Staging: dt3155: Cleanup memory mapped i/o access

The macros ReadMReg and WriteMReg are really just private versions of
the kernel's readl and writel functions.  Use the kernel's functions
instead.  And since ioremap returns a (void __iomem *) not a (u8 *),
change all the uses of dt3155_lbase to reflect this.

While here, make dt3155_lbase static since it is only used in the
dt3155_drv.c file.  Also, remove the global variable dt3155_bbase
since it is not used anywhere in the code.

Where is makes sense, create a local 'mmio' variable instead of using
dt3155_lbase[minor] to make the code more readable.

This change also affects the {Read|Write}I2C functions so they are
also modified as needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/dt3155/dt3155_drv.c

@@ -64,8 +64,8 @@ extern void printques(int);
 #include <linux/poll.h>
 #include <linux/sched.h>
 #include <linux/smp_lock.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/uaccess.h>
 
 #include "dt3155.h"
@@ -112,14 +112,12 @@ int dt3155_major = 0;
 struct dt3155_status dt3155_status[MAXBOARDS];
 
 /* kernel logical address of the board */
-u8 *dt3155_lbase[MAXBOARDS] = { NULL
+static void __iomem *dt3155_lbase[MAXBOARDS] = { NULL
 #if MAXBOARDS == 2
 				      , NULL
 #endif
 };
-/* DT3155 registers              */
-u8 *dt3155_bbase = NULL;		  /* kernel logical address of the *
-					   * buffer region                 */
+
 u32  dt3155_dev_open[MAXBOARDS] = {0
 #if MAXBOARDS == 2
 				       , 0
@@ -139,11 +137,11 @@ static void quick_stop (int minor)
 {
   // TODO: scott was here
 #if 1
-  ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+  int_csr_r.reg = readl(dt3155_lbase[minor] + INT_CSR);
   /* disable interrupts */
   int_csr_r.fld.FLD_END_EVE_EN = 0;
   int_csr_r.fld.FLD_END_ODD_EN = 0;
-  WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+  writel(int_csr_r.reg, dt3155_lbase[minor] + INT_CSR);
 
   dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
   /* mark the system stopped: */
@@ -171,6 +169,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
   int    index;
   unsigned long flags;
   u32 buffer_addr;
+  void __iomem *mmio;
 
   /* find out who issued the interrupt */
   for (index = 0; index < ndevices; index++) {
@@ -187,8 +186,10 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
     return;
   }
 
+  mmio = dt3155_lbase[minor];
+
   /* Check for corruption and set a flag if so */
-  ReadMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
+  csr1_r.reg = readl(mmio + CSR1);
 
   if ((csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD))
     {
@@ -200,7 +201,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
       return;
     }
 
-  ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+  int_csr_r.reg = readl(mmio + INT_CSR);
 
   /* Handle the even field ... */
   if (int_csr_r.fld.FLD_END_EVE)
@@ -211,7 +212,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
 	  dt3155_fbuffer[minor]->frame_count++;
 	}
 
-      ReadI2C(dt3155_lbase[minor], EVEN_CSR, &i2c_even_csr.reg);
+      ReadI2C(mmio, EVEN_CSR, &i2c_even_csr.reg);
 
       /* Clear the interrupt? */
       int_csr_r.fld.FLD_END_EVE = 1;
@@ -231,7 +232,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
 	    }
 	}
 
-      WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+      writel(int_csr_r.reg, mmio + INT_CSR);
 
       /* Set up next DMA if we are doing FIELDS */
       if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
@@ -249,7 +250,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
 
 	  /* Set up the DMA address for the next field */
 	  local_irq_restore(flags);
-	  WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr);
+	  writel(buffer_addr, mmio + ODD_DMA_START);
 	}
 
       /* Check for errors. */
@@ -257,7 +258,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
       if (i2c_even_csr.fld.ERROR_EVE)
 	dt3155_errno = DT_ERR_OVERRUN;
 
-      WriteI2C(dt3155_lbase[minor], EVEN_CSR, i2c_even_csr.reg);
+      WriteI2C(mmio, EVEN_CSR, i2c_even_csr.reg);
 
