rate);
-
-	return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = (clk->set_rate)(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
+static int s3c2410_upll_enable(struct clk *clk, int enable)
 {
-	return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = 0;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-
-	if (clk->set_parent)
-		ret = (clk->set_parent)(clk, parent);
-
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-struct clk clk_xtal = {
-	.name		= "xtal",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_mpll = {
-	.name		= "mpll",
-	.id		= -1,
-};
-
-struct clk clk_upll = {
-	.name		= "upll",
-	.id		= -1,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_f = {
-	.name		= "fclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_mpll,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_h = {
-	.name		= "hclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_p = {
-	.name		= "pclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_usb_bus = {
-	.name		= "usb-bus",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_upll,
-};
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+	unsigned long orig = clkslow;
 
 	if (enable)
-		dclkcon |= clk->ctrlbit;
+		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
 	else
-		dclkcon &= ~clk->ctrlbit;
+		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
 
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+	__raw_writel(clkslow, S3C2410_CLKSLOW);
 
-	return 0;
-}
+	/* if we started the UPLL, then allow to settle */
 
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
+		udelay(200);
 
 	return 0;
 }
 
-
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_xtal)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_dclk0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_NAND,
+	}, {
+		.name		= "sdi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_SDI,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_IIC,
+	}, {
+		.name		= "iis",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_IIS,
+	}, {
+		.name		= "spi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_SPI,
 	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable		= s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
 };
 
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_LCDC,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_USBD,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_PWMT,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART2,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= 0,
+	}, {
+		.name		= "usb-bus-host",
+		.id		= -1,
+		.parent		= &clk_usb_bus,
+	}, {
+		.name		= "usb-bus-gadget",
+		.id		= -1,
+		.parent		= &clk_usb_bus,
+	},
 };
 
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_uclk = {
-	.name		= "uclk",
-	.id		= -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
-	clk->owner = THIS_MODULE;
-
-	if (clk->enable == NULL)
-		clk->enable = clk_null_enable;
-
-	/* add to the list of available clocks */
-
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->list, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
-/* initalise all the clocks */
+/* s3c2410_baseclk_add()
+ *
+ * Add all the clocks used by the s3c2410 or compatible CPUs
+ * such as the S3C2440 and S3C2442.
+ *
+ * We cannot use a system device as we are needed before any
+ * of the init-calls that initialise the devices are actually
+ * done.
+*/
 
-int __init s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk)
+int __init s3c2410_baseclk_add(void)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
+	struct clk *clkp;
+	struct clk *xtal;
+	int ret;
+	int ptr;
 
-	/* initialise the main system clocks */
+	clk_upll.enable = s3c2410_upll_enable;
 
-	clk_xtal.rate = xtal;
-	clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+		printk(KERN_ERR "failed to register usb bus clock\n");
 
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
+	/* register clocks from clock array */
 
-	/* assume uart clocks are correctly setup */
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		/* ensure that we note the clock state */
 
-	/* register our clocks */
+		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
 
-	if (s3c24xx_register_clock(&clk_xtal) < 0)
-		printk(KERN_ERR "failed to register master xtal\n");
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
 
-	if (s3c24xx_register_clock(&clk_mpll) < 0)
-		printk(KERN_ERR "failed to register mpll clock\n");
+	/* We must be careful disabling the clocks we are not intending to
+	 * be using at boot time, as subsytems such as the LCD which do
+	 * their own DMA requests to the bus can cause the system to lockup
+	 * if they where in the middle of requesting bus access.
+	 *
+	 * Disabling the LCD clock if the LCD is active is very dangerous,
+	 * and therefore the bootloader should be careful to not enable
+	 * the LCD clock if it is not needed.
+	*/
+
+	/* install (and disable) the clocks we do not need immediately */
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
 
-	if (s3c24xx_register_clock(&clk_upll) < 0)
-		printk(KERN_ERR "failed to register upll clock\n");
+		s3c2410_clkcon_enable(clkp, 0);
+	}
 
-	if (s3c24xx_register_clock(&clk_f) < 0)
-		printk(KERN_ERR "failed to register cpu fclk\n");
+	/* show the clock-slow value */
 
-	if (s3c24xx_register_clock(&clk_h) < 0)
-		printk(KERN_ERR "failed to register cpu hclk\n");
+	xtal = clk_get(NULL, "xtal");
 
-	if (s3c24xx_register_clock(&clk_p) < 0)
-		printk(KERN_ERR "failed to register cpu pclk\n");
+	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+	       print_mhz(clk_get_rate(xtal) /
+			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
 
 	return 0;
 }

arch/arm/mach-s3c2410/dma.c

@@ -1,9 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/dma.c
  *
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 DMA core
+ * S3C2410 DMA selection
  *
  * http://armlinux.simtec.co.uk/
  *
@@ -12,1430 +12,170 @@
  * published by the Free Software Foundation.
 */
 
-
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-#define DEBUG
-#endif
-
-#include <linux/module.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
 #include <linux/sysdev.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
+#include <linux/serial_core.h>
 
