Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

CREDITS

@@ -3643,11 +3643,9 @@ S: Cambridge. CB1 7EG
 S: England
 
 N: Chris Wright
-E: chrisw@osdl.org
+E: chrisw@sous-sol.org
 D: hacking on LSM framework and security modules.
-S: c/o OSDL
-S: 12725 SW Millikan Way, Suite 400
-S: Beaverton, OR 97005
+S: Portland, OR
 S: USA
 
 N: Michal Wronski

Documentation/cpu-hotplug.txt

@@ -11,6 +11,8 @@
 			Joel Schopp <jschopp@austin.ibm.com>
 		ia64/x86_64:
 			Ashok Raj <ashok.raj@intel.com>
+		s390:
+			Heiko Carstens <heiko.carstens@de.ibm.com>
 
 Authors: Ashok Raj <ashok.raj@intel.com>
 Lots of feedback: Nathan Lynch <nathanl@austin.ibm.com>,
@@ -44,9 +46,28 @@ maxcpus=n    Restrict boot time cpus to n. Say if you have 4 cpus, using
              maxcpus=2 will only boot 2. You can choose to bring the
              other cpus later online, read FAQ's for more info.
 
-additional_cpus=n	[x86_64 only] use this to limit hotpluggable cpus.
-                        This option sets
-			cpu_possible_map = cpu_present_map + additional_cpus
+additional_cpus*=n	Use this to limit hotpluggable cpus. This option sets
+  			cpu_possible_map = cpu_present_map + additional_cpus
+
+(*) Option valid only for following architectures
+- x86_64, ia64, s390
+
+ia64 and x86_64 use the number of disabled local apics in ACPI tables MADT
+to determine the number of potentially hot-pluggable cpus. The implementation
+should only rely on this to count the #of cpus, but *MUST* not rely on the
+apicid values in those tables for disabled apics. In the event BIOS doesnt
+mark such hot-pluggable cpus as disabled entries, one could use this
+parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map.
+
+s390 uses the number of cpus it detects at IPL time to also the number of bits
+in cpu_possible_map. If it is desired to add additional cpus at a later time
+the number should be specified using this option or the possible_cpus option.
+
+possible_cpus=n		[s390 only] use this to set hotpluggable cpus.
+			This option sets possible_cpus bits in
+			cpu_possible_map. Thus keeping the numbers of bits set
+			constant even if the machine gets rebooted.
+			This option overrides additional_cpus.
 
 CPU maps and such
 -----------------

Documentation/dvb/bt8xx.txt

@@ -111,4 +111,8 @@ source:  linux/Documentation/video4linux/CARDLIST.bttv
 If you have problems with this please do ask on the mailing list.
 
 --
-Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
+Authors: Richard Walker,
+	 Jamie Honan,
+	 Michael Hunold,
+	 Manu Abraham,
+	 Michael Krufky

Documentation/feature-removal-schedule.txt

@@ -171,3 +171,21 @@ Why:	The ISA interface is faster and should be always available. The I2C
 	probing is also known to cause trouble in at least one case (see
 	bug #5889.)
 Who:	Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What:	mount/umount uevents
+When:	February 2007
+Why:	These events are not correct, and do not properly let userspace know
+	when a file system has been mounted or unmounted.  Userspace should
+	poll the /proc/mounts file instead to detect this properly.
+Who:	Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------
+
+What:	Support for NEC DDB5074 and DDB5476 evaluation boards.
+When:	June 2006
+Why:	Board specific code doesn't build anymore since ~2.6.0 and no
+	users have complained indicating there is no more need for these
+	boards.  This should really be considered a last call.
+Who:	Ralf Baechle <ralf@linux-mips.org>

Documentation/filesystems/ntfs.txt

@@ -457,6 +457,12 @@ ChangeLog
 
 Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
 
+2.1.26:
+	- Implement support for sector sizes above 512 bytes (up to the maximum
+	  supported by NTFS which is 4096 bytes).
+	- Enhance support for NTFS volumes which were supported by Windows but
+	  not by Linux due to invalid attribute list attribute flags.
+	- A few minor updates and bug fixes.
 2.1.25:
 	- Write support is now extended with write(2) being able to both
 	  overwrite existing file data and to extend files.  Also, if a write

Documentation/filesystems/tmpfs.txt

@@ -79,15 +79,27 @@ that instance in a system with many cpus making intensive use of it.
 
 
 tmpfs has a mount option to set the NUMA memory allocation policy for
-all files in that instance:
-mpol=interleave		prefers to allocate memory from each node in turn
-mpol=default		prefers to allocate memory from the local node
-mpol=bind		prefers to allocate from mpol_nodelist
-mpol=preferred		prefers to allocate from first node in mpol_nodelist
+all files in that instance (if CONFIG_NUMA is enabled) - which can be
+adjusted on the fly via 'mount -o remount ...'
 
-The following mount option is used in conjunction with mpol=interleave,
-mpol=bind or mpol=preferred:
-mpol_nodelist:	nodelist suitable for parsing with nodelist_parse.
+mpol=default             prefers to allocate memory from the local node
+mpol=prefer:Node         prefers to allocate memory from the given Node
+mpol=bind:NodeList       allocates memory only from nodes in NodeList
+mpol=interleave          prefers to allocate from each node in turn
+mpol=interleave:NodeList allocates from each node of NodeList in turn
+
+NodeList format is a comma-separated list of decimal numbers and ranges,
+a range being two hyphen-separated decimal numbers, the smallest and
+largest node numbers in the range.  For example, mpol=bind:0-3,5,7,9-15
+
+Note that trying to mount a tmpfs with an mpol option will fail if the
+running kernel does not support NUMA; and will fail if its nodelist
+specifies a node >= MAX_NUMNODES.  If your system relies on that tmpfs
+being mounted, but from time to time runs a kernel built without NUMA
+capability (perhaps a safe recovery kernel), or configured to support
+fewer nodes, then it is advisable to omit the mpol option from automatic
+mount options.  It can be added later, when the tmpfs is already mounted
+on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'.
 
 
 To specify the initial root directory you can use the following mount
@@ -109,4 +121,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
 Author:
    Christoph Rohland <cr@sap.com>, 1.12.01
 Updated:
-   Hugh Dickins <hugh@veritas.com>, 13 March 2005
+   Hugh Dickins <hugh@veritas.com>, 19 February 2006

Documentation/filesystems/v9fs.txt

@@ -57,8 +57,6 @@ OPTIONS
 
   port=n	port to connect to on the remote server
 
-  timeout=n	request timeouts (in ms) (default 60000ms)
-
   noextend	force legacy mode (no 9P2000.u semantics)
 
   uid		attempt to mount as a particular uid
@@ -74,10 +72,16 @@ OPTIONS
 RESOURCES
 =========
 
-The Linux version of the 9P server, along with some client-side utilities
-can be found at http://v9fs.sf.net (along with a CVS repository of the
-development branch of this module).  There are user and developer mailing
-lists here, as well as a bug-tracker.
+The Linux version of the 9P server is now maintained under the npfs project
+on sourceforge (http://sourceforge.net/projects/npfs).
+
+There are user and developer mailing lists available through the v9fs project
+on sourceforge (http://sourceforge.net/projects/v9fs).
+
+News and other information is maintained on SWiK (http://swik.net/v9fs).
+
+Bug reports may be issued through the kernel.org bugzilla 
+(http://bugzilla.kernel.org)
 
 For more information on the Plan 9 Operating System check out
 http://plan9.bell-labs.com/plan9

Documentation/kernel-parameters.txt

@@ -335,6 +335,12 @@ running once the system is up.
 			timesource is not avalible, it defaults to PIT.
 			Format: { pit | tsc | cyclone | pmtmr }
 
+	disable_8254_timer
+	enable_8254_timer
+			[IA32/X86_64] Disable/Enable interrupt 0 timer routing
+			over the 8254 in addition to over the IO-APIC. The
+			kernel tries to set a sensible default.
+
 	hpet=		[IA-32,HPET] option to disable HPET and use PIT.
 			Format: disable
 
@@ -1034,6 +1040,8 @@ running once the system is up.
 
 	nomce		[IA-32] Machine Check Exception
 
+	nomca		[IA-64] Disable machine check abort handling
+
 	noresidual	[PPC] Don't use residual data on PReP machines.
 
 	noresume	[SWSUSP] Disables resume and restores original swap
@@ -1133,6 +1141,8 @@ running once the system is up.
 				Mechanism 1.
 		conf2		[IA-32] Force use of PCI Configuration
 				Mechanism 2.
+		nommconf	[IA-32,X86_64] Disable use of MMCONFIG for PCI
+				Configuration
 		nosort		[IA-32] Don't sort PCI devices according to
 				order given by the PCI BIOS. This sorting is
 				done to get a device order compatible with
@@ -1280,6 +1290,19 @@ running once the system is up.
 			New name for the ramdisk parameter.
 			See Documentation/ramdisk.txt.
 
+	rcu.blimit=	[KNL,BOOT] Set maximum number of finished
+			RCU callbacks to process in one batch.
+
+	rcu.qhimark=	[KNL,BOOT] Set threshold of queued
+			RCU callbacks over which batch limiting is disabled.
+
+	rcu.qlowmark=	[KNL,BOOT] Set threshold of queued
+			RCU callbacks below which batch limiting is re-enabled.
+
+	rcu.rsinterval=	[KNL,BOOT,SMP] Set the number of additional
+			RCU callbacks to queued before forcing reschedule
+			on all cpus.
+
 	rdinit=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /init from the ramdisk,
@@ -1636,6 +1659,9 @@ running once the system is up.
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
 
+	norandmaps	Don't use address space randomization
+			Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space
+
 
 ______________________________________________________________________
 Changelog:

Documentation/scsi/ChangeLog.megaraid_sas

@@ -1,3 +1,26 @@
+1 Release Date    : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.04
+3 Older Version   : 00.00.02.04 
+
+i.	Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
+	During initialization, depending on the device id, the template members 
+	are initialized with function pointers specific to the ppc or 
+	xscale controllers.  
+
+		-Sumant Patro <Sumant.Patro@lsil.com>
+		
+1 Release Date    : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro 
+							<Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.04
+3 Older Version   : 00.00.02.02 
+i.	Register 16 byte CDB capability with scsi midlayer 
+
+	"Ths patch properly registers the 16 byte command length capability of the 
+	megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas 
+	hardware supports 16 byte CDB's."
+
+		-Joshua Giles <joshua_giles@dell.com> 
+
 1 Release Date    : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
 2 Current Version : 00.00.02.02
 3 Older Version   : 00.00.02.01 

Documentation/sysctl/kernel.txt

@@ -16,6 +16,7 @@ before actually making adjustments.
 
 Currently, these files might (depending on your configuration)
 show up in /proc/sys/kernel:
+- acpi_video_flags
 - acct
 - core_pattern
 - core_uses_pid
@@ -57,6 +58,15 @@ show up in /proc/sys/kernel:
 
 ==============================================================
 
+acpi_video_flags:
+
+flags
+
+See Doc*/kernel/power/video.txt, it allows mode of video boot to be
+set during run time.
+
+==============================================================
+
 acct:
 
 highwater lowwater frequency

Documentation/video4linux/CARDLIST.saa7134

@@ -13,7 +13,7 @@
  12 -> Medion 7134                              [16be:0003]
  13 -> Typhoon TV+Radio 90031
  14 -> ELSA EX-VISION 300TV                     [1048:226b]
- 15 -> ELSA EX-VISION 500TV                     [1048:226b]
+ 15 -> ELSA EX-VISION 500TV                     [1048:226a]
  16 -> ASUS TV-FM 7134                          [1043:4842,1043:4830,1043:4840]
  17 -> AOPEN VA1000 POWER                       [1131:7133]
  18 -> BMK MPEX No Tuner
@@ -75,7 +75,7 @@
  74 -> LifeView FlyTV Platinum Mini2            [14c0:1212]
  75 -> AVerMedia AVerTVHD MCE A180              [1461:1044]
  76 -> SKNet MonsterTV Mobile                   [1131:4ee9]
- 77 -> Pinnacle PCTV 110i (saa7133)             [11bd:002e]
+ 77 -> Pinnacle PCTV 40i/50i/110i (saa7133)     [11bd:002e]
  78 -> ASUSTeK P7131 Dual                       [1043:4862]
  79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
  80 -> ASUS Digimatrix TV                       [1043:0210]

Documentation/x86_64/boot-options.txt

@@ -52,6 +52,10 @@ APICs
 		 apicmaintimer. Useful when your PIT timer is totally
 		 broken.
 