       /* Note that we actually saw an even field meaning  */
       /* that subsequent odd field complete the frame     */
@@ -274,7 +275,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
   /* ... now handle the odd field */
   if (int_csr_r.fld.FLD_END_ODD)
     {
-      ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
+      ReadI2C(mmio, ODD_CSR, &i2c_odd_csr.reg);
 
       /* Clear the interrupt? */
       int_csr_r.fld.FLD_END_ODD = 1;
@@ -310,7 +311,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
 	    }
 	}
 
-      WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+      writel(int_csr_r.reg, mmio + INT_CSR);
 
       /* if the odd field has been acquired, then     */
       /* change the next dma location for both fields */
@@ -387,14 +388,14 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
       if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
 	   DT3155_STATE_FLD)
 	{
-	  WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
+	  writel(buffer_addr, mmio + EVEN_DMA_START);
 	}
       else
 	{
-	  WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
+	  writel(buffer_addr, mmio + EVEN_DMA_START);
 
-	  WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr
-		    + dt3155_status[minor].config.cols);
+	  writel(buffer_addr + dt3155_status[minor].config.cols,
+		mmio + ODD_DMA_START);
 	}
 
       /* Do error checking */
@@ -402,7 +403,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
       if (i2c_odd_csr.fld.ERROR_ODD)
 	dt3155_errno = DT_ERR_OVERRUN;
 
-      WriteI2C(dt3155_lbase[minor], ODD_CSR, i2c_odd_csr.reg);
+      WriteI2C(mmio, ODD_CSR, i2c_odd_csr.reg);
 
       return;
     }
@@ -419,6 +420,7 @@ static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
 static void dt3155_init_isr(int minor)
 {
   const u32 stride =  dt3155_status[minor].config.cols;
+  void __iomem *mmio = dt3155_lbase[minor];
 
   switch (dt3155_status[minor].state & DT3155_STATE_MODE)
     {
@@ -429,12 +431,9 @@ static void dt3155_init_isr(int minor)
 	even_dma_stride_r = 0;
 	odd_dma_stride_r  = 0;
 
-	WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START),
-		  even_dma_start_r);
-	WriteMReg((dt3155_lbase[minor] + EVEN_DMA_STRIDE),
-		  even_dma_stride_r);
-	WriteMReg((dt3155_lbase[minor] + ODD_DMA_STRIDE),
-		  odd_dma_stride_r);
+	writel(even_dma_start_r, mmio + EVEN_DMA_START);
+	writel(even_dma_stride_r, mmio + EVEN_DMA_STRIDE);
+	writel(odd_dma_stride_r, mmio + ODD_DMA_STRIDE);
 	break;
       }
 
@@ -447,14 +446,10 @@ static void dt3155_init_isr(int minor)
 	even_dma_stride_r =  stride;
 	odd_dma_stride_r  =  stride;
 
-	WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START),
-		  even_dma_start_r);
-	WriteMReg((dt3155_lbase[minor] + ODD_DMA_START),
-		  odd_dma_start_r);
-	WriteMReg((dt3155_lbase[minor] + EVEN_DMA_STRIDE),
-		  even_dma_stride_r);
-	WriteMReg((dt3155_lbase[minor] + ODD_DMA_STRIDE),
-		  odd_dma_stride_r);
+	writel(even_dma_start_r, mmio + EVEN_DMA_START);
+	writel(odd_dma_start_r, mmio + ODD_DMA_START);
+	writel(even_dma_stride_r, mmio + EVEN_DMA_STRIDE);
+	writel(odd_dma_stride_r, mmio + ODD_DMA_STRIDE);
 	break;
       }
     }
@@ -462,9 +457,9 @@ static void dt3155_init_isr(int minor)
   /* 50/60 Hz should be set before this point but let's make sure it is */
   /* right anyway */
 
