Merge commit 'v2.6.36-rc7' into core/rcu

Merge reason: Update from -rc3 to -rc7.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

CREDITS

@@ -3554,12 +3554,12 @@ E: cvance@nai.com
 D: portions of the Linux Security Module (LSM) framework and security modules
 
 N: Petr Vandrovec
-E: vandrove@vc.cvut.cz
+E: petr@vandrovec.name
 D: Small contributions to ncpfs
 D: Matrox framebuffer driver
-S: Chudenicka 8
-S: 10200 Prague 10, Hostivar
-S: Czech Republic
+S: 21513 Conradia Ct
+S: Cupertino, CA 95014
+S: USA
 
 N: Thibaut Varene
 E: T-Bone@parisc-linux.org

Documentation/DocBook/device-drivers.tmpl

@@ -46,7 +46,6 @@
 
      <sect1><title>Atomic and pointer manipulation</title>
 !Iarch/x86/include/asm/atomic.h
-!Iarch/x86/include/asm/unaligned.h
      </sect1>
 
      <sect1><title>Delaying, scheduling, and timer routines</title>

Documentation/DocBook/kernel-api.tmpl

@@ -57,7 +57,6 @@
      </para>
 
      <sect1><title>String Conversions</title>
-!Ilib/vsprintf.c
 !Elib/vsprintf.c
      </sect1>
      <sect1><title>String Manipulation</title>

Documentation/block/cfq-iosched.txt

@@ -0,0 +1,45 @@
+CFQ ioscheduler tunables
+========================
+
+slice_idle
+----------
+This specifies how long CFQ should idle for next request on certain cfq queues
+(for sequential workloads) and service trees (for random workloads) before
+queue is expired and CFQ selects next queue to dispatch from.
+
+By default slice_idle is a non-zero value. That means by default we idle on
+queues/service trees. This can be very helpful on highly seeky media like
+single spindle SATA/SAS disks where we can cut down on overall number of
+seeks and see improved throughput.
+
+Setting slice_idle to 0 will remove all the idling on queues/service tree
+level and one should see an overall improved throughput on faster storage
+devices like multiple SATA/SAS disks in hardware RAID configuration. The down
+side is that isolation provided from WRITES also goes down and notion of
+IO priority becomes weaker.
+
+So depending on storage and workload, it might be useful to set slice_idle=0.
+In general I think for SATA/SAS disks and software RAID of SATA/SAS disks
+keeping slice_idle enabled should be useful. For any configurations where
+there are multiple spindles behind single LUN (Host based hardware RAID
+controller or for storage arrays), setting slice_idle=0 might end up in better
+throughput and acceptable latencies.
+
+CFQ IOPS Mode for group scheduling
+===================================
+Basic CFQ design is to provide priority based time slices. Higher priority
+process gets bigger time slice and lower priority process gets smaller time
+slice. Measuring time becomes harder if storage is fast and supports NCQ and
+it would be better to dispatch multiple requests from multiple cfq queues in
+request queue at a time. In such scenario, it is not possible to measure time
+consumed by single queue accurately.
+
+What is possible though is to measure number of requests dispatched from a
+single queue and also allow dispatch from multiple cfq queue at the same time.
+This effectively becomes the fairness in terms of IOPS (IO operations per
+second).
+
+If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
+to IOPS mode and starts providing fairness in terms of number of requests
+dispatched. Note that this mode switching takes effect only for group
+scheduling. For non-cgroup users nothing should change.

Documentation/cgroups/blkio-controller.txt

@@ -217,6 +217,7 @@ Details of cgroup files
 CFQ sysfs tunable
 =================
 /sys/block/<disk>/queue/iosched/group_isolation
+-----------------------------------------------
 
 If group_isolation=1, it provides stronger isolation between groups at the
 expense of throughput. By default group_isolation is 0. In general that
@@ -243,6 +244,33 @@ By default one should run with group_isolation=0. If that is not sufficient
 and one wants stronger isolation between groups, then set group_isolation=1
 but this will come at cost of reduced throughput.
 
+/sys/block/<disk>/queue/iosched/slice_idle
+------------------------------------------
+On a faster hardware CFQ can be slow, especially with sequential workload.
+This happens because CFQ idles on a single queue and single queue might not
+drive deeper request queue depths to keep the storage busy. In such scenarios
+one can try setting slice_idle=0 and that would switch CFQ to IOPS
+(IO operations per second) mode on NCQ supporting hardware.
+
+That means CFQ will not idle between cfq queues of a cfq group and hence be
+able to driver higher queue depth and achieve better throughput. That also
+means that cfq provides fairness among groups in terms of IOPS and not in
+terms of disk time.
+
+/sys/block/<disk>/queue/iosched/group_idle
+------------------------------------------
+If one disables idling on individual cfq queues and cfq service trees by
+setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
+on the group in an attempt to provide fairness among groups.
+
+By default group_idle is same as slice_idle and does not do anything if
+slice_idle is enabled.
+
+One can experience an overall throughput drop if you have created multiple
+groups and put applications in that group which are not driving enough
+IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
+on individual groups and throughput should improve.
+
 What works
 ==========
 - Currently only sync IO queues are support. All the buffered writes are

Documentation/hwmon/sysfs-interface

@@ -91,12 +91,11 @@ name		The chip name.
 		I2C devices get this attribute created automatically.
 		RO
 
-update_rate	The rate at which the chip will update readings.
+update_interval	The interval at which the chip will update readings.
 		Unit: millisecond
 		RW
-		Some devices have a variable update rate. This attribute
-		can be used to change the update rate to the desired
-		frequency.
+		Some devices have a variable update rate or interval.
+		This attribute can be used to change it to the desired value.
 
 
 ************

Documentation/kernel-doc-nano-HOWTO.txt

@@ -345,5 +345,10 @@ documentation, in <filename>, for the functions listed.
 section titled <section title> from <filename>.
 Spaces are allowed in <section title>; do not quote the <section title>.
 
+!C<filename> is replaced by nothing, but makes the tools check that
+all DOC: sections and documented functions, symbols, etc. are used.
+This makes sense to use when you use !F/!P only and want to verify
+that all documentation is included.
+
 Tim.
 */ <twaugh@redhat.com>

Documentation/power/regulator/overview.txt

@@ -13,7 +13,7 @@ regulators (where voltage output is controllable) and current sinks (where
 current limit is controllable).
 
 (C) 2008  Wolfson Microelectronics PLC.
-Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Author: Liam Girdwood <lrg@slimlogic.co.uk>
 
 
 Nomenclature

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -296,6 +296,7 @@ Conexant 5051
 Conexant 5066
 =============
   laptop	Basic Laptop config (default)
+  hp-laptop	HP laptops, e g G60
   dell-laptop	Dell laptops
   dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5

