vt8623fb: new framebuffer driver for VIA VT8623

This patch adds fbdev driver for graphics core in VIA VT8623

[adaplas@gmail.com: build fixes]
Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/fb/vt8623fb.txt

@@ -0,0 +1,64 @@
+
+	vt8623fb - fbdev driver for graphics core in VIA VT8623 chipset
+	===============================================================
+
+
+Supported Hardware
+==================
+
+	VIA VT8623 [CLE266] chipset and	its graphics core
+		(known as CastleRock or Unichrome)
+
+I tested vt8623fb on VIA EPIA ML-6000
+
+
+Supported Features
+==================
+
+	*  4 bpp pseudocolor modes (with 18bit palette, two variants)
+	*  8 bpp pseudocolor mode (with 18bit palette)
+	* 16 bpp truecolor mode (RGB 565)
+	* 32 bpp truecolor mode (RGB 888)
+	* text mode (activated by bpp = 0)
+	* doublescan mode variant (not available in text mode)
+	* panning in both directions
+	* suspend/resume support
+	* DPMS support
+
+Text mode is supported even in higher resolutions, but there is limitation to
+lower pixclocks (maximum about 100 MHz). This limitation is not enforced by
+driver. Text mode supports 8bit wide fonts only (hardware limitation) and
+16bit tall fonts (driver limitation).
+
+There are two 4 bpp modes. First mode (selected if nonstd == 0) is mode with
+packed pixels, high nibble first. Second mode (selected if nonstd == 1) is mode
+with interleaved planes (1 byte interleave), MSB first. Both modes support
+8bit wide fonts only (driver limitation).
+
+Suspend/resume works on systems that initialize video card during resume and
+if device is active (for example used by fbcon).
+
+
+Missing Features
+================
+(alias TODO list)
+
+	* secondary (not initialized by BIOS) device support
+	* MMIO support
+	* interlaced mode variant
+	* support for fontwidths != 8 in 4 bpp modes
+	* support for fontheight != 16 in text mode
+	* hardware cursor
+	* video overlay support
+	* vsync synchronization
+	* acceleration support (8514-like 2D, busmaster transfers)
+
+
+Known bugs
+==========
+
+	* cursor disable in text mode doesn't work
+
+
+--
+Ondrej Zajicek <santiago@crfreenet.org>

drivers/video/Kconfig

@@ -1348,6 +1348,20 @@ config FB_VOODOO1
 	  Please read the <file:Documentation/fb/README-sstfb.txt> for supported
 	  options and other important info  support.
 
+config FB_VT8623
+	tristate "VIA VT8623 support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for CastleRock integrated graphics core in the
+	  VIA VT8623 [Apollo CLE266] chipset.
+
 config FB_CYBLA
 	tristate "Cyberblade/i1 support"
 	depends on FB && PCI && X86_32 && !64BIT

drivers/video/Makefile

@@ -54,6 +54,7 @@ obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
 obj-$(CONFIG_FB_CT65550)          += chipsfb.o
 obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
 obj-$(CONFIG_FB_FM2)              += fm2fb.o
+obj-$(CONFIG_FB_VT8623)           += vt8623fb.o
 obj-$(CONFIG_FB_CYBLA)            += cyblafb.o
 obj-$(CONFIG_FB_TRIDENT)          += tridentfb.o
 obj-$(CONFIG_FB_LE80578)          += vermilion/

drivers/video/vt8623fb.c

@@ -0,0 +1,926 @@
+/*
+ * linux/drivers/video/vt8623fb.c - fbdev driver for
+ * integrated graphic core in VIA VT8623 [CLE266] chipset
+ *
+ * Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Code is based on s3fb, some parts are from David Boucher's viafb
+ * (http://davesdomain.org.uk/viafb/)
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/svga.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/console.h> /* Why should fb driver call console functions? because acquire_console_sem() */