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
 #include <asm/dma.h>
-
-#include <asm/mach/dma.h>
-#include <asm/arch/map.h>
-
-#include "dma.h"
-
-/* io map for dma */
-static void __iomem *dma_base;
-static struct kmem_cache *dma_kmem;
-
-struct s3c24xx_dma_selection dma_sel;
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-/* debugging functions */
-
-#define BUF_MAGIC (0xcafebabe)
-
-#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
-
-#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
-
-#if 1
-#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
-#else
-static inline void
-dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
-{
-	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
-	writel(val, dma_regaddr(chan, reg));
-}
-#endif
-
-#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
-
-/* captured register state for debug */
-
-struct s3c2410_dma_regstate {
-	unsigned long         dcsrc;
-	unsigned long         disrc;
-	unsigned long         dstat;
-	unsigned long         dcon;
-	unsigned long         dmsktrig;
+#include <asm/arch/dma.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/dma.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_USB_EP1] = {
+		.name		= "usb-ep1",
+		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP2] = {
+		.name		= "usb-ep2",
+		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP3] = {
+		.name		= "usb-ep3",
+		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP4] = {
+		.name		= "usb-ep4",
+		.channels[3]	=S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+	},
 };
 
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-
-/* dmadbg_showregs
- *
- * simple debug routine to print the current state of the dma registers
-*/
-
-static void
-dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
-{
-	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
-	regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
-	regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
-	regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-}
-
-static void
-dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
-		 struct s3c2410_dma_regstate *regs)
-{
-	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
-	       chan->number, fname, line,
-	       regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
-	       regs->dcon);
-}
-
-static void
-dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-
-	printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
-	       chan->number, fname, line, chan->load_state,
-	       chan->curr, chan->next, chan->end);
-
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-static void
-dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
-#else
-#define dbg_showregs(chan) do { } while(0)
-#define dbg_showchan(chan) do { } while(0)
-#endif /* CONFIG_S3C2410_DMA_DEBUG */
-
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return dma_chan_map[channel];
-}
-
-/* s3c2410_dma_stats_timeout
- *
- * Update DMA stats from timeout info
-*/
-
-static void
-s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
+static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
 {
-	if (stats == NULL)
-		return;
-
-	if (val > stats->timeout_longest)
-		stats->timeout_longest = val;
-	if (val < stats->timeout_shortest)
-		stats->timeout_shortest = val;
-
-	stats->timeout_avg += val;
+	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
 }
 