Documentation/workqueue.txt

@@ -0,0 +1,380 @@
+
+Concurrency Managed Workqueue (cmwq)
+
+September, 2010		Tejun Heo <tj@kernel.org>
+			Florian Mickler <florian@mickler.org>
+
+CONTENTS
+
+1. Introduction
+2. Why cmwq?
+3. The Design
+4. Application Programming Interface (API)
+5. Example Execution Scenarios
+6. Guidelines
+
+
+1. Introduction
+
+There are many cases where an asynchronous process execution context
+is needed and the workqueue (wq) API is the most commonly used
+mechanism for such cases.
+
+When such an asynchronous execution context is needed, a work item
+describing which function to execute is put on a queue.  An
+independent thread serves as the asynchronous execution context.  The
+queue is called workqueue and the thread is called worker.
+
+While there are work items on the workqueue the worker executes the
+functions associated with the work items one after the other.  When
+there is no work item left on the workqueue the worker becomes idle.
+When a new work item gets queued, the worker begins executing again.
+
+
+2. Why cmwq?
+
+In the original wq implementation, a multi threaded (MT) wq had one
+worker thread per CPU and a single threaded (ST) wq had one worker
+thread system-wide.  A single MT wq needed to keep around the same
+number of workers as the number of CPUs.  The kernel grew a lot of MT
+wq users over the years and with the number of CPU cores continuously
+rising, some systems saturated the default 32k PID space just booting
+up.
+
+Although MT wq wasted a lot of resource, the level of concurrency
+provided was unsatisfactory.  The limitation was common to both ST and
+MT wq albeit less severe on MT.  Each wq maintained its own separate
+worker pool.  A MT wq could provide only one execution context per CPU
+while a ST wq one for the whole system.  Work items had to compete for
+those very limited execution contexts leading to various problems
+including proneness to deadlocks around the single execution context.
+
+The tension between the provided level of concurrency and resource
+usage also forced its users to make unnecessary tradeoffs like libata
+choosing to use ST wq for polling PIOs and accepting an unnecessary
+limitation that no two polling PIOs can progress at the same time.  As
+MT wq don't provide much better concurrency, users which require
+higher level of concurrency, like async or fscache, had to implement
+their own thread pool.
+
+Concurrency Managed Workqueue (cmwq) is a reimplementation of wq with
+focus on the following goals.
+
+* Maintain compatibility with the original workqueue API.
+
+* Use per-CPU unified worker pools shared by all wq to provide
+  flexible level of concurrency on demand without wasting a lot of
+  resource.
+
+* Automatically regulate worker pool and level of concurrency so that
+  the API users don't need to worry about such details.
+
+
+3. The Design
+
+In order to ease the asynchronous execution of functions a new
+abstraction, the work item, is introduced.
+
+A work item is a simple struct that holds a pointer to the function
+that is to be executed asynchronously.  Whenever a driver or subsystem
+wants a function to be executed asynchronously it has to set up a work
+item pointing to that function and queue that work item on a
+workqueue.
+
+Special purpose threads, called worker threads, execute the functions
+off of the queue, one after the other.  If no work is queued, the
+worker threads become idle.  These worker threads are managed in so
+called thread-pools.
+
+The cmwq design differentiates between the user-facing workqueues that
+subsystems and drivers queue work items on and the backend mechanism
+which manages thread-pool and processes the queued work items.
+
+The backend is called gcwq.  There is one gcwq for each possible CPU
+and one gcwq to serve work items queued on unbound workqueues.
+
+Subsystems and drivers can create and queue work items through special
+workqueue API functions as they see fit. They can influence some
+aspects of the way the work items are executed by setting flags on the
+workqueue they are putting the work item on. These flags include
+things like CPU locality, reentrancy, concurrency limits and more. To
+get a detailed overview refer to the API description of
+alloc_workqueue() below.
+
+When a work item is queued to a workqueue, the target gcwq is
+determined according to the queue parameters and workqueue attributes
+and appended on the shared worklist of the gcwq.  For example, unless
+specifically overridden, a work item of a bound workqueue will be
+queued on the worklist of exactly that gcwq that is associated to the
+CPU the issuer is running on.
+
+For any worker pool implementation, managing the concurrency level
+(how many execution contexts are active) is an important issue.  cmwq
+tries to keep the concurrency at a minimal but sufficient level.
+Minimal to save resources and sufficient in that the system is used at
+its full capacity.
+
+Each gcwq bound to an actual CPU implements concurrency management by
+hooking into the scheduler.  The gcwq is notified whenever an active
+worker wakes up or sleeps and keeps track of the number of the
+currently runnable workers.  Generally, work items are not expected to
+hog a CPU and consume many cycles.  That means maintaining just enough
+concurrency to prevent work processing from stalling should be
+optimal.  As long as there are one or more runnable workers on the
+CPU, the gcwq doesn't start execution of a new work, but, when the
+last running worker goes to sleep, it immediately schedules a new
+worker so that the CPU doesn't sit idle while there are pending work
+items.  This allows using a minimal number of workers without losing
+execution bandwidth.
+
+Keeping idle workers around doesn't cost other than the memory space
+for kthreads, so cmwq holds onto idle ones for a while before killing
+them.
+
+For an unbound wq, the above concurrency management doesn't apply and
+the gcwq for the pseudo unbound CPU tries to start executing all work
+items as soon as possible.  The responsibility of regulating
+concurrency level is on the users.  There is also a flag to mark a
+bound wq to ignore the concurrency management.  Please refer to the
+API section for details.
+
+Forward progress guarantee relies on that workers can be created when
+more execution contexts are necessary, which in turn is guaranteed
+through the use of rescue workers.  All work items which might be used
+on code paths that handle memory reclaim are required to be queued on
+wq's that have a rescue-worker reserved for execution under memory
+pressure.  Else it is possible that the thread-pool deadlocks waiting
+for execution contexts to free up.
+
+
+4. Application Programming Interface (API)
+
+alloc_workqueue() allocates a wq.  The original create_*workqueue()
+functions are deprecated and scheduled for removal.  alloc_workqueue()
+takes three arguments - @name, @flags and @max_active.  @name is the
+name of the wq and also used as the name of the rescuer thread if
+there is one.
+
+A wq no longer manages execution resources but serves as a domain for
+forward progress guarantee, flush and work item attributes.  @flags
+and @max_active control how work items are assigned execution
+resources, scheduled and executed.
+
+@flags:
+
+  WQ_NON_REENTRANT
+
+	By default, a wq guarantees non-reentrance only on the same
+	CPU.  A work item may not be executed concurrently on the same
+	CPU by multiple workers but is allowed to be executed
+	concurrently on multiple CPUs.  This flag makes sure
+	non-reentrance is enforced across all CPUs.  Work items queued
+	to a non-reentrant wq are guaranteed to be executed by at most
+	one worker system-wide at any given time.
+
+  WQ_UNBOUND
+
+	Work items queued to an unbound wq are served by a special
+	gcwq which hosts workers which are not bound to any specific
+	CPU.  This makes the wq behave as a simple execution context
+	provider without concurrency management.  The unbound gcwq
+	tries to start execution of work items as soon as possible.
+	Unbound wq sacrifices locality but is useful for the following
+	cases.
+
+	* Wide fluctuation in the concurrency level requirement is
+	  expected and using bound wq may end up creating large number
+	  of mostly unused workers across different CPUs as the issuer
+	  hops through different CPUs.
+
+	* Long running CPU intensive workloads which can be better
+	  managed by the system scheduler.
+
+  WQ_FREEZEABLE
+
+	A freezeable wq participates in the freeze phase of the system
+	suspend operations.  Work items on the wq are drained and no
+	new work item starts execution until thawed.
+
+  WQ_RESCUER
+
+	All wq which might be used in the memory reclaim paths _MUST_
+	have this flag set.  This reserves one worker exclusively for
+	the execution of this wq under memory pressure.
+
+  WQ_HIGHPRI
+
+	Work items of a highpri wq are queued at the head of the
+	worklist of the target gcwq and start execution regardless of
+	the current concurrency level.  In other words, highpri work
+	items will always start execution as soon as execution
+	resource is available.
+
+	Ordering among highpri work items is preserved - a highpri
+	work item queued after another highpri work item will start
+	execution after the earlier highpri work item starts.
+
+	Although highpri work items are not held back by other
+	runnable work items, they still contribute to the concurrency
+	level.  Highpri work items in runnable state will prevent
+	non-highpri work items from starting execution.
+
+	This flag is meaningless for unbound wq.
+
+  WQ_CPU_INTENSIVE
+
+	Work items of a CPU intensive wq do not contribute to the
+	concurrency level.  In other words, runnable CPU intensive
+	work items will not prevent other work items from starting
+	execution.  This is useful for bound work items which are
+	expected to hog CPU cycles so that their execution is
+	regulated by the system scheduler.
+
+	Although CPU intensive work items don't contribute to the
+	concurrency level, start of their executions is still
+	regulated by the concurrency management and runnable
+	non-CPU-intensive work items can delay execution of CPU
+	intensive work items.
+
+	This flag is meaningless for unbound wq.
+
+  WQ_HIGHPRI | WQ_CPU_INTENSIVE
+
+	This combination makes the wq avoid interaction with
+	concurrency management completely and behave as a simple
+	per-CPU execution context provider.  Work items queued on a
+	highpri CPU-intensive wq start execution as soon as resources
+	are available and don't affect execution of other work items.
+
+@max_active:
+
+@max_active determines the maximum number of execution contexts per
+CPU which can be assigned to the work items of a wq.  For example,
+with @max_active of 16, at most 16 work items of the wq can be
+executing at the same time per CPU.
+
+Currently, for a bound wq, the maximum limit for @max_active is 512
+and the default value used when 0 is specified is 256.  For an unbound
+wq, the limit is higher of 512 and 4 * num_possible_cpus().  These
+values are chosen sufficiently high such that they are not the
+limiting factor while providing protection in runaway cases.
+
+The number of active work items of a wq is usually regulated by the
+users of the wq, more specifically, by how many work items the users
+may queue at the same time.  Unless there is a specific need for
+throttling the number of active work items, specifying '0' is
+recommended.
+
+Some users depend on the strict execution ordering of ST wq.  The
+combination of @max_active of 1 and WQ_UNBOUND is used to achieve this
+behavior.  Work items on such wq are always queued to the unbound gcwq
+and only one work item can be active at any given time thus achieving
+the same ordering property as ST wq.
+
+
+5. Example Execution Scenarios
+
+The following example execution scenarios try to illustrate how cmwq
+behave under different configurations.
+
+ Work items w0, w1, w2 are queued to a bound wq q0 on the same CPU.
+ w0 burns CPU for 5ms then sleeps for 10ms then burns CPU for 5ms
+ again before finishing.  w1 and w2 burn CPU for 5ms then sleep for
+ 10ms.
+
+Ignoring all other tasks, works and processing overhead, and assuming
+simple FIFO scheduling, the following is one highly simplified version
+of possible sequences of events with the original wq.
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 starts and burns CPU
+ 25		w1 sleeps
+ 35		w1 wakes up and finishes
+ 35		w2 starts and burns CPU
+ 40		w2 sleeps
+ 50		w2 wakes up and finishes
+
+And with cmwq with @max_active >= 3,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 starts and burns CPU
+ 10		w1 sleeps
+ 10		w2 starts and burns CPU
+ 15		w2 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 25		w2 wakes up and finishes
+
+If @max_active == 2,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 starts and burns CPU
+ 10		w1 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 20		w2 starts and burns CPU
+ 25		w2 sleeps
+ 35		w2 wakes up and finishes
+
+Now, let's assume w1 and w2 are queued to a different wq q1 which has
+WQ_HIGHPRI set,
+
+ TIME IN MSECS	EVENT
+ 0		w1 and w2 start and burn CPU
+ 5		w1 sleeps
+ 10		w2 sleeps
+ 10		w0 starts and burns CPU
+ 15		w0 sleeps
+ 15		w1 wakes up and finishes
+ 20		w2 wakes up and finishes
+ 25		w0 wakes up and burns CPU
+ 30		w0 finishes
+
+If q1 has WQ_CPU_INTENSIVE set,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 and w2 start and burn CPU
+ 10		w1 sleeps
+ 15		w2 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 25		w2 wakes up and finishes
+
+
+6. Guidelines
+
+* Do not forget to use WQ_RESCUER if a wq may process work items which
+  are used during memory reclaim.  Each wq with WQ_RESCUER set has one
+  rescuer thread reserved for it.  If there is dependency among
+  multiple work items used during memory reclaim, they should be
+  queued to separate wq each with WQ_RESCUER.
+
+* Unless strict ordering is required, there is no need to use ST wq.
+
+* Unless there is a specific need, using 0 for @max_active is
+  recommended.  In most use cases, concurrency level usually stays
+  well under the default limit.
+
+* A wq serves as a domain for forward progress guarantee (WQ_RESCUER),
+  flush and work item attributes.  Work items which are not involved
+  in memory reclaim and don't need to be flushed as a part of a group
+  of work items, and don't require any special attribute, can use one
+  of the system wq.  There is no difference in execution
+  characteristics between using a dedicated wq and a system wq.
+
+* Unless work items are expected to consume a huge amount of CPU
+  cycles, using a bound wq is usually beneficial due to the increased
+  level of locality in wq operations and work item execution.

MAINTAINERS

@@ -962,6 +962,13 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c6410/
 
+ARM/S5P ARM ARCHITECTURES
+M:	Kukjin Kim <kgene.kim@samsung.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-s5p*/
+
 ARM/SHMOBILE ARM ARCHITECTURE
 M:	Paul Mundt <lethal@linux-sh.org>
 M:	Magnus Damm <magnus.damm@gmail.com>
@@ -1135,7 +1142,7 @@ ATLX ETHERNET DRIVERS
 M:	Jay Cliburn <jcliburn@gmail.com>
 M:	Chris Snook <chris.snook@gmail.com>
 M:	Jie Yang <jie.yang@atheros.com>
-L:	atl1-devel@lists.sourceforge.net
+L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
 S:	Maintained
@@ -1220,7 +1227,7 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
@@ -1228,7 +1235,7 @@ S:	Supported
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 S:	Supported
 F:	arch/avr32/mach-at32ap/
 
@@ -1445,6 +1452,16 @@ S:	Maintained
 F:	Documentation/video4linux/cafe_ccic
 F:	drivers/media/video/cafe_ccic*
 
+CAIF NETWORK LAYER
+M:	Sjur Braendeland <sjur.brandeland@stericsson.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	Documentation/networking/caif/
+F:	drivers/net/caif/
+F:	include/linux/caif/
+F:	include/net/caif/
+F:	net/caif/
+
 CALGARY x86-64 IOMMU
 M:	Muli Ben-Yehuda <muli@il.ibm.com>
 M:	"Jon D. Mason" <jdmason@kudzu.us>
@@ -2189,6 +2206,12 @@ W:	http://acpi4asus.sf.net
 S:	Maintained
 F:	drivers/platform/x86/eeepc-laptop.c
 
+EFIFB FRAMEBUFFER DRIVER
+L:	linux-fbdev@vger.kernel.org
+M:	Peter Jones <pjones@redhat.com>
+S:	Maintained
+F:	drivers/video/efifb.c
+
 EFS FILESYSTEM
 W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
@@ -2647,9 +2670,14 @@ S:	Maintained
 F:	drivers/media/video/gspca/
 
 HARDWARE MONITORING
+M:	Jean Delvare <khali@linux-fr.org>
+M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-S:	Orphan
+T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
+S:	Maintained
 F:	Documentation/hwmon/
 F:	drivers/hwmon/
 F:	include/linux/hwmon*.h
@@ -3760,9 +3788,8 @@ W:	http://www.syskonnect.com
 S:	Supported
 
 MATROX FRAMEBUFFER DRIVER
-M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linux-fbdev@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
@@ -3886,10 +3913,8 @@ F:	Documentation/serial/moxa-smartio
 F:	drivers/char/mxser.*
 
 MSI LAPTOP SUPPORT
-M:	Lennart Poettering <mzxreary@0pointer.de>
+M:	Lee, Chun-Yi <jlee@novell.com>
 L:	platform-driver-x86@vger.kernel.org
-W:	https://tango.0pointer.de/mailman/listinfo/s270-linux
-W:	http://0pointer.de/lennart/tchibo.html
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
 
@@ -3906,8 +3931,10 @@ S:	Supported
 F:	drivers/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-S:	Orphan
+M:	Chris Ball <cjb@laptop.org>
 L:	linux-mmc@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
 
@@ -3929,7 +3956,7 @@ F:	drivers/char/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	Felipe Balbi <balbi@ti.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://gitorious.org/usb/usb.git
 S:	Maintained
@@ -3949,8 +3976,8 @@ S:	Maintained
 F:	drivers/net/natsemi.c
 
 NCP FILESYSTEM
-M:	Petr Vandrovec <vandrove@vc.cvut.cz>
-S:	Maintained
+M:	Petr Vandrovec <petr@vandrovec.name>
+S:	Odd Fixes
 F:	fs/ncpfs/
 
 NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
@@ -4227,7 +4254,7 @@ S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP USB SUPPORT
-M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	Felipe Balbi <balbi@ti.com>
 M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
@@ -5078,8 +5105,10 @@ S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S:	Orphan
+M:	Chris Ball <cjb@laptop.org>
 L:	linux-mmc@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S:	Maintained
 F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 36
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc7
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -32,8 +32,9 @@ config HAVE_OPROFILE
 
 config KPROBES
 	bool "Kprobes"
-	depends on KALLSYMS && MODULES
+	depends on MODULES
 	depends on HAVE_KPROBES
+	select KALLSYMS
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
@@ -45,7 +46,6 @@ config OPTPROBES
 	def_bool y
 	depends on KPROBES && HAVE_OPTPROBES
 	depends on !PREEMPT
-	select KALLSYMS_ALL
 
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool

arch/alpha/include/asm/cacheflush.h

@@ -43,6 +43,8 @@ extern void smp_imb(void);
 /* ??? Ought to use this in arch/alpha/kernel/signal.c too.  */
 
 #ifndef CONFIG_SMP
+#include <linux/sched.h>
+
 extern void __load_new_mm_context(struct mm_struct *);
 static inline void
 flush_icache_user_range(struct vm_area_struct *vma, struct page *page,

arch/alpha/include/asm/unistd.h

@@ -449,10 +449,13 @@
 #define __NR_pwritev			491
 #define __NR_rt_tgsigqueueinfo		492
 #define __NR_perf_event_open		493
+#define __NR_fanotify_init		494
+#define __NR_fanotify_mark		495
+#define __NR_prlimit64			496
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			494
+#define NR_SYSCALLS			497
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
@@ -463,6 +466,7 @@
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 /* "Conditional" syscalls.  What we want is
 

arch/alpha/kernel/entry.S

@@ -73,8 +73,6 @@
 	ldq	$20, HAE_REG($19);	\
 	stq	$21, HAE_CACHE($19);	\
 	stq	$21, 0($20);		\
-	ldq	$0, 0($sp);		\
-	ldq	$1, 8($sp);		\
 99:;					\
 	ldq	$19, 72($sp);		\
 	ldq	$20, 80($sp);		\
@@ -316,19 +314,24 @@ ret_from_sys_call:
 	cmovne	$26, 0, $19		/* $19 = 0 => non-restartable */
 	ldq	$0, SP_OFF($sp)
 	and	$0, 8, $0
-	beq	$0, restore_all
-ret_from_reschedule:
+	beq	$0, ret_to_kernel
+ret_to_user:
 	/* Make sure need_resched and sigpending don't change between
 		sampling and the rti.  */
 	lda	$16, 7
 	call_pal PAL_swpipl
 	ldl	$5, TI_FLAGS($8)
 	and	$5, _TIF_WORK_MASK, $2
-	bne	$5, work_pending
+	bne	$2, work_pending
 restore_all:
 	RESTORE_ALL
 	call_pal PAL_rti
 
+ret_to_kernel:
+	lda	$16, 7
+	call_pal PAL_swpipl
+	br restore_all
+
 	.align 3
 $syscall_error:
 	/*
@@ -363,7 +366,7 @@ $ret_success:
  *       $8: current.
  *      $19: The old syscall number, or zero if this is not a return
  *           from a syscall that errored and is possibly restartable.
- *      $20: Error indication.
+ *      $20: The old a3 value
  */
 
 	.align	4
@@ -392,12 +395,18 @@ $work_resched:
 
 $work_notifysig:
 	mov	$sp, $16
-	br	$1, do_switch_stack
+	bsr	$1, do_switch_stack
 	mov	$sp, $17
 	mov	$5, $18
+	mov	$19, $9		/* save old syscall number */
+	mov	$20, $10	/* save old a3 */
+	and	$5, _TIF_SIGPENDING, $2
+	cmovne	$2, 0, $9	/* we don't want double syscall restarts */
 	jsr	$26, do_notify_resume
+	mov	$9, $19
+	mov	$10, $20
 	bsr	$1, undo_switch_stack
-	br	restore_all
+	br	ret_to_user
 .end work_pending
 
 /*
@@ -430,6 +439,7 @@ strace:
 	beq	$1, 1f
 	ldq	$27, 0($2)
 1:	jsr	$26, ($27), sys_gettimeofday
+ret_from_straced:
 	ldgp	$gp, 0($26)
 
 	/* check return.. */
@@ -650,7 +660,7 @@ kernel_thread:
 	/* We don't actually care for a3 success widgetry in the kernel.
 	   Not for positive errno values.  */
 	stq	$0, 0($sp)		/* $0 */
-	br	restore_all
+	br	ret_to_kernel
 .end kernel_thread
 
 /*
@@ -757,11 +767,15 @@ sys_vfork:
 	.ent	sys_sigreturn
 sys_sigreturn:
 	.prologue 0
+	lda	$9, ret_from_straced
+	cmpult	$26, $9, $9
 	mov	$sp, $17
 	lda	$18, -SWITCH_STACK_SIZE($sp)
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_sigreturn
-	br	$1, undo_switch_stack
+	bne	$9, 1f
+	jsr	$26, syscall_trace
+1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_sigreturn
 
@@ -770,46 +784,18 @@ sys_sigreturn:
 	.ent	sys_rt_sigreturn
 sys_rt_sigreturn:
 	.prologue 0
+	lda	$9, ret_from_straced
+	cmpult	$26, $9, $9
 	mov	$sp, $17
 	lda	$18, -SWITCH_STACK_SIZE($sp)
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_rt_sigreturn
-	br	$1, undo_switch_stack
+	bne	$9, 1f
+	jsr	$26, syscall_trace
+1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_rt_sigreturn
 
-	.align	4
-	.globl	sys_sigsuspend
-	.ent	sys_sigsuspend
-sys_sigsuspend:
-	.prologue 0
-	mov	$sp, $17
-	br	$1, do_switch_stack
-	mov	$sp, $18
-	subq	$sp, 16, $sp
-	stq	$26, 0($sp)
-	jsr	$26, do_sigsuspend
-	ldq	$26, 0($sp)
-	lda	$sp, SWITCH_STACK_SIZE+16($sp)
-	ret
-.end sys_sigsuspend
-
-	.align	4
-	.globl	sys_rt_sigsuspend
-	.ent	sys_rt_sigsuspend
-sys_rt_sigsuspend:
-	.prologue 0
-	mov	$sp, $18
-	br	$1, do_switch_stack
-	mov	$sp, $19
-	subq	$sp, 16, $sp
-	stq	$26, 0($sp)
-	jsr	$26, do_rt_sigsuspend
-	ldq	$26, 0($sp)
-	lda	$sp, SWITCH_STACK_SIZE+16($sp)
-	ret
-.end sys_rt_sigsuspend
-
 	.align	4
 	.globl	sys_sethae
 	.ent	sys_sethae
@@ -928,15 +914,6 @@ sys_execve:
 	jmp	$31, do_sys_execve
 .end sys_execve
 
-	.align	4
-	.globl	osf_sigprocmask
-	.ent	osf_sigprocmask
-osf_sigprocmask:
-	.prologue 0
-	mov	$sp, $18
-	jmp	$31, sys_osf_sigprocmask
-.end osf_sigprocmask
-
 	.align	4
 	.globl	alpha_ni_syscall
 	.ent	alpha_ni_syscall

arch/alpha/kernel/err_ev6.c

@@ -90,11 +90,13 @@ static int
 ev6_parse_cbox(u64 c_addr, u64 c1_syn, u64 c2_syn, 
 	       u64 c_stat, u64 c_sts, int print)
 {
-	char *sourcename[] = { "UNKNOWN", "UNKNOWN", "UNKNOWN",
-			       "MEMORY", "BCACHE", "DCACHE", 
-			       "BCACHE PROBE", "BCACHE PROBE" };
-	char *streamname[] = { "D", "I" };
-	char *bitsname[] = { "SINGLE", "DOUBLE" };
+	static const char * const sourcename[] = {
+		"UNKNOWN", "UNKNOWN", "UNKNOWN",
+		"MEMORY", "BCACHE", "DCACHE",
+		"BCACHE PROBE", "BCACHE PROBE"
+	};
+	static const char * const streamname[] = { "D", "I" };
+	static const char * const bitsname[] = { "SINGLE", "DOUBLE" };
 	int status = MCHK_DISPOSITION_REPORT;
 	int source = -1, stream = -1, bits = -1;
 

arch/alpha/kernel/err_marvel.c

@@ -589,22 +589,23 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
 static void
 marvel_print_pox_trans_sum(u64 trans_sum)
 {
-	char *pcix_cmd[] = { "Interrupt Acknowledge",
-			     "Special Cycle",
-			     "I/O Read",
-			     "I/O Write",
-			     "Reserved",
-			     "Reserved / Device ID Message",
-			     "Memory Read",
-			     "Memory Write",
-			     "Reserved / Alias to Memory Read Block",
-			     "Reserved / Alias to Memory Write Block",
-			     "Configuration Read",
-			     "Configuration Write",
-			     "Memory Read Multiple / Split Completion",
-			     "Dual Address Cycle",
-			     "Memory Read Line / Memory Read Block",
-			     "Memory Write and Invalidate / Memory Write Block"
+	static const char * const pcix_cmd[] = {
+		"Interrupt Acknowledge",
+		"Special Cycle",
+		"I/O Read",
+		"I/O Write",
+		"Reserved",
+		"Reserved / Device ID Message",
+		"Memory Read",
+		"Memory Write",
+		"Reserved / Alias to Memory Read Block",
+		"Reserved / Alias to Memory Write Block",
+		"Configuration Read",
+		"Configuration Write",
+		"Memory Read Multiple / Split Completion",
+		"Dual Address Cycle",
+		"Memory Read Line / Memory Read Block",
+		"Memory Write and Invalidate / Memory Write Block"
 	};
 
 #define IO7__POX_TRANSUM__PCI_ADDR__S		(0)

arch/alpha/kernel/err_titan.c

@@ -75,8 +75,12 @@ titan_parse_p_serror(int which, u64 serror, int print)
 	int status = MCHK_DISPOSITION_REPORT;
 
 #ifdef CONFIG_VERBOSE_MCHECK
-	char *serror_src[] = {"GPCI", "APCI", "AGP HP", "AGP LP"};
-	char *serror_cmd[] = {"DMA Read", "DMA RMW", "SGTE Read", "Reserved"};
+	static const char * const serror_src[] = {
+		"GPCI", "APCI", "AGP HP", "AGP LP"
+	};
+	static const char * const serror_cmd[] = {
+		"DMA Read", "DMA RMW", "SGTE Read", "Reserved"
+	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
 #define TITAN__PCHIP_SERROR__LOST_UECC	(1UL << 0)
@@ -140,14 +144,15 @@ titan_parse_p_perror(int which, int port, u64 perror, int print)
 	int status = MCHK_DISPOSITION_REPORT;
 
 #ifdef CONFIG_VERBOSE_MCHECK
-	char *perror_cmd[] = { "Interrupt Acknowledge", "Special Cycle",
-			       "I/O Read",	       	"I/O Write",
-			       "Reserved",	       	"Reserved",
-			       "Memory Read",		"Memory Write",
-			       "Reserved",		"Reserved",
-			       "Configuration Read",	"Configuration Write",
-			       "Memory Read Multiple",	"Dual Address Cycle",
-			       "Memory Read Line","Memory Write and Invalidate"
+	static const char * const perror_cmd[] = {
+		"Interrupt Acknowledge", "Special Cycle",
+		"I/O Read",		"I/O Write",
+		"Reserved",		"Reserved",
+		"Memory Read",		"Memory Write",
+		"Reserved",		"Reserved",
+		"Configuration Read",	"Configuration Write",
+		"Memory Read Multiple",	"Dual Address Cycle",
+		"Memory Read Line",	"Memory Write and Invalidate"
 	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
@@ -273,11 +278,11 @@ titan_parse_p_agperror(int which, u64 agperror, int print)
 	int cmd, len;
 	unsigned long addr;
 
-	char *agperror_cmd[] = { "Read (low-priority)",	"Read (high-priority)",
-				 "Write (low-priority)",
-				 "Write (high-priority)",
-				 "Reserved",		"Reserved",
-				 "Flush",		"Fence"
+	static const char * const agperror_cmd[] = {
+		"Read (low-priority)",	"Read (high-priority)",
+		"Write (low-priority)",	"Write (high-priority)",
+		"Reserved",		"Reserved",
+		"Flush",		"Fence"
 	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 

arch/alpha/kernel/osf_sys.c

@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/syscalls.h>
 #include <linux/unistd.h>
@@ -69,7 +68,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
 {
 	struct mm_struct *mm;
 