+   disable_8254_timer / enable_8254_timer
+		 Enable interrupt 0 timer routing over the 8254 in addition to over
+	         the IO-APIC. The kernel tries to set a sensible default.
+
 Early Console
 
    syntax: earlyprintk=vga

MAINTAINERS

@@ -838,7 +838,6 @@ S:	Maintained
 
 DVB SUBSYSTEM AND DRIVERS
 P:	LinuxTV.org Project
-M:	mchehab@infradead.org
 M:	v4l-dvb-maintainer@linuxtv.org
 L: 	linux-dvb@linuxtv.org (subscription required)
 W:	http://linuxtv.org/
@@ -1632,8 +1631,8 @@ S:	Supported
 
 LINUX SECURITY MODULE (LSM) FRAMEWORK
 P:	Chris Wright
-M:	chrisw@osdl.org
-L:	linux-security-module@wirex.com
+M:	chrisw@sous-sol.org
+L:	linux-security-module@vger.kernel.org
 W:	http://lsm.immunix.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
 S:	Supported

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 16
-EXTRAVERSION =-rc3
+EXTRAVERSION =-rc6
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*
@@ -106,13 +106,12 @@ KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
 $(if $(KBUILD_OUTPUT),, \
      $(error output directory "$(saved-output)" does not exist))
 
-.PHONY: $(MAKECMDGOALS) cdbuilddir
-$(MAKECMDGOALS) _all: cdbuilddir
+.PHONY: $(MAKECMDGOALS)
 
-cdbuilddir:
+$(filter-out _all,$(MAKECMDGOALS)) _all:
 	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
 	KBUILD_SRC=$(CURDIR) \
-	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $(MAKECMDGOALS)
+	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
 
 # Leave processing to above invocation of make
 skip-makefile := 1
@@ -906,7 +905,7 @@ define filechk_version.h
 	)
 endef
 
-include/linux/version.h: $(srctree)/Makefile .config FORCE
+include/linux/version.h: $(srctree)/Makefile .config .kernelrelease FORCE
 	$(call filechk,version.h)
 
 # ---------------------------------------------------------------------------

arch/alpha/kernel/irq.c

@@ -151,8 +151,13 @@ handle_irq(int irq, struct pt_regs * regs)
 	}
 
 	irq_enter();
+	/*
+	 * __do_IRQ() must be called with IPL_MAX. Note that we do not
+	 * explicitly enable interrupts afterwards - some MILO PALcode
+	 * (namely LX164 one) seems to have severe problems with RTI
+	 * at IPL 0.
+	 */
 	local_irq_disable();
 	__do_IRQ(irq, regs);
-	local_irq_enable();
 	irq_exit();
 }

arch/arm/Kconfig

@@ -78,7 +78,7 @@ menu "System Type"
 
 choice
 	prompt "ARM system type"
-	default ARCH_RPC
+	default ARCH_VERSATILE
 
 config ARCH_CLPS7500
 	bool "Cirrus-CL-PS7500FE"
@@ -799,6 +799,8 @@ source "drivers/i2c/Kconfig"
 
 source "drivers/spi/Kconfig"
 
+source "drivers/w1/Kconfig"
+
 source "drivers/hwmon/Kconfig"
 
 #source "drivers/l3/Kconfig"

arch/arm/common/rtctime.c

@@ -128,19 +128,27 @@ EXPORT_SYMBOL(rtc_tm_to_time);
 /*
  * Calculate the next alarm time given the requested alarm time mask
  * and the current time.
- *
- * FIXME: for now, we just copy the alarm time because we're lazy (and
- * is therefore buggy - setting a 10am alarm at 8pm will not result in
- * the alarm triggering.)
  */
 void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
 {
+	unsigned long next_time;
+	unsigned long now_time;
+
 	next->tm_year = now->tm_year;
 	next->tm_mon = now->tm_mon;
 	next->tm_mday = now->tm_mday;
 	next->tm_hour = alrm->tm_hour;
 	next->tm_min = alrm->tm_min;
 	next->tm_sec = alrm->tm_sec;
+
+	rtc_tm_to_time(now, &now_time);
+	rtc_tm_to_time(next, &next_time);
+
+	if (next_time < now_time) {
+		/* Advance one day */
+		next_time += 60 * 60 * 24;
+		rtc_time_to_tm(next_time, next);
+	}
 }
 
 static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)

arch/arm/kernel/asm-offsets.c

@@ -57,7 +57,9 @@ int main(void)
   DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
   DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
   DEFINE(TI_VFPSTATE,		offsetof(struct thread_info, vfpstate));
-  DEFINE(TI_IWMMXT_STATE,	(offsetof(struct thread_info, fpstate)+4)&~7);
+#ifdef CONFIG_IWMMXT
+  DEFINE(TI_IWMMXT_STATE,	offsetof(struct thread_info, fpstate.iwmmxt));
+#endif
   BLANK();
   DEFINE(S_R0,			offsetof(struct pt_regs, ARM_r0));
   DEFINE(S_R1,			offsetof(struct pt_regs, ARM_r1));

arch/arm/kernel/calls.S

@@ -111,7 +111,7 @@
 		CALL(sys_statfs)
 /* 100 */	CALL(sys_fstatfs)
 		CALL(sys_ni_syscall)
-		CALL(OBSOLETE(sys_socketcall))
+		CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall)))
 		CALL(sys_syslog)
 		CALL(sys_setitimer)
 /* 105 */	CALL(sys_getitimer)

arch/arm/kernel/entry-armv.S

@@ -566,7 +566,7 @@ ENTRY(__switch_to)
 	ldr	r6, [r2, #TI_CPU_DOMAIN]!
 #endif
 #if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_MPCORE
+#ifdef CONFIG_CPU_32v6K
 	clrex
 #else
 	strex	r5, r4, [ip]			@ Clear exclusive monitor

arch/arm/kernel/ptrace.c

@@ -610,15 +610,12 @@ static int ptrace_setfpregs(struct task_struct *tsk, void __user *ufp)
 static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp)
 {
 	struct thread_info *thread = task_thread_info(tsk);
-	void *ptr = &thread->fpstate;
 
 	if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
 		return -ENODATA;
 	iwmmxt_task_disable(thread);  /* force it to ram */
-	/* The iWMMXt state is stored doubleword-aligned.  */
-	if (((long) ptr) & 4)
-		ptr += 4;
-	return copy_to_user(ufp, ptr, 0x98) ? -EFAULT : 0;
+	return copy_to_user(ufp, &thread->fpstate.iwmmxt, IWMMXT_SIZE)
+		? -EFAULT : 0;
 }
 
 /*
@@ -627,15 +624,12 @@ static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp)
 static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp)
 {
 	struct thread_info *thread = task_thread_info(tsk);
-	void *ptr = &thread->fpstate;
 
 	if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
 		return -EACCES;
 	iwmmxt_task_release(thread);  /* force a reload */
-	/* The iWMMXt state is stored doubleword-aligned.  */
-	if (((long) ptr) & 4)
-		ptr += 4;
-	return copy_from_user(ptr, ufp, 0x98) ? -EFAULT : 0;
+	return copy_from_user(&thead->fpstate.iwmmxt, ufp, IWMMXT_SIZE)
+		? -EFAULT : 0;
 }
 
 #endif

arch/arm/kernel/setup.c

@@ -23,6 +23,7 @@
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
+#include <linux/smp.h>
 
 #include <asm/cpu.h>
 #include <asm/elf.h>
@@ -771,6 +772,10 @@ void __init setup_arch(char **cmdline_p)
 	paging_init(&meminfo, mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
+#ifdef CONFIG_SMP
+	smp_init_cpus();
+#endif
+
 	cpu_init();
 
 	/*

arch/arm/kernel/smp.c

@@ -338,7 +338,6 @@ void __init smp_prepare_boot_cpu(void)
 
 	per_cpu(cpu_data, cpu).idle = current;
 
-	cpu_set(cpu, cpu_possible_map);
 	cpu_set(cpu, cpu_present_map);
 	cpu_set(cpu, cpu_online_map);
 }

arch/arm/kernel/sys_oabi-compat.c

@@ -64,6 +64,7 @@
  * sys_connect:
  * sys_sendmsg:
  * sys_sendto:
+ * sys_socketcall:
  *
  *   struct sockaddr_un loses its padding with EABI.  Since the size of the
  *   structure is used as a validation test in unix_mkname(), we need to
@@ -78,6 +79,7 @@
 #include <linux/eventpoll.h>
 #include <linux/sem.h>
 #include <linux/socket.h>
+#include <linux/net.h>
 #include <asm/ipc.h>
 #include <asm/uaccess.h>
 
@@ -408,3 +410,31 @@ asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned fla
 	return sys_sendmsg(fd, msg, flags);
 }
 
+asmlinkage long sys_oabi_socketcall(int call, unsigned long __user *args)
+{
+	unsigned long r = -EFAULT, a[6];
+
+	switch (call) {
+	case SYS_BIND:
+		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
+			r = sys_oabi_bind(a[0], (struct sockaddr __user *)a[1], a[2]);
+		break;
+	case SYS_CONNECT:
+		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
+			r = sys_oabi_connect(a[0], (struct sockaddr __user *)a[1], a[2]);
+		break;
+	case SYS_SENDTO:
+		if (copy_from_user(a, args, 6 * sizeof(long)) == 0)
+			r = sys_oabi_sendto(a[0], (void __user *)a[1], a[2], a[3],
+					    (struct sockaddr __user *)a[4], a[5]);
+		break;
+	case SYS_SENDMSG:
+		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
+			r = sys_oabi_sendmsg(a[0], (struct msghdr __user *)a[1], a[2]);
+		break;
+	default:
+		r = sys_socketcall(call, args);
+	}
+
+	return r;
+}

arch/arm/kernel/time.c

@@ -422,12 +422,14 @@ static int timer_dyn_tick_disable(void)
 void timer_dyn_reprogram(void)
 {
 	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
+	unsigned long next, seq;
 
-	if (dyn_tick) {
-		write_seqlock(&xtime_lock);
-		if (dyn_tick->state & DYN_TICK_ENABLED)
+	if (dyn_tick && (dyn_tick->state & DYN_TICK_ENABLED)) {
+		next = next_timer_interrupt();
+		do {
+			seq = read_seqbegin(&xtime_lock);
 			dyn_tick->reprogram(next_timer_interrupt() - jiffies);
-		write_sequnlock(&xtime_lock);
+		} while (read_seqretry(&xtime_lock, seq));
 	}
 }
 

arch/arm/kernel/traps.c

@@ -19,6 +19,7 @@
 #include <linux/personality.h>
 #include <linux/ptrace.h>
 #include <linux/kallsyms.h>
+#include <linux/delay.h>
 #include <linux/init.h>
 
 #include <asm/atomic.h>
@@ -231,6 +232,13 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	spin_unlock_irq(&die_lock);
+
+	if (panic_on_oops) {
+		printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+		ssleep(5);
+		panic("Fatal exception");
+	}
+
 	do_exit(SIGSEGV);
 }
 

arch/arm/lib/muldi3.S

@@ -29,8 +29,8 @@ ENTRY(__aeabi_lmul)
 
 	mul	xh, yl, xh
 	mla	xh, xl, yh, xh
-	mov	ip, xl, asr #16
-	mov	yh, yl, asr #16
+	mov	ip, xl, lsr #16
+	mov	yh, yl, lsr #16
 	bic	xl, xl, ip, lsl #16
 	bic	yl, yl, yh, lsl #16
 	mla	xh, yh, ip, xh

arch/arm/mach-at91rm9200/devices.c

@@ -100,8 +100,10 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
 		at91_set_gpio_input(data->vbus_pin, 0);
 		at91_set_deglitch(data->vbus_pin, 1);
 	}
-	if (data->pullup_pin)
+	if (data->pullup_pin) {
 		at91_set_gpio_output(data->pullup_pin, 0);
+		at91_set_multi_drive(data->pullup_pin, 1);
+	}
 
 	udc_data = *data;
 	platform_device_register(&at91rm9200_udc_device);

arch/arm/mach-at91rm9200/gpio.c

@@ -159,6 +159,23 @@ int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
 }
 EXPORT_SYMBOL(at91_set_deglitch);
 
+/*
+ * enable/disable the multi-driver; This is only valid for output and
+ * allows the output pin to run as an open collector output.
+ */
+int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
+{
+	void __iomem	*pio = pin_to_controller(pin);
+	unsigned	mask = pin_to_mask(pin);
+
+	if (!pio)
+		return -EINVAL;
+
+	__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
+	return 0;
+}
+EXPORT_SYMBOL(at91_set_multi_drive);
+
 /*--------------------------------------------------------------------------*/
 
 
@@ -257,8 +274,18 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
 		gpio = &irq_desc[pin];
 
 		while (isr) {
-			if (isr & 1)
-				gpio->handle(pin, gpio, regs);
+			if (isr & 1) {
+				if (unlikely(gpio->disable_depth)) {
+					/*
+					 * The core ARM interrupt handler lazily disables IRQs so
+					 * another IRQ must be generated before it actually gets
+					 * here to be disabled on the GPIO controller.
+					 */
+					gpio_irq_mask(pin);
+				}
+				else
+					gpio->handle(pin, gpio, regs);
+			}
 			pin++;
 			gpio++;
 			isr >>= 1;

arch/arm/mach-integrator/platsmp.c

@@ -140,6 +140,18 @@ static void __init poke_milo(void)
 	mb();
 }
 
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned int ncores = get_core_count();
@@ -176,14 +188,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		max_cpus = ncores;
 