-/* s3c2410_dma_waitforload
- *
- * wait for the DMA engine to load a buffer, and update the state accordingly
-*/
-
-static int
-s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
-{
-	int timeout = chan->load_timeout;
-	int took;
-
-	if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
-		printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
-		return 0;
-	}
-
-	if (chan->stats != NULL)
-		chan->stats->loads++;
-
-	while (--timeout > 0) {
-		if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
-			took = chan->load_timeout - timeout;
-
-			s3c2410_dma_stats_timeout(chan->stats, took);
-
-			switch (chan->load_state) {
-			case S3C2410_DMALOAD_1LOADED:
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				break;
-
-			default:
-				printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
-			}
-
-			return 1;
-		}
-	}
-
-	if (chan->stats != NULL) {
-		chan->stats->timeout_failed++;
-	}
-
-	return 0;
-}
-
-
-
-/* s3c2410_dma_loadbuffer
- *
- * load a buffer, and update the channel state
-*/
-
-static inline int
-s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
-		       struct s3c2410_dma_buf *buf)
-{
-	unsigned long reload;
-
-	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
-		 buf, (unsigned long)buf->data, buf->size);
-
-	if (buf == NULL) {
-		dmawarn("buffer is NULL\n");
-		return -EINVAL;
-	}
-
-	/* check the state of the channel before we do anything */
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-		dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
-	}
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
-		dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
-	}
-
-	/* it would seem sensible if we are the last buffer to not bother
-	 * with the auto-reload bit, so that the DMA engine will not try
-	 * and load another transfer after this one has finished...
-	 */
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		pr_debug("load_state is none, checking for noreload (next=%p)\n",
-			 buf->next);
-		reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
-	} else {
-		//pr_debug("load_state is %d => autoreload\n", chan->load_state);
-		reload = S3C2410_DCON_AUTORELOAD;
-	}
-
-	if ((buf->data & 0xf0000000) != 0x30000000) {
-		dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
-	}
-
-	writel(buf->data, chan->addr_reg);
-
-	dma_wrreg(chan, S3C2410_DMA_DCON,
-		  chan->dcon | reload | (buf->size/chan->xfer_unit));
-
-	chan->next = buf->next;
-
-	/* update the state of the channel */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_1RUNNING:
-		chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
-		break;
-
-	default:
-		dmawarn("dmaload: unknown state %d in loadbuffer\n",
-			chan->load_state);
-		break;
-	}
-
-	return 0;
-}
-
-/* s3c2410_dma_call_op
- *
- * small routine to call the op routine with the given op if it has been
- * registered
-*/
-
-static void
-s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
-{
-	if (chan->op_fn != NULL) {
-		(chan->op_fn)(chan, op);
-	}
-}
-
-/* s3c2410_dma_buffdone
- *
- * small wrapper to check if callback routine needs to be called, and
- * if so, call it
-*/
-
-static inline void
-s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
-		     enum s3c2410_dma_buffresult result)
-{
-#if 0
-	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
-		 chan->callback_fn, buf, buf->id, buf->size, result);
-#endif
-
-	if (chan->callback_fn != NULL) {
-		(chan->callback_fn)(chan, buf->id, buf->size, result);
-	}
-}
-
-/* s3c2410_dma_start
- *
- * start a dma channel going
-*/
-
-static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
-{
-	unsigned long tmp;
-	unsigned long flags;
-
-	pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
-
-	local_irq_save(flags);
-
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
-		local_irq_restore(flags);
-		return 0;
-	}
-
-	chan->state = S3C2410_DMA_RUNNING;
-
-	/* check wether there is anything to load, and if not, see
-	 * if we can find anything to load
-	 */
-
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		if (chan->next == NULL) {
-			printk(KERN_ERR "dma%d: channel has nothing loaded\n",
-			       chan->number);
-			chan->state = S3C2410_DMA_IDLE;
-			local_irq_restore(flags);
-			return -EINVAL;
-		}
-
-		s3c2410_dma_loadbuffer(chan, chan->next);
-	}
-
-	dbg_showchan(chan);
-
-	/* enable the channel */
-
-	if (!chan->irq_enabled) {
-		enable_irq(chan->irq);
-		chan->irq_enabled = 1;
-	}
-
-	/* start the channel going */
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp &= ~S3C2410_DMASKTRIG_STOP;
-	tmp |= S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-	pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
-
-#if 0
-	/* the dma buffer loads should take care of clearing the AUTO
-	 * reloading feature */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp &= ~S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-/* s3c2410_dma_canload
- *
- * work out if we can queue another buffer into the DMA engine
-*/
-
-static int
-s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
-{
-	if (chan->load_state == S3C2410_DMALOAD_NONE ||
-	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
-		return 1;
-
-	return 0;
-}
-
-/* s3c2410_dma_enqueue
- *
- * queue an given buffer for dma transfer.
- *
- * id         the device driver's id information for this buffer
- * data       the physical address of the buffer data
- * size       the size of the buffer in bytes
- *
- * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
- * is checked, and if set, the channel is started. If this flag isn't set,
- * then an error will be returned.
- *
- * It is possible to queue more than one DMA buffer onto a channel at
- * once, and the code will deal with the re-loading of the next buffer
- * when necessary.
-*/
-
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-	struct s3c2410_dma_buf *buf;
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: id=%p, data=%08x, size=%d\n",
-		 __FUNCTION__, id, (unsigned int)data, size);
-
-	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
-	if (buf == NULL) {
-		pr_debug("%s: out of memory (%ld alloc)\n",
-			 __FUNCTION__, (long)sizeof(*buf));
-		return -ENOMEM;
-	}
-
-	//pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
-	//dbg_showchan(chan);
-
-	buf->next  = NULL;
-	buf->data  = buf->ptr = data;
-	buf->size  = size;
-	buf->id    = id;
-	buf->magic = BUF_MAGIC;
-
-	local_irq_save(flags);
-
-	if (chan->curr == NULL) {
-		/* we've got nothing loaded... */
-		pr_debug("%s: buffer %p queued onto empty channel\n",
-			 __FUNCTION__, buf);
-
-		chan->curr = buf;
-		chan->end  = buf;
-		chan->next = NULL;
-	} else {
-		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
-			 chan->number, __FUNCTION__, buf);
-
-		if (chan->end == NULL)
-			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
-				 chan->number, __FUNCTION__, chan);
-
-		chan->end->next = buf;
-		chan->end = buf;
-	}
-
-	/* if necessary, update the next buffer field */
-	if (chan->next == NULL)
-		chan->next = buf;
-
-	/* check to see if we can load a buffer */
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				printk(KERN_ERR "dma%d: loadbuffer:"
-				       "timeout loading buffer\n",
-				       chan->number);
-				dbg_showchan(chan);
-				local_irq_restore(flags);
-				return -EINVAL;
-			}
-		}
-
-		while (s3c2410_dma_canload(chan) && chan->next != NULL) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	} else if (chan->state == S3C2410_DMA_IDLE) {
-		if (chan->flags & S3C2410_DMAF_AUTOSTART) {
-			s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
-		}
-	}
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-static inline void
-s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
-{
-	int magicok = (buf->magic == BUF_MAGIC);
-
-	buf->magic = -1;
-
-	if (magicok) {
-		kmem_cache_free(dma_kmem, buf);
-	} else {
-		printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
-	}
-}
-
-/* s3c2410_dma_lastxfer
- *
- * called when the system is out of buffers, to ensure that the channel
- * is prepared for shutdown.
-*/
-
-static inline void
-s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
-{
-#if 0
-	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
-		 chan->number, chan->load_state);
-#endif
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-			       chan->number, __FUNCTION__);
-			return;
-		}
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* I belive in this case we do not have anything to do
-		 * until the next buffer comes along, and we turn off the
-		 * reload */
-		return;
-
-	default:
-		pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
-			 chan->number, chan->load_state);
-		return;
-
-	}
-
-	/* hopefully this'll shut the damned thing up after the transfer... */
-	dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
-}
-
-
-#define dmadbg2(x...)
-
-static irqreturn_t
-s3c2410_dma_irq(int irq, void *devpw)
-{
-	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
-	struct s3c2410_dma_buf  *buf;
-
-	buf = chan->curr;
-
-	dbg_showchan(chan);
-
-	/* modify the channel state */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_1RUNNING:
-		/* TODO - if we are running only one buffer, we probably
-		 * want to reload here, and then worry about the buffer
-		 * callback */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		/* iirc, we should go back to NONE loaded here, we
-		 * had a buffer, and it was never verified as being
-		 * loaded.
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* we'll worry about checking to see if another buffer is
-		 * ready after we've called back the owner. This should
-		 * ensure we do not wait around too long for the DMA
-		 * engine to start the next transfer
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_NONE:
-		printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
-		       chan->number);
-		break;
-
-	default:
-		printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
-		       chan->number, chan->load_state);
-		break;
-	}
-
-	if (buf != NULL) {
-		/* update the chain to make sure that if we load any more
-		 * buffers when we call the callback function, things should
-		 * work properly */
-
-		chan->curr = buf->next;
-		buf->next  = NULL;
-
-		if (buf->magic != BUF_MAGIC) {
-			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
-			       chan->number, __FUNCTION__, buf);
-			return IRQ_HANDLED;
-		}
-
-		s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
-
-		/* free resouces */
-		s3c2410_dma_freebuf(buf);
-	} else {
-	}
-
-	/* only reload if the channel is still running... our buffer done
-	 * routine may have altered the state by requesting the dma channel
-	 * to stop or shutdown... */
-
-	/* todo: check that when the channel is shut-down from inside this
-	 * function, we cope with unsetting reload, etc */
-
-	if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
-		unsigned long flags;
-
-		switch (chan->load_state) {
-		case S3C2410_DMALOAD_1RUNNING:
-			/* don't need to do anything for this state */
-			break;
-
-		case S3C2410_DMALOAD_NONE:
-			/* can load buffer immediately */
-			break;
-
-		case S3C2410_DMALOAD_1LOADED:
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-				       chan->number, __FUNCTION__);
-				return IRQ_HANDLED;
-			}
-
-			break;
-
-		case S3C2410_DMALOAD_1LOADED_1RUNNING:
-			goto no_load;
-
-		default:
-			printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
-			       chan->number, chan->load_state);
-			return IRQ_HANDLED;
-		}
-
-		local_irq_save(flags);
-		s3c2410_dma_loadbuffer(chan, chan->next);
-		local_irq_restore(flags);
-	} else {
-		s3c2410_dma_lastxfer(chan);
-
-		/* see if we can stop this channel.. */
-		if (chan->load_state == S3C2410_DMALOAD_NONE) {
-			pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
-				 chan->number, jiffies);
-			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
-					 S3C2410_DMAOP_STOP);
-		}
-	}
-
- no_load:
-	return IRQ_HANDLED;
-}
-
-static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(unsigned int channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-	int err;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c2410_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-
-	if (!chan->irq_claimed) {
-		pr_debug("dma%d: %s : requesting irq %d\n",
-			 channel, __FUNCTION__, chan->irq);
-
-		chan->irq_claimed = 1;
-		local_irq_restore(flags);
-
-		err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
-				  client->name, (void *)chan);
-
-		local_irq_save(flags);
-
-		if (err) {
-			chan->in_use = 0;
-			chan->irq_claimed = 0;
-			local_irq_restore(flags);
-
-			printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
-			       client->name, chan->irq, chan->number);
-			return err;
-		}
-
-		chan->irq_enabled = 1;
-	}
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
+static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
+	.select		= s3c2410_dma_select,
+	.dcon_mask	= 7 << 24,
+	.map		= s3c2410_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2410_dma_mappings),
+};
 