-	lock_kernel();
 	mm = current->mm;
 	mm->end_code = bss_start + bss_len;
 	mm->start_brk = bss_start + bss_len;
@@ -78,7 +76,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
 	printk("set_program_attributes(%lx %lx %lx %lx)\n",
 		text_start, text_len, bss_start, bss_len);
 #endif
-	unlock_kernel();
 	return 0;
 }
 
@@ -517,7 +514,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
 	long error;
 	int __user *min_buf_size_ptr;
 
-	lock_kernel();
 	switch (code) {
 	case PL_SET:
 		if (get_user(error, &args->set.nbytes))
@@ -547,7 +543,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
 		error = -EOPNOTSUPP;
 		break;
 	};
-	unlock_kernel();
 	return error;
 }
 
@@ -594,7 +589,7 @@ SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
 
 SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 {
-	char *sysinfo_table[] = {
+	const char *sysinfo_table[] = {
 		utsname()->sysname,
 		utsname()->nodename,
 		utsname()->release,
@@ -606,7 +601,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 		"dummy",	/* secure RPC domain */
 	};
 	unsigned long offset;
-	char *res;
+	const char *res;
 	long len, err = -EINVAL;
 
 	offset = command-1;

arch/alpha/kernel/pci-sysfs.c

@@ -66,7 +66,7 @@ static int pci_mmap_resource(struct kobject *kobj,
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
 						       struct device, kobj));
-	struct resource *res = (struct resource *)attr->private;
+	struct resource *res = attr->private;
 	enum pci_mmap_state mmap_type;
 	struct pci_bus_region bar;
 	int i;

arch/alpha/kernel/process.c

@@ -356,7 +356,7 @@ dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, struct thread_info *ti)
 	dest[27] = pt->r27;
 	dest[28] = pt->r28;
 	dest[29] = pt->gp;
-	dest[30] = rdusp();
+	dest[30] = ti == current_thread_info() ? rdusp() : ti->pcb.usp;
 	dest[31] = pt->pc;
 
 	/* Once upon a time this was the PS value.  Which is stupid

arch/alpha/kernel/signal.c

@@ -41,46 +41,20 @@ static void do_signal(struct pt_regs *, struct switch_stack *,
 /*
  * The OSF/1 sigprocmask calling sequence is different from the
  * C sigprocmask() sequence..
- *
- * how:
- * 1 - SIG_BLOCK
- * 2 - SIG_UNBLOCK
- * 3 - SIG_SETMASK
- *
- * We change the range to -1 .. 1 in order to let gcc easily
- * use the conditional move instructions.
- *
- * Note that we don't need to acquire the kernel lock for SMP
- * operation, as all of this is local to this thread.
  */
-SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask,
-		struct pt_regs *, regs)
+SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
 {
-	unsigned long oldmask = -EINVAL;
-
-	if ((unsigned long)how-1 <= 2) {
-		long sign = how-2;		/* -1 .. 1 */
-		unsigned long block, unblock;
-
-		newmask &= _BLOCKABLE;
-		spin_lock_irq(&current->sighand->siglock);
-		oldmask = current->blocked.sig[0];
-
-		unblock = oldmask & ~newmask;
-		block = oldmask | newmask;
-		if (!sign)
-			block = unblock;
-		if (sign <= 0)
-			newmask = block;
-		if (_NSIG_WORDS > 1 && sign > 0)
-			sigemptyset(&current->blocked);
-		current->blocked.sig[0] = newmask;
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-
-		regs->r0 = 0;		/* special no error return */
+	sigset_t oldmask;
+	sigset_t mask;
+	unsigned long res;
+
+	siginitset(&mask, newmask & _BLOCKABLE);
+	res = sigprocmask(how, &mask, &oldmask);
+	if (!res) {
+		force_successful_syscall_return();
+		res = oldmask.sig[0];
 	}
-	return oldmask;
+	return res;
 }
 
 SYSCALL_DEFINE3(osf_sigaction, int, sig,
@@ -94,9 +68,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
 		old_sigset_t mask;
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
 		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags))
+		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
+		    __get_user(mask, &act->sa_mask))
 			return -EFAULT;
-		__get_user(mask, &act->sa_mask);
 		siginitset(&new_ka.sa.sa_mask, mask);
 		new_ka.ka_restorer = NULL;
 	}
@@ -106,9 +80,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
 	if (!ret && oact) {
 		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
 		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
+		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
 			return -EFAULT;
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
 	}
 
 	return ret;
@@ -144,8 +118,7 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int
-do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
+SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
 {
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
@@ -154,41 +127,6 @@ do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	/* Indicate EINTR on return from any possible signal handler,
-	   which will not come back through here, but via sigreturn.  */
-	regs->r0 = EINTR;
-	regs->r19 = 1;
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
-do_rt_sigsuspend(sigset_t __user *uset, size_t sigsetsize,
-		 struct pt_regs *regs, struct switch_stack *sw)
-{
-	sigset_t set;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-	if (copy_from_user(&set, uset, sizeof(set)))
-		return -EFAULT;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	/* Indicate EINTR on return from any possible signal handler,
-	   which will not come back through here, but via sigreturn.  */
-	regs->r0 = EINTR;
-	regs->r19 = 1;
-
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
 	set_thread_flag(TIF_RESTORE_SIGMASK);
@@ -239,6 +177,8 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	unsigned long usp;
 	long i, err = __get_user(regs->pc, &sc->sc_pc);
 
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	sw->r26 = (unsigned long) ret_from_sys_call;
 
 	err |= __get_user(regs->r0, sc->sc_regs+0);
@@ -591,7 +531,6 @@ syscall_restart(unsigned long r0, unsigned long r19,
 		regs->pc -= 4;
 		break;
 	case ERESTART_RESTARTBLOCK:
-		current_thread_info()->restart_block.fn = do_no_restart_syscall;
 		regs->r0 = EINTR;
 		break;
 	}

arch/alpha/kernel/srm_env.c

@@ -87,7 +87,7 @@ static int srm_env_proc_show(struct seq_file *m, void *v)
 	srm_env_t	*entry;
 	char		*page;
 
-	entry = (srm_env_t *)m->private;
+	entry = m->private;
 	page = (char *)__get_free_page(GFP_USER);
 	if (!page)
 		return -ENOMEM;

arch/alpha/kernel/systbls.S

@@ -58,7 +58,7 @@ sys_call_table:
 	.quad sys_open				/* 45 */
 	.quad alpha_ni_syscall
 	.quad sys_getxgid
-	.quad osf_sigprocmask
+	.quad sys_osf_sigprocmask
 	.quad alpha_ni_syscall
 	.quad alpha_ni_syscall			/* 50 */
 	.quad sys_acct
@@ -512,6 +512,9 @@ sys_call_table:
 	.quad sys_pwritev
 	.quad sys_rt_tgsigqueueinfo
 	.quad sys_perf_event_open
+	.quad sys_fanotify_init
+	.quad sys_fanotify_mark				/* 495 */
+	.quad sys_prlimit64
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

arch/alpha/kernel/time.c

@@ -191,16 +191,16 @@ irqreturn_t timer_interrupt(int irq, void *dev)
 
 	write_sequnlock(&xtime_lock);
 
-#ifndef CONFIG_SMP
-	while (nticks--)
-		update_process_times(user_mode(get_irq_regs()));
-#endif
-
 	if (test_perf_event_pending()) {
 		clear_perf_event_pending();
 		perf_event_do_pending();
 	}
 
+#ifndef CONFIG_SMP
+	while (nticks--)
+		update_process_times(user_mode(get_irq_regs()));
+#endif
+
 	return IRQ_HANDLED;
 }
 

arch/alpha/kernel/traps.c

@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kallsyms.h>
@@ -623,7 +622,6 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 		return;
 	}
 
-	lock_kernel();
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
 	do_exit(SIGSEGV);
@@ -646,7 +644,6 @@ got_exception:
 	 * Yikes!  No one to forward the exception to.
 	 * Since the registers are in a weird format, dump them ourselves.
  	 */
-	lock_kernel();
 
 	printk("%s(%d): unhandled unaligned exception\n",
 	       current->comm, task_pid_nr(current));

arch/arm/Kconfig

@@ -271,7 +271,6 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
-	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -1051,6 +1050,32 @@ config ARM_ERRATA_460075
 	  ACTLR register. Note that setting specific bits in the ACTLR register
 	  may not be available in non-secure mode.
 
+config ARM_ERRATA_742230
+	bool "ARM errata: DMB operation may be faulty"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 742230 Cortex-A9
+	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+	  between two write operations may not ensure the correct visibility
+	  ordering of the two writes. This workaround sets a specific bit in
+	  the diagnostic register of the Cortex-A9 which causes the DMB
+	  instruction to behave as a DSB, ensuring the correct behaviour of
+	  the two writes.
+
+config ARM_ERRATA_742231
+	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 742231 Cortex-A9
+	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
+	  Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+	  accessing some data located in the same cache line, may get corrupted
+	  data due to bad handling of the address hazard when the line gets
+	  replaced from one of the CPUs at the same time as another CPU is
+	  accessing it. This workaround sets specific bits in the diagnostic
+	  register of the Cortex-A9 which reduces the linefill issuing
+	  capabilities of the processor.
+
 config PL310_ERRATA_588369
 	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
 	depends on CACHE_L2X0 && ARCH_OMAP4

arch/arm/boot/compressed/Makefile

@@ -116,5 +116,5 @@ CFLAGS_font.o := -Dstatic=
 $(obj)/font.c: $(FONTC)
 	$(call cmd,shipped)
 
-$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
 	@sed "$(SEDFLAGS)" < $< > $@

arch/arm/common/it8152.c

@@ -271,6 +271,14 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= PHYS_OFFSET + SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;

arch/arm/include/asm/pgtable.h

@@ -317,6 +317,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
 #else
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)

arch/arm/kernel/entry-common.S

@@ -48,6 +48,8 @@ work_pending:
 	beq	no_work_pending
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
+	tst	r1, #_TIF_SIGPENDING		@ delivering a signal?
+	movne	why, #0				@ prevent further restarts
 	bl	do_notify_resume
 	b	ret_slow_syscall		@ Check work again
 
@@ -418,11 +420,13 @@ ENDPROC(sys_clone_wrapper)
 
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
+		mov	why, #0		@ prevent syscall restart handling
 		b	sys_sigreturn
 ENDPROC(sys_sigreturn_wrapper)
 
 sys_rt_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
+		mov	why, #0		@ prevent syscall restart handling
 		b	sys_rt_sigreturn
 ENDPROC(sys_rt_sigreturn_wrapper)
 

arch/arm/mach-at91/at91sam9g45.c

@@ -121,8 +121,8 @@ static struct clk ssc1_clk = {
 	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk tcb_clk = {
-	.name		= "tcb_clk",
+static struct clk tcb0_clk = {
+	.name		= "tcb0_clk",
 	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -192,6 +192,14 @@ static struct clk ohci_clk = {
 	.parent		= &uhphs_clk,
 };
 
+/* One additional fake clock for second TC block */
+static struct clk tcb1_clk = {
+	.name		= "tcb1_clk",
+	.pmc_mask	= 0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.parent		= &tcb0_clk,
+};
+
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -208,7 +216,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi1_clk,
 	&ssc0_clk,
 	&ssc1_clk,
-	&tcb_clk,
+	&tcb0_clk,
 	&pwm_clk,
 	&tsc_clk,
 	&dma_clk,
@@ -221,6 +229,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&mmc1_clk,
 	// irq0
 	&ohci_clk,
+	&tcb1_clk,
 };
 