+#include <video/vga.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+struct vt8623fb_info {
+	char __iomem *mmio_base;
+	int mtrr_reg;
+	struct vgastate state;
+	struct mutex open_lock;
+	unsigned int ref_count;
+	u32 pseudo_palette[16];
+};
+
+
+
+/* ------------------------------------------------------------------------- */
+
+static const struct svga_fb_format vt8623fb_formats[] = {
+	{ 0,  {0, 6, 0},  {0, 6, 0},  {0, 6, 0}, {0, 0, 0}, 0,
+		FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP8,	FB_VISUAL_PSEUDOCOLOR, 16, 16},
+	{ 4,  {0, 6, 0},  {0, 6, 0},  {0, 6, 0}, {0, 0, 0}, 0,
+		FB_TYPE_PACKED_PIXELS, 0,		FB_VISUAL_PSEUDOCOLOR, 16, 16},
+	{ 4,  {0, 6, 0},  {0, 6, 0},  {0, 6, 0}, {0, 0, 0}, 1,
+		FB_TYPE_INTERLEAVED_PLANES, 1,		FB_VISUAL_PSEUDOCOLOR, 16, 16},
+	{ 8,  {0, 6, 0},  {0, 6, 0},  {0, 6, 0}, {0, 0, 0}, 0,
+		FB_TYPE_PACKED_PIXELS, 0,		FB_VISUAL_PSEUDOCOLOR, 8, 8},
+/*	{16,  {10, 5, 0}, {5, 5, 0},  {0, 5, 0}, {0, 0, 0}, 0,
+		FB_TYPE_PACKED_PIXELS, 0,		FB_VISUAL_TRUECOLOR, 4, 4},	*/
+	{16,  {11, 5, 0}, {5, 6, 0},  {0, 5, 0}, {0, 0, 0}, 0,
+		FB_TYPE_PACKED_PIXELS, 0,		FB_VISUAL_TRUECOLOR, 4, 4},
+	{32,  {16, 8, 0}, {8, 8, 0},  {0, 8, 0}, {0, 0, 0}, 0,
+		FB_TYPE_PACKED_PIXELS, 0,		FB_VISUAL_TRUECOLOR, 2, 2},
+	SVGA_FORMAT_END
+};
+
+static const struct svga_pll vt8623_pll = {2, 127, 2, 7, 0, 3,
+	60000, 300000, 14318};
+
+/* CRT timing register sets */
+
+struct vga_regset vt8623_h_total_regs[]       = {{0x00, 0, 7}, {0x36, 3, 3}, VGA_REGSET_END};
+struct vga_regset vt8623_h_display_regs[]     = {{0x01, 0, 7}, VGA_REGSET_END};
+struct vga_regset vt8623_h_blank_start_regs[] = {{0x02, 0, 7}, VGA_REGSET_END};
+struct vga_regset vt8623_h_blank_end_regs[]   = {{0x03, 0, 4}, {0x05, 7, 7}, {0x33, 5, 5}, VGA_REGSET_END};
+struct vga_regset vt8623_h_sync_start_regs[]  = {{0x04, 0, 7}, {0x33, 4, 4}, VGA_REGSET_END};
+struct vga_regset vt8623_h_sync_end_regs[]    = {{0x05, 0, 4}, VGA_REGSET_END};
+
+struct vga_regset vt8623_v_total_regs[]       = {{0x06, 0, 7}, {0x07, 0, 0}, {0x07, 5, 5}, {0x35, 0, 0}, VGA_REGSET_END};
+struct vga_regset vt8623_v_display_regs[]     = {{0x12, 0, 7}, {0x07, 1, 1}, {0x07, 6, 6}, {0x35, 2, 2}, VGA_REGSET_END};
+struct vga_regset vt8623_v_blank_start_regs[] = {{0x15, 0, 7}, {0x07, 3, 3}, {0x09, 5, 5}, {0x35, 3, 3}, VGA_REGSET_END};
+struct vga_regset vt8623_v_blank_end_regs[]   = {{0x16, 0, 7}, VGA_REGSET_END};
+struct vga_regset vt8623_v_sync_start_regs[]  = {{0x10, 0, 7}, {0x07, 2, 2}, {0x07, 7, 7}, {0x35, 1, 1}, VGA_REGSET_END};
+struct vga_regset vt8623_v_sync_end_regs[]    = {{0x11, 0, 3}, VGA_REGSET_END};
+
+struct vga_regset vt8623_offset_regs[]        = {{0x13, 0, 7}, {0x35, 5, 7}, VGA_REGSET_END};
+struct vga_regset vt8623_line_compare_regs[]  = {{0x18, 0, 7}, {0x07, 4, 4}, {0x09, 6, 6}, {0x33, 0, 2}, {0x35, 4, 4}, VGA_REGSET_END};
+struct vga_regset vt8623_fetch_count_regs[]   = {{0x1C, 0, 7}, {0x1D, 0, 1}, VGA_REGSET_END};
+struct vga_regset vt8623_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x34, 0, 7}, {0x48, 0, 1}, VGA_REGSET_END};
+
+struct svga_timing_regs vt8623_timing_regs     = {
+	vt8623_h_total_regs, vt8623_h_display_regs, vt8623_h_blank_start_regs,
+	vt8623_h_blank_end_regs, vt8623_h_sync_start_regs, vt8623_h_sync_end_regs,
+	vt8623_v_total_regs, vt8623_v_display_regs, vt8623_v_blank_start_regs,
+	vt8623_v_blank_end_regs, vt8623_v_sync_start_regs, vt8623_v_sync_end_regs,
+};
