Merge branch 'late/kirkwood' into late/soc

Merge in the late Kirkwood branch with the OMAP late branch for upstream
submission.

Final contents described in shared tag.

Fixup remove/change conflicts in arch/arm/mach-omap2/devices.c and
drivers/spi/spi-omap2-mcspi.c.

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/arm/Marvell/README

@@ -0,0 +1,232 @@
+ARM Marvell SoCs
+================
+
+This document lists all the ARM Marvell SoCs that are currently
+supported in mainline by the Linux kernel. As the Marvell families of
+SoCs are large and complex, it is hard to understand where the support
+for a particular SoC is available in the Linux kernel. This document
+tries to help in understanding where those SoCs are supported, and to
+match them with their corresponding public datasheet, when available.
+
+Orion family
+------------
+
+  Flavors:
+        88F5082
+        88F5181
+        88F5181L
+        88F5182
+               Datasheet               : http://www.embeddedarm.com/documentation/third-party/MV88F5182-datasheet.pdf
+               Programmer's User Guide : http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf
+               User Manual             : http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf
+        88F5281
+               Datasheet               : http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf
+        88F6183
+  Core: Feroceon ARMv5 compatible
+  Linux kernel mach directory: arch/arm/mach-orion5x
+  Linux kernel plat directory: arch/arm/plat-orion
+
+Kirkwood family
+---------------
+
+  Flavors:
+        88F6282 a.k.a Armada 300
+                Product Brief  : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        88F6283 a.k.a Armada 310
+                Product Brief  : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
+        88F6190
+                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        88F6192
+                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        88F6182
+        88F6180
+                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+        88F6281
+                Product Brief  : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
+  Homepage: http://www.marvell.com/embedded-processors/kirkwood/
+  Core: Feroceon ARMv5 compatible
+  Linux kernel mach directory: arch/arm/mach-kirkwood
+  Linux kernel plat directory: arch/arm/plat-orion
+
+Discovery family
+----------------
+
+  Flavors:
+        MV78100
+                Product Brief  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+        MV78200
+                Product Brief  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf
+                Hardware Spec  : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf
+                Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
+        MV76100
+                Not supported by the Linux kernel.
+
+  Core: Feroceon ARMv5 compatible
+
+  Linux kernel mach directory: arch/arm/mach-mv78xx0
+  Linux kernel plat directory: arch/arm/plat-orion
+
+EBU Armada family
+-----------------
+
+  Armada 370 Flavors:
+        88F6710
+        88F6707
+        88F6W11
+
+  Armada XP Flavors:
+        MV78230
+        MV78260
+        MV78460
+
+  Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
+  No public datasheet available.
+
+  Core: Sheeva ARMv7 compatible
+
+  Linux kernel mach directory: arch/arm/mach-mvebu
+  Linux kernel plat directory: none
+
+Avanta family
+-------------
+
+  Flavors:
+       88F6510
+       88F6530P
+       88F6550
+       88F6560
+  Homepage     : http://www.marvell.com/broadband/
+  Product Brief: http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf
+  No public datasheet available.
+
+  Core: ARMv5 compatible
+
+  Linux kernel mach directory: no code in mainline yet, planned for the future
+  Linux kernel plat directory: no code in mainline yet, planned for the future
+
+Dove family (application processor)
+-----------------------------------
+
+  Flavors:
+        88AP510 a.k.a Armada 510
+                Product Brief   : http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf
+                Hardware Spec   : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf
+                Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf
+  Homepage: http://www.marvell.com/application-processors/armada-500/
+  Core: ARMv7 compatible
+  Directory: arch/arm/mach-dove
+
+PXA 2xx/3xx/93x/95x family
+--------------------------
+
+  Flavors:
+        PXA21x, PXA25x, PXA26x
+             Application processor only
+             Core: ARMv5 XScale core
+        PXA270, PXA271, PXA272
+             Product Brief         : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf
+             Design guide          : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf
+             Developers manual     : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf
+             Specification         : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf
+             Specification update  : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf
+             Application processor only
+             Core: ARMv5 XScale core
+        PXA300, PXA310, PXA320
+             PXA 300 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf
+             PXA 310 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf
+             PXA 320 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf
+             Design guide          : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf
+             Developers manual     : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip
+             Specifications        : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf
+             Specification Update  : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip
+             Reference Manual      : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf
+             Application processor only
+             Core: ARMv5 XScale core
+        PXA930, PXA935
+             Application processor with Communication processor
+             Core: ARMv5 XScale core
+        PXA955
+             Application processor with Communication processor
+             Core: ARMv7 compatible Sheeva PJ4 core
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x,
+      PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while
+      the later PXA95x were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the MMP/MMP2 family of SoCs.
+
+   Linux kernel mach directory: arch/arm/mach-pxa
+   Linux kernel plat directory: arch/arm/plat-pxa
+
+MMP/MMP2 family (communication processor)
+-----------------------------------------
+
+   Flavors:
+        PXA168, a.k.a Armada 168
+             Homepage             : http://www.marvell.com/application-processors/armada-100/armada-168.jsp
+             Product brief        : http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf
+             Hardware manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf
+             Software manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf
+             Specification update : http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf
+             Boot ROM manual      : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf
+             App node package     : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf
+             Application processor only
+             Core: ARMv5 compatible Marvell PJ1 (Mohawk)
+        PXA910
+             Homepage             : http://www.marvell.com/communication-processors/pxa910/
+             Product Brief        : http://www.marvell.com/communication-processors/pxa910/assets/Marvell_PXA910_Platform-001_PB_final.pdf
+             Application processor with Communication processor
+             Core: ARMv5 compatible Marvell PJ1 (Mohawk)
+        MMP2, a.k.a Armada 610
+             Product Brief        : http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf
+             Application processor only
+             Core: ARMv7 compatible Sheeva PJ4 core
+
+   Comments:
+
+    * This line of SoCs originates from the XScale family developed by
+      Intel and acquired by Marvell in ~2006. All the processors of
+      this MMP/MMP2 family were developed by Marvell.
+
+    * Due to their XScale origin, these SoCs have virtually nothing in
+      common with the other (Kirkwood, Dove, etc.) families of Marvell
+      SoCs, except with the PXA family of SoCs listed above.
+
+   Linux kernel mach directory: arch/arm/mach-mmp
+   Linux kernel plat directory: arch/arm/plat-pxa
+
+Long-term plans
+---------------
+
+ * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ and
+   mach-kirkwood/ into the mach-mvebu/ to support all SoCs from the
+   Marvell EBU (Engineering Business Unit) in a single mach-<foo>
+   directory. The plat-orion/ would therefore disappear.
+
+ * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa
+   directory. The plat-pxa/ would therefore disappear.
+
+Credits
+-------
+
+ Maen Suleiman <maen@marvell.com>
+ Lior Amsalem <alior@marvell.com>
+ Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ Andrew Lunn <andrew@lunn.ch>
+ Nicolas Pitre <nico@fluxnic.net>
+ Eric Miao <eric.y.miao@gmail.com>

Documentation/arm/Samsung-S3C24XX/GPIO.txt

@@ -1,4 +1,4 @@
-			S3C2410 GPIO Control
+			S3C24XX GPIO Control
 			====================
 
 Introduction
@@ -12,7 +12,7 @@ Introduction
   of the s3c2410 GPIO system, please read the Samsung provided
   data-sheet/users manual to find out the complete list.
 
-  See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
+  See Documentation/arm/Samsung/GPIO.txt for the core implementation.
 
 
 GPIOLIB
@@ -41,8 +41,8 @@ GPIOLIB
 GPIOLIB conversion
 ------------------
 
-If you need to convert your board or driver to use gpiolib from the exiting
-s3c2410 api, then here are some notes on the process.
+If you need to convert your board or driver to use gpiolib from the phased
+out s3c2410 API, then here are some notes on the process.
 
 1) If your board is exclusively using an GPIO, say to control peripheral
    power, then it will require to claim the gpio with gpio_request() before
@@ -55,7 +55,7 @@ s3c2410 api, then here are some notes on the process.
    as they have the same arguments, and can either take the pin specific
    values, or the more generic special-function-number arguments.
 
-3) s3c2410_gpio_pullup() changs have the problem that whilst the 
+3) s3c2410_gpio_pullup() changes have the problem that whilst the
    s3c2410_gpio_pullup(x, 1) can be easily translated to the
    s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
    are not so easy.
@@ -74,7 +74,7 @@ s3c2410 api, then here are some notes on the process.
    when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
    would return the value the pin is supposed to be outputting).
 
-6) s3c2410_gpio_getirq() should be directly replacable with the
+6) s3c2410_gpio_getirq() should be directly replaceable with the
    gpio_to_irq() call.
 
 The s3c2410_gpio and gpio_ calls have always operated on the same gpio
@@ -105,7 +105,7 @@ PIN Numbers
 -----------
 
   Each pin has an unique number associated with it in regs-gpio.h,
-  eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
+  e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
   With the conversion to gpiolib, there is no longer a direct conversion
@@ -120,31 +120,27 @@ Configuring a pin
   The following function allows the configuration of a given pin to
   be changed.
 
-    void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+    void s3c_gpio_cfgpin(unsigned int pin, unsigned int function);
 
-  Eg:
+  e.g.:
 
-     s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
-     s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+     s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1));
+     s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2));
 
    which would turn GPA(0) into the lowest Address line A0, and set
    GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
-   The s3c_gpio_cfgpin() call is a functional replacement for this call.
-
 
 Reading the current configuration
 ---------------------------------
 
-  The current configuration of a pin can be read by using:
+  The current configuration of a pin can be read by using standard
+  gpiolib function:
 
-  s3c2410_gpio_getcfg(unsigned int pin);
+  s3c_gpio_getcfg(unsigned int pin);
 
   The return value will be from the same set of values which can be
-  passed to s3c2410_gpio_cfgpin().
-
-  The s3c_gpio_getcfg() call should be a functional replacement for
-  this call.
+  passed to s3c_gpio_cfgpin().
 
 
 Configuring a pull-up resistor
@@ -154,61 +150,33 @@ Configuring a pull-up resistor
   pull-up resistors enabled. This can be configured by the following
   function:
 
-    void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-  Where the to value is zero to set the pull-up off, and 1 to enable
-  the specified pull-up. Any other values are currently undefined.
-
-  The s3c_gpio_setpull() offers similar functionality, but with the
-  ability to encode whether the pull is up or down. Currently there
-  is no 'just on' state, so up or down must be selected.
-
-
-Getting the state of a PIN
---------------------------
-
-  The state of a pin can be read by using the function:
-
-    unsigned int s3c2410_gpio_getpin(unsigned int pin);
+    void s3c_gpio_setpull(unsigned int pin, unsigned int to);
 
-  This will return either zero or non-zero. Do not count on this
-  function returning 1 if the pin is set.
+  Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off,
+  and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other
+  values are currently undefined.
 
-  This call is now implemented by the relevant gpiolib calls, convert
-  your board or driver to use gpiolib.
-
-
-Setting the state of a PIN
---------------------------
-
-  The value an pin is outputing can be modified by using the following:
 
-    void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+Getting and setting the state of a PIN
+--------------------------------------
 
-  Which sets the given pin to the value. Use 0 to write 0, and 1 to
-  set the output to 1.
-
-  This call is now implemented by the relevant gpiolib calls, convert
+  These calls are now implemented by the relevant gpiolib calls, convert
   your board or driver to use gpiolib.
 
 
 Getting the IRQ number associated with a PIN
 --------------------------------------------
 
-  The following function can map the given pin number to an IRQ
+  A standard gpiolib function can map the given pin number to an IRQ
   number to pass to the IRQ system.
 
-   int s3c2410_gpio_getirq(unsigned int pin);
+   int gpio_to_irq(unsigned int pin);
 
   Note, not all pins have an IRQ.
 
-  This call is now implemented by the relevant gpiolib calls, convert
-  your board or driver to use gpiolib.
-
 
-Authour
+Author
 -------
 
-
 Ben Dooks, 03 October 2004
 Copyright 2004 Ben Dooks, Simtec Electronics

Documentation/arm/Samsung/GPIO.txt

@@ -5,14 +5,14 @@ Introduction
 ------------
 
 This outlines the Samsung GPIO implementation and the architecture
-specific calls provided alongisde the drivers/gpio core.
+specific calls provided alongside the drivers/gpio core.
 
 
 S3C24XX (Legacy)
 ----------------
 
 See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
-about these devices. Their implementation is being brought into line
+about these devices. Their implementation has been brought into line
 with the core samsung implementation described in this document.
 
 
@@ -29,7 +29,7 @@ GPIO numbering is synchronised between the Samsung and gpiolib system.
 PIN configuration
 -----------------
 
-Pin configuration is specific to the Samsung architecutre, with each SoC
+Pin configuration is specific to the Samsung architecture, with each SoC
 registering the necessary information for the core gpio configuration
 implementation to configure pins as necessary.
 
@@ -38,5 +38,3 @@ driver or machine to change gpio configuration.
 
 See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
 on these functions.
-
-

Documentation/arm/memory.txt

@@ -51,6 +51,9 @@ ffc00000	ffefffff	DMA memory mapping region.  Memory returned
 ff000000	ffbfffff	Reserved for future expansion of DMA
 				mapping region.
 
+fee00000	feffffff	Mapping of PCI I/O space. This is a static
+				mapping within the vmalloc space.
+
 VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.
 				Memory returned by vmalloc/ioremap will
 				be dynamically placed in this region.

Documentation/devicetree/bindings/arm/bcm2835.txt

@@ -0,0 +1,8 @@
+Broadcom BCM2835 device tree bindings
+-------------------------------------------
+
+Boards with the BCM2835 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "brcm,bcm2835";

Documentation/devicetree/bindings/arm/mrvl/tauros2.txt

@@ -0,0 +1,17 @@
+* Marvell Tauros2 Cache
+
+Required properties:
+- compatible : Should be "marvell,tauros2-cache".
+- marvell,tauros2-cache-features : Specify the features supported for the
+  tauros2 cache.
+  The features including
+    CACHE_TAUROS2_PREFETCH_ON       (1 << 0)
+    CACHE_TAUROS2_LINEFILL_BURST8   (1 << 1)
+  The definition can be found at
+  arch/arm/include/asm/hardware/cache-tauros2.h
+
+Example:
+	L2: l2-cache {
+		compatible = "marvell,tauros2-cache";
+		marvell,tauros2-cache-features = <0x3>;
+	};

Documentation/devicetree/bindings/arm/msm/timer.txt

@@ -0,0 +1,38 @@
+* MSM Timer
+
+Properties:
+
+- compatible : Should at least contain "qcom,msm-timer". More specific
+  properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general
+  purpose timer and a debug timer respectively.
+
+- interrupts : Interrupt indicating a match event.
+
+- reg : Specifies the base address of the timer registers. The second region
+  specifies an optional register used to configure the clock divider.
+
+- clock-frequency : The frequency of the timer in Hz.
+
+Optional:
+
+- cpu-offset : per-cpu offset used when the timer is accessed without the
+  CPU remapping facilities. The offset is cpu-offset * cpu-nr.
+
+Example:
+
+       timer@200a004 {
+               compatible = "qcom,msm-gpt", "qcom,msm-timer";
+               interrupts = <1 2 0x301>;
+               reg = <0x0200a004 0x10>;
+               clock-frequency = <32768>;
+               cpu-offset = <0x40000>;
+       };
+
+       timer@200a024 {
+               compatible = "qcom,msm-dgt", "qcom,msm-timer";
+               interrupts = <1 3 0x301>;
+               reg = <0x0200a024 0x10>,
+                     <0x0200a034 0x4>;
+               clock-frequency = <6750000>;
+               cpu-offset = <0x40000>;
+       };

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -36,6 +36,9 @@ Boards:
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3"
 
+- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
+  compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+
 - OMAP4 SDP : Software Developement Board
   compatible = "ti,omap4-sdp", "ti,omap4430"
 

Documentation/devicetree/bindings/arm/pmu.txt

@@ -7,8 +7,12 @@ representation in the device tree should be done as under:-
 Required properties:
 
 - compatible : should be one of
+	"arm,cortex-a15-pmu"
 	"arm,cortex-a9-pmu"
 	"arm,cortex-a8-pmu"
+	"arm,cortex-a7-pmu"
+	"arm,cortex-a5-pmu"
+	"arm,arm11mpcore-pmu"
 	"arm,arm1176-pmu"
 	"arm,arm1136-pmu"
 - interrupts : 1 combined interrupt or 1 per core.

