Merge with rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

.gitignore

@@ -30,3 +30,5 @@ include/linux/autoconf.h
 include/linux/compile.h
 include/linux/version.h
 
+# stgit generated dirs
+patches-*

CREDITS

@@ -2813,6 +2813,8 @@ E: luca.risolia@studio.unibo.it
 P: 1024D/FCE635A4 88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4
 D: V4L driver for W996[87]CF JPEG USB Dual Mode Camera Chips
 D: V4L2 driver for SN9C10x PC Camera Controllers
+D: V4L2 driver for ET61X151 and ET61X251 PC Camera Controllers
+D: V4L2 driver for ZC0301 Image Processor and Control Chip
 S: Via Liberta' 41/A
 S: Osio Sotto, 24046, Bergamo
 S: Italy

Documentation/Changes

@@ -15,24 +15,6 @@ and therefore owes credit to the same people as that file (Jared Mauch,
 Axel Boldt, Alessandro Sigala, and countless other users all over the
 'net).
 
-The latest revision of this document, in various formats, can always
-be found at <http://cyberbuzz.gatech.edu/kaboom/linux/Changes-2.4/>.
-
-Feel free to translate this document.  If you do so, please send me a
-URL to your translation for inclusion in future revisions of this
-document.
-
-Smotrite file <http://oblom.rnc.ru/linux/kernel/Changes.ru>, yavlyaushisya
-russkim perevodom dannogo documenta.
-
-Visite <http://www2.adi.uam.es/~ender/tecnico/> para obtener la traducción
-al español de este documento en varios formatos.
-
-Eine deutsche Version dieser Datei finden Sie unter
-<http://www.stefan-winter.de/Changes-2.4.0.txt>.
-
-Chris Ricker (kaboom@gatech.edu or chris.ricker@genetics.utah.edu).
-
 Current Minimal Requirements
 ============================
 

Documentation/connector/connector.txt

@@ -69,10 +69,11 @@ Unregisters new callback with connector core.
 
 struct cb_id *id 		- unique connector's user identifier.
 
-void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
+int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
 
 Sends message to the specified groups.  It can be safely called from
-any context, but may silently fail under strong memory pressure.
+softirq context, but may silently fail under strong memory pressure.
+If there are no listeners for given group -ESRCH can be returned.
 
 struct cn_msg *			- message header(with attached data).
 u32 __group			- destination group.

Documentation/dvb/avermedia.txt

@@ -1,4 +1,3 @@
-
 HOWTO: Get An Avermedia DVB-T working under Linux
 	   ______________________________________________
 
@@ -137,11 +136,8 @@ Getting the card going
    To  power  up  the  card,  load  the  following modules in the
    following order:
 
-     * insmod dvb-core.o
-     * modprobe bttv.o
-     * insmod bt878.o
-     * insmod dvb-bt8xx.o
-     * insmod sp887x.o
+     * modprobe bttv (normally loaded automatically)
+     * modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)
 
    Insertion  of  these  modules  into  the  running  kernel will
    activate the appropriate DVB device nodes. It is then possible
@@ -302,4 +298,4 @@ Further Update
    Many  thanks to Nigel Pearson for the updates to this document
    since the recent revision of the driver.
 
-   January 29th 2004
+   February 14th 2006

Documentation/dvb/bt8xx.txt

@@ -1,118 +1,78 @@
-How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working
-==========================================================================
+How to get the bt8xx cards working
+==================================
 
-This class of cards has a bt878a as the PCI interface, and
-require the bttv driver.
+1) General information
+======================
 
-Please pay close attention to the warning about the bttv module
-options below for the DST card.
+This class of cards has a bt878a as the PCI interface, and require the bttv driver
+for accessing the i2c bus and the gpio pins of the bt8xx chipset.
+Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge:
 
-1) General informations
-=======================
-
-These drivers require the bttv driver to provide the means to access
-the i2c bus and the gpio pins of the bt8xx chipset.
-
-Because of this, you need to enable
-"Device drivers" => "Multimedia devices"
-  => "Video For Linux" => "BT848 Video For Linux"
-
-Furthermore you need to enable
-"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
-  => "DVB for Linux" "DVB Core Support" "BT8xx based PCI cards"
+Compiling kernel please enable:
+a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux"
+b.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
 
 2) Loading Modules
 ==================
 
-In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us, plus the common dvb-bt8xx device driver.
-The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst),
-FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded
-automatically by the dvb-bt8xx device driver.
-
-3a) Nebula / Pinnacle PCTV / FusionHDTV Lite
----------------------------------------------
-
-   $ modprobe bttv (normally bttv is being loaded automatically by kmod)
-   $ modprobe dvb-bt8xx
-
-(or just place dvb-bt8xx in /etc/modules for automatic loading)
-
-
-3b) TwinHan and Clones
---------------------------
+In default cases bttv is loaded automatically.
+To load the backend either place dvb-bt8xx in etc/modules, or apply manually:
 
-   $ modprobe bttv card=0x71
-   $ modprobe dvb-bt8xx
-   $ modprobe dst
+	$ modprobe dvb-bt8xx
 
-The value 0x71 will override the PCI type detection for dvb-bt8xx,
-which  is necessary for TwinHan cards. Omission of this parameter might result
-in a system lockup.
+All frontends will be loaded automatically.
+People running udev please see Documentation/dvb/udev.txt.
 
-If you're having an older card (blue color PCB) and card=0x71 locks up
-your machine, try using 0x68, too. If that does not work, ask on the
-mailing list.
+In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary:
 
-The DST module takes a couple of useful parameters.
+2a) Running TwinHan and Clones
+------------------------------
 
-verbose takes values 0 to 4. These values control the verbosity level,
-and can be used to debug also.
+	$ modprobe bttv card=113
+	$ modprobe dvb-bt8xx
+	$ modprobe dst
 
-verbose=0 means complete disabling of messages
-	1 only error messages are displayed
-	2 notifications are also displayed
-	3 informational messages are also displayed
-	4 debug setting
+Useful parameters for verbosity level and debugging the dst module:
 
-dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
-0x20 means it has a Conditional Access slot.
+verbose=0:		messages are disabled
+	1:		only error messages are displayed
+	2:		notifications are displayed
+	3:		other useful messages are displayed
+	4:		debug setting
+dst_addons=0:		card is a free to air (FTA) card only
+	   0x20:	card has a conditional access slot for scrambled channels
 
-The autodetected values are determined by the cards 'response string'
-which you can see in your logs e.g.
+The autodetected values are determined by the cards' "response string".
+In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI].
+For bug reports please send in a complete log with verbose=4 activated.
+Please also see Documentation/dvb/ci.txt.
 
-dst_get_device_id: Recognise [DSTMCI]
-
-If you need to sent in bug reports on the dst, please do send in a complete
-log with the verbose=4 module parameter. For general usage, the default setting
-of verbose=1 is ideal.
-
-
-4) Multiple cards
+2b) Running multiple cards
 --------------------------
 
-If you happen to be running multiple cards, it would be advisable to load
-the bttv module with the card id. This would help to solve any module loading
-problems that you might face.
-
-For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite
+Examples of card ID's:
 
-	$ modprobe bttv card=0x71 card=0x87
-
-Here the order of the card id is important and should be the same as that of the
-physical order of the cards. Here card=0x71 represents the Twinhan and clones
-and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be
-specified in decimal, rather than hex:
+Pinnacle PCTV Sat:		 94
+Nebula Electronics Digi TV:	104
+pcHDTV HD-2000 TV:		112
+Twinhan DST and clones:		113
+Avermedia AverTV DVB-T 771:	123
+Avermedia AverTV DVB-T 761:	124
+DViCO FusionHDTV DVB-T Lite:	128
+DViCO FusionHDTV 5 Lite:	135
 
+Notice: The order of the card ID should be uprising:
+Example:
 	$ modprobe bttv card=113 card=135
+	$ modprobe dvb-bt8xx
 
-Some examples of card-id's
-
-Pinnacle Sat		0x5e  (94)
-Nebula Digi TV		0x68  (104)
-PC HDTV			0x70  (112)
-Twinhan			0x71  (113)
-FusionHDTV DVB-T Lite	0x80  (128)
-FusionHDTV5 Lite	0x87  (135)
-
-For a full list of card-id's, see the V4L Documentation within the kernel
-source:  linux/Documentation/video4linux/CARDLIST.bttv
-
-If you have problems with this please do ask on the mailing list.
+For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
+In case of further problems send questions to the mailing list: www.linuxdvb.org.
 
---
 Authors: Richard Walker,
 	 Jamie Honan,
 	 Michael Hunold,
 	 Manu Abraham,
+	 Uwe Bugla,
 	 Michael Krufky

Documentation/dvb/get_dvb_firmware

@@ -21,8 +21,9 @@
 use File::Temp qw/ tempdir /;
 use IO::Handle;
 
-@components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t",
-		"dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
+@components = ( "sp8870", "sp887x", "tda10045", "tda10046",
+		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
+		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird");
 
 # Check args
@@ -126,6 +127,24 @@ sub tda10046 {
     $outfile;
 }
 
+sub tda10046lifeview {
+    my $sourcefile = "Drv_2.11.02.zip";
+    my $url = "http://www.lifeview.com.tw/drivers/pci_card/FlyDVB-T/$sourcefile";
+    my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
+    my $outfile = "dvb-fe-tda10046.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    extract("$tmpdir/LVHybrid.sys", 0x8b088, 24602, "$tmpdir/fwtmp");
+    verify("$tmpdir/fwtmp", $hash);
+    copy("$tmpdir/fwtmp", $outfile);
+
+    $outfile;
+}
+
 sub av7110 {
     my $sourcefile = "dvb-ttpci-01.fw-261d";
     my $url = "http://www.linuxtv.org/downloads/firmware/$sourcefile";

Documentation/dvb/readme.txt

@@ -20,11 +20,23 @@ http://linuxtv.org/downloads/
 
 What's inside this directory:
 
+"avermedia.txt"
+contains detailed information about the
+Avermedia DVB-T cards. See also "bt8xx.txt".
+
+"bt8xx.txt"
+contains detailed information about the
+various bt8xx based "budget" DVB cards.
+
 "cards.txt"
 contains a list of supported hardware.
 
+"ci.txt"
+contains detailed information about the
+CI module as part from TwinHan cards and Clones.
+
 "contributors.txt"
-is the who-is-who of DVB development
+is the who-is-who of DVB development.
 
 "faq.txt"
 contains frequently asked questions and their answers.
@@ -34,19 +46,17 @@ script to download and extract firmware for those devices
 that require it.
 
 "ttusb-dec.txt"
-contains detailed informations about the
+contains detailed information about the
 TT DEC2000/DEC3000 USB DVB hardware.
 
-"bt8xx.txt"
-contains detailed installation instructions for the
-various bt8xx based "budget" DVB cards
-(Nebula, Pinnacle PCTV, Twinhan DST)
-
-"README.dibusb"
-contains detailed information about adapters
-based on DiBcom reference design.
-
 "udev.txt"
 how to get DVB and udev up and running.
 
+"README.dvb-usb"
+contains detailed information about the DVB USB cards.
+
+"README.flexcop"
+contains detailed information about the
+Technisat- and Flexcop B2C2 drivers.
+
 Good luck and have fun!

Documentation/feature-removal-schedule.txt

@@ -196,3 +196,21 @@ Why:	Board specific code doesn't build anymore since ~2.6.0 and no
 	users have complained indicating there is no more need for these
 	boards.  This should really be considered a last call.
 Who:	Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
+
+What:	USB driver API moves to EXPORT_SYMBOL_GPL
+When:	Febuary 2008
+Files:	include/linux/usb.h, drivers/usb/core/driver.c
+Why:	The USB subsystem has changed a lot over time, and it has been
+	possible to create userspace USB drivers using usbfs/libusb/gadgetfs
+	that operate as fast as the USB bus allows.  Because of this, the USB
+	subsystem will not be allowing closed source kernel drivers to
+	register with it, after this grace period is over.  If anyone needs
+	any help in converting their closed source drivers over to use the
+	userspace filesystems, please contact the
+	linux-usb-devel@lists.sourceforge.net mailing list, and the developers
+	there will be glad to help you out.
+Who:	Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------

Documentation/networking/e100.txt

@@ -1,16 +1,17 @@
 Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
 ==============================================================
 
-November 17, 2004
-
+November 15, 2005
 
 Contents
 ========
 
 - In This Release
 - Identifying Your Adapter
+- Building and Installation
 - Driver Configuration Parameters
 - Additional Configurations
+- Known Issues
 - Support
 
 
@@ -18,18 +19,30 @@ In This Release
 ===============
 
 This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
-Adapters, version 3.3.x.  This driver supports 2.4.x and 2.6.x kernels. 
+Adapters. This driver includes support for Itanium(R)2-based systems.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel PRO/100 adapter.
+
+The following features are now available in supported kernels:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
 
 Identifying Your Adapter
 ========================
 
-For more information on how to identify your adapter, go to the Adapter & 
+For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
   http://support.intel.com/support/network/adapter/pro100/21397.htm
 
-For the latest Intel network drivers for Linux, refer to the following 
-website. In the search field, enter your adapter name or type, or use the 
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
 networking link on the left to search for your adapter:
 
   http://downloadfinder.intel.com/scripts-df/support_intel.asp
@@ -40,73 +53,75 @@ Driver Configuration Parameters
 The default value for each parameter is generally the recommended setting,
 unless otherwise noted.
 
-Rx Descriptors: Number of receive descriptors. A receive descriptor is a data 
-   structure that describes a receive buffer and its attributes to the network 
-   controller. The data in the descriptor is used by the controller to write 
-   data from the controller to host memory. In the 3.0.x driver the valid
-   range for this parameter is 64-256. The default value is 64. This parameter 
-   can be changed using the command 
- 
+Rx Descriptors: Number of receive descriptors. A receive descriptor is a data
+   structure that describes a receive buffer and its attributes to the network
+   controller. The data in the descriptor is used by the controller to write
+   data from the controller to host memory. In the 3.x.x driver the valid range
+   for this parameter is 64-256. The default value is 64. This parameter can be
+   changed using the command:
+
    ethtool -G eth? rx n, where n is the number of desired rx descriptors.
 
-Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a
-   data structure that describes a transmit buffer and its attributes to the
-   network controller. The data in the descriptor is used by the controller to 
-   read data from the host memory to the controller. In the 3.0.x driver the 
-   valid range for this parameter is 64-256. The default value is 64. This 
-   parameter can be changed using the command 
+Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data
+   structure that describes a transmit buffer and its attributes to the network
+   controller. The data in the descriptor is used by the controller to read
+   data from the host memory to the controller. In the 3.x.x driver the valid
+   range for this parameter is 64-256. The default value is 64. This parameter
+   can be changed using the command:
 
    ethtool -G eth? tx n, where n is the number of desired tx descriptors.
 
-Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by 
-   default. Ethtool can be used as follows to force speed/duplex. 
+Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
+   default. Ethtool can be used as follows to force speed/duplex.
 
    ethtool -s eth?  autoneg off speed {10|100} duplex {full|half}
 
    NOTE: setting the speed/duplex to incorrect values will cause the link to
    fail.
 
-Event Log Message Level:  The driver uses the message level flag to log events 
-   to syslog. The message level can be set at driver load time. It can also be 
-   set using the command
+Event Log Message Level:  The driver uses the message level flag to log events
+   to syslog. The message level can be set at driver load time. It can also be
+   set using the command:
 
    ethtool -s eth? msglvl n
 
+
 Additional Configurations
 =========================
 
   Configuring the Driver on Different Distributions
   -------------------------------------------------
 
-  Configuring a network driver to load properly when the system is started is 
-  distribution dependent. Typically, the configuration process involves adding 
-  an alias line to /etc/modules.conf as well as editing other system startup 
-  scripts and/or configuration files.  Many popular Linux distributions ship 
-  with tools to make these changes for you. To learn the proper way to 
-  configure a network device for your system, refer to your distribution 
-  documentation. If during this process you are asked for the driver or module 
-  name, the name for the Linux Base Driver for the Intel PRO/100 Family of 
-  Adapters is e100.
+  Configuring a network driver to load properly when the system is started is
+  distribution dependent. Typically, the configuration process involves adding
+  an alias line to /etc/modules.conf or /etc/modprobe.conf as well as editing
+  other system startup scripts and/or configuration files.  Many popular Linux
+  distributions ship with tools to make these changes for you. To learn the
+  proper way to configure a network device for your system, refer to your
+  distribution documentation.  If during this process you are asked for the
+  driver or module name, the name for the Linux Base Driver for the Intel
+  PRO/100 Family of Adapters is e100.
 
-  As an example, if you install the e100 driver for two PRO/100 adapters 
-  (eth0 and eth1), add the following to modules.conf:
+  As an example, if you install the e100 driver for two PRO/100 adapters
+  (eth0 and eth1), add the following to modules.conf or modprobe.conf:
 
        alias eth0 e100
        alias eth1 e100
 
   Viewing Link Messages
   ---------------------
-  In order to see link messages and other Intel driver information on your 
-  console, you must set the dmesg level up to six. This can be done by 
-  entering the following on the command line before loading the e100 driver: 
+  In order to see link messages and other Intel driver information on your
+  console, you must set the dmesg level up to six. This can be done by
+  entering the following on the command line before loading the e100 driver:
 
        dmesg -n 8
 
-  If you wish to see all messages issued by the driver, including debug 
+  If you wish to see all messages issued by the driver, including debug
   messages, set the dmesg level to eight.
 
   NOTE: This setting is not saved across reboots.
 
+
   Ethtool
   -------
 
@@ -114,29 +129,27 @@ Additional Configurations
   diagnostics, as well as displaying statistical information.  Ethtool
   version 1.6 or later is required for this functionality.
 
-  The latest release of ethtool can be found at:
-  http://sf.net/projects/gkernel.  
+  The latest release of ethtool can be found from
+  http://sourceforge.net/projects/gkernel.
 
-  NOTE: This driver uses mii support from the kernel. As a result, when 
-  there is no link, ethtool will report speed/duplex to be 10/half.
+  NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
+  for a more complete ethtool feature set can be enabled by upgrading
+  ethtool to ethtool-1.8.1.
 
-  NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support 
-  for a more complete ethtool feature set can be enabled by upgrading 
-  ethtool to ethtool-1.8.1. 
 
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is provided through the Ethtool* utility. Ethtool is included with Red 
-  Hat* 8.0. For other Linux distributions, download and install Ethtool from 
-  the following website: http://sourceforge.net/projects/gkernel. 
+  WoL is provided through the Ethtool* utility. Ethtool is included with Red
+  Hat* 8.0. For other Linux distributions, download and install Ethtool from
+  the following website: http://sourceforge.net/projects/gkernel.
 
-  For instructions on enabling WoL with Ethtool, refer to the Ethtool man
-  page.
+  For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
 
   WoL will be enabled on the system during the next shut down or reboot. For
-  this driver version, in order to enable WoL, the e100 driver must be 
+  this driver version, in order to enable WoL, the e100 driver must be
   loaded when shutting down or rebooting the system.
 
+
   NAPI
   ----
 
@@ -144,6 +157,25 @@ Additional Configurations
 
   See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
 
+  Multiple Interfaces on Same Ethernet Broadcast Network
+  ------------------------------------------------------
+
+  Due to the default ARP behavior on Linux, it is not possible to have
+  one system on two IP networks in the same Ethernet broadcast domain
+  (non-partitioned switch) behave as expected. All Ethernet interfaces
+  will respond to IP traffic for any IP address assigned to the system.
+  This results in unbalanced receive traffic.
+
+  If you have multiple interfaces in a server, either turn on ARP
+  filtering by
+
+  (1) entering: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+      (this only works if your kernel's version is higher than 2.4.5), or
+
+  (2) installing the interfaces in separate broadcast domains (either
+      in different switches or in a switch partitioned to VLANs).
+
+
 Support
 =======
 
@@ -151,20 +183,24 @@ For general information, go to the Intel support website at:
 
     http://support.intel.com
 
+    or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
 If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related to 
-the issue to linux.nics@intel.com.
+kernel with a supported adapter, email the specific information related to the
+issue to e1000-devel@lists.sourceforge.net.
 
 
 License
 =======
 
-This software program is released under the terms of a license agreement 
-between you ('Licensee') and Intel. Do not use or load this software or any 
-associated materials (collectively, the 'Software') until you have carefully 
-read the full terms and conditions of the LICENSE located in this software 
-package. By loading or using the Software, you agree to the terms of this 
-Agreement. If you do not agree with the terms of this Agreement, do not 
-install or use the Software.
+This software program is released under the terms of a license agreement
+between you ('Licensee') and Intel. Do not use or load this software or any
+associated materials (collectively, the 'Software') until you have carefully
+read the full terms and conditions of the file COPYING located in this software
+package. By loading or using the Software, you agree to the terms of this
+Agreement. If you do not agree with the terms of this Agreement, do not install
+or use the Software.
 
 * Other names and brands may be claimed as the property of others.

Documentation/networking/e1000.txt

@@ -1,7 +1,7 @@
 Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
 ===============================================================
 
-November 17, 2004
+November 15, 2005
 
 
 Contents
@@ -20,254 +20,316 @@ In This Release
 ===============
 
 This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters, version 5.x.x.  
+of Adapters.  This driver includes support for Itanium(R)2-based systems.
 
-For questions related to hardware requirements, refer to the documentation 
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed 
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel PRO/1000 adapter. All hardware requirements listed
 apply to use with Linux.
 
