[PATCH] USB: ehci power fixes

Miscellaneous updates for EHCI.

 - Mostly updates the power switching on EHCI controllers.  One routine
   centralizes the "power on/off all ports" logic, and the capability to
   do that is reported more correctly.

 - Courtesy Colin Leroy, a patch to always power up ports after resumes
   which didn't keep a USB device suspended.  The reset-everything logic
   powers down those ports (on some hardware) so something needs to turn
   them back on.

 - Minor tweaks/bugfixes for the debug port support.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/ehci-hcd.c

@@ -346,6 +346,22 @@ ehci_reboot (struct notifier_block *self, unsigned long code, void *null)
 	return 0;
 }
 
+static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
+{
+	unsigned port;
+
+	if (!HCS_PPC (ehci->hcs_params))
+		return;
+
+	ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down");
+	for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
+		(void) ehci_hub_control(ehci_to_hcd(ehci),
+				is_on ? SetPortFeature : ClearPortFeature,
+				USB_PORT_FEAT_POWER,
+				port--, NULL, 0);
+	msleep(20);
+}
+
 
 /* called by khubd or root hub init threads */
 
@@ -362,8 +378,10 @@ static int ehci_hc_reset (struct usb_hcd *hcd)
 	dbg_hcs_params (ehci, "reset");
 	dbg_hcc_params (ehci, "reset");
 
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = readl (&ehci->caps->hcs_params);
+
 #ifdef	CONFIG_PCI
-	/* EHCI 0.96 and later may have "extended capabilities" */
 	if (hcd->self.controller->bus == &pci_bus_type) {
 		struct pci_dev	*pdev = to_pci_dev(hcd->self.controller);
 
@@ -383,9 +401,30 @@ static int ehci_hc_reset (struct usb_hcd *hcd)
 			break;
 		}
 
+		/* optional debug port, normally in the first BAR */
+		temp = pci_find_capability (pdev, 0x0a);
+		if (temp) {
+			pci_read_config_dword(pdev, temp, &temp);
+			temp >>= 16;
+			if ((temp & (3 << 13)) == (1 << 13)) {
+				temp &= 0x1fff;
+				ehci->debug = hcd->regs + temp;
+				temp = readl (&ehci->debug->control);
+				ehci_info (ehci, "debug port %d%s\n",
+					HCS_DEBUG_PORT(ehci->hcs_params),
+					(temp & DBGP_ENABLED)
+						? " IN USE"
+						: "");
+				if (!(temp & DBGP_ENABLED))
+					ehci->debug = NULL;
+			}
+		}
+
 		temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
 	} else
 		temp = 0;
+
+	/* EHCI 0.96 and later may have "extended capabilities" */
 	while (temp && count--) {
 		u32		cap;
 
@@ -414,8 +453,7 @@ static int ehci_hc_reset (struct usb_hcd *hcd)
 		ehci_reset (ehci);
 #endif
 
-	/* cache this readonly data; minimize PCI reads */
-	ehci->hcs_params = readl (&ehci->caps->hcs_params);
+	ehci_port_power (ehci, 0);
 
 	/* at least the Genesys GL880S needs fixup here */
 	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
@@ -657,16 +695,11 @@ done2:
 static void ehci_stop (struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
-	u8			rh_ports, port;
 
 	ehci_dbg (ehci, "stop\n");
 
 	/* Turn off port power on all root hub ports. */
-	rh_ports = HCS_N_PORTS (ehci->hcs_params);
-	for (port = 1; port <= rh_ports; port++)
-		(void) ehci_hub_control(hcd,
-			ClearPortFeature, USB_PORT_FEAT_POWER,
-			port, NULL, 0);
+	ehci_port_power (ehci, 0);
 
 	/* no more interrupts ... */
 	del_timer_sync (&ehci->watchdog);
@@ -748,7 +781,6 @@ static int ehci_resume (struct usb_hcd *hcd)
 	unsigned		port;
 	struct usb_device	*root = hcd->self.root_hub;
 	int			retval = -EINVAL;
-	int			powerup = 0;
 