 	/*
-	 * Initialise the possible/present maps.
-	 * cpu_possible_map describes the set of CPUs which may be present
-	 * cpu_present_map describes the set of CPUs populated
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
 	 */
-	for (i = 0; i < max_cpus; i++) {
-		cpu_set(i, cpu_possible_map);
+	for (i = 0; i < max_cpus; i++)
 		cpu_set(i, cpu_present_map);
-	}
 
 	/*
 	 * Do we need any more CPUs? If so, then let them know where

arch/arm/mach-iop3xx/iop321-setup.c

@@ -13,7 +13,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/config.h>
-#include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>

arch/arm/mach-iop3xx/iop331-setup.c

@@ -12,7 +12,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/config.h>
-#include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>

arch/arm/mach-ixp4xx/Kconfig

@@ -8,11 +8,9 @@ menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
 
-# This entry is placed on top because otherwise it would have
-# been shown as a submenu.
 config MACH_NSLU2
 	bool
-	prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
+	prompt "Linksys NSLU2"
 	help
 	  Say 'Y' here if you want your kernel to support Linksys's
 	  NSLU2 NAS device. For more information on this platform,

arch/arm/mach-ixp4xx/common.c

@@ -111,24 +111,30 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 	if (line < 0)
 		return -EINVAL;
 
-	if (type & IRQT_BOTHEDGE) {
+	switch (type){
+	case IRQT_BOTHEDGE:
 		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP4XX_IRQ_EDGE;
-	} else  if (type & IRQT_RISING) {
+		break;
+	case IRQT_RISING:
 		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
-	} else if (type & IRQT_FALLING) {
+		break;
+	case IRQT_FALLING:
 		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
-	} else if (type & IRQT_HIGH) {
+		break;
+	case IRQT_HIGH:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP4XX_IRQ_LEVEL;
-	} else if (type & IRQT_LOW) {
+		break;
+	case IRQT_LOW:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP4XX_IRQ_LEVEL;
-	} else
+		break;
+	default:
 		return -EINVAL;
-
+	}
 	ixp4xx_config_irq(irq, irq_type);
 
 	if (line >= 8) {	/* pins 8-15 */

arch/arm/mach-ixp4xx/nas100d-power.c

@@ -56,6 +56,9 @@ static int __init nas100d_power_init(void)
 
 static void __exit nas100d_power_exit(void)
 {
+	if (!(machine_is_nas100d()))
+		return;
+
 	free_irq(NAS100D_RB_IRQ, NULL);
 }
 

arch/arm/mach-ixp4xx/nas100d-setup.c

@@ -113,6 +113,9 @@ static void __init nas100d_init(void)
 {
 	ixp4xx_sys_init();
 
+	/* gpio 14 and 15 are _not_ clocks */
+	*IXP4XX_GPIO_GPCLKR = 0;
+
 	nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	nas100d_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;

arch/arm/mach-ixp4xx/nslu2-power.c

@@ -77,6 +77,9 @@ static int __init nslu2_power_init(void)
 
 static void __exit nslu2_power_exit(void)
 {
+	if (!(machine_is_nslu2()))
+		return;
+
 	free_irq(NSLU2_RB_IRQ, NULL);
 	free_irq(NSLU2_PB_IRQ, NULL);
 }

arch/arm/mach-ixp4xx/nslu2-setup.c

@@ -27,8 +27,6 @@ static struct flash_platform_data nslu2_flash_data = {
 };
 
 static struct resource nslu2_flash_resource = {
-	.start			= NSLU2_FLASH_BASE,
-	.end			= NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
 	.flags			= IORESOURCE_MEM,
 };
 
@@ -52,6 +50,12 @@ static struct platform_device nslu2_i2c_controller = {
 	.num_resources		= 0,
 };
 
+static struct platform_device nslu2_beeper = {
+	.name			= "ixp4xx-beeper",
+	.id			= NSLU2_GPIO_BUZZ,
+	.num_resources		= 0,
+};
+
 static struct resource nslu2_uart_resources[] = {
 	{
 		.start		= IXP4XX_UART1_BASE_PHYS,
@@ -99,6 +103,7 @@ static struct platform_device *nslu2_devices[] __initdata = {
 	&nslu2_i2c_controller,
 	&nslu2_flash,
 	&nslu2_uart,
+	&nslu2_beeper,
 };
 
 static void nslu2_power_off(void)
@@ -116,6 +121,10 @@ static void __init nslu2_init(void)
 {
 	ixp4xx_sys_init();
 
+	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	nslu2_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
 	pm_power_off = nslu2_power_off;
 
 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));

arch/arm/mach-realview/platsmp.c

@@ -143,6 +143,18 @@ static void __init poke_milo(void)
 	mb();
 }
 
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned int ncores = get_core_count();
@@ -179,14 +191,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	local_timer_setup(cpu);
 
 	/*
-	 * Initialise the possible/present maps.
-	 * cpu_possible_map describes the set of CPUs which may be present
-	 * cpu_present_map describes the set of CPUs populated
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
 	 */
-	for (i = 0; i < max_cpus; i++) {
-		cpu_set(i, cpu_possible_map);
+	for (i = 0; i < max_cpus; i++)
 		cpu_set(i, cpu_present_map);
-	}
 
 	/*
 	 * Do we need any more CPUs? If so, then let them know where

arch/arm/mach-versatile/pci.c

@@ -240,6 +240,14 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
         int i;
         int myslot = -1;
 	unsigned long val;
+	void __iomem *local_pci_cfg_base;
+
+	val = __raw_readl(SYS_PCICTL);
+	if (!(val & 1)) {
+		printk("Not plugged into PCI backplane!\n");
+		ret = -EIO;
+		goto out;
+	}
 
 	if (nr == 0) {
 		sys->mem_offset = 0;
@@ -253,48 +261,45 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 		goto out;
 	}
 
-	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0);
-	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1);
-	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2);
-
-	__raw_writel(1, SYS_PCICTL);
-
-	val = __raw_readl(SYS_PCICTL);
-	if (!(val & 1)) {
-		printk("Not plugged into PCI backplane!\n");
-		ret = -EIO;
-		goto out;
-	}
-
 	/*
 	 *  We need to discover the PCI core first to configure itself
 	 *  before the main PCI probing is performed
 	 */
-	for (i=0; i<32; i++) {
+	for (i=0; i<32; i++)
 		if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
 		    (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
 			myslot = i;
-
-			__raw_writel(myslot, PCI_SELFID);
-			val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET);
-			val |= (1<<2);
-			__raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET);
 			break;
 		}
-	}
 
 	if (myslot == -1) {
 		printk("Cannot find PCI core!\n");
 		ret = -EIO;
-	} else {
-		printk("PCI core found (slot %d)\n",myslot);
-		/* Do not to map Versatile FPGA PCI device
-		   into memory space as we are short of
-		   mappable memory */
-		pci_slot_ignore |= (1 << myslot);
-		ret = 1;
+		goto out;
 	}
 
+	printk("PCI core found (slot %d)\n",myslot);
+
+	__raw_writel(myslot, PCI_SELFID);
+	local_pci_cfg_base = (void *) VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
+
+	val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
+	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
+	__raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
+
+	/*
+	 * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
+	 */
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
+
+	/*
+	 * Do not to map Versatile FPGA PCI device into memory space
+	 */
+	pci_slot_ignore |= (1 << myslot);
+	ret = 1;
+
  out:
 	return ret;
 }
@@ -305,18 +310,18 @@ struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
 }
 
-/*
- * V3_LB_BASE? - local bus address
- * V3_LB_MAP?  - pci bus address
- */
 void __init pci_versatile_preinit(void)
 {
-}
+	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
+	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
+	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
 
-void __init pci_versatile_postinit(void)
-{
-}
+	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
+	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
+	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
 
+	__raw_writel(1, SYS_PCICTL);
+}
 
 /*
  * map the specified device/slot/pin to an IRQ.   Different backplanes may need to modify this.
@@ -326,16 +331,15 @@ static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	int irq;
 	int devslot = PCI_SLOT(dev->devfn);
 
-	/* slot,  pin,  irq
-	    24	  1	27
-	    25    1	28	untested
-	    26	  1	29
-	    27    1	30	untested
-	*/
-
-	irq = 27 + ((slot + pin + 2) % 3);	/* Fudged */
+	/* slot,  pin,	irq
+	 *  24     1     27
+	 *  25     1     28
+	 *  26     1     29
+	 *  27     1     30
+	 */
+	irq = 27 + ((slot + pin - 1) & 3);
 
-	printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
+	printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
 
 	return irq;
 }
@@ -347,7 +351,6 @@ static struct hw_pci versatile_pci __initdata = {
 	.setup			= pci_versatile_setup,
 	.scan			= pci_versatile_scan_bus,
 	.preinit		= pci_versatile_preinit,
-	.postinit		= pci_versatile_postinit,
 };
 
 static int __init versatile_pci_init(void)

arch/arm/mm/abort-ev6.S

@@ -20,7 +20,7 @@
  */
 	.align	5
 ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_MPCORE
+#ifdef CONFIG_CPU_32v6K
 	clrex
 #else
 	strex	r0, r1, [sp]			@ Clear the exclusive monitor

arch/arm/mm/cache-v6.S

@@ -96,15 +96,16 @@ ENTRY(v6_coherent_user_range)
 #ifdef HARVARD_CACHE
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I line
 	add	r0, r0, #CACHE_LINE_SIZE
 	cmp	r0, r1
 	blo	1b
 #endif
-	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
-#ifdef HARVARD_CACHE
 	mov	r0, #0
+#ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
+#else
+	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
 #endif
 	mov	pc, lr
 

arch/arm/mm/flush.c

@@ -24,14 +24,16 @@
 static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 {
 	unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+	const int zero = 0;
 
 	set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
 	flush_tlb_kernel_page(to);
 
 	asm(	"mcrr	p15, 0, %1, %0, c14\n"
-	"	mcrr	p15, 0, %1, %0, c5\n"
+	"	mcr	p15, 0, %2, c7, c10, 4\n"
+	"	mcr	p15, 0, %2, c7, c5, 0\n"
 	    :
-	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
+	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
 	    : "cc");
 }
 

arch/arm/mm/tlb-v6.S

@@ -80,6 +80,7 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
+	mcr	p15, 0, r2, c7, c10, 4		@ data synchronization barrier
 	mov	pc, lr
 
 	.section ".text.init", #alloc, #execinstr

arch/arm/plat-omap/pm.c

@@ -38,7 +38,6 @@
 #include <linux/pm.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
-#include <linux/pm.h>
 #include <linux/interrupt.h>
 
 #include <asm/io.h>

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jan 9 12:56:42 2006
+# Last update: Mon Feb 20 10:18:02 2006
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -904,7 +904,7 @@ wg302v2			MACH_WG302V2		WG302V2			890
 eb42x			MACH_EB42X		EB42X			891
 iq331es			MACH_IQ331ES		IQ331ES			892
 cosydsp			MACH_COSYDSP		COSYDSP			893
-uplat7d			MACH_UPLAT7D		UPLAT7D			894
+uplat7d_proto		MACH_UPLAT7D		UPLAT7D			894
 ptdavinci		MACH_PTDAVINCI		PTDAVINCI		895
 mbus			MACH_MBUS		MBUS			896
 nadia2vb		MACH_NADIA2VB		NADIA2VB		897
@@ -938,3 +938,34 @@ auckland		MACH_AUCKLAND		AUCKLAND		924
 ak3220m			MACH_AK3320M		AK3320M			925
 duramax			MACH_DURAMAX		DURAMAX			926
 n35			MACH_N35		N35			927
+pronghorn		MACH_PRONGHORN		PRONGHORN		928
+fundy			MACH_FUNDY		FUNDY			929
+logicpd_pxa270		MACH_LOGICPD_PXA270	LOGICPD_PXA270		930
+cpu777			MACH_CPU777		CPU777			931
+simicon9201		MACH_SIMICON9201	SIMICON9201		932
+leap2_hpm		MACH_LEAP2_HPM		LEAP2_HPM		933
+cm922txa10		MACH_CM922TXA10		CM922TXA10		934
+sandgate		MACH_PXA		PXA			935
+sandgate2		MACH_SANDGATE2		SANDGATE2		936
+sandgate2g		MACH_SANDGATE2G		SANDGATE2G		937
+sandgate2p		MACH_SANDGATE2P		SANDGATE2P		938
+fred_jack		MACH_FRED_JACK		FRED_JACK		939
+ttg_color1		MACH_TTG_COLOR1		TTG_COLOR1		940
+nxeb500hmi		MACH_NXEB500HMI		NXEB500HMI		941
+netdcu8			MACH_NETDCU8		NETDCU8			942
+ml675050_cpu_boa	MACH_ML675050_CPU_BOA	ML675050_CPU_BOA	943
+ng_fvx538		MACH_NG_FVX538		NG_FVX538		944
+ng_fvs338		MACH_NG_FVS338		NG_FVS338		945
+pnx4103			MACH_PNX4103		PNX4103			946
+hesdb			MACH_HESDB		HESDB			947
+xsilo			MACH_XSILO		XSILO			948
+espresso		MACH_ESPRESSO		ESPRESSO		949
+emlc			MACH_EMLC		EMLC			950
+sisteron		MACH_SISTERON		SISTERON		951
+rx1950			MACH_RX1950		RX1950			952
+tsc_venus		MACH_TSC_VENUS		TSC_VENUS		953
+ds101j			MACH_DS101J		DS101J			954
+mxc300_30ads		MACH_MXC30030ADS	MXC30030ADS		955
+fujitsu_wimaxsoc	MACH_FUJITSU_WIMAXSOC	FUJITSU_WIMAXSOC	956
+dualpcmodem		MACH_DUALPCMODEM	DUALPCMODEM		957
+gesbc9312		MACH_GESBC9312		GESBC9312		958

arch/h8300/Kconfig.debug

@@ -34,7 +34,7 @@ config GDB_DEBUG
 	help
 	  gdb stub exception support
 
-config CONFIG_SH_STANDARD_BIOS
+config SH_STANDARD_BIOS
 	bool "Use gdb protocol serial console"
 	depends on (!H8300H_SIM && !H8S_SIM)
 	help

arch/h8300/defconfig

@@ -328,7 +328,7 @@ CONFIG_FULLDEBUG=y
 CONFIG_NO_KERNEL_MSG=y
 # CONFIG_SYSCALL_PRINT is not set
 # CONFIG_GDB_DEBUG is not set
-# CONFIG_CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_DEFAULT_CMDLINE is not set
 # CONFIG_BLKDEV_RESERVE is not set
 

arch/h8300/kernel/process.c

@@ -45,6 +45,9 @@
 #include <asm/setup.h>
 #include <asm/pgtable.h>
 
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
 asmlinkage void ret_from_fork(void);
 