-  ReadI2C(dt3155_lbase[minor], CSR2, &i2c_csr2.reg);
+  ReadI2C(mmio, CSR2, &i2c_csr2.reg);
   i2c_csr2.fld.HZ50 = FORMAT50HZ;
-  WriteI2C(dt3155_lbase[minor], CSR2, i2c_csr2.reg);
+  WriteI2C(mmio, CSR2, i2c_csr2.reg);
 
   /* enable busmaster chip, clear flags */
 
@@ -484,7 +479,7 @@ static void dt3155_init_isr(int minor)
   csr1_r.fld.FLD_CRPT_EVE   = 1; /* writing a 1 clears flags */
   csr1_r.fld.FLD_CRPT_ODD   = 1;
 
-  WriteMReg((dt3155_lbase[minor] + CSR1),csr1_r.reg);
+  writel(csr1_r.reg, mmio + CSR1);
 
   /* Enable interrupts at the end of each field */
 
@@ -493,14 +488,14 @@ static void dt3155_init_isr(int minor)
   int_csr_r.fld.FLD_END_ODD_EN = 1;
   int_csr_r.fld.FLD_START_EN = 0;
 
-  WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+  writel(int_csr_r.reg, mmio + INT_CSR);
 
   /* start internal BUSY bits */
 
-  ReadI2C(dt3155_lbase[minor], CSR2, &i2c_csr2.reg);
+  ReadI2C(mmio, CSR2, &i2c_csr2.reg);
   i2c_csr2.fld.BUSY_ODD  = 1;
   i2c_csr2.fld.BUSY_EVE  = 1;
-  WriteI2C(dt3155_lbase[minor], CSR2, i2c_csr2.reg);
+  WriteI2C(mmio, CSR2, i2c_csr2.reg);
 
   /* Now its up to the interrupt routine!! */
 
@@ -709,7 +704,7 @@ static int dt3155_open(struct inode* inode, struct file* filep)
 
   /* Disable ALL interrupts */
   int_csr_r.reg = 0;
-  WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
+  writel(int_csr_r.reg, dt3155_lbase[minor] + INT_CSR);
 
   init_waitqueue_head(&(dt3155_read_wait_queue[minor]));
 
@@ -911,7 +906,7 @@ static int find_PCI (void)
 
       /* Remap the base address to a logical address through which we
        * can access it. */
-      dt3155_lbase[pci_index - 1] = ioremap(base,PCI_PAGE_SIZE);
+      dt3155_lbase[pci_index - 1] = ioremap(base, PCI_PAGE_SIZE);
       dt3155_status[pci_index - 1].reg_addr = base;
       DT_3155_DEBUG_MSG("DT3155: New logical address is %p \n",
 			dt3155_lbase[pci_index-1]);
@@ -1036,7 +1031,7 @@ int init_module(void)
   int_csr_r.reg = 0;
   for( index = 0;  index < ndevices;  index++)
     {
-      WriteMReg((dt3155_lbase[index] + INT_CSR), int_csr_r.reg);
+      writel(int_csr_r.reg, dt3155_lbase[index] + INT_CSR);
       if(dt3155_status[index].device_installed)
 	{
 	  /*

drivers/staging/dt3155/dt3155_drv.h

@@ -24,12 +24,6 @@ MA 02111-1307 USA
 #ifndef DT3155_DRV_INC
 #define DT3155_DRV_INC
 
-/* kernel logical address of the frame grabbers */
-extern u8 *dt3155_lbase[MAXBOARDS];
-
-/* kernel logical address of ram buffer */
-extern u8 *dt3155_bbase;
-
 #ifdef __KERNEL__
 #include <linux/wait.h>
 

drivers/staging/dt3155/dt3155_io.c

@@ -21,6 +21,8 @@
  */
 
 #include <linux/delay.h>
+#include <linux/io.h>
+
 #include "dt3155.h"
 #include "dt3155_io.h"
 #include "dt3155_drv.h"
@@ -75,13 +77,13 @@ u8 i2c_pm_lut_data;
  *
  * This function handles read/write timing and r/w timeout error
  */
-static int wait_ibsyclr(u8 *lpReg)
+static int wait_ibsyclr(void __iomem *mmio)
 {
 	/* wait 100 microseconds */
 	udelay(100L);
 	/* __delay(loops_per_sec/10000); */
 