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
+static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
+	.channels	= {
+		[DMACH_SDI]	= {
+			.list	= {
+				[0]	= 3 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+				[2]	= 0 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_I2S_IN]	= {
+			.list	= {
+				[0]	= 1 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+			},
+		},
+	},
+};
 
-int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+static int s3c2410_dma_add(struct sys_device *sysdev)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: need to stop dma channel %p\n",
-		       __FUNCTION__, chan);
-
-		/* possibly flush the channel */
-		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
-	}
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (chan->irq_claimed)
-		free_irq(chan->irq, (void *)chan);
-
-	chan->irq_claimed = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
+	s3c2410_dma_init();
+	s3c24xx_dma_order_set(&s3c2410_dma_order);
+	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
 }
 
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-	unsigned long tmp;
-
-	pr_debug("%s:\n", __FUNCTION__);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	s3c2410_dma_call_op(chan,  S3C2410_DMAOP_STOP);
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp |= S3C2410_DMASKTRIG_STOP;
-	//tmp &= ~S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp |= S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	/* should stop do this, or should we wait for flush? */
-	chan->state      = S3C2410_DMA_IDLE;
-	chan->load_state = S3C2410_DMALOAD_NONE;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
 
-void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
+static int __init s3c2410_dma_drvinit(void)
 {
-	unsigned long tmp;
-	unsigned int timeout = 0x10000;
-
-	while (timeout-- > 0) {
-		tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-
-		if (!(tmp & S3C2410_DMASKTRIG_ON))
-			return;
-	}
-
-	pr_debug("dma%d: failed to stop?\n", chan->number);
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
 }
 
-
-/* s3c2410_dma_flush
- *
- * stop the channel, and remove all current and pending transfers
-*/
-
-static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_buf *buf, *next;
-	unsigned long flags;
-
-	pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: stopping channel...\n", __FUNCTION__ );
-		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
-	}
-
-	buf = chan->curr;
-	if (buf == NULL)
-		buf = chan->next;
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	if (buf != NULL) {
-		for ( ; buf != NULL; buf = next) {
-			next = buf->next;
-
-			pr_debug("%s: free buffer %p, next %p\n",
-			       __FUNCTION__, buf, buf->next);
-
-			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
-			s3c2410_dma_freebuf(buf);
-		}
-	}
-
-	dbg_showregs(chan);
-
-	s3c2410_dma_waitforstop(chan);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	{
-		unsigned long tmp;
-
-		tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-		tmp |= S3C2410_DCON_NORELOAD;
-		dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-	}
+arch_initcall(s3c2410_dma_drvinit);
 #endif
 