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/* Module parameters */
+
+static char *mode = "640x480-8@60";
+
+#ifdef CONFIG_MTRR
+static int mtrr = 1;
+#endif
+
+MODULE_AUTHOR("(c) 2006 Ondrej Zajicek <santiago@crfreenet.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("fbdev driver for integrated graphics core in VIA VT8623 [CLE266]");
+
+module_param(mode, charp, 0644);
+MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc)");
+
+#ifdef CONFIG_MTRR
+module_param(mtrr, int, 0444);
+MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
+
+static struct fb_tile_ops vt8623fb_tile_ops = {
+	.fb_settile	= svga_settile,
+	.fb_tilecopy	= svga_tilecopy,
+	.fb_tilefill    = svga_tilefill,
+	.fb_tileblit    = svga_tileblit,
+	.fb_tilecursor  = svga_tilecursor,
+	.fb_get_tilemax = svga_get_tilemax,
+};
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/* image data is MSB-first, fb structure is MSB-first too */
+static inline u32 expand_color(u32 c)
+{
+	return ((c & 1) | ((c & 2) << 7) | ((c & 4) << 14) | ((c & 8) << 21)) * 0xFF;
+}
+
+/* vt8623fb_iplan_imageblit silently assumes that almost everything is 8-pixel aligned */
+static void vt8623fb_iplan_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	u32 fg = expand_color(image->fg_color);
+	u32 bg = expand_color(image->bg_color);
+	const u8 *src1, *src;
+	u8 __iomem *dst1;
+	u32 __iomem *dst;
+	u32 val;
+	int x, y;
+
+	src1 = image->data;
+	dst1 = info->screen_base + (image->dy * info->fix.line_length)
+		 + ((image->dx / 8) * 4);
+
+	for (y = 0; y < image->height; y++) {
+		src = src1;
+		dst = (u32 __iomem *) dst1;
+		for (x = 0; x < image->width; x += 8) {
+			val = *(src++) * 0x01010101;
+			val = (val & fg) | (~val & bg);
+			fb_writel(val, dst++);
+		}
+		src1 += image->width / 8;
+		dst1 += info->fix.line_length;
+	}
+}
+
+/* vt8623fb_iplan_fillrect silently assumes that almost everything is 8-pixel aligned */
+static void vt8623fb_iplan_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	u32 fg = expand_color(rect->color);
+	u8 __iomem *dst1;
+	u32 __iomem *dst;
+	int x, y;
+
+	dst1 = info->screen_base + (rect->dy * info->fix.line_length)
+		 + ((rect->dx / 8) * 4);
+
+	for (y = 0; y < rect->height; y++) {
+		dst = (u32 __iomem *) dst1;
+		for (x = 0; x < rect->width; x += 8) {
+			fb_writel(fg, dst++);
+		}
+		dst1 += info->fix.line_length;
+	}
+}
+
+
+/* image data is MSB-first, fb structure is high-nibble-in-low-byte-first */
+static inline u32 expand_pixel(u32 c)
+{
+	return (((c &  1) << 24) | ((c &  2) << 27) | ((c &  4) << 14) | ((c &   8) << 17) |
+		((c & 16) <<  4) | ((c & 32) <<  7) | ((c & 64) >>  6) | ((c & 128) >>  3)) * 0xF;
+}
+
+/* vt8623fb_cfb4_imageblit silently assumes that almost everything is 8-pixel aligned */
+static void vt8623fb_cfb4_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	u32 fg = image->fg_color * 0x11111111;
+	u32 bg = image->bg_color * 0x11111111;
+	const u8 *src1, *src;
+	u8 __iomem *dst1;
+	u32 __iomem *dst;
+	u32 val;
+	int x, y;
+
+	src1 = image->data;
+	dst1 = info->screen_base + (image->dy * info->fix.line_length)
+		 + ((image->dx / 8) * 4);
+
+	for (y = 0; y < image->height; y++) {
+		src = src1;
+		dst = (u32 __iomem *) dst1;
+		for (x = 0; x < image->width; x += 8) {
+			val = expand_pixel(*(src++));
+			val = (val & fg) | (~val & bg);
+			fb_writel(val, dst++);
+		}
+		src1 += image->width / 8;
+		dst1 += info->fix.line_length;
+	}
+}
+
+static void vt8623fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	if ((info->var.bits_per_pixel == 4) && (image->depth == 1)
