ソースを参照

regulator: regulator driver interface

This allows regulator drivers to register their regulators and provide
operations to the core. It also has a notifier call chain for propagating
regulator events to clients.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Liam Girdwood 17 年 前
コミット
571a354b15
1 ファイル変更99 行追加0 行削除
  1. 99 0
      include/linux/regulator/driver.h

+ 99 - 0
include/linux/regulator/driver.h

@@ -0,0 +1,99 @@
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator_constraints;
+struct regulator_dev;
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * This struct describes regulator operations.
+ */
+struct regulator_ops {
+
+	/* get/set regulator voltage */
+	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV);
+	int (*get_voltage) (struct regulator_dev *);
+
+	/* get/set regulator current  */
+	int (*set_current_limit) (struct regulator_dev *,
+				 int min_uA, int max_uA);
+	int (*get_current_limit) (struct regulator_dev *);
+
+	/* enable/disable regulator */
+	int (*enable) (struct regulator_dev *);
+	int (*disable) (struct regulator_dev *);
+	int (*is_enabled) (struct regulator_dev *);
+
+	/* get/set regulator operating mode (defined in regulator.h) */
+	int (*set_mode) (struct regulator_dev *, unsigned int mode);
+	unsigned int (*get_mode) (struct regulator_dev *);
+
+	/* get most efficient regulator operating mode for load */
+	unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+					  int output_uV, int load_uA);
+
+	/* the operations below are for configuration of regulator state when
+	 * it's parent PMIC enters a global STANBY/HIBERNATE state */
+
+	/* set regulator suspend voltage */
+	int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+	/* enable/disable regulator in suspend state */
+	int (*set_suspend_enable) (struct regulator_dev *);
+	int (*set_suspend_disable) (struct regulator_dev *);
+
+	/* set regulator suspend operating mode (defined in regulator.h) */
+	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+	REGULATOR_VOLTAGE,
+	REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Regulator descriptor
+ *
+ */
+struct regulator_desc {
+	const char *name;
+	int id;
+	struct regulator_ops *ops;
+	int irq;
+	enum regulator_type type;
+	struct module *owner;
+};
+
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					  void *reg_data);
+void regulator_unregister(struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+#endif