Staging: et131x: Clean up MII control

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/et131x/et1310_address_map.h

@@ -1407,97 +1407,46 @@ typedef struct _RXMAC_t {				/* Location: */
 /*
  * structure for MII Management Command reg in mac address map.
  * located at address 0x5024
+ * bit 1: scan cycle
+ * bit 0: read cycle
  */
-typedef union _MII_MGMT_CMD_t {
-	u32 value;
-	struct {
-#ifdef _BIT_FIELDS_HTOL
-		u32 reserved:30;	/* bits 2-31 */
-		u32 scan_cycle:1;	/* bit 1 */
-		u32 read_cycle:1;	/* bit 0 */
-#else
-		u32 read_cycle:1;	/* bit 0 */
-		u32 scan_cycle:1;	/* bit 1 */
-		u32 reserved:30;	/* bits 2-31 */
-#endif
-	} bits;
-} MII_MGMT_CMD_t, *PMII_MGMT_CMD_t;
 
 /*
  * structure for MII Management Address reg in mac address map.
  * located at address 0x5028
+ * 31-13: reserved
+ * 12-8: phy addr
+ * 7-5: reserved
+ * 4-0: register
  */
-typedef union _MII_MGMT_ADDR_t {
-	u32 value;
-	struct {
-#ifdef _BIT_FIELDS_HTOL
-		u32 reserved2:19;	/* bit 13-31 */
-		u32 phy_addr:5;	/* bits 8-12 */
-		u32 reserved1:3;	/* bits 5-7 */
-		u32 reg_addr:5;	/* bits 0-4 */
-#else
-		u32 reg_addr:5;	/* bits 0-4 */
-		u32 reserved1:3;	/* bits 5-7 */
-		u32 phy_addr:5;	/* bits 8-12 */
-		u32 reserved2:19;	/* bit 13-31 */
-#endif
-	} bits;
-} MII_MGMT_ADDR_t, *PMII_MGMT_ADDR_t;
+
+#define MII_ADDR(phy,reg)	((phy) << 8 | (reg))
 
 /*
  * structure for MII Management Control reg in mac address map.
  * located at address 0x502C
+ * 31-16: reserved
+ * 15-0: phy control
  */
-typedef union _MII_MGMT_CTRL_t {
-	u32 value;
-	struct {
-#ifdef _BIT_FIELDS_HTOL
-		u32 reserved:16;	/* bits 16-31 */
-		u32 phy_ctrl:16;	/* bits 0-15 */
-#else
-		u32 phy_ctrl:16;	/* bits 0-15 */
-		u32 reserved:16;	/* bits 16-31 */
-#endif
-	} bits;
-} MII_MGMT_CTRL_t, *PMII_MGMT_CTRL_t;
 
 /*
  * structure for MII Management Status reg in mac address map.
  * located at address 0x5030
+ * 31-16: reserved
+ * 15-0: phy control
  */
-typedef union _MII_MGMT_STAT_t {
-	u32 value;
-	struct {
-#ifdef _BIT_FIELDS_HTOL
-		u32 reserved:16;	/* bits 16-31 */
-		u32 phy_stat:16;	/* bits 0-15 */
-#else
-		u32 phy_stat:16;	/* bits 0-15 */
-		u32 reserved:16;	/* bits 16-31 */
-#endif
-	} bits;
-} MII_MGMT_STAT_t, *PMII_MGMT_STAT_t;
 
 /*
  * structure for MII Management Indicators reg in mac address map.
  * located at address 0x5034
+ * 31-3: reserved
+ * 2: not valid
+ * 1: scanning
+ * 0: busy
  */
-typedef union _MII_MGMT_INDICATOR_t {
-	u32 value;
-	struct {
-#ifdef _BIT_FIELDS_HTOL
-		u32 reserved:29;	/* bits 3-31 */
-		u32 not_valid:1;	/* bit 2 */
-		u32 scanning:1;	/* bit 1 */
-		u32 busy:1;	/* bit 0 */
-#else
-		u32 busy:1;	/* bit 0 */
-		u32 scanning:1;	/* bit 1 */
-		u32 not_valid:1;	/* bit 2 */
-		u32 reserved:29;	/* bits 3-31 */
-#endif
-	} bits;
-} MII_MGMT_INDICATOR_t, *PMII_MGMT_INDICATOR_t;
+
+#define MGMT_BUSY	0x00000001	/* busy */
+#define MGMT_WAIT	0x00000005	/* busy | not valid */
 