-Native VLANs are now available with supported kernels.
+The following features are now available in supported kernels:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
+The driver information previously displayed in the /proc filesystem is not
+supported in this release.  Alternatively, you can use ethtool (version 1.6
+or later), lspci, and ifconfig to obtain the same information.
+
+Instructions on updating ethtool can be found in the section "Additional
+Configurations" later in this document.
+
 
 Identifying Your Adapter
 ========================
 
-For more information on how to identify your adapter, go to the Adapter & 
+For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
     http://support.intel.com/support/network/adapter/pro100/21397.htm
 
-For the latest Intel network drivers for Linux, refer to the following 
-website. In the search field, enter your adapter name or type, or use the 
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
 networking link on the left to search for your adapter:
 
     http://downloadfinder.intel.com/scripts-df/support_intel.asp
 
-Command Line Parameters
-=======================
 
-If the driver is built as a module, the  following optional parameters are 
-used by entering them on the command line with the modprobe or insmod command
-using this syntax:
+Command Line Parameters =======================
+
+If the driver is built as a module, the  following optional parameters
+are used by entering them on the command line with the modprobe or insmod
+command using this syntax:
 
      modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
 
-     insmod e1000 [<option>=<VAL1>,<VAL2>,...] 
+     insmod e1000 [<option>=<VAL1>,<VAL2>,...]
 
 For example, with two PRO/1000 PCI adapters, entering:
 
      insmod e1000 TxDescriptors=80,128
 
-loads the e1000 driver with 80 TX descriptors for the first adapter and 128 TX 
-descriptors for the second adapter.
+loads the e1000 driver with 80 TX descriptors for the first adapter and 128
+TX descriptors for the second adapter.
 
 The default value for each parameter is generally the recommended setting,
-unless otherwise noted. Also, if the driver is statically built into the
-kernel, the driver is loaded with the default values for all the parameters.
-Ethtool can be used to change some of the parameters at runtime.
+unless otherwise noted.
+
+NOTES:  For more information about the AutoNeg, Duplex, and Speed
+        parameters, see the "Speed and Duplex Configuration" section in
+        this document.
 
-    NOTES: For more information about the AutoNeg, Duplex, and Speed
-           parameters, see the "Speed and Duplex Configuration" section in 
-           this document.
+        For more information about the InterruptThrottleRate,
+        RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+        parameters, see the application note at:
+        http://www.intel.com/design/network/applnots/ap450.htm
 
-           For more information about the InterruptThrottleRate, RxIntDelay, 
-           TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay parameters, see the 
-           application note at:
-           http://www.intel.com/design/network/applnots/ap450.htm
+        A descriptor describes a data buffer and attributes related to
+        the data buffer. This information is accessed by the hardware.
 
-           A descriptor describes a data buffer and attributes related to the 
-           data buffer. This information is accessed by the hardware.
 
-AutoNeg (adapters using copper connections only)
-Valid Range: 0x01-0x0F, 0x20-0x2F
+AutoNeg
+-------
+(Supported only on adapters with copper connections)
+Valid Range:   0x01-0x0F, 0x20-0x2F
 Default Value: 0x2F
-    This parameter is a bit mask that specifies which speed and duplex
-    settings the board advertises. When this parameter is used, the Speed and
-    Duplex parameters must not be specified.
-    NOTE: Refer to the Speed and Duplex section of this readme for more 
-          information on the AutoNeg parameter.  
-
-Duplex (adapters using copper connections only)
-Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
+
+This parameter is a bit mask that specifies which speed and duplex
+settings the board advertises. When this parameter is used, the Speed
+and Duplex parameters must not be specified.
+
+NOTE:  Refer to the Speed and Duplex section of this readme for more
+       information on the AutoNeg parameter.
+
+
+Duplex
+------
+(Supported only on adapters with copper connections)
+Valid Range:   0-2 (0=auto-negotiate, 1=half, 2=full)
 Default Value: 0
-    Defines the direction in which data is allowed to flow. Can be either one 
-    or two-directional. If both Duplex and the link partner are set to auto-
-    negotiate, the board auto-detects the correct duplex. If the link partner
-    is forced (either full or half), Duplex defaults to half-duplex.
+
+Defines the direction in which data is allowed to flow. Can be either
+one or two-directional. If both Duplex and the link partner are set to
+auto-negotiate, the board auto-detects the correct duplex. If the link
+partner is forced (either full or half), Duplex defaults to half-duplex.
+
 
 FlowControl
-Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
-Default: Read flow control settings from the EEPROM
-    This parameter controls the automatic generation(Tx) and response(Rx) to 
-    Ethernet PAUSE frames.
+----------
+Valid Range:   0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
+Default Value: Reads flow control settings from the EEPROM
+
+This parameter controls the automatic generation(Tx) and response(Rx)
+to Ethernet PAUSE frames.
+
 
 InterruptThrottleRate
-Valid Range: 100-100000 (0=off, 1=dynamic)
+---------------------
+(not supported on Intel 82542, 82543 or 82544-based adapters)
+Valid Range:   100-100000 (0=off, 1=dynamic)
 Default Value: 8000
-    This value represents the maximum number of interrupts per second the 
-    controller generates. InterruptThrottleRate is another setting used in 
-    interrupt moderation. Dynamic mode uses a heuristic algorithm to adjust 
-    InterruptThrottleRate based on the current traffic load.
-Un-supported Adapters: InterruptThrottleRate is NOT supported by 82542, 82543
-    or 82544-based adapters.
-
-    NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and 
-          RxAbsIntDelay parameters. In other words, minimizing the receive 
-          and/or transmit absolute delays does not force the controller to 
-          generate more interrupts than what the Interrupt Throttle Rate 
-          allows.
-    CAUTION: If you are using the Intel PRO/1000 CT Network Connection 
-             (controller 82547), setting InterruptThrottleRate to a value 
-             greater than 75,000, may hang (stop transmitting) adapters under 
-             certain network conditions. If this occurs a NETDEV WATCHDOG 
-             message is logged in the system event log. In addition, the 
-             controller is automatically reset, restoring the network 
-             connection. To eliminate the potential for the hang, ensure 
-             that InterruptThrottleRate is set no greater than 75,000 and is 
-             not set to 0.
-    NOTE: When e1000 is loaded with default settings and multiple adapters are 
-          in use simultaneously, the CPU utilization may increase non-linearly. 
-          In order to limit the CPU utilization without impacting the overall 
-          throughput, we recommend that you load the driver as follows:
-
-              insmod e1000.o InterruptThrottleRate=3000,3000,3000
-
-          This sets the InterruptThrottleRate to 3000 interrupts/sec for the 
-          first, second, and third instances of the driver. The range of 2000 to 
-          3000 interrupts per second works on a majority of systems and is a 
-          good starting point, but the optimal value will be platform-specific. 
-          If CPU utilization is not a concern, use RX_POLLING (NAPI) and default 
-          driver settings.
+
+This value represents the maximum number of interrupts per second the
+controller generates. InterruptThrottleRate is another setting used in
+interrupt moderation. Dynamic mode uses a heuristic algorithm to adjust
+InterruptThrottleRate based on the current traffic load.
+
+NOTE:  InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+       RxAbsIntDelay parameters. In other words, minimizing the receive
+       and/or transmit absolute delays does not force the controller to
+       generate more interrupts than what the Interrupt Throttle Rate
+       allows.
+
+CAUTION:  If you are using the Intel PRO/1000 CT Network Connection
+          (controller 82547), setting InterruptThrottleRate to a value
+          greater than 75,000, may hang (stop transmitting) adapters
+          under certain network conditions. If this occurs a NETDEV
+          WATCHDOG message is logged in the system event log. In
+          addition, the controller is automatically reset, restoring
+          the network connection. To eliminate the potential for the
+          hang, ensure that InterruptThrottleRate is set no greater
+          than 75,000 and is not set to 0.
+
+NOTE:  When e1000 is loaded with default settings and multiple adapters
+       are in use simultaneously, the CPU utilization may increase non-
+       linearly. In order to limit the CPU utilization without impacting
+       the overall throughput, we recommend that you load the driver as
+       follows:
+
+           insmod e1000.o InterruptThrottleRate=3000,3000,3000
+
+       This sets the InterruptThrottleRate to 3000 interrupts/sec for
+       the first, second, and third instances of the driver. The range
+       of 2000 to 3000 interrupts per second works on a majority of
+       systems and is a good starting point, but the optimal value will
+       be platform-specific. If CPU utilization is not a concern, use
+       RX_POLLING (NAPI) and default driver settings.
+
 
 RxDescriptors
-Valid Range: 80-256 for 82542 and 82543-based adapters
-             80-4096 for all other supported adapters
+-------------
+Valid Range:   80-256 for 82542 and 82543-based adapters
+               80-4096 for all other supported adapters
 Default Value: 256
-    This value is the number of receive descriptors allocated by the driver. 
-    Increasing this value allows the driver to buffer more incoming packets. 
-    Each descriptor is 16 bytes.  A receive buffer is allocated for each
-    descriptor and can either be 2048 or 4096 bytes long, depending on the MTU 
 
-    setting. An incoming packet can span one or more receive descriptors. 
-    The maximum MTU size is 16110.
+This value specifies the number of receive descriptors allocated by the
+driver. Increasing this value allows the driver to buffer more incoming
+packets.  Each descriptor is 16 bytes.  A receive buffer is also
+allocated for each descriptor and is 2048.
 
-    NOTE: MTU designates the frame size. It only needs to be set for Jumbo 
-          Frames.
-    NOTE: Depending on the available system resources, the request for a
-    higher number of receive descriptors may be denied.  In this case,
-    use a lower number.
 
 RxIntDelay
-Valid Range: 0-65535 (0=off)
+----------
+Valid Range:   0-65535 (0=off)
 Default Value: 0
-    This value delays the generation of receive interrupts in units of 1.024 
-    microseconds.  Receive interrupt reduction can improve CPU efficiency if 
-    properly tuned for specific network traffic. Increasing this value adds 
-    extra latency to frame reception and can end up decreasing the throughput 
-    of TCP traffic. If the system is reporting dropped receives, this value 
-    may be set too high, causing the driver to run out of available receive 
-    descriptors.
-
-    CAUTION: When setting RxIntDelay to a value other than 0, adapters may 
-             hang (stop transmitting) under certain network conditions. If 
-             this occurs a NETDEV WATCHDOG message is logged in the system
-             event log. In addition, the controller is automatically reset, 
-             restoring the network connection. To eliminate the potential for
-             the hang ensure that RxIntDelay is set to 0.
-
-RxAbsIntDelay (82540, 82545 and later adapters only)
-Valid Range: 0-65535 (0=off)
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds.  Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic. Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic. If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
+
+CAUTION:  When setting RxIntDelay to a value other than 0, adapters may
+          hang (stop transmitting) under certain network conditions. If
+          this occurs a NETDEV WATCHDOG message is logged in the system
+          event log. In addition, the controller is automatically reset,
+          restoring the network connection. To eliminate the potential
+          for the hang ensure that RxIntDelay is set to 0.
+
+
+RxAbsIntDelay
+-------------
+(This parameter is supported only on 82540, 82545 and later adapters.)
+Valid Range:   0-65535 (0=off)
 Default Value: 128
-    This value, in units of 1.024 microseconds, limits the delay in which a 
-    receive interrupt is generated. Useful only if RxIntDelay is non-zero, 
-    this value ensures that an interrupt is generated after the initial 
-    packet is received within the set amount of time.  Proper tuning,
-    along with RxIntDelay, may improve traffic throughput in specific network
-    conditions.
-
-Speed (adapters using copper connections only)
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated. Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time.  Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+
+Speed
+-----
+(This parameter is supported only on adapters with copper connections.)
 Valid Settings: 0, 10, 100, 1000
-Default Value: 0 (auto-negotiate at all supported speeds)
-    Speed forces the line speed to the specified value in megabits per second
-    (Mbps). If this parameter is not specified or is set to 0 and the link 
-    partner is set to auto-negotiate, the board will auto-detect the correct 
-    speed. Duplex should also be set when Speed is set to either 10 or 100.
+Default Value:  0 (auto-negotiate at all supported speeds)
+
+Speed forces the line speed to the specified value in megabits per second
+(Mbps). If this parameter is not specified or is set to 0 and the link
+partner is set to auto-negotiate, the board will auto-detect the correct
+speed. Duplex should also be set when Speed is set to either 10 or 100.
+
 
 TxDescriptors
-Valid Range: 80-256 for 82542 and 82543-based adapters
-             80-4096 for all other supported adapters
+-------------
+Valid Range:   80-256 for 82542 and 82543-based adapters
+               80-4096 for all other supported adapters
 Default Value: 256
-    This value is the number of transmit descriptors allocated by the driver.
-    Increasing this value allows the driver to queue more transmits. Each 
-    descriptor is 16 bytes.
 
-    NOTE: Depending on the available system resources, the request for a
-    higher number of transmit descriptors may be denied.  In this case,
-    use a lower number.
+This value is the number of transmit descriptors allocated by the driver.
+Increasing this value allows the driver to queue more transmits. Each
+descriptor is 16 bytes.
+
+NOTE:  Depending on the available system resources, the request for a
+       higher number of transmit descriptors may be denied.  In this case,
+       use a lower number.
+
 
 TxIntDelay
-Valid Range: 0-65535 (0=off)
+----------
+Valid Range:   0-65535 (0=off)
 Default Value: 64
-    This value delays the generation of transmit interrupts in units of 
-    1.024 microseconds. Transmit interrupt reduction can improve CPU
-    efficiency if properly tuned for specific network traffic. If the
-    system is reporting dropped transmits, this value may be set too high
-    causing the driver to run out of available transmit descriptors.
-
-TxAbsIntDelay (82540, 82545 and later adapters only)
-Valid Range: 0-65535 (0=off)
+
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds. Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic. If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+
+TxAbsIntDelay
+-------------
+(This parameter is supported only on 82540, 82545 and later adapters.)
+Valid Range:   0-65535 (0=off)
 Default Value: 64
-    This value, in units of 1.024 microseconds, limits the delay in which a 
-    transmit interrupt is generated. Useful only if TxIntDelay is non-zero, 
-    this value ensures that an interrupt is generated after the initial 
-    packet is sent on the wire within the set amount of time.  Proper tuning,
-    along with TxIntDelay, may improve traffic throughput in specific 
-    network conditions.
-
-XsumRX (not available on the 82542-based adapter)
-Valid Range: 0-1
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time.  Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+XsumRX
+------
+(This parameter is NOT supported on the 82542-based adapter.)
+Valid Range:   0-1
 Default Value: 1
-    A value of '1' indicates that the driver should enable IP checksum
-    offload for received packets (both UDP and TCP) to the adapter hardware.
+
+A value of '1' indicates that the driver should enable IP checksum
+offload for received packets (both UDP and TCP) to the adapter hardware.
+
 
 Speed and Duplex Configuration
 ==============================
 
-Three keywords are used to control the speed and duplex configuration. These 
-keywords are Speed, Duplex, and AutoNeg.
+Three keywords are used to control the speed and duplex configuration.
+These keywords are Speed, Duplex, and AutoNeg.
 
-If the board uses a fiber interface, these keywords are ignored, and the 
+If the board uses a fiber interface, these keywords are ignored, and the
 fiber interface board only links at 1000 Mbps full-duplex.
 
 For copper-based boards, the keywords interact as follows:
 
-  The default operation is auto-negotiate. The board advertises all supported
-  speed and duplex combinations, and it links at the highest common speed and
-  duplex mode IF the link partner is set to auto-negotiate.
+  The default operation is auto-negotiate. The board advertises all
+  supported speed and duplex combinations, and it links at the highest
+  common speed and duplex mode IF the link partner is set to auto-negotiate.
 
-  If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps is
-  advertised (The 1000BaseT spec requires auto-negotiation.)
+  If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
+  is advertised (The 1000BaseT spec requires auto-negotiation.)
 
   If Speed = 10 or 100, then both Speed and Duplex should be set. Auto-
-  negotiation is disabled, and the AutoNeg parameter is ignored. Partner SHOULD
-  also be forced.
+  negotiation is disabled, and the AutoNeg parameter is ignored. Partner
+  SHOULD also be forced.
+
+The AutoNeg parameter is used when more control is required over the
+auto-negotiation process.  It should be used when you wish to control which
+speed and duplex combinations are advertised during the auto-negotiation
+process.
+
+The parameter may be specified as either a decimal or hexidecimal value as
+determined by the bitmap below.
 
-The AutoNeg parameter is used when more control is required over the auto-
-negotiation process. When this parameter is used, Speed and Duplex parameters 
-must not be specified. The following table describes supported values for the 
-AutoNeg parameter:
+Bit position   7      6      5       4       3      2      1       0
+Decimal Value  128    64     32      16      8      4      2       1
+Hex value      80     40     20      10      8      4      2       1
+Speed (Mbps)   N/A    N/A    1000    N/A     100    100    10      10
+Duplex                       Full            Full   Half   Full    Half
 
-Speed (Mbps)   		 1000      100    100    10     10
-Duplex                   Full      Full   Half   Full   Half
-Value (in base 16)       0x20      0x08   0x04   0x02   0x01
+Some examples of using AutoNeg:
 
-Example: insmod e1000 AutoNeg=0x03, loads e1000 and specifies (10 full duplex, 
-10 half duplex) for negotiation with the peer.
+  modprobe e1000 AutoNeg=0x01 (Restricts autonegotiation to 10 Half)
+  modprobe e1000 AutoNeg=1 (Same as above)
+  modprobe e1000 AutoNeg=0x02 (Restricts autonegotiation to 10 Full)
+  modprobe e1000 AutoNeg=0x03 (Restricts autonegotiation to 10 Half or 10 Full)
+  modprobe e1000 AutoNeg=0x04 (Restricts autonegotiation to 100 Half)
+  modprobe e1000 AutoNeg=0x05 (Restricts autonegotiation to 10 Half or 100
+  Half)
+  modprobe e1000 AutoNeg=0x020 (Restricts autonegotiation to 1000 Full)
+  modprobe e1000 AutoNeg=32 (Same as above)
 
-Note that setting AutoNeg does not guarantee that the board will link at the 
-highest specified speed or duplex mode, but the board will link at the 
-highest possible speed/duplex of the link partner IF the link partner is also
-set to auto-negotiate. If the link partner is forced speed/duplex, the 
-adapter MUST be forced to the same speed/duplex.
+Note that when this parameter is used, Speed and Duplex must not be specified.
+
+If the link partner is forced to a specific speed and duplex, then this
+parameter should not be used.  Instead, use the Speed and Duplex parameters
+previously mentioned to force the adapter to the same speed and duplex.
 
 
 Additional Configurations
@@ -276,19 +338,19 @@ Additional Configurations
   Configuring the Driver on Different Distributions
   -------------------------------------------------
 
-  Configuring a network driver to load properly when the system is started is
-  distribution dependent. Typically, the configuration process involves adding
-  an alias line to /etc/modules.conf as well as editing other system startup 
-  scripts and/or configuration files. Many popular Linux distributions ship 
-  with tools to make these changes for you. To learn the proper way to 
-  configure a network device for your system, refer to your distribution 
-  documentation. If during this process you are asked for the driver or module 
-  name, the name for the Linux Base Driver for the Intel PRO/1000 Family of 
-  Adapters is e1000.
+  Configuring a network driver to load properly when the system is started
+  is distribution dependent. Typically, the configuration process involves
+  adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
+  as editing other system startup scripts and/or configuration files. Many
+  popular Linux distributions ship with tools to make these changes for you.
+  To learn the proper way to configure a network device for your system,
+  refer to your distribution documentation. If during this process you are
+  asked for the driver or module name, the name for the Linux Base Driver
+  for the Intel PRO/1000 Family of Adapters is e1000.
 
-  As an example, if you install the e1000 driver for two PRO/1000 adapters 
-  (eth0 and eth1) and set the speed and duplex to 10full and 100half, add the 
-  following to modules.conf:
+  As an example, if you install the e1000 driver for two PRO/1000 adapters
+  (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
+  the following to modules.conf or or modprobe.conf:
 
        alias eth0 e1000
        alias eth1 e1000
@@ -297,9 +359,9 @@ Additional Configurations
   Viewing Link Messages
   ---------------------
 
-  Link messages will not be displayed to the console if the distribution is 
-  restricting system messages. In order to see network driver link messages on 
-  your console, set dmesg to eight by entering the following:
+  Link messages will not be displayed to the console if the distribution is
+  restricting system messages. In order to see network driver link messages
+  on your console, set dmesg to eight by entering the following:
 
        dmesg -n 8
 
@@ -308,22 +370,42 @@ Additional Configurations
   Jumbo Frames
   ------------
 
-  The driver supports Jumbo Frames for all adapters except 82542-based 
-  adapters. Jumbo Frames support is enabled by changing the MTU to a value 
-  larger than the default of 1500. Use the ifconfig command to increase the 
-  MTU size. For example:
+  The driver supports Jumbo Frames for all adapters except 82542 and
+  82573-based adapters. Jumbo Frames support is enabled by changing the
+  MTU to a value larger than the default of 1500. Use the ifconfig command
+  to increase the MTU size. For example:
+
+       ifconfig eth<x> mtu 9000 up
+
+  This setting is not saved across reboots.  It can be made permanent if
+  you add:
+
+       MTU=9000
 
-        ifconfig ethx mtu 9000 up
+   to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>.  This example
+   applies to the Red Hat distributions; other distributions may store this
+   setting in a different location.
 
