Merge branches 'sched/clock', 'sched/urgent' and 'linus' into sched/core

Documentation/ABI/testing/sysfs-bus-pci

@@ -1,3 +1,46 @@
+What:		/sys/bus/pci/drivers/.../bind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause
+		the driver to attempt to bind to the device found at
+		this location.	This is useful for overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/.  For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../unbind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause the
+		driver to attempt to unbind from the device found at
+		this location.	This may be useful when overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/. For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../new_id
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a PCI device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time.  The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM PPPP.  That is Vendor ID,
+		Device ID, Subsystem Vendor ID, Subsystem Device ID,
+		Class, Class Mask, and Private Driver Data.  The Vendor ID
+		and Device ID fields are required, the rest are optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bhutchings@solarflare.com>

Documentation/dvb/README.flexcop

@@ -1,205 +0,0 @@
-This README escorted the skystar2-driver rewriting procedure. It describes the
-state of the new flexcop-driver set and some internals are written down here
-too.
-
-This document hopefully describes things about the flexcop and its
-device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
-drivers based on the skystar2.c and other information.
-
-Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
-touched and rewritten.
-
-History & News
-==============
-  2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
-
-
-
-
-General coding processing
-=========================
-
-We should proceed as follows (as long as no one complains):
-
-0) Think before start writing code!
-
-1) rewriting the skystar2.c with the help of the flexcop register descriptions
-and splitting up the files to a pci-bus-part and a flexcop-part.
-The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
-device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
-
-2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
-and other pci drivers)
-
-3) make some beautification (see 'Improvements when rewriting (refactoring) is
-done')
-
-4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
-a wider tester audience.
-
-5) creating an usb-bus-part using the already written flexcop code for the pci
-card.
-
-Idea: create a kernel-object for the flexcop and export all important
-functions. This option saves kernel-memory, but maybe a lot of functions have
-to be exported to kernel namespace.
-
-
-Current situation
-=================
-
-0) Done :)
-1) Done (some minor issues left)
-2) Done
-3) Not ready yet, more information is necessary
-4) next to be done (see the table below)
-5) USB driver is working (yes, there are some minor issues)
-
-What seems to be ready?
------------------------
-
-1) Rewriting
-1a) i2c is cut off from the flexcop-pci.c and seems to work
-1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1e) eeprom (reading MAC address)
-1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
-1f) misc. register accesses for reading parameters (e.g. resetting, revision)
-1g) pid/mac filter (flexcop-hw-filter.c)
-1i) dvb-stuff initialization in flexcop.c (done)
-1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
-1j) remove flexcop initialization from flexcop-pci.c completely (done)
-1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
-1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
-non-static where possible, moved code to proper places)
-
-2) Search for errors in the leftover of flexcop-pci.c (partially done)
-5a) add MAC address reading
-5c) feeding of ISOC data to the software demux (format of the isochronous data
-and speed optimization, no real error) (thanks to Vadim Catana)
-
-What to do in the near future?
---------------------------------------
-(no special order here)
-
-5) USB driver
-5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
-
-Testing changes
----------------
-
-O             = item is working
-P             = item is partially working
-X             = item is not working
-N             = item does not apply here
-<empty field> = item need to be examined
-
-       | PCI                               | USB
-item   | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
--------+-------+---------+---------+-------+-------+---------+---------+-------
-1a)    | O     |         |         |       | N     | N       | N       | N
-1b)    | O     |         |         |       |       |         | O       |
-1c)    | N     | N       |         |       | N     | N       | O       |
-1d)    |                 O                 |                 O
-1e)    |                 O                 |                 O
-1f)    |                                   P
-1g)    |                                   O
-1h)    |                 P                 |
-1i)    |                 O                 |                 N
-1j)    |                 O                 |                 N
-1l)    |                 O                 |                 N
-2)     |                 O                 |                 N
-5a)    |                 N                 |                 O
-5b)*   |                 N                 |
-5c)    |                 N                 |                 O
-
-* - not done yet
-
-Known bugs and problems and TODO
---------------------------------
-
-1g/h/l) when pid filtering is enabled on the pci card
-
-DMA usage currently:
-  The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
-  address and triggers an IRQ when it's full and starts writing to the second
-  address. When the second address is full, the IRQ is triggered again, and
-  the flexcop writes to first address again, and so on.
-  The buffersize of each address is currently 640*188 bytes.
-
-  Problem is, when using hw-pid-filtering and doing some low-bandwidth
-  operation (like scanning) the buffers won't be filled enough to trigger
-  the IRQ. That's why:
-
-  When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
-  is triggered.  Is the current write address of DMA1 different to the one
-  during the last IRQ, then the data is passed to the demuxer.
-
-  There is an additional DMA-IRQ-method: packet count IRQ. This isn't
-  implemented correctly yet.
-
-  The solution is to disable HW PID filtering, but I don't know how the DVB
-  API software demux behaves on slow systems with 45MBit/s TS.
-
-Solved bugs :)
---------------
-1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
-working)
-SOLUTION: also index 0 was affected, because net_translation is done for
-these indexes by default
-
-5b) isochronous transfer does only work in the first attempt (for the Sky2PC
-USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
-woke up again (don't know if this need fixes, see
-flexcop-fe-tuner.c:flexcop_sleep)
-
-NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
-anything in the while the driver is loaded the first time), no transfers take
-place anymore.
-
-Improvements when rewriting (refactoring) is done
-=================================================
-
-- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
-  (enable sleeping for other demods than dvb-s)
-- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
-
-Debugging
----------
-- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
-  with this flexcop, this is important, because i2c is now using the
-  flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
-  that, please tell us so).
-
-Everything which is identical in the following table, can be put into a common
-flexcop-module.
-
-		  PCI                  USB
--------------------------------------------------------------------------------
-Different:
-Register access:  accessing IO memory  USB control message
-I2C bus:          I2C bus of the FC    USB control message
-Data transfer:    DMA                  isochronous transfer
-EEPROM transfer:  through i2c bus      not clear yet
-
-Identical:
-Streaming:                 accessing registers
-PID Filtering:             accessing registers
-Sram destinations:         accessing registers
-Tuner/Demod:                     I2C bus
-DVB-stuff:            can be written for common use
-
-Acknowledgements (just for the rewriting part)
-================
-
-Bjarne Steinsbo thought a lot in the first place of the pci part for this code
-sharing idea.
-
-Andreas Oberritter for providing a recent PCI initialization template
-(pluto2.c).
-
-Boleslaw Ciesielski for pointing out a problem with firmware loader.
-
-Vadim Catana for correcting the USB transfer.
-
-comments, critics and ideas to linux-dvb@linuxtv.org.

Documentation/dvb/technisat.txt

@@ -1,5 +1,5 @@
-How to set up the Technisat devices
-===================================
+How to set up the Technisat/B2C2 Flexcop devices
+================================================
 
 1) Find out what device you have
 ================================
@@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)...
 
 If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
 "Multimedia devices" => "Customise analog and hybrid tuner modules to build"
-In this directory uncheck every driver which is activated there.
+In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
 
 Then please activate:
 2a) Main module part:
 
 a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
-b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
+b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
+OR
 c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
 d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
 Notice: d.) is helpful for troubleshooting
 
 2b) Frontend module part:
 
-1.) Revision 2.3:
+1.) SkyStar DVB-S Revision 2.3:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
 
-2.) Revision 2.6:
+2.) SkyStar DVB-S Revision 2.6:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
 
-3.) Revision 2.7:
+3.) SkyStar DVB-S Revision 2.7:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
 c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
 d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
 
-4.) Revision 2.8:
+4.) SkyStar DVB-S Revision 2.8:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
 c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
 d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
 
-5.) DVB-T card:
+5.) AirStar DVB-T card:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
 
-6.) DVB-C card:
+6.) CableStar DVB-C card:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
 
-7.) ATSC card 1st generation:
+7.) AirStar ATSC card 1st generation:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
 
-8.) ATSC card 2nd generation:
+8.) AirStar ATSC card 2nd generation:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
-c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
 
-Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
+9.) AirStar ATSC card 3rd generation:
+a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
+
+Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009

Documentation/kernel-parameters.txt

@@ -114,7 +114,7 @@ In addition, the following text indicates that the option:
 Parameters denoted with BOOT are actually interpreted by the boot
 loader, and have no meaning to the kernel directly.
 Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/i386/boot.txt>.
+need or coordination with <Documentation/x86/boot.txt>.
 
 There are also arch-specific kernel-parameters not documented here.
 See for example <Documentation/x86/x86_64/boot-options.txt>.
@@ -868,8 +868,10 @@ and is between 256 and 4096 characters. It is defined in the file
 	icn=		[HW,ISDN]
 			Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
 
-	ide=		[HW] (E)IDE subsystem
-			Format: ide=nodma or ide=doubler
+	ide-core.nodma=	[HW] (E)IDE subsystem
+			Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
+			.vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
+			.chs .ignore_cable are additional options
 			See Documentation/ide/ide.txt.
 
 	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
@@ -2449,7 +2451,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/fb/modedb.txt.
 
 	vga=		[BOOT,X86-32] Select a particular video mode
-			See Documentation/x86/i386/boot.txt and
+			See Documentation/x86/boot.txt and
 			Documentation/svga.txt.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is

arch/arm/mach-davinci/board-evm.c

@@ -311,6 +311,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
 	gpio_request(gpio + 7, "nCF_SEL");
 	gpio_direction_output(gpio + 7, 1);
 
+	/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+	setup_usb(500, 8);
+
 	return 0;
 }
 
@@ -417,9 +420,6 @@ static __init void davinci_evm_init(void)
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
-
-	/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
-	setup_usb(500, 8);
 }
 
 static __init void davinci_evm_irq_init(void)

arch/arm/mach-davinci/clock.c

@@ -230,6 +230,11 @@ static struct clk davinci_clks[] = {
 		.rate = &commonrate,
 		.lpsc = DAVINCI_LPSC_GPIO,
 	},
+	{
+		.name = "usb",
+		.rate = &commonrate,
+		.lpsc = DAVINCI_LPSC_USB,
+	},
 	{
 		.name = "AEMIFCLK",
 		.rate = &commonrate,

arch/arm/mach-davinci/usb.c

@@ -47,6 +47,7 @@ static struct musb_hdrc_platform_data usb_data = {
 #elif defined(CONFIG_USB_MUSB_HOST)
 	.mode           = MUSB_HOST,
 #endif
+	.clock		= "usb",
 	.config		= &musb_config,
 };
 

arch/ia64/Kconfig

@@ -638,6 +638,17 @@ config DMAR
 	  and include PCI device scope covered by these DMA
 	  remapping devices.
 
+config DMAR_DEFAULT_ON
+	def_bool y
+	prompt "Enable DMA Remapping Devices by default"
+	depends on DMAR
+	help
+	  Selecting this option will enable a DMAR device at boot time if
+	  one is found. If this option is not selected, DMAR support can
+	  be enabled by passing intel_iommu=on to the kernel. It is
+	  recommended you say N here while the DMAR code remains
+	  experimental.
+
 endmenu
 
 endif

arch/ia64/kernel/iosapic.c

@@ -507,7 +507,7 @@ static int iosapic_find_sharable_irq(unsigned long trigger, unsigned long pol)
 	if (trigger == IOSAPIC_EDGE)
 		return -EINVAL;
 
-	for (i = 0; i <= NR_IRQS; i++) {
+	for (i = 0; i < NR_IRQS; i++) {
 		info = &iosapic_intr_info[i];
 		if (info->trigger == trigger && info->polarity == pol &&
 		    (info->dmode == IOSAPIC_FIXED ||

arch/ia64/kernel/unwind.c

@@ -2149,7 +2149,7 @@ unw_remove_unwind_table (void *handle)
 
 	/* next, remove hash table entries for this table */
 
-	for (index = 0; index <= UNW_HASH_SIZE; ++index) {
+	for (index = 0; index < UNW_HASH_SIZE; ++index) {
 		tmp = unw.cache + unw.hash[index];
 		if (unw.hash[index] >= UNW_CACHE_SIZE
 		    || tmp->ip < table->start || tmp->ip >= table->end)

arch/mips/Kconfig

@@ -603,7 +603,7 @@ config CAVIUM_OCTEON_SIMULATOR
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select CPU_CAVIUM_OCTEON
+	select SYS_HAS_CPU_CAVIUM_OCTEON
 	help
 	  The Octeon simulator is software performance model of the Cavium
 	  Octeon Processor. It supports simulating Octeon processors on x86
@@ -618,7 +618,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_HAS_EARLY_PRINTK
-	select CPU_CAVIUM_OCTEON
+	select SYS_HAS_CPU_CAVIUM_OCTEON
 	select SWAP_IO_SPACE
 	help
 	  This option supports all of the Octeon reference boards from Cavium
@@ -1234,6 +1234,7 @@ config CPU_SB1
 
 config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
+	depends on SYS_HAS_CPU_CAVIUM_OCTEON
 	select IRQ_CPU
 	select IRQ_CPU_OCTEON
 	select CPU_HAS_PREFETCH
@@ -1314,6 +1315,9 @@ config SYS_HAS_CPU_RM9000
 config SYS_HAS_CPU_SB1
 	bool
 
+config SYS_HAS_CPU_CAVIUM_OCTEON
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -1387,6 +1391,7 @@ config 32BIT
 config 64BIT
 	bool "64-bit kernel"
 	depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
+	select HAVE_SYSCALL_WRAPPERS
 	help
 	  Select this option if you want to build a 64-bit kernel.
 

arch/mips/alchemy/common/time.c

@@ -118,7 +118,7 @@ void __init plat_time_init(void)
 	 * setup counter 1 (RTC) to tick at full speed
 	 */
 	t = 0xffffff;
-	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
+	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t)
 		asm volatile ("nop");
 	if (!t)
 		goto cntr_err;
@@ -127,7 +127,7 @@ void __init plat_time_init(void)
 	au_sync();
 
 	t = 0xffffff;
-	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
 		asm volatile ("nop");
 	if (!t)
 		goto cntr_err;
@@ -135,7 +135,7 @@ void __init plat_time_init(void)
 	au_sync();
 
 	t = 0xffffff;
-	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
 		asm volatile ("nop");
 	if (!t)
 		goto cntr_err;

arch/mips/kernel/irq.c

@@ -111,7 +111,6 @@ int show_interrupts(struct seq_file *p, void *v)
 			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->name);
-		seq_printf(p, "-%-8s", irq_desc[i].name);
 		seq_printf(p, "  %s", action->name);
 
 		for (action=action->next; action; action = action->next)

arch/mips/kernel/linux32.c

@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/binfmts.h>
 #include <linux/security.h>
+#include <linux/syscalls.h>
 #include <linux/compat.h>
 #include <linux/vfs.h>
 #include <linux/ipc.h>
@@ -63,9 +64,9 @@
 #define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
 #endif
 
-asmlinkage unsigned long
-sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
-         unsigned long flags, unsigned long fd, unsigned long pgoff)
+SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len,
+	unsigned long, prot, unsigned long, flags, unsigned long, fd,
+	unsigned long, pgoff)
 {
 	struct file * file = NULL;
 	unsigned long error;
@@ -121,21 +122,21 @@ struct rlimit32 {
 	int	rlim_max;
 };
 
-asmlinkage long sys32_truncate64(const char __user * path,
-	unsigned long __dummy, int a2, int a3)
+SYSCALL_DEFINE4(32_truncate64, const char __user *, path,
+	unsigned long, __dummy, unsigned long, a2, unsigned long, a3)
 {
 	return sys_truncate(path, merge_64(a2, a3));
 }
 
-asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
-	int a2, int a3)
+SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy,
+	unsigned long, a2, unsigned long, a3)
 {
 	return sys_ftruncate(fd, merge_64(a2, a3));
 }
 
-asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
-			    unsigned int offset_low, loff_t __user * result,
-			    unsigned int origin)
+SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high,
+	unsigned long, offset_low, loff_t __user *, result,
+	unsigned long, origin)
 {
 	return sys_llseek(fd, offset_high, offset_low, result, origin);
 }
@@ -144,20 +145,20 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
    lseek back to original location.  They fail just like lseek does on
    non-seekable files.  */
 
-asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf,
-			       size_t count, u32 unused, u64 a4, u64 a5)
+SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count,
+	unsigned long, unused, unsigned long, a4, unsigned long, a5)
 {
 	return sys_pread64(fd, buf, count, merge_64(a4, a5));
 }
 
-asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf,
-			        size_t count, u32 unused, u64 a4, u64 a5)
+SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf,
+	size_t, count, u32, unused, u64, a4, u64, a5)
 {
 	return sys_pwrite64(fd, buf, count, merge_64(a4, a5));
 }
 
-asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
-	struct compat_timespec __user *interval)
+SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid,
+	struct compat_timespec __user *, interval)
 {
 	struct timespec t;
 	int ret;
@@ -174,8 +175,8 @@ asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
 
 #ifdef CONFIG_SYSVIPC
 
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
+	unsigned long, ptr, unsigned long, fifth)
 {
 	int version, err;
 
@@ -233,8 +234,8 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
 
 #else
 
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third,
+	u32, ptr, u32 fifth)
 {
 	return -ENOSYS;
 }
@@ -242,7 +243,7 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
 #endif /* CONFIG_SYSVIPC */
 
 #ifdef CONFIG_MIPS32_N32
-asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
+SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg)
 {
 	/* compat_sys_semctl expects a pointer to union semun */
 	u32 __user *uptr = compat_alloc_user_space(sizeof(u32));
@@ -251,13 +252,14 @@ asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
 	return compat_sys_semctl(semid, semnum, cmd, uptr);
 }
 
-asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg)
+SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz,
+	int, msgflg)
 {
 	return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp));
 }
 
-asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp,
-			      int msgflg)
+SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
+	int, msgtyp, int, msgflg)
 {
 	return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64,
 				 compat_ptr(msgp));
@@ -277,7 +279,7 @@ struct sysctl_args32
 
 #ifdef CONFIG_SYSCTL_SYSCALL
 
-asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
+SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
 {
 	struct sysctl_args32 tmp;
 	int error;
@@ -316,9 +318,16 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
 	return error;
 }
 
+#else
+
+SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
+{
+	return -ENOSYS;
+}
+
 #endif /* CONFIG_SYSCTL_SYSCALL */
 
-asmlinkage long sys32_newuname(struct new_utsname __user * name)
+SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
 {
 	int ret = 0;
 
@@ -334,7 +343,7 @@ asmlinkage long sys32_newuname(struct new_utsname __user * name)
 	return ret;
 }
 
-asmlinkage int sys32_personality(unsigned long personality)
+SYSCALL_DEFINE1(32_personality, unsigned long, personality)
 {
 	int ret;
 	personality &= 0xffffffff;
@@ -357,7 +366,7 @@ struct ustat32 {
 
 extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf);
 
-asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32)
+SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32)
 {
 	int err;
 	struct ustat tmp;
@@ -381,8 +390,8 @@ out:
 	return err;
 }
 
-asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
-	s32 count)
+SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd,
+	compat_off_t __user *, offset, s32, count)
 {
 	mm_segment_t old_fs = get_fs();
 	int ret;

arch/mips/kernel/scall32-o32.S

@@ -399,7 +399,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_swapon		2
 	sys	sys_reboot		3
 	sys	sys_old_readdir		3
-	sys	old_mmap		6	/* 4090 */
+	sys	sys_mips_mmap		6	/* 4090 */
 	sys	sys_munmap		2
 	sys	sys_truncate		2
 	sys	sys_ftruncate		2
@@ -519,7 +519,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_sendfile		4
 	sys	sys_ni_syscall		0
 	sys	sys_ni_syscall		0
-	sys	sys_mmap2		6	/* 4210 */
+	sys	sys_mips_mmap2		6	/* 4210 */
 	sys	sys_truncate64		4
 	sys	sys_ftruncate64		4
 	sys	sys_stat64		2

arch/mips/kernel/scall64-64.S

@@ -207,7 +207,7 @@ sys_call_table:
 	PTR	sys_newlstat
 	PTR	sys_poll
 	PTR	sys_lseek
-	PTR	old_mmap
+	PTR	sys_mips_mmap
 	PTR	sys_mprotect			/* 5010 */
 	PTR	sys_munmap
 	PTR	sys_brk

arch/mips/kernel/scall64-n32.S

@@ -129,12 +129,12 @@ EXPORT(sysn32_call_table)
 	PTR	sys_newlstat
 	PTR	sys_poll
 	PTR	sys_lseek
-	PTR	old_mmap
+	PTR	sys_mips_mmap
 	PTR	sys_mprotect			/* 6010 */
 	PTR	sys_munmap
 	PTR	sys_brk
-	PTR	sys32_rt_sigaction
-	PTR	sys32_rt_sigprocmask
+	PTR	sys_32_rt_sigaction
+	PTR	sys_32_rt_sigprocmask
 	PTR	compat_sys_ioctl		/* 6015 */
 	PTR	sys_pread64
 	PTR	sys_pwrite64
@@ -159,7 +159,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_setitimer
 	PTR	sys_alarm
 	PTR	sys_getpid
-	PTR	sys32_sendfile
+	PTR	sys_32_sendfile
 	PTR	sys_socket			/* 6040 */
 	PTR	sys_connect
 	PTR	sys_accept
@@ -181,14 +181,14 @@ EXPORT(sysn32_call_table)
 	PTR	sys_exit
 	PTR	compat_sys_wait4
 	PTR	sys_kill			/* 6060 */
-	PTR	sys32_newuname
+	PTR	sys_32_newuname
 	PTR	sys_semget
 	PTR	sys_semop
-	PTR	sysn32_semctl
+	PTR	sys_n32_semctl
 	PTR	sys_shmdt			/* 6065 */
 	PTR	sys_msgget
-	PTR	sysn32_msgsnd
-	PTR	sysn32_msgrcv
+	PTR	sys_n32_msgsnd
+	PTR	sys_n32_msgrcv
 	PTR	compat_sys_msgctl
 	PTR	compat_sys_fcntl		/* 6070 */
 	PTR	sys_flock
@@ -245,15 +245,15 @@ EXPORT(sysn32_call_table)
 	PTR	sys_getsid
 	PTR	sys_capget
 	PTR	sys_capset
-	PTR	sys32_rt_sigpending		/* 6125 */
+	PTR	sys_32_rt_sigpending		/* 6125 */
 	PTR	compat_sys_rt_sigtimedwait
-	PTR	sys32_rt_sigqueueinfo
+	PTR	sys_32_rt_sigqueueinfo
 	PTR	sysn32_rt_sigsuspend
 	PTR	sys32_sigaltstack
 	PTR	compat_sys_utime		/* 6130 */
 	PTR	sys_mknod
-	PTR	sys32_personality
-	PTR	sys32_ustat
+	PTR	sys_32_personality
+	PTR	sys_32_ustat
 	PTR	compat_sys_statfs
 	PTR	compat_sys_fstatfs		/* 6135 */
 	PTR	sys_sysfs
@@ -265,14 +265,14 @@ EXPORT(sysn32_call_table)
 	PTR	sys_sched_getscheduler
 	PTR	sys_sched_get_priority_max
 	PTR	sys_sched_get_priority_min
-	PTR	sys32_sched_rr_get_interval	/* 6145 */
+	PTR	sys_32_sched_rr_get_interval	/* 6145 */
 	PTR	sys_mlock
 	PTR	sys_munlock
 	PTR	sys_mlockall
 	PTR	sys_munlockall
 	PTR	sys_vhangup			/* 6150 */
 	PTR	sys_pivot_root
-	PTR	sys32_sysctl
+	PTR	sys_32_sysctl
 	PTR	sys_prctl
 	PTR	compat_sys_adjtimex
 	PTR	compat_sys_setrlimit		/* 6155 */

arch/mips/kernel/scall64-o32.S

@@ -265,12 +265,12 @@ sys_call_table:
 	PTR	sys_olduname
 	PTR	sys_umask			/* 4060 */
 	PTR	sys_chroot
-	PTR	sys32_ustat
+	PTR	sys_32_ustat
 	PTR	sys_dup2
 	PTR	sys_getppid
 	PTR	sys_getpgrp			/* 4065 */
 	PTR	sys_setsid
-	PTR	sys32_sigaction
+	PTR	sys_32_sigaction
 	PTR	sys_sgetmask
 	PTR	sys_ssetmask
 	PTR	sys_setreuid			/* 4070 */
@@ -293,7 +293,7 @@ sys_call_table:
 	PTR	sys_swapon
 	PTR	sys_reboot
 	PTR	compat_sys_old_readdir
-	PTR	old_mmap			/* 4090 */
+	PTR	sys_mips_mmap			/* 4090 */
 	PTR	sys_munmap
 	PTR	sys_truncate
 	PTR	sys_ftruncate
@@ -320,12 +320,12 @@ sys_call_table:
 	PTR	compat_sys_wait4
 	PTR	sys_swapoff			/* 4115 */
 	PTR	compat_sys_sysinfo
-	PTR	sys32_ipc
+	PTR	sys_32_ipc
 	PTR	sys_fsync
 	PTR	sys32_sigreturn
 	PTR	sys32_clone			/* 4120 */
 	PTR	sys_setdomainname
-	PTR	sys32_newuname
+	PTR	sys_32_newuname
 	PTR	sys_ni_syscall			/* sys_modify_ldt */
 	PTR	compat_sys_adjtimex
 	PTR	sys_mprotect			/* 4125 */
@@ -339,11 +339,11 @@ sys_call_table:
 	PTR	sys_fchdir
 	PTR	sys_bdflush
 	PTR	sys_sysfs			/* 4135 */
-	PTR	sys32_personality
+	PTR	sys_32_personality
 	PTR	sys_ni_syscall	 		/* for afs_syscall */
 	PTR	sys_setfsuid
 	PTR	sys_setfsgid
-	PTR	sys32_llseek			/* 4140 */
+	PTR	sys_32_llseek			/* 4140 */
 	PTR	compat_sys_getdents
 	PTR	compat_sys_select
 	PTR	sys_flock
@@ -356,7 +356,7 @@ sys_call_table:
 	PTR	sys_ni_syscall			/* 4150 */
 	PTR	sys_getsid
 	PTR	sys_fdatasync
-	PTR	sys32_sysctl
+	PTR	sys_32_sysctl
 	PTR	sys_mlock
 	PTR	sys_munlock			/* 4155 */
 	PTR	sys_mlockall
@@ -368,7 +368,7 @@ sys_call_table:
 	PTR	sys_sched_yield
 	PTR	sys_sched_get_priority_max
 	PTR	sys_sched_get_priority_min
-	PTR	sys32_sched_rr_get_interval 	/* 4165 */
+	PTR	sys_32_sched_rr_get_interval 	/* 4165 */
 	PTR	compat_sys_nanosleep
 	PTR	sys_mremap
 	PTR	sys_accept
@@ -397,25 +397,25 @@ sys_call_table:
 	PTR	sys_getresgid
 	PTR	sys_prctl
 	PTR	sys32_rt_sigreturn
-	PTR	sys32_rt_sigaction
-	PTR	sys32_rt_sigprocmask 		/* 4195 */
-	PTR	sys32_rt_sigpending
+	PTR	sys_32_rt_sigaction
+	PTR	sys_32_rt_sigprocmask 		/* 4195 */
+	PTR	sys_32_rt_sigpending
 	PTR	compat_sys_rt_sigtimedwait
-	PTR	sys32_rt_sigqueueinfo
+	PTR	sys_32_rt_sigqueueinfo
 	PTR	sys32_rt_sigsuspend
-	PTR	sys32_pread			/* 4200 */
-	PTR	sys32_pwrite
+	PTR	sys_32_pread			/* 4200 */
+	PTR	sys_32_pwrite
 	PTR	sys_chown
 	PTR	sys_getcwd
 	PTR	sys_capget
 	PTR	sys_capset			/* 4205 */
 	PTR	sys32_sigaltstack
-	PTR	sys32_sendfile
+	PTR	sys_32_sendfile
 	PTR	sys_ni_syscall
 	PTR	sys_ni_syscall
-	PTR	sys32_mmap2			/* 4210 */
-	PTR	sys32_truncate64
-	PTR	sys32_ftruncate64
+	PTR	sys_mips_mmap2			/* 4210 */
+	PTR	sys_32_truncate64
+	PTR	sys_32_ftruncate64
 	PTR	sys_newstat
 	PTR	sys_newlstat
 	PTR	sys_newfstat			/* 4215 */
@@ -481,7 +481,7 @@ sys_call_table:
 	PTR	compat_sys_mq_notify		/* 4275 */
 	PTR	compat_sys_mq_getsetattr
 	PTR	sys_ni_syscall			/* sys_vserver */
-	PTR	sys32_waitid
+	PTR	sys_32_waitid
 	PTR	sys_ni_syscall			/* available, was setaltroot */
 	PTR	sys_add_key			/* 4280 */
 	PTR	sys_request_key

arch/mips/kernel/signal.c

@@ -19,6 +19,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/compiler.h>
+#include <linux/syscalls.h>
 #include <linux/uaccess.h>
 
 #include <asm/abi.h>
@@ -338,8 +339,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 }
 
 #ifdef CONFIG_TRAD_SIGNALS
-asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act,
-	struct sigaction __user *oact)
+SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act,
+	struct sigaction __user *, oact)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;

arch/mips/kernel/signal32.c

@@ -349,8 +349,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 	return -ERESTARTNOHAND;
 }
 
-asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act,
-                               struct sigaction32 __user *oact)
+SYSCALL_DEFINE3(32_sigaction, long, sig, const struct sigaction32 __user *, act,
+	struct sigaction32 __user *, oact)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
@@ -704,9 +704,9 @@ struct mips_abi mips_abi_32 = {
 	.restart	= __NR_O32_restart_syscall
 };
 
-asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
-				  struct sigaction32 __user *oact,
-				  unsigned int sigsetsize)
+SYSCALL_DEFINE4(32_rt_sigaction, int, sig,
+	const struct sigaction32 __user *, act,
+	struct sigaction32 __user *, oact, unsigned int, sigsetsize)
 {
 	struct k_sigaction new_sa, old_sa;
 	int ret = -EINVAL;
@@ -748,8 +748,8 @@ out:
 	return ret;
 }
 
-asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
-	compat_sigset_t __user *oset, unsigned int sigsetsize)
+SYSCALL_DEFINE4(32_rt_sigprocmask, int, how, compat_sigset_t __user *, set,
+	compat_sigset_t __user *, oset, unsigned int, sigsetsize)
 {
 	sigset_t old_set, new_set;
 	int ret;
@@ -770,8 +770,8 @@ asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
 	return ret;
 }
 
-asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
-	unsigned int sigsetsize)
+SYSCALL_DEFINE2(32_rt_sigpending, compat_sigset_t __user *, uset,
+	unsigned int, sigsetsize)
 {
 	int ret;
 	sigset_t set;
@@ -787,7 +787,8 @@ asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
 	return ret;
 }
 
-asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
+SYSCALL_DEFINE3(32_rt_sigqueueinfo, int, pid, int, sig,
+	compat_siginfo_t __user *, uinfo)
 {
 	siginfo_t info;
 	int ret;
@@ -802,10 +803,9 @@ asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *
 	return ret;
 }
 
-asmlinkage long
-sys32_waitid(int which, compat_pid_t pid,
-	     compat_siginfo_t __user *uinfo, int options,
-	     struct compat_rusage __user *uru)
+SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid,
+	     compat_siginfo_t __user *, uinfo, int, options,
+	     struct compat_rusage __user *, uru)
 {
 	siginfo_t info;
 	struct rusage ru;

arch/mips/kernel/syscall.c

@@ -152,9 +152,9 @@ out:
 	return error;
 }
 
-asmlinkage unsigned long
-old_mmap(unsigned long addr, unsigned long len, int prot,
-	int flags, int fd, off_t offset)
+SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
+	unsigned long, prot, unsigned long, flags, unsigned long,
+	fd, off_t, offset)
 {
 	unsigned long result;
 
@@ -168,9 +168,9 @@ out:
 	return result;
 }
 
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
-          unsigned long flags, unsigned long fd, unsigned long pgoff)
+SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len,
+	unsigned long, prot, unsigned long, flags, unsigned long, fd,
+	unsigned long, pgoff)
 {
 	if (pgoff & (~PAGE_MASK >> 12))
 		return -EINVAL;
@@ -240,7 +240,7 @@ out:
 /*
  * Compacrapability ...
  */
-asmlinkage int sys_uname(struct old_utsname __user * name)
+SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
 {
 	if (name && !copy_to_user(name, utsname(), sizeof (*name)))
 		return 0;
@@ -250,7 +250,7 @@ asmlinkage int sys_uname(struct old_utsname __user * name)
 /*
  * Compacrapability ...
  */
-asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
 {
 	int error;
 
@@ -279,7 +279,7 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name)
 	return error;
 }
 
-asmlinkage int sys_set_thread_area(unsigned long addr)
+SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
 {
 	struct thread_info *ti = task_thread_info(current);
 