 /*

arch/i386/Kconfig

@@ -733,7 +733,7 @@ config PHYSICAL_START
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
+	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1060,6 +1060,7 @@ source "arch/i386/oprofile/Kconfig"
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes

arch/i386/kernel/Makefile

@@ -7,11 +7,11 @@ extra-y := head.o init_task.o vmlinux.lds
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
 		pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
-		quirks.o i8237.o
+		quirks.o i8237.o topology.o
 
 obj-y				+= cpu/
 obj-y				+= timers/
-obj-$(CONFIG_ACPI)		+= acpi/
+obj-y				+= acpi/
 obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot.o
 obj-$(CONFIG_MCA)		+= mca.o
 obj-$(CONFIG_X86_MSR)		+= msr.o

arch/i386/kernel/acpi/Makefile

@@ -1,4 +1,4 @@
-obj-y				:= boot.o
+obj-$(CONFIG_ACPI)		+= boot.o
 obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
 

arch/i386/kernel/acpi/boot.c

@@ -1111,9 +1111,6 @@ int __init acpi_boot_table_init(void)
 		disable_acpi();
 		return error;
 	}
-#ifdef __i386__
-	check_acpi_pci();
-#endif
 
 	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
 

arch/i386/kernel/acpi/earlyquirk.c

@@ -7,14 +7,22 @@
 #include <linux/pci.h>
 #include <asm/pci-direct.h>
 #include <asm/acpi.h>
+#include <asm/apic.h>
 
 static int __init check_bridge(int vendor, int device)
 {
+#ifdef CONFIG_ACPI
 	/* According to Nvidia all timer overrides are bogus. Just ignore
 	   them all. */
 	if (vendor == PCI_VENDOR_ID_NVIDIA) {
 		acpi_skip_timer_override = 1;
 	}
+#endif
+	if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) {
+		timer_over_8254 = 0;
+		printk(KERN_INFO "ATI board detected. Disabling timer routing "
+				"over 8254.\n");
+	}
 	return 0;
 }
 

arch/i386/kernel/cpu/common.c

@@ -4,6 +4,7 @@
 #include <linux/smp.h>
 #include <linux/module.h>
 #include <linux/percpu.h>
+#include <linux/bootmem.h>
 #include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/i387.h>
@@ -18,6 +19,9 @@
 
 #include "cpu.h"
 
+DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
+EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr);
+
 DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
 EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
 
@@ -274,10 +278,10 @@ void __devinit generic_identify(struct cpuinfo_x86 * c)
 			c->x86_capability[4] = excap;
 			c->x86 = (tfms >> 8) & 15;
 			c->x86_model = (tfms >> 4) & 15;
-			if (c->x86 == 0xf) {
+			if (c->x86 == 0xf)
 				c->x86 += (tfms >> 20) & 0xff;
+			if (c->x86 >= 0x6)
 				c->x86_model += ((tfms >> 16) & 0xF) << 4;
-			} 
 			c->x86_mask = tfms & 15;
 		} else {
 			/* Have CPUID level 0 only - unheard of */
@@ -571,8 +575,9 @@ void __devinit cpu_init(void)
 	int cpu = smp_processor_id();
 	struct tss_struct * t = &per_cpu(init_tss, cpu);
 	struct thread_struct *thread = &current->thread;
-	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+	struct desc_struct *gdt;
 	__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
+	struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
 
 	if (cpu_test_and_set(cpu, cpu_initialized)) {
 		printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
@@ -589,6 +594,25 @@ void __devinit cpu_init(void)
 		set_in_cr4(X86_CR4_TSD);
 	}
 
+	/*
+	 * This is a horrible hack to allocate the GDT.  The problem
+	 * is that cpu_init() is called really early for the boot CPU
+	 * (and hence needs bootmem) but much later for the secondary
+	 * CPUs, when bootmem will have gone away
+	 */
+	if (NODE_DATA(0)->bdata->node_bootmem_map) {
+		gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE);
+		/* alloc_bootmem_pages panics on failure, so no check */
+		memset(gdt, 0, PAGE_SIZE);
+	} else {
+		gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL);
+		if (unlikely(!gdt)) {
+			printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu);
+			for (;;)
+				local_irq_enable();
+		}
+	}
+
 	/*
 	 * Initialize the per-CPU GDT with the boot GDT,
 	 * and set up the GDT descriptor:
@@ -601,10 +625,10 @@ void __devinit cpu_init(void)
 		((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
 		(CPU_16BIT_STACK_SIZE - 1);
 
-	cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
- 	cpu_gdt_descr[cpu].address = (unsigned long)gdt;
+	cpu_gdt_descr->size = GDT_SIZE - 1;
+ 	cpu_gdt_descr->address = (unsigned long)gdt;
 
-	load_gdt(&cpu_gdt_descr[cpu]);
+	load_gdt(cpu_gdt_descr);
 	load_idt(&idt_descr);
 
 	/*

arch/i386/kernel/cpu/transmeta.c

@@ -1,4 +1,5 @@
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/msr.h>

arch/i386/kernel/efi.c

@@ -70,10 +70,13 @@ static void efi_call_phys_prelog(void)
 {
 	unsigned long cr4;
 	unsigned long temp;
+	struct Xgt_desc_struct *cpu_gdt_descr;
 
 	spin_lock(&efi_rt_lock);
 	local_irq_save(efi_rt_eflags);
 
+	cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
+
 	/*
 	 * If I don't have PSE, I should just duplicate two entries in page
 	 * directory. If I have PSE, I just need to duplicate one entry in
@@ -103,17 +106,18 @@ static void efi_call_phys_prelog(void)
 	 */
 	local_flush_tlb();
 
-	cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
-	load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0]));
+	cpu_gdt_descr->address = __pa(cpu_gdt_descr->address);
+	load_gdt(cpu_gdt_descr);
 }
 
 static void efi_call_phys_epilog(void)
 {
 	unsigned long cr4;
+	struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
+
+	cpu_gdt_descr->address = __va(cpu_gdt_descr->address);
+	load_gdt(cpu_gdt_descr);
 
-	cpu_gdt_descr[0].address =
-		(unsigned long) __va(cpu_gdt_descr[0].address);
-	load_gdt(&cpu_gdt_descr[0]);
 	cr4 = read_cr4();
 
 	if (cr4 & X86_CR4_PSE) {

arch/i386/kernel/head.S

@@ -534,5 +534,3 @@ ENTRY(cpu_gdt_table)
 	.quad 0x0000000000000000	/* 0xf0 - unused */
 	.quad 0x0000000000000000	/* 0xf8 - GDT entry 31: double-fault TSS */
 
-	/* Be sure this is zeroed to avoid false validations in Xen */
-	.fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0

arch/i386/kernel/i386_ksyms.c

@@ -3,8 +3,6 @@
 #include <asm/checksum.h>
 #include <asm/desc.h>
 
-EXPORT_SYMBOL_GPL(cpu_gdt_descr);
-
 EXPORT_SYMBOL(__down_failed);
 EXPORT_SYMBOL(__down_failed_interruptible);
 EXPORT_SYMBOL(__down_failed_trylock);

arch/i386/kernel/io_apic.c

@@ -51,6 +51,8 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
 
+int timer_over_8254 __initdata = 1;
+
 /*
  *	Is the SiS APIC rmw bug present ?
  *	-1 = don't know, 0 = no, 1 = yes
@@ -2267,7 +2269,8 @@ static inline void check_timer(void)
 	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
 	timer_ack = 1;
-	enable_8259A_irq(0);
+	if (timer_over_8254 > 0)
+		enable_8259A_irq(0);
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -2392,6 +2395,20 @@ void __init setup_IO_APIC(void)
 		print_IO_APIC();
 }
 
+static int __init setup_disable_8254_timer(char *s)
+{
+	timer_over_8254 = -1;
+	return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+	timer_over_8254 = 2;
+	return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
 /*
  *	Called after all the initialization is done. If we didnt find any
  *	APIC bugs then we can allow the modify fast path
@@ -2566,8 +2583,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 
 		/* Sanity check */
-		if (reg_00.bits.ID != apic_id)
-			panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+		if (reg_00.bits.ID != apic_id) {
+			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+			return -1;
+		}
 	}
 
 	apic_printk(APIC_VERBOSE, KERN_INFO

arch/i386/kernel/kprobes.c

@@ -58,6 +58,11 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode)
 
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
+	/* insn: must be on special executable page on i386. */
+	p->ainsn.insn = get_insn_slot();
+	if (!p->ainsn.insn)
+		return -ENOMEM;
+
 	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
 	p->opcode = *p->addr;
 	return 0;
@@ -77,6 +82,13 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 			   (unsigned long) p->addr + sizeof(kprobe_opcode_t));
 }
 
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	down(&kprobe_mutex);
+	free_insn_slot(p->ainsn.insn);
+	up(&kprobe_mutex);
+}
+
 static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	kcb->prev_kprobe.kp = kprobe_running();
@@ -111,7 +123,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 	if (p->opcode == BREAKPOINT_INSTRUCTION)
 		regs->eip = (unsigned long)p->addr;
 	else
-		regs->eip = (unsigned long)&p->ainsn.insn;
+		regs->eip = (unsigned long)p->ainsn.insn;
 }
 
 /* Called with kretprobe_lock held */
@@ -351,7 +363,7 @@ static void __kprobes resume_execution(struct kprobe *p,
 {
 	unsigned long *tos = (unsigned long *)&regs->esp;
 	unsigned long next_eip = 0;
-	unsigned long copy_eip = (unsigned long)&p->ainsn.insn;
+	unsigned long copy_eip = (unsigned long)p->ainsn.insn;
 	unsigned long orig_eip = (unsigned long)p->addr;
 
 	switch (p->ainsn.insn[0]) {

arch/i386/kernel/machine_kexec.c

@@ -116,13 +116,13 @@ static void load_segments(void)
 	__asm__ __volatile__ (
 		"\tljmp $"STR(__KERNEL_CS)",$1f\n"
 		"\t1:\n"
-		"\tmovl $"STR(__KERNEL_DS)",%eax\n"
-		"\tmovl %eax,%ds\n"
-		"\tmovl %eax,%es\n"
-		"\tmovl %eax,%fs\n"
-		"\tmovl %eax,%gs\n"
-		"\tmovl %eax,%ss\n"
-		);
+		"\tmovl $"STR(__KERNEL_DS)",%%eax\n"
+		"\tmovl %%eax,%%ds\n"
+		"\tmovl %%eax,%%es\n"
+		"\tmovl %%eax,%%fs\n"
+		"\tmovl %%eax,%%gs\n"
+		"\tmovl %%eax,%%ss\n"
+		::: "eax", "memory");
 #undef STR
 #undef __STR
 }

arch/i386/kernel/microcode.c

@@ -74,6 +74,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sched.h>
+#include <linux/cpumask.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
@@ -250,8 +251,8 @@ static int find_matching_ucodes (void)
 			error = -EINVAL;
 			goto out;
 		}
-		
-		for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+
+		for_each_online_cpu(cpu_num) {
 			struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
 			if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
 				continue;
@@ -293,7 +294,7 @@ static int find_matching_ucodes (void)
 					error = -EFAULT;
 					goto out;
 				}
-				for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+				for_each_online_cpu(cpu_num) {
 					struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
 					if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
 						continue;
@@ -304,7 +305,9 @@ static int find_matching_ucodes (void)
 			}
 		}
 		/* now check if any cpu has matched */
-		for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) {
+		allocated_flag = 0;
+		sum = 0;
+		for_each_online_cpu(cpu_num) {
 			if (ucode_cpu_info[cpu_num].err == MC_MARKED) { 
 				struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
 				if (!allocated_flag) {
@@ -415,12 +418,12 @@ static int do_microcode_update (void)
 	}
 