 /*

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -46,7 +46,7 @@ static struct resource hdmac_resources[] = {
 		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
-	[2] = {
+	[1] = {
 		.start	= AT91SAM9G45_ID_DMA,
 		.end	= AT91SAM9G45_ID_DMA,
 		.flags	= IORESOURCE_IRQ,
@@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = {
 	.sda_is_open_drain	= 1,
 	.scl_pin		= AT91_PIN_PA21,
 	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
+	.udelay			= 5,		/* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi0_device = {
@@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
 	.sda_is_open_drain	= 1,
 	.scl_pin		= AT91_PIN_PB11,
 	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
+	.udelay			= 5,		/* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi1_device = {
@@ -835,9 +835,9 @@ static struct platform_device at91sam9g45_tcb1_device = {
 static void __init at91_add_device_tc(void)
 {
 	/* this chip has one clock and irq for all six TC channels */
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+	at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb0_device);
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+	at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb1_device);
 }
 #else

arch/arm/mach-at91/board-sam9261ek.c

@@ -93,11 +93,12 @@ static struct resource dm9000_resource[] = {
 		.start	= AT91_PIN_PC11,
 		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
 static struct dm9000_plat_data dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device dm9000_device = {
@@ -167,17 +168,6 @@ static struct at91_udc_data __initdata ek_udc_data = {
 };
 
 
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-//	.det_pin	= ... not connected
-//	.wp_pin		= ... not connected
-//	.vcc_pin	= ... not connected
-};
-
-
 /*
  * NAND flash
  */
@@ -246,6 +236,10 @@ static void __init ek_add_device_nand(void)
 	at91_add_device_nand(&ek_nand_data);
 }
 
+/*
+ * SPI related devices
+ */
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 
 /*
  * ADS7846 Touchscreen
@@ -356,6 +350,19 @@ static struct spi_board_info ek_spi_devices[] = {
 #endif
 };
 
+#else /* CONFIG_SPI_ATMEL_* */
+/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+};
+
+#endif /* CONFIG_SPI_ATMEL_* */
+
 
 /*
  * LCD Controller

arch/arm/mach-at91/clock.c

@@ -501,7 +501,8 @@ postcore_initcall(at91_clk_debugfs_init);
 int __init clk_register(struct clk *clk)
 {
 	if (clk_is_peripheral(clk)) {
-		clk->parent = &mck;
+		if (!clk->parent)
+			clk->parent = &mck;
 		clk->mode = pmc_periph_mode;
 		list_add_tail(&clk->node, &clocks);
 	}

arch/arm/mach-davinci/dm355.c

@@ -769,8 +769,7 @@ static struct map_desc dm355_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 

arch/arm/mach-davinci/dm365.c

@@ -969,8 +969,7 @@ static struct map_desc dm365_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 

arch/arm/mach-davinci/dm644x.c

@@ -653,8 +653,7 @@ static struct map_desc dm644x_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00008000),
 		.length		= SZ_16K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 

arch/arm/mach-davinci/dm646x.c

@@ -737,8 +737,7 @@ static struct map_desc dm646x_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 

arch/arm/mach-dove/include/mach/io.h

@@ -13,8 +13,8 @@
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
-				   DOVE_PCIE0_IO_VIRT_BASE))
-#define __mem_pci(a)		(a)
+#define __io(a)  	((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
+						 DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)	(a)
 
 #endif

arch/arm/mach-ixp4xx/common-pci.c

@@ -503,6 +503,14 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 

arch/arm/mach-ixp4xx/include/mach/hardware.h

@@ -26,6 +26,8 @@
 #define PCIBIOS_MAX_MEM		0x4BFFFFFF
 #endif
 
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
+
 #define pcibios_assign_all_busses()	1
 
 /* Register locations and bits */

arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -38,7 +38,7 @@
 
 #define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
 #define KIRKWOOD_PCIE1_IO_VIRT_BASE	0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00100000
 #define KIRKWOOD_PCIE1_IO_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000

arch/arm/mach-kirkwood/pcie.c

@@ -117,7 +117,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
 	 * IORESOURCE_IO
 	 */
 	pp->res[0].name = "PCIe 0 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+	pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
 	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
 	pp->res[0].flags = IORESOURCE_IO;
 
@@ -139,7 +139,7 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp)
 	 * IORESOURCE_IO
 	 */
 	pp->res[0].name = "PCIe 1 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
+	pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
 	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
 	pp->res[0].flags = IORESOURCE_IO;
 

arch/arm/mach-mmp/include/mach/system.h

@@ -9,6 +9,8 @@
 #ifndef __ASM_MACH_SYSTEM_H
 #define __ASM_MACH_SYSTEM_H
 
+#include <mach/cputype.h>
+
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
@@ -16,6 +18,9 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	cpu_reset(0);
+	if (cpu_is_pxa168())
+		cpu_reset(0xffff0000);
+	else
+		cpu_reset(0);
 }
 #endif /* __ASM_MACH_SYSTEM_H */

arch/arm/mach-pxa/cpufreq-pxa2xx.c

@@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	freqs.cpu = policy->cpu;
 
 	if (freq_debug)
-		pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
-			 "(SDRAM %d Mhz)\n",
+		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
 			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
 			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 

arch/arm/mach-pxa/include/mach/hardware.h

@@ -264,23 +264,35 @@
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
  * == 0x3 for pxa300/pxa310/pxa320
  */
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
 #define __cpu_is_pxa2xx(id)				\
 	({						\
 		unsigned int _id = (id) >> 13 & 0x7;	\
 		_id <= 0x2;				\
 	 })
+#else
+#define __cpu_is_pxa2xx(id)	(0)
+#endif
 
+#ifdef CONFIG_PXA3xx
 #define __cpu_is_pxa3xx(id)				\
 	({						\
 		unsigned int _id = (id) >> 13 & 0x7;	\
 		_id == 0x3;				\
 	 })
+#else
+#define __cpu_is_pxa3xx(id)	(0)
+#endif
 
+#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
 #define __cpu_is_pxa93x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x683 || _id == 0x693;		\
 	 })
+#else
+#define __cpu_is_pxa93x(id)	(0)
+#endif
 
 #define cpu_is_pxa2xx()					\
 	({						\
@@ -309,7 +321,7 @@ extern unsigned long get_clock_tick_rate(void);
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
 #endif
 
-
 #endif  /* _ASM_ARCH_HARDWARE_H */

arch/arm/mach-pxa/include/mach/io.h

@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <mach/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*

arch/arm/mach-pxa/palm27x.c

@@ -469,9 +469,13 @@ static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
 	},
 };
 
+static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
+	.use_pio	= 1,
+};
+
 void __init palm27x_pmic_init(void)
 {
 	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
-	pxa27x_set_i2c_power_info(NULL);
+	pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
 }
 #endif

arch/arm/mach-pxa/vpac270.c

@@ -240,6 +240,7 @@ static void __init vpac270_onenand_init(void) {}
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data vpac270_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
 	.gpio_card_detect	= GPIO53_VPAC270_SD_DETECT_N,
 	.gpio_card_ro		= GPIO52_VPAC270_SD_READONLY,
 	.detect_delay_ms	= 200,

arch/arm/mach-s3c64xx/dev-spi.c

@@ -18,10 +18,11 @@
 #include <mach/map.h>
 #include <mach/gpio-bank-c.h>
 #include <mach/spi-clocks.h>
+#include <mach/irqs.h>
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
-#include <plat/irqs.h>
+#include <plat/devs.h>
 
 static char *spi_src_clks[] = {
 	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -30,73 +30,73 @@
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
 
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
 static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
 	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 };
 
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource real6410_dm9k_resource[] = {
-        [0] = {
-                .start = S3C64XX_PA_XM0CSN1,
-                .end   = S3C64XX_PA_XM0CSN1 + 1,
-                .flags = IORESOURCE_MEM
-        },
-        [1] = {
-                .start = S3C64XX_PA_XM0CSN1 + 4,
-                .end   = S3C64XX_PA_XM0CSN1 + 5,
-                .flags = IORESOURCE_MEM
-        },
-        [2] = {
-                .start = S3C_EINT(7),
-                .end   = S3C_EINT(7),
-                .flags = IORESOURCE_IRQ,
-        }
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN1,
+		.end	= S3C64XX_PA_XM0CSN1 + 1,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN1 + 4,
+		.end	= S3C64XX_PA_XM0CSN1 + 5,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= S3C_EINT(7),
+		.end	= S3C_EINT(7),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
+	}
 };
 
 static struct dm9000_plat_data real6410_dm9k_pdata = {
-        .flags          = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
 };
 
 static struct platform_device real6410_device_eth = {
-        .name           = "dm9000",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(real6410_dm9k_resource),
-        .resource       = real6410_dm9k_resource,
-        .dev            = {
-                .platform_data  = &real6410_dm9k_pdata,
-        },
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
+	.resource	= real6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &real6410_dm9k_pdata,
+	},
 };
 
 static struct platform_device *real6410_devices[] __initdata = {
@@ -129,12 +129,12 @@ static void __init real6410_machine_init(void)
 	/* set timing for nCS1 suitable for ethernet chip */
 
 	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-			(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-			(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-			(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-			(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-			(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-			(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
 
 	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
 }

arch/arm/mach-s5pv210/clock.c

@@ -280,6 +280,24 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_hclk_dsys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1<<29),
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 24),
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 26),
 	}, {
 		.name		= "otg",
 		.id		= -1,
@@ -357,7 +375,7 @@ static struct clk init_clocks_disable[] = {
 		.id		= 1,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<8),
+		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "i2c",
 		.id		= 2,

arch/arm/mach-s5pv210/cpu.c

@@ -47,7 +47,7 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
 		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
-		.length		= SZ_1M,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)VA_VIC2,

arch/arm/mach-u300/include/mach/gpio.h

@@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value);
 extern int gpio_get_value(unsigned gpio);
 extern void gpio_set_value(unsigned gpio, int value);
 
+#define gpio_get_value_cansleep gpio_get_value
+#define gpio_set_value_cansleep gpio_set_value
+
 /* wrappers to sleep-enable the previous two functions */
 static inline unsigned gpio_to_irq(unsigned gpio)
 {

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -227,7 +227,13 @@ static void ct_ca9x4_init(void)
 	int i;
 
 #ifdef CONFIG_CACHE_L2X0
-	l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+	void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
+
+	/* set RAM latencies to 1 cycle for this core tile. */
+	writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+	writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+	l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));

arch/arm/mm/alignment.c

@@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (ai_usermode & UM_SIGNAL)
 		force_sig(SIGBUS, current);
-	else
-		set_cr(cr_no_alignment);
+	else {
+		/*
+		 * We're about to disable the alignment trap and return to
+		 * user space.  But if an interrupt occurs before actually
+		 * reaching user space, then the IRQ vector entry code will
+		 * notice that we were still in kernel space and therefore
+		 * the alignment trap won't be re-enabled in that case as it
+		 * is presumed to be always on from kernel space.
+		 * Let's prevent that race by disabling interrupts here (they
+		 * are disabled on the way back to user space anyway in
+		 * entry-common.S) and disable the alignment trap only if
+		 * there is no work pending for this thread.
+		 */
+		raw_local_irq_disable();
+		if (!(current_thread_info()->flags & _TIF_WORK_MASK))
+			set_cr(cr_no_alignment);
+	}
 
 	return 0;
 }

arch/arm/mm/mmu.c

@@ -15,6 +15,7 @@
 #include <linux/nodemask.h>
 #include <linux/memblock.h>
 #include <linux/sort.h>
+#include <linux/fs.h>
 
 #include <asm/cputype.h>
 #include <asm/sections.h>
@@ -246,6 +247,9 @@ static struct mem_type mem_types[] = {
 		.domain    = DOMAIN_USER,
 	},
 	[MT_MEMORY] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_USER | L_PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
@@ -254,6 +258,9 @@ static struct mem_type mem_types[] = {
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_MEMORY_NONCACHED] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
@@ -411,9 +418,12 @@ static void __init build_mem_type_table(void)
 	 * Enable CPU-specific coherency if supported.
 	 * (Only available on XSC3 at the moment.)
 	 */
-	if (arch_is_coherent() && cpu_is_xsc3())
+	if (arch_is_coherent() && cpu_is_xsc3()) {
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-
+		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
+	}
 	/*
 	 * ARMv6 and above have extended page tables.
 	 */
@@ -438,7 +448,9 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
 		mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
 		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 #endif
 	}
 