-  The maximum MTU setting for Jumbo Frames is 16110. This value coincides 
-  with the maximum Jumbo Frames size of 16128.
+  Notes:
 
-  NOTE: Jumbo Frames are supported at 1000 Mbps only. Using Jumbo Frames at 
-  10 or 100 Mbps may result in poor performance or loss of link.
+  - To enable Jumbo Frames, increase the MTU size on the interface beyond
+    1500.
+  - The maximum MTU setting for Jumbo Frames is 16110. This value coincides
+    with the maximum Jumbo Frames size of 16128.
+  - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
+    loss of link.
+  - Some Intel gigabit adapters that support Jumbo Frames have a frame size
+    limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
+    The adapters with this limitation are based on the Intel 82571EB and
+    82572EI controllers, which correspond to these product names:
+     Intel® PRO/1000 PT Dual Port Server Adapter
+     Intel® PRO/1000 PF Dual Port Server Adapter
+     Intel® PRO/1000 PT Server Adapter
+     Intel® PRO/1000 PT Desktop Adapter
+     Intel® PRO/1000 PF Server Adapter
 
+  - The Intel PRO/1000 PM Network Connection does not support jumbo frames.
 
-  NOTE: MTU designates the frame size. To enable Jumbo Frames, increase the
-  MTU size on the interface beyond 1500.
 
   Ethtool
   -------
@@ -333,32 +415,41 @@ Additional Configurations
   version 1.6 or later is required for this functionality.
 
   The latest release of ethtool can be found from
-  http://sf.net/projects/gkernel.  
+  http://sourceforge.net/projects/gkernel.
 
-  NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support 
-  for a more complete ethtool feature set can be enabled by upgrading 
-  ethtool to ethtool-1.8.1. 
+  NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
+  for a more complete ethtool feature set can be enabled by upgrading
+  ethtool to ethtool-1.8.1.
 
   Enabling Wake on LAN* (WoL)
   ---------------------------
 
   WoL is configured through the Ethtool* utility. Ethtool is included with
-  all versions of Red Hat after Red Hat 7.2. For other Linux distributions, 
-  download and install Ethtool from the following website: 
+  all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
+  download and install Ethtool from the following website:
   http://sourceforge.net/projects/gkernel.
 
-  For instructions on enabling WoL with Ethtool, refer to the website listed 
+  For instructions on enabling WoL with Ethtool, refer to the website listed
   above.
 
-  WoL will be enabled on the system during the next shut down or reboot. 
-  For this driver version, in order to enable WoL, the e1000 driver must be 
+  WoL will be enabled on the system during the next shut down or reboot.
+  For this driver version, in order to enable WoL, the e1000 driver must be
   loaded when shutting down or rebooting the system.
 
   NAPI
   ----
 
   NAPI (Rx polling mode) is supported in the e1000 driver. NAPI is enabled
-  or disabled based on the configuration of the kernel. 
+  or disabled based on the configuration of the kernel. To override
+  the default, use the following compile-time flags.
+
+  To enable NAPI, compile the driver module, passing in a configuration option:
+
+       make CFLAGS_EXTRA=-DE1000_NAPI install
+
+  To disable NAPI, compile the driver module, passing in a configuration option:
+
+       make CFLAGS_EXTRA=-DE1000_NO_NAPI install
 
   See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
 
@@ -369,10 +460,85 @@ Known Issues
   Jumbo Frames System Requirement
   -------------------------------
 
-  Memory allocation failures have been observed on Linux systems with 64 MB 
-  of RAM or less that are running Jumbo Frames. If you are using Jumbo Frames,
-  your system may require more than the advertised minimum requirement of 64 MB
-  of system memory.
+  Memory allocation failures have been observed on Linux systems with 64 MB
+  of RAM or less that are running Jumbo Frames. If you are using Jumbo
+  Frames, your system may require more than the advertised minimum
+  requirement of 64 MB of system memory.
+
+  Performance Degradation with Jumbo Frames
+  -----------------------------------------
+
+  Degradation in throughput performance may be observed in some Jumbo frames
+  environments. If this is observed, increasing the application's socket
+  buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
+  may help. See the specific application manual and
+  /usr/src/linux*/Documentation/
+  networking/ip-sysctl.txt for more details.
+
+  Jumbo frames on Foundry BigIron 8000 switch
+  -------------------------------------------
+  There is a known issue using Jumbo frames when connected to a Foundry
+  BigIron 8000 switch. This is a 3rd party limitation. If you experience
+  loss of packets, lower the MTU size.
+
+  Multiple Interfaces on Same Ethernet Broadcast Network
+  ------------------------------------------------------
+
+  Due to the default ARP behavior on Linux, it is not possible to have
+  one system on two IP networks in the same Ethernet broadcast domain
+  (non-partitioned switch) behave as expected. All Ethernet interfaces
+  will respond to IP traffic for any IP address assigned to the system.
+  This results in unbalanced receive traffic.
+
+  If you have multiple interfaces in a server, either turn on ARP
+  filtering by entering:
+
+      echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+  (this only works if your kernel's version is higher than 2.4.5),
+
+  NOTE: This setting is not saved across reboots. The configuration
+  change can be made permanent by adding the line:
+      net.ipv4.conf.all.arp_filter = 1
+  to the file /etc/sysctl.conf
+
+        or,
+
+  install the interfaces in separate broadcast domains (either in
+  different switches or in a switch partitioned to VLANs).
+
+  82541/82547 can't link or are slow to link with some link partners
+  -----------------------------------------------------------------
+
+  There is a known compatibility issue with 82541/82547 and some
+  low-end switches where the link will not be established, or will
+  be slow to establish.  In particular, these switches are known to
+  be incompatible with 82541/82547:
+
+      Planex FXG-08TE
+      I-O Data ETG-SH8
+
+  To workaround this issue, the driver can be compiled with an override
+  of the PHY's master/slave setting.  Forcing master or forcing slave
+  mode will improve time-to-link.
+
+      # make EXTRA_CFLAGS=-DE1000_MASTER_SLAVE=<n>
+
+  Where <n> is:
+
+      0 = Hardware default
+      1 = Master mode
+      2 = Slave mode
+      3 = Auto master/slave
+
+  Disable rx flow control with ethtool
+  ------------------------------------
+
+  In order to disable receive flow control using ethtool, you must turn
+  off auto-negotiation on the same command line.
+
+  For example:
+
+     ethtool -A eth? autoneg off rx off
 
 
 Support
@@ -382,20 +548,24 @@ For general information, go to the Intel support website at:
 
     http://support.intel.com
 
+    or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
 If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related to 
-the issue to linux.nics@intel.com.
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sourceforge.net
 
 
 License
 =======
 
-This software program is released under the terms of a license agreement 
-between you ('Licensee') and Intel. Do not use or load this software or any 
-associated materials (collectively, the 'Software') until you have carefully 
-read the full terms and conditions of the LICENSE located in this software 
-package. By loading or using the Software, you agree to the terms of this 
-Agreement. If you do not agree with the terms of this Agreement, do not 
+This software program is released under the terms of a license agreement
+between you ('Licensee') and Intel. Do not use or load this software or any
+associated materials (collectively, the 'Software') until you have carefully
+read the full terms and conditions of the file COPYING located in this software
+package. By loading or using the Software, you agree to the terms of this
+Agreement. If you do not agree with the terms of this Agreement, do not
 install or use the Software.
 
 * Other names and brands may be claimed as the property of others.

Documentation/networking/ip-sysctl.txt

@@ -355,6 +355,13 @@ somaxconn - INTEGER
 	Defaults to 128.  See also tcp_max_syn_backlog for additional tuning
 	for TCP sockets.
 
+tcp_workaround_signed_windows - BOOLEAN
+	If set, assume no receipt of a window scaling option means the
+	remote TCP is broken and treats the window as a signed quantity.
+	If unset, assume the remote TCP is not broken even if we do
+	not receive a window scaling option from them.
+	Default: 0
+
 IP Variables:
 
 ip_local_port_range - 2 INTEGERS
@@ -619,6 +626,11 @@ arp_ignore - INTEGER
 	The max value from conf/{all,interface}/arp_ignore is used
 	when ARP request is received on the {interface}
 
+arp_accept - BOOLEAN
+	Define behavior when gratuitous arp replies are received:
+	0 - drop gratuitous arp frames
+	1 - accept gratuitous arp frames
+
 app_solicit - INTEGER
 	The maximum number of probes to send to the user space ARP daemon
 	via netlink before dropping back to multicast probes (see
@@ -717,6 +729,33 @@ accept_ra - BOOLEAN
 	Functional default: enabled if local forwarding is disabled.
 			    disabled if local forwarding is enabled.
 
+accept_ra_defrtr - BOOLEAN
+	Learn default router in Router Advertisement.
+
+	Functional default: enabled if accept_ra is enabled.
+			    disabled if accept_ra is disabled.
+
+accept_ra_pinfo - BOOLEAN
+	Learn Prefix Inforamtion in Router Advertisement.
+
+	Functional default: enabled if accept_ra is enabled.
+			    disabled if accept_ra is disabled.
+
+accept_ra_rt_info_max_plen - INTEGER
+	Maximum prefix length of Route Information in RA.
+
+	Route Information w/ prefix larger than or equal to this
+	variable shall be ignored.
+
+	Functional default: 0 if accept_ra_rtr_pref is enabled.
+			    -1 if accept_ra_rtr_pref is disabled.
+
+accept_ra_rtr_pref - BOOLEAN
+	Accept Router Preference in RA.
+
+	Functional default: enabled if accept_ra is enabled.
+			    disabled if accept_ra is disabled.
+
 accept_redirects - BOOLEAN
 	Accept Redirects.
 
@@ -727,8 +766,8 @@ autoconf - BOOLEAN
 	Autoconfigure addresses using Prefix Information in Router 
 	Advertisements.
 
-	Functional default: enabled if accept_ra is enabled.
-			    disabled if accept_ra is disabled.
+	Functional default: enabled if accept_ra_pinfo is enabled.
+			    disabled if accept_ra_pinfo is disabled.
 
 dad_transmits - INTEGER
 	The amount of Duplicate Address Detection probes to send.
@@ -771,6 +810,12 @@ mtu - INTEGER
 	Default Maximum Transfer Unit
 	Default: 1280 (IPv6 required minimum)
 
+router_probe_interval - INTEGER
+	Minimum interval (in seconds) between Router Probing described
+	in RFC4191.
+
+	Default: 60
+
 router_solicitation_delay - INTEGER
 	Number of seconds to wait after interface is brought up
 	before sending Router Solicitations.

Documentation/usb/et61x251.txt

@@ -176,6 +176,14 @@ Description:    Force the application to unmap previously mapped buffer memory
                 1 = force memory unmapping (save memory)
 Default:        0
 -------------------------------------------------------------------------------
+Name:           frame_timeout
+Type:           uint array (min = 0, max = 64)
+Syntax:         <n[,...]>
+Description:    Timeout for a video frame in seconds. This parameter is
+                specific for each detected camera. This parameter can be
+                changed at runtime thanks to the /sys filesystem interface.
+Default:        2
+-------------------------------------------------------------------------------
 Name:           debug
 Type:           ushort
 Syntax:         <n>
@@ -266,7 +274,7 @@ the V4L2 interface.
 
 
 10. Notes for V4L2 application developers
-========================================
+=========================================
 This driver follows the V4L2 API specifications. In particular, it enforces two
 rules:
 

Documentation/usb/sn9c102.txt

@@ -196,6 +196,14 @@ Description:    Force the application to unmap previously mapped buffer memory
                 1 = force memory unmapping (save memory)
 Default:        0
 -------------------------------------------------------------------------------
+Name:           frame_timeout
+Type:           uint array (min = 0, max = 64)
+Syntax:         <n[,...]>
+Description:    Timeout for a video frame in seconds. This parameter is
+                specific for each detected camera. This parameter can be
+                changed at runtime thanks to the /sys filesystem interface.
+Default:        2
+-------------------------------------------------------------------------------
 Name:           debug
 Type:           ushort
 Syntax:         <n> 
@@ -321,6 +329,7 @@ Vendor ID  Product ID
 ---------  ----------
 0x0c45     0x6001
 0x0c45     0x6005
+0x0c45     0x6007
 0x0c45     0x6009
 0x0c45     0x600d
 0x0c45     0x6024
@@ -370,6 +379,7 @@ HV7131D     Hynix Semiconductor, Inc.
 MI-0343     Micron Technology, Inc.
 OV7630      OmniVision Technologies, Inc.
 PAS106B     PixArt Imaging, Inc.
+PAS202BCA   PixArt Imaging, Inc.
 PAS202BCB   PixArt Imaging, Inc.
 TAS5110C1B  Taiwan Advanced Sensor Corporation
 TAS5130D1B  Taiwan Advanced Sensor Corporation
@@ -493,6 +503,7 @@ Many thanks to following persons for their contribute (listed in alphabetical
 order):
 
 - Luca Capello for the donation of a webcam;
+- Philippe Coval for having helped testing the PAS202BCA image sensor;
 - Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
   donation of a webcam;
 - Jon Hollstrom for the donation of a webcam;

Documentation/usb/zc0301.txt

@@ -0,0 +1,254 @@
+
+                    ZC0301 Image Processor and Control Chip
+                                Driver for Linux
+                    =======================================
+
+                               - Documentation -
+
+
+Index
+=====
+1.  Copyright
+2.  Disclaimer
+3.  License
+4.  Overview and features
+5.  Module dependencies
+6.  Module loading
+7.  Module parameters
+8.  Supported devices
+9.  Notes for V4L2 application developers
+10. Contact information
+11. Credits
+
+
+1. Copyright
+============
+Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+
+
+2. Disclaimer
+=============
+This software is not developed or sponsored by Z-Star Microelectronics Corp.
+Trademarks are property of their respective owner.
+
+
+3. License
+==========
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+4. Overview and features
+========================
+This driver supports the video interface of the devices mounting the ZC0301
+Image Processor and Control Chip.
+
+The driver relies on the Video4Linux2 and USB core modules. It has been
+designed to run properly on SMP systems as well.
+
+The latest version of the ZC0301 driver can be found at the following URL:
+http://www.linux-projects.org/
+
+Some of the features of the driver are:
+
+- full compliance with the Video4Linux2 API (see also "Notes for V4L2
+  application developers" paragraph);
+- available mmap or read/poll methods for video streaming through isochronous
+  data transfers;
+- automatic detection of image sensor;
+- video format is standard JPEG;
+- dynamic driver control thanks to various module parameters (see "Module
+  parameters" paragraph);
+- up to 64 cameras can be handled at the same time; they can be connected and
+  disconnected from the host many times without turning off the computer, if
+  the system supports hotplugging;
+
+
+5. Module dependencies
+======================
+For it to work properly, the driver needs kernel support for Video4Linux and
+USB.
+
+The following options of the kernel configuration file must be enabled and
+corresponding modules must be compiled:
+
+	# Multimedia devices
+	#
+	CONFIG_VIDEO_DEV=m
+
+	# USB support
+	#
+	CONFIG_USB=m
+
+In addition, depending on the hardware being used, the modules below are
+necessary:
+
+	# USB Host Controller Drivers
+	#
+	CONFIG_USB_EHCI_HCD=m
+	CONFIG_USB_UHCI_HCD=m
+	CONFIG_USB_OHCI_HCD=m
+
+The ZC0301 controller also provides a built-in microphone interface. It is
+supported by the USB Audio driver thanks to the ALSA API:
+
+	# Sound
+	#
+	CONFIG_SOUND=y
+
+	# Advanced Linux Sound Architecture
+	#
+	CONFIG_SND=m
+
+	# USB devices
+	#
+	CONFIG_SND_USB_AUDIO=m
+
+And finally:
+
+	# USB Multimedia devices
+	#
+	CONFIG_USB_ZC0301=m
+
+
+6. Module loading
+=================
+To use the driver, it is necessary to load the "zc0301" module into memory
+after every other module required: "videodev", "usbcore" and, depending on
+the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+
+Loading can be done as shown below:
+
+	[root@localhost home]# modprobe zc0301
+
+At this point the devices should be recognized. You can invoke "dmesg" to
+analyze kernel messages and verify that the loading process has gone well:
+
+	[user@localhost home]$ dmesg
+
+
+7. Module parameters
+====================
+Module parameters are listed below:
+-------------------------------------------------------------------------------
+Name:           video_nr
+Type:           short array (min = 0, max = 64)
+Syntax:         <-1|n[,...]>
+Description:    Specify V4L2 minor mode number:
+                -1 = use next available
+                 n = use minor number n
+                You can specify up to 64 cameras this way.
+                For example:
+                video_nr=-1,2,-1 would assign minor number 2 to the second
+                registered camera and use auto for the first one and for every
+                other camera.
+Default:        -1
+-------------------------------------------------------------------------------
+Name:           force_munmap
+Type:           bool array (min = 0, max = 64)
+Syntax:         <0|1[,...]>
+Description:    Force the application to unmap previously mapped buffer memory
+                before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
+                all the applications support this feature. This parameter is
+                specific for each detected camera.
+                0 = do not force memory unmapping
+                1 = force memory unmapping (save memory)
+Default:        0
+-------------------------------------------------------------------------------
+Name:           frame_timeout
+Type:           uint array (min = 0, max = 64)
+Syntax:         <n[,...]>
+Description:    Timeout for a video frame in seconds. This parameter is
+                specific for each detected camera. This parameter can be
+                changed at runtime thanks to the /sys filesystem interface.
+Default:        2
+-------------------------------------------------------------------------------
+Name:           debug
+Type:           ushort
+Syntax:         <n>
+Description:    Debugging information level, from 0 to 3:
+                0 = none (use carefully)
+                1 = critical errors
+                2 = significant informations
+                3 = more verbose messages
+                Level 3 is useful for testing only, when only one device
+                is used at the same time. It also shows some more informations
+                about the hardware being detected. This module parameter can be
+                changed at runtime thanks to the /sys filesystem interface.
+Default:        2
+-------------------------------------------------------------------------------
+
+
+8. Supported devices
+====================
+None of the names of the companies as well as their products will be mentioned
+here. They have never collaborated with the author, so no advertising.
+
+From the point of view of a driver, what unambiguously identify a device are
+its vendor and product USB identifiers. Below is a list of known identifiers of
+devices mounting the ZC0301 Image Processor and Control Chips:
+
+Vendor ID  Product ID
+---------  ----------
+0x041e     0x4017
+0x041e     0x401c
+0x041e     0x401e
+0x041e     0x4034
+0x041e     0x4035
+0x046d     0x08ae
+0x0ac8     0x0301
+0x10fd     0x8050
+
+The list above does not imply that all those devices work with this driver: up
+until now only the ones that mount the following image sensors are supported;
+kernel messages will always tell you whether this is the case:
+
+Model       Manufacturer
+-----       ------------
+PAS202BCB   PixArt Imaging, Inc.
+
+
+9. Notes for V4L2 application developers
+========================================
+This driver follows the V4L2 API specifications. In particular, it enforces two
+rules:
+
+- exactly one I/O method, either "mmap" or "read", is associated with each
+file descriptor. Once it is selected, the application must close and reopen the
+device to switch to the other I/O method;
+
+- although it is not mandatory, previously mapped buffer memory should always
+be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
+The same number of buffers as before will be allocated again to match the size
+of the new video frames, so you have to map the buffers again before any I/O
+attempts on them.
+
+
+10. Contact information
+=======================
+The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
+
+GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
+'FCE635A4'; the public 1024-bit key should be available at any keyserver;
+the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
+
+
+11. Credits
+===========
+- Informations about the chip internals needed to enable the I2C protocol have
+  been taken from the documentation of the ZC030x Video4Linux1 driver written
+  by Andrew Birkett <andy@nobugs.org>;
+- The initialization values of the ZC0301 controller connected to the PAS202BCB
+  image sensor have been taken from the SPCA5XX driver maintained by
+  Michel Xhaard <mxhaard@magic.fr>.