Documentation/devicetree/bindings/clock/imx23-clock.txt

@@ -0,0 +1,76 @@
+* Clock bindings for Freescale i.MX23
+
+Required properties:
+- compatible: Should be "fsl,imx23-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX23
+clocks and IDs.
+
+	Clock		ID
+	------------------
+	ref_xtal	0
+	pll		1
+	ref_cpu		2
+	ref_emi		3
+	ref_pix		4
+	ref_io		5
+	saif_sel	6
+	lcdif_sel	7
+	gpmi_sel	8
+	ssp_sel		9
+	emi_sel		10
+	cpu		11
+	etm_sel		12
+	cpu_pll		13
+	cpu_xtal	14
+	hbus		15
+	xbus		16
+	lcdif_div	17
+	ssp_div		18
+	gpmi_div	19
+	emi_pll		20
+	emi_xtal	21
+	etm_div		22
+	saif_div	23
+	clk32k_div	24
+	rtc		25
+	adc		26
+	spdif_div	27
+	clk32k		28
+	dri		29
+	pwm		30
+	filt		31
+	uart		32
+	ssp		33
+	gpmi		34
+	spdif		35
+	emi		36
+	saif		37
+	lcdif		38
+	etm		39
+	usb		40
+	usb_pwr		41
+
+Examples:
+
+clks: clkctrl@80040000 {
+	compatible = "fsl,imx23-clkctrl";
+	reg = <0x80040000 0x2000>;
+	#clock-cells = <1>;
+	clock-output-names =
+		...
+		"uart",		/* 32 */
+		...
+		"end_of_list";
+};
+
+auart0: serial@8006c000 {
+	compatible = "fsl,imx23-auart";
+	reg = <0x8006c000 0x2000>;
+	interrupts = <24 25 23>;
+	clocks = <&clks 32>;
+	status = "disabled";
+};

Documentation/devicetree/bindings/clock/imx28-clock.txt

@@ -0,0 +1,99 @@
+* Clock bindings for Freescale i.MX28
+
+Required properties:
+- compatible: Should be "fsl,imx28-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX28
+clocks and IDs.
+
+	Clock		ID
+	------------------
+	ref_xtal	0
+	pll0		1
+	pll1		2
+	pll2		3
+	ref_cpu		4
+	ref_emi		5
+	ref_io0		6
+	ref_io1		7
+	ref_pix		8
+	ref_hsadc	9
+	ref_gpmi	10
+	saif0_sel	11
+	saif1_sel	12
+	gpmi_sel	13
+	ssp0_sel	14
+	ssp1_sel	15
+	ssp2_sel	16
+	ssp3_sel	17
+	emi_sel		18
+	etm_sel		19
+	lcdif_sel	20
+	cpu		21
+	ptp_sel		22
+	cpu_pll		23
+	cpu_xtal	24
+	hbus		25
+	xbus		26
+	ssp0_div	27
+	ssp1_div	28
+	ssp2_div	29
+	ssp3_div	30
+	gpmi_div	31
+	emi_pll		32
+	emi_xtal	33
+	lcdif_div	34
+	etm_div		35
+	ptp		36
+	saif0_div	37
+	saif1_div	38
+	clk32k_div	39
+	rtc		40
+	lradc		41
+	spdif_div	42
+	clk32k		43
+	pwm		44
+	uart		45
+	ssp0		46
+	ssp1		47
+	ssp2		48
+	ssp3		49
+	gpmi		50
+	spdif		51
+	emi		52
+	saif0		53
+	saif1		54
+	lcdif		55
+	etm		56
+	fec		57
+	can0		58
+	can1		59
+	usb0		60
+	usb1		61
+	usb0_pwr	62
+	usb1_pwr	63
+	enet_out	64
+
+Examples:
+
+clks: clkctrl@80040000 {
+	compatible = "fsl,imx28-clkctrl";
+	reg = <0x80040000 0x2000>;
+	#clock-cells = <1>;
+	clock-output-names =
+		...
+		"uart",		/* 45 */
+		...
+		"end_of_list";
+};
+
+auart0: serial@8006a000 {
+	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+	reg = <0x8006a000 0x2000>;
+	interrupts = <112 70 71>;
+	clocks = <&clks 45>;
+	status = "disabled";
+};

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -0,0 +1,222 @@
+* Clock bindings for Freescale i.MX6 Quad
+
+Required properties:
+- compatible: Should be "fsl,imx6q-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX6Q
+clocks and IDs.
+
+	Clock			ID
+	---------------------------
+	dummy			0
+	ckil			1
+	ckih			2
+	osc			3
+	pll2_pfd0_352m		4
+	pll2_pfd1_594m		5
+	pll2_pfd2_396m		6
+	pll3_pfd0_720m		7
+	pll3_pfd1_540m		8
+	pll3_pfd2_508m		9
+	pll3_pfd3_454m		10
+	pll2_198m		11
+	pll3_120m		12
+	pll3_80m		13
+	pll3_60m		14
+	twd			15
+	step			16
+	pll1_sw			17
+	periph_pre		18
+	periph2_pre		19
+	periph_clk2_sel		20
+	periph2_clk2_sel	21
+	axi_sel			22
+	esai_sel		23
+	asrc_sel		24
+	spdif_sel		25
+	gpu2d_axi		26
+	gpu3d_axi		27
+	gpu2d_core_sel		28
+	gpu3d_core_sel		29
+	gpu3d_shader_sel	30
+	ipu1_sel		31
+	ipu2_sel		32
+	ldb_di0_sel		33
+	ldb_di1_sel		34
+	ipu1_di0_pre_sel	35
+	ipu1_di1_pre_sel	36
+	ipu2_di0_pre_sel	37
+	ipu2_di1_pre_sel	38
+	ipu1_di0_sel		39
+	ipu1_di1_sel		40
+	ipu2_di0_sel		41
+	ipu2_di1_sel		42
+	hsi_tx_sel		43
+	pcie_axi_sel		44
+	ssi1_sel		45
+	ssi2_sel		46
+	ssi3_sel		47
+	usdhc1_sel		48
+	usdhc2_sel		49
+	usdhc3_sel		50
+	usdhc4_sel		51
+	enfc_sel		52
+	emi_sel			53
+	emi_slow_sel		54
+	vdo_axi_sel		55
+	vpu_axi_sel		56
+	cko1_sel		57
+	periph			58
+	periph2			59
+	periph_clk2		60
+	periph2_clk2		61
+	ipg			62
+	ipg_per			63
+	esai_pred		64
+	esai_podf		65
+	asrc_pred		66
+	asrc_podf		67
+	spdif_pred		68
+	spdif_podf		69
+	can_root		70
+	ecspi_root		71
+	gpu2d_core_podf		72
+	gpu3d_core_podf		73
+	gpu3d_shader		74
+	ipu1_podf		75
+	ipu2_podf		76
+	ldb_di0_podf		77
+	ldb_di1_podf		78
+	ipu1_di0_pre		79
+	ipu1_di1_pre		80
+	ipu2_di0_pre		81
+	ipu2_di1_pre		82
+	hsi_tx_podf		83
+	ssi1_pred		84
+	ssi1_podf		85
+	ssi2_pred		86
+	ssi2_podf		87
+	ssi3_pred		88
+	ssi3_podf		89
+	uart_serial_podf	90
+	usdhc1_podf		91
+	usdhc2_podf		92
+	usdhc3_podf		93
+	usdhc4_podf		94
+	enfc_pred		95
+	enfc_podf		96
+	emi_podf		97
+	emi_slow_podf		98
+	vpu_axi_podf		99
+	cko1_podf		100
+	axi			101
+	mmdc_ch0_axi_podf	102
+	mmdc_ch1_axi_podf	103
+	arm			104
+	ahb			105
+	apbh_dma		106
+	asrc			107
+	can1_ipg		108
+	can1_serial		109
+	can2_ipg		110
+	can2_serial		111
+	ecspi1			112
+	ecspi2			113
+	ecspi3			114
+	ecspi4			115
+	ecspi5			116
+	enet			117
+	esai			118
+	gpt_ipg			119
+	gpt_ipg_per		120
+	gpu2d_core		121
+	gpu3d_core		122
+	hdmi_iahb		123
+	hdmi_isfr		124
+	i2c1			125
+	i2c2			126
+	i2c3			127
+	iim			128
+	enfc			129
+	ipu1			130
+	ipu1_di0		131
+	ipu1_di1		132
+	ipu2			133
+	ipu2_di0		134
+	ldb_di0			135
+	ldb_di1			136
+	ipu2_di1		137
+	hsi_tx			138
+	mlb			139
+	mmdc_ch0_axi		140
+	mmdc_ch1_axi		141
+	ocram			142
+	openvg_axi		143
+	pcie_axi		144
+	pwm1			145
+	pwm2			146
+	pwm3			147
+	pwm4			148
+	per1_bch		149
+	gpmi_bch_apb		150
+	gpmi_bch		151
+	gpmi_io			152
+	gpmi_apb		153
+	sata			154
+	sdma			155
+	spba			156
+	ssi1			157
+	ssi2			158
+	ssi3			159
+	uart_ipg		160
+	uart_serial		161
+	usboh3			162
+	usdhc1			163
+	usdhc2			164
+	usdhc3			165
+	usdhc4			166
+	vdo_axi			167
+	vpu_axi			168
+	cko1			169
+	pll1_sys		170
+	pll2_bus		171
+	pll3_usb_otg		172
+	pll4_audio		173
+	pll5_video		174
+	pll6_mlb		175
+	pll7_usb_host		176
+	pll8_enet		177
+	ssi1_ipg		178
+	ssi2_ipg		179
+	ssi3_ipg		180
+	rom			181
+	usbphy1			182
+	usbphy2			183
+	ldb_di0_div_3_5		184
+	ldb_di1_div_3_5		185
+
+Examples:
+
+clks: ccm@020c4000 {
+	compatible = "fsl,imx6q-ccm";
+	reg = <0x020c4000 0x4000>;
+	interrupts = <0 87 0x04 0 88 0x04>;
+	#clock-cells = <1>;
+	clock-output-names = ...
+			     "uart_ipg",
+			     "uart_serial",
+			     ...;
+};
+
+uart1: serial@02020000 {
+	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+	reg = <0x02020000 0x4000>;
+	interrupts = <0 26 0x04>;
+	clocks = <&clks 160>, <&clks 161>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};

Documentation/devicetree/bindings/crypto/mv_cesa.txt

@@ -0,0 +1,20 @@
+Marvell Cryptographic Engines And Security Accelerator
+
+Required properties:
+- compatible : should be "marvell,orion-crypto"
+- reg : base physical address of the engine and length of memory mapped
+        region, followed by base physical address of sram and its memory
+        length
+- reg-names : "regs" , "sram";
+- interrupts : interrupt number
+
+Examples:
+
+	crypto@30000 {
+		compatible = "marvell,orion-crypto";
+		reg = <0x30000 0x10000>,
+		      <0x4000000 0x800>;
+		reg-names = "regs" , "sram";
+		interrupts = <22>;
+		status = "okay";
+	};

Documentation/devicetree/bindings/gpio/gpio-fan.txt

@@ -0,0 +1,25 @@
+Bindings for fan connected to GPIO lines
+
+Required properties:
+- compatible : "gpio-fan"
+- gpios: Specifies the pins that map to bits in the control value,
+  ordered MSB-->LSB.
+- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
+  control value that should be set to achieve them. This array
+  must have the RPM values in ascending order.
+
+Optional properties:
+- alarm-gpios: This pin going active indicates something is wrong with
+  the fan, and a udev event will be fired.
+
+Examples:
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio1 14 1
+			 &gpio1 13 1>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+		alarm-gpios = <&gpio1 15 1>;
+	};

Documentation/devicetree/bindings/gpio/gpio-mvebu.txt

@@ -0,0 +1,53 @@
+* Marvell EBU GPIO controller
+
+Required properties:
+
+- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio"
+  or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for
+  Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada
+  370. "marvell,mv78200-gpio" should be used for the Discovery
+  MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP
+  SoCs (MV78230, MV78260, MV78460).
+
+- reg: Address and length of the register set for the device. Only one
+  entry is expected, except for the "marvell,armadaxp-gpio" variant
+  for which two entries are expected: one for the general registers,
+  one for the per-cpu registers.
+
+- interrupts: The list of interrupts that are used for all the pins
+  managed by this GPIO bank. There can be more than one interrupt
+  (example: 1 interrupt per 8 pins on Armada XP, which means 4
+  interrupts per bank of 32 GPIOs).
+
+- interrupt-controller: identifies the node as an interrupt controller
+
+- #interrupt-cells: specifies the number of cells needed to encode an
+  interrupt source. Should be two.
+  The first cell is the GPIO number.
+  The second cell is used to specify flags:
+    bits[3:0] trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
+
+- gpio-controller: marks the device node as a gpio controller
+
+- ngpios: number of GPIOs this controller has
+
+- #gpio-cells: Should be two. The first cell is the pin number. The
+  second cell is reserved for flags, unused at the moment.
+
+Example:
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};

Documentation/devicetree/bindings/gpio/gpio-samsung.txt

@@ -39,3 +39,46 @@ Example:
 		#gpio-cells = <4>;
 		gpio-controller;
 	};
+
+
+Samsung S3C24XX GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c24xx-gpio".
+
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+
+- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes
+  should be the following with values derived from the SoC user manual.
+     <[phandle of the gpio controller node]
+      [pin number within the gpio controller]
+      [mux function]
+      [flags and pull up/down]
+
+  Values for gpio specifier:
+  - Pin number: depending on the controller a number from 0 up to 15.
+  - Mux function: Depending on the SoC and the gpio bank the gpio can be set
+                  as input, output or a special function
+  - Flags and Pull Up/Down: the values to use differ for the individual SoCs
+                    example S3C2416/S3C2450:
+                            0 - Pull Up/Down Disabled.
+                            1 - Pull Down Enabled.
+                            2 - Pull Up Enabled.
+          Bit 16 (0x00010000) - Input is active low.
+  Consult the user manual for the correct values of Mux and Pull Up/Down.
+
+- gpio-controller: Specifies that the node is a gpio controller.
+- #address-cells: should be 1.
+- #size-cells: should be 1.
+
+Example:
+
+	gpa: gpio-controller@56000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "samsung,s3c24xx-gpio";
+		reg = <0x56000000 0x10>;
+		#gpio-cells = <3>;
+		gpio-controller;
+	};

Documentation/devicetree/bindings/gpio/gpio-twl4030.txt

@@ -11,6 +11,11 @@ Required properties:
 - interrupt-controller: Mark the device node as an interrupt controller
   The first cell is the GPIO number.
   The second cell is not used.
+- ti,use-leds : Enables LEDA and LEDB outputs if set
+- ti,debounce : if n-th bit is set, debounces GPIO-n
+- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
+- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
+- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
 
 Example:
 
@@ -20,4 +25,5 @@ twl_gpio: gpio {
     gpio-controller;
     #interrupt-cells = <2>;
     interrupt-controller;
+    ti,use-leds;
 };

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -56,3 +56,4 @@ stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
 stm,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
 ti,tsc2003		I2C Touch-Screen Controller
+ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface

Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt

@@ -0,0 +1,110 @@
+BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
+
+The BCM2835 contains a custom top-level interrupt controller, which supports
+72 interrupt sources using a 2-level register scheme. The interrupt
+controller, or the HW block containing it, is referred to occasionally
+as "armctrl" in the SoC documentation, hence naming of this binding.
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-armctrl-ic.txt"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 2.
+
+  The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
+  pending" register, or 1/2 respectively for interrupts in the "IRQ pending
+  1/2" register.
+
+  The 2nd cell contains the interrupt number within the bank. Valid values
+  are 0..7 for bank 0, and 0..31 for bank 1.
+
+The interrupt sources are as follows:
+
+Bank 0:
+0: ARM_TIMER
+1: ARM_MAILBOX
+2: ARM_DOORBELL_0
+3: ARM_DOORBELL_1
+4: VPU0_HALTED
+5: VPU1_HALTED
+6: ILLEGAL_TYPE0
+7: ILLEGAL_TYPE1
+
+Bank 1:
+0: TIMER0
+1: TIMER1
+2: TIMER2
+3: TIMER3
+4: CODEC0
+5: CODEC1
+6: CODEC2
+7: VC_JPEG
+8: ISP
+9: VC_USB
+10: VC_3D
+11: TRANSPOSER
+12: MULTICORESYNC0
+13: MULTICORESYNC1
+14: MULTICORESYNC2
+15: MULTICORESYNC3
+16: DMA0
+17: DMA1
+18: VC_DMA2
+19: VC_DMA3
+20: DMA4
+21: DMA5
+22: DMA6
+23: DMA7
+24: DMA8
+25: DMA9
+26: DMA10
+27: DMA11
+28: DMA12
+29: AUX
+30: ARM
+31: VPUDMA
+
+Bank 2:
+0: HOSTPORT
+1: VIDEOSCALER
+2: CCP2TX
+3: SDC
+4: DSI0
+5: AVE
+6: CAM0
+7: CAM1
+8: HDMI0
+9: HDMI1
+10: PIXELVALVE1
+11: I2CSPISLV
+12: DSI1
+13: PWA0
+14: PWA1
+15: CPR
+16: SMI
+17: GPIO0
+18: GPIO1
+19: GPIO2
+20: GPIO3
+21: VC_I2C
+22: VC_SPI
+23: VC_I2SPCM
+24: VC_SDIO
+25: VC_UART
+26: SLIMBUS
+27: VEC
+28: CPG
+29: RNG
+30: VC_ARASANSDIO
+31: AVSPMON
+
+Example:
+
+intc: interrupt-controller {
+	compatible = "brcm,bcm2835-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};

Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt

@@ -0,0 +1,52 @@
+* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
+
+Required properties:
+- compatible : Should be "jedec,lpddr2-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
+
+Optional properties:
+
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds). Parameters with
+a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
+- tRCD
+- tWR
+- tRAS-min
+- tRRD
+- tWTR
+- tXP
+- tRTP
+- tDQSCK-max
+- tFAW
+- tZQCS
+- tZQinit
+- tRPab
+- tZQCL
+- tCKESR
+- tRAS-max-ns
+- tDQSCK-max-derated
+
+Example:
+
+timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+	compatible	= "jedec,lpddr2-timings";
+	min-freq	= <10000000>;
+	max-freq	= <400000000>;
+	tRPab		= <21000>;
+	tRCD		= <18000>;
+	tWR		= <15000>;
+	tRAS-min	= <42000>;
+	tRRD		= <10000>;
+	tWTR		= <7500>;
+	tXP		= <7500>;
+	tRTP		= <7500>;
+	tCKESR		= <15000>;
+	tDQSCK-max	= <5500>;
+	tFAW		= <50000>;
+	tZQCS		= <90000>;
+	tZQCL		= <360000>;
+	tZQinit		= <1000000>;
+	tRAS-max-ns	= <70000>;
+};

Documentation/devicetree/bindings/lpddr2/lpddr2.txt

@@ -0,0 +1,102 @@
+* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
+
+Required properties:
+- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
+  "jedec,lpddr2-s4"
+
+  "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
+
+  "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
+
+  "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
+
+- density  : <u32> representing density in Mb (Mega bits)
+
+- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
+
+Optional properties:
+
+The following optional properties represent the minimum value of some AC
+timing parameters of the DDR device in terms of number of clock cycles.
+These values shall be obtained from the device data-sheet.
+- tRRD-min-tck
+- tWTR-min-tck
+- tXP-min-tck
+- tRTP-min-tck
+- tCKE-min-tck
+- tRPab-min-tck
+- tRCD-min-tck
+- tWR-min-tck
+- tRASmin-min-tck
+- tCKESR-min-tck
+- tFAW-min-tck
+
+Child nodes:
+- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+  "lpddr2-timings" provides AC timing parameters of the device for
+  a given speed-bin. The user may provide the timings for as many
+  speed-bins as is required. Please see Documentation/devicetree/
+  bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings"
+
+Example:
+
+elpida_ECB240ABACN : lpddr2 {
+	compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+	density		= <2048>;
+	io-width	= <32>;
+
+	tRPab-min-tck	= <3>;
+	tRCD-min-tck	= <3>;
+	tWR-min-tck	= <3>;
+	tRASmin-min-tck	= <3>;
+	tRRD-min-tck	= <2>;
+	tWTR-min-tck	= <2>;
+	tXP-min-tck	= <2>;
+	tRTP-min-tck	= <2>;
+	tCKE-min-tck	= <3>;
+	tCKESR-min-tck	= <3>;
+	tFAW-min-tck	= <8>;
+
+	timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+		compatible	= "jedec,lpddr2-timings";
+		min-freq	= <10000000>;
+		max-freq	= <400000000>;
+		tRPab		= <21000>;
+		tRCD		= <18000>;
+		tWR		= <15000>;
+		tRAS-min	= <42000>;
+		tRRD		= <10000>;
+		tWTR		= <7500>;
+		tXP		= <7500>;
+		tRTP		= <7500>;
+		tCKESR		= <15000>;
+		tDQSCK-max	= <5500>;
+		tFAW		= <50000>;
+		tZQCS		= <90000>;
+		tZQCL		= <360000>;
+		tZQinit		= <1000000>;
+		tRAS-max-ns	= <70000>;
+	};
+
+	timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+		compatible	= "jedec,lpddr2-timings";
+		min-freq	= <10000000>;
+		max-freq	= <200000000>;
+		tRPab		= <21000>;
+		tRCD		= <18000>;
+		tWR		= <15000>;
+		tRAS-min	= <42000>;
+		tRRD		= <10000>;
+		tWTR		= <10000>;
+		tXP		= <7500>;
+		tRTP		= <7500>;
+		tCKESR		= <15000>;
+		tDQSCK-max	= <5500>;
+		tFAW		= <50000>;
+		tZQCS		= <90000>;
+		tZQCL		= <360000>;
+		tZQinit		= <1000000>;
+		tRAS-max-ns	= <70000>;
+	};
+
+}