+	    && ((image->width % 8) == 0) && ((image->dx % 8) == 0)) {
+		if (info->fix.type == FB_TYPE_INTERLEAVED_PLANES)
+			vt8623fb_iplan_imageblit(info, image);
+		else
+			vt8623fb_cfb4_imageblit(info, image);
+	} else
+		cfb_imageblit(info, image);
+}
+
+static void vt8623fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	if ((info->var.bits_per_pixel == 4)
+	    && ((rect->width % 8) == 0) && ((rect->dx % 8) == 0)
+	    && (info->fix.type == FB_TYPE_INTERLEAVED_PLANES))
+		vt8623fb_iplan_fillrect(info, rect);
+	 else
+		cfb_fillrect(info, rect);
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+
+static void vt8623_set_pixclock(struct fb_info *info, u32 pixclock)
+{
+	u16 m, n, r;
+	u8 regval;
+	int rv;
+
+	rv = svga_compute_pll(&vt8623_pll, 1000000000 / pixclock, &m, &n, &r, info->node);
+	if (rv < 0) {
+		printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node);
+		return;
+	}
+
+	/* Set VGA misc register  */
+	regval = vga_r(NULL, VGA_MIS_R);
+	vga_w(NULL, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD);
+
+	/* Set clock registers */
+	vga_wseq(NULL, 0x46, (n  | (r << 6)));
+	vga_wseq(NULL, 0x47, m);
+
+	udelay(1000);
+
+	/* PLL reset */
+	svga_wseq_mask(0x40, 0x02, 0x02);
+	svga_wseq_mask(0x40, 0x00, 0x02);
+}
+
+
+static int vt8623fb_open(struct fb_info *info, int user)
+{
+	struct vt8623fb_info *par = info->par;
+
+	mutex_lock(&(par->open_lock));
+	if (par->ref_count == 0) {
+		memset(&(par->state), 0, sizeof(struct vgastate));
+		par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | VGA_SAVE_CMAP;
+		par->state.num_crtc = 0xA2;
+		par->state.num_seq = 0x50;
+		save_vga(&(par->state));
+	}
+
+	par->ref_count++;
+	mutex_unlock(&(par->open_lock));
+
+	return 0;
+}
+
+static int vt8623fb_release(struct fb_info *info, int user)
+{
+	struct vt8623fb_info *par = info->par;
+
+	mutex_lock(&(par->open_lock));
+	if (par->ref_count == 0) {
+		mutex_unlock(&(par->open_lock));
+		return -EINVAL;
+	}
+
+	if (par->ref_count == 1)
+		restore_vga(&(par->state));
+
+	par->ref_count--;
+	mutex_unlock(&(par->open_lock));
+
+	return 0;
+}
+
+static int vt8623fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	int rv, mem, step;
+
+	/* Find appropriate format */
+	rv = svga_match_format (vt8623fb_formats, var, NULL);
+	if (rv < 0)
+	{
+		printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node);
+		return rv;
+	}
+
+	/* Do not allow to have real resoulution larger than virtual */
+	if (var->xres > var->xres_virtual)
+		var->xres_virtual = var->xres;
+
+	if (var->yres > var->yres_virtual)
+		var->yres_virtual = var->yres;
+
+	/* Round up xres_virtual to have proper alignment of lines */
+	step = vt8623fb_formats[rv].xresstep - 1;
+	var->xres_virtual = (var->xres_virtual+step) & ~step;
+
+	/* Check whether have enough memory */
+	mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
+	if (mem > info->screen_size)
+	{
+		printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", info->node, mem >> 10, (unsigned int) (info->screen_size >> 10));
+		return -EINVAL;
+	}
+
+	/* Text mode is limited to 256 kB of memory */
+	if ((var->bits_per_pixel == 0) && (mem > (256*1024)))
+	{
+		printk(KERN_ERR "fb%d: text framebuffer size too large (%d kB requested, 256 kB possible)\n", info->node, mem >> 10);
+		return -EINVAL;
+	}
+
+	rv = svga_check_timings (&vt8623_timing_regs, var, info->node);
+	if (rv < 0)
+	{
+		printk(KERN_ERR "fb%d: invalid timings requested\n", info->node);
+		return rv;