 out_free:
-	for (i = 0; i < num_online_cpus(); i++) {
+	for_each_online_cpu(i) {
 		if (ucode_cpu_info[i].mc) {
 			int j;
 			void *tmp = ucode_cpu_info[i].mc;
 			vfree(tmp);
-			for (j = i; j < num_online_cpus(); j++) {
+			for_each_online_cpu(j) {
 				if (ucode_cpu_info[j].mc == tmp)
 					ucode_cpu_info[j].mc = NULL;
 			}

arch/i386/kernel/mpparse.c

@@ -710,7 +710,7 @@ void __init get_smp_config (void)
 		 * Read the physical hardware table.  Anything here will
 		 * override the defaults.
 		 */
-		if (!smp_read_mpc((void *)mpf->mpf_physptr)) {
+		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
 			smp_found_config = 0;
 			printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
 			printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
@@ -915,6 +915,7 @@ void __init mp_register_ioapic (
 	u32			gsi_base)
 {
 	int			idx = 0;
+	int			tmpid;
 
 	if (nr_ioapics >= MAX_IO_APICS) {
 		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
@@ -935,9 +936,14 @@ void __init mp_register_ioapic (
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15))
-		mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+		tmpid = io_apic_get_unique_id(idx, id);
 	else
-		mp_ioapics[idx].mpc_apicid = id;
+		tmpid = id;
+	if (tmpid == -1) {
+		nr_ioapics--;
+		return;
+	}
+	mp_ioapics[idx].mpc_apicid = tmpid;
 	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
 	
 	/* 

arch/i386/kernel/nmi.c

@@ -357,7 +357,7 @@ static void clear_msr_range(unsigned int base, unsigned int n)
 		wrmsr(base+i, 0, 0);
 }
 
-static inline void write_watchdog_counter(const char *descr)
+static void write_watchdog_counter(const char *descr)
 {
 	u64 count = (u64)cpu_khz * 1000;
 
@@ -544,7 +544,7 @@ void nmi_watchdog_tick (struct pt_regs * regs)
 			 * die_nmi will return ONLY if NOTIFY_STOP happens..
 			 */
 			die_nmi(regs, "NMI Watchdog detected LOCKUP");
-
+	} else {
 		last_irq_sums[cpu] = sum;
 		alert_counter[cpu] = 0;
 	}

arch/i386/kernel/setup.c

@@ -1599,6 +1599,10 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled)
 		efi_map_memmap();
 
+#ifdef CONFIG_X86_IO_APIC
+	check_acpi_pci();	/* Checks more than just ACPI actually */
+#endif
+
 #ifdef CONFIG_ACPI
 	/*
 	 * Parse the ACPI tables for possible boot-time SMP configuration.

arch/i386/kernel/smpboot.c

@@ -898,12 +898,6 @@ static int __devinit do_boot_cpu(int apicid, int cpu)
 	unsigned long start_eip;
 	unsigned short nmi_high = 0, nmi_low = 0;
 
-	if (!cpu_gdt_descr[cpu].address &&
-	    !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
-		printk("Failed to allocate GDT for CPU %d\n", cpu);
-		return 1;
-	}
-
 	++cpucount;
 
 	/*

arch/i386/kernel/time.c

@@ -412,9 +412,9 @@ static int timer_resume(struct sys_device *dev)
 	write_seqlock_irqsave(&xtime_lock, flags);
 	xtime.tv_sec = sec;
 	xtime.tv_nsec = 0;
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-	jiffies += sleep_length;
+	jiffies_64 += sleep_length;
 	wall_jiffies += sleep_length;
+	write_sequnlock_irqrestore(&xtime_lock, flags);
 	if (last_timer->resume)
 		last_timer->resume();
 	cur_timer = last_timer;

arch/i386/mach-default/topology.c → arch/i386/kernel/topology.c

@@ -1,12 +1,12 @@
 /*
- * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
+ * arch/i386/kernel/topology.c - Populate driverfs with topology information
  *
  * Written by: Matthew Dobson, IBM Corporation
  * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
  *
  * Copyright (C) 2002, IBM Corp.
  *
- * All rights reserved.          
+ * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -34,7 +34,7 @@ static struct i386_cpu cpu_devices[NR_CPUS];
 
 int arch_register_cpu(int num){
 	struct node *parent = NULL;
-	
+
 #ifdef CONFIG_NUMA
 	int node = cpu_to_node(num);
 	if (node_online(node))

arch/i386/mach-default/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the linux kernel.
 #
 
-obj-y				:= setup.o topology.o
+obj-y				:= setup.o

arch/i386/mach-voyager/voyager_basic.c

@@ -23,6 +23,8 @@
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/sysrq.h>
+#include <linux/smp.h>
+#include <linux/nodemask.h>
 #include <asm/io.h>
 #include <asm/voyager.h>
 #include <asm/vic.h>
@@ -328,4 +330,3 @@ void machine_power_off(void)
 	if (pm_power_off)
 		pm_power_off();
 }
-

arch/i386/mach-voyager/voyager_smp.c

@@ -402,6 +402,7 @@ find_smp_config(void)
 	cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
 	cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16;
 	cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24;
+	cpu_possible_map = phys_cpu_present_map;
 	printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]);
 	/* Here we set up the VIC to enable SMP */
 	/* enable the CPIs by writing the base vector to their register */

arch/ia64/Kconfig

@@ -453,6 +453,7 @@ source "arch/ia64/oprofile/Kconfig"
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes

arch/ia64/configs/bigsur_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:18:49 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:10:42 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -57,18 +59,37 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
@@ -81,18 +102,17 @@ CONFIG_ITANIUM=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_BRL_EMU=y
 CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_NUMA is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 # CONFIG_HOTPLUG_CPU is not set
@@ -105,7 +125,12 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 # CONFIG_IA64_MCA_RECOVERY is not set
@@ -117,7 +142,6 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -125,6 +149,7 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -137,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -173,6 +199,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -206,6 +233,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -218,14 +250,16 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -286,20 +320,13 @@ CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=m
 
 #
@@ -390,6 +417,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -399,6 +427,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -409,14 +438,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -448,6 +470,7 @@ CONFIG_DM_ZERO=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -486,6 +509,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -524,6 +548,7 @@ CONFIG_EEPRO100=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -630,6 +655,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -681,6 +707,7 @@ CONFIG_DRM_R128=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -731,11 +758,18 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -754,6 +788,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -775,6 +810,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
@@ -830,6 +866,8 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 # CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -837,17 +875,18 @@ CONFIG_SND_PCM_OSS=m
 # Generic devices
 #
 CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -856,38 +895,38 @@ CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 CONFIG_SND_CS4281=m
+# CONFIG_SND_CS46XX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -929,12 +968,15 @@ CONFIG_USB_UHCI_HCD=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_BLUETOOTH_TTY=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -946,13 +988,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 
@@ -972,6 +1016,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1046,7 +1091,7 @@ CONFIG_USB_MON=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -1071,6 +1116,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1111,6 +1157,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1153,6 +1200,7 @@ CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_EXPERIMENTAL is not set
@@ -1179,6 +1227,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1237,28 +1286,32 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 
 #
-# Profiling support
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_IA64_GRANULE_16MB is not set
 CONFIG_IA64_GRANULE_64MB=y
 # CONFIG_IA64_PRINT_HAZARDS is not set

arch/ia64/configs/gensparse_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Wed Sep 28 08:27:29 2005
+# Linux kernel version: 2.6.16-rc5
+# Thu Mar  2 16:39:10 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,18 +60,37 @@ CONFIG_MODVERSIONS=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -82,6 +103,8 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
@@ -105,6 +128,9 @@ CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -117,13 +143,13 @@ CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -131,6 +157,7 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -145,6 +172,7 @@ CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -187,6 +215,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -221,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -233,8 +267,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -275,7 +312,13 @@ CONFIG_FW_LOADER=m
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -295,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -327,6 +363,7 @@ CONFIG_BLK_DEV_IDESCSI=m
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -400,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -409,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
@@ -436,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -476,6 +510,7 @@ CONFIG_DM_MULTIPATH=m
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
 
@@ -497,6 +532,7 @@ CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -515,6 +551,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -564,6 +601,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -668,12 +706,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -689,6 +730,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -738,10 +780,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -749,12 +791,19 @@ CONFIG_MMTIMER=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -765,6 +814,7 @@ CONFIG_MMTIMER=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -815,26 +865,28 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
 #
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -843,40 +895,40 @@ CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
 CONFIG_SND_EMU10K1=m
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 CONFIG_SND_FM801=m
 # CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -922,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -939,12 +994,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -964,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1043,6 +1102,7 @@ CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
 
 #
 # SN Devices
@@ -1050,6 +1110,10 @@ CONFIG_INFINIBAND_IPOIB=m
 CONFIG_SGI_IOC4=y
 CONFIG_SGI_IOC3=y
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -1079,6 +1143,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1120,6 +1185,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1189,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1254,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # CONFIG_HP_SIMSCSI is not set
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set

arch/ia64/configs/sim_defconfig

@@ -1,39 +1,52 @@
 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:13:41 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -43,21 +56,45 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
 CONFIG_IA64_HP_SIM=y
 # CONFIG_ITANIUM is not set
@@ -66,17 +103,36 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 # CONFIG_IA64_PAGE_SIZE_16KB is not set
 CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
 # CONFIG_IA64_CYCLONE is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=64
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
+# CONFIG_IA64_MCA_RECOVERY is not set
 # CONFIG_PERFMON is not set
 CONFIG_IA64_PALINFO=m
 
@@ -84,7 +140,6 @@ CONFIG_IA64_PALINFO=m
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
-# CONFIG_SMBIOS is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 
@@ -92,6 +147,81 @@ CONFIG_BINFMT_MISC=y
 # Power management and ACPI
 #
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
 #
 # Device Drivers
 #
@@ -99,8 +229,16 @@ CONFIG_BINFMT_MISC=y
 #
 # Generic Driver Options
 #
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -118,12 +256,16 @@ CONFIG_BINFMT_MISC=y
 #
 # Block devices
 #
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -133,6 +275,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -144,6 +287,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -157,13 +301,14 @@ CONFIG_SCSI_LOGGING=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
-# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -174,77 +319,47 @@ CONFIG_SCSI_SPI_ATTRS=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
+# CONFIG_NETDEVICES is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# Networking options
+# PHY device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# Ethernet (10 or 100Mbit)
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
+# CONFIG_NET_ETHERNET is not set
 
 #
-# QoS and/or fair queueing
+# Ethernet (1000 Mbit)
 #
-# CONFIG_NET_SCHED is not set
 
 #
-# Network testing
+# Ethernet (10000 Mbit)
 #
-# CONFIG_NET_PKTGEN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
 
 #
 # ISDN subsystem
@@ -273,16 +388,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-
 #
 # Input Device Drivers
 #
@@ -292,6 +397,15 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -310,7 +424,6 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
 
 #
 # IPMI
@@ -324,25 +437,52 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_EFI_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_FTAPE is not set
 # CONFIG_AGP is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
 #
 # Misc devices
 #
 
+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@@ -362,7 +502,6 @@ CONFIG_EFI_RTC=y
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 
 #
@@ -373,29 +512,54 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
 
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -406,7 +570,8 @@ CONFIG_JBD=y
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -415,12 +580,12 @@ CONFIG_JBD=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -448,18 +613,22 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -476,10 +645,10 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SOLARIS_X86_PARTITION is not set
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -490,8 +659,13 @@ CONFIG_EFI_PARTITION=y
 #
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # HP Simulator drivers
@@ -502,33 +676,50 @@ CONFIG_HP_SIMSERIAL_CONSOLE=y
 CONFIG_HP_SIMSCSI=y
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
-# CONFIG_IA64_GRANULE_16MB is not set
-CONFIG_IA64_GRANULE_64MB=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
 # CONFIG_IA64_DEBUG_CMPXCHG is not set
 # CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_DEBUG_INFO=y
 CONFIG_SYSVIPC_COMPAT=y
 