Documentation/devicetree/bindings/memory-controllers/ti/emif.txt

@@ -0,0 +1,55 @@
+* EMIF family of TI SDRAM controllers
+
+EMIF - External Memory Interface - is an SDRAM controller used in
+TI SoCs. EMIF supports, based on the IP revision, one or more of
+DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
+of the EMIF IP and memory parts attached to it.
+
+Required properties:
+- compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
+  is the IP revision of the specific EMIF instance.
+
+- phy-type	: <u32> indicating the DDR phy type. Following are the
+  allowed values
+  <1>	: Attila PHY
+  <2>	: Intelli PHY
+
+- device-handle	: phandle to a "lpddr2" node representing the memory part
+
+- ti,hwmods	: For TI hwmods processing and omap device creation
+  the value shall be "emif<n>" where <n> is the number of the EMIF
+  instance with base 1.
+
+Optional properties:
+- cs1-used		: Have this property if CS1 of this EMIF
+  instance has a memory part attached to it. If there is a memory
+  part attached to CS1, it should be the same type as the one on CS0,
+  so there is no need to give the details of this memory part.
+
+- cal-resistor-per-cs	: Have this property if the board has one
+  calibration resistor per chip-select.
+
+- hw-caps-read-idle-ctrl: Have this property if the controller
+  supports read idle window programming
+
+- hw-caps-dll-calib-ctrl: Have this property if the controller
+  supports dll calibration control
+
+- hw-caps-ll-interface	: Have this property if the controller
+  has a low latency interface and corresponding interrupt events
+
+- hw-caps-temp-alert	: Have this property if the controller
+  has capability for generating SDRAM temperature alerts
+
+Example:
+
+emif1: emif@0x4c000000 {
+	compatible	= "ti,emif-4d";
+	ti,hwmods	= "emif2";
+	phy-type	= <1>;
+	device-handle	= <&elpida_ECB240ABACN>;
+	cs1-used;
+	hw-caps-read-idle-ctrl;
+	hw-caps-ll-interface;
+	hw-caps-temp-alert;
+};

Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt

@@ -0,0 +1,31 @@
+PXA3xx NAND DT bindings
+
+Required properties:
+
+ - compatible:		Should be "marvell,pxa3xx-nand"
+ - reg: 		The register base for the controller
+ - interrupts:		The interrupt to map
+ - #address-cells:	Set to <1> if the node includes partitions
+
+Optional properties:
+
+ - marvell,nand-enable-arbiter:	Set to enable the bus arbiter
+ - marvell,nand-keep-config:	Set to keep the NAND controller config as set
+				by the bootloader
+ - num-cs:			Number of chipselect lines to usw
+
+Example:
+
+	nand0: nand@43100000 {
+		compatible = "marvell,pxa3xx-nand";
+		reg = <0x43100000 90>;
+		interrupts = <45>;
+		#address-cells = <1>;
+
+		marvell,nand-enable-arbiter;
+		marvell,nand-keep-config;
+		num-cs = <1>;
+
+		/* partitions (optional) */
+	};
+

Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt

@@ -0,0 +1,95 @@
+* Marvell Armada 370 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6710-pinctrl"
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, uart0(rxd)
+mpp1          1        gpo, uart0(txd)
+mpp2          2        gpio, i2c0(sck), uart0(txd)
+mpp3          3        gpio, i2c0(sda), uart0(rxd)
+mpp4          4        gpio, cpu_pd(vdd)
+mpp5          5        gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk)
+mpp6          6        gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
+mpp7          7        gpo, ge0(txd1), tdm(tdx), audio(lrclk)
+mpp8          8        gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
+mpp9          9        gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
+mpp10         10       gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
+mpp11         11       gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1),
+                       sata1(prsnt), spi1(cs1)
+mpp12         12       gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp13         13       gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk),
+                       audio(rmclk)
+mpp14         14       gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi),
+                       spi0(cs2)
+mpp15         15       gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso),
+                       spi0(cs3)
+mpp16         16       gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk)
+mpp17         17       gpo, ge(mdc)
+mpp18         18       gpio, ge(mdio)
+mpp19         19       gpio, ge0(txclk), ge1(txclkout), tdm(pclk)
+mpp20         20       gpo, ge0(txd4), ge1(txd0)
+mpp21         21       gpo, ge0(txd5), ge1(txd1), uart1(txd)
+mpp22         22       gpo, ge0(txd6), ge1(txd2), uart0(rts)
+mpp23         23       gpo, ge0(txd7), ge1(txd3), spi1(mosi)
+mpp24         24       gpio, ge0(col), ge1(txctl), spi1(cs0)
+mpp25         25       gpio, ge0(rxerr), ge1(rxd0), uart1(rxd)
+mpp26         26       gpio, ge0(crs), ge1(rxd1), spi1(miso)
+mpp27         27       gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
+mpp28         28       gpio, ge0(rxd5), ge1(rxd3)
+mpp29         29       gpio, ge0(rxd6), ge1(rxctl), i2c1(sda)
+mpp30         30       gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
+mpp31         31       gpio, tclk, ge0(txerr)
+mpp32         32       gpio, spi0(cs0)
+mpp33         33       gpio, dev(bootcs), spi0(cs0)
+mpp34         34       gpo, dev(wen0), spi0(mosi)
+mpp35         35       gpo, dev(oen), spi0(sck)
+mpp36         36       gpo, dev(a1), spi0(miso)
+mpp37         37       gpo, dev(a0), sata0(prsnt)
+mpp38         38       gpio, dev(ready), uart1(cts), uart0(cts)
+mpp39         39       gpo, dev(ad0), audio(spdifo)
+mpp40         40       gpio, dev(ad1), uart1(rts), uart0(rts)
+mpp41         41       gpio, dev(ad2), uart1(rxd)
+mpp42         42       gpo, dev(ad3), uart1(txd)
+mpp43         43       gpo, dev(ad4), audio(bclk)
+mpp44         44       gpo, dev(ad5), audio(mclk)
+mpp45         45       gpo, dev(ad6), audio(lrclk)
+mpp46         46       gpo, dev(ad7), audio(sdo)
+mpp47         47       gpo, dev(ad8), sd0(clk), audio(spdifo)
+mpp48         48       gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt),
+                       spi0(cs1)
+mpp49         49       gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp50         50       gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso),
+                       audio(rmclk)
+mpp51         51       gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi)
+mpp52         52       gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck)
+mpp53         53       gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2),
+                       pcie(clkreq1)
+mpp54         54       gpo, dev(ad15), tdm(dtx)
+mpp55         55       gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt),
+                       sata0(prsnt)
+mpp56         56       gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3),
+                       pcie(clkreq0), spi1(cs1)
+mpp57         57       gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
+                       audio(sdo)
+mpp58         58       gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
+                       uart0(rts)
+mpp59         59       gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
+mpp60         60       gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out),
+                       audio(sdi)
+mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
+mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
+                       audio(mclk), uart0(cts)
+mpp63         63       gpo, spi0(sck), tclk
+mpp64         64       gpio, spi0(miso), spi0-1(cs1)
+mpp65         65       gpio, spi0(mosi), spi0-1(cs2)

Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt

@@ -0,0 +1,100 @@
+* Marvell Armada XP SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl",
+              "marvell,mv78460-pinctrl"
+
+This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Armada XP (all variants)
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, ge0(txclko), lcd(d0)
+mpp1          1        gpio, ge0(txd0), lcd(d1)
+mpp2          2        gpio, ge0(txd1), lcd(d2)
+mpp3          3        gpio, ge0(txd2), lcd(d3)
+mpp4          4        gpio, ge0(txd3), lcd(d4)
+mpp5          5        gpio, ge0(txctl), lcd(d5)
+mpp6          6        gpio, ge0(rxd0), lcd(d6)
+mpp7          7        gpio, ge0(rxd1), lcd(d7)
+mpp8          8        gpio, ge0(rxd2), lcd(d8)
+mpp9          9        gpio, ge0(rxd3), lcd(d9)
+mpp10         10       gpio, ge0(rxctl), lcd(d10)
+mpp11         11       gpio, ge0(rxclk), lcd(d11)
+mpp12         12       gpio, ge0(txd4), ge1(txd0), lcd(d12)
+mpp13         13       gpio, ge0(txd5), ge1(txd1), lcd(d13)
+mpp14         14       gpio, ge0(txd6), ge1(txd2), lcd(d15)
+mpp15         15       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp16         16       gpio, ge0(txd7), ge1(txd3), lcd(d16)
+mpp17         17       gpio, ge0(col), ge1(txctl), lcd(d17)
+mpp18         18       gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig)
+mpp19         19       gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq)
+mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
+mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
+mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
+mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
+mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
+mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp30         30       gpio, tdm(int1), sd0(clk)
+mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
+mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
+mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
+mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
+mpp36         36       gpio, spi(mosi)
+mpp37         37       gpio, spi(miso)
+mpp38         38       gpio, spi(sck)
+mpp39         39       gpio, spi(cs0)
+mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
+                       pcie(clkreq0)
+mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
+                       pcie(clkreq1)
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
+                       vdd(cpu0-pd)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
+                       vdd(cpu2-3-pd){1}
+mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
+                       mem(bat)
+mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
+mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
+mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
+                       ref(clkout)
+mpp48         48       gpio, tclk, dev(burst/last)
+
+* Marvell Armada XP (mv78260 and mv78460 only)
+
+name          pins     functions
+================================================================================
+mpp49         49       gpio, dev(we3)
+mpp50         50       gpio, dev(we2)
+mpp51         51       gpio, dev(ad16)
+mpp52         52       gpio, dev(ad17)
+mpp53         53       gpio, dev(ad18)
+mpp54         54       gpio, dev(ad19)
+mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
+mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
+mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp58         58       gpio, dev(ad23)
+mpp59         59       gpio, dev(ad24)
+mpp60         60       gpio, dev(ad25)
+mpp61         61       gpio, dev(ad26)
+mpp62         62       gpio, dev(ad27)
+mpp63         63       gpio, dev(ad28)
+mpp64         64       gpio, dev(ad29)
+mpp65         65       gpio, dev(ad30)
+mpp66         66       gpio, dev(ad31)
+
+Notes:
+* {1} vdd(cpu2-3-pd) only available on mv78460.

Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt

@@ -0,0 +1,72 @@
+* Marvell Dove SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,dove-pinctrl"
+- clocks: (optional) phandle of pdma clock
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm)
+mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm)
+mpp2          2        gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
+                       uart1(rts)
+mpp3          3        gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
+                       uart1(cts), lcd-spi(cs1)
+mpp4          4        gpio, pmu, uart3(rts), sdio1(cd), spi1(miso)
+mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs)
+mpp6          6        gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi)
+mpp7          7        gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck)
+mpp8          8        gpio, pmu, watchdog(rstout)
+mpp9          9        gpio, pmu, pex1(clkreq)
+mpp10         10       gpio, pmu, ssp(sclk)
+mpp11         11       gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
+                       sdio1(ledctrl), pex0(clkreq)
+mpp12         12       gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act)
+mpp13         13       gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
+                       ssp(extclk)
+mpp14         14       gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd)
+mpp15         15       gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm)
+mpp16         16       gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
+mpp17         17       gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
+                       ac97-1(sysclko)
+mpp18         18       gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm)
+mpp19         19       gpio, uart3(rxd), sdio0(ledctrl), twsi(sck)
+mpp20         20       gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
+                       ac97(sysclko)
+mpp21         21       gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
+                       uart1(cts), ssp(sfrm)
+mpp22         22       gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi),
+                       lcd-spi(mosi), uart1(cts), ssp(txd)
+mpp23         23       gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck),
+                       lcd-spi(sck), ssp(sclk)
+mpp_camera    24-39    gpio, camera
+mpp_sdio0     40-45    gpio, sdio0
+mpp_sdio1     46-51    gpio, sdio1
+mpp_audio1    52-57    gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
+                       ssp/twsi
+mpp_spi0      58-61    gpio, spi0
+mpp_uart1     62-63    gpio, uart1
+mpp_nand      64-71    gpo, nand
+audio0        -        i2s, ac97
+twsi          -        none, opt1, opt2, opt3
+
+Notes:
+* group "mpp_audio1" allows the following functions and gpio pins:
+  - gpio          : gpio on pins 52-57
+  - i2s1/spdifo   : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
+  - i2s1          : audio1 i2s on pins 52-55, gpio on pins 56,57
+  - spdifo        : spdifo on pin 57, gpio on pins 52-55
+  - twsi          : twsi on pins 56,57, gpio on pins 52-55
+  - ssp/spdifo    : ssp on pins 52-55, spdifo on pin 57, no gpios
+  - ssp           : ssp on pins 52-55, gpio on pins 56,57
+  - ssp/twsi      : ssp on pins 52-55, twsi on pins 56,57, no gpios
+* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated
+  audio0 pins.
+* group "twsi" internally muxes twsi controller to the dedicated or option pins.

Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt

@@ -0,0 +1,279 @@
+* Marvell Kirkwood SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6180-pinctrl",
+              "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
+              "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
+
+This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Kirkwood 88f6180
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, mii(rxerr)
+mpp21         21       gpio, audio(spdifi)
+mpp22         22       gpio, audio(spdifo)
+mpp23         23       gpio, audio(rmclk)
+mpp24         24       gpio, audio(bclk)
+mpp25         25       gpio, audio(sdo)
+mpp26         26       gpio, audio(lrclk)
+mpp27         27       gpio, audio(mclk)
+mpp28         28       gpio, audio(sdi)
+mpp29         29       gpio, audio(extclk)
+
+* Marvell Kirkwood 88f6190
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0)
+mpp21         21       gpio, ge1(txd1), sata0(act)
+mpp22         22       gpio, ge1(txd2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt)
+mpp24         24       gpio, ge1(rxd0)
+mpp25         25       gpio, ge1(rxd1)
+mpp26         26       gpio, ge1(rxd2)
+mpp27         27       gpio, ge1(rxd3)
+mpp28         28       gpio, ge1(col)
+mpp29         29       gpio, ge1(txclk)
+mpp30         30       gpio, ge1(rxclk)
+mpp31         31       gpio, ge1(rxclk)
+mpp32         32       gpio, ge1(txclko)
+mpp33         33       gpo, ge1(txclk)
+mpp34         34       gpio, ge1(txen)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr)
+
+* Marvell Kirkwood 88f6192
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+
+* Marvell Kirkwood 88f6281
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpio, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk)
+mpp45         45       gpio, ts(mp9), tdm(pclk)
+mpp46         46       gpio, ts(mp10), tdm(fs)
+mpp47         47       gpio, ts(mp11), tdm(drx)
+mpp48         48       gpio, ts(mp12), tdm(dtx)
+mpp49         49       gpio, ts(mp9), tdm(rx0ql), ptp(clk)
+
+* Marvell Kirkwood 88f6282
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync)
+mpp5          5        gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync)
+mpp6          6        sysrst(out), spi(mosi)
+mpp7          7        gpo, spi(cs), lcd(pwm)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col),
+                       mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs),
+                       sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), sata0(act)
+mpp12         12       gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda)
+mpp13         13       gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt),
+                       audio(spdifi), audio-1(sdi)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act),
+                       spi(cs)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act), lcd(extclk)
+mpp17         17       gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck)
+mpp18         18       gpo, nand(io0), pex(clkreq)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act), lcd(d0)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo), lcd(d1)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt), lcd(d2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk), lcd(d3)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo),
+                       lcd(d4)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk),
+                       lcd(d5)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk),
+                       lcd(d6)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi),
+                       lcd(d7)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk),
+                       lcd(d8)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12)
+mpp33         33       gpo, ge1(txclk), tdm(drx), lcd(d13)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql),
+                       lcd(d15)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk)
+mpp45         45       gpio, ts(mp9), tdm(pclk), lcd(e)
+mpp46         46       gpio, ts(mp10), tdm(fs), lcd(hsync)
+mpp47         47       gpio, ts(mp11), tdm(drx), lcd(vsync)
+mpp48         48       gpio, ts(mp12), tdm(dtx), lcd(d16)
+mpp49         49       gpo, tdm(rx0ql), pex(clkreq), lcd(d17)

Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt

@@ -0,0 +1,46 @@
+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+  Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing a function to mux to for all
+    marvell,pins given in this pin configuration node. The function has to be
+    common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+    valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial@12100 {
+	compatible = "ns16550a";
+	reg = <0x12100 0x100>;
+	reg-shift = <2>;
+	interrupts = <7>;
+
+	pinctrl-0 = <&pmx_uart1_sw>;
+	pinctrl-names = "default";
+};
+
+pinctrl: pinctrl@d0200 {
+	compatible = "marvell,dove-pinctrl";
+	reg = <0xd0200 0x20>;
+
+	pmx_uart1_sw: pmx-uart1-sw {
+		marvell,pins = "mpp_uart1";
+		marvell,function = "uart1";
+	};
+};

Documentation/devicetree/bindings/regulator/tps6586x.txt

@@ -8,7 +8,8 @@ Required properties:
 - gpio-controller: mark the device as a GPIO controller
 - regulators: list of regulators provided by this controller, must have
   property "regulator-compatible" to match their hardware counterparts:
-  sm[0-2], ldo[0-9] and ldo_rtc
+  sys, sm[0-2], ldo[0-9] and ldo_rtc
+- sys-supply: The input supply for SYS.
 - vin-sm0-supply: The input supply for the SM0.
 - vin-sm1-supply: The input supply for the SM1.
 - vin-sm2-supply: The input supply for the SM2.
@@ -20,6 +21,9 @@ Required properties:
 
 Each regulator is defined using the standard binding for regulators.
 
+Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver
+      take care of making proper parent child relationship.
+
 Example:
 
 	pmu: tps6586x@34 {
@@ -30,6 +34,7 @@ Example:
 		#gpio-cells = <2>;
 		gpio-controller;
 
+		sys-supply = <&some_reg>;
 		vin-sm0-supply = <&some_reg>;
 		vin-sm1-supply = <&some_reg>;
 		vin-sm2-supply = <&some_reg>;
@@ -43,8 +48,16 @@ Example:
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			sm0_reg: regulator@0 {
+			sys_reg: regulator@0 {
 				reg = <0>;
+				regulator-compatible = "sys";
+				regulator-name = "vdd_sys";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sm0_reg: regulator@1 {
+				reg = <1>;
 				regulator-compatible = "sm0";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
@@ -52,8 +65,8 @@ Example:
 				regulator-always-on;
 			};
 
-			sm1_reg: regulator@1 {
-				reg = <1>;
+			sm1_reg: regulator@2 {
+				reg = <2>;
 				regulator-compatible = "sm1";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
@@ -61,8 +74,8 @@ Example:
 				regulator-always-on;
 			};
 
-			sm2_reg: regulator@2 {
-				reg = <2>;
+			sm2_reg: regulator@3 {
+				reg = <3>;
 				regulator-compatible = "sm2";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <4550000>;
@@ -70,72 +83,72 @@ Example:
 				regulator-always-on;
 			};
 
-			ldo0_reg: regulator@3 {
-				reg = <3>;
+			ldo0_reg: regulator@4 {
+				reg = <4>;
 				regulator-compatible = "ldo0";
 				regulator-name = "PCIE CLK";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo1_reg: regulator@4 {
-				reg = <4>;
+			ldo1_reg: regulator@5 {
+				reg = <5>;
 				regulator-compatible = "ldo1";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 			};
 
-			ldo2_reg: regulator@5 {
-				reg = <5>;
+			ldo2_reg: regulator@6 {
+				reg = <6>;
 				regulator-compatible = "ldo2";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 			};
 
-			ldo3_reg: regulator@6 {
-				reg = <6>;
+			ldo3_reg: regulator@7 {
+				reg = <7>;
 				regulator-compatible = "ldo3";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo4_reg: regulator@7 {
-				reg = <7>;
+			ldo4_reg: regulator@8 {
+				reg = <8>;
 				regulator-compatible = "ldo4";
 				regulator-min-microvolt = <1700000>;
 				regulator-max-microvolt = <2475000>;
 			};
 
-			ldo5_reg: regulator@8 {
-				reg = <8>;
+			ldo5_reg: regulator@9 {
+				reg = <9>;
 				regulator-compatible = "ldo5";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo6_reg: regulator@9 {
-				reg = <9>;
+			ldo6_reg: regulator@10 {
+				reg = <10>;
 				regulator-compatible = "ldo6";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo7_reg: regulator@10 {
-				reg = <10>;
+			ldo7_reg: regulator@11 {
+				reg = <11>;
 				regulator-compatible = "ldo7";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo8_reg: regulator@11 {
-				reg = <11>;
+			ldo8_reg: regulator@12 {
+				reg = <12>;
 				regulator-compatible = "ldo8";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo9_reg: regulator@12 {
-				reg = <12>;
+			ldo9_reg: regulator@13 {
+				reg = <13>;
 				regulator-compatible = "ldo9";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;

Documentation/devicetree/bindings/rtc/pxa-rtc.txt

@@ -0,0 +1,14 @@
+* PXA RTC
+
+PXA specific RTC driver.
+
+Required properties:
+- compatible : Should be "marvell,pxa-rtc"
+
+Examples:
+
+rtc@40900000 {
+	compatible = "marvell,pxa-rtc";
+	reg = <0x40900000 0x3c>;
+	interrupts = <30 31>;
+};

Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt

@@ -0,0 +1,22 @@
+BCM2835 System Timer
+
+The System Timer peripheral provides four 32-bit timer channels and a
+single 64-bit free running counter. Each channel has an output compare
+register, which is compared against the 32 least significant bits of the
+free running counter values, and generates an interrupt.
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-system-timer.txt"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupt sinks; one per timer channel.
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+	compatible = "brcm,bcm2835-system-timer";
+	reg = <0x7e003000 0x1000>;
+	interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+	clock-frequency = <1000000>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -10,6 +10,7 @@ apm	Applied Micro Circuits Corporation (APM)
 arm	ARM Ltd.
 atmel	Atmel Corporation
 bosch	Bosch Sensortec GmbH
+brcm	Broadcom Corporation
 cavium	Cavium, Inc.
 chrp	Common Hardware Reference Platform
 cortina	Cortina Systems, Inc.

Documentation/spi/ep93xx_spi

@@ -26,7 +26,7 @@ arch/arm/mach-ep93xx/ts72xx.c:
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 
-#include <mach/ep93xx_spi.h>
+#include <linux/platform_data/spi-ep93xx.h>
 
 /* this is our GPIO line used for chip select */
 #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9

MAINTAINERS

@@ -595,7 +595,6 @@ M:	Will Deacon <will.deacon@arm.com>
 S:	Maintained
 F:	arch/arm/kernel/perf_event*
 F:	arch/arm/oprofile/common.c
-F:	arch/arm/kernel/pmu.c
 F:	arch/arm/include/asm/pmu.h
 F:	arch/arm/kernel/hw_breakpoint.c
 F:	arch/arm/include/asm/hw_breakpoint.h
@@ -1613,6 +1612,16 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
+BROADCOM BCM2835 ARM ARCHICTURE
+M:	Stephen Warren <swarren@wwwdotorg.org>
+L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
+S:	Maintained
+F:	arch/arm/mach-bcm2835/
+F:	arch/arm/boot/dts/bcm2835*
+F:	arch/arm/configs/bcm2835_defconfig
+F:	drivers/*/*bcm2835*
+
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 M:	Matt Carlson <mcarlson@broadcom.com>
 M:	Michael Chan <mchan@broadcom.com>

arch/arm/Kconfig

@@ -202,6 +202,13 @@ config ARM_PATCH_PHYS_VIRT
 	  this feature (eg, building a kernel for a single machine) and
 	  you need to shrink the kernel to the minimal size.
 
+config NEED_MACH_GPIO_H
+	bool
+	help
+	  Select this when mach/gpio.h is required to provide special
+	  definitions for this platform. The need for mach/gpio.h should
+	  be avoided when possible.
+
 config NEED_MACH_IO_H
 	bool
 	help
@@ -247,39 +254,29 @@ config MMU
 #
 choice
 	prompt "ARM system type"
-	default ARCH_VERSATILE
+	default ARCH_MULTIPLATFORM
 
-config ARCH_SOCFPGA
-	bool "Altera SOCFPGA family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_GIC
-	select CACHE_L2X0
-	select CLKDEV_LOOKUP
+config ARCH_MULTIPLATFORM
+	bool "Allow multiple platforms to be selected"
+	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR
 	select COMMON_CLK
-	select CPU_V7
-	select DW_APB_TIMER
-	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PL061 if GPIOLIB
-	select HAVE_ARM_SCU
+	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
-	help
-	  This enables support for Altera SOCFPGA Cyclone V platform
+	depends on MMU
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
 	select COMMON_CLK
-	select CLK_VERSATILE
+	select COMMON_CLK_VERSATILE
 	select HAVE_TCM
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_FPGA_IRQ
-	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
@@ -289,13 +286,12 @@ config ARCH_INTEGRATOR
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
+	select COMMON_CLK
+	select COMMON_CLK_VERSATILE
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
 	select ARM_TIMER_SP804
 	select GPIO_PL061 if GPIOLIB
@@ -312,7 +308,6 @@ config ARCH_VERSATILE
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select NEED_MACH_IO_H if PCI
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
@@ -321,64 +316,46 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
-config ARCH_VEXPRESS
-	bool "ARM Ltd. Versatile Express family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	select HAVE_PATA_PLATFORM
-	select ICST
-	select NO_IOPORT
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLCD
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	help
-	  This enables support for the ARM Ltd Versatile Express boards.
-
 config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_DOMAIN
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
 	help
 	  This enables support for systems based on Atmel
 	  AT91RM9200 and AT91SAM9* processors.
 
-config ARCH_BCMRING
-	bool "Broadcom BCMRING"
-	depends on MMU
-	select CPU_V6
+config ARCH_BCM2835
+	bool "Broadcom BCM2835 family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_ERRATA_411920
 	select ARM_TIMER_SP804
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_V6
 	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+	select USE_OF
 	help
-	  Support for Broadcom's BCMRing platform.
+	  This enables support for the Broadcom BCM2835 SoC. This SoC is
+	  use in the Raspberry Pi, and Roku 2 devices.
 
-config ARCH_HIGHBANK
-	bool "Calxeda Highbank-based"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
+config ARCH_BCMRING
+	bool "Broadcom BCMRING"
+	depends on MMU
+	select CPU_V6
 	select ARM_AMBA
-	select ARM_GIC
 	select ARM_TIMER_SP804
-	select CACHE_L2X0
 	select CLKDEV_LOOKUP
-	select COMMON_CLK
-	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU
-	select HAVE_SMP
-	select SPARSE_IRQ
-	select USE_OF
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
-	  Support for the Calxeda Highbank SoC based boards.
+	  Support for Broadcom's BCMRing platform.
 
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
@@ -407,21 +384,19 @@ config ARCH_GEMINI
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
-config ARCH_PRIMA2
-	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
-	select CPU_V7
+config ARCH_SIRF
+	bool "CSR SiRF"
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_SIRF
 	select USE_OF
-	select ZONE_DMA
 	help
-          Support for CSR SiRFSoC ARM Cortex A9 Platform
+	  Support for CSR SiRFprimaII/Marco/Polo platforms
 
 config ARCH_EBSA110
 	bool "EBSA-110"
@@ -456,7 +431,7 @@ config ARCH_FOOTBRIDGE
 	select FOOTBRIDGE
 	select GENERIC_CLOCKEVENTS
 	select HAVE_IDE
-	select NEED_MACH_IO_H
+	select NEED_MACH_IO_H if !MMU
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for systems based on the DC21285 companion chip
@@ -513,7 +488,6 @@ config ARCH_IOP13XX
 	select PCI
 	select ARCH_SUPPORTS_MSI
 	select VMSPLIT_1G
-	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NEED_RET_TO_USER
 	help
@@ -523,6 +497,7 @@ config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	select NEED_RET_TO_USER
 	select PLAT_IOP
@@ -536,6 +511,7 @@ config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	select NEED_RET_TO_USER
 	select PLAT_IOP
@@ -558,26 +534,14 @@ config ARCH_IXP4XX
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
-config ARCH_MVEBU
-	bool "Marvell SOCs with Device Tree support"
-	select GENERIC_CLOCKEVENTS
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select IRQ_DOMAIN
-	select COMMON_CLK
-	help
-	  Support for the Marvell SoC Family with device tree support
-
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select CPU_V7
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select MIGHT_HAVE_PCI
+	select PLAT_ORION_LEGACY
+	select USB_ARCH_HAS_EHCI
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
@@ -587,8 +551,7 @@ config ARCH_KIRKWOOD
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
@@ -614,8 +577,7 @@ config ARCH_MV78XX0
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
@@ -627,8 +589,7 @@ config ARCH_ORION5X
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -645,6 +606,7 @@ config ARCH_MMP
 	select PLAT_PXA
 	select SPARSE_IRQ
 	select GENERIC_ALLOCATOR
+	select NEED_MACH_GPIO_H
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
@@ -652,8 +614,9 @@ config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
 	select CPU_ARM922T
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_MEMORY_H
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
@@ -683,40 +646,13 @@ config ARCH_TEGRA
 	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select NEED_MACH_IO_H if PCI
 	select ARCH_HAS_CPUFREQ
 	select USE_OF
+	select COMMON_CLK
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
 
-config ARCH_PICOXCELL
-	bool "Picochip picoXcell"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select CPU_V6K
-	select DW_APB_TIMER
-	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
-	select HAVE_TCM
-	select NO_IOPORT
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  This enables support for systems based on the Picochip picoXcell
-	  family of Femtocell devices.  The picoxcell support requires device tree
-	  for all boards.
-
-config ARCH_PNX4008
-	bool "Philips Nexperia PNX4008 Mobile"
-	select CPU_ARM926T
-	select CLKDEV_LOOKUP
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  This enables support for Philips PNX4008 mobile platform.
-
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
@@ -733,6 +669,7 @@ config ARCH_PXA
 	select MULTI_IRQ_HANDLER
 	select ARM_CPU_SUSPEND if PM
 	select HAVE_IDE
+	select NEED_MACH_GPIO_H
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -795,6 +732,7 @@ config ARCH_SA1100
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
@@ -810,6 +748,7 @@ config ARCH_S3C24XX
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	help
 	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
@@ -837,6 +776,7 @@ config ARCH_S3C64XX
 	select SAMSUNG_GPIOLIB_4BIT
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	help
 	  Samsung S3C64XX series based systems
 
@@ -851,6 +791,7 @@ config ARCH_S5P64X0
 	select GENERIC_CLOCKEVENTS
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
+	select NEED_MACH_GPIO_H
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -865,6 +806,7 @@ config ARCH_S5PC100
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	help
 	  Samsung S5PC100 series based systems
 
@@ -882,6 +824,7 @@ config ARCH_S5PV210
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
 	  Samsung S5PV210/S5PC110 series based systems
@@ -899,6 +842,7 @@ config ARCH_EXYNOS
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
@@ -912,7 +856,6 @@ config ARCH_SHARK
 	select PCI
 	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_MEMORY_H
-	select NEED_MACH_IO_H
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -931,6 +874,7 @@ config ARCH_U300
 	select COMMON_CLK
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select SPARSE_IRQ
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
@@ -971,6 +915,7 @@ config ARCH_DAVINCI
 	select GENERIC_ALLOCATOR
 	select GENERIC_IRQ_CHIP
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's DaVinci platform.
 
@@ -983,6 +928,7 @@ config ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
@@ -1022,6 +968,50 @@ config ARCH_ZYNQ
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
 endchoice
 
+menu "Multiple platform selection"
+	depends on ARCH_MULTIPLATFORM
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	select ARCH_MULTI_V4_V5
+	depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	select ARCH_MULTI_V4_V5
+	depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	select ARCH_MULTI_V4_V5
+	depends on !ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+	select CPU_V6
+	select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+	select CPU_V7
+	select ARCH_VEXPRESS
+	default y
+	select ARCH_MULTI_V6_V7
+
+config ARCH_MULTI_V6_V7
+	bool
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
@@ -1049,6 +1039,8 @@ source "arch/arm/mach-gemini/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
 
+source "arch/arm/mach-highbank/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -1084,6 +1076,8 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-picoxcell/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 source "arch/arm/plat-pxa/Kconfig"
 
@@ -1096,6 +1090,8 @@ source "arch/arm/mach-sa1100/Kconfig"
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 
+source "arch/arm/mach-socfpga/Kconfig"
+
 source "arch/arm/plat-spear/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
@@ -1118,6 +1114,8 @@ source "arch/arm/mach-exynos/Kconfig"
 
 source "arch/arm/mach-shmobile/Kconfig"
 
+source "arch/arm/mach-prima2/Kconfig"
+
 source "arch/arm/mach-tegra/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
@@ -1148,6 +1146,10 @@ config PLAT_ORION
 	select IRQ_DOMAIN
 	select COMMON_CLK
 
+config PLAT_ORION_LEGACY
+	bool
+	select PLAT_ORION
+
 config PLAT_PXA
 	bool
 
@@ -1179,12 +1181,6 @@ config XSCALE_PMU
 	depends on CPU_XSCALE
 	default y
 
-config CPU_HAS_PMU
-	depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
-		   (!ARCH_OMAP3 || OMAP3_EMU)
-	default y
-	bool
-
 config MULTI_IRQ_HANDLER
 	bool
 	help
@@ -1757,7 +1753,7 @@ config HIGHPTE
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && CPU_HAS_PMU
+	depends on PERF_EVENTS
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -2060,7 +2056,7 @@ endchoice
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
-	depends on !ZBOOT_ROM && !ARM_LPAE
+	depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM

arch/arm/Kconfig.debug

@@ -261,6 +261,20 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8960 devices.
 
+	config DEBUG_MVEBU_UART
+		bool "Kernel low-level debugging messages via MVEBU UART"
+		depends on ARCH_MVEBU
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on MVEBU based platforms.
+
+	config DEBUG_PICOXCELL_UART
+		depends on ARCH_PICOXCELL
+		bool "Use PicoXcell UART for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on PicoXcell based platforms.
+
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
 		depends on ARCH_REALVIEW
@@ -310,6 +324,13 @@ choice
 		  The uncompressor code port configuration is now handled
 		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
+	config DEBUG_SOCFPGA_UART
+		depends on ARCH_SOCFPGA
+		bool "Use SOCFPGA UART for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA based platforms.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -338,6 +359,7 @@ choice
 
 	config DEBUG_LL_UART_NONE
 		bool "No low-level debugging UART"
+		depends on !ARCH_MULTIPLATFORM
 		help
 		  Say Y here if your platform doesn't provide a UART option
 		  below. This relies on your platform choosing the right UART
@@ -373,6 +395,17 @@ choice
 
 endchoice
 
+config DEBUG_LL_INCLUDE
+	string
+	default "debug/icedcc.S" if DEBUG_ICEDCC
+	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
+	default "debug/mvebu.S" if DEBUG_MVEBU_UART
+	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
+	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
+		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+	default "mach/debug-macro.S"
+
 config EARLY_PRINTK
 	bool "Early printk"
 	depends on DEBUG_LL

arch/arm/Makefile

@@ -135,84 +135,79 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
-machine-$(CONFIG_ARCH_AT91)		:= at91
-machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
-machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		:= cns3xxx
-machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
-machine-$(CONFIG_ARCH_DOVE)		:= dove
-machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
-machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
-machine-$(CONFIG_ARCH_GEMINI)		:= gemini
-machine-$(CONFIG_ARCH_H720X)		:= h720x
-machine-$(CONFIG_ARCH_HIGHBANK)		:= highbank
-machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
-machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
-machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
-machine-$(CONFIG_ARCH_IOP33X)		:= iop33x
-machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
-machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
-machine-$(CONFIG_ARCH_KS8695)		:= ks8695
-machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
-machine-$(CONFIG_ARCH_MMP)		:= mmp
-machine-$(CONFIG_ARCH_MSM)		:= msm
-machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
-machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
-machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
-machine-$(CONFIG_ARCH_MXS)		:= mxs
-machine-$(CONFIG_ARCH_MVEBU)		:= mvebu
-machine-$(CONFIG_ARCH_NETX)		:= netx
-machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
-machine-$(CONFIG_ARCH_OMAP1)		:= omap1
-machine-$(CONFIG_ARCH_OMAP2PLUS)	:= omap2
-machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
-machine-$(CONFIG_ARCH_PICOXCELL)	:= picoxcell
-machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
-machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
-machine-$(CONFIG_ARCH_PXA)		:= pxa
-machine-$(CONFIG_ARCH_REALVIEW)		:= realview
-machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		:= s3c24xx s3c2412 s3c2440
-machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
-machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
-machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
-machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos
-machine-$(CONFIG_ARCH_EXYNOS5)		:= exynos
-machine-$(CONFIG_ARCH_SA1100)		:= sa1100
-machine-$(CONFIG_ARCH_SHARK)		:= shark
-machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
-machine-$(CONFIG_ARCH_TEGRA)		:= tegra
-machine-$(CONFIG_ARCH_U300)		:= u300
-machine-$(CONFIG_ARCH_U8500)		:= ux500
-machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
-machine-$(CONFIG_ARCH_VT8500)		:= vt8500
-machine-$(CONFIG_ARCH_W90X900)		:= w90x900
-machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
-machine-$(CONFIG_ARCH_SOCFPGA)		:= socfpga
-machine-$(CONFIG_MACH_SPEAR1310)	:= spear13xx
-machine-$(CONFIG_MACH_SPEAR1340)	:= spear13xx
-machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
-machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
-machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
-machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
-machine-$(CONFIG_ARCH_ZYNQ)		:= zynq
+machine-$(CONFIG_ARCH_AT91)		+= at91
+machine-$(CONFIG_ARCH_BCM2835)		+= bcm2835
+machine-$(CONFIG_ARCH_BCMRING)		+= bcmring
+machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
+machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
+machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
+machine-$(CONFIG_ARCH_DOVE)		+= dove
+machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
+machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
+machine-$(CONFIG_ARCH_GEMINI)		+= gemini
+machine-$(CONFIG_ARCH_H720X)		+= h720x
+machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
+machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
+machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
+machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
+machine-$(CONFIG_ARCH_IOP33X)		+= iop33x
+machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD)		+= kirkwood
+machine-$(CONFIG_ARCH_KS8695)		+= ks8695
+machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
+machine-$(CONFIG_ARCH_MMP)		+= mmp
+machine-$(CONFIG_ARCH_MSM)		+= msm
+machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
+machine-$(CONFIG_ARCH_MXC)		+= imx
+machine-$(CONFIG_ARCH_MXS)		+= mxs
+machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
+machine-$(CONFIG_ARCH_NETX)		+= netx
+machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
+machine-$(CONFIG_ARCH_OMAP1)		+= omap1
+machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
+machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
+machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
+machine-$(CONFIG_ARCH_PRIMA2)		+= prima2
+machine-$(CONFIG_ARCH_PXA)		+= pxa
+machine-$(CONFIG_ARCH_REALVIEW)		+= realview
+machine-$(CONFIG_ARCH_RPC)		+= rpc
+machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
+machine-$(CONFIG_ARCH_S5P64X0)		+= s5p64x0
+machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
+machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
+machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
+machine-$(CONFIG_ARCH_SA1100)		+= sa1100
+machine-$(CONFIG_ARCH_SHARK)		+= shark
+machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
+machine-$(CONFIG_ARCH_TEGRA)		+= tegra
+machine-$(CONFIG_ARCH_U300)		+= u300
+machine-$(CONFIG_ARCH_U8500)		+= ux500
+machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
+machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
+machine-$(CONFIG_ARCH_VT8500)		+= vt8500
+machine-$(CONFIG_ARCH_W90X900)		+= w90x900
+machine-$(CONFIG_FOOTBRIDGE)		+= footbridge
+machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx
+machine-$(CONFIG_ARCH_SPEAR3XX)		+= spear3xx
+machine-$(CONFIG_MACH_SPEAR600)		+= spear6xx
+machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC)		:= mxc
-plat-$(CONFIG_ARCH_OMAP)	:= omap
-plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
-plat-$(CONFIG_ARCH_ZYNQ)	:= versatile
-plat-$(CONFIG_PLAT_IOP)		:= iop
-plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
-plat-$(CONFIG_PLAT_ORION)	:= orion
-plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P)		:= samsung
-plat-$(CONFIG_PLAT_SPEAR)	:= spear
-plat-$(CONFIG_PLAT_VERSATILE)	:= versatile
+plat-$(CONFIG_ARCH_MXC)		+= mxc
+plat-$(CONFIG_ARCH_OMAP)	+= omap
+plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
+plat-$(CONFIG_ARCH_ZYNQ)	+= versatile
+plat-$(CONFIG_PLAT_IOP)		+= iop
+plat-$(CONFIG_PLAT_NOMADIK)	+= nomadik
+plat-$(CONFIG_PLAT_ORION)	+= orion
+plat-$(CONFIG_PLAT_PXA)		+= pxa
+plat-$(CONFIG_PLAT_S3C24XX)	+= s3c24xx samsung
+plat-$(CONFIG_PLAT_S5P)		+= samsung
+plat-$(CONFIG_PLAT_SPEAR)	+= spear
+plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -230,15 +225,20 @@ MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
 else
 MACHINE  :=
 endif
+ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+MACHINE  :=
+endif
 
 machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
 platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
 
+ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
 ifeq ($(KBUILD_SRC),)
 KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
 else
 KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
 endif
+endif
 
 export	TEXT_OFFSET GZFLAGS MMUEXT
 

arch/arm/boot/Makefile

@@ -15,6 +15,8 @@ ifneq ($(MACHINE),)
 include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
+include $(srctree)/arch/arm/boot/dts/Makefile
+
 # Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR

arch/arm/boot/compressed/misc.c

@@ -25,7 +25,13 @@ unsigned int __machine_arch_type;
 static void putstr(const char *ptr);
 extern void error(char *x);
 
+#ifdef CONFIG_ARCH_MULTIPLATFORM
+static inline void putc(int c) {}
+static inline void flush(void) {}
+static inline void arch_decomp_setup(void) {}
+#else
 #include <mach/uncompress.h>
+#endif
 
 #ifdef CONFIG_DEBUG_ICEDCC
 

arch/arm/boot/dts/Makefile

@@ -0,0 +1,106 @@
+ifeq ($(CONFIG_OF),y)
+
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
+	at91sam9263ek.dtb \
+	at91sam9g20ek_2mmc.dtb \
+	at91sam9g20ek.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9m10g45ek.dtb \
+	at91sam9n12ek.dtb \
+	ethernut5.dtb \
+	evk-pro3.dtb \
+	kizbox.dtb \
+	tny_a9260.dtb \
+	tny_a9263.dtb \
+	tny_a9g20.dtb \
+	usb_a9260.dtb \
+	usb_a9263.dtb \
+	usb_a9g20.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
+	dove-cubox.dtb \
+	dove-dove-db.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
+	exynos4210-smdkv310.dtb \
+	exynos5250-smdk5250.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
+dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \
+	imx53-ard.dtb \
+	imx53-evk.dtb \
+	imx53-qsb.dtb \
+	imx53-smd.dtb
+dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
+	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
+	kirkwood-dreamplug.dtb \
+	kirkwood-goflexnet.dtb \
+	kirkwood-ib62x0.dtb \
+	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-km_kirkwood.dtb \
+	kirkwood-lschlv2.dtb \
+	kirkwood-lsxhl.dtb \
+	kirkwood-ts219-6281.dtb \
+	kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
+	msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
+	armada-xp-db.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+	imx53-ard.dtb \
+	imx53-evk.dtb \
+	imx53-qsb.dtb \
+	imx53-smd.dtb \
+	imx6q-arm2.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb
+dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+	imx23-olinuxino.dtb \
+	imx23-stmp378x_devb.dtb \
+	imx28-apx4devkit.dtb \
+	imx28-cfa10036.dtb \
+	imx28-cfa10049.dtb \
+	imx28-evk.dtb \
+	imx28-m28evk.dtb \
+	imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle-xm.dtb \
+	omap3-evm.dtb \
+	omap3-tobi.dtb \
+	omap4-panda.dtb \
+	omap4-pandaES.dtb \
+	omap4-var_som.dtb \
+	omap4-sdp.dtb \
+	omap5-evm.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	r8a7740-armadillo800eva.dtb \
+	sh73a0-kzm9g.dtb
+dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
+	spear1340-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
+	spear310-evb.dtb \
+	spear320-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+	tegra20-medcom-wide.dtb \
+	tegra20-paz00.dtb \
+	tegra20-plutux.dtb \
+	tegra20-seaboard.dtb \
+	tegra20-tec.dtb \
+	tegra20-trimslice.dtb \
+	tegra20-ventana.dtb \
+	tegra20-whistler.dtb \
+	tegra30-cardhu-a02.dtb \
+	tegra30-cardhu-a04.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb
+
+endif

arch/arm/boot/dts/am335x-bone.dts

@@ -17,4 +17,64 @@
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@24 {
+				reg = <0x24>;
+			};
+
+		};
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-always-on;
+		};
+	};
 };

arch/arm/boot/dts/am335x-evm.dts

@@ -17,4 +17,104 @@
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@2d {
+				reg = <0x2d>;
+			};
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
 };

arch/arm/boot/dts/am33xx.dtsi

@@ -69,95 +69,146 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x44e07000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <96>;
 		};
 
-		gpio2: gpio@4804C000 {
+		gpio2: gpio@4804c000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x4804c000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <98>;
 		};
 
-		gpio3: gpio@481AC000 {
+		gpio3: gpio@481ac000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x481ac000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <32>;
 		};
 
-		gpio4: gpio@481AE000 {
+		gpio4: gpio@481ae000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x481ae000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <62>;
 		};
 
-		uart1: serial@44E09000 {
+		uart1: serial@44e09000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
+			reg = <0x44e09000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <72>;
+			status = "disabled";
 		};
 
 		uart2: serial@48022000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
+			reg = <0x48022000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <73>;
+			status = "disabled";
 		};
 
 		uart3: serial@48024000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
+			reg = <0x48024000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <74>;
+			status = "disabled";
 		};
 
-		uart4: serial@481A6000 {
+		uart4: serial@481a6000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
+			reg = <0x481a6000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <44>;
+			status = "disabled";
 		};
 
-		uart5: serial@481A8000 {
+		uart5: serial@481a8000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
+			reg = <0x481a8000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <45>;
+			status = "disabled";
 		};
 
-		uart6: serial@481AA000 {
+		uart6: serial@481aa000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
+			reg = <0x481aa000 0x2000>;
+			interrupt-parent = <&intc>;
+			interrupts = <46>;
+			status = "disabled";
 		};
 
-		i2c1: i2c@44E0B000 {
+		i2c1: i2c@44e0b000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
+			reg = <0x44e0b000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <70>;
+			status = "disabled";
 		};
 
-		i2c2: i2c@4802A000 {
+		i2c2: i2c@4802a000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <71>;
+			status = "disabled";
 		};
 
-		i2c3: i2c@4819C000 {
+		i2c3: i2c@4819c000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
+			reg = <0x4819c000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <30>;
+			status = "disabled";
 		};
 
 		wdt2: wdt@44e35000 {
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
+			reg = <0x44e35000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <91>;
 		};
 	};
 };

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -63,6 +63,11 @@
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
 		};
+
+		addr-decoding@d0020000 {
+			compatible = "marvell,armada-addr-decoding-controller";
+			reg = <0xd0020000 0x258>;
+		};
 	};
 };
 

arch/arm/boot/dts/armada-370.dtsi

@@ -21,6 +21,12 @@
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
 	mpic: interrupt-controller@d0020000 {
 	      reg = <0xd0020a00 0x1d0>,
 		    <0xd0021870 0x58>;
@@ -31,5 +37,43 @@
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x100>;
 		};
+
+		pinctrl {
+			compatible = "marvell,mv88f6710-pinctrl";
+			reg = <0xd0018000 0x38>;
+	        };
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <82>, <83>, <84>, <85>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <87>, <88>, <89>, <90>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
+			ngpios = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <91>;
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-db.dts

@@ -14,11 +14,11 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp.dtsi"
+/include/ "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -0,0 +1,57 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78230-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <17>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>;
+		};
+	};
+};

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78260-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+};

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+/include/ "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "marvell,mv78460-pinctrl";
+			reg = <0xd0018000 0x38>;
+		};
+
+		gpio0: gpio@d0018100 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <16>, <17>, <18>, <19>;
+		};
+
+		gpio1: gpio@d0018140 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
+			ngpios = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <20>, <21>, <22>, <23>;
+		};
+
+		gpio2: gpio@d0018180 {
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
+			ngpios = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupts-cells = <2>;
+			interrupts = <24>;
+		};
+	};
+ };

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -0,0 +1,12 @@
+/dts-v1/;
+/memreserve/ 0x0c000000 0x04000000;
+/include/ "bcm2835.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	memory {
+		reg = <0 0x10000000>;
+	};
+};

arch/arm/boot/dts/bcm2835.dtsi

@@ -0,0 +1,39 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	interrupt-parent = <&intc>;
+
+	chosen {
+		bootargs = "earlyprintk console=ttyAMA0";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+
+		timer {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			clock-frequency = <1000000>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart@20201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clock-frequency = <3000000>;
+		};
+	};
+};

arch/arm/boot/dts/dove-cm-a510.dts

@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};

arch/arm/boot/dts/dove-cubox.dts

@@ -0,0 +1,42 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};

arch/arm/boot/dts/dove-dove-db.dts

@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	spi-flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};

arch/arm/boot/dts/dove.dtsi

@@ -0,0 +1,143 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf1020204 0x04>,
+		      <0xf1020214 0x04>;
+	};
+
+	mbus@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0 0xf1000000 0x4000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <7>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <8>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart2: serial@12200 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <9>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		uart3: serial@12300 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <10>;
+			clock-frequency = <166666667>;
+			status = "disabled";
+		};
+
+		wdt: wdt@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>;
+		};
+
+		gpio0: gpio@d0400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0400 0x20>;
+			ngpio = <32>;
+			interrupts = <12>, <13>, <14>, <60>;
+		};
+
+		gpio1: gpio@d0420 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xd0420 0x20>;
+			ngpio = <32>;
+			interrupts = <61>;
+		};
+
+		gpio2: gpio@e8400 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xe8400 0x0c>;
+			ngpio = <8>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <6>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		spi1: spi@14600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <5>;
+			reg = <0x14600 0x28>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <11>;
+			clock-frequency = <400000>;
+			timeout-ms = <1000>;
+			status = "disabled";
+		};
+
+		sdio0: sdio@92000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x92000 0x100>;
+			interrupts = <35>, <37>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@90000 {
+			compatible = "marvell,dove-sdhci";
+			reg = <0x90000 0x100>;
+			interrupts = <36>, <38>;
+			status = "disabled";
+		};
+
+		sata0: sata@a0000 {
+			compatible = "marvell,orion-sata";
+			reg = <0xa0000 0x2400>;
+			interrupts = <62>;
+			nr-ports = <1>;
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/ea3250.dts

@@ -166,9 +166,116 @@
 		#size-cells = <0>;
 		autorepeat;
 		button@21 {
-			label = "GPIO Key UP";
+			label = "Interrupt Key";
 			linux,code = <103>;
 			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
 		};
+		key1 {
+			label = "KEY1";
+			linux,code = <1>;
+			gpios = <&pca9532 0 0>;
+		};
+		key2 {
+			label = "KEY2";
+			linux,code = <2>;
+			gpios = <&pca9532 1 0>;
+		};
+		key3 {
+			label = "KEY3";
+			linux,code = <3>;
+			gpios = <&pca9532 2 0>;
+		};
+		key4 {
+			label = "KEY4";
+			linux,code = <4>;
+			gpios = <&pca9532 3 0>;
+		};
+		joy0 {
+			label = "Joystick Key 0";
+			linux,code = <10>;
+			gpios = <&gpio 2 0 0>; /* P2.0 */
+		};
+		joy1 {
+			label = "Joystick Key 1";
+			linux,code = <11>;
+			gpios = <&gpio 2 1 0>; /* P2.1 */
+		};
+		joy2 {
+			label = "Joystick Key 2";
+			linux,code = <12>;
+			gpios = <&gpio 2 2 0>; /* P2.2 */
+		};
+		joy3 {
+			label = "Joystick Key 3";
+			linux,code = <13>;
+			gpios = <&gpio 2 3 0>; /* P2.3 */
+		};
+		joy4 {
+			label = "Joystick Key 4";
+			linux,code = <14>;
+			gpios = <&gpio 2 4 0>; /* P2.4 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* LEDs on OEM Board */
+
+		led1 {
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+
+		led2 {
+			gpios = <&gpio 2 10 1>; /* P2.10, active low */
+			default-state = "off";
+		};
+
+		led3 {
+			gpios = <&gpio 2 11 1>; /* P2.11, active low */
+			default-state = "off";
+		};
+
+		led4 {
+			gpios = <&gpio 2 12 1>; /* P2.12, active low */
+			default-state = "off";
+		};
+
+		/* LEDs on Base Board */
+
+		lede1 {
+			gpios = <&pca9532 8 0>;
+			default-state = "off";
+		};
+		lede2 {
+			gpios = <&pca9532 9 0>;
+			default-state = "off";
+		};
+		lede3 {
+			gpios = <&pca9532 10 0>;
+			default-state = "off";
+		};
+		lede4 {
+			gpios = <&pca9532 11 0>;
+			default-state = "off";
+		};
+		lede5 {
+			gpios = <&pca9532 12 0>;
+			default-state = "off";
+		};
+		lede6 {
+			gpios = <&pca9532 13 0>;
+			default-state = "off";
+		};
+		lede7 {
+			gpios = <&pca9532 14 0>;
+			default-state = "off";
+		};
+		lede8 {
+			gpios = <&pca9532 15 0>;
+			default-state = "off";
+		};
 	};
 };

arch/arm/boot/dts/elpida_ecb240abacn.dtsi

@@ -0,0 +1,67 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+	elpida_ECB240ABACN: lpddr2 {
+		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+		density		= <2048>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <400000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <200000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <10000>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};

arch/arm/boot/dts/imx23-evk.dts

@@ -42,12 +42,13 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
 						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
 						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -31,6 +31,22 @@
 				bus-width = <4>;
 				status = "okay";
 			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
 		};
 
 		apbx@80040000 {
@@ -39,6 +55,47 @@
 				pinctrl-0 = <&duart_pins_a>;
 				status = "okay";
 			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+			gpio = <&gpio0 17 0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "green";
+			gpios = <&gpio2 1 0>;
+			linux,default-trigger = "default-on";
 		};
 	};
 };

arch/arm/boot/dts/imx23-stmp378x_devb.dts

@@ -36,7 +36,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */

arch/arm/boot/dts/imx23.dtsi

@@ -52,6 +52,7 @@
 			dma-apbh@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
+				clocks = <&clks 15>;
 			};
 
 			ecc@80008000 {
@@ -67,6 +68,7 @@
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <13>, <56>;
 				interrupt-names = "gpmi-dma", "bch";
+				clocks = <&clks 34>;
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
@@ -74,6 +76,7 @@
 			ssp0: ssp@80010000 {
 				reg = <0x80010000 0x2000>;
 				interrupts = <15 14>;
+				clocks = <&clks 33>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
@@ -140,6 +143,17 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
+						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -183,7 +197,6 @@
 						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
 						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
 						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
 						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
 					>;
 					fsl,drive-strength = <1>;
@@ -280,6 +293,7 @@
 			dma-apbx@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
+				clocks = <&clks 16>;
 			};
 
 			dcp@80028000 {
@@ -306,12 +320,14 @@
 				compatible = "fsl,imx23-lcdif";
 				reg = <0x80030000 2000>;
 				interrupts = <46 45>;
+				clocks = <&clks 38>;
 				status = "disabled";
 			};
 
 			ssp1: ssp@80034000 {
 				reg = <0x80034000 0x2000>;
 				interrupts = <2 20>;
+				clocks = <&clks 33>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
@@ -329,9 +345,10 @@
 			reg = <0x80040000 0x40000>;
 			ranges;
 
-			clkctl@80040000 {
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx23-clkctrl";
 				reg = <0x80040000 0x2000>;
-				status = "disabled";
+				#clock-cells = <1>;
 			};
 
 			saif0: saif@80042000 {
@@ -383,6 +400,7 @@
 			pwm: pwm@80064000 {
 				compatible = "fsl,imx23-pwm";
 				reg = <0x80064000 0x2000>;
+				clocks = <&clks 30>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <5>;
 				status = "disabled";
@@ -397,6 +415,7 @@
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
 				interrupts = <24 25 23>;
+				clocks = <&clks 32>;
 				status = "disabled";
 			};
 
@@ -404,6 +423,7 @@
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
 				interrupts = <59 60 58>;
+				clocks = <&clks 32>;
 				status = "disabled";
 			};
 
@@ -411,11 +431,15 @@
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x80070000 0x2000>;
 				interrupts = <0>;
+				clocks = <&clks 32>, <&clks 16>;
+				clock-names = "uart", "apb_pclk";
 				status = "disabled";
 			};
 
-			usbphy@8007c000 {
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx23-usbphy";
 				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 41>;
 				status = "disabled";
 			};
 		};
@@ -428,8 +452,12 @@
 		reg = <0x80080000 0x80000>;
 		ranges;
 