@@ -290,7 +290,7 @@ asmlinkage int sys_set_thread_area(unsigned long addr)
 	return 0;
 }
 
-asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
+asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3)
 {
 	switch (cmd) {
 	case MIPS_ATOMIC_SET:
@@ -325,8 +325,8 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
  *
  * This is really horribly ugly.
  */
-asmlinkage int sys_ipc(unsigned int call, int first, int second,
-		       unsigned long third, void __user *ptr, long fifth)
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
+	unsigned long, third, void __user *, ptr, long, fifth)
 {
 	int version, ret;
 
@@ -411,7 +411,7 @@ asmlinkage int sys_ipc(unsigned int call, int first, int second,
 /*
  * No implemented yet ...
  */
-asmlinkage int sys_cachectl(char *addr, int nbytes, int op)
+SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
 {
 	return -ENOSYS;
 }

arch/mips/mm/cache.c

@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/syscalls.h>
 #include <linux/mm.h>
 
 #include <asm/cacheflush.h>
@@ -58,8 +59,8 @@ EXPORT_SYMBOL(_dma_cache_wback_inv);
  * We could optimize the case where the cache argument is not BCACHE but
  * that seems very atypical use ...
  */
-asmlinkage int sys_cacheflush(unsigned long addr,
-	unsigned long bytes, unsigned int cache)
+SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
+	unsigned int, cache)
 {
 	if (bytes == 0)
 		return 0;

arch/powerpc/kernel/align.c

@@ -367,27 +367,24 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
 			   unsigned int flags)
 {
-	char *ptr = (char *) &current->thread.TS_FPR(reg);
-	int i, ret;
+	char *ptr0 = (char *) &current->thread.TS_FPR(reg);
+	char *ptr1 = (char *) &current->thread.TS_FPR(reg+1);
+	int i, ret, sw = 0;
 
 	if (!(flags & F))
 		return 0;
 	if (reg & 1)
 		return 0;	/* invalid form: FRS/FRT must be even */
-	if (!(flags & SW)) {
-		/* not byte-swapped - easy */
-		if (!(flags & ST))
-			ret = __copy_from_user(ptr, addr, 16);
-		else
-			ret = __copy_to_user(addr, ptr, 16);
-	} else {
-		/* each FPR value is byte-swapped separately */
-		ret = 0;
-		for (i = 0; i < 16; ++i) {
-			if (!(flags & ST))
-				ret |= __get_user(ptr[i^7], addr + i);
-			else
-				ret |= __put_user(ptr[i^7], addr + i);
+	if (flags & SW)
+		sw = 7;
+	ret = 0;
+	for (i = 0; i < 8; ++i) {
+		if (!(flags & ST)) {
+			ret |= __get_user(ptr0[i^sw], addr + i);
+			ret |= __get_user(ptr1[i^sw], addr + i + 8);
+		} else {
+			ret |= __put_user(ptr0[i^sw], addr + i);
+			ret |= __put_user(ptr1[i^sw], addr + i + 8);
 		}
 	}
 	if (ret)

arch/powerpc/lib/copyuser_64.S

@@ -62,18 +62,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 72:	std	r8,8(r3)
 	beq+	3f
 	addi	r3,r3,16
-23:	ld	r9,8(r4)
 .Ldo_tail:
 	bf	cr7*4+1,1f
-	rotldi	r9,r9,32
+23:	lwz	r9,8(r4)
+	addi	r4,r4,4
 73:	stw	r9,0(r3)
 	addi	r3,r3,4
 1:	bf	cr7*4+2,2f
-	rotldi	r9,r9,16
+44:	lhz	r9,8(r4)
+	addi	r4,r4,2
 74:	sth	r9,0(r3)
 	addi	r3,r3,2
 2:	bf	cr7*4+3,3f
-	rotldi	r9,r9,8
+45:	lbz	r9,8(r4)
 75:	stb	r9,0(r3)
 3:	li	r3,0
 	blr
@@ -141,11 +142,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 6:	cmpwi	cr1,r5,8
 	addi	r3,r3,32
 	sld	r9,r9,r10
-	ble	cr1,.Ldo_tail
+	ble	cr1,7f
 34:	ld	r0,8(r4)
 	srd	r7,r0,r11
 	or	r9,r7,r9
-	b	.Ldo_tail
+7:
+	bf	cr7*4+1,1f
+	rotldi	r9,r9,32
+94:	stw	r9,0(r3)
+	addi	r3,r3,4
+1:	bf	cr7*4+2,2f
+	rotldi	r9,r9,16
+95:	sth	r9,0(r3)
+	addi	r3,r3,2
+2:	bf	cr7*4+3,3f
+	rotldi	r9,r9,8
+96:	stb	r9,0(r3)
+3:	li	r3,0
+	blr
 
 .Ldst_unaligned:
 	PPC_MTOCRF	0x01,r6		/* put #bytes to 8B bdry into cr7 */
@@ -218,7 +232,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 121:
 132:
 	addi	r3,r3,8
-123:
 134:
 135:
 138:
@@ -226,6 +239,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 140:
 141:
 142:
+123:
+144:
+145:
 
 /*
  * here we have had a fault on a load and r3 points to the first
@@ -309,6 +325,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 187:
 188:
 189:	
+194:
+195:
+196:
 1:
 	ld	r6,-24(r1)
 	ld	r5,-8(r1)
@@ -329,7 +348,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 	.llong	72b,172b
 	.llong	23b,123b
 	.llong	73b,173b
+	.llong	44b,144b
 	.llong	74b,174b
+	.llong	45b,145b
 	.llong	75b,175b
 	.llong	24b,124b
 	.llong	25b,125b
@@ -347,6 +368,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 	.llong	79b,179b
 	.llong	80b,180b
 	.llong	34b,134b
+	.llong	94b,194b
+	.llong	95b,195b
+	.llong	96b,196b
 	.llong	35b,135b
 	.llong	81b,181b
 	.llong	36b,136b

arch/powerpc/lib/memcpy_64.S

@@ -53,18 +53,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 3:	std	r8,8(r3)
 	beq	3f
 	addi	r3,r3,16
-	ld	r9,8(r4)
 .Ldo_tail:
 	bf	cr7*4+1,1f
-	rotldi	r9,r9,32
+	lwz	r9,8(r4)
+	addi	r4,r4,4
 	stw	r9,0(r3)
 	addi	r3,r3,4
 1:	bf	cr7*4+2,2f
-	rotldi	r9,r9,16
+	lhz	r9,8(r4)
+	addi	r4,r4,2
 	sth	r9,0(r3)
 	addi	r3,r3,2
 2:	bf	cr7*4+3,3f
-	rotldi	r9,r9,8
+	lbz	r9,8(r4)
 	stb	r9,0(r3)
 3:	ld	r3,48(r1)	/* return dest pointer */
 	blr
@@ -133,11 +134,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 	cmpwi	cr1,r5,8
 	addi	r3,r3,32
 	sld	r9,r9,r10
-	ble	cr1,.Ldo_tail
+	ble	cr1,6f
 	ld	r0,8(r4)
 	srd	r7,r0,r11
 	or	r9,r7,r9
-	b	.Ldo_tail
+6:
+	bf	cr7*4+1,1f
+	rotldi	r9,r9,32
+	stw	r9,0(r3)
+	addi	r3,r3,4
+1:	bf	cr7*4+2,2f
+	rotldi	r9,r9,16
+	sth	r9,0(r3)
+	addi	r3,r3,2
+2:	bf	cr7*4+3,3f
+	rotldi	r9,r9,8
+	stb	r9,0(r3)
+3:	ld	r3,48(r1)	/* return dest pointer */
+	blr
 
 .Ldst_unaligned:
 	PPC_MTOCRF	0x01,r6		# put #bytes to 8B bdry into cr7

arch/powerpc/sysdev/ppc4xx_pci.c

@@ -204,6 +204,23 @@ static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller	*hose,
 {
 	u32 ma, pcila, pciha;
 
+	/* Hack warning ! The "old" PCI 2.x cell only let us configure the low
+	 * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit
+	 * address are actually hard wired to a value that appears to depend
+	 * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx.
+	 *
+	 * The trick here is we just crop those top bits and ignore them when
+	 * programming the chip. That means the device-tree has to be right
+	 * for the specific part used (we don't print a warning if it's wrong
+	 * but on the other hand, you'll crash quickly enough), but at least
+	 * this code should work whatever the hard coded value is
+	 */
+	plb_addr &= 0xffffffffull;
+
+	/* Note: Due to the above hack, the test below doesn't actually test
+	 * if you address is above 4G, but it tests that address and
+	 * (address + size) are both contained in the same 4G
+	 */
 	if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
 	    size < 0x1000 || (plb_addr & (size - 1)) != 0) {
 		printk(KERN_WARNING "%s: Resource out of range\n",

arch/sh/boards/board-ap325rxa.c

@@ -22,7 +22,6 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
-#include <media/ov772x.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
@@ -224,7 +223,6 @@ static void camera_power(int val)
 }
 
 #ifdef CONFIG_I2C
-/* support for the old ncm03j camera */
 static unsigned char camera_ncm03j_magic[] =
 {
 	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
@@ -245,23 +243,6 @@ static unsigned char camera_ncm03j_magic[] =
 	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
 };
 
-static int camera_probe(void)
-{
-	struct i2c_adapter *a = i2c_get_adapter(0);
-	struct i2c_msg msg;
-	int ret;
-
-	camera_power(1);
-	msg.addr = 0x6e;
-	msg.buf = camera_ncm03j_magic;
-	msg.len = 2;
-	msg.flags = 0;
-	ret = i2c_transfer(a, &msg, 1);
-	camera_power(0);
-
-	return ret;
-}
-
 static int camera_set_capture(struct soc_camera_platform_info *info,
 			      int enable)
 {
@@ -313,35 +294,8 @@ static struct platform_device camera_device = {
 		.platform_data	= &camera_info,
 	},
 };
-
-static int __init camera_setup(void)
-{
-	if (camera_probe() > 0)
-		platform_device_register(&camera_device);
-
-	return 0;
-}
-late_initcall(camera_setup);
-
 #endif /* CONFIG_I2C */
 
-static int ov7725_power(struct device *dev, int mode)
-{
-	camera_power(0);
-	if (mode)
-		camera_power(1);
-
-	return 0;
-}
-
-static struct ov772x_camera_info ov7725_info = {
-	.buswidth  = SOCAM_DATAWIDTH_8,
-	.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
-	.link = {
-		.power  = ov7725_power,
-	},
-};
-
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
 	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
@@ -392,6 +346,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 	&ap325rxa_nor_flash_device,
 	&lcdc_device,
 	&ceu_device,
+#ifdef CONFIG_I2C
+	&camera_device,
+#endif
 	&nand_flash_device,
 	&sdcard_cn3_device,
 };
@@ -400,10 +357,6 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
-	{
-		I2C_BOARD_INFO("ov772x", 0x21),
-		.platform_data = &ov7725_info,
-	},
 };
 
 static struct spi_board_info ap325rxa_spi_devices[] = {

arch/sh/kernel/cpu/sh2a/clock-sh7201.c

@@ -18,8 +18,8 @@
 #include <asm/freq.h>
 #include <asm/io.h>
 
-const static int pll1rate[]={1,2,3,4,6,8};
-const static int pfc_divisors[]={1,2,3,4,6,8,12};
+static const int pll1rate[]={1,2,3,4,6,8};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
 #if (CONFIG_SH_CLK_MD == 0)

arch/sparc/kernel/chmc.c

@@ -306,6 +306,7 @@ static int jbusmc_print_dimm(int syndrome_code,
 		buf[1] = '?';
 		buf[2] = '?';
 		buf[3] = '\0';
+		return 0;
 	}
 	p = dp->controller;
 	prop = &p->layout;

arch/x86/Kconfig

@@ -1803,7 +1803,7 @@ config DMAR
 	  remapping devices.
 
 config DMAR_DEFAULT_ON
-	def_bool n
+	def_bool y
 	prompt "Enable DMA Remapping Devices by default"
 	depends on DMAR
 	help

arch/x86/include/asm/iomap.h

@@ -23,6 +23,9 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
+int
+is_io_mapping_possible(resource_size_t base, unsigned long size);
+
 void *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 

arch/x86/kernel/cpu/intel.c

@@ -4,6 +4,7 @@
 #include <linux/string.h>
 #include <linux/bitops.h>
 #include <linux/smp.h>
+#include <linux/sched.h>
 #include <linux/thread_info.h>
 #include <linux/module.h>
 
@@ -56,11 +57,16 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 
 	/*
 	 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
-	 * with P/T states and does not stop in deep C-states
+	 * with P/T states and does not stop in deep C-states.
+	 *
+	 * It is also reliable across cores and sockets. (but not across
+	 * cabinets - we turn it off in that case explicitly.)
 	 */
 	if (c->x86_power & (1 << 8)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
+		set_cpu_cap(c, X86_FEATURE_TSC_RELIABLE);
+		sched_clock_stable = 1;
 	}
 
 }

arch/x86/mach-voyager/voyager_smp.c

@@ -65,7 +65,7 @@ static volatile unsigned long smp_invalidate_needed;
 
 /* Bitmask of CPUs present in the system - exported by i386_syms.c, used
  * by scheduler but indexed physically */
-cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+static cpumask_t voyager_phys_cpu_present_map = CPU_MASK_NONE;
 
 /* The internal functions */
 static void send_CPI(__u32 cpuset, __u8 cpi);
@@ -366,19 +366,19 @@ void __init find_smp_config(void)
 	/* set up everything for just this CPU, we can alter
 	 * this as we start the other CPUs later */
 	/* now get the CPU disposition from the extended CMOS */
-	cpus_addr(phys_cpu_present_map)[0] =
+	cpus_addr(voyager_phys_cpu_present_map)[0] =
 	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK);
-	cpus_addr(phys_cpu_present_map)[0] |=
+	cpus_addr(voyager_phys_cpu_present_map)[0] |=
 	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
-	cpus_addr(phys_cpu_present_map)[0] |=
+	cpus_addr(voyager_phys_cpu_present_map)[0] |=
 	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
 				       2) << 16;
-	cpus_addr(phys_cpu_present_map)[0] |=
+	cpus_addr(voyager_phys_cpu_present_map)[0] |=
 	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
 				       3) << 24;
-	init_cpu_possible(&phys_cpu_present_map);
-	printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
-	       cpus_addr(phys_cpu_present_map)[0]);
+	init_cpu_possible(&voyager_phys_cpu_present_map);
+	printk("VOYAGER SMP: voyager_phys_cpu_present_map = 0x%lx\n",
+	       cpus_addr(voyager_phys_cpu_present_map)[0]);
 	/* Here we set up the VIC to enable SMP */
 	/* enable the CPIs by writing the base vector to their register */
 	outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER);
@@ -628,15 +628,15 @@ void __init smp_boot_cpus(void)
 		/* now that the cat has probed the Voyager System Bus, sanity
 		 * check the cpu map */
 		if (((voyager_quad_processors | voyager_extended_vic_processors)
-		     & cpus_addr(phys_cpu_present_map)[0]) !=
-		    cpus_addr(phys_cpu_present_map)[0]) {
+		     & cpus_addr(voyager_phys_cpu_present_map)[0]) !=
+		    cpus_addr(voyager_phys_cpu_present_map)[0]) {
 			/* should panic */
 			printk("\n\n***WARNING*** "
 			       "Sanity check of CPU present map FAILED\n");
 		}
 	} else if (voyager_level == 4)
 		voyager_extended_vic_processors =
-		    cpus_addr(phys_cpu_present_map)[0];
+		    cpus_addr(voyager_phys_cpu_present_map)[0];
 
 	/* this sets up the idle task to run on the current cpu */
 	voyager_extended_cpus = 1;
@@ -670,7 +670,7 @@ void __init smp_boot_cpus(void)
 	/* loop over all the extended VIC CPUs and boot them.  The
 	 * Quad CPUs must be bootstrapped by their extended VIC cpu */
 	for (i = 0; i < nr_cpu_ids; i++) {
-		if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map))
+		if (i == boot_cpu_id || !cpu_isset(i, voyager_phys_cpu_present_map))
 			continue;
 		do_boot_cpu(i);
 		/* This udelay seems to be needed for the Quad boots

arch/x86/mm/iomap_32.c

@@ -20,6 +20,24 @@
 #include <asm/pat.h>
 #include <linux/module.h>
 
+#ifdef CONFIG_X86_PAE
+int
+is_io_mapping_possible(resource_size_t base, unsigned long size)
+{
+	return 1;
+}
+#else
+int
+is_io_mapping_possible(resource_size_t base, unsigned long size)
+{
+	/* There is no way to map greater than 1 << 32 address without PAE */
+	if (base + size > 0x100000000ULL)
+		return 0;
+
+	return 1;
+}
+#endif
+
 /* Map 'pfn' using fixed map 'type' and protections 'prot'
  */
 void *

arch/x86/xen/enlighten.c

@@ -1672,6 +1672,9 @@ asmlinkage void __init xen_start_kernel(void)
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
 