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
 # CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#

arch/ia64/configs/sn2_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec  2 10:33:48 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:06:38 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_CPUSETS=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -88,7 +90,7 @@ CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -126,6 +128,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -140,6 +143,7 @@ CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
@@ -166,6 +170,7 @@ CONFIG_ACPI=y
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -207,6 +212,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -247,6 +253,11 @@ CONFIG_IPV6=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -330,6 +341,7 @@ CONFIG_ATA_OVER_ETH=m
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -457,13 +469,7 @@ CONFIG_SCSI_SATA_VITESSE=y
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-CONFIG_SCSI_QLA22XX=y
-CONFIG_SCSI_QLA2300=y
-CONFIG_SCSI_QLA2322=y
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -545,6 +551,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -632,12 +639,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -686,8 +696,8 @@ CONFIG_AGP=y
 CONFIG_AGP_SGI_TIOCA=y
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=m
-# CONFIG_HPET is not set
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HPET is not set
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -702,6 +712,12 @@ CONFIG_MMTIMER=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -791,12 +807,14 @@ CONFIG_USB_UHCI_HCD=m
 # may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -816,6 +834,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -902,6 +921,10 @@ CONFIG_INFINIBAND_SRP=m
 CONFIG_SGI_IOC4=y
 CONFIG_SGI_IOC3=y
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -931,6 +954,7 @@ CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -973,6 +997,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1041,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1111,19 +1137,21 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set

arch/ia64/configs/tiger_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec  2 16:06:32 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:49:18 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -88,7 +90,7 @@ CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
@@ -162,6 +164,7 @@ CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -203,6 +206,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -237,6 +241,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -326,6 +335,7 @@ CONFIG_BLK_DEV_INITRD=y
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -443,13 +453,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_QLOGIC_FC=y
 # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -572,6 +576,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -676,12 +681,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -694,6 +702,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -738,10 +747,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 
 #
@@ -755,6 +764,12 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -765,6 +780,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -854,12 +870,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
@@ -873,6 +892,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -948,7 +968,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -980,6 +1000,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1021,6 +1042,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1090,6 +1112,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1157,18 +1180,20 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set

arch/ia64/configs/zx1_defconfig

@@ -1,16 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:15:01 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:55:36 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -26,17 +23,18 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -45,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,18 +58,37 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 CONFIG_IA64_HP_ZX1=y
@@ -82,18 +101,16 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_NUMA is not set
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 # CONFIG_HOTPLUG_CPU is not set
@@ -106,7 +123,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
@@ -118,7 +142,6 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 
@@ -126,6 +149,7 @@ CONFIG_BINFMT_MISC=y
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -138,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -179,6 +204,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -210,15 +236,18 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
 # CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -229,6 +258,11 @@ CONFIG_IP_NF_ARPTABLES=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -241,14 +275,16 @@ CONFIG_IP_NF_ARPTABLES=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -310,20 +346,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -407,13 +436,14 @@ CONFIG_SCSI_LOGGING=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -421,13 +451,11 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
@@ -438,17 +466,9 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -465,6 +485,7 @@ CONFIG_SCSI_QLA2XXX=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
@@ -505,6 +526,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -555,6 +577,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -652,6 +675,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -703,6 +727,7 @@ CONFIG_DRM_RADEON=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -753,11 +778,18 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -789,6 +821,7 @@ CONFIG_VIDEO_DEV=y
 #
 # Video Adapters
 #
+# CONFIG_VIDEO_ADV_DEBUG is not set
 # CONFIG_VIDEO_BT848 is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
@@ -796,14 +829,16 @@ CONFIG_VIDEO_DEV=y
 # CONFIG_TUNER_3036 is not set
 # CONFIG_VIDEO_STRADIS is not set
 # CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZR36120 is not set
 # CONFIG_VIDEO_SAA7134 is not set
 # CONFIG_VIDEO_MXB is not set
 # CONFIG_VIDEO_DPC is not set
 # CONFIG_VIDEO_HEXIUM_ORION is not set
 # CONFIG_VIDEO_HEXIUM_GEMINI is not set
 # CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_EM28XX is not set
 # CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
 
 #
 # Radio Adapters
@@ -824,7 +859,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
@@ -833,6 +867,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -848,10 +883,7 @@ CONFIG_FB_RADEON_DEBUG=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -860,6 +892,7 @@ CONFIG_FB_RADEON_DEBUG=y
 CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -892,6 +925,8 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -900,17 +935,18 @@ CONFIG_SND_SEQUENCER_OSS=y
 #
 CONFIG_SND_MPU401_UART=y
 CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -919,39 +955,39 @@ CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 CONFIG_SND_FM801=y
 CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -997,12 +1033,15 @@ CONFIG_USB_UHCI_HCD=y
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1014,13 +1053,15 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
@@ -1034,6 +1075,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1049,6 +1091,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_DABUSB is not set
 # CONFIG_USB_VICAM is not set
 # CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
 # CONFIG_USB_IBMCAM is not set
 # CONFIG_USB_KONICAWC is not set
 # CONFIG_USB_OV511 is not set
@@ -1113,7 +1156,7 @@ CONFIG_USB_MON=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -1135,6 +1178,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_INOTIFY is not set
@@ -1174,6 +1218,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1238,6 +1283,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1296,26 +1342,30 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+CONFIG_KPROBES=y
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-CONFIG_KPROBES=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 CONFIG_IA64_PRINT_HAZARDS=y

arch/ia64/defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:13:03 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:02:28 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,18 +60,37 @@ CONFIG_MODVERSIONS=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -89,14 +110,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_NUMA=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
 # CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=512
 CONFIG_HOTPLUG_CPU=y
@@ -110,19 +127,29 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -130,6 +157,7 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -144,6 +172,7 @@ CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -186,6 +215,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -220,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -232,14 +267,16 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -301,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -407,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -416,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
@@ -443,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -483,6 +510,7 @@ CONFIG_DM_MULTIPATH=m
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
 
@@ -523,6 +551,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -572,6 +601,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -676,12 +706,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -697,6 +730,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -710,6 +744,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_SGI_L1_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_SGI_IOC4=y
+# CONFIG_SERIAL_SGI_IOC3 is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -745,10 +780,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -756,12 +791,19 @@ CONFIG_MMTIMER=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -772,6 +814,7 @@ CONFIG_MMTIMER=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -822,26 +865,28 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
 #
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -850,40 +895,40 @@ CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
 CONFIG_SND_EMU10K1=m
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 CONFIG_SND_FM801=m
 # CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -929,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -946,12 +994,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -971,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1050,11 +1102,17 @@ CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
 
 #
 # SN Devices
 #
 CONFIG_SGI_IOC4=y
+CONFIG_SGI_IOC3=m
+
+#
+# EDAC - error detection and reporting (RAS)
+#
 
 #
 # File systems
@@ -1085,6 +1143,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1126,6 +1185,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1195,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1260,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # CONFIG_HP_SIMSCSI is not set
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set

arch/ia64/kernel/acpi.c

@@ -761,6 +761,59 @@ int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid)
 	return (0);
 }
 
+int additional_cpus __initdata = -1;
+
+static __init int setup_additional_cpus(char *s)
+{
+	if (s)
+		additional_cpus = simple_strtol(s, NULL, 0);
+
+	return 0;
+}
+
+early_param("additional_cpus", setup_additional_cpus);
+
+/*
+ * cpu_possible_map should be static, it cannot change as cpu's
+ * are onlined, or offlined. The reason is per-cpu data-structures
+ * are allocated by some modules at init time, and dont expect to
+ * do this dynamically on cpu arrival/departure.
+ * cpu_present_map on the other hand can change dynamically.
+ * In case when cpu_hotplug is not compiled, then we resort to current
+ * behaviour, which is cpu_possible == cpu_present.
+ * - Ashok Raj
+ *
+ * Three ways to find out the number of additional hotplug CPUs:
+ * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
+ * - The user can overwrite it with additional_cpus=NUM
+ * - Otherwise don't reserve additional CPUs.
+ */
+__init void prefill_possible_map(void)
+{
+	int i;
+	int possible, disabled_cpus;
+
+	disabled_cpus = total_cpus - available_cpus;
+
+ 	if (additional_cpus == -1) {
+ 		if (disabled_cpus > 0)
+			additional_cpus = disabled_cpus;
+ 		else
+			additional_cpus = 0;
+ 	}
+
+	possible = available_cpus + additional_cpus;
+
+	if (possible > NR_CPUS)
+		possible = NR_CPUS;
+
+	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
+		possible, max((possible - available_cpus), 0));
+
+	for (i = 0; i < possible; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
 int acpi_map_lsapic(acpi_handle handle, int *pcpu)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };

arch/ia64/kernel/cyclone.c

@@ -36,7 +36,7 @@ int __init init_cyclone_clock(void)
 	u32* volatile cyclone_timer;	/* Cyclone MPMC0 register */
 
 	if (!use_cyclone)
-		return -ENODEV;
+		return 0;
 
 	printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
 

arch/ia64/kernel/entry.S

@@ -569,7 +569,9 @@ GLOBAL_ENTRY(ia64_trace_syscall)
 .mem.offset 0,0; st8.spill [r2]=r8		// store return value in slot for r8
 .mem.offset 8,0; st8.spill [r3]=r10		// clear error indication in slot for r10
 	br.call.sptk.many rp=syscall_trace_leave // give parent a chance to catch return value
-.ret3:	br.cond.sptk .work_pending_syscall_end
+.ret3:
+(pUStk)	cmp.eq.unc p6,p0=r0,r0			// p6 <- pUStk
+	br.cond.sptk .work_pending_syscall_end
 
 strace_error:
 	ld8 r3=[r2]				// load pt_regs.r8

arch/ia64/kernel/fsys.S

@@ -878,8 +878,7 @@ fsyscall_table:
 	data8 0				// timer_delete
 	data8 0				// clock_settime
 	data8 fsys_clock_gettime	// clock_gettime
-	#define __NR_syscall_last	1255
 
-	.space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
-
-	.org fsyscall_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
+	// fill in zeros for the remaining entries
+	.zero:
+	.space fsyscall_table + 8*NR_syscalls - .zero, 0

arch/ia64/kernel/ia64_ksyms.c

@@ -10,23 +10,8 @@
 
 #include <linux/string.h>
 EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcmp);
 EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memscan);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strcpy);
 EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
-EXPORT_SYMBOL(strpbrk);
 
 #include <asm/checksum.h>
 EXPORT_SYMBOL(ip_fast_csum);		/* hand-coded assembly */

arch/ia64/kernel/ivt.S

@@ -561,11 +561,12 @@ ENTRY(dirty_bit)
 	;;					// avoid RAW on r18
 	mov ar.ccv=r18				// set compare value for cmpxchg
 	or r25=_PAGE_D|_PAGE_A,r18		// set the dirty and accessed bits
+	tbit.z p7,p6 = r18,_PAGE_P_BIT		// Check present bit
 	;;
-	cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6)	cmpxchg8.acq r26=[r17],r25,ar.ccv	// Only update if page is present
 	mov r24=PAGE_SHIFT<<2
 	;;
-	cmp.eq p6,p7=r26,r18
+(p6)	cmp.eq p6,p7=r26,r18			// Only compare if page is present
 	;;
 (p6)	itc.d r25				// install updated PTE
 	;;
@@ -626,11 +627,12 @@ ENTRY(iaccess_bit)
 	;;
 	mov ar.ccv=r18				// set compare value for cmpxchg
 	or r25=_PAGE_A,r18			// set the accessed bit
+	tbit.z p7,p6 = r18,_PAGE_P_BIT	 	// Check present bit
 	;;
-	cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6)	cmpxchg8.acq r26=[r17],r25,ar.ccv	// Only if page present
 	mov r24=PAGE_SHIFT<<2
 	;;
-	cmp.eq p6,p7=r26,r18
+(p6)	cmp.eq p6,p7=r26,r18			// Only if page present
 	;;
 (p6)	itc.i r25				// install updated PTE
 	;;
@@ -680,11 +682,12 @@ ENTRY(daccess_bit)
 	;;					// avoid RAW on r18
 	mov ar.ccv=r18				// set compare value for cmpxchg
 	or r25=_PAGE_A,r18			// set the dirty bit
+	tbit.z p7,p6 = r18,_PAGE_P_BIT		// Check present bit
 	;;
-	cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6)	cmpxchg8.acq r26=[r17],r25,ar.ccv	// Only if page is present
 	mov r24=PAGE_SHIFT<<2
 	;;
-	cmp.eq p6,p7=r26,r18
+(p6)	cmp.eq p6,p7=r26,r18			// Only if page is present
 	;;
 (p6)	itc.d r25				// install updated PTE
 	/*
@@ -1362,7 +1365,6 @@ END(debug_vector)
 // 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57)
 ENTRY(unaligned_access)
 	DBG_FAULT(30)
-	mov r16=cr.ipsr
 	mov r31=pr		// prepare to save predicates
 	;;
 	br.sptk.many dispatch_unaligned_handler

arch/ia64/kernel/mca_drv.c

@@ -123,8 +123,9 @@ mca_page_isolate(unsigned long paddr)
 void
 mca_handler_bh(unsigned long paddr)
 {
-	printk(KERN_DEBUG "OS_MCA: process [pid: %d](%s) encounters MCA.\n",
-		current->pid, current->comm);
+	printk(KERN_ERR
+		"OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n",
+		current->pid, current->comm, paddr);
 
 	spin_lock(&mca_bh_lock);
 	switch (mca_page_isolate(paddr)) {
@@ -132,7 +133,7 @@ mca_handler_bh(unsigned long paddr)
 		printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr);
 		break;
 	case ISOLATE_NG:
-		printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr);
+		printk(KERN_CRIT "Page isolation: ( %lx ) failure.\n", paddr);
 		break;
 	default:
 		break;
@@ -567,10 +568,15 @@ recover_from_processor_error(int platform, slidx_table_t *slidx,
 		return 0;
 