-		usbctrl@80080000 {
+		usb0: usb@80080000 {
+			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
 			reg = <0x80080000 0x40000>;
+			interrupts = <11>;
+			fsl,usbphy = <&usbphy0>;
+			clocks = <&clks 40>;
 			status = "disabled";
 		};
 	};

arch/arm/boot/dts/imx27-phytec-phycore.dts

@@ -23,10 +23,6 @@
 	soc {
 		aipi@10000000 { /* aipi */
 
-			wdog@10002000 {
-				status = "okay";
-			};
-
 			serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
@@ -49,7 +45,7 @@
 			i2c@1001d000 {
 				clock-frequency = <400000>;
 				status = "okay";
-				at24@4c {
+				at24@52 {
 					compatible = "at,24c32";
 					pagesize = <32>;
 					reg = <0x52>;

arch/arm/boot/dts/imx27.dtsi

@@ -62,7 +62,6 @@
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x4000>;
 				interrupts = <27>;
-				status = "disabled";
 			};
 
 			uart1: serial@1000a000 {

arch/arm/boot/dts/imx28-apx4devkit.dts

@@ -37,7 +37,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */

arch/arm/boot/dts/imx28-cfa10049.dts

@@ -0,0 +1,99 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10049 Board";
+	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				spi3_pins_cfa10049: spi3-cfa10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
+						0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
+						0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
+						0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+
+			ssp3: ssp@80016000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_pins_cfa10049>;
+				status = "okay";
+
+				gpio5: gpio5@0 {
+					compatible = "fairchild,74hc595";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0>;
+					registers-number = <2>;
+					spi-max-frequency = <100000>;
+				};
+
+				gpio6: gpio6@1 {
+					compatible = "fairchild,74hc595";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <1>;
+					registers-number = <4>;
+					spi-max-frequency = <100000>;
+				};
+
+			};
+		};
+
+		apbx@80040000 {
+			i2c1: i2c@8005a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins_a>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+};

arch/arm/boot/dts/imx28-evk.dts

@@ -46,11 +46,28 @@
 				wp-gpios = <&gpio0 28 0>;
 			};
 
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "sst,sst25vf016b";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
 			pinctrl@80018000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
@@ -128,6 +145,10 @@
 				status = "okay";
 			};
 
+			lradc@80050000 {
+				status = "okay";
+			};
+
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
@@ -140,6 +161,12 @@
 					VDDIO-supply = <&reg_3p3v>;
 
 				};
+
+				at24@51 {
+					compatible = "at24,24c32";
+					pagesize = <32>;
+					reg = <0x51>;
+				};
 			};
 
 			pwm: pwm@80064000 {

arch/arm/boot/dts/imx28-m28evk.dts

@@ -23,6 +23,8 @@
 	apb@80000000 {
 		apbh@80000000 {
 			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
 				status = "okay";
@@ -61,19 +63,40 @@
 					     &mmc0_cd_cfg
 					     &mmc0_sck_cfg>;
 				bus-width = <8>;
-				wp-gpios = <&gpio3 10 1>;
+				wp-gpios = <&gpio3 10 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
 				status = "okay";
 			};
 
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "m25p80";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
 			pinctrl@80018000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
+						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
 						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
 						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+						0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
+						0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -129,6 +152,7 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
+				clock-frequency = <400000>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -151,32 +175,51 @@
 				};
 			};
 
+			lradc@80050000 {
+				status = "okay";
+			};
+
 			duart: serial@80074000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_a>;
 				status = "okay";
 			};
 
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
+			usbphy0: usbphy@8007c000 {
 				status = "okay";
 			};
 
-			auart3: serial@80070000 {
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
+				pinctrl-0 = <&auart0_2pins_a>;
 				status = "okay";
 			};
 		};
 	};
 
 	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy0_pins_a>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy1_pins_a>;
+			status = "okay";
+		};
+
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio3 11 0>;
 			status = "okay";
 		};
 
@@ -198,6 +241,30 @@
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 28 0>;
+		};
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 12 0>;
+		};
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 13 0>;
+		};
 	};
 
 	sound {

arch/arm/boot/dts/imx28-tx28.dts

@@ -25,7 +25,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&hog_pins_a>;
 
-				hog_pins_a: hog-gpios@0 {
+				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
@@ -34,6 +34,24 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				mac0_pins_gpio: mac0-gpio-mode@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
+						0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
+						0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
+						0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
+						0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
+						0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
+						0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
+						0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
+						0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
 			};
 		};
 
@@ -72,8 +90,9 @@
 	ahb@80080000 {
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
-			pinctrl-names = "default";
+			pinctrl-names = "default", "gpio_mode";
 			pinctrl-0 = <&mac0_pins_a>;
+			pinctrl-1 = <&mac0_pins_gpio>;
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/imx28.dtsi

@@ -27,6 +27,8 @@
 		serial2 = &auart2;
 		serial3 = &auart3;
 		serial4 = &auart4;
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
 	};
 
 	cpus {
@@ -65,6 +67,7 @@
 			dma-apbh@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
 				reg = <0x80004000 0x2000>;
+				clocks = <&clks 25>;
 			};
 
 			perfmon@80006000 {
@@ -81,34 +84,47 @@
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <88>, <41>;
 				interrupt-names = "gpmi-dma", "bch";
+				clocks = <&clks 50>;
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			ssp0: ssp@80010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x80010000 0x2000>;
 				interrupts = <96 82>;
+				clocks = <&clks 46>;
 				fsl,ssp-dma-channel = <0>;
 				status = "disabled";
 			};
 
 			ssp1: ssp@80012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x80012000 0x2000>;
 				interrupts = <97 83>;
+				clocks = <&clks 47>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
 			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x80014000 0x2000>;
 				interrupts = <98 84>;
+				clocks = <&clks 48>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
 			ssp3: ssp@80016000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0x80016000 0x2000>;
 				interrupts = <99 85>;
+				clocks = <&clks 49>;
 				fsl,ssp-dma-channel = <3>;
 				status = "disabled";
 			};
@@ -410,6 +426,28 @@
 					fsl,pull-up = <1>;
 				};
 
+				i2c0_pins_b: i2c0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
+						0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				i2c1_pins_a: i2c1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
+						0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
 				saif0_pins_a: saif0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -453,6 +491,16 @@
 					fsl,pull-up = <0>;
 				};
 
+				pwm4_pins_a: pwm4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -507,6 +555,49 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
+						0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
+						0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
+						0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				usbphy0_pins_a: usbphy0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				usbphy0_pins_b: usbphy0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				usbphy1_pins_a: usbphy1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
 			};
 
 			digctl@8001c000 {
@@ -523,6 +614,7 @@
 			dma-apbx@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
+				clocks = <&clks 26>;
 			};
 
 			dcp@80028000 {
@@ -551,6 +643,7 @@
 				compatible = "fsl,imx28-lcdif";
 				reg = <0x80030000 0x2000>;
 				interrupts = <38 86>;
+				clocks = <&clks 55>;
 				status = "disabled";
 			};
 
@@ -558,6 +651,8 @@
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 				reg = <0x80032000 0x2000>;
 				interrupts = <8>;
+				clocks = <&clks 58>, <&clks 58>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -565,6 +660,8 @@
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 				reg = <0x80034000 0x2000>;
 				interrupts = <9>;
+				clocks = <&clks 59>, <&clks 59>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -611,15 +708,17 @@
 			reg = <0x80040000 0x40000>;
 			ranges;
 
-			clkctl@80040000 {
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx28-clkctrl";
 				reg = <0x80040000 0x2000>;
-				status = "disabled";
+				#clock-cells = <1>;
 			};
 
 			saif0: saif@80042000 {
 				compatible = "fsl,imx28-saif";
 				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
+				clocks = <&clks 53>;
 				fsl,saif-dma-channel = <4>;
 				status = "disabled";
 			};
@@ -633,12 +732,16 @@
 				compatible = "fsl,imx28-saif";
 				reg = <0x80046000 0x2000>;
 				interrupts = <58 81>;
+				clocks = <&clks 54>;
 				fsl,saif-dma-channel = <5>;
 				status = "disabled";
 			};
 
 			lradc@80050000 {
+				compatible = "fsl,imx28-lradc";
 				reg = <0x80050000 0x2000>;
+				interrupts = <10 14 15 16 17 18 19
+						20 21 22 23 24 25>;
 				status = "disabled";
 			};
 
@@ -677,6 +780,7 @@
 			pwm: pwm@80064000 {
 				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 				reg = <0x80064000 0x2000>;
+				clocks = <&clks 44>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <8>;
 				status = "disabled";
@@ -691,6 +795,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006a000 0x2000>;
 				interrupts = <112 70 71>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -698,6 +803,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
 				interrupts = <113 72 73>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -705,6 +811,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
 				interrupts = <114 74 75>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -712,6 +819,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80070000 0x2000>;
 				interrupts = <115 76 77>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -719,6 +827,7 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80072000 0x2000>;
 				interrupts = <116 78 79>;
+				clocks = <&clks 45>;
 				status = "disabled";
 			};
 
@@ -726,18 +835,22 @@
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x80074000 0x1000>;
 				interrupts = <47>;
+				clocks = <&clks 45>, <&clks 26>;
+				clock-names = "uart", "apb_pclk";
 				status = "disabled";
 			};
 
 			usbphy0: usbphy@8007c000 {
 				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 62>;
 				status = "disabled";
 			};
 
 			usbphy1: usbphy@8007e000 {
 				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 				reg = <0x8007e000 0x2000>;
+				clocks = <&clks 63>;
 				status = "disabled";
 			};
 		};
@@ -754,6 +867,7 @@
 			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 			reg = <0x80080000 0x10000>;
 			interrupts = <93>;
+			clocks = <&clks 60>;
 			fsl,usbphy = <&usbphy0>;
 			status = "disabled";
 		};
@@ -762,6 +876,7 @@
 			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 			reg = <0x80090000 0x10000>;
 			interrupts = <92>;
+			clocks = <&clks 61>;
 			fsl,usbphy = <&usbphy1>;
 			status = "disabled";
 		};
@@ -775,6 +890,8 @@
 			compatible = "fsl,imx28-fec";
 			reg = <0x800f0000 0x4000>;
 			interrupts = <101>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
 			status = "disabled";
 		};
 
@@ -782,6 +899,8 @@
 			compatible = "fsl,imx28-fec";
 			reg = <0x800f4000 0x4000>;
 			interrupts = <102>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/imx51-babbage.dts

@@ -25,23 +25,31 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					fsl,cd-controller;
 					fsl,wp-controller;
 					status = "okay";
 				};
 
 				esdhc@70008000 { /* ESDHC2 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc2_1>;
 					cd-gpios = <&gpio1 6 0>;
 					wp-gpios = <&gpio1 5 0>;
 					status = "okay";
 				};
 
 				uart3: serial@7000c000 {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_uart3_1>;
 					fsl,uart-has-rtscts;
 					status = "okay";
 				};
 
 				ecspi@70010000 { /* ECSPI1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					fsl,spi-num-chipselects = <2>;
 					cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
 					status = "okay";
@@ -169,31 +177,43 @@
 				};
 			};
 
-			wdog@73f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@73fa8000 {
-				compatible = "fsl,imx51-iomuxc-babbage";
-				reg = <0x73fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							694  0x20d5	/* MX51_PAD_GPIO1_0__SD1_CD */
+							697  0x20d5	/* MX51_PAD_GPIO1_1__SD1_WP */
+							737  0x100	/* MX51_PAD_GPIO1_5__GPIO1_5 */
+							740  0x100	/* MX51_PAD_GPIO1_6__GPIO1_6 */
+							121  0x5	/* MX51_PAD_EIM_A27__GPIO2_21 */
+							402  0x85	/* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+							405  0x85	/* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@73fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
 			uart2: serial@73fc0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_1>;
 				status = "okay";
 			};
 		};
 
 		aips@80000000 {	/* aips-2 */
-			sdma@83fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
-			};
-
 			i2c@83fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -206,10 +226,14 @@
 			};
 
 			audmux@83fd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
 				status = "okay";
 			};
 
 			ethernet@83fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "mii";
 				status = "okay";
 			};

arch/arm/boot/dts/imx51.dtsi

@@ -130,6 +130,34 @@
 				};
 			};
 
+			usb@73f80000 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80000 0x0200>;
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			usb@73f80200 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80200 0x0200>;
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			usb@73f80400 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80400 0x0200>;
+				interrupts = <16>;
+				status = "disabled";
+			};
+
+			usb@73f80600 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80600 0x0200>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
 			gpio1: gpio@73f84000 {
 				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 				reg = <0x73f84000 0x4000>;
@@ -174,7 +202,6 @@
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
-				status = "disabled";
 			};
 
 			wdog@73f9c000 { /* WDOG2 */
@@ -184,6 +211,122 @@
 				status = "disabled";
 			};
 
+			iomuxc@73fa8000 {
+				compatible = "fsl,imx51-iomuxc";
+				reg = <0x73fa8000 0x4000>;
+
+				audmux {
+					pinctrl_audmux_1: audmuxgrp-1 {
+						fsl,pins = <
+							384 0x80000000	/* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
+							386 0x80000000	/* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
+							389 0x80000000	/* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
+							391 0x80000000	/* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
+						>;
+					};
+				};
+
+				fec {
+					pinctrl_fec_1: fecgrp-1 {
+						fsl,pins = <
+							128 0x80000000	/* MX51_PAD_EIM_EB2__FEC_MDIO */
+							134 0x80000000	/* MX51_PAD_EIM_EB3__FEC_RDATA1 */
+							146 0x80000000	/* MX51_PAD_EIM_CS2__FEC_RDATA2 */
+							152 0x80000000	/* MX51_PAD_EIM_CS3__FEC_RDATA3 */
+							158 0x80000000	/* MX51_PAD_EIM_CS4__FEC_RX_ER */
+							165 0x80000000	/* MX51_PAD_EIM_CS5__FEC_CRS */
+							206 0x80000000	/* MX51_PAD_NANDF_RB2__FEC_COL */
+							213 0x80000000	/* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
+							293 0x80000000	/* MX51_PAD_NANDF_D9__FEC_RDATA0 */
+							298 0x80000000	/* MX51_PAD_NANDF_D8__FEC_TDATA0 */
+							225 0x80000000	/* MX51_PAD_NANDF_CS2__FEC_TX_ER */
+							231 0x80000000	/* MX51_PAD_NANDF_CS3__FEC_MDC */
+							237 0x80000000	/* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
+							243 0x80000000	/* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
+							250 0x80000000	/* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
+							255 0x80000000	/* MX51_PAD_NANDF_CS7__FEC_TX_EN */
+							260 0x80000000	/* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							398 0x185	/* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
+							394 0x185	/* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
+							409 0x185	/* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
+						>;
+					};
+				};
+
+				esdhc1 {
+					pinctrl_esdhc1_1: esdhc1grp-1 {
+						fsl,pins = <
+							666 0x400020d5	/* MX51_PAD_SD1_CMD__SD1_CMD */
+							669 0x20d5	/* MX51_PAD_SD1_CLK__SD1_CLK */
+							672 0x20d5	/* MX51_PAD_SD1_DATA0__SD1_DATA0 */
+							678 0x20d5	/* MX51_PAD_SD1_DATA1__SD1_DATA1 */
+							684 0x20d5	/* MX51_PAD_SD1_DATA2__SD1_DATA2 */
+							691 0x20d5	/* MX51_PAD_SD1_DATA3__SD1_DATA3 */
+						>;
+					};
+				};
+
+				esdhc2 {
+					pinctrl_esdhc2_1: esdhc2grp-1 {
+						fsl,pins = <
+							704 0x400020d5	/* MX51_PAD_SD2_CMD__SD2_CMD */
+							707 0x20d5	/* MX51_PAD_SD2_CLK__SD2_CLK */
+							710 0x20d5	/* MX51_PAD_SD2_DATA0__SD2_DATA0 */
+							712 0x20d5	/* MX51_PAD_SD2_DATA1__SD2_DATA1 */
+							715 0x20d5	/* MX51_PAD_SD2_DATA2__SD2_DATA2 */
+							719 0x20d5	/* MX51_PAD_SD2_DATA3__SD2_DATA3 */
+						>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2_1: i2c2grp-1 {
+						fsl,pins = <
+							449 0x400001ed	/* MX51_PAD_KEY_COL4__I2C2_SCL */
+							454 0x400001ed	/* MX51_PAD_KEY_COL5__I2C2_SDA */
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							413 0x1c5	/* MX51_PAD_UART1_RXD__UART1_RXD */
+							416 0x1c5	/* MX51_PAD_UART1_TXD__UART1_TXD */
+							418 0x1c5	/* MX51_PAD_UART1_RTS__UART1_RTS */
+							420 0x1c5	/* MX51_PAD_UART1_CTS__UART1_CTS */
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							423 0x1c5	/* MX51_PAD_UART2_RXD__UART2_RXD */
+							426 0x1c5	/* MX51_PAD_UART2_TXD__UART2_TXD */
+						>;
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3_1: uart3grp-1 {
+						fsl,pins = <
+							54 0x1c5	/* MX51_PAD_EIM_D25__UART3_RXD */
+							59 0x1c5	/* MX51_PAD_EIM_D26__UART3_TXD */
+							65 0x1c5	/* MX51_PAD_EIM_D27__UART3_RTS */
+							49 0x1c5	/* MX51_PAD_EIM_D24__UART3_CTS */
+						>;
+					};
+				};
+			};
+
 			uart1: serial@73fbc000 {
 				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 				reg = <0x73fbc000 0x4000>;
@@ -219,6 +362,7 @@
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
 			cspi@83fc0000 {

arch/arm/boot/dts/imx53-ard.dts

@@ -25,31 +25,66 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_2>;
 					cd-gpios = <&gpio1 1 0>;
 					wp-gpios = <&gpio1 9 0>;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-ard";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1077 0x80000000	/* MX53_PAD_GPIO_1__GPIO1_1 */
+							1085 0x80000000	/* MX53_PAD_GPIO_9__GPIO1_9 */
+							486  0x80000000	/* MX53_PAD_EIM_EB3__GPIO2_31 */
+							739  0x80000000	/* MX53_PAD_GPIO_10__GPIO4_0 */
+							218  0x80000000	/* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+							226  0x80000000	/* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+							233  0x80000000	/* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+							241  0x80000000	/* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+							429  0x80000000	/* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+							435  0x80000000	/* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+							441  0x80000000	/* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+							448  0x80000000	/* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+							456  0x80000000	/* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+							464  0x80000000	/* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+							471  0x80000000	/* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+							477  0x80000000	/* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+							492  0x80000000	/* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+							500  0x80000000	/* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+							508  0x80000000	/* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+							516  0x80000000	/* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+							524  0x80000000	/* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+							532  0x80000000	/* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+							540  0x80000000	/* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+							548  0x80000000	/* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+							637  0x80000000	/* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+							642  0x80000000	/* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+							647  0x80000000	/* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+							652  0x80000000	/* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+							657  0x80000000	/* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+							662  0x80000000	/* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+							667  0x80000000	/* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+							611  0x80000000	/* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+							616  0x80000000	/* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+							607  0x80000000	/* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_2>;
 				status = "okay";
 			};
 		};
-
-		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-		};
 	};
 
 	eim-cs1@f4000000 {

arch/arm/boot/dts/imx53-evk.dts

@@ -25,12 +25,16 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					cd-gpios = <&gpio3 13 0>;
 					wp-gpios = <&gpio3 14 0>;
 					status = "okay";
 				};
 
 				ecspi@50010000 { /* ECSPI1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					fsl,spi-num-chipselects = <2>;
 					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
 					status = "okay";
@@ -56,32 +60,45 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc3_1>;
 					cd-gpios = <&gpio3 11 0>;
 					wp-gpios = <&gpio3 12 0>;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-evk";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
+							449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
+							693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
+							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
+							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+							705  0x80000000	/* MX53_PAD_EIM_DA14__GPIO3_14 */
+							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				status = "okay";
 			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
 			i2c@63fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				pmic: mc13892@08 {
@@ -96,6 +113,8 @@
 			};
 
 			ethernet@63fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";

arch/arm/boot/dts/imx53-qsb.dts

@@ -25,6 +25,8 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					cd-gpios = <&gpio3 13 0>;
 					status = "okay";
 				};
@@ -35,32 +37,46 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc3_1>;
 					cd-gpios = <&gpio3 11 0>;
 					wp-gpios = <&gpio3 12 0>;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-qsb";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1071 0x80000000	/* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+							1141 0x80000000	/* MX53_PAD_GPIO_8__GPIO1_8 */
+							982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
+							989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
+							693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
+							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
+							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				status = "okay";
 			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
 			i2c@63fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
@@ -72,6 +88,8 @@
 			};
 
 			i2c@63fc8000 { /* I2C1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 				status = "okay";
 
 				accelerometer: mma8450@1c {
@@ -158,10 +176,14 @@
 			};
 
 			audmux@63fd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_audmux_1>;
 				status = "okay";
 			};
 
 			ethernet@63fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";

arch/arm/boot/dts/imx53-smd.dts

@@ -25,22 +25,30 @@
 		aips@50000000 { /* AIPS1 */
 			spba@50000000 {
 				esdhc@50004000 { /* ESDHC1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc1_1>;
 					cd-gpios = <&gpio3 13 0>;
 					wp-gpios = <&gpio4 11 0>;
 					status = "okay";
 				};
 
 				esdhc@50008000 { /* ESDHC2 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc2_1>;
 					non-removable;
 					status = "okay";
 				};
 
 				uart3: serial@5000c000 {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_uart3_1>;
 					fsl,uart-has-rtscts;
 					status = "okay";
 				};
 
 				ecspi@50010000 { /* ECSPI1 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_ecspi1_1>;
 					fsl,spi-num-chipselects = <2>;
 					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
 					status = "okay";
@@ -72,35 +80,49 @@
 				};
 
 				esdhc@50020000 { /* ESDHC3 */
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_esdhc3_1>;
 					non-removable;
 					status = "okay";
 				};
 			};
 