Documentation/video4linux/CARDLIST.cx88

@@ -43,3 +43,5 @@
  42 -> digitalnow DNTV Live! DVB-T Pro                     [1822:0025]
  43 -> KWorld/VStream XPert DVB-T with cx22702             [17de:08a1]
  44 -> DViCO FusionHDTV DVB-T Dual Digital                 [18ac:db50,18ac:db54]
+ 45 -> KWorld HardwareMpegTV XPert                         [17de:0840]
+ 46 -> DViCO FusionHDTV DVB-T Hybrid                       [18ac:db40,18ac:db44]

Documentation/video4linux/CARDLIST.em28xx

@@ -8,3 +8,4 @@
   7 -> Leadtek Winfast USB II                   (em2800)
   8 -> Kworld USB2800                           (em2800)
   9 -> Pinnacle Dazzle DVC 90                   (em2820/em2840) [2304:0207]
+ 12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)

Documentation/video4linux/CARDLIST.saa7134

@@ -83,3 +83,12 @@
  82 -> MSI TV@Anywhere plus                     [1462:6231]
  83 -> Terratec Cinergy 250 PCI TV              [153b:1160]
  84 -> LifeView FlyDVB Trio                     [5168:0319]
+ 85 -> AverTV DVB-T 777                         [1461:2c05]
+ 86 -> LifeView FlyDVB-T                        [5168:0301]
+ 87 -> ADS Instant TV Duo Cardbus PTV331        [0331:1421]
+ 88 -> Tevion/KWorld DVB-T 220RF                [17de:7201]
+ 89 -> ELSA EX-VISION 700TV                     [1048:226c]
+ 90 -> Kworld ATSC110                           [17de:7350]
+ 91 -> AVerMedia A169 B                         [1461:7360]
+ 92 -> AVerMedia A169 B1                        [1461:6360]
+ 93 -> Medion 7134 Bridge #2                    [16be:0005]

Documentation/video4linux/CARDLIST.tuner

@@ -64,8 +64,10 @@ tuner=62 - Philips TEA5767HN FM Radio
 tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
 tuner=64 - LG TDVS-H062F/TUA6034
 tuner=65 - Ymec TVF66T5-B/DFF
-tuner=66 - LG NTSC (TALN mini series)
+tuner=66 - LG TALN series
 tuner=67 - Philips TD1316 Hybrid Tuner
 tuner=68 - Philips TUV1236D ATSC/NTSC dual in
-tuner=69 - Tena TNF 5335 MF
+tuner=69 - Tena TNF 5335 and similar models
 tuner=70 - Samsung TCPN 2121P30A
+tuner=71 - Xceive xc3028
+tuner=72 - Thomson FE6600

Documentation/video4linux/README.cpia2

@@ -0,0 +1,130 @@
+$Id: README,v 1.7 2005/08/29 23:39:57 sbertin Exp $
+
+1. Introduction
+
+	This is a driver for STMicroelectronics's CPiA2 (second generation
+Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG
+stream at up to vga size. It implements the Video4Linux interface as much as
+possible.  Since the V4L interface does not support compressed formats, only
+an mjpeg enabled application can be used with the camera. We have modified the
+gqcam application to view this stream.
+
+	The driver is implemented as two kernel modules. The cpia2 module
+contains the camera functions and the V4L interface.  The cpia2_usb module
+contains usb specific functions.  The main reason for this was the size of the
+module was getting out of hand, so I separted them.  It is not likely that
+there will be a parallel port version.
+
+FEATURES:
+   - Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos
+     sensors. I only have the vga sensor, so can't test the other.
+   - Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between.
+     VGA and QVGA are the native image sizes for the VGA camera. CIF is done
+     in the coprocessor by scaling QVGA.  All other sizes are done by clipping.
+   - Palette: YCrCb, compressed with MJPEG.
+   - Some compression parameters are settable.
+   - Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA).
+   - Adjust brightness, color, contrast while streaming.
+   - Flicker control settable for 50 or 60 Hz mains frequency.
+
+2. Making and installing the stv672 driver modules:
+
+	Requirements:
+	-------------
+	This should work with 2.4 (2.4.23 and later) and 2.6 kernels, but has
+only been tested on 2.6.  Video4Linux must be either compiled into the kernel or
+available as a module.  Video4Linux2 is automatically detected and made
+available at compile time.
+
+	Compiling:
+	----------
+	As root, do a make install.  This will compile and install the modules
+into the media/video directory in the module tree. For 2.4 kernels, use
+Makefile_2.4 (aka do make -f Makefile_2.4 install).
+
+	Setup:
+	------
+	Use 'modprobe cpia2' to load and 'modprobe -r cpia2' to unload. This
+may be done automatically by your distribution.
+
+3. Driver options
+
+	Option		Description
+	------		-----------
+	video_nr	video device to register (0=/dev/video0, etc)
+			range -1 to 64.  default is -1 (first available)
+			If you have more than 1 camera, this MUST be -1.
+	buffer_size	Size for each frame buffer in bytes (default 68k)
+	num_buffers	Number of frame buffers (1-32, default 3)
+	alternate	USB Alternate (2-7, default 7)
+	flicker_freq	Frequency for flicker reduction(50 or 60, default 60)
+	flicker_mode	0 to disable, or 1 to enable flicker reduction.
+			(default 0). This is only effective if the camera
+			uses a stv0672 coprocessor.
+
+	Setting the options:
+	--------------------
+	If you are using modules, edit /etc/modules.conf and add an options
+line like this:
+	options cpia2 num_buffers=3 buffer_size=65535
+
+	If the driver is compiled into the kernel, at boot time specify them
+like this:
+	cpia2.num_buffers=3 cpia2.buffer_size=65535
+
+	What buffer size should I use?
+	------------------------------
+	The maximum image size depends on the alternate you choose, and the
+frame rate achieved by the camera.  If the compression engine is able to
+keep up with the frame rate, the maximum image size is given by the table
+below.
+	The compression engine starts out at maximum compression, and will
+increase image quality until it is close to the size in the table.  As long
+as the compression engine can keep up with the frame rate, after a short time
+the images will all be about the size in the table, regardless of resolution.
+	At low alternate settings, the compression engine may not be able to
+compress the image enough and will reduce the frame rate by producing larger
+images.
+	The default of 68k should be good for most users.  This will handle
+any alternate at frame rates down to 15fps.  For lower frame rates, it may
+be necessary to increase the buffer size to avoid having frames dropped due
+to insufficient space.
+
+			     Image size(bytes)
+	Alternate  bytes/ms   15fps    30fps
+	    2         128      8533     4267
+	    3         384     25600    12800
+	    4         640     42667    21333
+	    5         768     51200    25600
+	    6         896     59733    29867
+	    7        1023     68200    34100
+
+	How many buffers should I use?
+	------------------------------
+	For normal streaming, 3 should give the best results.  With only 2,
+it is possible for the camera to finish sending one image just after a
+program has started reading the other.  If this happens, the driver must drop
+a frame.  The exception to this is if you have a heavily loaded machine.  In
+this case use 2 buffers.  You are probably not reading at the full frame rate.
+If the camera can send multiple images before a read finishes, it could
+overwrite the third buffer before the read finishes, leading to a corrupt
+image.  Single and double buffering have extra checks to avoid overwriting.
+
+4. Using the camera
+
+	We are providing a modified gqcam application to view the output. In
+order to avoid confusion, here it is called mview.  There is also the qx5view
+program which can also control the lights on the qx5 microscope. MJPEG Tools
+(http://mjpeg.sourceforge.net) can also be used to record from the camera.
+
+5. Notes to developers:
+
+   - This is a driver version stripped of the 2.4 back compatibility
+     and old MJPEG ioctl API. See cpia2.sf.net for 2.4 support.
+
+6. Thanks:
+
+   - Peter Pregler <Peter_Pregler@email.com>,
+     Scott J. Bertin <scottbertin@yahoo.com>, and
+     Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which
+     this one was modelled from.

Documentation/video4linux/cpia2_overview.txt

@@ -0,0 +1,38 @@
+			Programmer's View of Cpia2
+
+Cpia2 is the second generation video coprocessor from VLSI Vision Ltd (now a
+division of ST Microelectronics).  There are two versions.  The first is the
+STV0672, which is capable of up to 30 frames per second (fps) in frame sizes
+up to CIF, and 15 fps for VGA frames.  The STV0676 is an improved version,
+which can handle up to 30 fps VGA.  Both coprocessors can be attached to two
+CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor.  These will
+be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors.
+
+The two chipsets operate almost identically.  The core is an 8051 processor,
+running two different versions of firmware.  The 672 runs the VP4 video
+processor code, the 676 runs VP5.  There are a few differences in register
+mappings for the two chips.  In these cases, the symbols defined in the
+header files are marked with VP4 or VP5 as part of the symbol name.
+
+The cameras appear externally as three sets of registers. Setting register
+values is the only way to control the camera.  Some settings are
+interdependant, such as the sequence required to power up the camera. I will
+try to make note of all of these cases.
+
+The register sets are called blocks.  Block 0 is the system block.  This
+section is always powered on when the camera is plugged in.  It contains
+registers that control housekeeping functions such as powering up the video
+processor.  The video processor is the VP block.  These registers control
+how the video from the sensor is processed.  Examples are timing registers,
+user mode (vga, qvga), scaling, cropping, framerates, and so on.  The last
+block is the video compressor (VC).  The video stream sent from the camera is
+compressed as Motion JPEG (JPEGA).  The VC controls all of the compression
+parameters.  Looking at the file cpia2_registers.h, you can get a full view
+of these registers and the possible values for most of them.
+
+One or more registers can be set or read by sending a usb control message to
+the camera.  There are three modes for this.  Block mode requests a number
+of contiguous registers.  Random mode reads or writes random registers with
+a tuple structure containing address/value pairs.  The repeat mode is only
+used by VP4 to load a firmware patch.  It contains a starting address and
+a sequence of bytes to be written into a gpio port.

MAINTAINERS

@@ -1349,10 +1349,10 @@ S:	Maintained
 INTEL PRO/100 ETHERNET SUPPORT
 P:	John Ronciak
 M:	john.ronciak@intel.com
-P:	Ganesh Venkatesan
-M:	ganesh.venkatesan@intel.com
 P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
+P:	Jeff Kirsher
+M:	jeffrey.t.kirsher@intel.com
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
@@ -1361,18 +1361,22 @@ P:	Jeb Cramer
 M:	cramerj@intel.com
 P:	John Ronciak
 M:	john.ronciak@intel.com
-P:	Ganesh Venkatesan
-M:	ganesh.venkatesan@intel.com
+P:	Jesse Brandeburg
+M:	jesse.brandeburg@intel.com
+P:	Jeff Kirsher
+M:	jeffrey.t.kirsher@intel.com
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
 INTEL PRO/10GbE SUPPORT
+P:	Jeff Kirsher
+M:	jeffrey.t.kirsher@intel.com
 P:	Ayyappan Veeraiyan
 M:	ayyappan.veeraiyan@intel.com
-P:	Ganesh Venkatesan
-M:	ganesh.venkatesan@intel.com
 P:	John Ronciak
 M:	john.ronciak@intel.com
+P:	Jesse Brandeburg
+M:	jesse.brandeburg@intel.com
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
@@ -1524,12 +1528,6 @@ M:	davem@davemloft.net
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
-LANMEDIA WAN CARD DRIVER
-P:	Andrew Stanley-Jones
-M:	asj@lanmedia.com
-W:	http://www.lanmedia.com/
-S:	Supported
- 
 LAPB module
 P:	Henner Eisen
 M:	eis@baty.hanse.de
@@ -2902,6 +2900,14 @@ L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
 
+USB ZC0301 DRIVER
+P:	Luca Risolia
+M:	luca.risolia@studio.unibo.it
+L:	linux-usb-devel@lists.sourceforge.net
+L:	video4linux-list@redhat.com
+W:	http://www.linux-projects.org
+S:	Maintained
+
 USB ZD1201 DRIVER
 P:	Jeroen Vreeken
 M:	pe1rxq@amsat.org

README

@@ -74,7 +74,7 @@ INSTALLING the kernel:
    whatever the kernel-du-jour happens to be.
 
  - You can also upgrade between 2.6.xx releases by patching.  Patches are
-   distributed in the traditional gzip and the new bzip2 format.  To
+   distributed in the traditional gzip and the newer bzip2 format.  To
    install by patching, get all the newer patch files, enter the
    top level directory of the kernel source (linux-2.6.xx) and execute:
 

arch/arm/common/locomo.c

@@ -788,6 +788,8 @@ static int locomo_probe(struct platform_device *dev)
 	if (!mem)
 		return -EINVAL;
 	irq = platform_get_irq(dev, 0);
+	if (irq < 0)
+		return -ENXIO;
 
 	return __locomo_probe(&dev->dev, mem, irq);
 }

arch/arm/common/sa1111.c

@@ -943,6 +943,8 @@ static int sa1111_probe(struct platform_device *pdev)
 	if (!mem)
 		return -EINVAL;
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
 
 	return __sa1111_probe(&pdev->dev, mem, irq);
 }

arch/arm/mach-realview/core.c

@@ -202,11 +202,6 @@ struct clk realview_clcd_clk = {
 /*
  * CLCD support.
  */
-#define SYS_CLCD_MODE_MASK	(3 << 0)
-#define SYS_CLCD_MODE_888	(0 << 0)
-#define SYS_CLCD_MODE_5551	(1 << 0)
-#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
-#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
 #define SYS_CLCD_NLCDIOON	(1 << 2)
 #define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
 #define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
@@ -360,29 +355,10 @@ static void realview_clcd_enable(struct clcd_fb *fb)
 	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 	u32 val;
 
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_MODE_MASK;
-
-	switch (fb->fb.var.green.length) {
-	case 5:
-		val |= SYS_CLCD_MODE_5551;
-		break;
-	case 6:
-		val |= SYS_CLCD_MODE_565_RLSB;
-		break;
-	case 8:
-		val |= SYS_CLCD_MODE_888;
-		break;
-	}
-
-	/*
-	 * Set the MUX
-	 */
-	writel(val, sys_clcd);
-
 	/*
-	 * And now enable the PSUs
+	 * Enable the PSUs
 	 */
+	val = readl(sys_clcd);
 	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 	writel(val, sys_clcd);
 }

arch/ia64/Kconfig

@@ -271,6 +271,25 @@ config SCHED_SMT
 	  Intel IA64 chips with MultiThreading at a cost of slightly increased
 	  overhead in some places. If unsure say N here.
 
+config PERMIT_BSP_REMOVE
+	bool "Support removal of Bootstrap Processor"
+	depends on HOTPLUG_CPU
+	default n
+	---help---
+	Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU
+	support. 
+
+config FORCE_CPEI_RETARGET
+	bool "Force assumption that CPEI can be re-targetted"
+	depends on PERMIT_BSP_REMOVE
+	default n
+	---help---
+	Say Y if you need to force the assumption that CPEI can be re-targetted to
+	any cpu in the system. This hint is available via ACPI 3.0 specifications.
+	Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP.
+	This option it useful to enable this feature on older BIOS's as well.
+	You can also enable this by using boot command line option force_cpei=1.
+
 config PREEMPT
 	bool "Preemptible Kernel"
         help

arch/ia64/configs/tiger_defconfig

@@ -116,6 +116,8 @@ CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
+CONFIG_PERMIT_BSP_REMOVE=y
+CONFIG_FORCE_CPEI_RETARGET=y
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y

arch/ia64/kernel/acpi.c

@@ -284,19 +284,24 @@ acpi_parse_plat_int_src(acpi_table_entry_header * header,
 	return 0;
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 unsigned int can_cpei_retarget(void)
 {
 	extern int cpe_vector;
+	extern unsigned int force_cpei_retarget;
 
 	/*
 	 * Only if CPEI is supported and the override flag
 	 * is present, otherwise return that its re-targettable
 	 * if we are in polling mode.
 	 */
-	if (cpe_vector > 0 && !acpi_cpei_override)
-		return 0;
-	else
-		return 1;
+	if (cpe_vector > 0) {
+		if (acpi_cpei_override || force_cpei_retarget)
+			return 1;
+		else
+			return 0;
+	}
+	return 1;
 }
 
 unsigned int is_cpu_cpei_target(unsigned int cpu)
@@ -315,6 +320,7 @@ void set_cpei_target_cpu(unsigned int cpu)
 {
 	acpi_cpei_phys_cpuid = cpu_physical_id(cpu);
 }
+#endif
 
 unsigned int get_cpei_target_cpu(void)
 {

arch/ia64/kernel/entry.S

@@ -1102,9 +1102,6 @@ skip_rbs_switch:
 	st8 [r2]=r8
 	st8 [r3]=r10
 .work_pending:
-	tbit.nz p6,p0=r31,TIF_SIGDELAYED		// signal delayed from  MCA/INIT/NMI/PMI context?
-(p6)	br.cond.sptk.few .sigdelayed
-	;;
 	tbit.z p6,p0=r31,TIF_NEED_RESCHED		// current_thread_info()->need_resched==0?
 (p6)	br.cond.sptk.few .notify
 #ifdef CONFIG_PREEMPT
@@ -1131,17 +1128,6 @@ skip_rbs_switch:
 (pLvSys)br.cond.sptk.few  .work_pending_syscall_end
 	br.cond.sptk.many .work_processed_kernel	// don't re-check
 
-// There is a delayed signal that was detected in MCA/INIT/NMI/PMI context where
-// it could not be delivered.  Deliver it now.  The signal might be for us and
-// may set TIF_SIGPENDING, so redrive ia64_leave_* after processing the delayed
-// signal.
-
-.sigdelayed:
-	br.call.sptk.many rp=do_sigdelayed
-	cmp.eq p6,p0=r0,r0				// p6 <- 1, always re-check
-(pLvSys)br.cond.sptk.few  .work_pending_syscall_end
-	br.cond.sptk.many .work_processed_kernel	// re-check
-
 .work_pending_syscall_end:
 	adds r2=PT(R8)+16,r12
 	adds r3=PT(R10)+16,r12

arch/ia64/kernel/iosapic.c

@@ -631,6 +631,7 @@ get_target_cpu (unsigned int gsi, int vector)
 {
 #ifdef CONFIG_SMP
 	static int cpu = -1;
+	extern int cpe_vector;
 
 	/*
 	 * In case of vector shared by multiple RTEs, all RTEs that
@@ -653,6 +654,11 @@ get_target_cpu (unsigned int gsi, int vector)
 	if (!cpu_online(smp_processor_id()))
 		return cpu_physical_id(smp_processor_id());
 
+#ifdef CONFIG_ACPI
+	if (cpe_vector > 0 && vector == IA64_CPEP_VECTOR)
+		return get_cpei_target_cpu();
+#endif
+
 #ifdef CONFIG_NUMA
 	{
 		int num_cpus, cpu_index, iosapic_index, numa_cpu, i = 0;

arch/ia64/kernel/irq.c

@@ -163,8 +163,19 @@ void fixup_irqs(void)
 {
 	unsigned int irq;
 	extern void ia64_process_pending_intr(void);
+	extern void ia64_disable_timer(void);
+	extern volatile int time_keeper_id;
+
+	ia64_disable_timer();
+
+	/*
+	 * Find a new timesync master
+	 */
+	if (smp_processor_id() == time_keeper_id) {
+		time_keeper_id = first_cpu(cpu_online_map);
+		printk ("CPU %d is now promoted to time-keeper master\n", time_keeper_id);
+	}
 
-	ia64_set_itv(1<<16);
 	/*
 	 * Phase 1: Locate irq's bound to this cpu and
 	 * relocate them for cpu removal.

arch/ia64/kernel/mca.c

@@ -281,14 +281,10 @@ ia64_mca_log_sal_error_record(int sal_info_type)
 		ia64_sal_clear_state_info(sal_info_type);
 }
 
-/*
- * platform dependent error handling
- */
-#ifndef PLATFORM_MCA_HANDLERS
-
 #ifdef CONFIG_ACPI
 
 int cpe_vector = -1;
+int ia64_cpe_irq = -1;
 
 static irqreturn_t
 ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs)
@@ -377,8 +373,6 @@ ia64_mca_register_cpev (int cpev)
 }
 #endif /* CONFIG_ACPI */
 
-#endif /* PLATFORM_MCA_HANDLERS */
-
 /*
  * ia64_mca_cmc_vector_setup
  *
@@ -630,6 +624,32 @@ copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat)
 	*tnat |= (nat << tslot);
 }
 
+/* Change the comm field on the MCA/INT task to include the pid that
+ * was interrupted, it makes for easier debugging.  If that pid was 0
+ * (swapper or nested MCA/INIT) then use the start of the previous comm
+ * field suffixed with its cpu.
+ */
+
+static void
+ia64_mca_modify_comm(const task_t *previous_current)
+{
+	char *p, comm[sizeof(current->comm)];
+	if (previous_current->pid)
+		snprintf(comm, sizeof(comm), "%s %d",
+			current->comm, previous_current->pid);
+	else {
+		int l;
+		if ((p = strchr(previous_current->comm, ' ')))
+			l = p - previous_current->comm;
+		else
+			l = strlen(previous_current->comm);
+		snprintf(comm, sizeof(comm), "%s %*s %d",
+			current->comm, l, previous_current->comm,
+			task_thread_info(previous_current)->cpu);
+	}
+	memcpy(current->comm, comm, sizeof(current->comm));
+}
+
 /* On entry to this routine, we are running on the per cpu stack, see
  * mca_asm.h.  The original stack has not been touched by this event.  Some of
  * the original stack's registers will be in the RBS on this stack.  This stack
@@ -648,7 +668,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
 		struct ia64_sal_os_state *sos,
 		const char *type)
 {
-	char *p, comm[sizeof(current->comm)];
+	char *p;
 	ia64_va va;
 	extern char ia64_leave_kernel[];	/* Need asm address, not function descriptor */
 	const pal_min_state_area_t *ms = sos->pal_min_state;
@@ -721,6 +741,10 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
 	/* Verify the previous stack state before we change it */
 	if (user_mode(regs)) {
 		msg = "occurred in user space";
+		/* previous_current is guaranteed to be valid when the task was
+		 * in user space, so ...
+		 */
+		ia64_mca_modify_comm(previous_current);
 		goto no_mod;
 	}
 	if (r13 != sos->prev_IA64_KR_CURRENT) {
@@ -750,25 +774,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
 		goto no_mod;
 	}
 
-	/* Change the comm field on the MCA/INT task to include the pid that
-	 * was interrupted, it makes for easier debugging.  If that pid was 0
-	 * (swapper or nested MCA/INIT) then use the start of the previous comm
-	 * field suffixed with its cpu.
-	 */
-	if (previous_current->pid)
-		snprintf(comm, sizeof(comm), "%s %d",
-			current->comm, previous_current->pid);
-	else {
-		int l;
-		if ((p = strchr(previous_current->comm, ' ')))
-			l = p - previous_current->comm;
-		else
-			l = strlen(previous_current->comm);
-		snprintf(comm, sizeof(comm), "%s %*s %d",
-			current->comm, l, previous_current->comm,
-			task_thread_info(previous_current)->cpu);
-	}
-	memcpy(current->comm, comm, sizeof(current->comm));
+	ia64_mca_modify_comm(previous_current);
 