 	/*
-	 * If there is no bus error, record is weird but we need not to recover.
+	 * The cache check and bus check bits have four possible states
+	 *   cc bc
+	 *    0  0	Weird record, not recovered
+	 *    1  0	Cache error, not recovered
+	 *    0  1	I/O error, attempt recovery
+	 *    1  1	Memory error, attempt recovery
 	 */
 	if (psp->bc == 0 || pbci == NULL)
-		return 1;
+		return 0;
 
 	/*
 	 * Sorry, we cannot handle so many.

arch/ia64/kernel/setup.c

@@ -430,6 +430,7 @@ setup_arch (char **cmdline_p)
 	if (early_console_setup(*cmdline_p) == 0)
 		mark_bsp_online();
 
+	parse_early_param();
 #ifdef CONFIG_ACPI
 	/* Initialize the ACPI boot-time table parser */
 	acpi_table_init();
@@ -688,6 +689,9 @@ void
 setup_per_cpu_areas (void)
 {
 	/* start_kernel() requires this... */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
 }
 
 /*

arch/ia64/kernel/smpboot.c

@@ -129,7 +129,7 @@ DEFINE_PER_CPU(int, cpu_state);
 /* Bitmasks of currently online, and possible CPUs */
 cpumask_t cpu_online_map;
 EXPORT_SYMBOL(cpu_online_map);
-cpumask_t cpu_possible_map;
+cpumask_t cpu_possible_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_possible_map);
 
 cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
@@ -506,9 +506,6 @@ smp_build_cpu_map (void)
 
 	for (cpu = 0; cpu < NR_CPUS; cpu++) {
 		ia64_cpu_to_sapicid[cpu] = -1;
-#ifdef CONFIG_HOTPLUG_CPU
-		cpu_set(cpu, cpu_possible_map);
-#endif
 	}
 
 	ia64_cpu_to_sapicid[0] = boot_cpu_id;

arch/ia64/kernel/time.c

@@ -250,32 +250,27 @@ time_init (void)
 	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 }
 
-#define SMALLUSECS 100
-
-void
-udelay (unsigned long usecs)
+/*
+ * Generic udelay assumes that if preemption is allowed and the thread
+ * migrates to another CPU, that the ITC values are synchronized across
+ * all CPUs.
+ */
+static void
+ia64_itc_udelay (unsigned long usecs)
 {
-	unsigned long start;
-	unsigned long cycles;
-	unsigned long smallusecs;
+	unsigned long start = ia64_get_itc();
+	unsigned long end = start + usecs*local_cpu_data->cyc_per_usec;
 
-	/*
-	 * Execute the non-preemptible delay loop (because the ITC might
-	 * not be synchronized between CPUS) in relatively short time
-	 * chunks, allowing preemption between the chunks.
-	 */
-	while (usecs > 0) {
-		smallusecs = (usecs > SMALLUSECS) ? SMALLUSECS : usecs;
-		preempt_disable();
-		cycles = smallusecs*local_cpu_data->cyc_per_usec;
-		start = ia64_get_itc();
+	while (time_before(ia64_get_itc(), end))
+		cpu_relax();
+}
 
-		while (ia64_get_itc() - start < cycles)
-			cpu_relax();
+void (*ia64_udelay)(unsigned long usecs) = &ia64_itc_udelay;
 
-		preempt_enable();
-		usecs -= smallusecs;
-	}
+void
+udelay (unsigned long usecs)
+{
+	(*ia64_udelay)(usecs);
 }
 EXPORT_SYMBOL(udelay);
 

arch/ia64/kernel/traps.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>       /* for EXPORT_SYMBOL */
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
+#include <linux/delay.h>		/* for ssleep() */
 
 #include <asm/fpswa.h>
 #include <asm/ia32.h>
@@ -116,6 +117,13 @@ die (const char *str, struct pt_regs *regs, long err)
 	bust_spinlocks(0);
 	die.lock_owner = -1;
 	spin_unlock_irq(&die.lock);
+
+	if (panic_on_oops) {
+		printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+		ssleep(5);
+		panic("Fatal exception");
+	}
+
   	do_exit(SIGSEGV);
 }
 

arch/ia64/kernel/unaligned.c

@@ -24,7 +24,7 @@
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
-extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(char *str, struct pt_regs *regs, long err);
 
 #undef DEBUG_UNALIGNED_TRAP
 
@@ -52,6 +52,15 @@ dump (const char *str, void *vp, size_t len)
 #define IA64_FIRST_ROTATING_FR	32
 #define SIGN_EXT9		0xffffffffffffff00ul
 
+/*
+ *  sysctl settable hook which tells the kernel whether to honor the
+ *  IA64_THREAD_UAC_NOPRINT prctl.  Because this is user settable, we want
+ *  to allow the super user to enable/disable this for security reasons
+ *  (i.e. don't allow attacker to fill up logs with unaligned accesses).
+ */
+int no_unaligned_warning;
+static int noprint_warning;
+
 /*
  * For M-unit:
  *
@@ -1324,8 +1333,9 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 		if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0)
 			goto force_sigbus;
 
-		if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT)
-		    && within_logging_rate_limit())
+		if (!no_unaligned_warning &&
+		    !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
+		    within_logging_rate_limit())
 		{
 			char buf[200];	/* comm[] is at most 16 bytes... */
 			size_t len;
@@ -1340,7 +1350,22 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			if (user_mode(regs))
 				tty_write_message(current->signal->tty, buf);
 			buf[len-1] = '\0';	/* drop '\r' */
-			printk(KERN_WARNING "%s", buf);	/* watch for command names containing %s */
+			/* watch for command names containing %s */
+			printk(KERN_WARNING "%s", buf);
+		} else {
+			if (no_unaligned_warning && !noprint_warning) {
+				noprint_warning = 1;
+				printk(KERN_WARNING "%s(%d) encountered an "
+				       "unaligned exception which required\n"
+				       "kernel assistance, which degrades "
+				       "the performance of the application.\n"
+				       "Unaligned exception warnings have "
+				       "been disabled by the system "
+				       "administrator\n"
+				       "echo 0 > /proc/sys/kernel/ignore-"
+				       "unaligned-usertrap to re-enable\n",
+				       current->comm, current->pid);
+			}
 		}
 	} else {
 		if (within_logging_rate_limit())

arch/ia64/pci/pci.c

@@ -579,7 +579,7 @@ pcibios_align_resource (void *data, struct resource *res,
 char * __init
 pcibios_setup (char *str)
 {
-	return NULL;
+	return str;
 }
 
 int

arch/ia64/sn/kernel/io_init.c

@@ -23,6 +23,10 @@
 #include "xtalk/hubdev.h"
 #include "xtalk/xwidgetdev.h"
 
+
+extern void sn_init_cpei_timer(void);
+extern void register_sn_procfs(void);
+
 static struct list_head sn_sysdata_list;
 
 /* sysdata list struct */
@@ -40,12 +44,12 @@ struct brick {
 	struct slab_info slab_info[MAX_SLABS + 1];
 };
 
-int sn_ioif_inited = 0;		/* SN I/O infrastructure initialized? */
+int sn_ioif_inited;		/* SN I/O infrastructure initialized? */
 
 struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES];	/* indexed by asic type */
 
-static int max_segment_number = 0; /* Default highest segment number */
-static int max_pcibus_number = 255; /* Default highest pci bus number */
+static int max_segment_number;		 /* Default highest segment number */
+static int max_pcibus_number = 255;	/* Default highest pci bus number */
 
 /*
  * Hooks and struct for unsupported pci providers
@@ -84,7 +88,6 @@ static inline u64
 sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
 			     u64 address)
 {
-
 	struct ia64_sal_retval ret_stuff;
 	ret_stuff.status = 0;
 	ret_stuff.v0 = 0;
@@ -94,7 +97,6 @@ sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
 			(u64) nasid, (u64) widget_num,
 			(u64) device_num, (u64) address, 0, 0, 0);
 	return ret_stuff.status;
-
 }
 
 /*
@@ -102,7 +104,6 @@ sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
  */
 static inline u64 sal_get_hubdev_info(u64 handle, u64 address)
 {
-
 	struct ia64_sal_retval ret_stuff;
 	ret_stuff.status = 0;
 	ret_stuff.v0 = 0;
@@ -118,7 +119,6 @@ static inline u64 sal_get_hubdev_info(u64 handle, u64 address)
  */
 static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address)
 {
-
 	struct ia64_sal_retval ret_stuff;
 	ret_stuff.status = 0;
 	ret_stuff.v0 = 0;
@@ -215,7 +215,7 @@ static void __init sn_fixup_ionodes(void)
 	struct hubdev_info *hubdev;
 	u64 status;
 	u64 nasid;
-	int i, widget, device;
+	int i, widget, device, size;
 
 	/*
 	 * Get SGI Specific HUB chipset information.
@@ -251,48 +251,37 @@ static void __init sn_fixup_ionodes(void)
 		if (!hubdev->hdi_flush_nasid_list.widget_p)
 			continue;
 
+		size = (HUB_WIDGET_ID_MAX + 1) *
+			sizeof(struct sn_flush_device_kernel *);
 		hubdev->hdi_flush_nasid_list.widget_p =
-		    kmalloc((HUB_WIDGET_ID_MAX + 1) *
-			    sizeof(struct sn_flush_device_kernel *),
-			    GFP_KERNEL);
-		memset(hubdev->hdi_flush_nasid_list.widget_p, 0x0,
-		       (HUB_WIDGET_ID_MAX + 1) *
-		       sizeof(struct sn_flush_device_kernel *));
+			kzalloc(size, GFP_KERNEL);
+		if (!hubdev->hdi_flush_nasid_list.widget_p)
+			BUG();
 
 		for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) {
-			sn_flush_device_kernel = kmalloc(DEV_PER_WIDGET *
-						         sizeof(struct
-						        sn_flush_device_kernel),
-						        GFP_KERNEL);
+			size = DEV_PER_WIDGET *
+				sizeof(struct sn_flush_device_kernel);
+			sn_flush_device_kernel = kzalloc(size, GFP_KERNEL);
 			if (!sn_flush_device_kernel)
 				BUG();
-			memset(sn_flush_device_kernel, 0x0,
-			       DEV_PER_WIDGET *
-			       sizeof(struct sn_flush_device_kernel));
 
 			dev_entry = sn_flush_device_kernel;
 			for (device = 0; device < DEV_PER_WIDGET;
 			     device++,dev_entry++) {
-				dev_entry->common = kmalloc(sizeof(struct
-					      	        sn_flush_device_common),
-					                    GFP_KERNEL);
+				size = sizeof(struct sn_flush_device_common);
+				dev_entry->common = kzalloc(size, GFP_KERNEL);
 				if (!dev_entry->common)
 					BUG();
-				memset(dev_entry->common, 0x0, sizeof(struct
-					     	       sn_flush_device_common));
 
 				if (sn_prom_feature_available(
 						       PRF_DEVICE_FLUSH_LIST))
 					status = sal_get_device_dmaflush_list(
-									  nasid,
-									 widget,
-								       	 device,
-						      (u64)(dev_entry->common));
+						     nasid, widget, device,
+						     (u64)(dev_entry->common));
 				else
 					status = sn_device_fixup_war(nasid,
-								     widget,
-							    	     device,
-							     dev_entry->common);
+						     widget, device,
+						     dev_entry->common);
 				if (status != SALRET_OK)
 					panic("SAL call failed: %s\n",
 					      ia64_sal_strerror(status));
@@ -383,13 +372,12 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
 
 	pci_dev_get(dev); /* for the sysdata pointer */
 	pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
-	if (pcidev_info <= 0)
+	if (!pcidev_info)
 		BUG();		/* Cannot afford to run out of memory */
 
-	sn_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
-	if (sn_irq_info <= 0)
+	sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
+	if (!sn_irq_info)
 		BUG();		/* Cannot afford to run out of memory */
-	memset(sn_irq_info, 0, sizeof(struct sn_irq_info));
 
 	/* Call to retrieve pci device information needed by kernel. */
 	status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, 
@@ -482,13 +470,13 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
  */
 void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 {
-	int status = 0;
+	int status;
 	int nasid, cnode;
 	struct pci_controller *controller;
 	struct sn_pci_controller *sn_controller;
 	struct pcibus_bussoft *prom_bussoft_ptr;
 	struct hubdev_info *hubdev_info;
-	void *provider_soft = NULL;
+	void *provider_soft;
 	struct sn_pcibus_provider *provider;
 
  	status = sal_get_pcibus_info((u64) segment, (u64) busnum,
@@ -535,6 +523,8 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 	bus->sysdata = controller;
 	if (provider->bus_fixup)
 		provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller);
+	else
+		provider_soft = NULL;
 
 	if (provider_soft == NULL) {
 		/* fixup failed or not applicable */
@@ -638,13 +628,8 @@ void sn_bus_free_sysdata(void)
 
 static int __init sn_pci_init(void)
 {
-	int i = 0;
-	int j = 0;
+	int i, j;
 	struct pci_dev *pci_dev = NULL;
-	extern void sn_init_cpei_timer(void);
-#ifdef CONFIG_PROC_FS
-	extern void register_sn_procfs(void);
-#endif
 