-	dbg_showregs(chan);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-int
-s3c2410_dma_started(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-
-}
-
-int
-s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c2410_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c2410_dma_dostop(chan);
-
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-		return -ENOENT;
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c2410_dma_flush(chan);
-
-	case S3C2410_DMAOP_STARTED:
-		return s3c2410_dma_started(chan);
-
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-
-	}
-
-	return -ENOENT;      /* unknown, don't bother */
-}
-
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* DMA configuration for each channel
- *
- * DISRCC -> source of the DMA (AHB,APB)
- * DISRC  -> source address of the DMA
- * DIDSTC -> destination of the DMA (AHB,APD)
- * DIDST  -> destination address of the DMA
-*/
-
-/* s3c2410_dma_config
- *
- * xfersize:     size of unit in bytes (1,2,4)
- * dcon:         base value of the DCONx register
-*/
-
-int s3c2410_dma_config(dmach_t channel,
-		       int xferunit,
-		       int dcon)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
-		 __FUNCTION__, channel, xferunit, dcon);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
-
-	dcon |= chan->dcon & dma_sel.dcon_mask;
-
-	pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
-
-	switch (xferunit) {
-	case 1:
-		dcon |= S3C2410_DCON_BYTE;
-		break;
-
-	case 2:
-		dcon |= S3C2410_DCON_HALFWORD;
-		break;
-
-	case 4:
-		dcon |= S3C2410_DCON_WORD;
-		break;
-
-	default:
-		pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
-		return -EINVAL;
-	}
-
-	dcon |= S3C2410_DCON_HWTRIG;
-	dcon |= S3C2410_DCON_INTREQ;
-
-	pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
-
-	chan->dcon = dcon;
-	chan->xfer_unit = xferunit;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
-
-	chan->flags = flags;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-/* s3c2410_dma_devconfig
- *
- * configure the dma source/destination hardware type and address
- *
- * source:    S3C2410_DMASRC_HW: source is hardware
- *            S3C2410_DMASRC_MEM: source is memory
- *
- * hwcfg:     the value for xxxSTCn register,
- *            bit 0: 0=increment pointer, 1=leave pointer
- *            bit 1: 0=soucre is AHB, 1=soucre is APB
- *
- * devaddr:   physical address of the source
-*/
-
-int s3c2410_dma_devconfig(int channel,
-			  enum s3c2410_dmasrc source,
-			  int hwcfg,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __FUNCTION__, (int)source, hwcfg, devaddr);
-
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	switch (source) {
-	case S3C2410_DMASRC_HW:
-		/* source is hardware */
-		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
-			 __FUNCTION__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
-		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
-		return 0;
-
-	case S3C2410_DMASRC_MEM:
-		/* source is memory */
-		pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
-			  __FUNCTION__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
-		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
-		return 0;
-	}
-
-	printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-/* s3c2410_dma_getposition
- *
- * returns the current transfer points for the dma source and destination
-*/
-
-int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
-{
- 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	if (src != NULL)
- 		*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-
- 	if (dst != NULL)
- 		*dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
-
- 	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-
-/* system device class */
-
-#ifdef CONFIG_PM
-
-static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
-
-	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
-
-	if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
-		/* the dma channel is still working, which is probably
-		 * a bad thing to do over suspend/resume. We stop the
-		 * channel and assume that the client is either going to
-		 * retry after resume, or that it is broken.
-		 */
-
-		printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
-		       cp->number);
-
-		s3c2410_dma_dostop(cp);
-	}
-
-	return 0;
-}
-
-static int s3c2410_dma_resume(struct sys_device *dev)
-{
-	return 0;
-}
-
-#else
-#define s3c2410_dma_suspend NULL
-#define s3c2410_dma_resume  NULL
-#endif /* CONFIG_PM */
-
-struct sysdev_class dma_sysclass = {
-	set_kset_name("s3c24xx-dma"),
-	.suspend	= s3c2410_dma_suspend,
-	.resume		= s3c2410_dma_resume,
+#if defined(CONFIG_CPU_S3C2442)
+/* S3C2442 DMA contains the same selection table as the S3C2410 */
+static struct sysdev_driver s3c2442_dma_driver = {
+	.add	= s3c2410_dma_add,
 };
 
-/* kmem cache implementation */
-
-static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
-{
-	memset(p, 0, sizeof(struct s3c2410_dma_buf));
-}
-
-/* initialisation code */
-
-static int __init s3c2410_init_dma(void)
-{
-	struct s3c2410_dma_chan *cp;
-	int channel;
-	int ret;
-
-	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
-
-	dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
-	if (dma_base == NULL) {
-		printk(KERN_ERR "dma failed to remap register block\n");
-		return -ENOMEM;
-	}
-
-	printk("Registering sysclass\n");
-
-	ret = sysdev_class_register(&dma_sysclass);
-	if (ret != 0) {
-		printk(KERN_ERR "dma sysclass registration failed\n");
-		goto err;
-	}
-
-	dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
-				     SLAB_HWCACHE_ALIGN,
-				     s3c2410_dma_cache_ctor, NULL);
-
-	if (dma_kmem == NULL) {
-		printk(KERN_ERR "dma failed to make kmem cache\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
-		cp = &s3c2410_chans[channel];
-
-		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
-
-		/* dma channel irqs are in order.. */
-		cp->number = channel;
-		cp->irq    = channel + IRQ_DMA0;
-		cp->regs   = dma_base + (channel*0x40);
-
-		/* point current stats somewhere */
-		cp->stats  = &cp->stats_store;
-		cp->stats_store.timeout_shortest = LONG_MAX;
-
-		/* basic channel configuration */
-
-		cp->load_timeout = 1<<18;
-
-		/* register system device */
-
-		cp->dev.cls = &dma_sysclass;
-		cp->dev.id  = channel;
-		ret = sysdev_register(&cp->dev);
-
-		printk("DMA channel %d at %p, irq %d\n",
-		       cp->number, cp->regs, cp->irq);
-	}
-
-	return 0;
-
- err:
-	kmem_cache_destroy(dma_kmem);
-	iounmap(dma_base);
-	dma_base = NULL;
-	return ret;
-}
-
-core_initcall(s3c2410_init_dma);
-
-static inline int is_channel_valid(unsigned int channel)
+static int __init s3c2442_dma_drvinit(void)
 {
-	return (channel & DMA_CH_VALID);
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
 }
 