 	/* Make the original task look blocked.  First stack a struct pt_regs,
 	 * describing the state at the time of interrupt.  mca_asm.S built a
@@ -908,7 +914,7 @@ no_mod:
 static void
 ia64_wait_for_slaves(int monarch)
 {
-	int c, wait = 0;
+	int c, wait = 0, missing = 0;
 	for_each_online_cpu(c) {
 		if (c == monarch)
 			continue;
@@ -919,15 +925,32 @@ ia64_wait_for_slaves(int monarch)
 		}
 	}
 	if (!wait)
-		return;
+		goto all_in;
 	for_each_online_cpu(c) {
 		if (c == monarch)
 			continue;
 		if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) {
 			udelay(5*1000000);	/* wait 5 seconds for slaves (arbitrary) */
+			if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE)
+				missing = 1;
 			break;
 		}
 	}
+	if (!missing)
+		goto all_in;
+	printk(KERN_INFO "OS MCA slave did not rendezvous on cpu");
+	for_each_online_cpu(c) {
+		if (c == monarch)
+			continue;
+		if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE)
+			printk(" %d", c);
+	}
+	printk("\n");
+	return;
+
+all_in:
+	printk(KERN_INFO "All OS MCA slaves have reached rendezvous\n");
+	return;
 }
 
 /*
@@ -953,6 +976,10 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 	task_t *previous_current;
 
 	oops_in_progress = 1;	/* FIXME: make printk NMI/MCA/INIT safe */
+	console_loglevel = 15;	/* make sure printks make it to console */
+	printk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d monarch=%ld\n",
+		sos->proc_state_param, cpu, sos->monarch);
+
 	previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA");
 	monarch_cpu = cpu;
 	if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0)
@@ -1444,11 +1471,13 @@ void __devinit
 ia64_mca_cpu_init(void *cpu_data)
 {
 	void *pal_vaddr;
+	static int first_time = 1;
 
-	if (smp_processor_id() == 0) {
+	if (first_time) {
 		void *mca_data;
 		int cpu;
 
+		first_time = 0;
 		mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu)
 					 * NR_CPUS + KERNEL_STACK_SIZE);
 		mca_data = (void *)(((unsigned long)mca_data +
@@ -1704,6 +1733,7 @@ ia64_mca_late_init(void)
 					desc = irq_descp(irq);
 					desc->status |= IRQ_PER_CPU;
 					setup_irq(irq, &mca_cpe_irqaction);
+					ia64_cpe_irq = irq;
 				}
 			ia64_mca_register_cpev(cpe_vector);
 			IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n", __FUNCTION__);

arch/ia64/kernel/perfmon.c

@@ -6722,6 +6722,7 @@ __initcall(pfm_init);
 void
 pfm_init_percpu (void)
 {
+	static int first_time=1;
 	/*
 	 * make sure no measurement is active
 	 * (may inherit programmed PMCs from EFI).
@@ -6734,8 +6735,10 @@ pfm_init_percpu (void)
 	 */
 	pfm_unfreeze_pmu();
 
-	if (smp_processor_id() == 0)
+	if (first_time) {
 		register_percpu_irq(IA64_PERFMON_VECTOR, &perfmon_irqaction);
+		first_time=0;
+	}
 
 	ia64_setreg(_IA64_REG_CR_PMV, IA64_PERFMON_VECTOR);
 	ia64_srlz_d();

arch/ia64/kernel/signal.c

@@ -588,104 +588,3 @@ ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall)
 	}
 	return 0;
 }
-
-/* Set a delayed signal that was detected in MCA/INIT/NMI/PMI context where it
- * could not be delivered.  It is important that the target process is not
- * allowed to do any more work in user space.  Possible cases for the target
- * process:
- *
- * - It is sleeping and will wake up soon.  Store the data in the current task,
- *   the signal will be sent when the current task returns from the next
- *   interrupt.
- *
- * - It is running in user context.  Store the data in the current task, the
- *   signal will be sent when the current task returns from the next interrupt.
- *
- * - It is running in kernel context on this or another cpu and will return to
- *   user context.  Store the data in the target task, the signal will be sent
- *   to itself when the target task returns to user space.
- *
- * - It is running in kernel context on this cpu and will sleep before
- *   returning to user context.  Because this is also the current task, the
- *   signal will not get delivered and the task could sleep indefinitely.
- *   Store the data in the idle task for this cpu, the signal will be sent
- *   after the idle task processes its next interrupt.
- *
- * To cover all cases, store the data in the target task, the current task and
- * the idle task on this cpu.  Whatever happens, the signal will be delivered
- * to the target task before it can do any useful user space work.  Multiple
- * deliveries have no unwanted side effects.
- *
- * Note: This code is executed in MCA/INIT/NMI/PMI context, with interrupts
- * disabled.  It must not take any locks nor use kernel structures or services
- * that require locks.
- */
-
-/* To ensure that we get the right pid, check its start time.  To avoid extra
- * include files in thread_info.h, convert the task start_time to unsigned long,
- * giving us a cycle time of > 580 years.
- */
-static inline unsigned long
-start_time_ul(const struct task_struct *t)
-{
-	return t->start_time.tv_sec * NSEC_PER_SEC + t->start_time.tv_nsec;
-}
-
-void
-set_sigdelayed(pid_t pid, int signo, int code, void __user *addr)
-{
-	struct task_struct *t;
-	unsigned long start_time =  0;
-	int i;
-
-	for (i = 1; i <= 3; ++i) {
-		switch (i) {
-		case 1:
-			t = find_task_by_pid(pid);
-			if (t)
-				start_time = start_time_ul(t);
-			break;
-		case 2:
-			t = current;
-			break;
-		default:
-			t = idle_task(smp_processor_id());
-			break;
-		}
-
-		if (!t)
-			return;
-		task_thread_info(t)->sigdelayed.signo = signo;
-		task_thread_info(t)->sigdelayed.code = code;
-		task_thread_info(t)->sigdelayed.addr = addr;
-		task_thread_info(t)->sigdelayed.start_time = start_time;
-		task_thread_info(t)->sigdelayed.pid = pid;
-		wmb();
-		set_tsk_thread_flag(t, TIF_SIGDELAYED);
-	}
-}
-
-/* Called from entry.S when it detects TIF_SIGDELAYED, a delayed signal that
- * was detected in MCA/INIT/NMI/PMI context where it could not be delivered.
- */
-
-void
-do_sigdelayed(void)
-{
-	struct siginfo siginfo;
-	pid_t pid;
-	struct task_struct *t;
-
-	clear_thread_flag(TIF_SIGDELAYED);
-	memset(&siginfo, 0, sizeof(siginfo));
-	siginfo.si_signo = current_thread_info()->sigdelayed.signo;
-	siginfo.si_code = current_thread_info()->sigdelayed.code;
-	siginfo.si_addr = current_thread_info()->sigdelayed.addr;
-	pid = current_thread_info()->sigdelayed.pid;
-	t = find_task_by_pid(pid);
-	if (!t)
-		return;
-	if (current_thread_info()->sigdelayed.start_time != start_time_ul(t))
-		return;
-	force_sig_info(siginfo.si_signo, &siginfo, t);
-}

arch/ia64/kernel/smpboot.c

@@ -70,6 +70,12 @@
 #endif
 
 #ifdef CONFIG_HOTPLUG_CPU
+#ifdef CONFIG_PERMIT_BSP_REMOVE
+#define bsp_remove_ok	1
+#else
+#define bsp_remove_ok	0
+#endif
+
 /*
  * Store all idle threads, this can be reused instead of creating
  * a new thread. Also avoids complicated thread destroy functionality
@@ -104,7 +110,7 @@ struct sal_to_os_boot *sal_state_for_booting_cpu = &sal_boot_rendez_state[0];
 /*
  * ITC synchronization related stuff:
  */
-#define MASTER	0
+#define MASTER	(0)
 #define SLAVE	(SMP_CACHE_BYTES/8)
 
 #define NUM_ROUNDS	64	/* magic value */
@@ -151,6 +157,27 @@ char __initdata no_int_routing;
 
 unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */
 
+#ifdef CONFIG_FORCE_CPEI_RETARGET
+#define CPEI_OVERRIDE_DEFAULT	(1)
+#else
+#define CPEI_OVERRIDE_DEFAULT	(0)
+#endif
+
+unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT;
+
+static int __init
+cmdl_force_cpei(char *str)
+{
+	int value=0;
+
+	get_option (&str, &value);
+	force_cpei_retarget = value;
+
+	return 1;
+}
+
+__setup("force_cpei=", cmdl_force_cpei);
+
 static int __init
 nointroute (char *str)
 {
@@ -161,6 +188,27 @@ nointroute (char *str)
 
 __setup("nointroute", nointroute);
 
+static void fix_b0_for_bsp(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+	int cpuid;
+	static int fix_bsp_b0 = 1;
+
+	cpuid = smp_processor_id();
+
+	/*
+	 * Cache the b0 value on the first AP that comes up
+	 */
+	if (!(fix_bsp_b0 && cpuid))
+		return;
+
+	sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0];
+	printk ("Fixed BSP b0 value from CPU %d\n", cpuid);
+
+	fix_bsp_b0 = 0;
+#endif
+}
+
 void
 sync_master (void *arg)
 {
@@ -327,8 +375,9 @@ smp_setup_percpu_timer (void)
 static void __devinit
 smp_callin (void)
 {
-	int cpuid, phys_id;
+	int cpuid, phys_id, itc_master;
 	extern void ia64_init_itm(void);
+	extern volatile int time_keeper_id;
 
 #ifdef CONFIG_PERFMON
 	extern void pfm_init_percpu(void);
@@ -336,6 +385,7 @@ smp_callin (void)
 
 	cpuid = smp_processor_id();
 	phys_id = hard_smp_processor_id();
+	itc_master = time_keeper_id;
 
 	if (cpu_online(cpuid)) {
 		printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n",
@@ -343,6 +393,8 @@ smp_callin (void)
 		BUG();
 	}
 
+	fix_b0_for_bsp();
+
 	lock_ipi_calllock();
 	cpu_set(cpuid, cpu_online_map);
 	unlock_ipi_calllock();
@@ -365,8 +417,8 @@ smp_callin (void)
 		 * calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls
 		 * local_bh_enable(), which bugs out if irqs are not enabled...
 		 */
-		Dprintk("Going to syncup ITC with BP.\n");
-		ia64_sync_itc(0);
+		Dprintk("Going to syncup ITC with ITC Master.\n");
+		ia64_sync_itc(itc_master);
 	}
 
 	/*
@@ -635,6 +687,47 @@ remove_siblinginfo(int cpu)
 }
 
 extern void fixup_irqs(void);
+
+int migrate_platform_irqs(unsigned int cpu)
+{
+	int new_cpei_cpu;
+	irq_desc_t *desc = NULL;
+	cpumask_t 	mask;
+	int 		retval = 0;
+
+	/*
+	 * dont permit CPEI target to removed.
+	 */
+	if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) {
+		printk ("CPU (%d) is CPEI Target\n", cpu);
+		if (can_cpei_retarget()) {
+			/*
+			 * Now re-target the CPEI to a different processor
+			 */
+			new_cpei_cpu = any_online_cpu(cpu_online_map);
+			mask = cpumask_of_cpu(new_cpei_cpu);
+			set_cpei_target_cpu(new_cpei_cpu);
+			desc = irq_descp(ia64_cpe_irq);
+			/*
+			 * Switch for now, immediatly, we need to do fake intr
+			 * as other interrupts, but need to study CPEI behaviour with
+			 * polling before making changes.
+			 */
+			if (desc) {
+				desc->handler->disable(ia64_cpe_irq);
+				desc->handler->set_affinity(ia64_cpe_irq, mask);
+				desc->handler->enable(ia64_cpe_irq);
+				printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu);
+			}
+		}
+		if (!desc) {
+			printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu);
+			retval = -EBUSY;
+		}
+	}
+	return retval;
+}
+
 /* must be called with cpucontrol mutex held */
 int __cpu_disable(void)
 {
@@ -643,8 +736,17 @@ int __cpu_disable(void)
 	/*
 	 * dont permit boot processor for now
 	 */
-	if (cpu == 0)
-		return -EBUSY;
+	if (cpu == 0 && !bsp_remove_ok) {
+		printk ("Your platform does not support removal of BSP\n");
+		return (-EBUSY);
+	}
+
+	cpu_clear(cpu, cpu_online_map);
+
+	if (migrate_platform_irqs(cpu)) {
+		cpu_set(cpu, cpu_online_map);
+		return (-EBUSY);
+	}
 
 	remove_siblinginfo(cpu);
 	cpu_clear(cpu, cpu_online_map);

arch/ia64/kernel/time.c

@@ -32,7 +32,7 @@
 
 extern unsigned long wall_jiffies;
 
-#define TIME_KEEPER_ID	0	/* smp_processor_id() of time-keeper */
+volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */
 
 #ifdef CONFIG_IA64_DEBUG_IRQ
 
@@ -71,7 +71,7 @@ timer_interrupt (int irq, void *dev_id, struct pt_regs *regs)
 
 		new_itm += local_cpu_data->itm_delta;
 
-		if (smp_processor_id() == TIME_KEEPER_ID) {
+		if (smp_processor_id() == time_keeper_id) {
 			/*
 			 * Here we are in the timer irq handler. We have irqs locally
 			 * disabled, but we don't know if the timer_bh is running on
@@ -236,6 +236,11 @@ static struct irqaction timer_irqaction = {
 	.name =		"timer"
 };
 
+void __devinit ia64_disable_timer(void)
+{
+	ia64_set_itv(1 << 16);
+}
+
 void __init
 time_init (void)
 {

arch/ia64/kernel/topology.c

@@ -36,7 +36,7 @@ int arch_register_cpu(int num)
 	parent = &sysfs_nodes[cpu_to_node(num)];
 #endif /* CONFIG_NUMA */
 
-#ifdef CONFIG_ACPI
+#if defined (CONFIG_ACPI) && defined (CONFIG_HOTPLUG_CPU)
 	/*
 	 * If CPEI cannot be re-targetted, and this is
 	 * CPEI target, then dont create the control file

arch/ia64/mm/contig.c

@@ -181,13 +181,15 @@ per_cpu_init (void)
 {
 	void *cpu_data;
 	int cpu;
+	static int first_time=1;
 
 	/*
 	 * get_free_pages() cannot be used before cpu_init() done.  BSP
 	 * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls
 	 * get_zeroed_page().
 	 */
-	if (smp_processor_id() == 0) {
+	if (first_time) {
+		first_time=0;
 		cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
 					   PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
 		for (cpu = 0; cpu < NR_CPUS; cpu++) {

arch/ia64/mm/discontig.c

@@ -528,12 +528,17 @@ void __init find_memory(void)
 void *per_cpu_init(void)
 {
 	int cpu;
+	static int first_time = 1;
+
 
 	if (smp_processor_id() != 0)
 		return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++)
-		per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
+	if (first_time) {
+		first_time = 0;
+		for (cpu = 0; cpu < NR_CPUS; cpu++)
+			per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
+	}
 
 	return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
 }

arch/ia64/sn/kernel/Makefile

@@ -10,7 +10,8 @@
 CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
 
 obj-y				+= setup.o bte.o bte_error.o irq.o mca.o idle.o \
-				   huberror.o io_init.o iomv.o klconflib.o sn2/
+				   huberror.o io_init.o iomv.o klconflib.o pio_phys.o \
+				   sn2/
 obj-$(CONFIG_IA64_GENERIC)      += machvec.o
 obj-$(CONFIG_SGI_TIOCX)		+= tiocx.o
 obj-$(CONFIG_IA64_SGI_SN_XP)	+= xp.o

arch/ia64/sn/kernel/pio_phys.S

@@ -0,0 +1,71 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ *
+ * This file contains macros used to access MMR registers via
+ * uncached physical addresses.
+ *      pio_phys_read_mmr  - read an MMR
+ *      pio_phys_write_mmr - write an MMR
+ *      pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
+ *              Second MMR will be skipped if address is NULL
+ *
+ * Addresses passed to these routines should be uncached physical addresses
+ * 	ie., 0x80000....
+ */
+
+
+
+#include <asm/asmmacro.h>
+#include <asm/page.h>
+
+GLOBAL_ENTRY(pio_phys_read_mmr)
+	.prologue
+	.regstk 1,0,0,0
+	.body
+	mov r2=psr
+	rsm psr.i | psr.dt
+	;;
+	srlz.d
+	ld8.acq r8=[r32]
+	;;
+	mov psr.l=r2;;
+	srlz.d
+	br.ret.sptk.many rp
+END(pio_phys_read_mmr)
+
+GLOBAL_ENTRY(pio_phys_write_mmr)
+	.prologue
+	.regstk 2,0,0,0
+	.body
+	mov r2=psr
+	rsm psr.i | psr.dt
+	;;
+	srlz.d
+	st8.rel [r32]=r33
+	;;
+	mov psr.l=r2;;
+	srlz.d
+	br.ret.sptk.many rp
+END(pio_phys_write_mmr)
+
+GLOBAL_ENTRY(pio_atomic_phys_write_mmrs)
+	.prologue
+	.regstk 4,0,0,0
+	.body
+	mov r2=psr
+	cmp.ne p9,p0=r34,r0;
+	rsm psr.i | psr.dt | psr.ic
+	;;
+	srlz.d
+	st8.rel [r32]=r33
+(p9)	st8.rel [r34]=r35
+	;;
+	mov psr.l=r2;;
+	srlz.d
+	br.ret.sptk.many rp
+END(pio_atomic_phys_write_mmrs)
+
+

arch/ia64/sn/kernel/setup.c

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All rights reserved.
  */
 
 #include <linux/config.h>
@@ -498,6 +498,7 @@ void __init sn_setup(char **cmdline_p)
 	 * for sn.
 	 */
 	pm_power_off = ia64_sn_power_down;
+	current->thread.flags |= IA64_THREAD_MIGRATION;
 }
 
 /**
@@ -660,7 +661,8 @@ void __init sn_cpu_init(void)
 			SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3};
 		u64 *pio;
 		pio = is_shub1() ? pio1 : pio2;
-		pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]);
+		pda->pio_write_status_addr =
+		   (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, pio[slice]);
 		pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0;
 	}
 

arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -93,6 +93,27 @@ static inline unsigned long wait_piowc(void)
 	return (ws & SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK) != 0;
 }
 
+/**
+ * sn_migrate - SN-specific task migration actions
+ * @task: Task being migrated to new CPU
+ *
+ * SN2 PIO writes from separate CPUs are not guaranteed to arrive in order.
+ * Context switching user threads which have memory-mapped MMIO may cause
+ * PIOs to issue from seperate CPUs, thus the PIO writes must be drained
+ * from the previous CPU's Shub before execution resumes on the new CPU.
+ */
+void sn_migrate(struct task_struct *task)
+{
+	pda_t *last_pda = pdacpu(task_thread_info(task)->last_cpu);
+	volatile unsigned long *adr = last_pda->pio_write_status_addr;
+	unsigned long val = last_pda->pio_write_status_val;
+
+	/* Drain PIO writes from old CPU's Shub */
+	while (unlikely((*adr & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK)
+			!= val))
+		cpu_relax();
+}
+
 void sn_tlb_migrate_finish(struct mm_struct *mm)
 {
 	/* flush_tlb_mm is inefficient if more than 1 users of mm */

arch/ia64/sn/kernel/xpc_channel.c

@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/cache.h>
 #include <linux/interrupt.h>
-#include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/completion.h>
 #include <asm/sn/bte.h>
@@ -29,6 +28,31 @@
 #include <asm/sn/xpc.h>
 
 
+/*
+ * Guarantee that the kzalloc'd memory is cacheline aligned.
+ */
+static void *
+xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+	/* see if kzalloc will give us cachline aligned memory by default */
+	*base = kzalloc(size, flags);
+	if (*base == NULL) {
+		return NULL;
+	}
+	if ((u64) *base == L1_CACHE_ALIGN((u64) *base)) {
+		return *base;
+	}
+	kfree(*base);
+
+	/* nope, we'll have to do it ourselves */
+	*base = kzalloc(size + L1_CACHE_BYTES, flags);
+	if (*base == NULL) {
+		return NULL;
+	}
+	return (void *) L1_CACHE_ALIGN((u64) *base);
+}
+
+
 /*
  * Set up the initial values for the XPartition Communication channels.
  */
@@ -93,20 +117,19 @@ xpc_setup_infrastructure(struct xpc_partition *part)
 	 * Allocate all of the channel structures as a contiguous chunk of
 	 * memory.
 	 */
-	part->channels = kmalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
+	part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
 								GFP_KERNEL);
 	if (part->channels == NULL) {
 		dev_err(xpc_chan, "can't get memory for channels\n");
 		return xpcNoMemory;
 	}
-	memset(part->channels, 0, sizeof(struct xpc_channel) * XPC_NCHANNELS);
 
 	part->nchannels = XPC_NCHANNELS;
 
 
 	/* allocate all the required GET/PUT values */
 
-	part->local_GPs = xpc_kmalloc_cacheline_aligned(XPC_GP_SIZE,
+	part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
 					GFP_KERNEL, &part->local_GPs_base);
 	if (part->local_GPs == NULL) {
 		kfree(part->channels);
@@ -115,55 +138,51 @@ xpc_setup_infrastructure(struct xpc_partition *part)
 			"values\n");
 		return xpcNoMemory;
 	}
-	memset(part->local_GPs, 0, XPC_GP_SIZE);
 