 	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
 		return 0;
@@ -700,32 +685,29 @@ static int __init sn_pci_init(void)
  */
 void hubdev_init_node(nodepda_t * npda, cnodeid_t node)
 {
-
 	struct hubdev_info *hubdev_info;
+	int size;
+	pg_data_t *pg;
+
+	size = sizeof(struct hubdev_info);
 
 	if (node >= num_online_nodes())	/* Headless/memless IO nodes */
-		hubdev_info =
-		    (struct hubdev_info *)alloc_bootmem_node(NODE_DATA(0),
-							     sizeof(struct
-								    hubdev_info));
+		pg = NODE_DATA(0);
 	else
-		hubdev_info =
-		    (struct hubdev_info *)alloc_bootmem_node(NODE_DATA(node),
-							     sizeof(struct
-								    hubdev_info));
-	npda->pdinfo = (void *)hubdev_info;
+		pg = NODE_DATA(node);
 
+	hubdev_info = (struct hubdev_info *)alloc_bootmem_node(pg, size);
+
+	npda->pdinfo = (void *)hubdev_info;
 }
 
 geoid_t
 cnodeid_get_geoid(cnodeid_t cnode)
 {
-
 	struct hubdev_info *hubdev;
 
 	hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
 	return hubdev->hdi_geoid;
-
 }
 
 subsys_initcall(sn_pci_init);

arch/ia64/sn/kernel/setup.c

@@ -75,7 +75,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second);
 DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
 EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
 
-DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_NUMNODES]);
+DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
 EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
 
 DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
@@ -317,6 +317,7 @@ struct pcdp_vga_device {
 #define PCDP_PCI_TRANS_IOPORT	0x02
 #define PCDP_PCI_TRANS_MMIO	0x01
 
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 static void
 sn_scan_pcdp(void)
 {
@@ -358,6 +359,7 @@ sn_scan_pcdp(void)
 		break; /* once we find the primary, we're done */
 	}
 }
+#endif
 
 static unsigned long sn2_rtc_initial;
 

arch/ia64/sn/kernel/sn2/prominfo_proc.c

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1999,2001-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999,2001-2004, 2006 Silicon Graphics, Inc.  All Rights Reserved.
  *
  * Module to export the system's Firmware Interface Tables, including
  * PROM revision numbers and banners, in /proc
@@ -190,7 +190,7 @@ static int
 read_version_entry(char *page, char **start, off_t off, int count, int *eof,
 		   void *data)
 {
-	int len = 0;
+	int len;
 
 	/* data holds the NASID of the node */
 	len = dump_version(page, (unsigned long)data);
@@ -202,7 +202,7 @@ static int
 read_fit_entry(char *page, char **start, off_t off, int count, int *eof,
 	       void *data)
 {
-	int len = 0;
+	int len;
 
 	/* data holds the NASID of the node */
 	len = dump_fit(page, (unsigned long)data);
@@ -229,13 +229,16 @@ int __init prominfo_init(void)
 	struct proc_dir_entry *p;
 	cnodeid_t cnodeid;
 	unsigned long nasid;
+	int size;
 	char name[NODE_NAME_LEN];
 
 	if (!ia64_platform_is("sn2"))
 		return 0;
 
-	proc_entries = kmalloc(num_online_nodes() * sizeof(struct proc_dir_entry *),
-			       GFP_KERNEL);
+	size = num_online_nodes() * sizeof(struct proc_dir_entry *);
+	proc_entries = kzalloc(size, GFP_KERNEL);
+	if (!proc_entries)
+		return -ENOMEM;
 
 	sgi_prominfo_entry = proc_mkdir("sgi_prominfo", NULL);
 
@@ -244,14 +247,12 @@ int __init prominfo_init(void)
 		sprintf(name, "node%d", cnodeid);
 		*entp = proc_mkdir(name, sgi_prominfo_entry);
 		nasid = cnodeid_to_nasid(cnodeid);
-		p = create_proc_read_entry(
-			"fit", 0, *entp, read_fit_entry,
-			(void *)nasid);
+		p = create_proc_read_entry("fit", 0, *entp, read_fit_entry,
+					   (void *)nasid);
 		if (p)
 			p->owner = THIS_MODULE;
-		p = create_proc_read_entry(
-			"version", 0, *entp, read_version_entry,
-			(void *)nasid);
+		p = create_proc_read_entry("version", 0, *entp,
+					   read_version_entry, (void *)nasid);
 		if (p)
 			p->owner = THIS_MODULE;
 		entp++;
@@ -263,7 +264,7 @@ int __init prominfo_init(void)
 void __exit prominfo_exit(void)
 {
 	struct proc_dir_entry **entp;
-	unsigned cnodeid;
+	unsigned int cnodeid;
 	char name[NODE_NAME_LEN];
 
 	entp = proc_entries;

arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -46,8 +46,14 @@ DECLARE_PER_CPU(struct ptc_stats, ptcstats);
 
 static  __cacheline_aligned DEFINE_SPINLOCK(sn2_global_ptc_lock);
 
-void sn2_ptc_deadlock_recovery(short *, short, short, int, volatile unsigned long *, unsigned long,
-	volatile unsigned long *, unsigned long);
+extern unsigned long
+sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
+			       volatile unsigned long *, unsigned long,
+			       volatile unsigned long *, unsigned long);
+void
+sn2_ptc_deadlock_recovery(short *, short, short, int,
+			  volatile unsigned long *, unsigned long,
+			  volatile unsigned long *, unsigned long);
 
 /*
  * Note: some is the following is captured here to make degugging easier
@@ -59,16 +65,6 @@ void sn2_ptc_deadlock_recovery(short *, short, short, int, volatile unsigned lon
 #define reset_max_active_on_deadlock()	1
 #define PTC_LOCK(sh1)			((sh1) ? &sn2_global_ptc_lock : &sn_nodepda->ptc_lock)
 
-static inline void ptc_lock(int sh1, unsigned long *flagp)
-{
-	spin_lock_irqsave(PTC_LOCK(sh1), *flagp);
-}
-
-static inline void ptc_unlock(int sh1, unsigned long flags)
-{
-	spin_unlock_irqrestore(PTC_LOCK(sh1), flags);
-}
-
 struct ptc_stats {
 	unsigned long ptc_l;
 	unsigned long change_rid;
@@ -82,6 +78,8 @@ struct ptc_stats {
 	unsigned long shub_ptc_flushes_not_my_mm;
 };
 
+#define sn2_ptctest	0
+
 static inline unsigned long wait_piowc(void)
 {
 	volatile unsigned long *piows;
@@ -200,7 +198,7 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
 	max_active = max_active_pio(shub1);
 
 	itc = ia64_get_itc();
-	ptc_lock(shub1, &flags);
+	spin_lock_irqsave(PTC_LOCK(shub1), flags);
 	itc2 = ia64_get_itc();
 
 	__get_cpu_var(ptcstats).lock_itc_clocks += itc2 - itc;
@@ -258,7 +256,7 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
 		ia64_srlz_d();
 	}
 
-	ptc_unlock(shub1, flags);
+	spin_unlock_irqrestore(PTC_LOCK(shub1), flags);
 
 	preempt_enable();
 }
@@ -270,11 +268,12 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
  * TLB flush transaction.  The recovery sequence is somewhat tricky & is
  * coded in assembly language.
  */
-void sn2_ptc_deadlock_recovery(short *nasids, short ib, short ie, int mynasid, volatile unsigned long *ptc0, unsigned long data0,
-	volatile unsigned long *ptc1, unsigned long data1)
+
+void
+sn2_ptc_deadlock_recovery(short *nasids, short ib, short ie, int mynasid,
+			  volatile unsigned long *ptc0, unsigned long data0,
+			  volatile unsigned long *ptc1, unsigned long data1)
 {
-	extern unsigned long sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
-	        volatile unsigned long *, unsigned long, volatile unsigned long *, unsigned long);
 	short nasid, i;
 	unsigned long *piows, zeroval, n;
 
@@ -447,7 +446,7 @@ static struct proc_dir_entry *proc_sn2_ptc;
 static int __init sn2_ptc_init(void)
 {
 	if (!ia64_platform_is("sn2"))
-		return -ENOSYS;
+		return 0;
 
 	if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) {
 		printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME);

arch/ia64/sn/kernel/sn2/sn_proc_fs.c

@@ -6,11 +6,11 @@
  * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
  */
 #include <linux/config.h>
-#include <asm/uaccess.h>
 
 #ifdef CONFIG_PROC_FS
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <asm/uaccess.h>
 #include <asm/sn/sn_sal.h>
 
 static int partition_id_show(struct seq_file *s, void *p)
@@ -90,10 +90,10 @@ static int coherence_id_open(struct inode *inode, struct file *file)
 	return single_open(file, coherence_id_show, NULL);
 }
 
-static struct proc_dir_entry *sn_procfs_create_entry(
-	const char *name, struct proc_dir_entry *parent,
-	int (*openfunc)(struct inode *, struct file *),
-	int (*releasefunc)(struct inode *, struct file *))
+static struct proc_dir_entry
+*sn_procfs_create_entry(const char *name, struct proc_dir_entry *parent,
+			int (*openfunc)(struct inode *, struct file *),
+			int (*releasefunc)(struct inode *, struct file *))
 {
 	struct proc_dir_entry *e = create_proc_entry(name, 0444, parent);
 
@@ -126,24 +126,24 @@ void register_sn_procfs(void)
 		return;
 
 	sn_procfs_create_entry("partition_id", sgi_proc_dir,
-		partition_id_open, single_release);
+			       partition_id_open, single_release);
 
 	sn_procfs_create_entry("system_serial_number", sgi_proc_dir,
-		system_serial_number_open, single_release);
+			       system_serial_number_open, single_release);
 
 	sn_procfs_create_entry("licenseID", sgi_proc_dir, 
-		licenseID_open, single_release);
+			       licenseID_open, single_release);
 
 	e = sn_procfs_create_entry("sn_force_interrupt", sgi_proc_dir, 
-		sn_force_interrupt_open, single_release);
+				   sn_force_interrupt_open, single_release);
 	if (e) 
 		e->proc_fops->write = sn_force_interrupt_write_proc;
 
 	sn_procfs_create_entry("coherence_id", sgi_proc_dir, 
-		coherence_id_open, single_release);
+			       coherence_id_open, single_release);
 	
 	sn_procfs_create_entry("sn_topology", sgi_proc_dir,
-		sn_topology_open, sn_topology_release);
+			       sn_topology_open, sn_topology_release);
 }
 
 #endif /* CONFIG_PROC_FS */

arch/ia64/sn/kernel/sn2/timer.c

@@ -14,6 +14,7 @@
 
 #include <asm/hw_irq.h>
 #include <asm/system.h>
+#include <asm/timex.h>
 
 #include <asm/sn/leds.h>
 #include <asm/sn/shub_mmr.h>
@@ -28,9 +29,27 @@ static struct time_interpolator sn2_interpolator = {
 	.source = TIME_SOURCE_MMIO64
 };
 
+/*
+ * sn udelay uses the RTC instead of the ITC because the ITC is not
+ * synchronized across all CPUs, and the thread may migrate to another CPU
+ * if preemption is enabled.
+ */
+static void
+ia64_sn_udelay (unsigned long usecs)
+{
+	unsigned long start = rtc_time();
+	unsigned long end = start +
+			usecs * sn_rtc_cycles_per_second / 1000000;
+
+	while (time_before((unsigned long)rtc_time(), end))
+		cpu_relax();
+}
+
 void __init sn_timer_init(void)
 {
 	sn2_interpolator.frequency = sn_rtc_cycles_per_second;
 	sn2_interpolator.addr = RTC_COUNTER_ADDR;
 	register_time_interpolator(&sn2_interpolator);
+
+	ia64_udelay = &ia64_sn_udelay;
 }

arch/ia64/sn/kernel/sn2/timer_interrupt.c

@@ -1,7 +1,7 @@
 /*
  *
  *
- * Copyright (c) 2005 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2005, 2006 Silicon Graphics, Inc.  All Rights Reserved.
  * 
  * This program is free software; you can redistribute it and/or modify it 
  * under the terms of version 2 of the GNU General Public License 
@@ -22,11 +22,6 @@
  * License along with this program; if not, write the Free Software 
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  * 
- * Contact information:  Silicon Graphics, Inc., 1600 Amphitheatre Pkwy, 
- * Mountain View, CA  94043, or:
- * 
- * http://www.sgi.com 
- * 
  * For further information regarding this notice, see: 
  * 
  * http://oss.sgi.com/projects/GenInfo/NoticeExplan