-	ReadMReg(lpReg + IIC_CSR2, iic_csr2_r.reg);
+	iic_csr2_r.reg = readl(mmio + IIC_CSR2);
 	if (iic_csr2_r.fld.NEW_CYCLE) {
 		/* if NEW_CYCLE didn't clear */
 		/* TIMEOUT ERROR */
@@ -101,11 +103,11 @@ static int wait_ibsyclr(u8 *lpReg)
  * 2nd parameter is reg. index;
  * 3rd is value to be written
  */
-int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
+int WriteI2C(void __iomem *mmio, u_short wIregIndex, u8 byVal)
 {
 	/* read 32 bit IIC_CSR2 register data into union */
 
-	ReadMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
+	iic_csr2_r.reg = readl(mmio + IIC_CSR2);
 
 	/* for write operation */
 	iic_csr2_r.fld.DIR_RD      = 0;
@@ -117,10 +119,10 @@ int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
 	iic_csr2_r.fld.NEW_CYCLE   = 1;
 
 	/* xfer union data into 32 bit IIC_CSR2 register */
-	WriteMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
+	writel(iic_csr2_r.reg, mmio + IIC_CSR2);
 
 	/* wait for IIC cycle to finish */
-	return wait_ibsyclr(lpReg);
+	return wait_ibsyclr(mmio);
 }
 
 /*
@@ -132,12 +134,12 @@ int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
  * 2nd parameter is reg. index;
  * 3rd is adrs of value to be read
  */
-int ReadI2C(u8 *lpReg, u_short wIregIndex, u8 *byVal)
+int ReadI2C(void __iomem *mmio, u_short wIregIndex, u8 *byVal)
 {
 	int writestat;	/* status for return */
 
 	/*  read 32 bit IIC_CSR2 register data into union */
-	ReadMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
+	iic_csr2_r.reg = readl(mmio + IIC_CSR2);
 
 	/*  for read operation */
 	iic_csr2_r.fld.DIR_RD     = 1;
@@ -149,14 +151,14 @@ int ReadI2C(u8 *lpReg, u_short wIregIndex, u8 *byVal)
 	iic_csr2_r.fld.NEW_CYCLE  = 1;
 
 	/*  xfer union's data into 32 bit IIC_CSR2 register */
-	WriteMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
+	writel(iic_csr2_r.reg, mmio + IIC_CSR2);
 
 	/* wait for IIC cycle to finish */
-	writestat = wait_ibsyclr(lpReg);
+	writestat = wait_ibsyclr(mmio);
 
 	/* Next 2 commands read 32 bit IIC_CSR1 register's data into union */
 	/* first read data is in IIC_CSR1 */
-	ReadMReg((lpReg + IIC_CSR1), iic_csr1_r.reg);
+	iic_csr1_r.reg = readl(mmio + IIC_CSR1);
 
 	/* now get data u8 out of register */
 	*byVal = (u8) iic_csr1_r.fld.RD_DATA;

drivers/staging/dt3155/dt3155_io.h

@@ -34,11 +34,6 @@ MA 02111-1307 USA
 #ifndef DT3155_IO_INC
 #define DT3155_IO_INC
 
-/* macros to access registers */
-
-#define WriteMReg(Address, Data)	(*((u32 *)(Address)) = Data)
-#define ReadMReg(Address, Data)		(Data = *((u32 *)(Address)))
-
 /***************** 32 bit register globals  **************/
 
 /*  offsets for 32-bit memory mapped registers */
@@ -352,7 +347,7 @@ extern u8			i2c_pm_lut_data;
 
 /* access 8-bit IIC registers */
 
-extern int ReadI2C(u8 *lpReg, u_short wIregIndex, u8 *byVal);
-extern int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal);
+extern int ReadI2C(void __iomem *mmio, u_short wIregIndex, u8 *byVal);
+extern int WriteI2C(void __iomem *mmio, u_short wIregIndex, u8 byVal);
 
 #endif