 	// maybe restore (PCI) FLADJ
 
@@ -766,8 +798,6 @@ static int ehci_resume (struct usb_hcd *hcd)
 			up (&hcd->self.root_hub->serialize);
 			break;
 		}
-		if ((status & PORT_POWER) == 0)
-			powerup = 1;
 		if (!root->children [port])
 			continue;
 		dbg_port (ehci, __FUNCTION__, port + 1, status);
@@ -794,16 +824,9 @@ static int ehci_resume (struct usb_hcd *hcd)
 		retval = ehci_start (hcd);
 
 		/* here we "know" root ports should always stay powered;
-		 * but some controllers may lost all power.
+		 * but some controllers may lose all power.
 		 */
-		if (powerup) {
-			ehci_dbg (ehci, "...powerup ports...\n");
-			for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
-				(void) ehci_hub_control(hcd,
-					SetPortFeature, USB_PORT_FEAT_POWER,
-						port--, NULL, 0);
-			msleep(20);
-		}
+		ehci_port_power (ehci, 1);
 	}
 
 	return retval;

drivers/usb/host/ehci-hub.c

@@ -281,6 +281,8 @@ ehci_hub_descriptor (
 	temp = 0x0008;			/* per-port overcurrent reporting */
 	if (HCS_PPC (ehci->hcs_params))
 		temp |= 0x0001;		/* per-port power control */
+	else
+		temp |= 0x0002;		/* no power switching */
 #if 0
 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
 	if (HCS_INDICATOR (ehci->hcs_params))

drivers/usb/host/ehci.h

@@ -47,6 +47,12 @@ struct ehci_stats {
 #define	EHCI_MAX_ROOT_PORTS	15		/* see HCS_N_PORTS */
 
 struct ehci_hcd {			/* one per controller */
+	/* glue to PCI and HCD framework */
+	struct ehci_caps __iomem *caps;
+	struct ehci_regs __iomem *regs;
+	struct ehci_dbg_port __iomem *debug;
+
+	__u32			hcs_params;	/* cached register copy */
 	spinlock_t		lock;
 
 	/* async schedule support */
@@ -84,11 +90,6 @@ struct ehci_hcd {			/* one per controller */
 
 	unsigned		is_tdi_rh_tt:1;	/* TDI roothub with TT */
 
-	/* glue to PCI and HCD framework */
-	struct ehci_caps __iomem *caps;
-	struct ehci_regs __iomem *regs;
-	__u32			hcs_params;	/* cached register copy */
-
 	/* irq statistics */
 #ifdef EHCI_STATS
 	struct ehci_stats	stats;
@@ -165,7 +166,7 @@ struct ehci_caps {
 	/* these fields are specified as 8 and 16 bit registers,
 	 * but some hosts can't perform 8 or 16 bit PCI accesses.
 	 */
-	u32	hc_capbase;
+	u32		hc_capbase;
 #define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
 #define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
 	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
@@ -273,7 +274,7 @@ struct ehci_dbg_port {
 #define DBGP_ENABLED	(1<<28)
 #define DBGP_DONE	(1<<16)
 #define DBGP_INUSE	(1<<10)
-#define DBGP_ERRCODE(x)	(((x)>>7)&0x0f)
+#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
 #	define DBGP_ERR_BAD	1
 #	define DBGP_ERR_SIGNAL	2
 #define DBGP_ERROR	(1<<6)
@@ -282,11 +283,11 @@ struct ehci_dbg_port {
 #define DBGP_LEN(x)	(((x)>>0)&0x0f)
 	u32	pids;
 #define DBGP_PID_GET(x)		(((x)>>16)&0xff)
-#define DBGP_PID_SET(data,tok)	(((data)<<8)|(tok));
+#define DBGP_PID_SET(data,tok)	(((data)<<8)|(tok))
 	u32	data03;
 	u32	data47;
 	u32	address;
-#define DBGP_EPADDR(dev,ep)	(((dev)<<8)|(ep));
+#define DBGP_EPADDR(dev,ep)	(((dev)<<8)|(ep))
 } __attribute__ ((packed));
 
 /*-------------------------------------------------------------------------*/