+	}
+
+	/* Interlaced mode not supported */
+	if (var->vmode & FB_VMODE_INTERLACED)
+		return -EINVAL;
+
+	return 0;
+}
+
+
+static int vt8623fb_set_par(struct fb_info *info)
+{
+	u32 mode, offset_value, fetch_value, screen_size;
+	u32 bpp = info->var.bits_per_pixel;
+
+	if (bpp != 0) {
+		info->fix.ypanstep = 1;
+		info->fix.line_length = (info->var.xres_virtual * bpp) / 8;
+
+		info->flags &= ~FBINFO_MISC_TILEBLITTING;
+		info->tileops = NULL;
+
+		/* in 4bpp supports 8p wide tiles only, any tiles otherwise */
+		info->pixmap.blit_x = (bpp == 4) ? (1 << (8 - 1)) : (~(u32)0);
+		info->pixmap.blit_y = ~(u32)0;
+
+		offset_value = (info->var.xres_virtual * bpp) / 64;
+		fetch_value  = ((info->var.xres * bpp) / 128) + 4;
+
+		if (bpp == 4)
+			fetch_value  = (info->var.xres / 8) + 8; /* + 0 is OK */
+
+		screen_size  = info->var.yres_virtual * info->fix.line_length;
+	} else {
+		info->fix.ypanstep = 16;
+		info->fix.line_length = 0;
+
+		info->flags |= FBINFO_MISC_TILEBLITTING;
+		info->tileops = &vt8623fb_tile_ops;
+
+		/* supports 8x16 tiles only */
+		info->pixmap.blit_x = 1 << (8 - 1);
+		info->pixmap.blit_y = 1 << (16 - 1);
+
+		offset_value = info->var.xres_virtual / 16;
+		fetch_value  = (info->var.xres / 8) + 8;
+		screen_size  = (info->var.xres_virtual * info->var.yres_virtual) / 64;
+	}
+
+	info->var.xoffset = 0;
+	info->var.yoffset = 0;
+	info->var.activate = FB_ACTIVATE_NOW;
+
+	/* Unlock registers */
+	svga_wseq_mask(0x10, 0x01, 0x01);
+	svga_wcrt_mask(0x11, 0x00, 0x80);
+	svga_wcrt_mask(0x47, 0x00, 0x01);
+
+	/* Device, screen and sync off */
+	svga_wseq_mask(0x01, 0x20, 0x20);
+	svga_wcrt_mask(0x36, 0x30, 0x30);
+	svga_wcrt_mask(0x17, 0x00, 0x80);
+
+	/* Set default values */
+	svga_set_default_gfx_regs();
+	svga_set_default_atc_regs();
+	svga_set_default_seq_regs();
+	svga_set_default_crt_regs();
+	svga_wcrt_multi(vt8623_line_compare_regs, 0xFFFFFFFF);
+	svga_wcrt_multi(vt8623_start_address_regs, 0);
+
+	svga_wcrt_multi(vt8623_offset_regs, offset_value);
+	svga_wseq_multi(vt8623_fetch_count_regs, fetch_value);
+
+	if (info->var.vmode & FB_VMODE_DOUBLE)
+		svga_wcrt_mask(0x09, 0x80, 0x80);
+	else
+		svga_wcrt_mask(0x09, 0x00, 0x80);
+
+	svga_wseq_mask(0x1E, 0xF0, 0xF0); // DI/DVP bus
+	svga_wseq_mask(0x2A, 0x0F, 0x0F); // DI/DVP bus
+	svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read treshold
+	vga_wseq(NULL, 0x17, 0x1F);       // FIFO depth
+	vga_wseq(NULL, 0x18, 0x4E);
+	svga_wseq_mask(0x1A, 0x08, 0x08); // enable MMIO ?
+
+	vga_wcrt(NULL, 0x32, 0x00);
+	vga_wcrt(NULL, 0x34, 0x00);
+	vga_wcrt(NULL, 0x6A, 0x80);
+	vga_wcrt(NULL, 0x6A, 0xC0);
+
+	vga_wgfx(NULL, 0x20, 0x00);
+	vga_wgfx(NULL, 0x21, 0x00);
+	vga_wgfx(NULL, 0x22, 0x00);
+
+	/* Set SR15 according to number of bits per pixel */
+	mode = svga_match_format(vt8623fb_formats, &(info->var), &(info->fix));
+	switch (mode) {
+	case 0:
+		pr_debug("fb%d: text mode\n", info->node);
+		svga_set_textmode_vga_regs();
+		svga_wseq_mask(0x15, 0x00, 0xFE);
+		svga_wcrt_mask(0x11, 0x60, 0x70);
+		break;
+	case 1:
+		pr_debug("fb%d: 4 bit pseudocolor\n", info->node);
+		vga_wgfx(NULL, VGA_GFX_MODE, 0x40);
+		svga_wseq_mask(0x15, 0x20, 0xFE);
+		svga_wcrt_mask(0x11, 0x00, 0x70);
+		break;
+	case 2:
+		pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node);
+		svga_wseq_mask(0x15, 0x00, 0xFE);
+		svga_wcrt_mask(0x11, 0x00, 0x70);
+		break;
+	case 3:
+		pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
+		svga_wseq_mask(0x15, 0x22, 0xFE);
+		break;
+	case 4:
