[PATCH] powerpc: Make Virtex-II Pro support generic for all Virtex devices

The PPC405 hard core is used in both the Virtex-II Pro and Virtex 4 FX
FPGAs.  This patch cleans up the Virtex naming convention to reflect more
than just the Virtex-II Pro.

Rename files virtex-ii_pro.[ch] to virtex.[ch]
Rename config value VIRTEX_II_PRO to XILINX_VIRTEX

Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/ppc/platforms/4xx/Kconfig

@@ -208,11 +208,16 @@ config 405GPR
 	depends on SYCAMORE
 	default y
 
-config VIRTEX_II_PRO
+config XILINX_VIRTEX_II_PRO
 	bool
 	depends on XILINX_ML300
 	default y
 
+config XILINX_VIRTEX
+	bool
+	depends on XILINX_VIRTEX_II_PRO
+	default y
+
 config STB03xxx
 	bool
 	depends on REDWOOD_5 || REDWOOD_6

arch/ppc/platforms/4xx/Makefile

@@ -26,4 +26,4 @@ obj-$(CONFIG_440SP)		+= ibm440sp.o
 obj-$(CONFIG_440SPE)		+= ppc440spe.o
 obj-$(CONFIG_405EP)		+= ibm405ep.o
 obj-$(CONFIG_405GPR)		+= ibm405gpr.o
-obj-$(CONFIG_VIRTEX_II_PRO)	+= virtex-ii_pro.o
+obj-$(CONFIG_XILINX_VIRTEX)	+= virtex.o

arch/ppc/platforms/4xx/virtex-ii_pro.c → arch/ppc/platforms/4xx/virtex.c

@@ -1,5 +1,5 @@
 /*
- * arch/ppc/platforms/4xx/virtex-ii_pro.c
+ * arch/ppc/platforms/4xx/virtex.c
  *
  * Author: MontaVista Software, Inc.
  *         source@mvista.com
@@ -12,7 +12,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <asm/ocp.h>
-#include "virtex-ii_pro.h"
+#include <platforms/4xx/virtex.h>
 
 /* Have OCP take care of the serial ports. */
 struct ocp_def core_ocp[] = {

arch/ppc/platforms/4xx/virtex-ii_pro.h → arch/ppc/platforms/4xx/virtex.h

@@ -1,5 +1,5 @@
 /*
- * arch/ppc/platforms/4xx/virtex-ii_pro.h
+ * arch/ppc/platforms/4xx/virtex.h
  *
  * Include file that defines the Xilinx Virtex-II Pro processor
  *
@@ -12,8 +12,8 @@
  */
 
 #ifdef __KERNEL__
-#ifndef __ASM_VIRTEXIIPRO_H__
-#define __ASM_VIRTEXIIPRO_H__
+#ifndef __ASM_VIRTEX_H__
+#define __ASM_VIRTEX_H__
 
 #include <linux/config.h>
 #include <platforms/4xx/xparameters/xparameters.h>
@@ -95,5 +95,5 @@
 
 #include <asm/ibm405.h>
 
-#endif				/* __ASM_VIRTEXIIPRO_H__ */
+#endif				/* __ASM_VIRTEX_H__ */
 #endif				/* __KERNEL__ */

arch/ppc/platforms/4xx/xilinx_ml300.c

@@ -22,7 +22,7 @@
 #include <asm/machdep.h>
 #include <asm/ocp.h>
 
-#include <platforms/4xx/virtex-ii_pro.h>	/* for NR_SER_PORTS */
+#include <platforms/4xx/virtex.h>	/* for NR_SER_PORTS */
 
 /*
  * As an overview of how the following functions (platform_init,

arch/ppc/platforms/4xx/xilinx_ml300.h

@@ -16,7 +16,7 @@
 #define __ASM_XILINX_ML300_H__
 
 /* ML300 has a Xilinx Virtex-II Pro processor */
-#include <platforms/4xx/virtex-ii_pro.h>
+#include <platforms/4xx/virtex.h>
 
 #ifndef __ASSEMBLY__
 

arch/ppc/syslib/Makefile

@@ -17,7 +17,7 @@ obj-$(CONFIG_440GX)		+= ibm440gx_common.o
 obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
 obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
 ifeq ($(CONFIG_4xx),y)
-ifeq ($(CONFIG_VIRTEX_II_PRO),y)
+ifeq ($(CONFIG_XILINX_VIRTEX),y)
 obj-$(CONFIG_40x)		+= xilinx_pic.o
 else
 ifeq ($(CONFIG_403),y)