+	local_irq_disable();
+	early_boot_irqs_off();
+
 	xen_raw_console_write("mapping kernel into physical memory\n");
 	pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
 

block/blk-merge.c

@@ -38,72 +38,84 @@ void blk_recalc_rq_sectors(struct request *rq, int nsect)
 	}
 }
 
-void blk_recalc_rq_segments(struct request *rq)
+static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
+					     struct bio *bio,
+					     unsigned int *seg_size_ptr)
 {
-	int nr_phys_segs;
 	unsigned int phys_size;
 	struct bio_vec *bv, *bvprv = NULL;
-	int seg_size;
-	int cluster;
-	struct req_iterator iter;
-	int high, highprv = 1;
-	struct request_queue *q = rq->q;
+	int cluster, i, high, highprv = 1;
+	unsigned int seg_size, nr_phys_segs;
+	struct bio *fbio;
 
-	if (!rq->bio)
-		return;
+	if (!bio)
+		return 0;
 
+	fbio = bio;
 	cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
 	seg_size = 0;
 	phys_size = nr_phys_segs = 0;
-	rq_for_each_segment(bv, rq, iter) {
-		/*
-		 * the trick here is making sure that a high page is never
-		 * considered part of another segment, since that might
-		 * change with the bounce page.
-		 */
-		high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
-		if (high || highprv)
-			goto new_segment;
-		if (cluster) {
-			if (seg_size + bv->bv_len > q->max_segment_size)
-				goto new_segment;
-			if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
-				goto new_segment;
-			if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
+	for_each_bio(bio) {
+		bio_for_each_segment(bv, bio, i) {
+			/*
+			 * the trick here is making sure that a high page is
+			 * never considered part of another segment, since that
+			 * might change with the bounce page.
+			 */
+			high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
+			if (high || highprv)
 				goto new_segment;
+			if (cluster) {
+				if (seg_size + bv->bv_len > q->max_segment_size)
+					goto new_segment;
+				if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
+					goto new_segment;
+				if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
+					goto new_segment;
+
+				seg_size += bv->bv_len;
+				bvprv = bv;
+				continue;
+			}
+new_segment:
+			if (nr_phys_segs == 1 && seg_size >
+			    fbio->bi_seg_front_size)
+				fbio->bi_seg_front_size = seg_size;
 
-			seg_size += bv->bv_len;
+			nr_phys_segs++;
 			bvprv = bv;
-			continue;
+			seg_size = bv->bv_len;
+			highprv = high;
 		}
-new_segment:
-		if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
-			rq->bio->bi_seg_front_size = seg_size;
-
-		nr_phys_segs++;
-		bvprv = bv;
-		seg_size = bv->bv_len;
-		highprv = high;
 	}
 
-	if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
+	if (seg_size_ptr)
+		*seg_size_ptr = seg_size;
+
+	return nr_phys_segs;
+}
+
+void blk_recalc_rq_segments(struct request *rq)
+{
+	unsigned int seg_size = 0, phys_segs;
+
+	phys_segs = __blk_recalc_rq_segments(rq->q, rq->bio, &seg_size);
+
+	if (phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
 		rq->bio->bi_seg_front_size = seg_size;
 	if (seg_size > rq->biotail->bi_seg_back_size)
 		rq->biotail->bi_seg_back_size = seg_size;
 
-	rq->nr_phys_segments = nr_phys_segs;
+	rq->nr_phys_segments = phys_segs;
 }
 
 void blk_recount_segments(struct request_queue *q, struct bio *bio)
 {
-	struct request rq;
 	struct bio *nxt = bio->bi_next;
-	rq.q = q;
-	rq.bio = rq.biotail = bio;
+
 	bio->bi_next = NULL;
-	blk_recalc_rq_segments(&rq);
+	bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, NULL);
 	bio->bi_next = nxt;
-	bio->bi_phys_segments = rq.nr_phys_segments;
 	bio->bi_flags |= (1 << BIO_SEG_VALID);
 }
 EXPORT_SYMBOL(blk_recount_segments);

block/genhd.c

@@ -256,6 +256,22 @@ void blkdev_show(struct seq_file *seqf, off_t offset)
 }
 #endif /* CONFIG_PROC_FS */
 
+/**
+ * register_blkdev - register a new block device
+ *
+ * @major: the requested major device number [1..255]. If @major=0, try to
+ *         allocate any unused major number.
+ * @name: the name of the new block device as a zero terminated string
+ *
+ * The @name must be unique within the system.
+ *
+ * The return value depends on the @major input parameter.
+ *  - if a major device number was requested in range [1..255] then the
+ *    function returns zero on success, or a negative error code
+ *  - if any unused major number was requested with @major=0 parameter
+ *    then the return value is the allocated major number in range
+ *    [1..255] or a negative error code otherwise
+ */
 int register_blkdev(unsigned int major, const char *name)
 {
 	struct blk_major_name **n, *p;

drivers/ata/pata_amd.c

@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.11"
+#define DRV_VERSION "0.4.1"
 
 /**
  *	timing_setup		-	shared timing computation and load
@@ -145,6 +145,13 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline)
 	return ata_sff_prereset(link, deadline);
 }
 
+/**
+ *	amd_cable_detect	-	report cable type
+ *	@ap: port
+ *
+ *	AMD controller/BIOS setups record the cable type in word 0x42
+ */
+
 static int amd_cable_detect(struct ata_port *ap)
 {
 	static const u32 bitmask[2] = {0x03, 0x0C};
@@ -157,6 +164,40 @@ static int amd_cable_detect(struct ata_port *ap)
 	return ATA_CBL_PATA40;
 }
 
+/**
+ *	amd_fifo_setup		-	set the PIO FIFO for ATA/ATAPI
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Set the PCI fifo for this device according to the devices present
+ *	on the bus at this point in time. We need to turn the post write buffer
+ *	off for ATAPI devices as we may need to issue a word sized write to the
+ *	device as the final I/O
+ */
+
+static void amd_fifo_setup(struct ata_port *ap)
+{
+	struct ata_device *adev;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	static const u8 fifobit[2] = { 0xC0, 0x30};
+	u8 fifo = fifobit[ap->port_no];
+	u8 r;
+
+
+	ata_for_each_dev(adev, &ap->link, ENABLED) {
+		if (adev->class == ATA_DEV_ATAPI)
+			fifo = 0;
+	}
+	if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */
+		fifo = 0;
+
+	/* On the later chips the read prefetch bits become no-op bits */
+	pci_read_config_byte(pdev, 0x41, &r);
+	r &= ~fifobit[ap->port_no];
+	r |= fifo;
+	pci_write_config_byte(pdev, 0x41, r);
+}
+
 /**
  *	amd33_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -167,21 +208,25 @@ static int amd_cable_detect(struct ata_port *ap)
 
 static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
+	amd_fifo_setup(ap);
 	timing_setup(ap, adev, 0x40, adev->pio_mode, 1);
 }
 
 static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
+	amd_fifo_setup(ap);
 	timing_setup(ap, adev, 0x40, adev->pio_mode, 2);
 }
 
 static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
+	amd_fifo_setup(ap);
 	timing_setup(ap, adev, 0x40, adev->pio_mode, 3);
 }
 
 static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
+	amd_fifo_setup(ap);
 	timing_setup(ap, adev, 0x40, adev->pio_mode, 4);
 }
 
@@ -397,6 +442,16 @@ static struct ata_port_operations nv133_port_ops = {
 	.set_dmamode	= nv133_set_dmamode,
 };
 
+static void amd_clear_fifo(struct pci_dev *pdev)
+{
+	u8 fifo;
+	/* Disable the FIFO, the FIFO logic will re-enable it as
+	   appropriate */
+	pci_read_config_byte(pdev, 0x41, &fifo);
+	fifo &= 0x0F;
+	pci_write_config_byte(pdev, 0x41, fifo);
+}
+
 static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info[10] = {
@@ -503,14 +558,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	if (type < 3)
 		ata_pci_bmdma_clear_simplex(pdev);
-
-	/* Check for AMD7411 */
-	if (type == 3)
-		/* FIFO is broken */
-		pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
-	else
-		pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
-
+	if (pdev->vendor == PCI_VENDOR_ID_AMD)
+		amd_clear_fifo(pdev);
 	/* Cable detection on Nvidia chips doesn't work too well,
 	 * cache BIOS programmed UDMA mode.
 	 */
@@ -536,18 +585,11 @@ static int amd_reinit_one(struct pci_dev *pdev)
 		return rc;
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD) {
-		u8 fifo;
-		pci_read_config_byte(pdev, 0x41, &fifo);
-		if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
-			/* FIFO is broken */
-			pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
-		else
-			pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
+		amd_clear_fifo(pdev);
 		if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
 		    pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
 			ata_pci_bmdma_clear_simplex(pdev);
 	}
-
 	ata_host_resume(host);
 	return 0;
 }

drivers/ata/pata_it821x.c

@@ -557,6 +557,9 @@ static unsigned int it821x_read_id(struct ata_device *adev,
 		id[83] |= 0x4400;	/* Word 83 is valid and LBA48 */
 		id[86] |= 0x0400;	/* LBA48 on */
 		id[ATA_ID_MAJOR_VER] |= 0x1F;
+		/* Clear the serial number because it's different each boot
+		   which breaks validation on resume */
+		memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN);
 	}
 	return err_mask;
 }

drivers/ata/pata_legacy.c

@@ -283,9 +283,10 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
 static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
 			unsigned char *buf, unsigned int buflen, int rw)
 {
-	if (ata_id_has_dword_io(dev->id)) {
+	int slop = buflen & 3;
+	/* 32bit I/O capable *and* we need to write a whole number of dwords */
+	if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
 		struct ata_port *ap = dev->link->ap;
-		int slop = buflen & 3;
 		unsigned long flags;
 
 		local_irq_save(flags);
@@ -735,7 +736,7 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
 	struct ata_port *ap = adev->link->ap;
 	int slop = buflen & 3;
 
-	if (ata_id_has_dword_io(adev->id)) {
+	if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
 		if (rw == WRITE)
 			iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
 		else

drivers/ata/sata_mv.c

@@ -3114,19 +3114,17 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 		writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
 	}
 
-	if (!IS_SOC(hpriv)) {
-		/* Clear any currently outstanding host interrupt conditions */
-		writelfl(0, mmio + hpriv->irq_cause_ofs);
+	/* Clear any currently outstanding host interrupt conditions */
+	writelfl(0, mmio + hpriv->irq_cause_ofs);
 
-		/* and unmask interrupt generation for host regs */
-		writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
+	/* and unmask interrupt generation for host regs */
+	writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
 
-		/*
-		 * enable only global host interrupts for now.
-		 * The per-port interrupts get done later as ports are set up.
-		 */
-		mv_set_main_irq_mask(host, 0, PCI_ERR);
-	}
+	/*
+	 * enable only global host interrupts for now.
+	 * The per-port interrupts get done later as ports are set up.
+	 */
+	mv_set_main_irq_mask(host, 0, PCI_ERR);
 done:
 	return rc;
 }

drivers/block/cciss.c

@@ -3611,11 +3611,15 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 		schedule_timeout_uninterruptible(30*HZ);
 
 		/* Now try to get the controller to respond to a no-op */
-		for (i=0; i<12; i++) {
+		for (i=0; i<30; i++) {
 			if (cciss_noop(pdev) == 0)
 				break;
-			else
-				printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : ""));
+
+			schedule_timeout_uninterruptible(HZ);
+		}
+		if (i == 30) {
+			printk(KERN_ERR "cciss: controller seems dead\n");
+			return -EBUSY;
 		}
 	}
 

drivers/block/xen-blkfront.c

@@ -40,6 +40,7 @@
 #include <linux/hdreg.h>
 #include <linux/cdrom.h>
 #include <linux/module.h>
+#include <linux/scatterlist.h>
 
 #include <xen/xenbus.h>
 #include <xen/grant_table.h>
@@ -82,6 +83,7 @@ struct blkfront_info
 	enum blkif_state connected;
 	int ring_ref;
 	struct blkif_front_ring ring;
+	struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 	unsigned int evtchn, irq;
 	struct request_queue *rq;
 	struct work_struct work;
@@ -204,12 +206,11 @@ static int blkif_queue_request(struct request *req)
 	struct blkfront_info *info = req->rq_disk->private_data;
 	unsigned long buffer_mfn;
 	struct blkif_request *ring_req;
-	struct req_iterator iter;
-	struct bio_vec *bvec;
 	unsigned long id;
 	unsigned int fsect, lsect;
-	int ref;
+	int i, ref;
 	grant_ref_t gref_head;
+	struct scatterlist *sg;
 
 	if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
 		return 1;
@@ -238,12 +239,13 @@ static int blkif_queue_request(struct request *req)
 	if (blk_barrier_rq(req))
 		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
 
-	ring_req->nr_segments = 0;
-	rq_for_each_segment(bvec, req, iter) {
-		BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST);
-		buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page));
-		fsect = bvec->bv_offset >> 9;
-		lsect = fsect + (bvec->bv_len >> 9) - 1;
+	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
+	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
+	for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
+		buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
+		fsect = sg->offset >> 9;
+		lsect = fsect + (sg->length >> 9) - 1;
 		/* install a grant reference. */
 		ref = gnttab_claim_grant_reference(&gref_head);
 		BUG_ON(ref == -ENOSPC);
@@ -254,16 +256,12 @@ static int blkif_queue_request(struct request *req)
 				buffer_mfn,
 				rq_data_dir(req) );
 
-		info->shadow[id].frame[ring_req->nr_segments] =
-				mfn_to_pfn(buffer_mfn);
-
-		ring_req->seg[ring_req->nr_segments] =
+		info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
+		ring_req->seg[i] =
 				(struct blkif_request_segment) {
 					.gref       = ref,
 					.first_sect = fsect,
 					.last_sect  = lsect };
-
-		ring_req->nr_segments++;
 	}
 
 	info->ring.req_prod_pvt++;
@@ -622,6 +620,8 @@ static int setup_blkring(struct xenbus_device *dev,
 	SHARED_RING_INIT(sring);
 	FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE);
 
+	sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
 	err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
 	if (err < 0) {
 		free_page((unsigned long)sring);

drivers/gpu/drm/drm_crtc_helper.c

@@ -452,6 +452,59 @@ static void drm_setup_crtcs(struct drm_device *dev)
 	kfree(modes);
 	kfree(enabled);
 }
+
+/**
+ * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
+ * @encoder: encoder to test
+ * @crtc: crtc to test
+ *
+ * Return false if @encoder can't be driven by @crtc, true otherwise.
+ */
+static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
+				struct drm_crtc *crtc)
+{
+	struct drm_device *dev;
+	struct drm_crtc *tmp;
+	int crtc_mask = 1;
+
+	WARN(!crtc, "checking null crtc?");
+
+	dev = crtc->dev;
+
+	list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
+		if (tmp == crtc)
+			break;
+		crtc_mask <<= 1;
+	}
+
+	if (encoder->possible_crtcs & crtc_mask)
+		return true;
+	return false;
+}
+
+/*
+ * Check the CRTC we're going to map each output to vs. its current
+ * CRTC.  If they don't match, we have to disable the output and the CRTC
+ * since the driver will have to re-route things.
+ */
+static void
+drm_crtc_prepare_encoders(struct drm_device *dev)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs;
+	struct drm_encoder *encoder;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		encoder_funcs = encoder->helper_private;
+		/* Disable unused encoders */
+		if (encoder->crtc == NULL)
+			(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+		/* Disable encoders whose CRTC is about to change */
+		if (encoder_funcs->get_crtc &&
+		    encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
+			(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+	}
+}
+
 /**
  * drm_crtc_set_mode - set a mode
  * @crtc: CRTC to program
@@ -547,6 +600,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 		encoder_funcs->prepare(encoder);
 	}
 
+	drm_crtc_prepare_encoders(dev);
+
 	crtc_funcs->prepare(crtc);
 