-	part->remote_GPs = xpc_kmalloc_cacheline_aligned(XPC_GP_SIZE,
+	part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
 					GFP_KERNEL, &part->remote_GPs_base);
 	if (part->remote_GPs == NULL) {
-		kfree(part->channels);
-		part->channels = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
 		dev_err(xpc_chan, "can't get memory for remote get/put "
 			"values\n");
+		kfree(part->local_GPs_base);
+		part->local_GPs = NULL;
+		kfree(part->channels);
+		part->channels = NULL;
 		return xpcNoMemory;
 	}
-	memset(part->remote_GPs, 0, XPC_GP_SIZE);
 
 
 	/* allocate all the required open and close args */
 
-	part->local_openclose_args = xpc_kmalloc_cacheline_aligned(
+	part->local_openclose_args = xpc_kzalloc_cacheline_aligned(
 					XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
 					&part->local_openclose_args_base);
 	if (part->local_openclose_args == NULL) {
-		kfree(part->channels);
-		part->channels = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
+		dev_err(xpc_chan, "can't get memory for local connect args\n");
 		kfree(part->remote_GPs_base);
 		part->remote_GPs = NULL;
-		dev_err(xpc_chan, "can't get memory for local connect args\n");
+		kfree(part->local_GPs_base);
+		part->local_GPs = NULL;
+		kfree(part->channels);
+		part->channels = NULL;
 		return xpcNoMemory;
 	}
-	memset(part->local_openclose_args, 0, XPC_OPENCLOSE_ARGS_SIZE);
 
-	part->remote_openclose_args = xpc_kmalloc_cacheline_aligned(
+	part->remote_openclose_args = xpc_kzalloc_cacheline_aligned(
 					XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
 					&part->remote_openclose_args_base);
 	if (part->remote_openclose_args == NULL) {
-		kfree(part->channels);
-		part->channels = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
+		dev_err(xpc_chan, "can't get memory for remote connect args\n");
 		kfree(part->local_openclose_args_base);
 		part->local_openclose_args = NULL;
-		dev_err(xpc_chan, "can't get memory for remote connect args\n");
+		kfree(part->remote_GPs_base);
+		part->remote_GPs = NULL;
+		kfree(part->local_GPs_base);
+		part->local_GPs = NULL;
+		kfree(part->channels);
+		part->channels = NULL;
 		return xpcNoMemory;
 	}
-	memset(part->remote_openclose_args, 0, XPC_OPENCLOSE_ARGS_SIZE);
 
 
 	xpc_initialize_channels(part, partid);
@@ -186,18 +205,18 @@ xpc_setup_infrastructure(struct xpc_partition *part)
 	ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, SA_SHIRQ,
 				part->IPI_owner, (void *) (u64) partid);
 	if (ret != 0) {
-		kfree(part->channels);
-		part->channels = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_openclose_args_base);
-		part->local_openclose_args = NULL;
-		kfree(part->remote_openclose_args_base);
-		part->remote_openclose_args = NULL;
 		dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
 			"errno=%d\n", -ret);
+		kfree(part->remote_openclose_args_base);
+		part->remote_openclose_args = NULL;
+		kfree(part->local_openclose_args_base);
+		part->local_openclose_args = NULL;
+		kfree(part->remote_GPs_base);
+		part->remote_GPs = NULL;
+		kfree(part->local_GPs_base);
+		part->local_GPs = NULL;
+		kfree(part->channels);
+		part->channels = NULL;
 		return xpcLackOfResources;
 	}
 
@@ -446,22 +465,20 @@ xpc_allocate_local_msgqueue(struct xpc_channel *ch)
 	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
 
 		nbytes = nentries * ch->msg_size;
-		ch->local_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes,
+		ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
 						GFP_KERNEL,
 						&ch->local_msgqueue_base);
 		if (ch->local_msgqueue == NULL) {
 			continue;
 		}
-		memset(ch->local_msgqueue, 0, nbytes);
 
 		nbytes = nentries * sizeof(struct xpc_notify);
-		ch->notify_queue = kmalloc(nbytes, GFP_KERNEL);
+		ch->notify_queue = kzalloc(nbytes, GFP_KERNEL);
 		if (ch->notify_queue == NULL) {
 			kfree(ch->local_msgqueue_base);
 			ch->local_msgqueue = NULL;
 			continue;
 		}
-		memset(ch->notify_queue, 0, nbytes);
 
 		spin_lock_irqsave(&ch->lock, irq_flags);
 		if (nentries < ch->local_nentries) {
@@ -501,13 +518,12 @@ xpc_allocate_remote_msgqueue(struct xpc_channel *ch)
 	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
 
 		nbytes = nentries * ch->msg_size;
-		ch->remote_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes,
+		ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
 						GFP_KERNEL,
 						&ch->remote_msgqueue_base);
 		if (ch->remote_msgqueue == NULL) {
 			continue;
 		}
-		memset(ch->remote_msgqueue, 0, nbytes);
 
 		spin_lock_irqsave(&ch->lock, irq_flags);
 		if (nentries < ch->remote_nentries) {

arch/ia64/sn/kernel/xpc_main.c

@@ -52,7 +52,6 @@
 #include <linux/syscalls.h>
 #include <linux/cache.h>
 #include <linux/interrupt.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/completion.h>

arch/ia64/sn/kernel/xpc_partition.c

@@ -80,6 +80,31 @@ char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
 							XP_NASID_MASK_BYTES];
 
 
+/*
+ * Guarantee that the kmalloc'd memory is cacheline aligned.
+ */
+static void *
+xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+	/* see if kmalloc will give us cachline aligned memory by default */
+	*base = kmalloc(size, flags);
+	if (*base == NULL) {
+		return NULL;
+	}
+	if ((u64) *base == L1_CACHE_ALIGN((u64) *base)) {
+		return *base;
+	}
+	kfree(*base);
+
+	/* nope, we'll have to do it ourselves */
+	*base = kmalloc(size + L1_CACHE_BYTES, flags);
+	if (*base == NULL) {
+		return NULL;
+	}
+	return (void *) L1_CACHE_ALIGN((u64) *base);
+}
+
+
 /*
  * Given a nasid, get the physical address of the  partition's reserved page
  * for that nasid. This function returns 0 on any error.
@@ -1038,13 +1063,12 @@ xpc_discovery(void)
 	remote_vars = (struct xpc_vars *) remote_rp;
 
 
-	discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words,
+	discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words,
 							GFP_KERNEL);
 	if (discovered_nasids == NULL) {
 		kfree(remote_rp_base);
 		return;
 	}
-	memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words);
 
 	rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
 

arch/ia64/sn/pci/tioce_provider.c

@@ -15,6 +15,124 @@
 #include <asm/sn/pcidev.h>
 #include <asm/sn/pcibus_provider_defs.h>
 #include <asm/sn/tioce_provider.h>
+#include <asm/sn/sn2/sn_hwperf.h>
+
+/*
+ * 1/26/2006
+ *
+ * WAR for SGI PV 944642.  For revA TIOCE, need to use the following recipe
+ * (taken from the above PV) before and after accessing tioce internal MMR's
+ * to avoid tioce lockups.
+ *
+ * The recipe as taken from the PV:
+ *
+ *	if(mmr address < 0x45000) {
+ *		if(mmr address == 0 or 0x80)
+ *			mmr wrt or read address 0xc0
+ *		else if(mmr address == 0x148 or 0x200)
+ *			mmr wrt or read address 0x28
+ *		else
+ *			mmr wrt or read address 0x158
+ *
+ *		do desired mmr access (rd or wrt)
+ *
+ *		if(mmr address == 0x100)
+ *			mmr wrt or read address 0x38
+ *		mmr wrt or read address 0xb050
+ *	} else
+ *		do desired mmr access
+ *
+ * According to hw, we can use reads instead of writes to the above addres
+ *
+ * Note this WAR can only to be used for accessing internal MMR's in the
+ * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff.  This includes the
+ * "Local CE Registers and Memories" and "PCI Compatible Config Space" address
+ * spaces from table 2-1 of the "CE Programmer's Reference Overview" document.
+ *
+ * All registers defined in struct tioce will meet that criteria.
+ */
+
+static void inline
+tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr)
+{
+	u64 mmr_base;
+	u64 mmr_offset;
+
+	if (kern->ce_common->ce_rev != TIOCE_REV_A)
+		return;
+
+	mmr_base = kern->ce_common->ce_pcibus.bs_base;
+	mmr_offset = (u64)mmr_addr - mmr_base;
+
+	if (mmr_offset < 0x45000) {
+		u64 mmr_war_offset;
+
+		if (mmr_offset == 0 || mmr_offset == 0x80)
+			mmr_war_offset = 0xc0;
+		else if (mmr_offset == 0x148 || mmr_offset == 0x200)
+			mmr_war_offset = 0x28;
+		else
+			mmr_war_offset = 0x158;
+
+		readq_relaxed((void *)(mmr_base + mmr_war_offset));
+	}
+}
+
+static void inline
+tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr)
+{
+	u64 mmr_base;
+	u64 mmr_offset;
+
+	if (kern->ce_common->ce_rev != TIOCE_REV_A)
+		return;
+
+	mmr_base = kern->ce_common->ce_pcibus.bs_base;
+	mmr_offset = (u64)mmr_addr - mmr_base;
+
+	if (mmr_offset < 0x45000) {
+		if (mmr_offset == 0x100)
+			readq_relaxed((void *)(mmr_base + 0x38));
+		readq_relaxed((void *)(mmr_base + 0xb050));
+	}
+}
+
+/* load mmr contents into a variable */
+#define tioce_mmr_load(kern, mmrp, varp) do {\
+	tioce_mmr_war_pre(kern, mmrp); \
+	*(varp) = readq_relaxed(mmrp); \
+	tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store variable contents into mmr */
+#define tioce_mmr_store(kern, mmrp, varp) do {\
+	tioce_mmr_war_pre(kern, mmrp); \
+	writeq(*varp, mmrp); \
+	tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store immediate value into mmr */
+#define tioce_mmr_storei(kern, mmrp, val) do {\
+	tioce_mmr_war_pre(kern, mmrp); \
+	writeq(val, mmrp); \
+	tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* set bits (immediate value) into mmr */
+#define tioce_mmr_seti(kern, mmrp, bits) do {\
+	u64 tmp; \
+	tioce_mmr_load(kern, mmrp, &tmp); \
+	tmp |= (bits); \
+	tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
+
+/* clear bits (immediate value) into mmr */
+#define tioce_mmr_clri(kern, mmrp, bits) do { \
+	u64 tmp; \
+	tioce_mmr_load(kern, mmrp, &tmp); \
+	tmp &= ~(bits); \
+	tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
 
 /**
  * Bus address ranges for the 5 flavors of TIOCE DMA
@@ -62,9 +180,9 @@
 #define TIOCE_ATE_M40	2
 #define TIOCE_ATE_M40S	3
 
-#define KB(x)	((x) << 10)
-#define MB(x)	((x) << 20)
-#define GB(x)	((x) << 30)
+#define KB(x)	((u64)(x) << 10)
+#define MB(x)	((u64)(x) << 20)
+#define GB(x)	((u64)(x) << 30)
 
 /**
  * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode
@@ -151,7 +269,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
 	int last;
 	int entries;
 	int nates;
-	int pagesize;
+	u64 pagesize;
 	u64 *ate_shadow;
 	u64 *ate_reg;
 	u64 addr;
@@ -228,7 +346,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
 
 		ate = ATE_MAKE(addr, pagesize);
 		ate_shadow[i + j] = ate;
-		writeq(ate, &ate_reg[i + j]);
+		tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate);
 		addr += pagesize;
 	}
 
@@ -272,7 +390,8 @@ tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr)
 		u64 tmp;
 
 		ce_kern->ce_port[port].dirmap_shadow = ct_upper;
-		writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
+		tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+				 ct_upper);
 		tmp = ce_mmr->ce_ure_dir_map[port];
 		dma_ok = 1;
 	} else
@@ -344,7 +463,8 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 	if (TIOCE_D32_ADDR(bus_addr)) {
 		if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
 			ce_kern->ce_port[port].dirmap_shadow = 0;
-			writeq(0, &ce_mmr->ce_ure_dir_map[port]);
+			tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+					 0);
 		}
 	} else {
 		struct tioce_dmamap *map;
@@ -365,7 +485,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 		} else if (--map->refcnt == 0) {
 			for (i = 0; i < map->ate_count; i++) {
 				map->ate_shadow[i] = 0;
-				map->ate_hw[i] = 0;
+				tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0);
 			}
 
 			list_del(&map->ce_dmamap_list);
@@ -486,7 +606,7 @@ tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count,
 	spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
 
 dma_map_done:
-	if (mapaddr & barrier)
+	if (mapaddr && barrier)
 		mapaddr = tioce_dma_barrier(mapaddr, 1);
 
 	return mapaddr;
@@ -541,17 +661,61 @@ tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
 			soft->ce_pcibus.bs_persist_segment,
 			soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0);
 
+	if (ret_stuff.v0)
+		panic("tioce_error_intr_handler:  Fatal TIOCE error");
+
 	return IRQ_HANDLED;
 }
 
+/**
+ * tioce_reserve_m32 - reserve M32 ate's for the indicated address range
+ * @tioce_kernel: TIOCE context to reserve ate's for
+ * @base: starting bus address to reserve
+ * @limit: last bus address to reserve
+ *
+ * If base/limit falls within the range of bus space mapped through the
+ * M32 space, reserve the resources corresponding to the range.
+ */
+static void
+tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit)
+{
+	int ate_index, last_ate, ps;
+	struct tioce *ce_mmr;
+
+	if (!TIOCE_M32_ADDR(base))
+		return;
+
+	ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base;
+	ps = ce_kern->ce_ate3240_pagesize;
+	ate_index = ATE_PAGE(base, ps);
+	last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1;
+
+	if (ate_index < 64)
+		ate_index = 64;
+
+	while (ate_index <= last_ate) {
+		u64 ate;
+
+		ate = ATE_MAKE(0xdeadbeef, ps);
+		ce_kern->ce_ate3240_shadow[ate_index] = ate;
+		tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index],
+				 ate);
+		ate_index++;
+	}
+}
+
 /**
  * tioce_kern_init - init kernel structures related to a given TIOCE
  * @tioce_common: ptr to a cached tioce_common struct that originated in prom
- */ static struct tioce_kernel *
+ */
+static struct tioce_kernel *
 tioce_kern_init(struct tioce_common *tioce_common)
 {
 	int i;
+	int ps;
+	int dev;
 	u32 tmp;
+	unsigned int seg, bus;
 	struct tioce *tioce_mmr;
 	struct tioce_kernel *tioce_kern;
 
@@ -572,9 +736,10 @@ tioce_kern_init(struct tioce_common *tioce_common)
 	 * here to use pci_read_config_xxx() so use the raw_pci_ops vector.
 	 */
 
-	raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment,
-			  tioce_common->ce_pcibus.bs_persist_busnum,
-			  PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp);
+	seg = tioce_common->ce_pcibus.bs_persist_segment;
+	bus = tioce_common->ce_pcibus.bs_persist_busnum;
+
+	raw_pci_ops->read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp);
 	tioce_kern->ce_port1_secondary = (u8) tmp;
 
 	/*
@@ -583,18 +748,76 @@ tioce_kern_init(struct tioce_common *tioce_common)
 	 */
 
 	tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
-	__sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK);
-	__sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE);
-	tioce_kern->ce_ate3240_pagesize = KB(256);
+	tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map,
+		       CE_URE_PAGESIZE_MASK);
+	tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map,
+		       CE_URE_256K_PAGESIZE);
+	ps = tioce_kern->ce_ate3240_pagesize = KB(256);
 
 	for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
 		tioce_kern->ce_ate40_shadow[i] = 0;
-		writeq(0, &tioce_mmr->ce_ure_ate40[i]);
+		tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0);
 	}
 
 	for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
 		tioce_kern->ce_ate3240_shadow[i] = 0;
-		writeq(0, &tioce_mmr->ce_ure_ate3240[i]);
+		tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0);
+	}
+
+	/*
+	 * Reserve ATE's corresponding to reserved address ranges.  These
+	 * include:
+	 *
+	 *	Memory space covered by each PPB mem base/limit register
+	 * 	Memory space covered by each PPB prefetch base/limit register
+	 *
+	 * These bus ranges are for pio (downstream) traffic only, and so
+	 * cannot be used for DMA.
+	 */
+
+	for (dev = 1; dev <= 2; dev++) {
+		u64 base, limit;
+
+		/* mem base/limit */
+
+		raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_MEMORY_BASE, 2, &tmp);
+		base = (u64)tmp << 16;
+
+		raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_MEMORY_LIMIT, 2, &tmp);
+		limit = (u64)tmp << 16;
+		limit |= 0xfffffUL;
+
+		if (base < limit)
+			tioce_reserve_m32(tioce_kern, base, limit);
+
+		/*
+		 * prefetch mem base/limit.  The tioce ppb's have 64-bit
+		 * decoders, so read the upper portions w/o checking the
+		 * attributes.
+		 */
+
+		raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_PREF_MEMORY_BASE, 2, &tmp);
+		base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+
+		raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_PREF_BASE_UPPER32, 4, &tmp);
+		base |= (u64)tmp << 32;
+
+		raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_PREF_MEMORY_LIMIT, 2, &tmp);
+
+		limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+		limit |= 0xfffffUL;
+
+		raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_PREF_LIMIT_UPPER32, 4, &tmp);
+		limit |= (u64)tmp << 32;
+
+		if ((base < limit) && TIOCE_M32_ADDR(base))
+			tioce_reserve_m32(tioce_kern, base, limit);
 	}
 
 	return tioce_kern;
@@ -614,6 +837,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
 {
 	struct pcidev_info *pcidev_info;
 	struct tioce_common *ce_common;
+	struct tioce_kernel *ce_kern;
 	struct tioce *ce_mmr;
 	u64 force_int_val;
 
@@ -629,6 +853,29 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
 
 	ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
 	ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base;
+	ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+	/*
+	 * TIOCE Rev A workaround (PV 945826), force an interrupt by writing
+	 * the TIO_INTx register directly (1/26/2006)
+	 */
+	if (ce_common->ce_rev == TIOCE_REV_A) {
+		u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit);
+		u64 status;
+
+		tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status);
+		if (status & int_bit_mask) {
+			u64 force_irq = (1 << 8) | sn_irq_info->irq_irq;
+			u64 ctalk = sn_irq_info->irq_xtalkaddr;
+			u64 nasid, offset;
+
+			nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT;
+			offset = (ctalk & CTALK_NODE_OFFSET);
+			HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq);
+		}
+
+		return;
+	}
 
 	/*
 	 * irq_int_bit is originally set up by prom, and holds the interrupt
@@ -666,7 +913,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
 	default:
 		return;
 	}
-	writeq(force_int_val, &ce_mmr->ce_adm_force_int);
+	tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val);
 }
 
 /**
@@ -685,6 +932,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
 {
 	struct pcidev_info *pcidev_info;
 	struct tioce_common *ce_common;
+	struct tioce_kernel *ce_kern;
 	struct tioce *ce_mmr;
 	int bit;
 	u64 vector;
@@ -695,14 +943,15 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
 
 	ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
 	ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base;
+	ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
 
 	bit = sn_irq_info->irq_int_bit;
 
-	__sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+	tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
 	vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
 	vector |= sn_irq_info->irq_xtalkaddr;
-	writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
-	__sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+	tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector);
+	tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
 
 	tioce_force_interrupt(sn_irq_info);
 }
@@ -721,7 +970,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
 static void *
 tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
 {
+	int my_nasid;
+	cnodeid_t my_cnode, mem_cnode;
 	struct tioce_common *tioce_common;
+	struct tioce_kernel *tioce_kern;
+	struct tioce *tioce_mmr;
 
 	/*
 	 * Allocate kernel bus soft and copy from prom.
@@ -734,11 +987,23 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common));
 	tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET;
 
-	if (tioce_kern_init(tioce_common) == NULL) {
+	tioce_kern = tioce_kern_init(tioce_common);
+	if (tioce_kern == NULL) {
 		kfree(tioce_common);
 		return NULL;
 	}
 
+	/*
+	 * Clear out any transient errors before registering the error
+	 * interrupt handler.
+	 */
+
+	tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
+	tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL);
+	tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias,
+		       ~0ULL);
+	tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, ~0ULL);
+
 	if (request_irq(SGI_PCIASIC_ERROR,
 			tioce_error_intr_handler,
 			SA_SHIRQ, "TIOCE error", (void *)tioce_common))
@@ -750,6 +1015,21 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 		       tioce_common->ce_pcibus.bs_persist_segment,
 		       tioce_common->ce_pcibus.bs_persist_busnum);
 
+	/*
+	 * identify closest nasid for memory allocations
+	 */
+
+	my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base);
+	my_cnode = nasid_to_cnodeid(my_nasid);
+
+	if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) {
+		printk(KERN_WARNING "tioce_bus_fixup: failed to find "
+		       "closest node with MEM to TIO node %d\n", my_cnode);
+		mem_cnode = (cnodeid_t)-1; /* use any node */
+	}
+
+	controller->node = mem_cnode;
+
 	return tioce_common;
 }
 

arch/m68knommu/kernel/vmlinux.lds.S

@@ -269,6 +269,11 @@ SECTIONS {
 		*(__ksymtab_gpl)
 		__stop___ksymtab_gpl = .;
 