-/* s3c2410_dma_map_channel()
- *
- * turn the virtual channel number into a real, and un-used hardware
- * channel.
- *
- * currently this code uses first-free channel from the specified harware
- * map, not taking into account anything that the board setup code may
- * have to say about the likely peripheral set to be in use.
-*/
-
-struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
-{
-	struct s3c24xx_dma_map *ch_map;
-	struct s3c2410_dma_chan *dmach;
-	int ch;
-
-	if (dma_sel.map == NULL || channel > dma_sel.map_size)
-		return NULL;
-
-	ch_map = dma_sel.map + channel;
-
-	for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
-		if (!is_channel_valid(ch_map->channels[ch]))
-			continue;
-
-		if (s3c2410_chans[ch].in_use == 0) {
-			printk("mapped channel %d to %d\n", channel, ch);
-			break;
-		}
-	}
-
-	if (ch >= S3C2410_DMA_CHANNELS)
-		return NULL;
-
-	/* update our channel mapping */
-
-	dmach = &s3c2410_chans[ch];
-	dma_chan_map[channel] = dmach;
-
-	/* select the channel */
-
-	(dma_sel.select)(dmach, ch_map);
-
-	return dmach;
-}
-
-static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch)
-{
-	/* show the channel configuration */
-
-	printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name,
-	       (is_channel_valid(map->channels[0]) ? '0' : '-'),
-	       (is_channel_valid(map->channels[1]) ? '1' : '-'),
-	       (is_channel_valid(map->channels[2]) ? '2' : '-'),
-	       (is_channel_valid(map->channels[3]) ? '3' : '-'));
-}
-
-static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
-{
-	if (1)
-		s3c24xx_dma_show_ch(map, ch);
-
-	return 0;
-}
-
-int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
-{
-	struct s3c24xx_dma_map *nmap;
-	size_t map_sz = sizeof(*nmap) * sel->map_size;
-	int ptr;
-
-	nmap = kmalloc(map_sz, GFP_KERNEL);
-	if (nmap == NULL)
-		return -ENOMEM;
-
-	memcpy(nmap, sel->map, map_sz);
-	memcpy(&dma_sel, sel, sizeof(*sel));
-
-	dma_sel.map = nmap;
-
-	for (ptr = 0; ptr < sel->map_size; ptr++)
-		s3c24xx_dma_check_entry(nmap+ptr, ptr);
+arch_initcall(s3c2442_dma_drvinit);
+#endif
 
-	return 0;
-}

arch/arm/mach-s3c2410/gpio.c

@@ -1,9 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/gpio.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX GPIO support
+ * S3C2410 GPIO support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,8 +18,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
+ */
 
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -33,156 +32,40 @@
 
 #include <asm/arch/regs-gpio.h>
 
-void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long mask;
-	unsigned long con;
-	unsigned long flags;
-
-	if (pin < S3C2410_GPIO_BANKB) {
-		mask = 1 << S3C2410_GPIO_OFFSET(pin);
-	} else {
-		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
-	}
-
-	switch (function) {
-	case S3C2410_GPIO_LEAVE:
-		mask = 0;
-		function = 0;
-		break;
-
-	case S3C2410_GPIO_INPUT:
-	case S3C2410_GPIO_OUTPUT:
-	case S3C2410_GPIO_SFN2:
-	case S3C2410_GPIO_SFN3:
-		if (pin < S3C2410_GPIO_BANKB) {
-			function -= 1;
-			function &= 1;
-			function <<= S3C2410_GPIO_OFFSET(pin);
-		} else {
-			function &= 3;
-			function <<= S3C2410_GPIO_OFFSET(pin)*2;
-		}
-	}
-
-	/* modify the specified register wwith IRQs off */
-
-	local_irq_save(flags);
-
-	con  = __raw_readl(base + 0x00);
-	con &= ~mask;
-	con |= function;
-
-	__raw_writel(con, base + 0x00);
-
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
-
-unsigned int s3c2410_gpio_getcfg(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long val = __raw_readl(base);
-
-	if (pin < S3C2410_GPIO_BANKB) {
-		val >>= S3C2410_GPIO_OFFSET(pin);
-		val &= 1;
-		val += 1;
-	} else {
-		val >>= S3C2410_GPIO_OFFSET(pin)*2;
-		val &= 3;
-	}
-
-	return val | S3C2410_GPIO_INPUT;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getcfg);
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+			   unsigned int config)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	void __iomem *reg = S3C24XX_EINFLT0;
 	unsigned long flags;
-	unsigned long up;
-
-	if (pin < S3C2410_GPIO_BANKB)
-		return;
-
-	local_irq_save(flags);
-
-	up = __raw_readl(base + 0x08);
-	up &= ~(1L << offs);
-	up |= to << offs;
-	__raw_writel(up, base + 0x08);
+	unsigned long val;
 
-	local_irq_restore(flags);
-}
+	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
+		return -1;
 
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
+	config &= 0xff;
 
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-	unsigned long flags;
-	unsigned long dat;
+	pin -= S3C2410_GPG8;
+	reg += pin & ~3;
 
 	local_irq_save(flags);
 
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offs);
-	dat |= to << offs;
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	/* update filter width and clock source */
 
-	return __raw_readl(base + 0x04) & (1<< offs);
-}
+	val = __raw_readl(reg);
+	val &= ~(0xff << ((pin & 3) * 8));
+	val |= config << ((pin & 3) * 8);
+	__raw_writel(val, reg);
 