@@ -475,6 +487,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
 
 	switch (cp->pmd) {
@@ -498,6 +512,19 @@ static void __init build_mem_type_table(void)
 	}
 }
 
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+			      unsigned long size, pgprot_t vma_prot)
+{
+	if (!pfn_valid(pfn))
+		return pgprot_noncached(vma_prot);
+	else if (file->f_flags & O_SYNC)
+		return pgprot_writecombine(vma_prot);
+	return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+#endif
+
 #define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
 
 static void __init *early_alloc(unsigned long sz)

arch/arm/mm/proc-v7.S

@@ -186,13 +186,14 @@ cpu_v7_name:
  *	It is assumed that:
  *	- cache type register is implemented
  */
-__v7_setup:
+__v7_ca9mp_setup:
 #ifdef CONFIG_SMP
 	mrc	p15, 0, r0, c1, c0, 1
 	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
 	orreq	r0, r0, #(1 << 6) | (1 << 0)	@ Enable SMP/nAMP mode and
 	mcreq	p15, 0, r0, c1, c0, 1		@ TLB ops broadcasting
 #endif
+__v7_setup:
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
@@ -201,11 +202,16 @@ __v7_setup:
 	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
 	and	r10, r0, #0xff000000		@ ARM?
 	teq	r10, #0x41000000
-	bne	2f
+	bne	3f
 	and	r5, r0, #0x00f00000		@ variant
 	and	r6, r0, #0x0000000f		@ revision
-	orr	r0, r6, r5, lsr #20-4		@ combine variant and revision
+	orr	r6, r6, r5, lsr #20-4		@ combine variant and revision
+	ubfx	r0, r0, #4, #12			@ primary part number
 
+	/* Cortex-A8 Errata */
+	ldr	r10, =0x00000c08		@ Cortex-A8 primary part number
+	teq	r0, r10
+	bne	2f
 #ifdef CONFIG_ARM_ERRATA_430973
 	teq	r5, #0x00100000			@ only present in r1p*
 	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
@@ -213,21 +219,42 @@ __v7_setup:
 	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-	teq	r0, #0x20			@ only present in r2p0
+	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
 	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
 	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
 	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-	teq	r0, #0x20			@ only present in r2p0
+	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
 	tsteq	r10, #1 << 22
 	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
 	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
+	b	3f
+
+	/* Cortex-A9 Errata */
+2:	ldr	r10, =0x00000c09		@ Cortex-A9 primary part number
+	teq	r0, r10
+	bne	3f
+#ifdef CONFIG_ARM_ERRATA_742230
+	cmp	r6, #0x22			@ only present up to r2p2
+	mrcle	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orrle	r10, r10, #1 << 4		@ set bit #4
+	mcrle	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_742231
+	teq	r6, #0x20			@ present in r2p0
+	teqne	r6, #0x21			@ present in r2p1
+	teqne	r6, #0x22			@ present in r2p2
+	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orreq	r10, r10, #1 << 12		@ set bit #12
+	orreq	r10, r10, #1 << 22		@ set bit #22
+	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
 
-2:	mov	r10, #0
+3:	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif
@@ -323,6 +350,29 @@ cpu_elf_name:
 
 	.section ".proc.info.init", #alloc, #execinstr
 
+	.type   __v7_ca9mp_proc_info, #object
+__v7_ca9mp_proc_info:
+	.long	0x410fc090		@ Required ID value
+	.long	0xff0ffff0		@ Mask for ID
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_XN | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__v7_ca9mp_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_v7_name
+	.long	v7_processor_functions
+	.long	v7wbi_tlb_fns
+	.long	v6_user_fns
+	.long	v7_cache_fns
+	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+
 	/*
 	 * Match any ARMv7 processor core.
 	 */

arch/arm/oprofile/common.c

@@ -102,6 +102,7 @@ static int op_create_counter(int cpu, int event)
 	if (IS_ERR(pevent)) {
 		ret = PTR_ERR(pevent);
 	} else if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
+		perf_event_release_kernel(pevent);
 		pr_warning("oprofile: failed to enable event %d "
 				"on CPU %d\n", event, cpu);
 		ret = -EBUSY;
@@ -365,6 +366,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	ret = init_driverfs();
 	if (ret) {
 		kfree(counter_config);
+		counter_config = NULL;
 		return ret;
 	}
 
@@ -402,7 +404,6 @@ void oprofile_arch_exit(void)
 	struct perf_event *event;
 
 	if (*perf_events) {
-		exit_driverfs();
 		for_each_possible_cpu(cpu) {
 			for (id = 0; id < perf_num_counters; ++id) {
 				event = perf_events[cpu][id];
@@ -413,8 +414,10 @@ void oprofile_arch_exit(void)
 		}
 	}
 
-	if (counter_config)
+	if (counter_config) {
 		kfree(counter_config);
+		exit_driverfs();
+	}
 }
 #else
 int __init oprofile_arch_init(struct oprofile_operations *ops)

arch/arm/plat-nomadik/timer.c

@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-nomadik/timer.c
+ *  linux/arch/arm/plat-nomadik/timer.c
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
@@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
 		cr = readl(mtu_base + MTU_CR(1));
 		writel(0, mtu_base + MTU_LR(1));
 		writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
-		writel(0x2, mtu_base + MTU_IMSC);
+		writel(1 << 1, mtu_base + MTU_IMSC);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
@@ -131,25 +131,23 @@ void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
 	struct clk *clk0;
-	struct clk *clk1;
-	u32 cr;
+	u32 cr = MTU_CRn_32BITS;
 
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
 
-	clk1 = clk_get_sys("mtu1", NULL);
-	BUG_ON(IS_ERR(clk1));
-
 	clk_enable(clk0);
-	clk_enable(clk1);
 
 	/*
-	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
-	 * use a divide-by-16 counter if it's more than 16MHz
+	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
+	 * for ux500.
+	 * Use a divide-by-16 counter if the tick rate is more than 32MHz.
+	 * At 32 MHz, the timer (with 32 bit counter) can be programmed
+	 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
+	 * with 16 gives too low timer resolution.
 	 */
-	cr = MTU_CRn_32BITS;;
 	rate = clk_get_rate(clk0);
-	if (rate > 16 << 20) {
+	if (rate > 32000000) {
 		rate /= 16;
 		cr |= MTU_CRn_PRESCALE_16;
 	} else {
@@ -170,15 +168,8 @@ void __init nmdk_timer_init(void)
 		pr_err("timer: failed to initialize clock source %s\n",
 		       nmdk_clksrc.name);
 
-	/* Timer 1 is used for events, fix according to rate */
-	cr = MTU_CRn_32BITS;
-	rate = clk_get_rate(clk1);
-	if (rate > 16 << 20) {
-		rate /= 16;
-		cr |= MTU_CRn_PRESCALE_16;
-	} else {
-		cr |= MTU_CRn_PRESCALE_1;
-	}
+	/* Timer 1 is used for events */
+
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
 
 	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */

arch/arm/plat-omap/Kconfig

@@ -33,7 +33,7 @@ config OMAP_DEBUG_DEVICES
 config OMAP_DEBUG_LEDS
 	bool
 	depends on OMAP_DEBUG_DEVICES
-	default y if LEDS
+	default y if LEDS_CLASS
 
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"

arch/arm/plat-omap/mcbsp.c

@@ -156,7 +156,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 		/* Writing zero to RSYNC_ERR clears the IRQ */
 		MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
 	} else {
-		complete(&mcbsp_rx->tx_irq_completion);
+		complete(&mcbsp_rx->rx_irq_completion);
 	}
 
 	return IRQ_HANDLED;

arch/arm/plat-omap/sram.c

@@ -220,20 +220,7 @@ void __init omap_map_sram(void)
 	if (omap_sram_size == 0)
 		return;
 
-	if (cpu_is_omap24xx()) {
-		omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
-
-		base = OMAP2_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-	}
-
 	if (cpu_is_omap34xx()) {
-		omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
-		base = OMAP3_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-
 		/*
 		 * SRAM must be marked as non-cached on OMAP3 since the
 		 * CORE DPLL M2 divider change code (in SRAM) runs with the
@@ -244,13 +231,11 @@ void __init omap_map_sram(void)
 		omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
 	}
 
-	if (cpu_is_omap44xx()) {
-		omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
-		base = OMAP4_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-	}
-	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
+	omap_sram_io_desc[0].virtual = omap_sram_base;
+	base = omap_sram_start;
+	base = ROUND_DOWN(base, PAGE_SIZE);
+	omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
 	printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",

arch/arm/plat-s5p/dev-fimc0.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -18,7 +19,7 @@
 static struct resource s5p_fimc0_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC0,
-		.end	= S5P_PA_FIMC0 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC0 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -28,9 +29,15 @@ static struct resource s5p_fimc0_resource[] = {
 	},
 };
 
+static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc0 = {
 	.name		= "s5p-fimc",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
 	.resource	= s5p_fimc0_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc0_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };

arch/arm/plat-s5p/dev-fimc1.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -18,7 +19,7 @@
 static struct resource s5p_fimc1_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC1,
-		.end	= S5P_PA_FIMC1 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC1 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -28,9 +29,15 @@ static struct resource s5p_fimc1_resource[] = {
 	},
 };
 
+static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc1 = {
 	.name		= "s5p-fimc",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
 	.resource	= s5p_fimc1_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc1_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };

arch/arm/plat-s5p/dev-fimc2.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -18,7 +19,7 @@
 static struct resource s5p_fimc2_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC2,
-		.end	= S5P_PA_FIMC2 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC2 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -28,9 +29,15 @@ static struct resource s5p_fimc2_resource[] = {
 	},
 };
 
+static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc2 = {
 	.name		= "s5p-fimc",
 	.id		= 2,
 	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
 	.resource	= s5p_fimc2_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc2_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };

arch/arm/plat-samsung/gpio-config.c

@@ -273,13 +273,13 @@ s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	drvstr = __raw_readl(reg);
-	drvstr = 0xffff & (0x3 << shift);
 	drvstr = drvstr >> shift;
+	drvstr &= 0x3;
 
 	return (__force s5p_gpio_drvstr_t)drvstr;
 }
@@ -296,11 +296,12 @@ int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	tmp = __raw_readl(reg);
+	tmp &= ~(0x3 << shift);
 	tmp |= drvstr << shift;
 
 	__raw_writel(tmp, reg);

arch/arm/plat-samsung/include/plat/gpio-cfg.h

@@ -143,12 +143,12 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 /* Define values for the drvstr available for each gpio pin.
  *
  * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5C series.
+ * configurable on most pins on the S5P series.
  */
-#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x00)
-#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x01)
-#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x10)
-#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x11)
+#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
+#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
+#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
+#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
 
 /**
  * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin

arch/avr32/kernel/module.c

@@ -314,10 +314,9 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
 	vfree(module->arch.syminfo);
 	module->arch.syminfo = NULL;
 
-	return module_bug_finalize(hdr, sechdrs, module);
+	return 0;
 }
 
 void module_arch_cleanup(struct module *module)
 {
-	module_bug_cleanup(module);
 }

arch/frv/kernel/signal.c

@@ -121,6 +121,9 @@ static int restore_sigcontext(struct sigcontext __user *sc, int *_gr8)
 	struct user_context *user = current->thread.user;
 	unsigned long tbr, psr;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	tbr = user->i.tbr;
 	psr = user->i.psr;
 	if (copy_from_user(user, &sc->sc_context, sizeof(sc->sc_context)))
@@ -250,6 +253,8 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
 	struct sigframe __user *frame;
 	int rsig;
 
+	set_fs(USER_DS);
+
 	frame = get_sigframe(ka, sizeof(*frame));
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
@@ -293,22 +298,23 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
 				   (unsigned long) (frame->retcode + 2));
 	}
 