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
 			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-smd";
-				reg = <0x53fa8000 0x4000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							982  0x80000000	/* MX53_PAD_PATA_DATA14__GPIO2_14 */
+							989  0x80000000	/* MX53_PAD_PATA_DATA15__GPIO2_15 */
+							424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
+							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+							449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
+							43   0x80000000	/* MX53_PAD_KEY_ROW2__GPIO4_11 */
+							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+						>;
+					};
+				};
 			};
 
 			uart1: serial@53fbc000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_1>;
 				status = "okay";
 			};
 
 			uart2: serial@53fc0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_1>;
 				status = "okay";
 			};
 		};
 
 		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
 			i2c@63fc4000 { /* I2C2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_1>;
 				status = "okay";
 
 				codec: sgtl5000@0a {
@@ -120,6 +142,8 @@
 			};
 
 			i2c@63fc8000 { /* I2C1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_1>;
 				status = "okay";
 
 				accelerometer: mma8450@1c {
@@ -139,6 +163,8 @@
 			};
 
 			ethernet@63fec000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fec_1>;
 				phy-mode = "rmii";
 				phy-reset-gpios = <&gpio7 6 0>;
 				status = "okay";

arch/arm/boot/dts/imx53.dtsi

@@ -135,6 +135,34 @@
 				};
 			};
 
+			usb@53f80000 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			usb@53f80200 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			usb@53f80400 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				status = "disabled";
+			};
+
+			usb@53f80600 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
 			gpio1: gpio@53f84000 {
 				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53f84000 0x4000>;
@@ -179,7 +207,6 @@
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
-				status = "disabled";
 			};
 
 			wdog@53f9c000 { /* WDOG2 */
@@ -189,6 +216,161 @@
 				status = "disabled";
 			};
 
+			iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+
+				audmux {
+					pinctrl_audmux_1: audmuxgrp-1 {
+						fsl,pins = <
+							10 0x80000000	/* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
+							17 0x80000000	/* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
+							23 0x80000000	/* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
+							30 0x80000000	/* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
+						>;
+					};
+				};
+
+				fec {
+					pinctrl_fec_1: fecgrp-1 {
+						fsl,pins = <
+							820 0x80000000	/* MX53_PAD_FEC_MDC__FEC_MDC */
+							779 0x80000000	/* MX53_PAD_FEC_MDIO__FEC_MDIO */
+							786 0x80000000	/* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
+							791 0x80000000	/* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
+							796 0x80000000	/* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
+							799 0x80000000	/* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
+							804 0x80000000	/* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
+							808 0x80000000	/* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
+							811 0x80000000	/* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
+							816 0x80000000	/* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							433 0x80000000	/* MX53_PAD_EIM_D16__ECSPI1_SCLK */
+							439 0x80000000	/* MX53_PAD_EIM_D17__ECSPI1_MISO */
+							445 0x80000000	/* MX53_PAD_EIM_D18__ECSPI1_MOSI */
+						>;
+					};
+				};
+
+				esdhc1 {
+					pinctrl_esdhc1_1: esdhc1grp-1 {
+						fsl,pins = <
+							995  0x1d5	/* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+							1000 0x1d5	/* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+							1010 0x1d5	/* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+							1024 0x1d5	/* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+							1005 0x1d5	/* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+							1018 0x1d5	/* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+						>;
+					};
+
+					pinctrl_esdhc1_2: esdhc1grp-2 {
+						fsl,pins = <
+							995  0x1d5	/* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+							1000 0x1d5	/* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+							1010 0x1d5	/* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+							1024 0x1d5	/* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+							941  0x1d5	/* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
+							948  0x1d5	/* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
+							955  0x1d5	/* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
+							962  0x1d5	/* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
+							1005 0x1d5	/* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+							1018 0x1d5	/* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+						>;
+					};
+				};
+
+				esdhc2 {
+					pinctrl_esdhc2_1: esdhc2grp-1 {
+						fsl,pins = <
+							1038 0x1d5	/* MX53_PAD_SD2_CMD__ESDHC2_CMD */
+							1032 0x1d5	/* MX53_PAD_SD2_CLK__ESDHC2_CLK */
+							1062 0x1d5	/* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
+							1056 0x1d5	/* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
+							1050 0x1d5	/* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
+							1044 0x1d5	/* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
+						>;
+					};
+				};
+
+				esdhc3 {
+					pinctrl_esdhc3_1: esdhc3grp-1 {
+						fsl,pins = <
+							943 0x1d5	/* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
+							950 0x1d5	/* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
+							957 0x1d5	/* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
+							964 0x1d5	/* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
+							893 0x1d5	/* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
+							900 0x1d5	/* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
+							906 0x1d5	/* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
+							912 0x1d5	/* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
+							857 0x1d5	/* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
+							863 0x1d5	/* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
+						>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <
+							333 0xc0000000	/* MX53_PAD_CSI0_DAT8__I2C1_SDA */
+							341 0xc0000000	/* MX53_PAD_CSI0_DAT9__I2C1_SCL */
+						>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2_1: i2c2grp-1 {
+						fsl,pins = <
+							61 0xc0000000	/* MX53_PAD_KEY_ROW3__I2C2_SDA */
+							53 0xc0000000	/* MX53_PAD_KEY_COL3__I2C2_SCL */
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							346 0x1c5	/* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
+							354 0x1c5	/* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
+						>;
+					};
+
+					pinctrl_uart1_2: uart1grp-2 {
+						fsl,pins = <
+							828 0x1c5	/* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
+							832 0x1c5	/* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							841 0x1c5	/* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
+							836 0x1c5	/* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
+						>;
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3_1: uart3grp-1 {
+						fsl,pins = <
+							884 0x1c5	/* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+							888 0x1c5	/* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+							875 0x1c5	/* MX53_PAD_PATA_DA_1__UART3_CTS */
+							880 0x1c5	/* MX53_PAD_PATA_DA_2__UART3_RTS */
+						>;
+					};
+				};
+			};
+
 			uart1: serial@53fbc000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x53fbc000 0x4000>;
@@ -203,6 +385,20 @@
 				status = "disabled";
 			};
 
+			can1: can@53fc8000 {
+				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fc8000 0x4000>;
+				interrupts = <82>;
+				status = "disabled";
+			};
+
+			can2: can@53fcc000 {
+				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <83>;
+				status = "disabled";
+			};
+
 			gpio5: gpio@53fdc000 {
 				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53fdc000 0x4000>;
@@ -277,6 +473,7 @@
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
 			cspi@63fc0000 {

arch/arm/boot/dts/imx6q-arm2.dts

@@ -28,8 +28,27 @@
 			status = "disabled"; /* gpmi nand conflicts with SD */
 		};
 
+		aips-bus@02000000 { /* AIPS1 */
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+							1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+							1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+						>;
+					};
+				};
+			};
+		};
+
 		aips-bus@02100000 { /* AIPS2 */
 			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_2>;
 				phy-mode = "rgmii";
 				status = "okay";
 			};
@@ -52,6 +71,8 @@
 			};
 
 			uart4: serial@021f0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart4_1>;
 				status = "okay";
 			};
 		};

arch/arm/boot/dts/imx6q-sabrelite.dts

@@ -46,15 +46,20 @@
 
 			iomuxc@020e0000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_gpio_hog>;
+				pinctrl-0 = <&pinctrl_hog>;
 
-				gpios {
-					pinctrl_gpio_hog: gpiohog {
+				hog {
+					pinctrl_hog: hoggrp {
 						fsl,pins = <
-							   144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
-							   121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
-							   953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
-							   >;
+							1450 0x80000000	/* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
+							1458 0x80000000	/* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
+							121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+							144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+							152  0x80000000	/* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+							1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+							1270 0x1f0b0	/* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+							953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
+						>;
 					};
 				};
 			};
@@ -63,6 +68,9 @@
 		aips-bus@02100000 { /* AIPS2 */
 			usb@02184000 { /* USB OTG */
 				vbus-supply = <&reg_usb_otg_vbus>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usbotg_1>;
+				disable-over-current;
 				status = "okay";
 			};
 
@@ -71,12 +79,16 @@
 			};
 
 			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_1>;
 				phy-mode = "rgmii";
 				phy-reset-gpios = <&gpio3 23 0>;
 				status = "okay";
 			};
 
 			usdhc@02198000 { /* uSDHC3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_2>;
 				cd-gpios = <&gpio7 0 0>;
 				wp-gpios = <&gpio7 1 0>;
 				vmmc-supply = <&reg_3p3v>;
@@ -84,6 +96,8 @@
 			};
 
 			usdhc@0219c000 { /* uSDHC4 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc4_2>;
 				cd-gpios = <&gpio2 6 0>;
 				wp-gpios = <&gpio2 7 0>;
 				vmmc-supply = <&reg_3p3v>;
@@ -99,7 +113,7 @@
 			uart2: serial@021e8000 {
 				status = "okay";
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_serial2_1>;
+				pinctrl-0 = <&pinctrl_uart2_1>;
 			};
 
 			i2c@021a0000 { /* I2C1 */
@@ -111,6 +125,7 @@
 				codec: sgtl5000@0a {
 					compatible = "fsl,sgtl5000";
 					reg = <0x0a>;
+					clocks = <&clks 169>;
 					VDDA-supply = <&reg_2p5v>;
 					VDDIO-supply = <&reg_3p3v>;
 				};

arch/arm/boot/dts/imx6q-sabresd.dts

@@ -22,28 +22,51 @@
 	};
 
 	soc {
-
 		aips-bus@02000000 { /* AIPS1 */
 			spba-bus@02000000 {
 				uart1: serial@02020000 {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_uart1_1>;
 					status = "okay";
 				};
 			};
+
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+							1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+							1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+							1426 0x80000000	/* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+						>;
+					};
+				};
+			};
 		};
 
 		aips-bus@02100000 { /* AIPS2 */
 			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_1>;
 				phy-mode = "rgmii";
 				status = "okay";
 			};
 
 			usdhc@02194000 { /* uSDHC2 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc2_1>;
 				cd-gpios = <&gpio2 2 0>;
 				wp-gpios = <&gpio2 3 0>;
 				status = "okay";
 			};
 
 			usdhc@02198000 { /* uSDHC3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_1>;
 				cd-gpios = <&gpio2 0 0>;
 				wp-gpios = <&gpio2 1 0>;
 				status = "okay";

arch/arm/boot/dts/imx6q.dtsi

@@ -97,18 +97,23 @@
 		dma-apbh@00110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
+			clocks = <&clks 106>;
 		};
 
 		gpmi-nand@00112000 {
-		       compatible = "fsl,imx6q-gpmi-nand";
-		       #address-cells = <1>;
-		       #size-cells = <1>;
-		       reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
-		       reg-names = "gpmi-nand", "bch";
-		       interrupts = <0 13 0x04>, <0 15 0x04>;
-		       interrupt-names = "gpmi-dma", "bch";
-		       fsl,gpmi-dma-channel = <0>;
-		       status = "disabled";
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 13 0x04>, <0 15 0x04>;
+			interrupt-names = "gpmi-dma", "bch";
+			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
+				 <&clks 150>, <&clks 149>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			fsl,gpmi-dma-channel = <0>;
+			status = "disabled";
 		};
 
 		timer@00a00600 {
@@ -150,6 +155,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
 					interrupts = <0 31 0x04>;
+					clocks = <&clks 112>, <&clks 112>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -159,6 +166,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
 					interrupts = <0 32 0x04>;
+					clocks = <&clks 113>, <&clks 113>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -168,6 +177,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
 					interrupts = <0 33 0x04>;
+					clocks = <&clks 114>, <&clks 114>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -177,6 +188,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
 					interrupts = <0 34 0x04>;
+					clocks = <&clks 115>, <&clks 115>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -186,6 +199,8 @@
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 35 0x04>;
+					clocks = <&clks 116>, <&clks 116>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -193,6 +208,8 @@
 					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 0x04>;
+					clocks = <&clks 160>, <&clks 161>;
+					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
@@ -205,6 +222,7 @@
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
+					clocks = <&clks 178>;
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <38 37>;
 					status = "disabled";
@@ -214,6 +232,7 @@
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
+					clocks = <&clks 179>;
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <42 41>;
 					status = "disabled";
@@ -223,6 +242,7 @@
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
+					clocks = <&clks 180>;
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <46 45>;
 					status = "disabled";
@@ -362,20 +382,22 @@
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 0x04>;
-				status = "disabled";
+				clocks = <&clks 0>;
 			};
 
 			wdog@020c0000 { /* WDOG2 */
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 0x04>;
+				clocks = <&clks 0>;
 				status = "disabled";
 			};
 
-			ccm@020c4000 {
+			clks: ccm@020c4000 {
 				compatible = "fsl,imx6q-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <0 87 0x04 0 88 0x04>;
+				#clock-cells = <1>;
 			};
 
 			anatop@020c8000 {
@@ -472,12 +494,14 @@
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 0x04>;
+				clocks = <&clks 182>;
 			};
 
 			usbphy2: usbphy@020ca000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 0x04>;
+				clocks = <&clks 183>;
 			};
 
 			snvs@020cc000 {
@@ -514,86 +538,207 @@
 				/* shared pinctrl settings */
 				audmux {
 					pinctrl_audmux_1: audmux-1 {
-						fsl,pins = <18   0x80000000	/* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
-							    1586 0x80000000	/* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
-							    11   0x80000000	/* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
-							    3    0x80000000>;	/* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+						fsl,pins = <
+							18   0x80000000	/* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+							1586 0x80000000	/* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+							11   0x80000000	/* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+							3    0x80000000	/* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							101 0x100b1	/* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+							109 0x100b1	/* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+							94  0x100b1	/* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+						>;
+					};
+				};
+
+				enet {
+					pinctrl_enet_1: enetgrp-1 {
+						fsl,pins = <
+							695 0x1b0b0	/* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
+							756 0x1b0b0	/* MX6Q_PAD_ENET_MDC__ENET_MDC */
+							24  0x1b0b0	/* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+							30  0x1b0b0	/* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+							34  0x1b0b0	/* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+							39  0x1b0b0	/* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+							44  0x1b0b0	/* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+							56  0x1b0b0	/* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+							702 0x1b0b0	/* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+							74  0x1b0b0	/* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+							52  0x1b0b0	/* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+							61  0x1b0b0	/* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+							66  0x1b0b0	/* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+							70  0x1b0b0	/* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+							48  0x1b0b0	/* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+						>;
+					};
+
+					pinctrl_enet_2: enetgrp-2 {
+						fsl,pins = <
+							890 0x1b0b0	/* MX6Q_PAD_KEY_COL1__ENET_MDIO */
+							909 0x1b0b0	/* MX6Q_PAD_KEY_COL2__ENET_MDC */
+							24  0x1b0b0	/* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+							30  0x1b0b0	/* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+							34  0x1b0b0	/* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+							39  0x1b0b0	/* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+							44  0x1b0b0	/* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+							56  0x1b0b0	/* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+							702 0x1b0b0	/* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+							74  0x1b0b0	/* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+							52  0x1b0b0	/* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+							61  0x1b0b0	/* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+							66  0x1b0b0	/* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+							70  0x1b0b0	/* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+							48  0x1b0b0	/* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+						>;
 					};
 				};
 
 				gpmi-nand {
 					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-						fsl,pins = <1328 0xb0b1		/* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
-							    1336 0xb0b1		/* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
-							    1344 0xb0b1		/* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
-							    1352 0xb000		/* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
-							    1360 0xb0b1		/* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
-							    1365 0xb0b1		/* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
-							    1371 0xb0b1		/* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
-							    1378 0xb0b1		/* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
-							    1387 0xb0b1		/* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
-							    1393 0xb0b1		/* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
-							    1397 0xb0b1		/* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
-							    1405 0xb0b1		/* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
-							    1413 0xb0b1		/* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
-							    1421 0xb0b1		/* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
-							    1429 0xb0b1		/* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
-							    1437 0xb0b1		/* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
-							    1445 0xb0b1		/* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
-							    1453 0xb0b1		/* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
-							    1463 0x00b1>;	/* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+						fsl,pins = <
+							1328 0xb0b1	/* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
+							1336 0xb0b1	/* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
+							1344 0xb0b1	/* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
+							1352 0xb000	/* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
+							1360 0xb0b1	/* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
+							1365 0xb0b1	/* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
+							1371 0xb0b1	/* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
+							1378 0xb0b1	/* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
+							1387 0xb0b1	/* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
+							1393 0xb0b1	/* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
+							1397 0xb0b1	/* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
+							1405 0xb0b1	/* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
+							1413 0xb0b1	/* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
+							1421 0xb0b1	/* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
+							1429 0xb0b1	/* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
+							1437 0xb0b1	/* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
+							1445 0xb0b1	/* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
+							1453 0xb0b1	/* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
+							1463 0x00b1	/* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+						>;
 					};
 				};
 