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
+	/* update filter enable */
 
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
+	val = __raw_readl(S3C24XX_EXTINT2);
+	val &= ~(1 << ((pin * 4) + 3));
+	val |= on << ((pin * 4) + 3);
+	__raw_writel(val, S3C24XX_EXTINT2);
 
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
 	local_irq_restore(flags);
 
-	return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
-
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
-
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
-
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
-
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+	return 0;
 }
 
-EXPORT_SYMBOL(s3c2410_gpio_getirq);
+EXPORT_SYMBOL(s3c2410_gpio_irqfilter);

arch/arm/mach-s3c2410/irq.c

@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -17,37 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
- * Changelog:
- *
- *   22-Jul-2004  Ben Dooks <ben@simtec.co.uk>
- *                Fixed compile warnings
- *
- *   22-Jul-2004  Roc Wu <cooloney@yahoo.com.cn>
- *                Fixed s3c_extirq_type
- *
- *   21-Jul-2004  Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
- *                Addition of ADC/TC demux
- *
- *   04-Oct-2004  Klaus Fetscher <k.fetscher@fetron.de>
- *		  Fix for set_irq_type() on low EINT numbers
- *
- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
- *		  Tidy up KF's patch and sort out new release
- *
- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
- *		  Add support for power management controls
- *
- *   04-Nov-2004  Ben Dooks
- *		  Fix standard IRQ wake for EINT0..4 and RTC
- *
- *   22-Feb-2005  Ben Dooks
- *		  Fixed edge-triggering on ADC IRQ
- *
- *   28-Jun-2005  Ben Dooks
- *		  Mark IRQ_LCD valid
- *
- *   25-Jul-2005  Ben Dooks
- *		  Split the S3C2440 IRQ code to seperate file
 */
 
 #include <linux/init.h>
@@ -57,745 +26,23 @@
 #include <linux/ptrace.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
-
-/* wakeup irq control */
-
-#ifdef CONFIG_PM
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_intmask	= 0xffffffffL;
-unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
-unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
-
-int
-s3c_irq_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
-
-	if (!(s3c_irqwake_intallow & irqbit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_intmask |= irqbit;
-	else
-		s3c_irqwake_intmask &= ~irqbit;
-
-	return 0;
-}
-
-static int
-s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long bit = 1L << (irqno - EXTINT_OFF);
-
-	if (!(s3c_irqwake_eintallow & bit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_eintmask |= bit;
-	else
-		s3c_irqwake_eintmask &= ~bit;
-
-	return 0;
-}
-
-#else
-#define s3c_irqext_wake NULL
-#define s3c_irq_wake NULL
-#endif
-
-
-static void
-s3c_irq_mask(unsigned int irqno)
-{
-	unsigned long mask;
-
-	irqno -= IRQ_EINT0;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask |= 1UL << irqno;
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask|bitval, S3C2410_INTMSK);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(unsigned int irqno)
-{
-	unsigned long mask;
-
-	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
-		irqdbf2("s3c_irq_unmask %d\n", irqno);
-
-	irqno -= IRQ_EINT0;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask &= ~(1UL << irqno);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.ack		= s3c_irq_maskack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.ack		= s3c_irq_ack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(unsigned int irqno)
-{
-	unsigned long mask;
-
-	irqno -= EXTINT_OFF;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask |= ( 1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-static void
-s3c_irqext_ack(unsigned int irqno)
-{
-	unsigned long req;
-	unsigned long bit;
-	unsigned long mask;
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
-	bit = 1UL << (irqno - EXTINT_OFF);
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-
-	__raw_writel(bit, S3C24XX_EINTPEND);
-
-	req = __raw_readl(S3C24XX_EINTPEND);
-	req &= ~mask;
-
-	/* not sure if we should be acking the parent irq... */
-
-	if (irqno <= IRQ_EINT7 ) {
-		if ((req & 0xf0) == 0)
-			s3c_irq_ack(IRQ_EINT4t7);
-	} else {
-		if ((req >> 8) == 0)
-			s3c_irq_ack(IRQ_EINT8t23);
-	}
-}
-
-static void
-s3c_irqext_unmask(unsigned int irqno)
+static int s3c2410_irq_add(struct sys_device *sysdev)
 {
-	unsigned long mask;
-
-	irqno -= EXTINT_OFF;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask &= ~( 1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(unsigned int irq, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-	unsigned long newvalue = 0, value;
-
-	if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
-	{
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (irq - IRQ_EINT0) * 2;
-		extint_offset = (irq - IRQ_EINT0) * 4;
-	}
-	else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
-	{
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (irq - (EXTINT_OFF)) * 2;
-		extint_offset = (irq - (EXTINT_OFF)) * 4;
-	}
-	else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
-	{
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (irq - IRQ_EINT8) * 2;
-		extint_offset = (irq - IRQ_EINT8) * 4;
-	}
-	else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
-	{
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (irq - IRQ_EINT8) * 2;
-		extint_offset = (irq - IRQ_EINT16) * 4;
-	} else
-		return -1;
-
-	/* Set the GPIO to external interrupt mode */
-	value = __raw_readl(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	__raw_writel(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQT_NOEDGE:
-			printk(KERN_WARNING "No edge setting!\n");
-			break;
-
-		case IRQT_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQT_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQT_BOTHEDGE:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQT_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQT_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			printk(KERN_ERR "No such irq type %d", type);
-			return -1;
-	}
-
-	value = __raw_readl(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	__raw_writel(value, extint_reg);
-
 	return 0;
 }
 