 /*
  * structure for Interface Control reg in mac address map.
@@ -1634,11 +1583,11 @@ typedef struct _MAC_t {					/* Location: */
 	u32 rsv2;					/*  0x5018 */
 	u32 mac_test;					/*  0x501C */
 	u32 mii_mgmt_cfg;				/*  0x5020 */
-	MII_MGMT_CMD_t mii_mgmt_cmd;			/*  0x5024 */
-	MII_MGMT_ADDR_t mii_mgmt_addr;			/*  0x5028 */
-	MII_MGMT_CTRL_t mii_mgmt_ctrl;			/*  0x502C */
-	MII_MGMT_STAT_t mii_mgmt_stat;			/*  0x5030 */
-	MII_MGMT_INDICATOR_t mii_mgmt_indicator;	/*  0x5034 */
+	u32 mii_mgmt_cmd;				/*  0x5024 */
+	u32 mii_mgmt_addr;				/*  0x5028 */
+	u32 mii_mgmt_ctrl;				/*  0x502C */
+	u32 mii_mgmt_stat;				/*  0x5030 */
+	u32 mii_mgmt_indicator;				/*  0x5034 */
 	MAC_IF_CTRL_t if_ctrl;				/*  0x5038 */
 	MAC_IF_STAT_t if_stat;				/*  0x503C */
 	MAC_STATION_ADDR1_t station_addr_1;		/*  0x5040 */

drivers/staging/et131x/et1310_phy.c

@@ -115,69 +115,55 @@ int PhyMiRead(struct et131x_adapter *adapter, uint8_t xcvrAddr,
 	struct _MAC_t __iomem *mac = &adapter->regs->mac;
 	int status = 0;
 	uint32_t delay;
-	MII_MGMT_ADDR_t miiAddr;
-	MII_MGMT_CMD_t miiCmd;
-	MII_MGMT_INDICATOR_t miiIndicator;
+	u32 miiAddr;
+	u32 miiCmd;
+	u32 miiIndicator;
 
 	/* Save a local copy of the registers we are dealing with so we can
 	 * set them back
 	 */
-	miiAddr.value = readl(&mac->mii_mgmt_addr.value);
-	miiCmd.value = readl(&mac->mii_mgmt_cmd.value);
+	miiAddr = readl(&mac->mii_mgmt_addr);
+	miiCmd = readl(&mac->mii_mgmt_cmd);
 
 	/* Stop the current operation */
-	writel(0, &mac->mii_mgmt_cmd.value);
+	writel(0, &mac->mii_mgmt_cmd);
 
 	/* Set up the register we need to read from on the correct PHY */
-	{
-		MII_MGMT_ADDR_t mii_mgmt_addr = { 0 };
-
-		mii_mgmt_addr.bits.phy_addr = xcvrAddr;
-		mii_mgmt_addr.bits.reg_addr = xcvrReg;
-		writel(mii_mgmt_addr.value, &mac->mii_mgmt_addr.value);
-	}
+	writel(MII_ADDR(xcvrAddr, xcvrReg), &mac->mii_mgmt_addr);
 
 	/* Kick the read cycle off */
 	delay = 0;
 
-	writel(0x1, &mac->mii_mgmt_cmd.value);
+	writel(0x1, &mac->mii_mgmt_cmd);
 
 	do {
 		udelay(50);
 		delay++;
-		miiIndicator.value = readl(&mac->mii_mgmt_indicator.value);
-	} while ((miiIndicator.bits.not_valid || miiIndicator.bits.busy) &&
-		 delay < 50);
+		miiIndicator = readl(&mac->mii_mgmt_indicator);
+	} while ((miiIndicator & MGMT_WAIT) && delay < 50);
 
 	/* If we hit the max delay, we could not read the register */
-	if (delay >= 50) {
+	if (delay == 50) {
 		dev_warn(&adapter->pdev->dev,
 			    "xcvrReg 0x%08x could not be read\n", xcvrReg);
 		dev_warn(&adapter->pdev->dev, "status is  0x%08x\n",
-			    miiIndicator.value);
+			    miiIndicator);
 
 		status = -EIO;
 	}
 
 	/* If we hit here we were able to read the register and we need to
-	 * return the value to the caller
-	 */
-	/* TODO: make this stuff a simple readw()?! */
-	{
-		MII_MGMT_STAT_t mii_mgmt_stat;
-
-		mii_mgmt_stat.value = readl(&mac->mii_mgmt_stat.value);
-		*value = (uint16_t) mii_mgmt_stat.bits.phy_stat;
-	}
+	 * return the value to the caller */
+	*value = readl(&mac->mii_mgmt_stat) & 0xFFFF;
 