+		/* Kernel symbol table: GPL-future symbols */
+		__start___ksymtab_gpl_future = .;
+		*(__ksymtab_gpl_future)
+		__stop___ksymtab_gpl_future = .;
+
 		/* Kernel symbol table: Normal symbols */
 		__start___kcrctab = .;
 		*(__kcrctab)
@@ -279,6 +284,11 @@ SECTIONS {
 		*(__kcrctab_gpl)
 		__stop___kcrctab_gpl = .;
 
+		/* Kernel symbol table: GPL-future symbols */
+		__start___kcrctab_gpl_future = .;
+		*(__kcrctab_gpl_future)
+		__stop___kcrctab_gpl_future = .;
+
 		/* Kernel symbol table: strings */
 		*(__ksymtab_strings)
 

arch/mips/Kconfig

@@ -602,7 +602,7 @@ config SGI_IP32
 	  If you want this kernel to run on SGI O2 workstation, say Y here.
 
 config SIBYTE_BIGSUR
-	bool "Support for Sibyte BigSur"
+	bool "Support for Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select PCI_DOMAINS
@@ -790,6 +790,7 @@ source "arch/mips/tx4927/Kconfig"
 source "arch/mips/tx4938/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/philips/pnx8550/common/Kconfig"
+source "arch/mips/cobalt/Kconfig"
 
 endmenu
 
@@ -1159,6 +1160,7 @@ config CPU_R4X00
 config CPU_TX49XX
 	bool "R49XX"
 	depends on SYS_HAS_CPU_TX49XX
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 
@@ -1581,7 +1583,7 @@ source "mm/Kconfig"
 
 config SMP
 	bool "Multi-Processing support"
-	depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
+	depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/mips/Makefile

@@ -12,10 +12,6 @@
 # for "archclean" cleaning up for this architecture.
 #
 
-as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \
-	     -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \
-	     else echo "$(2)"; fi ;)
-
 cflags-y :=
 
 #
@@ -38,12 +34,10 @@ else
 endif
 
 ifdef CONFIG_32BIT
-gcc-abi			= 32
 tool-prefix		= $(32bit-tool-prefix)
 UTS_MACHINE		:= mips
 endif
 ifdef CONFIG_64BIT
-gcc-abi			= 64
 tool-prefix		= $(64bit-tool-prefix)
 UTS_MACHINE		:= mips64
 endif
@@ -52,37 +46,27 @@ ifdef CONFIG_CROSSCOMPILE
 CROSS_COMPILE		:= $(tool-prefix)
 endif
 
-CHECKFLAGS-y				+= -D__linux__ -D__mips__ \
-					   -D_MIPS_SZINT=32 \
-					   -D_ABIO32=1 \
-					   -D_ABIN32=2 \
-					   -D_ABI64=3
-CHECKFLAGS-$(CONFIG_32BIT)		+= -D_MIPS_SIM=_ABIO32 \
-					   -D_MIPS_SZLONG=32 \
-					   -D_MIPS_SZPTR=32 \
-					   -D__PTRDIFF_TYPE__=int
-CHECKFLAGS-$(CONFIG_64BIT)		+= -m64 -D_MIPS_SIM=_ABI64 \
-					   -D_MIPS_SZLONG=64 \
-					   -D_MIPS_SZPTR=64 \
-					   -D__PTRDIFF_TYPE__="long int"
-CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN)	+= -D__MIPSEB__
-CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -D__MIPSEL__
-
-CHECKFLAGS				= $(CHECKFLAGS-y)
+ifdef CONFIG_32BIT
+ld-emul			= $(32bit-emul)
+vmlinux-32		= vmlinux
+vmlinux-64		= vmlinux.64
+
+cflags-y		+= -mabi=32
+endif
 
-ifdef CONFIG_BUILD_ELF64
-gas-abi			= 64
+ifdef CONFIG_64BIT
 ld-emul			= $(64bit-emul)
 vmlinux-32		= vmlinux.32
 vmlinux-64		= vmlinux
-else
-gas-abi			= 32
-ld-emul			= $(32bit-emul)
-vmlinux-32		= vmlinux
-vmlinux-64		= vmlinux.64
 
-cflags-$(CONFIG_64BIT)	+= $(call cc-option,-mno-explicit-relocs)
+cflags-y		+= -mabi=64
+ifdef CONFIG_BUILD_ELF64
+cflags-y		+= $(call cc-option,-mno-explicit-relocs)
+else
+cflags-y		+= $(call cc-option,-msym32)
 endif
+endif
+
 
 #
 # GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel
@@ -105,162 +89,44 @@ MODFLAGS			+= -mlong-calls
 # carefully avoid to add it redundantly because gcc 3.3/3.4 complains
 # when fed the toolchain default!
 #
-cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB -D__MIPSEB__)
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL -D__MIPSEL__)
 
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
 				   -fno-omit-frame-pointer
 
-#
-# Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>)
-#
-# <cpu0>,<isa0> -- preferred CPU and ISA designations (may require
-#                  recent tools)
-# <cpu1>,<isa1> -- fallback CPU and ISA designations (have to work
-#                  with up to the oldest supported tools)
-# <isa2>        -- an ISA designation used as an ABI selector for
-#                  gcc versions that do not support "-mabi=32"
-#                  (depending on the CPU type, either "mips1" or
-#                  "mips2")
-#
-set_gccflags = $(shell \
-while :; do \
-	cpu=$(1); isa=-$(2); \
-	for gcc_opt in -march= -mcpu=; do \
-		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
-			-xc /dev/null > /dev/null 2>&1 && \
-			break 2; \
-	done; \
-	cpu=$(3); isa=-$(4); \
-	for gcc_opt in -march= -mcpu=; do \
-		$(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
-			-xc /dev/null > /dev/null 2>&1 && \
-			break 2; \
-	done; \
-	break; \
-done; \
-gcc_abi=-mabi=$(gcc-abi); gcc_cpu=$$cpu; \
-if $(CC) $$gcc_abi -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then \
-	gcc_isa=$$isa; \
-else \
-	gcc_abi=; gcc_isa=-$(5); \
-fi; \
-gas_abi=-Wa,-$(gcc-abi); gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
-while :; do \
-	for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
-		$(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
-			-o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
-			break 2; \
-	done; \
-	gas_abi=; gas_opt=; gas_cpu=; gas_isa=; \
-	break; \
-done; \
-if test "$(gcc-abi)" != "$(gas-abi)"; then \
-	gas_abi="-Wa,-$(gas-abi) -Wa,-mgp$(gcc-abi)"; \
-fi; \
-if test "$$gcc_opt" = -march= && test -n "$$gcc_abi"; then \
-	$(CC) $$gcc_abi $$gcc_opt$$gcc_cpu -S -o /dev/null \
-		-xc /dev/null > /dev/null 2>&1 && \
-		gcc_isa=; \
-fi; \
-echo $$gcc_abi $$gcc_opt$$gcc_cpu $$gcc_isa $$gas_abi $$gas_opt$$gas_cpu $$gas_isa)
-
 #
 # CPU-dependent compiler/assembler options for optimization.
 #
-cflags-$(CONFIG_CPU_R3000)	+= \
-			$(call set_gccflags,r3000,mips1,r3000,mips1,mips1)
-CHECKFLAGS-$(CONFIG_CPU_R3000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS1
-
-cflags-$(CONFIG_CPU_TX39XX)	+= \
-			$(call set_gccflags,r3900,mips1,r3000,mips1,mips1)
-CHECKFLAGS-$(CONFIG_CPU_TX39XX)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS1
-
-cflags-$(CONFIG_CPU_R6000)	+= \
-			$(call set_gccflags,r6000,mips2,r6000,mips2,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R6000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS2
-
-cflags-$(CONFIG_CPU_R4300)	+= \
-			$(call set_gccflags,r4300,mips3,r4300,mips3,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R4300)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS3
-
-cflags-$(CONFIG_CPU_VR41XX)	+= \
-			$(call set_gccflags,r4100,mips3,r4600,mips3,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_VR41XX)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS3
-
-cflags-$(CONFIG_CPU_R4X00)	+= \
-			$(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R4X00)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS3
-
-cflags-$(CONFIG_CPU_TX49XX)	+= \
-			$(call set_gccflags,r4600,mips3,r4600,mips3,mips2)  \
+cflags-$(CONFIG_CPU_R3000)	+= -march=r3000
+cflags-$(CONFIG_CPU_TX39XX)	+= -march=r3900
+cflags-$(CONFIG_CPU_R6000)	+= -march=r6000 -Wa,--trap
+cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
+cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
+cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
+cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips2 -mtune=r4600) \
+			-Wa,-mips32 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips2 -mtune=r4600) \
+			-Wa,-mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R1)	+= $(call cc-option,-march=mips64,-mips2 -mtune=r4600) \
+			-Wa,-mips64 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips2 -mtune=r4600 ) \
+			-Wa,-mips64r2 -Wa,--trap
+cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
+cflags-$(CONFIG_CPU_R5432)	+= $(call cc-options,-march=r5400,-march=r5000) \
 			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_TX49XX)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS3
-
-cflags-$(CONFIG_CPU_MIPS32_R1)	+= \
-			$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_MIPS32_R1)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS32
-
-cflags-$(CONFIG_CPU_MIPS32_R2)	+= \
-			$(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
+cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-options,-march=rm5200,-march=r5000) \
 			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_MIPS32_R2)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS32
-
-cflags-$(CONFIG_CPU_MIPS64_R1)	+= \
-			$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
+cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
 			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_MIPS64_R1)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS64
-
-cflags-$(CONFIG_CPU_MIPS64_R2)	+= \
-			$(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
+cflags-$(CONFIG_CPU_RM9000)	+= $(call cc-option,-march=rm9000,-march=r5000) \
 			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_MIPS64_R2)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS64
-
-cflags-$(CONFIG_CPU_R5000)	+= \
-			$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
+cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=r5000) \
 			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R5000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_R5432)	+= \
-			$(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \
+cflags-$(CONFIG_CPU_R8000)	+= -march=r8000 -Wa,--trap
+cflags-$(CONFIG_CPU_R10000)	+= $(call cc-option,-march=r10000,-march=r8000) \
 			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R5432)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_NEVADA)	+= \
-			$(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_NEVADA)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_RM7000)	+= \
-			$(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_RM7000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_RM9000)	+= \
-			$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_RM9000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-
-cflags-$(CONFIG_CPU_SB1)	+= \
-			$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_SB1)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS64
-
-cflags-$(CONFIG_CPU_R8000)	+= \
-			$(call set_gccflags,r8000,mips4,r8000,mips4,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R8000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_R10000)	+= \
-			$(call set_gccflags,r10000,mips4,r8000,mips4,mips2) \
-			-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R10000)	+= -D_MIPS_ISA=_MIPS_ISA_MIPS4
 
 ifdef CONFIG_CPU_SB1
 ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
@@ -630,7 +496,6 @@ endif
 ifdef CONFIG_SGI_IP27
 core-$(CONFIG_SGI_IP27)		+= arch/mips/sgi-ip27/
 cflags-$(CONFIG_SGI_IP27)	+= -Iinclude/asm-mips/mach-ip27
-ifdef CONFIG_BUILD_ELF64
 ifdef CONFIG_MAPPED_KERNEL
 load-$(CONFIG_SGI_IP27)		+= 0xc00000004001c000
 OBJCOPYFLAGS			:= --change-addresses=0x3fffffff80000000
@@ -639,16 +504,6 @@ else
 load-$(CONFIG_SGI_IP27)		+= 0xa80000000001c000
 OBJCOPYFLAGS			:= --change-addresses=0x57ffffff80000000
 endif
-else
-ifdef CONFIG_MAPPED_KERNEL
-load-$(CONFIG_SGI_IP27)		+= 0xffffffffc001c000
-OBJCOPYFLAGS			:= --change-addresses=0xc000000080000000
-dataoffset-$(CONFIG_SGI_IP27)	+= 0x01000000
-else
-load-$(CONFIG_SGI_IP27)		+= 0xffffffff8001c000
-OBJCOPYFLAGS			:= --change-addresses=0xa800000080000000
-endif
-endif
 endif
 
 #
@@ -757,6 +612,12 @@ CFLAGS		+= $(cflags-y)
 
 LDFLAGS			+= -m $(ld-emul)
 
+ifdef CONFIG_MIPS
+CHECKFLAGS += $(shell $(CC) $(CFLAGS) -dM -E -xc /dev/null | \
+	egrep -vw '__GNUC_(MAJOR|MINOR|PATCHLEVEL)__' | \
+	sed -e 's/^\#define /-D/' -e 's/ /="/' -e 's/$$/"/')
+endif
+
 OBJCOPYFLAGS		+= --remove-section=.reginfo
 
 #

arch/mips/au1000/common/cputable.c

@@ -38,7 +38,7 @@ struct cpu_spec	cpu_specs[] = {
     { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
     { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
     { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
-    { 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 },
+    { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
     { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
 };
 

arch/mips/au1000/common/dbdma.c

@@ -214,7 +214,7 @@ au1xxx_ddma_add_device(dbdev_tab_t *dev)
 	if ( NULL != p )
 	{
 		memcpy(p, dev, sizeof(dbdev_tab_t));
- 		p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
+		p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
 		ret = p->dev_id;
 		new_id++;
 #if 0
@@ -260,7 +260,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
 	if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
 	     (stp->dev_flags & DEV_FLAGS_ANYUSE)) {
-	     	/* Got source */
+		/* Got source */
 		stp->dev_flags |= DEV_FLAGS_INUSE;
 		if (!(dtp->dev_flags & DEV_FLAGS_INUSE) ||
 		     (dtp->dev_flags & DEV_FLAGS_ANYUSE)) {

arch/mips/au1000/common/dma.c

@@ -174,7 +174,7 @@ int request_au1000_dma(int dev_id, const char *dev_str,
 		return -EINVAL;
 #else
  	if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
- 		return -EINVAL;
+		return -EINVAL;
 #endif
 
 	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {

arch/mips/au1000/common/platform.c

@@ -20,7 +20,7 @@
 static struct resource au1xxx_usb_ohci_resources[] = {
 	[0] = {
 		.start		= USB_OHCI_BASE,
-		.end		= USB_OHCI_BASE + USB_OHCI_LEN,
+		.end		= USB_OHCI_BASE + USB_OHCI_LEN - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -264,7 +264,7 @@ static struct resource smc91x_resources[] = {
 
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
- 	.id		= -1,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
@@ -278,9 +278,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1100_lcd_device,
 #endif
 #ifdef CONFIG_SOC_AU1200
-#if 0	/* fixme */
 	&au1xxx_usb_ehci_device,
-#endif
 	&au1xxx_usb_gdt_device,
 	&au1xxx_usb_otg_device,
 	&au1200_lcd_device,
@@ -288,7 +286,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xxx_mmc_device,
 #endif
 #ifdef CONFIG_MIPS_DB1200
- 	&smc91x_device,
+	&smc91x_device,
 #endif
 };
 

arch/mips/au1000/common/setup.c

@@ -90,7 +90,7 @@ void __init plat_setup(void)
 	else {
 		/* Clear to obtain best system bus performance */
 		clear_c0_config(1<<19); /* Clear Config[OD] */
- 	}
+	}
 
 	argptr = prom_getcmdline();
 

arch/mips/au1000/common/time.c

@@ -359,7 +359,7 @@ static unsigned long do_fast_cp0_gettimeoffset(void)
 		: "hi", "lo", GCC_REG_ACCUM);
 
 	/*
- 	 * Due to possible jiffies inconsistencies, we need to check
+	 * Due to possible jiffies inconsistencies, we need to check
 	 * the result so that we'll get a timer that is monotonic.
 	 */
 	if (res >= USECS_PER_JIFFY)

arch/mips/cobalt/Kconfig

@@ -0,0 +1,7 @@
+config EARLY_PRINTK
+	bool "Early console support"
+	depends on MIPS_COBALT
+	help
+	  Provide early console support by direct access to the
+	  on board UART. The UART must have been previously
+	  initialised by the boot loader.

arch/mips/cobalt/Makefile

@@ -4,4 +4,6 @@
 
 obj-y	 := irq.o int-handler.o reset.o setup.o
 
+obj-$(CONFIG_EARLY_PRINTK)	+= console.o
+
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips/cobalt/console.c

@@ -0,0 +1,43 @@
+/*
+ * (C) P. Horton 2006
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/serial_reg.h>
+#include <asm/addrspace.h>
+#include <asm/mach-cobalt/cobalt.h>
+
+static void putchar(int c)
+{
+	if(c == '\n')
+		putchar('\r');
+
+	while(!(COBALT_UART[UART_LSR] & UART_LSR_THRE))
+		;
+
+	COBALT_UART[UART_TX] = c;
+}
+
+static void cons_write(struct console *c, const char *s, unsigned n)
+{
+	while(n-- && *s)
+		putchar(*s++);
+}
+
+static struct console cons_info =
+{
+	.name	= "uart",
+	.write	= cons_write,
+	.flags	= CON_PRINTBUFFER | CON_BOOT,
+	.index	= -1,
+};
+
+void __init cobalt_early_console(void)
+{
+	register_console(&cons_info);
+
+	printk("Cobalt: early console registered\n");
+}

arch/mips/cobalt/setup.c

@@ -31,6 +31,7 @@
 extern void cobalt_machine_restart(char *command);
 extern void cobalt_machine_halt(void);
 extern void cobalt_machine_power_off(void);
+extern void cobalt_early_console(void);
 
 int cobalt_board_id;
 
@@ -109,14 +110,6 @@ void __init plat_setup(void)
 	/* I/O port resource must include UART and LCD/buttons */
 	ioport_resource.end = 0x0fffffff;
 
-	/*
-	 * This is a prom style console. We just poke at the
-	 *  UART to make it talk.
-	 * Only use this console if you really screw up and can't
-	 *  get to the stage of setting up a real serial console.
-	 */
-	/*ns16550_setup_console();*/
-
 	/* request I/O space for devices used on all i[345]86 PCs */
 	for (i = 0; i < COBALT_IO_RESOURCES; i++)
 		request_resource(&ioport_resource, cobalt_io_resources + i);
@@ -136,6 +129,10 @@ void __init plat_setup(void)
 #ifdef CONFIG_SERIAL_8250
 	if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
 
+#ifdef CONFIG_EARLY_PRINTK
+		cobalt_early_console();
+#endif
+
 		uart.line	= 0;
 		uart.type	= PORT_UNKNOWN;
 		uart.uartclk	= 18432000;

arch/mips/configs/atlas_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:52 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:52 2006
 #
 CONFIG_MIPS=y
 
@@ -164,26 +164,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -335,6 +337,29 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -353,47 +378,30 @@ CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
 CONFIG_IP_NF_NAT_IRC=m
 CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
@@ -403,13 +411,9 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -419,26 +423,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
@@ -494,6 +492,11 @@ CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -553,7 +556,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -663,7 +665,7 @@ CONFIG_SCSI_LOGGING=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 
@@ -696,13 +698,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -785,6 +781,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -824,6 +821,7 @@ CONFIG_LAN_SAA9730=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -845,8 +843,6 @@ CONFIG_LAN_SAA9730=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -926,6 +922,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -933,7 +930,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -970,6 +966,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -1076,6 +1078,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
@@ -1118,6 +1121,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1225,6 +1229,7 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/bigsur_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:54 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:53 2006
 #
 CONFIG_MIPS=y
 
@@ -169,29 +169,31 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -247,7 +249,6 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_BUILD_ELF64=y
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -309,6 +310,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -457,6 +463,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -478,6 +485,7 @@ CONFIG_MII=y
 CONFIG_NET_SB1250_MAC=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -543,12 +551,15 @@ CONFIG_SERIO_RAW=m
 #
 # CONFIG_VT is not set
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -564,7 +575,6 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -654,6 +664,12 @@ CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -732,12 +748,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -770,6 +786,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -831,18 +848,20 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""

arch/mips/configs/capcella_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:55 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:54 2006
 #
 CONFIG_MIPS=y
 
@@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_NEC_CMBVR4133 is not set
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
 # CONFIG_TANBAC_TB022X is not set
 # CONFIG_VICTOR_MPC30X is not set
 CONFIG_ZAO_CAPCELLA=y
@@ -90,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_VR41XX is not set
 # CONFIG_CPU_R4300 is not set
 # CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
@@ -103,23 +103,18 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
 # CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -155,26 +150,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -190,7 +187,6 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
-# CONFIG_LBD is not set
 
 #
 # IO Schedulers
@@ -228,7 +224,6 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
 
 #
 # Networking
@@ -286,6 +281,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -306,7 +306,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -444,6 +443,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -487,6 +487,7 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -508,8 +509,6 @@ CONFIG_8139TOO_PIO=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -579,11 +578,6 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -599,7 +593,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -608,7 +601,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
-CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -622,6 +614,12 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -704,11 +702,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -741,6 +739,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -803,6 +802,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/cobalt_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:57 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:55 2006
 #
 CONFIG_MIPS=y
 
@@ -150,26 +150,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -271,6 +273,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -291,7 +298,6 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -364,9 +370,38 @@ CONFIG_BLK_DEV_IDEDISK=y
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
@@ -433,11 +468,21 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
 #
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=y
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_PCI is not set
 
@@ -453,6 +498,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -473,8 +519,6 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -550,6 +594,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -557,7 +602,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -594,6 +638,12 @@ CONFIG_COBALT_LCD=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -678,12 +728,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -716,6 +766,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -774,6 +825,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/db1000_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:59 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:56 2006
 #
 CONFIG_MIPS=y
 