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
-						fsl,pins = <137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
-							    196 0x4001b8b1>;	/* MX6Q_PAD_EIM_D28__I2C1_SDA */
+						fsl,pins = <
+							137 0x4001b8b1	/* MX6Q_PAD_EIM_D21__I2C1_SCL */
+							196 0x4001b8b1	/* MX6Q_PAD_EIM_D28__I2C1_SDA */
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							1140 0x1b0b1	/* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
+							1148 0x1b0b1	/* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
+						>;
 					};
 				};
 
-				serial2 {
-					pinctrl_serial2_1: serial2grp-1 {
-						fsl,pins = <183 0x1b0b1		/* MX6Q_PAD_EIM_D26__UART2_TXD */
-							    191 0x1b0b1>;	/* MX6Q_PAD_EIM_D27__UART2_RXD */
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							183 0x1b0b1	/* MX6Q_PAD_EIM_D26__UART2_TXD */
+							191 0x1b0b1	/* MX6Q_PAD_EIM_D27__UART2_RXD */
+						>;
+					};
+				};
+
+				uart4 {
+					pinctrl_uart4_1: uart4grp-1 {
+						fsl,pins = <
+							877 0x1b0b1	/* MX6Q_PAD_KEY_COL0__UART4_TXD */
+							885 0x1b0b1	/* MX6Q_PAD_KEY_ROW0__UART4_RXD */
+						>;
+					};
+				};
+
+				usbotg {
+					pinctrl_usbotg_1: usbotggrp-1 {
+						fsl,pins = <
+							1592 0x17059	/* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
+						>;
+					};
+				};
+
+				usdhc2 {
+					pinctrl_usdhc2_1: usdhc2grp-1 {
+						fsl,pins = <
+							1577 0x17059	/* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
+							1569 0x10059	/* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
+							16   0x17059	/* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
+							0    0x17059	/* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
+							8    0x17059	/* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
+							1583 0x17059	/* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
+							1430 0x17059	/* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
+							1438 0x17059	/* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
+							1446 0x17059	/* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
+							1454 0x17059	/* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
+						>;
 					};
 				};
 
 				usdhc3 {
 					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
-							    1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
-							    1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
-							    1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
-							    1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
-							    1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
-							    1265 0x17059	/* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
-							    1257 0x17059	/* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
-							    1249 0x17059	/* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
-							    1241 0x17059>;	/* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+						fsl,pins = <
+							1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+							1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
+							1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+							1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+							1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+							1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+							1265 0x17059	/* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+							1257 0x17059	/* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+							1249 0x17059	/* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+							1241 0x17059	/* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+						>;
+					};
+
+					pinctrl_usdhc3_2: usdhc3grp-2 {
+						fsl,pins = <
+							1273 0x17059	/* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+							1281 0x10059	/* MX6Q_PAD_SD3_CLK__USDHC3_CLK	*/
+							1289 0x17059	/* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+							1297 0x17059	/* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+							1305 0x17059	/* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+							1312 0x17059	/* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+						>;
 					};
 				};
 
 				usdhc4 {
 					pinctrl_usdhc4_1: usdhc4grp-1 {
-						fsl,pins = <1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
-							    1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
-							    1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
-							    1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
-							    1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
-							    1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
-							    1493 0x17059	/* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
-							    1501 0x17059	/* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
-							    1509 0x17059	/* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
-							    1517 0x17059>;	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+						fsl,pins = <
+							1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+							1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
+							1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+							1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+							1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+							1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+							1493 0x17059	/* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+							1501 0x17059	/* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+							1509 0x17059	/* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+							1517 0x17059	/* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+						>;
 					};
-				};
 
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <101 0x100b1		/* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
-							    109 0x100b1		/* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
-							    94  0x100b1>;	/* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+					pinctrl_usdhc4_2: usdhc4grp-2 {
+						fsl,pins = <
+							1386 0x17059	/* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+							1392 0x10059	/* MX6Q_PAD_SD4_CLK__USDHC4_CLK	*/
+							1462 0x17059	/* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+							1470 0x17059	/* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+							1478 0x17059	/* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+							1486 0x17059	/* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+						>;
 					};
 				};
 			};
@@ -612,6 +757,9 @@
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 0x04>;
+				clocks = <&clks 155>, <&clks 155>;
+				clock-names = "ipg", "ahb";
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
 			};
 		};
 
@@ -635,7 +783,9 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <0 43 0x04>;
+				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
 
@@ -643,7 +793,9 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <0 40 0x04>;
+				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};
 
@@ -651,6 +803,8 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
 
@@ -658,13 +812,24 @@
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 0x04>;
+				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
 
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks 162>;
+			};
+
 			ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
+				clocks = <&clks 117>, <&clks 117>;
+				clock-names = "ipg", "ahb";
 				status = "disabled";
 			};
 
@@ -677,6 +842,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 0x04>;
+				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -684,6 +851,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 0x04>;
+				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -691,6 +860,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 0x04>;
+				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -698,6 +869,8 @@
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 0x04>;
+				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
 			};
 
@@ -707,6 +880,7 @@
 				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <0 36 0x04>;
+				clocks = <&clks 125>;
 				status = "disabled";
 			};
 
@@ -716,6 +890,7 @@
 				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a4000 0x4000>;
 				interrupts = <0 37 0x04>;
+				clocks = <&clks 126>;
 				status = "disabled";
 			};
 
@@ -725,6 +900,7 @@
 				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
 				reg = <0x021a8000 0x4000>;
 				interrupts = <0 38 0x04>;
+				clocks = <&clks 127>;
 				status = "disabled";
 			};
 
@@ -788,6 +964,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
 				interrupts = <0 27 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -795,6 +973,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
 				interrupts = <0 28 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -802,6 +982,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
 				interrupts = <0 29 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -809,6 +991,8 @@
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
 				interrupts = <0 30 0x04>;
+				clocks = <&clks 160>, <&clks 161>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/kirkwood-dnskw.dtsi

@@ -25,6 +25,16 @@
 		};
 	};
 
+	gpio_fan {
+		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+		compatible = "gpio-fan";
+		gpios = <&gpio1 14 1
+			 &gpio1 13 1>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+	};
+
 	ocp@f1000000 {
 		sata@80000 {
 			status = "okay";

arch/arm/boot/dts/kirkwood-dockstar.dts

@@ -0,0 +1,57 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "data";
+				reg = <0x0500000 0xfb00000>;
+			};
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -12,7 +12,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)";
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
 		linux,initrd-start = <0x4500040>;
 		linux,initrd-end   = <0x4800000>;
 	};
@@ -30,7 +30,37 @@
 			clock-frequency = <200000000>;
 			status = "ok";
 		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0xc0000>;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			partition@100000 {
+				label = "zImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@540000 {
+				label = "initrd";
+				reg = <0x540000 0x300000>;
+			};
+
+			partition@980000 {
+				label = "boot";
+				reg = <0x980000 0x1f400000>;
+			};
+		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -69,4 +99,22 @@
 			gpios = <&gpio1 16 0>;
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+			debounce-interval = <100>;
+		};
+	};
 };

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -0,0 +1,105 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "env";
+				reg = <0xa0000 0x20000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x100000 0x300000>;
+			};
+
+			partition@400000 {
+				label = "uInitrd";
+				reg = <0x540000 0x1000000>;
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 0>;
+			linux,default-trigger = "default-on";
+		};
+		health_led1 {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 0>;
+		};
+		health_led2 {
+			label = "status:white:health_led";
+			gpios = <&gpio1 4 0>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 0>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		Power {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio0 14 1>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio0 12 1>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <133>;
+			gpios = <&gpio1 3 1>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-km_kirkwood.dts

@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "ok";
+			chip-delay = <25>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood.dtsi

@@ -14,7 +14,8 @@
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x4000000>;
+		ranges = <0x00000000 0xf1000000 0x4000000
+		          0xf5000000 0xf5000000 0x0000400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -105,5 +106,14 @@
 			clock-frequency = <100000>;
 			status = "disabled";
 		};
+
+		crypto@30000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x30000 0x10000>,
+			      <0xf5000000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			status = "okay";
+		};
 	};
 };

arch/arm/boot/dts/mmp2.dtsi

@@ -26,6 +26,11 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
 		axi@d4200000 {	/* AXI */
 			compatible = "mrvl,axi-bus", "simple-bus";
 			#address-cells = <1>;

arch/arm/boot/dts/msm8660-surf.dts

@@ -7,7 +7,7 @@
 	compatible = "qcom,msm8660-surf", "qcom,msm8660";
 	interrupt-parent = <&intc>;
 
-	intc: interrupt-controller@02080000 {
+	intc: interrupt-controller@2080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
@@ -15,6 +15,23 @@
 		      < 0x02081000 0x1000 >;
 	};
 
+	timer@2000004 {
+		compatible = "qcom,msm-gpt", "qcom,msm-timer";
+		interrupts = <1 1 0x301>;
+		reg = <0x02000004 0x10>;
+		clock-frequency = <32768>;
+		cpu-offset = <0x40000>;
+	};
+
+	timer@2000024 {
+		compatible = "qcom,msm-dgt", "qcom,msm-timer";
+		interrupts = <1 0 0x301>;
+		reg = <0x02000024 0x10>,
+		      <0x02000034 0x4>;
+		clock-frequency = <6750000>;
+		cpu-offset = <0x40000>;
+	};
+
 	serial@19c400000 {
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,

arch/arm/boot/dts/msm8960-cdp.dts

@@ -0,0 +1,41 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm MSM8960 CDP";
+	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller@2000000 {
+		compatible = "qcom,msm-qgic2";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0x02000000 0x1000 >,
+		      < 0x02002000 0x1000 >;
+	};
+
+	timer@200a004 {
+		compatible = "qcom,msm-gpt", "qcom,msm-timer";
+		interrupts = <1 2 0x301>;
+		reg = <0x0200a004 0x10>;
+		clock-frequency = <32768>;
+		cpu-offset = <0x80000>;
+	};
+
+	timer@200a024 {
+		compatible = "qcom,msm-dgt", "qcom,msm-timer";
+		interrupts = <1 1 0x301>;
+		reg = <0x0200a024 0x10>,
+		      <0x0200a034 0x4>;
+		clock-frequency = <6750000>;
+		cpu-offset = <0x80000>;
+	};
+
+	serial@19c400000 {
+		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+		reg = <0x16440000 0x1000>,
+		      <0x16400000 0x1000>;
+		interrupts = <0 154 0x0>;
+	};
+};

arch/arm/boot/dts/omap2420-h4.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap2.dtsi"
+/include/ "omap2420.dtsi"
 
 / {
 	model = "TI OMAP2420 H4 board";

arch/arm/boot/dts/omap2420.dtsi

@@ -0,0 +1,48 @@
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2420", "ti,omap2";
+
+	ocp {
+		omap2420_pmx: pinmux@48000030 {
+			compatible = "ti,omap2420-padconf", "pinctrl-single";
+			reg = <0x48000030 0x0113>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <8>;
+			pinctrl-single,function-mask = <0x3f>;
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,hwmods = "mcbsp2";
+		};
+	};
+};

arch/arm/boot/dts/omap2430.dtsi

@@ -0,0 +1,92 @@
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2430", "ti,omap2";
+
+	ocp {
+		omap2430_pmx: pinmux@49002030 {
+			compatible = "ti,omap2430-padconf", "pinctrl-single";
+			reg = <0x49002030 0x0154>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <8>;
+			pinctrl-single,function-mask = <0x3f>;
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <64>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>, /* RX interrupt */
+				     <61>; /* RX overflow interrupt */
+			interrupt-names = "common", "tx", "rx", "rx_overflow";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp@4808c000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808c000 0xff>;
+			reg-names = "mpu";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
+
+		mcbsp4: mcbsp@4808e000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808e000 0xff>;
+			reg-names = "mpu";
+			interrupts = <18>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <19>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+		};
+	};
+};

arch/arm/boot/dts/omap3-beagle.dts → arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -7,16 +7,44 @@
  */
 /dts-v1/;
 
-/include/ "omap3.dtsi"
+/include/ "omap36xx.dtsi"
 
 / {
-	model = "TI OMAP3 BeagleBoard";
-	compatible = "ti,omap3-beagle", "ti,omap3";
+	model = "TI OMAP3 BeagleBoard xM";
+	compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
 
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
 };
 
 &i2c1 {
@@ -27,11 +55,17 @@
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
 
-		vsim: regulator@10 {
+		vsim: regulator-vsim {
 			compatible = "ti,twl4030-vsim";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <3000000>;
 		};
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
 	};
 };
 
@@ -67,3 +101,15 @@
 &mmc3 {
 	status = "disabled";
 };
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};

arch/arm/boot/dts/omap3-evm.dts

@@ -17,6 +17,15 @@
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
 };
 
 &i2c1 {
@@ -46,3 +55,7 @@
 		reg = <0x5c>;
 	};
 };
+
+&twl_gpio {
+	ti,use-leds;
+};

arch/arm/boot/dts/omap3-overo.dtsi

@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		overo {
+			label = "overo:blue:COM";
+			gpios = <&twl_gpio 19 0>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+	status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+	bus-width = <4>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};

arch/arm/boot/dts/omap3-tobi.dts

@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/include/ "omap3-overo.dtsi"
+
+/ {
+	model = "TI OMAP3 Gumstix Overo on Tobi";
+	compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc3 {
+	status = "disabled";
+};

arch/arm/boot/dts/omap3.dtsi

@@ -17,7 +17,6 @@
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
-		serial3 = &uart4;
 	};
 
 	cpus {
@@ -69,6 +68,24 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		omap3_pmx_core: pinmux@48002030 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x48002030 0x05cc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+
+		omap3_pmx_wkup: pinmux@0x48002a58 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x48002a58 0x5c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+
 		gpio1: gpio@48310000 {
 			compatible = "ti,omap3-gpio";
 			ti,hwmods = "gpio1";
@@ -141,12 +158,6 @@
 			clock-frequency = <48000000>;
 		};
 
-		uart4: serial@49042000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap3-i2c";
 			#address-cells = <1>;
@@ -220,5 +231,74 @@
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
 		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+		};
+
+		mcbsp2: mcbsp@49022000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49022000 0xff>,
+			      <0x49028000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>, /* RX interrupt */
+				     <4>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <1280>;
+			ti,hwmods = "mcbsp2";
+		};
+
+		mcbsp3: mcbsp@49024000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49024000 0xff>,
+			      <0x4902a000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <22>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>, /* RX interrupt */
+				     <5>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+		};
+
+		mcbsp4: mcbsp@49026000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49026000 0xff>;
+			reg-names = "mpu";
+			interrupts = <23>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <27>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			interrupt-parent = <&intc>;
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+		};
 	};
 };

arch/arm/boot/dts/omap36xx.dtsi

@@ -0,0 +1,25 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	ocp {
+		uart4: serial@49042000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+	};
+};

arch/arm/boot/dts/omap4-panda.dts

@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
 
 / {
 	model = "TI OMAP4 PandaBoard";
@@ -126,3 +127,13 @@
 	ti,non-removable;
 	bus-width = <4>;
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};

arch/arm/boot/dts/omap4-sdp.dts

@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
 
 / {
 	model = "TI OMAP4 SDP board";
@@ -18,7 +19,7 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	vdd_eth: fixedregulator@0 {
+	vdd_eth: fixedregulator-vdd-eth {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_ETH";
 		regulator-min-microvolt = <3300000>;
@@ -28,7 +29,7 @@
 		regulator-boot-on;
 	};
 
-	vbat: fixedregulator@2 {
+	vbat: fixedregulator-vbat {
 		compatible = "regulator-fixed";
 		regulator-name = "VBAT";
 		regulator-min-microvolt = <3750000>;
@@ -115,6 +116,33 @@
 	};
 };
 
+&omap4_pmx_core {
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0xd8 0x118	/* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
+			0xda 0		/* uart2_rts.uart2_rts OUTPUT | MODE0 */
+			0xdc 0x118	/* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
+			0xde 0		/* uart2_tx.uart2_tx OUTPUT | MODE0 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x100 0x118	/* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
+			0x102 0		/* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
+			0x104 0x100	/* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
+			0x106 0		/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			0x11c 0x100	/* uart4_rx.uart4_rx INPUT | MODE0 */
+			0x11e 0		/* uart4_tx.uart4_tx OUTPUT | MODE0 */
+		>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
@@ -226,3 +254,98 @@
 	bus-width = <4>;
 	ti,non-removable;
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <0x00000012	/* KEY_E */
+			0x00010013	/* KEY_R */
+			0x00020014	/* KEY_T */
+			0x00030066	/* KEY_HOME */
+			0x0004003f	/* KEY_F5 */
+			0x000500f0	/* KEY_UNKNOWN */
+			0x00060017	/* KEY_I */
+			0x0007002a	/* KEY_LEFTSHIFT */
+			0x01000020	/* KEY_D*/
+			0x01010021	/* KEY_F */
+			0x01020022	/* KEY_G */
+			0x010300e7	/* KEY_SEND */
+			0x01040040	/* KEY_F6 */
+			0x010500f0	/* KEY_UNKNOWN */
+			0x01060025	/* KEY_K */
+			0x0107001c	/* KEY_ENTER */
+			0x0200002d	/* KEY_X */
+			0x0201002e	/* KEY_C */
+			0x0202002f	/* KEY_V */
+			0x0203006b	/* KEY_END */
+			0x02040041	/* KEY_F7 */
+			0x020500f0	/* KEY_UNKNOWN */
+			0x02060034	/* KEY_DOT */
+			0x0207003a	/* KEY_CAPSLOCK */
+			0x0300002c	/* KEY_Z */
+			0x0301004e	/* KEY_KPLUS */
+			0x03020030	/* KEY_B */
+			0x0303003b	/* KEY_F1 */
+			0x03040042	/* KEY_F8 */
+			0x030500f0	/* KEY_UNKNOWN */
+			0x03060018	/* KEY_O */
+			0x03070039	/* KEY_SPACE */
+			0x04000011	/* KEY_W */
+			0x04010015	/* KEY_Y */
+			0x04020016	/* KEY_U */
+			0x0403003c	/* KEY_F2 */
+			0x04040073	/* KEY_VOLUMEUP */
+			0x040500f0	/* KEY_UNKNOWN */
+			0x04060026	/* KEY_L */
+			0x04070069	/* KEY_LEFT */
+			0x0500001f	/* KEY_S */
+			0x05010023	/* KEY_H */
+			0x05020024	/* KEY_J */
+			0x0503003d	/* KEY_F3 */
+			0x05040043	/* KEY_F9 */
+			0x05050072	/* KEY_VOLUMEDOWN */
+			0x05060032	/* KEY_M */
+			0x0507006a	/* KEY_RIGHT */
+			0x06000010	/* KEY_Q */
+			0x0601001e	/* KEY_A */
+			0x06020031	/* KEY_N */
+			0x0603009e	/* KEY_BACK */
+			0x0604000e	/* KEY_BACKSPACE */
+			0x060500f0	/* KEY_UNKNOWN */
+			0x06060019	/* KEY_P */
+			0x06070067	/* KEY_UP */
+			0x07000094	/* KEY_PROG1 */
+			0x07010095	/* KEY_PROG2 */
+			0x070200ca	/* KEY_PROG3 */
+			0x070300cb	/* KEY_PROG4 */
+			0x0704003e	/* KEY_F4 */
+			0x070500f0	/* KEY_UNKNOWN */
+			0x07060160	/* KEY_OK */
+			0x0707006c>;	/* KEY_DOWN */
+	linux,input-no-autorepeat;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+};