-	/* set up registers for signal handler */
-	__frame->sp   = (unsigned long) frame;
-	__frame->lr   = (unsigned long) &frame->retcode;
-	__frame->gr8  = sig;
-
+	/* Set up registers for the signal handler */
 	if (current->personality & FDPIC_FUNCPTRS) {
 		struct fdpic_func_descriptor __user *funcptr =
 			(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
-		__get_user(__frame->pc, &funcptr->text);
-		__get_user(__frame->gr15, &funcptr->GOT);
+		struct fdpic_func_descriptor desc;
+		if (copy_from_user(&desc, funcptr, sizeof(desc)))
+			goto give_sigsegv;
+		__frame->pc = desc.text;
+		__frame->gr15 = desc.GOT;
 	} else {
 		__frame->pc   = (unsigned long) ka->sa.sa_handler;
 		__frame->gr15 = 0;
 	}
 
-	set_fs(USER_DS);
+	__frame->sp   = (unsigned long) frame;
+	__frame->lr   = (unsigned long) &frame->retcode;
+	__frame->gr8  = sig;
 
 	/* the tracer may want to single-step inside the handler */
 	if (test_thread_flag(TIF_SINGLESTEP))
@@ -323,7 +329,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
 	return 0;
 
 give_sigsegv:
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 	return -EFAULT;
 
 } /* end setup_frame() */
@@ -338,6 +344,8 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	int rsig;
 
+	set_fs(USER_DS);
+
 	frame = get_sigframe(ka, sizeof(*frame));
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
@@ -392,22 +400,23 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	}
 
 	/* Set up registers for signal handler */
-	__frame->sp  = (unsigned long) frame;
-	__frame->lr   = (unsigned long) &frame->retcode;
-	__frame->gr8 = sig;
-	__frame->gr9 = (unsigned long) &frame->info;
-
 	if (current->personality & FDPIC_FUNCPTRS) {
 		struct fdpic_func_descriptor __user *funcptr =
 			(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
-		__get_user(__frame->pc, &funcptr->text);
-		__get_user(__frame->gr15, &funcptr->GOT);
+		struct fdpic_func_descriptor desc;
+		if (copy_from_user(&desc, funcptr, sizeof(desc)))
+			goto give_sigsegv;
+		__frame->pc = desc.text;
+		__frame->gr15 = desc.GOT;
 	} else {
 		__frame->pc   = (unsigned long) ka->sa.sa_handler;
 		__frame->gr15 = 0;
 	}
 
-	set_fs(USER_DS);
+	__frame->sp  = (unsigned long) frame;
+	__frame->lr  = (unsigned long) &frame->retcode;
+	__frame->gr8 = sig;
+	__frame->gr9 = (unsigned long) &frame->info;
 
 	/* the tracer may want to single-step inside the handler */
 	if (test_thread_flag(TIF_SINGLESTEP))
@@ -422,7 +431,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return 0;
 
 give_sigsegv:
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 	return -EFAULT;
 
 } /* end setup_rt_frame() */
@@ -437,7 +446,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	int ret;
 
 	/* Are we from a system call? */
-	if (in_syscall(__frame)) {
+	if (__frame->syscallno != -1) {
 		/* If so, check system call restarting.. */
 		switch (__frame->gr8) {
 		case -ERESTART_RESTARTBLOCK:
@@ -456,6 +465,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 			__frame->gr8 = __frame->orig_gr8;
 			__frame->pc -= 4;
 		}
+		__frame->syscallno = -1;
 	}
 
 	/* Set up the stack frame */
@@ -538,10 +548,11 @@ no_signal:
 			break;
 
 		case -ERESTART_RESTARTBLOCK:
-			__frame->gr8 = __NR_restart_syscall;
+			__frame->gr7 = __NR_restart_syscall;
 			__frame->pc -= 4;
 			break;
 		}
+		__frame->syscallno = -1;
 	}
 
 	/* if there's no signal to deliver, we just put the saved sigmask

arch/h8300/kernel/module.c

@@ -112,10 +112,9 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return module_bug_finalize(hdr, sechdrs, me);
+	return 0;
 }
 
 void module_arch_cleanup(struct module *mod)
 {
-	module_bug_cleanup(mod);
 }

arch/ia64/include/asm/compat.h

@@ -199,7 +199,7 @@ ptr_to_compat(void __user *uptr)
 }
 
 static __inline__ void __user *
-compat_alloc_user_space (long len)
+arch_compat_alloc_user_space (long len)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);

arch/ia64/kernel/fsys.S

@@ -420,22 +420,31 @@ EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
 	;;
 
 	RSM_PSR_I(p0, r18, r19)			// mask interrupt delivery
-	mov ar.ccv=0
 	andcm r14=r14,r17			// filter out SIGKILL & SIGSTOP
+	mov r8=EINVAL			// default to EINVAL
 
 #ifdef CONFIG_SMP
-	mov r17=1
+	// __ticket_spin_trylock(r31)
+	ld4 r17=[r31]
 	;;
-	cmpxchg4.acq r18=[r31],r17,ar.ccv	// try to acquire the lock
-	mov r8=EINVAL			// default to EINVAL
+	mov.m ar.ccv=r17
+	extr.u r9=r17,17,15
+	adds r19=1,r17
+	extr.u r18=r17,0,15
+	;;
+	cmp.eq p6,p7=r9,r18
 	;;
+(p6)	cmpxchg4.acq r9=[r31],r19,ar.ccv
+(p6)	dep.z r20=r19,1,15		// next serving ticket for unlock
+(p7)	br.cond.spnt.many .lock_contention
+	;;
+	cmp4.eq p0,p7=r9,r17
+	adds r31=2,r31
+(p7)	br.cond.spnt.many .lock_contention
 	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
-	cmp4.ne p6,p0=r18,r0
-(p6)	br.cond.spnt.many .lock_contention
 	;;
 #else
 	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
-	mov r8=EINVAL			// default to EINVAL
 #endif
 	add r18=IA64_TASK_PENDING_OFFSET+IA64_SIGPENDING_SIGNAL_OFFSET,r16
 	add r19=IA64_TASK_SIGNAL_OFFSET,r16
@@ -490,7 +499,9 @@ EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
 (p6)	br.cond.spnt.few 1b			// yes -> retry
 
 #ifdef CONFIG_SMP
-	st4.rel [r31]=r0			// release the lock
+	// __ticket_spin_unlock(r31)
+	st2.rel [r31]=r20
+	mov r20=0					// i must not leak kernel bits...
 #endif
 	SSM_PSR_I(p0, p9, r31)
 	;;
@@ -512,7 +523,8 @@ EX(.fail_efault, (p15) st8 [r34]=r3)
 
 .sig_pending:
 #ifdef CONFIG_SMP
-	st4.rel [r31]=r0			// release the lock
+	// __ticket_spin_unlock(r31)
+	st2.rel [r31]=r20			// release the lock
 #endif
 	SSM_PSR_I(p0, p9, r17)
 	;;

arch/m32r/include/asm/signal.h

@@ -157,7 +157,6 @@ typedef struct sigaltstack {
 #undef __HAVE_ARCH_SIG_BITOPS
 
 struct pt_regs;
-extern int do_signal(struct pt_regs *regs, sigset_t *oldset);
 
 #define ptrace_signal_deliver(regs, cookie)	do { } while (0)
 

arch/m32r/include/asm/unistd.h

@@ -351,6 +351,7 @@
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT /*will be unused*/
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 #define __IGNORE_lchown
 #define __IGNORE_setuid

arch/m32r/kernel/entry.S

@@ -235,10 +235,9 @@ work_resched:
 work_notifysig:				; deal with pending signals and
 					; notify-resume requests
 	mv	r0, sp			; arg1 : struct pt_regs *regs
-	ldi	r1, #0			; arg2 : sigset_t *oldset
-	mv	r2, r9			; arg3 : __u32 thread_info_flags
+	mv	r1, r9			; arg2 : __u32 thread_info_flags
 	bl	do_notify_resume
-	bra	restore_all
+	bra	resume_userspace
 
 	; perform syscall exit tracing
 	ALIGN

arch/m32r/kernel/ptrace.c

@@ -592,16 +592,17 @@ void user_enable_single_step(struct task_struct *child)
 
 	if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
 	    != sizeof(insn))
-		break;
+		return -EIO;
 
 	compute_next_pc(insn, pc, &next_pc, child);
 	if (next_pc & 0x80000000)
-		break;
+		return -EIO;
 
 	if (embed_debug_trap(child, next_pc))
-		break;
+		return -EIO;
 
 	invalidate_cache();
+	return 0;
 }
 
 void user_disable_single_step(struct task_struct *child)

arch/m32r/kernel/signal.c

@@ -28,37 +28,6 @@
 
 #define DEBUG_SIG 0
 
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-int do_signal(struct pt_regs *, sigset_t *);
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		  unsigned long r2, unsigned long r3, unsigned long r4,
-		  unsigned long r5, unsigned long r6, struct pt_regs *regs)
-{
-	sigset_t newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, sigmask(SIGKILL)|sigmask(SIGSTOP));
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
 asmlinkage int
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		unsigned long r2, unsigned long r3, unsigned long r4,
@@ -218,7 +187,7 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
 	return (void __user *)((sp - frame_size) & -8ul);
 }
 
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			   sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
@@ -275,22 +244,34 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		current->comm, current->pid, frame, regs->pc);
 #endif
 
-	return;
+	return 0;
 
 give_sigsegv:
 	force_sigsegv(sig, current);
+	return -EFAULT;
+}
+
+static int prev_insn(struct pt_regs *regs)
+{
+	u16 inst;
+	if (get_user(&inst, (u16 __user *)(regs->bpc - 2)))
+		return -EFAULT;
+	if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
+		regs->bpc -= 2;
+	else
+		regs->bpc -= 4;
+	regs->syscall_nr = -1;
+	return 0;
 }
 
 /*
  * OK, we're invoking a handler
  */
 
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	      sigset_t *oldset, struct pt_regs *regs)
 {
-	unsigned short inst;
-
 	/* Are we from a system call? */
 	if (regs->syscall_nr >= 0) {
 		/* If so, check system call restarting.. */
@@ -308,16 +289,14 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				regs->r0 = regs->orig_r0;
-				inst = *(unsigned short *)(regs->bpc - 2);
-				if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
-					regs->bpc -= 2;
-				else
-					regs->bpc -= 4;
+				if (prev_insn(regs) < 0)
+					return -EFAULT;
 		}
 	}
 
 	/* Set up the stack frame */
-	setup_rt_frame(sig, ka, info, oldset, regs);
+	if (setup_rt_frame(sig, ka, info, oldset, regs))
+		return -EFAULT;
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -325,6 +304,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 		sigaddset(&current->blocked,sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+	return 0;
 }
 
 /*
@@ -332,12 +312,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+static void do_signal(struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;
 	struct k_sigaction ka;
-	unsigned short inst;
+	sigset_t *oldset;
 
 	/*
 	 * We want the common case to go fast, which
@@ -346,12 +326,14 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 	 * if so.
 	 */
 	if (!user_mode(regs))
-		return 1;
+		return;
 
 	if (try_to_freeze()) 
 		goto no_signal;
 
-	if (!oldset)
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -363,8 +345,10 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 		 */
 
 		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &ka, &info, oldset, regs);
-		return 1;
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0)
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		return;
 	}
 
  no_signal:
@@ -375,31 +359,24 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 		    regs->r0 == -ERESTARTSYS ||
 		    regs->r0 == -ERESTARTNOINTR) {
 			regs->r0 = regs->orig_r0;
-			inst = *(unsigned short *)(regs->bpc - 2);
-			if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
-				regs->bpc -= 2;
-			else
-				regs->bpc -= 4;
-		}
-		if (regs->r0 == -ERESTART_RESTARTBLOCK){
+			prev_insn(regs);
+		} else if (regs->r0 == -ERESTART_RESTARTBLOCK){
 			regs->r0 = regs->orig_r0;
 			regs->r7 = __NR_restart_syscall;
-			inst = *(unsigned short *)(regs->bpc - 2);
-			if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
-				regs->bpc -= 2;
-			else
-				regs->bpc -= 4;
+			prev_insn(regs);
 		}
 	}
-	return 0;
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
 }
 