 	/* Set up the DPLL and any encoders state that needs to adjust or depend
@@ -617,7 +672,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 	struct drm_device *dev;
 	struct drm_crtc **save_crtcs, *new_crtc;
 	struct drm_encoder **save_encoders, *new_encoder;
-	struct drm_framebuffer *old_fb;
+	struct drm_framebuffer *old_fb = NULL;
 	bool save_enabled;
 	bool mode_changed = false;
 	bool fb_changed = false;
@@ -668,9 +723,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 	 * and then just flip_or_move it */
 	if (set->crtc->fb != set->fb) {
 		/* If we have no fb then treat it as a full mode set */
-		if (set->crtc->fb == NULL)
+		if (set->crtc->fb == NULL) {
+			DRM_DEBUG("crtc has no fb, full mode set\n");
 			mode_changed = true;
-		else if ((set->fb->bits_per_pixel !=
+		} else if ((set->fb->bits_per_pixel !=
 			 set->crtc->fb->bits_per_pixel) ||
 			 set->fb->depth != set->crtc->fb->depth)
 			fb_changed = true;
@@ -682,7 +738,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 		fb_changed = true;
 
 	if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
-		DRM_DEBUG("modes are different\n");
+		DRM_DEBUG("modes are different, full mode set\n");
 		drm_mode_debug_printmodeline(&set->crtc->mode);
 		drm_mode_debug_printmodeline(set->mode);
 		mode_changed = true;
@@ -708,6 +764,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 		}
 
 		if (new_encoder != connector->encoder) {
+			DRM_DEBUG("encoder changed, full mode switch\n");
 			mode_changed = true;
 			connector->encoder = new_encoder;
 		}
@@ -734,10 +791,20 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 			if (set->connectors[ro] == connector)
 				new_crtc = set->crtc;
 		}
+
+		/* Make sure the new CRTC will work with the encoder */
+		if (new_crtc &&
+		    !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
+			ret = -EINVAL;
+			goto fail_set_mode;
+		}
 		if (new_crtc != connector->encoder->crtc) {
+			DRM_DEBUG("crtc changed, full mode switch\n");
 			mode_changed = true;
 			connector->encoder->crtc = new_crtc;
 		}
+		DRM_DEBUG("setting connector %d crtc to %p\n",
+			  connector->base.id, new_crtc);
 	}
 
 	/* mode_set_base is not a required function */
@@ -781,6 +848,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 
 fail_set_mode:
 	set->crtc->enabled = save_enabled;
+	set->crtc->fb = old_fb;
 	count = 0;
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		if (!connector->encoder)

drivers/gpu/drm/drm_edid.c

@@ -125,7 +125,7 @@ static bool edid_is_valid(struct edid *edid)
 		DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
 		goto bad;
 	}
-	if (edid->revision <= 0 || edid->revision > 3) {
+	if (edid->revision > 3) {
 		DRM_ERROR("EDID has minor version %d, which is not between 0-3\n", edid->revision);
 		goto bad;
 	}
@@ -320,10 +320,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
 
 	mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
-	mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) |
+	mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 4) |
 					      pt->vsync_offset_lo);
 	mode->vsync_end = mode->vsync_start +
-		((pt->vsync_pulse_width_hi << 8) |
+		((pt->vsync_pulse_width_hi << 4) |
 		 pt->vsync_pulse_width_lo);
 	mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
 

drivers/gpu/drm/drm_irq.c

@@ -435,6 +435,8 @@ EXPORT_SYMBOL(drm_vblank_get);
  */
 void drm_vblank_put(struct drm_device *dev, int crtc)
 {
+	BUG_ON (atomic_read (&dev->vblank_refcount[crtc]) == 0);
+
 	/* Last user schedules interrupt disable */
 	if (atomic_dec_and_test(&dev->vblank_refcount[crtc]))
 		mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ);
@@ -460,8 +462,9 @@ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
 	 * so that interrupts remain enabled in the interim.
 	 */
 	if (!dev->vblank_inmodeset[crtc]) {
-		dev->vblank_inmodeset[crtc] = 1;
-		drm_vblank_get(dev, crtc);
+		dev->vblank_inmodeset[crtc] = 0x1;
+		if (drm_vblank_get(dev, crtc) == 0)
+			dev->vblank_inmodeset[crtc] |= 0x2;
 	}
 }
 EXPORT_SYMBOL(drm_vblank_pre_modeset);
@@ -473,9 +476,12 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
 	if (dev->vblank_inmodeset[crtc]) {
 		spin_lock_irqsave(&dev->vbl_lock, irqflags);
 		dev->vblank_disable_allowed = 1;
-		dev->vblank_inmodeset[crtc] = 0;
 		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-		drm_vblank_put(dev, crtc);
+
+		if (dev->vblank_inmodeset[crtc] & 0x2)
+			drm_vblank_put(dev, crtc);
+
+		dev->vblank_inmodeset[crtc] = 0;
 	}
 }
 EXPORT_SYMBOL(drm_vblank_post_modeset);

drivers/gpu/drm/i915/i915_dma.c

@@ -811,7 +811,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 	dev_priv->hws_map.flags = 0;
 	dev_priv->hws_map.mtrr = 0;
 
-	drm_core_ioremap(&dev_priv->hws_map, dev);
+	drm_core_ioremap_wc(&dev_priv->hws_map, dev);
 	if (dev_priv->hws_map.handle == NULL) {
 		i915_dma_cleanup(dev);
 		dev_priv->status_gfx_addr = 0;
@@ -1090,6 +1090,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
         dev_priv->mm.gtt_mapping =
 		io_mapping_create_wc(dev->agp->base,
 				     dev->agp->agp_info.aper_size * 1024*1024);
+	if (dev_priv->mm.gtt_mapping == NULL) {
+		ret = -EIO;
+		goto out_rmmap;
+	}
+
 	/* Set up a WC MTRR for non-PAT systems.  This is more common than
 	 * one would think, because the kernel disables PAT on first
 	 * generation Core chips because WC PAT gets overridden by a UC
@@ -1122,7 +1127,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	if (!I915_NEED_GFX_HWS(dev)) {
 		ret = i915_init_phys_hws(dev);
 		if (ret != 0)
-			goto out_rmmap;
+			goto out_iomapfree;
 	}
 
 	/* On the 945G/GM, the chipset reports the MSI capability on the
@@ -1161,6 +1166,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	return 0;
 
+out_iomapfree:
+	io_mapping_free(dev_priv->mm.gtt_mapping);
 out_rmmap:
 	iounmap(dev_priv->regs);
 free_priv:

drivers/gpu/drm/i915/i915_gem.c

@@ -3548,7 +3548,7 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
 	user_data = (char __user *) (uintptr_t) args->data_ptr;
 	obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
 
-	DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size);
+	DRM_DEBUG("obj_addr %p, %lld\n", obj_addr, args->size);
 	ret = copy_from_user(obj_addr, user_data, args->size);
 	if (ret)
 		return -EFAULT;

drivers/gpu/drm/i915/intel_bios.c

@@ -111,6 +111,12 @@ parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
 	panel_fixed_mode->clock = dvo_timing->clock * 10;
 	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
 
+	/* Some VBTs have bogus h/vtotal values */
+	if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+		panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+	if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+		panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+
 	drm_mode_set_name(panel_fixed_mode);
 
 	dev_priv->vbt_mode = panel_fixed_mode;

drivers/gpu/drm/i915/intel_display.c

@@ -217,7 +217,7 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
     return false;
 }
 
-#define INTELPllInvalid(s)   do { DRM_DEBUG(s); return false; } while (0)
+#define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
 /**
  * Returns whether the given set of divisors are valid for a given refclk with
  * the given connectors.

drivers/ide/Kconfig

@@ -46,7 +46,7 @@ menuconfig IDE
 	  SMART parameters from disk drives.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ide.
+	  module will be called ide-core.ko.
 
 	  For further information, please read <file:Documentation/ide/ide.txt>.
 

drivers/ide/amd74xx.c

@@ -166,7 +166,7 @@ static unsigned int init_chipset_amd74xx(struct pci_dev *dev)
 	 * Check for broken FIFO support.
 	 */
 	if (dev->vendor == PCI_VENDOR_ID_AMD &&
-	    dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
+	    dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
 		t &= 0x0f;
 	else
 		t |= 0xf0;

drivers/ide/atiixp.c

@@ -52,7 +52,7 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 	unsigned long flags;
-	int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+	int timing_shift = (drive->dn ^ 1) * 8;
 	u32 pio_timing_data;
 	u16 pio_mode_data;
 
@@ -85,7 +85,7 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
 	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 	unsigned long flags;
-	int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+	int timing_shift = (drive->dn ^ 1) * 8;
 	u32 tmp32;
 	u16 tmp16;
 	u16 udma_ctl = 0;

drivers/ide/ide-cd.c

@@ -55,7 +55,7 @@
 
 static DEFINE_MUTEX(idecd_ref_mutex);
 
-static void ide_cd_release(struct kref *);
+static void ide_cd_release(struct device *);
 
 static struct cdrom_info *ide_cd_get(struct gendisk *disk)
 {
@@ -67,7 +67,7 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk)
 		if (ide_device_get(cd->drive))
 			cd = NULL;
 		else
-			kref_get(&cd->kref);
+			get_device(&cd->dev);
 
 	}
 	mutex_unlock(&idecd_ref_mutex);
@@ -79,7 +79,7 @@ static void ide_cd_put(struct cdrom_info *cd)
 	ide_drive_t *drive = cd->drive;
 
 	mutex_lock(&idecd_ref_mutex);
-	kref_put(&cd->kref, ide_cd_release);
+	put_device(&cd->dev);
 	ide_device_put(drive);
 	mutex_unlock(&idecd_ref_mutex);
 }
@@ -194,6 +194,14 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
 			bio_sectors = max(bio_sectors(failed_command->bio), 4U);
 			sector &= ~(bio_sectors - 1);
 
+			/*
+			 * The SCSI specification allows for the value
+			 * returned by READ CAPACITY to be up to 75 2K
+			 * sectors past the last readable block.
+			 * Therefore, if we hit a medium error within the
+			 * last 75 2K sectors, we decrease the saved size
+			 * value.
+			 */
 			if (sector < get_capacity(info->disk) &&
 			    drive->probed_capacity - sector < 4 * 75)
 				set_capacity(info->disk, sector);
@@ -1790,15 +1798,17 @@ static void ide_cd_remove(ide_drive_t *drive)
 	ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
 
 	ide_proc_unregister_driver(drive, info->driver);
-
+	device_del(&info->dev);
 	del_gendisk(info->disk);
 
-	ide_cd_put(info);
+	mutex_lock(&idecd_ref_mutex);
+	put_device(&info->dev);
+	mutex_unlock(&idecd_ref_mutex);
 }
 
-static void ide_cd_release(struct kref *kref)
+static void ide_cd_release(struct device *dev)
 {
-	struct cdrom_info *info = to_ide_drv(kref, cdrom_info);
+	struct cdrom_info *info = to_ide_drv(dev, cdrom_info);
 	struct cdrom_device_info *devinfo = &info->devinfo;
 	ide_drive_t *drive = info->drive;
 	struct gendisk *g = info->disk;
@@ -1997,7 +2007,12 @@ static int ide_cd_probe(ide_drive_t *drive)
 
 	ide_init_disk(g, drive);
 
-	kref_init(&info->kref);
+	info->dev.parent = &drive->gendev;
+	info->dev.release = ide_cd_release;
+	dev_set_name(&info->dev, dev_name(&drive->gendev));
+
+	if (device_register(&info->dev))
+		goto out_free_disk;
 
 	info->drive = drive;
 	info->driver = &ide_cdrom_driver;
@@ -2011,7 +2026,7 @@ static int ide_cd_probe(ide_drive_t *drive)
 	g->driverfs_dev = &drive->gendev;
 	g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
 	if (ide_cdrom_setup(drive)) {
-		ide_cd_release(&info->kref);
+		put_device(&info->dev);
 		goto failed;
 	}
 
@@ -2021,6 +2036,8 @@ static int ide_cd_probe(ide_drive_t *drive)
 	add_disk(g);
 	return 0;
 
+out_free_disk:
+	put_disk(g);
 out_free_cd:
 	kfree(info);
 failed:

drivers/ide/ide-cd.h

@@ -80,7 +80,7 @@ struct cdrom_info {
 	ide_drive_t		*drive;
 	struct ide_driver	*driver;
 	struct gendisk		*disk;
-	struct kref		kref;
+	struct device		dev;
 
 	/* Buffer for table of contents.  NULL if we haven't allocated
 	   a TOC buffer for this device yet. */

drivers/ide/ide-gd.c

@@ -25,7 +25,7 @@ module_param(debug_mask, ulong, 0644);
 
 static DEFINE_MUTEX(ide_disk_ref_mutex);
 
-static void ide_disk_release(struct kref *);
+static void ide_disk_release(struct device *);
 
 static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
 {
@@ -37,7 +37,7 @@ static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
 		if (ide_device_get(idkp->drive))
 			idkp = NULL;
 		else
-			kref_get(&idkp->kref);
+			get_device(&idkp->dev);
 	}
 	mutex_unlock(&ide_disk_ref_mutex);
 	return idkp;
@@ -48,7 +48,7 @@ static void ide_disk_put(struct ide_disk_obj *idkp)
 	ide_drive_t *drive = idkp->drive;
 
 	mutex_lock(&ide_disk_ref_mutex);
-	kref_put(&idkp->kref, ide_disk_release);
+	put_device(&idkp->dev);
 	ide_device_put(drive);
 	mutex_unlock(&ide_disk_ref_mutex);
 }
@@ -66,17 +66,18 @@ static void ide_gd_remove(ide_drive_t *drive)
 	struct gendisk *g = idkp->disk;
 
 	ide_proc_unregister_driver(drive, idkp->driver);
-
+	device_del(&idkp->dev);
 	del_gendisk(g);
-
 	drive->disk_ops->flush(drive);
 
-	ide_disk_put(idkp);
+	mutex_lock(&ide_disk_ref_mutex);
+	put_device(&idkp->dev);
+	mutex_unlock(&ide_disk_ref_mutex);
 }
 
-static void ide_disk_release(struct kref *kref)
+static void ide_disk_release(struct device *dev)
 {
-	struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj);
+	struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj);
 	ide_drive_t *drive = idkp->drive;
 	struct gendisk *g = idkp->disk;
 
@@ -348,7 +349,12 @@ static int ide_gd_probe(ide_drive_t *drive)
 
 	ide_init_disk(g, drive);
 
-	kref_init(&idkp->kref);
+	idkp->dev.parent = &drive->gendev;
+	idkp->dev.release = ide_disk_release;
+	dev_set_name(&idkp->dev, dev_name(&drive->gendev));
+
+	if (device_register(&idkp->dev))
+		goto out_free_disk;
 
 	idkp->drive = drive;
 	idkp->driver = &ide_gd_driver;
@@ -373,6 +379,8 @@ static int ide_gd_probe(ide_drive_t *drive)
 	add_disk(g);
 	return 0;
 
+out_free_disk:
+	put_disk(g);
 out_free_idkp:
 	kfree(idkp);
 failed:

drivers/ide/ide-gd.h

@@ -17,7 +17,7 @@ struct ide_disk_obj {
 	ide_drive_t		*drive;
 	struct ide_driver	*driver;
 	struct gendisk		*disk;
-	struct kref		kref;
+	struct device		dev;
 	unsigned int		openers;	/* protected by BKL for now */
 
 	/* Last failed packet command */

drivers/ide/ide-tape.c

@@ -169,7 +169,7 @@ typedef struct ide_tape_obj {
 	ide_drive_t		*drive;
 	struct ide_driver	*driver;
 	struct gendisk		*disk;
-	struct kref		kref;
+	struct device		dev;
 
 	/*
 	 *	failed_pc points to the last failed packet command, or contains
@@ -267,7 +267,7 @@ static DEFINE_MUTEX(idetape_ref_mutex);
 
 static struct class *idetape_sysfs_class;
 
-static void ide_tape_release(struct kref *);
+static void ide_tape_release(struct device *);
 
 static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
 {
@@ -279,7 +279,7 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
 		if (ide_device_get(tape->drive))
 			tape = NULL;
 		else
-			kref_get(&tape->kref);
+			get_device(&tape->dev);
 	}
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
@@ -290,7 +290,7 @@ static void ide_tape_put(struct ide_tape_obj *tape)
 	ide_drive_t *drive = tape->drive;
 
 	mutex_lock(&idetape_ref_mutex);
-	kref_put(&tape->kref, ide_tape_release);
+	put_device(&tape->dev);
 	ide_device_put(drive);
 	mutex_unlock(&idetape_ref_mutex);
 }
@@ -308,7 +308,7 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
 	mutex_lock(&idetape_ref_mutex);
 	tape = idetape_devs[i];
 	if (tape)
-		kref_get(&tape->kref);
+		get_device(&tape->dev);
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
 }
@@ -2256,15 +2256,17 @@ static void ide_tape_remove(ide_drive_t *drive)
 	idetape_tape_t *tape = drive->driver_data;
 
 	ide_proc_unregister_driver(drive, tape->driver);
-
+	device_del(&tape->dev);
 	ide_unregister_region(tape->disk);
 