@@ -151,26 +151,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -285,6 +288,21 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -312,6 +330,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -320,6 +343,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -332,7 +356,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -395,6 +418,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -512,6 +536,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -625,13 +650,13 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -675,6 +700,12 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -773,6 +804,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -805,6 +837,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -909,6 +942,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -963,3 +997,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/db1100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:00 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:57 2006
 #
 CONFIG_MIPS=y
 
@@ -151,26 +151,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -274,6 +277,21 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -301,6 +319,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -309,6 +332,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -321,7 +345,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -384,6 +407,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -501,6 +525,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -600,13 +625,13 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -643,6 +668,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -772,6 +803,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -804,6 +836,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -908,6 +941,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -962,3 +996,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/db1200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:03 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:58 2006
 #
 CONFIG_MIPS=y
 
@@ -151,27 +151,30 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -279,6 +282,21 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -306,6 +324,11 @@ CONFIG_NETFILTER=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -314,6 +337,7 @@ CONFIG_NETFILTER=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -385,6 +409,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -568,6 +593,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_MIPS_AU1X00_ENET is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -665,13 +691,13 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -715,6 +741,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -842,6 +874,7 @@ CONFIG_JFS_FS=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -881,6 +914,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -990,6 +1024,7 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -1020,3 +1055,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/db1500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:05 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:59 2006
 #
 CONFIG_MIPS=y
 
@@ -153,26 +153,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -293,6 +296,21 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -320,6 +338,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -328,6 +351,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -340,7 +364,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -403,6 +426,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -561,6 +585,7 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -581,6 +606,7 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -601,8 +627,6 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -692,16 +716,15 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -745,6 +768,12 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -788,8 +817,6 @@ CONFIG_SOUND=y
 # Advanced Linux Sound Architecture
 #
 CONFIG_SND=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
 CONFIG_SND_RAWMIDI=m
@@ -799,13 +826,16 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
 #
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_DUMMY is not set
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
@@ -815,6 +845,7 @@ CONFIG_SND_MTPAV=m
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -823,38 +854,38 @@ CONFIG_SND_MTPAV=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # ALSA MIPS devices
@@ -939,12 +970,14 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
@@ -958,6 +991,7 @@ CONFIG_USB_HIDINPUT=y
 CONFIG_USB_YEALINK=m
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1057,6 +1091,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1089,6 +1124,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1193,6 +1229,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -1247,3 +1284,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/db1550_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:07 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:00 2006
 #
 CONFIG_MIPS=y
 
@@ -152,26 +152,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -292,6 +295,21 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -319,6 +337,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -327,6 +350,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -339,7 +363,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -402,6 +425,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -593,6 +617,7 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -613,6 +638,7 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -633,8 +659,6 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -732,16 +756,15 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -785,6 +808,12 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -878,6 +907,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -910,6 +940,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1014,6 +1045,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -1068,3 +1100,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/ddb5476_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:09 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:02 2006
 #
 CONFIG_MIPS=y
 
@@ -151,26 +151,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -276,6 +278,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -296,7 +303,6 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -445,6 +451,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
 #
@@ -469,6 +476,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -489,8 +497,6 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -566,6 +572,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -573,7 +580,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -610,6 +616,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -669,7 +681,6 @@ CONFIG_FB=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
 
@@ -729,11 +740,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -766,6 +777,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -825,6 +837,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ddb5477_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:11 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:02 2006
 #
 CONFIG_MIPS=y
 
@@ -151,26 +151,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -275,6 +277,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -295,7 +302,6 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -414,6 +420,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -453,6 +460,7 @@ CONFIG_PCNET32=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -474,8 +482,6 @@ CONFIG_PCNET32=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -551,6 +557,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -558,7 +565,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -595,6 +601,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -677,11 +689,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -714,6 +726,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -776,6 +789,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/decstation_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:13 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:03 2006
 #
 CONFIG_MIPS=y
 
@@ -150,27 +150,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -278,6 +280,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -298,7 +305,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -436,6 +442,7 @@ CONFIG_CICADA_PHY=m
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_DM9000 is not set
 CONFIG_DECLANCE=y
 
 #
@@ -538,6 +545,12 @@ CONFIG_RTC=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -636,12 +649,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -674,6 +687,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -734,6 +748,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 CONFIG_ULTRIX_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -750,18 +765,20 @@ CONFIG_ULTRIX_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""

arch/mips/configs/e55_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:14 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:04 2006
 #
 CONFIG_MIPS=y
 
@@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_NEC_CMBVR4133 is not set
 CONFIG_CASIO_E55=y
 # CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
 # CONFIG_TANBAC_TB022X is not set
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
@@ -88,7 +88,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_VR41XX is not set
 # CONFIG_CPU_R4300 is not set
 # CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
@@ -101,23 +101,18 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
 # CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -153,26 +148,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -188,7 +185,6 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
-# CONFIG_LBD is not set
 
 #
 # IO Schedulers
@@ -223,7 +219,6 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
 
 #
 # Networking
@@ -278,6 +273,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -298,7 +298,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -433,6 +432,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
@@ -531,10 +531,6 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -563,14 +559,12 @@ CONFIG_WATCHDOG=y
 # CONFIG_WDT is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -584,6 +578,12 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -665,11 +665,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -702,6 +702,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -763,6 +764,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ev64120_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:16 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:05 2006
 #
 CONFIG_MIPS=y
 
@@ -153,26 +153,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -282,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -302,7 +309,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -420,6 +426,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -440,6 +447,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -460,8 +468,6 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -545,6 +551,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -552,7 +559,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -589,6 +595,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -671,11 +683,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -708,6 +720,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -767,6 +780,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ev96100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:18 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:06 2006
 #
 CONFIG_MIPS=y
 
@@ -157,26 +157,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -284,6 +286,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -304,7 +311,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -407,6 +413,7 @@ CONFIG_CICADA_PHY=m
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MIPS_GT96100ETH=y
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -496,6 +503,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -537,6 +545,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -617,11 +631,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -654,6 +668,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -713,6 +728,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ip22_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:20 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:51 2006
 #
 CONFIG_MIPS=y
 
@@ -158,27 +158,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -317,6 +319,28 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -335,39 +359,23 @@ CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -384,13 +392,9 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -400,25 +404,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
@@ -445,6 +444,11 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -504,7 +508,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -641,6 +644,7 @@ CONFIG_CICADA_PHY=m
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_DM9000 is not set
 CONFIG_SGISEEQ=y
 
 #
@@ -786,6 +790,12 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -892,6 +902,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -934,6 +945,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1007,6 +1019,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1062,6 +1075,7 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ip27_defconfig

@@ -132,6 +132,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=64
 CONFIG_PREEMPT_NONE=y
@@ -158,28 +159,30 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -234,7 +237,6 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_BUILD_ELF64=y
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -290,6 +292,10 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_SCTP is not set
 
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -357,7 +363,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -368,7 +373,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -442,7 +447,7 @@ CONFIG_SCSI_LOGGING=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 
@@ -470,13 +475,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -561,6 +560,7 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -581,6 +581,7 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -601,8 +602,6 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -656,6 +655,7 @@ CONFIG_SERIO_RAW=m
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -705,6 +705,12 @@ CONFIG_SGI_IP27_RTC=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -801,6 +807,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -834,6 +841,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -894,6 +902,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -910,6 +919,7 @@ CONFIG_SGI_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ip32_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:24 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:09 2006
 #
 CONFIG_MIPS=y
 
@@ -158,26 +158,28 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -224,7 +226,6 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -286,6 +287,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -306,7 +312,6 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -392,7 +397,7 @@ CONFIG_SCSI_LOGGING=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=y
 
@@ -425,13 +430,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -498,6 +497,7 @@ CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -518,6 +518,7 @@ CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -538,8 +539,6 @@ CONFIG_SGI_O2MACE_ETH=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -617,6 +616,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -624,7 +624,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -661,6 +660,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -743,11 +748,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -780,6 +785,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -835,6 +841,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -851,6 +858,7 @@ CONFIG_SGI_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/it8172_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:26 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:10 2006
 #
 CONFIG_MIPS=y
 
@@ -153,26 +153,29 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -281,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -301,7 +309,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -362,6 +369,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -500,6 +508,7 @@ CONFIG_CICADA_PHY=m
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -593,6 +602,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -634,6 +644,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -728,11 +744,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -765,6 +781,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -826,6 +843,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ivr_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:27 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:11 2006
 #
 CONFIG_MIPS=y
 
@@ -150,26 +150,28 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -280,6 +282,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -300,7 +307,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -440,6 +446,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -460,6 +467,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -480,8 +488,6 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -560,6 +566,7 @@ CONFIG_IT8172_SCR1=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -567,7 +574,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -603,6 +609,12 @@ CONFIG_RTC=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -685,11 +697,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -722,6 +734,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -781,6 +794,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/jaguar-atx_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:29 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:12 2006
 #
 CONFIG_MIPS=y
 
@@ -158,27 +158,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -186,6 +187,7 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
@@ -294,7 +296,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -411,6 +412,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -469,8 +471,6 @@ CONFIG_MV643XX_ETH_2=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -515,6 +515,7 @@ CONFIG_IPW2200=m
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -522,7 +523,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -557,6 +557,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -631,7 +637,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -710,6 +715,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/jmr3927_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:31 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:13 2006
 #
 CONFIG_MIPS=y
 
@@ -148,26 +148,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -272,6 +274,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -292,7 +299,6 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -411,6 +417,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -431,6 +438,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -451,8 +459,6 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -529,6 +535,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
@@ -545,7 +552,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # Non-8250 serial port support
 #
 CONFIG_HAS_TXX9_SERIAL=y
-# CONFIG_SERIAL_JSM is not set
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -582,6 +588,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -641,7 +653,6 @@ CONFIG_FB=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
 
@@ -698,11 +709,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -735,6 +746,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -794,6 +806,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/lasat200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:33 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:14 2006
 #
 CONFIG_MIPS=y
 
@@ -156,26 +156,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -282,6 +285,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -302,7 +310,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -365,6 +372,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -548,6 +556,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -568,6 +577,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -588,8 +598,6 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -665,6 +673,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -672,7 +681,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -709,6 +717,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -801,6 +815,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -833,6 +848,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -895,6 +911,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/malta_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Fri Dec 23 02:21:03 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:15 2006
 #
 CONFIG_MIPS=y
 
@@ -170,26 +170,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -341,6 +343,29 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -359,40 +384,23 @@ CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -409,13 +417,9 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -425,26 +429,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
@@ -500,6 +498,11 @@ CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -559,7 +562,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -734,13 +736,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -823,6 +819,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -862,6 +859,7 @@ CONFIG_PCNET32=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -883,8 +881,6 @@ CONFIG_PCNET32=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -961,6 +957,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -968,7 +965,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -1004,6 +1000,12 @@ CONFIG_RTC=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -1110,6 +1112,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
@@ -1152,6 +1155,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1259,6 +1263,7 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/mipssim_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:37 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:16 2006
 #
 CONFIG_MIPS=y
 
@@ -156,27 +156,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -297,6 +299,11 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -525,6 +532,7 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -566,6 +574,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -640,11 +654,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
 # CONFIG_INOTIFY is not set
@@ -677,6 +691,7 @@ CONFIG_PROC_FS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -738,17 +753,19 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"

arch/mips/configs/mpc30x_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:39 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:17 2006
 #
 CONFIG_MIPS=y
 
@@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_NEC_CMBVR4133 is not set
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
 # CONFIG_TANBAC_TB022X is not set
 CONFIG_VICTOR_MPC30X=y
 # CONFIG_ZAO_CAPCELLA is not set
@@ -90,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_VR41XX is not set
 # CONFIG_CPU_R4300 is not set
 # CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
@@ -103,23 +103,18 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
 # CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -155,26 +150,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -190,7 +187,6 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
-# CONFIG_LBD is not set
 
 #
 # IO Schedulers
@@ -229,7 +225,6 @@ CONFIG_PCMCIA_IOCTL=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-CONFIG_PCMCIA_VRC4173=y
 
 #
 # PCI Hotplug Support
@@ -241,7 +236,6 @@ CONFIG_PCMCIA_VRC4173=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
 
 #
 # Networking
@@ -296,6 +290,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -455,6 +454,7 @@ CONFIG_MII=m
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -604,11 +604,6 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -624,7 +619,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -640,7 +634,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
-CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -654,6 +647,12 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -740,6 +739,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
@@ -762,6 +762,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -846,11 +847,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -883,6 +884,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -941,6 +943,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ocelot_3_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:41 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:18 2006
 #
 CONFIG_MIPS=y
 
@@ -159,27 +159,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -291,6 +293,21 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -324,6 +341,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -332,6 +354,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -344,7 +367,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -426,7 +448,7 @@ CONFIG_SCSI_PROC_FS=y
 # SCSI Transport Attributes
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 
@@ -455,13 +477,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -528,6 +544,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -567,6 +584,7 @@ CONFIG_E100=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -592,8 +610,6 @@ CONFIG_MV643XX_ETH_2=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -675,6 +691,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -682,7 +699,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -718,6 +734,12 @@ CONFIG_RTC=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -777,7 +799,6 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
 
@@ -861,6 +882,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -893,6 +915,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -999,6 +1022,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -1052,3 +1076,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/ocelot_c_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:43 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:19 2006
 #
 CONFIG_MIPS=y
 
@@ -154,26 +154,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -220,7 +222,6 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -281,6 +282,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -301,7 +307,6 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -420,6 +425,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -440,6 +446,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -461,8 +468,6 @@ CONFIG_NET_ETHERNET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -538,6 +543,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -545,7 +551,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -582,6 +587,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -664,11 +675,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -701,6 +712,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -763,6 +775,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ocelot_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:44 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:20 2006
 #
 CONFIG_MIPS=y
 
@@ -159,26 +159,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -280,6 +282,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -300,7 +307,6 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -403,6 +409,7 @@ CONFIG_CICADA_PHY=y
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -492,6 +499,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -533,6 +541,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -613,11 +627,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -650,6 +664,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -712,6 +727,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/ocelot_g_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:46 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:21 2006
 #
 CONFIG_MIPS=y
 
@@ -157,26 +157,28 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -223,7 +225,6 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -284,6 +285,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -304,7 +310,6 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 
 #
 # Device Drivers
@@ -424,6 +429,7 @@ CONFIG_GALILEO_64240_ETH=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -444,6 +450,7 @@ CONFIG_GALILEO_64240_ETH=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -464,8 +471,6 @@ CONFIG_GALILEO_64240_ETH=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
 
 #
 # Wan interfaces
@@ -541,6 +546,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -548,7 +554,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -585,6 +590,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -667,11 +678,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -704,6 +715,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -766,6 +778,7 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y

arch/mips/configs/pb1100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:48 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:22 2006
 #
 CONFIG_MIPS=y
 
@@ -153,26 +153,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -287,6 +290,21 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -314,6 +332,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -322,6 +345,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -334,7 +358,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -397,6 +420,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -514,6 +538,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_MIPS_AU1X00_ENET is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -619,13 +644,13 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -669,6 +694,12 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -767,6 +798,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -799,6 +831,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -903,6 +936,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -957,3 +991,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/pb1500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:50 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:24 2006
 #
 CONFIG_MIPS=y
 
@@ -152,26 +152,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -293,6 +296,21 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -320,6 +338,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -328,6 +351,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -340,7 +364,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -403,6 +426,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -589,6 +613,7 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -609,6 +634,7 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -629,8 +655,6 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -728,16 +752,15 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -781,6 +804,12 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -874,6 +903,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -906,6 +936,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1010,6 +1041,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -1064,3 +1096,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/pb1550_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:52 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:25 2006
 #
 CONFIG_MIPS=y
 
@@ -152,26 +152,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -293,6 +296,21 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -320,6 +338,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -328,6 +351,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -340,7 +364,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -403,6 +426,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -589,6 +613,7 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -609,6 +634,7 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -629,8 +655,6 @@ CONFIG_MIPS_AU1X00_ENET=y
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # PCMCIA network device support
@@ -720,16 +744,15 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -773,6 +796,12 @@ CONFIG_SYNCLINK_CS=m
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -866,6 +895,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -898,6 +928,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1002,6 +1033,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -1056,3 +1088,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/pnx8550-jbs_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:54 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:26 2006
 #
 CONFIG_MIPS=y
 
@@ -151,28 +151,30 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -281,6 +283,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -308,7 +315,7 @@ CONFIG_TCP_CONG_BIC=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
@@ -435,7 +442,7 @@ CONFIG_SCSI_CONSTANTS=y
 # SCSI Transport Attributes
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_ATTRS is not set
 
@@ -464,13 +471,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -528,6 +529,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -571,6 +573,7 @@ CONFIG_8139TOO_8129=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -668,7 +671,6 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_IP3106 is not set
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -705,6 +707,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -801,6 +809,8 @@ CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
@@ -823,6 +833,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -906,11 +917,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -946,6 +957,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1049,18 +1061,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"

arch/mips/configs/pnx8550-v2pci_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:58 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:28 2006
 #
 CONFIG_MIPS=y
 
@@ -152,27 +152,29 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -279,6 +281,21 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -312,6 +329,11 @@ CONFIG_NETFILTER=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -320,6 +342,7 @@ CONFIG_NETFILTER=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -339,7 +362,7 @@ CONFIG_NETFILTER=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -466,7 +489,7 @@ CONFIG_BLK_DEV_SD=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_ATTRS is not set
 
@@ -500,13 +523,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -564,6 +581,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
@@ -607,6 +625,7 @@ CONFIG_8139TOO=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -721,6 +740,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
@@ -737,7 +757,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_IP3106 is not set
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -824,6 +843,12 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -863,6 +888,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
@@ -918,7 +944,6 @@ CONFIG_FB=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
 
@@ -988,13 +1013,16 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
@@ -1008,6 +1036,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1107,6 +1136,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1142,6 +1172,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1246,6 +1277,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -1299,3 +1331,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/qemu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.16-rc2
-# Fri Feb  3 17:14:27 2006
+# Sun Feb 12 19:18:55 2006
 #
 CONFIG_MIPS=y
 
@@ -133,7 +133,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 # CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -145,7 +144,7 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
@@ -222,6 +221,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -476,8 +476,9 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
 
 #
 # IPMI
@@ -627,7 +628,7 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-# CONFIG_SYSFS is not set
+CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
@@ -680,12 +681,13 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS0 debug ip=172.20.0.2:172.20.0.1::255.255.0.0"
+CONFIG_CMDLINE=""
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
 
 #
 # Cryptographic options

arch/mips/configs/rbhma4500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:03 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:30 2006
 #
 CONFIG_MIPS=y
 
@@ -160,27 +160,30 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -291,6 +294,21 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -324,6 +342,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -332,6 +355,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -407,6 +431,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -598,6 +623,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
 #
@@ -654,6 +680,7 @@ CONFIG_NET_PCI=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -687,8 +714,8 @@ CONFIG_NET_RADIO=y
 # Wireless 802.11b ISA/PCI cards support
 #
 # CONFIG_IPW2100 is not set
-# CONFIG_IPW_DEBUG is not set
 CONFIG_IPW2200=m
+# CONFIG_IPW2200_DEBUG is not set
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
 
@@ -795,7 +822,6 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 CONFIG_HAS_TXX9_SERIAL=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -832,6 +858,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -887,7 +919,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_ATY=y
 CONFIG_FB_ATY_CT=y
 # CONFIG_FB_ATY_GENERIC_LCD is not set
-# CONFIG_FB_ATY_XL_INIT is not set
 # CONFIG_FB_ATY_GX is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
@@ -896,7 +927,6 @@ CONFIG_FB_ATY_CT=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
 
@@ -958,12 +988,14 @@ CONFIG_USB=y
 # may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
@@ -977,6 +1009,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB_YEALINK=m
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1078,6 +1111,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1115,6 +1149,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1228,6 +1263,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
@@ -1281,3 +1317,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/mips/configs/rm200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:06 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:31 2006
 #
 CONFIG_MIPS=y
 
@@ -161,27 +161,29 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -297,6 +299,28 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -315,39 +339,23 @@ CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -364,13 +372,9 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -380,26 +384,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
@@ -451,6 +449,11 @@ CONFIG_DECNET=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -530,7 +533,6 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 
 #
 # Device Drivers
@@ -541,7 +543,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -657,7 +659,7 @@ CONFIG_SCSI_CONSTANTS=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 
@@ -678,6 +680,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_MEGARAID_NEWGEN=y
 CONFIG_MEGARAID_MM=m
 CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -704,13 +707,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
@@ -801,6 +798,7 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
 #
@@ -858,6 +856,7 @@ CONFIG_EEPRO100=m
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 CONFIG_VIA_VELOCITY=m
 # CONFIG_TIGON3 is not set
@@ -879,8 +878,6 @@ CONFIG_VIA_VELOCITY=m
 # Wireless LAN (non-hamradio)
 #
 # CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
 
 #
 # Wan interfaces
@@ -969,6 +966,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 # CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -979,7 +977,6 @@ CONFIG_SERIAL_8250_RSA=y
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=m
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -1020,6 +1017,12 @@ CONFIG_RTC=m
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -1123,12 +1126,15 @@ CONFIG_USB_STORAGE_DPCM=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 CONFIG_HID_FF=y
 CONFIG_HID_PID=y
 CONFIG_LOGITECH_FF=y
@@ -1151,6 +1157,7 @@ CONFIG_USB_EGALAX=m
 CONFIG_USB_YEALINK=m
 CONFIG_USB_XPAD=m
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1309,6 +1316,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
@@ -1351,6 +1359,7 @@ CONFIG_SYSFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1432,6 +1441,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1487,6 +1497,7 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y