 /*
  * notification of userspace execution resumption
  * - triggered by current->work.notify_resume
  */
-void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
-		      __u32 thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, __u32 thread_info_flags)
 {
 	/* Pending single-step? */
 	if (thread_info_flags & _TIF_SINGLESTEP)
@@ -407,7 +384,7 @@ void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
 
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(regs,oldset);
+		do_signal(regs);
 
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);

arch/m68k/include/asm/unistd.h

@@ -340,10 +340,13 @@
 #define __NR_set_thread_area	334
 #define __NR_atomic_cmpxchg_32	335
 #define __NR_atomic_barrier	336
+#define __NR_fanotify_init	337
+#define __NR_fanotify_mark	338
+#define __NR_prlimit64		339
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		337
+#define NR_syscalls		340
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR

arch/m68k/kernel/entry.S

@@ -765,4 +765,7 @@ sys_call_table:
 	.long sys_set_thread_area
 	.long sys_atomic_cmpxchg_32	/* 335 */
 	.long sys_atomic_barrier
+	.long sys_fanotify_init
+	.long sys_fanotify_mark
+	.long sys_prlimit64
 

arch/m68k/mac/macboing.c

@@ -162,7 +162,7 @@ static void mac_init_asc( void )
 void mac_mksound( unsigned int freq, unsigned int length )
 {
 	__u32 cfreq = ( freq << 5 ) / 468;
-	__u32 flags;
+	unsigned long flags;
 	int i;
 
 	if ( mac_special_bell == NULL )
@@ -224,7 +224,7 @@ static void mac_nosound( unsigned long ignored )
  */
 static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsigned int volume )
 {
-	__u32 flags;
+	unsigned long flags;
 
 	/* if the bell is already ringing, ring longer */
 	if ( mac_bell_duration > 0 )
@@ -271,7 +271,7 @@ static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsig
 static void mac_quadra_ring_bell( unsigned long ignored )
 {
 	int	i, count = mac_asc_samplespersec / HZ;
-	__u32 flags;
+	unsigned long flags;
 
 	/*
 	 * we neither want a sound buffer overflow nor underflow, so we need to match

arch/m68knommu/kernel/syscalltable.S

@@ -355,6 +355,9 @@ ENTRY(sys_call_table)
 	.long sys_set_thread_area
 	.long sys_atomic_cmpxchg_32	/* 335 */
 	.long sys_atomic_barrier
+	.long sys_fanotify_init
+	.long sys_fanotify_mark
+	.long sys_prlimit64
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall

arch/mips/Kconfig

@@ -13,6 +13,7 @@ config MIPS
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select RTC_LIB if !MACH_LOONGSON
+	select GENERIC_ATOMIC64 if !64BIT
 
 mainmenu "Linux/MIPS Kernel Configuration"
 
@@ -1646,8 +1647,16 @@ config MIPS_MT_SMP
 	select SYS_SUPPORTS_SMP
 	select SMP_UP
 	help
-	  This is a kernel model which is also known a VSMP or lately
-	  has been marketesed into SMVP.
+	  This is a kernel model which is known a VSMP but lately has been
+	  marketesed into SMVP.
+	  Virtual SMP uses the processor's VPEs  to implement virtual
+	  processors. In currently available configuration of the 34K processor
+	  this allows for a dual processor. Both processors will share the same
+	  primary caches; each will obtain the half of the TLB for it's own
+	  exclusive use. For a layman this model can be described as similar to
+	  what Intel calls Hyperthreading.
+
+	  For further information see http://www.linux-mips.org/wiki/34K#VSMP
 
 config MIPS_MT_SMTC
 	bool "SMTC: Use all TCs on all VPEs for SMP"
@@ -1664,6 +1673,14 @@ config MIPS_MT_SMTC
 	help
 	  This is a kernel model which is known a SMTC or lately has been
 	  marketesed into SMVP.
+	  is presenting the available TC's of the core as processors to Linux.
+	  On currently available 34K processors this means a Linux system will
+	  see up to 5 processors. The implementation of the SMTC kernel differs
+	  significantly from VSMP and cannot efficiently coexist in the same
+	  kernel binary so the choice between VSMP and SMTC is a compile time
+	  decision.
+
+	  For further information see http://www.linux-mips.org/wiki/34K#SMTC
 
 endchoice
 

arch/mips/alchemy/common/prom.c

@@ -43,7 +43,7 @@ int prom_argc;
 char **prom_argv;
 char **prom_envp;
 
-void prom_init_cmdline(void)
+void __init prom_init_cmdline(void)
 {
 	int i;
 
@@ -104,7 +104,7 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
 	}
 }
 
-int prom_get_ethernet_addr(char *ethernet_addr)
+int __init prom_get_ethernet_addr(char *ethernet_addr)
 {
 	char *ethaddr_str;
 
@@ -123,7 +123,6 @@ int prom_get_ethernet_addr(char *ethernet_addr)
 
 	return 0;
 }
-EXPORT_SYMBOL(prom_get_ethernet_addr);
 
 void __init prom_free_prom_memory(void)
 {

arch/mips/boot/compressed/Makefile

@@ -59,7 +59,7 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
 hostprogs-y := calc_vmlinuz_load_addr
 
 VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
-		$(objtree)/$(KBUILD_IMAGE) $(VMLINUX_LOAD_ADDRESS))
+		$(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
 
 vmlinuzobjs-y += $(obj)/piggy.o
 

arch/mips/cavium-octeon/Kconfig

@@ -83,3 +83,7 @@ config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_STATIC
 	depends on CPU_CAVIUM_OCTEON
+
+config CAVIUM_OCTEON_HELPER
+	def_bool y
+	depends on OCTEON_ETHERNET || PCI

arch/mips/cavium-octeon/cpu.c

@@ -41,7 +41,7 @@ static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action,
 	return NOTIFY_OK;		/* Let default notifier send signals */
 }
 
-static int cnmips_cu2_setup(void)
+static int __init cnmips_cu2_setup(void)
 {
 	return cu2_notifier(cnmips_cu2_call, 0);
 }

arch/mips/cavium-octeon/executive/Makefile

@@ -11,4 +11,4 @@
 
 obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o
 
-obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-jtag.o
+obj-$(CONFIG_CAVIUM_OCTEON_HELPER) += cvmx-helper-errata.o cvmx-helper-jtag.o

arch/mips/include/asm/atomic.h

@@ -782,6 +782,10 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
  */
 #define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0)
 
+#else /* !CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
 #endif /* CONFIG_64BIT */
 
 /*

arch/mips/include/asm/compat.h

@@ -145,7 +145,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = (struct pt_regs *)
 		((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;

arch/mips/include/asm/cop2.h

@@ -24,7 +24,7 @@ extern int cu2_notifier_call_chain(unsigned long val, void *v);
 
 #define cu2_notifier(fn, pri)						\
 ({									\
-	static struct notifier_block fn##_nb __cpuinitdata = {		\
+	static struct notifier_block fn##_nb = {			\
 		.notifier_call = fn,					\
 		.priority = pri						\
 	};								\

arch/mips/include/asm/gic.h

@@ -321,6 +321,7 @@ struct gic_intrmask_regs {
  */
 struct gic_intr_map {
 	unsigned int cpunum;	/* Directed to this CPU */
+#define GIC_UNUSED		0xdead			/* Dummy data */
 	unsigned int pin;	/* Directed to this Pin */
 	unsigned int polarity;	/* Polarity : +/-	*/
 	unsigned int trigtype;	/* Trigger  : Edge/Levl */

arch/mips/include/asm/mach-tx49xx/kmalloc.h

@@ -1,6 +1,6 @@
 #ifndef __ASM_MACH_TX49XX_KMALLOC_H
 #define __ASM_MACH_TX49XX_KMALLOC_H
 
-#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
 
 #endif /* __ASM_MACH_TX49XX_KMALLOC_H */

arch/mips/include/asm/mips-boards/maltaint.h

@@ -88,9 +88,6 @@
 
 #define GIC_EXT_INTR(x)		x
 
-/* Dummy data */
-#define X			0xdead
-
 /* External Interrupts used for IPI */
 #define GIC_IPI_EXT_INTR_RESCHED_VPE0	16
 #define GIC_IPI_EXT_INTR_CALLFNC_VPE0	17

arch/mips/include/asm/page.h

@@ -150,6 +150,20 @@ typedef struct { unsigned long pgprot; } pgprot_t;
     ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
 #endif
 #define __va(x)		((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+
+/*
+ * RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad
+ * (lmo) rsp. 8431fd094d625b94d364fe393076ccef88e6ce18 (kernel.org).  The
+ * discussion can be found in lkml posting
+ * <a2ebde260608230500o3407b108hc03debb9da6e62c@mail.gmail.com> which is
+ * archived at http://lists.linuxcoding.com/kernel/2006-q3/msg17360.html
+ *
+ * It is unclear if the misscompilations mentioned in
+ * http://lkml.org/lkml/2010/8/8/138 also affect MIPS so we keep this one
+ * until GCC 3.x has been retired before we can apply
+ * https://patchwork.linux-mips.org/patch/1541/
+ */
+
 #define __pa_symbol(x)	__pa(RELOC_HIDE((unsigned long)(x), 0))
 
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)

arch/mips/include/asm/thread_info.h

@@ -146,7 +146,8 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
 
 /* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK		(0x0000ffef & ~_TIF_SECCOMP)
+#define _TIF_WORK_MASK		(0x0000ffef &				\
+					~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT))
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	(0x8000ffff & ~_TIF_SECCOMP)
 

arch/mips/include/asm/unistd.h

@@ -356,16 +356,19 @@
 #define __NR_perf_event_open		(__NR_Linux + 333)
 #define __NR_accept4			(__NR_Linux + 334)
 #define __NR_recvmmsg			(__NR_Linux + 335)
+#define __NR_fanotify_init		(__NR_Linux + 336)
+#define __NR_fanotify_mark		(__NR_Linux + 337)
+#define __NR_prlimit64			(__NR_Linux + 338)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		335
+#define __NR_Linux_syscalls		338
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		335
+#define __NR_O32_Linux_syscalls		338
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -668,16 +671,19 @@
 #define __NR_perf_event_open		(__NR_Linux + 292)
 #define __NR_accept4			(__NR_Linux + 293)
 #define __NR_recvmmsg			(__NR_Linux + 294)
+#define __NR_fanotify_init		(__NR_Linux + 295)
+#define __NR_fanotify_mark		(__NR_Linux + 296)
+#define __NR_prlimit64			(__NR_Linux + 297)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		294
+#define __NR_Linux_syscalls		297
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		294
+#define __NR_64_Linux_syscalls		297
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -985,16 +991,19 @@
 #define __NR_accept4			(__NR_Linux + 297)
 #define __NR_recvmmsg			(__NR_Linux + 298)
 #define __NR_getdents64			(__NR_Linux + 299)
+#define __NR_fanotify_init		(__NR_Linux + 300)
+#define __NR_fanotify_mark		(__NR_Linux + 301)
+#define __NR_prlimit64			(__NR_Linux + 302)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		299
+#define __NR_Linux_syscalls		302
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		299
+#define __NR_N32_Linux_syscalls		302
 
 #ifdef __KERNEL__
 

arch/mips/kernel/irq-gic.c

@@ -7,7 +7,6 @@
 #include <asm/io.h>
 #include <asm/gic.h>
 #include <asm/gcmpregs.h>
-#include <asm/mips-boards/maltaint.h>
 #include <asm/irq.h>
 #include <linux/hardirq.h>
 #include <asm-generic/bitops/find.h>
@@ -131,7 +130,7 @@ static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	int		i;
 
 	irq -= _irqbase;
-	pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq);
+	pr_debug("%s(%d) called\n", __func__, irq);
 	cpumask_and(&tmp, cpumask, cpu_online_mask);
 	if (cpus_empty(tmp))
 		return -1;
@@ -222,7 +221,7 @@ static void __init gic_basic_init(int numintrs, int numvpes,
 	/* Setup specifics */
 	for (i = 0; i < mapsize; i++) {
 		cpu = intrmap[i].cpunum;
-		if (cpu == X)
+		if (cpu == GIC_UNUSED)
 			continue;
 		if (cpu == 0 && i != 0 && intrmap[i].flags == 0)
 			continue;