-	ide_tape_put(tape);
+	mutex_lock(&idetape_ref_mutex);
+	put_device(&tape->dev);
+	mutex_unlock(&idetape_ref_mutex);
 }
 
-static void ide_tape_release(struct kref *kref)
+static void ide_tape_release(struct device *dev)
 {
-	struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj);
+	struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj);
 	ide_drive_t *drive = tape->drive;
 	struct gendisk *g = tape->disk;
 
@@ -2407,7 +2409,12 @@ static int ide_tape_probe(ide_drive_t *drive)
 
 	ide_init_disk(g, drive);
 
-	kref_init(&tape->kref);
+	tape->dev.parent = &drive->gendev;
+	tape->dev.release = ide_tape_release;
+	dev_set_name(&tape->dev, dev_name(&drive->gendev));
+
+	if (device_register(&tape->dev))
+		goto out_free_disk;
 
 	tape->drive = drive;
 	tape->driver = &idetape_driver;
@@ -2436,6 +2443,8 @@ static int ide_tape_probe(ide_drive_t *drive)
 
 	return 0;
 
+out_free_disk:
+	put_disk(g);
 out_free_tape:
 	kfree(tape);
 failed:

drivers/ide/ide.c

@@ -337,6 +337,7 @@ static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp)
 	int a, b, i, j = 1;
 	unsigned int *dev_param_mask = (unsigned int *)kp->arg;
 
+	/* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
 	if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
 	    sscanf(s, "%d.%d", &a, &b) != 2)
 		return -EINVAL;
@@ -349,7 +350,7 @@ static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp)
 	if (j)
 		*dev_param_mask |= (1 << i);
 	else
-		*dev_param_mask &= (1 << i);
+		*dev_param_mask &= ~(1 << i);
 
 	return 0;
 }
@@ -392,6 +393,8 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp)
 {
 	int a, b, c = 0, h = 0, s = 0, i, j = 1;
 
+	/* controller . device (0 or 1) : Cylinders , Heads , Sectors */
+	/* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
 	if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
 	    sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
 		return -EINVAL;
@@ -407,7 +410,7 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp)
 	if (j)
 		ide_disks |= (1 << i);
 	else
-		ide_disks &= (1 << i);
+		ide_disks &= ~(1 << i);
 
 	ide_disks_chs[i].cyl  = c;
 	ide_disks_chs[i].head = h;
@@ -469,6 +472,8 @@ static int ide_set_ignore_cable(const char *s, struct kernel_param *kp)
 {
 	int i, j = 1;
 
+	/* controller (ignore) */
+	/* controller : 1 (ignore) | 0 (use) */
 	if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
 		return -EINVAL;
 
@@ -478,7 +483,7 @@ static int ide_set_ignore_cable(const char *s, struct kernel_param *kp)
 	if (j)
 		ide_ignore_cable |= (1 << i);
 	else
-		ide_ignore_cable &= (1 << i);
+		ide_ignore_cable &= ~(1 << i);
 
 	return 0;
 }

drivers/ide/it821x.c

@@ -5,9 +5,8 @@
  *  May be copied or modified under the terms of the GNU General Public License
  *  Based in part on the ITE vendor provided SCSI driver.
  *
- *  Documentation available from
- * 	http://www.ite.com.tw/pc/IT8212F_V04.pdf
- *  Some other documents are NDA.
+ *  Documentation:
+ *	Datasheet is freely available, some other documents under NDA.
  *
  *  The ITE8212 isn't exactly a standard IDE controller. It has two
  *  modes. In pass through mode then it is an IDE controller. In its smart

drivers/ieee1394/ieee1394_core.c

@@ -1275,7 +1275,7 @@ static void __exit ieee1394_cleanup(void)
 	unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
 }
 
-module_init(ieee1394_init);
+fs_initcall(ieee1394_init);
 module_exit(ieee1394_cleanup);
 
 /* Exported symbols */

drivers/md/raid1.c

@@ -1237,8 +1237,9 @@ static void end_sync_write(struct bio *bio, int error)
 	update_head_pos(mirror, r1_bio);
 
 	if (atomic_dec_and_test(&r1_bio->remaining)) {
-		md_done_sync(mddev, r1_bio->sectors, uptodate);
+		sector_t s = r1_bio->sectors;
 		put_buf(r1_bio);
+		md_done_sync(mddev, s, uptodate);
 	}
 }
 

drivers/md/raid10.c

@@ -1236,6 +1236,7 @@ static void end_sync_read(struct bio *bio, int error)
 	/* for reconstruct, we always reschedule after a read.
 	 * for resync, only after all reads
 	 */
+	rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
 	if (test_bit(R10BIO_IsRecover, &r10_bio->state) ||
 	    atomic_dec_and_test(&r10_bio->remaining)) {
 		/* we have read all the blocks,
@@ -1243,7 +1244,6 @@ static void end_sync_read(struct bio *bio, int error)
 		 */
 		reschedule_retry(r10_bio);
 	}
-	rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
 }
 
 static void end_sync_write(struct bio *bio, int error)
@@ -1264,11 +1264,13 @@ static void end_sync_write(struct bio *bio, int error)
 
 	update_head_pos(i, r10_bio);
 
+	rdev_dec_pending(conf->mirrors[d].rdev, mddev);
 	while (atomic_dec_and_test(&r10_bio->remaining)) {
 		if (r10_bio->master_bio == NULL) {
 			/* the primary of several recovery bios */
-			md_done_sync(mddev, r10_bio->sectors, 1);
+			sector_t s = r10_bio->sectors;
 			put_buf(r10_bio);
+			md_done_sync(mddev, s, 1);
 			break;
 		} else {
 			r10bio_t *r10_bio2 = (r10bio_t *)r10_bio->master_bio;
@@ -1276,7 +1278,6 @@ static void end_sync_write(struct bio *bio, int error)
 			r10_bio = r10_bio2;
 		}
 	}
-	rdev_dec_pending(conf->mirrors[d].rdev, mddev);
 }
 
 /*
@@ -1749,8 +1750,6 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 	if (!go_faster && conf->nr_waiting)
 		msleep_interruptible(1000);
 
-	bitmap_cond_end_sync(mddev->bitmap, sector_nr);
-
 	/* Again, very different code for resync and recovery.
 	 * Both must result in an r10bio with a list of bios that
 	 * have bi_end_io, bi_sector, bi_bdev set,
@@ -1886,6 +1885,8 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 		/* resync. Schedule a read for every block at this virt offset */
 		int count = 0;
 
+		bitmap_cond_end_sync(mddev->bitmap, sector_nr);
+
 		if (!bitmap_start_sync(mddev->bitmap, sector_nr,
 				       &sync_blocks, mddev->degraded) &&
 		    !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
@@ -2010,13 +2011,13 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
 	/* There is nowhere to write, so all non-sync
 	 * drives must be failed, so try the next chunk...
 	 */
-	{
-	sector_t sec = max_sector - sector_nr;
-	sectors_skipped += sec;
+	if (sector_nr + max_sync < max_sector)
+		max_sector = sector_nr + max_sync;
+
+	sectors_skipped += (max_sector - sector_nr);
 	chunks_skipped ++;
 	sector_nr = max_sector;
 	goto skipped;
-	}
 }
 
 static int run(mddev_t *mddev)

drivers/media/dvb/b2c2/flexcop-hw-filter.c

@@ -192,6 +192,7 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d
 
 	return 0;
 }
+EXPORT_SYMBOL(flexcop_pid_feed_control);
 
 void flexcop_hw_filter_init(struct flexcop_device *fc)
 {

drivers/media/dvb/b2c2/flexcop-pci.c

@@ -13,9 +13,9 @@ static int enable_pid_filtering = 1;
 module_param(enable_pid_filtering, int, 0444);
 MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
 
-static int irq_chk_intv;
+static int irq_chk_intv = 100;
 module_param(irq_chk_intv, int, 0644);
-MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging).");
+MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
 
 #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
 #define dprintk(level,args...) \
@@ -34,7 +34,9 @@ MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently jus
 
 static int debug;
 module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug,
+	"set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
+	 DEBSTATUS);
 
 #define DRIVER_VERSION "0.1"
 #define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
@@ -58,6 +60,8 @@ struct flexcop_pci {
 	int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
 	u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
 	int count;
+	int count_prev;
+	int stream_problem;
 
 	spinlock_t irq_lock;
 
@@ -103,18 +107,32 @@ static void flexcop_pci_irq_check_work(struct work_struct *work)
 		container_of(work, struct flexcop_pci, irq_check_work.work);
 	struct flexcop_device *fc = fc_pci->fc_dev;
 
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
-
-	flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4);
-
-	if (v.sram_dest_reg_714.net_ovflow_error)
-		deb_chk("sram net_ovflow_error\n");
-	if (v.sram_dest_reg_714.media_ovflow_error)
-		deb_chk("sram media_ovflow_error\n");
-	if (v.sram_dest_reg_714.cai_ovflow_error)
-		deb_chk("sram cai_ovflow_error\n");
-	if (v.sram_dest_reg_714.cai_ovflow_error)
-		deb_chk("sram cai_ovflow_error\n");
+	if (fc->feedcount) {
+
+		if (fc_pci->count == fc_pci->count_prev) {
+			deb_chk("no IRQ since the last check\n");
+			if (fc_pci->stream_problem++ == 3) {
+				struct dvb_demux_feed *feed;
+
+				spin_lock_irq(&fc->demux.lock);
+				list_for_each_entry(feed, &fc->demux.feed_list,
+					list_head) {
+					flexcop_pid_feed_control(fc, feed, 0);
+				}
+
+				list_for_each_entry(feed, &fc->demux.feed_list,
+					list_head) {
+					flexcop_pid_feed_control(fc, feed, 1);
+				}
+				spin_unlock_irq(&fc->demux.lock);
+
+				fc_pci->stream_problem = 0;
+			}
+		} else {
+			fc_pci->stream_problem = 0;
+			fc_pci->count_prev = fc_pci->count;
+		}
+	}
 
 	schedule_delayed_work(&fc_pci->irq_check_work,
 			msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
@@ -216,16 +234,12 @@ static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff)
 		flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
 		deb_irq("IRQ enabled\n");
 
+		fc_pci->count_prev = fc_pci->count;
+
 //		fc_pci->active_dma1_addr = 0;
 //		flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
 
-		if (irq_chk_intv > 0)
-			schedule_delayed_work(&fc_pci->irq_check_work,
-					msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
 	} else {
-		if (irq_chk_intv > 0)
-			cancel_delayed_work(&fc_pci->irq_check_work);
-
 		flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
 		deb_irq("IRQ disabled\n");
 
@@ -299,8 +313,6 @@ static int flexcop_pci_init(struct flexcop_pci *fc_pci)
 					IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
 		goto err_pci_iounmap;
 
-
-
 	fc_pci->init_state |= FC_PCI_INIT;
 	return ret;
 
@@ -375,6 +387,10 @@ static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
 
+		if (irq_chk_intv > 0)
+			schedule_delayed_work(&fc_pci->irq_check_work,
+		msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+
 	return ret;
 
 err_fc_exit:
@@ -393,6 +409,9 @@ static void flexcop_pci_remove(struct pci_dev *pdev)
 {
 	struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
 
+	if (irq_chk_intv > 0)
+		cancel_delayed_work(&fc_pci->irq_check_work);
+
 	flexcop_pci_dma_exit(fc_pci);
 	flexcop_device_exit(fc_pci->fc_dev);
 	flexcop_pci_exit(fc_pci);

drivers/media/dvb/b2c2/flexcop.c

@@ -212,8 +212,7 @@ void flexcop_reset_block_300(struct flexcop_device *fc)
 	v210.sw_reset_210.Block_reset_enable = 0xb2;
 
 	fc->write_ibi_reg(fc,sw_reset_210,v210);
-	msleep(1);
-
+	udelay(1000);
 	fc->write_ibi_reg(fc,ctrl_208,v208_save);
 }
 

drivers/media/video/em28xx/em28xx-audio.c

@@ -463,6 +463,8 @@ static int em28xx_audio_init(struct em28xx *dev)
 	pcm->info_flags = 0;
 	pcm->private_data = dev;
 	strcpy(pcm->name, "Empia 28xx Capture");
+
+	snd_card_set_dev(card, &dev->udev->dev);
 	strcpy(card->driver, "Empia Em28xx Audio");
 	strcpy(card->shortname, "Em28xx Audio");
 	strcpy(card->longname, "Empia Em28xx Audio");

drivers/media/video/pxa_camera.c

@@ -1155,23 +1155,23 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	const struct soc_camera_data_format *host_fmt, *cam_fmt = NULL;
-	const struct soc_camera_format_xlate *xlate;
+	const struct soc_camera_data_format *cam_fmt = NULL;
+	const struct soc_camera_format_xlate *xlate = NULL;
 	struct soc_camera_sense sense = {
 		.master_clock = pcdev->mclk,
 		.pixel_clock_max = pcdev->ciclk / 4,
 	};
-	int ret, buswidth;
+	int ret;
 
-	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
-	if (!xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
-		return -EINVAL;
-	}
+	if (pixfmt) {
+		xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+		if (!xlate) {
+			dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+			return -EINVAL;
+		}
 
-	buswidth = xlate->buswidth;
-	host_fmt = xlate->host_fmt;
-	cam_fmt = xlate->cam_fmt;
+		cam_fmt = xlate->cam_fmt;
+	}
 
 	/* If PCLK is used to latch data from the sensor, check sense */
 	if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
@@ -1201,8 +1201,8 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 	}
 
 	if (pixfmt && !ret) {
-		icd->buswidth = buswidth;
-		icd->current_fmt = host_fmt;
+		icd->buswidth = xlate->buswidth;
+		icd->current_fmt = xlate->host_fmt;
 	}
 
 	return ret;

drivers/media/video/sh_mobile_ceu_camera.c

@@ -603,21 +603,18 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 	const struct soc_camera_format_xlate *xlate;
 	int ret;
 
+	if (!pixfmt)
+		return icd->ops->set_fmt(icd, pixfmt, rect);
+
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
 		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
-	switch (pixfmt) {
-	case 0:				/* Only geometry change */
-		ret = icd->ops->set_fmt(icd, pixfmt, rect);
-		break;
-	default:
-		ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
-	}
+	ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
 
-	if (pixfmt && !ret) {
+	if (!ret) {
 		icd->buswidth = xlate->buswidth;
 		icd->current_fmt = xlate->host_fmt;
 		pcdev->camera_fmt = xlate->cam_fmt;

drivers/misc/hpilo.c

@@ -710,6 +710,7 @@ out:
 
 static struct pci_device_id ilo_devices[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB204) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3307) },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, ilo_devices);
@@ -758,7 +759,7 @@ static void __exit ilo_exit(void)
 	class_destroy(ilo_class);
 }
 
-MODULE_VERSION("0.06");
+MODULE_VERSION("1.0");
 MODULE_ALIAS(ILO_NAME);
 MODULE_DESCRIPTION(ILO_NAME);
 MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");

drivers/mtd/chips/map_rom.c

@@ -19,6 +19,7 @@ static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 static void maprom_nop (struct mtd_info *);
 static struct mtd_info *map_rom_probe(struct map_info *map);
+static int maprom_erase (struct mtd_info *mtd, struct erase_info *info);
 
 static struct mtd_chip_driver maprom_chipdrv = {
 	.probe	= map_rom_probe,
@@ -42,6 +43,7 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
 	mtd->read = maprom_read;
 	mtd->write = maprom_write;
 	mtd->sync = maprom_nop;
+	mtd->erase = maprom_erase;
 	mtd->flags = MTD_CAP_ROM;
 	mtd->erasesize = map->size;
 	mtd->writesize = 1;
@@ -71,6 +73,12 @@ static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *re
 	return -EIO;
 }
 