 	/* Stop the read operation */
-	writel(0, &mac->mii_mgmt_cmd.value);
+	writel(0, &mac->mii_mgmt_cmd);
 
 	/* set the registers we touched back to the state at which we entered
 	 * this function
 	 */
-	writel(miiAddr.value, &mac->mii_mgmt_addr.value);
-	writel(miiCmd.value, &mac->mii_mgmt_cmd.value);
+	writel(miiAddr, &mac->mii_mgmt_addr);
+	writel(miiCmd, &mac->mii_mgmt_cmd);
 
 	return status;
 }
@@ -196,37 +182,31 @@ int MiWrite(struct et131x_adapter *adapter, uint8_t xcvrReg, uint16_t value)
 	int status = 0;
 	uint8_t xcvrAddr = adapter->Stats.xcvr_addr;
 	uint32_t delay;
-	MII_MGMT_ADDR_t miiAddr;
-	MII_MGMT_CMD_t miiCmd;
-	MII_MGMT_INDICATOR_t miiIndicator;
+	u32 miiAddr;
+	u32 miiCmd;
+	u32 miiIndicator;
 
 	/* Save a local copy of the registers we are dealing with so we can
 	 * set them back
 	 */
-	miiAddr.value = readl(&mac->mii_mgmt_addr.value);
-	miiCmd.value = readl(&mac->mii_mgmt_cmd.value);
+	miiAddr = readl(&mac->mii_mgmt_addr);
+	miiCmd = readl(&mac->mii_mgmt_cmd);
 
 	/* Stop the current operation */
-	writel(0, &mac->mii_mgmt_cmd.value);
+	writel(0, &mac->mii_mgmt_cmd);
 
 	/* Set up the register we need to write to on the correct PHY */
-	{
-		MII_MGMT_ADDR_t mii_mgmt_addr;
-
-		mii_mgmt_addr.bits.phy_addr = xcvrAddr;
-		mii_mgmt_addr.bits.reg_addr = xcvrReg;
-		writel(mii_mgmt_addr.value, &mac->mii_mgmt_addr.value);
-	}
+	writel(MII_ADDR(xcvrAddr, xcvrReg), &mac->mii_mgmt_addr);
 
 	/* Add the value to write to the registers to the mac */
-	writel(value, &mac->mii_mgmt_ctrl.value);
+	writel(value, &mac->mii_mgmt_ctrl);
 	delay = 0;
 
 	do {
 		udelay(50);
 		delay++;
-		miiIndicator.value = readl(&mac->mii_mgmt_indicator.value);
-	} while (miiIndicator.bits.busy && delay < 100);
+		miiIndicator = readl(&mac->mii_mgmt_indicator);
+	} while ((miiIndicator & MGMT_BUSY) && delay < 100);
 
 	/* If we hit the max delay, we could not write the register */
 	if (delay == 100) {
@@ -235,23 +215,22 @@ int MiWrite(struct et131x_adapter *adapter, uint8_t xcvrReg, uint16_t value)
 		dev_warn(&adapter->pdev->dev,
 		    "xcvrReg 0x%08x could not be written", xcvrReg);
 		dev_warn(&adapter->pdev->dev, "status is  0x%08x\n",
-			    miiIndicator.value);
+			    miiIndicator);
 		dev_warn(&adapter->pdev->dev, "command is  0x%08x\n",
-			    readl(&mac->mii_mgmt_cmd.value));
+			    readl(&mac->mii_mgmt_cmd));
 
 		MiRead(adapter, xcvrReg, &TempValue);
 
 		status = -EIO;
 	}
-
 	/* Stop the write operation */
-	writel(0, &mac->mii_mgmt_cmd.value);
+	writel(0, &mac->mii_mgmt_cmd);
 
 	/* set the registers we touched back to the state at which we entered
 	 * this function
 	 */
-	writel(miiAddr.value, &mac->mii_mgmt_addr.value);
-	writel(miiCmd.value, &mac->mii_mgmt_cmd.value);
+	writel(miiAddr, &mac->mii_mgmt_addr);
+	writel(miiCmd, &mac->mii_mgmt_cmd);
 
 	return status;
 }