+		pr_debug("fb%d: 5/6/5 truecolor\n", info->node);
+		svga_wseq_mask(0x15, 0xB6, 0xFE);
+		break;
+	case 5:
+		pr_debug("fb%d: 8/8/8 truecolor\n", info->node);
+		svga_wseq_mask(0x15, 0xAE, 0xFE);
+		break;
+	default:
+		printk(KERN_ERR "vt8623fb: unsupported mode - bug\n");
+		return (-EINVAL);
+	}
+
+	vt8623_set_pixclock(info, info->var.pixclock);
+	svga_set_timings(&vt8623_timing_regs, &(info->var), 1, 1,
+			 (info->var.vmode & FB_VMODE_DOUBLE) ? 2 : 1, 1,
+			 1, info->node);
+
+	memset_io(info->screen_base, 0x00, screen_size);
+
+	/* Device and screen back on */
+	svga_wcrt_mask(0x17, 0x80, 0x80);
+	svga_wcrt_mask(0x36, 0x00, 0x30);
+	svga_wseq_mask(0x01, 0x00, 0x20);
+
+	return 0;
+}
+
+
+static int vt8623fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+				u_int transp, struct fb_info *fb)
+{
+	switch (fb->var.bits_per_pixel) {
+	case 0:
+	case 4:
+		if (regno >= 16)
+			return -EINVAL;
+
+		outb(0x0F, VGA_PEL_MSK);
+		outb(regno, VGA_PEL_IW);
+		outb(red >> 10, VGA_PEL_D);
+		outb(green >> 10, VGA_PEL_D);
+		outb(blue >> 10, VGA_PEL_D);
+		break;
+	case 8:
+		if (regno >= 256)
+			return -EINVAL;
+
+		outb(0xFF, VGA_PEL_MSK);
+		outb(regno, VGA_PEL_IW);
+		outb(red >> 10, VGA_PEL_D);
+		outb(green >> 10, VGA_PEL_D);
+		outb(blue >> 10, VGA_PEL_D);
+		break;
+	case 16:
+		if (regno >= 16)
+			return 0;
+
+		if (fb->var.green.length == 5)
+			((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) |
+				((green & 0xF800) >> 6) | ((blue & 0xF800) >> 11);
+		else if (fb->var.green.length == 6)
+			((u32*)fb->pseudo_palette)[regno] = (red & 0xF800) |
+				((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
+		else
+			return -EINVAL;
+		break;
+	case 24:
+	case 32:
+		if (regno >= 16)
+			return 0;
+
+		/* ((transp & 0xFF00) << 16) */
+		((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) |
+			(green & 0xFF00) | ((blue & 0xFF00) >> 8);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+static int vt8623fb_blank(int blank_mode, struct fb_info *info)
+{
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+		pr_debug("fb%d: unblank\n", info->node);
+		svga_wcrt_mask(0x36, 0x00, 0x30);
+		svga_wseq_mask(0x01, 0x00, 0x20);
+		break;
+	case FB_BLANK_NORMAL:
+		pr_debug("fb%d: blank\n", info->node);
+		svga_wcrt_mask(0x36, 0x00, 0x30);
+		svga_wseq_mask(0x01, 0x20, 0x20);
+		break;
+	case FB_BLANK_HSYNC_SUSPEND:
+		pr_debug("fb%d: DPMS standby (hsync off)\n", info->node);
+		svga_wcrt_mask(0x36, 0x10, 0x30);
+		svga_wseq_mask(0x01, 0x20, 0x20);
+		break;
+	case FB_BLANK_VSYNC_SUSPEND:
+		pr_debug("fb%d: DPMS suspend (vsync off)\n", info->node);
+		svga_wcrt_mask(0x36, 0x20, 0x30);
+		svga_wseq_mask(0x01, 0x20, 0x20);
+		break;
+	case FB_BLANK_POWERDOWN:
+		pr_debug("fb%d: DPMS off (no sync)\n", info->node);
+		svga_wcrt_mask(0x36, 0x30, 0x30);
+		svga_wseq_mask(0x01, 0x20, 0x20);
+		break;
+	}
+
+	return 0;
+}
+
+
+static int vt8623fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	unsigned int offset;
+
+	/* Calculate the offset */
+	if (var->bits_per_pixel == 0) {
+		offset = (var->yoffset / 16) * var->xres_virtual + var->xoffset;
+		offset = offset >> 3;
+	} else {
+		offset = (var->yoffset * info->fix.line_length) +
+			 (var->xoffset * var->bits_per_pixel / 8);
+		offset = offset >> ((var->bits_per_pixel == 4) ? 2 : 1);
+	}
+
+	/* Set the offset */
+	svga_wcrt_multi(vt8623_start_address_regs, offset);
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/* Frame buffer operations */
+
