Merge branch 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

* 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm/dts: Add support for TI OMAP3 EVM board
  arm/dts: OMAP4: Update DTS file with new GIC bindings
  arm/dts: OMAP3: Add i2c controller nodes
  arm/dts: OMAP4: Add i2c controller nodes
  ARM: OMAP2+: Set Kconfig dependencies for PROC_DEVICETREE
  arm/dts: OMAP3&4: Remove the '0x' prefix for serial nodes
  ARM: OMAP1: kconfig: Enable IRQ_DOMAIN by default for OMAP1 platforms
  ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT
  ARM: OMAP2+: omap_device: Replace dev_warn by dev_dbg in omap_device_build_from_dt
  ARM: OMAP2+: board-generic: Remove un-needed .atag_offset for DT_MACHINE
  ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
  arm/dts: OMAP: Remove bootargs node from board files

arch/arm/boot/dts/omap3-beagle.dts

@@ -13,15 +13,6 @@
 	model = "TI OMAP3 BeagleBoard";
 	compatible = "ti,omap3-beagle", "ti,omap3";
 
-	/*
-	 * Since the initial device tree board file does not create any
-	 * devices (MMC, network...), the only way to boot is to provide a
-	 * ramdisk.
-	 */
-	chosen {
-		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */

arch/arm/boot/dts/omap3-evm.dts

@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
+	compatible = "ti,omap3-evm", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+};

arch/arm/boot/dts/omap3.dtsi

@@ -67,28 +67,49 @@
 			#interrupt-cells = <1>;
 		};
 
-		uart1: serial@0x4806a000 {
+		uart1: serial@4806a000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
-		uart2: serial@0x4806c000 {
+		uart2: serial@4806c000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
-		uart3: serial@0x49020000 {
+		uart3: serial@49020000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
-		uart4: serial@0x49042000 {
+		uart4: serial@49042000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap3-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap3-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap3-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
 	};
 };

arch/arm/boot/dts/omap4-panda.dts

@@ -13,15 +13,6 @@
 	model = "TI OMAP4 PandaBoard";
 	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
 
-	/*
-	 * Since the initial device tree board file does not create any
-	 * devices (MMC, network...), the only way to boot is to provide a
-	 * ramdisk.
-	 */
-	chosen {
-		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */

arch/arm/boot/dts/omap4-sdp.dts

@@ -13,15 +13,6 @@
 	model = "TI OMAP4 SDP board";
 	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
 
-	/*
-	 * Since the initial device tree board file does not create any
-	 * devices (MMC, network...), the only way to boot is to provide a
-	 * ramdisk.
-	 */
-	chosen {
-		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */

arch/arm/boot/dts/omap4.dtsi

@@ -99,33 +99,61 @@
 		gic: interrupt-controller@48241000 {
 			compatible = "arm,cortex-a9-gic";
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <3>;
 			reg = <0x48241000 0x1000>,
 			      <0x48240100 0x0100>;
 		};
 
-		uart1: serial@0x4806a000 {
+		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
-		uart2: serial@0x4806c000 {
+		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
-		uart3: serial@0x48020000 {
+		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
-		uart4: serial@0x4806e000 {
+		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
+
+		i2c4: i2c@48350000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+		};
 	};
 };

arch/arm/mach-omap2/Kconfig

@@ -117,7 +117,6 @@ comment "OMAP Board Type"
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP2+ board"
 	depends on ARCH_OMAP2PLUS
-	select USE_OF
 	default y
 	help
 	  Support for generic TI OMAP2+ boards using Flattened Device Tree.

arch/arm/mach-omap2/board-generic.c

@@ -91,14 +91,13 @@ static void __init omap3_init(void)
 }
 #endif
 
-#if defined(CONFIG_SOC_OMAP2420)
+#ifdef CONFIG_SOC_OMAP2420
 static const char *omap242x_boards_compat[] __initdata = {
 	"ti,omap2420",
 	NULL,
 };
 
 DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
-	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
@@ -111,14 +110,13 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 MACHINE_END
 #endif
 
-#if defined(CONFIG_SOC_OMAP2430)
+#ifdef CONFIG_SOC_OMAP2430
 static const char *omap243x_boards_compat[] __initdata = {
 	"ti,omap2430",
 	NULL,
 };
 
 DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
-	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
@@ -131,14 +129,13 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
 MACHINE_END
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
+#ifdef CONFIG_ARCH_OMAP3
 static const char *omap3_boards_compat[] __initdata = {
 	"ti,omap3",
 	NULL,
 };
 
 DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
-	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
@@ -151,14 +148,13 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 MACHINE_END
 #endif
 
-#if defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP4
 static const char *omap4_boards_compat[] __initdata = {
 	"ti,omap4",
 	NULL,
 };
 
 DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
-	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,

arch/arm/mach-omap2/pm.c

@@ -227,6 +227,14 @@ postcore_initcall(omap2_common_pm_init);
 
 static int __init omap2_common_pm_late_init(void)
 {
+	/*
+	 * In the case of DT, the PMIC and SR initialization will be done using
+	 * a completely different mechanism.
+	 * Disable this part if a DT blob is available.
+	 */
+	if (of_have_populated_dt())
+		return 0;
+
 	/* Init the voltage layer */
 	omap_pmic_late_init();
 	omap_voltage_late_init();

arch/arm/plat-omap/Kconfig

@@ -14,6 +14,7 @@ config ARCH_OMAP1
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
 	select HAVE_IDE
 	select NEED_MACH_MEMORY_H
 	help
@@ -24,6 +25,8 @@ config ARCH_OMAP2PLUS
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
 	select OMAP_DM_TIMER
+	select USE_OF
+	select PROC_DEVICETREE if PROC_FS
 	help
 	  "Systems based on OMAP2, OMAP3 or OMAP4"
 

arch/arm/plat-omap/omap_device.c

@@ -348,7 +348,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 
 	oh_cnt = of_property_count_strings(node, "ti,hwmods");
 	if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
-		dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n");
+		dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
 		return -ENODEV;
 	}