+static int maprom_erase (struct mtd_info *mtd, struct erase_info *info)
+{
+	/* We do our best 8) */
+	return -EROFS;
+}
+
 static int __init map_rom_init(void)
 {
 	register_mtd_chip_driver(&maprom_chipdrv);

drivers/mtd/devices/slram.c

@@ -267,22 +267,28 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength)
 	if (*(szlength) != '+') {
 		devlength = simple_strtoul(szlength, &buffer, 0);
 		devlength = handle_unit(devlength, buffer) - devstart;
+		if (devlength < devstart)
+			goto err_out;
+
+		devlength -= devstart;
 	} else {
 		devlength = simple_strtoul(szlength + 1, &buffer, 0);
 		devlength = handle_unit(devlength, buffer);
 	}
 	T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
 			devname, devstart, devlength);
-	if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) {
-		E("slram: Illegal start / length parameter.\n");
-		return(-EINVAL);
-	}
+	if (devlength % SLRAM_BLK_SZ != 0)
+		goto err_out;
 
 	if ((devstart = register_device(devname, devstart, devlength))){
 		unregister_devices();
 		return((int)devstart);
 	}
 	return(0);
+
+err_out:
+	E("slram: Illegal length parameter.\n");
+	return(-EINVAL);
 }
 
 #ifndef MODULE

drivers/mtd/lpddr/Kconfig

@@ -12,6 +12,7 @@ config MTD_LPDDR
 	  DDR memories, intended for battery-operated systems.
 
 config MTD_QINFO_PROBE
+	depends on MTD_LPDDR
 	tristate "Detect flash chips by QINFO probe"
 	help
 	    Device Information for LPDDR chips is offered through the Overlay

drivers/mtd/maps/Kconfig

@@ -491,7 +491,7 @@ config MTD_PCMCIA_ANONYMOUS
 
 config MTD_BFIN_ASYNC
 	tristate "Blackfin BF533-STAMP Flash Chip Support"
-	depends on BFIN533_STAMP && MTD_CFI
+	depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS
 	select MTD_PARTITIONS
 	default y
 	help

drivers/mtd/maps/bfin-async-flash.c

@@ -152,14 +152,18 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev)
 
 	if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
 		pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+		kfree(state);
 		return -EBUSY;
 	}
 	gpio_direction_output(state->enet_flash_pin, 1);
 
 	pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
 	state->mtd = do_map_probe(memory->name, &state->map);
-	if (!state->mtd)
+	if (!state->mtd) {
+		gpio_free(state->enet_flash_pin);
+		kfree(state);
 		return -ENXIO;
+	}
 
 #ifdef CONFIG_MTD_PARTITIONS
 	ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);

drivers/mtd/maps/ck804xrom.c

@@ -342,9 +342,9 @@ static struct pci_device_id ck804xrom_pci_tbl[] = {
 	{ 0, }
 };
 
+#if 0
 MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl);
 
-#if 0
 static struct pci_driver ck804xrom_driver = {
 	.name =		MOD_NAME,
 	.id_table =	ck804xrom_pci_tbl,

drivers/mtd/maps/physmap.c

@@ -29,6 +29,7 @@ struct physmap_flash_info {
 	struct map_info		map[MAX_RESOURCES];
 #ifdef CONFIG_MTD_PARTITIONS
 	int			nr_parts;
+	struct mtd_partition	*parts;
 #endif
 };
 
@@ -45,25 +46,26 @@ static int physmap_flash_remove(struct platform_device *dev)
 
 	physmap_data = dev->dev.platform_data;
 
-#ifdef CONFIG_MTD_CONCAT
-	if (info->cmtd != info->mtd[0]) {
+#ifdef CONFIG_MTD_PARTITIONS
+	if (info->nr_parts) {
+		del_mtd_partitions(info->cmtd);
+		kfree(info->parts);
+	} else if (physmap_data->nr_parts)
+		del_mtd_partitions(info->cmtd);
+	else
 		del_mtd_device(info->cmtd);
+#else
+	del_mtd_device(info->cmtd);
+#endif
+
+#ifdef CONFIG_MTD_CONCAT
+	if (info->cmtd != info->mtd[0])
 		mtd_concat_destroy(info->cmtd);
-	}
 #endif
 
 	for (i = 0; i < MAX_RESOURCES; i++) {
-		if (info->mtd[i] != NULL) {
-#ifdef CONFIG_MTD_PARTITIONS
-			if (info->nr_parts || physmap_data->nr_parts)
-				del_mtd_partitions(info->mtd[i]);
-			else
-				del_mtd_device(info->mtd[i]);
-#else
-			del_mtd_device(info->mtd[i]);
-#endif
+		if (info->mtd[i] != NULL)
 			map_destroy(info->mtd[i]);
-		}
 	}
 	return 0;
 }
@@ -86,9 +88,6 @@ static int physmap_flash_probe(struct platform_device *dev)
 	int err = 0;
 	int i;
 	int devices_found = 0;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts;
-#endif
 
 	physmap_data = dev->dev.platform_data;
 	if (physmap_data == NULL)
@@ -167,10 +166,11 @@ static int physmap_flash_probe(struct platform_device *dev)
 		goto err_out;
 
 #ifdef CONFIG_MTD_PARTITIONS
-	err = parse_mtd_partitions(info->cmtd, part_probe_types, &parts, 0);
+	err = parse_mtd_partitions(info->cmtd, part_probe_types,
+				&info->parts, 0);
 	if (err > 0) {
-		add_mtd_partitions(info->cmtd, parts, err);
-		kfree(parts);
+		add_mtd_partitions(info->cmtd, info->parts, err);
+		info->nr_parts = err;
 		return 0;
 	}
 

drivers/net/wireless/iwlwifi/iwl-tx.c

@@ -148,7 +148,7 @@ static void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 		pci_unmap_single(dev,
 				pci_unmap_addr(&txq->cmd[index]->meta, mapping),
 				pci_unmap_len(&txq->cmd[index]->meta, len),
-				PCI_DMA_TODEVICE);
+				PCI_DMA_BIDIRECTIONAL);
 
 	/* Unmap chunks, if any. */
 	for (i = 1; i < num_tbs; i++) {
@@ -964,7 +964,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	 * within command buffer array. */
 	txcmd_phys = pci_map_single(priv->pci_dev,
 				    out_cmd, sizeof(struct iwl_cmd),
-				    PCI_DMA_TODEVICE);
+				    PCI_DMA_BIDIRECTIONAL);
 	pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
 	pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
 	/* Add buffer containing Tx command and MAC(!) header to TFD's
@@ -1115,7 +1115,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 			IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
 
 	phys_addr = pci_map_single(priv->pci_dev, out_cmd,
-				   len, PCI_DMA_TODEVICE);
+				   len, PCI_DMA_BIDIRECTIONAL);
 	pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
 	pci_unmap_len_set(&out_cmd->meta, len, len);
 	phys_addr += offsetof(struct iwl_cmd, hdr);
@@ -1212,7 +1212,7 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id,
 	pci_unmap_single(priv->pci_dev,
 		pci_unmap_addr(&txq->cmd[cmd_idx]->meta, mapping),
 		pci_unmap_len(&txq->cmd[cmd_idx]->meta, len),
-		PCI_DMA_TODEVICE);
+		PCI_DMA_BIDIRECTIONAL);
 
 	for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
 	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {

drivers/pci/dmar.c

@@ -330,6 +330,14 @@ parse_dmar_table(void)
 	entry_header = (struct acpi_dmar_header *)(dmar + 1);
 	while (((unsigned long)entry_header) <
 			(((unsigned long)dmar) + dmar_tbl->length)) {
+		/* Avoid looping forever on bad ACPI tables */
+		if (entry_header->length == 0) {
+			printk(KERN_WARNING PREFIX
+				"Invalid 0-length structure\n");
+			ret = -EINVAL;
+			break;
+		}
+
 		dmar_table_print_dmar_entry(entry_header);
 
 		switch (entry_header->type) {
@@ -491,7 +499,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd)
 	int map_size;
 	u32 ver;
 	static int iommu_allocated = 0;
-	int agaw;
+	int agaw = 0;
 
 	iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
 	if (!iommu)
@@ -507,6 +515,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd)
 	iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
 	iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
 
+#ifdef CONFIG_DMAR
 	agaw = iommu_calculate_agaw(iommu);
 	if (agaw < 0) {
 		printk(KERN_ERR
@@ -514,6 +523,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd)
 			iommu->seq_id);
 		goto error;
 	}
+#endif
 	iommu->agaw = agaw;
 
 	/* the registers might be more than one page */
@@ -571,19 +581,49 @@ static inline void reclaim_free_desc(struct q_inval *qi)
 	}
 }
 
+static int qi_check_fault(struct intel_iommu *iommu, int index)
+{
+	u32 fault;
+	int head;
+	struct q_inval *qi = iommu->qi;
+	int wait_index = (index + 1) % QI_LENGTH;
+
+	fault = readl(iommu->reg + DMAR_FSTS_REG);
+
+	/*
+	 * If IQE happens, the head points to the descriptor associated
+	 * with the error. No new descriptors are fetched until the IQE
+	 * is cleared.
+	 */
+	if (fault & DMA_FSTS_IQE) {
+		head = readl(iommu->reg + DMAR_IQH_REG);
+		if ((head >> 4) == index) {
+			memcpy(&qi->desc[index], &qi->desc[wait_index],
+					sizeof(struct qi_desc));
+			__iommu_flush_cache(iommu, &qi->desc[index],
+					sizeof(struct qi_desc));
+			writel(DMA_FSTS_IQE, iommu->reg + DMAR_FSTS_REG);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * Submit the queued invalidation descriptor to the remapping
  * hardware unit and wait for its completion.
  */
-void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
+int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
 {
+	int rc = 0;
 	struct q_inval *qi = iommu->qi;
 	struct qi_desc *hw, wait_desc;
 	int wait_index, index;
 	unsigned long flags;
 
 	if (!qi)
-		return;
+		return 0;
 
 	hw = qi->desc;
 
@@ -601,7 +641,8 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
 
 	hw[index] = *desc;
 
-	wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
+	wait_desc.low = QI_IWD_STATUS_DATA(QI_DONE) |
+			QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
 	wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]);
 
 	hw[wait_index] = wait_desc;
@@ -612,13 +653,11 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
 	qi->free_head = (qi->free_head + 2) % QI_LENGTH;
 	qi->free_cnt -= 2;
 
-	spin_lock(&iommu->register_lock);
 	/*
 	 * update the HW tail register indicating the presence of
 	 * new descriptors.
 	 */
 	writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
-	spin_unlock(&iommu->register_lock);
 
 	while (qi->desc_status[wait_index] != QI_DONE) {
 		/*
@@ -628,15 +667,21 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
 		 * a deadlock where the interrupt context can wait indefinitely
 		 * for free slots in the queue.
 		 */
+		rc = qi_check_fault(iommu, index);
+		if (rc)
+			goto out;
+
 		spin_unlock(&qi->q_lock);
 		cpu_relax();
 		spin_lock(&qi->q_lock);
 	}
-
-	qi->desc_status[index] = QI_DONE;
+out:
+	qi->desc_status[index] = qi->desc_status[wait_index] = QI_DONE;
 
 	reclaim_free_desc(qi);
 	spin_unlock_irqrestore(&qi->q_lock, flags);
+
+	return rc;
 }
 
 /*
@@ -649,13 +694,13 @@ void qi_global_iec(struct intel_iommu *iommu)
 	desc.low = QI_IEC_TYPE;
 	desc.high = 0;
 
+	/* should never fail */
 	qi_submit_sync(&desc, iommu);
 }
 
 int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
 		     u64 type, int non_present_entry_flush)
 {
-
 	struct qi_desc desc;
 
 	if (non_present_entry_flush) {
@@ -669,10 +714,7 @@ int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
 			| QI_CC_GRAN(type) | QI_CC_TYPE;
 	desc.high = 0;
 
-	qi_submit_sync(&desc, iommu);
-
-	return 0;
-
+	return qi_submit_sync(&desc, iommu);
 }
 
 int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
@@ -702,10 +744,7 @@ int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
 	desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih)
 		| QI_IOTLB_AM(size_order);
 
-	qi_submit_sync(&desc, iommu);
-
-	return 0;
-
+	return qi_submit_sync(&desc, iommu);
 }
 
 /*

drivers/pci/hotplug/pciehp.h

@@ -111,6 +111,7 @@ struct controller {
 	int cmd_busy;
 	unsigned int no_cmd_complete:1;
 	unsigned int link_active_reporting:1;
+	unsigned int notification_enabled:1;
 };
 
 #define INT_BUTTON_IGNORE		0
@@ -170,6 +171,7 @@ extern int pciehp_configure_device(struct slot *p_slot);
 extern int pciehp_unconfigure_device(struct slot *p_slot);
 extern void pciehp_queue_pushbutton_work(struct work_struct *work);
 struct controller *pcie_init(struct pcie_device *dev);
+int pcie_init_notification(struct controller *ctrl);
 int pciehp_enable_slot(struct slot *p_slot);
 int pciehp_disable_slot(struct slot *p_slot);
 int pcie_enable_notification(struct controller *ctrl);

drivers/pci/hotplug/pciehp_core.c

@@ -434,6 +434,13 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
 		goto err_out_release_ctlr;
 	}
 
+	/* Enable events after we have setup the data structures */
+	rc = pcie_init_notification(ctrl);
+	if (rc) {
+		ctrl_err(ctrl, "Notification initialization failed\n");
+		goto err_out_release_ctlr;
+	}
+
 	/* Check if slot is occupied */
 	t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
 	t_slot->hpc_ops->get_adapter_status(t_slot, &value);

drivers/pci/hotplug/pciehp_hpc.c

@@ -934,7 +934,7 @@ static void pcie_disable_notification(struct controller *ctrl)
 		ctrl_warn(ctrl, "Cannot disable software notification\n");
 }
 
-static int pcie_init_notification(struct controller *ctrl)
+int pcie_init_notification(struct controller *ctrl)
 {
 	if (pciehp_request_irq(ctrl))
 		return -1;
@@ -942,13 +942,17 @@ static int pcie_init_notification(struct controller *ctrl)
 		pciehp_free_irq(ctrl);
 		return -1;
 	}
+	ctrl->notification_enabled = 1;
 	return 0;
 }
 
 static void pcie_shutdown_notification(struct controller *ctrl)
 {
-	pcie_disable_notification(ctrl);
-	pciehp_free_irq(ctrl);
+	if (ctrl->notification_enabled) {
+		pcie_disable_notification(ctrl);
+		pciehp_free_irq(ctrl);
+		ctrl->notification_enabled = 0;
+	}
 }
 
 static int pcie_init_slot(struct controller *ctrl)
@@ -1110,13 +1114,8 @@ struct controller *pcie_init(struct pcie_device *dev)
 	if (pcie_init_slot(ctrl))
 		goto abort_ctrl;
 
-	if (pcie_init_notification(ctrl))
-		goto abort_slot;
-
 	return ctrl;
 
-abort_slot:
-	pcie_cleanup_slot(ctrl);
 abort_ctrl:
 	kfree(ctrl);
 abort:

drivers/pci/intr_remapping.c

@@ -207,7 +207,7 @@ int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
 	return index;
 }
 
-static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
+static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
 {
 	struct qi_desc desc;
 
@@ -215,7 +215,7 @@ static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
 		   | QI_IEC_SELECTIVE;
 	desc.high = 0;
 
-	qi_submit_sync(&desc, iommu);
+	return qi_submit_sync(&desc, iommu);
 }
 
 int map_irq_to_irte_handle(int irq, u16 *sub_handle)
@@ -283,6 +283,7 @@ int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index)
 
 int modify_irte(int irq, struct irte *irte_modified)
 {
+	int rc;
 	int index;
 	struct irte *irte;
 	struct intel_iommu *iommu;
@@ -303,14 +304,15 @@ int modify_irte(int irq, struct irte *irte_modified)
 	set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1));
 	__iommu_flush_cache(iommu, irte, sizeof(*irte));
 
-	qi_flush_iec(iommu, index, 0);
-
+	rc = qi_flush_iec(iommu, index, 0);
 	spin_unlock(&irq_2_ir_lock);
-	return 0;
+
+	return rc;
 }
 
 int flush_irte(int irq)
 {
+	int rc;
 	int index;
 	struct intel_iommu *iommu;
 	struct irq_2_iommu *irq_iommu;
@@ -326,10 +328,10 @@ int flush_irte(int irq)
 
 	index = irq_iommu->irte_index + irq_iommu->sub_handle;
 
-	qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+	rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
 	spin_unlock(&irq_2_ir_lock);
 