+static struct fb_ops vt8623fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_open	= vt8623fb_open,
+	.fb_release	= vt8623fb_release,
+	.fb_check_var	= vt8623fb_check_var,
+	.fb_set_par	= vt8623fb_set_par,
+	.fb_setcolreg	= vt8623fb_setcolreg,
+	.fb_blank	= vt8623fb_blank,
+	.fb_pan_display	= vt8623fb_pan_display,
+	.fb_fillrect	= vt8623fb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= vt8623fb_imageblit,
+};
+
+
+/* PCI probe */
+
+static int __devinit vt8623_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct fb_info *info;
+	struct vt8623fb_info *par;
+	unsigned int memsize1, memsize2;
+	int rc;
+
+	/* Ignore secondary VGA device because there is no VGA arbitration */
+	if (! svga_primary_device(dev)) {
+		dev_info(&(dev->dev), "ignoring secondary device\n");
+		return -ENODEV;
+	}
+
+	/* Allocate and fill driver data structure */
+	info = framebuffer_alloc(sizeof(struct vt8623fb_info), NULL);
+	if (! info) {
+		dev_err(&(dev->dev), "cannot allocate memory\n");
+		return -ENOMEM;
+	}
+
+	par = info->par;
+	mutex_init(&par->open_lock);
+
+	info->flags = FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN;
+	info->fbops = &vt8623fb_ops;
+
+	/* Prepare PCI device */
+
+	rc = pci_enable_device(dev);
+	if (rc < 0) {
+		dev_err(&(dev->dev), "cannot enable PCI device\n");
+		goto err_enable_device;
+	}
+
+	rc = pci_request_regions(dev, "vt8623fb");
+	if (rc < 0) {
+		dev_err(&(dev->dev), "cannot reserve framebuffer region\n");
+		goto err_request_regions;
+	}
+
+	info->fix.smem_start = pci_resource_start(dev, 0);
+	info->fix.smem_len = pci_resource_len(dev, 0);
+	info->fix.mmio_start = pci_resource_start(dev, 1);
+	info->fix.mmio_len = pci_resource_len(dev, 1);
+
+	/* Map physical IO memory address into kernel space */
+	info->screen_base = pci_iomap(dev, 0, 0);
+	if (! info->screen_base) {
+		rc = -ENOMEM;
+		dev_err(&(dev->dev), "iomap for framebuffer failed\n");
+		goto err_iomap_1;
+	}
+
+	par->mmio_base = pci_iomap(dev, 1, 0);
+	if (! par->mmio_base) {
+		rc = -ENOMEM;
+		dev_err(&(dev->dev), "iomap for MMIO failed\n");
+		goto err_iomap_2;
+	}
+
+	/* Find how many physical memory there is on card */
+	memsize1 = (vga_rseq(NULL, 0x34) + 1) >> 1;
+	memsize2 = vga_rseq(NULL, 0x39) << 2;
+
+	if ((16 <= memsize1) && (memsize1 <= 64) && (memsize1 == memsize2))
+		info->screen_size = memsize1 << 20;
+	else {
+		dev_err(&(dev->dev), "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
+		info->screen_size = 16 << 20;
+	}
+
+	info->fix.smem_len = info->screen_size;
+	strcpy(info->fix.id, "VIA VT8623");
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	info->fix.ypanstep = 0;
+	info->fix.accel = FB_ACCEL_NONE;
+	info->pseudo_palette = (void*)par->pseudo_palette;
+
+	/* Prepare startup mode */
+
+	rc = fb_find_mode(&(info->var), info, mode, NULL, 0, NULL, 8);
+	if (! ((rc == 1) || (rc == 2))) {
+		rc = -EINVAL;
+		dev_err(&(dev->dev), "mode %s not found\n", mode);
+		goto err_find_mode;
+	}
+
+	rc = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (rc < 0) {
+		dev_err(&(dev->dev), "cannot allocate colormap\n");
+		goto err_alloc_cmap;
+	}
+
+	rc = register_framebuffer(info);
+	if (rc < 0) {
+		dev_err(&(dev->dev), "cannot register framebugger\n");
+		goto err_reg_fb;
+	}
+
+	printk(KERN_INFO "fb%d: %s on %s, %d MB RAM\n", info->node, info->fix.id,
+		 pci_name(dev), info->fix.smem_len >> 20);
+
+	/* Record a reference to the driver data */
+	pci_set_drvdata(dev, info);
+
+#ifdef CONFIG_MTRR
+	if (mtrr) {
+		par->mtrr_reg = -1;
+		par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