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.mask		= s3c_irqext_mask,
-	.unmask		= s3c_irqext_unmask,
-	.ack		= s3c_irqext_ack,
-	.set_type	= s3c_irqext_type,
-	.set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.ack		= s3c_irq_ack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake,
-	.set_type	= s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0	 (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1	 (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
-	.name		= "s3c-uart0",
-	.mask		= s3c_irq_uart0_mask,
-	.unmask		= s3c_irq_uart0_unmask,
-	.ack		= s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
-	.name		= "s3c-uart1",
-	.mask		= s3c_irq_uart1_mask,
-	.unmask		= s3c_irq_uart1_unmask,
-	.ack		= s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
-	.name		= "s3c-uart2",
-	.mask		= s3c_irq_uart2_mask,
-	.unmask		= s3c_irq_uart2_unmask,
-	.ack		= s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(unsigned int irqno)
-{
-	s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
-	.name		= "s3c-adc",
-	.mask		= s3c_irq_adc_mask,
-	.unmask		= s3c_irq_adc_unmask,
-	.ack		= s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
-			      struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = 9;
-	struct irq_desc *mydesc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_TC;
-			desc_handle_irq(IRQ_TC, mydesc);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_ADC;
-			desc_handle_irq(IRQ_ADC, mydesc);
-		}
-	}
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = start - IRQ_S3CUART_RX0;
-	struct irq_desc *desc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
-		start, offset, subsrc, submsk);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 7;
-
-	if (subsrc != 0) {
-		desc = irq_desc + start;
-
-		if (subsrc & 1)
-			desc_handle_irq(start, desc);
-
-		desc++;
-
-		if (subsrc & 2)
-			desc_handle_irq(start+1, desc);
-
-		desc++;
-
-		if (subsrc & 4)
-			desc_handle_irq(start+2, desc);
-	}
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
-		      struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= ~0xff;	/* ignore lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-		desc_handle_irq(irq, irq_desc + irq);
-	}
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
-			struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= 0xff;	/* only lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-
-		desc_handle_irq(irq, irq_desc + irq);
-	}
-}
-
-#ifdef CONFIG_PM
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2410_INTMSK),
-	SAVE_ITEM(S3C2410_INTSUBMSK),
+static struct sysdev_driver s3c2410_irq_driver = {
+	.add		= s3c2410_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
 };
 
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+static int s3c2410_irq_init(void)
 {
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
-	s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
-	return 0;
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
-int s3c24xx_irq_resume(struct sys_device *dev)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
-	s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
-	return 0;
-}
-
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
-	unsigned long pend;
-	unsigned long last;
-	int irqno;
-	int i;
-
-	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
-	/* first, clear all interrupts pending... */
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C24XX_EINTPEND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C24XX_EINTPEND);
-		printk("irq: clearing pending ext status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_INTPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C2410_SRCPND);
-		__raw_writel(pend, S3C2410_INTPND);
-		printk("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_SUBSRCPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		printk("irq: clearing subpending status %08x\n", (int)pend);
-		__raw_writel(pend, S3C2410_SUBSRCPND);
-		last = pend;
-	}
-
-	/* register the main interrupts */
-
-	irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
-	for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
-		/* set all the s3c2410 internal irqs */
-
-		switch (irqno) {
-			/* deal with the special IRQs (cascaded) */
-
-		case IRQ_EINT4t7:
-		case IRQ_EINT8t23:
-		case IRQ_UART0:
-		case IRQ_UART1:
-		case IRQ_UART2:
-		case IRQ_ADCPARENT:
-			set_irq_chip(irqno, &s3c_irq_level_chip);
-			set_irq_handler(irqno, handle_level_irq);
-			break;
-
-		case IRQ_RESERVED6:
-		case IRQ_RESERVED24:
-			/* no IRQ here */
-			break;
-
-		default:
-			//irqdbf("registering irq %d (s3c irq)\n", irqno);
-			set_irq_chip(irqno, &s3c_irq_chip);
-			set_irq_handler(irqno, handle_edge_irq);
-			set_irq_flags(irqno, IRQF_VALID);
-		}
-	}
-
-	/* setup the cascade irq handlers */
-
-	set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
-	set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
-	set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
-	set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
-	set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
-	set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
-	/* external interrupts */
-
-	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
-		irqdbf("registering irq %d (ext int)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_eint0t4);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
-		irqdbf("registering irq %d (extended s3c irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irqext_chip);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	/* register the uart interrupts */
-
-	irqdbf("s3c2410: registering external interrupts\n");
-
-	for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
-		irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_uart0);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
-		irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_uart1);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
-		irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_uart2);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
-		irqdbf("registering irq %d (s3c adc irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_adc);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	irqdbf("s3c2410: registered interrupt handlers\n");
-}
+arch_initcall(s3c2410_irq_init);

arch/arm/mach-s3c2410/mach-amlm5900.c

@@ -1,4 +1,4 @@
-/***********************************************************************
+/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c
  *
  * linux/arch/arm/mach-s3c2410/mach-amlm5900.c
  *
@@ -35,7 +35,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
-
+#include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -52,8 +52,8 @@
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
@@ -113,12 +113,6 @@ static struct platform_device amlm5900_device_nor = {
 #endif
 
 static struct map_desc amlm5900_iodesc[] __initdata = {
-	{
-		.virtual	= (u32)S3C24XX_VA_SPI,
-		.pfn		= __phys_to_pfn(S3C2410_PA_SPI),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
 };
 
 #define UCON S3C2410_UCON_DEFAULT

arch/arm/mach-s3c2410/mach-bast.c

@@ -50,9 +50,9 @@
 
 #include <linux/serial_8250.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 #include "usb-simtec.h"
 
 #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"