-	return 0;
+	return rc;
 }
 
 struct intel_iommu *map_ioapic_to_ir(int apic)
@@ -355,6 +357,7 @@ struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
 
 int free_irte(int irq)
 {
+	int rc = 0;
 	int index, i;
 	struct irte *irte;
 	struct intel_iommu *iommu;
@@ -375,7 +378,7 @@ int free_irte(int irq)
 	if (!irq_iommu->sub_handle) {
 		for (i = 0; i < (1 << irq_iommu->irte_mask); i++)
 			set_64bit((unsigned long *)irte, 0);
-		qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+		rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
 	}
 
 	irq_iommu->iommu = NULL;
@@ -385,7 +388,7 @@ int free_irte(int irq)
 
 	spin_unlock(&irq_2_ir_lock);
 
-	return 0;
+	return rc;
 }
 
 static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)

drivers/pci/pcie/aer/aerdrv_core.c

@@ -108,6 +108,34 @@ int pci_cleanup_aer_correct_error_status(struct pci_dev *dev)
 }
 #endif  /*  0  */
 
+
+static void set_device_error_reporting(struct pci_dev *dev, void *data)
+{
+	bool enable = *((bool *)data);
+
+	if (dev->pcie_type != PCIE_RC_PORT &&
+	    dev->pcie_type != PCIE_SW_UPSTREAM_PORT &&
+	    dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT)
+		return;
+
+	if (enable)
+		pci_enable_pcie_error_reporting(dev);
+	else
+		pci_disable_pcie_error_reporting(dev);
+}
+
+/**
+ * set_downstream_devices_error_reporting - enable/disable the error reporting  bits on the root port and its downstream ports.
+ * @dev: pointer to root port's pci_dev data structure
+ * @enable: true = enable error reporting, false = disable error reporting.
+ */
+static void set_downstream_devices_error_reporting(struct pci_dev *dev,
+						   bool enable)
+{
+	set_device_error_reporting(dev, &enable);
+	pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
+}
+
 static int find_device_iter(struct device *device, void *data)
 {
 	struct pci_dev *dev;
@@ -525,15 +553,11 @@ void aer_enable_rootport(struct aer_rpc *rpc)
 	pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, &reg32);
 	pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32);
 
-	/* Enable Root Port device reporting error itself */
-	pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, &reg16);
-	reg16 = reg16 |
-		PCI_EXP_DEVCTL_CERE |
-		PCI_EXP_DEVCTL_NFERE |
-		PCI_EXP_DEVCTL_FERE |
-		PCI_EXP_DEVCTL_URRE;
-	pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL,
-		reg16);
+	/*
+	 * Enable error reporting for the root port device and downstream port
+	 * devices.
+	 */
+	set_downstream_devices_error_reporting(pdev, true);
 
 	/* Enable Root Port's interrupt in response to error messages */
 	pci_write_config_dword(pdev,
@@ -553,6 +577,12 @@ static void disable_root_aer(struct aer_rpc *rpc)
 	u32 reg32;
 	int pos;
 
+	/*
+	 * Disable error reporting for the root port device and downstream port
+	 * devices.
+	 */
+	set_downstream_devices_error_reporting(pdev, false);
+
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
 	/* Disable Root's interrupt in response to error messages */
 	pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0);

drivers/pci/pcie/portdrv_pci.c

@@ -97,8 +97,6 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev,
 
 	pcie_portdrv_save_config(dev);
 
-	pci_enable_pcie_error_reporting(dev);
-
 	return 0;
 }
 

drivers/pci/quirks.c

@@ -1584,6 +1584,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS,   PCI_DEVICE_ID_SERVERWORKS_
  */
 #define AMD_813X_MISC			0x40
 #define AMD_813X_NOIOAMODE		(1<<0)
+#define AMD_813X_REV_B2			0x13
 
 static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
 {
@@ -1591,6 +1592,8 @@ static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
 
 	if (noioapicquirk)
 		return;
+	if (dev->revision == AMD_813X_REV_B2)
+		return;
 
 	pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
 	pci_config_dword &= ~AMD_813X_NOIOAMODE;
@@ -1981,7 +1984,6 @@ static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
 			quirk_msi_ht_cap);
 
-
 /* The nVidia CK804 chipset may have 2 HT MSI mappings.
  * MSI are supported if the MSI capability set in any of these mappings.
  */
@@ -2032,6 +2034,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
 			 PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
 			 ht_enable_msi_mapping);
 
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
+			 ht_enable_msi_mapping);
+
 /* The P5N32-SLI Premium motherboard from Asus has a problem with msi
  * for the MCP55 NIC. It is not yet determined whether the msi problem
  * also affects other devices. As for now, turn off msi for this device.
@@ -2048,10 +2053,100 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
 			PCI_DEVICE_ID_NVIDIA_NVENET_15,
 			nvenet_msi_disable);
 
-static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
+static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
 {
 	struct pci_dev *host_bridge;
+	int pos;
+	int i, dev_no;
+	int found = 0;
+
+	dev_no = dev->devfn >> 3;
+	for (i = dev_no; i >= 0; i--) {
+		host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
+		if (!host_bridge)
+			continue;
+
+		pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+		if (pos != 0) {
+			found = 1;
+			break;
+		}
+		pci_dev_put(host_bridge);
+	}
+
+	if (!found)
+		return;
+
+	/* root did that ! */
+	if (msi_ht_cap_enabled(host_bridge))
+		goto out;
+
+	ht_enable_msi_mapping(dev);
+
+out:
+	pci_dev_put(host_bridge);
+}
+
+static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
+{
+	int pos, ttl = 48;
+
+	pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+	while (pos && ttl--) {
+		u8 flags;
+
+		if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+					 &flags) == 0) {
+			dev_info(&dev->dev, "Enabling HT MSI Mapping\n");
+
+			pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
+					      flags & ~HT_MSI_FLAGS_ENABLE);
+		}
+		pos = pci_find_next_ht_capability(dev, pos,
+						  HT_CAPTYPE_MSI_MAPPING);
+	}
+}
+
+static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
+{
 	int pos, ttl = 48;
+	int found = 0;
+
+	/* check if there is HT MSI cap or enabled on this device */
+	pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+	while (pos && ttl--) {
+		u8 flags;
+
+		if (found < 1)
+			found = 1;
+		if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+					 &flags) == 0) {
+			if (flags & HT_MSI_FLAGS_ENABLE) {
+				if (found < 2) {
+					found = 2;
+					break;
+				}
+			}
+		}
+		pos = pci_find_next_ht_capability(dev, pos,
+						  HT_CAPTYPE_MSI_MAPPING);
+	}
+
+	return found;
+}
+
+static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
+{
+	struct pci_dev *host_bridge;
+	int pos;
+	int found;
+
+	/* check if there is HT MSI cap or enabled on this device */
+	found = ht_check_msi_mapping(dev);
+
+	/* no HT MSI CAP */
+	if (found == 0)
+		return;
 
 	/*
 	 * HT MSI mapping should be disabled on devices that are below
@@ -2067,24 +2162,19 @@ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
 	pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
 	if (pos != 0) {
 		/* Host bridge is to HT */
-		ht_enable_msi_mapping(dev);
+		if (found == 1) {
+			/* it is not enabled, try to enable it */
+			nv_ht_enable_msi_mapping(dev);
+		}
 		return;
 	}
 
-	/* Host bridge is not to HT, disable HT MSI mapping on this device */
-	pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
-	while (pos && ttl--) {
-		u8 flags;
+	/* HT MSI is not enabled */
+	if (found == 1)
+		return;
 
-		if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
-					 &flags) == 0) {
-			dev_info(&dev->dev, "Disabling HT MSI mapping");
-			pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
-					      flags & ~HT_MSI_FLAGS_ENABLE);
-		}
-		pos = pci_find_next_ht_capability(dev, pos,
-						  HT_CAPTYPE_MSI_MAPPING);
-	}
+	/* Host bridge is not to HT, disable HT MSI mapping on this device */
+	ht_disable_msi_mapping(dev);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk);

drivers/serial/sh-sci.h

@@ -133,7 +133,7 @@
 # define SCSPTR3	0xffed0024	/* 16 bit SCIF */
 # define SCSPTR4	0xffee0024	/* 16 bit SCIF */
 # define SCSPTR5	0xffef0024	/* 16 bit SCIF */
-# define SCIF_OPER	0x0001		/* Overrun error bit */
+# define SCIF_ORER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
       defined(CONFIG_CPU_SUBTYPE_SH7203) || \

drivers/staging/panel/panel.c

@@ -2164,19 +2164,20 @@ static void __exit panel_cleanup_module(void)
 	if (scan_timer.function != NULL)
 		del_timer(&scan_timer);
 
-	if (keypad_enabled)
-		misc_deregister(&keypad_dev);
+	if (pprt != NULL) {
+		if (keypad_enabled)
+			misc_deregister(&keypad_dev);
+
+		if (lcd_enabled) {
+			panel_lcd_print("\x0cLCD driver " PANEL_VERSION
+					"\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
+			misc_deregister(&lcd_dev);
+		}
 
-	if (lcd_enabled) {
-		panel_lcd_print("\x0cLCD driver " PANEL_VERSION
-				"\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
-		misc_deregister(&lcd_dev);
+		/* TODO: free all input signals */
+		parport_release(pprt);
+		parport_unregister_device(pprt);
 	}
-
-	/* TODO: free all input signals */
-
-	parport_release(pprt);
-	parport_unregister_device(pprt);
 	parport_unregister_driver(&panel_driver);
 }
 

drivers/staging/rtl8187se/Kconfig

@@ -1,5 +1,6 @@
 config RTL8187SE
 	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
 	depends on PCI
+	depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
 	default N
 	---help---

drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c

@@ -234,20 +234,21 @@ out:
 void ieee80211_crypto_deinit(void)
 {
 	struct list_head *ptr, *n;
+	struct ieee80211_crypto_alg *alg = NULL;
 
 	if (hcrypt == NULL)
 		return;
 
-	for (ptr = hcrypt->algs.next, n = ptr->next; ptr != &hcrypt->algs;
-	     ptr = n, n = ptr->next) {
-		struct ieee80211_crypto_alg *alg =
-			(struct ieee80211_crypto_alg *) ptr;
-		list_del(ptr);
-		printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
-		       "'%s' (deinit)\n", alg->ops->name);
-		kfree(alg);
+	list_for_each_safe(ptr, n, &hcrypt->algs) {
+		alg = list_entry(ptr, struct ieee80211_crypto_alg, list);
+		if (alg) {
+			list_del(ptr);
+			printk(KERN_DEBUG
+			       "ieee80211_crypt: unregistered algorithm '%s' (deinit)\n",
+			       alg->ops->name);
+			kfree(alg);
+		}
 	}
-
 	kfree(hcrypt);
 }
 

drivers/staging/rtl8187se/r8180_core.c

@@ -6161,10 +6161,10 @@ static void __exit rtl8180_pci_module_exit(void)
 {
 	pci_unregister_driver (&rtl8180_pci_driver);
 	rtl8180_proc_module_remove();
-	ieee80211_crypto_deinit();
 	ieee80211_crypto_tkip_exit();
 	ieee80211_crypto_ccmp_exit();
 	ieee80211_crypto_wep_exit();
+	ieee80211_crypto_deinit();
 	DMESG("Exiting");
 }
 

drivers/staging/winbond/wbusb.c

@@ -319,16 +319,18 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct wbsoft_priv *priv;
 	struct ieee80211_hw *dev;
-	int err;
+	int nr, err;
 
 	usb_get_dev(udev);
 
 	// 20060630.2 Check the device if it already be opened
-	err = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
-			      0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
-			      0x0, 0x400, &ltmp, 4, HZ*100 );
-	if (err)
+	nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
+			     0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
+			     0x0, 0x400, &ltmp, 4, HZ*100 );
+	if (nr < 0) {
+		err = nr;
 		goto error;
+	}
 
 	ltmp = cpu_to_le32(ltmp);
 	if (ltmp) {  // Is already initialized?
@@ -337,8 +339,10 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
 	}
 
 	dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
-	if (!dev)
+	if (!dev) {
+		err = -ENOMEM;
 		goto error;
+	}
 
 	priv = dev->priv;
 
@@ -369,9 +373,11 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
 	}
 
 	dev->extra_tx_headroom = 12;	/* FIXME */
-	dev->flags = 0;
+	dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 
 	dev->channel_change_time = 1000;
+	dev->max_signal = 100;
 	dev->queues = 1;
 
 	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz;

drivers/usb/class/cdc-acm.c

@@ -1376,6 +1376,15 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
+	},
+	{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
+	.driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
+					   data interface instead of
+					   communications interface.
+					   Maybe we should define a new
+					   quirk for this. */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,

drivers/usb/core/message.c

@@ -653,7 +653,7 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type,
 		if (result <= 0 && result != -ETIMEDOUT)
 			continue;
 		if (result > 1 && ((u8 *)buf)[1] != type) {
-			result = -EPROTO;
+			result = -ENODATA;
 			continue;
 		}
 		break;
@@ -696,8 +696,13 @@ static int usb_get_string(struct usb_device *dev, unsigned short langid,
 			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
 			(USB_DT_STRING << 8) + index, langid, buf, size,
 			USB_CTRL_GET_TIMEOUT);
-		if (!(result == 0 || result == -EPIPE))
-			break;
+		if (result == 0 || result == -EPIPE)
+			continue;
+		if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+			result = -ENODATA;
+			continue;
+		}
+		break;
 	}
 	return result;
 }

drivers/usb/gadget/Kconfig

@@ -191,6 +191,7 @@ config USB_GADGET_OMAP
 	boolean "OMAP USB Device Controller"
 	depends on ARCH_OMAP
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+	select USB_OTG_UTILS if ARCH_OMAP
 	help
 	   Many Texas Instruments OMAP processors have flexible full
 	   speed USB device controllers, with support for up to 30

drivers/usb/gadget/f_obex.c

@@ -366,9 +366,9 @@ obex_bind(struct usb_configuration *c, struct usb_function *f)
 		f->hs_descriptors = usb_copy_descriptors(hs_function);
 
 		obex->hs.obex_in = usb_find_endpoint(hs_function,
-				f->descriptors, &obex_hs_ep_in_desc);
+				f->hs_descriptors, &obex_hs_ep_in_desc);
 		obex->hs.obex_out = usb_find_endpoint(hs_function,
-				f->descriptors, &obex_hs_ep_out_desc);
+				f->hs_descriptors, &obex_hs_ep_out_desc);
 	}
 
 	/* Avoid letting this gadget enumerate until the userspace

drivers/usb/gadget/file_storage.c

@@ -3879,7 +3879,11 @@ static int __init check_parameters(struct fsg_dev *fsg)
 	mod_data.protocol_type = USB_SC_SCSI;
 	mod_data.protocol_name = "Transparent SCSI";
 
-	if (gadget_is_sh(fsg->gadget))
+	/* Some peripheral controllers are known not to be able to
+	 * halt bulk endpoints correctly.  If one of them is present,
+	 * disable stalls.
+	 */
+	if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget))
 		mod_data.can_stall = 0;
 
 	if (mod_data.release == 0xffff) {	// Parameter wasn't set

drivers/usb/gadget/fsl_usb2_udc.c

@@ -404,7 +404,10 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
 	}
 	if (zlt)
 		tmp |= EP_QUEUE_HEAD_ZLT_SEL;
+
 	p_QH->max_pkt_length = cpu_to_le32(tmp);
+	p_QH->next_dtd_ptr = 1;
+	p_QH->size_ioc_int_sts = 0;
 
 	return;
 }

drivers/usb/host/ehci-hcd.c

@@ -485,6 +485,7 @@ static int ehci_init(struct usb_hcd *hcd)
 	 * periodic_size can shrink by USBCMD update if hcc_params allows.
 	 */
 	ehci->periodic_size = DEFAULT_I_TDPS;
+	INIT_LIST_HEAD(&ehci->cached_itd_list);
 	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
 		return retval;
 
@@ -497,6 +498,7 @@ static int ehci_init(struct usb_hcd *hcd)
 
 	ehci->reclaim = NULL;
 	ehci->next_uframe = -1;
+	ehci->clock_frame = -1;
 
 	/*
 	 * dedicate a qh for the async ring head, since we couldn't unlink

drivers/usb/host/ehci-mem.c

@@ -128,6 +128,7 @@ static inline void qh_put (struct ehci_qh *qh)
 
 static void ehci_mem_cleanup (struct ehci_hcd *ehci)
 {
+	free_cached_itd_list(ehci);
 	if (ehci->async)
 		qh_put (ehci->async);
 	ehci->async = NULL;