+	}
+#endif
+
+	return 0;
+
+	/* Error handling */
+err_reg_fb:
+	fb_dealloc_cmap(&info->cmap);
+err_alloc_cmap:
+err_find_mode:
+	pci_iounmap(dev, par->mmio_base);
+err_iomap_2:
+	pci_iounmap(dev, info->screen_base);
+err_iomap_1:
+	pci_release_regions(dev);
+err_request_regions:
+/*	pci_disable_device(dev); */
+err_enable_device:
+	framebuffer_release(info);
+	return rc;
+}
+
+/* PCI remove */
+
+static void __devexit vt8623_pci_remove(struct pci_dev *dev)
+{
+	struct fb_info *info = pci_get_drvdata(dev);
+	struct vt8623fb_info *par = info->par;
+
+	if (info) {
+#ifdef CONFIG_MTRR
+		if (par->mtrr_reg >= 0) {
+			mtrr_del(par->mtrr_reg, 0, 0);
+			par->mtrr_reg = -1;
+		}
+#endif
+
+		unregister_framebuffer(info);
+		fb_dealloc_cmap(&info->cmap);
+
+		pci_iounmap(dev, info->screen_base);
+		pci_iounmap(dev, par->mmio_base);
+		pci_release_regions(dev);
+/*		pci_disable_device(dev); */
+
+		pci_set_drvdata(dev, NULL);
+		framebuffer_release(info);
+	}
+}
+
+
+#ifdef CONFIG_PM
+/* PCI suspend */
+
+static int vt8623_pci_suspend(struct pci_dev* dev, pm_message_t state)
+{
+	struct fb_info *info = pci_get_drvdata(dev);
+	struct vt8623fb_info *par = info->par;
+
+	dev_info(&(dev->dev), "suspend\n");
+
+	acquire_console_sem();
+	mutex_lock(&(par->open_lock));
+
+	if ((state.event == PM_EVENT_FREEZE) || (par->ref_count == 0)) {
+		mutex_unlock(&(par->open_lock));
+		release_console_sem();
+		return 0;
+	}
+
+	fb_set_suspend(info, 1);
+
+	pci_save_state(dev);
+	pci_disable_device(dev);
+	pci_set_power_state(dev, pci_choose_state(dev, state));
+
+	mutex_unlock(&(par->open_lock));
+	release_console_sem();
+
+	return 0;
+}
+
+
+/* PCI resume */
+
+static int vt8623_pci_resume(struct pci_dev* dev)
+{
+	struct fb_info *info = pci_get_drvdata(dev);
+	struct vt8623fb_info *par = info->par;
+
+	dev_info(&(dev->dev), "resume\n");
+
+	acquire_console_sem();
+	mutex_lock(&(par->open_lock));
+
+	if (par->ref_count == 0) {
+		mutex_unlock(&(par->open_lock));
+		release_console_sem();
+		return 0;
+	}
+
+	pci_set_power_state(dev, PCI_D0);
+	pci_restore_state(dev);
+
+	if (pci_enable_device(dev))
+		goto fail;
+
+	pci_set_master(dev);
+
+	vt8623fb_set_par(info);
+	fb_set_suspend(info, 0);
+
+	mutex_unlock(&(par->open_lock));
+fail:
+	release_console_sem();
+
+	return 0;
+}
+#else
+#define vt8623_pci_suspend NULL
+#define vt8623_pci_resume NULL
+#endif /* CONFIG_PM */
+
+/* List of boards that we are trying to support */
+
+static struct pci_device_id vt8623_devices[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_VIA, 0x3122)},
+	{0, 0, 0, 0, 0, 0, 0}
+};
+
+MODULE_DEVICE_TABLE(pci, vt8623_devices);
+
+static struct pci_driver vt8623fb_pci_driver = {
+	.name		= "vt8623fb",
+	.id_table	= vt8623_devices,
+	.probe		= vt8623_pci_probe,
+	.remove		= __devexit_p(vt8623_pci_remove),
+	.suspend	= vt8623_pci_suspend,
+	.resume		= vt8623_pci_resume,
+};
+
+/* Cleanup */
+
+static void __exit vt8623fb_cleanup(void)
+{
+	pr_debug("vt8623fb: cleaning up\n");
+	pci_unregister_driver(&vt8623fb_pci_driver);
+}
+
+/* Driver Initialisation */
+
+int __init vt8623fb_init(void)
+{
+
+#ifndef MODULE
+	char *option = NULL;
+
+	if (fb_get_options("vt8623fb", &option))
+		return -ENODEV;
+
+	if (option && *option)
+		mode = option;
+#endif
+
+	pr_debug("vt8623fb: initializing\n");
+	return pci_register_driver(&vt8623fb_pci_driver);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* Modularization */
+
+module_init(vt8623fb_init);
+module_exit(vt8623fb_cleanup);